P a t i s s e r i e a n d B a k i n g ( 1 1 B )
|
|
|
- Eleanor Lynch
- 5 years ago
- Views:
Transcription
1 P a t i s s e r i e a n d B a k i n g ( 1 1 B ) 30S/30E/30M A Culinary Arts Course
2
3 : P a t i s s e r i e a n d B a k i n g ( 1 1 B ) 3 0 S / 3 0 E / 3 0 M Course Description This course is intended for students wishing to pursue the Culinary Arts. Curriculum content focuses on the theory behind and preparation of patisserie and baking products such as yeast and non-yeast doughs, pies, cakes, tortes, icings, pastries, shortbreads, cookies, custards, fillings, and so on. Goal 1: Describe and apply appropriate sanitation, health, and safety practices as they relate to the culinary arts. GLO 1.1: Demonstrate appropriate personal hygiene practices. SLO 11B.1.1.1: SLO 11B.1.1.2: SLO 11B.1.1.3: SLO 11B.1.1.4: SLO 11B.1.1.5: SLO 11B.1.1.6: SLO 11B.1.1.7: SLO 11B.1.1.8: Define terminology associated with personal hygiene and hygienic practices. (A7.1) Describe the procedures used for handwashing. (A7.10) Practise personal hygiene and safe health standards. Adhere to the professional standards of dress, hygiene, and grooming. Identify and interpret codes, regulations, and federal, provincial/territorial, municipal requirements pertaining to kitchen sanitation and safe food-handling practices. (A7.2) Describe the procedures used to ensure personal hygiene and clean apparel. (A7.9) Identify and interpret food health regulations and guidelines associated with the practice of personal hygiene. (A7.7) Identify and interpret regulations and guidelines associated with wearing personal items. (A7.8) 8793: Patisserie and Baking (11B) 3
4 GLO 1.2: Demonstrate safe food-handling practices. SLO 11B.1.2.1: SLO 11B.1.2.2: SLO 11B.1.2.3: SLO 11B.1.2.4: SLO 11B.1.2.5: SLO 11B.1.2.6: Demonstrate safe food-handling practices in regard to patisserie and baking. Identify common food allergies found in patisserie and baking dishes, and determine appropriate substitutions. Describe the safe storage of stock equipment in service vehicles. (A3.11) Identify types of food-borne illnesses, their causes, and preventative measures. (A7.11) Identify types of food contamination, their causes, and preventative measures. (A7.12) Identify proper food-handling and storage techniques. (A7.13) GLO 1.3: Create and maintain a safe and sanitary work environment. SLO 11B.1.3.1: SLO 11B.1.3.2: SLO 11B.1.3.3: SLO 11B.1.3.4: SLO 11B.1.3.5: SLO 11B.1.3.6: SLO 11B.1.3.7: SLO 11B.1.3.8: SLO 11B.1.3.9: Create and maintain a safe work environment when working with garde manger ingredients and products. Identify regulations pertinent to care and cleanliness in the work area. (A3.3) Identify regulations relevant to the safe use of chemicals. (A3.4) Identify ergonomics. (A3.5) Identify, recognize, and control hazards. (A3.6, A3.10) Identify the hazards associated with working in a confined space and the preparation required to work safely in a confined space. (A3.7) (TSA 20) Describe safety practices and precautions related to the use of kitchen tools and equipment. (A6.2) Describe the importance of emergency planning procedures. Describe and follow substance abuse regulations. SLO 11B : Identify and outline workplace fire safety principles. (A3.8) (TSA 19) SLO 11B : Discuss the role of Workplace Safety and Health, and the procedures to follow in case of an incident (e.g., slips and falls, improper lifting, etc.) : Patisserie and Baking (11B)
5 SLO 11B : Describe the principles of the Workplace Hazardous Materials Information System (WHMIS) and identify the safety requirements as they apply to the culinary arts. (A3.9) (TSA 13) SLO 11B : Describe how the Workers Compensation Act relates to the profession of chef. SLO 11B : Describe procedures for dealing with burns and cuts. SLO 11B : Identify the safety principles for working on and around electrical equipment. (A3.6)(TSA 18) SLO 11B : Describe the three government levels of food/health inspection and the area each level controls. SLO 11B : Describe the Hazard Analysis Critical Control Points (HACCP) System and its use in food-service operations. (A7.14) SLO 11B : Demonstrate proper kitchen sanitation, personal hygiene, and food-handling and storage practices. (A7.15) SLO 11B : Identify safety and health requirements. (A3.1) SLO 11B : Describe and use appropriate personal protective equipment (PPE) (e.g., gloves, safety glasses or goggles, hearing protection, respirator mask) and identify PPE and procedures related to PPE. (A3.2) (TSA 16) SLO 11B : Demonstrate knowledge of safety equipment such as fire extinguisher, first aid kit, and eyewash station. (A3.8) SLO 11B : Identify sanitizing products and describe their applications and procedures for use. (A7.3) SLO 11B : Describe the three-sink method of sanitization. (A7.4) SLO 11B : Describe the procedures used to disassemble and assemble kitchen tools and equipment and their accessories for sanitizing purposes. (A7.5) SLO 11B : Describe the procedures used to maintain a sanitary foodservice operation. (A7.6) GLO 1.4: Demonstrate knowledge of the Trade Safety Awareness Manual (< safety/>). No applicable SLOs. 8793: Patisserie and Baking (11B) 5
