2013 Premium Connections

Transcription

1 2013

2 Table of Contents 1. Introduction Quality and Manufacturing 2 2. TMK Application Guide Options Tubing Connections. Integral ULTRA FX 12 Tubing Connections. Threaded and Coupled TMK FMT Tubing Drill string 24 TMK TDS 25 Casing Connections. Integral TMK 1 Integral 27 ULTRA-FJ 32 ULTRA-SF 38 TMK GF 46 TMK PF 58 TMK PE ET Extreme Torque 70 TMK FMC 78 TMK CS 86 TMK TTL-1 92 ULTRA-CX 98 ULTRA-QX Threaded and Coupled without metal to metal seals TMK CWB 109 ULTRA-DQX API Pressure Recoended Running Procedures Recoended Running Procedures for TMK brand connections Recoended Running Procedures for ULTRA brand connections Metric Units Conversion 134 The information presented herein is intended for use by industry professionals, using their own knowledge, experience and expertise. Although we have endeavored to provide accurate information and calculations, such information may be subject to change or correction, and OAO TMK and its affiliates take no responsibility for the reliance on or use of any information contained herein OAO TMK, all rights reserved

3 1. Introduction TMK is one of the largest producers of high quality steel pipe for the oil and gas industry. As the industry continues to evolve, many applications require directional and horizontal drilling in HTHP environments that push the performance envelope of conventional API threads. TMK supplies customers with some of the strongest premium connections backed by extensive technical support. Understanding the changing dynamics in the world s oil and gas market, TMK entered the U.S. market in 2008 with the acquisition of the IPSCO tubular group, which included the former NS Group. Referred as TMK IPSCO, the company has eleven premier manufacturing facilities spread throughout the U.S. The facilities produce seamless/erw OCTG and the ULTRA line of premium connections which include the ULTRA-FJ, ULTRA SF, ULTRA-FX, ULTRA-CX, ULTRA-QX and ULTRA- DQX. ULTRA premium connections are internationally recognized for their superior strength in extended reach HTHP wells and have been used extensively in North America. In addition to the ULTRA line of premium connections, TMK also offers its own group of premium connections including the TMK-GF, TMK-PF, TMK-PF ET, TMK-FMC, TMK-CS, TMK-TTL-01, TMK-1 and TMK-FMT. We offer unparalleled value for our customers, through the strength of more than twenty manufacturing facilities strategically located in the key energy producing areas of the world.

4 2 3 Quality and Manufacturing 2. TMK TMK is coitted to quality and holds Quality Management System certificate ISO 9001:2000 for all of its manufacturing operations. Strict quality control systems are applied at all TMK facilities. Each TMK employee is focused on producing high quality products. The quality control procedures include step by step quality control and daily process and production audits, as well as pipe traceability systems during manufacturing. In addition to its highly qualified production and technical specialists, TMK has a group of experienced engineers that are always ready to assist customers with TMK and ULTRA premium connection matters. Delivery Network Services TMK has built an efficient global production and distribution network to cost-effectively serve our customers in even the most remote locations. Our worldwide production and distribution facilities are strategically located to ensure on-time delivery of our entire product line. Technical Policy TMK s technical policy demonstrates its coitment to satisfy customers with high quality products. TMK is also coitted to innovation and seeks to create a new generation of products that will help its customers achieve better results.

5 Application Guide Outstanding tension, compression, bending and torsional strength ensure that the TMK Premium connections perform in the most challenging of deviated wells. Both the Integral and Threaded and Coupled connections are designed for the most challenging of well designs. Features Tension and Compression TMK Premium s patented thread forms are designed to take the heavy loading applied to both deep vertical wells and horizontal extended reach wells. TMK Premium s Integral Joint Connections exhibit tension and compression strengths ranging from 70% to 90% of the pipe body strength. The Threaded and Coupled connections exhibit 100% pipe body strength. TMK Premium s connections are subjected to the rigorous ISO test program to ensure the strength of the connection. Differing well designs and conditions determine the criteria needed to ensure high performance in the well. 2.1 Application Guide Bending In highly deviated horizontal wells, bending of the well string becomes critical to ensure successful completion. The ability of the TMK Premium patented thread designs to withstand the stresses, combined with the use of metal-metal seals, guarantees gas tightness and performance strength. Torsional Strength Rotation of the well string in deviated wells with long laterals has increased the need for connections with exceptionally high resistance to torsional overload. The TMK PF-ET and the ULTRA SF are two examples where high torsion strength, high tension and compression strength and the ability to withstand high bend radii, results in a full package solution to complex well designs. pic. 1 pic TMK

6 TMK Premium Connection Application Guide 2.1 Application Guide Production Tubing ULTRA PREMIUM CONNECTIONS Application Guide TMK PREMIUM CONNECTIONS Threaded and Coupled Special Clearance Threaded and Coupled ULTRA ULTRA ULTRA ULTRA ULTRA ULTRA -QX -DQX -CX(T&C) -FJ -SF -FX TMK TMK TMK TMK TMK PF PF ET GF FMC FMT TMK CWB TMK CS TMK TTL-01 Special Clearance TMK-1 WELL APPLICATION Production Casing, Liners, Tie-Backs Intermediate Casing Surface Casing Production Tubing/Casing Gas Tight HPHT & DEEP WELLS Rotating Liner/Casing TECHNICAL APPLICATION HIGH TORQUE APPLICATIONS Production Casing, & Tie-Backs + Heavy Wall Intermediate Casing & Tie-Backs + Heavy Wall Drilling with Casing Rotation while Cementing Frac String + High Compression Drilling with Tubing + High Compression SPECIAL APPLICATIONS Water Injection + Plastic/Glass Coating Injection Wells + Steam 2. TMK

7 Options 2.2 Options Special Clearance The connections can be supplied with special clearance couplings with smaller outside diameters. In this case, the area of the critical coupling cross section is less than the area of the critical pin cross section (pic 3). To ensure adequate strength, the special coupling should be a higher grade than the pin. Options OD, 168,28 (168,3*) Wall Thickness, Grade J55, К55 Grade N80, L80 Special s Grade Grade C95 7,3 (7,32*) N80,L80 C95 P110-8,94 (8,9*) N80,L80 P ,59 (10,6*) C Grade P ,06 (12,1*) C ,05 (8,1*) N80, L80 C95 P110 - Regular Special Critical Cross Section 177,80 (178,8*) 9,19 (9,2*) N80, L80 P ,36 (10,4*) C ,51 (11,5*) C ,65 (12,7*) P ,33 (8,3*) N80, L80 C ,52 (9,5*) N80, L80 C Critical Cross Section pic ,68 (193,7*) 10,92 (10,9*) N80, L80 P ,70 (12,7*) N80, L ,27 C ,11 (15,1*) C OD, Wall Thickness, Grade J55, K55 Grade N80, L80 Special s Grade Grade C95 Grade P ,08 (219,1*) 8,94 (8,9*) N80, L80 C95 P110-10,16 (10,2*) N80, L80 C95 P110-11,43 (11,4*) N80, L80 P ,70 (12,7*) N80, L ,30 (114,3*) 127,00 (127,0) 7,37 (7,4*) N80, L80 C95 P110 Q125 8,56 (8,6*) N80, L80 P ,52 (7,5*) N80, L80 C95 P110-9,19 (9,2*) N80, L80 P ,10 C95 -** ,14 P ,70 P ,48 (244,5*) 14,15 (14,2*) C ,94 (8,9*) N80, L80 C95 P110-10,03 (10,0*) N80, L80 C95 P110-11,05 (11,1*) N80, L80 P ,99 (12,0*) N80, L80 P ,84 (13,8*) C ,11 C ,98 (7,0*) N80, L80 C95 P ,70 (139,7*) 7,72 (7,7*) N80, L80 C95 P110-9,17 (9,2*) N80, L80 P ,54 (10,5*) C ,00 (7,0*) N80, L80 C ,70 (7,7*) N80, L80 C Selecting Make-up Torque for Pipes with Special s 146,1* 8,50 (8,5*) N80, L80 P When applying special couplings of the same grade as the pipe, make-up torque should be 15% less than the make-up 9,50 (9,5*) N80, L80 P torque for a standard coupling. Torque values for standard couplings are provided in the tables of mechanical properties 10,70 (10,7*) C for each connection. When the special coupling is one grade higher than the pipe being used, the torque is 10% less than the torque for a stan- Note: * according to Russian standards ** impossible to achieve connection strength balance dard coupling with the same grade as the pipe. In instances where a special coupling is two or more grades higher than the pipe used, the torque should be equal to the torque for a standard coupling of the same grade as the pipe. 2. TMK

8 Special Bevel Tubing Connections. Integral Options Upon request, couplings can be produced with a 20 Special Bevel that reduces down hole hang-ups and provides for smoother running (pic 4). When using couplings with the special bevel, spiders and slip elevators must be used for running a casing string. Standart Bevel Special Bevel 20 pic. 4 TMK Phosphate Coating Upon request, TMK Premium Services can apply a phosphorous coating on pin ends. This coating provides extra protection from corrosion during delivery and long-term storage and protects from wearing during make-up. Connection Accessories In addition, TMK Premium Services supplies pup joints, crossovers and other equipment essential to reliable exploration and production. 2. TMK

9 TMK 2.3 ULTRA FX What makes the ULTRA-FX premium connection the 100% tubing connection with optimum clearance... ULTRA-FX premium connections have 100% pipe body strength in tension and compression ULTRA-FX premium connections have a pressure capacity that exceeds API minimum internal yield and collapse pressure ULTRA-FX premium connections have the smallest OD of any full-strength OCTG connection Tubing Connections. Integral Positive Torque Stop Exactly locates metal seals and threads Result: Connection performance and the connection is ideal for internally coated or lined tubing External Metal Seal Simple, reliable seal resists external pressure in excess of API Collapse Pressure Result: Pressure integrity FullContact Threads Stab Flanks contact at full engagement to distribute compressive loading throughout threads Result: Compression efficiency Reverse Angle Flank ( Hook Thread ) Positive Torque Stop External Metal Seal FullContact Threads Run-in/Run-out Threads Sphere-and-Cone Internal Metal Seal Result: High tension and bending capacity Run-in/Run-out Threads Complimentary Run-in/Run-out threads extend thread mating surfaces Result: Deep, easy stabbing and quick, easy make-up with no cross threading risk Result: Maximum critical section area Sphere-and-Cone Internal Metal Seal Radial interference develops seal contact pressure Result: External factors (axial loads, temperature, dope, make-up torque) do not affect seal performance Recoended Make-up Torque does not affect seal dimensions or contact pressure Result: Connection can be tripped multiple times Representative VME Graph ULTRA-FX Connection Pipe Body API Collapse 2. TMK

10 ULTRA-FX Product Suary: Pipe and Connection Data 2.3 Tubing Connections. Integral OD 2 3/8 2 7/8 3 1/ / /2 Weight Wall Thickness Pipe Body Connection J-55 L-80 T-95 P-110 Q-125 Drift Dia Dsn OD Dsn ID Make-up loss Average PBA ,653 1,311 72,100 10, ,900 15, ,500 18, ,200 20, ,900 23, ,602 1,485 81,600 10, ,800 14, ,100 17, ,300 20, ,600 23, ,612 1,702 93,600 10, ,100 15, ,600 18, ,200 21, ,700 24, ,352 1, ,200 10, ,700 15, ,000 18, ,400 20, ,700 23, ,681 2, ,600 10, ,200 15, ,200 18, ,200 21, ,200 24, ,992 2, ,300 10, ,800 15, ,200 18, ,700 21, ,200 24, ,313 2, ,700 10, ,800 15, ,600 18, ,500 21, ,300 24, ,892 2, ,200 10, ,300 15, ,300 17, ,400 20, ,500 23, ,862 2, ,200 10, ,400 15, ,400 18, ,400 20, ,400 23, ,675 3, ,600 10, ,100 15, ,700 18, ,200 21, ,700 24, ,704 4, ,100 10, ,800 15, ,000 18, ,300 21, ,500 24, ,017 3, ,100 10, ,400 15, ,800 18, ,200 21, ,600 24, ,870 3, ,500 10, ,300 15, ,700 18, ,000 21, ,300 24, ,304 3, ,400 10, ,000 15, ,400 18, ,800 21, ,100 24, ,159 4, ,500 10, ,000 15, ,500 18, ,000 21, ,500 24, ,493 3, ,500 10, ,400 15, ,700 18, ,100 21, ,400 24, ,851 3, ,000 10, ,500 15, ,800 17, ,100 20, ,400 23, ,042 3, ,000 10, ,400 15, ,300 18, ,100 20, ,000 23, ,506 4, ,700 10, ,500 15, ,900 18, ,400 21, ,900 24, ,858 4, ,900 10, ,600 15, ,800 18, ,900 21, ,100 24, ,035 4, ,800 10, ,800 15, ,700 18, ,700 21, ,600 24, ,660 5, ,600 10, ,200 15, ,700 18, ,300 21, ,800 24, ,119 5, ,400 10, ,400 15, ,200 18, ,900 21, ,700 24, ,244 6, ,600 10, ,100 15, ,700 18, ,200 21, ,800 24, ,377 6, ,400 10, ,900 15, ,300 18, ,800 21, ,300 24, ,764 6, ,500 10, ,200 15, ,600 18, ,000 21, ,500 24, ,943 7, ,900 10, ,600 15, ,200 18, ,800 21, ,400 24, ,401 4, ,500 10, ,000 15, ,000 18, ,100 21, ,200 24, ,264 4, ,300 10, ,000 15, ,900 18, ,700 21, ,500 24, ,799 5, ,200 10, ,700 15, ,600 18, ,500 21, ,400 24, ,301 6, ,600 10, ,200 15, ,200 18, ,200 21, ,100 24,100 Tubing Connections. Integral The performance properties given in these tables are calculated per API 5C3. Positive-Stop 90 outside torque shoulder makes ULTRA-FX ideal for coated or lined applications. = is based upon minimum material values and average pipe body Connection ( PE Wt / Ft ) ( 1.5 ) dimensions. Neither Minimum depth includes a 1.5 design nor include any Design factor however, does not consider bending, or Safety Factor. temperature, buoyancy or other load ULTRA-FX PC (Plastic Coated) ULTRA-FX GL (Glass Lined) considerations. 2. TMK

11 TMK 2.3 Tubing Connections. Threaded and Coupled 2.3 Tubing Connections. Threaded and Coupled TMK FMT Tubing Application Field TMK FMT is a tubing premium connection with extra gas tightness properties designed for vertical and directional wells with highly corrosive environments. Pitch 3,175 Ø 60,73 Pitch 4,233 Ø 89,114 γ h 1 : 16 α β ϕ Parallel line to the thread axis

12 ТМK FMT Tubing Dimensions Tubing Connections. Threaded and Coupled Design Description Thread Form TMK FMT has a trapezium thread profile with the following parameters: 2 1/2 and 2 7/8 OD pipes have pitch and taper 1:16; 3 1/2 and 4 1/2 OD pipes have pitch and taper 1:16; +10 stabbing flank provides trouble-free make-up and reduces cross-threading; +3 tension load flank for both diameters provides improved performance during tensile and bending stress. Cone-and-Cone Internal Metal Seal 30 internal metal-to-metal seal offers excellent sealing capacity under the most severe stresses. Sealing integrity retains its properties even after numerous make-ups and break-outs. Internal Torque Shoulder 15 internal torque shoulder provides effective protection against over torquing. Tubing Connections. Threaded and Coupled OD Weight Wall Thickness in lb/ft kg/m in 2 3/8 2 7/8 3 1/2 60,32 (60,3*) 73,02 (73,0*) 88,9 (88,9*) 4 101,6 Critical Area, 2 Critical Area, 2 ID, OD, Length, Drift Diameter, Make-up Loss, 4,6 6,85 0,19 4, ,0 73, ,34 70,77 6,4 9,52 (9,2*) 0,217 5,51 (5,5*) ,7 88, ,64 73,27 7,8 11,61 (11,4*) 0,276 7,01 (7,0*) ,7 88, ,64 73,27 8,6 12,8 0,308 7, ,7 88, ,02 73,27 7,7 11,46 0,216 5, ,0 108, ,76 83,27 9,2 13,69 (13,2*) 0,254 6,45 (6,5*) ,0 108, ,72 83,27 10,2 15,18 0,289 7, ,0 108, ,12 83,27 12,7 18,9 0,375 9, ,5 108, ,68 83,27 14,3 21,28 0,43 10, ,0 108, ,88 83,27 9,5 14,14 0,226 5, ,2 120, ,76 91,27 10,7-0,262 6, ,2 120, ,94 91,27 13,2 19,64 0,33 8, ,2 120, ,48 91,27 16,1 23,96 0,415 10, ,2 120, ,16 91,27 4 1/2 114,3 (114,3*) 12,6 18,75 0,271 6, ,8 132, ,32 93,27 15,2 22,62 0,337 8, ,8 132, ,27 21,5 32 0,5 12, ,8 132, ,72 93,27 Length Wall Thickness Make-Up Loss Critical Cross Section Pipe Cross Section I.D. Drift Diameter O.D. * according to Russian standards 2. TMK

13 ТМK FMT Tubing Mechanical Properties 2.3 Tubing Connections. Threaded and Coupled OD Weight Wall Thickness Strenght, кн Tubing Connections. Threaded and Coupled Internal Pressure, kh Min. Collapse Resistance, MPa in lb/ft kg/m in 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 2 3/8 2 7/8 3 1/ /2 60,32 (60,3*) 73,02 (73,0*) 88,9 (88,9*) 101,6 114,3 (114,3*) 4,6 6,85 0,19 4,83 318,4 463,7 550,2 636,7 724,5 811,4 869,4 53,1 77,4 91,8 106,2 120,9 135,4 145,0 55,9 81,3 96,6 111,5 123,8 135,4 142,9 6,4 9,52(9,2*) 0,217 5,51(5,5*) 443,1 645,3 765,7 886,1 1008,3 1129,3 1209,9 50,0 72,9 86,5 100,1 113,9 127,6 136,7 53,0 77,0 89,2 100,3 110,8 120,7 126,9 7,8 11,61(11,4*) 0,276 7,01(7,0*) 551,1 802,6 952,4 1102,1 1254,1 1404,6 1504,9 63,7 92,7 110,0 127,3 144,9 162,3 173,9 65,9 95,8 113,8 131,7 149,7 167,7 179,6 8,6 12,8 0,308 7,82 607,2 884,3 1049,3 1214,3 1381,7 1547,5 1658,1 71,0 103,5 122,8 142,1 161,6 181,0 194,0 72,6 105,6 125,4 145,2 165,0 184,7 197,9 7,7 11,46 0,216 5,49 545,4 794,3 942,5 1090,8 1241,1 1390,1 1489,4 41,0 59,7 70,8 81,9 93,2 104,4 111,9 41,2 54,3 61,2 67,2 72,5 77,0 79,5 9,2 13,69(13,2*) 0,254 6,45(6,5*) 633,3 922,4 1094,5 1266,6 1441,2 1614,2 1729,5 48,1 70,1 83,2 96,2 109,5 122,7 131,4 51,1 70,1 72,7 83,3 102,7 111,4 116,8 10,2 15,18 0,289 7,34 712,9 1038,3 1232,1 1425,8 1622,4 1817,0 1946,8 54,8 79,8 94,6 109,5 124,6 139,6 149,5 57,5 83,6 99,3 115,0 130,7 143,3 151,4 12,7 18,9 0,375 9,52 899,7 1310,4 1555,0 1799,5 2047,6 2293,3 2457,1 71,0 103,4 122,7 142,1 161,6 181,0 194,0 72,6 105,6 125,4 145,1 164,9 184,7 197,9 14,3 21,28 0,43 10, ,8 1476,6 1752,1 2027,7 2307,2 2584,1 2768,6 81,5 118,7 140,8 162,9 185,4 207,7 222,5 81,8 119,0 141,3 163,6 185,9 208,2 223,0 9,5 14,14 0,226 5,74 655,1 954,2 1132,2 1310,3 1490,9 1669,8 1789,1 37,5 54,6 64,8 74,9 85,3 95,5 102,3 35,3 45,4 50,4 54,5 57,8 60,3 61,4 10,7-0,262 6,65 751,8 1095,0 1299,3 1503,6 1710,9 1916,2 2053,1 43,4 63,2 75,0 86,8 98,8 110,6 118,6 45,4 60,6 68,7 76,2 82,8 88,8 92,3 13,2 19,64 0,33 8,38 930,1 1354,7 1607,5 1860,3 2116,7 2370,7 2540,1 54,7 79,7 94,5 109,4 124,5 139,4 149,4 57,5 83,5 99,2 114,9 130,4 143,0 151,1 16,1 23,96 0,415 10, ,8 1664,4 1975,0 2285,5 2600,6 2912,7 3120,7 68,8 100,2 118,9 137,6 156,6 175,4 187,9 70,6 102,6 121,9 141,1 160,4 179,6 192,5 12,6 18,75 0,271 6,88 880,0 1281,7 1520,9 1760,1 2002,7 2243,1 2403,3 39,9 58,1 69,0 79,8 90,9 101,8 109,0 39,5 51,7 58,0 63,5 68,2 72,0 74,1 15,2 22,62 0,337 8, ,9 1569,9 1862,8 2155,8 2453,0 2747,3 2943,5 49,7 72,3 85,8 99,3 113,0 126,6 135,6 52,6 76,5 88,1 98,9 109,2 118,9 124,9 21,5 32 0,5 12,7 1536,5 2237,8 2655,4 3072,9 3496,6 3916,2 4195,9 73,7 107,3 127,4 147,4 167,7 187,8 201,3 75,0 109,0 129,5 149,9 170,4 190,8 204,4 * according to Russian standards 2. TMK

14 TMK FMT Tubing Make-up Torque 2.3 Tubing Connections. Threaded and Coupled OD Weight Wall Thickness Make-up Torque, Nm / ft-lb Tubing Connections. Threaded and Coupled Make-up Torque, Nm / ft-lb 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi min opt max min opt max min opt max min opt max min opt max min opt max min opt max in lb/ft kg/m in Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb 2 3/8 2 7/8 3 1/2 60,32 (60,3*) 73,02 (73,0*) 88,9 (88,9*) 4,6 6,85 0,19 4, ,4 9,52(9,2*) 0,217 5,51(5,5*) ,8 11,61(11,4*) 0,276 7,01(7,0*) ,6 12,8 0,308 7, ,7 11,46 0,216 5, ,2 13,69(13,2*) 0,254 6,45(6,5*) ,2 15,18 0,289 7, /2 101,6 (102,0*) 114,3 (114,3*) 12,7 18,9 0,375 9, ,3 21,28 0,43 10, ,5 14,14 0,226 5, ,7-0,262 6, ,2 19,64 0,33 8, ,1 23,96 0,415 10, ,6 18,75 0,271 6, ,2 22,62 0,337 8, ,5 32 0,5 12, * according to Russian standards 2. TMK

15 TMK 2.4 Drill string 2.4 Drill string TMK TDS Application Field Double-shouldered high torque drill pipe connection TMK TDS can be made with both a right and left tool thread; a tool thread either to GOST or API Spec 7-2; a coon or increased length; a square shoulder or a taper one; a shank with a coon or increased OD for tools with ODs 161,9 and 168,3; a hardband or without it. Welded and Joints with Additional Internal Thrust TMK TDS For use during emergency activities, complicated geological conditions for well construction in well drilling with curving intensity. Pitch 6,35 Internal shoulder 1 : Parallel line to the thread axis

