MACHINING OF VT FIRE RATED DOORS BY OTHERS
|
|
|
- Aron Hampton
- 6 years ago
- Views:
Transcription
1 MACHINING OF VT FIRE RATED DOORS BY OTHERS In der f another company to machine VT fire rated dos, the company must write a letter to VT requesting to become a licensed machiner of fire rated dos manufactured by VT and authized by Intertek/Warnock Hersey. VT will then fward this request to Intertek/Warnock Hersey advising them to send the requesting company VT machining specifications and set up said company as a licensed machiner of VT fire rated dos. Please refer to the sample request letter, "Request To Become VT Licensed Machiner Through Intertek/Warnock Hersey". Rev. 5/04 VT INDUSTRIES INC. ARCHITECTURAL WOOD DOORS INDUSTRIAL PARK P.O. BOX 490 HOLSTEIN, IA 51025
2 REQUEST TO BECOME VT LICENSED MACHINER THROUGH INTERTEK/WARNOCK HERSEY Type on Customer Letterhead Mr. Tom Hoffert VT Industries Inc. Architectural Wood Dos 1000 Industrial Park P.O. Bo 490 Holstein, IA RE: Machining of Fire Rated Dos Dear Mr. Hoffert: [INSERT Company Name] would like to become a licensed machiner of fire dos (minute through 90-minute) manufactured by VT Industries. We request an authization from Intertek/Warnock Hersey pending your approval. Sincerely, Rev. 5/04 VT INDUSTRIES INC. ARCHITECTURAL WOOD DOORS INDUSTRIAL PARK P.O. BOX 490 HOLSTEIN, IA 51025
3 FIRE DOOR CAPABILITY CHART - NEUTRAL PRESSURE Fire Rating 90- Ce 60- Ce 60- N/A 1" Dia. N/A 45- Ce 45- N/A 1" Dia. N/A Particle Board SCL (Timber strand) Stave 1" Dia. N/A STC 39 N/A 1" Dia. N/A STC 45 VT Do Types Maimum Size Single 5-Ply HPDL Do Do w/ Wood Only Transom Same as Same as Maimum Size Standard Pair W/ W/out Maimum Size DE Pair W/ W/out Ma. Transom Maimum Lite (1/4" wire glass)* Maimum Louver (fusible link) Size W L Sq. W L Sq. Hing es & Pivot s 10" 33" " 24" 576 Per 10" 33" " 24" 576 Per 30" 54" " 24" 576 Per N/A N/A N/A N/A N/A N/A Non-rated STC dos N/A N/A N/A Per N/A N/A N/A N/A N/A N/A available with 6"36" (216 sq. in.) ma. lite kit. STC dos must use std. 110 vision panel. STC rating void. N/A N/A N/A Per Locks Fire Eit Devices Closers Viewer 2 per do ma. Flush Bolts 24" ma. 24" ma. Auto Do Bottoms 24" ma. N/A 24" ma. 24" ma. 24" ma. N/A 1" Dia. N/A Kick Plates
4 Lead Lined N/A N/A N/A N/A N/A 16" 16" 256 N/A N/A N/A Per & Vert. Rod 12" ma. *Larger lite sizes available with special glass & stops (all furnished by others). MISCELLANEOUS NOTES: FIRE RATED TRANSOMS 1. Frame transom bar astragal required if the meeting rails are square. 2. No transom bar astragal required if meeting rails have 1/2" rabbet with G.P. FireStop material (2" meeting minute and 45- through 90-minute). 3. Springbolts f transoms & side panels shall be placed 3" (76 mm) from each cner with the minimum number centered on each side as follows: Panels up to 18" (457 mm) in height - 2 spring bolts per side Panels up to 36" (914 mm) in height - 3 spring bolts per side Panels up to (1219 mm) in height - 4 spring bolts per side Side Panels over (1219 mm) in height 18 (457 mm) on center MACHINING OF DUTCH DOORS All preparations and requirements of the current edition of shall be followed. Hinges: Per, Cylindrical Locksets: One (maimum 2-1/8"/54 mm be) per leaf to provide latching between top and bottom leaves, and between either top bottom leaf into frame. (Neutral Pressure) Maimum Opening Sizes F Fire Rated Pairs With Edges Hardware Prep Standard Pair (Single Egress) Double Egress Pair Point Latching Vertical Rod Eit Device Rim Rim N/A N/A N/A N/A N/A LBR N/A N/A N/A Concealed Vertical Rod Concealed LBR N/A N/A N/A N/A N/A N/A N/A N/A Dimensions given are maimum opening sizes. Specific hardware requirements may affect opening size. Specific hardware may affect the amount of blocking needed. Specific hardware may require the use of intumescent. LBR devices require the use of thermal pins (do to flo/sill). All metal astragals and edge sets may be veneer wrapped. Please specify.
