Special square punch with flattened corners

Size: px
Start display at page:

Download "Special square punch with flattened corners"

Transcription

1 Special square punch with flattened corners Mild steel (St37), plastic and aluminium to 2.0 Punching of burr-free openings 12.7 dia pilot drill Punch including punch, die, draw stud, counter nut and ball-bearing nut x dapter for hole-dia. (St37) Operating mode Punch Die Draw studs all bearing nut ounter nut Part No. Part No x Hand/hydr Round punch with four anti-rotation tabs Mild steel (St37), plastic and aluminium to dia. pilot drill Punch including punch, die, draw stud, counter nut and ball-bearing nut x x dapter for hole-dia. (St37) Operating mode Punch Die Draw studs all bearing nut ounter nut Part No. Part No x 3.2 x Hand/hydr x.8 x Hand/hydr

2 Punching Round and special shape punches D shaped punch Mild steel (St37), plastic and aluminium to dia. pilot drill Punch including punch, die, draw stud, counter nut and ball-bearing nut dditional information * and available only as punch x dapter for hole-dia. (St37) Operating mode Punch Die Draw studs all bearing nut ounter nut Part No. Part No x Hand/hydr x Hand/hydr x Hand/hydr Double D shaped punch Mild steel (St37), plastic and aluminium to dia. pilot drill Punch including punch, die, draw stud, counter nut and ball-bearing nut dditional information ll punches available only as punch x dapter for hole-dia. (St37) Operating mode Punch Die Draw studs all bearing nut ounter nut Part No. Part No x Hand/hydr x Hand/hydr x Hand/hydr x Hand/hydr x Hand/hydr

3 Keyway punch Mild steel (St37), plastic and aluminium to dia. pilot drill Punch including punch, die, draw stud, counter nut and ball-bearing nut x x dapter for hole-dia. (St37) Operating mode Punch Die Draw studs all bearing nut ounter nut Part No. Part No x 1. x Hand/hydr x 3.1x Hand/hydr x.0 x Hand/hydr x 2.6 x Hand/hydr Profile cylinder punch Mild steel (St37) up to 2.0 and aluminium up to 3.5 thick 12.7 dia. pilot drill Punch including punch, die, draw stud, counter nut and ball-bearing nut x x dapter for hole-dia x 33.3 x 10.5 (St37) Operating mode Punch Die Draw studs all bearing nut ounter nut Spacer bushing Part No. Part No. 2.0 Hand/hydr

4 Punching Round and special shape punches Sub-Min D punch Mild steel (St37) up to 2.0 and aluminium up to 3.5 thick Front or rear mounting 12.7 dia. pilot drill ,6 (1/16 ) R. 10 Punch including punch, die, draw stud, counter nut and ball-bearing nut Standard Number Pole Dimension dapter for hydr. punch Operating mode Draw studs all bearing nut ounter nut Part No. Part No Hand/hydr Hand/hydr RS Hand/hydr Hand/hydr Hand/hydr

5 Special shape punch for heavy duty connectors with centre mark points haracteristics Rectangular punches for heavy duty connectors feature a drilling jig built into the die, for drilling the locating holes. Mild steel (St37) to 3.0 thick and aluminium to 3.5 Hydraulic 30.2 dia. pilot drill Punch including punch, die, draw stud and counter nut x Individual parts for manual operation hole-dia. Item Operating mode Draw studs ounter nut Part No. connectors, 6-pin, 36 x 52 connectors, 10-pin, 36 x 65 connectors, 16-pin, 36 x 86 connectors, 2-pin, 36 x 91 connectors 36 x 112 connectors 6 x 86 connectors 6 x 112 Special shaped punch HN Yellock 30 with centre mark points 7.2 x 56. Special shaped punch HN Yellock 30 with centre mark points 7.2 x x Hydraulic x Hydraulic x Hydraulic x Hydraulic x Hydraulic x Hydraulic x Hydraulic x / 3.0 V Hydraulic x / 3.0 V Hydraulic

INSTRUCTIONS & MAINTENANCE SHEET PORTABLE HYDRAULIC PUNCHING HEAD PH045

INSTRUCTIONS & MAINTENANCE SHEET PORTABLE HYDRAULIC PUNCHING HEAD PH045 INSTRUCTIONS & MAINTENANCE SHEET PORTABLE HYDRAULIC PUNCHING HEAD PH045 V05.2013 DECLARATION OF CONFORMITY 2 1. TECHNICAL CHARACTERISTICS Maximum punching capacity: Min / Max. hole diameter: Max. yield

More information

Hydraulic Punch Drivers

Hydraulic Punch Drivers INSTRUCTION MANUAL 7804SB / 7806SB Quick Draw 7704SB / 7706SB Quick Draw Flex 7904SB / 7906SB Quick Draw 90 Quick Draw Hydraulic Punch Drivers Serial Codes AHJ, YZ, and ZA Read and understand all of the

More information

HYDRAULIC PUNCH DRIVER 38456, 38520, 7306 / 7306SB, 7310 / 7310SB, 7506, 7606SB, 7610SB, 7625 / 7625Pg / 7625PgSB, 7646 / 7646Pg / 7646PgSB

HYDRAULIC PUNCH DRIVER 38456, 38520, 7306 / 7306SB, 7310 / 7310SB, 7506, 7606SB, 7610SB, 7625 / 7625Pg / 7625PgSB, 7646 / 7646Pg / 7646PgSB INSTRUCTION MANUAL HYDRAULIC PUNCH DRIVER 38456, 38520, 7306 / 7306SB, 7310 / 7310SB, 7506, 7606SB, 7610SB, 7625 / 7625Pg / 7625PgSB, 7646 / 7646Pg / 7646PgSB Read and understand all of the instructions

