Effective Date: April 2018 Void After: April 2019

Size: px
Start display at page:

Download "Effective Date: April 2018 Void After: April 2019"

Transcription

1 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction. The most updated information on this Certificate of Listing is available online at pld.iapmo.org Effective Date: April 2018 Product: Crosslinked Polyethylene Water Distribution System th St. W. Apple Valley, MN Identification: The tubing shall be marked with the manufacturer's name or trademark, ASTM F877 PEX, nominal size, standard dimension ratio and a code number identifying the compound and the date of manufacture. The fittings shall be marked with the manufacturer's name or trademark, pressure rating at 180 F and ASTM F877 or PEX when size permits. Both tubing and fittings shall be marked with the UPC and/or UMC certification mark. Characteristics: Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in one standard dimension ration and intended for a maximum 100 psi water service up to and including a maximum working temperature of 180 F. Components are comprised of tubing and/or fittings. To be installed in accordance with manufacturer's instructions and the latest edition of the Uniform Plumbing Code and Uniform Mechanical Code. Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition has been granted based upon the This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material, manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence of non-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing. Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc. Any alteration of this certificate could be grounds for revocation of the listing. This document shall be reproduced in its entirety.

2 Product: laboratory's compliance to the applicable requirements of ISO/IEC Products are in compliance with the following code(s): Uniform Plumbing Code (UPC ) Uniform Mechanical Code (UMC ) Products are in compliance with the following standard(s): ASTM F a NSF/ANSI

3 MODELS: Uponor Rapid Roll Out Mat Family (1) Man ifo ld (1) PEX Type (1) On Cent er (2) Widt h (3) Length (3) M Example: M = 1/2 hepex mat, tubing 6 inches o.c., 48" wide, 146 feet long, no manifold assembly Manifold (1) 0= No Manifold; 1= Left Hand Manifold Assembly; 2 = Right Hand Manifold Assembly PEX TYPE (1) 3= 1/2" hepex; 4 = 5/8" hepex; 7= 1/2" Aqua PEX; 8= 5/8" AquaPEX On Center (2) listed in inches (e.g. 6" oc = 06; 9" oc = 09) Width (3) listed in inches (e.g. 60 inches = 060) Length (3) listed in feet (75 feet = 075; 125 feet = 125, etc.) DESCRIPTION MODEL NO. 3/4 Plastic Bend Support A /2 ProPEX Rings Q /4 ProPEX Rings Q /4 x 3/4 x 1/2 ProPEX EP Reducing Tee Q /4 ProPEX EP Elbow Q /2 Uponor AquaPEX White F /2 Wirso hepex A /4 x 3/4 x 5/8 ProPEX EP Reducing Tee Q /8 Uponor AquaPEX White F /8 Wirso hepex A AQUAPEX Page 3 of 6

4 Wirsbo AquaPEX Tubing 1/4", 3/8", 1/2", 5/8", 3/4" 1", 1-1/4", 1-1/2", 2" Uponor AquaPEX Red, Blue (coated) plus Tubing 1/2", 3/4" 1" DESCRIPTION MODEL NO. 1/4" Pex Lav Riser 12" F /4" Pex Lav Riser 20" F /4" Pex Lav Riser 30" F /4" Pex Lav Riser 36" F /4" Pex Lav Riser 12 F /4" Pex Lav Riser 20" F ProPEX Swivel Closet Adapter, 1/2" PEX ProPEX Adapter Closet Adapter, 1/2" PEX Plug, 1/2" Plug, 3/4" Plug, 1" ProPEX Fitting Adapter, 5/8" PEX x 1/2" CU ProPEX Fitting Adapter, 5/8" PEX x 3/4" CU ProPEX Adapter, 5/8" PEX x 1/2" CU ProPEX Adapter, 5/8" PEX x 3/4" CU ProPEX Male NPT, 5/8" PEX x 3/4" NPT ProPEX Stainless Steel 1/2" PEX x 1/2" Male NPT ProPEX Stainless Steel 3/4" PEX x 3/4" Male NPT ProPEX Stainless Steel 1" PEX x 1" Male NPT PropPEX EP Coupling, 3/4" PEX x 1" PEX, ProPEX Female NPT 5/8" x 3/4" NPT ProPEX Polybutylene Adapter, 3/4" PEX x 3/4" PB Barb ProPEX Poly Adapter, 1" PEX x 1" Poly Barb Tee, 1/2" x 1/2" x 1/2" Tee, 3/4" x 3/4" x 3/4" Tee, 3/4" x 3/4" x 1/2" Tee, 3/4" x 1/2" x 3/4" Tee, 3/4" x 1/2" x 1/2" Tee, 1" x 1" x 1" Tee, 1" x 1" x 3/4" Tee, 1" x 3/4" x 1" Tee, 1" x 3/4" x 3/4" Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Page 4 of 6

