LANDING LEG HARDWARE Chassis & Trailers: Dry & Reefer Van / Flatbed / Auto.
|
|
- Joshua Daniels
- 5 years ago
- Views:
Transcription
1 Chassis & Trailers: Dry & Reefer Van / Flatbed / Auto
2 Sand Shoes (Low- & High-Profile) Low-Profile Sand Shoes Fab. Steel / Finish Buffers Part # Size Gusset Patch Sides Base Add l notes Fleet Eng. # Holland # K/W # Penz # Toca # x 10 None n/a 4 GA. 7 GA. Flared Hole n/a x 10 None 1/4 7 GA. 7 GA n/a n/a A x 10 None 1/4 1/4 1/4 n/a n/a x 10 Double 1/4 1/4 1/4 n/a DG x 10 None 3/16 3/16 3/16 n/a n/a n/a x 10 None 1/4 1/4 1/4 n/a n/a n/a x 12 None 1/4 7 GA. 7 GA n/a n/a n/a x 12 None n/a 1/4 3/16 n/a n/a n/a n/a x 12 None 1/4 1/4 1/4 n/a & n/a x 10 Low-Profile x 10 Low-Profile High-Profile Sand Shoes Fab. Steel / Finish Buffers Part # Size Gusset Patch Sides Base Add l notes Fleet Eng. # Holland # Penz # Toca # x 4.5 None n/a 1/4 1/4 Dolly Wheel Foot n/a LG x 10 None n/a 5/16 3/16 n/a XA-V-796-WS n/a n/a x 10 Single n/a 7 GA. 7 GA. Flared Hole LG AF x 10 Single n/a 1/4 7 GA. n/a n/a n/a x 10 Single 1/4 1/4 7 GA. n/a LG A x 10 Double n/a 1/4 1/4 Flared Hole n/a n/a n/a x 10 Double 1/4 1/4 7 GA. n/a n/a n/a x 10 Double 1/4 1/4 1/4 n/a x 10 None 1/4 1/4 1/4 For Holland Mark V, n/a n/a n/a n/a x 10 Single n/a 3/16 3/16 Flared Hole n/a LG n/a x 10 Single n/a 1/4 7/32 n/a LG0050 n/a x 10 Single n/a 1/4 1/ x 10 High-Profile x 10 High-Profile Flared Hole, For Holland Mark V n/a n/a n/a n/a x 10 Double 1/4 1/4 1/4 n/a n/a x 12 Single n/a 1/4 7 GA. Flared Hole n/a n/a x 12 Double n/a 3/16 3/16 Flared Hole n/a n/a n/a x 12 Double n/a 1/4 1/4 Flared Hole n/a n/a x 12 Double 1/4 1/4 1/4 n/a n/a [ 2 ] Place your order now:
3 Sand Shoe Kits (High-Profile) High-Profile Sand Shoe Kits Buffers Part # Includes Sand Shoe Includes Axle Includes Fastener(s) Add l notes Holland # S-F Solid Axle A Spring Pins (2 ea.) One roll pin fitted, one taped to axle n/a H-F Hollow Axle A Spring Pins (2 ea.) One roll pin fitted, one taped to axle n/a S-F Solid Axle A Spring Pins (2 ea.) One roll pin fitted, one taped to axle n/a H-F Hollow Axle A Spring Pins (2 ea.) One roll pin fitted, one taped to axle n/a KIT-P Hollow Axle Locking Clip RK-V KIT-P Solid Axle Locking Kit RK-V-315 Sand Shoe Axles & Axle Housings 1304-KIT 2775-KIT 1303-KIT-F 1407-KIT-F Axle Kits Axles: Fab. Steel / Finish Buffers Part # Axle Description Length Material Kit Includes Locking Hardware: Holland # Penz # Other # KIT-F HD w/ welded cap 8 1-1/2 SCH KIT KIT Solid 8-1/4 1-7/8 Solid Steel A (x2) XA-V n/a n/a Fleet Eng Toca KIT HD 8-1/4 1-7/8 Seamless Steel A (x2) XA-V n/a Toca KIT Solid w/ welded cap 8-3/8 1-7/8 Solid Steel KIT n/a Toca KIT-F Std. Duty w/ welded cap 8-1/2 1-1/2 SCH KIT Fleet Eng Toca A KIT-F Extra HD w/ welded cap 8-1/2 1-1/2 SCH KIT Toca KIT Solid 8-13/16 1-7/8 Solid Steel KIT LG (axle) KIT-F Std. Duty w/ flared end 8-7/8 1-1/2 SCH KIT n/a KIT-F HD w/ flared end 8-7/8 1-1/2 SCH KIT Toca KIT Solid w/ welded sq. cap 8-7/8 1-7/8 Solid Steel KIT n/a n/a KIT-F Std. Duty w/ welded cap 15-3/8 1-1/2 SCH KIT n/a n/a Toca FLRTW-1 Fleet Eng Toca FLR KIT-F HD w/ welded cap 15-3/8 1-1/2 SCH KIT n/a Fleet Eng KIT Solid, for Dolly Wheel Ft. 15-7/8 1-7/8 Solid Steel KIT LG (axle) n/a KIT Solid 16-1/2 1-7/8 Solid Steel KIT LG (axle) Toca /2 x 5 Base Plate Axle Housings Fab. Steel / Finish Buffers Part # Base Plate / Tube Fleet Eng. # Holland # New Life / TrailCo # Penz # Toca # /2 x 5 / 2-3/8 O.D A /2 x 5-1/2 / 2-3/8 O.D. n/a n/a n/a n/a Place your order now: [ 3 ]
4 Crank Handles & Keepers»» Steel w/ primer finish»» Ø1-1/4 O.D.»» 14 gauge tubing Buffers Part# Description Fleet Engineers # Holland # Jost # Penz # Toca # Crank Handle, Horizontal n/a n/a n/a H n/a Crank Handle, Horizontal n/a n/a H n/a /4 Crank Handle, Horizontal n/a H n/a Crank Handle, Horizontal n/a H Crank Handle, Horizontal n/a H Crank Handle, Vertical n/a n/a n/a V Crank Handle, Vertical n/a n/a n/a V n/a Crank Handle, Vertical n/a V Crank Handle, Vertical n/a V Crank Handle, Vertical n/a V /8 Crank Handle, Vertical n/a XA-V-90-0 C n/a /8 Crank Handle, Vertical n/a XA-V-90-2 C n/a n/a /4 Crank Handle, Vertical n/a XA-V-90-5 C n/a /4 Crank Handle, Vertical n/a XA-V C n/a /4 Crank Handle, Vertical n/a XA-V n/a n/a n/a Keeper for Crank Handle n/a n/a n/a Keeper for Crank Handle, Spring Steel n/a XB-LG0085, n/a Place your order now: [ 4 ]
5 Crank Handle Shafts, Shift Shafts & Jack Shafts Crank Handle Shaft Binkley, 1 x 19-1/ KIT Shift Shaft Gear Assembly Jost A-400 / 401 / 440 Leg Crank Handle Shift Shaft Axle for Austin Constant Mesh Round Leg Crank Handle Shift Shaft Axle for Holland Mark V Heavy Duty Landing Leg Buffers Part# Description Austin # Binkley # Holland # Jost # Shift Shaft, Universal Mount, 1" x 19-1/4" n/a LG Series 50000, 51000, 4700 Kysor Westran # Penz # n/a n/a Shaft, 1 x 19-5/ n/a n/a n/a Shift Shaft, 1 x 19-9/16 Constant Mesh, Round n/a n/a Shaft, 1 x 15-1/ n/a n/a Shaft, 1 x 10-5/ n/a n/a n/a n/a Shift Shaft, No Gear, 1 x n/a n/a n/a Shift Shaft for Holland 150 Leg n/a n/a XA A n/a n/a Shift Shaft for Holland 150 Leg n/a n/a XA C-402 n/a n/a Shift Shaft Axle for Holland Mark V Leg n/a n/a XA-V A n/a n/a n/a Jack Shaft Axle for Holland Mark V Leg n/a n/a XA-V A n/a n/a n/a KIT Shift Shaft Geared Assembly for Jost Leg n/a n/a n/a B10285 SER n/a n/a [ 5 ] Place your order now:
6 Turning Shafts & Assemblies Adjustable Turning Shaft Assembly Adjustable Turning Shaft Assemblies & Components Adjustable Turning Shaft Assembly Buffers Part# Description Fleet Engineers # Holland # Penz # Toca # Adjustable Turning Shaft Assembly (37 56 ): 1 Center Tube 1299-A + 2 End Tubes 1299-B Adjustable Turning Shaft Assembly (53 72 ): 1 Center Tube 1478-A + 2 End Tubes 1299-B A Center Tube (36 ) 1.5 O.D. x 14 GA, 1.25 I.D n/a n/a A Center Tube (52 ) 1.5 O.D. x 14 GA, 1.25 I.D n/a n/a B End Tube (12 ) 1.25 O.D. x 14 GA w/ 7/16 x 3/4 slot n/a n/a Turning Shaft 65, One-piece type One-piece Turning Shafts Turning Shaft 69, One-piece type Buffers Part# Length Fleet Engineers # Holland # Jost # Penz # Toca # /2 (1-1/4 O.D. x 14 GA) n/a n/a n/a n/a /8 (1 SCH 40 / Heavy Duty) n/a n/a n/a (1-1/4 O.D. x 14 GA) n/a LG n/a /4 (1-1/4 O.D. x 14 GA) n/a n/a n/a n/a (1-1/4 O.D. x 14 GA) LG n/a (1 SCH 40 / Heavy Duty) n/a n/a n/a n/a Place your order now: [ 6 ]
7 Adjustable Braces Standard Duty End Tube: Ø 21/32 / 16.5 MM Hole, Reinforced End Buffers Part# Length Center Tube End Tube (1) Fleet Eng. # Holland # Penz # Toca # /4 O.D. x 15 GA 1-1/2 O.D. x 14 GA n/a n/a n/a /4 O.D. x 15 GA 1-1/2 O.D. x 14 GA /4 O.D. x 15 GA 1-1/2 O.D. x 14 GA /4 O.D. x 15 GA 1-1/2 O.D. x 14 GA /4 O.D. x 15 GA 1-1/2 O.D. x 14 GA n/a n/a Medium Duty End Tube: Ø 21/32 / 16.5 MM Hole, Reinforced End Buffers Part# Length Center Tube End Tube (1) Fleet Eng. # Holland # Penz # Toca # /8 O.D. x 13 GA 1-5/8 O.D. x 13 GA n/a n/a /8 O.D. x 13 GA 1-5/8 O.D. x 13 GA n/a n/a /8 O.D. x 13 GA 1-5/8 O.D. x 13 GA n/a n/a Heavy Duty Buffers Part# Length Center Tube End Tube (1) Fleet Eng. # Holland # Penz # Toca # O.D. x 10 GA 1-5/8 O.D. x 11 GA n/a n/a O.D. x 10 GA 1-5/8 O.D. x 11 GA n/a n/a O.D. x 10 GA 1-5/8 O.D. x 11 GA n/a n/a End Tube: Ø 21/32 / 16.5 MM Hole, Reinforced End Extra Heavy Duty for SeaLand End Tubes: Ø 21/32 / 16.5 MM Hole, Reinforced Ends Buffers Part# Length Center Tube End Tubes (2) Fleet Eng. # Holland # Penz # Toca # SCH 40 Pipe 2 O.D. x 7 GA n/a n/a n/a SCH 40 Pipe 2 O.D. x 7 GA n/a n/a n/a SCH 40 Pipe 2 O.D. x 7 GA n/a SCH 40 Pipe 2 O.D. x 7 GA w/ chamfered ends n/a SCH 40 Pipe 2 O.D. x 7 GA n/a SCH 40 Pipe 2 O.D. x 7 GA n/a [ 7 ] Place your order now:
8 Fixed Braces Medium Duty w/ Chamfered Ends Buffers Part# Length (CL-CL) Tube Specs Holland # Penz # /8 O.D. x 13 GA LG P n/a /8 O.D. x 13 GA LG P /8 O.D. x 13 GA LG P n/a /8 1-7/8 O.D. x 13 GA LG P n/a /4 1-7/8 O.D. x 13 GA LG P n/a /2 1-7/8 O.D. x 13 GA LG P n/a /4 1-7/8 O.D. x 13 GA LG P n/a /2 1-7/8 O.D. x 13 GA LG P n/a /16 1-7/8 O.D. x 13 GA LG P n/a /4 1-7/8 O.D. x 13 GA LG P n/a Ø 21/32 / 16.5 MM Holes, Reinforced End Heavy Duty w/ Chamfered Ends Buffers Part# Length (CL-CL) Tube Specs Holland # Penz # O.D. x 7 GA, chamfered ends 1.9 O.D., x 7 GA, SCH 80 pipe, primer LG LG Ø 21/32 / 16.5 MM Holes, Reinforced End Angled Braces 3/16 -thick Steel Buffers Part# Length (CL-CL) Dimensions Finish Trailmobile # Wabash # /2 L-Channel /16 L-Channel w/ 2 chamfered corners 31-1/2 L-Channel w/ 2 chamfered corners 24-1/2 x 1-13/16 x 1-13/16 Black n/a 13S /16 x 2 x 1-1/2 HDG L n/a 33-1/4 x 2 x 1-1/2 HDG A n/a Ø 11/16 / 17.5 MM drilled holes Ø 5/8 / 16 MM drilled holes Cross Brace 3/16 -thick Steel Buffers Part# Length (CL-CL) Dimensions Finish Wabash # C-Channel 62-1/2 x 2-5/8 x 1-13/16 Black Weldable 13S00544 Ø 3/4 / 19 MM Holes Place your order now: [ 8 ]
9 K-Braces & Skirts/Supports (Wing-Type) K-Braces w/o Brackets Fab. Steel / Finish Buffers Part# Width Holland # Wabash # Universal Universal n/a K-Braces w/ End Brackets Fab. Steel / Finish Buffers Part# Width Holland # Penz # Trailmobile # /8 n/a n/a / A8-9-1 K-Braces w/ Wing Brackets 3/16 Fab. Steel / Finish Buffers Part# Width Great Dane # Penz # US-KIT 64-1/8, U.S.-made / Wing-Type Skirts & Supports (listed in alpha order by OEM) Buffers Part# OEM Item / Material / Finish Dimensions Molded Knockouts Cross Reference # CS RS Cheetah CS / RS Wing Skirt 3/16 Fab. Steel / W 27-5/8 x H 13-1/8 x 2-5/8 side lips N/A New Life (CS) / (RS) Penz XX, Strick AD-14C (CS) / AD-14C (RS) Hyundai Lower Wing Support 3/16 Fab. Steel / W 23-5/8 x H 17-17/32 x 2-1/4 side lips 1 large Ø3-21/32 hole N/A 6380-CS Cheetah-style 2788 Hyundai-style [ 9 ] Place your order now:
