Independent Wellhead Products
|
|
- Martin Barker
- 6 years ago
- Views:
Transcription
1
2 New Products
3 Poster
4 Independent Wellhead Products Weir Independent Line Offers Comprehensive 1500 psi stack-up 3000 psi stack-up 5000 psi stack-up with dual ram BOP High-temp applications available 10K psi BOP offering available 6805 Silsbee Houston, TX (713) Gilmore Avenue Bakersfield, CA (661)
5 W2F/W2 Profile Tubing Head WK/WMK/WSK Tubing Head WR/WMR/WSR Tubing Head Model W92 Casing Head WX Tubing Head Belled Nipples Drilling Flanges Companion Flanges Wellhead Equipment
6 2M psi / 3M psi / 5M psi working pressure ratings available 4M psi / 6M psi / 7.5M psi test pressure ratings Slip flange available with 85M lb. maximum slip load High temperature elastomers available on request Unique V-Style rubber packing ring which energizes under pressure to provide superior seal in slip flange style Slip Flange With Stripper Rubber B1 Adapter With Mandrel B2 Adapter With Mandrel Seaboard W2F / W2 Profile Tubing Head Tubing head with bottom threaded or slip/weld on connection X flanged top connection Specifications W2F/W2 2M psi W2 3M psi W2 5M psi Working Pressure 2M psi 3M psi 5M psi Test Pressure 4M psi 6M psi 7.5M psi Max Load Limit 85M lb Contact Customer Service Hold Down Screws or 6 Stud Nut Sizes 1 in. 8UN x 7 1/2 in. (12) 1 1/8 in. 8UN x 8 1/2 in. (12) 1 3/8 in. 8UN x 11 1/4 in. (12) Weight 220 lb 285 lb 500 lb Body Material Fabricated/Forged Forged Threaded Suspension Type Slip Flange Mandrel Bottom Thread 4 1/2 in /2 in. - 7 in Bottom Connection LTC Box or SOW Tubing Size 2 in. - 3 in. Side Outlets 2 in. LPO Minimum Bore 4.06 in in in. HEIGHT 18 1/2 in. WEIGHT 220 lb 285 lb 500 lb
7 1.5M psi working pressure 3M psi test pressure Maximum slip load: 65M lb Unique V-Style rubber packing ring which energizes under pressure to provide superior seal in slip style High temperature elastomers available on request Available in both slip style for pumping wells or mandrel style for gas well applications WK WMK WSK Seaboard WK / WMK / WSK Tubing Head 1.5M psi Tubing Head WK/WMK Tubing Head Bottom Thread 4 1/2 in. 5 1/2 in. 7 in. Inner String Size 1 in. to 2 1/2 in. 1 in. to 2 1/2 in. 1 in. to 3 in. Minimum Bore 4.06 in in in. Bottom Connection Working Pressure Test Pressure Max Load Limit Cap Thread Cap Material Type of Suspension Side Outlets Body Material Height Weight Stripper Rubbers 8rd 1.5M psi 3M psi 65M lb 7 5/8 in. 8rd Ductile Slip or Mandrel 2 in. LPO Ductile 12 in. 82 lb N/A Specifications WSK Tubing Head 4 1/2 in. 5 1/2 in. 7 in. 1 in. to 2 1/2 in. 1 in. to 2 1/2 in. 1 in. to 3 in in in in. 8rd 1.5M psi 3M psi 65M lb 7 5/8 in. 8rd Ductile Slip or Mandrel 2 in. LPO Ductile 16 1/2 in. 116 lb 1 in /2 in.
8 2M psi - 3M psi working pressure rating 4M/6M psi test pressure Maximum slip load: 85M lb High temperature elastomers available Available in both slip style for pumping well or mandrel style for gas well applications Unique V-style rubber packing ring which energizes under pressure to provide superior seal in slip style Seaboard WR / WMR / WSR Tubing Head 2M/3M psi working pressure Tubing Head 2M psi WR/WMR/WSR Tubing Head Bottom Thread 4 1/2 in. 5 1/2 in. 7 in. Inner String Size 1 in. to 2 1/2 in. 1 in. to 3 in. 1 in. to 3 in. Minimum Bore 4.06 in in in. Bottom Connection Working Pressure Test Pressure 8rd or SOW 2M psi 4M psi Max Load Limit 85M lb Cap Thread Cap Material Type of Suspension Side Outlets Body Material WR Height WR Weight WSR Height WSR Weight Stripper Rubbers 8 5/8 in. 8rd Ductile Slip or Mandrel 2 in. LPO Steel 13 3/8 in. 128 lb 19 1/8 in. 183 lb 2 in. - 3 in. Specifications 3M psi WR/WMR/WSR Tubing Head 4 1/2 in. 5 1/2 in. 7 in. 1 in. to 2 1/2 in. 1 in. to 3 in. 1 in. to 3 in in in in. 8rd or SOW 3M psi 6M psi 85M lb 8 5/8 in. 8rd Steel Slip or Mandrel 2 in. LPO Steel 13 3/8 in. 132 lb 19 1/8 in. 187 lb 2 in. - 3 in.
9 2M psi working pressure (WP) rating 4M psi test pressure rating Maximum slip load: 176M lbs Unique V-style rubber packing ring which energizes under pressure Slips can be attached on the rig floor Saves time and provides safer BOP run through Ability to run through BOP is safer and saves time making it cost effective V-style rubber packing provides superior sealing capabilities Seaboard Model W92 Casing Head The Seaboard TM Model W92 Casing Head suspends casing and isolates the well bore in applications with either rod pumps or gas wells Specifications W92 Casing Head Bottom Thread 7 in. 7 5/8 in. 8 5/8 in. 9 5/8 in. 10 3/4 in. 11 3/4 in. 12 3/4 in. 13 3/8 in. Cap Thread 8 5/8 in. 8rd 10 3/4 in. 8rd 10 3/4 in. 8rd 11 3/4 in. 8rd 12 3/4 in. 8rd 16 in. 8rd 16 in. 8rd 16 in. 8rd Inner String Size 4 1/2 in. 4 1/2 in. to 5 1/2 in. 4 1/2 in. to 7 in. 4 1/2 in. to 7 5/8 in. 4 1/2 in. to 8 5/8 in. 4 1/2 in. to 9 5/8 in. 4 1/2 in. to 9 5/8 in. 4 1/2 in. to 9 5/8 in. Minimum Bore 6.44 in in in in in in in in. Weight 110 lb 134 lb 161 lb 203 lb 231 lb 297 lb 363 lb 431 lb Height 13 5/8 in. 15 7/8 in. Bottom Connection Cap Material Type of Suspension Side Outlets Body Material 8rd or SOW Ductile Slip or Mandrel 2 in. LPO Steel
10 Available in 2M psi, 3M psi and 5M psi working pressures Available in Slip and Seal design or Mandrel Tubing Hanger Slip and Seal parts available for 1 1/4 in. (1.66 in.) and 1 1/2 in. (1.90 in.) Available for coil tubing applications Availability of 2 7/8 in. EUE 8rd bottom connection which reduces the probability of added connections to adapt from a casing thread to a tubing connection size Seaboard WX Tubing Head 2M, 3M & 5M psi working pressure Tubing Head Small compact design that benefits when running a velocity string in a plunger lift application Availability of 2 7/8 in. EUE 8rd bottom connection which reduces the probability of added connections to adapt from a casing thread to a tubing connection size Sizes 2 7/8 in. UPTBG x 1.66 in. Slip & Seal 2 7/8 in. UPTBG x 1.90 in. Slip & Seal
11 Rated at 2M psi maximum working pressure 5M psi working pressure available in 4 1/2 in. 7 in. sizes Adapts plain end pipe to a male threaded connection When used with a belled nipple, casing can be cut at desired length and belled nipple can be welded on Seaboard Belled Nipples Slip on weld X male thread SOW Connection Size 8rd (in.) Height (in.) Weight (lb) 4 1/2 x 4 1/ /2 5 1/2 x 5 1/2 6 3/4 7 1/2 7 x 7 7 3/4 16 1/2 8 5/8 x 8 5/ /2 9 5/8 x 9 5/ /4 x 10 3/4 8 42
12 Economical method of adapting BOP to wellhead All flanges rated at 2M psi maximum working pressure Adapts a flanged BOP to an independent style or threaded wellhead connection O-ring seal on flange face to wellhead Seaboard Drilling Flanges 2M psi maximum working pressure API Flange Size Max Working Pressure (psi) Thread Size (in.) Ring Gasket No. of Studs Stud Size (in.) For Use With O-Ring Size WDTH 7 1/16 in. 2M 7 5/8 8rd R x 7 1/2 WK in. 3M 7 5/8 8rd R /8 x 9 1/2 WK /16 in. 2M 8 5/8 8rd R x 7 1/2 WR /16 in. 3M 8 5/8 8rd R /8 x 8 1/2 WR in. 3M 8 5/8 8rd R /8 x 9 1/2 WR /16 in. 2M 8 5/8 8rd R x 7 1/2 W92 7 in in. 3M 8 5/8 8rd R /8 x 9 1/2 W92 7 in in. 2M 10 3/4 8rd R /4 x 9 1/4 W92 8 5/8 in in. 3M 10 3/4 8rd R /8 x 10 W92 8 5/8 in in. 2M 11 3/4 8rd R /4 x 9 1/4 W92 9 5/8 in in. 3M 11 3/4 8rd R /8 x 10 W92 9 5/8 in /8 in. 2M 12 3/4 8rd R /4 x 9 1/2 W /4 in /8 in. 3M 12 3/4 8rd R /8 x 10 3/4 W /4 in /8 in. 2M 16 8rd R /4 x 9 1/2 13 5/8 in. 3M 16 8rd R /8 x 10 3/4 W /4 in. W /4 in. W /8 in. W /4 in. W /4 in. W /8 in
13 Manufactured to API 6A Specifications Other sizes available Adapts a flange connection to a threaded connection Seaboard Companion Flanges Flanged to Threaded Adapters Description 1 13/16 in. 10M x 2 in. LPO F/5M service 1 13/16 in. 10M x 2 3/8 in. EUE 8rd F/5M service 2 1/16 in. 5M x 2 in. LPO 2 1/16 in. 5M x 2 1/16 in. LPO 5M x 2 3/8 in. EUE 2 9/16 in. 5M x 2 in. LPO 2 9/16 in. 5M x 2 7/8 in. EUE 8rd
