Hose Connectors - Plastic Fittings. Hose connectors NORMAPLAST. Applications. Advantages at a glance. Materials. 166
|
|
|
- Oscar Goodman
- 6 years ago
- Views:
Transcription
1 SV NORMAPLAST YN Y plastic pipe connectors NORMAPLAST TS Equal T push-on connectors NORMAPLAST GES Straight taper thread connectors NORMAPLAST TES T-taper thread connector Equal bend EB NORMAPLAST GRS Reducing straight push-on connectors NORMAPLAST WN Elbow plastic pipe connectors NORMAPLAST GN Straight plastic pipe connectors NORMAPLAST KS Cross push-on connectors NORMAPLAST GS Straight push-on connectors Hose connectors SV products are proven plastic hose and pipe connection components that create secure, reliable and affordable connections in lines used for transporting media. SV hose and pipe connectors are used in the automotive construction industry as well as practically every other industrial sector. Advantages at a glance Extremely strong Durable Low weight Can be used for damping/absorption Resistant to abrasion Highly resistant to impact Applications Machine building White goods Chemical industry Irrigation systems Food and beverage industry Railway industry Agricultural machines Building machines Engine manufacturing Pump and filter s s Mechanical Properties Operation temperature Max. admissible pressure PP Moplen HP501H 0 C to +80 C short term (up to 1h) max C POM Polyacetal copolymer standard material hose connectors 40 C to 80 C, short-term (up tp 1h) 110 C PA6 Polyamide unreinforced standard material threaded connectors 40 C to 90 C, short-term (up tp 1h) 120 C PA with glass fiber Polyamide reinforced standard material pipe connectors 40 C to 120 C, short-term (up tp 1h) 150 C 10bar 10bar 10bar 10bar Applications Food area / drinking water area / chemical area Chemical area Chemical area (with aggressive media) Fuel / UREA (AdBlue) crank case ventilation Cooling water / Windshield washer fluid Air (Vaccum brake, Secondary air) TOC (Oil cooler, transmission oil) Recommended material range >POM< >PP< >PVDF< >PA12-GF30< >PA66-GF30< >PA6-GF30< Thermal properties In the case of threaded spigots, the expansion coefficient 100x10-6 for thermoplastic material must be taken into consideration if temperature fluctuations occur. Our standard materials are classified in accordance with the UL (Underwriters Laboratories) system as follows: Flammability rating (UL94) POM, PP, PA6, PA6.6, and PA12: HB (Horizontal Burning) 166
2 SV s Chemical properties of the plastics used No. Chemical substance Concentration Temperature POM PP PA 6 PA 6.6 PA 12 1 Acetone 100% 20 C/50 C 1/3 1/1 1/0 1/0 1/0 2 Formic acid % 20 C/50 C 4/4 1/3 4/4 4/4 4/4 3 Ammonium hydroxide (spirits of ammonia) Any 20 C/50 C 1/2 1/1 1/0 1/0 1/0 4 Benzine; normal and super unleaded Commercial 20 C/50 C 1/1 3/4 1/1 1/1 1/1 5 Benzene, benzene hydrocarbons 100% 20 C/50 C 3/3 3/4 1/0 1/0 1/0 6 Bleaching lye (12.5% active chlorine) Aqueous solution 12.5% 20 C/50 C 4/4 3/3 4/4 4/4 3/3 7 Brake fluid (DOT4) Commercial 20 C/50 C 1/1 1/1 1/1 1/1 1/1 8 Butanol Technically pure 20 C/50 C 1/2 1/1 1/0 1/0 1/0 9 Chlorine, chlorine water Commercial 20 C/50 C 4/4 4/4 4/4 4/4 4/4 10 Disinfectant phenols Diluted solution 20 C/50 C 4/4 1/1 4/4 4/4 4/4 11 Diesel fuel, diesel oil Commercial 20 C/50 C 1/1 1/3 1/1 1/1 1/1 12 Decalcifier Aqueous solution10% 20 C/50 C 4/4 1/1 2/3 2/3 2/3 13 Photographic developer (1:100) Commercial 20 C/50 C 1/1 1/1 4/4 4/4 4/4 14 Natural gas (town gas, coal gas) Commercial 20 C/50 C 1/1 1/1 1/1 1/1 1/1 15 Crude oil Commercial 20 C/50 C 1/1 3/3 1/1 1/1 1/1 16 Acetic acid (glacial acetic acid) 90% 20 C/50 C 4/4 1/2 4/4 4/4 4/4 17 Ethyl alcohol 96% ((tech. pure) 20 C/50 C 1/2 1/1 1/0 1/0 1/0 18 Photographic emulsion Commercial 20 C/50 C 1/0 1/1 1/0 1/0 1/0 19 Fruit juices Commercial 20 C/50 C 1/1 1/1 1/1 1/1 1/1 20 Glycerine Technically pure 20 C/50 C 1/1 1/1 1/1 1/1 1/1 21 Glysantin Commercial 20 C/50 C 1/1 1/1 3/3 3/3 3/3 22 Heating oil Commercial 20 C/50 C 1/1 1/3 1/1 1/1 1/1 23 Hydraulic fluid Commercial 20 C/50 C 1/0 1/3 1/1 1/1 1/1 24 Carbon dioxide, carbonic acid Technically pure, saturated 20 C/50 C 1/1 1/1 1/0 1/0 1/0 25 Coolants (based on glycol) Commercial 20 C/50 C 1/1 1/1 3/3 1/1 1/1 26 Methane Technically pure 20 C/50 C 1/1 1/1 1/1 1/1 1/1 27 Methanol Technically pure 20 C/50 C 1/1 1/1 1/1 1/1 3/3 28 