G r a d e 1 2 D A d v a n c e d M i l l w o r k
|
|
|
- Scott Kennedy
- 5 years ago
- Views:
Transcription
1 G r a d e 1 2 D A d v a n c e d M i l l w o r k
2
3 G r a d e 1 2 D : A d v a n c e d M i l l w o r k Course Description Carpentry 12D: Advanced Millwork is intended for students transitioning from the carpentry subject area. Curriculum content provides for an overview and the independent application of the process of layout and assembly for millwork. Topics include QQ QQ QQ QQ QQ independent layout and assembly of millwork (e.g., furniture, cabinetry) shaping and processing of rough lumber craftsmanship selection of wood types and characteristics including hardwoods and softwoods selection of sheet goods and panel products Students in the course will apply safety procedures, employability skills, and career development skills independently. Students will continue to develop their knowledge, skills, and attitudes in the areas of sustainability and in new and emerging technologies in building construction specifically related millwork. Cross-curricular learning outcomes, which include those in essential trade math, the science of construction, and the interpretation of construction documents, are to be integrated into the learning activities of the course. The learning outcomes are organized by Technology Fundamentals (F), Technology Skills (S), and Professional Practice (P) strands. For instructional purposes, the sequence of learning outcomes and the learning outcomes included in each unit of study can vary based on the projects within the course. Carpentry Goal 1: Describe the building process from plans to product. GLO 1.1 Interpret blueprints, plans, and sketches. SLO 12D.F Interpret drawings to identify the components, materials, and joinery techniques. SLO 12D.F Describe the impact hardware has on the layout, based on the drawing. SLO 12D.F Relate the various views (e.g., plans, elevation, sections, details) on a set of drawings to advanced millwork. SLO 12D.S Reproduce a full-size drawing from a scale drawing including joining techniques and fastening methods. Grade 12D: Advanced Millwork 3
4 GLO 1.2 Determine material requirements. SLO 12D.F Describe lumber and panel products industry terminology that applies to the ordering process (e.g., board feet, lineal footage, rough versus dressed stock). SLO 12D.S Create a cutting list based on drawings. SLO 12D.S Estimate materials requirements based on a cutting list and considering maximum yield, aesthetics, and cost. SLO 12D.S Select wood and panel products for millwork. GLO 1.3 Apply the construction sequence. SLO 12D.F Select a plan of procedure for a millwork project. SLO 12D.S Implement a plan of procedure for a millwork project. Carpentry Goal 2: Perform the basic skills and procedures of carpentry. GLO 2.1 Lay out projects. SLO 12D.F Describe layout methods commonly used in millwork. SLO 12D.S Select tools required for layout. SLO 12D.S Test accuracy of layout tools. SLO 12D.S Verify template for accuracy. SLO 12D.S Apply layout and cutting marks for millwork. GLO 2.2 Measure materials and spaces. SLO 12D.F Identify methods to verify dimensions, squareness, angle, radius, and diameter for millwork. SLO 12D.F Describe techniques to verify machining equipment for accuracy. SLO 12D.S Transfer and verify measurements for millwork. SLO 12D.S Apply techniques to verify machining equipment for accuracy. GLO 2.3 Prepare material (e.g., cutting, machining, shaping). SLO 12D.F Describe the wood machining process (e.g., S4S). SLO 12D.F Describe the process for preparing panel products for assembly. SLO 12D.F Describe processes for joinery. SLO 12D.S Apply the wood machining process (e.g., S4S, rough cut to length, oversize pre-machining). 4 Grade 12D: Advanced Millwork
5 SLO 12D.S Apply the process for preparing panel products for assembly. SLO 12D.S Select and apply a joinery process. GLO 2.4 Assemble projects. SLO 12D.F Describe components and sequence of assembly for millwork. SLO 12D.S Apply sequence of assembly for millwork. Carpentry Goal 3: Describe and use the materials of construction. GLO 3.1 Describe wood and wood products. SLO 12D.F Describe types of wood and panel products used for millwork. SLO 12D.S Select wood and panel products based on characteristics and aesthetics. GLO 3.2 Describe non-wood products. SLO 12D.F Describe non-wood products for millwork based on aesthetics and functionality. SLO 12D.S Consider aesthetics and functionality when selecting nonwood products. GLO 3.3 Describe fasteners, adhesives, sealants, and fillers. SLO 12D.F Describe fastening methods considering aesthetics, strength, and functionality. SLO 12D.S Select and install fasteners used in millwork. SLO 12D.S Select and use adhesives, sealants, and fillers (e.g., wood glue, contact cement, caulking) used in millwork. Carpentry Goal 4: Describe and apply the common tools and equipment used in carpentry. GLO 4.1 Identify and use hand tools. SLO 12D.F Describe tools required for millwork layout. SLO 12D.F Describe hand tools (e.g., block plane, chisels, handsaw, mallet) required for millwork. SLO 12D.S Select and apply hand tools required for millwork. SLO 12D.S Care for and maintain hand tools. Grade 12D: Advanced Millwork 5