5 (Neutral Pressure) Maimum Opening Sizes F Fire Rated Pairs Without Edges Hardware Prep Standard Pair (Single Egress) Double Egress Pair Point Latching N/A N/A N/A Vertical Rod Eit Device Rim Rim N/A N/A N/A N/A N/A LBR * * N/A N/A N/A Thermal Pin: do to do Thermal Pin: do to do Concealed N/A N/A N/A N/A N/A N/A N/A N/A Vertical Rod Concealed LBR Dimensions given are maimum opening sizes. Specific hardware requirements may affect opening size. Specific hardware requirements may affect the amount of blocking needed. Specific hardware requirements may require the use of intumescent. LBR devices require the use of thermal pins applied do to flo/sill (unless noted otherwise). Rev 9/07
FIRE DOOR CAPABILITY CHART - 20-MINUTE POSITIVE PRESSURE
FIRE DOOR CAPABILITY CHART - 20-MINUTE POSITIVE PRESSURE Fire Rating 5-Ply Wood HPDL Do Only Do w/ Transom 1 5509 909 5P09 9P09 over up to 5502 303 404 over up to 5P09 9P09 5P09 9P09 3-0 5508 5P08 8 8P08
HARDWARE. Push / Pulls... A Pivots... A Hinges, Locks and Cylinders... A Handles, Locks and Accessories... A4...
front line Table of Contents A4 1 HARDWARE Section Page Push / Pulls... A4... 2 Pivots... A4... 3 Hinges, Locks and Cylinders... A4... 4 Handles, Locks and Accessies... A4... 5 Exit Devices... A4... 6
K13.12 FACE FIXED PANIC EXIT DEVICE K13 DOORS
K13 DOORS K13.12 FACE FIXED PANIC EXIT DEVICE 01.03.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Base set n
P STYLE 6 LH 5 RH 4 LRH
42" [1067] HARDWARE FOR 3/8"- 1.9 1.8 1.5 1.2 STANDARD WEDGE LOCK DOOR (HEIGHT) GUIDELINES 3/8" (10mm) TEMPERED = 84" RECOMENDED MAX HEIGHT 1/2" (12mm) TEMPERED = 108" RECOMENDED MAX HEIGHT OPP. 1.9 3
CRL COMMERCIAL PATCH HARDWARE WEDGE LOCK STYLE FOR 5/8"-3/4" GLASS TYPICAL HURCULITE WEDGE-LOCK GLASS DOOR ELEVATIONS P STYLE
42" [1067] HARDWARE FOR 5/8"- 1.5 1.9 1.8 1.2 OPP. 1.9 3 1/2" [88] 24 7/8" [632] DLO 1 11/16" [42] 84" [2134] 114" [2896] STANDARD WEDGE LOCK DOOR (HEIGHT) GUIDELINES 5/8" (15mm) TEMPERED = 84" RECOMENDED
DEADLATCHES LK-2100 SERIES ASSEMBLY DETAILS LK R-RH
LK-2100-40-R-RH 7:07 2 x csk. holes to suit M5 LK-2100-40-R-RH Right hand door FX079XSLF x 4 1 LK-2100-70 LK-2100-70 AC021 LK-2100-40-R-RH 2 3 4 Complete assembly should consist of:- LK-2100-40-R-RH Lock
W a l k Gat e. photo: ww West Fifth Avenue Columbus, Ohio Phone: Fax:
W a l k Gat e photo: ww-07 SERVICE AWARD AWARD SUPER LIST ANGIE S COLUMBUS 1999, 2002, 2003, 2003, 2006 2006 944 West Fifth Avenue Columbus, Ohio 43212 Phone: 614.291.4342 Fax: 614.291.6660 http://www.fortinironworks.com
Salice 4100 Tower Bolt
Salice 4100 Tower Bolt 4100 Rod - 600, 900mm 4100A - (400mm X 49mm) 4100B - (350mm X 49mm) 4100C - (300mm X 49mm) 4100D - (250mm X 49mm) - Brass - POV, AO/POV Tower Bolts Salice 4199 Tower Bolt 4199/D
P STYLE 6 LH 5 RH 4 LRH
8 42" 1.11 1.8 1.5 1.2 OPP. 1.11 3 SIDELITE OPENING 3 SIDELITE OPENING TYPICAL HURCULITE WEDGE-LOCK DOOR ELEVATIONS 1.7 1.9 1.1 1.2 14 1.9 1.7 OPP. 8 3 24 7/8" DLO 1 11/1 8 11 1.7 1.7 OPP. 1.9 1.3 1.4
Per foot Prices. Chain Link. Iron Fence BUDGET FENCE COMPANY. us: (702) Gates (702) ' tall 8' tall. Automatic Gate Openers
BUDGET FENCE COMPANY Email us: Per foot Prices Chain Link from $6.00 per lin. ft. from $9.00 per lin. ft. ( includes wire, top rail, line posts, ties & loop caps) Materials Only Iron Fence from $20.00
BUILDERS HARDWARE SECTION 6 INDEX
BUILDERS HARDWARE SECTION 6 INDEX hhmillworks.com 1937 Troup Valley Road Mt. Pleasant Mills, PA 17853 570-539-2611 800-326-9873 Fax 570-539-2379 800-718-4463 Product Page Effective Date Revised Date Lockset
GP100 SERIES ENDURANCE PLAYGROUND SYSTEMS. Installation and Assembly Instructions. Gared Holdings, LLC 9200 E. 146th St. Noblesville, IN 46060
