Ecoflex pre-insulated pipe energy efficiency made easy
|
|
- Moris Miller
- 6 years ago
- Views:
Transcription
1 E c o f l e x C o m p l e t e Catalog Supplement June 2010 Hydronic heating, cooling and potable-water distribution Fast, easy installations Energy-efficient Flexible, durable Custom-cut, long lengths Virtually maintenance-free Ecoflex pre-insulated pipe energy efficiency made easy
2 Pre-insulated Pipe Systems Pre-insulated pipe systems... more than a pipe, a solution Pre-insulated pipe systems The Distribution Solution For hydronic heating, cooling and potable-water applications A Quality System Uponor s pre-insulated pipe systems offer flexible, plastic distribution piping for a variety of hydronic heating, cooling and potable-water applications. Service pipes are made from either durable Engel-method crosslinked polyethylene (PEX-a) or high-density polyethylene (HDPE) protected by multi-layer, closed-cell, PEX-foam insulation and covered by a waterproof, corrugated HDPE jacket. Lightweight and flexible, pre-insulated pipes install easily and quickly even over obstacles and around corners. Superior Performance A proven product with more than 90 million feet of pipe installed worldwide, Uponor s pre-insulated pipe systems provide consistent, uninterrupted performance. Virtually maintenance-free, callbacks are minimal, and the tried, tested and trusted pre-insulated pipe is recognized for its ability to resist even the most aggressive water and soil conditions. This is especially important because the pipe is buried underground. With coil lengths available up to 600 feet, fewer underground joints are needed resulting in seamless piping runs. Popular Applications Uponor s pre-insulated pipe systems are used in buried or aboveground commercial and residential applications, such as schools, colleges, resorts, hotels, hospitals, agricultural areas, correctional facilities and housing developments, as well as distribution piping for radiant heating and cooling and snow and ice melting systems. Most recently, bio-gas, outdoor furnace and boiler contractors, as well as homeowners, depend on our products for a trouble-free, energy-efficient solution to piping underground when the heat source is located outside the home. 2 P re-insulated Pipe Systems (800)
3 Pre-insulated Pipe Systems Reference Chart Pre-insulated Pipe Systems ASTM Potable PEX Thermal Twin Thermal Single Pipe Dimension 1" 1¼" 1½" 2" 2½" " ½" 4" OD (inch) Wall thickness Tolerance ID (inch) ASTM Potable HDPE Pipe Dimension 1¼" 1½" 2" " 4" OD (inch) Wall thickness ID (inch) Ecoflex Pre-insulated Pipe Systems Design and Quotation Contact your Uponor representative for pricing and availability or details regarding any of the following: uponor offers technical support and system design services. The Ecoflex Uncoiler is available to purchase or lease for qualified orders. uponor fittings and EPDM Rubber End Caps are required at all pipe ends to ensure system integrity. Ecoflex Pre-insulated Pipe Systems product and installation training is available for special projects or through Uponor s online webinars. For webinar information, visit Find installation videos at and Pre-insulated Pipe Systems 1
4 Pre-insulated Pipe Systems Ecoflex Thermal Ecoflex Thermal is a pre-insulated piping system designed for fluid transfer in heating and cooling applications. Ecoflex Thermal is manufactured with single and twin Wirsbo hepex Engel-method crosslinked polyethylene (PEX-a) service pipes which are listed to ASTM F876, F877 and F1960 as well as CSA B17.5 and NSF-rfh. An oxygen-diffusion barrier extruded onto the service pipe protects ferrous components within the fluid pathway from corrosion. The pipe is surrounded by multi-layer, closed-cell, PEX-foam insulation and covered by a waterproof, corrugated HDPE jacket, making it ideal for direct-burial applications. ASTM Ecoflex Thermal Single ASTM Ecoflex Thermal Twin Part No. Part Description Coil Dimension List Price/Foot " Thermal Single with 5.5" Jacket, 600-ft. coil 8" x 5" $ ¼" Thermal Single with 5.5" Jacket, 500-ft. coil 8" x 44" $ ½" Thermal Single with 6.9" Jacket, 00-ft. coil 78" x 49" $ " Thermal Single with 6.9" Jacket, 00-ft. coil 78" x 49" $ ½" Thermal Single with 6.9" Jacket, 00-ft. coil 78" x 49" $ " Thermal Single with 7.9" Jacket, 00-ft. coil 84" x 5" $ ½" Thermal Single with 7.9" Jacket, 00-ft. coil 84" x 5" $ " Thermal Single with 7.9" Jacket, 00-ft. coil 86" x 5" $50.80 Part No. Part Description Coil Dimension List Price/Foot " Thermal Twin with 6.9" Jacket, 600-ft. coil 9" x 64" $ ¼" Thermal Twin with 6.9" Jacket, 500-ft. coil 9" x 5" $ ½" Thermal Twin with 6.9" Jacket, 00-ft. coil 78" x 49" $ " Thermal Twin with 7.9" Jacket, 00-ft. coil 84" x 5" $ ½" Thermal Twin with 7.9" Jacket, 00-ft. coil 84" x 5" $ P re-insulated Pipe Systems
5 Pre-insulated Pipe Systems Ecoflex Potable PEX Ecoflex Potable PEX is a pre-insulated piping system designed for potable-water distribution applications. Ecoflex Potable PEX is manufactured with single Uponor AquaPEX service pipes manufactured by the Engel-method (PEX-a) process and listed to ASTM F876, F877 and CSA B17.5 as well as NSF-pw and PEX The pipe is surrounded by multi-layer, closed-cell, PEX-foam insulation and covered by a waterproof, corrugated, HDPE jacket, making it ideal for direct-burial applications. Part No. Part Description Coil Dimension List Price/Foot " Potable PEX with 5.5" Jacket, 600-ft. coil 8" x 5" $ ¼" Potable PEX with 5.5" Jacket, 500-ft. coil 8" x 44" $ ½" Potable PEX with 6.9" Jacket, 00-ft. coil 78" x 49" $ " Potable PEX with 6.9" Jacket, 00-ft. coil 78" x 49" $ " Potable PEX with 7.9" Jacket, 00-ft. coil 84" x 5" $40.80 Ecoflex Potable HDPE Ecoflex Potable HDPE is a pre-insulated piping system designed for potable-water and hydronic heating and cooling applications where an oxygen barrier is not required. The HDPE service pipe, which has no oxygen barrier, is manufactured in accordance with PE 408, PE 608 or PE 4710, ASTM D05 or F714 C, AWWA C901 or C906, and NSF-pw. The pipe is surrounded by multi-layer, closed-cell, PEX-foam insulation and covered by a waterproof, corrugated, HDPE jacket, making it ideal for direct-burial applications. The HDPE service pipe used in Ecoflex Potable HDPE has the following hydrostatic ratings. 140 F at 80 psi 120 F at 101 psi 100 F at 125 psi 7 F at 160 psi ASTM Ecoflex Potable PEX Part No. Part Description Coil Dimension List Price/Foot ASTM Ecoflex Potable HDPE ¼" Potable HDPE with 55" Jacket, 00-ft. coil 75" x 51" $ ½" Potable HDPE with 5.5" Jacket, 00-ft. coil 72" x 51" $ " Potable HDPE with 5.5" Jacket, 00-ft. coil 72" x 42" $ " Potable HDPE with 6.9" Jacket, 00-ft. coil 78" x 49" $ " Potable HDPE with 7.9" Jacket, 00-ft. coil 86" x 5" $ Pre-insulated Pipe Systems