5 Tee, 1" x 1" x 1/2" EP ProPEX Tee 1-1/2" x 1-1/2" x 1-1/2" EP ProPEX Tee 1-1/2" x 1-1/2" x 1-1/4" EP ProPEX Tee 1-1/2" x 1-1/2" x 1" EP ProPEX Tee 1-1/2" x 1-1/2" x 3/4" EP ProPEX Tee 1-1/2" x 1" x 1" EP ProPEX Tee 1-1/2" x 1" x 3/4" EP ProPEX Tee 1-1/4" x 1-1/4" x 1-1/4" EP ProPEX Tee 1-1/4" x 1-1/4" x 1" EP ProPEX Tee 1-1/4" x 1-1/4" x 3/4" EP ProPEX Tee 1-1/4" x 1" x 1" EP ProPEX Tee 1-1/4" x 1" x 3/4" Elbow, 1/2" Elbow, 3/4" Elbow, 1" EP ProPEX Elbow, 1-1/4" EP ProPEX Elbow, 1-1/2" Couple (union), 3/8" Couple (union), 1/2" Couple (union), 1/2" x 3/4" Couple (union), 3/4" Couple (union), 1" Metal Bend Support, 3/8" Metal Bend Support, 1/2" Metal Bend Support, 3/4" Drop Ear Bend Support, 3/8" Drop Ear Bend Support, 1/2" Straight-thru Support, 1/2" Plastic Bend Support, 3/8" Plastic Bend Support, 1/2" Plastic Bend Support, 3/4" Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q A A A F F F A A A /8" Plastic Ear Bend Support F /2" Plastic Ear Bend Support F Plastic Bend Support, 1/2" Plastic Bend Support, 3/4" Plastic Bend Support, 1" ProPEX Ring with Stop 1" ProPEX Ring with Stop 1 1/4" ProPEX Ring with Stop 1 1/2" A A A Q Q Q Page 5 of 6

6 ProPEX Ring with Stop 2" Q Page 6 of 6

Effective Date: May 2017 Void After: May Product: Press and Nail Connections File No. M-8332

Effective Date: May 2017 Void After: May Product: Press and Nail Connections File No. M-8332 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

Effective Date: December 2017 Void After: December 2018

Effective Date: December 2017 Void After: December 2018 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

Effective Date: January 2018 Void After: January Product: Fill Valves (Anti-Siphon) File No. 3733

Effective Date: January 2018 Void After: January Product: Fill Valves (Anti-Siphon) File No. 3733 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

Wirsbo / AquaPEX. AquaPEX Tube. White Coils. White Straight Lengths. Wirsbo AquaPEX plus Tubing. Red Coils. Blue Coils PAGE 055-1

Wirsbo / AquaPEX. AquaPEX Tube. White Coils. White Straight Lengths. Wirsbo AquaPEX plus Tubing. Red Coils. Blue Coils PAGE 055-1 2011 Wirsbo / AquaPEX PAGE 055-1 Code# Description Pkg Mfg# AquaPEX Tubing AquaPEX Tube Wirsbo AquaPEX tubing is used in hot and cold potable water distribution systems and Uponor residential fire safety

More information

Effective Date: not available -Rev. 12/1/2017- Void After: Product: Water Closets with Dual Flush Feature File No. 5645

Effective Date: not available -Rev. 12/1/2017- Void After: Product: Water Closets with Dual Flush Feature File No. 5645 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

Effective Date: February 2018 Void After: February Product: Bathtubs (Plastic) File No. 3638

Effective Date: February 2018 Void After: February Product: Bathtubs (Plastic) File No. 3638 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

Effective Date: July 2016 Void After: July Product: ABS-DWV Pipe and Fittings File No. 9266

Effective Date: July 2016 Void After: July Product: ABS-DWV Pipe and Fittings File No. 9266 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

Product Catalogue. February We mean progress. PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping

Product Catalogue. February We mean progress. PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping Product Catalogue February 2019 PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping We mean progress. Table of contents Table of contents 1 Uponor Design Services

More information

Product Catalogue. July We mean progress. PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping

Product Catalogue. July We mean progress. PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping Product Catalogue July 2018 PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping We mean progress. Table of contents Table of contents 1 Uponor Design Services and

More information

Equivalent Length of Fittings

Equivalent Length of Fittings Equivalent Length of Fittings This section provides the equivalent length of piping pressure loss for several ProPEX fittings. The equivalent length is used to approximate the impact the fittings have

More information

Suction fittings for use in swimming pools, wading pools, spas, hot tubs, and other aquatic facilities.

Suction fittings for use in swimming pools, wading pools, spas, hot tubs, and other aquatic facilities. IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

Wirsbo hepex Tubing, 5/16" to 2" Coils Submittal information Revision I: Sept. 18, 2018 Project information

Wirsbo hepex Tubing, 5/16 to 2 Coils Submittal information Revision I: Sept. 18, 2018 Project information Wirsbo hepex Tubing, 5/16" to 2" Coils Revision I: Sept. 18, 2018 1 ProPEX is a registered trademark of ProPEX is a trademark of Crosslinked polyethylene PEX-a Engel method 0.22 BTU/h/ft/ F 200 F at 80

More information

Radiant heating and cooling Pre-insulated piping

Radiant heating and cooling Pre-insulated piping Product Catalog July 2017 PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping Table of contents Upgrade to Uponor 3 Uponor Design Services and Technical Support...6

More information

EVALUATION SUBJECT: PUSH FIT FITTINGS DIVISION: PLUMBING SECTION: DOMESTIC WATER PIPING. Report Holder:

EVALUATION SUBJECT: PUSH FIT FITTINGS DIVISION: PLUMBING SECTION: DOMESTIC WATER PIPING. Report Holder: ICC-ES Report PMG-1149 Reissued 08/2017 This report is subject to renewal 08/2018 EVALUATION SUBJECT: PUSH FIT FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 11 16 DOMESTIC WATER PIPING Report Holder:

More information

Effective Date: October 2017 Void After: October Product: Ceramic Plumbing Fixtures File No. 2467

Effective Date: October 2017 Void After: October Product: Ceramic Plumbing Fixtures File No. 2467 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

Product Catalogue. July PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping

Product Catalogue. July PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping Product Catalogue July 2016 PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping Table of contents Uponor begins with you 3 Optimized for mobile 5 Uponor Design Services