6 Goal 2: Demonstrate the safe and appropriate operation, cleaning, and maintenance of kitchen equipment and cooking utensils. GLO 2.1: Demonstrate the safe and appropriate operation, cleaning, and maintenance of kitchen equipment and cooking utensils. SLO 11B.2.1.1: SLO 11B.2.1.2: SLO 11B.2.1.3: SLO 11B.2.1.4: SLO 11B.2.1.5: SLO 11B.2.1.6: SLO 11B.2.1.7: SLO 11B.2.1.8: SLO 11B.2.1.9: Demonstrate the safe and appropriate operation and/or use of tools and equipment associated with patisserie and baking. Demonstrate the safe and appropriate cleaning and maintenance of the equipment and utensils used in the preparation of patisserie and baking. Define terminology associated with kitchen tools and equipment. (A6.1) Identify types of knives and describe their characteristics, applications, and procedures for use. (A6.3) Identify the tools used to sharpen and hone knives, and describe their applications and procedures for use. (A6.4) Describe the procedures used to inspect and store knives. (A6.5) Demonstrate the safe and appropriate use of knives. Identify types of pots and pans, and describe their characteristics, applications, and procedures for use. (A6.6) Describe the procedures used to inspect and store pots and pans. (A6.7) SLO 11B : Identify types of utensils and describe their characteristics, applications, and procedures for use. (A6.8) SLO 11B : Describe the procedures used to inspect and store utensils. (A6.9) SLO 11B : Identify types of equipment and appliances, and describe their accessories, applications, and procedures for use. (A6.10) SLO 11B : Describe the procedures used to inspect, maintain, and store equipment and appliances. (A6.11) SLO 11B : Demonstrate proper use of kitchen tools and equipment and their maintenance and procedures for use. (A6.12) SLO 11B : Identify bakeshop tools and equipment, and describe their applications. (I1.6) : Patisserie and Baking (11B)
7 Goal 3: Demonstrate the appropriate receiving, handling, quality assurance, storage, pre-preparation, preparation, and presentation of different types of food and beverage. GLO 3.1: Demonstrate the appropriate receiving, handling, quality assurance, and storage of different types of food and beverage. SLO 11B.3.1.1: SLO 11B.3.1.2: SLO 11B.3.1.3: SLO 11B.3.1.4: SLO 11B.3.1.5: Demonstrate the procedures used to receive, inspect, handle, and store patisserie and baking ingredients and products. (A11.7, I1.7) Describe the procedures used to handle and store bread products. (I3.9) Describe the procedures used to handle and store pies, tarts, flans, and fillings. (I5.10) Describe the procedures used to label, date, initial, and rotate stock. (A11.5) Describe the procedures used to handle and store cookies. (I4.7) GLO 3.2: Demonstrate the appropriate pre-preparation (mise en place), preparation, and presentation of different types of food and beverage. SLO 11B.3.2.1: SLO 11B.3.2.2: SLO 11B.3.2.3: SLO 11B.3.2.4: SLO 11B.3.2.5: SLO 11B.3.2.6: SLO 11B.3.2.7: SLO 11B.3.2.8: SLO 11B.3.2.9: Discuss the baking process. Describe cakes and decorating procedures. Describe icings and frostings. Prepare cakes. Describe the purpose of convenience foods (e.g., frozen, unbaked pies). Prepare a variety of convenience foods as per package instructions. Describe custards, creams, and puddings. Prepare, bake, and serve or store a variety of custards, creams, and puddings. Describe fruit and berry desserts. SLO 11B : Prepare, cook, and serve or store a variety of fruit and berry desserts. SLO 11B : Demonstrate the artful portioning, presenting, and plating of patisserie and baking. SLO 11B : Identify mixing methods used for bread products and describe their associated procedures. (I3.6) 8793: Patisserie and Baking (11B) 7
8 SLO 11B : Describe and demonstrate the procedures used to prepare and finish bread products. (I3.7, I3.8, I3.10) SLO 11B : Identify methods of mixing and make-up used to prepare cookies and describe their associated procedures. (I4.4) SLO 11B : Describe plating/buffet and finishing techniques for cookies, pies, tarts, and flans. (I4.6, I5.9) SLO 11B : Demonstrate the procedures used to prepare cookies. (I4.8) SLO 11B : Describe and demonstrate the procedures used to prepare pies, tarts, flans, and fillings. (I5.8, I5.11) SLO 11B : Determine doneness of baked products. Goal 4: Demonstrate an understanding of food, ingredients, recipes, menus, food costing, and nutrition. GLO 4.1: Demonstrate an understanding of the characteristics of foods and ingredients, and how these characteristics are used to prepare food, and design recipes and menus. SLO 11B.4.1.1: SLO 11B.4.1.2: SLO 11B.4.1.3: SLO 11B.4.1.4: SLO 11B.4.1.5: SLO 11B.4.1.6: SLO 11B.4.1.7: SLO 11B.4.1.8: SLO 11B.4.1.9: List and describe types of fats. Describe sugar commodities. Describe the purpose of convenience foods (e.g., frozen, unbaked pies). Determine the factors to consider when identifying and selecting ingredients for patisserie and baking. Define terminology associated with baking ingredients. (I1.1) Identify bakeshop ingredients, and describe their characteristics and applications. (I1.2) Identify the factors to consider when selecting ingredients for bakeshop items. (I1.3) Identify market forms (pre-prepared and packaged) of baking products, and describe their characteristics and applications. (I1.4) Define terminology associated with bread products. (I3.1) SLO 11B : Identify types of bread products, and describe their characteristics and applications. (I3.2) SLO 11B : Identify ingredients used in breads, and describe their characteristics and applications. (I3.3) SLO 11B : Identify the factors to consider when selecting ingredients for bread products. (I3.5) SLO 11B : Define terminology associated with cookies. (I4.1) : Patisserie and Baking (11B)
