Terminal Head Section User Guide
|
|
|
- Blake Curtis
- 6 years ago
- Views:
Transcription
1 Example: Terminal Heads Terminal Head Section User Guide Ø Ø52 Process Conduit Entry Entry KNC 3/4 M20 x IP6 200 o C Product Photograph 14 Technical Drawing (measurements in mm) 55 To suit Terminal Blocks with this key code (see pages 15 to 25 for reference). Ingress Protection (IP) rating Temperature rating Terminal Head component breakdown: Silver painting as standard (RAL 9006) Cable Gland (aluminium) *O-Ring (for tight sealing) Material Temp Rating EPDM 140 o C (supplied) SILICON 160 o C VITON 210 o C Conduit Entry *Rubber bush. Process Entry *Please note - the temperature rating of the seal and bush is often lower than that of the head material. Higher temperature materials on request. Temperature Technology Ltd. 2
2 Aluminium Heads DINA Equivalent to AA Ø Ø2 BUZ-H Equivalent to DANAW Ø4 114 Ø56 H-DINA 1/2 BSP M20 x H-DINA mm M20 x H-DINA mm M20 x H-DINA mm M20 x H-DINA22.5-PG mm PG H-DINA mm M20 x M24x1.5P H-DINA-M24 M24 x 1.5 M20 x H-DINA-INT* 9mm M20 x mm * Black painting YCE (Double cable entry head) Ø100 H-YCE 1/2 BSP M20 x H-YCE-M24 M24 x 1.5 M20 x Ø52 H-YCE-NPT 1/2 NPT M20 x mm 40 o C Supplied without cable gland and bush. KNH(S) H-KNH-S 1/2 BSP M20 x H-KNH-M24-S M24 x 1.5 M20 x H-KNH-NPT 1/2 NPT M20 x Ø Supplied with screw fastening as standard Can house two transmitters/terminal blocks. Lever kit available 0.5 / 1.19 H-BUZH-S 1/2 BSP M20 x H-BUZH-S-M24 M24 x 1.5 M20 x H-BUZH-S-NPT 1/2 NPT M20 x BUZH-S mm M20 x BUZH-S-M24-12NPT M24x1.5 1/2 NPT Supplied with screw fastening as standard Can house two transmitters/terminal blocks. Lever kit available 0.5 / Temperature Technology Ltd.
3 Aluminium Heads KNP(S) Ø2 93 H-KNP-S 1/2 BSP M20 x H-KNP-S-34 3/4 BSP M20 x Ø3 Lever kit available 0.5 / 1.2 KNG Ø93 92 Ø37 H-KNG 1/2 BSP M20 x H-KNG-34 3/4 BSP M20 x Ø43 KNL-E Ø H-KNL-E 1/2 BSP M20 x Ø35 KNE Ø 3 Please Note: All list prices are subject to change. Check website for up to date information Ø 2 IP6 40o C H-KNE 1/2 BSP M20 x H-KNE-LC 1/2 BSP 1/2 BSP H-KNE-34 3/4 BSP M20 x H-KNE-5 5/ bore M20 x H-KNE-7 7/ bore M20 x H-KNE-M20 M20 x 1.5 M20 x H-KNE-NPT 1/2 NPT 1/2 NPT H-KNE-M24 M24 x 1.5 M20 x H-KNE-1 1 bore M20 x H-KNE-NPTM20 1/2 NPT M20 x H-KNE-EPOXY* 1/2 BSP M20 x H-KNE-12-M25 1/2 BSP M25 x H-KNE-BLUE** 1/2 BSP M20 x *Epoxy painted **RAL 05 Temperature Technology Ltd. 4
4 Aluminium Heads BUZ Equivalent to DANA Ø4 H-BUZ-S 1/2 BSP M20 x Ø56 Ø4 H-BUZ-S mm bore M20 x H-BUZ-S-NPT 1/2 NPT M20 x H-BUZ-S-M24 M24 x 1.5 M20 x H-BUZ-S-M24- PG16 M24 x 1.5 PG H-BUZ-S mm bore M20 x Ø56 Supplied with screw fastening as standard. Lever kit available 0.5 / 1.19 BUZ-W Equivalent to DANAwin Ø4 Ø44 H-BUZ-W-S 1/2 BSP M20 x Window version for viewing transmitter. Lever kit available 0.5 / 1.19 SUZ Equivalent to NAA 73 Ø47.5 Ø6.2 H-SUZ-S 1/2 BSP M20 x H-SUZ-S-M24 M24 x 1.5 M20 x H-SUZ-M20 M20 x 1.5 M20 x H-SUZ mm bore M20 x mm 40 o C 4 Supplied with screw fastening as standard. Lever kit available 0.5 / 1.19 Contact our Sales Team for assistance. Tel: +44(0) Fax: +44(0) We welcome your enquiries for any Head not listed. 5 Temperature Technology Ltd.
