WHOLESALE PRICING. GLASS THICKNESS 1/8" 3/16" 1/4" 3/8" 1/2" 1/4" Lami
|
|
- Alice Fletcher
- 5 years ago
- Views:
Transcription
1 WHOLESALE PRICING CUSTOM GLASS & MIRROR 1/4" Lami Clear $1.76 $2.44 $2.52 $5.05 $6.43 $6.60 Bronze Grey $4.00 $4.12 $5.00 Greylite 14/Midnight CALL Clear Mirror $3.16 $3.65 $3.65 Bronze or Grey Mirror CALL Misco Wire $15.75 Mirropane $15.00 Starphire Limited Availability N/A CALL CALL CALL ALL GLASS PRICES ARE PER SQUARE FOOT DIMENSIONS ARE CALCULATED TO THE NEXT EVEN INCH 1 SQ. FT. MINIMUM BILLING SIZE FOR 1/8" -1/4" PRODUCTS 2 SQ.FT. MINIMUM BILLING SIZE FOR 3/8" - 3/4' PRODUCTS ADD 2" TO EACH DIMENSIONS FOR PATTERN CUTTING FOR 1/8" - 1/4" ADD 4" TO EACH DIMENSIONS FOR PATTERN CUTTING FOR 3/8" - 3/4" CARDBOARD TEMPLATES OR CAD DRAWINGS REQUIRED FOR CURVED OR OUT OF SQUARE SHAPES AND ANY CUSTOM PATTERNS **$40.00 CHARGE TO TRANSFER PAPER PATTERNS TO CARDBOARD ADD 15% PREMIUM FOR OUT OF SQUARE CUTTING CUTTING TOLERANCE: STANDARD LEAD TIME: +/-1/16" FOR 1/8" - 1/4" THICKNESS +/- 1/8" FOR 3/8" -3/4" THICKNESS 3-5 WORKING DAYS FOR STRAIGHT EDGEWORK 5-10 WORKING DAYS FOR RADIUS EDGEWORK ALL PRICES INCLUDE LOOSE OR RETURNABLE RACK DELIVERY PAPER WRAPPING & CORNER PROTECTORS ARE AVAILABLE UPON REQUEST YOUR SALES CONTACT IS BETH SALLEE AT FAX
2 EDGE FABRICATION- STRAIGHT LINE SEAMED EDGE $0.04 $0.04 $0.04 $8.00 $0.12 FLAT POLISH $0.07 $0.07 $0.07 $0.15 $0.20 *PENCIL POLISH $0.40 $0.45 $0.50 1/2" BEVEL $0.14 $0.10 $0.10 $26.00 $0.31 3/4" BEVEL $0.20 $0.13 $0.13 $0.29 $0.34 1" BEVEL N/A $0.16 $0.16 $0.33 $ /4" BEVEL N/A $0.20 $0.20 $0.37 $ /2" BEVEL N/A N/A $0.27 $0.44 $ /4" BEVEL N/A N/A $0.95 $1.15 $1.20 2" BEVEL N/A N/A $0.95 $1.15 $1.20 *O.G. N/A N/A N/A N/A $2.50 FLAT POLISH 1/4" Lami $0.50 ADD 35% TO FABRICATON COST FOR 3-8 SIDED STRAIGHT LINE PATTERN *$10.00 SET UP CHARGE OF PENCIL POLISH EDGE FABRICATION - RADIUS EDGES SEAMED EDGE $0.04 $0.04 $0.04 $0.08 $0.12 FLAT POLISH N/A N/A $0.40 $0.45 $0.50 *PENCIL POLISH N/A $0.40 $0.40 $0.45 $0.50 1/2" BEVEL $0.85 $0.95 $0.95 $1.15 $1.25 3/4" BEVEL $1.00 $1.00 $1.00 $1.25 $1.35 1" BEVEL N/A $1.05 $1.05 $1.30 $ /4" BEVEL N/A $1.15 $1.15 $1.35 $ /2" BEVEL N/A N/A $1.40 $1.55 $1.65 O.G. N/A N/A N/A N/A $2.50 BUMP CORNER EDGE FABRICATION PRICES ARE PER LINEAL INCH, TO BE ADDED TO GLASS AND ANY OTHER APPLICABLE COSTS STRAIGHT LINE BEVELING IS $12. PER PIECE RADIUS BEVELING IS $30.00 PER PIECE STRAIGHT LINE POLISHING IS $6.50 PER PIECE SAFETY BACKING ADD $1.75 PER SQ FT MASONITE BACK /HOOKS ADD $30.00
3 FABRICATION PRICES PATTERN CHARGES ALL PER PIECE STRAIGHT LINE $9.00 $10.00 $10.00 $15.00 $25.00 CIRCLES $9.00 $12.00 $12.00 $15.00 $25.00 CURVED SHAPES $13.50 $18.00 $18.00 $25.00 $35.00 HOLES UP TO 1" HOLES $5.00 $5.00 $5.00 $10.00 $ "TO 3" HOLE $10.00 $10.00 $10.00 $15.00 $ " TO 5" HOLE $20.00 $25.00 $25.00 $40.00 $75.00 NOTCHES CORNER NOTCH $25.00 $25.00 $32.00 $32.00 EDGE NOTCH $30.00 $30.00 $40.00 $50.00 OUTLETS SINGLE OUTLET $17.25 $17.25 DOUBLE OUTLET $34.50 $34.50 TRIPLE OUTLET $50.00 $50.00 QUAD OUTLET $68.00 $68.00 CALL FOR PRICING ON INTERNAL CUTOUTS GROUND FINGER PULL $20.00 CALL FOR PRICING ON LAMI OVERSIZE CHARGE $22.00 PER PIECE 1/4" GLASS (23-34 SQ FT) 3/8" GLSS (15-20 SQ FT) 1/2" GLASS (11-15 SQ FT) 3/4" GLASS ( 7-10SQ FT ) CALL IF OVER THESE AMOUNTS
4 GROUND AND POLISHED GROOVES $12.00 SET UP CHARGE FOR SIMPLE ST LINE POLISH GROOVES CALL FOR SET UP CHARGE ON CURVED GROOVE 1/8 3/16 1/4 3/8 1/2 POLISH V-GROOVE ST N/A $0.30 $0.30 $0.30 $0.30 POLISH V-GROOVE PAT N/A $0.35 $0.35 $0.35 $0.35 MISCELLANEOUS SANDBLASTING- $4.50 PER SQ FT (3 SQ.FT. MIN) CLEARSHIELD - $4.50 PER SQ FT (5 SQ FT MIN) FORMULAS TO CALCUALTE LINEAL INCHES ARCH TOP = WIDTH X 1.5 <3" RADIUS CORNERS = SEEP PER CORNER PRICE >3" RADIUS CORNERS = RADIUS X 3.0 RACE TRACK OVALS = WIDTH X 3.5 CIRCLES = DIAMETER X 3.14 OVALS =( LENGTH + WIDTH) X 2 OCTAGONS (EQUILATERAL=(LENGTH + WIDTH) X 4 HEXAGON (EQUALATERAL) = (LENGTH + WIDTH) X 3.0 ALL OTHERS BASED ON ACTUAL MEASUREMENTS OF THE TEMPLATE QUOTES WILL BE HONORED FOR 60 DAYS