More information

AQUIFER DISTRIBUTION LTD. SASKATOON PH (306) FAX (306) REGINA PH (306) FAX (306) UPONOR AQUAPEX PIPE

AQUIFER DISTRIBUTION LTD. SASKATOON PH (306) FAX (306) REGINA PH (306) FAX (306) UPONOR AQUAPEX PIPE UPONOR AQUAPEX PIPE Sec 15-32 F1040500 449 0104 0500 1/2" X 100' WHITE AQUAPEX PIPE 0.68 F1040750 449 0104 0750 3/4" X 100' WHITE AQUAPEX PIPE 1.32 F1041000 449 0104 1000 1" X 100' WHITE AQUAPEX PIPE 2.32

More information

Effective Date: May Rev. 6/18/2018- Void After: May Product: Plumbing Fixture Fittings File No. 3489

Effective Date: May Rev. 6/18/2018- Void After: May Product: Plumbing Fixture Fittings File No. 3489 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

Ecoflex pre-insulated pipe energy efficiency made easy

Ecoflex pre-insulated pipe energy efficiency made easy E c o f l e x C o m p l e t e Catalog Supplement June 2010 Hydronic heating, cooling and potable-water distribution Fast, easy installations Energy-efficient Flexible, durable Custom-cut, long lengths

More information

PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping

PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping Product Catalog February 2017 PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping See inside for our newly reduced prices on PEX-a pipe supports, brass valves and

More information

PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping

PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping Product Catalog July 2016 PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping Table of contents Uponor begins with you 3 Optimized for mobile 5 Uponor Design Services

More information

INSERT FITTINGS INSERT FITTINGS

INSERT FITTINGS INSERT FITTINGS Insert Tee Insert x Female Tee Insert Elbow Insert x Male Elbow Insert Coupling Insert x Male Adapter Insert x Female Adapter Insert Plug POLY and NYLON FITTINGS For use with Poly Tubing Fitting 1/2 3/4

More information

EVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS DIVISION: PLUMBING SECTION: SANITARY WASTE AND VENT PIPING.

EVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS DIVISION: PLUMBING SECTION: SANITARY WASTE AND VENT PIPING. ICC-ES Report PMG-1407 Reissued 10/2017 This report is subject to renewal 10/2018 EVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 13 16 SANITARY WASTE AND VENT

More information

APRIL Flawlessly moving water to provide the ultimate in comfort, safety and convenience for residential and commercial applications.

APRIL Flawlessly moving water to provide the ultimate in comfort, safety and convenience for residential and commercial applications. Product Catalogue APRIL 2010 Radiant Heating and Cooling Systems Pre-insulated Pipe Systems Fire Sprinkler Systems Plumbing Systems Flawlessly moving water to provide the ultimate in comfort, safety and

More information

Product Catalog. Flawlessly moving water to provide the ultimate in comfort, safety and convenience for residential and commercial applications.

Product Catalog. Flawlessly moving water to provide the ultimate in comfort, safety and convenience for residential and commercial applications. Product Catalog APRIL 2009 Radiant Heating and Cooling Systems Plumbing Systems Fire Safety Systems Pre-insulated Pipe Systems Flawlessly moving water to provide the ultimate in comfort, safety and convenience

More information

IAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC PURPOSE

IAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC PURPOSE INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC 157-20067 1 PURPOSE 1.1 The purpose of this standard is to establish an acceptable standard

More information

PLUMBING, FIRE SAFETY, AND RADIANT HEATING AND COOLING SYSTEMS INSTRUCTIONAL GUIDE. Making ProPEX Connections

PLUMBING, FIRE SAFETY, AND RADIANT HEATING AND COOLING SYSTEMS INSTRUCTIONAL GUIDE. Making ProPEX Connections PLUMBING, FIRE SAFETY, AND RADIANT HEATING AND COOLING SYSTEMS INSTRUCTIONAL GUIDE Making ProPEX Connections Table of Contents Making ProPEX Connections....................... General ProPEX Connection

More information

SHARKBITE. PEX Plumbing a Better Home

SHARKBITE. PEX Plumbing a Better Home SHARKBITE PEX Plumbing a Better Home Benefits of SharkBite PEX PROUDLY AMERICAN MADE Health/Safety No glue, solder, or solvents required for the connection process, which keeps potentially dangerous chemicals

More information

INSERT PRESSURE FITTINGS PRODUCTS PRICE LIST PRICE GROUP DISCOUNT MULTIPLIER DESCRIPTION 05 PVC INSERT FITTINGS

INSERT PRESSURE FITTINGS PRODUCTS PRICE LIST PRICE GROUP DISCOUNT MULTIPLIER DESCRIPTION 05 PVC INSERT FITTINGS PRICE GROUP DESCRIPTION 05 PVC INSERT FITTINGS DISCOUNT MULTIPLIER Phone: (315) 451-1100 or (800) 776-2266 Fax: (800) 729-3299 7652 Morgan Road Liverpool, New York 13090 PRODUCTS INSERT PRESSURE FITTINGS

More information

PN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12

PN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12 PN LINE PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN

More information

MATERIALS FOR PLUMBING SYSTEMS FITTING AND INSTALLATION GUIDE

MATERIALS FOR PLUMBING SYSTEMS FITTING AND INSTALLATION GUIDE MATERIALS FOR PLUMBING SYSTEMS FITTING AND INSTALLATION GUIDE THINK GLOBALLY, ACT LOCALLY CONTENTS Propex DZR fittings and pex 2 Why depend on Propex hot and cold piping system 3 Cross linked polyethylene

More information

California Lead Plumbing Law Devices and Components

California Lead Plumbing Law Devices and Components IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

Level 1. Certificate of Conformity. Australian Certification Services Pty Ltd grants to the WaterMark User: Uponor GmbH. Trading as UPONOR Q & E