5 Aluminium Heads KF Wall Mounted H-KF 1/2 BSP M20x Ø 2.5 Ø 34 H-KF-34-M20 3/4 BSP M20x H-KF /4 BSP 1/2 BSP H-KF-M20-M20 M20x1.5 M20x Please Note Discounts can be given off all list prices dependent upon quantity. H-RTUBE H-M20PLUG H-12PLUG Description Radiation Tube x 22mm (NPB) Plug - M20 Thread (6mm bore) Plug -1/2 BSP Thread (6mm bore) H-34PLUG Plug - 3/4 BSP Thread (6mm bore) KNC Ø H-KNC-34 3/4 BSP M20 x Ø3 KNA-E Ø2 1.5 H-KNA-E 1/2 BSP M20 x IP67 40 o C 55 Ø35 KMC Ø Ø 27 H-KMC 1/2 BSP M20 x H-KMC-14 1/4 BSP M20 x H-KMC-M16 M16 x 1.5 M16 x Ø 35 Temperature Technology Ltd. 6
6 Aluminium Heads KD (Din Form B) Equivalent to BA 72 Ø 42 Ø 2 Ø 72 IP6 40 o C H-KD 1/2 BSP M20 x H-KD-M M x 1.25 M20 x H-KD-M20 M20 x 1.5 M20 x H-KD-M22 1/2 BSP M22 x H-KD-M24 M24 x 1.5 M20 x H-KD-PG16 1/2 BSP PG H-KD-NPT-PG16 1/2 NPT PG H-KD-M10-PG16 M10 x 1.0 PG H-KD-M12-PG16 M12 x 1.0 PG H-KD-6 6mm bore M20 x H-KD mm bore M20 x H-KD mm bore M20 x H-KD-M24- BLUE(RAL05) M24 x 1.5 M20 x KSE 64 3 Ø 23 Ø 61.5 H-KSE 1/ BSP M16 x H-KSE-14 1/4 BSP M16 x H-KSE-12 1/2 BSP M16 x H-KSE-M16 M16 x 1.5 M16 x Ø mm MAXT Ø4. H-MA-XT M20 x 0.75 M16 x Ø.2 20mm IP66 40 o C.5 30 MA Small Aluminium Head, M20 x 0.75 externally threaded process. MA Equivalent to MAA Ø.2 Ø4. 20mm IP66 40 o C H-MA M10 x 1.0 M16 x H-MA-1 1/ BSP M16 x Temperature Technology Ltd.
7 Aluminium Heads KAA H-KAA H-G-M16 Description Aluminium Angled Entry Head M16 x M16 M16 cable gland with rubber bushing Ø mm 40 o C Supplied without cable gland and bush. TL Large version (PE - 1/2 BSP) TL-2P-C Description TL Head with ceramic 2 way block Ø 30 Also available with Bakelite terminal block. TS Small version (PE - 1/4 BSP) TS-2P-C Description TL Head with ceramic 2 way block Ø 19 Also available with Bakelite terminal block. KNN Plastic Heads 7 Ø 2 H-KNN 1/2 BSP M20 x H-KNN-M24 M24 x 1.5 M24 x IP o C Ø 3 Glass Filled Nylon. Temperature Technology Ltd.
8 Plastic Heads KPP (FDA Approval) Ø 2 7 H-KPP 1/2 BSP M20 x H-KPP-NPT 1/2 NPT M20 x IP6 165 o C Ø 3 White Polyproplene. KPP-B (FDA Approval) 7 Ø 2 H-KPP-B 1/2 BSP M20 x IP6 165 o C Ø 3 Black Polypropylene. KB Ø IP6 10 o C H-KB 1/2 BSP M20 x Ø 3 Bakelite. KBS Ø Ø H-KBS 1/4 BSP 3/ BSP mm IP6 10 o C Ø Bakelite. 9 Temperature Technology Ltd. Please Note: All list prices are subject to change. Check website for up to date information
9 Cast Iron Heads KI Ø 37 Ø 6.5 H-KI 1/2 BSP M20 x H-KI-34 3/4 BSP M20 x H-KI-NPT 1/2 NPT M20 x H-KI-M24 M24 x 1.5 M20 x Ø 43 IP o C CCI NEMA 4X Approval Ø6 7 4 Ø36 45mm IP o C H-CCI 1/2 BSP M20 x Stainless Steel 316 Heads CLS 39 Ø30 Ø54 77 H-CLS 1/2 BSP M20 x mm IP (34) Supplied without cable gland and bush. CSS NEMA 4X Certified Ø7.5 7 H-CSS 1/2 BSP M20 x mm 45mm 45 Temperature Technology Ltd. 10
10 Stainless Steel 316 Heads LS Ø2 H-LS 1/2 BSP M20 x H-LS-M20 M20 x 1.5 M20 x H-LS-M25 1/2 BSP M25 x H-LS-NPT 1/2 NPT M20 x H-LS-NPT-NPT 1/2 NPT 1/2 NPT Ø H-LS-34 1/2 BSP 3/4 BSP IP6 SBUZ Ø4 H-SBUZ 1/2 BSP M20 x Ø56 IP6 SBUZ-H L Ø76.2 H-316L 1/2 BSP M20 x H-316L-NPT 1/2 NPT M20 x Lever kit available 0.5 / 1.19 Ø4 Ø56 H-SBUZH 1/2 BSP M20 x H-SBUZH-NPT 1/2 NPT M20 x IP6 Lever kit available 0.5 / IP6 1 Can house two transmitters/terminal blocks. 11 Temperature Technology Ltd. Please Note: All list prices are subject to change. Check website for up to date information
11 Ø4.4 THRU. Ø7.2x5H A2 A1 B2 b2 B1 b A2 A1 B2 b2 B1 b A2 A1 B2 b2 B1 b Terminal Heads Stainless Steel 316 Heads KFS Ø 2.5 Ø 34 H-KFS 1/2 BSP M20 x IP6 BLS 91 Ø6 H-BLS 1/2 BSP M20 x H-BLS-M25 1/2 BSP M25 x IP6 49 Supplied without cable gland and bush. SEG Equivalent to BEG 42.5 Ø5 Ø H-SEG M24 x 1.5 M20 x H-SEG-12 1/2 BSP 1/2 BSP H-SEG-12-M20 1/2 BSP M20 x Highly polished. SS Ø Ø 23 Ø Remember! 27mm IP o MC Type Block (Screw with clamp) C H-SS 1/4 BSP M16 x H-SS-12 Terminal 1/2 BSP Blocks M16 x M S e r i e s fixings to accompany Terminal Heads with this keycode. MC-2P-C MC-3P-C MC-4P-C MC-6P-C 2-Ø4.4 THRU. Ø7.2x5H Poles Material MC-2P-C 2 45% AI MC-3P-C 3 45% AI MC-4P-C 4 45% AI MC-6P-C 6 45% AI Ø4.4 THRU. Ø7.2x5H 2-Ø4.4 THRU. Ø7.2x5H Check which Terminal Blocks suit which Heads by looking at the coloured dots. MD Type Block (Solder Lug) 2-Ø4.4 2-Ø4.4 2-Ø4.4 2-Ø4.4 fixings to accompany Terminal Heads with this keycode. Poles Material MD-2P-C 2 45% AI MD-3P-C 3 45% AI MD-4P-C 4 45% AI MD-6P-C 6 45% AI MD-2P-C MN Type Block (No through hole) MD-3P-C MD-4P-C MD-6P-C Temperature Technology Ltd. 12