16 26 27 Casing Connections. Integral Casing Connections. Integral 2. TMK -1 Integral Application Field TMK 1 is an integral premium connection designed for liners of casing strings, used for the construction and repair of vertical wells with deviations up to 5 per 30 meters. 1:12 Pitch 4,233 1:12 α β Parallel line to the thread axis ϕ External schoulder

17 28 29 Design Description ТМK-1 Integral Dimensions Casing Connections. Integral Thread Form TMK 1 has a unique trapezium thread profile with pitch and taper 1:12, providing excellent gas tightness properties: +30 stabbing and compression load flank provides for easy stabbing, fast make-up and reduces cross threading; +3 tension load flank prevents the possibility of thread jump-out during sufficient tensile and bending loads. Cone-and-Cone Internal Metal Seal 1:12 radial internal metal-to-metal seal offers excellent gas tightness under the most severe stresses. Seal integrity keeps its properties even after numerous make-ups and break-outs. Internal Torque Shoulder 15 external and 90 internal torque shoulders provide effective protection against over torquing and additional sealing. Casing Connections. Integral OD Weight Wall Thickness in lb/ft kg/m in 4 101,6 4 1/2 114,3 (114,3*) 4 3/4 120,65 5 1/2 139,7 (139,7*) Critical Area, 2 Critical Cross Section, 2 Critical Cross Section, 2 ID, OD, Drift Diameter, Make-up Loss, 9,5 13,57 0,23 5, ,1 102,7 86,9 52,3 10,7 15,57(15,6*) 0,26 6,65(6,5*) ,3 102,7 85,1 52,3 12,6 18,23(18,2*) 0,27 6,88(7,0*) ,5 115,2 97, ,1 (22,3*) 0,337 8, ,2 115, ,23 (19,3*) 0,27 (6,90*) ,9 121,45 103, ,99 (22,3*) 0,315 (8,00*) ,7 121,45 101, ,5 22,85(22,9*) 0,275 6,98(7,0*) ,9 140,5 122, (25,1*) 0,304 7,72(7,7*) ,5 140,5 121,08 54 Wall Thickness Make-Up Loss Critical Cross Section Pipe Cross Section Critical Cross Section I.D. Drift Diameter O.D. * according to Russian standards 2. TMK

18 30 31 ТМK-1 Integral Mechanical Properties Casing Connections. Integral OD Weight Wall Thickness Strenght, кн Casing Connections. Integral Internal Pressure, kh Min. Collapse Resistance, MPa in lb/ft kg/m in 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 4 101,6 4 1/2 114,3 (114,3*) 4 3/4 120,65 5 1/2 139,7 (139,7*) 9,5 13,57 0,23 5, ,5 54,6 64,8 74,9 85,3 95,5 102,3 35,2 45,4 50,4 54,5 57,8 60,3 61,4 10,7 15,57(15,6*) 0,26 6,65(6,5*) ,4 63, ,8 98,8 110,6 118,6 45,4 60,6 68,7 76,1 82,8 88,8 92,3 12,6 18,23(18,2*) 0,27 6,88(7,0*) ,9 58, ,8 90,9 101,8 109,0 39,4 51,7 57,9 63,4 68, ,1 15,1 (22,3*) 0,337 8, ,6 72,3 85,8 99,3 113,0 126,6 135,6 52,5 76, ,8 109,2 118,9 124,9 13,23 (19,3*) 0,27 (6,90*) ,9 55,2 65,6 75,9 86,3 96,7 103, ,6 51,8 56,2 59,8 62,5 63,8 14,99 (22,3*) 0,315 (8,00*) , ,9 100,1 112,1 120,1 46,4 62,1 70,5 78,1 85,2 91,5 95,2 15,5 22,85(22,9*) 0,275 6,98(7,0*) ,1 48,3 57,3 66,3 75,4 84,5 90,5 27,8 34, ,7 40,5 42,5 43,5 17 (25,1*) 0,304 7,72(7,7*) ,6 53,3 63,3 73,3 83,4 93,4 100,1 33,8 43,3 47,8 51,5 54,4 56,3 57,1 ТМK-1 Integral Make-up Torque Make-up Torque, Nm / ft-lb Make-up Torque, Nm / ft-lb OD Weight Wall Thickness 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi min opt max min opt max min opt max min opt max min opt max min opt max min opt max in lb/ft kg/m in Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb 4 101,6 9,5 13,57 0,23 5, ,7 15,57(15,6*) 0,26 6,65(6,5*) /2 114,3 (114,3*) 12,6 18,23(18,2*) 0,27 6,88(7,0*) ,1 (22,3*) 0,337 8, /4 120,65 13,23 (19,3*) 0,27 (6,90*) ,99 (22,3*) 0,315 (8,00*) /2 139,7 (139,7*) 15,5 22,85(22,9*) 0,275 6,98(7,0*) (25,1*) 0,304 7,72(7,7*) * according to Russian standards 2. TMK

19 TMK ULTRA-FJ What makes the ULTRA-FJ premium connection the strongest flush- joint connection... ULTRA-FJ premium connections have the highest tensile efficiency of any true flush-joint casing connection ULTRA-FJ premium connections have compression efficiency equal to or greater than its tensile efficiency ULTRA-FJ premium connections have pressure ratings that exceed API minimum internal yield and collapse pressure Casing Connections. Integral Positive Torque Stop Exactly locates metal seals and threads Result: Reliability and connection performance External Metal Seal Simple, reliable seal resists external pressure in excess of API Collapse Pressure Result: Pressure integrity FullContact Threads Stab Flanks contact at full engagement to distribute compressive loading throughout threads Positive Torque Stop External Metal Seal FullContact Threads Run-in/Run-out Threads Sphere-and-Cone Internal Metal Seal Result: Compression efficiency Reverse Angle Flank ( Hook Thread ) Result: High tension and bending capacity Result: Deep, easy stabbing and quick, easy make-up Run-in/Run-out Threads Complimentary Run-in/Run-out threads extend thread mating surfaces Result: Deep, easy stabbing and quick, easy make-up with no cross threading risk Result: Maximum critical section area Sphere-and-Cone Internal Metal Seal Radial interference develops seal contact pressure Result: External factors (axial loads, temperature, dope, make-up torque) do not affect seal performance Recoended Make-up Torque does not affect seal dimensions or contact pressure Result: Connection can be tripped multiple times Representative VME Graph ULTRA-FJ Connection API Collapse Pipe Body 2. TMK

20 34 35 ULTRA-FJ Product Suary: Pipe and Connection Data OD Weight PE Weight Pipe Body Connection J-55 L-80 T-95 P-110 Q-125 Wall Thickness Drift Dia Average PBA Bored ID % Tensile Efficiency % Comprsn Efficiency Make-up loss 2 3/ % 70.1% ,000 7,300 65,300 71,300 10,700 83,600 84,700 12,700 92,900 98,100 14, , ,500 16, , % 71.1% ,600 7,400 86,000 93,900 10, , ,500 12, , ,200 14, , ,800 17, , % 68.0% ,100 7,100 87,500 96,200 10, , ,300 12, , ,300 14, , ,400 16, , / % 71.1% ,300 7, , ,100 10, , ,400 12, , ,600 14, , ,900 16, , % 72.1% ,100 7, , ,900 11, , ,100 13, , ,300 15, , ,600 17, , % 66.0% ,700 6, , ,400 10, , ,400 11, , ,400 13, , ,400 15, , / % 68.0% ,400 7, , ,800 10, , ,800 12, , ,900 14, , ,900 16, , % 71.1% ,400 7, , ,300 10, , ,600 12, , ,900 14, , ,200 16, , % 67.0% ,300 7, , ,100 10, , ,400 12, , ,600 14, , ,900 16, , % 66.9% ,500 7, , ,800 10, , ,900 12, , ,100 14, , ,200 16, , % 70.1% ,500 7, , ,600 10, , ,800 12, , ,000 14, , ,300 16, , % 72.1% ,300 7, , ,200 11, , ,400 13, , ,600 15, , ,700 17, , % 76.2% ,300 8, , ,200 11, , ,400 13, , ,600 16, , ,800 18, , % 65.9% ,400 6, , ,800 10, , ,800 11, , ,900 13, , ,900 15, , % 67.0% ,000 7, , ,600 10, , ,300 12, , ,100 14, , ,800 16, , / % 68.0% ,900 7, , ,500 10, , ,700 12, , ,900 14, , ,000 16, , % 73.1% ,000 7, , ,700 11, , ,900 13, , ,100 15, , ,300 17, , % 73.8% ,200 7, , ,400 11, , ,000 13, , ,500 15, , ,000 17, , % 66.9% ,500 7, , ,100 10, , ,100 12, , ,000 14, , ,000 16, , % 66.9% ,100 7, , ,800 10, , ,000 12, , ,300 14, , ,500 16, , % 73.1% ,000 7, , ,200 11, , ,700 13, , ,100 15, , ,600 17, , % 75.2% ,600 7, , ,600 11, , ,400 13, , ,200 15, , ,000 17, , % 77.3% ,800 8, , ,000 11, , ,800 14, , ,700 16, , ,600 18, , % 78.2% ,200 8, , ,900 11, , ,700 14, , ,500 16, , ,300 18, , % 79.4% ,200 8, , ,100 12, , ,200 14, , ,400 16, , ,500 18, , % 65.9% ,700 6, , ,400 10, , ,900 11, , ,500 13, , ,100 15, , % 66.9% ,200 7, , ,200 10, , ,800 12, , ,500 14, , ,100 16, , % 68.0% ,600 7, , ,200 10, , ,200 12, , ,200 14, , ,200 16, , / % 71.0% ,800 7, , ,700 10, , ,700 12, , ,700 14, , ,600 16, , % 75.2% ,200 7, , ,000 11, , ,700 13, , ,400 15, , ,100 17, , % 76.3% ,500 8, , ,700 11, , ,400 13, , ,100 16, , ,800 18, , % 78.3% ,300 8, , ,900 11, , ,800 14, , ,700 16, , ,600 18, , / % 68.0% ,000 7, , ,100 10, , ,100 12, , ,100 14, , ,100 16, , % 65.9% ,600 6, , ,800 10, , ,000 11, , ,300 13, , ,600 15, , % 70.0% ,500 7, , ,400 10, , ,700 12, , ,000 14, , ,400 16, , % 71.1% ,300 7, , ,800 10, , ,700 12, , ,700 14, , ,600 17, , % 74.2% ,900 7, , ,500 11, , ,700 13, , ,900 15, , ,100 17, , % 76.2% ,200 8, , ,400 11, , ,900 13, , ,400 16, , ,000 18, , % 77.2% ,200 8, , ,700 11, , ,600 14, , ,500 16, ,600 1,032,400 18,400 1, 077,100 Casing Connections. Integral

21 36 37 ULTRA-FJ Product Suary: Pipe and Connection Data OD Weight PE Weight Pipe Body Connection J-55 L-80 T-95 P-110 Q-125 Wall Thickness Drift Dia Average PBA Bored ID % Tensile Efficiency % Comprsn Efficiency Make-up loss % 64.9% ,800 6, , ,800 9, , ,200 11, , ,600 13, , ,100 15, , % 69.0% ,400 7, , ,300 10, , ,600 12, , ,900 14, , ,200 16, , / % 72.1% ,100 7, , ,100 11, , ,700 13, , ,300 15, , ,900 17, , % 75.2% ,700 7, , ,000 11, , ,200 13, , ,400 15, ,000 1,026,600 17,900 1,066, % 77.2% ,900 8, , ,900 11, , ,900 14, ,500 1,033,900 16,200 1,114,700 1,174,800 18,400 1,220, / % 77.2% ,500 8, , ,600 11, , ,900 14,000 1,011,300 1,109,100 16,200 1,194,700 1,260,300 18,400 1,308, / % 74.2% ,300 7, , ,300 11, ,00 878,000 13, ,900 1,016,600 15,600 1,086,800 1,155,200 17,700 1,192, % 71.1% ,000 7, , ,600 10, , ,800 12, , ,000 14, , ,200 17,000 1,018, / % 72.1% ,000 7, , ,000 11, , ,500 13, , ,100 15,100 1,030,200 1,104,600 17,200 1,133, % 74.2% ,500 7, , ,300 11, , ,700 13, ,900 1,081,100 15,600 1,145,800 1,228,600 17,700 1,260, % 76.2% ,200 8, , ,400 11,600 1,009,600 1,098,900 13,800 1,144,000 1,272,400 16,000 1,348,700 1,445,900 18,200 1,483, / % 79.3% ,800 8, ,100 1,124,100 12,100 1,223,300 1,334,900 14,400 1,387,200 1,545,700 16,600 1,634,900 1,756,500 18,900 1,798, % 64.5% ,100 6, , ,600 9, , ,500 11, , ,300 13, , ,200 15, , % 65.9% ,200 6, , ,400 10, , ,000 11, , ,500 13, ,300 1,046,000 15,700 1,065, / % 69.0% ,400 7, , ,600 10, , ,800 12, ,000 1,078,900 14,500 1,132,700 1,226,000 16,500 1,248, % 72.1% ,500 7, , ,100 11, ,600 1,066,600 13,100 1,101,200 1,235,000 15,100 1,296,500 1,403,400 17,200 1,429, % 75.2% ,000 7, ,500 1,025,400 11,500 1,105,800 1,217,700 13,600 1,257,200 1,410,000 15,800 1,480,200 1,602,300 17,900 1,631, % 75.2% ,300 7, ,200 1,114,600 11,500 1,202,300 1,323,700 13,600 1,366,800 1,532,700 15,800 1,609,300 1,741,700 17,900 1,773, % 67.0% ,700 7, , ,700 10, , ,100 12, , ,400 14,000 1,002,400 1,094,800 16,000 1,107, / % 70.0% ,200 7, , ,400 10, ,000 1,004,000 12,700 1,028,600 1,162,500 14,700 1,209,600 1,321,000 16,700 1,336, % 72.1% ,300 7, , ,600 11,000 1,038,900 1,156,200 13,100 1,184,700 1,338,700 15,100 1,393,200 1,521,300 17,200 1,538, % 74.1% ,800 7, ,200 1,089,200 11,300 1,162,300 1,293,400 13,400 1,325,300 1,497,600 15,600 1,558,600 1,701,800 17,700 1,721, / % 77.2% ,100 8, ,400 1,245,300 11,800 1,327,000 1,478,800 14,000 1,513,700 1,712,300 16,200 1,779,900 1,945,800 18,400 1,966, % 69.0% ,800 7, , ,100 10, , ,900 12,500 1,004,500 1,149,700 14,500 1,179,000 1,306,500 16,500 1,307, / % 70.0% ,300 7, , ,100 10,700 1,002,500 1,135,400 12,700 1,148,800 1,314,600 14,700 1,348,400 1,493,900 16,700 1,494, % 70.0% ,500 7, ,700 1,062,500 10,700 1,114,400 1,261,800 12,700 1,277,000 1,461,000 14,700 1,499,000 1,660,200 16,700 1,661, % 70.1% ,200 7, ,200 1,136,300 10,700 1,192,100 1,349,400 12,700 1,365,900 1,562,500 14,700 1,603,300 1,775,500 16,700 1,777, / % 76.2% ,044,400 8, ,000 1,519,100 11,600 1,589,300 1,804,000 13,800 1,822,400 2,088,800 16,000 2,138,600 2,373,700 18,200 2,371,700 Casing Connections. Integral The performance properties given in these tables are calculated per API 5C3. is based upon minimum material values and average pipe body dimensions. is based upon minimum ultimate strength of the material and the API Buttress formula. Neither Minimum nor include any design or safety factors. Connection = ( PE Wt / Ft ) ( 1.5 ) depth includes a 1.5 design factor however does not consider bending, temperature, buoyancy or other load considerations.

22 38 39 TMK 2. ULTRA SF What makes the ULTRA-SF premium connection the strongest semi-flush connection... ULTRA-SF premium connections have the highest tensile efficiency of any semi-flush casing connection ULTRA-SF premium connections have compression efficiency equal to or greater than its tensile efficiency ULTRA-SF premium connections have pressure ratings that exceed API minimum internal yield and collapse pressure Casing Connections. Integral FullContact Threads Stab Flanks contact at full engagement to distribute compressive loading throughout threads Result: Compression efficiency Reverse Angle Flank ( Hook Thread ) Result: High tension and bending capacity Locked Metal Center-Shoulder Seal Dual Frusto-Conical metal seals Result: API pipe body MIYP and collapse pressure Radial interference develops seal contact pressure Locked Metal Center- Shoulder Seal FullContact Threads Run-in/Run-out Threads Result: External factors (axial loads, temperature, dope, make-up torque) do not affect seal performance Tooth and groove design locks the two connection members together Result: Cyclic forces do not affect seal integrity and provide high torque strengh Positive-stop center-shoulder exactly locates metal seals and threads Result: Connection performance Run-in/Run-out Threads Complimentary Run-in/Run-out threads extend thread mating surfaces Result: Deep, easy stabbing and quick, easy make-up with no cross threading risk Result: Maximum critical section area Representative VME Graph ULTRA-SF Connection API Collapse Pipe Body 2. TMK

23 40 41 ULTRA-SF Product Suary: Pipe and Connection Data OD 4 1/ /2 6 5/8 7 Weight PE Weight Pipe Body Connection L-80 T-95 P-110 Q-125 Wall Thickness ID Drift Dia Average PBA Turned OD % Tensile Efficiency % Comprsn Efficiency Bored ID Make-up loss % 92.0% ,500 14, , ,400 16, , ,200 19, , ,100 22, , % 91.5% ,000 14, , ,700 16, , ,500 19, , ,200 22, , % 94.2% ,700 14, , ,000 17, , ,300 19, , ,600 22, , % 96.1% ,100 14, , ,900 17, , ,700 20, , ,400 23, , % 91.0% ,900 14, , ,800 16, , ,700 19, , ,600 21, , % 91.8% ,700 14, , ,900 16, , ,100 19, , ,300 22, , % 95.3% ,800 14, , ,000 17, , ,200 20, , ,500 22, , % 92.6% ,200 14, , ,700 16, , ,100 19, , ,600 22, , % 93.0% ,500 14, , ,800 17, , ,200 19, , ,500 22, , % 93.2% ,100 14, , ,400 17, , ,600 19, , ,900 22, , % 94.0% ,800 14, , ,100 17, , ,400 19, , ,600 22, , % 94.2% ,000 14, , ,500 17, , ,900 20, , ,400 22, , % 92.8% ,100 14, , ,000 16, , ,900 19, , ,800 22, , % 92.6% ,500 14, , ,200 16, , ,800 19, , ,400 22, , % 95.0% ,200 14, , ,200 17, , ,300 20, , ,300 22, , % 96.2% ,600 14, , ,400 17, , ,200 20, , ,000 23, , % 94.2% ,200 14, , ,600 17, , ,900 20,00 882, ,300 22, , % 89.2% ,000 13, , ,900 16, , ,900 18, , ,800 21,500 1,012, % 94.1% ,600 14, , ,900 17, , ,200 19, , ,500 22, , % 95.4% ,900 14, , ,400 17, , ,000 20, , ,500 23,000 1,000, % 97.3% ,600 15, , ,500 17, , ,400 20,600 1,053,900 1,099,300 23,400 1,152, % 93.9% ,800 14, , ,300 17, , ,800 19,900 1,066,600 1,112,200 22,600 1,166, % 92.6% ,700 14, , ,400 17, ,100 1,010,200 19,600 1,101,000 1,147,900 22,300 1,204, % 93.2% ,000 14, , ,600 17, ,400 1,082,100 19,800 1,179,400 1,229,700 22,500 1,289, % 94.1% ,700 14, ,00 585,100 17, , ,500 19, , ,900 22, , % 93.3% ,600 14, , ,600 17, , ,600 19, , ,600 22, , % 95.2% ,600 14, , ,400 17, , ,200 20, , ,100 22,900 1,035, % 98.8% ,900 15, , ,900 18, , ,800 20,900 1,082,300 1,132,700 23,800 1,184, % 94.9% ,000 14, , ,700 17, ,600 1,046,400 20,100 1,136,600 1,189,100 22,900 1,243, % 94.6% ,800 14, , ,200 17, ,500 1,124,500 20,100 1,221,600 1,277,900 22,800 1,336, % 96.4% ,800 14,900 1,014,600 1,073,300 17, ,000 1,242,700 20,500 1,349,900 1,412,200 23,300 1,477, % 96.7% ,700 14,900 1,071,700 1,133,700 17, ,300 1,312,700 20,500 1,425,900 1,491,700 23,300 1,560, % 91.9% ,700 14, , ,600 16, , ,600 19, , ,500 22, , % 92.9% ,500 14, , ,600 17, , ,700 19, , ,800 22,400 1,016, % 93.9% ,800 14, , ,500 17, , ,300 19,900 1,067,700 1,123,100 22,600 1,170, / % 96.0% ,000 14, ,700 1,005,800 17, ,200 1,164,600 20,400 1,258,200 1,323,500 23,100 1,378, % 96.7% ,200 14,900 1,060,900 1,129,500 17, ,200 1,307,900 20,500 1,413,000 1,486,200 23,300 1,548, % 96.9% ,004,800 14,900 1,120,700 1,193,200 17, ,700 1,381,600 20,600 1,492,700 1,570,100 23,400 1,635, % 97.1% ,053,100 15,000 1,174,600 1,250,600 17, ,500 1,448,000 20,600 1,564,400 1,645,500 23,400 1,714, / % 95.5% ,007,800 14,700 1,122,800 1,196,800 17, ,400 1,385,700 20,300 1,495,700 1,574,700 23,000 1,639,300 Casing Connections. Integral