5 MILLWORK PRICING CUSTOM GLASS & MIRROR 1/4" Lami Clear $2.75 $3.75 $4.00 $7.60 $9.00 $8.00 Bronze Grey $6.00 $7.50 $7.50 Greylite 14/Midnight CALL Clear Mirror $4.75 $5.65 $5.65 Bronze or Grey Mirror CALL Misco Wire $18.50 Mirropane $22.50 Starphire Limited Availability N/A CALL CALL CALL ALL GLASS PRICES ARE PER SQUARE FOOT DIMENSIONS ARE CALCULATED TO THE NEXT EVEN INCH 1 SQ. FT. MINIMUM BILLING SIZE FOR 1/8" -1/4" PRODUCTS 2 SQ.FT. MINIMUM BILLING SIZE FOR 3/8" - 3/4' PRODUCTS ADD 2" TO EACH DIMENSIONS FOR PATTERN CUTTING FOR 1/8" - 1/4" ADD 4" TO EACH DIMENSIONS FOR PATTERN CUTTING FOR 3/8" - 3/4" CARDBOARD TEMPLATES OR CAD DRAWINGS REQUIRED FOR CURVED OR OUT OF SQUARE SHAPES AND ANY CUSTOM PATTERNS **$50.00 CHARGE TO TRANSFER PAPER PATTERNS TO CARDBOARD ADD 15% PREMIUM FOR OUT OF SQUARE CUTTING CUTTING TOLERANCE: STANDARD LEAD TIME: +/-1/16" FOR 1/8" - 1/4" THICKNESS +/- 1/8" FOR 3/8" -3/4" THICKNESS 3-5 WORKING DAYS FOR STRAIGHT EDGEWORK 5-10 WORKING DAYS FOR RADIUS EDGEWORK ALL PRICES INCLUDE LOOSE OR RETURNABLE RACK DELIVERY PAPER WRAPPING & CORNER PROTECTORS ARE AVAILABLE UPON REQUEST YOUR SALES CONTACT IS BETH SALLEE AT FAX
6 EDGE FABRICATION- STRAIGHT LINE SEAMED EDGE $0.05 $0.06 $0.06 $0.10 $0.14 FLAT POLISH $0.11 $0.11 $0.11 $0.23 $0.30 1/2" BEVEL $0.21 $0.15 $0.15 $0.39 $0.47 3/4" BEVEL $0.30 $0.20 $0.20 $0.44 $0.51 1" BEVEL N/A $0.24 $0.24 $0.50 $ /4" BEVEL N/A $0.30 $0.30 $0.56 $ /2" BEVEL N/A N/A $0.45 $0.75 $ /4" BEVEL N/A N/A $1.43 $1.73 $1.75 2" BEVEL N/A N/A $1.43 $1.73 $1.75 ADD 35% TO FABRICATON COST FOR 3-8 SIDED STRAIGHT LINE PATTERN $10.00 SET UP CHARGE FOR PENCIL POLISH 3/8" & 1/2" ONLY EDGE FABRICATION - RADIUS EDGES SEAMED EDGE $0.05 $0.06 $0.06 $0.12 $0.18 FLAT POLISH N/A $0.00 $0.60 $0.68 $0.75 *PENCIL POLISH N/A N/A $0.60 $0.68 $0.75 1/2" BEVEL $1.28 $1.43 $1.43 $1.73 $1.88 3/4" BEVEL $1.50 $1.50 $1.50 $1.88 $2.00 1" BEVEL N/A $0.60 $0.60 $0.80 $ /4" BEVEL N/A $0.65 $0.65 $0.85 $ /2" BEVEL N/A N/A $2.10 $2.33 $2.48 *O.G. N/A N/A N/A N/A $2.50 EDGE FABRICATION PRICES ARE PER LINEAL INCH, TO BE ADDED TO GLASS AND ANY OTHER APPLICABLE COSTS STRAIGHT LINE BEVELING IS $18. PER PIECE RADIUS BEVELING IS $36.00 PER PIECE STRAIGHT LINE POLISHING IS $8.00 PER PIECE SAFETY BACKING ADD $2.5PER SQ FT MASONITE BACK /HOOKS ADD $52.50
7 BUMP CORNER FABRICATION PRICES ALL PER PIECE STRAIGHT LINE $13.50 $15.00 $15.00 $22.50 $37.50 CIRCLES $8.00 $10.00 $10.00 $15.00 $30.00 CURVED SHAPES $10.00 $15.00 $15.00 $20.00 $35.00 UP TO 1" HOLES $7.50 $7.50 $7.50 $15.00 $ "TO 3" HOLE $12.00 $15.00 $15.00 $22.50 $ " TO 5" HOLE $30.00 $37.50 $37.50 $50.00 $90.00 CORNER NOTCH $37.50 $37.50 $45.00 $60.00 EDGE NOTCH $37.50 $37.50 $45.00 $60.00 SINGLE OUTLET $25.75 DOUBLE OUTLET $51.75 TRIPLE OUTLET $75.00 QUAD OUTLET $90.00 GROUND FINGER PULL $30.00 CALL FOR PRICING ON LAMI OVERSIZE CHARGE $30.00 PER PIECE 1/4" GLASS (22-34 SQ FT) 3/8" GLSS (15-20 SQ FT) 1/2" GLASS (11-15 SQ FT) CALL IF OVER THESE AMOUNTS GROUND AND POLISHED GROOVES $10.00 SET UP CHARGE FOR SIMPLE ST LINE POLISH GROOVES CALL FOR SET UP CHARGE ON CURVED GROOVE 1/8 3/16 1/4 3/8 1/2 POLISH V-GROOVE ST N/A $0.35 $0.35 $0.35 $0.35 POLISH V-GROOVE PAT N/A $0.40 $0.40 $0.45 $0.55