10 Mounting Brackets (Wing-Type) 1606 Miller-style 2998-CS/-RS Utility-style 1607-CS/-RS Trailmobile-style Wing-Type Mounting Brackets listed in alpha order by OEM Buffers Part# OEM Material / Finish Dimensions Mounting Holes Cross Reference # CS RS CS RS CS RS CS RS CS RS CS RS CS RS CS RS CS RS CS RS CS RS CS RS CS RS Fruehauf FCF Great Dane (CS) (RS) Hyundai (CS) (RS) Hyundai (CS) (RS) Miller Monon V09-189B-CS V09-189A-RS Pines PINES PILGB 1314R (CS) PINES PILGB 1314L (RS) Pines PINES PILGB 1315R (CS) PINES PILGB 1315L (RS) Pines GB4382R (CS) GB4382L (RS) Strick (CS), (RS) Strick AA13D Strick AA14D (CS) AA14D (RS) Trailmobile CS / -RS Trailmobile Utility (CS) (RS) Wabash WAB13S00047 (CS) WAB13S00048 (RS) Wabash 13S01022-CS / -RS 5/32 Fab. Steel / 3/16 Fab. Steel / HDG 10 GA Fab. Steel / 10 GA Fab. Steel / 1/8 Fab. Steel / 1/8 Fab. Steel / 3/16 Fab. Steel / W 47 x H 9-5/8 x 2 top/side lips W 48 x H 13 x 1-3/4 top lip W 60 x H 24 x 2 side lips W 48 x H 24 x 1-3/4 side lips W 48 x H 11-3/4 x 2-1/2 top lip W 48 x H 11-3/8 x 2 top lip W 39-1/8 x H 26 x 1-7/8 side lips W 50-1/2 x H 26 x 1-7/8 top lip W 50-1/2 x H 23-1/2 x 2 side lips W 48 x H 10-11/16 x 1-1/2 top lip & 2 side lips W 48 x H 12-21/32 x 2-1/4 top lip & 1-5/8 side lips W 50 x H 10-5/8 x 2-1/8 top lip & 1-1/2 side lips W 50-1/2 x H 11-1/2 x 3-1/2 top lip W 62-1/2 x H 25-1/2 x 3-1/2 top lip W 48-1/8 x H 23-3/8 x 1-3/32 top lip & 2-1/4 side lips W 48 x H 8-1/2 x 1-7/8 top lip W 48 x H 9-1/4 x 2 top & bottom lips 8 ea. Ø21/32 /16.5mm holes & 1 large rounded square hole 15 ea. Ø5/8 /16mm holes & 1 large pentagonal hole 18 ea. Ø11/16 /17.5mm holes & 1 large pentagonal hole 17 ea. Ø5/8 /16mm holes, 2 ea. Ø5/16 /8mm holes, 1 ea. large hexagonal & triangular holes 14 ea. Ø21/32 /16.5mm holes & 10 ea. Ø11/16 /17.5mm holes & 3 larger holes 11 ea. Ø17/32 /13.5mm holes & 14 ea. Ø17/32 /13.5mm holes & 17 ea. Ø17/32 /13.5mm holes & 10 ea. Ø11/16 /17.5mm holes & 12 ea. Ø11/16 /17.5mm holes & 10 ea. Ø11/16 /17.5mm holes & 14 ea. Ø21/32 /16.5mm holes & 14 ea. Ø21/32 /16.5mm holes & 8 ea. Ø17/32 /13.5mm holes & 5 larger 4-27/32 /123mm holes 10 ea. Ø21/32 /16.5mm holes & 3 larger holes 10 ea. Ø11/16 /17.5mm holes & large rounded square hole Penz Holland (CS) / (RS), Penz XX, New Life/TrailCo (CS) / (RS) N/A N/A Holland , Penz Penz XX, New Life R (CS) / -L (RS) Penz XX Penz XX N/A Penz XX Penz XX Penz XX Holland (CS) / (RS), Penz XX, New Life 4-A1-224-R (CS) / 4-A1-224-L (RS), Toca (CS) / (RS) Holland , Penz Vanguard UT (CS) / UT (RS) Penz XX, New Life R (CS) / L (RS) N/A Place your order now: [ 10 ]
11 Mounting Brackets (U-Type) 2999-CS Utility style Loadcraft style U-Type Mounting Brackets (Short) listed in order by width Buffers Part# Material / Finish Dimensions Mounting Holes Penz # CS RS /8 Fab. Steel / for Utility Chassis, # /8 Fab. Steel / for Utility Chassis, # /8 Fab. Steel / for Great Dane Trailers 3/8 Fab. Steel / for Loadcraft Chassis W 8-7/8 x L 12 x 5 flared tri. lip W 8-7/8 x L 12 x 5 flared tri. lip 8 ea. Ø9/16 /14mm holes & 1 large bell-shaped hole CS 8 ea. Ø9/16 /14mm holes & 1 large bell-shaped hole RS W 10 x L 10-1/2 x 6-3/4 lip 10 ea. Ø11/16 /17.5mm holes & 1 large pentagonal hole W 10-1/4 x L 13-1/8 x 8-1/4 lip 10 ea. Ø21/32 /16.5mm holes, 1 large Ø3 hole & 2 large Ø3-1/2 holes on sides w/ notched corners /8 Fab. Steel / W 11-3/4 x L 12 x 3-1/2 lip 10 ea. Ø21/32 /16.5mm holes & 1 large Ø5 hole /8 Fab. Steel / for ACL Chassis, Holland # , New Life # W 11-3/4 x L 12 x 5 lip 10 ea. Ø21/32 /16.5mm holes & 1 large Ø3 hole /4 Fab. Steel / W 11-3/4 x L 12 x 6 lip 10 ea. Ø21/32 /16.5mm holes Ajax / Hercules style 8254 Hyundai style 8045 Cheetah style U-Type Mounting Brackets (Long) listed in order by length Buffers Part# Material / Finish Dimensions Mounting Holes /4 Fab. Steel / for Hyundai Chassis 1/4 Fab. Steel / for Ajax & Hercules Chassis 1/4 Fab. Steel / for Cheetah Chassis 1/4 Fab. Steel / for Cheetah Chassis Holland # , New Life # /4 Fab. Steel / for Hyundai Chassis, # L 23-5/8 x 10-1/2 x 8-13/32 lip L 24 x W 10-1/2 x 6-3/4 lip L 25-1/16 x W 10-15/32 x 7-7/8 lip L 25-3/4 x W 10-1/2 x 7-7/8 lip L 27 x W 10-15/32 x 6-7/8 lip 12 ea. Ø21/32 /16.5mm holes, 1 large pentagonal hole & 2 large Ø3-3/4 side holes 10 ea. Ø21/32 /16.5mm holes, 1 large pentagonal hole & 2 large Ø4 side holes 10 ea. Ø11/16 /17.5mm holes, 1 large pentagonal hole & 2 large Ø4 side holes 12 ea. Ø21/32 /16.5mm holes, 1 large pentagonal hole & 2 large Ø3-3/4 side holes 10 ea. Ø21/32 /16.5mm holes, 1 large pentagonal hole & 2 large Ø3-3/4 side holes [ 11 ] Place your order now:
12 Brace Lugs 1306 for Square Leg 2642 for Great Dane Buffers Part# Material / Finish Dimensions Description Holland # Penz # Other Cross-Ref /8 Steel / 4-1/4 /4-1/4 x 1-5/8 /1-5/8 x 2 2-hole for Square Leg, A /8 Steel / 5-1/8 /5-1/8 x R2-3/4 x 2 2-hole for Round Leg, Curved A Fleet Engineers , Kysor/Westran , TrailCo T-L-J4890 Kysor/Westran TrailCo T-L-J /8 Steel / 5-1/2 x R2-3/4 x 2 1-hole, Curved N/A A N/A /8 Steel / 2-5/8 x 2 1-hole, Short N/A A Fleet Engineers /8 Steel / 3-1/2 x 4 x 2 1-hole, T-shape N/A N/A /8 Steel / 10 x 2 x 1 2-hole, 90+90, off-center TrailCo T-L /8 Steel / 10 x 2 x 1 2-hole, N/A /8 Steel / 9-1/4 x 2 2-hole, Straight N/A /8 Steel / 6-7/8 x 2-3/4 x 2 2-hole, L-shape, A N/A /8 Steel / 8-13/32 x 2 2-hole, Straight A N/A /8 Steel / 2-3/4 x 2-3/4 x 2 1-hole, L-shape, A Fleet Engineers , Toca , TrailCo T-L /8 Steel / 3-1/4 x 2-1/4 x 2 2-hole, L-shape, Toca /8 Steel / 9-1/2 x 2 3-hole, Straight N/A /8 Steel / 4-7/8 /4-7/8 x 2 /2 x 2 2-hole, N/A A TrailCo T-L /8 Steel / 7-5/8 x 2 2-hole, Straight A N/A /8 Steel / 9-3/4 x 2 x 1 2-hole, Universal N/A /8 Steel / 5-1/8 /5-1/8 x 2-1/4 /2-1/4 x 2 2-hole, 90+90, Universal N/A A Cheetah /8 Steel / 8 x 3 1-hole Rectangle Great Dane /8 Steel / 9-1/2 x 3 1-hole Quadrilateral Great Dane /8 Steel / 13 x 4-1/2 2-hole Trapezoid Great Dane /8 Steel / 10-1/16 x 2 x 1 2-hole, N/A Austin /4 Steel / 3-3/8 x 1-7/8 x 2 1-hole, L-shape, 90 N/A N/A /16 Steel / 3 x 2 x 2 1-hole, L-shape, 90, beveled ends N/A Kysor/Westran /8 Steel / 10-1/4 x 2 2-hole, Flat Kysor/Westran, Jost JOSC /8 Steel / 4-3/8 /4-3/8 x R2 x 2 2-Hole for Round Leg (Curved) N/A N/A N/A /8 Steel / 9-1/4 x 2 x 1 2-Hole, Universal N/A 02-25/MOD N/A /8 Steel / 5-1/4 /5-1/4 x 2-1/2 /2-1/2 x 2 2-Hole for Jost A400/A401 Square Leg N/A Jost J0SC10108, Utility JOC /16 Steel / 10 x 2 2-Hole, Straight N/A N/A /8 Steel 4-3/8 /4-3/8 x 1-7/8 /1-7/8 x 2 2-Hole for Square Leg XA-V-1938 N/A TrailCo T-L-XA-V /8 Steel / 5-5/16 /5-5/16 x R2-1/2 x 2 2-Hole for Round Leg (Curved) /8 Steel / 4-5/16 /4-5/16 x 1-1/2 /1-1/2 x 2 2-Hole, LG0266 N/A N/A /4 Steel / 3-1/8 x 2-3/16 x 2 1-Hole, Curved N/A B N/A /4 Steel / 4-7/8 /4-7/8 x 2 /2 x 2 2-Hole, N/A B N/A /8 Steel / 6 x 4 x 4 V-shape, Universal N/A A N/A /8 Fab. Steel / Black Austin J-4154, Fleet Engineers , Holland BL-4, Kysor/Westran 9-3/4 x 3 2-Hole, Rectangle for Square Leg N/A N/A Wabash 13S00018 [ 12 ] Place your order now:
13 Other Braces & Brackets 2015-A Upper Angle Bracket 2015-B Lower C-Bracket K-Brace Brackets Buffers Part # Material / Finish Dimensions Description Fits A 3/16 Steel / Red 9-1/4 x 4 x 2 Upper Angle Bracket, 4 holes Buffers , & Penz , B 3/16 Steel / Red 9-3/8 x 4-3/4 x 2 Lower C-Bracket, 4 holes Buffers , & Penz , Other Braces Buffers Part# Material / Finish Dimensions Description Cross-Ref for Holland Mark V 7603 for Wabash /16 Steel / Red 3-1/2 x 3-1/2 Brace Lug Plate for Holland Mark V Leg Holland LG /4 Fab. Steel / Red 7 x 6 Upper Brace Connection, 1-hole Wabash 13S /4 Fab. Steel / Red 6-1/2 x 4 Lower Brace Connection, 1-hole Wabash 13S /8 Fab. Steel / Black 5-1/2 x 3-1/16 Brace Ear, 1-Hole, Diagonal Wabash 13S00547 Covers (Landing Leg & Gearbox) 2398 for Holland for Austin-K/W 6466 for Jost 2-speed Landing Leg Covers (Fab. Steel w/ finish) Buffers Part# Description Dimensions Cross-Ref Square, for Atlas 55 & Holland 150 Legs 4-5/8 x 4-5/8 x 5/8 Holland XA Round, for Austin-Kysor/Westran Lift Pak R5-1/8 x 1/2 Kysor/Westran Square, for all 2-speed Jost Gearbox Legs 5-1/2 x 5-1/2 x 1-1/16 Jost C Square, for all 1-speed Jost Slave Legs 5-1/2 x 5-1/2 x 5/8 Jost C for Jost 1-speed 2758 for Holland 150 leg 6527 for Holland 4700, 4701, legs Gearbox Covers Buffers Part# Material / Finish Dimensions Description Cross-Ref Fab. Steel / 3-1/2 x 3-1/2 2 Holes, for Holland 150 Leg Holland XA A Fab. Steel / Self-color 7 x 6 3 Holes, for Holland 4700, 4701 & Legs Holland XB-LG 0663 Place your order now: [ 13 ]
14 The Nation s Premier Intermodal Hardware Supplier Providing the Industry with Quality Products for Over 30 Years Detroit VA Los Angeles Houston Jacksonville Buffers USA is Known for: Quality Parts Competitive Pricing High Fill Rates National Distribution Network Jacksonville, FL Houston, TX Detroit, MI Los Angeles, CA sales@buffersusa.com Web:
Landing Gear Accessories
RIGHT QUALITY RIGHT PRICE RIGHT AWAY Landing Gear Accessories www.goldlinequalityparts.com Edition 2016-02 powered by Introduction, Warranty and Contact Information... 1 Crank Handles 7/8" Dia. Shaft Crank
More informationAssembly Instructions. -Cantilever Boat Lifts
Assembly Instructions -Cantilever Boat Lifts Winch Instruction Page Safety Information 1. The winch is built for the multipurpose of hauling and lifting operations. It is not to be used as a hoist for
More informationCoulter Assemblies & Guide Wheels
Section 00-0 Coulter Assemblies & Guide Wheels Straight Leg Coulter Assemblies Curved Leg Coulter Assemblies 4 Leg Coulter Assemblies Smooth Blade Coulters Norwest Torsion Spring Notched Blade Coulters
More informationTR-AUGER. Section C INDEX BOOT / HOPPER
INDEX Section C TR-AUGER BOOT / HOPPER Description Page TR80 / TR100 x 51' basic auger... C2-3 TR80 / TR100 x 61' basic auger... C4-5 TR80 / TR100 x 71' basic auger... C6-7 TR Swing hopper... C8-9 TR-Boot
More informationSLEEVE AND COLLAR MOUNT FREESTALLS
SLEEVE AND COLLAR MOUNT FREESTALLS FREESTALLS-1 FEATURES Hot dipped galvanized or pre-galvanized loop option. Heavy galvanized 3 1/2 post Easy installation Adjustable height Cow friendly loop profile to
More information- Written price quotations are valid for 30 days from the date of the quote unless otherwise noted.
SPECIFICATIONS - All material is solid brass with a #8 mirror finish unless otherwise noted. - All material sold by length is priced in one foot increments. ORDERING PROCEDURE - Use a Purchase Order number.
