Flange Adapters. Threadless, weldless transition from flanged piping systems to tubing systems
|
|
- Myrtle Kennedy
- 5 years ago
- Views:
Transcription
1 Flange dapters Threadless, weldless transition from flanged piping systems to tubing systems Flange types meet SM, IN, N, and IS standards One-piece integrally machined forged body vailable with Swagelok tube fitting end connections up to 50 and 2 in.
2 2 Flange dapters Features Flange types meet SM, IN, N, and IS standards Range of flange sizes and pressure classes Full range of sealing faces including flat face, raised face, RT, and tongue-and-groove 316 stainless steel material standard; optional materials include alloy 20, alloy 400, alloy 600, and alloy C-276 Wrench flats for ease of tube fitting assembly Gaugeability on initial installation using Swagelok gap inspection gauges nd Connections Metric and fractional Swagelok tube fittings from 3 to 50 and 1/16 to 2 in. Metric and fractional Swagelok tube adapter fittings from 6 to 50 and 1/4 to 2 in. Flange Connections SM 16.5 Nominal flange sizes from NPS 1/2 to 2 in. Pressure class ratings from 150 to 2500 IN 2526 / IN 2501 Nominal flange sizes from N 15 to 50 Pressure class ratings from PN 40 to 320 N Nominal flange sizes from N 15 to 50 Pressure class ratings from PN 40 to 100 IS 2220 Nominal flange sizes from N 15 to 50 Pressure class ratings from 10 to 63K Flange adapters to meet additional standards, such as PI and ISO, are available upon request. Regulatory Compliance Stainless flange adapters with N, IN (up to PN 160), and NSI flanges have been shown through type-test approval TÜ/TÜV /R to comply with the uropean Pressure quipment irective (P) and the leakage requirement of T-LUFT ccording to the P, flange adapters are classified as piping components and may not bear the C-marking. Cleaning and Packaging ll Swagelok flange adapters are cleaned in accordance with Swagelok Standard Cleaning and Packaging (SC-10), MS Wrench flats Flange Materials One-piece forged body Material STM Specification 316 stainless steel➀ 182 lloy lloy 400 lloy lloy C-276 ➀ Over 1 in. and over 25 stainless steel fittings use stainless steel ferrules with PF coating. pplications above 450 F (232 C) require silver-plated front ferrules and uncoated back ferrules. To order fittings with silver-plated ferrules and uncoated back ferrules, add -M to the ordering number. xample: SS-6M0-F25M-40-C-M Sealing face
3 Flange dapters 3 Ordering Information and imensions imensions are for reference only and are subject to change. NSI Flanges NSI O Flange Ordering Number imensions, in. in. NPS Class Raised Face Flange F 1/4 1/2 150 SS-400-F / /8 1/2 300 SS-600-F / /2 1/2 SS-810-F SS-810-F / SS-810-F / SS-1210-F / SS-1610-F / /2 2 SS-2400-F / SS-3200-F / Pressure-Temperature Ratings Ratings are taken from SM , Table and Table F Pressure ratings for fittings with a flange end connection and another end connection are determined by the connection with the lower pressure rating. Working Pressures by Classes, psig Temperature SM Class F to Working Pressures by Classes, bar Temperature SM Class C to
4 Ordering Information and imensions imensions are for reference only and are subject to change. Flange dapters 4 IN Flanges, Pressure Class PN 40 O IN Flange Size N Ordering Number Raised Face Flange imensions F 6 25 SS-6M0-F25M-40-C SS-12M0-F15M-40-C SS-12M0-F25M-40-C SS-12M0-F50M-40-C SS-18M0-F15M-40-C SS-18M0-F25M-40-C SS-25M0-F25M-40-C SS-38M0-F50M-40-C SS-50M0-F50M-40-C N Flanges, Pressure Class PN 40 O N Flange Size N Ordering Number Raised Face Flange imensions F 6 25 SS-6M0-F SS-12M0-F SS-12M0-F SS-12M0-F SS-18M0-F SS-18M0-F SS-25M0-F SS-38M0-F SS-50M0-F IS Flanges, Pressure Class 10K O IS Flange Size N Ordering Number imensions Raised Face Flange F imensions, in. 1/4 SS-400-F15-10K-RF /8 SS-600-F15-10K-RF / /2 SS-810-F15-10K-RF /4 SS-1210-F15-10K-RF / SS-1610-F25-10K-RF / SS-3200-F50-10K-RF / imensions, SS-12M0-F15-10K-RF SS-18M0-F15-10K-RF SS-25M0-F25-10K-RF
