Rexnord 815 TableTop Chain
|
|
- Marion Burns
- 5 years ago
- Views:
Transcription
1 815 DIRECTION OF TRAVEL Drawing 0.12 in (3.1 mm) Overall 1.69 in (42.9 mm) Guide Clearance 1.75 in (44.4 mm) Rexnord 815 TableTop Photo shows 815 TableTop in Stainless Steel (SS) material. Information Min. Side-flex Radius Approximate desc in mm in mm lbs/ft kg/m 2 1/ / / / / Min. Back-flex Radius 6.50 in (165.1 mm) Pitch Plate Bottom to Bottom 0.38 in (9.5 mm) Pin Diameter Height Over Centerline Available Materials Prefix Temperature Standard Fahrenheit Celsius FDA Strength Material Pin Material Approval dry wet dry wet lbs N Standard Materials S Carbon Steel Carbon Steel NR NR 625 2,780 No SS Stainless Steel Stainless Steel ,780 Yes Made-to-Order Materials SSB Stainless Steel Low Magnetic Stainless Steel ,780 Yes Regulatory Information Additional Notes Based on the material chemistries, industry standards, and the documentation in the Federal Registry, it is the opinion of Rexnord Industries, Inc. that the Rexnord TableTop stainless steel chains can be considered GRAS for direct food contact Rexnord and TableTop are trademarks of Rexnord Industries, LLC. All rights reserved. Stocked in 80 pitch, 10 ft (3.048 m) length strands. Stainless steel is austenitic. strength is listed at room temperature. NR = Not Recommended. For additional material information, see material portfolio. Rexnord 815 Series TableTop Product Portfolio TT Straight Running
2 Rexnord 815 TAB TableTop 815 TAB DIRECTION OF TRAVEL Drawing 0.12 in (3.1 mm) Overall 1.69 in (42.9 mm) Guide Clearance 1.75 in (44.4 mm) Photo shows 815 TAB TableTop in Carbon Steel (S) material. Information Min. Side-flex Radius Approximate desc in mm in mm lbs/ft kg/m 3 1/ / / Min. Back-flex Radius 6.50 in (165.1 mm) Pitch Plate Bottom to TAB Bottom 0.64 in (16.2 mm) Pin Diameter Height Over Centerline Plate Bottom to TAB Top 0.52 in (13.1 mm) Available Materials Prefix Temperature Standard Fahrenheit Celsius FDA Strength Material Pin Material Approval dry wet dry wet lbs N Made-to-Order Materials S Carbon Steel Carbon Steel NR NR 625 2,780 No SS Stainless Steel Stainless Steel ,780 Yes Straight Running TT Regulatory Information Based on the material chemistries, industry standards, and the documentation in the Federal Registry, it is the opinion of Rexnord Industries, Inc. that the Rexnord TableTop stainless steel chains can be considered GRAS for direct food contact Rexnord and TableTop are trademarks of Rexnord Industries, LLC. All rights reserved. Additional Notes Stocked in 80 pitch, 10 ft (3.048 m) length strands. Stainless steel is austenitic. Rexnord 815 TAB TableTop utilizes 881 series sprockets only. strength is listed at room temperature. NR = Not Recommended. For additional material information, see material portfolio. Rexnord 815 Series TableTop Product Portfolio
3 815 TAB Transfer Photo shows 815 TAB TableTop with transfer top plate in Stainless Steel (SS) material. Information Min. Side-flex Radius Approximate desc in mm in mm lbs/ft kg/m 7 1/ DIRECTION OF TRAVEL Min. Back-flex Radius 6.50 in (165.1 mm) Drawing Plate Bottom to TAB Bottom 0.64 in (16.2 mm) Height Over Centerline 0.12 in (3.1 mm) Overall 1.69 in (42.9 mm) Blade 1.00 in (25.4 mm) Plate Bottom to TAB Top 0.52 in (13.1 mm) Guide Clearance 1.75 in (44.4 mm) Rexnord 815 TAB TableTop with Transfer Top Plate Pitch Pin Diameter Available Materials Temperature Standard Fahrenheit Celsius FDA Prefix Strength Material Pin Material Approval dry wet dry wet lbs N Made-to-Order Materials SS Stainless Steel Stainless Steel ,780 Yes Regulatory Information Additional Notes Based on the material chemistries, industry standards, and the documentation in the Federal Registry, it is the opinion of Rexnord Industries, Inc. that the Rexnord TableTop stainless steel chains can be considered GRAS for direct food contact Rexnord and TableTop are trademarks of Rexnord Industries, LLC. All rights reserved. Stocked in 80 pitch, 10 ft (3.048 m) length strands. Stainless steel is austenitic. Rexnord 815 TAB TableTop with Transfer Top Plate utilizes 881 series sprockets only. strength is listed at room temperature. NR = Not Recommended. For additional material information, see material portfolio. Rexnord 815 Series TableTop Product Portfolio TT Straight Running
