F66111 MICROFILM. Feedback lever (2) in horizontal position at mid travel of stroke. Valve controller L ±2. Actuator. Adjust if necessary
|
|
- Rudolph Booker
- 6 years ago
- Views:
Transcription
1 :.5 eedback lever () in horizontal position at mid travel of stroke 4 44 L ± 43 Valve controller ctuator djust if necessary 75 Stroke 6- mm eedback lever hole Stroke (mm) L (mm) STION n*m NO. WN. T PPR. Metso utomation Inc. MOUNTING ST LINR TUTORS - N IKOS KUKKOJO PVI T WN HK. PPR. OL NO. 66 MIROILM.
2 RSTRIT 6 Metso Page ( ) ngineering -om MOUNTING ST M-Z-NRVIK -9-N93 (9) Id-code: H363 Ver: Ref.number: pproved y: pproved ate: Status: Junnola Pekka, Helsinki JUL 5 5 NOV 6 pproved - Ready and approved by engineering Level Partno Id-code Ver Pcs Qty Unit escription escription Material wg.no wg.rev H369 H6 H65 M5 H496 H7 H53 H H H36 H H6 959 H36 H436 H m RKT K LVR ILLING PI SOKT H SRW WSHR SOKT H SRW THR R THR R SPRING WSHR HXGON NUT LMP HXGON SRW WSHR HXGON SRW IXING PLT RO N HXGON NUT LOK NUT SPR SOKT H PLUG LMP SOKT H SRW LMP : I N93 I N9, STROK 6- MM (9-5) 6.5, N9 OR SPIL US M3X35 IN9 M3 IN5 M6X IN9 M5x4 M5 M IN7 M IN934 MX35x45 M5X 6.4/.5X.6 M6X NRVIK - N9 M5 ML, IN ISO 4-4 (IN 64-K) M5 IN934 M5 NYLOK IN95 5.3/X3 /4 NPT NRVIK -9 M6X35 IN9 N9-MSONILN 7/ SZ.3 ISI 36 ISI 36 ISI 36 ISO ISO / ISO / ISI 36 ISI 36 ISI 36 ISO / ISI 36 ISO ISI 36 ISO ISI 36 ISI 36 IN 67 PRT 4-7 ISO ISI 36 ISI 36 ISI 36 ISO / ISI THIS OUMNT N LL INORMTION ONTIN HRIN R TH PROPRTY O MTSO N R NOT TO US XPT S UTHORIZ IN WRITING Y MTSO
3 RSTRIT 6 Metso Page ( ) ngineering -om MOUNTING ST M-Z-NRVIK -9-N93 (9) Id-code: H363 Ver: Ref.number: pproved y: pproved ate: Status: Junnola Pekka, Helsinki JUL 5 5 NOV 6 pproved - Ready and approved by engineering Level Partno Id-code Ver Pcs Qty Unit escription escription Material wg.no wg.rev ocuments: ttached Items: Notes: a H3699 H36 H479 H776 H MOUNTING ST MOUNTING ST WITH ISI 36 LL JOINTS, STROK 9 MM. N RKT SUPPORT PLT SOKT H SRW WSHR SOKT H SRW : I N93 5X5, 4X M MX6 IN9.4/6X.6 IN5 MX6 IN9 LINR TUTORS - N93 LINR TUTORS - N93 ISI 36 ISI 36 ISO ISI 36 ISO THIS OUMNT N LL INORMTION ONTIN HRIN R TH PROPRTY O MTSO N R NOT TO US XPT S UTHORIZ IN WRITING Y MTSO
4 W MTSO UTOMTION R TH OWNRS O THIS OUMNT WHIH MUST NOT, WITHOUT OUR PRMISSION, OPI, GIVN TO THIR PRTY OR IN NY OTHR WY US GINST OUR OPYRIGHT. 4x 6,5 4,5 R 6 9,5 3,5 43 4,5 4, x,5 x,5 4,5,5,5 4,5 R3 4x, Tasaus / Spot facing,5 33 (4),5 9,5,7 5x R Purseet poistettu ja terävät kulmat pyöristetty urr removed and sharp corners rounded Nimikekoodi (esim. HXXXXXX) merkittävä kappaleeseen Item code (e.g. HXXXXXX) must be marked on the part n*m NO. WN. T RVISION SRIPTION PPR. 4 WIGHT RKT : I6534-N93 Metso utomation Inc. KG SL UNMRK MHINING TOLRNS. TO MTSO UTOMTION S STING TOLRNS. TO S (ISO 6) T : T WN IKOS HK. KUKKOJO PPR. PVI SolidWorks OL NO. MIROILM. 6656
5 : 4,3 5, 4, 5,7 5,4 59,5 66,6 73,6,7 7, 94,9 4,3 5, 4, 5,7 R3 5, x7,5 4, R,75 7 3, 3, Kirjaimet tehdään laserimerkinnällä Letters made by laser marking TIL : TIL : urr removed and sharp corners rounded Jäysteet ja terävät särmät poistettava n*m NO. WN. T PPR. Metso utomation Inc. K LVR I N9, STROK 6- MM (9-5) WITH UNILL 6..3 IKOS OLKKOMI T WN HK. PPR. OL NO MIROILM.