6 Pre-insulated Pipe Systems Rubber End Caps EPDM Rubber End Caps seal the exposed insulation between the jacket and service pipe after the pipe is cut to make a connection. Each end cap includes a stainless-steel clamp and an EPDM rubber o-ring. Note: Uponor requires end caps at all ends of the piping system to ensure insulation integrity. ASTM Single EPDM Rubber End Cap ASTM Single EPDM End Caps are used with ASTM Ecoflex Thermal Single, Ecoflex Potable PEX and Ecoflex Potable HDPE. ASTM Twin EPDM Rubber End Cap WIPEX TM Connections End Cap, 1" and 1¼" PEX Pipe with 5.5" Jacket 1 $ End Cap, 1¼", 1½" and 2" HDPE Pipe with 5.5" Jacket 1 $ End Cap, 1½", 2", 2½" PEX and " HDPE Pipe with 6.9" Jacket 1 $ End Cap, ", ½", 4" PEX and 4" HDPE Pipe with 7.9" Jacket 1 $90.0 ASTM Twin EPDM End Caps are used with ASTM Ecoflex Thermal Twin Twin End Cap, 1", 1¼" and 1½" PEX Pipe with 6.9" Jacket 1 $ Twin End Cap, 2" and 2½" PEX Pipe with 7.9" Jacket 1 $ ASTM WIPEX Fittings WIPEX dezincification-resistant (DZR) brass compression fittings transition PEX service pipe to a male NPT thread for a watertight, leak-resistant system WIPEX Fitting 1" PEX x 1" NPT 1 $ WIPEX Fitting 1¼" PEX x 1¼" NPT 1 $ WIPEX Fitting 1½" PEX x 1½" NPT 1 $ WIPEX Fitting 2" PEX x 2" NPT 1 $ WIPEX Fitting 2½" x 2" NPT 1 $ WIPEX Fitting " x 2½" NPT 1 $ WIPEX Fitting ½" x " NPT 1 $ WIPEX Fitting 4" x 4" NPT 1 $25.60 See pages 7-1 for ProPEX and HDPE connections. WIPEX Sleeve Pliers Use WIPEX Sleeve Pliers to quickly and easily install Uponor s WIPEX Fittings WIPEX Sleeve Pliers 1"-1½" 1 $ WIPEX Sleeve Pliers 1½"-½" 1 $ WIPEX Sleeve Pliers ½"-4" 1 $ P re-insulated Pipe Systems
7 Pre-insulated Pipe Systems Insulation Kits Insulation Kits make insulated connections of single or twin-style Ecoflex pre-insulated pipe with a jacket size of 5.5", 6.9" and 7.9". The kits feature two shells, stainless-steel bolts, plastic pins and joint-sealing compound. Note: Uponor fittings and EPDM Rubber End Caps are required at all ends of the piping system to ensure insulation integrity. The Straight Insulation Kit makes an insulated straight connection of single or twin-style Ecoflex pre-insulated pipe Straight Insulation Kit, 5.5", 6.9", 7.9" 1 $ The Elbow Insulation Kit makes an insulated elbow connection of single or twin-style Ecoflex pre-insulated pipe Elbow Insulation Kit, 5.5", 6.9", 7.9" 1 $ The Tee Insulation Kit makes an insulated tee connection of single or twin-style Ecoflex pre-insulated pipe Tee Insulation Kit, 5.5", 6.9", 7.9" 1 $ Straight Insulation Kit Elbow Insulation Kit Tee Insulation Kit The H-Insulation Kit allows for several options of insulated connections between four or five branches of single and twin-style Ecoflex pre-insulated pipe H-Insulation Kit, 5.5", 6.9", 7.9" 1 $1,04.80 H-Insulation Kit Connection Vaults provide a fully watertight, insulated enclosure for multiple straight-through and branch connections. Buried underground, Connection Vaults allow the system designer to virtually eliminate all branch connections typical of traditional underground system design. Step-down outlets are compatible with the majority of Ecoflex piping Ecoflex Connection Vault, 6 outlet 1 $1, Ecoflex Connection Vault, 8 outlet 1 $1, Connection Vaults Pre-insulated Pipe Systems 5
8 Pre-insulated Pipe Systems Accessories Wall Sleeve with Heat Shrink Seal Kit The Wall Sleeve and Heat Shrink Seal Kits offer a simple installation for new block construction or an existing wall with an irregular hole. Wall Sleeves are not engineered for specific bearing loads, but are offered for installation convenience and compatibility Wall Sleeve with Heat Shrink for 5.5" Jacket 1 $ Wall Sleeve with Heat Shrink for 6.9" Jacket 1 $ Wall Sleeve with Heat Shrink for 7.9" Jacket 1 $ Wall Sleeve Compression Wall Seal The Wall Sleeve is used with the Compression Wall Seal or Shrink Sleeves for new concrete walls. The Wall Sleeve can be field cut for proper fit within concrete forms. Wall Sleeves are not engineered for specific bearing loads, but are offered for installation convenience and compatibility Wall Sleeve for 5.5" Jacket 1 $ Wall Sleeve for 6.9" Jacket and 7.9" 1 $95.40 The Compression Wall Seal is used with the Wall Sleeve or may be used alone where a field core drill is preferred. The required core drill size is specified in the table below. Part No. Part Description Core Drill Each Qty. List Price/Ea Compression Wall Seal for 5.5" Jacket 8" 1 $ Compression Wall Seal for 6.9" Jacket 10" 1 $ Compression Wall Seal for 7.9" Jacket 10" 1 $67.40 Shrink Sleeves for Connection Vaults Shrink Sleeves ensure a watertight seal between the Ecoflex pipe and the exterior of the Connection Vault. Shrink Sleeves may also be used to repair minor damage to the corrugated HPDE jacket of Ecoflex pipe. Note: Refer to the Pre-insulated Pipe Design and Installation Manual for installation and repair procedures Vault Shrink Sleeve for 5.5" Jackets 1 $ Vault Shrink Sleeve for 6.9" Jackets 1 $ Vault Shrink Sleeve for 7.9" Jackets 1 $74.80 Shrinkable Repair Tape Uponor Shrinkable Tape is used to repair minor damage to the Ecoflex corrugated HPDE jacket of Ecoflex pipe. Note: Refer to the Pre-insulated Pipe Design and Installation Manual for installation and repair procedures Uponor Shrinkable Tape 255mm/0m (10"/98 ft.) 1 $ P re-insulated Pipe Systems
9 ProPEX Fittings Fittings A ProPEX Ring is required to make a ProPEX connection. The 1 2" and 4" rings include a leading-edge chamfer and integral stop edge to further simplify the use of ProPEX fittings. ProPEX Ring Part No. Part Description Pkg. Qty. List Price/Ea. Q ProPEX Ring, 1" 50 $0.6 Q ProPEX Ring, 1 1 4" 10 $1.00 Q ProPEX Ring, 1 1 2" 5 $1.1 Q ProPEX Ring, 2" 10 $2.69 ProPEX Engineered Plastic (EP), Lead-free (LF) Brass, Red Brass and Brass Couplings make PEX-to-PEX connections. Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Pkg. Qty. List Price/Ea. Q ProPEX EP Coupling, C\v" PEX x 1" PEX 10 $4.10 LF ProPEX LF Brass Coupling, C\v" PEX x 1" PEX 10 $11.70 Q ProPEX EP Coupling, 1" PEX x 1" PEX 10 $2.60 LF ProPEX LF Brass Coupling, 1" PEX x 1" PEX 10 $1.75 Q ProPEX Brass Coupling, 1" PEX x 1" PEX 10 $2.5 ProPEX Coupling ProPEX Fittings 2010 Q ProPEX EP Coupling, 1Z\v" PEX x C\v" PEX 10 $6.15 Q ProPEX EP Coupling, 1Z\v" PEX x 1" PEX 10 $6.40 Q47711 ProPEX EP Coupling, 1Z\v" PEX x 1Z\v" PEX 10 $7.25 Q ProPEX EP Coupling, 1Z\x" PEX x C\v" PEX 10 $7.5 G ProPEX DZR Brass Coupling, 1Z\x" PEX x C\v" PEX 10 $6.10 $ Q ProPEX EP Coupling, 1Z\x" PEX x 1" PEX 10 $7.50 Q ProPEX EP Coupling, 1Z\x" PEX x 1Z\v" PEX 10 $7.60 Q ProPEX EP Coupling, 1Z\x" PEX x 1Z\x" PEX 10 $7.75 Q ProPEX EP Coupling, 2" PEX x 1Z\x" PEX 1 $47.5 Q ProPEX Brass Coupling, 2" PEX x 1Z\x" PEX 5 $45.00 $ Q ProPEX EP Coupling, 2" PEX x 2" PEX 1 $60.65 Q ProPEX Brass Coupling, 2" PEX x 2" PEX 5 $55.40 $ G ProPEX DZR Brass Coupling, 2" PEX x 2" PEX 5 $55.5 $ $ New lower list price. Discontinued item; available while quantities last. Please contact Uponor Customer Service for availability. All sales are final ProPEX Fittings 7