GP100 SERIES 1 OF 16 401754712 B Table of Contents Section Page No. Introduction 2 Cautions and Warnings 3 Parts Checklist 4 Post & Extension Arm Installation 7 Acrylic, Glass, and Perforated Steel Backboard
GEN20AD-GEN20AL-GEN18AN
AD-- Parts List 02-August-16 This parts list is current as of the above revision date. See http://www.rheempartslists.net/92-42800-ad--.pdf for the current revision. Standby Generators Table of Contents
P STYLE 6 LH 5 RH 4 LRH
8 4 1.5 TYPICAL HURCULITE WEDGE-LOCK DOOR ELEVATIONS STANDARD WEDGE LOCK DOOR (HEIGHT) GUIDELINES 3/8" (10mm) TEMPERED = 8 RECOMENDED MAX HEIGHT 1/ (12mm) TEMPERED = 108" RECOMENDED MAX HEIGHT (15mm) TEMPERED
hhmillworks.com 1937 Troup Valley Road Mt. Pleaseant Mills, PA Fax
BUILDERS HARDWARE SECTION 6 INDEX hhmillworks.com 1937 Troup Valley Road Mt. Pleaseant Mills, PA 17853 570-539-2611 800-326-9873 Fax 570-539-2379 800-718-4463 Product Page Effective Date Revised Date Lockset
500 SERIES. Standard-Duty Grade 3 Surface Applied Closers. Standard Features. 3 hours fire rated. door openings. closing speeds
500 SERIES Standard-Duty Grade 3 Surface Applied Closers Standard Features n Performance Complies with ANSI A156.4, Grade 3, 500,000 cycles, UL/ULC listed up to 3 hours fire rated n Chassis/Closer Cast
Advantage Lockers & Bike
Advantage Lockers & Bike Advantage Bike Racks & Lockers Inc. is the #1 supplier of Storage Lockers and Bike Racks to the Lower Mainland s residential construction industry. With 25+ years of experience
tubular EntrancE sets 6
tubular entrance sets Item Qty Part No. Part Name 1 1 6420.xxx.00052 Cylinder Collar 2 1 6420.xxx.00012 Large Plate 3 1 6420.xxx.00022 Small Plate 4 1 2598.xxx.00013 Door Pull 5 1 5300.xxx.95115 Thumbpiece
Beauty-Line Windows (1957 to 1979)
Beauty-Line Windows (1957 to 1979) Parts Catalog Main Menu Section TOC Search What s in This Section Standard Windows................................................ Page 3 Parts Illustration...........................................................
Stainless Steel Straps
Stainless Steel s Stainless Steel s Nuts Nuts for use with alloy steel s New S SH Nut Code Old S SH escription AN365 self-locking, cadmium-plated steel with non-metallic insert AN363 self-locking high-temperature,
D100/D200. Deadbolt service manual
D100/D200 Deadbolt service manual Contents 5 Introduction 5 Guide to Index Symbols for Lock Assembly Drawings 7 Lock Assembly Drawing Index 9 Lock assemblies 10 D111G (SFIC), D111P: Classroom Function
DEADBOLT SETS, MECHANICAL FEATURES
, MECHANICAL FEATURES 8000 SERIES LOW PROFILE CYLINDER DEADBOLT FOR 1 5 8 (41mm) DOOR PREP All deadbolts feature a ½ low-profile cylinder projection. CASE: Deadbolt case is formed of heavy gauge steel
/8 Pine Doors. WP66R ND730 P1510 P1515 P1501 Widths less than 2 0 are 2 or 3 panel. ND730P Plantation Primed
2-5000-15 1-3/8 Pine Doors Section D Page 1 IDP/IDPR WP66R ND730 P1510 P1515 P1501 Widths less than 2 0 are 2 or 3 panel Single Hip WP66R P1510/1515 ND730 ND730P Plantation P1505/1510/ 1515 P1501CL Clear
A A A T E C H N O L O G Y
A A A T E C H N O L O G Y & SPECIALTIES CO., INC. C O N S T A N T E F F O R T S U P P O R T S TOTAL SOLUTION SERVICE For the Industrial Piping Marketplace 2012 www.aaatech.com 4 1 Y E A R S S E R V I N
Pull Handles & Push Plates General hardware
Pull Handles & Push Plates General hardware The Legge range of push and pull plates are ideally suited to heavy duty applications such as hospitals, schools and high usage public facilities. The products
Fiber Cable Puller with Tuf-Lugger lite
7 OPERATING INSTRUCTION MANUAL Fiber Cable Puller with Tuf-Lugger lite Copyright 2015 DCD Design & Manufacturing Ltd. Revision 1.0 IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING The Fiber