24 42 43 ULTRA-SF Product Suary: Pipe and Connection Data OD 8 5/8 Weight PE Weight Pipe Body Connection L-80 T-95 P-110 Q-125 Wall Thickness ID Drift Dia Average PBA Turned OD % Tensile Efficiency % Comprsn Efficiency Bored ID Make-up loss 32,00 31,10 0,352 7,921 7,875 9,184 8,823 91,5% 93,0% 7,905 5, ,900 14, , ,500 17, , ,100 19, , ,800 22, ,300 36,00 35,14 0,400 7,825 7,700 10,376 8,788 91,2% 92,7% 7,781 5, ,100 14, , ,500 16, , ,900 19, , ,300 22, ,600 40,00 39,29 0,450 7,725 7,625 11,603 8,853 93,2% 94,6% 7,690 5, ,500 14, , ,100 17, , ,600 20, , ,100 22, ,200 44,00 43,39 0,500 7,625 7,500 12,814 8,935 94,8% 96,2% 7,581 5, ,700 14, , ,100 17, , ,500 20, , ,000 23, ,800 49,00 47,99 0,557 7,511 7,386 14,175 8,945 96,3% 97,7% 7,467 6, ,900 15, , ,900 17, , ,900 20, , ,900 23, ,200 52,00 51,03 0,595 7,435 7,310 15,071 8,952 97,3% 98,6% 7,391 6, ,900 15, , ,900 18, , ,900 20, , ,900 23, ,500 54,00 53,40 0,625 7,375 7,250 15,771 8,956 97,8% 99,2% 7,331 6, ,200 15, , ,600 18, , ,100 21, , ,600 23, ,500 40,00 38,94 0,395 8,835 8,750 11,499 9,821 93,8% 95,3% 8,805 5, ,400 14, , ,600 17, , ,700 20, , ,900 22, ,600 43,50 42,69 0,435 8,755 8,625 12,608 9,837 92,0% 93,4% 8,71 5, ,800 14, , ,000 17, , ,300 19, , ,500 22, , /8 47,00 46,14 0,472 8,681 8,525 13,626 9,825 92,1% 93,5% 8,626 5, ,100 14, , ,600 17, , ,100 19, , ,700 22, ,800 53,50 52,85 0,545 8,535 8,500 15,608 9,983 96,7% 98,1% 8,523 6, ,500 15, , ,000 18, , ,500 20, , ,000 23, ,600 58,40 57,38 0,595 8,435 8,375 16,947 9,974 97,2% 98,6% 8,414 6, ,800 15, , ,900 18, , ,100 20, , ,200 23, , /8 62,80 61,74 0,625 8,625 8,500 18,235 10,194 96,5% 97,8% 8,581 6, ,100 15, , ,000 17, , ,000 20, , ,900 23, , /4 40,50 38,88 0,350 10,050 9,894 11,480 10,925 92,0% 93,5% 9,995 5, ,600 14, , ,400 17, , ,200 19, , ,000 22, ,900 45,50 44,22 0,400 9,950 9,875 13,057 10,941 91,7% 93,1% 9,924 5, ,800 14, , ,700 17, , ,500 19, , ,400 22, ,000 51,00 49,50 0,450 9,850 9,694 14,618 10,959 91,9% 93,3% 9,795 5, ,200 14, , ,900 17, , ,500 19, , ,200 22, ,700 55,50 54,21 0,495 9,760 9,604 16,010 11,963 93,0% 94,4% 9,705 6, ,500 14, , ,900 17, , ,400 20, , ,900 22, ,000 60,70 59,40 0,545 9,660 9,504 17,542 11,054 94,5% 95,9% 9,605 6,515 1,320,600 14, , ,200 17, , ,800 20, , ,400 23, ,800 65,70 64,53 0,595 9,560 9,500 19,058 11,104 96,8% 98,1% 9,539 6, ,600 15, , ,100 18, , ,700 20, , ,200 23, ,100 60,00 58,81 0,489 10,772 10,625 17,367 11,959 92,1% 93,5% 10,721 6, ,900 14, , ,000 17, , ,000 19, , ,100 22, , /4 65,00 63,97 0,534 10,682 10,625 18,890 12,097 95,4% 96,8% 10,662 6, ,900 14, , ,100 17, , ,400 20, , ,600 23, ,300 71,00 69,42 0,582 10,586 10,430 20,500 12,076 96,7% 98,0% 10,531 6, ,900 15, , ,900 18, , ,000 20, , ,000 23, , /8 71,80 70,19 0,582 10,711 10,625 20,730 12,194 94,1% 95,4% 10,681 6, ,300 14, , ,700 17, , ,200 20, , ,600 23, ,200 61,00 59,45 0,430 12,515 12,359 17,555 13,609 93,9% 95,3% 12,460 5, ,100 14, , ,300 17, , ,600 20, , ,800 23, , /8 68,00 66,10 0,480 12,415 12,259 19,521 13,599 93,4% 94,8% 12,360 6, ,000 14, , ,500 17, , ,900 20, , ,400 22, ,600 72,00 70,60 0,514 12,347 12,250 20,849 13,720 95,6% 97,1% 12,313 6, ,000 15, , ,900 17, , ,800 20, , ,800 23, , /8 88,20 86,78 0,625 12,375 12,250 25,626 13,972 96,1% 97,5% 12,331 6, ,000 15, , ,300 17, , ,400 20, , ,500 23, ,600 Casing Connections. Integral The performance properties given in these tables are calculated per API 5C3. is based upon minimum material values and average pipe body dimensions. is based upon minimum ultimate stregnth of the material and the API Buttress formula. Neither Minimum nor include any design or safety factors. Connection = ( PE Wt / Ft ) ( 1.5 ) depth includes a 1.5 design factor however does not consider bending, temperature, buoyancy or other load considerations.

25 TMK 2. TMK Casing Connections. Threaded and Coupled 2. TMK

26 TMK GF Application Field TMK GF is a premium connection with extra gas tightness properties used for the construction and operation of directional and horizontal wells with excessive concentration of CO 2 and H 2 S. cone γ Pitch 5,08 Design Description Thread Form The connection has a hooked thread profile with pitch 5.08 and taper 1:16; +24 stabbing and compression load flank provides for easy stabbing, fast make-up and reduces cross threading; -4 tension load flank prevents the possibility of thread jump-out, reduces thread radial tension and improves wearing resistance and make-up properties of the connection. The tensile strength of the connection is nearly equal to the tensile strength of the pipe body. Sphere-and-Cone Internal Metal Seal +15 internal metal-to-metal seal offers excellent gas tightness even under the most severe stresses. Seal integrity keeps its properties even after numerous make-ups and break-outs due h m h t h t < h m to fast Run-in/Run-out in the contact area. sphere ϕ α β Parallel line to the thread axis 1 : Internal Torque Shoulder +15 internal shoulder consists of pin and box conical surfaces and ensures an additional sealing barrier and provides effective protection against over torquing. Both radii of the thread cross sections are spaced to obtain contact with the straight part of the thread bearing face in order to improve wear resistance and abrasive wear resistance of the thread when made-up/broken-out. Optimized gapping between pin and box load flanks improves resistance to compression load and prevents damage to the seal. Length Wall Thickness Make-Up Loss Critical Cross Section Pipe O.D. Pipe I.D. Critical Cross Section Pipe Cross Section I.D. Drift Diameter O.D. 2. TMK

27 48 49 TMK GF Dimensions TMK GF Dimensions OD Weight Wall Thickness in lb/ft kg/m in 4 1/2 114,30 (114,3*) 5 5 1/2 127,00 (127,0*) 139,70 (139,7*) Critical Area, 2 Critical Area, 2 ID, OD, Length, Drift Diameter, Make-up Loss, 13,50 20,09(19,4*) 0,290 7,37(7,4*) , ,39 106,71 15,10 22,47(22,3*) 0,337 8,56(8,6*) , ,01 106,71 15,00 22,32(22,1*) 0,296 7,52(7,5*) ,2 141, ,79 109,88 18,00 26,79(26,7*) 0,362 9,19(9,2*) ,2 141, ,45 109,88 21,40 31,85 0,437 11, ,2 141, ,63 109,88 23,20 34,53 0,478 12, ,2 141, ,55 109,88 24,10 35,86 0,500 12, ,2 141, ,43 109,88 15,50 23,07(22,9*) 0,275 6,98(7,0*) ,7 153, ,57 111,47 17,00 25,30(25,1*) 0,304 7,72(7,7) ,7 153, ,09 111,47 20,00 29,76(29,5*) 0,361 9,17(9,2*) ,4 153, ,19 111,47 23,00 34,23(33,60*) 0,415 10,54(10,5*) ,4 153, ,45 111,47 16,13 (24,0*) 0,275 (7,0*) , ,93 112,53 OD Weight Wall Thickness in lb/ft kg/m in 8 5/8 9 5/8 219,08 (219,1*) 244,48 (244,5*) Critical Area, 2 Critical Area, 2 ID, OD, Length, Drift Diameter, Make-up Loss, 32,00 47,62(46,3*) 0,352 8,94(8,9*) ,3 244, ,03 132,13 36,00 53,57(52,3*) 0,400 10, ,3 244, ,59 132,13 40,00 59,53(58,5*) 0,450 11,43(11,4*) , ,05 132,13 44,00 65,48(64,6*) 0,500 12,70(12,7) , ,51 132,13 49,00 72,92(71,5*) 0,557 14,15(14,2*) ,2 244, ,61 132,13 36,00 53,57(51,9*) 0,352 8,94(8,9*) ,6 269, ,63 132,13 40,00 59,53(58,0*) 0,395 10,03(10,0*) ,6 269, ,45 132,13 43,50 64,73(63,6*) 0,435 11,05(11,1*) ,1 269, ,41 132,13 47,00 69,94(68,7*) 0,472 11,99(12,0*) ,1 269, ,53 132,13 53,50 79,62(78,7*) 0,545 13,84(13,8*) ,3 269, ,83 132,13 - (146,1*) 6 5/8 168,28 (168,3*) 17,61 (26,2*) 0,303 (7,7*) , ,53 112,53 19,35 (28,8*) 0,334 (8,5*) , ,93 112,53 21,50 (32,0*) 0,374 (9,5*) , ,93 112,53 23,99 (35,7*) 0,421 (10,7*) , ,53 112,53 20,00 29,76(29,0*) 0,288 7,32(7,3*) ,6 187, ,47 117,03 24,00 35,72(35,1*) 0,352 8,94(8,9*) , ,23 117,03 28,00 41,67(41,2*) 0,417 10, , ,93 117, /4 273,05 (273,1*) 58,40 86,91 0,595 15, ,3 269, ,29 132,13 40,50 60,27(57,9*) 0,350 8,89(8,9*) ,4 298, ,3 132,13 45,50 67,71(65,9*) 0,350 10,16(10,2*) ,4 298, ,76 132,13 51,00 75,90(73,7*) 0,450 11,43(11,4*) ,9 298, ,22 132,13 55,50 82,59(80,8*) 0,495 12,57(12,6*) ,9 298, ,94 132,13 60,70 90,33(88,5*) 0,545 13,84(13,8*) ,7 298, ,4 132, ,80 (177,8*) 32,00 47,62(46,5*) 0,475 12,06(12,1*) ,2 187, ,99 117,03 23,00 34,23(33,7*) 0,317 8,05(8,1*) , ,53 121,8 26,00 38,69(38,2*) 0,362 9,19(9,2*) ,5 200, ,25 121,8 29,00 43,16(42,8*) 0,408 10,36(10,4*) ,5 200, ,91 121,8 32,00 47,62(47,2*) 0,453 11,51(11,5*) , ,61 121,8 12 3/4 (323,9*) 65,70 97,77(96,1*) 0,595 15,11(15,1*) ,7 298, ,86 132,13 73,20 108,93 0,672 17, , ,94 132,13 49,46 (73,6*) 0,374 (9,5*) , ,82 133,73 56,99 (84,8*) 0,433 (11,0*) , ,78 133,73 35,00 52,09(51,5*) 0,498 12,65(12,7*) , ,33 121,8 63,97 (95,2*) 0,488 (12,4*) ,04 133,73 7 5/8 193,68 (193,7*) 26,40 39,29(38,1*) 0,328 8,33(8,3*) , ,85 127,36 29,70 44,20(43,3*) 0,375 9,52(9,5*) , ,47 127,36 33,70 50,15(49,2*) 0,430 10,92(10,9*) ,5 215, ,67 127,36 39,00 58,04(56,7*) 0,500 12,70(12,7*) ,5 215, ,15 127,36 42,80 63,69 0,562 14, ,6 215, ,97 127,36 45,30 67,41(66,5*) 0,595 15,11(15,1*) ,6 215, ,29 127, /8 339,72 (339,7*) 71,84 (106,9*) 0,551 (14,0*) ,2 133,73 54,50 81,10(78,6*) 0,380 9, ,7 365, ,45 133,73 61,00 90,78(88,6*) 0,430 10,92(10,9*) ,7 365, ,93 133,73 68,00 101,19(98,5*) 0,480 12,19(12,2*) ,3 365, ,39 133,73 72,00 107,15(105,2*) 0,514 13,06(13,1*) ,3 365, ,65 133,73 * according to Russian standards 2. TMK

28 50 51 TMK GF Mechanical Properties OD Weight Wall Thickness Strenght, кн Internal Pressure, kh Min. Collapse Resistance, MPa in lb/ft kg/m in 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 55 ksi 55 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 4 1/ /2 114,30 (114,3*) 127,00 (127,0*) 139,70 (139,7*) - (146,1*) 6 5/ /8 168,28 (168,3*) 177,80 (177,8*) 193,68 (193,7*) 13,50 20,09(19,4*) 0,290 7,37(7,4*) ,8 62,3 73,9 85,5 97,3 109,0 116,8 44,3 58,9 66,7 73,7 80,1 85,7 88,9 15,10 22,47(22,3*) 0,337 8,56(8,6*) ,7 72,3 85,8 99,3 113,0 126,6 135,6 52,5 76,5 88,0 98,8 109,2 118,9 124,9 15,00 22,32(22,1*) 0,296 7,52(7,5*) ,3 57,2 67,9 78,5 89,4 100,1 107,2 38,3 50,0 55,9 61,0 65,4 68,9 70,7 18,00 26,79(26,7*) 0,362 9,19(9,2*) ,9 82, ,2 122,3 131,1 50,9 72,3 82,8 92,7 102,2 110,8 116,2 21,40 31,85 0,437 11, ,4 100,2 115,9 131,9 147,8 158,3 60,5 88,1 104,5 120,9 137,6 154,1 165,1 23,20 34,53 0,478 12, ,4 92,3 109,6 126,8 144,3 161,6 173,1 65,5 95,4 113,3 131,1 149, ,10 35,86 0,500 12, ,3 96,6 114,6 132,7 150,9 169,1 181,1 68,2 99,4 117,9 136,4 155,3 173,9 186,3 15,50 23,07(22,9*) 0,275 6,98(7,0*) ,1 48,3 57,3 66,3 75,4 84,5 90,5 27,8 34,4 37,0 38,7 40,5 42,5 43,5 17,00 25,30(25,1*) 0,304 7,72(7,7) ,7 53,4 63,3 73,3 83,4 93,4 100,1 33,8 43,3 47,8 51,5 54,4 56,3 57,1 20,00 29,76(29,5*) 0,361 9,17(9,2*) ,5 63,4 75,2 87,1 99,1 111,0 118,9 45,6 60,9 69,1 76,5 83,4 89,4 92,9 23,00 34,23(33,60*) 0,415 10,54(10,5*) ,9 86,5 100,1 113,9 127,5 136,7 52,9 77,0 89,2 100,2 110,8 120,6 126,8 16,13 (24,0*) 0,275 (7,0*) ,8 46,3 54,9 63,6 72,3 81,0 86,8 25,5 30,9 32,8 34,7 36,8 38,3 38,9 17,61 (26,2*) 0,303 (7,7*) ,9 60,4 69,9 79,5 89,1 95,5 30,9 39,0 42,6 45,4 47,2 48,2 49,7 19,35 (28,8*) 0,334 (8,5*) ,6 56,2 66,7 77,2 87,8 98,4 105,4 37,1 48,3 53,8 58,6 62,5 65,6 67,2 21,50 (32,0*) 0,374 (9,5*) ,1 62,8 74,5 86,3 98,1 109,9 117,8 44,9 59,9 67,8 75,1 81,7 87,4 90,8 23,99 (35,7*) 0,421 (10,7*) ,6 70,7 83,9 97,1 110,5 123,8 132,7 51,5 73,8 84,6 94,9 104,6 113,6 119,2 20,00 29,76(29,0*) 0,288 7,32(7,3*) , ,9 57,7 65,7 73,5 78,8 20,5 24,0 26,2 27,8 28,8 28,8 28,8 24,00 35,72(35,1*) 0,352 8,94(8,9*) ,2 51,3 60,9 70,5 80,2 89,8 96,2 31,4 39,7 43,5 46,4 48,4 49,5 50,6 28,00 41,67(41,2*) 0,417 10, ,7 60,8 72,1 83,5 95,0 106,4 114,0 42,5 56,3 63,5 70,0 75,8 80,8 83,6 32,00 47,62(46,5*) 0,475 12,06(12,1*) ,5 69,2 82,1 95,1 108,2 121,2 129,8 50,4 71,2 81,4 91,1 100,2 108,6 113,8 23,00 34,23(33,7*) 0,317 8,05(8,1*) ,7 51,9 60,1 68,3 76,5 82,0 22,5 26,4 28,6 30, , ,00 38,69(38,2*) 0,362 9,19(9,2*) ,3 49,9 59,2 68,6 78,0 87,4 93,6 29,8 37,3 40,5 42,9 44,4 46,1 47,4 29,00 43,16(42,8*) 0,408 10,36(10,4*) ,6 56,3 66,8 77,3 87,9 98,5 105,5 37,2 48,3 54,0 58,8 62,8 65,9 67,5 32,00 47,62(47,2*) 0,453 11,51(11,5*) ,9 62,5 74,2 85,9 97,7 109,4 117,3 45,1 59,4 67,2 74,4 80,8 86,5 89,8 35,00 52,09(51,5*) 0,498 12,65(12,7*) ,2 68,7 81,6 94,4 107,4 120,3 128,9 50,1 70,3 80,4 89,8 98,8 106, ,40 39,29(38,1*) 0,328 8,33(8,3*) ,5 41,5 49,3 57,1 64,9 72,7 77, ,5 25,5 27,0 27,9 27,9 27,9 29,70 44,20(43,3*) 0,375 9,52(9,5*) ,6 47,5 56,3 65,2 74,2 83,1 89,0 26,9 32,3 35,3 36,8 39,1 40,8 41,7 33,70 50,15(49,2*) 0,430 10,92(10,9*) ,4 54,5 64,6 74,8 85,1 95,3 102,1 35,1 45,2 50,1 54,2 57,5 59, ,00 58,04(56,7*) 0,500 12,70(12,7*) ,5 63,3 75, ,0 110,8 118,8 45,5 60,8 68,9 76,4 83,2 89,2 92,7 42,80 63,69 0,562 14, ,9 71,2 84,5 97,7 111,2 124,6 133,4 51,7 74,6 85,5 95,9 105, ,7 45,30 67,41(66,5*) 0,595 15,11(15,1*) ,7 75,4 89,4 103,5 117,8 131,9 141,3 54,5 79,4 94,2 106,4 117,9 128,8 135,7 * according to Russian standards 2. TMK

29 52 53 TMK GF Mechanical Properties OD Weight Wall Thickness Strenght, кн Internal Pressure, kh Min. Collapse Resistance, MPa in lb/ft kg/m in 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 55 ksi 55 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 8 5/8 9 5/8 10 3/4 219,08 (219,1*) 244,48 (244,5*) 273,05 (273,1*) 12 3/4 (323,9*) 13 3/8 339,72 (339,7*) 32,00 47,62(46,3*) 0,352 8,94(8,9*) ,1 39,4 46,8 54,1 61,6 69,0 73,9 17,5 21,0 22,6 23,6 23,6 23,6 23,6 36,00 53,57(52,3*) 0,400 10, ,8 44,8 53,2 61,5 70,0 78,4 84,0 23,8 28,3 30,0 32, ,1 35,4 40,00 59,53(58,5*) 0,450 11,43(11,4*) ,6 50,4 59,8 69,2 78,7 88,2 94,5 30,3 38,1 41,5 44,1 45,7 47,1 48,5 44,00 65,48(64,6*) 0,500 12,70(12,7) , ,4 76,9 87,5 98,0 105,0 36,9 47,9 53,4 58,0 61, ,5 49,00 72,92(71,5*) 0,557 14,15(14,2*) ,8 62, ,7 97,5 109,2 117,0 44,4 59,2 66,9 74,0 80, ,3 36,00 53,57(51,9*) 0,352 8,94(8,9*) ,3 35,3 41,9 48,5 55,2 61,8 66,2 13,9 16,4 17,1 17,1 17,1 17,1 17,1 40,00 59,53(58,0*) 0,395 10,03(10,0*) ,2 39, ,4 61,9 69,4 74,3 17,7 21,3 22,9 23,9 24,3 24,3 24,3 43,50 64,73(63,6*) 0,435 11,05(11,1*) ,7 51, ,2 76,4 81,9 22,4 26,3 28,5 30,5 31,9 32,6 32,6 47,00 69,94(68,7*) 0,472 11,99(12,0*) ,5 47,4 56,2 65,1 74,0 82,9 88,8 26,8 32,8 35,1 36,5 38,9 40,6 41,4 53,50 79,62(78,7*) 0,545 13,84(13,8*) ,5 54,7 64,9 75,1 85,4 95,7 102,5 35,4 45,6 50,6 54,8 58,1 60,6 61,8 58,40 86,91 0,595 15, ,7 70, ,3 104,5 111,9 41,3 54,4 61,2 67,3 72,7 77,2 79,7 40,50 60,27(57,9*) 0,350 8,89(8,9*) ,6 31,5 37,3 43,2 49,1 55,0 59,0 10,9 11,9 11,9 11,9 11,9 11,9 11,9 45,50 67,71(65,9*) 0,350 10,16(10,2*) ,7 35,9 42,7 49,4 56,2 62,9 67,4 14,4 17,1 17,8 17,8 17,8 17,8 17,8 51,00 75,90(73,7*) 0,450 11,43(11,4*) ,8 40, ,5 63,2 70,8 75,8 18,7 22,2 24,0 25,2 25,8 25,8 25,8 55,50 82,59(80,8*) 0,495 12,57(12,6*) ,5 44,5 52,8 61,1 69,5 77,8 83,4 23,4 27,7 29,6 31,8 33,4 34,4 34,7 60,70 90,33(88,5*) 0,545 13,84(13,8*) , ,1 67,2 76,5 85,7 91,8 28,7 35,6 38,5 40,5 41, ,1 65,70 97,77(96,1*) 0,595 15,11(15,1*) ,7 53,5 63,4 73,4 83,5 93,5 100,2 33,9 43,5 48,0 51,7 54,6 56,6 57,4 73,20 108,93 0,672 17, ,5 60,4 71,7 82,9 94,4 105,7 113,2 42,1 55,6 62,7 69,0 74,6 79,4 82,2 49,46 (73,6*) 0,374 (9,5*) ,5 28,4 33, ,3 49,6 53,1 8,6 8,6 8,6 8,6 8,6 8,6 8,6 56,99 (84,8*) 0,433 (11,0*) , ,1 45,3 51,3 57,4 61,5 12,1 13,7 13,7 13,7 13,7 13,7 13,7 63,97 (95,2*) 0,488 (12,4*) , ,9 57,8 64,7 69,3 15,3 18,3 19,4 19,7 19,7 19,7 19,7 71,84 (106,9*) 0,551 (14,0*) ,3 41, ,7 65,2 73,1 78,3 20,2 23,7 25,8 27,4 28,3 28,3 28,3 54,50 81,10(78,6*) 0,380 9, ,8 27,4 32,6 37,7 42,9 48,0 51,4 7,6 7,9 7,9 7,9 7,9 7,9 7,9 61,00 90,78(88,6*) 0,430 10,92(10,9*) ,3 31,1 36,8 42,6 48,5 54,3 58,2 10,6 11,5 11,5 11,5 11,5 11,5 11,5 68,00 101,19(98,5*) 0,480 12,19(12,2*) ,8 34,7 41,1 47,6 54,2 60,7 65,0 13,4 15,6 16,1 16,1 16,1 16,1 16,1 72,00 107,15(105,2*) 0,514 13,06(13,1*) ,5 37,1 44, ,0 65,0 69,6 15,4 18,4 19,5 19,9 19,9 19,9 19,9 * according to Russian standards 2. TMK