8 MISCELLANEOUS SANDBLASTING- $5.50 PER SQ FT (3 SQ.FT. MIN) CLEARSHIELD - $5.50 PER SQ FT (5 SQ FT MIN) FORMULAS TO CALCUALTE LINEAL INCHES ARCH TOP = WIDTH X 1.5 <3" RADIUS CORNERS = SEEP PER CORNER PRICE >3" RADIUS CORNERS = RADIUS X 3.0 RACE TRACK OVALS = WIDTH X 3.5 CIRCLES = DIAMETER X 3.14 OVALS =( LENGTH + WIDTH) X 1.7 OCTAGONS (EQUILATERAL=(LENGTH + WIDTH) X 4 HEXAGON (EQUALATERAL) = (LENGTH + WIDTH) X 3.0 ALL OTHERS BASED ON ACTUAL MEASUREMENTS OF THE TEMPLATE CARDBOARD PATTERNS OR CAD DRAWINGS REQUIRED QUOTES WILL BE HONORED FOR 60 DAYS
Perimeter. Name. 22 Topic 17. Reteaching Find the perimeter of the figure below.
Perimeter Reteaching 1-1 Find the perimeter of the figure below. 15 m x 4 ft 4 ft 2 ft y 2 ft 5 ft 6 m 20 ft Reteaching 1-1 By using a formula: There are two equal lengths and equal widths, so you can
More informationDazzling Dragons Play Magical Mini Golf
25 Putt-Putt Holes Putt-Putt Simpson s style: https://www.youtube.com/watch?v=iudkwvgdrag BLUE = Water hazard, not part of the area of the hole RED = Obstacle, part of the area of the hole = Tee box, part
More information- Written price quotations are valid for 30 days from the date of the quote unless otherwise noted.
SPECIFICATIONS - All material is solid brass with a #8 mirror finish unless otherwise noted. - All material sold by length is priced in one foot increments. ORDERING PROCEDURE - Use a Purchase Order number.
More informationPRICES FOR #40 PUNCHES & #82 DIES SEPTEMBER 1, 2018 PRICE LIST FIRST EDITION
PRICES FOR #40 PUNCHES & #82 DIES RETAIL PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE. All Prices Are F.O.B. Philip, South Dakota. Minimum Order $25.00 (Net). #40, #45, #49 & SPLIT RING PUNCHES & #82, #86,
More informationSprocket Selection Guidelines
Sprocket Selection Guidelines Table 1 Information Necessary to Order Sprockets 1. Chain Size Number, type, or drawing number of the chain to be used on the sprocket. (The suitability of a sprocket depends
More informationGRAND OPENINGS. By UDI, Inc. Manufacturers of Elliptical and Radius Cased Opening Jamb Systems
GRAND OPENINGS By UDI, Inc Manufacturers of Elliptical and Radius Cased Jamb Systems GRAND OPENINGS BY UDI, INC Manufacturers of Elliptical and Radius Cased Jamb Systems Table of Contents Steps to Ordering
More informationSPIRAL PIPE - OVAL SINGLE WALL
SPIRAL PIPE - OVAL SINGLE WALL Duct Direct Pipe and Fittings are manufactured in accordance with 2005 SMACNA Duct Construction Standards (1995 SMACNA Standards on request) OVAL SUBMITTAL Oval Single Wall
More informationGAR-BRO BUCKET LIFTING BAIL INSPECTION RECOMMENDATIONS G & R SERIES BUCKETS
GAR-BRO BUCKET LIFTING BAIL INSPECTION RECOMMENDATIONS G & R SERIES BUCKETS The following are recommendations regarding GAR-BRO bucket bail inspection and wear limits. The details which follow are for
More informationAdding Sculpted Toes to a Cloth Doll Foot
Adding Sculpted Toes to a Cloth Doll Foot by Sherralyn St. Clair, www.sherralynsdolls.com Many cloth doll patterns leave the doll's foot as a simple rounded shape. I have found that adding sculpted toes
More informationSwing Your Partner. by Beth Hester. GH Productions, Inc. The Basket Maker's Catalog
Swing Your Partner by Beth Hester GH Productions, Inc. The Basket Maker's Catalog Materials are available from your basketry supply store or contact: The Basket Maker's Catalog GH Productions, Inc. 521
More informationPOST TEST KEY. Math in a Cultural Context*
Fall 2007 POST TEST KEY Building a Fish Rack: Investigation into Proof, Properties, Perimeter and Area Math in a Cultural Context* UNIVERSITY OF ALASKA FAIRBANKS Student Name: POST TEST KEY Grade: Teacher:
More informationAnnex C Product Specifications Page 1 of 12
Annex C Product Specifications Page of PRODUCT SPECIFICATIONS TENDER FOR THE SUPPLY OF PLASTIC COVER FOR SERVICEWARE FOR PERIOD *0 DECEMBER 08 TO 0 NOVEMBER 00 TENDER REFERENCE NO TR 85 (*Estimated dates.