14 W-500FS and W-500FC Flanged Rod Bop W-500F Flanged Rod BOP Single/Dual W-300 and 500T Threaded Rod Blow-Out Preventer W-212 Blow-Out Preventer W-150 Blow-Out Preventer 5K Pumping Tee 3K Pumping Tee High Temperature Double Pack Stuffing Boxes (W-HPSB) High Pressure Double Pack Stuffing Boxes with Flapper Valve (W-HPSBF) Stuffing Box (W-SB) Tee Based Stuffing Box (W-SBT) Inverted Stuffing Box (W-IVSB) Inverted Tee Based Stuffing Box (W-IVSBT) Big Shot (W-BS) Stuffing Box W-Big Shot Tee Based (W-BST) Stuffing Box Double Pack Stuffing Box (W-DPSB) Inverted Double Pack Stuffing Box (W-IVDPSB) Big Shot Double Pack (W-BSDP) Stuffing Box Pollution Controlled Double Pack Stuffing Box (W-PCDP) 5M Stuffing Box Packing Options V-Style Packing BUNA (Soft) Cone Packing Seagold TM HT (Kevlar Brass Filled) Cone Packing HSN Cone Packing PFTE Cone Packing PFTE Filled Cone Packing High Tensile Cone Packing Soft-Lubricated Cone Packing Seagold TM (Brass Filled) Cone Packing Environmental Control Adapter (ECA) High Pressure Lube Upper Gland (W-HPLUG) Lube Upper Gland (W-LUG) Polished Rod Clamps - W-25 series/w-40 series Polished Rod Clamps - W-10S series/w-10d series/w-10t series Polished Rod Lubricator Leveling Plates Rod Rotators Production Equipment
15 Multiple flange configurations available Integral tee available Test ports available Standard Rams available Blind Rams available Hydraulic Rams available upon request Integral tee design reduces height Seaboard W-500FS and W-500FC Flanged Rod BOP Flanged X Studded Ram BOP Ram & stem are nitride coated to prevent galling Indicating grooves help facilitate correct opened and closed position Available with standard sealing Rams or with ceramic coated rod clamping Rams, to prevent damage to the polished rod. NOTE: Alternative flange sizes/configurations available upon request. Custom pricing may apply.
16 Multiple flange configurations available Integral tee available Test ports available Standard Rams available Blind Rams available Hydraulic Rams available upon request Dual Ram Manual Single Ram Manual Integral tee design reduces height Spare parts are readily available for this design Can be used in conjunction with flanged wellhead equipment Seaboard W-500F Flanged Rod BOP Single/Dual Flanged X Studded Ram BOP NOTE: Alternative flange sizes/configurations available upon request. Custom pricing may apply.
17 W-300 W-500T W-500T Cross Section Seaboard W-300 and 500T Threaded Rod Blow Out Preventer Available in 4 in. and 5 in. nominal sizes with full opening bore Suitable for low temperature (-50 F), & sour service (NACE MR-01-75) Available in high temperature models 3M psi & 5M psi max pressure rams available in 1 1/4 in., 1 1/2 in. or blind Low pressure (1.5M psi max when closed) BOP body capable of 5M psi shell test when rams are opened. Pressure balanced rams allow use of well pressure to assist in closing process, reducing operator effort Forged alloy steel body eliminates risk of casting porosity Secures well by sealing around the polished rod Connections Box (up) Pin (down) 2 3/8 in. EUE 2 3/8 in. EUE 2 7/8 in. EUE 2 7/8 in. EUE 3 1/2 in. EUE 3 1/2 in. EUE 3 in. LPO 3 1/2 in. EUE 3 in. LPO 3 in. LPO NOTE: 3M psi (ductile) & 5M psi (4130) rams are NOT interchangeable
18 Packing Gland Packing Cap Ram Screw Ram Ratigan Style Blowout proof ram screw Full opening Reinforced ram block Fusion bonded coating available for corrosive applications Cost effective BOP Body Reliable for customer and end user use Seaboard W-212 Blow-Out Preventer Secures well by sealing around the polished rod Optional Features Fusion bonded corrosion protection coatings available Stainless steel for NACE trim available Specifications W-212 Sizes Available 2 3/8 in. EUE 8rd 2 7/8 in. EUE 8rd 3 1/2 in. EUE 8rd 3 in. LPO Vertical Bore in in in in. Body and Cap Material Ram Materials Available Ram Screw and Packing Gland Ram Sizes Connection Handles Working Pressure Ductile Buna, Seagold TM HT, HSN Carbon steel Stainless steel available upon request Blind, 5/8-1 in., 1 1/4 in., 1 1/2 in., 1 3/4in. pin x box Optional 1.5M psi Copyright 2014 Seaboard International, Inc. All rights reserved. SEABOARD and SEAGOLD are trademarks and/or registered trademarks of Seaboard International, Inc.; WEIR and WEIR (logo) are trademarks and/or
19 Packing Gland Packing Cap O-Ring Ram Screw Ram Huber style Quick opening Blowout proof ram block Reinforced ram block O-ring on end caps provide reliable and pressure tight seal Cap with internal threads protected from environment BOP Body ACME thread end-cap eliminates cross threading Seaboard W-150 Blow-Out Preventer Secures well by sealing around the polished rod. Optional Features Fusion bonded corrosion protection coatings available Stainless steel for NACE trim available Specifications W-150 Sizes Available 2 3/8 in. EUE 8rd 2 7/8 in. EUE 8rd 2 1/2 in. LPO 3 in. LPO Vertical Bore in in in in. Body and Cap Material Ram Materials Available Ram Screw and Packing Gland Ram Sizes Connection Handles Working Pressure Ductile Buna, Seagold TM HT, HSN Carbon steel Stainless steel available upon request Blind, 5/8-1 in., 1 1/4 in., 1 1/2 in., 1 3/4in. pin x box Optional 1.5M psi Copyright 2014 Seaboard International, Inc. All rights reserved. SEABOARD and SEAGOLD are trademarks and/or registered trademarks of Seaboard International, Inc.; WEIR and WEIR (logo) are trademarks and/or
20 Applications up to 5M working pressure Select sizes available to meet NACE requirements 1 in. bleeder standard Available with corrosion resistant coatings upon request Cost effective Robust and reliable Seaboard 5K Pumping Tee Redirects fluid and gas to a holding tank (wing) from the run EUE 8rd Bottom (in.) EUE 8rd Top (in.) LPO Outlet Side (in.) 1 in. LPO Bleeder on All 2 3/8 2 3/ /8 2 7/ /8 2 7/ / /2 3 1/ /2 3 1/2 3
21 Applications up to 3M psi working pressure Select sizes available to meet NACE requirements Both EUE and LPO available 1 in. bleeder standard Available with corrosion resistant coatings upon request Some sizes available in 5M psi working pressure Cost Effective Seaboard 3K Pumping Tee Redirects fluid and gas to a holding tank (wing) from the run Reliable for customers Bottom (in.) Bottom LPO EUE 8rd Top (in.) Box Bottom Top LPO EUE 8rd Outlet LPO (in.) LPO Bleeder (in.) 2 3/8 EUE8rd 2 LPO /8 EUE 8rd 2 3/8 EUE 8rd /8 EUE 8rd 3 LPO /8 EUE 8rd 2 LPO /8 EUE 8rd 2 3/8 EUE 8rd /8 EUE 8rd 2 7/8 EUE 8rd /8 EUE 8rd 2 7/8 EUE 8rd 2 1/ /8 EUE 8rd 2 7/8 EUE 8rd /8 EUE 8rd 2 1/2 LPO /8 EUE 8rd 2 1/2 11 1/2V /8 EUE 8rd 3 LPO /8 EUE 8rd 3 LPO /2 LPO 2 3/8 EUE 8rd /2 EUE 8rd 3 LPO /2 EUE 8rd 3 LPO /2 EUE 8rd 3 1/2 EUE 8rd /2 EUE 8rd 3 1/2 EUE 8rd LPO 3 LPO 3 1
22 Seaboard 3k Pumping Tee con t Bottom (in.) Bottom LPO EUE 8rd Top (in.) Pin Bottom Top LPO EUE 8rd Outlet LPO (in.) LPO Bleeder (in.) 2 3/8 EUE8rd 2 LPO /8 EUE 8rd 2 3/8 EUE 8rd /8 EUE 8rd 2 3/8 EUE 8rd /8 EUE 8rd 2 7/8 EUE 8rd /8 EUE 8rd 2 1/2 LPO /8 EUE 8rd 2 1/2 11 1/2V /8 EUE 8rd 2 1/2 11 1/2V /8 EUE 8rd 3 LPO LPO 3 LPO 3 1
23 Upper packing can be replaced under pressure Available with pollution control check valve Available in flanged or threaded versions For improved performance, use in conjunction with W-plug Easily incorporated into any existing wellhead completion Suitable for steam applications Suitable for sour service all materials conform to NACE MR requirements Seaboard High Temperature Double Pack Stuffing Boxes (W-HPSB) The W-HPSB Double Pack Stuffing Box is a self-contained, low profile, durable unit designed to operate at pressures up to 3M psi and temperatures up to 650 F
24 Integrated flapper valve that closes automatically if Polished Rod breaks Suitable for sour service all materials conform to NACE MR specifications V- Style upper (primary) packing. Available in 2 3/8 in., 2 7/8 in. & 3 1/2 in. EUE 8RD Male thread Available in 1 1/4 in. & 1 1/2 in. Polished Rod sizes Can be used in conjunction with a W-plug for improved performance Upper packing can be replaced under pressure Seaboard High Pressure Double Pack Stuffing Boxes with Flapper Valve (W-HPSBF) The W-HPSBF Double Pack Stuffing Box with integral flapper valve is designed to reduce cost while increasing productivity. It is a self-contained, low profile, all steel unit, designed to operate at pressures up to 5M psi.