30 54 55 TMK GF Make-up Torque OD Weight Wall Thickness Make-up Torque, Nm / ft-lb Make-up Torque, Nm / ft-lb 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi min opt max min opt max min opt max min opt max min opt max min opt max min opt max in lb/ft kg/m in Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb 4 1/ ,30 (114,3*) 127,00 (127,0*) 13,50 20,09(19,4*) 0,290 7,37(7,4*) ,10 22,47(22,3*) 0,337 8,56(8,6*) ,00 22,32(22,1*) 0,296 7,52(7,5*) ,00 26,79(26,7*) 0,362 9,19(9,2*) ,40 31,85 0,437 11, ,20 34,53 0,478 12, ,10 35,86 0,500 12, /2 139,70 (139,7*) 15,50 23,07(22,9*) 0,275 6,98(7,0*) ,00 25,30(25,1*) 0,304 7,72(7,7) ,00 29,76(29,5*) 0,361 9,17(9,2*) ,00 34,23(33,60*) 0,415 10,54(10,5*) ,13 (24,0*) 0,275 (7,0*) ,61 (26,2*) 0,303 (7,7*) (146,1*) 19,35 (28,8*) 0,334 (8,5*) / /8 168,28 (168,3*) 177,80 (177,8*) 193,68 (193,7*) 21,50 (32,0*) 0,374 (9,5*) ,99 (35,7*) 0,421 (10,7*) ,00 29,76(29,0*) 0,288 7,32(7,3*) ,00 35,72(35,1*) 0,352 8,94(8,9*) ,00 41,67(41,2*) 0,417 10, ,00 47,62(46,5*) 0,475 12,06(12,1*) ,00 34,23(33,7*) 0,317 8,05(8,1*) ,00 38,69(38,2*) 0,362 9,19(9,2*) ,00 43,16(42,8*) 0,408 10,36(10,4*) ,00 47,62(47,2*) 0,453 11,51(11,5*) ,00 52,09(51,5*) 0,498 12,65(12,7*) ,40 39,29(38,1*) 0,328 8,33(8,3*) ,70 44,20(43,3*) 0,375 9,52(9,5*) ,70 50,15(49,2*) 0,430 10,92(10,9*) ,00 58,04(56,7*) 0,500 12,70(12,7*) ,80 63,69 0,562 14, ,30 67,41(66,5*) 0,595 15,11(15,1*) * according to Russian standards 2. TMK

31 56 57 TMK GF Make-up Torque OD Weight Wall Thickness Make-up Torque, Nm / ft-lb Make-up Torque, Nm / ft-lb 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi min opt max min opt max min opt max min opt max min opt max min opt max min opt max in lb/ft kg/m in Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb 8 5/8 219,08 (219,1*) 32,00 47,62(46,3*) 0,352 8,94(8,9*) ,00 53,57(52,3*) 0,400 10, ,00 59,53(58,5*) 0,450 11,43(11,4*) ,00 65,48(64,6*) 0,500 12,70(12,7) ,00 72,92(71,5*) 0,557 14,15(14,2*) ,00 53,57(51,9*) 0,352 8,94(8,9*) ,00 59,53(58,0*) 0,395 10,03(10,0*) /8 10 3/4 244,48 (244,5*) 273,05 (273,1*) 43,50 64,73(63,6*) 0,435 11,05(11,1*) ,00 69,94(68,7*) 0,472 11,99(12,0*) ,50 79,62(78,7*) 0,545 13,84(13,8*) ,40 86,91 0,595 15, ,50 60,27(57,9*) 0,350 8,89(8,9*) ,50 67,71(65,9*) 0,350 10,16(10,2*) ,00 75,90(73,7*) 0,450 11,43(11,4*) ,50 82,59(80,8*) 0,495 12,57(12,6*) ,70 90,33(88,5*) 0,545 13,84(13,8*) ,70 97,77(96,1*) 0,595 15,11(15,1*) ,20 108,93 0,672 17, ,46 (73,6*) 0,374 (9,5*) /4 (323,9*) 56,99 (84,8*) 0,433 (11,0*) ,97 (95,2*) 0,488 (12,4*) /8 339,72 (339,7*) 71,84 (106,9*) 0,551 (14,0*) ,50 81,10(78,6*) 0,380 9, ,00 90,78(88,6*) 0,430 10,92(10,9*) ,00 101,19(98,5*) 0,480 12,19(12,2*) ,00 107,15(105,2*) 0,514 13,06(13,1*) * according to Russian standards 2. TMK

32 58 59 TMK Length Wall Thickness Make-Up Loss Critical Cross Section O.D. 2. TMK PF Application Field TMK PF is a premium connection with extra gas tightness properties used for the construction and operation of directional and horizontal wells within corrosive environments. Cone γ Pitch 5,08 Design Description Thread Form The connection has a hooked thread profile with pitch 5.08 and taper 1:16; +24 stabbing and compression load flank provides for easy stabbing, fast make-up and reduces cross threading; -4 tension load flank prevents the possibility of thread jump-out, reduces thread radial tension and improves wearing resistance and make-up properties of the connection. The tensile strength of the connection is nearly equal to the tensile strength of the pipe body. Cone-and-Cone Internal Metal Seal +18 cone-and-cone internal metal-to-metal seal offers excellent gas tightness even under the most severe stresses. Seal integrity keeps its properties even after numerous make-ups and break-outs due to fast Run-in/Run-out in the contact area. Cone ϕ α β Parallel line to the thread axis 1:16 Gap 20 Internal Torque Shoulder +15 internal shoulder consists of pin and box conical surfaces and ensures an additional extra sealing barrier and provides effective protection against over torquing. Both radii of the thread cross sections are spaced to obtain contact with the straight part of the thread bearing face in order to improve wear resistance and abrasive wear resistance of the thread when made-up/broken-out. Optimized gapping between pin and box load flanks improves resistance to compression load and prevents damage to the seal. Pipe Cross Section I.D. Drift Diameter 2. TMK

33 60 61 ТМK PF Dimensions ТМK PF Dimensions OD Weight Wall Thickness in lb/ft kg/m in 4 1/ /2 114,30 (114,3*) 127,00 (127,0*) 139,70 (139,7*) Critical Area, 2 Critical Area, 2 ID, OD, Length, Drift Diameter, Make-up Loss, 13,50 20,09(19,4*) 0,290 7,37(7,4*) ,60 127, ,39 106,71 15,10 22,47(22,3*) 0,337 8,56(8,6*) ,60 127, ,01 106,71 15,00 22,32(22,1*) 0,296 7,52(7,5*) ,10 141, ,79 109,88 18,00 26,79(26,7*) 0,362 9,19(9,2*) ,10 141, ,45 109,88 21,40 31,85 0,437 11, ,50 141, ,63 109,88 23,20 34,53 0,478 12, ,50 141, ,55 109,88 24,10 35,86 0,500 12, ,50 141, ,43 109,88 15,50 23,07(22,9*) 0,275 6,98(7,0*) ,70 153, ,57 110,60 17,00 25,30(25,1*) 0,304 7,72(7,7) ,70 153, ,09 110,60 20,00 29,76(29,5*) 0,361 9,17(9,2*) ,70 153, ,19 110,60 OD Weight Wall Thickness in lb/ft kg/m in 8 5/8 9 5/8 219,08 (219,1*) 244,48 (244,5*) Critical Area, 2 Critical Area, 2 ID, OD, Length, Drift Diameter, Make-up Loss, 32,00 47,62(46,3*) 0,352 8,94(8,9*) ,50 244, ,03 131,26 36,00 53,57(52,3*) 0,400 10, ,50 244, ,59 131,26 40,00 59,53(58,5*) 0,450 11,43(11,4*) ,50 244, ,05 131,26 44,00 65,48(64,6*) 0,500 12,70(12,7) ,10 244, ,51 131,26 49,00 72,92(71,5*) 0,557 14,15(14,2*) ,40 244, ,61 131,26 36,00 53,57(51,9*) 0,352 8,94(8,9*) ,90 269, ,63 131,26 40,00 59,53(58,0*) 0,395 10,03(10,0*) ,90 269, ,45 131,26 43,50 64,73(63,6*) 0,435 11,05(11,1*) ,90 269, ,41 131,26 47,00 69,94(68,7*) 0,472 11,99(12,0*) ,90 269, ,53 131,26 53,50 79,62(78,7*) 0,545 13,84(13,8*) ,60 269, ,83 131,26 23,00 34,23(33,60*) 0,415 10,54(10,5*) ,30 153, ,45 110,60 58,40 86,91 0,595 15, ,20 269, ,29 131,26 20,00 29,76(29,0*) 0,288 7,32(7,3*) ,90 187, ,46 116,16 40,50 60,27(57,9*) 0,350 8,89(8,9*) ,40 298, ,30 131,26 6 5/8 168,28 (168,3*) 21,25 31,62 0,315 8,00(8,0*) ,90 187, ,10 116,16 24,00 35,72(35,1*) 0,352 8,94(8,9*) ,90 187, ,23 116,16 28,00 41,67(41,2*) 0,417 10, ,90 187, ,93 116,16 32,00 47,62(46,5*) 0,475 12,06(12,1*) ,30 187, ,99 116, /4 273,05 (273,1*) 45,50 67,71(65,9*) 0,350 10,16(10,2*) ,40 298, ,76 131,26 51,00 75,90(73,7*) 0,450 11,43(11,4*) ,40 298, ,22 131,26 55,50 82,59(80,8*) 0,495 12,57(12,6*) ,80 298, ,94 131,26 60,70 90,33(88,5*) 0,545 13,84(13,8*) ,80 298, ,40 131,26 23,00 34,23(33,7*) 0,317 8,05(8,1*) ,90 200, ,53 120,93 65,70 97,77(96,1*) 0,595 15,11(15,1*) ,00 298, ,86 131, ,80 (177,8*) 26,00 38,69(38,2*) 0,362 9,19(9,2*) ,90 200, ,25 120,93 29,00 43,16(42,8*) 0,408 10,36(10,4*) ,90 200, ,91 120,93 32,00 47,62(47,2*) 0,453 11,51(11,5*) ,90 200, ,61 120,93 35,00 52,09(51,5*) 0,498 12,65(12,7*) ,70 200, ,33 120, /4 (323,9*) 73,20 108,93 0,672 17, ,30 298, ,94 131,26 49,46 (73,6*) 0,374 (9,5*) ,20 351, ,82 132,86 56,99 (84,8*) 0,433 (11,0*) ,20 351, ,78 132,86 63,97 (95,2*) 0,488 (12,4*) ,20 351, ,04 132,86 26,40 39,29(38,1*) 0,328 8,33(8,3*) ,30 215, ,85 126,49 71,84 (106,9*) 0,551 (14,0*) ,40 351, ,20 132,86 29,70 44,20(43,3*) 0,375 9,52(9,5*) ,30 215, ,47 126,49 54,50 81,10(78,6*) 0,380 9, ,00 365, ,45 132,86 7 5/8 193,68 (193,7*) 33,70 50,15(49,2*) 0,430 10,92(10,9*) ,30 215, ,67 126,49 39,00 58,04(56,7*) 0,500 12,70(12,7*) ,40 215, ,15 126, /8 339,72 (339,7*) 61,00 90,78(88,6*) 0,430 10,92(10,9*) ,00 365, ,93 132,86 68,00 101,19(98,5*) 0,480 12,19(12,2*) ,00 365, ,39 132,86 42,80 63,69 0,562 14, ,50 215, ,97 126,49 72,00 107,15(105,2*) 0,514 13,06(13,1*) ,10 365, ,65 132,86 45,30 67,41(66,5*) 0,595 15,11(15,1*) ,90 215, ,29 126,49 * according to Russian standards 2. TMK

34 62 63 ТМK PF Mechanical Properties OD Weight Wall Thickness Strenght, кн Internal Pressure, kh Min. Collapse Resistance, MPa in lb/ft kg/m in 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 4 1/ /2 6 5/ /8 114,3 (114,3*) 127 (127,0*) 139,7 (139,7*) 168,28 (168,3*) 177,8 (177,8*) 193,68 (193,7*) 13,50 20,09(19,4*) 0,290 7,37(7,4*) ,8 62,3 73,9 85,5 97,3 109,0 116,8 44,3 58,9 66,7 73,7 80,1 85,7 88,9 15,10 22,47(22,3*) 0,337 8,56(8,6*) ,7 72,3 85,8 99,3 113,0 126,6 135,6 52,5 76,5 88,0 98,8 109,2 118,9 124,9 15,00 22,32(22,1*) 0,296 7,52(7,5*) ,3 57,2 67,9 78,5 89,4 100,1 107,2 38,3 50,0 55,9 61,0 65,4 68,9 70,7 18,00 26,79(26,7*) 0,362 9,19(9,2*) ,9 82, ,2 122,3 131,1 50,9 72,3 82,8 92,7 102,2 110,8 116,2 21,40 31,85 0,437 11, ,4 100,2 115,9 131,9 147,8 158,3 60,5 88,1 104,5 120,9 137,6 154,1 165,1 23,20 34,53 0,478 12, ,4 92,3 109,6 126,8 144,3 161,6 173,1 65,5 95,4 113,3 131,1 149,1 167,0 179,0 24,10 35,86 0,500 12, ,3 96,6 114,6 132,7 150,9 169,1 181,1 68,2 99,4 117,9 136,4 155,3 173,9 186,3 15,50 23,07(22,9*) 0,275 6,98(7,0*) ,1 48,3 57,3 66,3 75,4 84,5 90,5 27,8 34,4 37,0 38,7 40,5 42,5 43,5 17,00 25,30(25,1*) 0,304 7,72(7,7) ,7 53,4 63,3 73,3 83,4 93,4 100,1 33,8 43,3 47,8 51,5 54,4 56,3 57,1 20,00 29,76(29,5*) 0,361 9,17(9,2*) ,5 63,4 75,2 87,1 99,1 111,0 118,9 45,6 60,9 69,1 76,5 83,4 89,4 92,9 23,00 34,23(33,60*) 0,415 10,54(10,5*) ,9 86,5 100,1 113,9 127,5 136,7 52,9 77,0 89,2 100,2 110,8 120,6 126,8 20,00 29,76(29,0*) 0,288 7,32(7,3*) , ,9 57,7 65,7 73,5 78,8 20,5 24,0 26,2 27,8 28,8 28,8 28,8 21,25 31,62 0,315 8,00(8,0*) ,5 45,9 54,5 63,1 71,8 80,4 86,1 25,1 30,2 32,0 34,2 36,1 37,5 38,1 24,00 35,72(35,1*) 0,352 8,94(8,9*) ,2 51,3 60,9 70,5 80,2 89,8 96,2 31,4 39,7 43,5 46,4 48,4 49,5 50,6 28,00 41,67(41,2*) 0,417 10, ,7 60,8 72,1 83,5 95,0 106,4 114,0 42,5 56,3 63,5 70,0 75,8 80,8 83,6 32,00 47,62(46,5*) 0,475 12,06(12,1*) ,5 69,2 82,1 95,1 108,2 121,2 129,8 50,4 71,2 81,4 91,1 100,2 108,6 113,8 23,00 34,23(33,7*) 0,317 8,05(8,1*) ,7 51,9 60,1 68,3 76,5 82,0 22,5 26,4 28,6 30,6 32,0 32,8 33,0 26,00 38,69(38,2*) 0,362 9,19(9,2*) ,3 49,9 59,2 68,6 78,0 87,4 93,6 29,8 37,3 40,5 42,9 44,4 46,1 47,4 29,00 43,16(42,8*) 0,408 10,36(10,4*) ,6 56,3 66,8 77,3 87,9 98,5 105,5 37,2 48,3 54,0 58,8 62,8 65,9 67,5 32,00 47,62(47,2*) 0,453 11,51(11,5*) ,9 62,5 74,2 85,9 97,7 109,4 117,3 45,1 59,4 67,2 74,4 80,8 86,5 89,8 35,00 52,09(51,5*) 0,498 12,65(12,7*) ,2 68,7 81,6 94,4 107,4 120,3 128,9 50,1 70,3 80,4 89,8 98,8 106,9 112,0 26,40 39,29(38,1*) 0,328 8,33(8,3*) ,5 41,5 49,3 57,1 64,9 72,7 77,9 20,0 23,5 25,5 27,0 27,9 27,9 27,9 29,70 44,20(43,3*) 0,375 9,52(9,5*) ,6 47,5 56,3 65,2 74,2 83,1 89,0 26,9 32,3 35,3 36,8 39,1 40,8 41,7 33,70 50,15(49,2*) 0,430 10,92(10,9*) ,4 54,5 64,6 74,8 85,1 95,3 102,1 35,1 45,2 50,1 54,2 57,5 59,9 61,0 39,00 58,04(56,7*) 0,500 12,70(12,7*) ,5 63,3 75, ,0 110,8 118,8 45,5 60,8 68,9 76,4 83,2 89,2 92,7 42,80 63,69 0,562 14, ,9 71,2 84,5 97,7 111,2 124,6 133,4 51,7 74,6 85,5 95,9 105,8 115,0 120,7 45,30 67,41(66,5*) 0,595 15,11(15,1*) ,7 75,4 89,4 103,5 117,8 131,9 141,3 54,5 79,4 94,2 106,4 117,9 128,8 135,7 * according to Russian standards 2. TMK

35 64 65 ТМK PF Mechanical Properties OD Weight Wall Thickness Strenght, кн Internal Pressure, kh Min. Collapse Resistance, MPa in lb/ft kg/m in 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 8 5/8 9 5/8 10 3/4 219,08 (219,1*) 244,48 (244,5*) 273,05-273,1 12 3/4 (323,9*) 13 3/8 339,72 32,00 47,62(46,3*) 0,352 8,94(8,9*) ,1 39,4 46,8 54,1 61,6 69,0 73,9 17,5 21,0 22,6 23,6 23,6 23,6 23,6 36,00 53,57(52,3*) 0,400 10, ,8 44,8 53,2 61,5 70,0 78,4 84,0 23,8 28,3 30,0 32,3 34,0 35,1 35,4 40,00 59,53(58,5*) 0,450 11,43(11,4*) ,6 50,4 59,8 69,2 78,7 88,2 94,5 30,3 38,1 41,5 44,1 45,7 47,1 48,5 44,00 65,48(64,6*) 0,500 12,70(12,7) , ,4 76,9 87,5 98,0 105,0 36,9 47,9 53,4 58,0 61,9 65,0 66,5 49,00 72,92(71,5*) 0,557 14,15(14,2*) ,8 62, ,7 97,5 109,2 117,0 44,4 59,2 66,9 74,0 80,4 86,0 89,3 36,00 53,57(51,9*) 0,352 8,94(8,9*) ,3 35,3 41,9 48,5 55,2 61,8 66,2 13,9 16,4 17,0 17,1 17,1 17,1 17,1 40,00 59,53(58,0*) 0,395 10,03(10,0*) ,2 39, ,4 61,9 69,4 74,3 17,7 21,3 22,9 23,9 24,3 24,3 24,3 43,50 64,73(63,6*) 0,435 11,05(11,1*) ,7 51, ,2 76,4 81,9 22,4 26,3 28,5 30,5 31,9 32,6 47,00 69,94(68,7*) 0,472 11,99(12,0*) ,5 47,4 56,2 65,1 74,0 82,9 88,8 26,8 32,8 35,1 36,5 38,9 40,6 41,4 53,50 79,62(78,7*) 0,545 13,84(13,8*) ,5 54,7 64,9 75,1 85,4 95,7 102,5 35,4 45,6 50,6 54,8 58,1 60,6 61,8 58,40 86,91 0,595 15, ,7 70, ,3 104,5 111,9 41,3 54,4 61,2 67,3 72,7 77,2 79,7 40,50 60,27(57,9*) 0,350 8,89(8,9*) ,6 31,5 37,3 43,2 49,1 55,0 59,0 10,9 11,9 11,9 11,9 11,9 11,9 11,9 45,50 67,71(65,9*) 0,350 10,16(10,2*) ,7 35,9 42,7 49,4 56,2 62,9 67,4 14,4 17,1 17,8 17,8 17,8 17,8 17,8 51,00 75,90(73,7*) 0,450 11,43(11,4*) ,8 40, ,5 63,2 70,8 75,8 18,7 22,2 24,0 25,2 25,8 25,8 25,8 55,50 82,59(80,8*) 0,495 12,57(12,6*) ,5 44,5 52,8 61,1 69,5 77,8 83,4 23,4 27,7 29,6 31,8 33,4 34,4 34,7 60,70 90,33(88,5*) 0,545 13,84(13,8*) , ,1 67,2 76,5 85,7 91,8 28,7 35,6 38,5 40,5 41,9 44,0 45,1 65,70 97,77(96,1*) 0,595 15,11(15,1*) ,7 53,5 63,4 73,4 83,5 93,5 100,2 33,9 43,5 48,0 51,7 54,6 56,6 57,4 73,20 108,93 0,672 17, ,5 60,4 71,7 82,9 94,4 105,7 113,2 42,1 55,6 62,7 69,0 74,6 79,4 82,2 49,46 (73,6*) 0,374 (9,5*) ,5 28,4 33, ,3 49,6 53,1 8,6 8,6 8,6 8,6 8,6 8,6 8,6 56,99 (84,8*) 0,433 (11,0*) , ,1 45,3 51,3 57,4 61,5 12,1 13,7 13,7 13,7 13,7 13,7 13,7 63,97 (95,2*) 0,488 (12,4*) , ,9 57,8 64,7 69,3 15,3 18,3 19,4 19,7 19,7 19,7 19,7 71,84 (106,9*) 0,551 (14,0*) ,3 41, ,7 65,2 73,1 78,3 20,2 23,7 25,8 27,4 28,3 28,3 28,3 54,50 81,10(78,6*) 0,380 9, ,8 27,4 32,6 37,7 42,9 48,0 51,4 7,6 7,9 7,9 7,9 7,9 7,9 7,9 61,00 90,78(88,6*) 0,430 10,92(10,9*) ,3 31,1 36,8 42,6 48,5 54,3 58,2 10,6 11,5 11,5 11,5 11,5 11,5 11,5 68,00 101,19(98,5*) 0,480 12,19(12,2*) ,8 34,7 41,1 47,6 54,2 60,7 65,0 13,4 15,6 16,1 16,1 16,1 16,1 16,1 72,00 107,15(105,2*) 0,514 13,06(13,1*) ,5 37,1 44, ,0 65,0 69,6 15,4 18,4 19,5 19,9 19,9 19,9 19,9 * according to Russian standards 2. TMK

36 66 67 ТМK PF Make-up Torque OD Weight Wall Thickness Make-up Torque, Nm / ft-lb Make-up Torque, Nm / ft-lb 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi min opt max min opt max min opt max min opt max min opt max min opt max min opt max in lb/ft kg/m in Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb 4 1/ ,3 (114,3*) 127 (127,0*) 13,5 20,09(19,4*) 0,29 7,37(7,4*) ,1 22,47(22,3*) 0,337 8,56(8,6*) ,32(22,1*) 0,296 7,52(7,5*) ,79(26,7*) 0,362 9,19(9,2*) ,4 31,85 0,437 11, ,2 34,53 0,478 12, ,1 35,86 0,5 12, /2 6 5/ /8 139,7 (139,7*) 168,28 (168,3*) 177,8 (177,8*) 193,68 (193,7*) 15,5 23,07(22,9*) 0,275 6,98(7,0*) ,30(25,1*) 0,304 7,72(7,7) ,76(29,5*) 0,361 9,17(9,2*) ,23(33,60*) 0,415 10,54(10,5*) ,76(29,0*) 0,288 7,32(7,3*) ,25 31,62 0,315 8,00(8,0*) ,72(35,1*) 0,352 8,94(8,9*) ,67(41,2*) 0,417 10, ,62(46,5*) 0,475 12,06(12,1*) ,23(33,7*) 0,317 8,05(8,1*) ,69(38,2*) 0,362 9,19(9,2*) ,16(42,8*) 0,408 10,36(10,4*) ,62(47,2*) 0,453 11,51(11,5*) ,09(51,5*) 0,498 12,65(12,7*) ,4 39,29(38,1*) 0,328 8,33(8,3*) ,7 44,20(43,3*) 0,375 9,52(9,5*) ,7 50,15(49,2*) 0,43 10,92(10,9*) ,04(56,7*) 0,5 12,70(12,7*) ,8 63,69 0,562 14, ,3 67,41(66,5*) 0,595 15,11(15,1*) * according to Russian standards 2. TMK