6 GLO 4.2 Identify and use portable power tools. SLO 12D.F Describe portable power tools for millwork. SLO 12D.F Describe storage and handling procedures for portable power tools. SLO 12D.S Select and apply portable power tools for millwork. SLO 12D.S Apply storage and handling procedures for portable power tools. GLO 4.3 Identify and use stationary power tools. SLO 12D.F Describe tools used for stationary power tool calibration. SLO 12D.F Describe stationary power tools for millwork. SLO 12D.S Apply the tools used for stationary power tool calibration. SLO 12D.S Select and apply stationary power tools for millwork. GLO 4.5 Identify material-handling equipment. SLO 12D.F Describe material-handling equipment. Carpentry Goal 5: Describe and apply transferable cross-curricular knowledge and skills as they relate to carpentry. GLO 5.1 Apply construction mathematics/geometry. SLO 12D.F Research price lists for materials required for millwork. SLO 12D.F Identify formulas to verify dimensions, squareness, angle, radius, and diameter for millwork. SLO 12D.S Estimate material requirements for millwork. GLO 5.2 Read, interpret, and communicate information from construction documents. SLO 12D.F Describe the relationship between the specification sheet and the blueprint, plan, or drawing. GLO 5.3 Describe the performance and characteristics of materials. SLO 12D.F Describe the considerations for wood selection for millwork. SLO 12D.F Differentiate among panel products for millwork. GLO 5.4 Identify local environmental factors. SLO 12D.F Describe the impact humidity (e.g., high versus low humidity, equilibrium moisture content) has on millwork. 6 Grade 12D: Advanced Millwork
7 Carpentry Goal 6: Consider sustainability as it pertains to carpentry. GLO 6.1 Describe the sustainability practices of construction industries (e.g., forestry, concrete) and their impact on the environment. SLO 12D.F Describe the impact the manufacturing of construction materials has on the environment, cost, and limited resources. SLO 12D.F Identify considerations in material selection related to sustainable development. SLO 12D.F Identify environmental practices for the recycling of lumber offcuts. SLO 12D.F Describe the environmental impact of products (e.g., paints, finishes) used in millwork. GLO 6.2 Describe and apply efficient material usage practices. SLO 12D.F Describe how the manufacturing process (e.g., CNC) has an impact on raw material usage. SLO 12D.F Describe processes used to recycle materials related to millwork. Carpentry Goal 7: Explain the evolution of carpentry, including its technological progression and emerging trends. GLO 7.1 Explain developing trends in construction. SLO 12D.F Describe developing trends in the millwork industry. GLO 7.2 Identify examples of emerging technologies in construction. SLO 12D.F Describe evolving technology of tools, materials, and processes in the millwork industry. Carpentry Goal 8: Demonstrate a knowledge of and ability to recognize and apply appropriate health and safety requirements and practices to maintain a safe workplace. GLO 8.1 Describe and apply safety procedures and knowledge of health and safety rights and responsibilities. SLO 12D.P Describe and demonstrate adherence to safe work practices when using construction materials, processes, tools, and equipment. SLO 12D.P Describe types of fires and fire-control equipment, as well as fire prevention and control strategies. SLO 12D.P Describe emergency evacuation and response procedures. Grade 12D: Advanced Millwork 7
8 SLO 12D.P Identify hazards associated with and the specialized training required for unique construction situations (e.g., excavation, confined spaces, fall protection, chemicals). SLO 12D.P Describe hazards associated with work in climatically extreme conditions. SLO 12D.P Assess hazards (e.g., electrical, ergonomic, materialhandling, chemical) related to construction materials, processes, tools, and equipment, and describe the precautions that should be taken to avoid these hazards. SLO 12D.P Describe the effects of electrical current on the human body and on construction equipment. SLO 12D.P Demonstrate ergonomically correct procedures to avoid injury (e.g., stress, strain). SLO 12D.P Identify ways hazardous materials can enter the body. SLO 12D.P Locate the first aid and eyewash station. SLO 12D.P Assess situations and select appropriate personal protective equipment required for particular construction materials, processes, and tools. GLO 8.2 Describe and follow health and safety laws and regulations as they relate to carpentry. SLO 12D.P Describe the WHMIS guidelines, and use, handle, and store materials accordingly. SLO 12D.P Describe and comply with health and safety legislation and practices for the construction industry (e.g., Workplace Safety and Health Act). SLO 12D.P Describe the rights and responsibilities of employees, employers, and supervisors, including the right to refuse process. SLO 12D.P Describe the reporting process for injuries. SLO 12D.P Describe basic First Aid/CPR requirements and employer responsibilities. Carpentry Goal 9: Demonstrate employability skills required in carpentry. GLO 9.1 Demonstrate fundamental employability skills. SLO 12D.P Consider how employability skills can be transferred among school, work, and daily life. SLO 12D.P Communicate using the language of carpentry. SLO 12D.P Share information through written and oral communication. 8 Grade 12D: Advanced Millwork