12 Ex d Terminal Heads Component Certified, flameproof Ex d terminal heads. Available with ATEX and FM certification. Standards: ATEX 94/9/EC, EN 01, EN US (NEC 0) FM3600, CSA C22.2 No. 0, FM3615, C22.2 No.30 XDS Stainless Steel. 111 C o n d u i t E n t r y 97.6 ATEX/FM approval PE CE XDS-A-12BSP-M20 ATEX ½ BSP M20x XDS-A-12NPT-12NPT ATEX ½ NPT ½ NPT XDS-F-12NPT-12NPT FM ½ NPT ½ NPT mm IP6 P r o c e s s E n t r y Bush and flame path collar available upon request (see below). EC Certificate No. Rating: BSI 07 ATEX U EEx d IIC T6 IP6 Ex td A21 T100 C IP6 FM Certificate: Rating: NEC 0 EXPLOSIONPROOF Class I, Division 1, Groups A, B, C, D, T6 Class I, Division 1, Groups E, F, G, T6 Class III, Type 4X XDA Aluminium, Epoxy paint RAL C o n d u i t E n t r y 97.6 P r o c e s s E n t r y ATEX/FM approval PE CE XDA-A-12BSP-M20 ATEX ½ BSP M20x XDA-A-12NPT-12NPT ATEX ½ NPT ½ NPT XDA-A-34BSP-M20 ATEX ¾ BSP M20x XDA-A-M24-M20 ATEX M24x1.5 M20x XDA-F-12NPT-12NPT FM ½ NPT ½ NPT XDA-F-12NPT-34NPT FM ½ NPT ¾ NPT mm IP6 40 o C Flamepath collar, 5.00/pc 6./pc, and Bush, 5.00/pc 6./pc. EC Certificate No. Rating: BSI 07 ATEX U EEx d IIC T6 IP6 Ex td A21 T100 C IP6 FM Certificate: Rating: NEC 0 EXPLOSIONPROOF Class I, Division 1, Groups A, B, C, D, T6 Class I, Division 1, Groups E, F, G, T6 Class III, Type 4 Contact our Sales Team for assistance. Tel: +44(0) Fax: +44(0) We welcome your enquiries for any Head not listed. 13 Temperature Technology Ltd. Please Note: All list prices are subject to change. Check website for up to date information
13 Custom Heads Terminal Heads SS, Aluminium, CI, Plastics Heads Tailor made to suit specific requirements Various process and conduit entries available Colour painting to RAL no s Epoxy Coating Available New designs can be tooled from sample or drawing (subject to MOQ). TTL *Certification on all heads available upon request* T T L Company name molding available Temperature Technology Ltd. 14
Tapped exhaust port. Sturdy, simple, reliable design. Easy to add on Feedback. High gain pilot valve. Simple calibration, external zero adjustment
Electropneumatic Positioner Sturdy, simple, reliable design High gain pilot valve Built in gauge ports Tapped exhaust port Easy to add on Feedback Unit F5 Simple calibration, external zero adjustment Bright
Hydrostatic. Continuous level measurement. Overview Page 188 VEGAWELL 52 Page 190 VEGABAR 86, 87 Page 192 Accessory Page 196 AL-EN
Hydrostatic Continuous level measurement 8 Overview Page 188 VEGAWELL 52 Page 190 VEGABAR 86, 87 Page 192 Accessory Page 196 187 Hydrostatic Level and pressure measurement Measuring principle The pressure
9700 Transmitter Submersible hydrostatic level transmitter
Specification sheet IP0078 October 2007 Level 9700 Transmitter Submersible hydrostatic level transmitter Description The 9700 series hydrostatic level transmitter is designed to perform in the most arduous
Differential pressure
Differential pressure 9 Overview Page 200 VEGADIF 65 Page 202 Chemical seal Page 204 Accessory Page 208 199 VEGADIF For differential pressure, level and flow measurements Measuring principle The sensor
SITRANS P measuring instruments for pressure
SITRANS P measuring instruments for pressure Z series for gage pressure Siemens AG 008 Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and
enclosures to ATEX and enclosures for special custom design (EEx p and NEMA cabinets)
enclosures to ATEX and enclosures for special custom design (EEx p and NEMA cabinets) Stainless steel and plastic enclosures for use in potentially explosive environments R Rittal system partners Perfect
Electropneumatic Positioner and Pneumatic Positioner Type 3760 JIS
Electropneumatic Positioner and Pneumatic Positioner Type 3760 Application Single-acting positioners for direct attachment to pneumatic control valves. Supplied with an electric input signal of 4 to 20
Pressure Measurement Single-range transmitters for general applications
Siemens AG 206 Overview Design Device structure without explosion protection The pressure transmitter consists of a piezoresistive measuring cell with a diaphragm installed in a stainless steel enclosure.