6 W MTSO UTOMTION R TH OWNRS O THIS OUMNT WHIH MUST NOT, WITHOUT OUR PRMISSION, OPI, GIVN TO THIR PRTY OR IN NY OTHR WY US GINST OUR OPYRIGHT. 4 -, 3,5 6,5 Ra 3, hamfer Viiste 6,6 STION - +, -, TIL 4 :,5 3, x4 through/läpi 6,9 drilling depht poraus syvyys,6, depht/syvyys,6,45 R5, 5 +, STION - +, 6 3,5 Ra 6,3 ( Ra 3, ) UNMRK MHINING TOLRNS. TO MTSO UTOMTION S STING TOLRNS. TO S (ISO 6) T n*m NO. WN. T RVISION SRIPTION PPR. WIGHT Metso utomation Inc. KG SL ILLING PI 6.5, N9 OR SPIL US : T 6..3 WN IKOS HK. PPR. OLKKOMI SolidWorks OL NO. MIROILM. 4646
7
8 W MTSO UTOMTION R TH OWNRS O THIS OUMNT WHIH MUST NOT, WITHOUT OUR PRMISSION, OPI, GIVN TO THIR PRTY OR IN NY OTHR WY US GINST OUR OPYRIGHT , R5 (5) R ,4,4 5, Purseet poistettu ja terävät kulmat pyöristetty urr removed and sharp corners rounded UNMRK MHINING TOLRNS. TO MTSO UTOMTION S STING TOLRNS. TO S (ISO 6) T n*m NO. WN. T RVISION SRIPTION PPR. WIGHT IXING PLT NRVIK-N9 Metso utomation Inc. KG SL : T WN IKOS HK. KUKKOJO PPR. PVI SolidWorks OL NO. MIROILM. 666
9 W MTSO UTOMTION R TH OWNRS O THIS OUMNT WHIH MUST NOT, WITHOUT OUR PRMISSION, OPI, GIVN TO THIR PRTY OR IN NY OTHR WY US GINST OUR OPYRIGHT. L 5,3 arnell tilauskoodi: 7474 (R LTRONI HRWR - M59-5-SS - SPR/STNO, ROUN, SS, MM X 3MM) n*m NO. WN. T RVISION SRIPTION PPR. UNMRK MHINING TOLRNS. TO MTSO UTOMTION S STING TOLRNS. TO S (ISO 6) T SPR 5.3/XL WIGHT Metso utomation Inc. KG SL 5: T 6..3 WN IKOS HK. PPR. OLKKOMI SolidWorks OL NO. MIROILM
10 Metso utomation Oy
11 W MTSO UTOMTION R TH OWNRS O THIS OUMNT WHIH MUST NOT, WITHOUT OUR PRMISSION, OPI, GIVN TO THIR PRTY OR IN NY OTHR WY US GINST OUR OPYRIGHT. 4x M6, depth ,3, ,5,5 (5) 5 (3) (9) R,5 (5) 5 Purseet poistettu ja terävät kulmat pyöristetty urr removed and sharp corners rounded,5 Ra 6.3 n*m NO. WN. T RVISION SRIPTION PPR. UNMRK MHINING TOLRNS. TO MTSO UTOMTION S STING TOLRNS. TO S (ISO 6) T LMP NRVIK -9 WIGHT Metso utomation Inc. KG SL : T WN IKOS HK. KUKKOJO PPR. PVI SolidWorks OL NO. MIROILM. 666
12 Metso utomation Oy
13 W MTSO UTOMTION R TH OWNRS O THIS OUMNT WHIH MUST NOT, WITHOUT OUR PRMISSION, OPI, GIVN TO THIR PRTY OR IN NY OTHR WY US GINST OUR OPYRIGHT. 43 x,5 4,5 4,5 5,5,5 R3 4,5, Tasaus / Spot facing 9,5,7 5x 9,5, R 9,5 3,5 6 R 6 n*m Purseet poistettu ja terävät kulmat pyöristetty urr removed and sharp corners rounded Nimikekoodi (esim. HXXXXXX) merkittävä kappaleeseen Item code (e.g. HXXXXXX) must be marked on the part NO. WN. T RVISION SRIPTION PPR. 5 + WIGHT RKT : I N93 Metso utomation Inc. KG SL UNMRK MHINING TOLRNS. TO MTSO UTOMTION S STING TOLRNS. TO S (ISO 6) T :.5 T WN IKOS HK. KUKKOJO PPR. PVI SolidWorks OL NO. MIROILM. 665
14 W MTSO UTOMTION R TH OWNRS O THIS OUMNT WHIH MUST NOT, WITHOUT OUR PRMISSION, OPI, GIVN TO THIR PRTY OR IN NY OTHR WY US GINST OUR OPYRIGHT. 4,5 5 7,5 (35) 6 5 (43) 4x M 64 Purseet poistettu ja terävät kulmat pyöristetty urr removed and sharp corners rounded n*m NO. WN. T RVISION SRIPTION PPR. UNMRK MHINING TOLRNS. TO MTSO UTOMTION S STING TOLRNS. TO S (ISO 6) T WIGHT SUPPORT PLT 5X5, 4X M Metso utomation Inc. KG SL : T WN IKOS HK. KUKKOJO PPR. PVI SolidWorks OL NO. MIROILM. 6664
DOCUMENT STATUS: - NOTICE OF PROPRIETARY INFORMATION
RVSON STORY RV T SRPTON O Y 50 /0/00 PROUTON RLS 4 MM /9/0 RPL P/N 40- WT 40-99; RPL P/N 40-00 & 40-0 WT 40-45 N RMOV P/N 40-954 & 40-000 ROM T SSMLY 595 S //0 UPT NLR N ST SSY 5 MM 0//0 RPL 40- WT 40-9
More informationSection A-A SPECIFICATION: 1. ELECTRICAL 1.1 Current Rating: 0.2A max. 1.2 Voltage Rating: 10VAC/DC
RV. SRIPTION RWN T INITIL RLS ROS 205/07/0 SPIITION: 6 5 9 0. LTRIL. urrent Rating: 0.2 max..2 Voltage Rating: 0V/.3 ontact Resistance: 50mΩ.4 Insulation Resistance: 000MΩ.5 ielectric Withstanding Voltage:
More informationD A N D E BATTERY BOX ASSEMBLY
NOTS:. TTRY OX SSMLY ONSISTS O TWO INTIL SSMLIS 2. OTH MOUNT TO TH QUTORIL PLT ON TH +Z SI. SSM IS MOUNT ON TH +X SI 4. SSM 2 IS MOUNT ON TH -X SI 5 7 5 6 4 RVISIONS RVISION RVISION HNG T R PS2. INITIL
More informationPump Assembly. 25 Ton Jack. Air Kit. Emerson PN. Hyd Kit. Emerson PN. Air Kit ITEM NO.