9 SLO 11B : Identify types of cookies, and describe their characteristics and applications. (I4.2) SLO 11B : Identify characteristics of cookies and the causes of these characteristics. (I4.3) SLO 11B : Identify market forms (pre-prepared and packaged) of cookies and describe their applications. (I4.5) SLO 11B : Define terminology associated with pies, tarts, flans, and fillings. (I5.1) SLO 11B : Identify types of dough used for pies, tarts, and flans, and describe their characteristics and applications. (I5.2) SLO 11B : Identify types of fillings, and describe their characteristics and applications. (I5.3) SLO 11B : Identify ingredients used in pies, tarts, flans, and fillings. (I5.4) SLO 11B : Identify the factors to consider when selecting ingredients for pies, tarts, flans, and fillings, and describe their characteristics and applications. (I5.6) SLO 11B : Identify market forms (pre-prepared and packaged) of pies, tarts, flans, and fillings, and describe their characteristics and applications. (I5.7) GLO 4.2: Demonstrate an understanding of recipes, menus, and food costing. SLO 11B.4.2.1: SLO 11B.4.2.2: Demonstrate how to follow a recipe for creating patisserie and baking dishes. Explain why weighing is a more effective way to measure baking ingredients than standard volume measures. GLO 4.3: Demonstrate an understanding of nutrition. SLO 11B.4.3.1: Identify the nutritional components of patisserie and baking products, and their place in a healthy lifestyle. 8793: Patisserie and Baking (11B) 9
10 Goal 5: Apply the transferable, cross-curricular knowledge and skills, as they relate to the culinary arts (chemistry, English language arts, food science, French, nutrition, mathematics, etc.). GLO 5.1: Read, interpret, and communicate information. SLO 11B.5.1.1: SLO 11B.5.1.2: SLO 11B.5.1.3: SLO 11B.5.1.4: SLO 11B.5.1.5: SLO 11B.5.1.6: Demonstrate how to follow a recipe for creating patisserie and baking dishes. Identify effective communication practices. (A4.1) Identify the types of communication methods and equipment, and describe their applications. (A4.2) Describe the importance of effective verbal, non-verbal, and written communication with customers, suppliers, and employees. (A4.3) Communicate effectively using verbal and non-verbal techniques. (A4.4) Demonstrate effective communication principles. (A4.5) GLO 5.2: Apply mathematics knowledge and skills relevant to the culinary arts. SLO 11B.5.2.1: SLO 11B.5.2.2: SLO 11B.5.2.3: SLO 11B.5.2.4: SLO 11B.5.2.5: SLO 11B.5.2.6: Convert total yield/ratio and portion sizes of patisserie and baking recipes. Demonstrate the proficient use of fractions, ratios, decimals, and percentages. Demonstrate the proficient conversion between the metric and standard (or imperial) systems of measurement. Convert weights and measures between metric and standard systems of measurement for recipes. Describe measurement procedures for ingredients. Calculate formulas and bakers percentages for all baked products. (I1.5, I3.4, I5.5) GLO 5.3: Apply chemistry knowledge and skills relevant to the culinary arts. SLO 11B.5.3.1: Demonstrate an understanding of how baking powder, baking soda, and yeast are used to leaven baked products : Patisserie and Baking (11B)
11 Goal 6: Demonstrate awareness of sustainability as it pertains to the culinary arts. GLO 6.1: Describe the culinary arts industry s sustainability practices and impact on the environment. SLO 11B.6.1.1: SLO 11B.6.1.2: SLO 11B.6.1.3: SLO 11B.6.1.4: Identify the waste produced in a culinary arts facility. Demonstrate the disposal and recycling of waste. Rotate stock in a way to minimize waste (e.g., FIFO the first one in is the first one out). Identify and locate facilities for recycling and waste disposal. Goal 7: Demonstrate awareness of the ethical and legal standards that pertain to the culinary arts. GLO 7.1: Identify and follow the ethical and legal standards that pertain to the culinary arts. No applicable SLOs. Goal 8: Demonstrate the employability skills required in the culinary arts. GLO 8.1: Demonstrate fundamental employability skills. SLO 11B.8.1.1: SLO 11B.8.1.2: SLO 11B.8.1.3: SLO 11B.8.1.4: Demonstrate employability skills (e.g., being prepared for work on time, setting up workstations, staying on task, accepting responsibility for their actions, and so on). Demonstrate professional dress code. Demonstrate the skills required to work as a member of a team. Demonstrate initiative in performing tasks. Goal 9: Demonstrate an understanding of working conditions and career opportunities in the culinary arts. GLO 9.1: Demonstrate an understanding of working conditions and career opportunities in the culinary arts. SLO 11B.9.1.1: Demonstrate an understanding of the career opportunities in baking and patisserie. 8793: Patisserie and Baking (11B) 11
12 Goal 10: Demonstrate an understanding of the evolution and technological progression of, and the emerging trends in the culinary arts. GLO 10.1: Demonstrate an understanding of the evolution and technical progression of, and the emerging trends in the culinary arts. SLO 11B : Demonstrate an understanding of the evolution and technical progression of, and the emerging trends in patisserie and baking : Patisserie and Baking (11B)
V e g e t a b l e s, F u n g i, S t a r c h e s, a n d F a r i n a c e o u s P r o d u c t s ( 1 1 C )
8 7 9 4 V e g e t a b l e s, F u n g i, S t a r c h e s, a n d F a r i n a c e o u s P r o d u c t s ( 1 1 C ) 30S/30E/30M A Culinary Arts Course 8 7 9 4 : V e g e t a b l e s, F u n g i, S t a r c h
B r e a k f a s t a n d D a i r y ( 1 2 B )