Pressure Measurement. Transmitters for basic requirements SITRANS P Z for gauge pressure. 2/4 Siemens FI Overview
f gauge pressure Siemens AG 010 Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and electronics plate Process connection Electrical connection
enclosures to ATEX and enclosures for special custom design (EEx p and NEMA cabinets)
lri030784900.eps lri031083400.eps enclosures to ATEX and enclosures for special custom design (EEx p and NEMA cabinets) fri040466500.eps Stainless steel and plastic enclosures for use in potentially explosive
Level transmitter LT 100
KROHNE 09/2001 7.02363.21.00 GR/PRINTO Level transmitter LT 100 Status: 10/99 Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic flowmeters Mass flowmeters
Series INTELLIGENT PRESSURE- AND LEVEL TRANSMITTERS For all industries. Description ALL STAINLESS DESIGN
INTELLIGENT PRESSURE- AND LEVEL TRANSMITTERS For all industries Series 2000 ALL STAINLESS DESIGN EASY CALIBRATION WITHOUT TEST PRESSURE BY 3 PUSH BUTTONS ACCURACY 0,1% 4-20 ma AND HART PROTOCOL ATEX II
C-Flow Coriolis Mass Flow Meters
Coriolis Mass Flow Meters Ready for Take Off The New Compact C-Flow Küppers Elektromechanik GmbH The C-Flow The C-Flow Coriolis Mass Meters consist of two components: KCE Transmitter KCM Transducer 2 KEM
Expert Hydrostatic Level Transmitters
Expert Hydrostatic s General Features MJK Expert hydrostatic level transmitters are designed for level measurement by submerging the transmitter in open channels, drains and tanks. Expert hydrostatic level
Operating Instructions
Operating Instructions Light-metal Ex d enclosures / flameproof enclosure > 8265/0 Empty enclosure > 8265/4 Control panel, integrated in Ex e enclosure > 8265/5 Control panel Table of Contents 1 Table
2 Overview. SITRANS P measuring instruments for pressure. Transmitters for gage and absolute pressure. Z series for gage pressure
Z series for gage pressure Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and electronics plate Process connection Electrical connection
E10 E10 E10 E10 E10 E10 E10 E10 E10 E10 E10 E10 E10 E10. Cable gland Series 8161/7, 8161/8. Installation Equipment and Accessories E10/1.
> Explosion protection type "Increased safety" > Degree of protection IP68 > Ex e and Ex i versions > Integrated blind plug (accessory) for closing unused cable glands > Cable diameter ranges from 1 to
Electropneumatic Positioner and Pneumatic Positioner Type 3760 JIS
Electropneumatic Positioner and Pneumatic Positioner Type 3760 Application Single-acting positioners for direct attachment to pneumatic control valves. An electric standardized signal of 4 to 20 ma or
Series INTELLIGENT PRESSURE- AND LEVEL TRANSMITTERS For all industries. Description ALL STAINLESS DESIGN
INTELLIGENT PRESSURE- AND LEVEL TRANSMITTERS For all industries Series 2000 ALL STAINLESS DESIGN EASY CALIBRATION WITHOUT TEST PRESSURE BY 3 PUSH BUTTONS ACCURACY 0,1% 4-20 ma AND HART PROTOCOL ATEX II
Cable entries. Contents. Cable entries. Cable entries Introduction L.2 L.1. Standard cable glands - Plastic L.5. Standard cable glands - Brass L.