10 ProPEX Fittings ProPEX Elbow ProPEX EP, LF Brass and Brass Elbows make tight 90-degree connections for Uponor PEX tubing in supply and return mains. Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Pkg. Qty. List Price/Ea. Q ProPEX EP Elbow, 1" PEX x 1" PEX 10 $4.25 LF ProPEX LF Brass Elbow, 1" PEX x 1" PEX 10 $14.90 Q ProPEX EP Elbow, 1Z\v" PEX x 1Z\v" PEX 10 $11.00 ProPEX Fittings 2010 ProPEX Tee Q ProPEX EP Elbow, 1Z\x" PEX x 1Z\x" PEX 10 $14.00 G ProPEX DZR Brass Elbow, 1Z\x" PEX x 1Z\x" PEX 10 $12.80 $ Q ProPEX EP Elbow, 2" PEX x 2" PEX 1 $85.50 Q ProPEX Brass Elbow, 2" PEX x 2" PEX 5 $78.10 $ ProPEX EP, LF Brass and Brass Tees make diverting connections for Uponor PEX tubing in supply and return mains. Branch size is listed last in the part description. Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Pkg. Qty. List Price/Ea. Q ProPEX EP Tee, 1" PEX x 1" PEX x 1" PEX 10 $4.80 LF ProPEX LF Brass Tee, 1" PEX x 1" PEX x 1" PEX 10 $24.00 Q ProPEX Brass Tee, 1" PEX x 1" PEX x 1" PEX 10 $4.40 $ Q47511 ProPEX EP Tee, 1Z\v" PEX x 1Z\v" PEX x 1Z\v" PEX 10 $12.50 G ProPEX DZR Brass Tee, 1Z\v" PEX x 1Z\v" PEX x 1Z\v" PEX 10 $11.50 $ Q ProPEX EP Tee, 1Z\x" PEX x 1Z\x" PEX x 1Z\x" PEX 10 $16.70 G ProPEX DZR Brass Tee, 1Z\x" PEX x 1Z\x" PEX x 1Z\x" PEX 10 $15.25 $ Q ProPEX EP Tee, 2" PEX x 2" PEX x 2" PEX 1 $105.5 Q ProPEX Brass Tee, 2" PEX x 2" PEX x 2" PEX 1 $96.25 $ ProPEX Reducing Tee ProPEX EP, LF Brass and Brass Reducing Tees make diverting connections for Uponor PEX tubing in supply and return mains. Branch size is listed last in the part description. Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Pkg. Qty. List Price/Ea. Q ProPEX EP Reducing Tee, 4" PEX x 4" PEX x 1" PEX 10 $9.65 LF ProPEX LF Brass Reducing Tee, 4" PEX x 4" PEX x 1" PEX 10 $21.00 Q ProPEX Brass Reducing Tee, 4" PEX x 4" PEX x 1" PEX 10 $8.85 $ Q ProPEX EP Reducing Tee, 1" PEX x 4" PEX x 4" PEX 10 $4.20 LF ProPEX LF Brass Reducing Tee, 1" PEX x 4" PEX x 4" PEX 10 $24.00 Q ProPEX Brass Reducing Tee, 1" PEX x C\v" PEX x C\v" PEX 10 $.85 $ $ New lower list price. Discontinued item; available while quantities last. Please contact Uponor Customer Service for availability. All sales are final. 8 P ropex Fittings
11 ProPEX Fittings Part No. Part Description Pkg. Qty. List Price/Ea. Q ProPEX EP Reducing Tee, 1" PEX x C\v" PEX x 1" PEX 10 $5.05 LF ProPEX LF Brass Reducing Tee, 1" PEX x C\v" PEX x 1" PEX 10 $24.00 Q ProPEX Brass Reducing Tee, 1" PEX x C\v" PEX x 1" PEX 10 $4.60 $ ProPEX Reducing Tee Q ProPEX EP Reducing Tee, 1" PEX x 1" PEX x Z\x" PEX 10 $4.40 LF ProPEX LF Brass Reducing Tee, 1" PEX x 1" PEX x Z\x" PEX 10 $24.00 Q ProPEX Brass Reducing Tee, 1" PEX x 1" PEX x Z\x" PEX 10 $4.05 $ Q ProPEX EP Reducing Tee, 1" PEX x 1" PEX x C\v" PEX 10 $4.85 LF ProPEX LF Brass Reducing Tee, 1" PEX x 1" PEX x C\v" PEX 10 $24.00 Q ProPEX Brass Reducing Tee, 1" PEX x 1" PEX x C\v" PEX 10 $4.40 $ Q ProPEX EP Reducing Tee, 1Z\v" PEX x 1" PEX x C\v" PEX 10 $9.90 G ProPEX DZR Brass Reducing Tee, 1Z\v" PEX x 1" PEX x C\v" PEX 10 $9.00 $ Q ProPEX EP Reducing Tee, 1Z\v" PEX x 1" PEX x 1" PEX 10 $11.55 G ProPEX DZR Brass Reducing Tee, 1Z\v" PEX x 1" PEX x 1" PEX 10 $10.55 $ Q47517 ProPEX EP Reducing Tee, 1Z\v" PEX x 1Z\v" PEX x C\v" PEX 10 $11.60 G47017 ProPEX DZR Brass Reducing Tee, 1Z\v" PEX x 1Z\v" PEX x C\v" PEX 10 $10.60 $ ProPEX Fittings 2010 Q47511 ProPEX EP Reducing Tee, 1Z\v" PEX x 1Z\v" PEX x 1" PEX 10 $11.95 G47011 ProPEX DZR Brass Reducing Tee, 1Z\v" PEX x 1Z\v" PEX x 1" PEX 10 $10.95 $ Q ProPEX EP Reducing Tee, 1Z\x" PEX x 1" PEX x C\v" PEX 10 $1.90 Q ProPEX EP Reducing Tee, 1Z\x" PEX x 1" PEX x 1" PEX 10 $1.90 Q ProPEX EP Reducing Tee, 1Z\x" PEX x 1Z\v" PEX x C\v" PEX 10 $15.85 G ProPEX DZR Brass Reducing Tee, 1Z\x" PEX x 1Z\v" PEX x C\v" PEX 10 $14.50 $ Q ProPEX EP Reducing Tee, 1Z\x" PEX x 1Z\v" PEX x 1" PEX 10 $16.45 G ProPEX DZR Brass Reducing Tee, 1Z\x" PEX x 1Z\v" PEX x 1" PEX 10 $15.00 $ Q47515 ProPEX EP Reducing Tee, 1Z\x" PEX x 1Z\v" PEX x 1Z\v" PEX 10 $17.45 G47015 ProPEX DZR Brass Reducing Tee, 1Z\x" PEX x 1Z\v" PEX x 1Z\v" PEX 10 $15.95 $ Q ProPEX EP Reducing Tee, 1Z\x" PEX x 1Z\x" PEX x C\v" PEX 10 $14.90 G ProPEX DZR Brass Reducing Tee, 1Z\x" PEX x 1Z\x" PEX x C\v" PEX 10 $1.65 $ Q ProPEX EP Reducing Tee, 1Z\x" PEX x 1Z\x" PEX x 1" PEX 10 $15.5 G ProPEX DZR Brass Reducing Tee, 1Z\x" PEX x 1Z\x" PEX x 1" PEX 10 $14.00 $ Q ProPEX EP Reducing Tee, 1Z\x" PEX x 1Z\x" PEX x 1Z\v" PEX 10 $15.75 G ProPEX DZR Brass Reducing Tee, 1Z\x" PEX x 1Z\x" PEX x 1Z\v" PEX 10 $14.40 $ $ New lower list price. Discontinued item; available while quantities last. Please contact Uponor Customer Service for availability. All sales are final ProPEX Fittings 9
12 ProPEX Fittings ProPEX Reducing Tee Part No. Part Description Pkg. Qty. List Price/Ea. Q ProPEX EP Reducing Tee, 2" PEX x 1Z\x" PEX x C\v" PEX 1 $9.00 Q ProPEX Brass Reducing Tee, 2" PEX x 1Z\x" PEX x C\v" PEX 5 $88.5 $ Q ProPEX EP Reducing Tee, 2" PEX x 1Z\x" PEX x 1" PEX 1 $80.90 Q ProPEX Brass Reducing Tee, 2" PEX x 1Z\x" PEX x 1" PEX 5 $7.90 $ Q ProPEX EP Reducing Tee, 2" PEX x 1Z\x" PEX x 1Z\v" PEX 1 $9.00 Q ProPEX Brass Reducing Tee, 2" PEX x 1Z\x" PEX x 1Z\v" PEX 5 $88.5 $ ProPEX Fittings 2010 Q ProPEX EP Reducing Tee, 2" PEX x 1Z\x" PEX x 1Z\x" PEX 1 $ Q ProPEX Brass Reducing Tee, 2" PEX x 1Z\x" PEX x 1Z\x" PEX 5 $95.95 $ Q ProPEX EP Reducing Tee, 2" PEX x 2" PEX x C\v" PEX 1 $88.50 Q ProPEX Brass Reducing Tee, 2" PEX x 2" PEX x C\v" PEX 5 $80.85 $ Q ProPEX EP Reducing Tee, 2" PEX x 2" PEX x 1" PEX 1 $86.80 Q ProPEX Brass Reducing Tee, 2" PEX x 2" PEX x 1" PEX 5 $79.25 $ Q ProPEX EP Reducing Tee, 2" PEX x 2" PEX x 1Z\v" PEX 1 $91.20 Q ProPEX Brass Reducing Tee, 2" PEX x 2" PEX x 1Z\v" PEX 5 $86.65 $ ProPEX Adapters Q ProPEX EP Reducing Tee, 2" PEX x 2" PEX x 1Z\x" PEX 1 $ Q ProPEX Brass Reducing Tee, 2" PEX x 2" PEX x 1Z\x" PEX 5 $9.5 $ ProPEX Brass Male Threaded Adapter ProPEX LF Brass and Brass Male Threaded Adapters connect Uponor PEX tubing to male NPT threads and are intended as transition fittings from metal to PEX. Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Pkg. Qty. List Price/Ea. LF ProPEX LF Brass Male Threaded Adapter, 1" PEX x C\v" NPT 10 $16.50 Q ProPEX Brass Male Threaded Adapter, 1" PEX x C\v" NPT 10 $8.10 LF ProPEX LF Brass Male Threaded Adapter, 1" PEX x 1" NPT 10 $16.20 Q ProPEX Brass Male Threaded Adapter, 1" PEX x 1" NPT 10 $11.45 LF45211 ProPEX LF Brass Male Threaded Adapter, 1Z\v" PEX x 1Z\v" NPT 10 $6.55 Q45211 ProPEX Brass Male Threaded Adapter, 1Z\v" PEX x 1Z\v" NPT 10 $ 0.00 LF ProPEX LF Brass Male Threaded Adapter, 1Z\x" PEX x 1Z\x" NPT 10 $48.90 Q ProPEX Brass Male Threaded Adapter, 1Z\x" PEX x 1Z\x" NPT 10 $40.00 LF ProPEX LF Brass Male Threaded Adapter, 2" PEX x 2" NPT 1 $ Q ProPEX Brass Male Threaded Adapter, 2" PEX x 2" NPT 1 $ G ProPEX DZR Brass Male Threaded Adapter, 2" PEX x 2" NPT 5 $50.00 $ $ New lower list price. Discontinued item; available while quantities last. Please contact Uponor Customer Service for availability. All sales are final. 10 P ropex Fittings