More informationWagner Die Supply W A G N E R P U N C H E S ONTARIO, CA TACOMA, WA DALLAS, TX ELMHURST, IL. Diemaking & Diecutting Source and Resource
W A G N E R P U N C H E S www.wagnerdiesupply.com ONTARIO, CA TACOMA, WA DALLAS, TX ELMHURST, IL America s Punch Experts - Since 1947. Since we opened our doors in 1947, Wagner has focused on providing
More informationRectangular (RPS) Square (SPS) Step Cut (SCP) Material SCP - Step Cut CI - Cast Iron
Ring Materials: Temp. Range 15% Glass filled PTFE -268 to 288 40% ronze filled PTFE -268 to 288 40% Glass Reinforced Nylon -240 to 149 15% Graphite Filled PTFE -72 to 232 15% Glass, 5% Moly Filled PTFE
More informationBuilding the Basic Cardboard Boat
Building the Basic Cardboard Boat By Kendall Hansen Supplies Needed: One (1) pencil, pen, marker, or writing tool. You will need one to mark lines on your cardboard. One (1) measuring tape to measure the
More informationSERIES E30 RAISED RIB
SERIES E30 RAISED RIB Eurobelt Series E30 Raised Rib conveyor belt has been designed mainly for making product transfers by using finger plates. Due to its smooth surface of projecting ribs, it is recommended
More informationBuild Your Own Tabletop Skatepark!
Page 1 Build Your Own Tabletop Skatepark! Dimensions for Fun Box Fingerboard Ramp Drawings and Instructions were created for Eccentric Racing Network by Karen Stewart 5th Grade teacher for the Jamul-Dulzura
More informationSTEP 3 GLASS FINISHES. Empire Floral Victorian Deco Tulip Tulip Border Traditional Roman Battuto Confetti Tebori Arabesque Palmier
RIMLESS UNDERMOUNT Color & Finish Guide 2.1.1 Color & Finish Guide for Items: 203, 213, 253, 263 Choose a combination of Glass Color and Glass Finish for this item using the table below. Please contact
More informationInstallation Guide Wall Mounted Angled Flagpole
Installation Guide 1.5m - 4m Angled Flagpole Dimensions Flagpole Dimensions Wall Bracket Dimensions 2m Aluminium 76mm Glassfibre 114.3mm angle from vertical 2000mm 250mm 300mm 1715mm Backplate thickness
More informationIEEE Southeastcon 2014 Student Hardware Competition Rules
IEEE Southeastcon 2014 Student Hardware Competition Rules I. Introduction In Kentucky, collegiate basketball is serious business and we d like to bring the thrill to you in a lighthearted competition.
More informationSERIES A24 RAISED RIB
SERIES A24 RAISED RIB Eurobelt Series A24 Raised Rib conveyor belt has been designed mainly to be used with finger plates. It has ribs that, sticking out 6 mm above the module, provide a greater resistance
More informationParking Lot HW? Joke of the Day: What do you call a leg that is perpendicular to a foot? Goals:
Parking Lot Joke of the Day: HW? What do you call a leg that is perpendicular to a foot? a right ankle Goals: Agenda 1 19 hw? Course Recommendations Simplify Radicals skill practice L8 2 Special Right
More information*Heart* Pom-pom rug. 1, 2, 3... go! Zweigart & Sawitzki GmbH & Co. KG Fronäckerstraße Sindelfingen. - more than 3 hours -
Pom-pom rug *Heart* - more than 3 hours - 1, 2, 3... go! Zweigart & Sawitzki GmbH & Co. KG Fronäckerstraße 50 71063 Sindelfingen Preparation: Arrange the material you need. The Zweigart Twist canvas (Item
More informationTOLL FREE: SIZING ( )
Headquarters 915 Oberlin Rd. SW P.O. Box 810 Massillon, OH 44648 Tel: 330-837-4203 Southern Facility 7560 Industrial Highway P.O. Box 10157 Macon, GA 31297 Tel: 478-781-8725 WWW.MIDWESTERNIND.COM TOLL
More informationdumont Minute Man Broaches
Catalog K dumont Minute Man Broaches Standard and Special Broaches Keyway Broaches and Sets Internal Hole and Surface Broaches The dumont Company, Greenfield, Massachusetts www.dumont.com The dumont Company
More informationF-1279-R UPPER RIGHT SKIN F-1280-R RIGHT SIDE SKIN F-1281-R LOWER RIGHT SKIN F-1208-R FUSELAGE FRAME
F-1282-R BOTTOM RIGHT SKIN F-1283C J-STIFFENER F-1278 TOP SKIN F-00009-L ADAHRS BRACKET F-00009-R ADAHRS BRACKET F-1279-R UPPER RIGHT SKIN F-1280-R RIGHT SIDE SKIN SECTION 10: TAILCONE F-1279-L UPPER LEFT
More informationdoor fittings >> Make any door look special with Croft fittings. Lever Furniture
17 door fittings >> Make any door look special with Croft fittings. 1 Lever Furniture Traditional, contemporary, or inspired from our heritage, Croft levers represent the highest quality British products.