Contents Introduction.2 Standard cable glands - Plastic.5 Standard cable glands - Brass.7 EMC cable glands.14 Standard cable glands - Stainless steel.16 Cable glands for Ex applications - Brass.17 Adaptors.18
EX-RECESSED CEILING LIGHT FITTINGS
EX-RECESSED CEILING LIGHT FITTINGS RLF/RLF-INOX 250 18-58 W / RLF/RLF-INOX 250... N 18-36 W Metallic design for Zone 1 and Zone 21 The RLF... explosion-protected recessed ceiling light fittings with electronic
Electropneumatic Positioner Type 4763 Pneumatic Positioner Type 4765
Electropneumatic Positioner Type 4763 Pneumatic Positioner Type 4765 Application Single-acting positioner for attachment to pneumatic control valves. Supplied with either an electric input signal from
3000 Series OPTIMASS Mass Flowmeter. Stainless Steel Hastelloy
KROHNE 07/2005 7.02446.25.00 GR 3000 Series OPTIMASS Mass Flowmeter with single Z-shaped measuring tube Stainless Steel Hastelloy Status: 10/99 One tube no limits No limits with tube material No limits
Torque Tube TB300 Digital Transmitters
Page 1 of 7 7E.300-E Issue 4-2009 Description Series TB300 torque tube liquid level instruments utilize the buoyancy exerted on a displacer when immersed in a liquid. The buoyancy on the displacer is proportional
Ultrasonic. 58 Overview VEGASON 60 VEGASON 61, 62, 63
Ultrasonic 58 Overview VEGASON 60 VEGASON 61, 62, 63 57 Overview VEGASON Area of application The ultrasonic sensors of the VEGASON series are suitable for non-contact level measurement of liquids and bulk
Junction Boxes Series 8118
> Enclosure in glass fibre reinforced polyester resin > 3 different sizes available with 4, 5 or as a junction box with integrated miniature fuse: 3 terminals and 1 miniature fuse 7 terminals and 1 miniature
February Cable glands For general industry and hazardous areas
February 2017 Cable glands For general industry and hazardous areas Introduction When safety matters, there is only one choice The Nicote and Kopex range of cable glands come to ABB through the acquisition
Magnetic level switch type MR783 Instruction Manual
Magnetic level switch Magnetic level switch type MR783 1. DESCRIPTION page 3 1.1 Operation page 3 1.2 Application page 3 1.3 Description page 3 2. SPECIFICATIONS page 3 2.1 Service Conditions page 4 2.2
A Higher Level of Performance. Data Sheet. Series Pressure and Level Transmitters. For more information, please visit >
A Higher Level of Performance Data Sheet Pressure and Level Transmitters For more information, please visit > www.hawkmeasure.com Description Intelligent pressure and level transmitters for all industries
OSAT Series. Intrinsically Safe Infrared Temperature Sensor Operator's Guide
OSAT Series Intrinsically Safe Infrared Temperature Sensor Operator's Guide Issue L Jan 2017 Introduction OSAT Series intrinsically safe non-contact infrared temperature sensors measure the temperature
Pressure & Temperature Switches
Pressure & Temperature Switches The User Friendly Generation General Bulletin TEMPERATURE SWITCHES BETA TEMPERATURE SWITCH The BETA Temperature Switch is a pressure switch incorporating a sealed 2-phase
Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron EN GJL 250 body. Reinforced lug for DN200 :
Reinforced lug for DN200 : Size : Ends : Min Temperature : Max Temperature : DN 50 to 200 mm Between flanges ISO PN10/16 ( PN10 for DN200 ) - 10 C + 110 C Max Pressure : 10 Bars Specifications : Long neck
DMK 458. Pressure Transmitter for Marine and Offshore. Ceramic Sensor. accuracy according to IEC 60770: standard: 0.25 % FSO option: 0.
Pressure Transmitter for Marine and Offshore Ceramic Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0. % FSO Nominal pressure from 0... 40 mbar up to 0... 0 bar Output signals -wire:
Mobrey 9700 Transmitter Submersible Hydrostatic Level Transmitters
Product Data Sheet Mobrey 9700 Transmitter Mobrey 9700 Transmitter Submersible Hydrostatic Level Transmitters Hydrostatic electronic level transmitters Factory sealed and tested for submersed duty 4 20
MJK Expert 700 / 800 / 900 / 7070 / 7060 MJK Expert 1400 / 3400
MJK Expert 700 / 800 / 900 / 7070 / 7060 MJK Expert 1400 / 3400 Submersible Hydrostatic s Rugged and versatile 2.75 GB 2.75 Expert 090311 We reserve the right to continuously improve our products and make
Single and double acting, magnetic, self-centering Bores: ø 16, 20, 25, 32, 40 mm
> Series CGPT self-centering parallel grippers with T-guide Series CGPT self-centering parallel grippers with T-guide Single and double acting, magnetic, self-centering Bores: ø 6, 20, 25, 32, 40 mm New
Position switches FP series
A Position switches FP series Selection diagram 0 08 8 9 0 0 0 Ø 8 mm Ø, mm external rubber stainless steel stainless steel fiber glass rod gasket sphere sphere adjustable lever safety adjustable lever
INDUSTRIAL. Pressure Transmitters. Product Guide. Low cost to high accuracy portfolio. Ranges from 70 mbar to 1400 bar. Flexible, rugged and reliable
INDUSTRIAL Pressure Transmitters Product Guide Low cost to high accuracy portfolio Ranges from 70 mbar to 1400 bar Flexible, rugged and reliable Fixed and rangeable 4-20mA outputs Electrical/pressure connection
High-performance submersible pressure transmitter For level measurement Model LH-10
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-10 WIKA data sheet PE 81.09 Applications Level measurement in rivers and lakes Deep well
Operating Instructions