Level 1. Certificate of Conformity. Australian Certification Services Pty Ltd grants to the WaterMark User: Uponor GmbH. Trading as UPONOR Q & E Level 1 Certificate of Conformity Australian Certification Services Pty Ltd grants to the WaterMark User: Uponor GmbH Trading as UPONOR Q & E the right to use the WaterMark as shown above in conjunction

More information

Submittal Package. Viega MegaPress Fitting System. Chilled Water. Hydronic Heating. Fire Protection. Low Pressure Steam. Compressed Air (no oil)

Submittal Package. Viega MegaPress Fitting System. Chilled Water. Hydronic Heating. Fire Protection. Low Pressure Steam. Compressed Air (no oil) Viega MegaPress Fitting System Chilled Water Hydronic Heating Fire Protection Low Pressure Steam Compressed Air (no oil) Industrial Gases Vacuum 1 of 11 Viega MegaPress Fitting System Viega MegaPress is

More information

PRICE GROUP DISCOUNT MULTIPLIER DESCRIPTION 05 PVC INSERT FITTINGS PRODUCTS PRICE LIST PVC INSERT PRESSURE FITTINGS

PRICE GROUP DISCOUNT MULTIPLIER DESCRIPTION 05 PVC INSERT FITTINGS PRODUCTS PRICE LIST PVC INSERT PRESSURE FITTINGS PRICE GROUP DESCRIPTION 05 PVC INSERT FITTINGS DISCOUNT MULTIPLIER PRODUCTS PVC INSERT PRESSURE FITTINGS PVC INSERT FITTINGS RECOMMENDED INSTALLATION RECOMMENDED INSTALLATION PROCEDURES INSERT (BARBED)

More information

CONNECTION > Super-rapid fittings Series 6000 GENERAL DATA. Fitting with connecting tube. Sprint

CONNECTION > Super-rapid fittings Series 6000 GENERAL DATA. Fitting with connecting tube. Sprint Super-rapid fittings for plastic tubes Series 6000 Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3, M5, M6, M7), BSP (G1/8, G1/, G3/8, G1/2, G3/), BSPT (R1/8,

More information

SOLUTION ASTM F1960. Sioux Chief Tubing. Mr. PEX Tubing. Sioux Chief PowerPEX. Wolverine Brass WOLV-XPEX. Milwaukee Expansion Tools

SOLUTION ASTM F1960. Sioux Chief Tubing. Mr. PEX Tubing. Sioux Chief PowerPEX. Wolverine Brass WOLV-XPEX. Milwaukee Expansion Tools ASTM SOLUTION Sioux Chief Tubing Mr. PEX Tubing Sioux Chief PowerPEX Wolverine Brass WOLV-XPEX Milwaukee Expansion Tools Phone: 1-800-523-5130 Fax: 1-800-338-1867 www.plumbmaster.com Phone: 1-800-944-9292

More information

STC. Push-In Fittings & Polyurethane Tubing. Fine Quality. Precision Engineered Advanced Design. Excellent Prices

STC. Push-In Fittings & Polyurethane Tubing. Fine Quality. Precision Engineered Advanced Design. Excellent Prices Precision Engineered Advanced Design Push-In Fittings & Polyurethane Tubing Catalog: PUB 2012 PUB 07 FIT STC Push-In Fittings & Polyurethane Tubing Fine Quality Excellent Prices A 1 connects fluid power

More information

CONNECTION SYSTEM Includes Push-Fit and Barb Products and PEX Tubing

CONNECTION SYSTEM Includes Push-Fit and Barb Products and PEX Tubing 1 1-877-700-4242 1-877-700-4242 The CONNECTION SYSTEM Includes Push-Fit and Barb Products and PEX Tubing Contents Introduction 2-3 Push-Fit Fittings 4-6 Stops and Fixture Supply Fittings 7 Push-Fitting

More information

PVC FASTTAP SADDLES for IPS Mains. Main Size OUTLET 1 FPT 3/4 CTS (7/8 OD) COMPRESSION 1 CTS (1 1/8 OD) COMPRESSION 3/4 IPS COMPRESSION

PVC FASTTAP SADDLES for IPS Mains. Main Size OUTLET 1 FPT 3/4 CTS (7/8 OD) COMPRESSION 1 CTS (1 1/8 OD) COMPRESSION 3/4 IPS COMPRESSION PVC FASTTAP SADDLES PVC FASTTAP SADDLES for IPS Mains THE ULTIMATE CONNECTION OUTLET 3/4 IPS FEMALE SLIP OR 1 IPS MALE SLIP SOLVENT WELD 1 IPS FEMALE SLIP SOLVENT WELD 3/4 MPT 1 MPT 3/4 FPT MAIN 13/16

More information

EVALUATION SUBJECT: PUSH FIT FITTINGS DIVISION: PLUMBING SECTION: DOMESTIC WATER PIPING. Report Holder:

EVALUATION SUBJECT: PUSH FIT FITTINGS DIVISION: PLUMBING SECTION: DOMESTIC WATER PIPING. Report Holder: ICC-ES Report PMG-1256 Reissued 10/2017 This report is subject to renewal 06/2018 EVALUATION SUBJECT: PUSH FIT FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 11 16 DOMESTIC WATER PIPING Report Holder:

More information

No Lead Pex Fittings. Price List LT-NLPF1015 Effective Date: October 1, 2015 Supersedes April 25, 2014 Price List

No Lead Pex Fittings. Price List LT-NLPF1015 Effective Date: October 1, 2015 Supersedes April 25, 2014 Price List Pex Fittings Price List LT-NLPF1015 Effective Date: October 1, 2015 Supersedes April 25, 2014 Price List Third Party Certified / Forged Brass Legend Brass PEX Fittings are dezincification resistant and