2 4 ITM NO. ir Hyd SRIPTION QTY. 2-0P Pump ody 2 2-02P Piston Spring 2-0P Piston ssembly 4 2-04P Piston O-Ring 2-0P ir Piston Rod O-Ring 6 2-06P ir Motor lock 7 2-07P ir Motor lock O-Ring 8 2-08P ir Motor
More informationSUN WP INDUSTRIAL VALVES INDUSTRIAL VALVES 2-PIECE BALL VALVE FULL BORE. STANDARD PART NUMBERS Art female/female. Art.
INDUSTRI VVES SUN WP PIEE VVE FU ORE UNI EN ISO : ertificato n / MIN STNDRD FETURES ONSTRUTION: ISI ERTIFITIONS: DVGW for gas TÜV for T uft DIMETER: from DN /" to DN " PRESSURES: from R to R TEMPERTURE
More informationFlow rates to 200 l/min
LMP MULTIPORT - - Maximum pressure bar low rates to l/min Technical data ilter housing (Materials) Head: luminium Housing: ataphoresis-painted Steel ypass valve: rass - luminium Pressure Working pressure:
More information29 th WARMAN DESIGN & BUILD COMPETITION Project RAVINE. Restore Access Via Independently Navigated Equipment
9 th WRMN SIGN & UIL OMPTITION 06 Project RVIN Restore ccess Via Independently Navigated quipment ONTXT The inhabitants of Gondwana, a small planet on the outer fringes of our Galaxy, have recently experienced
More informationMODEL RD5000 MONO-BLOCK. Model RD5100. Model RD5200. Model RD5300. Directional Control Valves 1, 2, 3 Spool VALVES
MOL R5000 MONO-LOK irectional ontrol Valves 1, 2, 3 Spool Model R5100 VLVS Model R5200 Model R5300 V32 R MNUFTURG ORORTION.O. O 7000 NORTH SIOU ITY, SH KOT 57049-7000 URL: www.princehyd.com -MIL: prince@princehyd.com
More informationLMP 110 Maximum pressure 80 bar F l o w r a t e s t o l / m i n
LMP Maximum pressure 8 bar F l o w r a t e s t o 6 l / m i n Technical data Filter housing (Materials) Head: luminium Housing: ataphoresis Painting ypass valve: rass - luminium Pressure LMP length: - -
More informationHand & mechanical directional valves
www.atos.com Table E5-3/E Hand & mechanical directional valves ISO 44 sizes 6,, 6 and 25 H- Hand & mechanical operated directional valves are spool type, three or four way, two or three position valves,
More informationMODEL# 50-CORK5001 CUSTOMER SERVICE. 1 of 15. For fastest service, please visit our website at
OL# 50-ORK500 USTOR SRVI or fastest service, please visit our website at of 5 PRTS HRWR LIST PRT SRIPTIO STOK O. QTY. PRT SRIPTIO STOK O. QTY. Top Panel 2 ottom Panel 3 Side Panel Right 4 Side Panel Left
More informationMURRAY-CALLOWAY EDC INDUSTRIAL DEVELOPMENT
PHS: SHMTI SIGN - NOT OR ONSTRUTION T: 09..205 SHT INX SHT NUMR ISSU T esigner -03-04 SON LOOR PLN OI PLNS 09/5/5 09/2/5 GNRL G-000 G-00 OVR GNRL RQUIRMNTS RHITTURL -00-0 -02-05 -06-20 -30-302 -40-50 -60
More informationmiño 2000 valve GAS SERIES SCOPE SERVICE CONDITIONS TECHNICAL SHEET 06/2015 IP10010 PAG. 1/6
GS SRIS miño 2000 valve THNIL SHT 06/2015 IP10010 SOP MIÑO series are manually operated metallic ball valves. The valves can not be dismantle, avoiding tampering of components in contact with gas, and
More informationsil mla water meter valves
WTR SRIS QULITY Y TRITION sil mla water meter valves THNIL SHT 05/2017 IP09020 SOP SRVI ONITIONS SIL ML series are metallic ball valves manually operated that, due to their design are intended to be used
More informationCA14 SG Iron Air and Gas Trap ½" and ¾" (Screwed)
ert. No. LRQ 9638 ISO 91 14 SG Iron ir and Gas Trap ½" and ¾" (Screwed) TI-P148-1 ST Issue 6 escription The 14 is a range of float type automatic liquid drainers for air and gas systems. The body and cover
More informationgpphighpressure.com (417) BALL VALVES *Dimensions are subject to change and are considered reference.