25 Lube Gland Cap Cone Packing Upper Lube Gland Lower Lube Gland Cost effective Standard in oil and gas industry; fits most applications Low profile Features up to a 3 flex reducing the need for exact alignment with pumping unit 1.5M psi working pressure Ductile material Cone Packing Single Pack Base Available in various thread and packing size combinations Can be used in conjunction with a W-plug for improved performance Seaboard Stuffing Box (W-SB) Redirects the fluid and gas into the flow line by sealing off the well Bottom Connection Cone Packing Sizes WP Material 2 3/8 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 in. 11 1/2V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 7/8 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 1/2 in. 11 1/2V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 1/2 in. 8V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 3 1/2 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 3 1/2 in. 8V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile Pieces of Split Cones Required Amount Top Cones 4 Bottom Cones 1
26 Cap Cone Packing Upper Gland Lower Gland Cone Packing Set Follower SBT Base Cost effective solution 1.5M psi working presure Ductile material Available in various thread and packing size combinations Can be used in conjunction with a W-plug for improved performance T-base eliminates one connection, reducing potential leak point Seaboard Tee Based Stuffing Box (W-SBT) Redirects the fluid and gas into the flow line by sealing off the well Bottom X Side Connection Cone Packing Sizes WP Material 2 3/8 in. EUE 8rd X 2 in. LPO 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 7/8 in. EUE 8rd X 2 in. LPO 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 7/8 in. EUE 8rd X 3 in. LPO 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 3 1/2 in. EUE 8rd X 3 in. LPO 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile Pieces of Split Cones Required Amount Top Cones 4 Bottom Cones 1 *Note: Corrosion resistant coatings available contact Customer Service
27 Inverted Gland Cap Cone Packing Set Superior packing contact with polished rod Self energized inverted packing on the Polished Rod seal protects against pressure spikes Cost effective For improved performance, use in conjunction with W-plug Inverted Ring Available in various thread and packing size combinations WIVSB Base Seaboard Inverted Stuffing Box (W-IVSB) Redirects the fluid and gas into the flow line by sealing off the well Bottom Connection Cone Packing Size WP Material 2 3/8 in. EUE 8rd Male 1 in., 1 1/8in., 1 1/4 in., 1 5/16in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 in. 11 1/2V Male 1 in., 1 1/8in., 1 1/4 in., 1 5/16in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 7/8 in. EUE 8rd Male 1 in., 1 1/8in., 1 1/4 in., 1 5/16in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 1/2 in. 11 1/2V Male 1 in., 1 1/8in., 1 1/4 in., 1 5/16in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 1/2 in. 8V Male 1 in., 1 1/8in., 1 1/4 in., 1 5/16in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 3 1/2 in. EUE 8rd Male 1 in., 1 1/8in., 1 1/4 in., 1 5/16in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 3 1/2 in. 8V Male 1 in., 1 1/8in., 1 1/4 in., 1 5/16in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile Pieces of Split Cones Required Amount Top Cones 3 Bottom Cones 1 Note: Corrosion resistant coatings available contact Customer Service
28 Imported Gland Cap Cone Packing Set Inverted Ring Follower WIVSBT Base Low Profile Pressure Energized Seal Superior packing contact with the Polished Rod For improved performance, use in conjunction with W-plug 1.5M psi working pressure Ductile Material Reciprocating pump Extremely low profile wells Seaboard Inverted Tee Based Stuffing Box (W-IVSBT) Redirects the fluid and gas into the flow line by sealing off the well Bottom X Side Connection Split Cone Packing WP Material 2 3/8 in. EUE 8rd X 2 in. LPO 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 7/8 in. EUE 8rd X 2 in. LPO 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 7/8 in. EUE 8rd X 3 in. LPO 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 3 1/2 in. EUE 8rd X 3 in. LPO 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile Pieces of Split Cones Required Amount Top Cones 3 Bottom Cones 1 Note: Corrosion resistant coatings available contact Customer Service
29 Available in various thread and packing size combinations 1.5M psi working pressure Ductile material Seaboard Big Shot (W-BS) Stuffing Box Redirects the fluid and gas into the flow line by sealing off the well Designed to reduce costly packing maintenance time Packing compression forces are distributed evenly around polished rod Low profile design for stroke length limitations Reciprocating Rod pump with threaded cap Ability to be used in height restricted applications (Big Shot is 10 in. tall) Can be used in conjunction with a W-plug for improved performance Easy to adjust threaded cap no bolts to tighten Cap protects packing from weight of rod string Standard brass inverter ring is designed to reduce polished rod scarring Bottom Connection Cone Packing Size 2 3/8 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 2 in. LPO 11 1/2V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 2 7/8 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 2 1/2 in. LPO 11 1/2V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 2 1/2 in. LPO 8V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 3 1/2 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 3 in. LPO 8V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. Pieces of Split Cones Required Amount Top Cones 3 Bottom Cones 1 Note: Corrosion resistant coatings available - contact Customer Serivce
30 Available in various thread and packing size combinations 1.5M psi working pressure Ductile material Designed to reduce costly packing maintenance time Packing compression forces are distributed evenly around polished rod Low profile design for stroke length limitations Can be used in conjunction with a W-plug for improved performance Seaboard W-Big Shot Tee Based (W-BST) Stuffing Box Redirects the fluid and gas into the flow line by sealing off the well Easy to adjust threaded cap no bolts to tighten Cap protects packing from weight of rod string Standard brass inverter ring designed to reduce polished rod scarring Bottom X Side Connection Split Cone Packing 2 3/8 in. EUE 8rd X 2 in. LPO 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 2 3/8 in. EUE 8rd PIN X 2 in. LPO 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 2 7/8 in. EUE 8rd X 3 in. LPO 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 2 7/8 in. EUE 8rd PIN X 3 in. LPO 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. PIECES OF SPLIT CONES REQUIRED AMOUNT TOP CONES 5 BOTTOM CONES 1 Note: Corrosion resistant coatings available - contact Customer Service
31 Lube Gland Upper Lube Lower Lube Cone Packing Set Compression Bolts Double Pack Body Compression Ring Cone Packing Double Pack Base Designed to reduce costly packing maintenance time 1.5M psi working pressure Ductile material Double packing enables primary packing to be changed under pressure Can be used in conjunction with a W-plug for improved performance When properly installed, features a 3 flex reducing the need for exact alignment with pumping unit. Seaboard Double Pack Stuffing Box (W-DPSB) Redirects the fluid and gas into the flow line by sealing off the well Bottom X Side Connection Split Cone Packing 2 3/8 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 2 in. 11 1/2V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 2 7/8 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 2 1/2 in. 11 1/2V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 2 1/2 in. 8V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 3 1/2 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 3 1/2 in. 8V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. Pieces of Split Cones Required Amount Top Cones 6 Bottom Cones 1