Methyl ethyl ketone 100% 20 C/50 C 3/3 1/3 1/0 1/0 1/1 29 Engine oils (HD) Commercial 20 C/50 C 1/1 1/3 1/1 1/1 1/1 30 Sodium hydroxide (lye; caustic soda) 40% 20 C/50 C 1/1 1/1 1/1 1/1 1/1 31 Ozone Gaseous 20 C/50 C 4/4 3/4 3/4 3/4 3/4 32 Propanol Technically pure 20 C/50 C 1/1 1/1 1/1 1/1 2/2 33 Propane (liquefied gas) Liquid 20 C/50 C 1/1 1/1 1/0 1/0 1/0 34 Propene 96% 20 C/50 C 1/0 1/1 1/0 1/0 1/0 35 Rape oil (rape oil methyl ester) Commercial 20 C/50 C 1/1 2/2 (*) 1/1 1/1 1/1 36 Hydrochloric acid Aqueous, 10% 20 C/50 C 4/4 1/1 4/4 4/4 3/3 37 Lubricating oil/grease, soft soap Commercial 20 C/50 C 1/1 1/2 1/1 1/1 1/1 38 Sulphuric acid Aqueous, 10% 20 C/50 C 4/4 1/2 3/3 3/3 2/2 39 De-icing salt solution (brine) Saturated 20 C/50 C 1/2 1/1 1/1 1/1 1/1 40 Soap suds (dissolved detergent) Diluted solution 20 C/50 C 1/1 2/2 (*) 1/1 1/1 1/1 41 Water (drinking, river, sea) Technically pure 20 C/50 C 1/1 1/1 1/1 1/1 1/1 42 Citric acid 10% 20 C/50 C 2/4 1/1 1/0 1/0 1/0 Explanation of abbreviations: POM = Acetal copolymer PP = Polypropylene PA = Polyamide 0 = No data available/not possible to make an appropriate statement 1 = Highly stable/suitable (change in dimensions: none or negligible and reversible; no damage even after extended period) 2 = Very stable/suitable (change in dimensions after short period: none or negligible and reversible; little change in dimensions, possibly irreversible change to properties after extended period) 3 = Limited stability (considerable changes to dimensions, possibly irreversible change to properties after extended period) 4 = Unstable/unsuitable (soluble or serious effects after a short period) (*) Moisture expansion The specifications in this catalogue are based on tests carried out by the granular material manufacturer. They are intended to serve as guidelines for our customers, but cannot simply be applied to any case in which customers expose these products to demands which fall outside the scope of the tests performed. On no account should this be done without first consulting us. Please contact the relevant manufacturer before using a product as a safety component. Our customers must perform their own tests to determine whether our NORMAPLAST plastic hose connecting components are suitable for the application they are intended to be used in. We will be happy to offer any advice or information required. Our liability is subject exclusively to our terms of delivery and sale. Special versions can be produced if an appropriate quantity of the component in question is ordered. Use as a hose connector Use as a push-on connector 167
3 GES GES Straight taper thread connectors size D 3 SW PA6 3 GES 3 / M 5 3 M 5 cyl GES 4 / M 8 x 1 4 M 8 x 1 con GES 4 / M 8 x M 8 x 1.25 con GES 4 / M 10 x 1 4 M 10 x 1 con GES 4 / M 12 x M 12 x 1.5 con GES 4 / M 14 x M 14 x 1.5 con GES 4 / R 1/8 4 R 1/8 con GES 4 / R 1/4 4 R 1/4 con GES 4 / 1/8 NPT 4 1/8 NPT GES 4 / 1/4 NPT 4 1/4 NPT GES 5 / M 12 x M 12 x 1.5 con GES 5 / M 14 x M 14 x 1.5 con GES 5 / R 1/4 5 R 1/4 con GES 5 / R 1/4 NPT 5 R 1/4 NPT GES 6 / M 10 x 1 6 M 10 x 1 con GES 6 / M 12 x M 12 x 1.5 con GES 6 / M 14 x M 14 x 1.5 con GES 6 / R 1/8 6 R 1/8 con GES 6 / R 1/4 6 R 1/4 con GES 6 / R 3/8 6 R 3/8 con GES 6 / 1/8 NPT 6 1/8 NPT GES 6 / 1/4 NPT 6 1/4 NPT GES 8 / M 10 x 1 8 M 10 x 1 con GES 8 / M 12 x M 12 x 1.5 con GES 8 / M 14 x M 14 x 1.5 con GES 8 / M 18 x M 18 x 1.5 con GES 8 / M 22 x M 22 x 1.5 con GES 8 / M 26 x M 26 x 1.5 con GES 8 / R 1/8 8 R 1/8 con GES 8 / R 1/4 8 R 1/4 con GES 8 / R 3/8 8 R 3/8 con GES 8 / R 1/2 8 R 1/2 con GES 8 / 1/4 NPT 8 1/4 NPT GES 10 / M 12 x M 12 x 1.5 con GES 10 / M 14 x M 14 x 1.5 con GES 10 / M 16 x M 16 x 1.5 con GES 10 / R 1/4 10 R 1/4 con GES 10 / R 3/8 10 R 3/8 con GES 10 / 1/4 NPT 10 1/4 NPT GES 10 / 3/8 NPT 10 3/8 NPT GES 12 / M 16 x M 16 x 1.5 con GES 12 / M 18 x M 18 x 1.5 con GES 12 / M 22 x M 22 x 1.5 con GES 12 / M 26 x M 26 x 1.5 con GES 12 / R 3/8 12 R 3/8 con GES 12 / R 1/2 12 R 1/2 con GES 12 / 3/8 NPT 12 3/8 NPT GES 14 / M 20 x M 20 x 1.5 con GES 14 / R 3/8 14 R 3/8 con GES 14 / R 1/2 14 R 1/2 con GES 14 / R 1/2 NPT 14 R 1/2 NPT GES 16 / M 26 x M 26 x 1.5 con GES 16 / R 1/2 16 R 1/2 con GES 16 / R 3/4 16 R 3/4 con GES 19 / M 26 x M 26 x 1.5 con GES 19 / R 3/4 19 R 3/4 con GES 25 / R 1 25 R 1 con