More informationVolume Formula for a Cylinder
ACTIVITY 1.1 Volume Formula for a Analyze the prisms shown. Triangular Prism Rectangular Prism Pentagonal Prism Hexagonal Prism 1. What pattern do you see as the number of sides of the base increases?
More informationPlans and Instructions to build a folding reflector oven
Plans and Instructions to build a folding reflector oven Kayak2go.com also has folding kayak plans available for purchase. The low cost and ease of construction make the folding kayaks a great youth group
More informationDesign of a Solid Wall Transonic Wind Tunnel
Design of a Solid Wall Transonic Wind Tunnel David Wall * Auburn University, Auburn, Alabama, 36849 A solid wall transonic wind tunnel was designed with optical access from three sides to allow for flow
More informationRule 1.01 to Objectives of the Game.
Rule 1.01 to 1.04 1.00 Objectives of the Game. 1.01 Baseball is a game between two teams of nine players each, under direction of a manager, played on an enclosed field in accordance with these rules,
More information3 THE ARENA 3.1 OVERVIEW Dimensions and Tolerances. [This section includes all modifications through Team Update 10]
3 THE ARENA [This section includes all modifications through Team Update 10] 3.1 OVERVIEW Note: The animated pictures in this section of the manual are for a general visual understanding of the field only.
More informationHighlander Specifications
Highlander Specifications July 22, 2012 Highlander Specifications The intent of this section is to clarify and add to what is shown in the official plans. In case of conflict between these specifications
More informationList of Figures. List of Tables
City of Columbia Engineering Regulations PART 19: SPECIFICATIONS FOR FENCING MATERIALS Table of Contents Paragraph Description Page No. 19.1 General 19-1 19.2 Construction Materials 19-1 List of Figures
More informationUnit 7. Math Problem 1. This segment will go through the endpoint of the original line segment, perpendicular to the line segment.
Math 1007 Unit 7 1 Construct a square with sides equal to r. 1: Extend the segment and draw a circle centered at one of the endpoints of the segment 2: Draw two larger congruent circles centered where
More informationJune x. 2. x. 3. x. Sunday Monday Tuesday Wednesday Thursday Friday Saturday 8.NS.1 8.NS.1 8.NS.1 8.NS.1 8.NS /3 + 1/9 2.
June 2018 Sunday Monday Tuesday Wednesday Thursday Friday Saturday 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Father s Day 24 25 26 27 28 29 30 1. 1/3 + 1/9 2. 1 8/9 + 3 2/3 3. 9 6/7 +
More informationHow to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø
Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note
More informationSECTION 10iS: TAILCONE
VAN'S AIRCRAFT, INC. F-1282-R BOTTOM RIGHT SKIN F-1283C J-STIFFENER F-1278 TOP SKIN F-00009-L ADAHRS BRACKET F-00009-R ADAHRS BRACKET F-1279-R UPPER RIGHT SKIN F-1280-R RIGHT SIDE SKIN SECTION 10iS: TAILCONE
More informationWomen s Shirt Measure your best fitting shirt
Women s Shirt Measure your best fitting shirt Please note that the shirt should be laid flat on a table or smooth surface for proper measurement. 1. COLLAR The collar measurement should be taken from the
More informationMaking a Chin Na / Wing Chun arm
Making a Chin Na / Wing Chun arm Total Costs: 1 arm: 16-20 $ 2 arms: 32 to 35 dollars Tools Needed Saw (electric of hand) Drill Patience Material 1 PVC tube, 1 meter (50 cm diameter ) 3,50 $ / (enough
More informationDEADBOLT SETS, MECHANICAL FEATURES
, MECHANICAL FEATURES 8000 SERIES LOW PROFILE CYLINDER DEADBOLT FOR 1 5 8 (41mm) DOOR PREP All deadbolts feature a ½ low-profile cylinder projection. CASE: Deadbolt case is formed of heavy gauge steel
More informationSample Procurement Specifications for Aluminum Traffic Control Signs and Components
Sample Procurement Specifications for Aluminum Traffic Control Signs and Components These sample procurement Specifications were prepared by the American Traffic Safety Services Association (ATSSA) Sign
More informationThe total solution for Extruded aluminium components
The total solution for Extruded aluminium components Extrusions can be supplied in small or large order quantities with an exceptionally fast turnaround; Capalex is THE first choice for your standard profile
More informationFlex Series. Series Specifications & Description... Laminate Table Top & Base Chart... Product by Category. Sample Table Layouts... Bases...
Flex Series This is a metric series (imperial sizing available). Please refer to page INDEX-1 for details Series Specifications & Description... FLX-1 Laminate Table Top & Base Chart... Product by Category
More informationManual Lifting: The NIOSH Work Practices Guide for Manual Lifting Determining Acceptable Weights of Lift
Manual Lifting: The NIOSH Work Practices Guide for Manual Lifting Determining Acceptable Weights of Lift Job Description Gary S. Nelson, Henry Wickes, and Jason T. English Cartons of product are accumulated
More informationSkylight Rollers For Velux windows
For Velux windows Velux windows are identified by the Velux branded data plate on the sash of the window. No measuring required. page 13 features Steel barrel Extremely reliable, lightweight and strong.
