A d v a n c e d G M A W ( M I G ) W e l d i n g P r o c e s s e s a n d P r o c e d u r e s ( 1 2 A )
|
|
|
- Tamsin Hoover
- 5 years ago
- Views:
Transcription
1 A d v a n c e d G M A W ( M I G ) W e l d i n g P r o c e s s e s a n d P r o c e d u r e s ( 1 2 A ) 40S/40E/40M A Welding Technology Course
2
3 A d v a n c e d G M A W ( M I G ) W e l d i n g P r o c e s s e s a n d P r o c e d u r e s ( 1 2 A ) 4 0 S / 4 0 E / 4 0 M Course Description This course is intended for students who are intending to pursue a career in welding. The emphasis is on hands-on advanced positional GMAW (MIG) welding procedures. Goal 1: Describe and apply health and safety practices. GLO 1.1: Demonstrate adherence to safe practices and procedures. SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A Demonstrate adherence to safe practices and procedures for facilities, processes, tools, and equipment. Identify safety and health requirements. (A1.1) Identify personal protective equipment (PPE) and PPE procedures. (A1.2) Identify electrical safety. (A1.3) Identify fire safety. (A1.4) Identify ergonomics. (A1.5) Identify hazard recognition and control. (A1.6) Describe the hazards of confined space entry. (A1.7) Identify first aid/cardiopulmonary resuscitation (CPR). (A1.8) Identify safety requirements as they apply to WHMIS. (A1.9) Describe the identification and control of specified hazards. (A1.10) Read, interpret, and communicate safety information (e.g., MSDS, etc.). Safely store and handle compressed gas tanks. Discuss hazards related to compressed gas. Demonstrate the safe use of compressed air. Demonstrate an understanding of and adherence to Safe Work Procedures Job Hazards Analysis documents for each piece of equipment that is used. Identify hazards and describe safe work practices pertaining to GMAW welding. (D6.2) 8487: Advanced GMAW (MIG) Welding Processes and Procedures (12A) 3
4 SLO 12A Demonstrate an understanding of the worker s responsibility to refuse unsafe work. GLO 1.2: Demonstrate knowledge of the Trade Safety Awareness Curriculum for Level 1 Apprentices. Goal 2: Demonstrate an understanding of metallurgy. GLO 2.1: Demonstrate an understanding of metallurgy as it applies to welding. SLO 12A SLO 12A Select appropriate filler materials to suit base metal. Demonstrate an understanding of various metals. Goal 3: Demonstrate the identification, operation, maintenance, and storage of equipment, materials, and consumable items. GLO 3.1: Demonstrate the identification and operation of equipment, materials, and consumable items. SLO 12A SLO 12A Demonstrate the safe and appropriate operation and handling of equipment, tools, materials, products, and consumable items used in advanced GMAW welding processes and procedures. Identify GMAW welding equipment, consumables, and accessories, and describe their applications. (D6.a.4) GLO 3.2: Demonstrate the safe and appropriate maintenance and storage of equipment, materials, and consumable items. SLO 12A SLO 12A Practise the cleaning, maintenance, and storage of GMAW equipment, tools, materials, products, and consumable items. Describe the requirements and describe the procedures to store consumables used for GMAW fillet welds on low carbon steel plate. (D6.a.5) GLO 3.3: Demonstrate an awareness of hoisting, lifting, and rigging procedures. GLO 3.4: Demonstrate an awareness of access equipment : Advanced GMAW (MIG) Welding Processes and Procedures (12A)
5 Goal 4: Demonstrate an understanding of welding processes and exhibit competence in those processes. GLO 4.1: Demonstrate pre-welding procedures. SLO 12A Prepare material and equipment for advanced GMAW welding. GLO 4.2: Demonstrate ability to weld. SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A Define terminology associated with FCAW welding. (D6.b.1) Perform GMAW, FCAW, and MCAW processes. Perform combined GMAW and FCAW welds on mild steel. Perform the procedures used to perform fillet and groove welds using the MCAW process. (D6.e.6) Identify the modes of transfer relating to GMAW welding, and describe their characteristics and applications. (D6.7) Describe the procedures used to perform fillet welds on low carbon steel plate in all positions using the GMAW process. (D6.a.6) Perform fillet welds on low carbon steel plate in all positions. (D6.a.8) GLO 4.3: Perform post-welding procedures. SLO 12A Perform post-welding procedures for advanced GMAW welding. GLO 4.4: Inspect and troubleshoot welding projects. SLO 12A SLO 12A Inspect and troubleshoot advanced GMAW welds. Describe the procedures used to prevent and correct weld faults. (D6.a.7) GLO 4.5: Perform cutting and gouging. GLO 4.6: Perform the Manitoba Welder Practical Examinations. 8487: Advanced GMAW (MIG) Welding Processes and Procedures (12A) 5