More information

IAPMO IS PUBLIC REVIEW DRAFT Thrust Blocking for Rubber Gasketed and Solvent Cement Joints

IAPMO IS PUBLIC REVIEW DRAFT Thrust Blocking for Rubber Gasketed and Solvent Cement Joints IAPMO IS 33-2019 PUBLIC REVIEW DRAFT Thrust Blocking for Rubber Gasketed and Solvent Cement Joints IAPMO Standard IAPMO IS 33 2019 Published: Month Year Published by International Association of Plumbing

More information

Effective Date: October Rev. 1/29/2018- Void After: October Product: Lead Free Plumbing Products File No. 6544

Effective Date: October Rev. 1/29/2018- Void After: October Product: Lead Free Plumbing Products File No. 6544 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

Originally Issued: 10/08/2010 Revised: 10/27/2017 Valid Through: 10/31/2018

Originally Issued: 10/08/2010 Revised: 10/27/2017 Valid Through: 10/31/2018 ITW BUILDING COMPONENTS GROUP INC. ITW ALPINE HANGERS AND ANCHORS CSI Section: 06 05 23 Wood, Plastic and Composite Fastenings 1.0 RECOGNITION ITW Alpine Hangers and Anchors recognized in this report has

More information

Cryogenic Liquid Ultimate Liquid Cylinder Hose

Cryogenic Liquid Ultimate Liquid Cylinder Hose Cryogenic Liquid Ultimate Liquid Cylinder Hose Flexible Components brand liquid cylinder hose is considered the highest quality liquid cylinder hose on the market. It effectively transfers cryogenic liquids

More information

FITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI

FITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI Jetstream offers a wide variety of fittings with various connection types to fit your 20,000 psi application needs. The standard connection types, Type M, MP, and MP Tube lance, are available in standard

More information

Barbed Fittings. The World Standard. Dubl-Barb Fittings. Hose Barb Fittings. Compact One-piece Economical Reusable Use with Polyethylene Tubing

Barbed Fittings. The World Standard. Dubl-Barb Fittings. Hose Barb Fittings. Compact One-piece Economical Reusable Use with Polyethylene Tubing Barbed Fittings zfc05 ubl-barb Fittings Compact One-piece Economical Reusable Use with Polyethylene Tubing Hose Barb Fittings All Brass Construction Straight and etric Threads Beaded & Standard Hose Barbs

More information

CPVC Transition Fittings - Female Adapter. CPVC X LEAD FREE BRASS Lead Free Max working pressure F ASTM D 2846

CPVC Transition Fittings - Female Adapter. CPVC X LEAD FREE BRASS Lead Free Max working pressure F ASTM D 2846 CPVC Transition Fittings - Female Adapter STD4703BTLF12 1/2 CPVC X 1/2 FIP 25 250 CPVC Transition Fittings - Female Adapter STD4703BTLF34 3/4 CPVC X 3/4 FIP 25 250 CPVC Transition Fittings - Female Adapter

More information

Effective Date: July 2018 Void After: July Product: Plumbing Fixture Fittings File No. 4155

Effective Date: July 2018 Void After: July Product: Plumbing Fixture Fittings File No. 4155 IAPMO Researh and Testing, In. is a produt ertifiation body whih tests and inspets samples taken from the supplier's stok or from the market or a ombination of both to verify ompliane to the requirements

More information

BSI BSI 5200 THE NEW CAST 60 FITTINGS AN EASY ASSEMBLY A KNOWN PRODUCT, SAFE AND RELIABLE AVAILABLE IN CARBON AND STAINLESS STEEL

BSI BSI 5200 THE NEW CAST 60 FITTINGS AN EASY ASSEMBLY A KNOWN PRODUCT, SAFE AND RELIABLE AVAILABLE IN CARBON AND STAINLESS STEEL THE NEW CAST 60 FITTINGS AN EASY ASSEMBLY A KNOWN PRODUCT, SAFE AND RELIABLE AVAILABLE IN CARBON AND STAINLESS STEEL 55 THEORY OF OPERATION The CAST S.p.A. fitting according to the norms, is a mechanical

More information

EVALUATION SUBJECT: DIVISION: HEATING, VENTILATING AND AIR CONDITIONING (HVAC) SECTION: HVAC DUCTS AND CASINGS.

EVALUATION SUBJECT: DIVISION: HEATING, VENTILATING AND AIR CONDITIONING (HVAC) SECTION: HVAC DUCTS AND CASINGS. ICC-ES Report PMG-1171 Reissued 11/2018 This report is subject to renewal 11/2019 EVALUATION SUBJECT: UNDERGROUND SINGLE WALL & DOUBLE WALL INSULATED DUCT FOR HVAC DIRECT BURIAL APPLICATIONS AND UNDERGROUND

More information

Prestolok PLM Metal Push-to-Connect Fittings

Prestolok PLM Metal Push-to-Connect Fittings Prestolok PM Metal Push-to-Connect ittings To meet your technical and environment requirements, Parker s Prestlok PM fittings offers the robustness, reliability and resistance to industrial fluids for

More information

-Proline Polypropylene Single Wall Piping

-Proline Polypropylene Single Wall Piping EFFECTIVE: 6/01/11 Industrial Piping Systems Dimensional Guide #PDIM Proline Super Proline Single Chemical Wall Grade Piping PVDF System -Proline Single Wall Piping s 3 r z s www.asahi-america.com Dimensions