S110 Steel Level Panel Installation Instructions
S110 Steel Level Panel Installation Instructions NOTE: Fairway Architectural Railing Solutions will not be held liable for incorrect or unsafe installations by installer. It is the installer s resposibility
SHUR-STEP STAIRWAY and Platform
SHUR-STEP STAIRWAY and Platfm (Patented) Installation Instructions Stiffened and Unstiffened Narrow Wide Crugated Flat-Bottom Grain Bins and Commercial Hopper Bins (above the Hopper) February 203 MLD7D
Aluminium & Stainless Steel
International Door Controls Ltd Commercial Door Handle Series Aluminium & Stainless Steel www.int-door-controls.com 1 With over forty years of experience and knowledge behind the name, International Door
3M InCa Individual Cross-Connection Cabinets
3M InCa Individual Cross-Connection Cabinets InCa 7/14 InCa 7/12 InCa 7/10 InCa 7/8 InCa 8/14 InCa 8/12 InCa 8/10 InCa 8/8 InCa 10/14 InCa 10/12 InCa 10/10 InCa 10/8 Series 7 Series 8 Series 10 87 The
Invacare Top End Parts Catalog
Invacare Top End Parts Catalog T Titanium Top End Frames / Standard Parts Pre- July 2009 20 22 0 2 Pre- July 2009 9 2 2 Pre- July 2009 9 2 Titanium Head Tube Assembly see Casters / Forks on pg. 4 4 4 see
2014 GUNSMITHING PRICE LIST
2014 GUNSMITHING PRICE LIST PROHASKA S PRECISION SHOOTING 606 E BREWSTERST APPLETON WI 53911 920-257-7142 WWW.PROHASKAS.COM PROHASKA S PRECISION SHOOTING CAN ACCOMMODATE OTHER GUNSMITHING JOBS NOT LISTED
T Y P E V S A B M S E W A G E P U M P
Pe r fo r m a n ce C h a r t s 11 1 D R Y P I T S B U L L E T I N 2 3 9 8 7 6 5 4 3 2 1 12 11 1 / 4 1 1 / 2 9 3 / 4 9 5% 3 HP 5 HP 7 1/2 HP 1 HP 76% 5% C u r v e P a g e V S A B M - 4 1 1 5 R P M M O D
Interconnected Lock ANSI Grade 2 Medium Duty GF2 Series
Interconnected Lock ANSI Grade 2 Medium Duty GF2 Series Features The GF2 Series interconnected locks bring together the functionality of the cylindrical locks with the security of the auxiliary deadbolt
Kestrel Aluminium Systems Limited. Product Manual Section 10 Thermal Framing System. Manual Version
Kestrel luminium Systems Limited Product Manual Section 10 Manual Version 23.0.1 Kestrel luminium Systems Section 10.01 Product Specification 10.01.01 sheet 1 Product specification 10.01.01 sheet 2 Product
CONCEALED DOOR CLOSERS
CONCEALED DOOR CLOSERS Model chart Without hold-open Model No. Applicable door size Applicable door thickness (mm) With hold-open With backcheck Width (mm) Weight (kg) Steel door Wooden door age COU-52
LIGATURE RESISTANT CRESCENT HANDLE CYLINDRICAL SETS THE GOLD STANDARD FOR LIGATURE RESISTANCE + ADA COMPLIANCE
LIGATURE RESISTANT CRESCENT HANDLE CYLINDRICAL SETS THE GOLD STANDARD FOR LIGATURE RESISTANCE + ADA COMPLIANCE SUPERIOR, FUNCTIONAL, AMERICAN MADE THE GOLD STANDARD FOR LOW, MEDIUM AND HIGH RISK ENVIRONMENTS
GV Standard X-Vent. Setup, Commissioning & Installation Guide
GV Standard X-Vent Setup, Commissioning & Installation Guide Technical experts in the design, manufacture and supply of precision engineered, architectural rooflights for residential and commercial buildings.
Assembly Instructions for the Rolling Harrow and Reel Turbo-Till 6/26/03
Assembly Instructions for the Rolling Harrow and Reel Turbo-Till 6/26/03 Your initial action is to locate the correct drag frame [(61) 589-107H through 589-116H]. Bolt the drag frame to the rear drag plates
Perma-Shield Gliding Windows (1971 to 1992)
Perma-Shield Gliding Windows (1971 to 1992) Parts Catalog Main Menu Section TOC Search What s in This Section Standard Units.................................................... Page 3 Parts Illustration...........................................................