13 ProPEX Fittings ProPEX LF Brass and Brass Female Threaded Adapters connect Uponor PEX tubing to female NPT threads and are intended as transition fittings from metal to PEX. Note: ProPEX Tool is required. ProPEX Rings sold separately. ProPEX Brass Female Threaded Adapters Part No. Part Description Pkg. Qty. List Price/Ea. Q ProPEX Brass Female Threaded Adapter, 1" PEX x C\v" NPT 10 $12.55 LF ProPEX LF Brass Female Threaded Adapter, 1" PEX x 1" NPT 10 $20.45 Q ProPEX Brass Female Threaded Adapter, 1" PEX x 1" NPT 10 $15.60 LF45711 ProPEX LF Brass Female Threaded Adapter, 1Z\v" PEX x 1Z\v" NPT 10 $7.50 Q45711 ProPEX Brass Female Threaded Adapter, 1Z\v" PEX x 1Z\v" NPT 10 $5.00 LF ProPEX LF Brass Female Threaded Adapter, 1Z\x" PEX x 1Z\x" NPT 10 $80.00 Q ProPEX Brass Female Threaded Adapter, 1Z\x" PEX x 1Z\x" NPT 10 $4.50 LF ProPEX LF Brass Female Threaded Adapter, 2" PEX x 2" NPT 1 $ Q ProPEX Brass Female Threaded Adapter, 2" PEX x 2" NPT 5 $ ProPEX LF Brass, Red Brass and Brass Sweat Adapters transition Uponor PEX tubing to copper pipe. Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Pkg. Qty. List Price/Ea. LF ProPEX LF Brass Sweat Adapter, 1" PEX x 1" Copper 10 $11.50 V ProPEX Red Brass Sweat Adapter, 1" PEX x 1" Copper 10 $26.10 Q ProPEX Brass Sweat Adapter, 1" PEX x 1" Copper 10 $8.15 ProPEX Brass Sweat Adapters ProPEX Fittings 2010 LF45111 ProPEX LF Brass Sweat Adapter, 1Z\v" PEX x 1Z\v" Copper 10 $0.60 V45111 ProPEX Red Brass Sweat Adapter, 1Z\v" PEX x 1Z\v" Copper 10 $5.40 Q45111 ProPEX Brass Sweat Adapter, 1Z\v" PEX x 1Z\v" Copper 10 $21.00 LF ProPEX LF Brass Sweat Adapter, 1Z\x" PEX x 1Z\x" Copper 10 $46.75 V ProPEX Red Brass Sweat Adapter, 1Z\x" PEX x 1Z\x" Copper 10 $58.75 Q ProPEX Brass Sweat Adapter, 1Z\x" PEX x 1Z\x" Copper 10 $.00 LF ProPEX LF Brass Sweat Adapter, 2" PEX x 2" Copper 1 $15.00 Q ProPEX Brass Sweat Adapter, 2" PEX x 2" Copper 5 $84.5 ProPEX LF Brass, Red Brass and Brass Fitting Adapters transition Uponor PEX tubing to copper fittings. Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Pkg. Qty. List Price/Ea. Q ProPEX Brass Fitting Adapter, B\," PEX x Z\x" Copper 10 $4.40 Q ProPEX Brass Fitting Adapter, B\," PEX x C\v" Copper 10 $4.45 ProPEX Brass Fitting Adapters LF ProPEX LF Brass Fitting Adapter, C\v" PEX x Z\x" Copper 25 $12.00 $ New lower list price. Discontinued item; available while quantities last. Please contact Uponor Customer Service for availability. All sales are final ProPEX Fittings 11
14 ProPEX Fittings ProPEX Brass Fitting Adapters Part No. Part Description Pkg. Qty. List Price/Ea. Q ProPEX Brass Fitting Adapter, C\v" PEX x Z\x" Copper 25 $4.50 LF ProPEX LF Brass Fitting Adapter, C\v" PEX x C\v" Copper 25 $6.55 V ProPEX Red Brass Fitting Adapter, C\v" PEX x C\v" Copper 25 $17.25 Q ProPEX Brass Fitting Adapter, C\v" PEX x C\v" Copper 25 $4.80 LF ProPEX LF Brass Fitting Adapter, C\v" PEX x 1" Copper 10 $1.00 Q ProPEX Brass Fitting Adapter, C\v" PEX x 1" Copper 10 $5.90 LF ProPEX LF Brass Fitting Adapter, 1" PEX x 1" Copper 10 $12.20 Q ProPEX Brass Fitting Adapter, 1" PEX x 1" Copper 10 $8.65 ProPEX Fittings 2010 LF45011 ProPEX LF Brass Fitting Adapter, 1Z\v" PEX x 1Z\v" Copper 10 $26.95 Q45011 ProPEX Brass Fitting Adapter, 1Z\v" PEX x 1Z\v" Copper 10 $21.00 G45011 ProPEX DZR Brass Fitting Adapter, 1Z\v" PEX x 1Z\v" Copper 10 $7.70 $ LF ProPEX LF Brass Fitting Adapter, 1Z\x" PEX x 1Z\x" Copper 10 $44.50 Q ProPEX Brass Fitting Adapter, 1Z\x" PEX x 1Z\x" Copper 10 $.00 LF ProPEX LF Brass Fitting Adapter, 2" PEX x 2" Copper 1 $15.00 Q ProPEX Brass Fitting Adapter, 2" PEX x 2" Copper 5 $75.00 $ New lower list price. Discontinued item; available while quantities last. Please contact Uponor Customer Service for availability. All sales are final. 12 P ropex Fittings
15 HDPE Fittings HDPE Fittings HDPE fittings are made of PE408 material and are used to connect Ecoflex Potable HDPE products, which feature SDR11 pipe. B HDPE 90-degree Elbow, 2" HDPE x 2" HDPE 1 $4.45 B HDPE 90-degree Elbow, " HDPE x " HDPE 1 $89.55 B HDPE 90-degree Elbow, 4" HDPE x 4" HDPE 1 $12.10 B HDPE 45-degree Elbow, 2" HDPE x 2" HDPE 1 $44.40 B HDPE 45-degree Elbow, " HDPE x " HDPE 1 $88.50 B HDPE 45-degree Elbow, 4" HDPE x 4" HDPE 1 $10.95 B HDPE Tee, 2" HDPE x 2" HDPE x 2" HDPE 1 $57.65 B HDPE Tee, " HDPE x " HDPE x " HDPE 1 $97.60 B HDPE Tee, 4" HDPE x 4" HDPE x 4" HDPE 1 $14.40 HDPE Elbow HDPE Tee HDPE Fittings 2010 B " HDPE Flange Adapter 1 $8.70 B " HDPE Flange Adapter 1 $ B " HDPE Flange Adapter 1 $ HDPE Flange Adapter B " HDPE Flange Backup Ring 1 $69.45 B " HDPE Flange Backup Ring 1 $67.75 B " HDPE Flange Backup Ring 1 $75.75 HDPE Flange Backup Ring B HDPE End Cap, 2" HDPE 1 $2.10 B HDPE End Cap, " HDPE 1 $50.20 B HDPE End Cap, 4" HDPE 1 $77.55 HDPE End Cap B HDPE Reducing Coupling, " HDPE x 2" HDPE 1 $5.80 B HDPE Reducing Coupling, 4" HDPE x 2" HDPE 1 $81.55 B HDPE Reducing Coupling, 4" HDPE x " HDPE 1 $82.25 HDPE Reducing Coupling HDPE Fittings 1
16 Tools and Accessories ProPEX Tools and Accessories ProPEX 201 Corded Expander Tool Kit The Uponor ProPEX 201 Corded Expander Tool meets the need for reliable, cost-effective solutions to commercial-sized 2" PEX installations. This 110-volt, electro-hydraulic tool makes fast, easy connections for 2" Uponor PEX tubing. The ProPEX 201 Corded Expander Tool uses the same 2" H-series expander heads currently in use with other Uponor tools. Note: ProPEX 201 Corded Expander Tool Kit includes 2" head. Q ProPEX 201 Corded Expander Tool Kit 1 $5, Q ProPEX 201 Case, replacement part 1 $ Tools and Accessories 2010 ProPEX 200 Battery Expander Tool Kit and Accessories The ProPEX 200 Battery Expander Tool is an electro-hydraulic tool with microprocessor-based intelligence that makes fast, easy connections to C\," through 2" Uponor PEX tubing. The tool kit includes a 1Z\x" pistol for making connections to C\," through 1Z\x" tubing, a 2" pistol with a 2" H-series Expander Head for making connections to 2" tubing. The tool uses both H-series ProPEX Expander Heads as well as the regular ProPEX Expander Heads. Note: ProPEX Expander Heads for C\," through 1Z\x" tubing sold separately. Q ProPEX 200 Battery Expander Tool Kit (Includes 2" pistol, 1Z\x" 1 $9,27.80 pistol, 2" H-series expander