9 SLO 12D.P Understand and appreciate the points of view of others. SLO 12D.P Access, analyze, and apply information resources to solve carpentry problems. SLO 12D.P Analyze and evaluate problems, and recommend creative and innovative solutions. SLO 12D.P Implement solutions and assess for effectiveness. GLO 9.2 Demonstrate personal management skills. SLO 12D.P Interact with people, problems, and situations with honesty, integrity, and personal ethics. SLO 12D.P Demonstrate interest, initiative, and effort. SLO 12D.P Plan and manage time to complete tasks/projects within stated deadlines. SLO 12D.P Demonstrate responsibility and leadership by being accountable for your actions and those of your group. SLO 12D.P Adapt to change and compromise in new situations and suggest alternative ways to complete tasks/projects. SLO 12D.P Demonstrate the willingness to continuously learn and to teach, mentor, or coach others. SLO 12D.P Develop a personal learning plan. GLO 9.3 Demonstrate teamwork skills. SLO 12D.P Recognize and respect people s diversity, individual differences, and perspectives when working in a group. SLO 12D.P Lead or support a group when appropriate to achieve the goals of the group. SLO 12D.P Contribute to and work within the dynamics of the group to achieve a goal. SLO 12D.P Independently plan, design, and carry out a project or task from start to finish, monitoring for agreed-upon work standards along the way. SLO 12D.P Readily provide assistance to other students and to teachers to complete a task/project. Carpentry Goal 10: Follow the ethical and legal standards (e.g., national building code) in carpentry. GLO 10.1 Identify and follow local and national building codes. SLO 12D.P Describe commonly used standards for millwork. Grade 12D: Advanced Millwork 9
10 GLO 10.3 Follow the ethical expectations of professional carpenters. SLO 12D.P Describe and follow generally accepted building practices. Carpentry Goal 11: Describe career opportunities in the construction industry. GLO 11.1 Identify apprenticeship and post-secondary opportunities related to carpentry. SLO 12D.P Identify careers, post-secondary opportunities, and industries related to millwork. SLO 12D.P Describe a variety of career opportunities in carpentry and the education and training required for each. SLO 12D.P Describe the process of completing Manitoba s carpentry apprenticeship program. GLO 11.2 Identify career opportunities available to carpenters across industries. SLO 12D.P Identify various sectors and occupational areas in which carpenters are involved. SLO 12D.P Research a career related to carpentry and communicate its educational and employment pathways and challenges. GLO 11.3 Appreciate the working conditions and dynamics of the construction industry. SLO 12D.P Describe the working conditions and dynamics of the construction industry. 10 Grade 12D: Advanced Millwork
A p p l i e d C a r p e n t r y ( 1 2 D )
9 1 9 4 A p p l i e d C a r p e n t r y ( 1 2 D ) 40S/40E/40M A Carpentry Course 9 1 9 4 A p p l i e d C a r p e n t r y ( 1 2 D ) 4 0 S / 4 0 E / 4 0 M Course Description In this course, students will
D a m a g e a n a l y s i s a n D s t r u c t u r a l r e p a i r s ( 1 2 a )
9 0 3 3 D a m a g e a n a l y s i s a n D s t r u c t u r a l r e p a i r s ( 1 2 a ) 40S/40E/40M A Collision Repair and Refinishing Technology Course 9 0 3 3 : D a m a g e a n a l y s i s a n D s t r
M e t a l D e s i g n / F a b r i c a t i o n & O x y - A c e t y l e n e P r o c e d u r e s ( 1 1 A )
8 4 1 4 M e t a l D e s i g n / F a b r i c a t i o n & O x y - A c e t y l e n e P r o c e d u r e s ( 1 1 A ) 30S/30E/30M A Welding Technology Course 8 4 1 4 M e t a l D e s i g n / F a b r i c a t
I n t r o d u c t I o n t o c o l l I s I o n r e p a I r a n d r e f I n I s h I n g t e c h n o l o g y ( 1 0 )
9 0 2 9 I n t r o d u c t I o n t o c o l l I s I o n r e p a I r a n d r e f I n I s h I n g t e c h n o l o g y ( 1 0 ) 20S/20E/20M A Collision Repair and Refinishing Technology Course 9 0 2 9 : I n
I n t r o d u c t i o n t o H e a v y D u t y E q u i p m e n t T e c h n o l o g y ( 1 0 )
8 6 7 3 I n t r o d u c t i o n t o H e a v y D u t y E q u i p m e n t T e c h n o l o g y ( 1 0 ) 20S/20E/20M A Heavy Duty Equipment Technician Course 8 6 7 3 : I n t r o d u c t i o n t o H e a v y
A u t o m o t i v e m e t A l s A n d W e l d i n g ( 1 1 B )