4 815 Semi-Steel Arm Body Sprocket 815 Semi-Steel Block Body Sprocket NS815 Thermoplastic Split Sprocket and Supplied with guide rings attached in (50.8 mm) 2.16 in (54.9 mm) Rexnord 815 Series TableTop Compatible Sprockets 815 Semi-Steel Arm Body Sprocket Information (Shaft-Ready) () Approximate actual effect in mm in mm lbs kg / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Shaft-ready round bore sprockets are shipped with keyway and setscrew. Metric shaft-ready round bores are shipped with metric hardware, but without setscrews. 815 Semi-Steel Block Body Sprocket Information (Shaft-Ready) () Approximate actual effect in mm in mm lbs kg / / / / / / / / / / / / / / / Shaft-ready round bore sprockets are shipped with keyway and setscrew. Metric shaft-ready round bores are shipped with metric hardware, but without setscrews. NS815 Thermoplastic Split Sprocket Information (Shaft-Ready) (Idler) Approximate actual effect in mm in mm lbs kg / / / / / / / / / / Shaft-ready round bore sprockets are shipped with keyway and setscrew. Metric shaft-ready round bore sprockets are shipped withmetric hardward but without set screws. Idler bores are designed to spin freely on the shaft without keyway or setscrews. TT Rexnord 815 Series TableTop Product Portfolio
5 820 Semi-Steel Arm Body Sprocket Shipped as an 815 semi-steel grooved arm body sprocket. 820 Semi-Steel Block Body Sprocket Shipped as an 815 semi-steel grooved block body sprocket. and NS820 Thermoplastic Split Sprocket 2.00 in (50.8 mm) 820 Semi-Steel Arm Body Sprocket Information (Shaft-Ready) () Approximate actual effect in mm in mm lbs kg / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Shaft-ready round bore sprockets are shipped with keyway and setscrew. 820 Semi-Steel Block Body Sprocket Information (Shaft-Ready) () Approximate actual effect in mm in mm lbs kg / / / / / / / / / / / / / / / Rexnord 815 Series TableTop Compatible Sprockets Shaft-ready round bore sprockets are shipped with keyway and setscrew. NS820 Thermoplastic Split Sprocket Information (Shaft-Ready) (Idler) Approximate actual effect in mm in mm lbs kg / / / / / / / / / / Imperial shaft-ready round bore sprockets are shipped with keyway and setscrew. Metric shaft-ready round bore sprockets are shipped with keyway and no setscrew. Idler bores are designed to spin freely on the shaft. Rexnord 815 Series TableTop Product Portfolio TT
6 815/820 Idler Wheel 2.19 in (55.6 mm) 2.44 in (62.0 mm) Equivalent Tooth Size Outside Diameter 815/820 Idler Wheel Imperial Information Imperial (Idler) Approximate in mm in lbs kg / /16 1 1/4 1 1/ / /16 1 1/4 1 1/ / /16 1 1/4 1 1/ / Rexnord 815 Series TableTop Compatible Sprockets Idler wheels are designed to spin freely on the shaft. 27 tooth idler wheel is available on a made-to-order basis and is subject to imum order requirements. 815/820 Idler Wheel Metric Information Equivalent Tooth Size Outside Diameter Idler wheels are designed to spin freely on the shaft. Metric (Idler) Approximate in mm mm lbs kg TT Rexnord 815 Series TableTop Product Portfolio
7 Guide Rings One set = two guide rings and six assembly screws (Part # ). For 815 and 820 semi-steel sprockets only. Part Number Approximate Sprocket Teeth Carbon Steel Stainless Steel in mm in mm lbs kg W803-AC W803-YYC W805-AC W805-YYC W868-AC W868-YYC W864-AC W864-YYC W863-AC W863-YYC W865-AC W865-YYC W866-AC W866-YYC W867-AC W867-YYC W862-AC W862-YYC W869-AC W869-YYC Rexnord 815 Series TableTop Accessories Rexnord 815 Series TableTop Product Portfolio TT
Rexnord 815 TableTop Chain Straight Running
Prefix S SS SSB 815 Cha Information Cha M. Side-flex Radius Approximate desc /ft / m 2-1/4 2. 57. 2 - - 1.43 2.12 2-5/8 2.63 66. 7 - - 1.60 2.37 3-1/4 82. 6 - - 1.84 2.73 4 4.00 101. 6 - - 2.14 17 4-1/2
More informationRexnord 4705 MatTop Chain Assembled-to-Width
Prefix W WLT BLT MR AS R FR HS W BSM P LUV HUV BWR WX TC Cha 4705 Cha Inforation Cha Capacity Nuber of Sprockets ft of width of width 0% 80% 80% 100% Blue Melt AntiStatic Red Flae Retardant Heat Stabilized
More informationNitro. Quality Power Transmission Products Division of Belarus Tractor International
Division of Belarus Tractor International Quality Power Transmission Products 800-356-2336 Table of Contents Standard ANSI Single Strand: Page 3 Double Strand: Page 4 Triple Strand: Page 5 Quadruple Strand:
More informationSERIES A24 RAISED RIB
SERIES A24 RAISED RIB Eurobelt Series A24 Raised Rib conveyor belt has been designed mainly to be used with finger plates. It has ribs that, sticking out 6 mm above the module, provide a greater resistance
More informationSTRAIGHT RUNNING CHAIN. Sideflexing steel gripper chains
812 815 STRAIGHT RUNNING CHAIN Series 1874 GV Sideflexing steel gripper chains 1874 GV GRIPPER CHAINS with vulcanized rubber pads 9.5 3.1 23.8 31.8 SC 56.5 21 17 7 19.05 19.05 Ø 5.08 Ø 11.91 14.35 25 12.7
More information2000-SERIES MODULAR BELTS
2000-SERIES MODULAR BELTS The 2000-series belt is made for heavy duty applications. The pitch is 2 inch. BENEFITS Heavy duty drive The heavy duty positive drive construction provides optimum belt engagement