LL VLVS 51 *imensions are subject to change and are considered reference. 2 1 TURS & NITS O PP LL VLVS Trunnion style ball valves w/positive shut-off in 10,000-15,000-psi (689-104-179 bar) esigned for
More informationSGP-20S SGP-25S SGP-32S SGP-40S. Price $ $ $ $ Filtered compressed air, lubricated or non-lubricated
SGP-S -JW SELF-ENTERING PRLLEL PNEUMTI GRIPPER (SERIES SGP-S) Double-ting. Ptented bklsh djusting system. High performne in ompt size. The rugged onstrution ensures trouble-free long life nd relibility
More informationHIGH-PRESSURE RELIEF VALVES H-900HP SERIES
IPRSSUR RLI VLVS 9P SRIS TURS n 9P is available as /P products. n 316St.St. onstruction n Service up to psi n Set Pressure from 5 psig to psig ( 3.5 to 414 bar) n Identifying colored springs for each pressure
More informationCost effective. Smooth. Reliable. LOG Internal Hole Gripper
LOG Cost effective. Smooth. Reliable. LOG Internal Hole Gripper Light gripper made of very resistant polyamide with closed diaphragm system Field of Application Particularly suited to highly dynamic applications
More informationALF400 to 900, ALT-5/-9
Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Auto feed lube 00 00-0 00 00 00 900 - --IS- -9 AIR : OIL : Fluid Proof pressure Air. MPa 0. MPa.0 MPa (Note ) Operating pressure differential
More informationRCP5W-RA Series. www. r o b o c y lind e r. d e. Dust-/Splash-/Water-proof RoboCylinder Rod Type with Battery-less Absolute Encoder
Product Data Sheets RCPW-RA RoboCylinder Brochure Extract GB Dust-/Splash-/Water-proof RoboCylinder Rod with Battery-less Absolute Encoder RCPW-RA Series www. r o b o c y lind e r. d e Specification Table
More informationDNS. Monoblock directional control valves DNS - Directional control valve
Monoblock directional control valves DNS - Directional control valve DNS efore use, carefully read the GENERL INSRUCIONS FOR USE OF DIRECIONL CONROL VLVES 398SMD6I - 6--8 DNS echnical data Nominal flow
More informationHand lever valves VHER
Hand lever valves VHER Hand lever valves VHER Key features Powerful Flexible Practical -M- Flow 170 3800 l/min 4/3-way valve mid-position closed mid-position exhausted mid-position pressurised Connections:
More informationBW0500AO. ByWire Elements BW0500AO Element 4/3 with side ports IBW0500 Interface
ywire Elements Element 4/3 with side ports IW5 Interface efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES 398SW5EN - 5--8 Technical data Nominal flow 5 l/min 3. US
More informationFino Installation Instructions
Fino nstlltion nstrutions #1500154- Rev C Fino nstlltion nstrutions A Light Fixture Trnsformer Qty: 0 or 1 1 C Prts Rotting Mgneti Mounts Qty: 3 or 6 2 D Fixe Mgneti Mounts Qty: 4 or 8 2 E Rotting Woo
More informationAuto Feed Lube, Auto Feed Tank ALF400 to 900, ALT-5/-9
Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Fluid Proof pressure Operating pressure differential range (Difference between tank pressure and line pressure) Vibration resistance
More informationWARNING SIGNS W1-1 THROUGH W25-2 G20-1 THROUGH G20-4 E5-2 THROUGH E5-3 E13-1 M4-8 THROUGH M4-10
WRNIN SINS W1-1 TROU W25-2 20-1 TROU 20-4 5-2 TROU 5-3 13-1 M4-8 TROU M4-10 NOT: LL WRNIN SINS US IN ONSTRUTION N MINTNN RS SLL V N ORN BKROUN XPT W10-1. MI/2012 Michigan epartment of Transportation Traffic
More information3/2-way valve, Series CD07 Qn= 1400 l/min pipe connection compressed air connection output: G 1/4 - M14x1,5 suitable for ATEX
/-way valve, Series CD07 Version Spool valve, zero overlap Sealing principle soft sealing Working pressure min./max. -0.95 bar / 0 bar Ambient temperature min./max. -5 C / +80 C Medium temperature min./max.