More information

dumont Minute Man Broaches

dumont Minute Man Broaches Catalog K dumont Minute Man Broaches Standard and Special Broaches Keyway Broaches and Sets Internal Hole and Surface Broaches The dumont Company, Greenfield, Massachusetts www.dumont.com The dumont Company

More information

Parts Manual. Scraper Hitches PH:

Parts Manual. Scraper Hitches PH: Parts Manual Scraper Hitches 12-18 1 Table of Contents A123299 Swivel Hitch 3 A1063527 Super Swivel Hitch 4 A125056 Yoke Hitch 5 A125057 Super Capacity Hitch 6 A125223 MDU Hitch 7 A123224 360 Swivel Hitch

More information

Ersatzteilliste Spare parts list

Ersatzteilliste Spare parts list VIBRO FLEX 00 Ersatzteilliste Spare parts list Liste di pièce de rechange Tab. Spare parts list / VIBRO FLEX 00. Date: 00,0 Fig. Serial no. Part no. Pieces Notes 00 Central frame 0 Frame cpl. VF 000 Frame

More information

Order No Projection Backboard

Order No Projection Backboard Basketball Basketball Single Post System The single-post basketball stand is made with oval aluminium profiles with a cross-section of 120 x 100 mm. The wall thickness of this robust apparatus is 4 to

More information

Opening Angle 76º 30º [337] 45º 76º 30º [213] 45º 76º 30º [169] 45º 76º 30º [337] 45º 76º 30º [337] 45º 76º 30º [128] 45º 76º 30º [404] 45º 76º 30º

Opening Angle 76º 30º [337] 45º 76º 30º [213] 45º 76º 30º [169] 45º 76º 30º [337] 45º 76º 30º [337] 45º 76º 30º [128] 45º 76º 30º [404] 45º 76º 30º 17.22 Picture Force N [lbs] Opening Angle Weight Opening/closure time min 84A3-310000000 84A3X310000000 84A3Y310000000 84A3Z310000000 60º 1,35 84A3-0000000 84A3X0000000 950 84A3Y0000000 [213] 84A3Z0000000

More information

unittool punch & die company TOOLING for Fabricating & Duplicating Type Machines H&O DIE SUPPLY, INC

unittool punch & die company TOOLING for Fabricating & Duplicating Type Machines H&O DIE SUPPLY, INC CATALOG F&D-91 TOOLING for Fabricating & Duplicating Type Machines INTRODUCING New! 1/2" & 5/8" Drop In Tooling unittool punch & die company TOOLING FOR FABRICATING & DUPLICATING TYPE MACHINES Manufactured

More information

Hand lever valves VHER

Hand lever valves VHER Hand lever valves VHER Hand lever valves VHER Key features Powerful Flexible Practical -M- Flow 170 3800 l/min 4/3-way valve mid-position closed mid-position exhausted mid-position pressurised Connections:

More information

10.2. Basketball Single Post System

10.2. Basketball Single Post System Basketball Basketball Single Post System The single-post basketball stand is made with oval aluminium profiles with a cross-section of 120 x 100 mm. The wall thickness of this robust apparatus is 4 to

More information

Index Table. Model 794. Installation, Operating and Maintenance Instructions

Index Table. Model 794. Installation, Operating and Maintenance Instructions CLOCKWISE MANUAL MAKING INTO CCW TABLE Index Table Model 794 Installation, Operating and Maintenance Instructions Black & Webster Products Division 545 Hupp Ave. P.O. Box 831, Jackson, Michigan 49204 2009

More information

INSTRUCTIONS 360 Y-DROP HAGIE STS 2015

INSTRUCTIONS 360 Y-DROP HAGIE STS 2015 INSTRUCTIONS 60 Y-DROP HAGIE STS 05 INSTRUCTIONS 60 Y-DROP HAGIE STS 05 INTRODUCTION Before beginning, it s important to know where each mounting bracket fits relative to the row spacing involved. The

More information

REPAIR PART NUMBER NUMBER DESCRIPTION 0137 ELE 0136 ELE 12 VOLT SOLENOID

REPAIR PART NUMBER NUMBER DESCRIPTION 0137 ELE 0136 ELE 12 VOLT SOLENOID PART REPAIR PART NUMBER NUMBER DESCRIPTION 0137 ELE 0136 ELE 12 VOLT SOLENOID 0203 WHL 0250 WHL WHEEL HUB 0251 WHL AXLE 0252 WHL DUST CAPS 0253 WHL TIRE - 210 SP 0204 WHL 0211 WHL TIRE & WHEEL - SP 0250

More information

DEADBOLT SETS, MECHANICAL FEATURES

DEADBOLT SETS, MECHANICAL FEATURES , MECHANICAL FEATURES 8000 SERIES LOW PROFILE CYLINDER DEADBOLT FOR 1 5 8 (41mm) DOOR PREP All deadbolts feature a ½ low-profile cylinder projection. CASE: Deadbolt case is formed of heavy gauge steel

More information

Dimensions & Specifications

Dimensions & Specifications Dimensions & Specifications These pages illustrate our commonly used punches, dies and related tooling for Mubea Ironworkers. Refer to our Cross Reference Catalog for the proper tooling to fit your machine.