More informationSERIES E30 RAISED RIB
SERIES E30 RAISED RIB Eurobelt Series E30 Raised Rib conveyor belt has been designed mainly for making product transfers by using finger plates. Due to its smooth surface of projecting ribs, it is recommended
More informationTsubaki Sprocket Capabilities
Tsubaki Sprocket Capabilities Introduction to Made-to-Order Sprockets At Tsubaki, our commitment is to bring you the highest value in the industry today. Period. And as a full line supplier of power transmission
More informationBelt strength. Available the belt. (kg/m) PP - Polypropylene 2, to [B] PE - Polyethylene 1, to [B]
SERIES E20 FLAT TOP Eurobelt Series E20 Flat Top, due to a closed surface configuration, is the suitable conveyor belt for those applications in which it is not necessary any drainage through the belt
More informationSprockets. Section Contents ROLLER CHAIN DRIVES
Sprockets ROLLER CHAIN DRIVES Section Contents General Description... 266-267 Horsepower Ratings Charts... 268-270 Selection Charts... 271-273 MINIATURE CHAIN SPROCKETS Catalog Number Selections/Dimensions...274
More informationSprocket Selection Guidelines
Sprocket Selection Guidelines Table 1 Information Necessary to Order Sprockets 1. Chain Size Number, type, or drawing number of the chain to be used on the sprocket. (The suitability of a sprocket depends
More informationBelt strength. Available the belt. (kg/m)
SERIES E50 FLAT TOP Eurobelt Series E50 Flat Top, due to its closed surface, completely flat and smooth, avoids any damage and overturn in the product, as well as the resulting line blockage. It is the
More informationdon't print this page!
don't print this page! www.ustsubaki.com Markets and Applications U.S. Tsubaki sprockets are utilized worldwide in many markets and applications, including: Oil and Gas Lumber Mining Primary Metals Material
More informationFlattop. Engineering Manual I Pasteurizers, Warmers, Coolers Version 1.1
Flattop Engineering Manual I Pasteurizers, Warmers, Coolers Version 1.1 Safety Considerations PRODUCT SAFETY: Products designed and manufactured by Rexnord are capable of being used in a safe manner; but
More informationAmmeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni ECB page 3-4 Datasheet: uni ECB C EN Plastic Modular Belt Series uni ECB Type
More informationQ Taper Sprockets (For QD Bushings) Mfg. No. Specifications: 40 JA 19 = #40 Chain, JA Bushing Type, 19 Tooth Sprocket
Q Taper Sprockets (For QD s) 40 JA 19 = #40 Chain, JA Type, 19 Tooth Sprocket 64.00001 40JA15 64.00004 40JA16 64.00007 40JA17 64.00010 40JA18 64.00013 40JA19 64.00016 40SH20 64.00019 40SH21 64.00022 40SH22
More informationHAUGHTON / PEELLE UNITS
Precision Escalator Products, Inc. 147 North Michigan Avenue Kenilworth, New Jersey 07033 1-800-233-0838 IN NJ (908) 259-9009 FAX (908) 259-9013 HAUGHTON / PEELLE UNITS TABLE OF CONTENTS HAUGHTON COMB
More informationU.S. TSUBAKI BS/DIN ROLLER CHAIN
TSUBAKI BS/DIN ROLLER CHAIN BS/DIN Roller Chain These chains are manufactured to International Standards Organization metric dimensions (ISO 606), British Standard (BS 228), and DIN 8187. They are available
More informationOUTER RACE SHIM SPACERS METRIC OUTER RACE SHIM SPACERS. All Dimensions in Millimeters. Material:300 Series Stainless Steel
OUTER RACE SHIM SPACERS Material:300 Series Stainless Steel METRIC OUTER RACE SHIM SPACERS All Dimensions in Millimeters Material:300 Series Stainless Steel 6-16 INNER RACE SHAFT SPACERS 3 /32" To 1 /2"
More informationCHAIN DRIVE Introduction Merits and demerits of chain drives Merits Demerits
70 CHAIN DRIVE Introduction Chain is used to transmit motion from one shaft to another shaft with the help of sprockets. Chain drives maintain a positive speed ratio between driving and driven components,
More informationTSuBAki SPROCKET SOLUTIONS. SproCkeTS For MAXiMuM performance
TSuBAki SPROCKET SOLUTIONS SproCkeTS For MAXiMuM performance 1 TSUBAKI Sprocket Solutions Made IN JAPAN Tsubakimoto Chain Co. based in Japan is the world s largest chain manufacturer with manufacturing
More informationTechnical Data. Luffing Capacities. Luffing Attachment (supersedes 5784)-1217-U2Luffer
1 5802 (supersedes 5784)-1217-U2Luffer Technical Data Luffing Capacities Luffing Attachment CAUTION: This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual
More informationVermeer. Chains. Cutting Teeth. Sprockets. Bearings. Carbide Teeth. Centralized Customer Service: 800/
Tr e n c h e r P a r t s Vermeer Chains Cutting Teeth Sprockets Bearings Carbide Teeth Anoka, Minnesota Atlanta, Georgia Ontario, California Centralized Customer Service: 800/328-2424 w w w. b a l l a
More informationNew Ne w sideflexing BelTs 2555 series