Operating Instructions Ex d Enclosures in Light Metal / Flameproof Encapsulation > 8265/0 Empty Enclosure > 8265/4 controller, installed in Ex e enclosure > 8265/5 controller Contents 1 Contents 1 Contents...2
Technical Datasheet. D Series SMART Pressure Transmitter Model: DPC D-Series. Key Features. Series Overview. Product applications
Technical Datasheet D Series SMART Pressure Transmitter Model: DPC-2000 Key Features ATEX - Flameproof and Intrinsically Safe IECEx - Flameproof and Intrinsically Safe SIL 2 certificate Compliant to NAMUR
GUELL ZERO LED floodlights MADE IN ITALY
GUELL ZERO - 1-2 - 3 LED floodlights MADE IN ITALY GUELL ZERO LED floodlight for indoor and outdoor lighting, comprising: Die-cast aluminium housing chemically pre-treated and painted with polyester powder
ZUERCHER BR Series LOW PRESSURE IN-LINE & ANGLE-PATTERN TANK PRESSURE REDUCING REGULATORS
Pressure/Vacuum Rating Max inlet pressure: 16 Barg Max back-pressure: 2 Barg Vacuum tight. Leak Tight to EN 12266-1:2003 Leakage rate A For T = -10 C to +150 C: Leakage rate A For T = -20 C to -10 C: Leakage
XCE: Explosionproof Control Enclosures
XCE SERIES XCE: Explosionproof Control Enclosures FEATURES 64 standard sizes available Pre-drilled for hinges (hinges optional) Pre-drilled for sub-panel (sub-panel optional) One-piece, NEMA 4 water-tight
LEVEL Transmitters. ) of the liquid column above it and the atmospheric pressure (P atm
Hydrostatic level transmitters nivopress N GENERAL DESCRITION The NIVORESS N hydrostatic level transmitters are designed to measure the level of clean or contaminated liquids. The pressure sensor at the
Compact differential pressure switch Flameproof enclosure Ex d Models DE, DEC
Mechatronic pressure measurement Compact differential pressure switch Flameproof enclosure Ex d Models DE, DEC WIKA data sheet PV 35.41 Process Compact Series Applications Differential pressure monitoring
Oxymax H COS21D. Technical Information
Technical Information Digital sensor for measuring dissolved oxygen Sensor with long-term stability for frequent sterilization and autoclaving Application Process control in enzyme production Control of
Cable entries. Contents. Cable entries. Cable entries Introduction C.2 C.1. Standard cable glands - Plastic C.6. Standard cable glands - Brass C.
ontents able entries able entries able entries Introduction.2 Standard cable glands - Plastic.6 Standard cable glands - Brass.9 EM cable glands.15 Standard cable glands - Stainless steel.17 able glands
Miniature flowmeters DK 46, DKR 46 DK 47, DK 48, DK 800
KROHNE 1/22 7.236.22. GR Miniature flowmeters DK 46, DKR 46 DK 47, DK 48, DK 8 Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic flowmeters Mass flowmeters
NivuBar Plus II
NivuBar Plus II Ceramic diaphragm Capacitive measuring cell 2-wire technology (output 4-20 ma) Integrated overload protection Extensive, almost front flush diaphragm Ex approval for zone 0 as standard
1 Overview. Pressure Measurement Transmitters for basic requirements. 1/16 Siemens FI SITRANS P220 for gauge pressure
Siemens AG 204 Overview The pressure transmitter SITRANS P220 measures the gauge pressure of liquids, gases and vapors. Stainless steel measuring cell, fully welded Measuring ranges 2.5 to 600 bar (36.3
1 Overview. Pressure Measurement Single-range transmitters for general applications. 1/16 Siemens FI US Edition
Siemens AG 206 Overview Design Device structure without explosion protection The pressure transmitter consists of a piezoresistive measuring cell with a diaphragm installed in a stainless steel enclosure.
Pressure Switches Application Guideline
Pressure Switches Application Guideline Product Overview The Fema Pressure Switch product portfolio provides devices suitable for many applications. The portfolio contains Special functions and equipment
Monitoring device NTS 30
P R O D U C T I N F O R M A T I O N Electronic level- and temperature monitoring device Monitoring device NTS 30 Contents Description Description... 2 Operating... 3 Design and electrical data... 4 Circuit
Armatures for analytical probes
Armatures for analytical probes For many different types of installations and applications Large range of probe holders General purpose, water treatment, food & beverage, pharmaceutical applications Type
R133 HELYON. Brass high pressure regulator, suitable for compressed air, gas and liquid
R133 Brass high pressure regulator, suitable for compressed air, gas and liquid HELYON 5 Chemin du Jubin 6957 DARDILLY Tél. +33 () 7 5 16 7 - Fax +33 () 7 5 16 71 FEATURES High pressure regulator for cylinder
Pressure switch with bourdon tube
Pressure switch with bourdon tube for plants requiring special supervision,type series BN4 Features Pressure switch with bourdon tube for plants requiring special supervision, Nominal ranges -1...0 bar
OPTIBAR P 1010 C Technical Datasheet
Technical Datasheet Pressure transmitter with recessed diaphragm for general applications Wide variety thanks to modular design Measuring ranges up to 250 bar / 3750 psi High overload and temperature stability
Less power great performances
148 SMART SMART Less power great performances SMART is the answer to the increasing demand for both low energy consumption and high efficiency. Based on many years experience in road lighting, it offers
IECEx Certificate of Conformity Annexe
for Certificate No.: IECEx TSA 09.004X Issue No.: 1 Equipment description pertaining to Issue 0 of this Certificate: A range of electrical power distribution, control, protection and monitoring equipment