6 Goal 5: Demonstrate an understanding of metal design and fabrication. GLO 5.1: Design metal projects. SLO 12A Interpret information pertaining to GMAW fillet welds found on drawings and specifications. (D6.a.2) GLO 5.2: Fabricate metal projects. SLO 12A Cut, prep, and tack the five basic weld joints. Goal 6: Describe and apply the transferable cross-curricular knowledge and skills. GLO 6.1: Apply knowledge and skills from the language arts. SLO 12A Define terminology associated with GMAW fillet welds. (D6.a.1) GLO 6.2: Demonstrate the mathematics skills related to welding. SLO 12A SLO 12A Solve problems involving percentage and ratios. (B3.3) Solve problems involving geometric formulas. (B3.5) GLO 6.3: Demonstrate knowledge of other subject areas. SLO 12A SLO 12A Demonstrate an awareness of the use of information and communication technology in creating electronic portfolios and searching for employment. Read, interpret, and communicate welding symbols. Goal 7: Follow the ethical and legal standards that pertain to the welding industry. GLO 7.1: Demonstrate an awareness of the ethical and legal expectations of welders. SLO 12A Demonstrate an understanding of the history of welding certification as it relates to safety in the welding industry. Goal 8: Demonstrate employability skills. GLO 8.1: Demonstrate employability skills. SLO 12A SLO 12A Demonstrate problem-solving skills. Demonstrate critical thinking skills : Advanced GMAW (MIG) Welding Processes and Procedures (12A)
7 SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A Demonstrate regular attendance and punctuality. Demonstrate accountability for their actions. Demonstrate adaptability, initiative, and effort. Demonstrate the ability to accept and follow direction and feedback. Demonstrate teamwork skills. Demonstrate the ability to stay on task and effectively use time in class and shop environments. Demonstrate the ability to communicate respectively and effectively with teachers and students. Goal 9: Demonstrate an awareness of sustainability as it pertains to the welding industry. GLO 9.1: Describe the impact of human sustainability on the health and well-being of welders. SLO 12A SLO 12A Demonstrate an awareness of the long-term health concerns related to welding different types of materials, such as stainless galvanized steels. Research safety concerns related to different types of filler materials. GLO 9.2: Describe the welding industry s sustainability practices and impact on the environment. SLO 12A Demonstrate an awareness of the impact of welding work sites on the environment. GLO 9.3: Describe the sustainable business practices within the welding industry. Goal 10: Demonstrate an understanding of the structure and scope of welding. GLO 10.1: Describe the scope of welding. SLO 12A Demonstrate an awareness of the scope of GMAW (MIG) welding. GLO 10.2: Describe apprenticeship, post-secondary, and employment opportunities. 8487: Advanced GMAW (MIG) Welding Processes and Procedures (12A) 7
8 Goal 11: Demonstrate an understanding of the evolution, technological progression, and emerging trends in welding. GLO 11.1: Demonstrate an understanding of the evolution, technological progression, and emerging trends in welding. SLO 12A SLO 12A Demonstrate an awareness of PULSE welding. Demonstrate an understanding of the use of lasers for cutting and welding : Advanced GMAW (MIG) Welding Processes and Procedures (12A)
B a s i c G M A W ( M I G ) P r o c e d u r e s ( 1 1 B )
8 4 7 4 B a s i c G M A W ( M I G ) P r o c e d u r e s ( 1 1 B ) 30S/30E/30M A Welding Technology Course 8 4 7 4 B a s i c G M A W ( M I G ) P r o c e d u r e s ( 1 1 B ) 3 0 S / 3 0 E / 3 0 M Course
B a s i c S M A W ( A R C ) P r o c e d u r e s ( 1 1 C )
8 4 8 6 B a s i c S M A W ( A R C ) P r o c e d u r e s ( 1 1 C ) 30S/30E/30M A Welding Technology Course 8 4 8 6 B a s i c S M A W ( A R C ) P r o c e d u r e s ( 1 1 C ) 3 0 S / 3 0 E / 3 0 M Course