NE 09e New sideflexing BELTS 2 series 1 SIDEFLEXING BELTS PRODUCTION RANGE SERIES MIN. RADIUS/IDTH AVARAGE RATIO PATHS GUIDE SYSTEM APPLICATIONS BELT MATERIAL 2 2T 1, 1, Bidirectional S Bidirectional S
More informationTAZGO DIVISION. Available Services: Shearing, Plate Burning, Saw Cutting, Drilling
TAZGO DIVISION STEEL~STAINLESS~ALUMINUM Beams ~ Channel ~ Flat bar ~ HR Rounds ~ CR Rounds Angle ~ Square Tube ~ Rectangle Tube Pipe~ DOM~ Plate~ HR sheets ~ CR sheets~ Galvanized Sheets ~ Cross Members
More informationINVERTED TOOTH Chains and Sprockets FOR POWER TRANSMISSION
INVERTED TOOTH Chains and Sprockets FOR POWER TRANSMISSION Ramsey Silent Chains For Power Transmission Ramsey Products specializes in the design, manufacture, and application of silent chain drives, also
More information3/16 Pitch Silent Chain P R E C I S I O N E N G I N E E R E D
3/16 Pitch Silent Chain P R E C I S I O N E N G I N E E R E D Ramsey 3/16 Pitch Chain Constructed from hardened, carbon steel or corrosion resistant, 304 stainless steel, Ramsey 3/16" pitch chain and sprockets
More informationPLATE TOP AND GRIPPER CHAINS
PLTE TOP ND GRIPPER CHINS Rexnord has a wide variety of Plate Top and Gripper chains. The roller chain based Plate Top is developed for greater ing capacity and permits even higher speeds and longer runs
More informationOMS Technical Information. Versions OMS. Versions
Versions Versions Mounting flange Shaft Port size European version US version Drain connection Check valve Main type designation Standard flange Cyl. 32 G 1/2 l Yes Yes Cyl. 1.25 in 7/8-14 UNF l Yes Yes
More informationUsing Dividing Plates with the Rotary Table
The premier source of parts and accessories for mini lathes and mini mills. Using Dividing Plates with the Rotary Table Dividing plates allow you to precisely divide a circle into a number of divisions
More informationTrilogy Theory of Operation
INSTALLATION & OVERVIEW... 2 Load Height... 2 Approach Angle... 2 Footprint... 3 Protrusion... 3 Mounting the... 4 General Torque Specs... 4 OPERATION OF BIKE RACK... 5 Loading Bikes... 5 Unloading Bikes...
More informationRocky Mountain Instinct / Pipeline Alloy Frame Assembly Guide. Date: April 7, 2017
Rocky Mountain Instinct / Pipeline Alloy Frame Assembly Guide Date: April 7, 2017 1 Table of Contents Front Triangle Preparation... 4 Parts Needed... 4 Instructions... 4 Chain Stay Preparation... 6 Parts
More informationChain Drives. 1. As no slip takes place during chain drive, hence perfect velocity ratio is obtained
1. Introduction Chain Drives In Belt and Rope drives slipping may occur. In order to avoid slipping, steel chains are used. The chains are made up of a number of rigid links which are hinged together by
More informationOPERATING MANUAL FOR ALL MODELS OF EASY-LOAD PUMP HEADS
OPERATING MANUAL FOR ALL MODELS OF EASY-LOAD PUMP HEADS A-1299-0722 Edition 09 1-800-MASTERFLEX (627-8373) (U.S. and Canada only) 11 (847) 549-7600 (Outside U.S.) (847) 549-7600 (Local) www.masterflex.com
More informationMADE-TO-ORDER SERIES CHAIN
Specialty/Made-o-Order Attachments Standard Straight and Bent Attachment Chain MAE-O-OE SEIES CAIN S iamond M-35, SA1 S1 (one hole) M-1, S1 S2 (one hole) imensions in Inches WI WO PIC S2 S1 B2 B1 A1 1
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. TD0101, TD0101F Description Impact Driver L PRODUCT P 1/ 14 CONCEPT AND MAIN APPLICATIONS Models TD0101 and TD0101F are cost-competitive 100N.m-class impact driver developed
More informationTECHNICAL DATA - ENGINE 89
TECHNICAL DATA - ENGINE 89 13 TECHNICAL DATA - ENGINE Design Displacement (all 400 models) Displacement (all 450 models) Displacement (all 530 models) Stroke (all 400 models) Stroke (all 450 models) Stroke
More informationINVERTED TOOTH Chains and Sprockets FOR POWER TRANSMISSION
INVERTED TOOTH Chains and Sprockets FOR POWER TRANSMISSION Ramsey Silent Chains For Power Transmission Ramsey Products specializes in the design, manufacture, and application of silent chain drives, also
More informationISO 1977 INTERNATIONAL STANDARD. Conveyor chains, attachments and sprockets. Chaînes de manutention, plaques-attaches et roues dentées
INTERNATIONAL STANDARD ISO 1977 Second edition 2006-08-15 Conveyor chains, attachments and sprockets Chaînes de manutention, plaques-attaches et roues dentées Reference number ISO 1977:2006(E) ISO 2006
More informationLivestock Equipment Bale Movers/ Bale Spears. Tractor Linkage. Grade 5 & 8 Hitch Pins. Tractor Linkage
Hooking a piece of equipment to your tractor? Our selection of hitch pins, locking pins, lift arm/top link parts, PTO adapters will keep things connected. Make sure you have an SMV sign to keep everyone