More information

Splitting cylinder C20

Splitting cylinder C20 Splitting cylinder C20 Product abbreviation C20 HN C20 = Size of splitting cylinder N or L = Wedge set length H / V / J / C = Mounting version Purpose of application Horizontal splitting (+/- 45 to the

More information

SCOUT DECK ANCHOR 3 1/4" BONDING SCREW

SCOUT DECK ANCHOR 3 1/4 BONDING SCREW SCOUT DECK ANCHOR 16" 16" 1" X 4" ANCHOR BOLT (4) 10" 3 1/8" 5" 6" MIN COPPER WIRE TO ATTACH TO BONDING GRID 3 1/4" BONDING SCREW CONCRETE DECK SPECIFICATIONS: THE AQUA CREEK PRODUCTS' SCOUT DECK ANCHOR

More information

Technical information for hinges

Technical information for hinges 451 452 Technical information for hinges In the tables on the following pages are listed a large range of hinge variations. Many more variations are possible if hinges with guide tabs are required i.e.

More information

Instruction Manual LIMITED 1 YEAR WARRANTY. Hydraulic Punch Driver Read this material before using this product.

Instruction Manual LIMITED 1 YEAR WARRANTY. Hydraulic Punch Driver Read this material before using this product. Instruction Manual Hydraulic Punch Driver 902-483 LIMITED 1 YEAR WARRANTY We make every effort to assure that its products meet high quality and durability standards, and warrant to the original purchaser

More information

HermanMiller Aeron. New Aeron Disassembly for Recycling. Materials Identification and Segregation: Tools Required. Step 1

HermanMiller Aeron. New Aeron Disassembly for Recycling. Materials Identification and Segregation: Tools Required. Step 1 HermanMiller Aeron For more information about our products and services or to see a list of dealers, please visit us at www.hermanmiller.com or call 888-443 - 4357. 2016 Herman Miller, Inc., Zeeland, Michigan

More information

Precision Escalator Products, Inc. O & K ESCALATORS TABLE OF CONTENTS

Precision Escalator Products, Inc. O & K ESCALATORS TABLE OF CONTENTS Precision Escalator Products, Inc. 147 North Michigan Avenue Kenilworth, New Jersey 07033 1-800-233-0838 IN NJ (908) 259-9009 FAX (908) 259-9013 O & K ESCALATORS TABLE OF CONTENTS COMB PLATES PAGE 2 ROLLERS

More information

SEAGULL IV X-1F Drinking Water Purification System

SEAGULL IV X-1F Drinking Water Purification System supersedes 200712Ax-1f-i&o SEAGULL IV X-1F Drinking Water Purification System INSTALLATION AND PRODUCT USE GUIDE Installation Instructions NOTE: Read instructions completely before starting. General Ecology

More information

MUELLER. Mega-Lite Drilling Machine. Reliable Connections. table of contents PAGE. Equipment 2. Operating Instructions 3-4. Parts Information 5

MUELLER. Mega-Lite Drilling Machine. Reliable Connections. table of contents PAGE. Equipment 2. Operating Instructions 3-4. Parts Information 5 operating Instructions manual MUELLER Mega-Lite Drilling Machine table of contents PAGE Equipment 2 Operating Instructions 3-4 Parts Information 5 Travel Charts 6-11! WARNING: 1. Read and follow instructions

More information

K13.12 FACE FIXED PANIC EXIT DEVICE K13 DOORS

K13.12 FACE FIXED PANIC EXIT DEVICE K13 DOORS K13 DOORS K13.12 FACE FIXED PANIC EXIT DEVICE 01.03.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Base set n

More information

2.4M Viking Swing Basket Swing

2.4M Viking Swing Basket Swing .M Viking Swing Basket Swing PROD. CODE SIZE AGE RANGE F/ FALL HEIGHT HEAVIEST PART TOTAL WEIGHT 75x75x150 5 to Adult 1.5 Metres Approx 6Kg Approx 198Kg SPECIFICATION Solid steel components to EN 10087:1998

More information

Replaces Lesco 300 & 500 Parts Cutting Unit

Replaces Lesco 300 & 500 Parts Cutting Unit Replaces Lesco 300 & 500 Parts 3A 11 10 10 11 17 3 1 15 2 13 1 20 1 20 1 21 2 2 22 1B 30 1A 10 14 31 25 23 24 10 4 27 23 25 26 14 24 10 13A 5 5A 4A 16 0 R&R Reels Available, Lifetime Guaranteed 1 R50271

More information

ROLLER SLIDE BALL BEARING

ROLLER SLIDE BALL BEARING ROLLER SLIDE BALL BEARING ROLLER SLIDE SYSTEM BALL BEARING SLIDE SYSTEM Standard slides and ball bearing slides offering a variety of top quality movement systems. www.grassusa.com Roller slides: Tried-and-tested

More information

02 Push-to-Close Latch

02 Push-to-Close Latch 142 02 Push-to-lose Latch ousing: Polypropylene, black or white Pole pieces and mounting : Steel, zinc plated Magnet:, large: Barium ferrite : Strontium ferrite 7.7 (.30) 13.3 (.52) 6.1 (.24) 23.6 (.93)

More information

Replaces Lesco 300 & 500 Parts

Replaces Lesco 300 & 500 Parts Replaces Lesco 300 & 500 Parts ItemNo R&R PartNo PartNo Description Req. Qty Price R&R Reels Available, Lifetime Guaranteed 1 R502871 020800 R&R Reel, 9 Blade, Fits 300 1 32,100 1 R502871H R&R Only R&R

More information

EZ-Mount 4 Spring Enclosed System to 22 (Low & High Mount Applications) Installation Instructions

EZ-Mount 4 Spring Enclosed System to 22 (Low & High Mount Applications) Installation Instructions 501-1768 (With Wire) 501-1769 (No Wire) 501-1766 (With Wire) 501-1767 (No Wire) 607-015 WLH 06/20/18 TABLE OF CONTENTS ***Assembly*** ***Parts*** Pivot Points and Mounting Locations (Low Mount)... 1 High