More informationGEOMETRY CIRCLING THE BASES PRE-VISIT - BALLPARK FIGURES - PART 2
PRE-VISIT - BALLPARK FIGURES - PART 2 OBJECTIVE: Students will be able to: Identify the formulas for finding circumference and area of a circle. Calculate the circumference and area of given circles. TIME
More informationConstruction Graphics
NOTE: PHASING MAY CHANGE IN THE FUTURE. Hoya St. Rockville Pike 463 1 387 1,860 lineal ft total Old Georgetown Rd. Locations Phase 1 SCRIMS. THOSE ON THE PERIMETER ARE LOCATED ON THE PROPERTY LINE. INTERNAL
More informationYou can use a variety of materials for this kite, such as Tyvek, ripstop nylon, Orcon, paper, or mylar or mylar-like plastic gift wrap films.
Woody's " Woodtick " Fighter Kite This kite is easy to make and easy to fly. It's performance will allow you to learn all fighter kite flying skills, plus put an ear to ear grin on your face. What more
More informationthreaded rod Keystock Diamond Case Linear Shafting strapping seals tools
threaded rod Keystock Diamond Case Linear Shafting strapping seals tools THREADED STEEL ROD... 19-2 KEY STOCK... 19-2 STEEL STRAPPING... 19-3 DIAMOND CASE SHAFTING Carbon (1060) Standard Sizes... 19-4
More informationC.O.M. Drapery. Wholesale
WORKROOM C.O.M. Drapery Wholesale P1 2 Phone: 800.397.4556 Fax: 800.998.3278 EasternAccents.com/Design Table of Contents How To Order 4 Railroaded vs. Up the Roll Fabrics 6 How To Measure 7 Yardage Charts
More informationBicycle Management Products From Columbia Cascade Company
SM CycLoops Twist Bicycle Management Products From Columbia Cascade Company 12 93 13 12 93 14 Artful CycLoops (3) 2178-83-E-C 2178-52-E-C < Original CycLoops CycLoops Arch Super CycLoops 2175-8-P-S Perforated
More informationBARRIER OFFSET 0" A 6" 6" A 12" 12" A 26" A 26" 3A OR 4A L OR S * ** L OR S L OR S
ACCEPTABLE (TCB) TYPES AND ANCHORING DETAILS BASED ON UNDERLYING SURFACE TYPE AND BARRIER OFFSET FROM DROP-OFF BARRIER OFFSET UNDERLYING SURFACE 0" A 6" 6" A 12" 12" A 26" A 26" TCB TYPE DETAIL TCB TYPE
More informationParking Lot HW? Joke of the Day: What do you get when you combine a flat, infinite geometric figure with a beef patty?
Parking Lot HW? Joke of the Day: What do you get when you combine a flat, infinite geometric figure with a beef patty? a plane burger Agenda 1 23 hw? Finish Special Right Triangles L8 3 Trig Ratios HW:
More informationItem 404 Driving Piling
Item Driving Piling 1. DESCRIPTION Drive piling. 2. EQUIPMENT 2.1. Driving Equipment. Use power hammers for driving piling with specified bearing resistance. Use power hammers that comply with Table 1.
More informationThe Agility Association of Canada
Check list to Prepare for Equipment Inspection 2018 Introduction: requires that all equipment used at sanctioned events be inspected and approved at least four months before a host s first trial, and regularly
More informationThe Agility Association of Canada
APPENDIX F - OBSTACLE CONSTRUCTION STANDARDS, 2018 JUMP HEIGHTS F 2 Obstacle Specifications F 2.5 Jumps: General Construction Notes Notes: Jump height is measured from the ground to the top of the pole
More informationXCE: Explosionproof Control Enclosures
XCE SERIES XCE: Explosionproof Control Enclosures FEATURES 64 standard sizes available Pre-drilled for hinges (hinges optional) Pre-drilled for sub-panel (sub-panel optional) One-piece, NEMA 4 water-tight
More informationRevisions to the Regulations for Agility Trials
Revisions to the Regulations for Agility Trials Effective January 2, 2018 Equipment changes may be done prior to January 2, 2018, but must be completed by January 2, 2018 This insert is issued as a supplement
More informationaussie rules/ rugby Training aussie rules/ rugby Training
GART-001 Tackle Training Bag Covered with Non tearing waterproof tarpaulin material. Perfect training tool for senior level. Ideal equipment to teach tackling technique and repetitive technical skill.
More informationA Table Top Wind Tunnel You Can Build
A Table Top Wind Tunnel You Can Build Basic principles of aerodynamics can be studied in the classroom with this simple, inexpensive wind tunnel. All you need to build it is some cardboard boxes, glue,
More informationHardened Steel Washers
USS (Type A Wide) Flat Washers Hardened Steel Washers Grade 8 S.A.E. Dimensions American Standard Lbs. Per No./Pcs. Gauge M Pcs. Per Lb. 3/16 9/16 1/4 18 (3/64) 2.8 361 1/4 3/4 5/16 16 (1/16) 6.7 149 5/16
More informationInstallation Instructions
116-3027, 116-3017 X-Pando Adjustable Steel Protector Installation Instructions 1404 N. Marshall Ave. El Cajon CA. 92020 For technical support call us at (800) 368-3075 NB 6/28/10 607-0112 Step 1. Mounting
More information12-2 Area of Circles. Find the area of each circle. Round to the nearest tenth. 1. ANSWER: m 2. ANSWER: 12.6 yd 2 ANSWER: 132.
Find the area of each circle. Round to the nearest tenth. 1. 6. A motion detector at the corner of a building can detect motion outside within a radius of 20 feet as shown. Within what area can it detect
More informationSECTIONALS GUIDE. U-Chaise Sectional* Consists of (L to R): 1 Left-Arm Chaise, 1 Armless Sofa and 1 Right-Arm Chaise
SECTIONALS GUIDE SECTIONAL COMPONENTS Our sectionals are composed of the following pieces: an armless chair or sofa; a left-arm chaise, sofa or corner sofa; and/or a right-arm chaise, sofa or corner sofa.