More information3/16 Pitch Silent Chain P R E C I S I O N E N G I N E E R E D
3/16 Pitch Silent Chain P R E C I S I O N E N G I N E E R E D Ramsey 3/16 Pitch Chain Constructed from corrosion resistant, 304 stainless steel, Ramsey 3/16" pitch chain and sprockets are designed to bring
More informationthreaded rod Keystock Diamond Case Linear Shafting strapping seals tools
threaded rod Keystock Diamond Case Linear Shafting strapping seals tools THREADED STEEL ROD... 19-2 KEY STOCK... 19-2 STEEL STRAPPING... 19-3 DIAMOND CASE SHAFTING Carbon (1060) Standard Sizes... 19-4
More informationMeter, PD Series, E3 S1 and E4 S to Present Parts List
Issue/Rev. 0.0 (2/13) Meter, PD Series, E3 S1 and E4 S1 2005 to Present Parts List Bulletin PO01002 9 35 3 39 53 55 57 56 52 54 26 32 37 25 68 48 38 The Most Trusted Name In Measurement 5 31 7 44 42 16
More informationDualDrive. Technical Manual. The Next Step in Belting
DualDrive Technical Manual The Next Step in Belting DualDrive Technical Manual Table of Contents Page 1. Introduction 3 2. Technical Data 4 Volta M Material DualDrive Belts & Fabrication Guidelines 4-5
More informationReplacement parts to fit CHAIN & SPROCKETS CONTENTS. Alphabetical Index Follows
S CONTENTS SECTION S...CS-- through CS--6 Alphabetical Index Follows www.tiscoparts.com fax: (0)356-5487 tel: (0)338-045 204 oods Equipment Company/TISCO All rights reserved. CS-I S ALPHABETICAL INDE C
More informationPrecision Power Transmission Roller Chains, Attachments, and Sprockets
ASME B29.1-2011 (Revision of ASME B29.1 and Partition From ASME B29.100-2002) Precision Power Transmission Roller Chains, Attachments, and Sprockets AN AMERICAN NATIONAL STANDARD ASME B29.1-2011 (Revision
More informationPLEASE NOTE: Pressures for 200mm (8ins) and 250mm (10ins) are based on the use of METALFLEX Braided Braid
METCONAB B-FLEX Stainless Steel Annular Convoluted Hose. A close pitch hose with a high degree of flexibility suitable for most applications and normally supplied. BRAID Single or double layers of Stainless
More informationAsphalt Batch Plant Processing
Asphalt atch Plant Processing ngineered for Asphalt Operations www.ustsubaki.com Asphalt Chain www.ustsubaki.com Asphalt is tough! ard aggregates, shock loads, intense heat, and almost around-the-clock
More informationCompetitive VEX Robot Designer
Competitive VEX Robot Designer Skill Set 2: Builder I Terminal Objective 2.3: build a drift chassis Performance Objective: Given provided VEX components, build a drift chassis that can complete five laps
More informationCHAIN PRODUCTS ALL-MAKES CROSS REFERENCE GUIDE FARM & AGRICULTURAL CONSTRUCTION INDUSTRIAL HEAVY DUTY FARM & AGRICULTURAL EQUIPMENT
CHAIN PRODUCTS ALL-MAKES CROSS REFERENCE GUIDE FARM & AGRICULTURAL CONSTRUCTION INDUSTRIAL HEAVY DUTY FARM & AGRICULTURAL EQUIPMENT PRECISION ROLLER CHAIN The entire range of precision roller chain meets
More informationProfile Design Recommendations
Profile Design Recommendations Gates Mectrol Profile Design 1 Over one thousand profile designs are available from Gates Mectrol s extensive mold inventory. Visit the Gates Mectrol Profile Selector Guide
More informationSECTION BUTTERFLY VALVES
SECTION 15112 BUTTERFLY VALVES PART 1 GENERAL 1.01 SUMMARY A. All butterfly valves shall be of the tight closing, rubber seated type and fully comply with the latest revision of AWWA Standard C504, Class
More informationMECHANICAL DRIVES 1 INTRODUCTION TO CHAIN DRIVES LEARNING ACTIVITY PACKET BB502-XD05AEN
MECHANICAL DRIVES 1 LEARNING ACTIVITY PACKET INTRODUCTION TO CHAIN DRIVES BB502-XD05AEN LEARNING ACTIVITY PACKET 5 INTRODUCTION TO CHAIN DRIVES INTRODUCTION This LAP will begin your study of another method
More informationNEXT GENERATION FLEX FENCE
NEXT GENERATION FLEX FENCE Area To Be Fenced.. With Next Generation Flex Fence any post that is not in a straight line with another post must be braced. Layout your fence installation. Determine all end
More informationWorld Area Differences Technical Information
World Area Differences Technical Information DMISC2047X02 This document is to give more information about the following: Porting & Threads Cleaning Procedures Conversion Tables PORTING & THREADS NPT (National
More informationFASTENERS, CLAMPS & STRAPS
Bands...169 Buckles...170 Cable Ties...171 Clip, Ring & Pin Kits...168 Clips, Rings & Pins...168 Hose Clamps...170,171 Screw Anchor Expanders...168 Strap Tensioners & Adaptors...172 Tie Wire...172 Tie
More informationBS Conveyor Chain - Hollow Bearing Pin Chain
S onveyor Hollow earing in This chain has all the bearing pin hollow. The hollow bearing type chain gives easy facility for fixing attachments to outer links by bolting through the hollow bearing pins.