9 0 3 1 A u t o m o t i v e m e t A l s A n d W e l d i n g ( 1 1 B ) 30S/30E/30M A Collision Repair and Refinishing Technology Course 9 0 3 1 : A u t o m o t i v e m e t A l s A n d W e l d i n g ( 1
B a s i c G M A W ( M I G ) P r o c e d u r e s ( 1 1 B )
8 4 7 4 B a s i c G M A W ( M I G ) P r o c e d u r e s ( 1 1 B ) 30S/30E/30M A Welding Technology Course 8 4 7 4 B a s i c G M A W ( M I G ) P r o c e d u r e s ( 1 1 B ) 3 0 S / 3 0 E / 3 0 M Course
W e l d - O n a n d B O l t - O n P a n e l R e P l a c e m e n t ( 1 2 B )
9 0 3 4 W e l d - O n a n d B O l t - O n P a n e l R e P l a c e m e n t ( 1 2 B ) 40S/40E/40M A Collision Repair and Refinishing Technology Course 9 0 3 4 : W e l d - O n a n d B O l t - O n P a n e
A u t o m o t i v e E l e c t r i c a l S y s t e m s ( 1 2 A )
8 7 0 0 A u t o m o t i v e E l e c t r i c a l S y s t e m s ( 1 2 A ) 40S/40E/40M An Automotive Technology Course 8 7 0 0 : A u t o m o t i v e E l e c t r i c a l S y s t e m s ( 1 2 A ) 4 0 S / 4
A p p l i e d H e a v y D u t y E q u i p m e n t T e c h n o l o g y ( 1 2 D )
8 7 0 4 A p p l i e d H e a v y D u t y E q u i p m e n t T e c h n o l o g y ( 1 2 D ) 40S/40E/40M A Heavy Duty Equipment Technician Course 8 7 0 4 : A p p l i e d H e a v y D u t y E q u i p m e n t
C N C M a c h i n i n g ( 1 2 D )
8 8 5 8 C N C M a c h i n i n g ( 1 2 D ) 40S/40E/40M A Machining Technology Course 8 8 5 8 : C N C M a c h i n i n g ( 1 2 D ) 4 0 S / 4 0 E / 4 0 M Course Description Students develop skills and knowledge
A d v a n c e d G M A W ( M I G ) W e l d i n g P r o c e s s e s a n d P r o c e d u r e s ( 1 2 A )
8 4 8 7 A d v a n c e d G M A W ( M I G ) W e l d i n g P r o c e s s e s a n d P r o c e d u r e s ( 1 2 A ) 40S/40E/40M A Welding Technology Course 8 4 8 7 A d v a n c e d G M A W ( M I G ) W e l d
B a s i c S M A W ( A R C ) P r o c e d u r e s ( 1 1 C )
8 4 8 6 B a s i c S M A W ( A R C ) P r o c e d u r e s ( 1 1 C ) 30S/30E/30M A Welding Technology Course 8 4 8 6 B a s i c S M A W ( A R C ) P r o c e d u r e s ( 1 1 C ) 3 0 S / 3 0 E / 3 0 M Course
F u n d a m e n t a l s o f G r a p h i c D e s i g n
9 1 3 6 F u n d a m e n t a l s o f G r a p h i c D e s i g n 20S/20E/20M A Graphic Design Course 9 1 3 6 : F u n d a m e n t a l s o f G r a p h i c D e s i g n 2 0 S / 2 0 E / 2 0 M Course Description
M i l l i n g O p e r a t i o n s I ( 1 1 C )
8 8 5 4 M i l l i n g O p e r a t i o n s I ( 1 1 C ) 30S/30E/30M A Machining Technology Course 8 8 5 4 : M i l l i n g O p e r a t i o n s I ( 1 1 C ) 3 0 S / 3 0 E / 3 0 M Course Description Students
B a s i c H a i r c u t t i n g a n d T h e r m a l S t y l i n g ( 1 0 C )
8 3 1 4 B a s i c H a i r c u t t i n g a n d T h e r m a l S t y l i n g ( 1 0 C ) 20S/20E/20M A Hairstyling Course 8 3 1 4 : B a s i c H a i r c u t t i n g a n d T h e r m a l S t y l i n g ( 1 0 C
C o d i n g f o r i n t e r a C t i v e d i g i t a l M e d i a
9 0 9 7 C o d i n g f o r i n t e r a C t i v e d i g i t a l M e d i a 30S/30E/30M An Interactive Digital Media Course 9 0 9 7 : C o d i n g f o r i n t e r a C t i v e d i g i t a l M e d i a 3 0 S
E x p l o r a t i o n o f J e w e l l e r y / M e t a l s m i t h i n g ( 9 )
8 7 6 8 E x p l o r a t i o n o f J e w e l l e r y / M e t a l s m i t h i n g ( 9 ) 15S/15E/15M 10S/10E/10M A Jewellery/Metalsmithing Course 8 7 6 8 : E x p l o r a t i o n o f J e w e l l e r y / M
P r o j e c t M a n a g e M e n t f o r I n t e r a c t I v e D I g I t a l M e D I a
9 1 0 0 P r o j e c t M a n a g e M e n t f o r I n t e r a c t I v e D I g I t a l M e D I a 40S/40E/40M An Interactive Digital Media Course 9 1 0 0 : P r o j e c t M a n a g e M e n t f o r I n t e
V e g e t a b l e s, F u n g i, S t a r c h e s, a n d F a r i n a c e o u s P r o d u c t s ( 1 1 C )
8 7 9 4 V e g e t a b l e s, F u n g i, S t a r c h e s, a n d F a r i n a c e o u s P r o d u c t s ( 1 1 C ) 30S/30E/30M A Culinary Arts Course 8 7 9 4 : V e g e t a b l e s, F u n g i, S t a r c h
I n t e r m e d i a t e H a i r c u t t i n g ( 1 1 A ) 30S/30E/30M. a n d B a r b e r i n g T e c h n i q u e s. A Hairstyling Course
8 3 1 6 I n t e r m e d i a t e H a i r c u t t i n g a n d B a r b e r i n g T e c h n i q u e s ( 1 1 A ) 30S/30E/30M A Hairstyling Course 8 3 1 6 : I n t e r m e d i a t e H a i r c u t t i n g a n
F o r m a l W e a r D e s i g n a n d C o n s t r u c t i o n ( 1 2 B )
9 1 3 1 F o r m a l W e a r D e s i g n a n d C o n s t r u c t i o n ( 1 2 B ) 40S/40E/40M A Fashion Design and Technology Course 9 1 3 1 : F o r m a l W e a r D e s i g n a n d C o n s t r u c t i o
C l o t h i n g a n d T e x t i l e s ( 7 ) A Middle Years Human Ecology Course
0 4 8 6 C l o t h i n g a n d T e x t i l e s ( 7 ) A Middle Years Human Ecology Course Human Ecology Clothing & Clothing & Textiles Family Family Studies Studies the progression of Home Economics & Food
R e l a t e d S a l o n S e r v i c e s ( 1 0 D )
8 3 1 5 R e l a t e d S a l o n S e r v i c e s ( 1 0 D ) 20S/20E/20M A Hairstyling Course 8 3 1 5 : R e l a t e d S a l o n S e r v i c e s ( 1 0 D ) 2 0 S / 2 0 E / 2 0 M Course Description Curriculum