M e t a l D e s i g n / F a b r i c a t i o n & O x y - A c e t y l e n e P r o c e d u r e s ( 1 1 A )
8 4 1 4 M e t a l D e s i g n / F a b r i c a t i o n & O x y - A c e t y l e n e P r o c e d u r e s ( 1 1 A ) 30S/30E/30M A Welding Technology Course 8 4 1 4 M e t a l D e s i g n / F a b r i c a t
I n t r o d u c t I o n t o c o l l I s I o n r e p a I r a n d r e f I n I s h I n g t e c h n o l o g y ( 1 0 )
9 0 2 9 I n t r o d u c t I o n t o c o l l I s I o n r e p a I r a n d r e f I n I s h I n g t e c h n o l o g y ( 1 0 ) 20S/20E/20M A Collision Repair and Refinishing Technology Course 9 0 2 9 : I n
M i l l i n g O p e r a t i o n s I ( 1 1 C )
8 8 5 4 M i l l i n g O p e r a t i o n s I ( 1 1 C ) 30S/30E/30M A Machining Technology Course 8 8 5 4 : M i l l i n g O p e r a t i o n s I ( 1 1 C ) 3 0 S / 3 0 E / 3 0 M Course Description Students
C N C M a c h i n i n g ( 1 2 D )
8 8 5 8 C N C M a c h i n i n g ( 1 2 D ) 40S/40E/40M A Machining Technology Course 8 8 5 8 : C N C M a c h i n i n g ( 1 2 D ) 4 0 S / 4 0 E / 4 0 M Course Description Students develop skills and knowledge
A u t o m o t i v e m e t A l s A n d W e l d i n g ( 1 1 B )
9 0 3 1 A u t o m o t i v e m e t A l s A n d W e l d i n g ( 1 1 B ) 30S/30E/30M A Collision Repair and Refinishing Technology Course 9 0 3 1 : A u t o m o t i v e m e t A l s A n d W e l d i n g ( 1
A p p l i e d C a r p e n t r y ( 1 2 D )
9 1 9 4 A p p l i e d C a r p e n t r y ( 1 2 D ) 40S/40E/40M A Carpentry Course 9 1 9 4 A p p l i e d C a r p e n t r y ( 1 2 D ) 4 0 S / 4 0 E / 4 0 M Course Description In this course, students will
W e l d - O n a n d B O l t - O n P a n e l R e P l a c e m e n t ( 1 2 B )
9 0 3 4 W e l d - O n a n d B O l t - O n P a n e l R e P l a c e m e n t ( 1 2 B ) 40S/40E/40M A Collision Repair and Refinishing Technology Course 9 0 3 4 : W e l d - O n a n d B O l t - O n P a n e
D a m a g e a n a l y s i s a n D s t r u c t u r a l r e p a i r s ( 1 2 a )
9 0 3 3 D a m a g e a n a l y s i s a n D s t r u c t u r a l r e p a i r s ( 1 2 a ) 40S/40E/40M A Collision Repair and Refinishing Technology Course 9 0 3 3 : D a m a g e a n a l y s i s a n D s t r
A u t o m o t i v e E l e c t r i c a l S y s t e m s ( 1 2 A )
8 7 0 0 A u t o m o t i v e E l e c t r i c a l S y s t e m s ( 1 2 A ) 40S/40E/40M An Automotive Technology Course 8 7 0 0 : A u t o m o t i v e E l e c t r i c a l S y s t e m s ( 1 2 A ) 4 0 S / 4
I n t r o d u c t i o n t o H e a v y D u t y E q u i p m e n t T e c h n o l o g y ( 1 0 )
8 6 7 3 I n t r o d u c t i o n t o H e a v y D u t y E q u i p m e n t T e c h n o l o g y ( 1 0 ) 20S/20E/20M A Heavy Duty Equipment Technician Course 8 6 7 3 : I n t r o d u c t i o n t o H e a v y
A p p l i e d H e a v y D u t y E q u i p m e n t T e c h n o l o g y ( 1 2 D )
8 7 0 4 A p p l i e d H e a v y D u t y E q u i p m e n t T e c h n o l o g y ( 1 2 D ) 40S/40E/40M A Heavy Duty Equipment Technician Course 8 7 0 4 : A p p l i e d H e a v y D u t y E q u i p m e n t
F u n d a m e n t a l s o f G r a p h i c D e s i g n
9 1 3 6 F u n d a m e n t a l s o f G r a p h i c D e s i g n 20S/20E/20M A Graphic Design Course 9 1 3 6 : F u n d a m e n t a l s o f G r a p h i c D e s i g n 2 0 S / 2 0 E / 2 0 M Course Description
V e g e t a b l e s, F u n g i, S t a r c h e s, a n d F a r i n a c e o u s P r o d u c t s ( 1 1 C )
8 7 9 4 V e g e t a b l e s, F u n g i, S t a r c h e s, a n d F a r i n a c e o u s P r o d u c t s ( 1 1 C ) 30S/30E/30M A Culinary Arts Course 8 7 9 4 : V e g e t a b l e s, F u n g i, S t a r c h
I n t e r m e d i a t e H a i r c u t t i n g ( 1 1 A ) 30S/30E/30M. a n d B a r b e r i n g T e c h n i q u e s. A Hairstyling Course
8 3 1 6 I n t e r m e d i a t e H a i r c u t t i n g a n d B a r b e r i n g T e c h n i q u e s ( 1 1 A ) 30S/30E/30M A Hairstyling Course 8 3 1 6 : I n t e r m e d i a t e H a i r c u t t i n g a n
C o d i n g f o r i n t e r a C t i v e d i g i t a l M e d i a
9 0 9 7 C o d i n g f o r i n t e r a C t i v e d i g i t a l M e d i a 30S/30E/30M An Interactive Digital Media Course 9 0 9 7 : C o d i n g f o r i n t e r a C t i v e d i g i t a l M e d i a 3 0 S
K n i t w e a r D e s i g n a n d C o n s t r u c t i o n ( 1 1 A )
9 1 2 6 K n i t w e a r D e s i g n a n d C o n s t r u c t i o n ( 1 1 A ) 30S/30E/30M A Fashion Design and Technology Course 9 1 2 6 : K n i t w e a r D e s i g n a n d C o n s t r u c t i o n 3 0 S