8 7 9 6 B r e a k f a s t a n d D a i r y ( 1 2 B ) 40S/40E/40M A Culinary Arts Course 8 7 9 6 : B r e a k f a s t a n d D a i r y ( 1 2 B ) 4 0 S / 4 0 E / 4 0 M Course Description This course is intended
E x p l o r a t i o n o f B a k i n g a n d P a s t r y A r t s ( 9 )
8 2 3 1 E x p l o r a t i o n o f B a k i n g a n d P a s t r y A r t s ( 9 ) 15S/15E/15M 10S/10E/10M A Baking and Pastry Arts Course 8 2 3 1: E x p l o r a t i o n o f B a k i n g a n d P a s t r y A
M o d e r n a n d C l a s s i c D e s s e r t s, a n d P l a t i n g T e c h n i q u e s ( 1 2 B )
8 3 7 4 M o d e r n a n d C l a s s i c D e s s e r t s, a n d P l a t i n g T e c h n i q u e s ( 1 2 B ) 40S/40E/40M A Baking and Pastry Arts Course 8 3 7 4 : M o d e r n a n d C l a s s i c D e s s
C a k e s, F i l l i n g s, I c i n g s,
8 3 5 8 C a k e s, F i l l i n g s, I c i n g s, a n d D e c o r a t i o n s ( 1 1 C ) 30S/30E/30M A Baking and Pastry Arts Course 8 3 5 8 : C a k e s, F i l l i n g s, I c i n g s, a n d D e c o r a
Y e a s t - D o u g h P r o d u c t s ( 1 1 B )
8 3 3 9 Y e a s t - D o u g h P r o d u c t s ( 1 1 B ) 30S/30E/30M A Baking and Pastry Arts Course 8 3 3 9 : Y e a s t - D o u g h P r o d u c t s ( 1 1 B ) 3 0 S / 3 0 E / 3 0 M Course Description This
I n t r o d u c t I o n t o c o l l I s I o n r e p a I r a n d r e f I n I s h I n g t e c h n o l o g y ( 1 0 )
9 0 2 9 I n t r o d u c t I o n t o c o l l I s I o n r e p a I r a n d r e f I n I s h I n g t e c h n o l o g y ( 1 0 ) 20S/20E/20M A Collision Repair and Refinishing Technology Course 9 0 2 9 : I n
I n t r o d u c t i o n t o H e a v y D u t y E q u i p m e n t T e c h n o l o g y ( 1 0 )
8 6 7 3 I n t r o d u c t i o n t o H e a v y D u t y E q u i p m e n t T e c h n o l o g y ( 1 0 ) 20S/20E/20M A Heavy Duty Equipment Technician Course 8 6 7 3 : I n t r o d u c t i o n t o H e a v y
A u t o m o t i v e E l e c t r i c a l S y s t e m s ( 1 2 A )
8 7 0 0 A u t o m o t i v e E l e c t r i c a l S y s t e m s ( 1 2 A ) 40S/40E/40M An Automotive Technology Course 8 7 0 0 : A u t o m o t i v e E l e c t r i c a l S y s t e m s ( 1 2 A ) 4 0 S / 4
C N C M a c h i n i n g ( 1 2 D )
8 8 5 8 C N C M a c h i n i n g ( 1 2 D ) 40S/40E/40M A Machining Technology Course 8 8 5 8 : C N C M a c h i n i n g ( 1 2 D ) 4 0 S / 4 0 E / 4 0 M Course Description Students develop skills and knowledge
B a s i c G M A W ( M I G ) P r o c e d u r e s ( 1 1 B )
8 4 7 4 B a s i c G M A W ( M I G ) P r o c e d u r e s ( 1 1 B ) 30S/30E/30M A Welding Technology Course 8 4 7 4 B a s i c G M A W ( M I G ) P r o c e d u r e s ( 1 1 B ) 3 0 S / 3 0 E / 3 0 M Course
W e l d - O n a n d B O l t - O n P a n e l R e P l a c e m e n t ( 1 2 B )
9 0 3 4 W e l d - O n a n d B O l t - O n P a n e l R e P l a c e m e n t ( 1 2 B ) 40S/40E/40M A Collision Repair and Refinishing Technology Course 9 0 3 4 : W e l d - O n a n d B O l t - O n P a n e
A d v a n c e d G M A W ( M I G ) W e l d i n g P r o c e s s e s a n d P r o c e d u r e s ( 1 2 A )
8 4 8 7 A d v a n c e d G M A W ( M I G ) W e l d i n g P r o c e s s e s a n d P r o c e d u r e s ( 1 2 A ) 40S/40E/40M A Welding Technology Course 8 4 8 7 A d v a n c e d G M A W ( M I G ) W e l d
M i l l i n g O p e r a t i o n s I ( 1 1 C )
8 8 5 4 M i l l i n g O p e r a t i o n s I ( 1 1 C ) 30S/30E/30M A Machining Technology Course 8 8 5 4 : M i l l i n g O p e r a t i o n s I ( 1 1 C ) 3 0 S / 3 0 E / 3 0 M Course Description Students
E x p l o r a t i o n o f J e w e l l e r y / M e t a l s m i t h i n g ( 9 )
8 7 6 8 E x p l o r a t i o n o f J e w e l l e r y / M e t a l s m i t h i n g ( 9 ) 15S/15E/15M 10S/10E/10M A Jewellery/Metalsmithing Course 8 7 6 8 : E x p l o r a t i o n o f J e w e l l e r y / M
A u t o m o t i v e m e t A l s A n d W e l d i n g ( 1 1 B )
9 0 3 1 A u t o m o t i v e m e t A l s A n d W e l d i n g ( 1 1 B ) 30S/30E/30M A Collision Repair and Refinishing Technology Course 9 0 3 1 : A u t o m o t i v e m e t A l s A n d W e l d i n g ( 1
A p p l i e d H e a v y D u t y E q u i p m e n t T e c h n o l o g y ( 1 2 D )
8 7 0 4 A p p l i e d H e a v y D u t y E q u i p m e n t T e c h n o l o g y ( 1 2 D ) 40S/40E/40M A Heavy Duty Equipment Technician Course 8 7 0 4 : A p p l i e d H e a v y D u t y E q u i p m e n t
B a s i c H a i r c u t t i n g a n d T h e r m a l S t y l i n g ( 1 0 C )
8 3 1 4 B a s i c H a i r c u t t i n g a n d T h e r m a l S t y l i n g ( 1 0 C ) 20S/20E/20M A Hairstyling Course 8 3 1 4 : B a s i c H a i r c u t t i n g a n d T h e r m a l S t y l i n g ( 1 0 C
D a m a g e a n a l y s i s a n D s t r u c t u r a l r e p a i r s ( 1 2 a )
9 0 3 3 D a m a g e a n a l y s i s a n D s t r u c t u r a l r e p a i r s ( 1 2 a ) 40S/40E/40M A Collision Repair and Refinishing Technology Course 9 0 3 3 : D a m a g e a n a l y s i s a n D s t r
S p a S e r v i c e s ( 1 2 D )
9 0 7 8 S p a S e r v i c e s ( 1 2 D ) 40S/40E/40M An Esthetics Course 9 0 7 8 : S p a S e r v i c e s (1 2 D) 4 0 S / 4 0 E / 4 0 M Course Description The emphasis in this course is on aromatherapy,
B a s i c S M A W ( A R C ) P r o c e d u r e s ( 1 1 C )
8 4 8 6 B a s i c S M A W ( A R C ) P r o c e d u r e s ( 1 1 C ) 30S/30E/30M A Welding Technology Course 8 4 8 6 B a s i c S M A W ( A R C ) P r o c e d u r e s ( 1 1 C ) 3 0 S / 3 0 E / 3 0 M Course
A p p l i e d C a r p e n t r y ( 1 2 D )
9 1 9 4 A p p l i e d C a r p e n t r y ( 1 2 D ) 40S/40E/40M A Carpentry Course 9 1 9 4 A p p l i e d C a r p e n t r y ( 1 2 D ) 4 0 S / 4 0 E / 4 0 M Course Description In this course, students will