head, 10' hydraulic hose, hydraulic pump, battery charger, two batteries, expander head lubricant, operation manual and roller case) Q ProPEX 200 Battery, replacement part 1 $ Q ProPEX 200 Battery Charger, replacement part 1 $417.0 Q ProPEX 200 Roller Case, replacement part 1 $ ProPEX 150 Li-Ion Battery Expander Tool Kit and Accessories The electro-mechanical ProPEX 150 Li-Ion Battery Expander Tool with a rechargeable lithium-ion battery expands C\,", Z\x", B\,", C\v", 1", 1Z\v" and 1Z\x" Uponor PEX tubing using the ProPEX connection method. The ProPEX 150 Li-Ion Battery Expander Tool uses the H-series ProPEX Expander Heads up to 1Z\x" as well as the standard ProPEX Expander Heads. The standard kit includes the Battery Expander Tool, two batteries, one battery charger, lubricant for expander heads and a heavy-duty carrying case. The deluxe kit includes all the components of the standard kit plus the ProPEX Auto Rotation Adapter, Z\x", C\v" and 1" regular ProPEX Expander Heads. Note: ProPEX Expander Heads sold separately. Q ProPEX 150 Li-Ion Battery Expander Tool Kit 1 $1, Q ProPEX 150 Deluxe Li-Ion Battery Expander Tool Kit 1 $2, Q ProPEX 150 Li-Ion Battery, replacement part 1 $64.76 Q ProPEX 150 Li-Ion Battery Charger, replacement part 1 $ tools and Accessories
17 Tools and Accessories The H-series ProPEX Expander Heads are used only with the ProPEX 150 Battery Expander Tool (Q ), ProPEX 200 Battery Expander Tool (Q ) and ProPEX 201 Corded Expander Tool (Q ). H-series ProPEX expander heads require fewer number of expansions than the regular ProPEX expander heads. Heads are identified with an H stamp on head. Note: The H-series ProPEX Expander Heads are not compatible with the ProPEX Hand Expander, ProPEX Air Expander or the Auto Rotation Adapter. H-series ProPEX Expander Head Q " H-series ProPEX Expander Head 1 $14.0 Q Z\v" H-series ProPEX Expander Head 1 $149.0 Q Z\x" H-series ProPEX Expander Head 1 $ Q * 2" H-series ProPEX Expander Head 1 $50.40 *Indicates that head can only be used with a 2" tool (Q or Q ) Graphite Grease lubricates ProPEX Expander Tool cones. Q Graphite Grease for ProPEX Tools, spare part 1 $7.0 Tube Cutters Graphite Grease Tools and Accessories 2010 Metal Tube Cutter cuts up to 1" PEX tubing. Plastic Tube Cutter cuts up to 1" PEX or C\v" MLC tubing. E Tube Cutter (metal) for up to 1" PEX 1 $4.55 E Tube Cutter Replacement Blade for E , spare part 1 $14.20 E Tube Cutter (plastic) for up to 1" PEX (C\v" MLC Tubing) 1 $28.5 E Tube Cutter Replacement Blade for E , spare part 1 $20.0 Tube Cutter Ratchet-style PEX Tube Cutter cuts up to 1" PEX and MLC tubing. Ratchet-style Large Dimension Tube Cutter cuts 1" to 2" PEX and 1" MLC tubing. E Ratchet-style Tube Cutter for up to 1" PEX and MLC tubing 1 $.85 E Tube Cutter Replacement Blade for E , spare part 1 $15.85 E Ratchet-style Large Dimension Tube Cutter for 1" to 2" PEX and 1" MLC tubing 1 $24.05 E Tube Cutter Replacement Blade for E , spare part 1 $70.00 Ratchet-style Tube Cutter Discontinued item; available while quantities last. Please contact Uponor Customer Service for availability. All sales are final. See the alphanumeric on pages for a listing of alternative part numbers Tools and Accessories 15
18 Pre-insulated Pipe Systems Ecoflex Samples Ecoflex Samples Part No. Part Description List Price/Ea " Thermal Single with 7.9" Jacket, Donut Sample $ " Thermal Twin with 6.9" Jacket, Donut Sample $ " Potable HDPE with 5.5" Jacket, Donut Sample $ " Potable PEX with 5.5" Jacket, Donut Sample $ " Thermal Single with 7.9" Jacket, Layered Sample $ " Thermal Twin with 6.9" Jacket, Layered Sample $ " Potable HDPE with 5.5" Jacket, Layered Sample $ " Potable PEX with 5.5" Jacket, Layered Sample $ " Thermal Single with 7.9" Jacket, Deluxe Sample $ " Thermal Twin with 6.9" Jacket, Deluxe Sample $ " Potable HDPE with 5.5" Jacket, Deluxe Sample $ " Potable PEX with 5.5" Jacket, Deluxe Sample $ " Potable PEX with 5.5" Jacket, Deluxe + Pre-insulated AquaPEX Sample $ " Thermal Twin with 6.9" Jacket, Training Sample Kit (pack of 5) $ " Thermal Single with 5.5" Jacket, Short Coil Sales Kit $ P re-insulated Pipe Systems
19 Pre-insulated Pipe Systems Pre-insulated Pipe Systems 17
20 Pre-insulated Pipe Systems ASTM Pre-insulated Pipe Systems Accessory Applications Chart Part Number Pipe Insulation Kits Wall Accessories Service Pipe Jacket Size WIPEX Fitting Rubber End Cap Tee Straight Elbow Compression Wall Seal Wall Sleeve Wall Sleeve Kit " 5.5" ¼" 5.5" ½" 6.9" " 6.9" ½" 6.9" " 7.9" ½" 7.9" " 7.9" " 6.9" ¼" 6.9" ½" 6.9" " 7.9" ½" 7.9" ¼" 5.5" NA ½" 5.5" NA " 5.5" NA " 6.9" NA " 7.9" NA " 5.5" ¼" 5.5" ½" 6.9" " 6.9" " 7.9" P re-insulated Pipe Systems
21 Pre-insulated Pipe Systems ASTM Pre-insulated Pipe Systems Weights and Dimensions Part Number Service Pipe Jacket Coil Length Coil Diameter Coil Width Coil Weight Weight Per Foot Thermal Single " 5.5" 600' 8" 5" 480 lbs lbs ¼" 5.5" 500' 8" 44" 400 lbs lbs ½" 6.9" 00' 78" 49" 48 lbs lbs " 6.9" 00' 78" 49" 525 lbs lbs ½" 6.9" 00' 78" 49" 591 lbs lbs " 7.9" 00' 84" 5" 840 lbs lbs ½" 7.9" 00' 84" 5" 894 lbs lbs " 7.9" 00' 86" 5" 1,110 lbs..70 lbs. Thermal Twin " 6.9" 600' 9" 64" 922 lbs lbs ¼" 6.9" 500' 9" 5" 85 lbs lbs ½" 6.9" 00' 78" 49" 555 lbs lbs " 7.9" 00' 84" 5" 804 lbs lbs ½" 7.9" 00' 84" 5" 1,020 lbs..40 lbs. Potable PEX " 5.5" 600' 8" 5" 480 lbs lbs ¼" 5.5" 500' 8" 44" 400 lbs lbs ½" 6.9" 00' 78" 49" 48 lbs lbs " 6.9" 00' 78" 49" 525 lbs lbs " 7.9" 00' 84" 5" 840 lbs lbs. Potable HDPE ¼" 5.5" 00' 72" 42" 00 lbs lbs ½" 5.5" 00' 72" 42" 00 lbs lbs " 5.5" 00' 72" 42" 420 lbs lbs " 6.9" 00' 78" 49" 720 lbs lbs " 7.9" 00' 86" 5" 1,080 lbs..60 lbs Pre-insulated Pipe Systems 19
22 Pre-insulated Pipe Systems 20 P re-insulated Pipe Systems
23 Pre-insulated Pipe Systems Pre-insulated Pipe Systems 21
24 22 PIPS_Supplement_H164_0610, Copyright 2010 Uponor. Printed in the United States Uponor, Inc th Street West Apple Valley, MN USA Tel: Fax: Web:
Product Catalog. Flawlessly moving water to provide the ultimate in comfort, safety and convenience for residential and commercial applications.
Product Catalog APRIL 2009 Radiant Heating and Cooling Systems Plumbing Systems Fire Safety Systems Pre-insulated Pipe Systems Flawlessly moving water to provide the ultimate in comfort, safety and convenience
More informationWirsbo / AquaPEX. AquaPEX Tube. White Coils. White Straight Lengths. Wirsbo AquaPEX plus Tubing. Red Coils. Blue Coils PAGE 055-1
2011 Wirsbo / AquaPEX PAGE 055-1 Code# Description Pkg Mfg# AquaPEX Tubing AquaPEX Tube Wirsbo AquaPEX tubing is used in hot and cold potable water distribution systems and Uponor residential fire safety
More informationAPRIL Flawlessly moving water to provide the ultimate in comfort, safety and convenience for residential and commercial applications.