THOR 10 HAMMER CAGE INSTRUCTIONS
75 " 7m 78 4" m 6" 8.8m 45 ".70m 4.9deg 6 4" 6m 44 4".67m 75 " 7m 9 4" 0m 44".m 497 4".64m The 70, Thor Hammer Cage, consists of four heavy duty aluminum net poles. The unique pole structure reduces the
Opening and closing force guidelines
Opening and closing force guidelines This document has been complied under guidance of ASDMA membership to provide information on the requirements of Part M of the Building regulations with regards to
Tower Accessories & Hardware
Safety-Climb Cable System for Climbing Ladder These Safety-Climb Cable products clamp to climbing ladder rungs up to 1-1/4" (32 mm) in diameter. The products meet or exceed OSH requirements for climbing
C.R. LAURENCE GLASS WALL OFFICE SYSTEMS D E M O U N T A B L E P A R T I T I O N S
CAT. NO. GW0S16 C.R. LAURENCE GLASS WALL OFFICE SYSTEMS D E M O U N T A B L E P A R T I T I O N S F R A M E L E S S F R A M E D M O V A B L E W A L L S C.R. LAURENCE GLASS WALL OFFICE SYSTEMS D E M O U
HLS TM 7 Series* Multipoint Hardware System. Edition 2
HLS TM 7 Series* Multipoint Hardware System Edition 2 1 HLSTM 7 Series* Multipoint Hardware System... the next generation of Multipoint Locking Systems from HOPPE North America, Inc. Stainless Steel and
Sliding Arm. EN1154 (Inc.EN1634part.1) 500,000cycles RYOBI. Overhead door closer D-1200 SERIES
Sliding Arm EN14 (Inc.EN164part.1) 500,000cycles Overhead closer RYOBI Overhead closer Model chart Size Without hold-open Without backcheck With backcheck width Size Standard application D-1200 D-1200
door fittings >> Make any door look special with Croft fittings. Lever Furniture
17 door fittings >> Make any door look special with Croft fittings. 1 Lever Furniture Traditional, contemporary, or inspired from our heritage, Croft levers represent the highest quality British products.
Bike Rack and Tire Carrier
Bike Rack and Tire Carrier OWNER'S MANUAL Rev: 10.26.2017 Page 1 Bike Rack and Tire Carrier Owners Manual TABLE OF CONTENTS System 2 Description 2 Prior To Operation 3 Manual Slide-Out Bike Rack Operation
Bike Rack and Spare Tire Carrier 1-1/4" Receiver
Bike Rack and Spare Tire Carrier 1-1/4" Receiver OWNER'S MANUAL Rev: 11.15.2017 Page 1 Bike Tire Carrier 1.25 Owners Manual TABLE OF CONTENTS Safety Information 2 Product Information 2 Installation 3 Installation
STRAW CHOPPER & COMPONENT PARTS CATALOG
STRAW CHOPPER & COMPONENT PARTS CATALOG 2 S SERIES WIDE SPREAD DEFLECTOR ASSEMBLY CONTINUED TOP QUALITY PRODUCTS AND CUSTOMER SERVICE FROM THE TSR STAFF & FACTORY THANK YOU FOR YOUR BUSINESS 3 INDEX PAGE
Service Parts Manual Drawer Microwave Models: MWD24-2 & MWD30-2
Service Parts Manual 28 14 40 49 68 29 73 5 11 55 38 75 56 4 44 8 7 45 1 52 2 22 10 46 50 71 25 26 62 15 27 3 24 48 9 39 57 13 63 39 74 36 64 51 53 50 6 35 66 42 70 21 18 37 55 16 17 76 60 33 67 19 54
Perma-Shield Gliding Windows
Perma-Shield Gliding Windows Parts Catalog Main Menu Section TOC Search What s in This Section Standard Units.................................................... Page 3 Parts Illustration...........................................................
ASSEMBLY INSTRUCTIONS
XR 9-2009:new odc 1018 revised 2/17/10 9:11 AM Page 1 ODC XR 9 OUTDOOR DISCOVERY CRAFT ASSEMBLY INSTRUCTIONS Your ODC XR 9 Pontoon Boat comes in two separate cartons consisting of the following parts:
Fencing your spa or swimming pool
Fencing your spa or swimming pool A guide to understanding your responsibilities as a pool owner. Contents Introduction to fencing your spa or swimming pool...2 Definitions...3 I m building a new pool
CERTIFICATE OF APPROVAL No CF 111 ALLEGION (UK) LIMITED
CERTIFICATE OF APPROVAL No CF 111 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of Bescot Crescent, Walsall,
INSTALLATION NOTES HURRICANEFABRIC.COM
INSTALLATION NOTES HURRICANEFABRIC.COM NOTES INSTALLATION NOTES 1The required number of Anchors and Clips for your order are calculated using nominal parameters for your application and geographic location.