B a s i c H a i r c u t t i n g a n d T h e r m a l S t y l i n g ( 1 0 C )
8 3 1 4 B a s i c H a i r c u t t i n g a n d T h e r m a l S t y l i n g ( 1 0 C ) 20S/20E/20M A Hairstyling Course 8 3 1 4 : B a s i c H a i r c u t t i n g a n d T h e r m a l S t y l i n g ( 1 0 C
B r e a k f a s t a n d D a i r y ( 1 2 B )
8 7 9 6 B r e a k f a s t a n d D a i r y ( 1 2 B ) 40S/40E/40M A Culinary Arts Course 8 7 9 6 : B r e a k f a s t a n d D a i r y ( 1 2 B ) 4 0 S / 4 0 E / 4 0 M Course Description This course is intended
F o r m a l W e a r D e s i g n a n d C o n s t r u c t i o n ( 1 2 B )
9 1 3 1 F o r m a l W e a r D e s i g n a n d C o n s t r u c t i o n ( 1 2 B ) 40S/40E/40M A Fashion Design and Technology Course 9 1 3 1 : F o r m a l W e a r D e s i g n a n d C o n s t r u c t i o
P a t i s s e r i e a n d B a k i n g ( 1 1 B )
8 7 9 3 P a t i s s e r i e a n d B a k i n g ( 1 1 B ) 30S/30E/30M A Culinary Arts Course 8 7 9 3 : P a t i s s e r i e a n d B a k i n g ( 1 1 B ) 3 0 S / 3 0 E / 3 0 M Course Description This course
E x p l o r a t i o n o f J e w e l l e r y / M e t a l s m i t h i n g ( 9 )
8 7 6 8 E x p l o r a t i o n o f J e w e l l e r y / M e t a l s m i t h i n g ( 9 ) 15S/15E/15M 10S/10E/10M A Jewellery/Metalsmithing Course 8 7 6 8 : E x p l o r a t i o n o f J e w e l l e r y / M
CURRICULUM ASSESSMENT CHECKLIST: MOTOR VEHICLE BODY REPAIRER - LEVEL 1
CURRICULUM ASSESSMENT CHECKLIST: MOTOR VEHICLE BODY REPAIRER - LEVEL 1 Apprenticeship Manitoba prescribes time and content specific curriculum standards for technical training in the trade of Motor Vehicle
P r o j e c t M a n a g e M e n t f o r I n t e r a c t I v e D I g I t a l M e D I a
9 1 0 0 P r o j e c t M a n a g e M e n t f o r I n t e r a c t I v e D I g I t a l M e D I a 40S/40E/40M An Interactive Digital Media Course 9 1 0 0 : P r o j e c t M a n a g e M e n t f o r I n t e
G r a d e 1 2 D A d v a n c e d M i l l w o r k
G r a d e 1 2 D A d v a n c e d M i l l w o r k G r a d e 1 2 D : A d v a n c e d M i l l w o r k Course Description Carpentry 12D: Advanced Millwork is intended for students transitioning from the carpentry
R e l a t e d S a l o n S e r v i c e s ( 1 0 D )
8 3 1 5 R e l a t e d S a l o n S e r v i c e s ( 1 0 D ) 20S/20E/20M A Hairstyling Course 8 3 1 5 : R e l a t e d S a l o n S e r v i c e s ( 1 0 D ) 2 0 S / 2 0 E / 2 0 M Course Description Curriculum
A i r c r a f t E l e c t r i c a l S y s t e m s ( 1 2 B )
8 5 4 9 A i r c r a f t E l e c t r i c a l S y s t e m s ( 1 2 B ) 40S/40E/40M An Aviation and Aerospace Technologies Course 8 5 4 9 : A i r c r a f t E l e c t r i c a l S y s t e m s ( 1 2 B ) 4 0
M o d e r n a n d C l a s s i c D e s s e r t s, a n d P l a t i n g T e c h n i q u e s ( 1 2 B )
8 3 7 4 M o d e r n a n d C l a s s i c D e s s e r t s, a n d P l a t i n g T e c h n i q u e s ( 1 2 B ) 40S/40E/40M A Baking and Pastry Arts Course 8 3 7 4 : M o d e r n a n d C l a s s i c D e s s
Grades 9 to 12 Heavy Duty Equipment Technician. Manitoba Technical-Vocational Curriculum Framework of Outcomes
Grades 9 to 12 Heavy Duty Equipment Technician Manitoba Technical-Vocational Curriculum Framework of Outcomes G r a d e s 9 t o 1 2 H e a v y D u t y E q u i p m e n t T e c h n i c i a n Manitoba Technical-Vocational
S p a S e r v i c e s ( 1 2 D )
9 0 7 8 S p a S e r v i c e s ( 1 2 D ) 40S/40E/40M An Esthetics Course 9 0 7 8 : S p a S e r v i c e s (1 2 D) 4 0 S / 4 0 E / 4 0 M Course Description The emphasis in this course is on aromatherapy,
E x p l o r a t i o n o f B a k i n g a n d P a s t r y A r t s ( 9 )
8 2 3 1 E x p l o r a t i o n o f B a k i n g a n d P a s t r y A r t s ( 9 ) 15S/15E/15M 10S/10E/10M A Baking and Pastry Arts Course 8 2 3 1: E x p l o r a t i o n o f B a k i n g a n d P a s t r y A
Y e a s t - D o u g h P r o d u c t s ( 1 1 B )
8 3 3 9 Y e a s t - D o u g h P r o d u c t s ( 1 1 B ) 30S/30E/30M A Baking and Pastry Arts Course 8 3 3 9 : Y e a s t - D o u g h P r o d u c t s ( 1 1 B ) 3 0 S / 3 0 E / 3 0 M Course Description This
C a k e s, F i l l i n g s, I c i n g s,
8 3 5 8 C a k e s, F i l l i n g s, I c i n g s, a n d D e c o r a t i o n s ( 1 1 C ) 30S/30E/30M A Baking and Pastry Arts Course 8 3 5 8 : C a k e s, F i l l i n g s, I c i n g s, a n d D e c o r a