P a t i s s e r i e a n d B a k i n g ( 1 1 B )
8 7 9 3 P a t i s s e r i e a n d B a k i n g ( 1 1 B ) 30S/30E/30M A Culinary Arts Course 8 7 9 3 : P a t i s s e r i e a n d B a k i n g ( 1 1 B ) 3 0 S / 3 0 E / 3 0 M Course Description This course
S p a S e r v i c e s ( 1 2 D )
9 0 7 8 S p a S e r v i c e s ( 1 2 D ) 40S/40E/40M An Esthetics Course 9 0 7 8 : S p a S e r v i c e s (1 2 D) 4 0 S / 4 0 E / 4 0 M Course Description The emphasis in this course is on aromatherapy,
K n i t w e a r D e s i g n a n d C o n s t r u c t i o n ( 1 1 A )
9 1 2 6 K n i t w e a r D e s i g n a n d C o n s t r u c t i o n ( 1 1 A ) 30S/30E/30M A Fashion Design and Technology Course 9 1 2 6 : K n i t w e a r D e s i g n a n d C o n s t r u c t i o n 3 0 S
Grades 9 to 12 Heavy Duty Equipment Technician. Manitoba Technical-Vocational Curriculum Framework of Outcomes
Grades 9 to 12 Heavy Duty Equipment Technician Manitoba Technical-Vocational Curriculum Framework of Outcomes G r a d e s 9 t o 1 2 H e a v y D u t y E q u i p m e n t T e c h n i c i a n Manitoba Technical-Vocational
M o d e r n a n d C l a s s i c D e s s e r t s, a n d P l a t i n g T e c h n i q u e s ( 1 2 B )
8 3 7 4 M o d e r n a n d C l a s s i c D e s s e r t s, a n d P l a t i n g T e c h n i q u e s ( 1 2 B ) 40S/40E/40M A Baking and Pastry Arts Course 8 3 7 4 : M o d e r n a n d C l a s s i c D e s s
B r e a k f a s t a n d D a i r y ( 1 2 B )
8 7 9 6 B r e a k f a s t a n d D a i r y ( 1 2 B ) 40S/40E/40M A Culinary Arts Course 8 7 9 6 : B r e a k f a s t a n d D a i r y ( 1 2 B ) 4 0 S / 4 0 E / 4 0 M Course Description This course is intended
C a k e s, F i l l i n g s, I c i n g s,
8 3 5 8 C a k e s, F i l l i n g s, I c i n g s, a n d D e c o r a t i o n s ( 1 1 C ) 30S/30E/30M A Baking and Pastry Arts Course 8 3 5 8 : C a k e s, F i l l i n g s, I c i n g s, a n d D e c o r a
C l o t h i n g a n d T e x t i l e s ( 8 ) A Middle Years Human Ecology Course
0 4 8 6 C l o t h i n g a n d T e x t i l e s ( 8 ) A Middle Years Human Ecology Course Human Ecology Clothing & Clothing & Textiles Family Family Studies Studies the progression of Home Economics & Food
A i r c r a f t E l e c t r i c a l S y s t e m s ( 1 2 B )
8 5 4 9 A i r c r a f t E l e c t r i c a l S y s t e m s ( 1 2 B ) 40S/40E/40M An Aviation and Aerospace Technologies Course 8 5 4 9 : A i r c r a f t E l e c t r i c a l S y s t e m s ( 1 2 B ) 4 0
Y e a s t - D o u g h P r o d u c t s ( 1 1 B )
8 3 3 9 Y e a s t - D o u g h P r o d u c t s ( 1 1 B ) 30S/30E/30M A Baking and Pastry Arts Course 8 3 3 9 : Y e a s t - D o u g h P r o d u c t s ( 1 1 B ) 3 0 S / 3 0 E / 3 0 M Course Description This
INDUSTRY AND TECHNOLOGY Institutional (ILO), Program (PLO), and Course (SLO) Alignment
INDUSTRY AND TECHNOLOGY Institutional (ILO), Program (PLO), and Course (SLO) Program: Construction Technology Number of Courses: 22 Date Updated: 09.18.2014 Submitted by: SueEllen Warren, ext. 4519 Renee
E x p l o r a t i o n o f B a k i n g a n d P a s t r y A r t s ( 9 )
8 2 3 1 E x p l o r a t i o n o f B a k i n g a n d P a s t r y A r t s ( 9 ) 15S/15E/15M 10S/10E/10M A Baking and Pastry Arts Course 8 2 3 1: E x p l o r a t i o n o f B a k i n g a n d P a s t r y A
CURRICULUM ASSESSMENT CHECKLIST: MOTOR VEHICLE BODY REPAIRER - LEVEL 1
CURRICULUM ASSESSMENT CHECKLIST: MOTOR VEHICLE BODY REPAIRER - LEVEL 1 Apprenticeship Manitoba prescribes time and content specific curriculum standards for technical training in the trade of Motor Vehicle
Assembling and testing fluid power systems
Unit 020 Assembling and testing fluid power systems Level: 2 Credit value: 14 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover
Required Courses. Total Hours 39
Public Sector Safety & Health Fundamentals Certificate Program for Construction Participants must complete a minimum of seven courses, comprised of required and elective courses, that include a minimum
Producing Aircraft Detail Assemblies. Ofqual unit reference number (code) Organisation Reference M/508/4691. Unit Level Level 2. Unit Sub Level GLH 64
Unit Title Ofqual unit reference number (code) Organisation Reference Producing Aircraft Detail Assemblies M/508/4691 QU051487 Unit Level Level 2 Unit Sub Level None GLH 64 Unit Credit Value 14 Sector
UNIT TITLE: CLEAN PUBLIC AREAS, FACILITIES AND EQUIPMENT NOMINAL HOURS: 60 hours
UNIT TITLE: CLEAN PUBLIC AREAS, FACILITIES AND EQUIPMENT NOMINAL HOURS: 60 hours UNIT NUMBER: D1.HHK.CL3.02 UNIT DESCRIPTOR: This unit deals with skills and knowledge required to clean public areas, facilities
Course Outline of Record Los Medanos College 2700 East Leland Road Pittsburg CA (925)
New Course OR Existing Course Instructor(s)/Author(s): David Biles Subject Area/Course No.: PE-042 Units:.5-1 Course Name/Title: Golf Discipline(s): Physical Education Pre-Requisite(s): None Co-Requisite(s):
Lifesaving Society National Lifeguard Instructor Candidate Self-Assessment
Lifesaving Society National Lifeguard Instructor Candidate Self-Assessment This self-assessment presents the learning outcomes that instructor candidates must achieve in order to pass the Lifesaving Society