More informationAttention. Chainguards. Cranks and Chains. Flywheel Sprocket
Attention When ordering parts for newer Schwinn IC Pro cycles reference the following service bulletins to ensure you are ordering the correct revisions. Handlebar and sleeve Chainguards Cranks and Chains
More informationTank Blanketing Pressure Regulators RHPS Series
www.swagelok.com Tank Blanketing Pressure Regulators RHPS Series Types: pressure reducing and vapor recovery 16L stainless steel construction 1/2, 1, and 2 in. end connections Working pressures up to 22
More informationFisher Lever Lock Handlever Actuators for POSI SEAL A81 Rotary Valves
Instruction Manual Lever-Lock Handlever Actuator Fisher Lever Lock Handlever Actuators for POSI SEAL A81 Rotary Valves Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications...
More informationRocky Mountain Instinct / Pipeline Frame Assembly Guide. Date: March 31, 2017
Rocky Mountain Instinct / Pipeline Frame Assembly Guide Date: March 31, 2017 1 Table of Contents Front Triangle Preparation... 4 Parts Needed... 4 Instructions... 4 Chain Stay Preparation... 6 Parts Needed...
More informationManual winch MANISTOR 100 and 200
Manual wall winch Manual winch MANISTOR 100 and 200 Instruction manual UK 173-192.10-3 PRODUCT DEVELOPED AND MANUFACTURED ACCORDING TO NF EN 13157 STANDARD REGISTERED DESIGN To ensure the constant improvement
More informationMODEL DIGITAL ALTIMETER USER'S MANUAL 330KHZ, 1000M DEPTH RATED 0.5 TO 100FT (0.15 TO 30M) OPERATING RANGE SERIAL OUTPUT
MODEL 863-000-200 DIGITAL ALTIMETER USER'S MANUAL 330KHZ, 1000M DEPTH RATED 0.5 TO 100FT (0.15 TO 30M) OPERATING RANGE SERIAL OUTPUT DOCUMENT NO. 430-017C April 14, 2005 S/N IMAGENEX TECHNOLOGY CORP. 209-1875
More informationAMTEC SUPPORT GRIPS STANDARD, HEAVY DUTY & CONDUIT GRIPS
AMTEC SUPPORT GRIPS STANDARD, HEAVY DUTY & CONDUIT GRIPS DESIGNED TO HOLD THE WEIGHT FOR ELECTRICAL CABLE AS IT HANGS IN VERTICAL, SLOPING OR HORIZONTAL POSITIONS. EASILY INSTALLED AND REMOVED USING NO
More informationMLV Mast Series Sectional Tripod Mast, 10-34m (32-110ft)
MLV Mast Series Sectional Tripod Mast, 10-34m (32-110ft) Overview Fully deployed heights of 10, 15, 20, 30 and 34m (32, 49, 65, 98 and 110ft) Heavy duty composite sectional tripod masts capable of supporting
More information829S1 Series Flexflo Pilot
REDQ Regulators The Model 829S1 Provides Versatile Pressure Regulation At An Economical Price. The Model 829S1 Flexflo Pilot is a reversible pressure control regulator (seat & nozzle) that is used in conjunction
More informationMeter, PD Series, E3 S6, S7 All Parts List
Issue/Rev. 0.0 (3/13) Meter, PD Series, E3 S6, S7 All Parts List Bulletin PO01005 32 68 29 17 68 16 14 19 15 68 20 54 22 18 24 58 23 10 59 41 31 56 55 57 47 52 25 27 34 34 26 40 67 44 39 The Most Trusted
More informationsafety Shut-Off Valve HON 721
safety Shut-Off Valve HON 7 product information serving the gas industry worldwide safety shut-off valve HON 7 safety shut-off valve HON 7 Application, Characteristics, Technical Data Application safety
More informationOxygen Measurement Systems High Reliability and Wide Application Coverage
Introduction High Process Efficiency Under Any Condition Oxygen Measurement Systems High Reliability and Wide Application Coverage METTLER TOLEDO provides sensors to measure dissolved oxygen (DO) in demanding
More informationSpecial instruction of installation for SAINT FH-M800/RD-M800 and FH-M805/RD-M805
Technical Service Instructions SI-5VB0E t RD-M805 / RD-M800 Rear derailleur Special instruction of installation for SAINT FH-M800/RD-M800 and FH-M805/RD-M805 A hub axle is an essential component for the
More informationP R O D U C T T E C H N I C A L B U L L E T I N
ASHORH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C E C H N I C A B U E I N CEARAC BE AND DRIVE SYSEM (U.S.