5 5 Flange dapters Ordering Information, Special-Order Flange dapters For standard stainless steel flange adapters, select an ordering number from the tables on page 3 and 4. uild a special-order flange adapter by combining the designators in the sequence shown below. Flange Material SS = 316 stainless steel➀ C20 = lloy 20 M = lloy 400 INC = lloy 600 C = lloy C-276 ➀ Over 1 in. and over 25 stainless steel fittings use stainless steel ferrules with PF coating. pplications above 450 F (232 C) require silverplated front ferrules and uncoated back ferrules. To order fittings with silver-plated ferrules and uncoated back ferrules, add -M to the ordering number. xample: SS-6M0-F25M-40-C-M nd Connection Size Swagelok Fitting Fractional Metric 100 = 1/16 in. 3M0 = = 1/8 in. 6M0 = = 1/4 in. 8M0 = = 3/8 in. 10M0 = = 1/2 in. 12M0 = = 3/4 in. 18M0 = = 1 in. 20M0 = = 1 1/2 in. 22M0 = = 2 in. 25M0 = 25 28M0 = 28 32M0 = 32 38M0 = 38 50M0 = 50 Swagelok dapter➀ Fractional Metric 4-T = 1/4 in. 6-MT = 6 6-T = 3/8 in. 8-MT = 8 8-T = 1/2 in. 10-MT = T = 3/4 in. 12-MT = T = 1 in. 18-MT = T = 1 1/2 in. 20-MT = T = 2 in. 22-MT = MT = MT = MT = MT = MT = 50 ➀ Over 1 in. and over 25 tube adapter fittings are furnished with nuts and preswaged ferrules. SS - 6M0 - F25 M C Sealing Face (Raised Face Standard) NSI (no designator) IN C N See IN 2526 for surface finish details 1 See N for 2 surface finish details IS RF For other sealing faces, including flat face, RT, and tongue-and-groove, contact your authorized Swagelok sales and service representative for more information. Pressure Class NSI 150 = = = = = = 2500 IN 40 = PN = PN = PN = PN = PN = PN 320 N 40 = PN = PN = PN 100 IS 10K = 10 kg/cm 2 30K = 30 kg/cm 2 16K = 16 kg/cm 2 40K = 40 kg/cm 2 20K = 20 kg/cm 2 63K = 63 kg/cm 2 Flange Standard = IS = N M = IN No designator = NSI Nominal Flange Size Fractional (NSI) Metric (IN, N, IS) F8 = NPS 1/2 in. F15 = N 15 F12 = NPS 3/4 in. F20 = N 20 F16 = NPS 1 in. F25 = N 25 F24 = NPS 1 1/2 in. F50 = N 50 F32 = NPS 2 in.
6 Options ored-through Flange dapters for Thermocouples and ip s Swagelok bored-through flange adapters with Swagelok tube fitting ends accoodate thermocouples or dip tubes. To order, add T to the ordering number. xample: SS-6M0-F25M-40-CT Fitting Lap oint Stubs Stainless steel lap joint connectors are available for use with 1/2 in. lap joint pipe flange adapters. Select an ordering number. O Sealing Surface Finish (R a ) Ordering Number 3/8 in. 125 to 250 μin. SS (3.2 to 6.4 μm) SS-10M Swagelok Fittings See the Swagelok Gaugeable Fittings and dapter Fittings catalog, MS , for more information. enders See the Swagelok Tools and ccessories catalog, MS , for more information. Tubing Products Swagelok also offers a wide variety of tubing products. Contact your authorized Swagelok representative for details. Tubing ata See Swagelok Tubing ata, MS , for more information on tubing data. Multihead ydraulic Swaging Unit (MSU) See the Swagelok ydraulic Swaging Unit Multihead (MSU) catalog, MS , for more information. Safe Product Selection When selecting a product, the total system design must be considered to ensure safe, trouble-free performance. Function, material compatibility, adequate ratings, proper installation, operation, and maintenance are the responsibilities of the system designer and user. Caution: o not mix or interchange parts with those of other manufacturers. Warranty Information Swagelok products are backed by The Swagelok Limited Lifetime Warranty. For a copy, visit swagelok.com or contact your authorized Swagelok representative. Swagelok TM Swagelok Company 2003, 2004, 2005, 2007 Swagelok Company Printed in U.S.., GLI October 2007, R3 MS
VCO O-ring Face Se al Fit tings
www.swagelok.com O-ring Face Se al Fit tings /8 to sizes 36 or 36L stainless steel, NPT, S thread, and weld connections 2 O-ring Face Seal Fittings ontents Features........................................