Level 3 Diploma in Moving Loads in Construction. Qualification Specification
Qualification Specification ProQual 2017 Contents Page Introduction 3 Qualification profile 3 Qualification structure 4 Centre requirements 4 Support for candidates 5 Assessment 5 Internal quality assurance
SAFETY AND OSHA GUIDELINE CURRICULUM
SAFETY AND OSHA GUIDELINE CURRICULUM CertiLearn - Non-Industrial OSHA Safety Guidelines These courses are ideal for any small business or non-industrial environment Safety Basics In this course you will
2. Teaches in a logical and organized manner U NI S G E N/R. 3. Prepares lesson plans which are current and being followed U NI S G E N/R
Appendix D BROOKINGS SCHOOL DISTRICT 5-1 TEACHER PERFORMANCE EVALUATION GCOAE Name of Teacher School Year Assignment(s) Each performance area will be rated on a FIVE ITEM Scale or marked as not rated.
Office of Human Resources. HVAC Mechanic CJ2539
Office of Human Resources HVAC Mechanic CJ2539 General Statement of Duties Performs full performance skilled trades level work in the maintenance, repair, and installation of a variety of HVAC equipment
Developing Physical and Mental Capacity
o o o Invasion games- Basketball KS3 Use a range of tactics and strategies to overcome opponents in direct competition through team and individual games Analyse performances compared to previous ones and
OSHA Respirable Crystalline Silica Standard: Tips for Developing a Compliance Strategy June 2016
RiskTopics OSHA Respirable Crystalline Silica Standard: Tips for Developing a Compliance Strategy June 2016 This RiskTopic outlines the new OSHA standard for respirable crystalline silica and provides
Computer Integrated Manufacturing (PLTW) TEKS/LINKS Student Objectives One Credit
Computer Integrated Manufacturing (PLTW) TEKS/LINKS Student Objectives One Credit Suggested Time Ranges First Six Weeks History of Manufacturing PFD 1.1(A) The student will describe why and how manufacturing
Mini Tennis Coaching
COMHAIRLE NÁISIÚNTA NA gcáilíochtaí GAIRMOIDEACHAIS NATIONAL COUNCIL FOR VOCATIONAL AWARDS Draft Module Descriptor Mini Tennis Coaching Level 5 N22970 www.fetac.ie 1 Title Mini Tennis Coaching 2 Code N22970
SEMFWE3-33 SQA Unit Code HF2X 04 Cutting and shaping materials using portable thermal cutting equipment
Cutting and shaping materials using portable thermal cutting equipment Overview This standard identifies the competencies you need for cutting and shaping plate (3mm thickness and above), rolled sections,
Describe Flammable Gas Measurement
Training Module Describe Flammable 100% 90% C 80% No Combustion 70% 60% 50% 40% 30% 20% UEL B Combustion No Combustion 10% 0% LEL A Human Development HDC Human Development All rights reserved. No part
Elko County Human Services Employment Opportunity Announcement
Position opens: Through Summer Elko County Human Services Employment Opportunity Announcement POSITION: Jackpot Recreation Center Seasonal Lifeguard SALARY: $8.25 per hour not to exceed 1039 hours per
Office of Human Resources. Facility Maintenance Technician CJ2523
Office of Human Resources Facility Maintenance Technician CJ2523 General Statement of Duties Performs full performance journey level work in one trades area and performs standard level work in a variety
AFL Outer East POSITION DESCRIPTION
Position Dimensions & Key Relationships Objective of Role Organisation Environment AFL Outer East POSITION DESCRIPTION Position: Netball Development Manager (Part Time) Department: Operations Date: September
Understanding the world of voluntary environmental schemes
Understanding the world of voluntary environmental schemes Organisation for Economic Co-operation and Development 1 Overview of presentation Characterising the world of environmental labels Crunching data
Document No: NGSB/SHO-001
Page : 1 of 13 COURSE TITLE : SAFETY AND HEALTH OFFICER (JKKP IS 127/438/3-84) COURSE CODE : SHO COURSE DURATION : 22 DAYS COURSE LEVEL : BASIC COURSE CATEGORY : COMPETENCY COURSE FEE : RM 3800.00 EXAMINATION
Football Intermediate Unit
Football Intermediate Unit Date: Teacher: Class: Student Name Tut Grp SEN Start Working above (+) Working below (- ) Comments Assessment Initial Assessment LEVEL Below Average Above Expectations Some children
Erie County Technical School Facility Maintenance Technology Duty/Task List
1 of 13 This program includes instruction in Center for Construction Education and Research (NCCER) Content Areas, Titles and Task Statements 00 FUNDAMENTALS OF FACILITY MAINTENANCE TECHNOLOGY A BASIC
Traffic Control: An Overview. May 2016
Traffic Control: An Overview May 2016 Introduction Traffic Control as an Occupation Why Traffic Control? The Planning Process Communication Legislation TCM Committee Training Additions to 2014 TCM Work
Effective Workplace Inspections
Effective Workplace Inspections Why are workplace inspections important? 3600-Safety Inspections-General Information Workplace inspections help prevent injuries and illnesses. Through critical examination
ONLINE SAFETY TRAINING PROGRAM SUMMARY