More informationReplaces Lesco 300 & 500 Parts Cutting Unit
Replaces Lesco 300 & 500 Parts 3A 11 10 10 11 17 3 1 15 2 13 1 20 1 20 1 21 2 2 22 1B 30 1A 10 14 31 25 23 24 10 4 27 23 25 26 14 24 10 13A 5 5A 4A 16 0 R&R Reels Available, Lifetime Guaranteed 1 R50271
More informationWELL COMPLETION & PROTECTION. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD
WELL COMPLETION & PROTECTION MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com WELL COMPLETION & PROTECTION TABLE OF CONTENTS TABLE OF CONTENTS (FLUSHMOUNTS)... 2-5 MONITORING
More informationRev B, 03/2012 Page 1 of 8
Rev B, 03/2012 Page 1 of 8 www.topendwheelchair.com (800) 532-8677 (727) 522-8677 fax: (727) 522-1007 Force X: Fork Assembly 1 (Page 3) 1 Fork Weldment, Force X 2 1166337 1 Brake Caliper Set (Front & Rear)
More informationBARRIER OFFSET 0" A 6" 6" A 12" 12" A 26" A 26" 3A OR 4A L OR S * ** L OR S L OR S
ACCEPTABLE (TCB) TYPES AND ANCHORING DETAILS BASED ON UNDERLYING SURFACE TYPE AND BARRIER OFFSET FROM DROP-OFF BARRIER OFFSET UNDERLYING SURFACE 0" A 6" 6" A 12" 12" A 26" A 26" TCB TYPE DETAIL TCB TYPE
More informationInstallation Instructions
116-3027, 116-3017 X-Pando Adjustable Steel Protector Installation Instructions 1404 N. Marshall Ave. El Cajon CA. 92020 For technical support call us at (800) 368-3075 NB 6/28/10 607-0112 Step 1. Mounting
More informationSERIES 2 RAMP OWNER S MANUAL TOOLS REQUIRED: BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup.
SERIES 2 RAMP OWNER S MANUAL BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup. Use caution and care for your back when lifting, pushing, pulling, folding or unfolding
More informationThis document will provide detailed specifications, a bill of materials (BOM), and assembly instructions for the Official Competition Field.
This document will provide detailed specifications, a bill of materials (BOM), and assembly instructions for the Official Competition Field. Please note that this field utilizes the VEX IQ Challenge Field
More informationSpeciÞcations. Engine Dimensions Dimensions in millimeters. Inch equivalents shown in [].
SpeciÞcations Engine Dimensions Dimensions in millimeters. Inch equivalents shown in []. Ê ßÔ Ê ÛÝ Ñ Ê Û ÎÊ Û É 5 ENGINE IDENTIFICATION NUMBERS Kohler engine identiþcation numbers (model, speciþcation
More informationTechnical information for hinges
451 452 Technical information for hinges In the tables on the following pages are listed a large range of hinge variations. Many more variations are possible if hinges with guide tabs are required i.e.
More informationFootball Equipment. 5 9/16" Gooseneck Goalposts
5 9/16" Gooseneck Goalposts Football Equipment FB55CG 5 9/16" Gooseneck College Goalposts Applies also to FB55CG-SY and FB55CG-WT Goalposts shall meet all NCAA rules. Goalposts shall be of the single bent
More informationQUALITY ALUMINUM BOAT LIFTS, INC. INSTRUCTIONS. Dominator Lake Lift
INSTRUCTIONS Dominator Lake Lift PHONE:251-986-3882 * FAX:251-986-3136 QABLDOMINATORINST.2014 P a g e 1 Quality Aluminum Boat Lifts, INC. Installation Instructions: Dominator Lake Lift Thank you for your
More informationDetroit Speed, Inc. A-body Rear Coilover Conversion Kit A-body (Moser Rear Axle) P/N: , , , , ,
Detroit Speed, Inc. A-body Rear Coilover Conversion Kit 1964-1972 A-body (Moser Rear Axle) P/N: 042411, 042412, 042413, 042417, 042418, 042419 The Detroit Speed, Inc. A-body Rear Coilover Conversion Kit
More informationShop online Phone: (800) Fax: (866) Page449. Jacks & Components
Shop online www.wholesaletrailer.com Phone: (800) 400-5275 Fax: (866) 400-5275 Page449 Jacks 5th Wheel A: Mfg. Item Number Alias number Description SO A 75340 75333 Jack 6K 5th Wheel Manual Pair Atwood
More informationTRAILMATE METEOR ASSEMBLY MANUAL
TRAILMATE METEOR ASSEMBLY MANUAL (DISC BRAKE VERSION) The Trailmate Meteor recumbent has been designed for easy assembly. This means more time to enjoy the smooth ride with single speed, 3 speed coaster
More informationSign Frames & Accessories. Eastern Metal Supply Quality Shapes In Aluminum. 12 Fixed Retainer Sign Frame x 24 6 SF-12R
Signage EMS has an extensive stock of sign frames, raceways & raceway lids, retainers, flex face signage, double tees, half-round posts, and a full line of aluminum standards including Square Tube (Standards
More informationExtension Platform. Base Platform. Crossover. Exit railing. Exit Railing
Base Platform Galvanized With metal grate and two brackets Railing on the long side and a face side Extension Platform Galvanized With metal grate and one bracket Railing on the long side with rail connection
More informationTSX1600L Rite-Lock Power Arm Kit, left Stowing W/One Top Mount Pivot W/20" Base & 27" Upper
Ref TSX1600L Tarp System, Left Stowing Top Mount W/ Long Upper SN:TS 1 1 10210 Gear Motor, Tarp Stretcher w/5 Year Warranty 24V - S/N: TS 1 2 103810L Pivot, Assembled Front Arm for 103796 Power Kit Passenger
More informationPD The Gledhill Road Machinery Co. ALWAYS INCLUDE SERIAL NO. OF PLOW WHEN ORDERING PARTS
REF. 6309-A2 1 1 5421-AA BUMPER ANGLE 2 1 16209-DA STD. LOWER PUSH 3 1 13604-C LIFT BEAM 4 1 SEE ORDER LIFT CYLINDER 5 1 F-105-1 ANGLE 6 2 5280-B1 GUSSET 7 2 5279-B AXLE MTG. HOOK 8 2 13232-A24 AXLE MTG.
More informationParts Manual. Scraper Hitches PH:
Parts Manual Scraper Hitches 12-18 1 Table of Contents A123299 Swivel Hitch 3 A1063527 Super Swivel Hitch 4 A125056 Yoke Hitch 5 A125057 Super Capacity Hitch 6 A125223 MDU Hitch 7 A123224 360 Swivel Hitch
More informationRev A, 10/2012 Page 1 of 8
Rev A, 10/2012 Page 1 of 8 www.topendwheelchair.com Rev A, 10/2012 Page 2 of 8 www.topendwheelchair.com (800) 532-8677 (727) 522-8677 fax: (727) 522-1007 Force RX: Fork/Cranks Assembly Date: Phone: Fax:
More informationReproduction. Not for 27" & 29" TWO STAGE INTERMEDIATE SNOWTHROWERS Parts Manual for M1227E M1227EX M1529E
Parts Manual for 27" & 29" TWO STAGE INTERMEDIATE SNOWTHROWERS 2011 Model No. Description 1696001 M1227E 1696002 M1227EX 1696003 M1529E Briggs & Stratton Yard Power Products Group 535 Macon Road McDonough,
More information3/8" Safety Cable Systems
3/8" Safety Cable Systems Ladder-Mount 3/8" Cable System (No Slider) Kits include appropriate length of aircraft cable, top and bottom support brackets, 12" tensioning turnbuckle, tension spring, and all
More informationAMUSEMENT EMPORIUM TM. Rubber Rings And Parts
USA-Made Exclusively For AE AMUSEMENT EMPORIUM TM Rubber Rings And Parts USA-Made Exclusively For AE USA Made! W0693 Black Bumper Sleeve 23-6556 W0684 Yellow Bumper Sleeve 23-6552 Plunger Tips Black R0064
More informationOlympic Flat Bench with weight set
Project: Olympic Flat Bench With Weight Set Page 1 of 33 Olympic Flat Bench with weight set NOTE: The measurements within this text and 2D documentation are given both in millimeters and inches (in brackets).