More informationNEEDLE VALVES TYPE RA
R NL VLVS TYP R The products are included in pressure adjusting accessories class. They are designed according to main requests regarding the security assurance of the pressure equipment users, mentioned
More informationMonoblock directional control valves ML - Directional control valve
Monoblock directional control valves ML - Directional control valve ML Before use, carefully read the GENERAL INSRUCIONS FOR USE OF DIRECIONAL CONROL VALVES 398SMD4I - 6--8 ML echnical data Nominal flow
More information10mm SHOWER PANEL SIZES 1000 & 1200 SIZES 500, 600, 700, 800 & 900 SIZES 1000 & 1200 OPTION 1 - PAGES 2-4 OPTION 2 - PAGES 2-5 OPTION 3 - PAGES 6-7
SHOWER PANEL 785 / Issue / 5 SIZES 5, 6, 7, 8 & 9 SIZES & SIZES & OPTION - PAGES - OPTION - PAGES - 5 OPTION 3 - PAGES 6-7 Plese red these instrutions refully nd keep for future referene. Inorret fitting
More informationS5 HAB/HAD SEAT Abductor / Adductor
Number S3-S5/QTY. DESRIPTION SF615 1 NITRO H SET FRME M635 1 LEFT MOVEMENT RM LK639 1 S3 H RNGE SELETOR LEVER S602 1 S3H SET K M634 1 RIGHT MOVEMENT RM LK635 1 S3H IDLER LINKGE SSY LK634 1 S3H SELETOR
More informationSpectrotec. Pressure regulators for acetylene
spectro tec Spectrotec Pressure regulators Regulator BT61 ca. 166 1/8"-NPT 83 113 48 1/4"-NPT 60 1/4"-NPT 33 105 Pressure regulator BT61 AC Specially For flow rates up to 8 m³/h acetylene Pressure regulator
More informationCA46S Austenitic Stainless Steel Air and Gas Trap DN40 and DN50
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationVG3000. Globe Valves Series for Terminal Units. Product Bulletin. 2-way PDTC (NO) with 6 bar close off pressure. Extend range of K VS
VG3000 Globe Valves Series for Terminal Units Product ulletin The VG3000 brass valve series is primarily designed to regulate the flow of water in response to the demand of a controller in zone and terminal
More informationIFP C175-* REMOTE CONTROL RELIEF VALVE
IFP C175-* REMOTE CONTROL RELIEF VLVE Low Pressure Differential Quiet Operation Easy to djust Handle Three Pressure Ranges vailable Panel Mount Design P T Model Pressure Range (PSI) Rated Flow (US GPM)
More informationVG3000. Globe Valves Series for Terminal Units. Product Bulletin. 2-way PDTC (NO) with 6 bar close off pressure. Extend range of K VS
VG3000 Globe Valves Series for Terminal Units Product ulletin The VG3000 brass valve series is primarily designed to regulate the flow of water in response to the demand of a controller in zone and terminal
More informationMPG-plus. Application example. Pneumatic 2-Finger Parallel Gripper Gripper for small components. Gripping force 38 N 175 N. Sizes
MPG-plus Sizes 25 40 Weight 0.06 kg 0.24 kg Gripping force 38 N 175 N Stroke per finger 3 mm 6 mm Workpiece weight 0.19 kg 0.7 kg Application example Pneumatically driven, dual-axis pick-and-place machine
More informationSplitting cylinder C20
Splitting cylinder C20 Product abbreviation C20 HN C20 = Size of splitting cylinder N or L = Wedge set length H / V / J / C = Mounting version Purpose of application Horizontal splitting (+/- 45 to the
More informationReproduction. Not for. Installation Instructions. Installation Instructions. Part No Installation. 32/36 Bagger 32/36 Kit WARNING
Installation Instructions Installation Instructions 32/36 agger 32/36 Kit Part No. 5600268 its 32/36 Mowers Kit ontents Part No. Qty. escription Part No. Qty. escription 5404389 1 Weld, agger Mount, 32/36
More informationSafety Please read and keep in a safe place Operating instructions Linear flow control VFC Linear flow control with actuator IFC
05 Elster GmbH Edition 0.5 Translation from the German 058 D F NL I E DK S N P GR TR CZ PL RUS H www.docuthek.com Operating instructions Linear flow control VFC Linear flow control with actuator IFC Contents
More informationAllspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW. Tel +44 (0)
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW Tel +44 (0)1254 615100 www.allspeeds.co.uk HOSE/UMBILICAL CUTTER HCV100 PRODUCT CODE No. 980292 INSTRUCTIONS
More informationKirra Entertainment Unit Assembly Instructions
irra ntertainment Unit Thank you for your purchase. lease follow the instructions below for correct assembly. dowel x x 0 wedge x C bolt x locking nut x x F G slide x rail long x N wheel slide rail H I
More information2-JAW SELF-CENTERING PARALLEL PNEUMATIC GRIPPER (SERIES SZ)
2-JAW SELF-CENTERING PARALLEL PNEUMATIC GRIPPER (SERIES ) Double-acting. Spring closed (upon request). Patented self-centering system. Multiple mounting and porting options. Optional magnetic sensors.
More information600 Series. Brass Ball Valves
Series Brass Ball Valves full range of economical brass ball valves intended for your common fluid control applications. vailable in standard and full port threaded, full port solder end, and full port
More informationALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa 0. MPa.0 MPa (Note
More informationOWNER S MANUAL. Pergola with Canopy. Product code: D71 M12214 UPC code: Vendor Item: S-PG11D1. Date of purchase: / /
OWNR S MNUL Product code: 71 M12214 UP code: 769455 761125 Vendor Item: S-P111 Pergola with anopy ate of purchase: / / 1 Special Warning ssemble your pergola on a soft, non-abrasive surface to avoid damage.