32 Inverted Gland Cap Cone Packing Set Inverted Ring Compression Bolt WIVDPSB Body Compression Ring Cone Packing WIVDPSB Base Double Packing allows primary packing to be changed under pressure Self energized inverted packing on the Polished Rod seal protects against pressure spikes Superior Packing contact with Polished Rod Improved performance possible when used in conjunction with the W-plug 1.5M psi working pressure Ductile material Available in various thread and packing size combinations Seaboard Inverted Double Pack Stuffing Box (W-IVDPSB) Redirects the fluid and gas into the flow line by sealing off the well Bottom Connection Cone Packing Sizes WP Material 2 3/8 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 in. 11 1/2V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 7/8 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 1/2 in. 11 1/2V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 1/2 in. 8V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in, 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 3 1/2 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 3 1/2 in. 8V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile Pieces of Split Cones Required Amount Top Cones 5 Bottom Cones 1 Note: Corrosion resistant coatings available - contact Customer Service
33 Seaboard Big Shot Double Pack (W-BSDP) Stuffing Box Redirects the fluid and gas into the flow line by sealing off the well Available in various thread and packing size combinations 1.5M psi working pressure Ductile material Designed to reduce costly packing maintenance time Packing compression forces are distributed evenly around polished rod Low profile design for stroke length limitations Reciprocating Rod pump with threaded cap Ability to be used in several applications with height restrictions (Big Shot Double Pack is 15 in. tall) Can be used in conjunction with a W-plug for improved performance Easy to adjust threaded cap no bolts to tighten Cap protects packing from weight of rod string Standard brass inverter ring designed to reduce polished rod scarring Bottom Connection Cone Packing Size WP Material 2 3/8 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 in. LPO 11 1/2V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 7/8 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 1/2 in. LPO 11 1/2V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 1/2 in. LPO 8V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 3 1/2 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 3 in. LPO 8V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile Pieces of Split Cones Required Amount Top Cones 5 Bottom Cones 1 Note: Corrosion resistant coatings avaliable contact Customer Service
34 Two independently adjustable packing chambers Base has a 1/2 in. NPT test port Unique misaligning feature reduces need for exact alignment with the pumping unit 1.5M psi working pressure maximum Maximum operating temperature: 350 F Pollution Control Adapter acceptable to -50 F Ductile material Adaptable to Environmental Control Adapter (ECA) Can be used in conjunction with a W-plug for improved performance Seaboard Pollution Controlled Double Pack Stuffing Box (W-PCDP) Redirects the fluid and gas into the flow line by sealing off the well Promotes clean and environmentally sound well site hookup Packing can be changed under pressure Features up to a 3 flex reducing the need for exact alignment with pumping unit Flapper closes automatically if Polished Rod breaks Bottom Connection Cone Packing Size WP Material 2 3/8 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 2 7/8 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 3 1/2 in. EUE 8rd Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile 3 in. LP 8V Male 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 3/8 in., 1 1/2 in., 1 3/4 in. 1.5M psi Ductile Pieces of Split Cones Required Amount Top Cones 5 Bottom Cones 1
35 CP Style (not shown) Max temperature: 650 O F (345 O C) Max burst temperature: 1000 o F (540 O C) Max 30% H 2 S CP Style QT Style Temperature: 500 O F Reciprocating: 1.5M psi (80 bar) Shaft Speed: 2.8M fpm (14 m/s) V-Packing Material composition includes Nitrile elastomer and cotton fabric specifically formulated to be compatible with oil and gas applications Temperature capability: - 20 O F (-29 O C) to 250 O F (121 O C) QT Style V-Packing 5M Stuffing Box Packing Options CP Style Engineered for high H 2 S content wells with long stroke and fast pumping. Specifically designed with a reinforced sealing surface for high abrasives. Considered to be the best extreme service packing in today s market place. QT Style A blend of high-performance Aramid and Fiberglass fibers are impregnated with PTFE, increasing chemical resistance. Its excellent properties and density help provide an extrusion resistant barrier designed to extend the life of the packing. The fiberglass conducts heat while the PTFE mitigates shaft wear. V-Packing Fluid seal rod packing incorporates the proven theory of lip-type action (sealing from pressure), with space provided between each ring designed to provide a perfect, non-binding fluid seal for lubrication of the rod. This packing requires no tightening. It performs best when run loose (finger-tight). Normal operating pressure expands the lip to compensate for wear until the packing is completely worn out.
36 Used in the Seaboard TM W-HPLUG, this V-style Nitrile compound is rated to 250 F (121 O C) This secondary packing seal is designed to help prevent costly environmental spills Environmentally friendly Seaboard V-Style Packing Used in the Seaboard W-HPLUG, this V-style Nitrile compound is rated to 250 F. This secondary packing seal is designed to help prevent costly environmental spills. V-Style Packing Rod Sizes: 1 in., 1 1/8 in., 1 1/4 in., 1 3/8 in., 1 5/16 in., 1 1/2 in., 1 3/4 in. Packing Sizes: 2 1/2 in. OD X 3 1/8 in. High Standard, HSN or Moly Filled Nylon
37 Sweet crude production with high oil to water ratios Low abrasive content Max temperature: 110 F (43 C) Max 2% H 2 S Normal conditions, standard Buna rubber Extended shelf life Seaboard BUNA (Soft) Cone Packing General Service Sweet crude production with high oil to water ratios and low abrasive content Sizes 1 in., 1 1/8 in., 1 1/4 in., 1 3/8 in., 1 5/16 in., 1 1/2 in., 1 3/4 in.
38 Engineered for high H 2 S wells with long stroke and fast pumping Specifically designed with reinforced sealing surface for high abrasives Max temperature: 650 F (345 C) Max burst temperature: 1000 F (540 C) Max 30% H 2 S Considered to be one of the best extreme service packings in today s market place. Extended shelf life Seagold HT (Kevlar Brass Filled) Cone Packing Specialty Service Engineered for high H 2 S wells with long stroke and fast pumping. Specifically designed with reinforced sealing surface for high abrasives. Sizes 1 in., 1 1/8 in., 1 1/4 in., 1 3/8 in., 1 5/16 in., 1 1/2 in., 1 3/4 in. Copyright 2014 Seaboard International, Inc. All rights reserved. SEABOARD and SEAGOLD are trademarks and/or registered trademarks of Seaboard International, Inc.; WEIR and WEIR (logo) are trademarks and/or
39 Well suited for higher gas to oil ratios than conventional general service packing Designed to withstand high concentrations of hydro carbons and increase production temperatures for extended periods of time Max temperature: 355 F (180 C) Max 8-10% H 2 S Higher tolerance to CO 2 concentrations Extended shelf life Seaboard HSN Cone Packing Specialty Service Well suited for higher gas to oil ratios than conventional general service packing. Designed to withstand high concentrations of hydro carbons, and increase production temperatures for extended periods of time. Sizes 1 in., 1 1/8 in., 1 1/4 in., 1 3/8 in., 1 5/16 in., 1 1/2 in., 1 3/4 in.
40 Built with PFTE rope packing to create an inner seal around the polished rod Designed to reduce heat & polished rod wear, and extend the life of the rubber cone housing Works well on worn polished rods, not recommended for scored polished rods Max temperature: 500 F (250 C) Max 5-8% H 2 S Reliable long life on pump Extended shelf life Seaboard PFTE Cone Packing Specialty Service The PFTE Cone Packing is built with PFTE rope packing to create an inner seal around the polished rod. It is designed to reduce heat & polished rod wear and extend the life of the rubber cone housing. It works well on worn rods but, is not recommended for scored polished rods. Sizes 1in., 1 1/8 in., 1 1/4 in., 1 3/8 in., 1 5/16 in., 1 1/2 in., 1 3/4 in.
41 Sweet crude production with long strokes and rapid pumping cycles Works well with gas locking wells when added lubrication is needed Max temperature: 110 F (43 C) Max 2% H 2 S Reduces friction and lowers temperatures Extended shelf life Seaboard PFTE Filled Cone Packing Cone Packing - General Service PFTE Filled Cone Packing has sweet crude production with long strokes and rapid pumping cycles. It works well with gas locking wells when added lubrication is needed. Sizes 1 in., 1 1/8 in., 1 1/4 in., 1 3/8 in., 1 5/16 in., 1 1/2 in., 1 3/4 in.