More informationRev D. Feb2012 Page 1 of 6
Rev D. Feb2012 Page 1 of 6 www.topendwheelchair.com (800) 532-8677 (727) 522-8677 fax: (727) 522-1007 Force: Fork Assembly PART PER NUMBER BIKE 1 1145998 1 Fork, Force (incl: fork, 4 bolts) -Serial# Required-
More informationDetroit Speed, Inc. Rear Coilover Conversion Kit Camaro/Firebird P/N: &
Detroit Speed, Inc. Rear Coilover Conversion Kit 1982-02 Camaro/Firebird P/N: 042440 & 042441 The Detroit Speed Inc., Rear Coilover Conversion Kit allows the latest in coilover spring/shock technology
More informationMini Channel & Fittings
Our mini channels and fittings provide for an economical method of supporting light load requirements on a strut system. Channel Channels are cold formed on our modern rolling mills from 18 Ga. (1.2 mm)
More informationChannel Bracket Support Cable Bracket Bearer Locking Pin Foundation Bolt Iron Anchor Step Manhole Sump Grill PVC/Steel Ladder Ladder Support & Hook
Manhole Accessories Channel Bracket Support Cable Bracket Bearer Locking Pin Foundation Bolt Iron Anchor Step Manhole Sump Grill PVC/Steel Ladder Ladder Support & Hook Manhole Guard Lifter Manhole Ventilator
More informationCAISSON SHAFT SYSTEM
CAISSON SHAFT SYSTEM Installation Guide INSTALLATION GUIDE FOR DN2000 TO DN3660 UNITS PLATE JOINTING SYSTEM This guide is to be used for the Installation of CPM Group Ltd caisson shaft units which use
More informationInvacare Top End Parts Catalog
Invacare Top End Parts Catalog T Titanium Top End Frames / Standard Parts Pre- July 2009 20 22 0 2 Pre- July 2009 9 2 2 Pre- July 2009 9 2 Titanium Head Tube Assembly see Casters / Forks on pg. 4 4 4 see
More informationSub-Base Assembly For Type-ML 32 & VR-1 Step Voltage Regulator Single-Phase Liquid-Filled Part # GEK 35171
Transformer Business Department Regulator & Inductive Products Sub-Base Assembly For Type-ML 32 & VR-1 Step Voltage Regulator Single-Phase Liquid-Filled Part # GEK 35171 Last Update 11-19-2013 Tom Dauzat,
More informationATHLETICS Track & Field Equipment
ATHLETICS Track & Field Equipment Aluminium Curbing Order No. 11260 The aluminium curbing is made from special made anodized aluminium profiles. It is a mobile marker and separator of the running track.
More informationSection 12. Chassis Equipment
AUSTRALIAN Section 12 S-12 Chassis Equipment Jockey Wheels & Stands U Bolts Jockey Wheel Receivers Brake Kits Bearings Axles Springs Adjustable Legs Permanent Fixed Steps Ladders Jerry Can Holders Jerry
More informationRev J Terminator Parts Book Page 1 of 15 Top End
1181387 Rev J.2016.03.22 Terminator Parts Book Page 1 of 15 Top End 1181387 Rev J.2016.03.22 Terminator Parts Book Page 2 of 15 Top End (800) 532-8677 (727) 522-8677 fax: (727) 522-1007 Terminator: Frame
More information2.4M Viking Swing Basket Swing
.M Viking Swing Basket Swing PROD. CODE SIZE AGE RANGE F/ FALL HEIGHT HEAVIEST PART TOTAL WEIGHT 75x75x150 5 to Adult 1.5 Metres Approx 6Kg Approx 198Kg SPECIFICATION Solid steel components to EN 10087:1998
More informationPRINTED: 3/29/2016 1:46:12 PM - THIS DOCUMENTATION IS OBSOLETE AFTER: 3/30/2016 1:46 PM
1181377 Rev H.2016.03.14 Force G Parts Book Page 1 of 7 Top End INTED: 3/29/2016 1:46:12 PM - THIS DOCUMENTATION IS OBSOLETE AFTER: 3/30/2016 1:46 PM INTED: 3/29/2016 1:46:12 PM - THIS DOCUMENTATION IS
More informationReservoir End Covers Type EC
Other Reservoir ccessories imensions / Technical ata / Order odes Reservoir End overs Type E H Ø2 Ø1 7 Gauge Steel haracteristics Materials End cover made of 7 Grade Steel (pickled and oiled); Stainless
More informationAdvantage Lockers & Bike
Advantage Lockers & Bike Advantage Bike Racks & Lockers Inc. is the #1 supplier of Storage Lockers and Bike Racks to the Lower Mainland s residential construction industry. With 25+ years of experience
More informationResidential Fence Tubing
Residential Fence Tubing RESIDENTIAL FENCE TUBING Approximate Pieces Price Per Foot Size O.D. Item# Gauge Weight Per Foot Per Lift Cut Less Lift Lift 1 3/8 PE 20100-18.67 91 1.30 1.13 1 3/8 Swedge 20200-18.67
More informationAssembly Instructions for the Rolling Harrow and Board Turbo-Till 6/26/03
Assembly Instructions for the Rolling Harrow and Board Turbo-Till 6/26/03 Your initial action is to locate the correct drag frame [(61) 589-107H through 589-116H]. Bolt the drag frame to the rear drag
More informationThank you for purchasing a Porta-Dock product! *Please read and follow these instructions step by step*
PG 1 OF 9 PORTA-DOCK, INC. 74A ABL/APW 1056 & 44A FLB APW 1056 PORTA-LIFT Thank you for purchasing a Porta-Dock product! *Please read and follow these instructions step by step* STEP 1. Separate and group
More informationBRONZE BUSHING REPLACEMENT PROCEDURE DN345 & NL450C
1 BRONZE BUSHING REPLACEMENT PROCEDURE V.2 12/3/2014 DN345 & NL450C 2 Safety Instructions Removing Walking Beams 3 1. Position spreader on a flat concrete surface capable of supporting weight of spreader
More informationRev D. May 12, 2011 Page 1 of 7
Rev D. May 12, 2011 Page 1 of 7 www.topendwheelchair.com (800) 532-8677 (727) 522-8677 fax: (727) 522-1007 Force R: Fork/Crank Assy 1 1153309 1 Fork, Force R (incl: fork, 2 clamps, 4 bolts, 4 nuts) -Serial
More informationMeter, PD Series, E3 A1, S1 and E4 S1 Prior to 2005 Parts List
Issue/Rev. 0.0 (2/13) Meter, PD Series, E3 A1, S1 and E4 S1 Prior to 2005 Parts List Bulletin PO01001 33 Pre 1994 39 32 31 21 Pre 1994 45 18 48 44 30 78 57 46 Note: Angled housing not shown. The Most Trusted
More informationRS Important Notes. Contact. Bicycle Maintenance Stand instructions manual. Warranty Period : 1 year (from the date of your purchase)
Warranty Period : 1 year (from the date of your purchase) RS-1700 Bicycle Maintenance Stand instructions manual (ver.1.2 2016/12) For more details, read the attached "Minoura Limited Warranty Policy" card.
More informationGUARD RAIL HEIGHT 42" STANDARD FIN. FLR. 12" MAX ANCHOR SPACING WILL DEPEND ON MOUNTING SUBSTRATE AND REGION OF PROJECT
FIN. FLR. STANDARD 8" TO 60" STD. PANEL WIDTH CRL SURFACE MOUNT TYPICAL GLASS RAILING ELEVATION VIEW - 8" TO 60" STD. PANEL WIDTH 1 MAX HORIZONTAL CAP RAIL TYPICAL BUTT JOINTS BETWEEN GLASS PANELS ANCHOR
More informationW A L D M A N U F A C T U R I N G C O M P A N Y, I N C.