Parts Manual STRIKER Striker 2840 Parts List - PN Printed in USA 03/18/08
Parts Manual STRIKER 2840 Striker 2840 Parts List - PN 238155 - Printed in USA 03/18/08 Standard Parts Recommended General Wear Parts Ref No Part Description Qty Part No 1 Squeegee Hose Assembly
Window Replacement Hardware
Casement and Awning Tracks Hand 750-1361414 Shown 750-1361415 Opposite 38-53 Steel 38-53CG CoastGard 38-55 Steel 38-55SS Stainless Steel 38-59 Steel 38-65 Steel 38-54 Aluminum Dorchester 38-51ST Dorchester
HES 1006 Electric Strike
HES 1006 Electric Strike The 1006 Series is also available in a Complete One Box Solution 3 Works with all cylindrical and mortise locksets with or without a deadbolt The strongest, most versatile electric
t/o/s application guide
E L E M E N T B A S I C S..................................8 2 E L E M E N T / PA N E L C O M PAT I B I L I T Y C H A RT.................8 4 E L E M E N T F I N I S H E S.................................8
CHAIN LINK FENCE GATE
WALCOOM Walcoom Corporation CHAIN LINK FENCE GATE Chain link fence gate is a versatile product in many aspects, here, Walcoom provides buyers with sufficient strength and durability chain link fence gate
Fencing your spa or swimming pool
Fencing your spa or swimming pool A guide to understanding your responsibilities as a pool owner. Contents Introduction to fencing your spa or swimming pool...2 Definitions...3 I m building a new pool
HES 1006 Electric Strike
3 HES 1006 Electric Strike Works with all cylindrical and mortise locksets with or without a deadbolt Also available in a Complete One Box Solution The strongest, most versatile electric strike available.
FEE SCHEDULE POOL PERMIT FEES. Refundable Security (Cash of L.C.) 1 Hot Tub, Spa, etc. $ nil 2 Above Ground Pool $ nil
FEE SCHEDULE POOL PERMIT FEES Type of Pool Total Fee Refundable Security (Cash of L.C.) 1 Hot Tub, Spa, etc. $100.00 nil 2 Above Ground Pool $200.00 nil 3 Inground Pools (assumed $350.00 $1500.00 subdivision)
hockey hockey Integral Weighted Goals Aluminium Goals Fence Folding Goals Premier Hockey Goals Folding Wheelaway Goals
hockey www.harrod.uk.com 67 Integral Weighted Goals Aluminium Goals Fence Folding Goals Premier Folding Wheelaway Goals Freestanding Goals Socketed Goals Backboards Nets Indoor Posts hockey setting the
Grade 2 Interconnected Locksets DORMA J200
Grade 2 Interconnected Locksets DORMA J200 Table of Contents Features DORMA s J200 Series Grade 2 interconnected locksets provide exceptional security, enhanced aesthetics, and rugged dependability. These
Rev J Terminator Parts Book Page 1 of 15 Top End
1181387 Rev J.2016.03.22 Terminator Parts Book Page 1 of 15 Top End 1181387 Rev J.2016.03.22 Terminator Parts Book Page 2 of 15 Top End (800) 532-8677 (727) 522-8677 fax: (727) 522-1007 Terminator: Frame
For optimum sealing apply strips of NOR 710 seal over hinge blades with 710 seal blades to align with 720 seal blades. NOR 710 NOR 720 NOR 855
Rw.29dB ~ Rw.34dB Strebord 54mm - Double Leaf - Single Swing - Flush Door - Storey Height - with Flush Overpanel. Acoustic Assessments Fig. 10a.24 10a.25 12x12mm offset rebate with seal OVERPANEL SEALING:
Dual Electronic Basketball System Owners Manual
Dual Electronic Basketball System Owners Manual Customer Service Center N53 W24700 South Corporate Circle Sussex, WI 53089 U.S.A. WARNING! READ AND UNDERSTAND OPERATOR'S MANUAL BEFORE USING THIS UNIT.