4 BST / TES BST Blanking plugs with screw-in thread Designation SW PA6 BST M 8 x 1 M 8 x 1 con BST M 10 x 1 M 10 x 1 con BST M 12 x 1.5 M 12 x 1.5 con BST M 14 x 1.5 M 14 x 1.5 con BST M 18 x 1.5 M 18 x 1.5 con BST M 20 x 1.5 M 20 x 1.5 con BST M 26 x 1.5 M 26 x 1.5 con BST R 1/8 R 1/8 con BST R 1/4 R 1/4 con BST R 3/8 R 3/8 con BST R 1/2 R 1/2 con BST 1/8 NPT 1/8 NPT BST 1/4 NPT 1/4 NPT BST M 22 x 1.5 M 22 x 1.5 con TES T-taper thread connectors D 3 L 4 SW PA6 4 TES 4 / M 8 x 1 4 M 8 x 1 con TES 4 / M 10 x 1 4 M 10 x 1 con TES 4 / M 12 x M 12 x 1.5 con TES 4 / R 1/8 4 R 1/8 con TES 4 / R 1/4 4 R 1/4 con TES 4 / 1/8 NPT 4 1/8 NPT TES 4 / 1/4 NPT 4 1/4 NPT TES 6 / M 10 x 1 6 M 10 x 1 con TES 6 / M 12 x M 12 x 1.5 con TES 6 / R 1/8 6 R 1/8 con TES 6 / R 1/4 6 R 1/4 con TES 6 / 1/8 NPT 6 1/8 NPT TES 6 / 1/4 NPT 6 1/4 NPT TES 8 / M 12 x M 12 x 1.5 con TES 8 / M 14 x M 14 x 1.5 con TES 8 / R 1/4 8 R 1/4 con TES 8 / 1/4NPT 8 1/4NPT TES 10 / R 3/8 10 R 3/8 con
5 WES WES Elbow taper thread connectors size D 3 L 4 SW PA6 3 WES 3 / M 5 cyl. 3 M 5 cyl WES 4 / M 8 x 1 4 M 8 x 1 con WES 4 / M 10 x 1 4 M 10 x 1 con WES 4 / M 12 x M 12 x 1.5 con WES 4 / M 14 x M 14 x 1.5 con WES 4 / R 1/8 4 R 1/8 con WES 4 / R 1/4 4 R 1/4 con WES 4 / 1/8 NPT 4 1/8 NPT WES 4 / 1/4 NPT 4 1/4 NPT WES 6 / M 10 x 1 6 M 10 x 1 con WES 6 / M 12 x M 12 x 1.5 con WES 6 / R 1/8 6 R 1/8 con WES 6 / R 1/4 6 R 1/4 con WES 6 / R 3/8 6 R 3/8 con WES 6 / 1/8 NPT 6 1/8 NPT WES 6 / 1/4 NPT 6 1/4 NPT WES 8 / M 10 x 1 8 M 10 x 1 con WES 8 / M 12 x M 12 x 1.5 con WES 8 / M 14 x M 14 x 1.5 con WES 8 / M 16 x M 16 x 1.5 con WES 8 / M 18 x M 18 x 1.5 con WES 8 / M 22 x M 22 x 1.5 con WES 8 / R 1/8 8 R 1/8 con WES 8 / R 1/4 8 R 1/4 con WES 8 / R 3/8 8 R 3/8 con WES 8 / R 1/2 8 R 1/2 con WES 8 / 1/4 NPT 8 1/4 NPT WES 10 / M 14 x M 14 x 1.5 con WES 10 / R 1/4 10 R 1/ WES 10 / R 3/8 10 R 3/ WES 10 / 1/2 NPT 10 1/2 NPT WES 12 / M 16 x M 16 x 1.5 con WES 12 / M 18 x M 18 x 1.5 con WES 12 / M 22 x M 22 x 1.5 con WES 12 / M 26 x M 26 x 1.5 con WES 12 / R 3/8 12 R 3/ WES 12 / R 1/2 12 R 1/ WES 12 / 3/8 NPT 12 3/8 NPT WES 19 / M 24 x 2 19 M 24 x 2 con WES 19 / R 3/4 19 R 3/4 con WES 25 / R 1 25 R 1 con
6 GS / GRS / TS GS Straight push-on connectors (in mm) Designation D 1 - POM 3 GS GS GS GS GS GS GS GS GS GS GS GS Refer to pages 181 and 182. GRS Reducing straight push-on connectors D 3 POM 4-3 GRS GRS GRS GRS GRS GRS GRS GRS GRS TS Equal T push-on connectors L 3 POM 3 TS TS TS TS TS TS TS TS TS TS TS TS TS TS Refer to pages 181 and
7 KS / TRS / YRS KS Cross push-on connectors POM 4 KS KS KS KS TRS Reducing T push-on connectors D 3 D 4 L 4 POM TRS TRS TRS TRS TRS TRS TRS TRS TRS TRS TRS TRS TRS TRS TRS TRS YRS Reducing Y push-on connectors D 3 D 4 POM YRS YRS
8 WS / YS / GN WS Elbow push-on connectors L 3 POM 3 WS WS WS WS WS WS WS WS WS WS WS WS WS YS Equal Y push-on connectors POM 3 YS YS YS YS YS YS YS YS YS YS YS GN Straight plastic pipe connectors PA6 -GF30 PA12-GF20 PA12-GF30 6 GN GN GN GN GN GN GRN
9 TN / WN / YN TN T plastic pipe connectors ID L 3 PA6 -GF30 PA66-GF30 PA12-GF30 4 TN TN TN TN TN TN TN TN WN Elbow plastic pipe connectors ID L 3 PA6 -GF30 PA66-GF30 PA12-GF30 6 WN WN WN WN YN Y plastic pipe connectors ID PA66-GF30 PA12-GF20 PA12-GF30 8 YN YN YN YN
10 EG / EWS / ETS EG Straight compression connectors SW Diameter PA12-GF30 6 EG 6 x 1-R 1/8 6 x 1 R 1/8 con x 1-R 1/ EG 6 x 1-R 1/4 6 x 1 R 1/4 con x 1-R 1/ EG 6 x 1-M10 x 1 6 x1 M10 x 1 con x 1-M10 x EG 8 x 1-R 1/8 8 x 1 R 1/8 con x 1-R 1/ EG 8 x 1-R 1/4 8 x 1 R 1/4 con x 1-R 1/ EG 8 x 1-M10 x 1 8 x 1 M10 x 1 con x 1-M10 x EWS Swivel elbow compression connectors L 2 L 3 SW PA6-GF30 6 EWS 6 x 1-R 1/8 6 x 1 R 1/ EWS 6 x 1-R 1/4 6 x 1 R 1/ EWS 6 x 1-M10 x 1 6 x 1 M10 x EWS 8 x 1-R 1/8 8 x 1 R 1/ EWS 8 x 1-R 1/4 8 x 1 R 1/ EWS 8 x 1-M10 x 1 8 x 1 M10 x ETS Swivel T compression connectors L 2 L 3 SW PA6-GF30 6 ETS 6 x 1-R 1/8 6 x 1 R 1/ ETS 6 x 1-R 1/4 6 x 1 R 1/ ETS 6 x 1-M10 x 1 6 x 1 M10 x ETS 8 x 1-R 1/8 8 x 1 R 1/
11 ET / EW / WV ET T compression connectors L 2 PA6-GF30 6 ET 6 x 1-R 1/8 6 x 1 R 1/8 con ET 6 x 1-R 1/4 6 x 1 R 1/4 con ET 6 x 1-M10 x 1 6 x 1 M10 x 1 con ET 8 x 1-R 1/8 8 x 1 R 1/8 con ET 8 x 1-R 1/4 8 x 1 R 1/4 con ET 8 x 1-M10 x 1 8 x 1 M10 x 1 con EW/WV Elbow compression connectors L 2 PA6-GF30 6 EW 6 x 1 - R 1/8 6 x 1 R 1/8 con EW 6 x 1 - R 1/4 6 x 1 R 1/4 con EW 6 x 1 - M10 x 1 6 x 1 M10 x 1 con EW 8 x 1 - R 1/8 8 x 1 R 1/8 con EW 8 x 1 - R 1/4 8 x 1 R 1/4 con EW 8 x 1 - M10 x 1 8 x 1 M10 x 1 con WV 8 x 1 8 x 1 8 x