A Axle & Nut Assemblies 22 Axle Sets 22 Axles 22 B Bars, Handle 12,13 Basket Fittings 10 Baskets 7,8,9,10 Bolts, Binder 15 Bolts, Expander 15 Bolts, Fork Crown 17 Bolts & Nuts, Assorted 21 Bolts & Nuts,
More informationRev A. 10/2012 Page 1 of 6
Rev A. 10/2012 Page 1 of 6 www.topendwheelchair.com (800) 532-8677 (727) 522-8677 fax: (727) 522-1007 Force CC Fork Assy Customer: Top End Sales Order: PART NUMBER 1 1166643 1 Fork, Force CC (incl: fork,
More informationImport Bike Rack OEM INSTALLATION MANUAL
Import ike Rack OEM INSTLLTION MNUL TLE OF ONTENTS System Information 2 Safety Information 2 Resources Required 3 Preparation 3 Under umper ttachment 3 Over umper ttachment 3 Installation 3 Under umper
More informationB104ZN BLTD 4H 90 L Bracket. Features. Material, Color, and Finish. Dimensions and Weight. Long Description
B104 BLTD 4H 90 L Bracket Cooper B-Line/Cable Tray Catalog Number Manufacturer Description Weight per unit Product Category Features Material Material, Color, and Finish Finish Dimensions and Weight Size
More informationBike Rack and Tire Carrier
Bike Rack and Tire Carrier OWNER'S MANUAL Rev: 10.26.2017 Page 1 Bike Rack and Tire Carrier Owners Manual TABLE OF CONTENTS System 2 Description 2 Prior To Operation 3 Manual Slide-Out Bike Rack Operation
More informationVERTICAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Tight Spaces UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
More informationSIF Exploded Views 10/3/2016
SIF Exploded Views 10/3/2016 Direct Drive Square Inline Fan 9-10 Direct Drive Square Inline Fan - Part Information Item # Description of Parts 9DD # 10DD # 9DD-SS # 10DD-SS # 1 Base SIF910DDBASE 1 SIF910DDBASE
More informationPer foot Prices. Chain Link. Iron Fence BUDGET FENCE COMPANY. us: (702) Gates (702) ' tall 8' tall. Automatic Gate Openers
BUDGET FENCE COMPANY Email us: Per foot Prices Chain Link from $6.00 per lin. ft. from $9.00 per lin. ft. ( includes wire, top rail, line posts, ties & loop caps) Materials Only Iron Fence from $20.00
More informationFibreglass, Resin, 5min Araldite, flock. The Strobe mounting point may have to be moved forward.
Fit Vertical Fin Extension Reference: Drawing Photos Parts Required: Materials Required: 3 Layer Plate Procedure: 1. Mark cutting area on Vertical Fin as per drawing & photos. 2. Make a ¼ hole in the corner
More informationINSTRUCTIONS 360 Y-DROP HAGIE STS 2015
INSTRUCTIONS 60 Y-DROP HAGIE STS 05 INSTRUCTIONS 60 Y-DROP HAGIE STS 05 INTRODUCTION Before beginning, it s important to know where each mounting bracket fits relative to the row spacing involved. The
More informationReplaces Lesco 300 & 500 Parts
Replaces Lesco 300 & 500 Parts ItemNo R&R PartNo PartNo Description Req. Qty Price R&R Reels Available, Lifetime Guaranteed 1 R502871 020800 R&R Reel, 9 Blade, Fits 300 1 32,100 1 R502871H R&R Only R&R
More informationSTOL CH rd Edition Drawings, dated April 16, 2012 Summary of changes from Edition 2 Revision 1 to Edition 3.
STOL CH 750 3 rd Edition Drawings, dated April 16, 2012 Summary of changes from Edition 2 Revision 1 to Edition 3. Page Date Drawing Title 75-G-0 04/12 Three View Drawing 1. Edition 3 75-G-1 04/12 Drawings
More informationRev. F, August 2015 Page 1 of 11 Top End
ev. F, August 205 Page of Top End ev. F, August 205 Page 2 of Top End (800) 532-8677 (727) 522-8677 fax: (727) 522-007 Force X: Crank Assembly PE BIKE DESCIPTION 27940 2 Brake Caliper Standard Carbon Wheel
More informationTUBE SIGN POST PRODUCTS
Western Canada TUBE Products Ltd. SIGN POST PRODUCTS Company Profile With over 100 years of experience on staff and the largest inventory in Western Canada, we have the ability to meet all your sign support
More information! CAUTION! ! WARNING! General Information
Great Plains Mfg., Inc. Installation Instructions Used with: 2SF24, 24-Foot Two-Section Drill General Information Two-Section, Hydraulic Folding Marker 2SF30, 30-Foot Two-Section Drill 2SBM30, 30-Foot
More informationDivider Systems. Rear Tire Divider (RTD) Section 4. Model Years Model Years Model Years
Divider Systems Rear Tire Divider (RTD) Section 4 Model Years 1988 1993... 2-3 Model Years 1994 1996... 4-5 Model Years 1997 2010... 6-7 Model Years 2011 Present, Upper... 8-9 Model Years 2011 Present,
More informationPage 1 of 1 04/19/13 SBR
Office of Roadway Engineering - Plan Insert Sheets Number Title Date Number Title Date Number Title Date 201015 Extension of Anchor Bolts 07/20/12 207000 Bikeway Pavement Marking Details 01/18/13 202010
More informationAssembly Instructions for the Rolling Harrow and Reel Turbo-Till 6/26/03
Assembly Instructions for the Rolling Harrow and Reel Turbo-Till 6/26/03 Your initial action is to locate the correct drag frame [(61) 589-107H through 589-116H]. Bolt the drag frame to the rear drag plates
More informationBike Rack and Spare Tire Carrier 1-1/4" Receiver
Bike Rack and Spare Tire Carrier 1-1/4" Receiver OWNER'S MANUAL Rev: 11.15.2017 Page 1 Bike Tire Carrier 1.25 Owners Manual TABLE OF CONTENTS Safety Information 2 Product Information 2 Installation 3 Installation
More informationTABLE OF CONTENTS PRODUCTS & INFORMATION
SHORING CATALO G TABLE OF CONTENTS PRODUCTS & INFORMATION PAGE HL SHORING FRAMES (10k/leg)...3 STEEL SHORING ACCESSORIES... 4 SHORING TOWER... 5 SHORING JACK... 6 SHORING FRAME ALLOWABLE WORKING LOADS...7
More informationOWNER'S MANUAL LOCK-N-LOAD BULLET FEEDER (PISTOL)
OWNER'S MANUAL LOCK-N-LOAD BULLET FEEDER (PISTOL) Table of Contents ASSEMBLY ASSEMBLY Pistol Bullet Feeder... Page 3 CHANGE-OVERS The Hornady Lock-N-Load Pistol Bullet Feeder is capable of feeding most
More informationRev S Terminator Parts Book Page 1 of 14 Top E nd
1181387 Rev S.2017.01.17 Terminator Parts Book Page 1 of 14 Top E nd 1181387 Rev S.2017.01.17 Terminator Parts Book Page 2 of 14 Top E nd Terminator: Frame Assembly PER CHAIR Frame Only: Aluminum for Folding
More information8MAY15 US RACK, Inc Falcon Drive, Madera, CA
8MAY15 US RACK, Inc. - 2850 Falcon Drive, Madera, CA 93637-559-661-3050 INSTRUCTIONS for Bedrail-mounted MOTORCYCLE RACK, Model 2001-4TRA WARNING: Do NOT attempt to install or use this rack without following
More informationReplaces Ryan Sod Cutter Parts
Replaces Ryan Sod Cutter Parts O.E.M 1 R250356 R&R Only R&R 12" Sod Cutter Blade, 1/4" x 2 1/2" 5,900 1 R250359 R&R Only R&R 15" Sod Cutter Blade, 1/4" x 2 1/2" 5,900 1 R250358 R&R Only R&R 16" Sod Cutter
More informationS NAME: MULTI TANK 4A CLIENT: VALLEY INDUSTRIES LLC. PAGE: BOM 1 OF 26 1:20. FILE: S:\JOB\5978\MT4A\5978-MT4A.asm
ITEM QTY MATERIAL CUT 1 CUT 2 PART NAME #/EACH P B 1 2 14 Ga-CS-FOLD 24 13.628 F1 BAFFLE 1 6.2 2 1 14 Ga-CS-FOLD 24 11.611 F2 BAFFLE 2 5.2 3 1 14 Ga-CS-FOLD 24 11.611 F3 BAFFLE 3 5.2 4 1 14 Ga-CS-FOLD
More informationCONSTRUCTOPEDIA NXT Kit 9797
CONSTRUCTOPEDIA NXT Kit 9797 Beta Version 2.0 August 17, 2007 Center for Engineering Educational Outreach Tufts University Table of Contents Simple Shapes and Structures. Page 3 Ways To Attach NXT Motors...
More informationTECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS 136 137 TECHNICAL SPECIFICATIONS GROUPSETS 138 SUPER 141 144 CHORUS 146 ATHENA 148 CENTAUR 10 veloce 12 pista 13 TIME TRIAL 14 COMP TRIPLE 1 CX WHEELS 16 Low / High-Profile 18
More informationSEADUCER BOATS GAS SPORT HYDRO
SEADUCER BOATS GAS SPORT HYDRO COME VISIT US ON THE WEB AT WWW.SEADUCERBOATS.COM 2 - Pkg. Of 440 push rod ends 2 - Pkg. of solder-on rod ends 2 -water outlet fitting 1-1/4" prop nut 1 -.250" x 30" flex
More informationType 73 Mast System TELESCOPIC & SECTIONAL MAST SYSTEMS
Type 73 Mast System TELESCOPIC & SECTIONAL MAST SYSTEMS Type 73 Mast System About us Clark Masts Systems has been designing and manufacturing telescopic and sectional mast systems for more than 50 years
More informationMeter, PD Series, E3 S1 and E4 S to Present Parts List
Issue/Rev. 0.0 (2/13) Meter, PD Series, E3 S1 and E4 S1 2005 to Present Parts List Bulletin PO01002 9 35 3 39 53 55 57 56 52 54 26 32 37 25 68 48 38 The Most Trusted Name In Measurement 5 31 7 44 42 16
More informationLock-N-Load. Bullet Feeder
Lock-N-Load Bullet Feeder table of contents steps Overview... 2 List of required hand tools... 2 1: Mounting the Bullet Feeder to the Bench... 3 2: Mounting the Bullet Feed Hopper... 4 3: Bullet Feed Hopper
More informationInstallation Instructions MODEL VSTI-A020 Tank Indicator Installation Model: VSTI-A020, Stainless Reverse Read System Versa Steel Inc. Guide Cables No
Tank Indicator Installation Model: VSTI-A020, Stainless Reverse Read System Guide Cables No Guide Cables 1 August 4, 2011 Assembly Instructions: (Shown with a 2 board, 12 ft kit) ITEM NO. PART NUMBER DESCRIPTION
More informationHere's the comparison of the stock rock shaft vs. a 3pt rock shaft.
This documents a build of a Category 0 3 point hitch for the John Deere 316 Onan, 318, 322, 330, 332, 420 and 430 tractors. This is Neil Koch's build for his 318. Here's the comparison of the stock rock
More informationFlat Bench. Use various tools and clamps in process of welding, so you could weld the items together with accuracy.
Project: Flat Bench Page 1 of 50 Flat Bench The measurements within this text and 2D documentation are given both in millimeters and inches (in brackets). This website is based on ISO measurement unit
More information3 AND 6 SIDE ARMS, STRAIGHT/TAPERED TOWER SECTIONS
A GENERAL TOWER & SITE ACCESSORIES 3 AND 6 SIDE ARMS, STRAIGHT/TAPERED TOWER SECTIONS 3 6 Tower Leg 2.38 O.D. x 5 Long Mounting Tube Tower Leg 2.38 O.D. x 5 Long Mounting Tube 3 Side Arm 6 Side Arm UNIVERSAL
More informationPAY N PAK, 1/12 th Scale, Limited Sport Hydro P Sport Hydro
1980 82 PAY N PAK, 1/12 th Scale, Limited Sport Hydro P Sport Hydro Introduction: The 1980 turbine Pay N Pak is a good subject for a model race boat. It has a low profile, mild pickle-fork setback, long
More informationHow to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø
Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note
More informationCHAIN LINK FENCE GATE
WALCOOM Walcoom Corporation CHAIN LINK FENCE GATE Chain link fence gate is a versatile product in many aspects, here, Walcoom provides buyers with sufficient strength and durability chain link fence gate
More informationREPAIR PARTS HYDRO GEAR TRANSAXLE - MODEL NUMBER
REPAIR PARTS HYDRO GEAR TRANSAXLE - MODEL NUMBER 319-0650 REPAIR PARTS HYDRO GEAR TRANSAXLE MODEL NUMBER 319-0650 NO. NO DESCRIPTION 1 532 14 29-30 Housing, Lower 2 532 14 29-31 Assembly, Upper Housing
More informationLivestock Equipment Bale Movers/ Bale Spears. Tractor Linkage. Grade 5 & 8 Hitch Pins. Tractor Linkage
Hooking a piece of equipment to your tractor? Our selection of hitch pins, locking pins, lift arm/top link parts, PTO adapters will keep things connected. Make sure you have an SMV sign to keep everyone
More informationInstallation Instructions for the AlphaDeck Staging System
Installation Instructions for the AlphaDeck Staging System Step 1 - Preparation A. Before setting up this system, determine the location of the stages and all the parts you will need. B. Read through the
More informationSERVCENTER, SERVCENTER II, SERVCENTER RACK
2005. All rights reserved. Black Box Corporation. Black Box Corporation 1000 Park Drive Lawrence, PA 15055-1018 Tech Support: 724-746-5500 www.blackbox.com e-mail: info@blackbox.com SERVCENTER, SERVCENTER
More informationHARDWARE. Push / Pulls... A Pivots... A Hinges, Locks and Cylinders... A Handles, Locks and Accessories... A4...
front line Table of Contents A4 1 HARDWARE Section Page Push / Pulls... A4... 2 Pivots... A4... 3 Hinges, Locks and Cylinders... A4... 4 Handles, Locks and Accessies... A4... 5 Exit Devices... A4... 6
More informationRev C Force 2 Parts Book Page 1 of 7 Top End
1181378 Rev C.2016.03.14 Force 2 Parts Book Page 1 of 7 Force 2: Fork Assembly Date: Customer: Ship to: PER BIKE DESCRIPTION 1 1166391 1 Fork, Force 2 (incl: fork, 4 bolts) -Serial# Required- Red Blue
More informationRev I Force RX Parts Book Page 1 of 12 Top End
1181374 Rev I.2016.03.24 Force RX Parts Book Page 1 of 12 Top End 1181374 Rev I.2016.03.24 Force RX Parts Book Page 2 of 12 Top End (800) 532-8677 (727) 522-8677 fax: (727) 522-1007 Force RX: Crank Assembly
More informationORNAMENTAL CANTILEVER GATE INSTRUCTIONS
U.S.A. Patent Number 5,36,83 ORNAMENTAL CANTILEVER GATE INSTRUCTIONS *NOTICE: Ornamental Cantilever Gates are supplied with rolls of 2 mesh safety screening in sufficient quantities to cover the entire
More informationSEADUCER BOATS GAS MONO COME VISIT US ON THE WEB AT
SEADUCER BOATS GAS MONO COME VISIT US ON THE WEB AT WWW.SEADUCERBOATS.COM 1 - Pkg. Of 440 push rod ends 1 - Pkg. of solder-on rod ends 2 -water outlet fitting 1-1/4" prop nut 1 -.250" x 24" flex shaft
More informationGACELA roller runners
INDEX roller runners 1... pp. 4 RUNNERS... ADJUSTABLE... FOR DOWEL-FIX DRAWER ASSEMBLY... QUICK ASSEMBLY... WITH ADJUSTABLE FRONT... FOR DROP-DOWN FRONT... 4 5 6 7 8 2 GACELA-3... 38 GACELA-3 RUNNERS...
More information