42 for low gas to oil ratio, and high water cut wells This packing has a high tensile strength at 2M psi Red: 1.5M psi, Green: 2M psi Max Temperature: 400 F (200 C) Max 15% H 2 S Reliable, long life on pump for end users Extended shelf life Seaboard High Tensile Cone Packing Specialty Service Sizes 1 in., 1 1/8 in., 1 1/4 in., 1 3/8 in., 1 5/16 in., 1 1/2 in., 1 3/4 in.
43 Recommended for wells pumping off or not on a timer Sweet crude production with high oil to water ratios Low abrasive content Max temperature: 110 F (43 C) Max 2% H 2 S Reduces polished rod squealing, with added wax lubrication Extended shelf life Seaboard Soft-Lubricated Cone Packing General Service Recommended for wells pumping off or not on a timer. Sweet crude production with high oil to water ratios. Low abrasive content. Sizes 1 in., 1 1/8 in., 1 1/4 in., 1 3/8 in., 1 5/16 in., 1 1/2 in., 1 3/4 in.
44 Best suited for wells producing medium to heavy oil Handles moderate produced heat along with higher than average friction heat Can be used with moderate abrasives when additional lubrication is not required Max temperature: 130 F (70 C) Max 5% H 2 S Sweet to moderate sour crude production with high oil to water ratios Reduces deposit buildup and dissipates heat Seagold (Brass Filled) Cone Packing General Service Brass Filled Cone Packing is best suited for wells producing medium to heavy oil API. Handles moderate produced heat along with higher than average friction heat and can be used with light to moderate abrasives when additional lubrication is not required. Composite brass impregnated rubber helps dissipate friction heat, while maintaining rubber integrity Acts as a cleaner scraping residual oil away from the turn around. Extended shelf life Sizes 1 in., 1 1/8 in., 1 1/4 in., 1 3/8 in., 1 5/16 in., 1 1/2 in., 1 3/4 in. Copyright 2014 Seaboard International, Inc. All rights reserved. SEABOARD and SEAGOLD are trademarks and/or registered trademarks of Seaboard International, Inc.; WEIR and WEIR (logo) are trademarks and/or
45 Meets NEC Class 1, Div. 1 requirements 2 connections for assembly Long travel float Both Normally Open and Closed contacts Corrosion resistant components Used in conjunction with Seaboard TM W-H Plug Reduces spills due to leakage Seaboard Environmental Control Adapter (ECA) Adaptable to any W - Series Stuffing Box Container Stainless Steel Plastic (Not Shown) Switch Explosion Proof Standard
46 Provides a secondary seal Uses V-Style packing Fits any Seaboard TM W-series stuffing box Promotes clean and environmentally sound well site hookup Seaboard High Pressure Lube Upper Gland (W-HPLUG) Upper Secondary Seal High Pressure Lube Upper Gland (W-HPlug) Rod Sizes: 1 in., 1 1/8 in., 1 1/4 in., 1 3/8 in., 1 5/16 in., 1 1/2 in., 1 3/4 in.
47 Standard on Seaboard TM models Zerk fitting for maintenance Ductile iron material Designed to extend packing life and reduce maintenance cost Top split cone balances oil film on the Polished Rod Seaboard Lube Upper Gland (W-LUG) Upper Lubricating Gland Lube Upper Gland (W-Lug) Rod Sizes: 1 in., 1 1/8 in., 1 1/4 in., 1 3/8 in., 1 5/16 in., 1 1/2 in., 1 3/4 in.
48 Available in standard rod sizes Features 4140 heat treated steel hinge pins Phosphate coated Steel body material 9 in. rotating diameter Cost effective W-25 Series W-40 Series Reliable Seaboard Polished Rod Clamps Friction type clamp Specifications W-25 Series W-40 Series Rated Load 25,000 lb 40,000 lb Polished Rod Size 1 1/8 in., 1 1/4 in., 1 1/2 in. 1 1/8 in., 1 1/4 in., 1 1/2 in. Recommended Min / Max Bolt Torque 250/300 ft-lbf 500/550 ft-lbf Weight 10.5 lb 25 lb Height 4 1/8 in. 6 3/4 in.
49 Individually hinged Available in standard rod sizes Features heat treated 4140 steel hinge pins Phosphate coated Steel Body Material Rotating Diameter 5 3/4 in. Can be individually torqued Compact design W-10S SERIES W-10D SERIES W-10T SERIES Reduced size with no decrease in weight load capacity Seaboard Polished Rod Clamps Indention type clamps W-10S Series 1 Bolt Specifications W-10D Series 2 Bolt W-10T Series 3 Bolt Rated Load 13,000 lb 26,000 lb 40,000 lb Polished Rod Size 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 1/2 in. 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 1/2 in. 1 in., 1 1/8 in., 1 1/4 in., 1 5/16 in., 1 1/2 in. Weight 3.75 lb 7.5 lb lb Height 2 1/2 in. 5 in. 7 1/2 in. Recommended Min/Max Bolt Torque 225/250 ft-lbf
50 Provides convenient Polished Rod lubrication Easy installation. Use with any style of stuffing box Lubrication extends stuffing box packing life Uses replaceable felt wicks Available for all Polished Rod sizes 5 1/2 in. height Single completion Designed to prevent premature packing failure due to lack of lubrication on the Polished Rod Seaboard Polished Rod Lubricator Rod Lubricator with Wicks For use in heavy water to oil well applications Applies when the unit first begins rotation The Polished Rod Lubricator is easily installed and can be used with any style of stuffing box. Lubrication extends stuffing box packing life and the lubricator uses replaceable felt wicks. Available for all polished rod sizes. Sizes Sizes: 1 1/8 in., 1 1/4 in., 1 3/8 in., 1 1/2 in., 1 3/4 in.
51 When Used WITH A Rod Rotator Can be installed under the Rod Rotator or under the Polished Rod Clamp if Rod Rotators aren t used Available in most common Polished Rod sizes Designed to ensure uniform engagement between the Polished Rod Clamp and the carrier bar Designed to help minimize Polished Rod breaks When Used WITHOUT A Rod Rotator Seaboard Leveling Plates The use of leveling plates can help compensate for misalignment of the carrier bar of up to 2 in any direction. Sizes 1 1/8 in., 1 1/4 in., 1 3/8 in., 1 1/2 in., 1 3/4 in.
52 Slow gear allows rod gear torque to easily disperse downhole Ductile body material Helical gear rotation Polished Rod sizes 1 1/8 in. to 1 1/4 in. W-164 W-302 W-252 W-302SG Seaboard Rod Rotators Rod rotation is one of the most effective means of reducing rod coupling and tubing wear, especially when used in conjunction with rod guides. Seaboard rod rotators are available in maximum recommended loads ranging from 13,000 40,000 lbs. Specifications W-164 W-252 W-302 W-302SG Max. Recommended Load (lb) 13,000 33,000 40,000 40,000 Required Bridal Clearance Width (in.) Polished Rod Sizes 1 1/8 in. to 1 1/4 in. 1 1/8 in. to 1 1/2 in. 1 1/8 in. to 1 3/4 in. 1 1/8 in. to 1 3/4 in. Height (in.) 4 1/4 5 1/2 6 1/2 6 1/2 Weight (lb) Standard Actuator Cable Length (ft.) Lever Pull Per Revolution Patent Pending - New & Improved Ratchet Pawl design on the W-164, W-302 & W-302SG
5k Slickline Lightweight Pressure Control Equipment 4 ID
5k Slickline Lightweight Pressure Control Equipment 4 ID Table of Contents 5k Slickline Lightweight Pressure Control Equipment 4 ID... 1 Hydraulic Slickline Stuffing Box... 3 Wireline Lubricators... 4
More informationHEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The (SER.22) model knife gate is a bi-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The completely new
More informationHomestead Series 820 AWWA Butterfly Valves
Homestead Series 820 AWWA Butterfly Valves Dependable Valves for Water & Wastewater Service BODY: The ductile iron body meets or exceeds the design strength requirements of the AWWA C504 standards. Flange
More informationInflatable Packer Single & Double. Single & Double Packer Dimension. Wireline Packer. Water Testing Packer (WTP) Packer
Inflatable Packer Single & Double Single & Double Packer Dimension Wireline Packer Water Testing Packer (WTP) Packer Packer Working Pressure & Depth Chart Packer Water Hand Pump Packer Air Driven Pump
More informationOn-Off Connector Skirt
On-Off Connector Skirt Retrievable Packers & Accessories The On-Off Connector Skirt is compact, reliable, fully sealing, J-type tubing disconnect device that automatically engages and releases with a small
More informationCameron MBS Multi-Bowl Wellhead System
Cameron MBS Multi-Bowl Wellhead System MBS Multi-Bowl Wellhead System Tubing Head Adapter Tubing Hanger Upper Casing Spool Pack-off Bushing Emergency Slip and Seal Assembly Lower Casing Head Standard MBS
More informationFord Service Saddles and Tapping Sleeves
Section AA 5/2001 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487
More informationPolished Rod Clamp Rod Rotator. Stuffing Box. Pumping Tee Rod BOP. Wellhead Systems Inc. Pumping and Polished Rod Accessories. Rev.