Sprocket Selection Guidelines
Sprocket Selection Guidelines Table 1 Information Necessary to Order Sprockets 1. Chain Size Number, type, or drawing number of the chain to be used on the sprocket. (The suitability of a sprocket depends
INSTALLATION INSTRUCTIONS PUSH BAR PULLMAN PANIC BOLT DEVICE TO EN 1125 : 2008
INSTALLATION INSTRUCTIONS PUSH BAR PULLMAN PANIC BOLT DEVICE TO EN 1125 : 2008 0376/448/00 ISSUE 01 EMERGENCY PUSH PAD PULLMAN BOLT DEVICE TO EN 179 : 2008 1000mm MAXIMUM CLEAR OPENING HEIGHT WITH PUSH
PRODUCT PRICE BOOK. January 2018 Revision. Page 1
PRODUCT PRICE BOOK January 2018 Revision Page 1 Table of Contents Examples of Standard Fence and Gate Components PG.4 Stronghold Iron.... PG.4 Infinity Aluminum.... PG.4 Driveway and Walk Gates...PG.5
MODEL TRIPEX PULLEY SYSTEM
MODEL 922184 TRIPEX PULLEY SYSTEM 1 PARTS LIST FOR TRIPEX PULLEY SYSTEM Note: Check with your architect or a professional contractor for hardware required to attach the unit to the wall and floor in your
Invacare Top End Parts Catalog
40 6rd Circle North (800) 2-8677 (727) 22-8677 Fax: (727)22-007 Invacare Top End Parts Catalog Rev. A Jan, 200 Top End 40 6rd Circle North (800) 2-8677 (727) 22-8677 Fax: (727)22-007 Frame / Parts 27 28
Table of Contents Auxiliary Locks
Copyright 2003, 2004, 2007-2013, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents SSL1 Spring Latch For Security SideLight Applications...1 8200 Series
Adobe Canyon III. Oval Pool. Parts List the original portable pool
the original portable pool Adobe Canyon III Oval Pool Parts List 573-2948 Adobe Canyon III Oval Pool Parts List 20' x 12' x 48" 24' x 12' x 48" 28' x 12' x 48" 24' x 16' x 48" 28' x 16' x 48" ITEM # DESCRIPTION
Hoisting Equipment Cable puller & Accessories
Yale hoists and trolleys are not ed for Cable puller model Yaletrac Pulling force 800-3200 It has a light weight, compact, high tensile aluminium alloy housing with a large flat bottom surface for increased
Flagpole Selection Guide
Selection Guide Selecting the right pole for your project To chose the right pole you should consider both flagpole Style and Height. The common styles are outlined on this page for easy comparison. The
Assembly Guide ST200 FUNCTIONAL TRAINER
Assembly Guide ST200 FUNCTIONAL TRAINER Assembly Guide ST200 FUNCTIONAL TRAINER To avoid possible damage to this Functional Trainer, please follow these assembly steps in the correct order. Before proceeding,
FEATURES. Welded Sash and Main Frame. Swiggle or DuraSeal Spacer System on Fixed Units. 3-1/4" Frame Depth. True Sloped Sill. Integral J Channel
FEATURES Welded Sash and Main Frame 7/8" Intercept Insulated Glass with Optional Grids; Low-E, Tempered, Obscure, and Argon Gas Available Swiggle or DuraSeal Spacer System on Fixed Units Integral Nailing
ORNAMENTAL CANTILEVER GATE INSTRUCTIONS
U.S.A. Patent Number 5,36,83 ORNAMENTAL CANTILEVER GATE INSTRUCTIONS *NOTICE: Ornamental Cantilever Gates are supplied with rolls of 2 mesh safety screening in sufficient quantities to cover the entire
This parts list is current as of the above revision date. See for the current revision.
Parts List This parts list is current as of the above revision date. See http://www.rheempartslists.net/92-42800-.pdf for the current revision. Condensing Units Table of Contents Model Explanation...................................................................................................................
Reproduction. Not for. Parts Manual. VCS404 16" Walk Behind Mower. Models
Parts Manual Models Mfg. No. Description VCS404-BA Vantage 16" Walk Behind Mower VCS404-BB Vantage 16" Walk Behind Mower VCS404-BC Vantage 16" Walk Behind Mower VCS404 16" Walk Behind Mower Manual Part
DELUXE LOW PROFILE 18 & 30 STARTING PLATFORMS
DELUXE LOW PROFILE 18 & 30 STARTING PLATFORMS INSTALLATION INSTRUCTIONS CORPORATE HEADQUARTERS WESTERN SALES AND MANUFACTURING PLANT P.O. Box 400 1017 SW Berg Parkway Canby, Oregon 97013 (503) 266-2231
Slide and Turn System SF35
Profile system Framed slide and turn system Non-thermally insulated aluminum profiles with insulated glass Option of flush or weathered bottom track The flush bottom track is particularly suitable for
22-17 Partner. Owner s Manual. 624 Old Pacific Hwy SE Olympia, WA Tel (800) Fax (360) Available Rifle Kit
Available Rifle Kit Complete Upper Receiver Kit 624 Old Pacific Hwy SE Olympia, WA 98513 Tel (800) 228-3471 Fax (360) 491-3447 Owner s Manual 22-17 Partner Warnings & Operation Do not attempt to fire the
ADA COMPLIANCE CHECKLIST (RESTAURANT) Meet Fail N/A. Parking Lot
ADA COMPLIANCE CHECKLIST (RESTAURANT) Parking Lot Tow away warning at entrance to lot Accessible spaces - minimum 1, and at least 1 for each 25 spaces (e.g., 26 spaces requires 2 accessible spaces) Accessible
Tapped Hole (.375) Tapped hole 15 (.594) (.391±.004) Frame 19±0.2 (.750±.008) 12.7±0.2 (.500±.008) 19±0.2 (.750±.008) R S 4 x Ø 5.4 (.