Act First Safety provides best-in-class online/e-learning opportunities for employers and workers. With a selection of 17 programs, including eight (8) programs in French. Choosing Act First Safety is
Cutting and shaping materials using thermal cutting equipment
Unit 824 Cutting and shaping materials using thermal cutting equipment UAN: H/600/5883 Level: Level 2 Credit value: 14 GLH: 64 Relationship to NOS: This unit has been derived from national occupational
Release: 1. UEPOPL002A Licence to operate a reciprocating steam engine
Release: 1 UEPOPL002A Licence to operate a reciprocating steam engine UEPOPL002A Licence to operate a reciprocating steam engine Modification History Not applicable. Unit Descriptor Unit Descriptor 1)
Working safely in an engineering environment
Unit 001 Working safely in an engineering environment Level: 2 Credit value: 5 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to work
Performance Task # 1
Performance Task # 1 Goal: Arrange integers in order. Role: You are a analyzing a Julie Brown Anderson s dive. Audience: Reader of article. Situation: You are interviewing for a job at a sports magazine.
Department of Defense Education Activity Host Nation Program Standards and Student Performance Outcomes Grades K - 6 Contents
Department of Defense Education Activity Host Nation Program Standards and Student Performance Outcomes Grades K - 6 Contents Mission Forward Title Page Table of Contents Standards for the Host Nation
Registration Opens: 1/24/ Late registration: 2/24/2018 Registration deadline: 3/1/2018
North Dakota 4-H Equine Program State 4-H Horse Demonstration Rules North Dakota State University Family Life Center, Fargo April 8th, 2018 - registration @ 7:15 am Start @ 8:00 am STATE SPECIALIST: Leigh
SEMCW2-10 Testing quartz watches
Overview This unit identifies the competences you need to carry out tests on quartz watches and watch movements, in accordance with approved procedures. You will be required to carry out tests on a range
ACHPER CONFERENCE 2017 Engaging Students in Basketball: 3 on 3
ACHPER CONFERENCE 2017 Engaging Students in Basketball: 3 on 3 Looking for a bank of activities to engage your students in 3 on 3 basketball? Well look no further. This session will guide you through differentiated
N/A. Yes. Students are expected to review and understand all areas of the course outline.
Course Outline School: Department: Course Title: Business Business Management Service Operations Management Course Code: OMGT 334 Course Hours/Credits: 56 Prerequisites: BUSN 129, OMGT 129 Co-requisites:
Motor Vehicle Body Repairer (Metal and Paint) Level 1
Level 1 A1 Orientation I: The Structure & Scope of Trade Learning Duration: 7 hours 7 hours 0 hours Jobsite learning and teaching have long been fundamental to trade-practice, including its safety, health,
SEMIC05 Installing mechanical equipment
Overview This unit identifies the competences you need to install mechanical equipment, in accordance with approved procedures. This will require you to survey the site for the proposed installation, and
The NDP platform has seven key commitments in this election; I hope that your members can take a moment to review them at
Halifax Chamber of Commerce Attn.: Valerie Payn, President and CEO September 25th, 2013 Via email: to valerie@halifaxchamber.com Dear Ms Payn: On behalf of Premier Darrell Dexter, Leader of the New Democratic
Lockout/Tagout Safety Policy
University of North Carolina Wilmington Environmental Health & Safety Workplace Safety Lockout/Tagout Safety Policy GENERAL The UNCW Environmental Health & Safety Department (EH&S) is authorized by UNCW
Course Title: Industrial Safety in Electronics Engineering Technology Number of Credits: 3 B.A. B.S. B.A.S A.A. A.S. Degree Type
GENERAL INFORMATION Name: Diane King Phone #: 77021 Course Prefix/Number: ETI3704 Course Title: Industrial Safety in Electronics Engineering Technology Number of Credits: 3 B.A. B.S. B.A.S A.A. A.S. Degree
OHSISA TRAINING COURSE FOR WHO? DETAILS & INFORMATION
The OHS Institute of South Africa offers a full range of consulting services pertaining to Safety, Health, Environment, Risk, and Quality (SHERQ) for all sectors of industry. This includes a full range
Minimum standard of competence for electro-technical officers (STCW Reg III/6) Electrical, electronic and control engineering at the operational level
Minimum standard of for electro-technical officers (STCW Reg III/6) Function: Electrical, electronic and control engineering at the operational level Monitor the Basic understanding of the Examination
NCCP Swimming 301 Course Summary
1 INTRODUCTION 3:30 This module provides coaches with an overview of the 301 course, what is expected of the coaches and most importantly what coaches can expect to get out of attending the 301 course.
Gold Medal Profile TABLE OF CONTENTS
Gold Medal Profile TABLE OF CONTENTS THE CULTURE OF EXCELLENCE... 2 THE ETHOS OF WINNING... 2 THE GOLD MEDAL PROFILE... 2 PRIMARY KPI TRIATHLON PERFORMANCE... 3 SECONDARY KPI SINGLE SPORT PERFORMANCE...