More informationSample C ylinde rs, Acce ssorie s, and O utage Tube s
www.swagelok.com Sample C ylinde rs, cce ssorie s, and O utage s Features Sizes from 10 to 3785 cm 3 (1 gal) Working pressures up to 5000 psig (344 bar) 304L and 316L stainless steel and alloy 400 2 Sample
More informationVCO O-Ring Face Seal Fittings
O-Ring Face Seal Fittings www.swagelok.com O-Ring Face Seal Fittings /8 to sizes 36 or 36L stainless steel, NPT, S thread, and weld connections 2 Weld, VR,, Pipe, and Vacuum Fittings ontents Technical
More informationTank Blanketing Pressure Regulators RHPS Series
www.swagelok.com Tank Blanketing Pressure Regulators RHPS Series Types: pressure reducing and vapor recovery 16L stainless steel construction 1/2, 1, and 2 in. end connections Working pressures up to 22
More informationPropor tional Re lief Valve s
www.swagelok.com Propor tional Re lief Valve s R Series Liquid or gas service Set pressures from 10 to 6000 psig (0.68 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections Proportional Relief Valves
More informationProportional Relief Valves
www.swagelok.com Proportional Relief Valves R Series Liquid or gas service Set pressures from 10 to 6000 psig (0.68 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections 2 Proportional Relief Valves
More informationHOSE & FLEXIBLE TUBING
http://southwest.swagelok.com HOSE & FLEXIBLE TUBING PROVIDED BY SWAGELOK SOUTHWEST SWAGELOK SOUTHWEST Swagelok Hose and Flexible Tubing Metal Hose & Tubing FX Series Metal Hose FM Series Metal Hose FJ
More informationRHPS Series PRV 6 User Manual
RHPS Series PRV 6 User Manual Read the complete manual before installing and using the valve. 1 WARNING Before removing a valve from the system for service, you must depressurize system purge the system
More informationRHPS Series RD(H)F40 User Manual. Read the complete manual before installing and using the regulator.
RHPS Series RD(H)F40 User Manual Read the complete manual before installing and using the regulator. 2 WARNING Before removing a regulator from the system for service, you must depressurize system purge
More informationAlbany Connecticut Vermont Westchester
Natural Gas Sampling Sample Cylinders Grab Sample Panels Natural Gas field sampling is performed to determine gas composition, specific gravity, hydrocarbon dew point and natural gas value. Accurate gas
More informationTHE PROCESS OF JOINT INTEGRITY
BOLTED JOINTS A.333 THE PROCESS OF JOINT INTEGRITY To assist in managing a process, ask yourself the following questions: why, what, who, and how? Why do we need a Flange Joint Integrity program? This
More informationRHPS Series PRV 2 all types of connections User Manual
RHPS Series PRV 2 all types of connections User Manual Read the complete manual before installing and using the valve. Before removing a valve from the system for service, you must depressurize system
More informationCOMPRESSION TUBE FITTINGS
COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM LET-LOK TUBE FITTINGS DESCRIPTION The HAM-LET GROUP has produced high quality tube and pipe LET-LOK HOW DOES IT WORK? A HAM-LET has gained an
More informationprecision pipe fittings
Precision Pipe Fittings 1 8 to 1 sizes 316 stainless steel, brass, and exotic materials NPT threads HOKE PO Box 4866 Spartanburg, SC 29305-4866 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com Sales-hoke@circor.com
More informationAdapters and Tube Fittings Index
dapters and Tube Fittings Index lphabetical Index PRESSURE HOSE HIGH PRESSURE HOSE HOSE FITTINGS TUBE FITTINGS DESCRIPTION PGES DESCRIPTION PGES DESCRIPTION PGES DESCRIPTION PGES dapters 196 Braze and
More informationFittings, Materials and Tubing Guide. Instrumentation Products
Fittings, Materials and Tubing Guide Fittings, Materials and Tubing Guide Instrumentation Products MPI Medium Fittings Introduction Hannifin Fittings are engineered and manufactured to provide secure,
More informationCOMPRESSION TUBE FITTINGS
COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM LET-LOK TUBE FITTINGS DESCRIPTION The HAM-LET GROUP has produced high quality tube and pipe fittings in various materials for high pressure applications
More information// ADapters GUIDelines
// ADapters GUIDelines ADAPTER SELECTION Selection of an appropriate ALFAGOMMA adapter for a given application depends on the fluid system operating parameters listed below and the tube material and wall
More informationHigh-Flow, Manual Gas Pressure Regulators