434 Lift-off In-line Zinc can also be 31.5 19.1 (.750) For Lift-Off For on Lift-Off 1300 (300 lbf) 2200 (500 lbf) 56 T.P.I. (2.21) 31.5 19.1 (.750) Tapped hole Ø 9.5 (.375) ultimate 3300 (750 lbf) 9300
Wausau Innovative Designs
Wausau Innovative Designs To Our Friends, When my father established this company in 1953, the thing he held most dear was excellence - in quality, workmanship, innovation, and especially, customer service.
Contents. Miscellaneous Standards. Architectural Systems. Extrusions Australia Pty Ltd Ph: Andretti Court Fx:
Contents Geometric Shapes Miscellaneous Standards Architectural Systems G1 - G15 M1 - M8 A1 - A11 Edition 16 - September 2018 Geometric Shapes G1 C A Angle B Part # A (mm) B (mm) C (mm) Mass (kg/m) Int.
Fluid Dispensing Systems H O S E R E E L S H O S E S HOSE REELS
Fluid Dispensing Systems H O S E R E E L S H O S E S HOSE REELS HOSE REELS SIGNATURE SERIES H O S E S R E E L S FEATURES & BENEFITS Eight position locking precision die cast latch mechanism, with secure
CERTIFICATE OF APPROVAL No CF 877 ZOO HARDWARE LTD
CERTIFICATE OF APPROVAL No CF 877 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of ZOO HARDWARE LTD Unit
CONVERTIBLE PET YARD READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE OF PRODUCT. KEEP INSTRUCTIONS FOR FUTURE USE.
OWNER S MANUAL MODEL: 2200 CONVERTIBLE PET YARD! READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE OF PRODUCT. KEEP INSTRUCTIONS FOR FUTURE USE. www.carlsonpetproducts.com Carlson Pet Products, Inc. 3200 Corporate
REPAIR PARTS MANUAL MODEL NO. EDITION 1 MFG. ID. NO Rotary Lawn Mower
REPAIR PARTS MANUAL MODEL NO. EDITION 1 MFG. ID. NO. 96141011700 Rotary Lawn Mower 532 40 27-08 Rev. 1 01.06.06 BY Printed in U.S.A. ROTARY LAWN MOWER - - MODEL NO. EDITION 1 (96141011700) - PRODUCT NO.
COBALT BULLETPROOF PRODUCTS. Architect: J.-L. Bonnet Photography: Serge D ly
COBALT BULLETPROOF PRODUCTS Architect: J.-L. Bonnet Photography: Serge Demailly COBALT / THE SECURITY SOLUTION Cobalt high-security products cater to buildings with high risk potential such as detention
ALUMINUM FENCING SOLUTIONS
ALUMINUM FENCING SOLUTIONS Your Favorite Room Isn t a Room, It s a Yard. You ve worked hard to make your house a home - functional, comfortable, a natural expression of your personality. With ActiveYards,
Halsey Taylor Owners Manual
Halsey Taylor Owners Manual Non-Refrigerated Fountains OVL-EBP OVL-SBP OVL-SEBP OVL-ESBP Installer To assure you install this model easily and correctly, PLEASE READ THESE SIMPLE ITRUCTIO BEFORE STARTING
MODEL CHEST PULLEY SYSTEM
MODEL 9180 CHEST PULLEY SYSTEM 1 PARTS LIST FOR CHEST PULLEY Note: Check with your architect or a professional contractor for hardware required to attach the unit to the wall and floor in your facility.
- Written price quotations are valid for 30 days from the date of the quote unless otherwise noted.
SPECIFICATIONS - All material is solid brass with a #8 mirror finish unless otherwise noted. - All material sold by length is priced in one foot increments. ORDERING PROCEDURE - Use a Purchase Order number.
1ml] ARROWQUIP Q-CATCH 86 SERIES MANUAL SQUEEZE CHUTE PRODUCT MANUAL arrowquip.com
![1ml] ARROWQUIP Q-CATCH 86 SERIES MANUAL SQUEEZE CHUTE PRODUCT MANUAL arrowquip.com](/thumbs/72/66693620.jpg "1ml] ARROWQUIP Q-CATCH 86 SERIES MANUAL SQUEEZE CHUTE PRODUCT MANUAL arrowquip.com")
1ml] ARROWQUIP Q-CATCH 86 SERIES MANUAL SQUEEZE CHUTE PRODUCT MANUAL 1-866-383-7827 operations@arrowquip.com arrowquip.com CONTENTS 1. General Description of the Q-Catch 86 Series Manual Squeeze Chute