Product Catalogue APRIL 2010 Radiant Heating and Cooling Systems Pre-insulated Pipe Systems Fire Sprinkler Systems Plumbing Systems Flawlessly moving water to provide the ultimate in comfort, safety and
More informationProduct Catalogue. July PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping
Product Catalogue July 2016 PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping Table of contents Uponor begins with you 3 Optimized for mobile 5 Uponor Design Services
More informationProduct Catalogue. July We mean progress. PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping
Product Catalogue July 2018 PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping We mean progress. Table of contents Table of contents 1 Uponor Design Services and
More informationPEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping
Product Catalog July 2016 PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping Table of contents Uponor begins with you 3 Optimized for mobile 5 Uponor Design Services
More informationPEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping
Product Catalog February 2017 PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping See inside for our newly reduced prices on PEX-a pipe supports, brass valves and
More informationRadiant heating and cooling Pre-insulated piping
Product Catalog July 2017 PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping Table of contents Upgrade to Uponor 3 Uponor Design Services and Technical Support...6
More informationProduct Catalogue. February We mean progress. PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping
Product Catalogue February 2019 PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping We mean progress. Table of contents Table of contents 1 Uponor Design Services
More informationWirsbo hepex Tubing, 5/16" to 2" Coils Submittal information Revision I: Sept. 18, 2018 Project information
Wirsbo hepex Tubing, 5/16" to 2" Coils Revision I: Sept. 18, 2018 1 ProPEX is a registered trademark of ProPEX is a trademark of Crosslinked polyethylene PEX-a Engel method 0.22 BTU/h/ft/ F 200 F at 80
More informationMATERIALS FOR PLUMBING SYSTEMS FITTING AND INSTALLATION GUIDE
MATERIALS FOR PLUMBING SYSTEMS FITTING AND INSTALLATION GUIDE THINK GLOBALLY, ACT LOCALLY CONTENTS Propex DZR fittings and pex 2 Why depend on Propex hot and cold piping system 3 Cross linked polyethylene
More informationPLUMBING, FIRE SAFETY, AND RADIANT HEATING AND COOLING SYSTEMS INSTRUCTIONAL GUIDE. Making ProPEX Connections
PLUMBING, FIRE SAFETY, AND RADIANT HEATING AND COOLING SYSTEMS INSTRUCTIONAL GUIDE Making ProPEX Connections Table of Contents Making ProPEX Connections....................... General ProPEX Connection
More informationEffective Date: April 2018 Void After: April 2019
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationSOLUTION ASTM F1960. Sioux Chief Tubing. Mr. PEX Tubing. Sioux Chief PowerPEX. Wolverine Brass WOLV-XPEX. Milwaukee Expansion Tools
ASTM SOLUTION Sioux Chief Tubing Mr. PEX Tubing Sioux Chief PowerPEX Wolverine Brass WOLV-XPEX Milwaukee Expansion Tools Phone: 1-800-523-5130 Fax: 1-800-338-1867 www.plumbmaster.com Phone: 1-800-944-9292
More informationEquivalent Length of Fittings
Equivalent Length of Fittings This section provides the equivalent length of piping pressure loss for several ProPEX fittings. The equivalent length is used to approximate the impact the fittings have
More informationContinental Industries STEEL SERVICE TEES or FAX Visit
Continental Industries STEEL SERVICE TEES 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
More informationCPVC Transition Fittings - Female Adapter. CPVC X LEAD FREE BRASS Lead Free Max working pressure F ASTM D 2846
CPVC Transition Fittings - Female Adapter STD4703BTLF12 1/2 CPVC X 1/2 FIP 25 250 CPVC Transition Fittings - Female Adapter STD4703BTLF34 3/4 CPVC X 3/4 FIP 25 250 CPVC Transition Fittings - Female Adapter
More informationPVC FASTTAP SADDLES for IPS Mains. Main Size OUTLET 1 FPT 3/4 CTS (7/8 OD) COMPRESSION 1 CTS (1 1/8 OD) COMPRESSION 3/4 IPS COMPRESSION
PVC FASTTAP SADDLES PVC FASTTAP SADDLES for IPS Mains THE ULTIMATE CONNECTION OUTLET 3/4 IPS FEMALE SLIP OR 1 IPS MALE SLIP SOLVENT WELD 1 IPS FEMALE SLIP SOLVENT WELD 3/4 MPT 1 MPT 3/4 FPT MAIN 13/16
More informationIAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC PURPOSE
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC 157-20067 1 PURPOSE 1.1 The purpose of this standard is to establish an acceptable standard
More informationContinental Industries TRANSITION FITTINGS or FAX Visit
Continental Industries TRANSITION FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
More informationSHARKBITE. PEX Plumbing a Better Home
SHARKBITE PEX Plumbing a Better Home Benefits of SharkBite PEX PROUDLY AMERICAN MADE Health/Safety No glue, solder, or solvents required for the connection process, which keeps potentially dangerous chemicals
More informationINSULPEX PRE-INSULATED PEXa PIPING DESIGN GUIDE. Construction Automotive Industry.
INSULPEX PRE-INSULATED PEXa PIPING DESIGN GUIDE www.rehau.com Construction Automotive Industry TABLE OF CONTENTS 1......Scope...3 2......Design Considerations...4 3......System Overview...5 3.1...System
More informationINSERT FITTINGS INSERT FITTINGS
Insert Tee Insert x Female Tee Insert Elbow Insert x Male Elbow Insert Coupling Insert x Male Adapter Insert x Female Adapter Insert Plug POLY and NYLON FITTINGS For use with Poly Tubing Fitting 1/2 3/4
More informationCONNECTION SYSTEM Includes Push-Fit and Barb Products and PEX Tubing
1 1-877-700-4242 1-877-700-4242 The CONNECTION SYSTEM Includes Push-Fit and Barb Products and PEX Tubing Contents Introduction 2-3 Push-Fit Fittings 4-6 Stops and Fixture Supply Fittings 7 Push-Fitting
More informationFord Service Saddles and Tapping Sleeves
Section AA 5/2001 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487
More informationSECTION BUTTERFLY VALVES
SECTION 15112 BUTTERFLY VALVES PART 1 GENERAL 1.01 SUMMARY A. All butterfly valves shall be of the tight closing, rubber seated type and fully comply with the latest revision of AWWA Standard C504, Class
More informationPVC Push Fit System. No glue. No wait. Just push and go.
PVC Push Fit System No glue. No wait. Just push and go. Join the revolution. A technical leader for over 50 years, LASCO fittings are relied upon worldwide. Now with the launch of their revolutionary
More informationGAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS
GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS CONTINENTAL INDUSTRIES, INC. The Ultimate Connection CONTINENTAL INDUSTRIES, INC. ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, Inc.,
More informationpvc well casing & drop pipe
C e r t a i nte e d pvc well casing & drop pipe P V C We l l P r o d u c t s Sure Fit PVC well casing and drop pipe have gained broad acceptance since their introduction almost 40 years ago. Today, due
More informationAquor House Hydrant V2
Aquor House Hydrant V2 IN-WALL OUTDOOR FAUCET SYSTEM FLUSH-MOUNT QUICK-CONNECT SELF-DRAINING ANTI-SIPHON NON-FREEZE VBH-SERIES AQUOR HOUSE HYDRANT V2: WALL HYDRANT / FREEZELESS SILLCOCK Freezeless sillcock
More informationAQUIFER DISTRIBUTION LTD. SASKATOON PH (306) FAX (306) REGINA PH (306) FAX (306) UPONOR AQUAPEX PIPE
UPONOR AQUAPEX PIPE Sec 15-32 F1040500 449 0104 0500 1/2" X 100' WHITE AQUAPEX PIPE 0.68 F1040750 449 0104 0750 3/4" X 100' WHITE AQUAPEX PIPE 1.32 F1041000 449 0104 1000 1" X 100' WHITE AQUAPEX PIPE 2.32
More informationTechnifit. Union Bulkhead Flow Controller. Fractional & Metric. Push-to-Connect Fittings. March 2006
Technifit TM Push-to-Connect Fittings March 2006 Male Female Elbow Tee Union Bulkhead Flow Controller Fractional & Metric PO Box 335 12740 State Route 4 Milford Center, Ohio 43045-0335 USA Phone: 937.349.4055
More informationSIMPLAIR PIPING TOOL. JXT Company
SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.