High-Flow, Manual Gas Pressure Regulators HF Series 1 www.swagelok.com High-Flow, Manual Gas Pressure Regulators HF Series Compact size with flow rates up to 2 std L/min Maximum inlet pressures up to 5
More informationSWAGELOK HOSES HOSE & FLEXIBLE TUBING SWAGELOK BANGALORE CHENNAI DELHI HYDERABAD
SWAGELOK HOSES HOSE & FLEXIBLE TUBING SWAGELOK BANGALORE CHENNAI DELHI HYDERABAD Swagelok Hose and Flexible Tubing Metal Hose & Tubing FX Series Metal Hose FM Series Metal Hose FJ Series Metal Hose FL
More informationCable Glands. Special Applications. RoHS Compliance. Plastic & Metal Cable Glands Adapters Reducers & Enlargers Grommets & Accessories
able Glands RoHS ompliance Plastic & Metal able Glands dapters Reducers & Enlargers Grommets & ccessories L File #: E363825 cable gland is a device that allows the user to pass a cable, wire or tube into
More informationENGINE/ PUMP ADAPTERS
ENGINE/ PUMP PTERS Hayes Manufacturing, Inc. Fife Lake, MI 9633 Phone: 23-879-3372 Fax: 23-879-330 TRNSMISSION PROUTS Fife Lake, MI 9633 Phone: 23-879-3372 Fax: 23-879-330 Table Of ontents Engine/ Mount
More informationACME Connectors and Fittings Extended Type Hose Couplings for Vapor and Liquid Service A7571 and A7575 Series
M onnectors and Fittings xtended Type Hose ouplings for Vapor and Liquid Service 7571 and 7575 Series esigned especially for liquid filling and vapor equalization of LP-Gas and anhydrous ammonia. The limited
More informationWorld Area Differences Technical Information
World Area Differences Technical Information DMISC2047X02 This document is to give more information about the following: Porting & Threads Cleaning Procedures Conversion Tables PORTING & THREADS NPT (National
More informationRS(H)20, 25 USER MANUAL
RS(H)20, 25 USER MANUAL Read the complete manual before installing and using the regulator. WARNING Before removing a regulator from the system for service, you must depressurize system purge the system
More informationAWWA Pipe Flanges. AWWA C Standard Steel Hub Flanges Class D AWWA C Standard Steel Hub Flanges Class E AWWA C Flange Manufacturer
WW Pipe Flanges WW Flanges are commonly used in waterworks, wastewater, slurry, plant piping or other light duty applications generally requiring pressures of less than 300 psi. Pressure ratings for WW
More information6200E Installation Requirements
Requirements When purchasing a standalone 6200E unit with the calibrator, the analyzer will be supplied as three 19 rack mount units. Analyzer Converter Calibrator Included with the unit are two lengths
More informationcompression tube fittings
compression tube fittings table of contents roduct range overview.004 Technology overview.006 selecting the right fitting.008 -- Materials.008 -- Thread & nd Connections.009 -- Visual Identification.010
More informationRD(H)20/25 Pressure-Reducing Regulator User Manual
RD(H)20/25 Pressure-Reducing Regulator User Manual Read the complete manual before installing and using the regulator. 2 Safe Product Selection When selecting a product, the total system design must be
More informationLRS(H)4 Pressure-Reducing Regulator User Manual
LRS(H)4 Pressure-Reducing Regulator User Manual Read the complete manual before installing and using the regulator. 2 Safe Product Selection When selecting a product, the total system design must be considered
More informationInstallation, Operating and Maintenance Instructions. V914 Cast Iron Flanged Swing Check Valve V914
Installation, Operating and Maintenance Instructions V914 Cast Iron Flanged Swing Check Valve V914 THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC and CE MARKING The Pressure Equipment Regulations 1999 (SI 1999/2001)
More informationSanitary pneumatic retractable fitting for use with Unical 9000 and Uniclean 900 automated control systems
Pneumatic Retractable Fittings SensoGate W 3 H Sanitary pneumatic retractable fitting for use with Unical 9 and Uniclean 9 automated control systems Easy installation offers genuine plug & play. The central
More informationBERMAD Waterworks. Pressure Reducing Valve. 700 Series. Model 720. Features and Benefits. Major Additional Features
Pressure Reducing Valve Flow and leakage reduction Cavitation damage protection Throttling noise reduction Burst protection System maintenance savings The Pressure Reducing Valve is a hydraulically operated,
More information1.0 - OPENING AND CLOSING THE DOOR
The purpose of this manual is to provide the user with instructions on how to safely open and close, how to conduct routine maintenance, and how to install the PEI TWINLOCK Closure on a pressure vessel.