More informationInstant Garage 20' x 12' 3" x 8' 3"
Instant Garage 20' x 12' 3" x 8' 3" Assembly Instructions Description Model # Instant Garage 20' x 12' 3" x 8' 3" - Grey CIG 1220 3503502 Recommended Tools OR THIS IS A TEMPORARY STRUCTURE AND NOT RECOMMENDED
More informationMaking Spars for the Schooner Jeanette
Making Spars for the Schooner Jeanette..... by Byron Rosenbaum Figure 1. Byron Rosenbaum s 1:16-scale radio-controlled model of the schooner Jeanette. All photographs by the builder. The spars required
More informationBelt strength. Available the belt. (kg/m) PP - Polypropylene 2, to [B] PE - Polyethylene 1, to [B]
SERIES E20 FLAT TOP Eurobelt Series E20 Flat Top, due to a closed surface configuration, is the suitable conveyor belt for those applications in which it is not necessary any drainage through the belt
More informationCONSTRUCTION OF A GUNBOAT A CLASS YACHT by Brian Dill
CONSTRUCTION OF A GUNBOAT A CLASS YACHT by Brian Dill The Gunboat design is the latest Radio A class from Graham Bantock, optimised to provide the best boat speed below 4 knots and to be as good as possible
More informationMiramar Templates & Pans
Miramar Templates & Pans Enhance Your Buffet Presentation! Miramar Resin Templates n Durable FDA approved thermoset resin construction ideal for hot or cold applications n Heat resistant to 300 F (48.8
More informationPractice Test. 2 What is the area of this figure?
Practice Test 1 Which letter has a line of symmetry? S J R W L 3 Jane's house has a garden which is in the shape of a square. If each side of the garden is 18 feet then what is the perimeter of the garden?
More informationAssembly, Installation, Care, Maintenance and Use Instr uctions.
UPPER BOUNCE Enclosure Set & Enclosure Net USER MANUAL Assembly, Installation, Care, Maintenance and Use Instr uctions. This Instructions manual is for Upper Bounce Enclosure Sets and Enclosure Nets which
More informationQuality Cutting Tools Carbide Tipped Solid Carbide 2009
Quality Cutting Tools Carbide Tipped Solid Carbide 2009 Keyseats Counterbores End Mills Drills Reamers INDEX BY NAME 2 INDEX OF PRODUCTS PAGE SHANK CUTTERS Chamfer Cutters 17 Corner Rounding Cutters 18
More informationTURN ARROW. LANE-REDUCTION ARROW (RIGHT) (For Left Lane, Use Mirror Image) LANE-REDUCTION ARROW MARKING DETAIL
Center of Lane TURN ARROW (Right Arrow Opposite) 8.00' 14.85' 5.67' 5.67' 4.36' 2.57' Center of Lane 6.37' 2.85' 7.50' 10.50' 18' W4-2R d/4 Speed (S) Lane Width (W) (MPH) (FT) 25 30 35 40 Lane-Reduction
More informationKeeping Memories Alive
Keeping Memories Alive P r od u c t C ata l o g Life is about making precious memories, let s keep them alive forever. 2015 Supernova intl. inc. Cremation solutions cremation memorials It s what s above
More informationFront chainwheel. Dealer's Manual. ROAD MTB Trekking. City Touring/ Comfort Bike ACERA FC-M3000 FC-M3000-B2 FC-M ALTUS FC-M2000
(English) DM-MDFC001-01 Dealer's Manual ROAD MTB Trekking City Touring/ Comfort Bike URBAN SPORT E-BIKE Front chainwheel ALIVIO FC-M4000 FC-M4050 FC-M4050-B2 FC-M4060 ACERA FC-M3000 FC-M3000-B2 FC-M3000-8
More informationThis document will provide detailed specifications, a bill of materials (BOM), and assembly instructions for the Official Competition Field.
This document will provide detailed specifications, a bill of materials (BOM), and assembly instructions for the Official Competition Field. Please note that this field utilizes the VEX IQ Challenge Field
More information1. KNOBBED CYLINDERS (CYLINDER BLOCKS)
1. KNOBBED CYLINDERS (CYLINDER BLOCKS) Visual Sense: Discrimination of Size, Matching Material: Four blocks, each containing ten cylinders with knobs, with each cylinder fitting into its respective hole
More informationCATBOX. A Puddle Duck Racer. By Jim Michalak
CATBOX A Puddle Duck Racer By Jim Michalak CAT BOX HULL SPECIFICATIONS 1. Bow transom from 1/4" plywood. Top and bottom edges framed with 3/4 x 1-1/2" lumber with bevels as shown. Mark centerlines boldly.