Polished Rod Clamp Rod Rotator Stuffing Box Pumping Tee Rod BOP Wellhead Systems Inc. Pumping and Polished Rod Accessories Rev. B WSI Difference Wellhead Systems Incorporated (WSI) products have been recognized
More informationSPE Coiled Tubing in High-pressure Wells. Well Control Considerations. Introduction
Society of Petroleum Engineers SPE 24793 Coiled Tubing in High-pressure Wells K.R. Newman and M.G. Allcorn, Dowel1 Schlumberger SPE Members Copyright 1992, Society of Petroleum Engineers Inc. This paper
More informationSubsea Safety Systems
Subsea Safety Systems The ELSA-HP has been developed to service the high pressure horizontal tree completion and intervention market. With systems designed and qualified up to 15,000 psi, 250 degf and
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationDB Bridge Plug. Features. Benefits. Applications
DB Bridge Plug The WELLFIRST Premium Cast Iron Bridge Plug designed to run on electric line. Rated between 2000-10000-psi differential, and 300 F from above and below. Features Field Proven Design Constructed
More informationBray/ VAAS O-Ported Series Knife Gate Valve 770/780 Series Operation and Maintenance Manual
Bray/ VAAS Knife Gate Valve 770/780 Series Operations and Maintenance Manual Table of Contents Definition of Terms 1 Safety Instructions 1 Introduction 2 Unpacking 2 Storage 2 Installation 2 Commissioning
More informationSpecifications For Threaded and Butt Weld Hammer Unions
.02 Introduction Pacific Hoseflex offers a comprehensive range of standard and sour gas. Each union is thoroughly inspected to ensure long, dependable service in the most extreme conditions. - Three lug
More informationAir Operated Hydraulic Pumping Systems to 50,000 psi
High Pressure Equipment Air Operated Hydraulic Pumping Systems to 50,000 psi PS-10: 10,000 psi PS-20: 20,000 psi PS-30: 30,000 psi PS-40: 40,000 psi PS-50: 50,000 psi PS-90: 90,000 psi High Pressure air
More informationTECHNICAL DATA. Q = C v P S
Page 1 of 13 1. DESCRIPTION The Viking 6 Model G-6000 Dry Valve Riser Assembly consists of a small profile, light weight, pilot operated valve that is used to separate the water supply from the dry sprinkler
More informationINSTALLATION & MAINTENANCE INSTRUCTIONS - ORIGINAL VERSION AVK KNIFE GATE VALVES
1. INTRODUCTION The AVK knife gate valve is a unique, patented, bi-directional on-off valve that ensures a bubble-tight shut off. The valve is available with body of ductile iron and seat of nitrile, viton,
More information4400 TwinHybrid Gas Seal
4400 TwinHybrid Gas Seal EQUIPMENT PREPARATION MECHANICAL SEAL INSTALLATION INSTRUCTIONS 1 2 200.005" 0,13 mm 125 µ" 3,2 µm R a 3 4 32 µ" 0,8 µm R a 1000 ±.002" 0,05mm CAUTIONS These instructions are general
More informationAWWA C504 COMPLIANT VALVES FROM 3 THRU 108
AWWA C504 COMPLIANT VALVES FROM 3 THRU 108 PO Box 411 Berwick PA 18603 800-247-VALV www.crispinvalve.com 500 SERIES: Sizes 3-20 Available The K-Flo 500 Series is a heavy-duty resilient seated butterfly
More informationTECHNICAL DATA 3 MODEL G-3000 DRY VALVE RISER ASSEMBLY
Page 1 of 13 1. DESCRIPTION The Viking 3 Model G-3000 Dry Valve Riser Assembly is equipped with a small profile, light weight, pilot operated valve that is used to separate the water supply from the dry
More informationTorque Specifications
SENR3130-10 Torque Specifications All Caterpillar Products S/N From the library of Barrington Diesel Club CONTENT General Information 01/07/2005 Introduction to Torque 01/07/2005 Torque-Turn 01/07/2005
More informationshutoff valves 900 Series psig Manual Shutoff Valves
0 6000 psig Manual Shutoff Valves Features Zero leakage Protected o-ring Full flow passages Freedom from wire drawing Panel mount standard Hand wheel or toggle handle How it Works Closed O-ring seal on
More informationTECHNICAL DATA Q = C. v P S. 2 Model G-2000 Dry valve. Page 1 of 13
Page 1 of 13 1. Description The Viking 2 Model G-2000 Dry Valve Riser Assembly consists of a small profile, light weight, pilot operated valve that is used to separate the water supply from the dry sprinkler
More informationManual Actuated Boiler Blowdown Valves
Manual Actuated Boiler Blowdown Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Operation 5. Maintenance 6. Spare parts p.1 1. Safety
More informationBall valve HKSF-W100. Ball valve HKSF-W100. RMA Kehl GmbH & Co. KG Oststrasse 17 D Kehl / Germany
Ball valve HKSF-W100 RMA Kehl GmbH & Co. KG Oststrasse 17 D-77694 Kehl / Germany info@rma-kehl.de www.rma-armaturen.de 1 Design Features: RMA-ball valves type HKSF-W are fully welded and completely maintenance-free
More informationInstallation Instructions, Pressure Regulator Series
Installation Instructions, Pressure Regulator 20517 Series Manual Model: 20517, L20517 Air motor Operated: F20517, LF20517 Hydraulic Motor Operated: G20517, LG20517 1. GENERAL ------------------------------------------------------------------------------
More informationTECHNICAL DATA. Q= Cv S
Page 1 of 13 1. DESCRIPTION The Viking 4 inch Model G-4000 Dry Valve Riser Assembly consists of a small profile, light weight, pilot operated valve that is used to separate the water supply from the dry
More informationINTERLOCKED METAL HOSE
INTERLOCKED METAL HOSE HOSE FUNDAMENTALS Penflex interlocked metal hoses are made for a variety of specialized industrial applications and are available in a wide range of metals, styles and sizes. Interlocked
More informationPANACEA P200 STAINLESS STEEL USER MANUAL
Basic Features Stainless Steel body with 1.75 outside diameter. Will fit into wells down to 2 (schedule 80). Has an internal chamber volume of 200mL. Maximum depth below ground surface of 3000ft. Other
More information1.0 - OPENING AND CLOSING THE DOOR
The purpose of this manual is to provide the user with instructions on how to safely open and close, how to conduct routine maintenance, and how to install the PEI TWINLOCK Closure on a pressure vessel.
More informationTECHNICAL DATA. Q = C v P S
January 6, 2012 Preaction 348a 1. Description Viking supervised Surefire Preaction Systems utilize the Viking G-6000P Valve. The small profile, lightweight, pilot operated Viking G-6000P Valve comes complete
More informationHydraulic Punch Drivers
INSTRUCTION MANUAL 7804SB / 7806SB Quick Draw 7704SB / 7706SB Quick Draw Flex 7904SB / 7906SB Quick Draw 90 Quick Draw Hydraulic Punch Drivers Serial Codes AHJ, YZ, and ZA Read and understand all of the
More informationCAST IRON VALVES FLOAT VALVE
CAST IRON VALVES FLOAT VALVE NETAFIM CAST IRON VALVES FLOAT VALVE INLINE 25-400MM ANGLE 50-100MM SPECIFICATIONS Manufactured to ISO 9001 Available Valve sizes INLINE Flanged 50mm to 600mm & Threaded 19mm
More informationROTATING DISK VALVES INSTALLATION AND MAINTENANCE 1. SCOPE 3 2. INFORMATION ON USAGE 3 3. VALVE TYPES 3 4. OPERATORS 5 5. VALVE CONSTRUCTION 6
Sub Section INDEX Page Number 1. SCOPE 3 2. INFORMATION ON USAGE 3 3. VALVE TYPES 3 4. OPERATORS 5 5. VALVE CONSTRUCTION 6 6. INSTALLATION AND OPERATION 6 7. MAINTENANCE 8 8. REPAIR 9 9. ASSEMBLY 10 10.
More informationMUELLER. A A Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3.
Installation Instructions manual MUELLER table of contents PAGE A-20806 A-20807 Adjustable General Information 2 Technical Data 3 Dimensions 4 Installation 5-6 Parts 7 Maintenance 8 Vertical Indicator
More informationAssembly Drawing: W-311B-A01, or as applicable Parts List: W-311B-A01-1, or as applicable Special Tools: , , &
REDQ Regulators Model 411B Barstock Design Powreactor Dome Regulator OPERATION AND MAINTENANCE Contents Scope..............................1 Installation..........................1 General Description....................1
More informationMUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5.