More informationPlok. Rapid Mating Multi-Pin Industrial Connector. Amphenol Industrial Sine Systems * Pyle Connectors Corporation
- Plok Rapid Mating Multi-Pin Industrial onnector mphenol Industrial Sine Systems * Pyle onnectors orporation eatures and enefits Rapid mate spring loaded, push to mate, pull to unmate coupling system
More informationRegO Adapters, Connector, & Fittings
RegO dapters, onnector, & Fittings Extended Type ouplings for Vapor and Liquid Service esigned especially for liquid filling and vapor equalization of LP-Gas and anhydrous ammonia. The limited travel of
More informationHorizontal Bladder Tanks
DATA SHEET Horizontal Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationVertical Bladder Tanks
DATA SHEET Vertical Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationRS(H)10,15 USER MANUAL. Read the complete manual before installing and using the regulator.
RS(H)10,15 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to
More informationSECTION BUTTERFLY VALVES
SECTION 15112 BUTTERFLY VALVES PART 1 GENERAL 1.01 SUMMARY A. All butterfly valves shall be of the tight closing, rubber seated type and fully comply with the latest revision of AWWA Standard C504, Class
More informationBERMAD Waterworks. Pressure-Reducing Valve. 700 Series. Model 720. Features and Benefits. Major Additional Features
Pressure-Reducing Valve Flow and leakage reduction Cavitation damage protection Throttling noise reduction Burst protection System maintenance savings The Pressure-Reducing Valve is a hydraulically-operated,
More informationVERSION 1 SUMP PUMP PIT UNIT KAWAMOTO PUMP ASIA CO.,LTD.
SUMP PUMP PIT UNIT FEATURES All needed parts are assembled and united as a sump pit and easy to install for short period. Sump tank is made of SUS with epoxy coating and pipe is integrated by stainless
More informationIndustrial Products Catalog Tank Valves
Industrial Products Catalog Tank Valves Schrader International core competencies include high volume precision machining, assembly and testing of fluid control devices. Since developing the first pneumatic
More informationSeries 8500 Expansion Compensators. Catalog 674H
Series 8500 Expansion Compensators Catalog 674H 500 Laminated Bellows Expansion J Series 8500 on Joints Expansion Compensators Sizes 3/4" through 4" Threaded, welded, flanged and grooved steel pipe joints
More informationCA14 SG Iron Air and Gas Trap ½" and ¾" (Screwed)
ert. No. LRQ 9638 ISO 91 14 SG Iron ir and Gas Trap ½" and ¾" (Screwed) TI-P148-1 ST Issue 6 escription The 14 is a range of float type automatic liquid drainers for air and gas systems. The body and cover
More informationLARGE R/W GATE VALVES
The original, and the definitive standard. LARGE R/W GATE VALVES 24 THROUGH 54 STYLE 7000 AWWA C515 250 PSI NSF 61 Certified Fusion Bond Epoxy Coated 10 Year Limited Warranty M&H Valve is a division of
More informationModel MTB-ASME Vertical Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationCalibration and Switching Module
Calibration and Switching Module Application Guide A Swagelok Pre-Engineered Subsystem Pre-engineered subsystems available in weeks, not months. Field-tested design ensures optimum system performance.
More informationModel MTB-ASME Horizontal Bladder Tanks
DATA SHEET Model MTB-ASME Horizontal Bladder Tanks Features n UL Listed and FM Approved for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure
More informationModel MTB-ASME Vertical Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationConstant Pressure Crude Oil Container Model CPCCP
Installation, Operations, and Maintenance Manual Constant Pressure Crude Oil Container Model CPCCP The information in this manual has been carefully checked for accuracy and is intended to be used as a
More informationTorque Tube TB300 Digital Transmitters
Page 1 of 7 7E.300-E Issue 4-2009 Description Series TB300 torque tube liquid level instruments utilize the buoyancy exerted on a displacer when immersed in a liquid. The buoyancy on the displacer is proportional
More informationModel: 43T. Bermad Pressure Relief Valve
Model: 43T Bermad Pressure Relief Valve Installation Operation Maintenance Manual () Rev.C1_01.08.17 Page 1 of 10 Safety First BERMAD believes that the safety of personnel working with and around our equipment
More informationFITTING IDENTIFICATION AMERICANT THREAD TYPES APPENDIX ALFAGOMMA // APPENDIX. Dash numers. NPTF (National Pipe Tapered Fuel)
// FITTINGS GUIDelines FITTING IDENTIFICATION numers Most fluid piping system sizes are measured by dash numbers. These are universally used abbreviations for the size of component expressed as the numerator
More informationGas Lines. Technical Manual. Sumitomo (SHI) Cryogenics of America, Inc Vultee Street Allentown, PA U.S.A.