More informationINTERNATIONAL FLYING FIFTEEN CLASS MEASUREMENT FORM
INTERNATIONAL FLYING FIFTEEN CLASS MEASUREMENT FORM 2014 Authority: * International Sailing Federation, Ariadne House, Town Quay, Southampton, Hampshire, SO14 2AQ, UK IN ORDER TO OBTAIN A MEASUREMENT CERTIFICATE
More informationTechnical Service BULLETIN
Technical Service BULLETIN May 5, 2000 00 ECHO BO018 00 BODY Introduction Blackout tape is used instead of black paint on the door sash of the 2000 ECHO. Please use the following instructions to apply
More information[Title of the course]
As with non-metallic raceway, Hubbell metal raceway is available in a variety of styles. There are 13 metal raceway profiles 8 painted and 5 aluminum for customers to choose from! ALL Hubbell painted metal
More informationGeneral Information Gravity roller conveyors are available in many sizes and configurations as shown on the following pages. There are many factors to consider when selecting a gravity conveyor. The following
More informationRevised from Mr. Underwood s Dragon Putt-Putt Project. Challenge 1
Activity: Dragon Putt-Putt 1 Revised from Mr. Underwood s Dragon Putt-Putt Project Challenge 1 In Challenge 1, you will be constructing a scale drawing of two or three miniature golf holes. In order to
More informationPhoto Coming. Utility Anchors. macleanpower.com
Photo Coming Utility Anchors macleanpower.com Utility Anchors MPS Utility Anchors MacLean Power Systems has served the utility anchor market for over 90 years. With a rich history of quality, innovation
More informationCAISSON SHAFT SYSTEM
CAISSON SHAFT SYSTEM Installation Guide INSTALLATION GUIDE FOR DN2000 TO DN3660 UNITS PLATE JOINTING SYSTEM This guide is to be used for the Installation of CPM Group Ltd caisson shaft units which use
More informationProtoTrak Knee Mill Model K3 ~ EMX Control 2 - Axis CNC ~ 3 - Axis DRO
P# 0 DRILL 1/4" DIA. X.20 DP. (4) EQUALLY SPACED ON A.530 DIA. B.H.C. 1.625 DIA 1/8" SLOT X.05 DEEP (2).6875 RAD.5625 RAD.5962 Events ID On Print 10 Points.1875 Tool List 10 Points Events ID On Print Plot
More informationBELGIAN CAMELBACK SLIPCOVERED & UPHOLSTERED COLLECTION
BELGIAN CAMELBACK SLIPCOVERED & UPHOLSTERED COLLECTION 5' Sofa 6', 7'*, 8'*, 9' and 10' Sofa Chair* and Swivel Chair Ottoman Daybed Sofa Chaise Left-Arm Sofa Chaise Sectional Right-Arm Sofa Chaise Sectional
More informationInstant Garage 16' x 12' 3" x 8' 6"
Instant Garage 16' x 12' 3" x 8' 6" Assembly Instructions Door Height 1.8M A B DESRIPTION MODEL # A B IG 1216 Instant Garage 4.9 x 3.7 x 2.6 M - Grey 3503500 16' x 12' 3" x 8' 6" REOMMENDED TOOLS OR Please
More informationGroove Dimensions For Standard Wear Ring Widths
NYLON WER RING TEHNIL INFORMTION T E T X D X W W - YLINDER ORE - ROD DIMETER - MINIMUM ORE MINUS.253/.256 D - MXIMUM ROD DIMETER PLUS.253/.256 E - GROOVE WIDTH T - THIKNESS OF WER RING W - WIDTH OF WER
More information400 Series Circle & Oval Windows (1991 to Present)
400 Series Circle & Oval Windows (1991 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Circle and Oval Windows........................................... Page 3 Parts Illustration...........................................................
More informationSCREEN OPENINGS FOR STRAINERS
SCREEN OPENINGS FOR STRAINERS 100 Mesh - 30% O.A. 0.006 Openings 80 Mesh - 36% O.A. 0.008 Openings 60 Mesh - 38% O.A. 0.010 Openings 40 Mesh - 41% O.A. 0.016 Openings 30 Mesh - 45% O.A. 0.022 Openings
More informationFREEFORM POOL MEASURING GUIDELINES: HOW TO FILL OUT YOUR FREEFORM FORM!
FREEFORM POOL MEASURING GUIDELINES: HOW TO FILL OUT YOUR FREEFORM FORM! Read instructions fully and carefully both here and on your Freeform Measurements form. Liners are non-refundable and an error in
More informationModule 8 Coils and Threads
Inventor Self-paced ecourse Autodesk Inventor Module 8 Coils and Threads Advanced Learning Outcomes When you have completed this module, you will be able to: 1 Describe a coil and a thread. 2 Apply the
More informationE10 E10 E10 E10 E10 E10 E10 E10 E10 E10 E10 E10 E10 E10. Cable gland Series 8161/7, 8161/8. Installation Equipment and Accessories E10/1.
> Explosion protection type "Increased safety" > Degree of protection IP68 > Ex e and Ex i versions > Integrated blind plug (accessory) for closing unused cable glands > Cable diameter ranges from 1 to
More informationDRAGONFLITE 95 RESTRICTED CLASS RULES 2016
DragonFlite Force 95, Restricted Class Rules 2016 2013 Version 1.0 DRAGONFLITE 95 RESTRICTED CLASS RULES 2016 Version 1.0 DF Racing Rules Committee 2016 Introduction The DragonFlite 95 (DF95) project started
More informationCR 914 Class Rules. Revised July 15, 2000 See also CR-914 Class Rule Interpretations
CR 914 Class Rules Revised July 15, 2000 See also CR-914 Class Rule Interpretations 1 GENERAL - CLASS: The CR 914 is a One-Design class. The Class objective is that the sailing skills of the skipper shall
More informationNo. How long do you have to stand in line. Figure This! How long do you think you. would have to wait in this line if you hold number 300?
#1 Math Challenge LINE UP Figure This! How long do you think you How long do you have to stand in line No. 300 would have to wait in this line if you hold number 300 Hint: Estimate the amount of time it
More information1939 STOUT TROPHY WINNER
1939 STOUT TROPHY WINNER This model's 36-minute flight won the Stout Trophy and qualified the builder as captain of the American Moffett team. Bob Toft. Has won a second in gas, first in rubber at Nationals.
More informationThe Rubber Band Car. Lesson Guide. The Challenge: To build a car that moves under the power of rubber bands! Topics: Forces, Energy, Simple Machines
The Rubber Band Car The Challenge: To build a car that moves under the power of rubber bands! Topics: Forces, Energy, Simple Machines Version 1 Materials: 2 compact discs (per group) Corrugated cardboard
More information