37 68 69 ТМK PF Make-up Torque OD Weight Wall Thickness Make-up Torque, Nm / ft-lb Make-up Torque, Nm / ft-lb 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi min opt max min opt max min opt max min opt max min opt max min opt max min opt max in lb/ft kg/m in Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb 8 5/8 219,08 (219,1*) 32 47,62(46,3*) 0,352 8,94(8,9*) ,57(52,3*) 0,4 10, ,53(58,5*) 0,45 11,43(11,4*) ,48(64,6*) 0,5 12,70(12,7) ,92(71,5*) 0,557 14,15(14,2*) ,57(51,9*) 0,352 8,94(8,9*) ,53(58,0*) 0,395 10,03(10,0*) /8 10 3/4 244,48 (244,5*) 273,05 (273,1*) 43,5 64,73(63,6*) 0,435 11,05(11,1*) ,94(68,7*) 0,472 11,99(12,0*) ,5 79,62(78,7*) 0,545 13,84(13,8*) ,4 86,91 0,595 15, ,5 60,27(57,9*) 0,35 8,89(8,9*) ,5 67,71(65,9*) 0,35 10,16(10,2*) ,90(73,7*) 0,45 11,43(11,4*) ,5 82,59(80,8*) 0,495 12,57(12,6*) ,7 90,33(88,5*) 0,545 13,84(13,8*) ,7 97,77(96,1*) 0,595 15,11(15,1*) ,2 108,93 0,672 17, ,46 73,6* 0,374 9,5* /4 (323,9*) 56,99 84,8* 0,433 11,0* ,97 95,2* 0,488 12,4* ,84 106,9* 0,551 14,0* ,5 81,10(78,6*) 0,38 9, /8 339, ,78(88,6*) 0,43 10,92(10,9*) ,19(98,5*) 0,48 12,19(12,2*) ,15(105,2*) 0,514 13,06(13,1*) * according to Russian standards 2. TMK

38 70 71 Cone 2. TMK TMK PF ET Extreme Torque Application Field TMK PF ET is the premium connection especially designed for extreme casing applications used for directional and horizontal wells. TMK PF ET has high resistance to extreme bending, compresion stresses and excessive torque. TMK PF ET is ideal for drilling with casing in high torque conditions. γ Pitch 5,08 Design Description Thread Form The connection has a hooked thread profile with pitch 5.08 and taper 1:16; +24 stabbing and compression load flank provides for easy stabbing, fast make-up and reduces cross threading; -4 tension load flank prevents the possibility of thread jump-out, reduces thread radial tension and improves wearing resistance and make-up properties of the connection. The tensile strength of the connection is nearly equal to the tensile strength of pipe body. Cone-and-Cone Internal Metal Seal +18 radial internal metal-to-metal seal offers excellent gas tightness even under the most severe stresses. Seal integrity retains its properties even after numerous make-ups and break- Cone ϕ outs due to fast Run-in/Run-out in the contact area. α β Gap Internal Torque Shoulder 1: internal shoulder consists of pin and box conical surfaces and ensures an additional extra Parallel line to the thread axis e sealing barrier and provides effective protection against over torquing. Both radii of the thread cross section are spaced to obtain contact with the straight part of the thread bearing face in order to improve wear resistance and abrasive wear resistance of the thread when made-up/broken-out. Optimized gapping between pin and box load flanks improves resistance to compression load and prevents damage to the seal. Length Wall Thickness Make-Up Loss Critical Cross Section Pipe Cross Section I.D. Drift Diameter O.D. 2. TMK

39 72 73 ТМK PF ET Dimensions ТМK PF ET Dimensions OD Weight Wall Thickness in lb/ft kg/m in 4 1/ /2 114,30 (114,3*) 127,00 (127,0*) 139,70 (139,7*) Critical Area, 2 Critical Area, 2 ID, OD, Length, Drift Diameter, Make-up Loss, 13,50 20,09(19,4*) 0,290 7,37(7,4*) ,10 127, ,39 105,84 15,10 22,47(22,3*) 0,337 8,56(8,6*) ,70 127, ,01 105,84 15,00 22,32(22,1*) 0,296 7,52(7,5*) ,50 141, ,79 109,01 18,00 26,79(26,7*) 0,362 9,19(9,2*) ,10 141, ,45 109,01 21,40 31,85 0,437 11, ,30 141, ,63 109,01 23,20 34,53 0,478 12, ,20 141, ,55 109,01 24,10 35,86 0,500 12, ,10 141, ,43 109,01 15,50 23,07(22,9*) 0,275 6,98(7,0*) ,20 153, ,57 110,60 17,00 25,30(25,1*) 0,304 7,72(7,7) ,80 153, ,09 110,60 20,00 29,76(29,5*) 0,361 9,17(9,2*) ,90 153, ,19 110,60 23,00 34,23(33,60*) 0,415 10,54(10,5*) ,10 153, ,45 110,60 OD Weight Wall Thickness in lb/ft kg/m in 7 5/8 8 5/8 193,68 (193,7*) 219,08 (219,1*) Critical Area, 2 Critical Area, 2 ID, OD, Length, Drift Diameter, Make-up Loss, 24,00 35,72 0,300 7, ,50 215, ,26 126,49 26,40 39,29(38,1*) 0,328 8,33(8,3*) ,10 215, ,85 126,49 29,70 44,20(43,3*) 0,375 9,52(9,5*) ,70 215, ,47 126,49 33,70 50,15(49,2*) 0,430 10,92(10,9*) ,90 215, ,67 126,49 39,00 58,04(56,7*) 0,500 12,70(12,7*) ,40 215, ,15 126,49 42,80 63,69 0,562 14, ,20 215, ,97 126,49 45,30 67,41(66,5*) 0,595 15,11(15,1*) ,60 215, ,29 126,49 28,00 41,67 0,304 7, ,70 244, ,46 131,26 32,00 47,62(46,3*) 0,352 8,94(8,9*) ,30 244, ,03 131,26 36,00 53,57(52,3*) 0,400 10, ,90 244, ,59 131,26 40,00 59,53(58,5*) 0,450 11,43(11,4*) ,30 244, ,05 131,26 20,00 29,76(29,0*) 0,288 7,32(7,3*) ,90 187, ,47 116,16 44,00 65,48(64,6*) 0,500 12,70(12,7) ,80 244, ,51 131,26 6 5/8 168,28 (168,3*) 21,25 31,62 0,315 8,00(8,0*) ,60 187, ,23 116,16 24,00 35,72(35,1*) 0,352 8,94(8,9*) ,70 187, ,10 116,16 28,00 41,67(41,2*) 0,417 10, ,40 187, ,93 116,16 49,00 72,92(71,5*) 0,557 14,15(14,2*) ,90 244, ,61 131,26 32,00 47,62(46,5*) 0,475 12,06(12,1*) ,50 187, ,99 116,16 20,00 29,12 0,272 6, ,20 200, ,80 116,16 23,00 34,23(33,7*) 0,317 8,05(8,1*) ,00 200, ,53 120, ,80 (177,8*) 26,00 38,69(38,2*) 0,362 9,19(9,2*) ,70 200, ,25 120,93 29,00 43,16(42,8*) 0,408 10,36(10,4*) ,20 200, ,91 120,93 32,00 47,62(47,2*) 0,453 11,51(11,5*) ,10 200, ,61 120,93 35,00 52,09(51,5*) 0,498 12,65(12,7*) ,80 200, ,33 120,93 * according to Russian standards 2. TMK

40 74 75 ТМK PF ET Mechanical Properties OD Weight Wall Thickness Strenght, кн Internal Pressure, kh Min. Collapse Resistance, MPa in lb/ft kg/m in 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 4 1/ /2 6 5/ /8 8 5/8 114,30 (114,3*) 127,00 (127,0*) 139,70 (139,7*) 168,28 (168,3*) 177,80 (177,8*) 193,68 (193,7*) 219,08 (219,1*) 13,50 20,09(19,4*) 0,290 7,37(7,4*) 938,0 1367,0 1622,0 1877,0 2135,0 2392,0 2562,0 42,8 62,3 73,9 85,5 97,3 109,0 116,8 44,3 58,9 66,7 73,7 80,1 85,7 88,9 15,10 22,47(22,3*) 0,337 8,56(8,6*) 1060,4 1544,5 1832,7 2120,9 2413,3 2702,9 2895,9 49,7 72,3 85,8 99,3 113,0 126,6 135,6 52,5 76,5 88,0 98,8 109,2 118,9 124,9 15,00 22,32(22,1*) 0,296 7,52(7,5*) 1070,0 1558,0 1849,0 2140,0 2435,0 2727,0 2921,0 39,3 57,2 67,9 78,5 89,4 100,1 107,2 38,3 50,0 55,9 61,0 65,4 68,9 70,7 18,00 26,79(26,7*) 0,362 9,19(9,2*) 1289,0 1877,0 2228,0 2578,0 2934,0 3286,0 3520,0 48,0 69,9 82,9 96,0 109,2 122,3 131,1 50,9 72,3 82,8 92,7 102,2 110,8 116,2 21,40 31,85 0,437 11, ,6 1924,8 2284,0 2643,1 3007,5 3368,4 3609,0 58,0 84,4 100,2 115,9 131,9 147,8 158,3 60,5 88,1 104,5 120,9 137,6 154,1 165,1 23,20 34,53 0,478 12, ,6 1924,8 2284,0 2643,1 3007,5 3368,4 3609,0 63,4 92,3 109,6 126,8 144,3 161,6 173,1 65,5 95,4 113,3 131,1 149,1 167,0 179,0 24,10 35,86 0,500 12, ,6 1924,8 2284,0 2643,1 3007,5 3368,4 3609,0 66,3 96,6 114,6 132,7 150,9 169,1 181,1 68,2 99,4 117,9 136,4 155,3 173,9 186,3 15,50 23,07(22,9*) 0,275 6,98(7,0*) 1103,0 1606,0 1906,0 2206,0 2510,0 2811,0 3012,0 33,1 48,3 57,3 66,3 75,4 84,5 90,5 27,8 34,4 37,0 38,7 40,5 42,5 43,5 17,00 25,30(25,1*) 0,304 7,72(7,7) 1213,0 1767,0 2097,0 2426,0 2761,0 3092,0 3313,0 36,7 53,4 63,3 73,3 83,4 93,4 100,1 33,8 43,3 47,8 51,5 54,4 56,3 57,1 20,00 29,76(29,5*) 0,361 9,17(9,2*) 1425,0 2076,0 2463,0 2850,0 3243,0 3633,0 3892,0 43,5 63,4 75,2 87,1 99,1 111,0 118,9 45,6 60,9 69,1 76,5 83,4 89,4 92,9 23,00 34,23(33,60*) 0,415 10,54(10,5*) 1425,8 2076,6 2464,1 2851,6 3244,7 3634,1 3893,7 50,0 72,9 86,5 100,1 113,9 127,5 136,7 52,9 77,0 89,2 100,2 110,8 120,6 126,8 20,00 29,76(29,0*) 0,288 7,32(7,3*) 1403,0 2044,0 2425,0 2806,0 3193,0 3576,0 3831,0 28,9 42,0 49,9 57,7 65,7 73,5 78,8 20,5 24,0 26,2 27,8 28,8 28,8 28,8 21,25 31,62 0,315 8,00(8,0*) 1527,0 2224,0 2639,0 3053,0 3472,0 3891,0 4169,0 31,5 45,9 54,5 63,1 71,8 80,4 86,1 25,1 30,2 32,0 34,2 36,1 37,5 38,1 24,00 35,72(35,1*) 0,352 8,94(8,9*) 1696,0 2470,0 2931,0 3392,0 3860,0 4323,0 4632,0 35,2 51,3 60,9 70,5 80,2 89,8 96,2 31,4 39,7 43,5 46,4 48,4 49,5 50,6 28,00 41,67(41,2*) 0,417 10, ,0 2896,0 3436,0 3976,0 4525,0 5068,0 5430,0 41,7 60,8 72,1 83,5 95,0 106,4 114,0 42,5 56,3 63,5 70,0 75,8 80,8 83,6 32,00 47,62(46,5*) 0,475 12,06(12,1*) 2179,0 3174,0 3766,0 4359,0 5105,0 5718,0 6126,0 47,5 69,2 82,1 95,1 108,2 121,2 129,8 50,4 71,2 81,4 91,1 100,2 108,6 113,8 20,00 29,12 0,272 6, ,0 2048,0 2430,0 2812,0 3198,0 3583,9 3839,9 25,8 37,5 44,5 51,6 58,7 65,7 70,4 15,7 18,9 20,0 20,5 20,5 20,5 20,5 23,00 34,23(33,7*) 0,317 8,05(8,1*) 1627,0 2370,0 2812,0 3254,0 3703,0 4147,0 4443,0 30,0 43,7 51,9 60,1 68,3 76,5 82,0 22,5 26,4 28,6 30,6 32,0 32,8 33,0 26,00 38,69(38,2*) 0,362 9,19(9,2*) 1845,0 2687,0 3189,0 3690,0 4199,0 4702,0 5038,0 34,3 49,9 59,2 68,6 78,0 87,4 93,6 29,8 37,3 40,5 42,9 44,4 46,1 47,4 29,00 43,16(42,8*) 0,408 10,36(10,4*) 2066,0 3008,0 3570,0 4131,0 4700,0 5264,0 5640,0 38,6 56,3 66,8 77,3 87,9 98,5 105,5 37,2 48,3 54,0 58,8 62,8 65,9 67,5 32,00 47,62(47,2*) 0,453 11,51(11,5*) 2175,8 3169,0 3760,4 4351,7 4951,6 5545,8 5941,9 42,9 62,5 74,2 85,9 97,7 109,4 117,3 45,1 59,4 67,2 74,4 80,8 86,5 89,8 35,00 52,09(51,5*) 0,498 12,65(12,7*) 2175,8 3169,0 3760,4 4351,7 4951,6 5545,8 5941,9 47,2 68,7 81,6 94,4 107,4 120,3 128,9 50,1 70,3 80,4 89,8 98,8 106,9 112,0 24,00 35,72 0,300 7, ,0 2459,0 2917,0 3376,0 3839,0 4302,6 4609,9 26,1 38,0 45,1 52,2 59,4 66,5 71,3 16,0 19,4 20,7 21,3 21,3 21,3 21,3 26,40 39,29(38,1*) 0,328 8,33(8,3*) 1839,0 2678,0 3177,0 3677,0 4184,0 4686,0 5020,0 28,5 41,5 49,3 57,1 64,9 72,7 77,9 20,0 23,5 25,5 27,0 27,9 27,9 27,9 29,70 44,20(43,3*) 0,375 9,52(9,5*) 2088,0 3040,0 3608,0 4175,0 4751,0 5321,0 5701,0 32,6 47,5 56,3 65,2 74,2 83,1 89,0 26,9 32,3 35,3 36,8 39,1 40,8 41,7 33,70 50,15(49,2*) 0,430 10,92(10,9*) 2376,0 3461,0 4107,0 4753,0 5408,0 6057,0 6489,0 37,4 54,5 64,6 74,8 85,1 95,3 102,1 35,1 45,2 50,1 54,2 57,5 59,9 61,0 39,00 58,04(56,7*) 0,500 12,70(12,7*) 2737,0 3986,0 4730,0 5474,0 6228,0 6975,0 7474,0 43,5 63,3 75,2 87,0 99,0 110,8 118,8 45,5 60,8 68,9 76,4 83,2 89,2 92,7 42,80 63,69 0,562 14, ,0 4440,0 5268,0 6097,0 6937,0 7770,0 8325,0 48,9 71,2 84,5 97,7 111,2 124,6 133,4 51,7 74,6 85,5 95,9 105,8 115,0 120,7 45,30 67,41(66,5*) 0,595 15,11(15,1*) 3108,6 4527,5 5372,3 6217,1 7074,2 7923,1 8489,1 51,7 75,4 89,4 103,5 117,8 131,9 141,3 54,5 79,4 94,2 106,4 117,9 128,8 135,7 28,00 41,67 0,304 7, ,0 2830,0 3358,0 3886,0 4419,0 4951,7 5305,4 23,4 34,0 40,4 46,7 53,2 59,6 63,8 12,9 14,9 14,9 14,9 14,9 14,9 14,9 32,00 47,62(46,3*) 0,352 8,94(8,9*) 2237,0 3258,0 3866,0 4474,0 5090,0 5701,0 6109,0 27,1 39,4 46,8 54,1 61,6 69,0 73,9 17,5 21,0 22,6 23,6 23,6 23,6 23,6 36,00 53,57(52,3*) 0,400 10, ,0 3681,0 4368,0 5054,0 5752,0 6442,0 6902,0 30,8 44,8 53,2 61,5 70,0 78,4 84,0 23,8 28,3 30,0 32,3 34,0 35,1 35,4 40,00 59,53(58,5*) 0,450 11,43(11,4*) 2826,0 4116,0 4884,0 5652,0 6431,0 7203,0 7717,0 34,6 50,4 59,8 69,2 78,7 88,2 94,5 30,3 38,1 41,5 44,1 45,7 47,1 48,5 44,00 65,48(64,6*) 0,500 12,70(12,7) 3121,0 4545,0 5393,0 6241,0 7102,0 7954,0 8522,0 38,4 56,0 66,4 76,9 87,5 98,0 105,0 36,9 47,9 53,4 58,0 61,9 65,0 66,5 49,00 72,92(71,5*) 0,557 14,15(14,2*) 3453,0 5029,0 5967,0 6905,0 7857,0 8800,0 9429,0 42,8 62,4 74,0 85,7 97,5 109,2 117,0 44,4 59,2 66,9 74,0 80,4 86,0 89,3 * according to Russian standards 2. TMK

41 76 77 ТМK PF ET Make-up Torque OD Weight Wall Thickness Make-up Torque, Nm / ft-lb 55 ksi 80 ksi 95 ksi 110 ksi Q125 ksi Make-up Torque, Nm / ft-lb 140 ksi 150 ksi min opt max min opt max min opt max min opt max min opt max min opt max min opt max in lb/ft kg/m in Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb 4 1/ ,30 (114,3*) 127,00 (127,0*) 13,50 20,09(19,4*) 0,290 7,37(7,4*) ,10 22,47(22,3*) 0,337 8,56(8,6*) ,00 22,32(22,1*) 0,296 7,52(7,5*) ,00 26,79(26,7*) 0,362 9,19(9,2*) ,40 31,85 0,437 11, ,20 34,53 0,478 12, ,10 35,86 0,500 12, ,50 23,07(22,9*) 0,275 6,98(7,0*) /2 6 5/ /8 8 5/8 139,70 (139,7*) 168,28 (168,3*) 177,80 (177,8*) 193,68 (193,7*) 219,08 (219,1*) 17,00 25,30(25,1*) 0,304 7,72(7,7) ,00 29,76(29,5*) 0,361 9,17(9,2*) ,00 34,23(33,60*) 0,415 10,54(10,5*) ,00 29,76(29,0*) 0,288 7,32(7,3*) ,25 31,62 0,315 8,00(8,0*) ,00 35,72(35,1*) 0,352 8,94(8,9*) ,00 41,67(41,2*) 0,417 10, ,00 47,62(46,5*) 0,475 12,06(12,1*) ,00 29,12 0,272 6, ,00 34,23(33,7*) 0,317 8,05(8,1*) ,00 38,69(38,2*) 0,362 9,19(9,2*) ,00 43,16(42,8*) 0,408 10,36(10,4*) ,00 47,62(47,2*) 0,453 11, ,00 52,09(51,5*) 0,498 12,65(12,7*) ,00 35,72 0,300 7, ,40 39,29(38,1*) 0,328 8,33(8,3*) ,70 44,20(43,3*) 0,375 9,52(9,5*) ,70 50,15(49,2*) 0,430 10,92(10,9*) ,00 58,04(56,7*) 0,500 12,70(12,7*) ,80 63,69 0,562 14, ,30 67,41(66,5*) 0,595 15,11(15,1*) ,00 41,67 0,304 7, ,00 47,62(46,3*) 0,352 8,94(8,9*) ,00 53,57(52,3*) 0,400 10, ,00 59,53(58,5*) 0,450 11,43(11,4*) ,00 65,48(64,6*) 0,500 12,70(12,7) ,00 72,92(71,5*) 0,557 14,15(14,2*) * according to Russian standards 2. TMK

42 78 79 TMK Length Wall Thickness Make-Up Loss Critical Cross Section O.D. 2. TMK FMC Application Field TMK FMC is a premium connection with advanced gas tightness properties used for the construction and operation of vertical and directional wells. TMK FMC is designed for use in corrosive environments. 1 : 10 Pitch 5,08 Design Description Thread Form TMK FMC has a trapezium thread profile with pitch 5.08 and taper 1:16; +10 stabbing and compression load flank provides for easy stabbing, fast make-up and reduces cross threading; +3 positive tension load flank prevents the possibility of thread jump-out during sufficient tensile and bending loads. Cone-and-Cone Internal Metal Seal Radial internal metal-to-metal seal, with taper 1:10, offers excellent gas tight sealing under the most severe stresses. Seal integrity remains intact even after numerous make-ups and break-outs. h Internal Torque Shoulder +15 internal torque shoulder provides effective protection against over torquing. ϕ 55 1 : 16 α β Parallel line to the thread axis Pipe Cross Section I.D. Drift Diameter 2. TMK