More information

Lock-N-Load. Bullet Feeder

Lock-N-Load. Bullet Feeder Lock-N-Load Bullet Feeder table of contents steps Overview... 2 List of required hand tools... 2 1: Mounting the Bullet Feeder to the Bench... 3 2: Mounting the Bullet Feed Hopper... 4 3: Bullet Feed Hopper

More information

Telescopic winch handle Speedfriend"

Telescopic winch handle Speedfriend Winch handles, jib furlers JIB FURLERS - WINCH HANDLES - SPREADER COVERS 57 Floating winch handles Floating universal size winch handles Fitted with "Lock In" winch system; universal size for any winch;

More information

HOMOLOGERINGSBLAD KARTING TM Racing 60cc - Junior 60 Utgåva 2 Sida 1/21 Publiceringsdatum / Giltig t.o.m /

HOMOLOGERINGSBLAD KARTING TM Racing 60cc - Junior 60 Utgåva 2 Sida 1/21 Publiceringsdatum / Giltig t.o.m / Sida 1/21 PHOTO OF DRIVE SIDE OF THE ENGINE PHOTO OF OPPOSITE SIDE OF THE ENGINE TECHNICAL INFORMATION A CHARACTERISTICS Tolleranze Volume of cylinder 60cc Max. Bore 42,1mm Stroke 43mm ± 0,10 mm. Induction

More information

Livestock Equipment Bale Movers/ Bale Spears. Tractor Linkage. Grade 5 & 8 Hitch Pins. Tractor Linkage

Livestock Equipment Bale Movers/ Bale Spears. Tractor Linkage. Grade 5 & 8 Hitch Pins. Tractor Linkage Hooking a piece of equipment to your tractor? Our selection of hitch pins, locking pins, lift arm/top link parts, PTO adapters will keep things connected. Make sure you have an SMV sign to keep everyone

More information

The M-UPPT is an universal punch tool. Different punch inserts can be easily switched out. Pin to fix and remove inserts

The M-UPPT is an universal punch tool. Different punch inserts can be easily switched out. Pin to fix and remove inserts The is an universal punch tool. Different punch inserts can be easily switched out. Pin to fix and remove inserts To install a punch insert, slide in the punch insert and fix this insert with the pin on

More information

OWNER'S MANUAL LOCK-N-LOAD BULLET FEEDER (PISTOL)

OWNER'S MANUAL LOCK-N-LOAD BULLET FEEDER (PISTOL) OWNER'S MANUAL LOCK-N-LOAD BULLET FEEDER (PISTOL) Table of Contents ASSEMBLY ASSEMBLY Pistol Bullet Feeder... Page 3 CHANGE-OVERS The Hornady Lock-N-Load Pistol Bullet Feeder is capable of feeding most

More information

310 SERIES TILT-TO-LOAD ROTATOR. The Specialist In Drum Handling Equipment

310 SERIES TILT-TO-LOAD ROTATOR. The Specialist In Drum Handling Equipment OPERATOR S MANUAL FOR MORSE TILT-TO-LOAD DRUM ROTATOR SAFETY INFORMATION: While Morse Manufacturing Co. drum handling equipment is engineered for safety and efficiency, a high degree of responsibility

More information

DEADBOLTS - SOLID BRASS

DEADBOLTS - SOLID BRASS DEADBOLTS - SOLID BRASS Regular Style Deadbolt 13 8" 23 8" Dia. 21 2" Dia. Exterior Trim (8450) Projection is ₁₃ 16" 8350 same on both sides Available Extension Collar for Thin Doors Interior Trim (8450)

More information

Hydraulic Punch Drivers

Hydraulic Punch Drivers SERVICE MANUAL 7804SB / 7806SB Quick Draw 7704SB / 7706SB Quick Draw Flex Quick Draw Hydraulic Punch Drivers Serial Codes AHJ and YZ Read and understand all of the instructions and safety information in

More information

Straightaway 130. Sliding & Folding Door Systems. Product Overview. Features. Technical Specifications. Coburn Product Data Sheet

Straightaway 130. Sliding & Folding Door Systems. Product Overview. Features. Technical Specifications. Coburn Product Data Sheet Sliding & Folding Door Systems Coburn Product Data Sheet Straightaway 0 Sliding & Folding Door Systems Product Overview The Straightaway 0 is a quiet and dependable system designed for interior and exterior

More information

709 and 710 Stud Punches

709 and 710 Stud Punches INSTRUCTION MANUAL 709 and 710 Stud Punches Read and understand all of the instructions and safety information in this manual before operating of servicing this tool. IMPORTANT SAFETY INFORMATION 709 and

More information

Ajay Industrial Corporation Limited. Since 1961 AFRIDEV DEEP WELL HAND PUMP. A basic need of the community

Ajay Industrial Corporation Limited. Since 1961 AFRIDEV DEEP WELL HAND PUMP. A basic need of the community Since 1961 Ajay Industrial Corporation Limited AFRIDEV DEEP WELL HAND PUMP A basic need of the community DEEP WELL HAND PUMP AFRIDEV I N T R O D U C T I O N Ajay is an industrial organisation of 50 years

More information

SIX CYLINDER RADIAL STEAM ENGINE WITH SLIDE VALVES GENERAL ARRANGEMENT IF NOT STATED ALL CHAMFERS ARE 0.2mmx45

SIX CYLINDER RADIAL STEAM ENGINE WITH SLIDE VALVES GENERAL ARRANGEMENT IF NOT STATED ALL CHAMFERS ARE 0.2mmx45 /// IF IN DOUBT SK REMOVE LL BURRS ND SHRP EDGES 0 QTY. PRT NUMBER 0-BSE 0-BSE PLTE 0-SPCER PLTE -SIDE PLTE -SIDE PLTE -CRNK SHFT BERING 0-FLYWHEEL INNER 0-FLYWHEEL HUB -FLYWHEEL HUB PINS -CRNK SHFT -CRNK