I n t e r m e d i a t e H a i r c u t t i n g ( 1 1 A ) 30S/30E/30M. a n d B a r b e r i n g T e c h n i q u e s. A Hairstyling Course
8 3 1 6 I n t e r m e d i a t e H a i r c u t t i n g a n d B a r b e r i n g T e c h n i q u e s ( 1 1 A ) 30S/30E/30M A Hairstyling Course 8 3 1 6 : I n t e r m e d i a t e H a i r c u t t i n g a n
F u n d a m e n t a l s o f G r a p h i c D e s i g n
9 1 3 6 F u n d a m e n t a l s o f G r a p h i c D e s i g n 20S/20E/20M A Graphic Design Course 9 1 3 6 : F u n d a m e n t a l s o f G r a p h i c D e s i g n 2 0 S / 2 0 E / 2 0 M Course Description
M e t a l D e s i g n / F a b r i c a t i o n & O x y - A c e t y l e n e P r o c e d u r e s ( 1 1 A )
8 4 1 4 M e t a l D e s i g n / F a b r i c a t i o n & O x y - A c e t y l e n e P r o c e d u r e s ( 1 1 A ) 30S/30E/30M A Welding Technology Course 8 4 1 4 M e t a l D e s i g n / F a b r i c a t
F o r m a l W e a r D e s i g n a n d C o n s t r u c t i o n ( 1 2 B )
9 1 3 1 F o r m a l W e a r D e s i g n a n d C o n s t r u c t i o n ( 1 2 B ) 40S/40E/40M A Fashion Design and Technology Course 9 1 3 1 : F o r m a l W e a r D e s i g n a n d C o n s t r u c t i o
R e l a t e d S a l o n S e r v i c e s ( 1 0 D )
8 3 1 5 R e l a t e d S a l o n S e r v i c e s ( 1 0 D ) 20S/20E/20M A Hairstyling Course 8 3 1 5 : R e l a t e d S a l o n S e r v i c e s ( 1 0 D ) 2 0 S / 2 0 E / 2 0 M Course Description Curriculum
K n i t w e a r D e s i g n a n d C o n s t r u c t i o n ( 1 1 A )
9 1 2 6 K n i t w e a r D e s i g n a n d C o n s t r u c t i o n ( 1 1 A ) 30S/30E/30M A Fashion Design and Technology Course 9 1 2 6 : K n i t w e a r D e s i g n a n d C o n s t r u c t i o n 3 0 S
G r a d e 1 2 D A d v a n c e d M i l l w o r k
G r a d e 1 2 D A d v a n c e d M i l l w o r k G r a d e 1 2 D : A d v a n c e d M i l l w o r k Course Description Carpentry 12D: Advanced Millwork is intended for students transitioning from the carpentry
A i r c r a f t E l e c t r i c a l S y s t e m s ( 1 2 B )
8 5 4 9 A i r c r a f t E l e c t r i c a l S y s t e m s ( 1 2 B ) 40S/40E/40M An Aviation and Aerospace Technologies Course 8 5 4 9 : A i r c r a f t E l e c t r i c a l S y s t e m s ( 1 2 B ) 4 0
C o d i n g f o r i n t e r a C t i v e d i g i t a l M e d i a
9 0 9 7 C o d i n g f o r i n t e r a C t i v e d i g i t a l M e d i a 30S/30E/30M An Interactive Digital Media Course 9 0 9 7 : C o d i n g f o r i n t e r a C t i v e d i g i t a l M e d i a 3 0 S
Grades 9 to 12 Heavy Duty Equipment Technician. Manitoba Technical-Vocational Curriculum Framework of Outcomes
Grades 9 to 12 Heavy Duty Equipment Technician Manitoba Technical-Vocational Curriculum Framework of Outcomes G r a d e s 9 t o 1 2 H e a v y D u t y E q u i p m e n t T e c h n i c i a n Manitoba Technical-Vocational
SAFETY AND OSHA GUIDELINE CURRICULUM
SAFETY AND OSHA GUIDELINE CURRICULUM CertiLearn - Non-Industrial OSHA Safety Guidelines These courses are ideal for any small business or non-industrial environment Safety Basics In this course you will
P r o j e c t M a n a g e M e n t f o r I n t e r a c t I v e D I g I t a l M e D I a
9 1 0 0 P r o j e c t M a n a g e M e n t f o r I n t e r a c t I v e D I g I t a l M e D I a 40S/40E/40M An Interactive Digital Media Course 9 1 0 0 : P r o j e c t M a n a g e M e n t f o r I n t e
COMPANY NAME Title: Document: Effective Date: Supersedes Date: Reason For Revision:
Page 1 of 7 1. PURPOSE 1.1 To create an organized FSMA PC Rule risked- base Food Safety Plan for Company Name ensuring all Food Safety Plan Hazards are identified and Preventive Controls are maintained,
SPECIALIZED ONLINE TRAINING COURSE LIST
SPECIALIZED ONLINE TRAINING COURSE LIST Grainger Online Safety Manager provides you with access to online training courses covering today's most relevant safety topics. The training content is designed
Collision Repair Shop Inspection Checklist
Collision Repair Shop Inspection Checklist Note: This is a sample inspection chesklist only, and may mot include all appropriate inspection items. The Occupational Health and Safety Regulation specifies
C l o t h i n g a n d T e x t i l e s ( 7 ) A Middle Years Human Ecology Course
0 4 8 6 C l o t h i n g a n d T e x t i l e s ( 7 ) A Middle Years Human Ecology Course Human Ecology Clothing & Clothing & Textiles Family Family Studies Studies the progression of Home Economics & Food
WHMIS 1988 & WHMIS 2015
WHMIS 2015 Awareness AN AWARENESS PROGRAM ON THE UPDATED Workplace Hazardous Materials Information System WHMIS 1988 & WHMIS 2015 WHMIS Overview 2 WHMIS Overview WHMIS first came into effect on October
Working safely in an engineering environment
Unit 001 Working safely in an engineering environment Level: 2 Credit value: 5 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to work
Risk Services Best Practices Bulletin Food Preparation Presented by Office of the President Risk Services May 2012
Food Preparation Presented by Office of the President Risk Services May 2012 Throughout the UC system, dining staff are among the highest occupational groups at risk for injury. Their high frequency and
General Requirements for Personal Protective Equipment
3.10.1 OVERVIEW This section describes procedures for ensuring that employees, students and visitors are protected from hazards through the use of personal protective equipment (PPE). (WAC 296-800-160)
You may also contact Corporate Health & Safety by Workers Name Department. Supervisor Name Department.