These guidance notes should be used together with the Climbing Wall Development Instructor handbook.
Climbing Wall Development Instructor Guidance for trainers and assessors INTRODUCTION These guidance notes should be used together with the Climbing Wall Development Instructor handbook. and assessors
APPROVED MAIN COURSES
Training in ORP - Wind Sector - Preparation of customised courses for our customers. Delivery of these, and our own and specific courses under the Global Wind Organisation (GWO) Standard Preparation Delivery
Level 2 Diploma in Aerospace and Aviation Engineering (Foundation Competence) ( )
Level 2 Diploma in Aerospace and Aviation Engineering (Foundation Competence) (4605-02) September 2017 Version 3.1 Qualification Handbook Qualification at a glance Subject area Engineering City & Guilds
Electrical, electronic and control engineering at the operational level
STCW Code Table A-III/6 Specification of minimum standard of for electro-technical officers Ref: https://www.edumaritime.net/stcw-code Source: IMO Function: Electrical, electronic and control engineering
Board /Authority Approved Course Hockey Academy 10
Board /Authority Approved Course Hockey Academy 10 North Okanagan Shuswap School District 83 Developed By: Terry Shykora Date Developed: May 2018 School Name: A L Fortune Secondary School Superintendent
Safe work method statements
Information about Safe work method statements How to prepare and use a safe work method statement (SWMS) for high risk construction work (HRCW) and who needs to prepare one. October 2018 Key concepts Hazard
Position Description
Netball Victoria To enrich Victoria Communities through the sport of netball. General Details: Position Title: Organisational Unit: Position Reports To: Position Liaises With: Qualifications: Position
SITE SAFETY SUPERVISOR (SSS)
SITE SAFETY SUPERVISOR (SSS) 1.0 OBJECTIVE At the end of the course, the participant will be able to: Describe the OSH legislative requirements pertaining to construction site; Conduct the risk management
Engaging Club Members
5 Engaging Club Members Key resources for membership include the Membership Development Resource Guide (417) and Club Assessment Tools, an online supplement for analyzing club membership trends. Your club
CAVING REGISTRATION LEVELS AND ASSESSMENT REQUIREMENTS
CAVING REGISTRATION LEVELS AND ASSESSMENT REQUIREMENTS NOLRS VERSION 2.2 October 2009 Outdoor Council of Australia Ph: (08) 9248 6677 1800 660 540 Fax: (08) 9248 5799 Email: nolrs@outdoorcouncil.asn.au
SAFETY AND HEALTH INDUSTRIAL HYGIENE Hazard Communication Program Effective Date: 08/07/14 Standard: 10.1 Document Number: KUSHIH0008 Rev: 01
Introduction: This Hazard Communication (HazCom) Program manual was designed to meet the requirements of OSHA 29 CFR 1910.1200, MSHA 30 CFR Part 47, and all Rio Tinto Kennecott Copper (RTKC) standards.
BSO Plus ANNUAL SAFETY REFRESHER 2015
The BSO Plus Safety Refresher is an annual checkpoint designed from the content in BSO Plus. Completing this refresher is a requirement for the Basic Safety Recertification (BSR) course, so please ensure
NZQA unit standard version 5 Page 1 of 5. Describe, develop, and maintain basic ventilation systems for an underground coal mine
Page 1 of 5 Title Describe, develop, and maintain basic ventilation systems for an underground coal mine Level 4 Credits 15 Purpose People credited with this unit standard are able to: describe the basic
RIBTS Scores * Program. Program RIBTS1 RIBTS2 RIBTS3 RIBTS4 RIBTS5 RIBTS6 RIBTS7 RIBTS8 RIBTS9 RIBTS10 RIBTS11
FEINSTEIN SCHOOL OF EDUCATION AND HUMAN DEVELOPMENT EXIT PORTFOLIO, SPRING 2009 RIBTS ANALYSIS: PROGRAM RIBTS Scores * Program Program RIBTS1 RIBTS2 RIBTS3 RIBTS4 RIBTS5 RIBTS6 RIBTS7 RIBTS8 RIBTS9 RIBTS10
Basketball Packaging. Basketball Packaging. 1 of 10. Copyright 2008, Exemplars, Inc. All rights reserved.
The Bouncing Basketball Company is looking to design a new carton to ship 24 basketballs. Each basketball comes in a box that measures 1 foot on every side, and the company wants to put 24 of these boxes
SEMEMI SQA Unit Code H2AP 04 Carrying out fault location on electrical equipment and circuits
Carrying out fault location on electrical equipment and circuits Overview This unit identifies the competences you need to locate faults on electrical equipment and circuits, in accordance with approved
Great players are willing to give up their own personal achievement for the achievement of the group. It enhances everybody (Kareem Abdul Jabbar).
Basketball Academy Great players are willing to give up their own personal achievement for the achievement of the group. It enhances everybody (Kareem Abdul Jabbar). Basketball is one of the best world-class
RCM CHIEF EXECUTIVE OFFICER & GENERAL SECRETARY Job Description and Person Specification
RCM CHIEF EXECUTIVE OFFICER & GENERAL SECRETARY Job Description and Person Specification PURPOSE AND CONTEXT OF THE ROLE The key purpose of the Chief Executive will be to enhance the RCM s unique position
SKAPP02. Deal with substances hazardous to health. Overview
Overview This standard is about dealing with hazardous substances which are potentially dangerous such as pool chemicals and cleaning agents used in plant pool operations. It includes the transportation,