More information

SECTION 2 RING MOUNT

SECTION 2 RING MOUNT SECTION 2 RING MOUNT Rotax aircraft engines are manufactured and supported by Rotax GmbH of Austria. Read and understand the Rotax manuals completely before starting with the engine installation, as they

More information

Mini-Mac Applicator Specification Sheet Part No (Replaces )

Mini-Mac Applicator Specification Sheet Part No (Replaces ) Mini-Mac Applicator Specification Sheet Part No. 63801-2900 (Replaces 19814-1000) FEATURES ΠQuick set-up time; plus the crimp height, track and feed adjustments can be preset in applicator ΠConductor

More information

A photo gallery of jump construction can be found at;-

A photo gallery of jump construction can be found at;- The Heirisson Island Tournament Water Ski Club jump is situated on the Swan River, in the heart of Perth. The jump was wholly constructed by volunteer members of the Heirisson Island Tournament Water Ski

More information

ISO Sub-bases. Port sizes G 1 /4 - G1 and 1 /4NPT - 1 /2NPT. Sub-bases tovdma specification, for ISO sizes #1, #2, #3 and #4

ISO Sub-bases. Port sizes G 1 /4 - G1 and 1 /4NPT - 1 /2NPT. Sub-bases tovdma specification, for ISO sizes #1, #2, #3 and #4 Port sizes 1 / - 1 and 1 /NPT - 1 /NPT Sub-bases tovd 3 specification, for ISO sizes #1, #, #3 and # Universal bases for ISO sizes #1 and #, side and bottom ported Technical Data edium: See individual

More information

7 FORAGE AND HARVESTING

7 FORAGE AND HARVESTING Sickle Assemblies 4560R2 Sickle section, 3" x 3-1/4" underserrated. X-Hvy gauge, Chrome finish. Uses rivet RIV101. 142669H L. FT, SECTION NUMBER 141198, TYPE UND 14260 STEEL HEAT THREADED HEADS. Section

More information

UNITY 2. Uni-DAAMS Manual. Version 1.3 (Changes to Section 1.1) March 2010

UNITY 2. Uni-DAAMS Manual. Version 1.3 (Changes to Section 1.1) March 2010 UNITY 2 Uni-DAAMS Manual Version 1.3 (Changes to Section 1.1) March 2010 1. Introduction...2 1.1. Installing the DAAMS tube ovens...2 1.2. Swapping between tube types...5 1.3. Changing tube oven o-rings...6

More information

ATHLETICS Track & Field Equipment

ATHLETICS Track & Field Equipment ATHLETICS Track & Field Equipment Aluminium Curbing Order No. 11260 The aluminium curbing is made from special made anodized aluminium profiles. It is a mobile marker and separator of the running track.

More information

UBEC 1AT. AUTO TANK Fill System Installation, Operation, & Setup Instructions

UBEC 1AT. AUTO TANK Fill System Installation, Operation, & Setup Instructions Document Number: XE-ATA5PM-R1A UBEC 1AT AUTO TANK Fill System 08899155 Installation, Operation, & Setup Instructions Rev170906-EB-FRC PHYSICAL: 1302 WEST BEARDSLEY AVE ELKHART, IN 46514 WWW.ELKHARTBRASS.COM

More information

PoolLock Easy Pool Cover

PoolLock Easy Pool Cover PoolLock Easy Pool Cover INSTALLATION MANUAL The packaging of the PoolLock Easy Cover contains: 1. PoolLock Easy cover (rolled up) 2. One or two manual cranks (according to the pool size) Plastic bag contains:

More information

Dyne-A-Cam Series NITRO-CAM MANUAL

Dyne-A-Cam Series NITRO-CAM MANUAL NIRO-CM MNUL BSIC PRINCIPLES, DYNMIC SOLUIONS SM NCM0100100 NIRO-CM MNUL able of Contents Page General Description... 2 Features and Benefits... 3 How the System Works... 4 Component Selection... 5-11

More information

Paddle Bar Replacement

Paddle Bar Replacement This procedure is to help facilitate the replacement of the 23 Paddle Bar Assembly on the ANKOM Dietary Fiber Analyzer. Note: The following items will be sent in a replacement package as part of the 23

More information

B Upper Guide & Carbide Block. B Filler Block (Nylon) B004131S. Blade Cleaner. (Steel)

B Upper Guide & Carbide Block. B Filler Block (Nylon) B004131S. Blade Cleaner. (Steel) REPLACEMENT PARTS FOR BIRO MAINTENANCE/REPAIR KIT Models 11, 22, 33, 1433, 1433FH, 3334, 3334FH BRK2...Biro Repair Kit 1............ Upper Guide & Carbide Block 1.......... 3............... s 2.......