ARCA cabinet NEW. High performance polycarbonate cabinet. Protection in demanding environments
ARCA cabinet NEW High performance polycarbonate cabinet Protection in demanding environments NEW Fibox ARCA Fibox ARCA non corrosive electrical cabinets for use in extremely harsh and demanding environments
ED 701 Hygenic Pressure Transmitter
ED 701 Hygenic Pressure Transmitter Hygienic process connections Complete range of electrical connections 4... 20 ma and Voltage outputs Accuracy: 0.1%, 0.2% and 0.4% FS Quick response time < 25 ms (Option
DHR40 LED TECHNICAL MANUAL
DHR0 LED TECHNICAL MANUAL SIN CE 9 Den Haan Rotterdam TABLE OF CONTENTS Disclaimer Technical data Dimensions Available models Exploded view - base mounting Exploded view - side mounting Exploded view -
Cable Glands. Special Applications. RoHS Compliance. Plastic & Metal Cable Glands Adapters Reducers & Enlargers Grommets & Accessories
able Glands RoHS ompliance Plastic & Metal able Glands dapters Reducers & Enlargers Grommets & ccessories L File #: E363825 cable gland is a device that allows the user to pass a cable, wire or tube into
Reg No: 1999/027771/07 ACCREDITED AND APPROVED TEST LABORATORY IN TERMS OF ARP 0108: REGULATORY REQUIREMENTS FOR EXPLOSION PROTECTED APPARATUS
Government Approved Test Laboratory (Previously AIA) Reg No: 1999/027771/07 ACCREDITED AND APPROVED TEST LABORATORY IN TERMS OF ARP 0108: REGULATORY REQUIREMENTS FOR EXPLOSION PROTECTED APPARATUS ZEST
Series CGZT three-jaw grippers with T-guide
Series CGZT three-jaw grippers with T-guide New Single and double acting, magnetic, self-centering Sizes: 40, 50, 64, 80, 100, 125, 160 mm The new Series CGZT pneumatic grippers, thanks to the use of a
Ultrasonic. Continuous level measurement. Overview Page 64 VEGASON series 60 Page 66 AL-EN
Ultrasonic Continuous level measurement Overview Page 64 VEGASON series 60 Page 66 6 VEGASON Non-contact measurement with ultrasonics Measuring principle Short ultrasonic pulses in the range of 5 to 70
patented standards SAFETY QUICK COUPLINGS EXPERTISE AT THE SERVICE OF SAFETY AND PERFORMANCE a n d ot h e r p e n di n g
SAFETY QUICK COUPLINGS EXPERTISE AT THE SERVICE OF SAFETY AND PERFORMANCE PREVO S1 couplings represent the latest generation of pneumatic connection mechanisms. They provide a fully safe response to the
Ref GAS WAFER BUTTERFLY VALVE. Model/Ref:
Model/Ref: 1141 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 32/40 to 200 mm Between ISO PN10/16 and ANSI150 flanges - 20 C + 60 C Max Pressure : 5 Bars Specifications
Pressure switch Model PS01
Mechatronic pressure measurement Pressure switch Model PS01 Switzer data sheet PS-PS01 Applications Hydraulics and pneumatics Steel Power Special purpose machine Special features Diaphragm-sealed piston
IECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: IECEx CML 14.0034X Issue No:
Type N-10, N-11 Hazardous Area Non-incendive Transmitters
Electronic Pressure Catalog > Hazardous Area > N-10, N-11 Type N-10, N-11 Hazardous Area Non-incendive Transmitters Applications Natural gas compressors Wellhead monitoring Pipeline pressure General industrial
KDV HIGH ACCURACY GLASS TUBE ROTAMETER
KDV HIGH ACCURACY GLASS TUBE ROTAMETER Flow Pressure Level Temperature measurement monitoring control S2 Industrial and Sanitary Designs Body Sizes 1/2 Through 2 Reliable, Time Proven Glass Tube Design
ATM.ECO/IS - Analog Transmitter with Temperature compensation
Pressure Transmitter - FM / FM-C certified ATM.ECO/IS - Analog Transmitter with Temperature compensation CUSTOMER BENEFITS Certificate: FM, FM-C & IECEx & ATEX Entry level series into precision pressure
Bourdon tube pressure gauges with glycerine filling, for chemical applications EN 837-1
Application For aggressive gaseous and liquid media which are not highly viscous and do not crystallize. Suitable for use in corrosive atmospheres. For measurement in areas subject to high vibration levels
Mechanical Pressure Measurement
Mechanical Pressure Measurement Differential Pressure Gauges Model GDP, Universal Version, with Diaphragm Element High Overpressure Safety PN 40, 100, 250 or 400 Applications Differential pressure measurement
Technical information for hinges
451 452 Technical information for hinges In the tables on the following pages are listed a large range of hinge variations. Many more variations are possible if hinges with guide tabs are required i.e.
ABB MEASUREMENT & ANALYTICS DATA SHEET. WaterMaster FEW530 Electromagnetic water meter
ABB MEASUREMENT & ANALYTICS DATA SHEET WaterMaster FEW530 Electromagnetic water meter 2 WATE RMASTE R F E W 530 ELECT ROMAGNE TIC WATE R ME TE R DS/FE W530/FE T3 -E N RE V. A Measurement made easy Cost
4/2 way Pneumatic Solenoid Valve
4/2 way Pneumatic Solenoid Valve Compact design Push-over solenoid coil Exhaust air can be regulated Tube, threaded and sub-base connections Type combined with Seat valve version Type 2508 Type 2510/11
IDL01. Battery Powered Precision Digital Gauge for Leak Testing. Stainless Steel Sensor. class 0.05
IDL0 Battery Powered Precision Digital Gauge for Leak Testing Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger
Technical Specifications
V200P Pneumatic Positioner Input range: 3-5 PSI 20-00 kpa Supply pressure: 45 PSI < MPa Linearity error:
Operating Instructions
LPL Series LED Pendant Lighting Operating Instructions IM0102 COOPER Electronic Technologies (Shanghai) Co., Ltd. No. 955 Shengli Road, East Area of Zhangjiang High-Tech Park, Shanghai 201201 China 1.