43 80 81 TMK FMC Dimensions TMK FMC Dimensions OD Weight Wall Thickness Critical Area Critical Area ID OD Length Drift Diameter in lb/ft kg/m in / /2 114,3 (114,3*) 127 (127,0*) 139,7 (139,7*) - (146,1*) Make-up Loss 11,6 17,26(16,9*) 0,25 6,35(6,4*) , ,42 109,94 13,5 20,09(19,4*) 0,29 7,37(7,4*) , ,38 109,94 15,1 22,47(22,3*) 0,337 8,56(8,6*) , ,94 19,94 (26,7*) 0,402 (10,2*) , ,73 109, ,79(26,7*) 0,362 9,19(9,2*) ,4 141, ,45 110,58 20,63 (30,7*) 0,421 (10,7*) ,4 141, ,43 110,58 15,5 23,07(22,9*) 0,275 6,98(7,0*) , ,57 112, ,30(25,1*) 0,304 7,72(7,7*) , ,09 112, ,76(29,5*) 0,361 9,17(9,2*) ,2 153, ,19 112, ,23(33,6*) 0,415 10,54(10,5*) ,2 153, ,45 112,17 16,13 (24,0*) 0,275 (7,0*) , ,93 112,7 17,61 (26,2*) 0,303 (7,7*) , ,53 112,7 19,35 (28,8*) 0,334 (8,5*) , ,93 112,7 21,5 (32,0*) 0,374 (9,5*) , ,93 112,7 OD Weight Wall Thickness Critical Area Critical Area ID OD Length Drift Diameter in lb/ft kg/m in /8 8 5/8 9 5/8 193,68 (193,7*) 219,08 (219,1*) 244,48 (244,5*) Make-up Loss 29,7 44,20(43,3*) 0,375 9,52(9,5*) ,3 215, ,47 127,26 33,7 50,15(49,2*) 0,43 10,92(10,9*) ,3 215, ,67 127, ,04(56,7*) 0,5 12,7(12,7*) ,3 215, ,15 127,26 45,3 67,41(66,5*) 0,595 15,11(15,1*) ,3 215, ,29 127, ,62(46,3*) 0,352 8,94(8,9*) ,8 244, ,03 130, ,57(52,3*) 0,4 10,16(10,2*) ,2 244, ,59 130, ,53(58,5*) 0,45 11,43(11,4*) ,2 244, ,05 130, ,49(64,6*) 0,5 12,7(12,7*) ,6 244, ,51 130, ,92(71,5*) 0,557 14,15(14,2*) ,6 244, ,61 130, ,57(51,9*) 0,352 8,94(8,9*) , ,63 132, ,53(58,0*) 0,395 10,03(10,0*) , ,45 132,03 43,5 64,73(63,6*) 0,435 11,05(11,1*) , ,41 132, ,94(68,7*) 0,472 11,99(12,0*) , ,53 132,03 23,99 (35,7*) 0,421 (10,7*) , ,53 112,7 53,5 79,62(78,7*) 0,545 13,84(13,8*) , ,83 132,03 6 5/ ,28 (168,3*) 177,8 (177,8*) 24 35,72(35,1*) 0,352 8,94(8,9*) ,6 187, ,23 116, ,67(41,2*) 0,417 10,59(10,6*) ,6 187, ,93 116, ,62(46,5*) 0,475 12,06(12,1*) ,6 187, ,99 116, ,23(33,7*) 0,317 8,05(8,1*) ,7 200, ,53 122, ,69(38,2*) 0,362 9,19(9,2*) ,7 200, ,25 122, ,16(42,8*) 0,408 10,36(10,4*) ,7 200, ,91 122, ,62(47,2*) 0,453 11,51(11,5*) ,7 200, ,61 122, ,09(51,5*) 0,498 12,65(12,7*) ,7 200, ,33 122, ,55(55,5*) 0,54 13,72(13,7*) ,7 200, ,19 122,5 41,67 (60,8*) 0,59 (15,0*) ,7 200, ,63 122,5 12 3/4 (323,9*) 13 3/8 339,73 (339,7*) 60,14 (89,5*) 0,626 (15,9*) , ,71 132,03 49,46 (73,6*) 0,374 (9,5*) , ,82 133,63 56,99 (84,8*) 0,433 (11,0*) , ,78 133,63 63,97 (95,2*) 0,488 (12,4*) , ,04 133,63 71,84 (106,9*) 0,551 (14,0*) , ,88 133,63 54,5 81,1(78,6*) 0,38 9,65(9,7*) ,4 365, ,45 132, ,78(88,6*) 0,43 10,92(10,9*) ,4 365, ,91 132, ,19(98,5*) 0,48 12,19(12,2*) ,4 365, ,37 132, ,15(105,2*) 0,514 13,06(13,1*) ,4 365, ,63 132,03 * according to Russian standards 2. TMK

44 82 83 TMK FMC Mechanical Properties OD Weight Wall Thickness Strenght, kh Internal Pressure, kh Min. Collapse Resistance, MPa in lb/ft kg/m in 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 4 1/ /2 114,3 (114,3*) 127 (127,0*) 139,7 (139,7*) - (146,1*) 6 5/ /8 8 5/8 9 5/8 168,28 (168,3*) 177,8 (177,8*) 193,68 (193,7*) 219,08 (219,1*) 244,48 (244,5*) 12 3/4 (323,9*) 13 3/8 339,73 (339,7*) 11,6 17,26(16,9*) 0,25 6,35(6,4*) ,9 53,7 63,7 73,7 83,9 93,9 100,6 34,2 43,8 48,5 52,2 55,2 57,3 58,1 13,5 20,09(19,4*) 0,29 7,37(7,4*) ,8 62,3 73,9 85,5 97,3 109,0 116,8 44,3 58,9 66,7 73,7 80,1 85,7 88,9 15,1 22,47(22,3*) 0,337 8,56(8,6*) ,7 72,3 85,8 99,3 113,0 126,6 135,6 52,5 76,5 88,0 98,8 109,2 118,9 124,9 19,94 (26,7*) 0,402 (10,2*) ,2 86,2 102,3 118,4 134,7 150,9 161,6 61,6 89,7 106,5 123,2 140,2 157,0 168, ,79(26,7*) 0,362 9,19(9,2*) ,0 69,9 82,9 96,0 109,2 122,3 131,1 50,9 72,3 82,8 92,7 102,2 110,8 116,2 20,63 (30,7*) 0,421 (10,7*) ,9 81,4 96,6 111,8 127,2 142,4 152,6 58,5 85,2 101,1 117,0 133,1 148,7 157,2 15,5 23,07(22,9*) 0,275 6,98(7,0*) ,1 48,3 57,3 66,3 75,4 84,5 90,5 27,8 34,4 37,0 38,7 40,5 42,5 43, ,30(25,1*) 0,304 7,72(7,7*) ,7 53,4 63,3 73,3 83,4 93,4 100,1 33,8 43,3 47,8 51,5 54,4 56,3 57, ,76(29,5*) 0,361 9,17(9,2*) ,5 63,4 75,2 87,1 99,1 111,0 118,9 45,6 60,9 69,1 76,5 83,4 89,4 92, ,23(33,6*) 0,415 10,54(10,5*) ,0 72,9 86,5 100,1 113,9 127,5 136,7 52,9 77,0 89,2 100,2 110,8 120,6 126,8 16,13 (24,0*) 0,275 (7,0*) ,8 46,3 54,9 63,6 72,3 81,0 86,8 25,5 30,9 32,8 34,7 36,8 38,3 38,9 17,61 (26,2*) 0,303 (7,7*) ,0 50,9 60,4 69,9 79,5 89,1 95,5 30,9 39,0 42,6 45,4 47,2 48,2 49,7 19,35 (28,8*) 0,334 (8,5*) ,6 56,2 66,7 77,2 87,8 98,4 105,4 37,1 48,3 53,8 58,6 62,5 65,6 67,2 21,5 (32,0*) 0,374 (9,5*) ,1 62,8 74,5 86,3 98,1 109,9 117,8 44,9 59,9 67,8 75,1 81,7 87,4 90,8 23,99 (35,7*) 0,421 (10,7*) ,6 70,7 83,9 97,1 110,5 123,8 132,7 51,5 73,8 84,6 94,9 104,6 113,6 119, ,72(35,1*) 0,352 8,94(8,9*) ,2 51,3 60,9 70,5 80,2 89,8 96,2 31,4 39,7 43,5 46,4 48,4 49,5 50, ,67(41,2*) 0,417 10,59(10,6*) ,7 60,8 72,1 83,5 95,0 106,4 114,0 42,5 56,3 63,5 70,0 75,8 80,8 83, ,62(46,5*) 0,475 12,06(12,1*) ,5 69,2 82,1 95,1 108,2 121,2 129,8 50,4 71,2 81,4 91,1 100,2 108,6 113, ,23(33,7*) 0,317 8,05(8,1*) ,0 43,7 51,9 60,1 68,3 76,5 82,0 22,5 26,4 28,6 30,6 32,0 32,8 33, ,69(38,2*) 0,362 9,19(9,2*) ,3 49,9 59,2 68,6 78,0 87,4 93,6 29,8 37,3 40,5 42,9 44,4 46,1 47, ,16(42,8*) 0,408 10,36(10,4*) ,6 56,3 66,8 77,3 87,9 98,5 105,5 37,2 48,3 54,0 58,8 62,8 65,9 67, ,62(47,2*) 0,453 11,51(11,5*) ,9 62,5 74,2 85,9 97,7 109,4 117,3 45,1 59,4 67,2 74,4 80,8 86,5 89, ,09(51,5*) 0,498 12,65(12,7*) ,2 68,7 81,6 94,4 107,4 120,3 128,9 50,1 70,3 80,4 89,8 98,8 106,9 112, ,55(55,5*) 0,54 13,72(13,7*) ,2 74,5 88,5 102,4 116,5 130,4 139,8 54,0 78,6 92,7 104,3 115,6 126,1 132,7 41,67 (60,8*) 0,59 (15,0*) ,0 81,5 96,7 111,9 127,3 142,6 152,8 58,6 85,3 101,2 117,1 133,3 149,0 157,6 29,7 44,20(43,3*) 0,375 9,52(9,5*) ,6 47,5 56,3 65,2 74,2 83,1 89,0 26,9 32,3 35,3 36,8 39,1 40,8 41,7 33,7 50,15(49,2*) 0,43 10,92(10,9*) ,4 54,5 64,6 74,8 85,1 95,3 102,1 35,1 45,2 50,1 54,2 57,5 59,9 61, ,04(56,7*) 0,5 12,7(12,7*) ,5 63,3 75,2 87,0 99,0 110,8 118,8 45,5 60,8 68,9 76,4 83,2 89,2 92,7 45,3 67,41(66,5*) 0,595 15,11(15,1*) ,7 75,4 89,4 103,5 117,8 131,9 141,3 54,5 79,4 94,2 106,4 117,9 128,8 135, ,62(46,3*) 0,352 8,94(8,9*) ,1 39,4 46,8 54,1 61,6 69,0 73,9 17,5 21,0 22,6 23,6 23,9 23,9 23, ,57(52,3*) 0,4 10,16(10,2*) ,8 44,8 53,2 61,5 70,0 78,4 84,0 23,8 28,3 30,0 32,3 34,0 35,1 35, ,53(58,5*) 0,45 11,43(11,4*) ,6 50,4 59,8 69,2 78,7 88,2 94,5 30,3 38,1 41,5 44,1 45,7 47,1 48, ,49(64,6*) 0,5 12,7(12,7*) ,4 56,0 66,4 76,9 87,5 98,0 105,0 36,9 47,9 53,4 58,0 61,9 65,0 66, ,92(71,5*) 0,557 14,15(14,2*) ,8 62,4 74,0 85,7 97,5 109,2 117,0 44,4 59,2 66,9 74,0 80,4 86,0 89, ,57(51,9*) 0,352 8,94(8,9*) ,3 35,3 41,9 48,5 55,2 61,8 66,2 13,9 16,4 17,0 17,1 17,1 17,1 17, ,53(58,0*) 0,395 10,03(10,0*) ,2 39,6 47,0 54,4 61,9 69,4 74,3 17,7 21,3 22,9 23,9 24,3 24,3 24,3 43,5 64,73(63,6*) 0,435 11,05(11,1*) ,0 43,7 51,8 60,0 68,2 76,4 81,9 22,4 26,3 28,5 30,5 31,9 32,6 32, ,94(68,7*) 0,472 11,99(12,0*) ,5 47,4 56,2 65,1 74,0 82,9 88,8 26,8 32,8 35,1 36,5 38,9 40,6 41,4 53,5 79,62(78,7*) 0,545 13,84(13,8*) ,5 54,7 64,9 75,1 85,4 95,7 102,5 35,4 45,6 50,6 54,8 58,1 60,6 61,8 60,14 (89,5*) 0,626 (15,9*) ,1 62,8 74,5 86,3 98,2 109,9 117,8 44,9 59,9 67,9 75,1 81,7 87,5 90,9 49,46 (73,6*) 0,374 (9,5*) ,5 28,4 33,7 39,0 44,3 49,6 53,1 8,6 8,9 8,9 8,9 8,9 8,9 8,9 56,99 (84,8*) 0,433 (11,0*) ,6 33,0 39,1 45,3 51,3 57,4 61,5 12,1 13,7 13,7 13,7 13,7 13,7 13,7 63,97 (95,2*) 0,488 (12,4*) ,4 37,0 44,0 50,9 57,8 64,7 69,3 15,3 18,3 19,4 19,7 19,7 19,7 19,7 71,84 (106,9*) 0,551 (14,0*) ,7 41,8 49,6 57,3 65,2 73,1 78,3 20,2 23,7 25,8 27,4 27,4 27,4 27,4 54,5 81,1(78,6*) 0,38 9,65(9,7*) ,8 27,4 32,6 37,7 42,9 48,0 51,4 7,6 7,9 7,9 7,9 7,9 7,9 7, ,78(88,6*) 0,43 10,92(10,9*) ,3 31,1 36,8 42,6 48,5 54,3 58,2 10,6 11,5 11,5 11,5 11,5 11,5 11, ,19(98,5*) 0,48 12,19(12,2*) ,8 34,7 41,1 47,6 54,2 60,7 65,0 13,4 15,6 16,1 16,1 16,1 16,1 16, ,15(105,2*) 0,514 13,06(13,1*) ,5 37,1 44,1 51,0 58,0 65,0 69,6 15,4 18,4 19,5 19,9 19,9 19,9 19,9 * according to Russian standards 2. TMK

45 84 85 TMK FMC Make-up Torques Make-up Torque, Nm/ft-lb Make-up Torque, Nm/ft-lb OD Weight Wall Thickness 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi min opt max min opt max min opt max min opt max min opt max min opt max min opt max in lb/ft kg/m in Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb 4 1/ /2 114,3 (114,3*) 127 (127,0*) 139,7 (139,7*) - (146,1*) 6 5/ /8 8 5/8 9 5/8 168,28 (168,3*) 177,8 (177,8*) 193,68 (193,7*) 219,08 (219,1*) 244,48 (244,5*) 12 3/4 (323,9*) 13 3/8 339,73 (339,7*) 11,6 17,26(16,9*) 0,25 6,35(6,4*) ,5 20,09(19,4*) 0,29 7,37(7,4*) ,1 22,47(22,3*) 0,337 8,56(8,6*) ,94 (26,7*) 0,402 (10,2*) ,79(26,7*) 0,362 9,19(9,2*) ,63 (30,7*) 0,421 (10,7*) ,5 23,07(22,9*) 0,275 6,98(7,0*) ,30(25,1*) 0,304 7,72(7,7*) ,76(29,5*) 0,361 9,17(9,2*) ,23(33,6*) 0,415 10,54(10,5*) ,13 (24,0*) 0,275 (7,0*) ,61 (26,2*) 0,303 (7,7*) ,35 (28,8*) 0,334 (8,5*) ,5 (32,0*) 0,374 (9,5*) ,99 (35,7*) 0,421 (10,7*) ,72(35,1*) 0,352 8,94(8,9*) ,67(41,2*) 0,417 10,59(10,6*) ,62(46,5*) 0,475 12,06(12,1*) ,23(33,7*) 0,317 8,05(8,1*) ,69(38,2*) 0,362 9,19(9,2*) ,16(42,8*) 0,408 10,36(10,4*) ,62(47,2*) 0,453 11,51(11,5*) ,09(51,5*) 0,498 12,65(12,7*) ,55(55,5*) 0,54 13,72(13,7*) ,67 (60,8*) 0,59 (15,0*) ,7 44,20(43,3*) 0,375 9,52(9,5*) ,7 50,15(49,2*) 0,43 10,92(10,9*) ,04(56,7*) 0,5 12,7(12,7*) ,3 67,41(66,5*) 0,595 15,11(15,1*) ,62(46,3*) 0,352 8,94(8,9*) ,57(52,3*) 0,4 10,16(10,2*) ,53(58,5*) 0,45 11,43(11,4*) ,49(64,6*) 0,5 12,7(12,7*) ,92(71,5*) 0,557 14,15(14,2*) ,57(51,9*) 0,352 8,94(8,9*) ,53(58,0*) 0,395 10,03(10,0*) ,5 64,73(63,6*) 0,435 11,05(11,1*) ,94(68,7*) 0,472 11,99(12,0*) ,5 79,62(78,7*) 0,545 13,84(13,8*) ,14 (89,5*) 0,626 (15,9*) ,46 73,6* 0,374 9,5* ,99 84,8* 0,433 11,0* ,97 95,2* 0,488 12,4* ,84 106,9* 0,551 14,0* ,5 81,1(78,6*) 0,38 9,65(9,7*) ,78(88,6*) 0,43 10,92(10,9*) ,19(98,5*) 0,48 12,19(12,2*) ,15(105,2*) 0,514 13,06(13,1*) * according to Russian standards 2. TMK

46 86 87 TMK TMK CS TMK CS is a premium connection with extra gas tightness properties used for the construction and operation of vertical and directional wells. TMK CS is designed for use in highly corrosive environments. 1:16 Design Description Thread Form TMK CS has a trapezium thread profile with pitch 5.08 and taper 1:16; +10 positive stabbing and compression load flank provides for easy stabbing and reduces cross threading; +3 positive tension load flank prevents the possibility of thread jump-out during sufficient tensile and bending loads. Cone-and-Cone Internal Metal Seal 1:16 radial conical internal metal-to-metal seal offers excellent gas tightness. Seal integrity retains its properties even after numerous make-ups and break-outs. ϕ Pitch 5,08 Gap Internal Torque Shoulder +15 internal torque shoulder provides effective protection against over torquing. 1:16 Parallel α β line to the thread axis 55 Length Wall Thickness Make-Up Loss Critical Cross Section O.D. 2. Application Field Pipe Cross Section I.D. Drift Diameter 2. TMK

47 88 89 ТМK CS Dimensions OD Weight Wall Thickness in lb/ft kg/m in 4 1/ /2 114,3 (114,3*) 127 (127,0*) 139,7 (139,7*) Critical Area, 2 Critical Area, 2 ID, OD, Length, Drift Diameter, Make-up Loss, 12,43 (18,5*) 0,28 (7,0*) , ,13 107,89 13,5 20,09(19,4*) 0,29 7,37(7,4*) , ,39 107,89 15,1 22,47(22,3*) 0,337 8,56(8,6*) ,01 107,89 13,91 (20,7*) 0,28 (7,0*) , ,01 109,52 15,3 22,32(22,1*) 0,3 7,52(7,5*) , ,79 109, ,79(26,7*) 0,362 9,19(9,2*) ,5 141, ,45 109,52 15,5 23,07(22,9*) 0,275 6,98(7,0*) ,5 153, ,57 111, ,30(25,1*) 0,304 7,72(7,7*) ,5 153, ,09 111, ,76(29,5*) 0,361 9,17(9,2*) , ,19 111, ,23(33,6*) 0,415 10,54(10,5*) ,5 153, ,45 111,12 ТМK CS Mechanical Properties OD Weight Wall Thickness Strenght, кн Internal Pressure, kh Min. Collapse Resistance, MPa in lb/ft kg/m in 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 4 1/ /2 114,3 (114,3*) 127 (127,0*) 139,7 (139,7*) 12,43 (18,5*) 0,28 (7,0*) ,6 59,2 70,2 81,2 92,4 103,5 110,9 40,6 53,5 60,1 65,9 71,1 75,4 77,8 13,5 20,09(19,4*) 0,29 7,37(7,4*) ,8 62,3 73,9 85,5 97,3 109,0 116,8 44,3 58,9 66,7 73,7 80,1 85,7 88,9 15,1 22,47(22,3*) 0,337 8,56(8,6*) ,7 72,3 85,8 99,3 113,0 126,6 135,6 52,5 76, ,8 109,2 118,9 124,9 13,91 (20,7*) 0,28 (7,0*) ,2 63,2 73,1 53,2 83,2 93,2 99,8 33,7 43,1 47,5 51, ,9 56, ,32(22,1*) 0,3 7,52(7,5*) ,2 67,9 78,5 57,2 89,4 100,1 107,2 38, , ,4 68,9 70, ,79(26,7*) 0,362 9,19(9,2*) ,0 69,9 82,9 96,0 109,2 122,3 131,1 50,9 72,3 82,8 92,7 102,2 110,8 116,2 15,5 23,07(22,9*) 0,275 6,98(7,0*) ,1 48,3 57,3 66,3 75,4 84,5 90,5 27,8 34, ,7 40,5 42,5 43, ,30(25,1*) 0,304 7,72(7,7*) ,7 53,4 63,3 73,3 83,4 93,4 100,1 33,8 43,3 47,8 51,5 54,4 56,3 57, ,76(29,5*) 0,361 9,17(9,2*) ,5 63,4 75,2 87,1 99,1 111,0 118,9 45,6 60,9 69,1 76,5 83,4 89,4 92, ,23(33,6*) 0,415 10,54(10,5*) ,0 72,9 86,5 100,1 113,9 127,5 136,7 52, ,2 100,2 110,8 120,6 126,8 * according to Russian standards 2. TMK

48 90 91 ТМK CS Make-up Torque OD Weight Wall Thickness Make-up Torque, Nm / ft-lb Make-up Torque, Nm / ft-lb 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi min opt max min opt max min opt max min opt max min opt max min opt max min opt max in lb/ft kg/m in Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb 4 1/ ,3 (114,3*) 127 (127,0*) 12,43 (18,5*) 0,276 (7,0*) ,5 20,09(19,4*) 0,29 7,37(7,4*) ,1 22,47(22,3*) 0,337 8,56(8,6*) ,91 (20,7*) 0,276 (7,0*) ,32(22,1*) 0,296 7,52(7,5*) ,79(26,7*) 0,362 9,19(9,2*) ,5 23,07(22,9*) 0,275 6,98(7,0*) /2 139,7 (139,7*) 17 25,30(25,1*) 0,304 7,72(7,7*) ,76(29,5*) 0,361 9,17(9,2*) ,23(33,6*) 0,415 10,54(10,5*) * according to Russian standards 2. TMK

49 TMK TMK TTL-1 Application Field TMK TTL-01 is a premium connection with advanced gas tightness properties used for the construction and operation of vertical and directional wells. 1:16 Design Description Thread Form TMK TTL-01 has a trapezium thread profile with pitch 5.08 and taper 1:16; +10 stabbing and compression load flank provides for easy stabbing and reduces cross threading; +3 tension load flank prevents the possibility of thread jump-out during significant tensile and bending loads. Cone-and-Cone Internal Metal Seal 1:16 radial internal metal-to-metal seal offers excellent gas tight sealing under the most severe stresses. Seal integrity remains intact even after numerous makeups and break-outs. Internal Torque Shoulder Gap 5, internal torque shoulder provides effective protection against over torquing. α β 1:16 Parallel line to the thread axis 55 Length Wall Thickness Make-Up Loss Critical Cross Section Critical Cross Section Pipe Cross Section I.D. Drift Diameter O.D. 2. TMK