Installation Instructions manual MUELLER table of contents PAGE A-20814 Wall Type General Information 2 Technical Data/ Dimensions Installation 4-5 Maintenance 6 Parts 7 Indicator Post! WARNING: 1. Read
More informationTECHNICAL DATA. Q = C v P S
January 6, 2012 Preaction 333a 1. Description Viking supervised Surefire Preaction Systems Utilize the Viking G-3000P Valve. The small profile, lightweight, pilot-operated Viking G-3000P Valve comes complete
More informationInstallation, Operation and Maintenance Manual for Back Pressure Regulator
Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN
More informationSEries 29 Hydrant valves installation, operation & maintenance manual
Instruction for use Thank you for selecting an AVK product. With correct use, it will give long and reliable service. This manual has been prepared to assist you install, operate and maintain the valve
More informationGREIG FILTERS, INC. OPERATION MANUAL
GREIG FILTERS, INC. OPERATION MANUAL MODEL DCFH 3P 15/3 100 S4 DOE/222 DUAL CARTRIDGE FILTER HOUSING TABLE OF CONTENTS I. INTRODUCTION II. CARTRIDGE FILTER HOUSING UNIT A. OPERATION B. INSTALLATION C.
More informationContinental Industries TRANSITION FITTINGS or FAX Visit
Continental Industries TRANSITION FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
More informationMUELLER A A Non-Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3.
Installation Instructions manual MUELLER table of contents PAGE A-20808 General Information 2 Technical Data 3 Dimensions 4 A-20809 Non-Adjustable Installation 5-6 Parts 7 Maintenance 8 Vertical Indicator
More informationVERTICAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Tight Spaces UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
More informationPRESSURE REGULATORS UPSTREAM DIFFERENTIAL PRESSURE. APPLICATION: For maintaining a constant differential pressure across meter.
PRESSURE REGULATORS UPSTREAM DIFFERENTIAL PRESSURE APPLICATION: For maintaining a constant differential pressure across meter. PRESSURE RANGE: Steel: 10 psig to 300 psig CAPACITY: Refer to Table of Contents.
More informationAllspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW. Tel +44 (0)
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW Tel +44 (0)1254 615100 www.allspeeds.co.uk WIRE ROPE CUTTER WCS75HDZ PRODUCT CODE No. 980482 INSTRUCTIONS FOR
More informationWHEATLEY Series 822/820 Swing Check Valve
Document Number: TC003001-12 Revision: 02 WHEATLEY Series 822/820 Swing Check Valve Installation, Operation, and Maintenance Manual TABLE OF CONTENTS BILL OF MATERIALS...3 SCOPE...4 INSTALLATION AND OPERATION
More informationUTEX INDUSTRIES, INC.
UTEX INDUSTRIES, INC. C A R T R I D G E S E A L Externally located springs are virtually non-clogging Visible drive disc indicates face wear Setting clip removal unnecessary saving installation time Single-piece
More informationKTM OM-2 SPLIT BODY FLOATING BALL VALVES INSTALLATION AND MAINTENANCE INSTRUCTIONS
Before installation these instructions must be fully read and understood SECTION 1 - STORAGE 1.1 Preparation and preservation for storage All valves should be properly packed in order to protect the parts
More informationDean Pump Self-Priming Chemical Process Pumps
Bulletin C 1.2.34.7 Dean Pump Self-Priming Chemical Process Pumps php Series HEAD CAPACITY RANGE CHARTS php Self Primer - 2 Pole 3500 RPM 500 CAPACITY M 3 /HR 2900 RPM 50 HERTZ 25 50 75 125 150 400 TOTAL
More informationComponents for air preparation and pressure adjustment. OUT port position ( ) connected Rear side. of IN port. Air tank. directly.
Components preparation and pressure adjustment ABP Overview ABP is a component that enables boosting by s only up to twice primary pressure (.0MPa max.) in combination with using air tank but not using
More informationSABERINDO PACIF SABERINDO PACIFIC CIFIC SABERINDO PA. A Tyco International Company
CIF A Tyco International Company 1 Foam Concentrate CIF 3% AFFF -UL Listed -UL Canada Listed 6% AFFF 6 parts AFFF concentrate to 94 parts water -UL Listed- Foam Liquid -UL Canada Listed 3% FLUOROPROTEIN
More informationSECTION BUTTERFLY VALVES
SECTION 15112 BUTTERFLY VALVES PART 1 GENERAL 1.01 SUMMARY A. All butterfly valves shall be of the tight closing, rubber seated type and fully comply with the latest revision of AWWA Standard C504, Class
More informationLNY001 Float Ball Stuffing Box
LNY001 Float Ball Stuffing Box Table of Contents LNY001 Float Ball Stuffing Box... 1 Product Structure... 2 Product Components... 3 Improved Service Cycle... 6 Photos... 7 Testing Data... 11 LNY001 Float
More informationTECHNICAL DATA. Q = C v P S
Preaction 346a 1. Description The 6 Model G-6000P Electric Release Preaction System Riser Assembly can be used as a Single Interlock Preaction System with Electric Release, or as a Double Interlock Preaction
More informationCoiling Tube with Twist-Proof Fitting
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Anti-Twisting Coiling Tube for Air Tool Coiling Tube with Twist-Proof Fitting 306 Avoid Twisted Tube Problem
More informationWHEATLEY WHEATLEY SERIES 500 SWING CHECK VALVE. Installation, Operation and Maintenance Manual
WHEATLEY SERIES 500 SWING CHECK VALVE STANDARD INTEGRAL SEAT & OPTIONAL REMOVABLE SEAT 2" FP - 6" FP 150# - 1500# 8" FP - 12" FP 150# - 900# API 6D and B16.34 2" FP - 4" FP 5000# DRILLING PRODUCTION VALVE
More informationHORIZONTAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Low Ceilings UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
More informationInstallation, Operation, and Maintenance Manual
Industrial Process Installation, Operation, and Maintenance Manual Handwheel Operated Valves (970) Table of Contents Table of Contents Introduction and Safety...2 Safety message levels...2 User health
More informationBUTTERFLY VALVES Series 800
BUTTERFLY VALVES Series 800 WARNING Before proceeding read ALL instructions and become familiar with the equipment and associated drawings. Follow ALL applicable safety regulations and codes for pressurized
More informationMUELLER GAS. No-Blo Operations Using D-5. Drilling Machine. Reliable Connections. General Information 2
operating Instructions manual MUELLER GAS TAble of contents PAGE No-Blo Operations Using D-5 General Information 2 Installing No-Blo Service Tees, Service Stop Tees and Curb Stop Tees 3-8 Reconditioning
More informationMeter, PD Series H8-S1, S3, S5, S6, & S7 Parts List
Meter, PD Series H8-S1, S3, S5, S6, & S7 Parts List Issue/Rev. 0.0 (1/14) Bulletin PO01010 S1 S3, S5, S6, S7 The Most Trusted Name In Measurement Inner Mechanism Page 2 PO01010 Issue/Rev. 0.0 (1/14) Item
More informationThreaded Closures Installation, Operation & Maintenance
Howard Street Bulletin TT Louisville, KY 0 USA Revised Jan 0 Phone 0--0 Fax 0--00 Threaded Closures Installation, Operation & Maintenance Caution: Operating a closure can be a hazardous activity and certain
More informationInstallation Instructions
Installation Instructions TM Five Star Seal 80 Series Dual, Cartridge Mounted, Flexible Stator Pusher Seal Designed for General Service Applications 86 and 87 Experience In Motion Description The 86/87
More informationBERMAD Waterworks. Level Control Valve with Altitude Pilot. 700 Series. Model X. Features and Benefits. Major Additional Features
Level Control Valve with Altitude Pilot High level reservoirs & water towers Energy cost critical systems Systems with poor water quality Inherent refreshing Level sustaining at reservoir outlet The Level
More informationWHEATLEY Series 500 Swing Check Valve
Document Number: TC003001-13 Revision: 02 WHEATLEY Series 500 Swing Check Valve Installation, Operation, and Maintenance Manual TABLE OF CONTENTS BILL OF MATERIALS...3 SCOPE...5 INSTALLATION AND OPERATION
More informationKECKLEY. Installation, Operation, and Maintenance Manual. Style KGV - Knife Gate Valve
KECKLEY Installation, Operation, and Maintenance Manual Style KGV - Knife Gate Valve Table of Contents Introduction and Safety... 3 Safety message levels... 3 User health and safety... 3-4 Transportation
More informationB L A C K H A L L. larner-johnsonvalve presentation
larner-johnsonvalve presentation History! The Larner-Johnson valve was originally designed and developed in 1920 s for use on hydraelectric power plants in the U.S.A., where it pioneered the application