P a g e 1 WHMIS 2015 Practical Workplace Exercise Congratulations you have completed the Online WHMIS 2015 education module. The next step is to complete a practical workplace exercise with your supervisor
student team competition
chapter 6 student team competition Team Composition All teams must be comprised of one team manager who is an ACF member in good standing, four team members, and an alternate. All team members must be
Chapter 11 Cleaning and Sanitizing
Chapter 11 Cleaning and Sanitizing How and When to Clean and Sanitize Cleaning Process of removing food and other dirt from a surface All surfaces must be cleaned and rinsed Sanitizing Process of reducing
Hazardous Materials Management. Presented by. James E. Roughton, MS, CSP, CRSP, CHMM.
Hazardous Materials Management Presented by. James E. Roughton, MS, CSP, CRSP, CHMM. Hazardous Waste Operations And Emergency Response (HAZWOPER) 29 CFR 1910.120 Scope Clean-up Operations At Uncontrolled
2016 Wichita County 4-H Food Challenge Thursday, November 10, 2016 The Stone Palace, 1211 Indiana Ave (downtown)
2016 Wichita County 4-H Food Challenge Thursday, November 10, 2016 The Stone Palace, 1211 Indiana Ave (downtown) ENTRIES Deadline to Enter: November 4, 2016; 5:00 p.m. Entry fee: $25.00 per team Entry
Concordia College Moorhead, Minn.
Concordia College Moorhead, Minn. Title: Employee Right-to-Know/Hazard Communication Effective: 8-20-97; 6-19-00 ; 8-1-03; 8-6-07 Purpose: Concordia College is firmly committed to providing all its employees
WORK HEALTH AND SAFETY
Employees in South Australia are protected by and required to adhere to State & National health and safety regulations. Employers, employees and others all have an important role to play. For further information
Food Safety Management Systems
Food Safety Management Systems Food safety management system: Group of practices and procedures intended to prevent foodborne illness Actively controls risks and hazards throughout the flow of food 8-2
IMMANUEL CHURCH, CHICHESTER HEALTH AND SAFETY POLICY
IMMANUEL CHURCH, CHICHESTER HEALTH AND SAFETY POLICY Approved by the Trustees: November 2016 Health and Safety Policy Introduction The main piece of health and safety legislation is the Health and Safety
HAZARD COMMUNICATION Plan Globally Harmonized System
HAZARD COMMUNICATION Plan Globally Harmonized System GENERAL: In order to comply with 29 CFR 1910.1200, the following written Hazard Communication Program (HCP) is to be implemented for personnel of this
2015 Parker County 4-H Food Challenge
2015 Parker County 4-H Food Challenge Date: Wednesday, October 14, 2015 Location: Parker County Extension Office Time: 6:00p.m. Entries Due: Thursday, October 8, 2015 Entry Requirements: Junior/Intermediate
C l o t h i n g a n d T e x t i l e s ( 8 ) A Middle Years Human Ecology Course
0 4 8 6 C l o t h i n g a n d T e x t i l e s ( 8 ) A Middle Years Human Ecology Course Human Ecology Clothing & Clothing & Textiles Family Family Studies Studies the progression of Home Economics & Food
Food Wranglers Challenge. Friday- October 14, :00 8:30 p.m.
2 nd Annual Harris County Youth Fair Food Wranglers Challenge Friday- October 14, 2016-5:00 8:30 p.m. Houston Farm & Ranch at the Saltgrass Building, Houston, TX 77084 Join us for the 2nd Annual Food Wranglers
ONLINE SAFETY TRAINING PROGRAM SUMMARY
Act First Safety provides best-in-class online/e-learning opportunities for employers and workers. With a selection of 17 programs, including eight (8) programs in French. Choosing Act First Safety is
National 4-H Food Challenge Rules & Policies
National 4-H Food Challenge Rules & Policies - 2018 Contest Eligibility: 1. A state/territory/district of Columbia is permitted to enter four teams into the National 4- H Food Challenge contest each year.