More informationMODEL ANALOG ALTIMETER USER'S MANUAL 330KHZ, 1000M DEPTH RATED 0.2 TO 100FT OPERATING RANGE ANALOG OUTPUT
MODEL 862-000-200 ANALOG ALTIMETER USER'S MANUAL 330KHZ, 1000M DEPTH RATED 0.2 TO 100FT OPERATING RANGE ANALOG OUTPUT DOCUMENT NO. 430-007H September 20, 2005 S/N IMAGENEX TECHNOLOGY CORP. 209-1875 BROADWAY
More informationFisher Lever-Lock Handlever Actuators for POSI-SEAL A81 Rotary Valves
Instruction Manual D103319X012 Lever-Lock Handlever Actuator Fisher Lever-Lock Handlever Actuators for POSI-SEAL A81 Rotary Valves Contents Introduction................................. 1 Scope of Manual.........................
More informationHoses and Lances 20,000 PSI
Jetstream provides a full arrangement of hoses and flex lances for ultra high pressure waterblasting. The hoses and lances are designed to be durable and reliable for any 20,000 psi application. A large
More informationA COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32
A COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32 Component Flat Washers Component Flat Washers The Largest Selection in the World! Steel, Stainless Steel and Brass The standard Flatwasher
More informationDrag Conveyors DRAG CONVEYORS
Drag Conveyors DRAG CONVEYORS PAGE DRAG CONVEYORS.... H-152 FLAT BOTTOM DRAG CONVEYOR.... H-153 H-154 SUPER DUTY DRAG CONVEYOR.... H-155 H-156 ENGINEERING CLASS SPROCKETS.... H-156 MILL DUTY DRAG CONVEYOR...
More informationSpeciÞcations. Engine Dimensions Dimensions in millimeters. Inch equivalents shown in [].
SpeciÞcations Engine Dimensions Dimensions in millimeters. Inch equivalents shown in []. Ê ßÔ Ê ÛÝ Ñ Ê Û ÎÊ Û É 5 ENGINE IDENTIFICATION NUMBERS Kohler engine identiþcation numbers (model, speciþcation
More informationOPERATING MANUAL EASY-LOAD PUMP HEADS
OPERATING MANUAL EASY-LOAD PUMP HEADS A-1299-0377 Edition 14 1-800-MASTERFLEX (627-8373) (U.S. and Canada only) 11 (847) 549-7600 (Outside U.S.) (847) 549-7600 (Local) www.masterflex.com techinfo@coleparmer.com
More informationOPERATION AND INSTRUCTION MANUAL Swivel Anchor Model: SWY100N
OPERATION AND INSTRUCTION MANUAL Swivel Anchor Model: SWY100N IMPORTANT!!! ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH.
More information4400 TwinHybrid Gas Seal
4400 TwinHybrid Gas Seal EQUIPMENT PREPARATION MECHANICAL SEAL INSTALLATION INSTRUCTIONS 1 2 200.005" 0,13 mm 125 µ" 3,2 µm R a 3 4 32 µ" 0,8 µm R a 1000 ±.002" 0,05mm CAUTIONS These instructions are general
More informationDATA SUMMARY McMILLAN TACTICAL TAC-50
DATA SUMMARY McMILLAN TACTICAL EQUIPMENT INTRODUCTION PURPOSE The McMillan Tac-50 Tactical Sniper Rifle System with Accessories provides especially trained personnel with the capability to effectively
More informationTripod. System. User Instructions. 3M Occupational Health and Environmental Safety. Fall Protection Equipment
3M Occupational Health and Environmental Safety Fall Protection Equipment Tripod System User Instructions User Instructions for the 3M TM Tripod System. Important: Keep these User Instructions for reference.
More informationTHIS DOCUMENT SHOULD STAY WITH THE PUMP UNIT AT ALL TIMES!
VERDERMAG Global PC 160L/M/H Maintenance Manual THIS DOCUMENT SHOULD STAY WITH THE PUMP UNIT AT ALL TIMES! TO BE READ IN CONJUNCTION WITH MAINTENACE MANUAL Page 1 of 16 Index 1.0 DOCUMENTATION 1.1 Type
More informationRoller Chain and Sprocket Troubleshooting Guide
Roller Chain and Sprocket Troubleshooting Guide Drive System (Roller Chain and Sprockets) Troubleshooting Guide 1. General Chain is riding up on the sprocket. The roller chain and sprocket do not match.