More informationFlexible & Intelligent
Flexible & Intelligent The flexible copper tube cuprotherm CTX tubes are copper tubes with a firmly adherent coating. Due to their structure they can be easily processed and are characterized by a flexibility
More informationThe Duopex Gas. to make every job quick and easy. it provides a revolutionary alternative for the professional plumber and 02_DUOPEX GAS GAS MANUAL
duopex gas manual The Duopex Gas pipe and fitting system is designed to make every job quick and easy. it provides a revolutionary alternative for the professional plumber and gasfitter. 02_DUOPEX GAS
More informationMUELLER. Mega-Lite Drilling Machine. Reliable Connections. table of contents PAGE. Equipment 2. Operating Instructions 3-4. Parts Information 5
operating Instructions manual MUELLER Mega-Lite Drilling Machine table of contents PAGE Equipment 2 Operating Instructions 3-4 Parts Information 5 Travel Charts 6-11! WARNING: 1. Read and follow instructions
More informationQuality Plastic Pipe Fittings. Technical Data. Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed
Quality Plastic Pipe Fittings Technical Data Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed Effective April 1, 2002 PIPE DIMENSIONS IPS-IRON PIPE SIZE Minimum
More informationAPG001. Application Guide for Gas. T: F: E:
APG001 Application Guide for Gas T: 01480 442600 F: 01480 458829 E: customerservice@gpsuk.com www.gpsuk.com Application Guide for Gas Introduction 3-4 Range Overview 5-6 PE80 Yellow Pipe 7-9 Excel Yellow
More informationSECTION DOMESTIC WATER PIPING
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections
More informationSPECIFICATION SHEET. OMEGAFLEX, Ltd. TracPipe Flexible Gas Piping Specification Sheet Specification date. ProjectName
OMEGAFLEX, Ltd. TracPipe Flexible Gas Piping Specification Sheet Specification date ProjectName Model Number(s) - FGP-SS4-50 FGP-SS4-40 FGP-SS4-32 FGP-SS4-28 FGP-SS4-22 FGP-SS4-15 FGP-SS4-12 Note: This
More information3 & 4-Way Mixing & Diverting Valves
Applications: 3-Way Valve The ESBE VRG series of 3 & 4-way valves are designed to mix water to the appropriate temperature to meet the zone or system requirements within heating and cooling systems. The
More information5k Slickline Lightweight Pressure Control Equipment 4 ID
5k Slickline Lightweight Pressure Control Equipment 4 ID Table of Contents 5k Slickline Lightweight Pressure Control Equipment 4 ID... 1 Hydraulic Slickline Stuffing Box... 3 Wireline Lubricators... 4
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More information750 Cable Cutter INSTRUCTION MANUAL
INSTRUCTION MANUAL 750 Cable Cutter Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product at www.greenlee.com
More informationSanitizers. Sanitizers. Sanitizers for Pools & Spas
Sanitizers Sanitizers for Pools & Spas 213 213 IntelliChlor Salt Chlorinator Featured Highlights IntelliChlor Salt Chlorinator IntelliChlor Salt Chlorinator uses common table salt to produce all the chlorine
More informationInstruction Manual Updated 7/26/2011 Ver. 2.2
4-Unit Model MB HTHP Filter Press #171-50-4: 115-Volt #171-51-4: 230-Volt Instruction Manual Updated 7/26/2011 Ver. 2.2 OFI Testing Equipment, Inc. 11302 Steeplecrest Dr. Houston, Texas 77065 U.S.A. Tele:
More informationModel MTB-ASME Horizontal Bladder Tanks
DATA SHEET Model MTB-ASME Horizontal Bladder Tanks Features n UL Listed and FM Approved for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure
More informationFluid Dispensing Systems H O S E R E E L S H O S E S HOSE REELS
Fluid Dispensing Systems H O S E R E E L S H O S E S HOSE REELS HOSE REELS SIGNATURE SERIES H O S E S R E E L S FEATURES & BENEFITS Eight position locking precision die cast latch mechanism, with secure
More informationMEDICAL EQUIPMENT CATALOG
THE MOST TRUSTED MEDICAL EQUIPMENT IN NORTH AMERICA MEDICAL EQUIPMENT CATALOG Total Components Including Bulk Oxygen Supply, Back up and Delivery Equipment Designs for High Pressure, Liquid or Bulk Applications
More informationModel MTB-ASME Vertical Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationModel MTB-ASME Vertical Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationC Lite CAD SERIES. ACS Approved. Patented CAD-2 diaphragm technology. Rugged copolymer polypropylene base. Quality brass air stem with o-ring seal
2 C Lite CAD SERIES Patented CAD-2 diaphragm technology Unique 3 piece construction Reinforced Plastic Connection Durable continuous strand fiberglass sealed with epoxy resin NSF Standard 61, CE/PED, WRAS,
More informationHVAC Heating & Cooling Solutions
HVAC Heating & Cooling Solutions CAT-0817 HEATING & COOLING DUCT HOSES High quality ducting available in a multitude of color combinations, constructions, and cuff options to acomidate all environments
More informationMaterial Handling Hose
Novaflex 5000 Slurry King Hose Pure Gum Liner Tough, versatile alternative to inflexible, cumbersome steel tubing. The easy handling and reusable quick-fastening flange system make installation a snap.
More informationHorizontal Bladder Tanks
DATA SHEET Horizontal Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationINTERLOCKED METAL HOSE
INTERLOCKED METAL HOSE HOSE FUNDAMENTALS Penflex interlocked metal hoses are made for a variety of specialized industrial applications and are available in a wide range of metals, styles and sizes. Interlocked
More informationLOKRING FOR THE BEST A/C REPLACEMENT CONNECTIONS
Santech Industries, Inc. 2450 Handley Ederville Road Ft. Worth, TX 76118 USA Phone: (817) 589-1212 Fax: (817) 589-5900 E-Mail: sales1@santech.com - Web: http://www.santech.com LOKRING FOR THE BEST A/C
More informationWater Pressure Reducing Valves
Water Pressure Reducing Valves Controlling Water Pressure in Residential, Commercial, and OEM Applications Watts.com The One-stop Shop for Pressure Regulators Watts is the manufacturer of choice for Water
More informationVERTICAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Tight Spaces UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
More informationNo Lead Pex Fittings. Price List LT-NLPF1015 Effective Date: October 1, 2015 Supersedes April 25, 2014 Price List
Pex Fittings Price List LT-NLPF1015 Effective Date: October 1, 2015 Supersedes April 25, 2014 Price List Third Party Certified / Forged Brass Legend Brass PEX Fittings are dezincification resistant and
More informationInstruments AQDC. Aluminium Quick Disconnects. Light-weight, quick and reliable method a making a number of pneumatic connections.
AQDC Aluminium Quick Disconnects Instruments Light-weight, quick and reliable method a making a number of pneumatic connections. 8, 16, 24 and 32 port stainless steel quick disconnects. Available with
More informationFlexible Metal Hose Products
Flexible Metal Hose Products Specialty Flexible Hose Solutions of Stainless Steel The AEROCOM Advantage Aerocom offers engineered solutions that address specific flexible piping challenges such as vibration,
More informationCOMPRESSION TUBE FITTINGS
COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM LET-LOK TUBE FITTINGS DESCRIPTION The HAM-LET GROUP has produced high quality tube and pipe LET-LOK HOW DOES IT WORK? A HAM-LET has gained an
More informationAWWA C504 COMPLIANT VALVES FROM 3 THRU 108
AWWA C504 COMPLIANT VALVES FROM 3 THRU 108 PO Box 411 Berwick PA 18603 800-247-VALV www.crispinvalve.com 500 SERIES: Sizes 3-20 Available The K-Flo 500 Series is a heavy-duty resilient seated butterfly
More information130400A 1/2 NPT Female A 3/4 NPT Female A 1 NPT Female A 1 1/4 NPT Female A 1 1/2 NPT Female A 2 NPT Female
88.0A www.caleffi.com Venturi Style Balancing Valve Copyright 0 Caleffi 0 Series Function Product Range Balancing valves are hydraulic devices that can precisely control the flow rate of the fluid that
More informationFunction. size 1-¼ inch: 9-¾" size 1-½ inch: 11-¼" size 2 inch: 12-¾" A A A A A/96A A/99A
Hydro separator CLEI 0076/6 N CCREDITED Replaces 0076/4 N ISO 900 No. 000 ISO 900 M 2654 unction The Caleffi 548 and N hydraulic separator creates a zone with a low pressure loss, which enables connected
More informationSanitizers. Sanitizers. Sanitizers for Pools & Spas
for Pools & Spas 207 IntelliChlor Salt Chlorinator Featured Highlights IntelliChlor Salt Chlorinator IntelliChlor Salt Chlorinator uses common table salt to produce all the chlorine a pool needs, safely,
More informationQuincy QSG Gasends 225, 430, 580, 730 & 850
Quincy QSG Gasends 225, 430, 580, 730 & 850 Parts Manual This publication contains important safety information and should be made available to all personnel who operate and/or maintain this product. Carefully
More informationVertical Bladder Tanks
DATA SHEET Vertical Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationPump On Demand. Skimmer System
Pump On Demand Skimmer System POD (Pump on Demand) Skimmer System Application Out-of-the-box LNAPL recovery in 2-inch and larger-diameter wells. The POD Skimmer model TR-610 recovers light-end hydrocarbons
More informationRUBBER EXPANSION JOINTS
RUBBER EXPANSION JOINTS SPOOL-TYPE STANDARD ARCH 150, 200, 200XL The heavy duty proven "industry work horse" Time tested performer Fabric and steel reinforced Constructed for maximum strength and reliability.