SEMFWE305 HY20 04 Welding materials by the Semi-Automatic MIG/MAG and Flux Cored Arc processes
SEMFWE305 HY20 04 Welding materials by the Semi-Automatic MIG/MAG and Flux Cored Overview This standard identifies the competencies you need to prepare and operate semi-automatic MIG, MAG and flux cored
Motor Vehicle Body Repairer (Metal and Paint) Level 1
Level 1 A1 Orientation I: The Structure & Scope of Trade Learning Duration: 7 hours 7 hours 0 hours Jobsite learning and teaching have long been fundamental to trade-practice, including its safety, health,
Motor Vehicle Body Repairer (Metal and Paint)
Interprovincial Program Guide Motor Vehicle Body Repairer (Metal and Paint) Nova Scotia Curriculum Standard Based on the Interprovincial Program Guide New Levels 1, 2, 3 & 4 in September 2018 (pg. 9 for
Contest Guide STUDENTS ARE NOT PERMITTED TO BRING ANY TEMPLATES.
Welding Fabrication (WF) Manufacturing Skilled and Technical Sciences Contests Contest Guide Please review the following guidelines for the Illinois state competition that will be held on Friday, April
OHSISA TRAINING COURSE FOR WHO? DETAILS & INFORMATION
The OHS Institute of South Africa offers a full range of consulting services pertaining to Safety, Health, Environment, Risk, and Quality (SHERQ) for all sectors of industry. This includes a full range
Effective September 1, HOURS REQUIRED ANNUALLY
The Master Agreement (2017 2026) for the Plumbing and Piping Industry of Southern California between California Plumbing and Mechanical Contractors Association and Southern California Pipe Trades District
SEMFWE3-33 SQA Unit Code HF2X 04 Cutting and shaping materials using portable thermal cutting equipment
Cutting and shaping materials using portable thermal cutting equipment Overview This standard identifies the competencies you need for cutting and shaping plate (3mm thickness and above), rolled sections,
NOVA SCOTIA APPRENTICESHIP CURRICULUM STANDARD
NOVA SCOTIA APPRENTICESHIP CURRICULUM STANDARD Based on the CCDA for the Occupation Harmonization of Recommendations and the Interprovincial Program Guide Level 1 in September 2017 (pg. 12 for Program
SEMME269 - SQA Unit Code H2BK 04 Cutting and shaping using NC/CNC plasma or gas cutting machines
Cutting and shaping using NC/CNC plasma or gas cutting machines Overview This unit identifies the competences you need to carry out cutting and shaping operations using numerical control (NC) or computer
SEMFWE SQA Unit Code H1W9 04 Forming platework using power rolling machines
Overview This standard identifies the competencies you need to bend and form plate for fabrications in accordance with approved procedures using power operated pinch or pyramid rolls which may be hand
7 Hazard assessment 8 Worker participation 9 Hazard elimination and control
This document is a guideline only. Employers have a responsibility of assessing all applicable occupational health and safety legislation, for the tasks they are performing. Businesses in this industry
Overview IMIARBBP21. Carry Out Motor Vehicle Body Metal Inert Gas (MIG) Brazing Operations
Overview This standard is about joining materials correctly and effectively using Metal Inert Gas (MIG) Brazing techniques and procedures. 1 Performance criteria You must be able to: 1. use the appropriate
P h o t o g r a p h i c L i g h t i n g ( 1 1 B )
9 1 5 9 P h o t o g r a p h i c L i g h t i g ( 1 1 B ) 30S/30E/30M A Photography Course 9 1 5 9 : P h o t o g r a p h i c L i g h t i g ( 1 1 B ) 3 0 S / 3 0 E / 3 0 M Course Descriptio This course focuses
Erie County Technical School Metal Fabrication Duty/Task List
1of 5 Content Areas, Titles and Task Statements 00 FUNDAMENTALS A FOUNDATIONS OF METAL FABRICATION MTF101 A001 Identify the goals and objectives of the Metal Fabrication Program MTF101 1.1 N/A 1.5.5.D
C l o t h i n g a n d T e x t i l e s ( 7 ) A Middle Years Human Ecology Course
0 4 8 6 C l o t h i n g a n d T e x t i l e s ( 7 ) A Middle Years Human Ecology Course Human Ecology Clothing & Clothing & Textiles Family Family Studies Studies the progression of Home Economics & Food
owner profit salary workplace
Chapter 7 Welding Shop Practices OBJECTIVES After completing this chapter, the student should be able to: Discuss job skills that will help ensure that a welder will be a more valuable employee. Explain
DURATION: 5 days. CLASS RATIO: 1 Trainer 10 candidates.