More informationHigh Pressure Equipment Taper Seal Valves, Fittings and Tubing
igh quipment Taper Seal Valves, ittings and Tubing 0,000 and,000 psi service igh quipment Company has developed the Taper Seal line of products to assure safe and easy plumbing through,000 psi. These needle
More informationOPERATING MANUAL DOUBLE ACTING DRILLING INTENSIFIER HYDRAULIC TYPE
Page 1 of 8 OPERATING MANUAL DOUBLE ACTING DRILLING INTENSIFIER HYDRAULIC TYPE Size Series 6.50" 478 Reviewed And Approved By: Signature: Initials: Date: Page 2 of 8 Section OPERATING MANUAL DOUBLE ACTING
More informationEngineering Data Sheet
Page 1 of 6 CE MARKING AND THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC Valves must be installed into a well designed system and it is recommended that the system be inspected in accordance with the appropriate
More informationApollo Standard Port, Full Port & One Piece Flanged Ball Valves Installation, Operation, & Maintenance Manual
I854000.D Apollo Standard Port, Full Port & One Piece Flanged Ball Valves Installation, Operation, & Maintenance Manual Introduction This manual presents guidelines for the Installation, Operation and
More informationUnit 1, Fullerton Road Rotherham S60 1DJ. Tele: Fax:
Unit 1, Fullerton Road Rotherham S60 1DJ Tele: 0845 601 333 6 Fax: 0845 601 333 7 info@fabricatedproducts.co.uk www.fabricatedproducts.co.uk Data Sheet 6.0 Rubber Pump Flexes All rubber bellows are suitable
More informationHEAVY DUTY PNEUMATIC
HEAVY DUTY PNEUMATIC Series A4 MEDIUM DUTY HYDRAULIC Series H4 PERMANENTLY LUBRICATED HEAVY DUTY PNEUMATIC Series L4 586.778.7680 SERIES A4/L4/H4 39 A4/L4/H4 FEATURES 1 1 9 9 12 8 7 5 12 3 13 4 10 2 11
More informationPneumatic Powered - Plunger Pumps
Models 42/62/82 D Series P.O. Box 80769 Lafayette, LA 70598-0769 (337) 235-9838 FAX (337) 235-9852 www.sidewinderpumps.com Pneumatic Powered - Plunger Pumps Suggested Installation & Operating Instructions
More informationTURBINE SEAL: AXIAL TYPE DESIGN
TURBINE SEAL: AXIAL TYPE DESIGN Our axial type seals are specifically designed for application to hydroelectric turbines and large water pumps for sewage handling, filtration, irrigation, and more. Our
More informationWELL COMPLETION & PROTECTION. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD
WELL COMPLETION & PROTECTION MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com WELL COMPLETION & PROTECTION TABLE OF CONTENTS TABLE OF CONTENTS (FLUSHMOUNTS)... 2-5 MONITORING
More informationHydraulic Punch Drivers
SERVICE MANUAL 7804SB / 7806SB Quick Draw 7704SB / 7706SB Quick Draw Flex Quick Draw Hydraulic Punch Drivers Serial Codes AHJ and YZ Read and understand all of the instructions and safety information in
More informationAVK SERIES 601, 602, 603 & 605 UNIVERSAL COUPLINGS, ADAPTORS & END CAPS INSTALLATION, OPERATION & MAINTENANCE MANUAL
Instruction for use Thank you for selecting an AVK product. With correct use, the product is guaranteed to deliver a long and reliable service. This manual has been prepared to assist you with the installation,
More informationEngineered solutions for complex pressure situations
SPECIAL SERVICES Engineered solutions for complex pressure situations Cudd Energy Services (CES) delivers custom engineered solutions to resolve complex pressure situations resulting from equipment failure
More informationModel MTB-ASME Horizontal Bladder Tanks
DATA SHEET Model MTB-ASME Horizontal Bladder Tanks Features n UL Listed and FM Approved for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure
More informationSuggested Installation & Operating Instructions for Sidewinder Pumps
Model 164 C P.O. Box 80769 Lafayette, LA 70598-0769 (337) 235-9838 FAX (337) 235-9852 www.sidewinderpumps.com Pneumatic Powered - Plunger Pump Suggested Installation & Operating Instructions for Sidewinder
More informationHydraulic Piston Accumulators
Hydraulic Installation All accumulators shipped from the factory will be pre-charged to a nominal pressure in order to seat the piston on the hydraulic cap. In this case the precharge will not be listed
More informationOperating instruction
Operating instruction MV, XV, HG, HP, RKO, D2G, TV, BV, WB & SLV 1 Introduction 2 2 Stafsjö s knife gate valves 2 3 Technical information 2 3.1 Pressure test 2 3.2 Labelling 2 4 Storage 3 5 Transportation
More informationHorizontal Bladder Tanks
DATA SHEET Horizontal Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationModel 1800 PFM Series Regulator. Technical Bulletin
Model 0 PFM Series Regulator Technical Bulletin Model 0 PFM Series Regulator 0 Elster American Meter The 0 PFM Series regulators are designed to control natural gas, air, nitrogen, carbon dioxide, propane
More informationSIMPLAIR PIPING TOOL. JXT Company
SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.
More informationMaterial Handling Hose
Novaflex 5000 Slurry King Hose Pure Gum Liner Tough, versatile alternative to inflexible, cumbersome steel tubing. The easy handling and reusable quick-fastening flange system make installation a snap.
More informationHPHT Annular Casing Packer. Obex Annular Casing Packer
HPHT Annular Casing Packer Obex Annular Casing Packer Industry Challenge Casing packer to support second stage cement Reduce hydrostatic pressure on formation Get cement to surface Annular gas migration
More informationOPERATING AND MAINTENANCE MANUAL
CONTENTS PAGE INTRODUCTION 1 Installation Compatibility 1 Required Tools and Materials 1 Preparing Valve and Flanges 1 1.0 INSTALLATION 2 1.1 INSTALLATION OF ALL 2- TO 12-IN. SPAN-TYPE VALVES 2 1.2 INSTALLATION
More informationWKM Model 320F Floating Ball Valve
Date: 4 WKM Model 320F Floating Ball Valve Installation, Operation, and Maintenance Manual 1 Date: 4 All the information contained in this manual is the exclusive property of Cameron. Any reproduction
More informationInstallation, Operation, and Maintenance Manual
Industrial Process Installation, Operation, and Maintenance Manual CF37 Conventional Knife Gate Valve Table of Contents Table of Contents Introduction and Safety...2 Safety message levels...2 User health
More informationTHE PROCESS OF JOINT INTEGRITY
BOLTED JOINTS A.333 THE PROCESS OF JOINT INTEGRITY To assist in managing a process, ask yourself the following questions: why, what, who, and how? Why do we need a Flange Joint Integrity program? This
More informationMUELLER. Mega-Lite Drilling Machine. Reliable Connections. table of contents PAGE. Equipment 2. Operating Instructions 3-4. Parts Information 5
operating Instructions manual MUELLER Mega-Lite Drilling Machine table of contents PAGE Equipment 2 Operating Instructions 3-4 Parts Information 5 Travel Charts 6-11! WARNING: 1. Read and follow instructions
More informationPANACEA P125 USER MANUAL
Basic Features Stainless steel body with 1.125 outside diameter. Will fit into wells down to 1-1/4 (schedule 80). Uses static water pressure to fill gas and sample return tubes. Maximum depth below ground
More information64 Series Pressure Reducing Regulators
Instruction Manual Form 1245 64 Series March 2006 64 Series Pressure Reducing Regulators W1943 Figure 1. 64 Series Regulator Introduction Scope of Manual This manual provides instructions for the installation,
More informationANDERSON GREENWOOD SERIES 9000 POSRV INSTALLATION AND MAINTENANCE INSTRUCTIONS
Procedure-assembly-functional test and performance requirements 1 SCOPE 1.1 This document establishes the general procedure for assembly, functional testing and normal performance requirements of low Series
More informationAquor House Hydrant V2
Aquor House Hydrant V2 IN-WALL OUTDOOR FAUCET SYSTEM FLUSH-MOUNT QUICK-CONNECT SELF-DRAINING ANTI-SIPHON NON-FREEZE VBH-SERIES AQUOR HOUSE HYDRANT V2: WALL HYDRANT / FREEZELESS SILLCOCK Freezeless sillcock
More informationCRP Ltd INSTALLATION, OPERATING AND MAINTENANCE INFORMATION FOR INLINE SYRINGE SAMPLING SYSTEMS
INSTALLATION, OPERATING AND MAINTENANCE INFORMATION FOR INLINE SYRINGE SAMPLING SYSTEMS Sampling Valves Installation, Operating & Maintenance Instructions SD IL 500 & SD IL 600 Inline sampling Valves This
More informationPlumbing Products FLOOR DRAIN CLEANOUT GATE VALVE BALL VALVE.
Plumbing Products FLOOR DRAIN CLEANOUT GATE VALVE BALL VALVE www.wilsontaylor.co INTRODUCTION Wilson Taylor Asia Pacific, headquartered in Singapore with a subsidiary based in Hong Kong and a representative
More information