50 94 95 TMK ТTL-01 Dimensions TMK ТTL-01 Dimensions OD Weight Wall Thickness in lb/ft kg/m in 8 5/8 219,08 (219,1*) 9 5/8 244,48 (244,5*) Critical Area, 2 Critical Cross Section, 2 Critical Area, 2 ID, OD, Length, Drift Diameter, Make-up Loss, 32 47,62(46,3*) 0,352 8,94(8,9*) , , ,57(52,3*) 0,4 10,16(10,2*) , , ,53(58,5*) 0,45 11,43(11,4*) , , ,49(64,6*) 0,5 12,7(12,7*) , , ,92(71,5*) 0,557 14,15(14,2*) , , ,57(51,9*) 0,352 8,94(8,9*) , , ,53(58,0*) 0,395 10,03(10,0*) , , ,5 64,73(63,6*) 0,435 11,05(11,1*) , , ,94(68,7*) 0,472 11,99(12,0*) , , ,5 79,62(78,7*) 0,545 13,84(13,8*) , , ,14 (89,5*) 0,626 (15,9*) , , OD Weight Wall Thickness in lb/ft kg/m in 10 3/4 273,05 (273,1*) 12 3/4 (323,9*) Critical Area, 2 Critical Cross Section, 2 Critical Area, 2 ID, OD, Length, Drift Diameter, Make-up Loss, 45,5 67,71(65,9*) 0,35 10,16(10,2*) , , ,90(73,7*) 0,45 11,43(11,4*) , , ,5 82,59(80,8*) 0,495 12,57(12,6*) , , ,7 90,33(88,5*) 0,545 13,84(13,8*) , , ,7 97,77(96,1*) 0,595 15,11(15,1*) , , ,46 (73,6*) 0,374 (9,5*) , ,99 (84,8*) 0,435 (11,0*) , ,97 (95,2*) 0,489 (12,4*) , ,84 (106,9*) 0,55 (14,0*) , TMK ТTL-01 Mechanical Properties OD Weight Wall Thickness Strenght, кн Internal Pressure, kh Min. Collapse Resistance, MPa in lb/ft kg/m in 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 8 5/8 9 5/8 219,08 (219,1*) 244,48 (244,5*) 10 3/4 273,05-273,1 12 3/4 (323,9*) 32 47,62(46,3*) 0,352 8,94(8,9*) ,1 39,4 46,8 54,1 61,6 69,0 73,9 17, ,6 23,6 23,6 23,6 23, ,57(52,3*) 0,4 10,16(10,2*) ,8 44,8 53,2 61,5 70,0 78,4 84,0 23,8 28, , ,1 35, ,53(58,5*) 0,45 11,43(11,4*) ,6 50,4 59,8 69,2 78,7 88,2 94,5 30,3 38,1 41,5 44,1 45,7 47,1 48, ,49(64,6*) 0,5 12,7(12,7*) ,4 56,0 66,4 76,9 87,5 98,0 105,0 36,9 47,9 53, , , ,92(71,5*) 0,557 14,15(14,2*) ,8 62,4 74,0 85,7 97,5 109,2 117,0 44,4 59,2 66, , , ,57(51,9*) 0,352 8,94(8,9*) ,3 35,3 41,9 48,5 55,2 61,8 66,2 13,9 16, ,1 17,1 17,1 17, ,53(58,0*) 0,395 10,03(10,0*) ,2 39,6 47,0 54,4 61,9 69,4 74,3 17,7 21,3 22,9 23,9 24,3 24,3 24,3 43,5 64,73(63,6*) 0,435 11,05(11,1*) ,0 43,7 51,8 60,0 68,2 76,4 81,9 22,4 26,3 28,5 30,5 31,9 32,6 32, ,94(68,7*) 0,472 11,99(12,0*) ,5 47,4 56,2 65,1 74,0 82,9 88,8 26,8 32,8 35,1 36,5 38,9 40,6 41,4 53,5 79,62(78,7*) 0,545 13,84(13,8*) ,5 54,7 64,9 75,1 85,4 95,7 102,5 35,4 45,6 50,6 54,8 58,1 60,6 61,8 60,14 (89,5*) 0,626 (15,9*) ,1 62,8 74,5 86,3 98,2 109,9 117,8 44,9 59,9 67,9 75,1 81,7 87,5 90,9 45,5 67,71(65,9*) 0,35 10,16(10,2*) ,7 35,9 42,6 49,3 56,2 62,9 67,4 14,4 17,1 17,8 17,8 17,8 17,8 17, ,90(73,7*) 0,45 11,43(11,4*) ,8 40,4 48,0 55,5 63,2 70,8 75,8 18,7 22, ,2 25,8 25,8 25,8 55,5 82,59(80,8*) 0,495 12,57(12,6*) ,5 44,5 52,8 61,1 69,5 77,8 83,4 23,4 27,7 29,6 31,8 33,4 34,4 34,7 60,7 90,33(88,5*) 0,545 13,84(13,8*) ,6 49,0 58,1 67,2 76,5 85,7 91,8 28,7 35,6 38,5 40,5 41, ,1 65,7 97,77(96,1*) 0,595 15,11(15,1*) ,7 53,4 63,4 73,4 83,5 93,5 100,2 33,9 43, ,7 54,6 56,6 57,4 49,46 (73,6*) 0,374 (9,5*) ,5 28,3 33,6 38,9 44,3 49,6 53,1 8,5 8,5 8,5 8,5 8,5 8,5 8,5 56,99 (84,8*) 0,435 (11,0*) ,6 33,0 39,1 45,3 51,3 57,4 61,5 12,1 13,7 13,7 13,7 13,7 13,7 13,7 63,97 (95,2*) 0,489 (12,4*) ,4 37,0 44,0 50,9 57,8 64,7 69,3 15,3 18,3 19,4 19,7 19,7 19,7 19,7 71,84 (106,9*) 0,55 (14,0*) ,7 41,8 49,6 57,3 65,2 73,1 78,3 20,2 23,7 25,8 27,4 28,3 28,3 28,3 * according to Russian standards 2. TMK

51 96 97 TMK ТTL-01 Make-up Torque OD Weight Wall Thickness Make-up Torque, Nm / ft-lb Make-up Torque, Nm / ft-lb 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi min opt max min opt max min opt max min opt max min opt max min opt max min opt max in lb/ft kg/m in Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb 8 5/8 219,08 (219,1*) 32 47,62(46,3*) 0,352 8,94(8,9*) ,57(52,3*) 0,4 10,16(10,2*) ,53(58,5*) 0,45 11,43(11,4*) ,49(64,6*) 0,5 12,7(12,7*) ,92(71,5*) 0,557 14,15(14,2*) ,57(51,9*) 0,352 8,94(8,9*) ,53(58,0*) 0,395 10,03(10,0*) /8 10 3/4 244,48 (244,5*) 273,05-273,1 43,5 64,73(63,6*) 0,435 11,05(11,1*) ,94(68,7*) 0,472 11,99(12,0*) ,5 79,62(78,7*) 0,545 13,84(13,8*) ,14 (89,5*) 0,626 (15,9*) ,5 67,71(65,9*) 0,35 10,16(10,2*) ,90(73,7*) 0,45 11,43(11,4*) ,5 82,59(80,8*) 0,495 12,57(12,6*) ,7 90,33(88,5*) 0,545 13,84(13,8*) ,7 97,77(96,1*) 0,595 15,11(15,1*) ,46 (73,6*) 0,374 (9,5*) /4 (323,9*) 56,99 (84,8*) 0,435 (11,0*) ,97 (95,2*) 0,489 (12,4*) ,84 (106,9*) 0,55 (14,0*) * according to Russian standards 2. TMK

52 98 99 TMK 2. Streamlined ID ULTRA CX ULTRA-CX the only 100% special clearance T&C connection... ULTRA-CX has the highest tensile efficiency of any slim-od connection ULTRA-CX has compression efficiency equal to or greater than its tensile efficiency ULTRA-CX pressure ratings exceed API minimum internal yield and collapse pressure Intrenal Run-in/Run-out Positive Torque Stop FullContact Threads Metal-to-Metal Seal Threads Reduced OD 100% Special ClearanceT&C Connection Size Range: 2 3/8 to 13 5/8 100% efficient threaded and coupled connection Featuring a special clearance O.D. equivalent to most semi-flush connections Pressure capacity exceeds API pipe body pressure ratings 100% compression efficiency Fullcontact threads Run-in / run-out threads Intrenal Metal to Metal Seal Result: Pressure integrity Positive Torque Shoulder Result: Reliability and connection performance Result: Increased torque strength Streamlined ID Result: Minimized turbulence in high velocity flows Run-in/Run-out Threads Result: Maximum critical section area FullContact Threads Result: Compression efficiency Result: High tension and bending capacity Result: Deep, easy stabbing and quick, easy make-up with no cross threading risk Reduced OD Result: Fits in the tightest well bore Result: Gets more cement around your string 2. TMK

53 ULTRA-CX Product Suary: Pipe and Connection Data OD Weight PE Weight Wall Thickness CONNECTION DATA J-55 L-80 T-95 P-110 Q-125 ID Drift Diameter OD Pipe Body Area Critical Section Area Make-Up Loss Length in lb/ft lb/ft in in in in in 2 in 2 in in lbs ft lbs lbs ft lbs lbs ft lbs lbs ft lbs lbs ft lbs 4 4 1/ /2 6 5/ /8 10,80 10,460 0,262 3,476 3,351 4,250 3,077 2,995 4,108 9, ,60 11,340 0,286 3,428 3,303 4,270 3,337 3,256 4,345 9, ,20 12,930 0,330 3,340 3,215 4,270 3,805 3,726 4,477 9, ,80 14,680 0,380 3,240 3,115 4,270 4,322 4,245 5,135 11, ,10 15,890 0,415 3,170 3,045 4,270 4,674 4,599 5,626 12, ,50 10,230 0,224 4,052 3,927 4,770 3,009 2,901 4,107 9, ,60 11,350 0,250 4,000 3,875 4,770 3,338 3,232 4,766 10, ,60 12,240 0,271 3,958 3,833 4,770 3,600 3,495 4,149 9, ,50 13,040 0,290 3,920 3,795 4,770 3,836 3,731 4,486 9, ,10 14,980 0,337 3,826 3,701 4,770 4,407 4,306 4,596 10, ,60 16,520 0,375 3,750 3,625 4,770 4,860 4,760 4,476 9, ,00 16,720 0,380 3,740 3,615 4,770 4,918 4,819 4,559 9, ,80 18,690 0,430 3,640 3,515 4,770 5,498 5,401 5,104 11, ,00 12,830 0,253 4,494 4,369 5,270 3,773 3,640 4,859 10, ,00 14,870 0,296 4,408 4,283 5,270 4,374 4,244 4,604 10, ,00 17,930 0,362 4,276 4,151 5,270 5,275 5,148 4,982 10, ,30 20,010 0,408 4,184 4,059 5,270 5,886 5,762 4,874 10, ,80 20,630 0,422 4,156 4,031 5,270 6,069 5,947 5,022 10, ,40 21,300 0,437 4,126 4,001 5,270 6,264 6,143 5,181 11, ,00 13,700 0,244 5,012 4,887 5,770 4,029 3,866 4,638 10, ,50 15,350 0,275 4,950 4,825 5,770 4,514 4,353 4,258 9, ,00 16,870 0,304 4,892 4,767 5,770 4,962 4,804 4,211 9, ,00 19,810 0,361 4,778 4,653 5,770 5,828 5,673 4,983 10, ,00 22,540 0,415 4,670 4,545 5,770 6,630 6,478 4,964 10, ,00 19,490 0,288 6,049 5,924 6,895 5,734 5,497 4,500 9, ,00 23,580 0,352 5,921 5,796 6,895 6,937 6,705 4,894 10, ,60 24,210 0,362 5,901 5,776 6,895 7,123 6,892 5,031 10, ,00 27,650 0,417 5,791 5,666 6,895 8,133 7,906 5,025 10, ,00 19,540 0,272 6,456 6,331 7,270 5,749 5,482 4,254 9, ,00 22,630 0,317 6,366 6,250 7,270 6,655 6,392 4,433 9, ,00 25,660 0,362 6,276 6,151 7,270 7,549 7,290 5,050 10, ,00 28,720 0,408 6,184 6,125 7,270 8,449 8,194 4,949 10, ,00 31,670 0,453 6,094 6,000 7,270 9,317 9,065 5,455 11, ,40 25,560 0,328 6,969 6,844 7,895 7,519 7,205 4,613 10, ,70 29,040 0,375 6,875 6,750 7,895 8,541 8,232 4,593 10, ,70 33,040 0,430 6,765 6,640 7,895 9,720 9,415 5,210 11, ,00 38,050 0,500 6,625 6,500 7,895 11,192 10,894 5,970 12, TMK

54 TMK 2. ULTRA QX What makes the ULTRA-QX premium connections the FullContact connection... ULTRA-QX premium connections are 100% threaded and coupled connections ULTRA-QX premium connections have compression and tensile strength equal to the pipe body ULTRA-QX premium connections have pressure ratings that exceed API minimum internal yield and collapse Sphere and Cone, Positive Torque Stop and Metal-Metal Seals FullContact Threads Run-Out Threads FullContact Threads Stab Flanks contact at full engagement to distribute compressive loading throughout threads Result: Compression efficiency Reverse Angle Flank ( Hook Thread ) Result: High tension and bending capacity Result: Deep, easy stabbing and quick, easy make-up with no cross threading risk. Result: Negative load flank Sphere-and-Cone Internal Metal Seal Radial interference develops seal contact pressure Result: External factors (axial loads, temperature, dope, make-up torque) do not affect seal performance Recoended Make-up Torque does not affect seal dimensions or contact pressure Result: Connection can be tripped multiple times Run-in/Run-out Threads Complimentary Run-in/Run-out threads extend thread mating surfaces Result: Maximum critical section area Representative VME Graph ULTRA-QX Pipe Body Connection API Collapse 2. TMK

55 ULTRA-QX Product Suary: Pipe and Connection Data TMK OD Weight PE Weight Wall Thickness ID CONNECTION DATA J-55 L-80 T-95 P-110 Q-125 Drift Diameter OD Pipe Body Area Critical Section Area Make-up Loss Length in lb/ft lb/ft in in in in in 2 in 2 in in lbs ft lbs lbs ft lbs lbs ft. lbs lbs ft lbs lbs ft. lbs 4 1/ /2 6 5/ / ,500 10, , ,700 15, , ,800 18, , ,000 21, , ,100 24, , ,500 10, , ,000 15, , ,100 18, , ,100 21, , ,200 24, , ,000 10, , ,000 15, , ,000 18, , ,000 21, , ,000 24, , ,900 10, , ,800 15, , ,300 18, , ,900 21, , ,400 24, , ,400 10, , ,500 15, , ,700 18, , ,800 21, , ,900 24, , ,300 10, , ,800 15, , ,300 18, , ,700 21, , ,200 24, , ,500 10, , ,900 15, , ,500 18, , ,100 21, , ,700 24, , ,100 10, , ,900 15, , ,000 18, , ,200 21, , ,300 24, , ,700 10, , ,800 15, , ,100 18, , ,400 21, , ,700 24, , ,800 10, , ,500 15, , ,500 18, , ,600 21, , ,600 24, , ,500 10, , ,100 15, , ,100 18, , ,000 21, , ,000 24, , ,400 10, , ,200 15, , ,100 18, , ,900 21, , ,800 24, , ,700 10, , ,400 15, , ,500 18, , ,500 21, , ,500 24, , ,200 10, , ,100 15, , ,800 18, , ,500 21, , ,200 24, , ,900 10, , ,900 15, , ,400 18, , ,800 21, , ,300 24, , ,500 10, , ,200 15, , ,600 18, , ,100 21, , ,500 24, , ,600 10, , ,300 15, , ,800 18, , ,200 21, , ,700 24, , ,200 10, , ,000 15, , ,700 18, , ,400 21, , ,100 24, , ,900 10, , ,300 15, , ,100 18, , ,900 21, , ,700 24, , ,500 10, , ,400 15, , ,200 18, , ,000 21,500 1,050,300 1,089,800 24,500 1,146, ,300 10, , ,600 15, , ,600 18, , ,600 21, , ,600 24, , ,900 10, , ,000 15, , ,900 18, , ,800 21, , ,700 24, , ,500 10, , ,900 15, , ,000 18, , ,000 21, , ,100 24, , ,700 10, , ,800 15, , ,600 18, , ,400 21, , ,300 24, , ,300 10, , ,600 15, , ,600 18, , ,600 21, ,500 1,016,500 24,500 1,061, ,200 10, , ,300 15, , ,400 18, , ,500 21,500 1,003,000 1,050,600 24,500 1,096, ,700 10, , ,100 15, , ,800 18, ,200 1,009,500 21,500 1,095, ,100 24, , ,100 10, , ,600 15, , ,000 18, ,000 1,058,300 21,500 1,148,200 1,202,600 24,500 1,255, ,300 10, , ,800 15, , ,700 18,600 1,015,400 1,106,700 21,500 1,200,700 1,257,600 24,500 1,313, ,000 10, , ,400 15, , ,200 18, , ,100 21, , ,900 24, , ,200 10, , ,900 15, , ,100 18, , ,400 21, , ,600 24, , ,700 10, , ,900 15, , ,600 18, , ,400 21,500 1,005,100 1,056,100 24,500 1,100, ,400 10, , ,300 15, , ,100 18, ,800 1,024,900 21,500 1,108,400 1,164,600 24,500 1,213, ,400 10, , ,700 15, , ,300 18,600 1,023,800 1,118,900 21,500 1,210,100 1,271,500 24,500 1,324, ,700 10, , ,700 15, ,900 1,041,100 18,600 1,103,000 1,205,500 21,500 1,303,700 1,369,800 24,500 1,426, ,400 10, , ,400 15,600 1,062,300 1,128,700 18,600 1,195,800 1,306,900 21,500 1,413,400 1,485,100 24,500 1,546, ,500 10, , ,500 15, , ,300 18, , ,100 21, , ,800 24, , ,700 10, , ,200 15, , ,400 18, , ,500 21,500 1,010,700 1,067,600 24,500 1,107, ,500 10, , ,500 15, , ,300 18, ,700 1,069,100 21,500 1,150,200 1,214,900 24,500 1,260, ,200 10, , ,700 15, , ,600 18,600 1,047,900 1,150,500 21,500 1,237,700 1,307,400 24,500 1,356, ,500 10, , ,300 15, ,400 1,063,200 18,600 1,121,300 1,231,100 21,500 1,324,400 1,398,900 24,500 1,451, ,800 10, , ,600 15,600 1,107,900 1,184,600 18,600 1,249,300 1,371,700 21,500 1,475,700 1,558,700 24,500 1,617, ,700 10, ,300 1,051,200 15,600 1,167,500 1,248,300 18,600 1,316,500 1,445,400 21,500 1,555,000 1,642,600 24,500 1,704, ,900 10, ,200 1,099,500 15,600 1,221,100 1,305,700 18,600 1,377,000 1,511,800 21,500 1,626,400 1,718,000 24,500 1,782, TMK

56 ULTRA-QX Product Suary: Pipe and Connection Data TMK OD Weight PE Weight Wall Thickness ID CONNECTION DATA J-55 L-80 T-95 P-110 Q-125 Drift Diameter OD Pipe Body Area Critical Section Area Make-up Loss Length in lb/ft lb/ft in in in in in2 in2 in in lbs ft lbs lbs ft lbs lbs ft. lbs lbs ft lbs lbs ft. lbs ,500 10, ,400 1,069,900 15,600 1,186,800 1,270,500 18,600 1,338,700 1,471,100 21,500 1,581,000 1,671,800 24,500 1,732, / ,400 10, ,000 1,119,100 15,600 1,241,400 1,329,000 18,600 1,400,300 1,538,800 21,500 1,653,700 1,748,700 24,500 1,812, ,200 10, ,600 1,143,600 15,600 1,268,500 1,358,000 18,600 1,430,900 1,572,500 21,500 1,689,900 1,786,900 24,500 1,852, ,000 10, , ,700 15, , ,900 18, , ,100 21, , ,300 24,500 1,023, ,100 10, , ,800 15, , ,100 18, ,800 1,006,300 21,500 1,073,400 1,143,500 24,500 1,178, / ,400 10, , ,800 15, , ,900 18,600 1,027,800 1,136,900 21,500 1,212,700 1,291,900 24,500 1,331, ,600 10, , ,500 15,600 1,016,300 1,097,900 18,600 1,149,300 1,271,200 21,500 1,356,000 1,444,600 24,500 1,488, ,900 10, ,500 1,021,000 15,600 1,122,300 1,212,400 18,600 1,269,200 1,403,800 21,500 1,497,400 1,595,300 24,500 1,644, ,400 10, ,800 1,129,400 15,600 1,241,500 1,341,200 18,600 1,403,900 1,552,900 21,500 1,656,500 1,764,700 24,500 1,818, ,900 10, , ,300 15, , ,100 18,600 1,012,100 1,127,900 21,500 1,192,800 1,281,800 24,400 1,312, ,900 10, , ,300 15, ,900 1,088,100 18,600 1,130,500 1,259,900 21,500 1,332,300 1,431,700 24,500 1,466, / ,700 10, ,900 1,004,700 15, ,100 1,193,100 18,600 1,239,600 1,381,400 21,500 1,460,900 1,569,800 24,500 1,607, ,400 10, ,400 1,085,700 15,600 1,181,300 1,289,300 18,600 1,339,600 1,492,900 21,500 1,578,800 1,696,500 24,500 1,737, ,000 10,700 1,019,900 1,243,700 15,600 1,353,100 1,476,900 18,600 1,534,500 1,710,100 21,500 1,808,400 1,943,300 24,500 1,989, ,300 10,700 1,107,300 1,350,300 15,600 1,469,100 1,603,500 18,600 1,666,100 1,856,700 21,500 1,963,500 2,109,900 24,500 2,160, / ,900 10,700 1,186,800 1,452,900 15,600 1,576,600 1,725,400 18,600 1,789,300 1,997,800 21,500 2,108,200 2,270,200 24,500 2,320, ,900 10, , ,800 15, ,600 1,086,300 18,600 1,119,200 1,257,800 21,500 1,317,300 1,429,400 24,500 1,452, ,300 10, ,000 1,040,400 15,600 1,118,700 1,235,500 18,600 1,272,900 1,430,600 21,500 1,498,200 1,625,700 24,500 1,652, / ,800 10, ,200 1,164,900 15,600 1,252,500 1,383,300 18,600 1,425,100 1,601,700 21,500 1,677,400 1,820,100 24,500 1,850, ,100 10,700 1,027,500 1,275,700 15,600 1,371,700 1,515,000 18,600 1,560,800 1,754,200 21,500 1,837,100 1,993,400 24,500 2,026, ,900 10,700 1,125,800 1,397,800 15,600 1,502,900 1,659,900 18,600 1,710,100 1,921,900 21,500 2,012,800 2,184,000 24,500 2,219, ,044,000 10,700 1,223,100 1,518,500 15,600 1,632,800 1,803,300 18,600 1,857,800 2,088,000 21,500 2,186,700 2,372,700 24,500 2,411, ,900 10, , ,500 15,600 1,016,500 1,134,600 18,600 1,160,100 1,313,800 21,500 1,363,900 1,492,900 24,500 1,507, ,000 10, ,500 1,072,000 15,600 1,140,500 1,273,000 18,600 1,301,600 1,474,000 21,500 1,530,200 1,675,100 24,400 1,691, ,400 10, ,300 1,237,000 15,600 1,316,000 1,468,900 18,600 1,501,900 1,700,900 21,500 1,765,700 1,932,800 24,400 1,951, / ,400 10,700 1,096,700 1,383,900 15,600 1,472,300 1,643,400 18,600 1,680,300 1,902,900 21,500 1,975,400 2,162,400 24,500 2,183, ,034,800 10,700 1,192,800 1,505,200 15,600 1,601,400 1,787,500 18,600 1,827,600 2,069,700 21,500 2,148,600 2,352,000 24,500 2,374, ,123,000 10,700 1,294,500 1,633,500 15,600 1,737,900 1,939,800 18,600 1,983,300 2,246,100 21,500 2,331,700 2,552,400 24,500 2,577, ,188,700 10,700 1,370,100 1,729,000 15,600 1,839,500 2,053,200 18,600 2,099,200 2,377,400 21,500 2,468,000 2,701,600 24,500 2,727, / ,135,600 10,700 1,306,300 1,651,800 15,600 1,755,000 1,961,500 18,600 2,003,600 2,271,300 21,500 2,355,200 2,581,000 24,500 2,603, ,200 10, ,300 1,241,000 15,600 1,297,500 1,473,700 18,600 1,488,100 1,706,400 21,500 1,746,200 1,939,100 24,500 1,936, ,700 10,700 1,079,100 1,398,900 15,600 1,462,600 1,661,200 18,600 1,677,500 1,923,500 21,500 1,968,300 2,185,900 24,400 2,183, ,069,400 10,700 1,199,900 1,555,600 15,600 1,626,300 1,847,200 18,600 1,865,300 2,138,900 21,500 2,188,700 2,430,600 24,500 2,427, / ,142,200 10,700 1,281,500 1,661,400 15,600 1,736,900 1,972,900 18,600 1,992,100 2,284,400 21,500 2,337,600 2,595,900 24,500 2,592, ,218,800 10,700 1,367,400 1,772,800 15,600 1,853,400 2,105,200 18,600 2,125,700 2,437,600 21,500 2,494,300 2,770,000 24,500 2,766, ,282,200 10,700 1,438,700 1,865,100 15,600 1,949,900 2,214,800 18,600 2,236,400 2,564,500 21,500 2,624,200 2,914,200 24,500 2,910, ,450,000 10,700 1,626,900 2,109,100 15,600 2,205,000 2,504,500 18,600 2,529,000 2,900,000 21,500 2,967,500 3,295,400 24,500 3,291, / ,403,800 10,700 1,568,500 2,042,000 15,600 2,129,100 2,424,900 18,600 2,443,800 2,807,700 21,500 2,866,700 3,190,600 24,500 3,181,400 The performance properties given in these tables are calculated per API 5C3. is based upon minimum material values and average pipe body dimensions. is based upon minimum ultimate strength of the material and the API Buttress formula. Neither Minimum nor include any design or safety factors. Connection = ( PE Wt / Ft ) ( 1.5 ) depth includes a 1.5 design factor however does not consider bending, temperature, buoyancy or other load considerations. 2. TMK