ATM/Ex - Intrinsically Safe Analog Pressure Transmitter - ATEX / IECEx Certified
Intrinsically safe pressure transmitters ATM/Ex - Intrinsically Safe Analog Pressure Transmitter - ATEX / IECEx Certified CUSTOMER BENEFITS Certificate: ATEX & IECEx Fast customization thanks to configurable
High-performance submersible pressure transmitter For level measurement Model LH-20
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-20 WIKA data sheet PE 81.56 Applications Deep well and borehole measurements Groundwater
with self-sealing gas valve system
with self-sealing gas valve system R DUCTILE PVC POLSAFE GAS DISTRIBUTION SYSTEM INTRODUCTION POLSAFE is a programme of fittings for low pressure gas distribution systems. POLSAFE is designed for 25 up
ComEx Actuating elements
ComEx Actuating elements for Zone and 2 ComEx Actuating elements Features Easy installation Certified for Zone and 2 High IP degree of protection A large number of variants and versions of actuating elements
HAZARDOUS AREA DIFFERENTIAL CLOGGING INDICATOR DEH SERIES
HAZARDOUS AREA DIFFERENTIAL CLOGGING INDICATOR PASSION TO PERFORM Filter elements are efficient only if their dirt holding capacity is fully exploited. This is achieved by using filter housings equipped
ATM/Ex - Analog Pressure Transmitter
Pressure Transmitter - ATEX certified ATM/Ex - Analog Pressure Transmitter CUSTOMER BENEFITS Certificate: ATEX & EAC Fast customization thanks to configurable product design Demountable electrical connector
Heavy Duty Pocket Insets for the Oil & Gas Industry
ata sheet S/I N Rev. eavy uty Pocket Insets Spare connection heads, extensions and measuring insets for resistance thermometers and thermocouples Thermometers in this range have been designed for use with
Two-Wire In Situ Oxygen Analyzer (550 to 1400 C)
Product Data Sheet PDS 106-581.A01 March, 2004 Model 5081FG Two-Wire In Situ Oxygen Analyzer (550 to 1400 C) Intrinsically safe: - CENELEC EEx ia IIC - Class I Div. I Gr. B, C, D (pending) Operates at
IP 69 Protection against water under pressure
44 he European echnical Standard DIN EN 50 262 Metric cable glands for electric installations - the end of the PG Cable glands threads. he technical standards Cable Glands for cables and conductors with
ellison sensors international
PR3900 HAZARDOUS AREA PRESSURE TRANSMITTER ATEX CERTIFIED AND ALL EQUIVALENTS FOR HAZARDOUS AREAS: ZONE 0 GAS GROUP IIC, TEMPERATURE CLASS T4 AND ZONE 20 DUST PROTECTION BY INTRINSIC SAFETY TO EEXIA IIC
Expansion Thermometers Stainless Steel Series, Model 70
Mechanical Temperature Measurement Expansion Thermometers Stainless Steel Series, Model 70 WIKA Data Sheet TM 81.01 Applications General-purpose temperature measuring instruments for gaseous, liquid and
Assembly instruction. Operating temperature range -60 C +85 C Protection. IP 66, 67, 68 (5 bar)
Assembly instruction 1 2 3 4 5 6 7 1. Entry Component 2. Compound Sleeve 3. Interlocking Armour Cone 4. Armour Clamping Ring 5. Gland Body 6. Outer Sheath Sealing 7. Dome Nut 8. Compound 8 Operating temperature
Bourdon tube pressure gauge for diaphragm seals
Bourdon tube pressure gauge for diaphragm seals and switch function, Type series BR42.. Features Bourdon tube pressure gauge for diaphragm seal and switch function Nominal range -1 3 bar to -1 15 bar,
ABB MEASUREMENT & ANALYTICS DATA SHEET. AP100 ph/redox (ORP) cartridge sensors with water-wash option
ABB MEASUREMENT & ANALYTICS DATA SHEET AP100 ph/redox (ORP) cartridge sensors with water-wash option 2 AP100 P H / R EDOX ( ORP ) CART RI D GE SE NSORS WITH WATE R-WASH OPTION DS/AP100-E N RE V. K Measurement
Vortex flow sensor VA Di Ex-d with integrated, configurable transducer UVA in a flameproof enclosure for applications in explosive atmospheres
Vortex flow sensor VA Di Ex-d with integrated, configurable transducer UVA in a flameproof enclosure for applications in explosive atmospheres Drawing 1 VA Di ZG1 Ex-d Measured variables actual flow rate
LMP 307. Stainless Steel Probe. Stainless Steel Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % / 0.
LMP 07 Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % / 0. % FSO Nominal pressure from 0... mho up to 0... 50 mho Output signals -wire: 4... 0 ma -wire: 0...
High-performance submersible pressure transmitter For level measurement Model LH-20
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-20 WIKA data sheet PE 81.56 Applications Deep well and borehole measurements Groundwater
Siemens AG psi (6 bar) 145 psi (10 bar) 464 psi (32 bar) 1450 psi (100 bar) 3626 psi (250 bar) 8700 psi (600 bar) psi (800 bar)
Technical specifications SITRANS P, DS III series Input Measured variable Spans (infinitely adjustable) or nominal measuring range and max. permissible test pressure HART Gauge pressure Span (min.... max.)