12 VT / VTR / VG / VGR VT/VTR Equal T and reducing T compression connectors L 2 PA6-GF30 N/A VT 6 x 1 6 x 1 6 x VT 8 x 1 8 x 1 8 x VTR 6 x 1-8 x 1-6 x 1 6 x 1 8 x VTR 8 x 1-6 x 1-8 x 1 8 x 1 6 x VG/VGR Straight/Reducing compression connectors SW PA6-GF30 N/A VG 6 x 1 6 x VG 8 x 1 8 x VGR 8 x 1-6 x 1 6 x
Strength. NORMAPLAST Plastic Products. The best way to connect hose and tube NORMAPLAST
The best way to connect hose and tube Over the years these top quality very versatile connectors have been used in millions of different applications and the product has become an indispensable aid to
Same as 90P except has Teflon seals extending the range of chemicals that can be pumped.
Chemical Hand Pumps Model 90P Rotary action Polypropylene pump, viton seals, lightweight, durable, corrosion-resistant, suitable for trouble free dispensing of lubricant products, water and water based
Automotive Stainless Steel Industrial Utility
Automotive Stainless Steel Industrial Utility Industrial Automotive Transportation & Automotive Fittings Eldon James Industrial & utility fittings Biofuels Compatible Fittings Kits: Kynar Fittings - resistant
TANK LINING RESISTANCE GUIDE I-19
INTRODUCTION The Wattyl Industrial Coatings Tank Lining Resistance Guide provides a list of chemicals and their suitability in contact with Epinamel TL710 EpinamelTL725SF Galvit ES600; and GUIDE TO DATA
SPILL KITS UNIVERSAL / CHEMICAL. Suitable for water, oils, fuels, solvents, acids and bases OIL-ONLY.
SPILL KITS - Contain and clean up spills quickly - Reduce clean up and disposal costs - Kits are stocked to handle spills up to 310 liters - Choose either Universal or Oil-Only for your facility UNIVERSAL
F.R.L. Units Precautions 1 Be sure to read this before handling.
Precautions 1 1. Confirm the specifications. Products represented in this catalog are designed only for use in compressed air systems (including vacuum). Do not operate at pressures or temperatures, etc.,
AIR RELEASE VALVES APPLICATIONS BENEFITS. Fast and Easy Installation. High Performance Materials. Complete Security
AI ELEASE VALVES Australian made, Philmac air release valve offers solutions to the agricultural and irrigation industry by providing an economic and reliable solution for removing air from a pipeline.
Water Well -- Distribution -- Municipal Service -- Deep Well Rink Pipe -- General Purpose -- Geothermal -- Corrugated
Water Well -- Distribution -- Municipal Service -- Deep Well Rink Pipe -- General Purpose -- Geothermal -- Corrugated Gravenhurst Plastics has been extruding polyethylene pipe for more than 40 years in
P/N: IND-DP Industrial Drum Pumps
P/N: IND-DP-0613 Industrial Drum Pumps Multi-Certified Industrial SAFETY Solutions SAFETY: As a leading pump manufacturer, Standard is known for our commitment to product quality and SAFETY serving the
Cable entries. Contents. Cable entries. Cable entries Introduction L.2 L.1. Standard cable glands - Plastic L.5. Standard cable glands - Brass L.
Contents Introduction.2 Standard cable glands - Plastic.5 Standard cable glands - Brass.7 EMC cable glands.14 Standard cable glands - Stainless steel.16 Cable glands for Ex applications - Brass.17 Adaptors.18
Solid Roller stud mount
Solid Roller stud mount 60624 Material, urethane or neoprene bonded to a steel insert. Hardness from 20-80 durometer (Shore A). Technical Notes Bearings included (held in place with snap rings). For more
Pressure Reducing Valve DMV 755
Pressure Reducing Valve DMV 755 Nominal size DN 10 50 Nominal size 3/8 2 Nominal pressure PN 10 bar Features pressure setting range 1 to 9 bar control valve for reliable reduction of system pressures to
TECHNICAL MANUAL. Trough Valves
TECHNICAL MANUAL Trough Valves CONTENTS Introduction 1 Applications 2 Benefits 2 Standards and Tests 3 installation Instructions 4 System Design Considerations 5 Chemical Resistance 5 Materials and Components
CO 2 radial piston compressor (transcritical)
CO 2 radial piston compressor (transcritical) At a glance Operating limits and performance data Technical data Dimensions and connections Scope of supply 124 126 129 130 131 Radial piston compressor (transcritical)
F.R.L. Units Precautions 1 Be sure to read this before handling products.