WELDING PROGRAMMES METAL INERT GAS (MIG) WELDING METAL ACTIVE GAS (MAG) WELDING MANUAL METAL ARC WELDING OXY-ACETYLENE WELDING AND CUTTING TARGET: This training is recommended for people who are seeking
SITE SAFETY PLAN AND NEW EMPLOYEE SAFETY ORIENTATION LOCATION: BROWN-MINNEAPOLIS TANK-SOUTHWEST (ALBUQUERQUE FABRICATION PLANT) REVISED:
SITE SAFETY PLAN AND NEW EMPLOYEE SAFETY ORIENTATION LOCATION: BROWN-MINNEAPOLIS TANK-SOUTHWEST (ALBUQUERQUE FABRICATION PLANT) REVISED: 09-11-2009 The following summarizes the orientation requirements
Cutting and shaping materials using thermal cutting equipment
Unit 824 Cutting and shaping materials using thermal cutting equipment UAN: H/600/5883 Level: Level 2 Credit value: 14 GLH: 64 Relationship to NOS: This unit has been derived from national occupational
3 Acetylene. Acetylene. The fuel gas of choice
3 The fuel gas of choice 02 03 Consult the experts. Finding the fuel gas that works best for you. High speed, lower costs. Profit from the many benefits of acetylene. Your choice of fuel gas is fundamental
Industrial Rope Access
Industrial Rope Access About Tai Poutini Polytechnic 1 Pathways 2 Programmes Certificate in Industrial Rope Access (Elementary) Level 3 2 Certificate in Industrial Rope Access (Working on Ropes) Level
Steamfitter/Pipefitter
Steamfitter/Pipefitter 2015 STEAMFITTER/PIPEFITTER RED SEAL OCCUPATIONAL STANDARD 1 Red Seal Occupational Standard - Steamfitter/Pipefitter - 2015 You can download this publication by going online: publicentre.esdc.gc.ca
C l o t h i n g a n d T e x t i l e s ( 8 ) A Middle Years Human Ecology Course
0 4 8 6 C l o t h i n g a n d T e x t i l e s ( 8 ) A Middle Years Human Ecology Course Human Ecology Clothing & Clothing & Textiles Family Family Studies Studies the progression of Home Economics & Food
BODY OF KNOWLEDGE API-510 PRESSURE VESSEL INSPECTOR CERTIFICATION EXAMINATION
BODY OF KNOWLEDGE API-510 PRESSURE VESSEL INSPECTOR CERTIFICATION EXAMINATION May and September, 2017 and January 2018 (Replaces May 2016) API Authorized Pressure Vessel Inspectors must have a broad knowledge
BSO Plus ANNUAL SAFETY REFRESHER 2015
The BSO Plus Safety Refresher is an annual checkpoint designed from the content in BSO Plus. Completing this refresher is a requirement for the Basic Safety Recertification (BSR) course, so please ensure
National Wireless Training Standard
Skills Based Training Subcommittee In Collaboration with Wireless Industry Safety Task Force and National Association of Tower Erectors (NATE) 2014 Contents Contents Definition of Job Classifications...1
SITE SAFETY PLAN AND NEW EMPLOYEE SAFETY ORIENTATION
SITE SAFETY PLAN AND NEW EMPLOYEE SAFETY ORIENTATION LOCATION: TSMF REVISED: 09-11-09 The following summarizes the orientation requirements for new employees at the facility. This plan augments the company
Description. Lesson Outcomes. Assumptions. Terminology. Welding. Automotive
Description Oxyacetylene or fusion welding is one of the oldest methods of joining metal. Oxyacetylene welding equipment is very common in an automotive shop and has many uses. It is most often used to
Welding & Cutting Written Program
Welding & Cutting Written Program The University Of Iowa Environmental Health & Safety 122 Grand Avenue Court Iowa City, IA 52242-1000 Phone: 319-335-8501 Date Revised/Reviewed: 5/30/2018 Table of Contents
SPECIALIZED ONLINE TRAINING COURSE LIST
SPECIALIZED ONLINE TRAINING COURSE LIST Grainger Online Safety Manager provides you with access to online training courses covering today's most relevant safety topics. The training content is designed
SEMFEW205 - SQA Unit Code H1VP 04 Joining materials by the manual MIG/MAG and other continuous wire processes
Joining materials by the manual MIG/MAG and other continuous wire Overview This unit identifies the competencies you need to prepare and operate manual MIG, MAG or cored-wire arc welding equipment, in
LiftAlloy Chain Slings
CHAIN SLING BASICS Slings Lift-All chain slings meet or exceed all OSHA, ASME B30.9 and NACM standards and regulations. chain slings, available in 80 for 7/8"- /4" and 00 for 7/32"-3/4", are recommended
Abdullah Fahad Alhuzaim
Summary Jubail Industrial City. KSA +966-50-433-4699 a.alhuzaim@hotmail.com Work Experience Abdullah Fahad Alhuzaim Profile: Male, 34 Nationality: Saudi Current Location: Jubail Industrial City, KSA Current
Z5160 Load adapter Mounting instructions (1.2 EN)
Z560 Load adapter Mounting instructions (. EN) WARNING! CAUTION! IMPORTANT! Note: References in the manual This refers to a potentially dangerous situation which may lead to personal injury. This refers
Installing, Repairing or Modifying Construction Resources by Heating, Welding, Brazing, Soldering and Thermal Cutting in the Workplace L/505/0144
Unit Title Ofqual unit reference number (code) Organisation Reference QCF 665 Unit Level Unit Sub Level Installing, Repairing or Modifying Construction Resources by Heating, Welding, Brazing, Soldering
University of Vermont Department of Physical Plant Personal Protective Equipment Program
University of Vermont Department of Physical Plant Personal Protective Equipment Program REVISED AND DISTRIBUTED BY: THE UNIVERSITY OF VERMONT DEPARTMENT OF PHYSICAL PLANT TRAINING AND COMPLIANCE OFFICE
New Hire Safety Orientation. Welcome to Flexicrew, our number one priority is you and your safety.