More informationPro. acces. - Spray handles & hoses
Model: Spray handles and hoses Part List US-English Table of Contents ERGO 3000 Spray handle with swivel lock - from 15. 3 ERGO 3000 Spray handle - from 01.02.02 5 ERGO 2000 Spray handle 7 ERGO 2000 VP
More informationB2KL: 6-way ball valve with male thread, PN 16
Product data sheet 3.1 58.001 K: 6-way ball valve with male thread, PN 16 How energy efficiency is improved fficiency means precise control and low actuating forces eatures 6-way ball valve for changeover
More informationADCATROL PNEUMATIC CONTROL VALVES V403 (V403 globe valves series with linear actuators PA or EL series)
TROL PNEUMTIC CONTROL VLVES V40 (V40 globe valves series with linear actuators P or EL series) DESCRIPTION The PV40 control valves are three-way valve body for mixing service. The P pneumatic actuator
More informationVibration isolation system 1VIS10W. User manual
Vibration isolation system 1VIS10W User manual Standa 2014 Table of contents 1. General information 3 1.1. Introduction 3 1.1.1. Safety 5 1.2. Location of the table 5 1.3. Air supply requirements 5 2.
More information2.4M Viking Swing Basket Swing
.M Viking Swing Basket Swing PROD. CODE SIZE AGE RANGE F/ FALL HEIGHT HEAVIEST PART TOTAL WEIGHT 75x75x150 5 to Adult 1.5 Metres Approx 6Kg Approx 198Kg SPECIFICATION Solid steel components to EN 10087:1998
More informationWeatherproof Products
Red ot Iberville arlon Weatherproof Products S oxes and overs pplications : S boxes are S approved for wet locations S device boxes are installed in applications that require a rugged unit to accept wiring
More informationHIGH-PRESSURE RELIEF VALVES
HIGH-PRESSURE RELIEF VALVES H-9HP SERIES FEATURES n St.St. 316 Construction n MAWT up to 6 psi n Set Pressure from 5 psig to 6 psig ( 3.5 to 4 bar) n Identifying colored springs for each pressure range
More informationF Fittings with 24 cone as per DIN EN ISO Fitting accessories, plug-type connectors, hydraulic pipes, pipe clamps, pressure gauges
Fittings with 24 cone as per DIN EN ISO 8434-1 Fitting accessories, plug-type connectors, hydraulic pipes, pipe clamps, pressure gauges Issue 8-17 E F 9.300 Advantages NNWorldwide spread high-pressure
More informationIntro to Graph Theory
Intro to Grph Thory 04 IOI Cmp Rort Spnr Dmr, 0 Rort Spnr Intro to Grph Thory /0 Introution This is grph: 4 Rort Spnr Intro to Grph Thory /0 Introution This is not grph: x(x + )(x ) 4 0 - -4 - - -. - -0.
More informationSafety Please read and keep in a safe place Operating instructions Linear flow control VFC Linear flow control with actuator IFC
07 Elster GmbH Edition 06.7 Translation from the German 058 D GB F NL I E DK S N P GR TR CZ PL RUS H www.docuthek.com Operating instructions Linear flow control VFC Linear flow control with actuator IFC
More informationTHE HF-210 SERIES. Operating and Service Manual. Series includes all variants of HF-210/211. Issue A October 2014 *Section 6.
THE HF-210 SERIES Operating and Service Manual Series includes all variants of HF-210/211 Issue A October 2014 *Section 6.1 in development 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3.
More informationOperating Instructions Model and Hydrostatic Test Pump
Operating Instructions Model 29200 and 2920 Hydrostatic Test Pump Dimension Weight Pump Pressure for 29200 Pump Pressure for 2920 Gauge for 29200 Gauge for 2920 Inlet Connection Outlet Connection Hose
More informationIndia Mark Handpump. Available Models & OperatingData: Materials of Construction: HANDPUMP. Recommended for water level setting depth (meters)
India Mark Handpump Available Models & OperatingData: Pump Model India Mark II India Mark III India Mark II Extra Deep well Afridev Head 12 to 45 m 12 to 33 m 50 to 85 m 45 m Minimum ID of bore (millimeter)
More informationComponents for Pull Rope Systems. Leaflet No. Kiepe 680
Components for Pull Rope Systems Leaflet No. Kiepe 680 APPLICATION Pull ropes are used as actuators for operation of pull rope emergency stop switches along coveyor belts. The Kiepe pull ropes and accessories
More informationFlow control valves Series RFU - RFO 2/
CATALOGUE > Release 8.5 > Valves Series RFU - RFO Flow control valves Series RFU - RFO Unidirectional and bidirectional flow control valves Ports: M5, G1/8, G1/4, G3/8 and G1/ Nominal diameter: M5 = 1,5
More informationHigh-Purity. Ball Valves
High-Purity s Components MANUFACTURING ASSEMBLY TESTING HP High-Purity s CFOS Applications Cost-effective systems where cleaning for oxygen-grade services are required, such as: Clean-Dry Air (CDA), Oil-Free
More informationTrench Cable Rollers - Straight Pulling Application
Trench Cable Rollers - Straight Pulling Application Straight Cable Roller Straight Cable Roller - Heavy Duty Two Casing Supports, Roller body made of Precision Steel Tube. German Bearings protected against
More informationPFH. Application example. Pneumatic 2-Finger Parallel Gripper Long-stroke Gripper. Weight 2.65 kg 12.6 kg. Gripping force 630 N 2950 N
PFH www.comoso.com Sizes 30 50 Weight 2.65 kg 12.6 kg Gripping force 630 N 2950 N Stroke per finger 30 mm 100 mm Workpiece weight 3.15 kg 13 kg Application example Assembly unit for intermediate sleeves
More informationInverse Proportional Pressure-Relief Cartridge, Size 10
Inverse Proportional Pressure-Relief Cartridge, Size 1 Q max = 12 l/min, p max = 3 bar Seated pilot, spool-type main stage, damped design 1 Description inverse-proportional pressure-relief valves are size
More informationLMP Filter element in according to DIN Style B. Style S. Maximum pressure 30 bar F l o w r a t e s t o l / m i n D.I. D.I.