Precautions 1 1. Confirm the specifications. Products represented in this catalog are designed only for use in compressed air systems (including vacuum). Do not operate at pressures, temperatures, etc.,
Tagging - Teltag System
First Used Initials I - Inspection R - Repair 56 Tagging - System Two Part Label The two part set consists of firstly a rigid polycarbonate holder, back printed, so that the details of the equipment can
Mix and Flow of Matter 1 Section 1: Fluids are used in technological devices and everyday materials
Mix and Flow of Matter 1 Section 1: Fluids are used in technological devices and everyday materials 1.1 WHMIS Symbols and Safety Procedures Review your lab equipment and safety handouts (Ensure that you
Membrane Air Dryer. IDG1-C06 Series IDG1-C06-P Series
No.AMX-OM-R001 P r o d u c t N a m e Membrane Air Dryer Model / Series / Product Number IDG1-C06 Series IDG1-C06-P Series Contents Safety Instructions 2 Handling Precautions 4 Maintenance and Inspection
Type 4708 Supply Pressure Regulator
Type 478 Pressure Regulator Application pressure regulators used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to. bar ( to 4 psi). to bar (8 to 9 psi)
Inline Swivels Switch Your Swivel!
Inline Swivels Switch Your Swivel! HOW TO ORDER BODY OPTIONS 9 SS 8 FP 50 X FP 50 Z - V SS-SINGLE PLANE DP- DUAL PLANE SERIES ( ) THREAD SIZE MULTIPLES OF 100 FOR N.P.T.F. MULTIPLES OF 16 FOR J.I.C., O.R.B.
...vibration isolation. Materials Handling - Rollers
...vibration isolation Materials Handling - Technical Information from Anti-Vibration Components Solid have a smooth surface and a solid body Durasoft have a smooth contact surface with teardrop holes
Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION 2. HAZARDS IDENTIFICATION
Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION Product Identification Product Name: Aqryl-X 200 Product Use: Aqueous Acrylic Emulsion Based Coating Company Identification Edison Coatings, Inc.
Diaphragm pressure gauge guard MDM 902
Diaphragm pressure gauge guard MDM 90 Nominal size DN 0 5 Pressure PN 10 bar Features Pressure measurement up to 10 bar EPDM diaphragm with PTFE coating on the side in contact with the medium Reliable
Physical Pharmacy. Solubility. Khalid T Maaroof MSc. Pharmaceutical sciences School of pharmacy Pharmaceutics department
Physical Pharmacy Solubility Khalid T Maaroof MSc. Pharmaceutical sciences School of pharmacy Pharmaceutics department 1 Definition Solubility is the maximum amount of a solid, liquid or a gas solute that
L I Q UID C O N T R O L S. Mechanical Temperature Volume Compensators Models D5120, D5121, & D5122. Installation, Operation, and Parts M500-30:V3_0119
Mechanical Temperature Volume Compensators Models D5120, D5121, & D5122 Installation, Operation, and Parts L I Q UID C O N T R O L S An IDEX Energy & Fuels Business Mechanical Temperature Volume Compensators
Clean Regulator/Fluororesin Type
Clean egulator/fluororesin Type Series Washing/ssembly Procedure Washing parts: ody, Valve diaphragm and Diaphragm Parts Degreasing washing DI water washing lcohol washing ssembly Inspection Wetted part
Pressure Relief Valve DHV 718
Pressure Relief Valve DHV 718 Nominal size DN 8 50 Nominal size 3/8 2 Nominal pressure PN 10 bar Features pressure setting range 0.5 to 10 bar diaphragm controlled pressure relief valve simple design,
Pressure Reducing Valve DMV 750 set range: bar
Pressure Reducing Valve DMV 750 set range:.0-6.0 bar Advantage pressure setting possible at any time, also during operation hermetically sealed by valve diaphragm high level of operating safety and long
Hydraulic comparison test pump Models CPP1000-X, CPP1600-X
Calibration Hydraulic comparison test pump Models CPP1000-X, CPP1600-X WIKA data sheet CT 91.12 for further approvals see page 2 Applications Calibration service companies and service industry Maintenance
800.Keen.Gas
C 2 H 2 ACETYLENE Acetylene is a colorless and tasteless gas with a garlic-like odor. It is flammable and can be an asphyxiant. In order to prevent explosive decomposition, acetylene is supplied in cylinders
Pressure relief valve DHV 716 set range: 0,5-10,0 bar
Pressure relief valve DHV 7 set range: 0,5-0,0 bar Advantage pressure setting possible at any time, also during operation optimum monitoring valves high reproducibility of the set pressure high level of
Doc No: WELDHOT Midland Engineering Co., Inc. Initial Issue Date 12/14/15 Safety Management System
Revision Preparation: Safety Mgr Authority: President Issuing Dept: Safety Page: Page 1 of 7 PURPOSE To provide guidelines for the safe operation of welding, cutting and hot work of equipment, and to itemize
Fundamental Pool Water Chemistry Chapter 5 8 6/27/2011 Disinfection: (book definition on page 49)
CHAPTER 5: THE CHEMISTRY OF CHLORINATION WATER CHEMISTRY: DISINFECTION CHAPTER 6: TYPE OF CHLORINE CHAPTER 7: PROTECTING CHLORINE FROM SUNLIGHT CHAPTER 8: CHLORINE GENERATORS, BROMINE, AND OZONE 2011 1
ISO INTERNATIONAL STANDARD. Hydraulic fluid power Hose assemblies Part 1: Dimensions and requirements
INTERNATIONAL STANDARD ISO 17165-1 First edition 2007-10-15 Hydraulic fluid power Hose assemblies Part 1: Dimensions and requirements Transmissions hydrauliques Flexibles de raccordement Partie 1: Dimensions
Signal Word:Danger N/A
1. PRODUCT AND COMPANY IDENTIFICATION Product Identifier Recommended use Distributed by: ELBOW GREASE Cleaner DyChem International 560 North 500 West Salt Lake City, UT 84116 (800) 453-4606 Emergency Contact
Hydraulic Live Swivels
Switch Your Swivel! Hydraulic Live Swivels Inline & 90 Swivels 304 & 440c Stainless Steel Heavy Duty Ball Bearing, Rebuildable Design Super Swivels was established in 1986. We manufacture heavy-duty, leak
O NEof Premium tools for professionals!