More information

Installation Guide Wall Mounted Angled Flagpole

Installation Guide Wall Mounted Angled Flagpole Installation Guide 1.5m - 4m Angled Flagpole Dimensions Flagpole Dimensions Wall Bracket Dimensions 2m Aluminium 76mm Glassfibre 114.3mm angle from vertical 2000mm 250mm 300mm 1715mm Backplate thickness

More information

Cat #: 7310SB UPC #: Spec:

Cat #: 7310SB UPC #: Spec: Name: Driver, hand pump, Slug-Buster punches, dies and draw studs for 1/2in. through 2in. and 2-1/2in. through 4in. standard conduit size punches, dies and draw studs, adapter, spacers, Kwik Stepper Step

More information

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. Drywall Stills DS1830 Max Weight Capacity 225 Lb READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance. Every effort

More information

C-M Precast Traffic Islands Index

C-M Precast Traffic Islands Index C-M Precast Traffic Islands Index Selecting Left or Right Hand Islands Product Range Splitter Islands Single Splitter Islands 1072 Chicane Splitter Islands 1075 Pedestrian Refuge 1082 Tweed Pedestrian

More information

Medium Voltage Switchgear. Installation Manual for Pressure Relief Ducts

Medium Voltage Switchgear. Installation Manual for Pressure Relief Ducts Uniswitch Medium Voltage Switchgear Installation Manual for Pressure Relief Ducts TABLE OF CONTENTS 1 Summary... 1 2 Transportation and storage... 2 2.1 Condition on delivery... 2 2.2 Unpacking at installation

More information

HEAVY DUTY PNEUMATIC

HEAVY DUTY PNEUMATIC HEAVY DUTY PNEUMATIC Series A4 MEDIUM DUTY HYDRAULIC Series H4 PERMANENTLY LUBRICATED HEAVY DUTY PNEUMATIC Series L4 586.778.7680 SERIES A4/L4/H4 39 A4/L4/H4 FEATURES 1 1 9 9 12 8 7 5 12 3 13 4 10 2 11

More information

RS Important Notes. Contact. Bicycle Maintenance Stand instructions manual. Warranty Period : 1 year (from the date of your purchase)

RS Important Notes. Contact. Bicycle Maintenance Stand instructions manual. Warranty Period : 1 year (from the date of your purchase) Warranty Period : 1 year (from the date of your purchase) RS-1700 Bicycle Maintenance Stand instructions manual (ver.1.2 2016/12) For more details, read the attached "Minoura Limited Warranty Policy" card.

More information

38999 Space grade ESA/SCC Section. MIL-DTL Space Grade Circular Connectors

38999 Space grade ESA/SCC Section. MIL-DTL Space Grade Circular Connectors 38999 Space grade ESA/SCC 3401 Section II MI-DT 38999 Space Grade Circular Connectors 59 38999 Space Grade ESA/SCC 3401 Contents 38999 Space Grade ESA/SCC 3401 SCC Specification.......................................................61

More information

ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 1 of 52 A-ARM, FLOOR PANEL, AND BUMPER ASSEMBLY

ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 1 of 52 A-ARM, FLOOR PANEL, AND BUMPER ASSEMBLY 2004 ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 1 of 52 A-ARM, FLOOR PANEL, AND BUMPER ASSEMBLY 2004 ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 2 of 52 A-ARM, FLOOR PANEL, AND BUMPER

More information

OPERATION MANUAL obl1 OPERATION MANUAL

OPERATION MANUAL   obl1 OPERATION MANUAL www.beerinnovations.com www.beerinnоvations.com obl1 1. Precuations (safety measures) In order to avoid personal injures and damaging the equipment, please carefully review following safety measures before

More information

18. Tailplane torque-tube

18. Tailplane torque-tube 18. Tailplane torque-tube Step 1 Fu se lage rear bulkhead Remove the three part templates of the rear bulkhead: an A4 size sheet from Annex A (page 5) and two A3 size sheets from Annex F of the manual,

More information

K0709 Quick-fit couplings

K0709 Quick-fit couplings Joints 1067 K0709 Quick-fit couplings with radial offset compensation external thread D1 SW SW1 application example: X max. D D 3 4 internal thread SW 3 4 2 SW1 D D Coupling part and claw in steel. Nut

More information

First the grid is assembled: bend it round so that the fixing hooks go from outside to inside.

First the grid is assembled: bend it round so that the fixing hooks go from outside to inside. How to install the low WOB kit The kit contains: * 2 grids (white) that are fixed at the inside of the counter lungs, next to the P ports, to keep the counter lungs open so that gas can flow in and out

More information

LAVA FENCING - (PANELS AND POSTS INCLUDED)

LAVA FENCING - (PANELS AND POSTS INCLUDED) LAVA FENCING - (PANELS AND POSTS INCLUDED) The below table is an estimate of the cost per m depending on gradient & layout STANDARD ITEM Excl Vat per m incl VAT 0.5m high fencing R 192.27 R 221.11 0.6m

More information

35 TON HYDRAULIC PUNCH WARNING

35 TON HYDRAULIC PUNCH WARNING OPERATORS GUIDE REL-35T-PNC 35 TON HYDRAULIC PUNCH NOTICE Sizes, weights and tool specifications listed in this manual are subject to change without notice. Please consult factory for information and updates.

More information

Parts Manual. Versa Hand Arm

Parts Manual. Versa Hand Arm Parts Manual Versa Hand Arm Insist Versa Hand To ensure u i our web site at www.labrieplus.com, or contact us at -800-23-277 USA or -877-83-8250 Canada twenty four hours a day. seven days a week. We are

More information

Assembly Instructions

Assembly Instructions CS-B-FM Assembly Instructions Thank you for purchasing a Shelti product. All of us at Shelti want you to be completely satisfied with your Pro Foos game, so feel free to contact us for help with the assembly

More information

ProtoTrak Knee Mill Model K3 ~ EMX Control 2 - Axis CNC ~ 3 - Axis DRO

ProtoTrak Knee Mill Model K3 ~ EMX Control 2 - Axis CNC ~ 3 - Axis DRO P# 0 DRILL 1/4" DIA. X.20 DP. (4) EQUALLY SPACED ON A.530 DIA. B.H.C. 1.625 DIA 1/8" SLOT X.05 DEEP (2).6875 RAD.5625 RAD.5962 Events ID On Print 10 Points.1875 Tool List 10 Points Events ID On Print Plot