More information

Water Hammer Arrestors

Water Hammer Arrestors Water Hammer rrestors watts.com What is Water Hammer? T he noise from banging pipes is caused by shocks of high speed water flowing in the piping system when a fixture is suddenly closed. Sudden stoppage

More information

Flexible & Intelligent

Flexible & Intelligent Flexible & Intelligent The flexible copper tube cuprotherm CTX tubes are copper tubes with a firmly adherent coating. Due to their structure they can be easily processed and are characterized by a flexibility

More information

Process Filtration From Pure to Sterile

Process Filtration From Pure to Sterile From Pure to Sterile MAIN FEATURES & BENEFITS: Developed for the sterile filtration of air and gases in compressed gas applications as well as venting applications. High dirt holding capacity at a low

More information

High Pressure Equipment Taper Seal Valves, Fittings and Tubing

High Pressure Equipment Taper Seal Valves, Fittings and Tubing igh quipment Taper Seal Valves, ittings and Tubing 0,000 and,000 psi service igh quipment Company has developed the Taper Seal line of products to assure safe and easy plumbing through,000 psi. These needle

More information

Your safety and the safety of others are very important.

Your safety and the safety of others are very important. NATURAL GAS TO PROPANE CONVERSION KIT ALPKT57- INSTALLATION INSTRUCTIONS PROPANE CONVERSION KIT SAFETY... INSTALLATION REQUIREMENTS... Tools and Parts... LP Gas Requirements... Table of Contents INSTALLATION

More information

Storage Systems and Accessories

Storage Systems and Accessories Storage Systems and Accessories High Pressure Air and Inert Gases 4500-6000 PSIG DOT and ASME Cylinders High Pressure Storage Systems If an application requires storage, either in the form of a single

More information

Level 1. Certificate of Conformity. Australian Certification Services Pty Ltd grants to the WaterMark User: Uponor GmbH. Trading as Uponor GmbH

Level 1. Certificate of Conformity. Australian Certification Services Pty Ltd grants to the WaterMark User: Uponor GmbH. Trading as Uponor GmbH Level 1 Certificate of Conformity Australian Certification Services Pty Ltd grants to the WaterMark User: Uponor GmbH Trading as Uponor GmbH the right to use the WaterMark as shown above in conjunction

More information

Forged Brass Bellows Valves

Forged Brass Bellows Valves Forged Brass Bellows Valves Designed Specifically For High Purity Gas Service Size Range - 0.625" to 4.125" Outer Diameter Size Product Features: Forged Brass Bodies - No Sand Castings Clean Area Assembled

More information

PRESSURE REGULATORS GAS PRESSURE REDUCING

PRESSURE REGULATORS GAS PRESSURE REDUCING GAS PRESSURE REDUCING APPLICATION: Regulation of inlet pressure to gas compressors. Control of supply or distribution system pressure CERTIFICATIONS: Canadian Registration Number (CRN): 0C16234.24567890NTY

More information

Originally Issued: 10/08/2010 Revised: 10/30/2015 Valid Through: 10/31/2016

Originally Issued: 10/08/2010 Revised: 10/30/2015 Valid Through: 10/31/2016 EVALUATION SUBJECT: ITW ALPINE HANGERS AND ANCHORS REPORT HOLDER: ITW Building Components Group Inc. 13825 W. Business Center Dr. Unit A Lake Forest, IL 60045 (800) 521-9790 www.alpineitw.com CSI Division:

More information

COPPER TUBE COPPER AND BRASS FITTINGS SOFT DRAWN COPPER CAPILLARY COUPLER CAPILLARY NOMINAL OD WALL ROLL (M) R410A STOCK CODE CAA0020 1/

COPPER TUBE COPPER AND BRASS FITTINGS SOFT DRAWN COPPER CAPILLARY COUPLER CAPILLARY NOMINAL OD WALL ROLL (M) R410A STOCK CODE CAA0020 1/ COPPER TUBE SOFT DRAWN COPPER NOMINAL OD INCHES MM WALL ROLL (M) CAA0020 1/4 6.4 0.81 18 CAA0040 3/8 9.5 0.81 18 CAA0060 1/2 12.7 0.81 18 CAA0080 5/8 15.9 0.81 18 CAA0100 5/8 15.9 1.02 18 CAA0120 3/4 19.1

More information

2 1 6 SHARKBITE C ATA LO G

2 1 6 SHARKBITE C ATA LO G 2 16 SHARKBITE CATALOG INDEX SHARKBITE SHARKBITE SHARKBITE SHARKBITE THE MARK OF QUALITY Lead-Free/Safety* All SharkBite fittings are made of Lead Free DZR Brass and exceed ASSE 1061 Section 1V, 4.1 Materials-Dezincification

More information

VOLUMATIC WATER REGULATOR

VOLUMATIC WATER REGULATOR Introduction The Chore-Time VOLUMATIC regulator is designed to regulate water pressure for Chore-Time Layer and Brood Grow Nipple Watering Systems. There is a model for manual adjustment of the regulator

More information

DIVISION: 06--WOOD AND PLASTICS SECTION: Wood, Plastic and Composite Fastenings

DIVISION: 06--WOOD AND PLASTICS SECTION: Wood, Plastic and Composite Fastenings DIVISION: 06--WOOD AND PLASTICS SECTION: 060523 -- Wood, Plastic and Composite Fastenings REPORT HOLDER: ITW BUILDING COMPONENTS GROUP, INC. 2400 LAKE ORANGE DRIVE, SUITE 150 ORLANDO, FLORIDA 32837 (800)

More information

High-Purity. Ball Valves

High-Purity. Ball Valves High-Purity s Components MANUFACTURING ASSEMBLY TESTING HP High-Purity s CFOS Applications Cost-effective systems where cleaning for oxygen-grade services are required, such as: Clean-Dry Air (CDA), Oil-Free