LMP 900-90 Filter element in according to D 550 Style S Style D.I. D.I. Maximum pressure 30 bar F l o w r a t e s t o 0 0 0 l / m i n 6 Technical data Filter housing (Materials) Head: nodised luminium
More informationAIR/OVER HYDRAULIC JACK 20 TON
AIR/OVER HYDRAULIC JACK 0 TON 4487 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 999 by Harbor Freight Tools.
More informationPioneers in Fluid Power
ULLO SPLTS OMPNY... Pioneers in luid Power stablished in 1912, ULLO was incorporated in 19 under its present name and trademark. Patents for the original guided piston, directacting relief valve were obtained
More informationCatalogue Extract RCP4 Cleanroom Type with Pulse Motor. 42P Motor type. size : 12mm 6 : 6mm 3 : 3mm
RCPCR RoboCylinder RCPCR-SAC Model Specific. Items RCPCR Series SAC I Encoder type Catalogue Extract RCP Cleanroom with Pulse Motor 2P Motor type Cleanroom RoboCylinder, Slider, Motor Unit Coupled, Actuator
More informationShut-off ball valve Type GBC
Data sheet Shut-off ball valve GBC shut-off ball valves, type GBC, are manually operated shut-off valves suitable for bi-directional flow. The GBC valves are used in liquid, suction and hotgas lines in
More informationPremium Series. Economical Price & Reliable Performance. High Quality. Rust-Resistant. Long Life. Tamper-Resistant locking Screw.
Premium Series High Quality Forged Brass Body Rust-Resistant Nickel Plated Finish Long Life Corrosion Resistant Valve Seat Economical Price & Reliable Performance Tamper-Resistant locking Screw Reduces
More informationWorkrite Sierra HX & HXL Assembly Instructions for 3-leg Electric Workcenters
Workrite ierr HX & HXL Assemly Instrutions for 3-leg Eletri Workenters #1500216- Rev Workrite ierr HX & HXL Eletri Workenters - Assemly Instrutions for 3-leg les Rer Leg rket* Qty: 2 List of rts, grouped
More informationSB 102. Spare parts list. Hydraulic breakers. SB 102 s/n BES Construction Tools PC AB No h
SB 102 Spare parts list Hydraulic breakers SB 102 s/n BES043603 2018 Construction Tools PC AB No. 9800064201h 2018-01 General information This spare parts list applies to the following: Part number 8460030030
More informationStainless steel valves for corrosive environments & water base fluids
www.atos.com Table E135-10/E Stainless steel valves for corrosive environments & water base fluids explosion-proof soleid valves, with tex, IEEx or UL US certification and pressure relief valves LOHX(S)6-3/M-O/V
More informationSBU 220. Spare parts list. Hydraulic breakers. SBU 220 s/n BES Construction Tools PC AB No
SBU 220 Spare parts list Hydraulic breakers SBU 220 s/n BES090753 2018 Construction Tools PC AB No. 9800097101 2018-01 General information This spare parts list applies to the following: Part number Description
More informationEXH. Specifications. Descriptions. Min. working pressure MPa
Functional explanation Primary pressure flowed from passes through check valve on side, and flows in chamber A and B. Primary pressure also passes through pressure adjustment section and switching valve,
More informationDual Modular Safety Shutoff Valves. DMV-D/11 Series DMV-DLE/11 Series
Dual Modular Safety Shutoff Valves DMV-D/11 Series DMV-DLE/11 Series Two normally closed safety shutoff valves in one housing; each with the following approvals. CSA Certified ANSI Z21.21 CSA 6.5 Marked
More informationSB 52. Spare parts list. Hydraulic breakers. SB 52 s/n BES Construction Tools PC AB No j
SB 52 Spare parts list Hydraulic breakers SB 52 s/n BES043707 2018 Construction Tools PC AB No. 9800069301j 2018-01 General information This spare parts list applies to the following: Part number 8460030010
More informationCA44 and CA44S Carbon Steel Air and Gas Traps Flanged DN15 to DN25
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationPWG-S. Application example. Pneumatic 2-Finger Angular Gripper Universal Gripper. Sizes. Gripping moment 5.98 Nm Nm. Weight 0.21 kg 1.
PWG-S Sizes 40 80 Weight 0.21 kg 1.2 kg Gripping moment 5.98 Nm 50.82 Nm Angle per jaw 20 Workpiece weight 1.1 kg 4.8 kg Application example Rotating/gripping combination for flexible handling of sheet
More informationVPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES 10
/ ED VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES OPERATING PRINCIPLE The VPPL are variable displacement axial-piston pumps with variable swash plate, suitable for applications
More informationLiquid Tight Strain Relief Fittings, Accessories & Conduit System
Liquid Tight Strain Relief Fittings, ccessories & Our Service makes the difference! 20 years of excellence! Table of Contents Nylon Strain Relief Fittings Page escription 3 Nylon Fittings - Introduction
More informationBeamex PG PRESSURE GENERATORS. Beamex PGM PGV PGC PGHH PGPH PGL
Beamex PG PRESSURE GENERATORS 97 Beamex PGM PGV PGC PGHH PGPH PGL Beamex PG pressure generators are portable hand-operated pressure generators and ultimate field calibration pumps 98 Calibration pumps
More informationSizes Weight Gripping force Stroke per finger Workpiece weight Pieces : kg N mm kg
MPG-plus Sizes Weight Gripping force Stroke per finger Workpiece weight Pieces : 7 0.06.. 0.63 kg 25.. 350 N 1.5.. 10 mm 0.19.. 1.25 kg Application example Pneumatically driven, dual-axis pick-andplace
More informationECP Series Explosionproof Enclosures for OEM Applications. Optimized design, extensive sizes, and fast lead times.