57 Threaded and Coupled without metal to metal seals 2. TMK TMK TMK CWB Application Field High-performance connection TMK CWB designed for drilling casing and well casing of oil and gas fields. Main application: casing while drilling; shales; SAGD drilling Pitch 5,08 α β Gap 1:16 55 Parallel line to the thread axis e

58 ТМK CWB Dimensions Threaded and Coupled without metal to metal seals Wall Thickness The unique design of TMK CWB can provide: 100% tension efficiency 80% compression efficiency 100% bending efficiency High torque connection Flush joint connection Easy make-up and fixing set-load The possibility of multiple make-up without loss of properties API, OTTM, OTTG compatible. Pipe Cross Section Make-Up Loss Length I.D. Critical Cross Section Drift Diameter O.D. Threaded and Coupled without metal to metal seals OD Weight Wall Thickness in lb/ft kg/m in 9 5/8 244,48 (244,5*) 12 3/4 (323,9*) 13 3/8 339,73 (339,7*) Critical Area, 2 Critical Area, 2 ID, OD, Length, Drift Diameter, Make-up Loss, 36 53,57(51,9*) 0,352 8,94(8,9*) ,60 269,88 327,00 222,63 136, ,53(58,0*) 0,395 10,03(10,0*) ,60 269,88 327,00 220,45 136,34 43,5 64,73(63,6*) 0,435 11,05(11,1*) ,60 269,88 327,00 218,41 136, ,94(68,7*) 0,472 11,99(12,0*) ,90 269,88 327,00 216,53 136,34 53,5 79,62(78,7*) 0,545 13,84(13,8*) ,00 269,88 327,00 212,83 136,34 58,4 86,91 0,595 15, ,00 269,88 327,00 210,29 136,34 59,4 88,4 0,609 15, ,30 269,88 327,00 209,57 136,34 64,9 96,58 0,672 17, ,30 269,88 327,00 206,37 136,34 44,42 (66,1*) 0,335 (8,5*) ,70 351,00 327,00 302,93 139,54 49,46 (73,6*) 0,374 (9,5*) ,70 351,00 327,00 300,93 139,54 56,99 (84,8*) 0,435 (11,0*) ,70 351,00 327,00 297,93 139,54 63,97 (95,2*) 0,489 (12,4*) ,70 351,00 327,00 295,13 139,54 71,84 (106,9*) 0,55 (14,0*) ,70 351,00 327,00 291,93 139,54 54,5 81,1(78,6*) 0,38 9,65(9,7*) ,60 365,12 327,00 316,46 136, ,78(88,6*) 0,43 10,92(10,9*) ,60 365,12 327,00 313,92 136, ,19(98,5*) 0,48 12,19(12,2*) ,60 365,12 327,00 311,38 136,34 Representative VME Graph TMK CWB ,15(105,2*) 0,514 13,06(13,1*) ,60 365,12 327,00 309,64 136,34 Pipe Body Connection API Collapse * according to Russian standards 2. TMK

59 ТМK CWB Mechanical Properties 2.6 Threaded and Coupled without metal to metal seals OD Weight Wall Thickness Strenght, кн Internal Pressure, kh Min. Collapse Resistance, MPa in lb/ft kg/m in 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi 9 5/8 244,48 (244,5*) 12,75 (323,9*) 13 3/8 339,73 (339,7*) 36 53,57(51,9*) 0,352 8,94(8,9*) ,3 35,3 41,9 48,5 55,2 61,8 66,2 13,9 16,4 17,0 17,1 17,1 17,1 17, ,53(58,0*) 0,395 10,03(10,0*) ,2 39,6 47,0 54,4 61,9 69,4 74,3 17,7 21,3 22,9 23,9 24,3 24,3 24,3 43,5 64,73(63,6*) 0,435 11,05(11,1*) ,0 43,7 51,8 60,0 68,2 76,4 81,9 22,4 26,3 28,5 30,5 31,9 32,6 32, ,94(68,7*) 0,472 11,99(12,0*) ,5 47,4 56,2 65,1 74,0 82,9 88,8 26,8 32,8 35,1 36,5 38,9 40,6 41,4 53,5 79,62(78,7*) 0,545 13,84(13,8*) ,5 54,7 64,9 75,1 85,4 95,7 102,5 35,4 45,6 50,6 54,8 58,1 60,6 61,8 58,4 86,91 0,595 15, ,0 59,7 70,8 82,0 93,3 104,5 111,9 41,3 54,4 61,3 67,3 72,7 77,2 79,7 59,4 88,4 0,609 15, ,0 61,1 72,5 83,9 95,5 107,0 114,6 43,0 56,9 64,3 70,9 76,8 81,9 84,8 64,9 96,58 0,672 17, ,3 67,4 80,0 92,6 105,4 118,0 126,5 49,3 68,0 77,7 86,7 95,1 102,7 107,4 44,42 (66,1*) 0,335 (8,5*) ,4 25,4 30,1 34,8 39,6 44,4 47,5 47,5 47,5 47,5 47,5 47,5 47,5 47,5 49,46 (73,6*) 0,374 (9,5*) ,5 28,3 33,6 38,9 44,3 49,6 53,1 8,6 8,9 8,9 8,9 8,9 8,9 8,9 56,99 (84,8*) 0,435 (11,0*) ,5 32,8 38,9 45,0 51,3 57,4 61,5 12,1 13,7 13,7 13,7 13,7 13,7 13,7 63,97 (95,2*) 0,489 (12,4*) ,4 37,0 43,9 50,8 57,8 64,7 69,3 15,3 18,3 19,4 19,7 19,7 19,7 19,7 71,84 (106,9*) 0,55 (14,0*) ,7 41,8 49,5 57,3 65,2 73,1 78,3 20,2 23,7 25,8 27,4 27,4 27,4 27,4 54,5 81,1(78,6*) 0,38 9,65(9,7*) ,8 27,4 32,6 37,7 42,9 48,0 51,4 7,6 7,9 7,9 7,9 7,9 7,9 7, ,78(88,6*) 0,43 10,92(10,9*) ,3 31,1 36,8 42,6 48,5 54,3 58,2 10,6 11,5 11,5 11,5 11,5 11,5 11, ,19(98,5*) 0,48 12,19(12,2*) ,8 34,7 41,1 47,6 54,2 60,7 65,0 13,4 15,6 16,1 16,1 16,1 16,1 16, ,15(105,2*) 0,514 13,06(13,1*) ,5 37,1 44,1 51,0 58,0 65,0 69,6 15,4 18,4 19,5 19,9 19,9 19,9 19,9 Threaded and Coupled without metal to metal seals * according to Russian standards 2. TMK

60 TMK CWB Make-up Torque 2.6 Threaded and Coupled without metal to metal seals OD Weight Wall Thickness Make-up Torque, Nm / ft-lb Make-up Torque, Nm / ft-lb 55 ksi 80 ksi 95 ksi 110 ksi 125 ksi 140 ksi 150 ksi min opt max min opt max min opt max min opt max min opt max min opt max min opt max in lb/ft kg/m in Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb Нм ft-lb 9 5/8 244,48 (244,5*) 36 53,57(51,9*) 0,352 8,94(8,9*) ,53(58,0*) 0,395 10,03(10,0*) ,5 64,73(63,6*) 0,435 11,05(11,1*) ,94(68,7*) 0,472 11,99(12,0*) ,5 79,62(78,7*) 0,545 13,84(13,8*) ,4 86,91 0,595 15, ,4 88,4 0,609 15, ,9 96,58 0,672 17, ,42 (66,1*) 0,335 (8,5*) Threaded and Coupled without metal to metal seals 49,46 (73,6*) 0,374 (9,5*) ,75 (323,9*) 56,99 (84,8*) 0,435 (11,0*) /8 339,73 (339,7*) 63,97 (95,2*) 0,489 (12,4*) ,84 (106,9*) 0,55 (14,0*) ,5 81,1(78,6*) 0,38 9,65(9,7*) ,78(88,6*) 0,43 10,92(10,9*) ,19(98,5*) 0,48 12,19(12,2*) ,15(105,2*) 0,514 13,06(13,1*) * according to Russian standards 2. TMK

61 TMK ULTRA DQX Threaded & Coupled Drilling with Casing Connection for High RPM Rotating & Drilling Nose to Nose Positive Torque Stop FullContact Threads Run-Out Threads Threaded and Coupled without metal to metal seals For High RPM Rotating and Drilling Designed for high RPM and high dog leg fatigue resistance in horizontal wells where rotating and reciprocating are the only ways to reach bottom Superior high pressure gas leak resistance Pressure ratings exceed API minimum internal yield and collapse FullContact Threads Tension and compression efficiency High bending capacity and evenly distributed stress Deep, easy stabbing and quick, easy make-up Leak-tight thread sealing Nose to Nose Positive Torque Stop Excellent torque resistance Torque energized metal seal Reduced coupling fatigue Verifiable make-up with positive torque shoulder Superior over-torque drift-ability Minimized flow turbulence Run-Out Threads Maximum critical section area Low interference run-out threads enhance fatigue life 2. TMK

62 ULTRA-DQX Product Suary: Pipe and Connection Data Pipe Body Connection J-55 J-55 L-80 P-110 Q TMK OD in 4 1/ /2 6 5/ /8 8 5/8 9 5/8 10 3/4 11 3/4 13 3/8 Weight lb/ft PE Weight lb/ft Wall Thickness in ID in Drift Dia in PBA in 2 Critical Section Area in 2 Tensile Efficiency % Compression Efficiency % Make-up Loss in OD in Length in lbs % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % % 100 % lbs 2.6 Threaded and Coupled without metal to metal seals Optimal Torque Torque Optimal Torque Torque ft-lbs ft-lbs lbs lbs ft-lbs ft-lbs lbs lbs ft-lbs ft-lbs lbs lbs ft-lbs ft-lbs Optimal Torque Torque Optimal Torque Torque 2. TMK

63 API Pressure /8 through 5 5 1/2 through 8 5/8 OD Weight Internal Pres J-55 L-80 T-95 P-110 Q-125 Collapse Resistance Internal Pres Collapse Resistance Internal Pres Collapse Resistance Internal Pres Collapse Resistance Internal Pres Collapse Resistance OD Weight Internal Pres J-55 L-80 T-95 P-110 Q-125 Collapse Resistance Internal Pres Collapse Resistance Internal Pres Collapse Resistance Internal Pres Collapse Resistance Internal Pres Collapse Resistance 2 3/8 2 7/8 3 1/ / ,700 8,100 11,200 11,780 13,300 13,980 15,400 16,130 17,500 17, ,830 9,170 12,850 13,340 15,260 15,840 17,670 18,340 20,080 20, ,290 10,510 14,970 15,280 17,780 18,150 20,590 21,010 23,390 23, ,960 11,970 17,390 17,410 20,650 20,670 23,910 23,930 27,170 27, ,260 7,680 10,570 11,170 12,550 12,940 14,530 14,550 16,510 16, ,240 9,550 13,440 13,890 15,960 16,490 18,480 19,090 21,000 21, ,310 10,520 15,000 15,300 17,810 18,170 20,620 21,040 23,430 23, ,380 11,470 16,560 16,680 19,660 19,810 22,770 22,940 25,870 26, ,120 12,950 19,090 18,840 22,670 22,370 26,250 25,910 29,830 29, ,990 7,400 10,160 10,540 12,070 12,080 13,970 13,530 15,880 14, ,950 8,330 11,560 12,120 13,730 14,390 15,900 16,670 18,060 18, ,310 10,520 15,000 15,310 17,810 18,180 20,630 21,050 23,440 23, ,090 12,930 19,040 18,800 22,610 22,330 26,180 25,850 29,750 29, ,030 13,690 20,400 19,920 24,230 23,650 28,050 27,390 31,880 31, ,440 5,110 7,910 6,590 9,390 7,310 10,880 7,910 12,360 8, ,300 6,590 9,170 8,800 10,890 9,980 12,610 11,060 14,330 12, ,880 7,300 10,010 10,280 11,890 11,760 13,760 13,160 15,640 14, ,940 8,330 11,550 12,110 13,720 14,380 15,880 16,650 18,050 18, ,140 9,460 13,300 13,760 15,790 16,340 18,290 18,910 20,780 21, ,990 10,230 14,530 14,880 17,250 17,670 19,970 20,460 22,700 23, ,030 12,030 17,500 17,500 20,780 20,780 24,060 24,060 27,340 27, ,790 4,010 6,970 4,940 8,280 5,310 9,580 5,560 10,890 5, ,350 4,960 7,780 6,360 9,240 7,030 10,690 7,580 12,150 8, ,800 5,730 8,430 7,500 10,010 8,410 11,590 9,210 13,170 9, ,200 6,420 9,020 8,540 10,710 9,660 12,410 10,690 14,100 11, ,210 7,620 10,480 11,080 12,450 12,760 14,420 14,340 16,380 15, ,020 8,400 11,670 12,220 13,850 14,510 16,040 16,810 18,230 19, ,130 8,500 11,820 12,370 14,040 14,690 16,260 17,010 18,470 19, ,200 9,510 13,380 13,830 15,890 16,420 18,390 19,010 20,900 21, ,690 10,860 15,560 15,800 18,470 18,770 21,390 21,730 24,310 24, ,870 4,140 7,080 5,140 8,410 5,550 9,740 5,840 11,070 6, ,700 5,560 8,290 7,250 9,840 8,110 11,400 8,850 12,950 9, ,970 7,390 10,140 10,500 12,040 12,020 13,940 13,470 15,840 14, ,850 8,240 11,420 11,990 13,570 14,240 15,710 16,490 17,850 18, ,120 8,500 11,820 12,360 14,030 14,680 16,250 17,000 18,460 19, ,410 8,770 12,240 12,760 14,530 15,150 16,820 17,550 19,120 19, ,200 9,510 13,380 13,830 15,890 16,430 18,400 19,020 20,910 21, ,630 9,900 14,000 14,400 16,630 17,100 19,250 19,800 21,880 22, /2 6 5/ /8 7 3/4 8 5/ ,270 3,120 6,210 3,620 7,380 3,970 8,540 4,230 9,700 4, ,810 4,040 7,000 4,990 8,310 5,380 9,630 5,630 10,940 5, ,320 4,910 7,740 6,290 9,190 6,940 10,640 7,480 12,090 7, ,320 6,620 9,190 8,830 10,910 10,020 12,640 11,110 14,360 12, ,260 7,670 10,560 11,160 12,540 12,930 14,530 14,540 16,510 16, ,330 8,700 12,120 12,650 14,390 15,020 16,660 17,390 18,930 19, ,750 9,090 12,730 13,220 15,110 15,700 17,500 18,180 19,890 20, ,840 10,090 14,310 14,680 16,990 17,430 19,670 20,180 22,350 22, ,180 2,970 6,090 3,480 7,230 3,800 8,370 4,030 9,510 4, ,110 4,560 7,440 5,760 8,830 6,310 10,230 6,730 11,620 7, ,260 4,810 7,650 6,130 9,080 6,750 10,520 7,260 11,950 7, ,060 6,170 8,810 8,170 10,460 9,220 12,120 10,160 13,770 11, ,900 7,320 10,040 10,320 11,920 11,820 13,800 13,230 15,680 14, ,260 7,680 10,570 11,160 12,550 12,940 14,530 14,550 16,510 16, ,630 8,030 11,090 11,670 13,170 13,860 15,250 15,870 17,330 17, ,160 8,540 11,880 12,420 14,100 14,750 16,330 17,080 18,560 19, ,360 3,270 6,340 3,830 7,530 4,150 8,720 4,440 9,910 4, ,980 4,330 7,240 5,410 8,600 5,890 9,960 6,230 11,310 6, ,610 5,410 8,160 7,030 9,690 7,840 11,220 8,530 12,750 9, ,230 6,460 9,060 8,610 10,760 9,740 12,460 10,780 14,160 11, ,850 7,270 9,960 10,190 11,830 11,650 13,700 13,030 15,560 14, ,430 7,830 10,800 11,390 12,830 13,430 14,850 15,130 16,880 16, ,110 8,490 11,800 12,350 14,010 14,660 16,230 16,980 18,440 19, ,590 8,940 12,500 13,010 14,840 15,450 17,190 17,890 19,530 20, ,140 2,890 6,020 3,400 7,150 3,710 8,280 3,920 9,410 4, ,730 3,910 6,890 4,790 8,180 5,130 9,470 5,350 10,760 5, ,430 5,100 7,900 6,560 9,380 7,270 10,860 7,870 12,340 8, ,310 6,610 9,180 8,820 10,900 10,000 12,620 11,080 14,340 12, ,090 7,510 10,320 10,820 12,250 12,410 14,190 13,930 16,120 15, ,510 7,910 10,920 11,510 12,970 13,670 15,020 15,440 17,070 17, ,890 8,280 11,480 12,040 13,630 14,300 15,780 16,550 17,930 18, ,470 9,760 13,770 14,190 16,350 16,850 18,930 19,510 21,520 22, ,390 7,800 10,750 11,340 12,760 13,320 14,780 15,000 16,790 16, ,950 8,330 11,560 12,120 13,730 14,390 15,900 16,670 18,060 18, ,840 9,180 12,860 13,350 15,270 15,850 17,690 18,350 20,100 20, ,460 3,450 6,490 4,100 7,710 4,360 8,930 4,690 10,140 4, ,020 4,400 7,300 5,530 8,670 6,020 10,040 6,400 11,410 6, ,580 5,360 8,120 6,950 9,640 7,740 11,160 8,420 12,680 8, ,220 6,440 9,040 8,570 10,740 9,700 12,430 10,740 14,130 11, ,820 10,970 15,740 15,960 18,690 18,960 21,640 21,950 24,590 24, ,030 12,030 17,500 17,500 20,780 20,780 24,060 24,060 27,340 27, ,640 7,060 9,660 9,660 11,470 11,010 13,280 12,280 15,090 13, ,970 7,390 10,140 10,510 12,050 12,040 13,950 13,490 15,850 14, API Pressure

64 API Pressure 4. Recoended Running Procedures 3. OD Weight Internal Pres 9 5/8 through 13 5/8 J-55 L-80 T-95 P-110 Q-125 Collapse Resistance Internal Pres Collapse Resistance Internal Pres Collapse Resistance Internal Pres Collapse Resistance Internal Pres Collapse Resistance ,520 2,020 5,120 2,370 6,080 2,470 7,040 2,470 8,000 2, ,950 2,570 5,750 3,090 6,820 3,330 7,900 3,470 8,980 3, / ,350 3,250 6,330 3,810 7,510 4,130 8,700 4,420 9,890 4, ,720 3,890 6,870 4,760 8,150 5,090 9,440 5,300 10,730 5, ,450 5,130 7,930 6,620 9,410 7,340 10,900 7,950 12,390 8, ,950 5,990 8,650 7,900 10,280 8,880 11,900 9,770 13,520 10, / ,870 5,860 8,540 7,700 10,150 8,650 11,750 9,490 13,350 10, / ,090 6,230 8,860 8,260 10,520 9,320 12,180 10,290 13,840 11, / ,470 6,870 9,410 9,220 11,170 10,480 12,940 11,650 14,700 12, ,620 7,050 9,630 9,610 11,440 10,960 13,240 12,210 15,050 13, ,580 2,090 5,210 2,480 6,190 2,590 7,160 2,610 8,140 2, ,030 2,700 5,860 3,220 6,960 3,490 8,060 3,660 9,160 3, ,430 3,390 6,450 4,020 7,660 4,300 8,860 4,610 10,070 4, ,880 4,160 7,100 5,160 8,430 5,580 9,760 5,880 11,090 6, ,330 4,920 7,750 6,310 9,200 6,960 10,650 7,510 12,110 7, ,730 1,120 3,970 1,130 4,710 1,130 5,460 1,130 6,200 1, ,070 1,510 4,470 1,630 5,310 1,630 6,140 1,630 6,980 1, / ,560 2,070 5,180 2,450 6,150 2,560 7,130 2,570 8,100 2, ,010 2,660 5,830 3,180 6,920 3,440 8,010 3,610 9,100 3, ,370 3,290 6,360 3,870 7,560 4,180 8,750 4,480 9,940 4, ,770 3,970 6,930 4,880 8,230 5,240 9,530 5,470 10,840 5, / ,720 3,880 6,860 4,750 8,150 5,080 9,430 5,290 10,720 5, ,930 4,250 7,180 5,300 8,520 5,750 9,870 6,070 11,210 6, / ,110 4,550 7,430 5,740 8,820 6,280 10,210 6,700 11,610 6, / ,720 5,590 8,310 7,300 9,870 8,160 11,430 8,920 12,990 9, ,450 1,950 5,020 2,260 5,970 2,340 6,910 2,330 7,850 2, ,700 2,220 5,380 2,670 6,390 2,830 7,400 2,880 8,410 2, / ,960 2,580 5,760 3,100 6,840 3,350 7,920 3,490 9,000 3, ,170 2,950 6,070 3,460 7,210 3,780 8,350 4,000 9,490 4, ,380 3,300 6,360 3,880 7,560 4,180 8,750 4,480 9,940 4, ,500 3,510 6,540 4,190 7,770 4,430 9,000 4,770 10,220 5, / ,140 2,890 6,010 3,400 7,140 3,700 8,270 3,910 9,400 4, / ,420 3,360 6,420 3,980 7,630 4,260 8,830 4,570 10,030 4,800