More information

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant). Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)

More information

precision pipe fittings

precision pipe fittings Precision Pipe Fittings 1 8 to 1 sizes 316 stainless steel, brass, and exotic materials NPT threads HOKE PO Box 4866 Spartanburg, SC 29305-4866 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com Sales-hoke@circor.com

More information

PRESSURE REGULATORS GAS PRESSURE REDUCING

PRESSURE REGULATORS GAS PRESSURE REDUCING GAS PRESSURE REDUCING APPLICATION: Regulation of inlet pressure to gas compressors. Control of supply or distribution system pressure CERTIFICATIONS: Canadian Registration Number (CRN): 0C16234.24567890NTY

More information

LEAK TROUBLESHOOTING

LEAK TROUBLESHOOTING LEAK TROUBLESHOOTING If you suspect that your TMC isolation system is leaking (most often evidenced by going through air/nitrogen tanks too quickly), this guide will help you to find and fix the problem.

More information

The Duopex Gas. to make every job quick and easy. it provides a revolutionary alternative for the professional plumber and 02_DUOPEX GAS GAS MANUAL

The Duopex Gas. to make every job quick and easy. it provides a revolutionary alternative for the professional plumber and 02_DUOPEX GAS GAS MANUAL duopex gas manual The Duopex Gas pipe and fitting system is designed to make every job quick and easy. it provides a revolutionary alternative for the professional plumber and gasfitter. 02_DUOPEX GAS

More information

Test pumps. Pressure sources. Good reasons for proper and reliable calibration

Test pumps. Pressure sources. Good reasons for proper and reliable calibration Test pumps Pressure is one of the most commonly measured quantities in engineering, which is why exact and reliable pressure measurement is especially important. However, the characteristics of the even

More information

TECHNICAL DATA. Trimpac 244a. September 16, 2013

TECHNICAL DATA. Trimpac 244a. September 16, 2013 September 16, 2013 Trimpac 244a 1. DEsCrIpTION DESCRIPTION TRIMPAC Model B-1 and B-1B is a factory-assembled trim package with an electric release module in a metal enclosure. The standard trim normally

More information

Technifit. Union Bulkhead Flow Controller. Fractional & Metric. Push-to-Connect Fittings. March 2006

Technifit. Union Bulkhead Flow Controller. Fractional & Metric. Push-to-Connect Fittings. March 2006 Technifit TM Push-to-Connect Fittings March 2006 Male Female Elbow Tee Union Bulkhead Flow Controller Fractional & Metric PO Box 335 12740 State Route 4 Milford Center, Ohio 43045-0335 USA Phone: 937.349.4055

More information

High Pressure Equipment Medium Pressure Valves, Fittings and Tubing

High Pressure Equipment Medium Pressure Valves, Fittings and Tubing igh Pressure quipment Medium Pressure Valves, ittings and Tubing service igh Pressure quipment Company has developed a line of Medium Pressure products to assure safe and easy plumbing through. These needle

More information

High Pressure Equipment Medium Pressure Valves, Fittings and Tubing

High Pressure Equipment Medium Pressure Valves, Fittings and Tubing igh Pressure quipment Medium Pressure Valves, ittings and Tubing service igh Pressure quipment Company has developed a line of Medium Pressure products to assure safe and easy plumbing through. These needle

More information

ABS DWV FITTINGS BOW INDUSTRIAL CORPORATION

ABS DWV FITTINGS BOW INDUSTRIAL CORPORATION JANUARY 31, 2011 SUPERCEDES ABS-0111 ASTM D2661 BOW INDUSTRIAL CORPORATION CHAMPLAIN, NY USA TEL: 800.852.8527 info@bow-group.com FAX: 800.526.5668 www.bow-group.com JANUARY 31, 2011 Page 1 COUPLING (Hub

More information

MODEL MN-PWV PRESSURIZED WATER VESSEL ASSEMBLY OPERATING MANUAL

MODEL MN-PWV PRESSURIZED WATER VESSEL ASSEMBLY OPERATING MANUAL MODEL MN-PWV PRESSURIZED WATER VESSEL ASSEMBLY OPERATING MANUAL Prepared by CR Manning Edited by SC Woidtke Rev August 22, 2011 PRESSURIZED WATER VESSEL OPERATING MANUAL 1. Background 1.1 The Pressurized

More information

Scubagaskets catalogue

Scubagaskets catalogue Scubagaskets catalogue 111 O-ring Dimensions *New Products Product Codes METRIC SYSTEM Product Codes METRIC SYSTEM I.D. C/S O.D. I.D. C/S O.D. 001 0,74 1,02 2,78 211 20,22 3,53 27,28 1,95 X 1.00* 1,95

More information

Speed control assembly model A-1

Speed control assembly model A-1 Pressure Regulation 533a 1. DESCRIPTION The Viking Speed Control Assembly provides adjustment of the opening speed of Viking Deluge Valves, and adjustment of both the opening and closing speed of Viking

More information

NEW PRODUCT Effective Date: April 15th, 2015

NEW PRODUCT Effective Date: April 15th, 2015 Full Freight Allowed: Order any quantity of the new valves or fittings on this sheet and receive FFA on the first order! Any Legend item may be added to the order. Full Freight Allowance applicable on

More information

QUICK CONNECT FOR 2.0, 4.0 & 5.0 GASES

QUICK CONNECT FOR 2.0, 4.0 & 5.0 GASES BROEN LAB QUICK CONNECT FOR 2.0, 4.0 & 5.0 ES BROEN LAB QUICK CONNECT FOR 2.0, 4.0 & 5.0 ES BROEN LAB QUICK CONNECT FOR 2.0, 4.0 & 5.0 ES LAB TABLE OF CONTENTS Content Page Table of Content 2 BROEN-LAB