More information

OMS Technical Information. Versions OMS. Versions

OMS Technical Information. Versions OMS. Versions Versions Versions Mounting flange Shaft Port size European version US version Drain connection Check valve Main type designation Standard flange Cyl. 32 G 1/2 l Yes Yes Cyl. 1.25 in 7/8-14 UNF l Yes Yes

More information

im,?har. In 4. Inventor: Wesley D. Burgess, His Attorney. years, is a Re fig. 4. o-6 o title?: 15! / 3.

im,?har. In 4. Inventor: Wesley D. Burgess, His Attorney. years, is a Re fig. 4. o-6 o title?: 15! / 3. April 18, 1950 W. D. BURGESS 2,504,642 METHOD FOR PUNCH PRESS SET UPS Filed July 23, 1945 3. Sheets-Sheet fig2.?t-o 2 fig1. -7 -- A " ' im,?har. In 4. o-6 o title?: 15! / 3. years, is a Re fig. 4. 23-e

More information

Hydraulic and Electrical Service Loop Pins

Hydraulic and Electrical Service Loop Pins Product Bulletin # TDS-164 Hydraulic and Electrical Service Loop Pins Affected Units All Canrig top drive models with a hydraulic and electrical service loop installed. Service Loop Pins The ends of the

More information

MAINTANCE MANUAL CNC ROTARY TABLE MODEL: DMNC-5C YUASA INTERNATIONAL.

MAINTANCE MANUAL CNC ROTARY TABLE MODEL: DMNC-5C YUASA INTERNATIONAL. MAINTANCE MANUAL CNC ROTARY TABLE MODEL: DMNC-5C YUASA INTERNATIONAL. INDEX DESCRIPTION PAGE (1)SPECIFICATION 2 (2)OUTSIDE DIMENSION LAYOUT 3 (3)INSPECTION REPORT 4 (4)PREPARATION FOR OPERATION 5 4-1.LUBRICATING

More information

TR-AUGER. Section C INDEX BOOT / HOPPER

TR-AUGER. Section C INDEX BOOT / HOPPER INDEX Section C TR-AUGER BOOT / HOPPER Description Page TR80 / TR100 x 51' basic auger... C2-3 TR80 / TR100 x 61' basic auger... C4-5 TR80 / TR100 x 71' basic auger... C6-7 TR Swing hopper... C8-9 TR-Boot

More information

Replaces Ryan Sod Cutter Parts

Replaces Ryan Sod Cutter Parts Replaces Ryan Sod Cutter Parts O.E.M 1 R250356 R&R Only R&R 12" Sod Cutter Blade, 1/4" x 2 1/2" 5,900 1 R250359 R&R Only R&R 15" Sod Cutter Blade, 1/4" x 2 1/2" 5,900 1 R250358 R&R Only R&R 16" Sod Cutter

More information

and CTS Pedal Cover Kit (MT/AT Applications )

and CTS Pedal Cover Kit (MT/AT Applications ) 2004-2007 and 2008-2012 CTS Pedal Cover Kit (MT/AT Applications ) PN s: L820110709 (2008-2012 CTS MT Wide Pedal) L820120709 (2008-2012 CTS MT) L820130709 (2008-2012 CTS AT) L820090704 (2004-2007 CTS MT

More information

Operator s/parts Manual

Operator s/parts Manual Operator s/parts Manual 24 & 30 Folding No-Till Drill Harrow Manufacturing, Inc. P.O. Box 5060 Salina, Kansas 67402-5060! Read the Operator s manual entirely. When you see this symbol, the subsequent instructions

More information

I.H.S INSTALLATION INSTRUCTIONS

I.H.S INSTALLATION INSTRUCTIONS I.H.S INSTALLATION INSTRUCTIONS TOOLS REQUIRED The following tools will be required for installation of your I.H.S. system. Item Qty Needed 9/16 Open End Wrench 2 3/4 Open End Wrench 1 1/2 Open End Wrench

More information

CAISSON SHAFT SYSTEM

CAISSON SHAFT SYSTEM CAISSON SHAFT SYSTEM Installation Guide INSTALLATION GUIDE FOR DN2000 TO DN3660 UNITS PLATE JOINTING SYSTEM This guide is to be used for the Installation of CPM Group Ltd caisson shaft units which use

More information

HEAVY DUTY H.S. DISCUS CAGE NET POLE NET POLE INSTALLATION

HEAVY DUTY H.S. DISCUS CAGE NET POLE NET POLE INSTALLATION 901020 - HEAVY DUTY H.S. DISCUS CAGE NET POLE NET POLE INSTALLATION www.gillathletics.com 800-637-3090 Install the pipe cap (PCAP00158002) at the top of the net pole. Install net pole pulley (73210042)

More information

SOLENOID VALVES AND PNEUMATIC VALVES

SOLENOID VALVES AND PNEUMATIC VALVES 9 S E R I E S Electropneumatically and pneumatically operated valves Series 9 Assembly with sub-base (ISO 5599/1 Standards) Sizes 1, 2 and 3 The Series 9 electropneumatically or pneumatically operated

More information

10.2. Basketball Single Post System

10.2. Basketball Single Post System Basketball Basketball Single Post System The basketball single post is made from special aluminium profiles. The structure is supported by one post in the ground. The post measures a cross section of 120

More information

1 0,1 0,1-70 0, , , , Cylinder bore <

1 0,1 0,1-70 0, , , , Cylinder bore < Working medium, air quality Working medium: Dry, filtered compressed air to ISO 8573-1 class 3.4.3. Recommended air quality for valves For best possible service life and trouble free operation, ISO 8573-1