SAFETY POLICY AND PROCEDURE MANUAL QUESTIONNAIRE
The following questionnaire is designed to aid us in the creation of your policy and procedure manual. Please place a checkmark in the boxes that correspond to the sections that you would like to be included
11/7/2011. Chemical Hazards and Controls for Rehabilitation Professionals. What is a chemical hazard? Toxicology. Module 3
Chemical Hazards and Controls for Rehabilitation Professionals Module 3 What is a chemical hazard? A chemical hazard is a chemical that, because of its characteristics and effects, may cause harm to an
HOW-TO CONDUCT A WEEKLY SAFETY MEETING
HOW-TO CONDUCT A WEEKLY SAFETY MEETING 1. Hold the meeting on the job, preferably where everyone can sit and relax. 2. Hold the meeting at the beginning of the shift, right after lunch, or after a break.
CRAFT AND PRODUCE SECTION
DALKEITH AGRICULTURAL SOCIETY CRAFT AND PRODUCE SECTION FRUIT n VEG To be held in DALKEITH COUNTRY PARK DALKEITH By kind permission of the Duke of Buccleuch on SATURDAY, 8th JULY 2017 ENTRIES CLOSE ON
Personal Protective Equipment
Northland Community & Technical College June 1, 2017 Personal Protective Equipment Safety Officer Cory Feller Chemical Hygiene Officer Kristel Kizer Telephone: 218-683-8633 1 Personal Protective Equipment
Bachelor of Paramedic Science
Bachelor of Paramedic Science Practical Workshop Safety Induction Paramedic Teaching Suite and Paramedic Shed Evacuation Evacuation procedures - displayed in the corridors of Paramedic Teaching Suite.
Training Curriculum Guidelines - (Non-mandatory) App
[Text Only] Regulations (Standards - 29 CFR) Training Curriculum Guidelines - (Non-mandatory) - 1910.120 App Regulations (Standards - 29 CFR) - Table of Contents Part Number: 1910 Part Title: Occupational
4-H Food Challenge 2014
4-H Food Challenge 2014 This contest, modeled after the Food Network s Iron Chef, challenges teams of 4-H members to create a dish using only a predetermined number of ingredients and their knowledge of
LABORATORY HAZARD AWARENESS TRAINING
Open minds. Open doors. TM LABORATORY HAZARD AWARENESS TRAINING FOR NON LABORATORY PERSONNEL Objectives Hazard Awareness Be familiar with the hazards, warning signs and labels Protective measures PPE Training
POLICY ON THE PROVISION & USE OF PERSONAL PROTECTIVE EQUIPMENT
POLICY ON THE PROVISION & USE OF PERSONAL PROTECTIVE EQUIPMENT June 2013 Lead Manager John Green, Health & Safety Service Manager Responsible Director Director of Human Resources Approved By Health and
MENDON GOLF CLUB GROUNDS DEPARTMENT HAZARDOUS MATERIAL STANDARD OPERATING PROCEEDURES (SOP)
MENDON GOLF CLUB GROUNDS DEPARTMENT HAZARDOUS MATERIAL STANDARD OPERATING PROCEEDURES (SOP) General Policy: The Mendon Golf Club Grounds Department has created this document to outline the procedures for
Experimental Design Unit. Grade 10 Science Ms. Hayduk
Experimental Design Unit Grade 10 Science Ms. Hayduk Safety Why is Safety Important? Why is safety important? Read the article. Discuss the following questions with the person next to you: What did the
Personal Protective Equipment. Individual Unit Function: Safety Procedure No.: SOP-0147 Page: 1 of 9
Procedure No.: SOP-0147 Page: 1 of 9 1. PURPOSE This procedure describes the minimum requirements concerning personal protective equipment for personnel who are exposed to areas or tasks where hazards
CONSTRUCTSAFE TIER 1 HEALTH AND SAFETY COMPETENCY TEST FRAMEWORK
CONSTRUCTSAFE TIER 1 HEALTH AND SAFETY COMPETENCY TEST FRAMEWORK ConstructSafe Project Team March 2018 Version 1.3 1 Table of Contents 1. Introduction... 3 2. Candidate minimum required knowledge... 3
Health and Safety Program Inspections
POLICY: It is CPP s policy to maintain a program of safety inspections. The objective of this program is to control and mitigate hazards in the workplace and worksite. All CPP s facilities and worksites
PPE and Tools PPE and Tools
PPE and Tools PPE and Tools PPE Definition Personal protective equipment (PPE) refers to protective clothing, helmets, goggles, or other garments or equipment designed to protect the wearer's body from
Seed Treatment Safety and Regulations Crop Protection Perspective. Chip Witcher / Staff Industrial Hygienist / Syngenta Crop Protection
Seed Treatment Safety and Regulations Crop Protection Perspective Chip Witcher / Staff Industrial Hygienist / Syngenta Crop Protection Objectives The objectives of this presentation are to... - Describe
EHS Workplace Inspection Checklist (Ref. SOP QMS-080; EHS-010)
(Ref. SOP QMS-080; EHS-010) Form-445 Inspected by: Date of inspection Date of Report Report # Pages Area Manager: Area Inspected: General This EHS Workplace Inspection was conducted by: Scope of the Inspection:
Do you have a written, effective Injury and Illness Prevention Program (IIPP)? Does everyone know who is responsible for the IIPP in the worksite?
HEALTH HAZARD AND ASSESSMENT SAFETY COMMITTEES CHECKLIST HAZARD ASSESSMENT CHECKLIST AG TOOL 2 1 Sample Safety Inspection Checklist Workplace: Date: Inspected by: Each No answer may indicate a problem.