More informationMate ULTRA IMT Multi Tool Assembly Tooling Installation Instructions
Installation and assembly instructions for Mate ULTRA IMT Multi Tool Punch and Die Holder assemblies. 8-Station is shown. 3-Station uses the same procedure. Lubrication Port Keep top lubricated (for machine
More informationMini Channel & Fittings
Our mini channels and fittings provide for an economical method of supporting light load requirements on a strut system. Channel Channels are cold formed on our modern rolling mills from 18 Ga. (1.2 mm)
More informationINSTRUCTIONS 360 Y-DROP HAGIE STS 2015
INSTRUCTIONS 60 Y-DROP HAGIE STS 05 INSTRUCTIONS 60 Y-DROP HAGIE STS 05 INTRODUCTION Before beginning, it s important to know where each mounting bracket fits relative to the row spacing involved. The
More informationA L T R A I N D U S T R I A L M O T I O N. Synchronous Drives
A L T R A I N D U S T R I A L M O T I O N Synchronous Drives SYNCHRONOUS SPROCKETS & BELTS SECTION C1 C1 1 FEATURES OF SYNCHRONOUS BELT DRIVES Positive Slip-Proof Engagement Because the teeth of the Synchronous
More informationFor Review Only No Copying No Saving No Lending No Posting Online
The following copyrighted samples are provided as a service for your review only. Copying, saving, lending, posting online or any general use of these files other than for the purpose provided is unlawful
More informationAvenger Model 33M Installation & Operation Instructions
Avenger Model 33M Installation & Operation Instructions Manufacturing Contact Information A+ Corporation, LLC Call for expert product application assistance: 41041 Black Bayou Rd. Gonzales, LA 70737 Phone:
More informationSteel Adaptors and Idler Sprockets
Steel Adaptors and Idler Sprockets Detachable Hubs Hub Ref. Min. Bore Max. Bore A B C D E F H App. Wt. D30 8 20 55 45 30 20.0 4.2 4 3.0 0.15 D40 10 26 70 58 40 25.0 5.2 5 5.2 0.32 D50 14 32 80 67 50 32.0
More information(12) Patent Application Publication (10) Pub. No.: US 2005/ A1
(19) United States US 20050272546A1 (12) Patent Application Publication (10) Pub. No.: US 2005/0272546A1 Reiter (43) Pub. Date: Dec. 8, 2005 (54) RIVETED SPROCKETASSEMBLY (75) Inventor: Markus Reiter,
More informationOPERATING MANUAL EASY-LOAD PUMP HEADS
OPERATING MANUAL EASY-LOAD PUMP HEADS Cole Parmer Cole-Parmer Instrument Co. 1-800-MASTERFLEX (627-8373) (U.S. and Canada only) 11 (847) 549-7600 (outside U.S.) (847) 549-7600 (Local) www.masterflex.com
More informationSPOOLER INSTRUCTIONS. STEP 12 If you are going to paint your posts, that should be done at this time.
STEP 4 Starting where you marked the end post location, move down your fence line 6 feet and make another mark. This mark is where your second upright post will be installed. Continuing down the fence
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Conveyor Wear Bed T- Chain Guides and Wear Beds Valu Guide rail can be used as a guide or wear strip for wide
More informationNEXT GENERATION SKWEZLOC CONCENTRIC LOCKING FOR IMPROVED LOCK RELIABILITY
H L C B G A D NEXT GENERATION SKWEZLOC CONCENTRIC LOCKING FOR IMPROVED LOCK RELIABILITY DESIGNED FOR COMMERCIAL (TURNED & POLISHED) SHAFTING Improved Lock Reliability on Turned Ground & Polished (TG&P)
More informationApex 3 Theory of Operation
Apex 3 INSTALLATION & OVERVIEW... 2 Load Height... 2 Approach Angle... 2 Footprint... 3 Protrusion... 3 Mounting the Apex3... 4 General Torque Specs... 5 OPERATION OF BIKE RACK... 6 Loading Bikes... 6
More informationunittool punch & die company TOOLING for Fabricating & Duplicating Type Machines H&O DIE SUPPLY, INC
CATALOG F&D-91 TOOLING for Fabricating & Duplicating Type Machines INTRODUCING New! 1/2" & 5/8" Drop In Tooling unittool punch & die company TOOLING FOR FABRICATING & DUPLICATING TYPE MACHINES Manufactured
More informationCrossed Roller Bearings Series Crossed Roller Bearings Series:
Crossed Roller Bearings Series Crossed Roller Bearings Series: Proprietary 2V Grinding Technology 102 Crossed Roller Bearing Series: Overview High Precision Bearing Sets Proprietary 2V Grinding Technology
More informationtubular EntrancE sets 6
tubular entrance sets Item Qty Part No. Part Name 1 1 6420.xxx.00052 Cylinder Collar 2 1 6420.xxx.00012 Large Plate 3 1 6420.xxx.00022 Small Plate 4 1 2598.xxx.00013 Door Pull 5 1 5300.xxx.95115 Thumbpiece
More information