Gas Lines Technical Manual Sumitomo (SHI) Cryogenics of America, Inc. 1833 Vultee Street Allentown, PA 18103-4783 U.S.A. Revision F: April 2008 261320A TABLE OF CONTENTS Page DESCRIPTION...1 SPECIFICATIONS...2
More informationIndustrial Regulator Series 1800/2000
E S 85. Industrial Regulator Series / M Quality System QMI is ccredited by: R E I T ISO 9 ertified R E NSI R G I S T R R utch ouncil for ccreditation Measurement Engineers Since 86 merican Meter Series
More informationBeverage Systems. Component Inspection and Service TSB-Y Date: Subject: Products Affected: Description: July Inspection of CO 2
Component Inspection and Service Beverage Systems Technical Service Bulletin TSB-Y10-007 Date: July 2006 Subject: Inspection of CO 2 Pressure Control Circuits Products Affected: All Chart Beverage Systems
More informationBladder Accumulators. General Information. Bladder Accumulators. Introduction. Accumulator Function. Why use a Bladder Accumulator?
General Information Introduction Accumulator unction Bladder accumulators provide a means of regulating the performance of a hydraulic system. The design of the Stauff bladder accumulator makes use of
More informationExcess Flow Valves. General Information. How They Work. An Explanation and Warning. Proper Installation
xcess low Valves General Information RegO xcess low Valves have been designed, developed, and manufactured for a wide variety of industry needs for more than three decades. Throughout the years, those
More informationAVK SERIES 601, 602, 603 & 605 UNIVERSAL COUPLINGS, ADAPTORS & END CAPS INSTALLATION, OPERATION & MAINTENANCE MANUAL
Instruction for use Thank you for selecting an AVK product. With correct use, the product is guaranteed to deliver a long and reliable service. This manual has been prepared to assist you with the installation,
More informationPRESSURE REGULATORS UPSTREAM DIFFERENTIAL PRESSURE. APPLICATION: For maintaining a constant differential pressure across meter.
PRESSURE REGULATORS UPSTREAM DIFFERENTIAL PRESSURE APPLICATION: For maintaining a constant differential pressure across meter. PRESSURE RANGE: Steel: 10 psig to 300 psig CAPACITY: Refer to Table of Contents.
More informationClean Gas Filter. SF Series. Cartridge Type/Disposable Type IDFA IDFB IDH ID IDG IDK AMG AFF AM AMD AMH AME AMF ZFC SF SFD LLB AD GD SFC10
Clean Gas Filter SF Series Cartridge Type/Disposable Type Disposable type SFC0 Disposable type SFB30 Cartridge type SFA0 SFA20 SFA30 HAA HAW AT IDU FS A B IDH ID IDG IDK AMG AFF AM AMD AMH AME AMF ZFC
More informationINTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR WATER HEATER SUPPLY SHUTOFF VALVE WITH A / THERMAL EXPANSION CONTROL VALVE IGC 128-2006a8 1. PURPOSE 1.1 The purpose
More informationBERMAD Waterworks. Combination Air Valve. Air Valves Series. Typical Applications. Features & Benefits. Additional Features.
BERMA Waterworks Combination Air Valve Model C7 BERMA C7 is a high quality combination air valve for a variety of water networks and operating conditions. It evacuates air during pipeline filling, allows
More informationP33 Safety Exhaust Valve Externally Monitored. Bulletin 0700-B14 ENGINEERING YOUR SUCCESS.
P Externally Monitored ulletin 07004 ENGINEERING YOUR SUESS. Features Externally Monitored Function When applications demand a safe environment you can count on safety valves from Parker Hannifin. The
More informationMUELLER. Mega-Lite Drilling Machine. Reliable Connections. table of contents PAGE. Equipment 2. Operating Instructions 3-4. Parts Information 5
operating Instructions manual MUELLER Mega-Lite Drilling Machine table of contents PAGE Equipment 2 Operating Instructions 3-4 Parts Information 5 Travel Charts 6-11! WARNING: 1. Read and follow instructions
More informationInstallation Instructions
Installation Instructions Durametallic MD-200 Series Gas Dual Cartridge Canister Seal for Mixers and Agitators Experience In Motion 1 Equipment Check 1.1 Follow plant safety regulations prior to equipment
More informationModel 1800 PFM Series Regulator
Model 800 PFM Series Regulator Model 800 PFM Series Regulator 0 Elster 800 PFM Series Regulator losing Springs For improved lock-up performance Low differential High differential (See losing Spring chart
More informationCOMPRESSION TUBE FITTINGS 1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC
1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC LET-LOK TUBE FITTINGS DESCRIPTION HAM-LET LET-LOK HOW DOES IT WORK? HAM-LET LET-LOK LET-LOK LET-LOK HAM-LET LET-LOK 1 4 3 2 4 Tube 1 2 3 1 2 3 4 6 LET-LOK
More informationBALL VALVE ASSEMBLY AND MAINTENANCE PROCEDURE. REF. DOC.MMM900N Rev.1 March 2014 SERIES M DIN / ANSI. Page 1 of 17
SERIES M DIN / ANSI Page 1 of 17 REVIEW CONTROL PROCEDURE REF.DOC.MMM900N REV. DATE CARRIED OUT BY APPROVED BY DESCRIPTION 0 12/05/2013 E.Hidalgo J.Tejedor Initial Edition 1 27/03/2014 D.Grau J.Tejedor
More informationTechnical Standard. API6D Ball & Plug Valve. Inspection & Test Procedure
Technical Standard API6D Ball & Plug Valve Inspection & Test Procedure 1 Scope This standard provides specific inspection items to be performed on all ball & plug valves. The valves shall be provided with
More informationContinental Industries TRANSITION FITTINGS or FAX Visit
Continental Industries TRANSITION FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
More informationMagnetic level switch type MR783 Instruction Manual
Magnetic level switch Magnetic level switch type MR783 1. DESCRIPTION page 3 1.1 Operation page 3 1.2 Application page 3 1.3 Description page 3 2. SPECIFICATIONS page 3 2.1 Service Conditions page 4 2.2
More informationHigh Pressure Equipment Taper Seal Valves, Fittings and Tubing
igh quipment Taper Seal Valves, ittings and Tubing 0,000 and,000 psi service igh quipment Company has developed the Taper Seal line of products to assure safe and easy plumbing through,000 psi. These needle
More informationUn-Pressurized Orefice Fittings FIO EZ. Parts List and Operation Instructions TECHNICAL MANUAL. Dn 2-6 Class Lbs
Un-Pressurized Orefice Fittings FIO EZ Parts List and Operation Instructions TECHNICAL MANUAL Dn 2-6 Class 150-600 Lbs US US 2 FIO EZ - MT 108-US - 05-2016 FIO EZ Important Instructions US Pietro Fiorentini
More informationBinks SG-2 Plus TM 2 QT. PRESSURE CUPS Model No (Standard) Model No (with OscillatingAgitator)
INTRODUCTION Binks SG-2 Plus TM Pressure Cup is ideal for component spraying and industrial applications where small batch production spraying is required. The 2 qt. capacity is sufficient to complete
More informationTerminals. 1 Han 8U plug. 2 plugs AC 230 V AC/DC 24 V. 180 Fig. 1/32 Connection diagram. Ordering data Order No. of transmitter Order code 1 )
SITRNS P Supplementary electronics for four-wire connection escription y direct connection of the supplementary electronics to a SI- TRNS P transmitter, a transmitter for four-wire connection is produced.
More informationCOMMERCIAL. MK Series High Performance Butterfly Valve Specifications. Hot Water, Chilled Water, Condenser Water, Steam
OMMRIL MK Series igh Performance utterfly Submittal/Technical ata ray MK Series igh Performance utterfly Valves NSI lass 150 and 300 ray ontrols ommercial ivision 13788 West Road, Suite 200 ouston, Texas
More informationENGINEERING TECHNICAL REPORT
SSP DUOLOK FITTINGS ON 1.000 x 0.139 WALL 316SS TUBING ENGINEERING TECHNICAL REPORT SSP 8250 Boyle Parkway Twinsburg, Ohio 44087 U.S.A. mysspusa.com 1.330.425.4250 1 TABLE OF CONTENTS 1.0 Introduction
More informationGAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS
GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS CONTINENTAL INDUSTRIES, INC. The Ultimate Connection CONTINENTAL INDUSTRIES, INC. ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, Inc.,
More informationL21S/SR/ST Glass Level Gauges
L21S/SR/ST Glass Level Gauges Doc. no.: 150, en_cat_l21s/sr/st, 12/2014 Type of code Example: L21ST/1450/AANSI 3/4 150Lb RF/Large chamber Code 1 Basic type L21 2 Type of gauge S Tubular level gauge SR
More informationPiston Accumulators Series Catalog ontents
atalog 1630-7ontents Piston ccumulators Series 3000 Series 3000 Piston ccumulators Heavy uty Service with 3000 PSI Operating Pressure 2" thru 12" ores with Over 50 Standard apacities Patented V-O-ring
More informationTECHNICAL DATA OBSOLETE
April 9, 2009 Preaction 326a 1. DESCRIPTION Viking supervised Double-Interlocked Electric/Pneumatic Release Preaction Systems utilizing the Viking G-4000P Deluge Valve. The small profi le, lightweight,
More informationHigh Pressure Tube Unions
High Pressure Tube Unions DILO. Sustainably tight. Made in Germany I am totally convinced by the high safety level even under extreme pressure. Christian Komm, Siemens AG, Power Generation DILO High pressure