ECP Series Explosionproof Enclosures for OEM Applications Optimized design, extensive sizes, and fast lead times. ECP Series Explosionproof Enclosures, the latest addition to our portfolio of electrical
More information2-port and 3-port valves PN 16
OEM 2-port valves VVP459.10-0.63 to VVP459.25-6.3 3-port valves VXP459.10-0.63 to VXP459.25-6.3 3-port valves with bypass VMP459.10-0.63 to VMP459.20-4 2-port valves VVP459.25-6.3 to VVP459.40-25 3-port
More informationSOLENOID VALVES AND PNEUMATIC VALVES
9 S E R I E S Electropneumatically and pneumatically operated valves Series 9 Assembly with sub-base (ISO 5599/1 Standards) Sizes 1, 2 and 3 The Series 9 electropneumatically or pneumatically operated
More informationALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa Max. operating pressure
More informationTA-H.U.B. Centralised balancing and control ENGINEERING ADVANTAGE
Prefab units TA-H.U.B. Centralised balancing and control Pressurisation & Water Quality Balancing & Control Thermostatic Control ENGINEERING ADVANTAGE This customised balancing solution lets you balance
More informationTRAILER TIRES HIGH SPEED BIAS TRAILER TIRES. Load Range
TRAILR TIRS HIGH SP BIAS TRAILR TIRS 8B 8 5708B 5708 5708 81 531 531 6909.-8.-8 5.70-8 5.70-8 5.70-8.-1 5.-1 5.-1-9 B B 16.7 16.7 18.6 18.6 18.6 1.3.1.1 0.9.6.6 5.6 5.6 5.6 5. 5.3 5.3 6..00.00.00 5.00
More informationElectrically Operated Pressure-Relief Cartridge, Size 10
Electrically Operated Pressure-Relief Cartridge, Size 1 Q max = 14 l/min (37 gpm), p max = bar (5 psi) seated pilot stage, spool-type design, with remote contral port Z Series WUVPOC-2, WUVPLC-2 1 Description
More informationSB 152. Spare parts list. Hydraulic breakers. SB 152 s/n BES Construction Tools PC AB No
SB 152 Spare parts list Hydraulic breakers SB 152 s/n BES043707 2018 Construction Tools PC AB No. 9800041001 2018-01 General information This spare parts list applies to the following: Part number 8460030040
More informationconnected to innovation
connected to innovation LOWGUNS new-generation blowguns Compact compressed-air blowguns with integrated plug Users will appreciate the prevo S1 blowguns in their daily operations, for their ease of use.
More informationPressure regulators Manually operated Fine setting valves. Brochure
Pressure regulators Manually operated s Brochure Pressure regulators Manually operated s Qn = 9 l/min Actuating element: Push button Internal thread Poppet valve Qn = 9 l/min Actuating element: Push button
More informationINDUSTRIAL EXCESS ESS FLOW VALVES
INDUSTRIAL EXCESS ESS FLOW VALVES H-911 SERIES FEATURES n Stainless Steel Construction n MAWP 6000 psi (413 bar) n MAWT 400 F (204 C) n Variable connection sizes (1/8 to 1/2'' & 6 to 12mm) n Cv = 0.5 ;
More informationLGR. Application example. Pneumatic 2-Finger Radial Gripper Universal Gripper. Sizes. Gripping moment 0.3 Nm 15 Nm. Weight 0.07 kg 1.
LGR Sizes 10 40 Weight 0.07 kg 1.27 kg Gripping moment 0.3 Nm 15 Nm Angle per jaw 90 Workpiece weight 0.07 kg 1066 kg Application example Rotational adjustment for reorientation of workpieces 2-Finger
More informationTRACTOR SPECS. TUNE-UP PARTS FILTER LIST LUBRICATION SPEC. LIST GENERAL SPECS. AND ATTACHMENT SPECS.
7000 and 8000 Compact Tractor Specs. TRACTOR SPECS. TUNE-UP PARTS FILTER LIST LUBRICATION SPEC. LIST GENERAL SPECS. AND ATTACHMENT SPECS. SOME PARTS MAY HAVE BEEN UPGRADED. ALWAYS CONFIRM ORIGINAL PART
More informationThis Manual contains standard Production Product Identification Numbers. Special Engineered Options not Included. 100D MS Standard Mast
P ARTS MANUAL This Manual contains standard Production Product Identification Numbers. Special Engineered Options not Included 100D MS Standard Mast For PIDs 100D-MS-001 THROUGH PRESENT FOR PARTS AND SERVICE:
More informationGWB Pneumatic 2-Finger Radial Gripper Universal Gripper Sizes Weight Gripping moment Opening angle per finger Workpiece weight
GWB Sizes 34.. 100 Weight 0.14 kg.. 3.5 kg Gripping moment 2.1 Nm.. 127 Nm Opening angle per finger 10.. 90 Workpiece weight 0.3 kg.. 6.0 kg Application example Rotating/gripping combination for handling
More information