O NEof 6.000 Premium tools for professionals! 1 System Overview 190 Testing of Water Lines & Containers Testing Pumps 191-193 Testing of Gas- & Water Lines Analogue Testing Device 194-195 Testing of Waste
Type 4708 Supply Pressure Regulator
Type 708 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point range 0.5 to bar (8 to 90 psi) The pressure regulator
Instructions for use. Storck Power Arms Pro Cranks. Model: MTB & Road
Instructions for use Storck Bicycle Storck Power Arms Pro Cranks Model: MTB & Road Thank you for choosing one of the lightest cranksets available on the market. This beautifully formed high tech crankset
Pressure relief valve DHV 712 DN 65-80: 0,5-10 bar, DN : 0,3-4 bar, DN 100: 0,5-6 bar
Pressure relief valve DHV 7 DN 5-80: 0,5-0 bar, DN 5-00: 0, - bar, DN 00: 0,5 - bar Advantage for high pressure stability reliable reduction of pressure peaks and pulsations pressure setting possible at
Acid and Chemical Hoses
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Acid and Chemical Hoses gacid and Chemical Hose General Purpose POLIAX
FS HANSEN HK SERIES
Q U I C K - C O N N E C T I N G S E L F - S E A L I N G C O U P L I N G S FS 28046 HANSEN HK SERIES QUICK-CONNECTING SELF-SEALING The connecting mechanism is of the balllocking type, in which a ring of
Cost effective. Smooth. Reliable. LOG Internal Hole Gripper
LOG Cost effective. Smooth. Reliable. LOG Internal Hole Gripper Light gripper made of very resistant polyamide with closed diaphragm system Field of Application Particularly suited to highly dynamic applications
REACH COMPLIANT 2500 WEIGEL STREET CADILLAC, MI
REACH 2500 WEIGEL STREET CADILLAC, MI 49601 Phone: 800-250-5132 Local: (231) 779-4390 Fax: (231) 779-4399 E-Mail: sales@piranhahose.com Web Site: www.piranhahose.com sales@piranhahose.com www.piranhahose.com
order-no: / 13 Kunden-Nummer Kunden-Name Aktualisierungsdatum checked (140/140) 1, 2-dichloroethane
Kunden-Nummer Kunden-Name Auftrags-Nr Auftrags Datum Aktualisierungsdatum Kostenstelle Status 9 KCL 33333.5. 7.. DACH - Schweiz checked (/),3, 3, 3, 3, 3, 3, Mutex T, -dichloroethane 7-- 7, -Propandiole
Plastic tubing, standard O.D.
Plastic tubing, standard O.D. Plastic tubing, standard O.D. Features Application The requirements with respect to pressure, temperature, flexibility and environmental influences differ from industry to
GI Series Diaphragm Pressure Gauge Guard
Diaphragm Pressure Gauge Guard INSTRUCTION MANUAL Please read this Instruction Manual Carefully and Thoroughly for the Correct and Optimum use of this Product. Kindly keep this manual in a convenient place
APQ Hose Technical Manual
APQ Hose Technical Manual Introduction to AQP Hose Eaton s AQP family of hose is scientifically superior to any hose on the market today. Materially different, AQP hose is constructed with elastomeric
FHKU John Guest 3/8 Part number: xx/x01
DATA SHEET FHKU John Guest 3/8 Part number: 938-75xx/x01 Digmesa AG, Keltenstrasse 31, CH 2563 Ipsach / Switzerland Phone +41 (32) 332 77 77, Fax +41 (32) 332 77 88 www.digmesa.com Version 02 FHKU JG 3/8
PRODUCT INFORMATION ÖLFLEX ROBUST 215 C
GmbH PRODUCT INFORMATION Proven all-weather control cables resistant to a wide range of chemical media Outstanding weather, ozone and UV resistance together with the wide temperature range enable versatile
Quick Action Couplings SV
Katalog SV E 2010_OE Prospekt SV 2007-E 8/17/12 2:55 PM Page 1 EITION2008 Quick ction Couplings SV Katalog SV E 2010_OE Prospekt SV 2007-E 8/17/12 2:55 PM Page 2 Connecting Technology Quick ction Couplings
pvc well casing & drop pipe
C e r t a i nte e d pvc well casing & drop pipe P V C We l l P r o d u c t s Sure Fit PVC well casing and drop pipe have gained broad acceptance since their introduction almost 40 years ago. Today, due
SAFETY DATA SHEET. CLASSIFICATION SIGNAL WORD: Hazard Statements. Precautionary Statements
SAFETY DATA SHEET. 1. PRODUCT AND COMPANY IDENTIFICATION Product Name: DRY GRAPHITE LUBE COMPANY NAME: MRO SOLUTIONS LLC ADDRESS : 5645 HOWARD ST NILES,IL 60714 Product Code:30314 EMERGENCY PHONE : (800)424-9300
Continental Industries TRANSITION FITTINGS or FAX Visit
Continental Industries TRANSITION FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
Type Pressure Regulator. for increased air capacity. Fig. 1: Type Pressure Regulator. Mounting and Operating Instructions EB EN
Type 4708-45 Pressure Regulator for increased air capacity Fig. 1: Type 4708-45 Pressure Regulator Mounting and Operating Instructions EB 8546-1 EN Edition March 2010 Definition of the signal words used
0349/MaN. Satron Pasve and Pasve ph
0349/MaN Satron Pasve and Pasve ph Pasve with Actuator Pasve ph manual Pasve ph with actuator Pasve ph Measuring Flushing Pasve ph, inline model measuring Std-glass PG13.5 Sensors and Adapters Sensor :
F Fittings with 24 cone as per DIN EN ISO Fitting accessories, plug-type connectors, hydraulic pipes, pipe clamps, pressure gauges
Fittings with 24 cone as per DIN EN ISO 8434-1 Fitting accessories, plug-type connectors, hydraulic pipes, pipe clamps, pressure gauges Issue 8-17 E F 9.300 Advantages NNWorldwide spread high-pressure
New 55 Holdings LLC. R3 Universal B&W Film Developer Material Safety Data Sheet
New 55 Holdings LLC R3 Universal B&W Film Developer Material Safety Data Sheet Data sheet No.030915 March 09 15 Author: Theophilus J. Mclelland lll Version 1.0 Section 1 Product and Company Information
Type 4708 Supply Pressure Regulator
Type 478 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to.6 bar ( to 4 psi) or. to 6 bar (8 to
STAINLESS STEEL DESIGN & INSTALLATION GUIDE