Standards of Practice Personal Protective Equipment
Document Authority: I. PURPOSE Standards of Practice Personal Protective Equipment Whenever feasible, hazards must be eliminated through engineering, and/or administrative controls, prior to resorting
B S Glass Ltd Safety procedures- outsourced Workplaces
B S Glass Ltd Jan 17 B S Glass Ltd Safety procedures- outsourced Workplaces Index - - - - - - - - Page No On Site safety - - - - - - - - - - - - - - - - - - - Content 3. 1.00 Health and Safety Mission
PERFORMANCE CRITERIA
FPICOR2006A Unit Descriptor Pre-requisite Unit(s) Application of the Unit Competency Field Sector Apply basic first aid This unit specifies the outcomes required to deal with the provision of essential
Main Activity Hazard Rating Hazard Controls CLW Policy/Procedure
Job Hazard Analysis Position: Employment Direct Support Professional Completed by: Health & Safety Committee Date: November 11, 2016 Main Activity Hazard Rating Hazard Controls CLW Policy/ Providing Support
Unit Title: Health and Safety in a Construction Environment
Unit Credit Value: 4 Unit Level: One Unit Guided Learning Hours: 40 Ofqual Unit Reference Number: K/505/1933 Unit Review Date: 30/04/2018 Unit Sector: 5.2 Building and Construction Unit Summary This unit
TA/GA Occupational Health and Safety
TA/GA Occupational Health and Safety Faculty of Engineering & Architecture Science (FEAS) Presented by: Eric Ambroise Lab Safety Officer Agenda Intro to Health & Safety Ryerson EH&S Policy Rights & Responsibilities
Main Activity Hazard Rating Hazard Controls CLW Policy/Procedure Providing support to People who have challenging needs
Job Hazard Analysis Position: Ventures Completed by: Health & Safety Committee Date: February 19, 2015 Main Activity Hazard Rating Hazard Controls CLW Policy/ Providing support to People who have challenging
Recognition, Evaluation, and Control of Hazards
Recognition, Evaluation, and Control of Hazards Latest revised date: October 26, 2011 Page 1 of 8 1.0 Introduction Memorial University has established a system for the recognition, evaluation, and control
A Health and Safety Tip Sheet for School Maintenance Staff. Did you know? Step 1. Identify job hazards. Step 2. Work towards solutions
INSPECTION Health and CHECKLIST Safety Committees MAINTAINING SAFETY: A Health and Safety Tip Sheet for School Maintenance Staff 1 Maintenance and facilities staff members keep schools operational, safe,
56th Annual Adopted October 10, 2017
56 th Annual Entry Fee Due Date January 31, 2019 No Late Entries Entry Fee $30.00 Includes a 5 day entry pass to the fair 2 Disclaimer: This flyer is by any means not a substitute for the Rules and Regulations.
55th Annual Adopted October 10, 2017
55 th Annual Entry Fee Due Date February 16, 2018 No Late Entries Entry Fee $15.00 Disclaimer: This flyer is by any means not a substitute for the Rules and Regulations. 2 TABLE OF CONTENTS BAKING/SEWING/CANNING
Hazardous Materials Management Guidelines
Environmental, Health and Safety Guidelines Hazardous Materials Management Guidelines Applicability These guidelines apply to facilities and activities involving the transportation, production, handling,
Operations: HSE. Health and Industrial Hygiene. Laboratory Safe Work Practice
Operations: HSE Health and Industrial Hygiene Laboratory Safe Work Practice Page 2 of 8 AMENDMENT RECORD Amendment Date Revision Number Revision Number 08/11/2016 4 Authority: Health Manager Custodian:
Iron Ore Company of Canada Health, Safety & Environment
Hazardous Materials 1 PURPOSE The entry of all substances onto site is controlled, Banned substances are not admitted, Potential health effects and hazards are identified and controlled, All products are
National 4-H Food Challenge Rules & Policies
National 4-H Food Challenge Rules & Policies Contest Eligibility: 1. A state/territory/district of Columbia is permitted to enter four teams into the National 4- H Food Challenge contest each year. 2.
2017 BAR & GRILLE RULES AND GUIDELINES
2017 BAR & GRILLE RULES AND GUIDELINES 1. There shall be a maximum of 22 teams. Each team can have 5 chefs total but are limited to only 3 cooking/grilling at any given time. Chefs must be identified 2
RISK ASSESSMENT FOR THE CHIMERA CLIMBING CENTRE DATE LAST UPDATED: 25 AUGUST STUART HOWARD
ASSESSMENT FOR THE CHIMERA CLIMBING CENTRE DATE LAST UPDATED: 2 AUGUST 201 - STUART HOWARD ASSESSMENT PROCESS: Likelihood of occurrence x Severity, L X S Likelihood of occurrence 1 Highly unlikely to ever
SECTION S COOKING AND PRESERVES
SECTION S COOKING AND PRESERVES Entries close 5.00pm Wednesday 25 th April 2018 Exhibits to be staged before 10.30am Friday 27 th April 2018 Exhibits to be removed after 6.30pm Saturday Or between 9.30am
29. Personal Protective Equipment
29. Personal Protective Equipment This Personal Protective Equipment (PPE) procedure has been prepared to inform employees of potential hazards in the workplace and to identify the proper PPE to be used
Omega Safety Training, Inc Hwy 6 North, Ste. 207 Houston, Texas Ph:
Omega Safety Training, Inc. 4654 Hwy 6 North, Ste. 207 Houston, Texas 77084 Ph: 281-979-4849 Email: Chad@omegasafetytraining.com Training Syllabus: P.E.C. 24 Hour Core Compliance SafeLand USA & SafeGulf
PERSONAL PROTECTIVE EQUIPMENT
0 PERSONAL PROTECTIVE EQUIPMENT Supplement to Standard Training Module TRAINING REQUIREMENTS OVERVIEW This standard Vivid training module provides a general overview of Personal Protective Equipment (PPE).
Handling Cleaning Chemicals Safely in the Work Place
Handling Cleaning Chemicals Safely in the Work Place We all use cleaning chemicals; both at work and at home. It is important that we all understand the potential risks, and where to find information,
Course outline: 111 WH&S E101A UEENEEE101A - Occupational Health and Safety regulations, codes and practices in the workplace
RTO Code 41319 Course outline: 111 WH&S E101A UEENEEE101A - Occupational Health and Safety regulations, codes and practices in the workplace Qualification: Applicable to: Unit of competency: Related policies:
Waste Industry Safety & Health
Waste Industry Safety & Health A practical pocket guide for the Waste industry Supported by: Delivering the Solution Together Introduction The Waste Industry Safety and Health (WISH) forum is supporting