More informationACCREDITED. Function. series 5360/
Pressure reducing valves series 360-36 - 36-366 RIT ISO 900 FM 6 LFFI 06/7 G replaces dp 06/0 G Function Pressure reducing valves are devices which, when installed on a private plumbing system, reduce
More informationMaterials : Carbon steel ASTM A216 WCB
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 400 ( NPS 2" to 16" ) Flanges R.F. Class 150 (PN20) - 29 C + 425 C Max Pressure : 20 Bars Specifications : Removable stainless
More informationE28/Q28 Safety Exhaust Valve Externally Monitored
E8/Q8 Safety Exhaust Valve Externally Monitored ulletin 9EM4 the total systems approach to air preparation Features Externally Monitored Safety Exhaust Valve Function When applications demand a safe environment
More informationType Cronos Pressure Reducing Regulator
Type Cronos Pressure Reducing Regulator March 2002 E0838 Figure 1. Type Cronos Regulator Features! Control ccuracy Keeps constant inlet pressures to downstream equipment by accurately controlling system
More informationMark 958 Series (3/4" - 1") Sanitary Gas Back Pressure Regulators
Mark 958 Series Sanitary Gas Back Pressure Regulators (3/4" - 1") The Mark 958 Sanitary Gas Back Pressure Regulator is the ideal valve for low back pressure gas regulation for blanketing, motive force,
More informationBronze Fittings & Flanges Brass Nipples
CORPORTE OFFICE TEL (800) 766-0076 LOCL (323) 890-4455 FX (323) 890-4456 WWW.SMITHCOOPER.COM ronze Fittings & Flanges rass Nipples 125 lb ronze Threaded Fittings 90 Elbow 1/8 36E 1001C 0.54 - - 0.078 50
More informationContinental Industries STEEL SERVICE TEES or FAX Visit
Continental Industries STEEL SERVICE TEES 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
More informationMODEL UM UNIVERSAL MANIFOLD ASSEMBLY (With or Without Control Valve) 1¼", 1½", 2", 2½", 76.1mm, 3", 4", 6",165.1mm, 8"
4077 Airpark Dr. Standish, MI 48658 989-846-4583 www.globesprinkler.com Technical Support 989-414-2600 techservice@globesprinkler.com MODEL UM UNIVERSAL MANIFOLD ASSEMBLY (With or Without Control Valve)
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationSCF Enviro-Friendly. Back-up Ring. Endcap. #7141 (for both) O-Ring. Back-up ring and O-ring fit onto end cap.
Extraction Parts 5mL - 50mL Closure Nut Male Fitting #7943 (2 required) Metal Frits #7942 (2 required) Endcap Back-up Ring O-Ring #7141 (for both) Body The components shown are the parts of a complete,
More informationTECHNICAL DATA. Q = C v P S
January 6, 2012 Preaction 347a 1. Description Viking supervised Double-Interlocked Electric/Pneumatic Release Preaction Systems utilize the Viking G-6000P Valve. The small profile, lightweight, pilot operated
More informationBiconic Connectors and Accessories
Phone 800/426 8688 Fax 800/626 0329 3 Biconic Connectors and Accessories The Biconic connector is a conical connector widely used throughout the telecommunications industry. Biconic couplings and attenuators
More informationProportional Relief Valves
Proportional Relief ValvesR Series 1 www.swagelok.com Proportional Relief Valves R Series Liquid or gas service Set pressures from 10 to psig (0.7 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections
More informationDifferential Pressure Regulator Type Type 45-6 (0.1 to 1 bar, DN 15) Mounting and Operating Instructions EB 3226 EN
Differential Pressure Regulator Type 45-6 Type 45-6 (0.1 to 1 bar, DN 15) Mounting and Operating Instructions EB 3226 EN Edition March 2008 Contents Contents Page 1 Design and principle of operation...................
More informationProduct Test Report F.A. Lennon Drive December 2015 Solon, Ohio U.S.A. Page 1 of 7. Valve Series Description Test Pressure Test Qty.
Product Report Solon, Ohio 44139 U.S.A. Page 1 of 7 TITLE Fugitive and Seat Leakage Performance Type of Swagelok VB05 Block and Bleed Process Interface Valves Witnessed by a Third Party PRODUCT TESTED
More informationGas delivery systems. How to ensure uninterrupted high quality gas delivery from the source to the apparatus? Dr. Gastons Vereskuns Trakai,Lithuania
Gas delivery systems. How to ensure uninterrupted high quality gas delivery from the source to the apparatus? Dr. Gastons Vereskuns Trakai,Lithuania May 7, 2014 What it is gas delivery system? It is a
More information