STAINLESS STEEL DESIGN & INSTALLATION GUIDE STAINLESS STEEL TUBE AND PRESS FIT SYSTEM FOR WATER, GAS AND INDUSTRY KEMBLA STAINLESS TUBE AND KEMPRESS STAINLESS FITTINGS, OFFERING ALL OF THE BENEFITS OF
ARROWHEAD FORENSICS SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION Catalog Number A-6052 Product Use Bullet Hole Tes ng Kit SDS Date March 30, 2016 Manufacturer Avishg Shpitzer Chemical & Forensic Services Ben Baba 3, Jerusalem
Pneumatic Service Unit
Pneumatic Service Unit Type 9 2406 0600 9 2406 0630 9 2406 0640 9 2406 0650 Illustration can differ from the original Installation and Operation Manual Compiled: 09.09.16 924060600_0630_0640_0650_en_Version_02
FIRE AND EXPLOSION HAZARD MANAGEMENT
FIRE AND EXPLOSION HAZARD MANAGEMENT Toolbox Talk Practical Applications (Part 2) Setting the standard in oil and gas safety 1 WHAT SHOULD I KNOW ABOUT FIRES AND EXPLOSIONS» One-size-fits-all solution
Name: SoluDent 30 Concentrate Developer Product Number: , Product Use: Photographic Developer
SAFETY DATA SHEET Section 1: Product and Company Identity Name: SoluDent 30 Concentrate Developer Product Number: 240-79,240-76 Product Use: Photographic Developer Distributed By: Henry Schein Telephone:
SAFETY DATA SHEET. Section 1: Product and Company Identity
SAFETY DATA SHEET Section 1: Product and Company Identity Name: Gendex Process Chemistry - Developer Product Number: 1.0069274 & 0.8223045 (296-49,296-40) Product Use: Photographic Developer Manufacturer:
Pressure Reducing Valve DMV 755 set range: 1,0-9,0 bar
Pressure Reducing Valve DMV 755 set range:,0-9,0 bar Advantage pressure setting possible at any time, also during operation high reproducibility of the set pressure high level of operating safety and long
Continental Industries STEEL SERVICE TEES or FAX Visit
Continental Industries STEEL SERVICE TEES 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
ChemiPPR. Response of hazardous materials LAMK. Sakari Halmemies 26 Sep2016
ChemiPPR Response of hazardous materials LAMK Sakari Halmemies 26 Sep2016 Course Objectives General (1/2) - to learn to know principles of tactics and methods when responding to a chemical accident - to
FRANCEJOINT SEALING SYSTEMS
AUTOMOTIVE I AEROSPACE I FOOD & BEVERAGE I FLUID TECHNOLOGIES I MOBILE MACHINERY FRANCEJOINT SEALING SYSTEMS FACE SEALS FLOATING SEALS FRANCEJOINT SEALING SYSTEMS EN-TETE CONTINU 3 Contents FACE SEALS
DataSheet. Series AA Electronic Metering Pumps. Configuration Data. Dimensions. Specifications. Model AA HI. ISO 9001 Certified
DataSheet Series AA Electronic Metering Pumps Configuration Data Model AA 9 4 1-358HI Control Code 1 --- Manual Control: Speed (stroking frequency) and stroke length manually adjustable. 7 --- Instrument
Polymer Electric. Product information. Normally Closed Safety Edges SL/NC II. GmbH & Co. KG. Polymer Electric
Polymer Electric Product information Normally Closed Safety Edges SL/NC II GmbH & Co. KG Polymer Electric Örlinger Straße 1 3 89073 Ulm GERMANY Tel. 49 731 2061-0 Fax 49 731 2061-222 E-Mail: info.ulm@mayser.de
(since 2015) (since 2018) (since 2018) (since 2018)
CRANKSET - 11s ULTRA-TORQUE (since 2015) (since 2018) (since 2018) (since 2018) This technical manual is intended for use by professional mechanics. Anyone who is not a qualified professional for bicycle
Hot Water Stationary Unit
S 312 E-VA Hot Water Stationary Unit Technical Data S 312 E-VA (18 kw) Flow rate max. 620 l/h Unloading pressure 190 bar Working pressure max. 30-170 bar Water temperature max. 45 C Water inlet 3/4 Power
16 Ideal for standard laboratory chromatography. 19 High temperature columns ideal for flow chemistry
Omnifit Labware 2 CONTENTS Solvent Safety Bottle Caps 4 Bottle Caps Selection Guide Q-Series Solvent Bottle Caps 6 1/4"-28 UNF threaded inlet lines with optional on-off valves T-Series Solvent Bottle Caps
Push-in fittings NPQH
Key features Application Effortless selection of the right fitting. Quick Star offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard
Noxious Fumes and Gases
Noxious Fumes and Gases The tissues of the body require oxygen 0 2 for normal metabolic processes (ie. the oxidation of food to produce energy). They must also eliminate CO, which is the waste product
Pressure Switches Series 1000
Pressure Switches Series 1000 This series of pressure switches can be used for all applications where an electrical circuit is required to close or open at a required pressure. The robustness of this series
104 Chamber System Ostendorf. Ostendorf. Chamber System ISO RV-Systém OSMA
104 Chamber System Ostendorf Ostendorf Chamber System ISO 9001 RV-Systém OSMA Ostendorf Chamber System 105 Ostendorf Chamber System The Ostendorf Chamber System is multifunctional enough to offer suitable
Pressure relief valve DHV 725 set range: 0,2-10,0 bar
Pressure relief valve DHV 75 set range: 0, - 0,0 bar Advantage pressure setting possible at any time, also during operation optimum monitoring valves high reproducibility of the set pressure high level
SECTION 1: Identification of the Product and the Company. 2.85mm ASA filament 3.00mm ASA filament
Safety Data Sheet SECTION 1: Identification of the Product and the Company 1.1. Product identifier Trade name: 1.75mm ASA filament 2.85mm ASA filament 3.00mm ASA filament 1.2. Relevant identified uses
Pressure Relief Valve DHV 718
Advantages frictionless components low maintenance low pressure increase up to fully opened valve constant low vibration controlling hermetically sealed by diaphragm for oscillating pumps for viscous media
Mix and Flow of Matter Grade 8 Unit 1 Test
Mix and Flow of Matter Grade 8 Unit 1 Test Student Class 1. All fluids flow and can be observed by many of the characteristics below. Which of these characteristics would you use to observe a gas flowing?