More information

Riviera Draft Shaft Hole Boring

Riviera Draft Shaft Hole Boring Riviera Draft Shaft Hole Boring a. Height from bottom of hull thru the hull to the center of the drive shaft. This will be calculated. b. Height of drop of strut. The strut for the Riviera is 7.5 c. Distance

More information

F Fittings with 24 cone as per DIN EN ISO Fitting accessories, plug-type connectors, hydraulic pipes, pipe clamps, pressure gauges

F Fittings with 24 cone as per DIN EN ISO Fitting accessories, plug-type connectors, hydraulic pipes, pipe clamps, pressure gauges Fittings with 24 cone as per DIN EN ISO 8434-1 Fitting accessories, plug-type connectors, hydraulic pipes, pipe clamps, pressure gauges Issue 8-17 E F 9.300 Advantages NNWorldwide spread high-pressure

More information

This document will provide detailed specifications, a bill of materials (BOM), and assembly instructions for the Official Competition Field.

This document will provide detailed specifications, a bill of materials (BOM), and assembly instructions for the Official Competition Field. This document will provide detailed specifications, a bill of materials (BOM), and assembly instructions for the Official Competition Field. Please note that this field utilizes the VEX IQ Challenge Field

More information

Front Chainwheel. Dealer's Manual. Trekking ROAD MTB. Comfort XTR FC-M9000 FC-M9020 DEORE XT FC-T780 FC-T781 SORA FC-3503 FC-3550

Front Chainwheel. Dealer's Manual. Trekking ROAD MTB. Comfort XTR FC-M9000 FC-M9020 DEORE XT FC-T780 FC-T781 SORA FC-3503 FC-3550 (English) DM-FC0002-07 Front Chainwheel Dealer's Manual MTB XTR FC-M9000 FC-M9020 DEORE XT FC-M780 FC-M782 FC-M785 FC-M8000 SLX FC-M670 FC-M672 FC-M675 FC-M677 ZEE FC-M640 FC-M645 DEORE FC-M610 FC-M612

More information

AWWA C504 COMPLIANT VALVES FROM 3 THRU 108

AWWA C504 COMPLIANT VALVES FROM 3 THRU 108 AWWA C504 COMPLIANT VALVES FROM 3 THRU 108 PO Box 411 Berwick PA 18603 800-247-VALV www.crispinvalve.com 500 SERIES: Sizes 3-20 Available The K-Flo 500 Series is a heavy-duty resilient seated butterfly

More information

PIONEER OIL TOOLS LIMITED

PIONEER OIL TOOLS LIMITED Sir William Smith Road, Kirkton Industrial Estate, Arbroath, Angus, Scotland, UK. DD113RD Tel: +44 (0)1241 877776 Fax: +44 (0)1241 871037 Email: sales@pioneeroiltools.com Website: www.pioneeroiltools.com

More information

Model: 5100 OmniSteel Volleyball System

Model: 5100 OmniSteel Volleyball System Model: 5100 OmniSteel Volleyball System Installation, Operation and Maintenance Instructions Please read all instructions before attempting installation or operation of these units SAVE THESE INSTRUCTIONS

More information

SHOTGUN PISTOL. easing the cocking handle slowly to its rest position. Note: bolt cannot be cocked if safety is applied.

SHOTGUN PISTOL. easing the cocking handle slowly to its rest position. Note: bolt cannot be cocked if safety is applied. SHOTGUN PSTOL SPECFCATONS: CATEGORY............. HANDMADE - MPROVSED CALBRE......................... 410 TO.12 GAUGE CAPACTY........ SNGLE SHOT - DOUBLE BARREL VARANTS POSSBLE TYPE OF OPERATON.....................

More information

Front chainwheel. Dealer's Manual. ROAD MTB Trekking. City Touring/ Comfort Bike ACERA FC-M3000 FC-M3000-B2 FC-M ALTUS FC-M2000

Front chainwheel. Dealer's Manual. ROAD MTB Trekking. City Touring/ Comfort Bike ACERA FC-M3000 FC-M3000-B2 FC-M ALTUS FC-M2000 (English) DM-MDFC001-01 Dealer's Manual ROAD MTB Trekking City Touring/ Comfort Bike URBAN SPORT E-BIKE Front chainwheel ALIVIO FC-M4000 FC-M4050 FC-M4050-B2 FC-M4060 ACERA FC-M3000 FC-M3000-B2 FC-M3000-8

More information

Check Valves. Pilot Operated Check Valves. Vickers. 4CG-10, 20 Series 4CS-03, 20 Series 4CT-06/10, 20 Series. Basic Characteristics.

Check Valves. Pilot Operated Check Valves. Vickers. 4CG-10, 20 Series 4CS-03, 20 Series 4CT-06/10, 20 Series. Basic Characteristics. Vickers heck Valves Operated heck Valves 4G-10, 20 Series, 20 Series 4T-06/10, 20 Series Typical Section 4T1-06-D*-20-U, illustrating external drain and decompression features asic haracteristics Maximum

More information

Universal Anchoring Adapter For Mercedes

Universal Anchoring Adapter For Mercedes Universal Anchoring Adapter For Mercedes Anchoring Pin & Tube Set (For Most Mercedes Models) Users Manual 006 Chief Automotive Technologies, Inc. Chief s Limited One-Year Warranty & Liability CHIEF'S

More information

Parts Manual HEAVY DUTY RIGHT HAND ARM

Parts Manual HEAVY DUTY RIGHT HAND ARM Parts Manual HEAVY DUTY RIGHT HAND ARM Thank you for your purchase of a new Labrie. To ensure maximim reliability, on genuine replacement parts. Labrie Plus replacement parts are designed and manufactured

More information