New Hire Safety Orientation Welcome to Flexicrew, our number one priority is you and your safety. 1 New Employee Responsibilities As a contract worker with Flexicrew Staffing, I understand by signing this
American Welding Society Accredited Test Facility Certification Candidate Orientation
American Welding Society Accredited Test Facility Certification Candidate Orientation 609 Vocational Parkway, West Monroe, LA 71292 Tel: (318) 397-6173 / Fax: (318) 397-6106 / ladelta.edu/workforce The
Practical Skills/Experience Sign-Off Document. Inflatable Mechanics (Under Ontario Regulation 187/03, Technical Standards and Safety Act, 2000)
Practical Skills/Experience Sign-ff Document with respect to: Inflatable Mechanics (Under ntario Regulation 187/03, Technical Standards and Safety Act, 2000) Document Uncontrolled if Printed Mechanic-In-Training
CONTEST DESCRIPTION / DESCRIPTION DE CONCOURS SHEET METAL WORK TÔLERIE POST- SECONDARY / NIVEAUX POSTSECONDAIRE
CONTEST DESCRIPTION / DESCRIPTION DE CONCOURS SHEET METAL WORK TÔLERIE POST- SECONDARY / NIVEAUX POSTSECONDAIRE Table of Contents 1 THE ESSENTIAL SKILLS FOR CAREERS IN THE SKILLED TRADES AND TECHNOLOGY...
Commercial Diving & Marine Services CAPABILITY STATEMENT.
Commercial Diving & Marine Services CAPABILITY STATEMENT www.gilbertdiving.com Company Overview Since 1988 Gilbert Diving has been providing highly professional commercial diving and marine services for
JOB READY ASSESSMENT BLUEPRINT COLLISION REPAIR AND REFINISHING TECHNOLOGY - PILOT. Test Code: 3283 Version: 01
JOB READY ASSESSMENT BLUEPRINT COLLISION REPAIR AND REFINISHING TECHNOLOGY - PILOT Test Code: 3283 Version: 01 Specific competencies and skills tested in this assessment: Safety Demonstrate knowledge of
Contractor/Visitor Safety Orientation UNBC
Contractor/Visitor Safety Orientation UNBC 3333 University Way, Prince George, BC V2N 4Z9 Revised: October 2015 For All Emergencies call Security 250-960-7058 ***DO NOT DIAL 911*** Important UNBC Telephone
T e l N o : F a x N o : E m a i l : a i s h c m c - m e. c o m w w w. c m c - m e.
MU047: Practical Valve Technology: Selection, Installation, Upgrading, Inspection & Troubleshooting MU047 Rev.002 CMCT COURSE OUTLINE Page 1 of 7 Training Description: This five-day intensive course covers
NATIONAL CERTIFICATE (VOCATIONAL) WORKSHOP PRACTICE NQF LEVEL 2 SUPPLEMENTARY EXAMINATION 2010
NATIONAL CERTIFICATE (VOCATIONAL) WORKSHOP PRACTICE NQF LEVEL 2 SUPPLEMENTARY EXAMINATION 2010 (12041012) 17 March (X-Paper) 09:00 12:00 This question paper consists of 6 pages. (12041012) -2- NC2150(E)(M17)V
TECHALLOY NICKEL ALLOYS COMPLETE APPLICATION SOLUTIONS
TECHALLOY NICKEL ALLOYS COMPLETE APPLICATION SOLUTIONS Lincoln Electric QUALITY + Techalloy EXPERTISE ð Your EXPECTATIONS EXCEEDED One More Variable We ve Solved For You... In 2011, Lincoln Electric acquired
Collision Repair Shop Inspection Checklist
Collision Repair Shop Inspection Checklist Note: This is a sample inspection chesklist only, and may mot include all appropriate inspection items. The Occupational Health and Safety Regulation specifies
SAFETY POLICY AND PROCEDURE MANUAL QUESTIONNAIRE
The following questionnaire is designed to aid us in the creation of your policy and procedure manual. Please place a checkmark in the boxes that correspond to the sections that you would like to be included
Module: Permit to work System
Module: Permit to work System Aim: To know about best practice of PTW. It is a procedure designed to ensure that work is carried out in the safest possible way by considering the potential hazards and
Course outline: 111 WH&S E101A UEENEEE101A - Occupational Health and Safety regulations, codes and practices in the workplace
RTO Code 41319 Course outline: 111 WH&S E101A UEENEEE101A - Occupational Health and Safety regulations, codes and practices in the workplace Qualification: Applicable to: Unit of competency: Related policies:
API-510 PRESSURE VESSEL INSPECTOR
BODY OF KNOWLEDGE API-510 PRESSURE VESSEL INSPECTOR CERTIFICATION EXAMINATION July 2013 (Replaces July 2012) API Authorized Pressure Vessel Inspectors must have a broad knowledge base relating to maintenance,
Accident/Illness Prevention: 6 Keys
Accident/Illness Prevention: 6 Keys 1. Identification of hazards This is the foundation for our Accident Prevention Program. The boxes we have checked in the chart below, "Typical Work Site Hazards or
Technical Operating Instructions for Magnum Cutting Systems. for online instructions
Technical Operating Instructions for Magnum Cutting Systems http://www.magnumusa.com/operating-video.html for online instructions In Case of Emergency Immediately Call for Medical Aid. Familiarize yourself
Industrial Mechanic (Millwright)
Industrial Mechanic (Millwright) 2017 RED SEAL OCCUPATIONAL STANDARD INDUSTRIAL MECHANIC (MILLWRIGHT) You can download this publication by going online: publicentre.esdc.gc.ca This document is available
Return the completed questionnaire, OSHA 300A Summary form and EMR Rating via e- mail.