Instrument Operating Manual
Instrument Operating Manual INDEX NO. SUBJECT PAGE 1 INFORMATION 3 2 SAFETY 4 3 INTENDED USE 4 4 COMMISSIONING & OPERATION 5 5 MAINTENANCE 6 2 INFORMATION The pressure gauges described in the operating
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
PVC Quick Drain Valve
PVC Quick Drain Valve LVW Series Complies to JIS standard for polyvinyl chloride piping (JIS K 6742) Applicable fluids: Deionized water, Chemical liquids Application Example Cleaning Equipment Process
-Proline Polypropylene Single Wall Piping
EFFECTIVE: 6/01/11 Industrial Piping Systems Dimensional Guide #PDIM Proline Super Proline Single Chemical Wall Grade Piping PVDF System -Proline Single Wall Piping s 3 r z s www.asahi-america.com Dimensions
Science In Action 8 - Unit 1 Mix and Flow of Matter
1.0 Fluids are used in Technological devices and common everyday materials Key Concepts Workplace Hazardous Materials Information System (WHMIS) and safety fluid properties What does the acronym W.H.M.I.S.
Series SFD. Clean Air Filter. Variations. Made to Order. Type. Cartridge (replaceable element) Disposable (non-replaceable element) Up to 100
Clean Air Filter Variations SFD SFD SFD SFD Made to Order Type Disposable (non-replaceable element) Cartridge (replaceable element) Flow rate L/min (ANR) (at inlet pressure.7 MPa) Up to 6 Up to 8 Up to
Vetter Leak-Sealing Systems
Vetter Leak-Sealing Systems 18 Contents Introduction... 18 Safety instructions... 18 Vetter 1.5 bar/22 psi. leaksealing bags... 19 - Type LD 50/30 W, LS 20/12 S (with revolving eyelets)... 19 - Technical
WITH PUMPMASTER 3+3 PUMPS - 20 AND 50 Kg.
MOBILE GREASE UNITS WITH PUMPMASTER 3+3 PUMPS - AND Kg. 01 AIR OPERATED OIL PUMPS AND KITS Iquip modit iriuscidunt nos niam ver ip AIR OPERATED PISTON PUMPS FOR OIL AND LUBRICANTS............... 000...
Mounting and Operating Instructions EB EN. Type Supply Pressure Regulator. with increased air capacity
Type 4708-45 Supply Pressure Regulator with increased air capacity Translation of original instructions Mounting and Operating Instructions EB 8546-1 EN Edition March 2016 Note on these mounting and operating
COMPRESSED AIR DISTRIBUTION SYSTEMS
Series COMPRESSED AIR DISTRIBUTION SYSTEMS 18 DESIGNING AN EFFICIENT COMPRESSED AIR DISTRIBUTION The main source of inefficiencies and problems affecting compressed air distribution systems is often the
Compact Transfer Pump
Munster Simms Engineering, better known under the product brand name Whale, is an independent company engaged in the design, manufacture, marketing and selling of pumps, valves, faucets and plumbing (water
GHS SAFETY DATA SHEET (SDS)
GHS SAFETY DATA SHEET (SDS) SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION PRODUCT: Part #1786 Nylon Bagging Film, Above 300 F FIBRE GLAST DEVELOPMENTS CORP. 385 CARR DRIVE BROOKVILLE, OH 45309 TELEPHONE:
DVS Technical Codes an Bulletins
DVS Technical Codes an Bulletins DVS 1904-1 (2010-02) Adhesive bonding of plastics in domestic installation Requirements on plants and personnel... 1 DVS 1904-2 (2010-02) Adhesive bonding of plastics in
INSTRUCTION MANUAL. Thanks for purchasing our airbrush compressor and please read this
INSTRUCTION MANUAL AIRBRUSH COMPRESSOR AS-48A Thanks for purchasing our airbrush compressor and please read this Instruction Manual carefully and thoroughly before operating the tool to get best performance.
Push-in fittings NPQH
Key features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard
CONNECTION > Super-rapid fittings Series 6000 GENERAL DATA. Fitting with connecting tube. Sprint
Super-rapid fittings for plastic tubes Series 6000 Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3, M5, M6, M7), BSP (G1/8, G1/, G3/8, G1/2, G3/), BSPT (R1/8,
AIR/OVER HYDRAULIC JACK 20 TON
AIR/OVER HYDRAULIC JACK 0 TON 4487 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 999 by Harbor Freight Tools.