More informationTECHNICAL DATA. Trimpac 244a. September 16, 2013
September 16, 2013 Trimpac 244a 1. DEsCrIpTION DESCRIPTION TRIMPAC Model B-1 and B-1B is a factory-assembled trim package with an electric release module in a metal enclosure. The standard trim normally
More informationHORIZONTAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Low Ceilings UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
More informationCasing Spacer Technology Leaders
Casing Spacer Technology Leaders Benefit today. Save down the line. www.racispacers.com NORTH AMERICA Why Raci Raci has been the global leader in casing spacer technology since 1952. Our uniquely designed,
More informationEUROFLO CULVERT PIPE. Fittings / Pipes
EUROFLO CULVERT PIPE Fittings / Pipes F EUROFLO FITTINGS RUBBERS SIZE CODE COMMENT 160 OD 200 OD 250 OD 315 OD 400 OD 500 OD 630 OD 800 OD 1000 OD 1200 OD 1550 OD 1750 OD 1950 OD 520-160-RBR 520-200-RBR
More informationAll DZR stopvalve (BS1010). copper x copper. Gunmetal body. All parts in contact with water are made from material resistant to dezincification.
All DZR stopvalve (BS1010). copper x copper. Gunmetal body. All parts in contact with water are made from material resistant to dezincification. K551DZR Size Pattern No. Pack 1 Qty Pack 2 Qty Code Barcode
More informationINSERT PRESSURE FITTINGS PRODUCTS PRICE LIST PRICE GROUP DISCOUNT MULTIPLIER DESCRIPTION 05 PVC INSERT FITTINGS
PRICE GROUP DESCRIPTION 05 PVC INSERT FITTINGS DISCOUNT MULTIPLIER Phone: (315) 451-1100 or (800) 776-2266 Fax: (800) 729-3299 7652 Morgan Road Liverpool, New York 13090 PRODUCTS INSERT PRESSURE FITTINGS
More informationGalvanized Rigid Conduit
Galvanized Rigid Conduit Conforms To: C80.1 - UL 6 ANSI C-80.1 UL Min. WGT. Per 100 Feet in LBS. INCL. CP. O.D. I.D. Thickness Threads Per Inch Feet Per Lift Color Code Thread Protector 1/2" 79.840.632.104
More informationPressure Dump Valve Service Kit for Series 3000 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 000 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00, 400, 500, and 700 applicator
More informationFIBERGLASS MULTI-GARD MULTI-CELL RACEWAY
FIBERGLASS MULTI-GARD MULTI-CELL RACEWAY Heavy Wall Bullet Resistant Bends Terminators Couplings Adapters Expansion Joints Epoxy Kits Spacers 23240 Chagrin Blvd Suite 405 Cleveland, OH 44122 216-464-3400
More informationASYBCO 90 O ELBOW LONG RADIUS O.D. I.D.
90 O ELBOW LONG RADIUS Standard weight Extra strong Schedule 160 Double extra strong ASTM A-234 ASME / ANSI B16.9 Carbon and ferritic alloy steel Produced from X-rayed, stress-relieve welded pipe. Welds
More informationRight-Angle Tube Roller Model
SPECIFICATIONS Model no. Free Speed (RPM) Throttle Rotation Max. Torque Ft-Lb Air Pressure psi Air Inlet Hose Air Flow @Free Speed Spindle Weight 909-1700 95 Lever type Reversible 240 90 1/2 NPT 1/2 I.D.
More informationLOKRING Stainless Steel (SS40) and Carbon Steel (CS) Pipe Fittings Table of Contents
38376 APOLLO PARKWAY WILLOUGHBY, OHIO USA 44094 www.lokring.com LOKRING Stainless Steel (40) and Carbon Steel (CS) s Table of Contents Information Page 2.. Design Page 3-4.. Pressure and Temperature Ratings
More informationDP Spare parts list. Demolition pulverizer. DP 2800 s/n DEQ Construction Tools GmbH No
DP 2800 Spare parts list Demolition pulverizer DP 2800 s/n DEQ139266-2018 Construction Tools GmbH No. 3390719501 2018-01-01 General information This spare parts list applies to the following: Part number
More informationPE 2708 CTS & IPS GAS PIPE
Specifications: Resin Chevron Phillips TR418Q PE 2708 Resin formulation listed in PPI TR4 Hydrostatic Design Basis: 1250 psi @ 73 F, 800 psi @ 140 F Cell Classification per ASTM D3350 = 234373E or 234375E
More informationInstruction Manual. PE-25/32/37 Tapping Machines. POLYTAPP Valves
Instruction Manual PE-25/32/37 Tapping Machines & POLYTAPP Valves Nov 2016, Revision 2 Document Number 3000111 2 M.T. Deason Company, Inc. PO Box 101807 Birmingham, AL 35210 Phone: 205 956 2266 Fax: 205
More information4 IN. BALL LAUNCHER Engine Mounted / PTO Driven
4 IN. BALL LAUNCHER Engine Mounted / PTO Driven OPERATOR S PARTS and MAINTENANCE MANUAL 2006 EDITION BL-MAN-4EN Creation Revision date: 10MAR06 date: by: Ivon LeBlanc by: Table of Contents Table of Contents...
More informationHoses and Lances 20,000 PSI
Jetstream provides a full arrangement of hoses and flex lances for ultra high pressure waterblasting. The hoses and lances are designed to be durable and reliable for any 20,000 psi application. A large
More informationAMTEC SUPPORT GRIPS STANDARD, HEAVY DUTY & CONDUIT GRIPS
AMTEC SUPPORT GRIPS STANDARD, HEAVY DUTY & CONDUIT GRIPS DESIGNED TO HOLD THE WEIGHT FOR ELECTRICAL CABLE AS IT HANGS IN VERTICAL, SLOPING OR HORIZONTAL POSITIONS. EASILY INSTALLED AND REMOVED USING NO
More informationTank Blanketing Pressure Regulators RHPS Series
www.swagelok.com Tank Blanketing Pressure Regulators RHPS Series Types: pressure reducing and vapor recovery 16L stainless steel construction 1/2, 1, and 2 in. end connections Working pressures up to 22
More information3/8" Dr. Air Butterfly Impact Wrench
8192106 3/8" Dr. Air Butterfly Impact Wrench Owner s Manual Read and understand all instructions before use. Retain this manual for future reference. Specifications Construction: Polished aluminum and
More informationAir Operated Hydraulic Pumping Systems to 50,000 psi
High Pressure Equipment Air Operated Hydraulic Pumping Systems to 50,000 psi PS-10: 10,000 psi PS-20: 20,000 psi PS-30: 30,000 psi PS-40: 40,000 psi PS-50: 50,000 psi PS-90: 90,000 psi High Pressure air
More informationVertical and Horizontal Bladder Tanks
DATA SHEET Vertical and Horizontal Tanks Application The ANSUL bladder tank is one component in a balanced pressure proportioning system. Its operation requires no external power other than a pressurized
More informationTECHNICAL DATA. Trimpac 251a. Spetember 16, 2013
Spetember 16, 2013 Trimpac 251a 1. DEsCrIpTION DESCRIPTION TRIMPAC Model B-6 and B-6B is a factory assembled trim package for a double interlocked preaction system with an electric/pneu-lectric release
More informationGas Lines. Technical Manual. Sumitomo (SHI) Cryogenics of America, Inc Vultee Street Allentown, PA U.S.A.
Gas Lines Technical Manual Sumitomo (SHI) Cryogenics of America, Inc. 1833 Vultee Street Allentown, PA 18103-4783 U.S.A. Revision F: April 2008 261320A TABLE OF CONTENTS Page DESCRIPTION...1 SPECIFICATIONS...2
More information2 1 6 SHARKBITE C ATA LO G
2 16 SHARKBITE CATALOG INDEX SHARKBITE SHARKBITE SHARKBITE SHARKBITE THE MARK OF QUALITY Lead-Free/Safety* All SharkBite fittings are made of Lead Free DZR Brass and exceed ASSE 1061 Section 1V, 4.1 Materials-Dezincification
More informationOVERVIEW pg 3. Major Points to Consider pg 3 Minor Points to Consider pg 3. INSTRUCTIONS pg 4
TABLE OF CONTENTS OVERVIEW pg 3 Major Points to Consider pg 3 Minor Points to Consider pg 3 INSTRUCTIONS pg 4 How Does Nordic Freeze Work pg 4 How Long Will the Ice Plug Take to Form pg 4 How Do I Know
More informationCB 350. Spare parts list. Hydraulic concrete buster. CB 350 s/n DEQ Construction Tools GmbH No
CB 350 Spare parts list Hydraulic concrete buster CB 350 s/n DEQ179000-2018 Construction Tools GmbH No. 3390803501 2018-01-01 General information This spare parts list applies to the following: Part number
More informationWHEATLEY WHEATLEY SERIES 500 SWING CHECK VALVE. Installation, Operation and Maintenance Manual
WHEATLEY SERIES 500 SWING CHECK VALVE STANDARD INTEGRAL SEAT & OPTIONAL REMOVABLE SEAT 2" FP - 6" FP 150# - 1500# 8" FP - 12" FP 150# - 900# API 6D and B16.34 2" FP - 4" FP 5000# DRILLING PRODUCTION VALVE
More informationGiacomini Multigas System 0543EN November 2017 Multilayer pipe G999
Multigas System General info Standards UNI 7129-1:2015 and UNI 11344:2014 (concerning the features of the multilayer gas pipe and its installation in homes) indicate that the multilayer system can be used
More information