EHS CONTRACTOR SAFETY It is the Mission of Olin Brass to Create an environment of safety excellence where an injuryfree work place is achieved through continuously confronting and correcting unsafe conditions
Take the high road to ensure underground safety.
Take the high road to ensure underground safety. UnitedRentals.com 800.UR.RENTS 2017 United Rentals, Inc. 2 Trench Safety Power Trench & Safety HVAC 3 Excavations often cost more and take longer than needed.
Screw Gas Compressors & Dry Gas Seals Applications. Singapore, Mandarin Orchard Singapore. Training Course : Training Course For One Week In
Training Course : Screw Gas Compressors & Dry Gas Seals Applications Training Course For One Week In Singapore, Mandarin Orchard Singapore Which Be Held As Under Details : Tel. : 00965 22610021 99600277,
UNIT TITLE: CLEAN PUBLIC AREAS, FACILITIES AND EQUIPMENT NOMINAL HOURS: 60 hours
UNIT TITLE: CLEAN PUBLIC AREAS, FACILITIES AND EQUIPMENT NOMINAL HOURS: 60 hours UNIT NUMBER: D1.HHK.CL3.02 UNIT DESCRIPTOR: This unit deals with skills and knowledge required to clean public areas, facilities
B S Glass Ltd Safety procedures- outsourced Workplaces
B S Glass Ltd Jan 17 B S Glass Ltd Safety procedures- outsourced Workplaces Index - - - - - - - - Page No On Site safety - - - - - - - - - - - - - - - - - - - Content 3. 1.00 Health and Safety Mission
BSO Plus ANNUAL SAFETY REFRESHER 2018
The BSO Plus Safety Refresher is an annual checkpoint designed from BSO Plus content. Completing this refresher is a requirement for the Basic Safety Recertification (BSR) course, so please ensure you
API 510: Pressure Vessel Inspection Code (API Exam Preparation Training)
An Intensive 2-Week Training Course API 510: Pressure Vessel Inspection Code (API Exam Preparation Training) Maintenance, Inspection, Rating, Repair and Alteration 11-22 Aug 2019, Dubai 07-MAY-18 This
Environmental Health and Safety 2018 Catalog CONTENT :: COMPLIANCE :: TECHNOLOGY
Environmental Health and Safety 2018 Catalog CONTENT :: COMPLIANCE :: TECHNOLOGY 2018 360training.com 888-360-TRNG (8764) www.360training.com About 360training.com 360training.com is a privately held,
Level 2 NVQ Diploma in Fabrication and Welding ( ) August 2017 Version 1.1
QUALIFICATION HANDBOOK Level 2 NVQ Diploma in Fabrication and Welding (1782-20) August 2017 Version 1.1 Qualification at a glance Subject area City & Guilds number 1782 Age group approved 16+ Entry requirements
SAFETY AND OSHA GUIDELINE CURRICULUM
SAFETY AND OSHA GUIDELINE CURRICULUM CertiLearn - Non-Industrial OSHA Safety Guidelines These courses are ideal for any small business or non-industrial environment Safety Basics In this course you will
WLDG 2447 ADVANCED GAS METAL ARC WELD (MIG)
SYLLABUS WLDG 2447 ADVANCED GAS METAL ARC WELD (MIG) WELDING BRAZOSPORT COLLEGE LAKE JACKSON TEXAS PREPARED BY: Jay Barr DATE: August 25, 2016 INSTRUCTOR RECOMMENDED BY: DATE: DIVISION CHAIRMAN RECOMMENDED
61-31 Corrugated Radiators
ISO-9001 Certified Catalog Section 61-31 Corrugated Radiators INTRODUCTION Howard corrugated radiators are specifically designed for original equipment manufacturers and apparatus repair shops engaged