More information

COMPRESSION TUBE FITTINGS

COMPRESSION TUBE FITTINGS COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM LET-LOK TUBE FITTINGS DESCRIPTION The HAM-LET GROUP has produced high quality tube and pipe LET-LOK HOW DOES IT WORK? A HAM-LET has gained an

More information

Hydraulic comparison test pump Models CPP1000-X, CPP1600-X

Hydraulic comparison test pump Models CPP1000-X, CPP1600-X Calibration Hydraulic comparison test pump Models CPP1000-X, CPP1600-X WIKA data sheet CT 91.12 for further approvals see page 2 Applications Calibration service companies and service industry Maintenance

More information

Scubagaskets catalogue

Scubagaskets catalogue Scubagaskets catalogue O-ring Dimensions *New Products Product Codes 001 1,95 X 1.00* 002 003 004 2,20 X 1,00* RO* 005 I.D.mm 0,74mm 1,95mm 1,07mm 1,42mm 2,20mm 2,40mm 2,57mm METRIC SYSTEM C/Smm O.D.mm

More information

CAST IRON VALVES FLOAT VALVE

CAST IRON VALVES FLOAT VALVE CAST IRON VALVES FLOAT VALVE NETAFIM CAST IRON VALVES FLOAT VALVE INLINE 25-400MM ANGLE 50-100MM SPECIFICATIONS Manufactured to ISO 9001 Available Valve sizes INLINE Flanged 50mm to 600mm & Threaded 19mm

More information

BROEN-LAB UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM BROEN-LAB UNIFLEX TM FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM PREMIUM LAB

BROEN-LAB UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM BROEN-LAB UNIFLEX TM FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM PREMIUM LAB BROEN-LAB UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM LAB TABLE OF CONTENTS Content Page Table of Content 2 Product Overview 3 BROEN-LAB-LAB UniFlex TM 4-5 Fittings for Non-burnig 2.0 Gases/Vacuum

More information

SIZING AND CAPACITIES OF GAS PIPING

SIZING AND CAPACITIES OF GAS PIPING SIZING AND CAPACITIES OF GAS PIPING A.1 General piping considerations. The first goal of determining the pipe sizing for a fuel gas piping system is to make sure that there is sufficient gas pressure at

More information

Vertical and Horizontal Bladder Tanks

Vertical and Horizontal Bladder Tanks DATA SHEET Vertical and Horizontal Tanks Application The ANSUL bladder tank is one component in a balanced pressure proportioning system. Its operation requires no external power other than a pressurized

More information

High Pressure Iron (HPI) Recertification Guidelines & Procedures

High Pressure Iron (HPI) Recertification Guidelines & Procedures Page 1 of 5 HPI Shop 6201 Andrews Hwy Odessa, Tx 79762 Ph: 432-362-1818 Fx: 432-362-3118 Howard Supply Company www.howard-supply.com High Pressure Iron (HPI) Recertification Guidelines & Procedures Page

More information

INSTALLATION GUIDE Gas Rangetops

INSTALLATION GUIDE Gas Rangetops INSTALLATION GUIDE Gas Rangetops Contents Wolf Gas Rangetops........................... 3 Safety Instructions............................ 4 Gas Rangetop Specifications.................... 5 Gas Rangetop

More information

Operation Manual. Carbon Filtration Industrial Drive, Orlinda, TN fax

Operation Manual. Carbon Filtration Industrial Drive, Orlinda, TN fax Operation Manual Carbon Filtration 615-654-4441 sales@specialtyh2o.com 615-654-4449 fax TABLE OF CONTENTS Section 1 GENERAL 1.1 Warnings and Cautions... 1 1.2 Theory of Operation... 2 1.3 System Illustration...

More information

MUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5.

MUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5. Installation Instructions manual MUELLER table of contents PAGE A-20814 Wall Type General Information 2 Technical Data/ Dimensions Installation 4-5 Maintenance 6 Parts 7 Indicator Post! WARNING: 1. Read

More information

Pilot Assembly Motor Valve Stem Assembly Upstream Pressure Downstream Pressure Motor Valve Diaphragm Pressure. Adjusting Screw.

Pilot Assembly Motor Valve Stem Assembly Upstream Pressure Downstream Pressure Motor Valve Diaphragm Pressure. Adjusting Screw. GAS PRESSURE REDUCING BALANCED APPLICATIONS: Regulation of inlet pressure to gas compressors and control of supply or distribution system pressures where the pressure to the regulator varies significantly

More information

PRESSURE REGULATORS GAS BACK PRESSURE NON VENTING

PRESSURE REGULATORS GAS BACK PRESSURE NON VENTING GAS BACK PRESSURE NON VENTING APPLICATION: Vent lines or pressure regulation on separators, heater treaters, compressor stations, gas gathering and distribution systems where it is desired that no gas

More information

MANUAL: Jumbo Gate Valve

MANUAL: Jumbo Gate Valve MANUAL: Jumbo Gate Valve INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE Read instruction manual before use. Operation of this device without understanding the manual and receiving proper training is a

More information

Bourdon tube pressure gauge, stainless steel For extremely low ambient temperatures down to -70 C Model PG23LT, with case filling

Bourdon tube pressure gauge, stainless steel For extremely low ambient temperatures down to -70 C Model PG23LT, with case filling Pressure Bourdon tube pressure gauge, stainless steel For extremely low ambient temperatures down to -70 C Model PG23LT, with case filling WIKA data sheet PM 02.22 for further approvals see page 3 Applications

More information