A p p l i e d C a r p e n t r y ( 1 2 D )
|
|
|
- Irma Stephanie Gibbs
- 5 years ago
- Views:
Transcription
1 A p p l i e d C a r p e n t r y ( 1 2 D ) 40S/40E/40M A Carpentry Course
2
3 A p p l i e d C a r p e n t r y ( 1 2 D ) 4 0 S / 4 0 E / 4 0 M Course Description In this course, students will synthesize knowledge, skills, and attitudes learned in previous courses to complete projects. They will also prepare for Level 1 accreditation with Apprenticeship Manitoba, and demonstrate knowledge of the Trade Safety Awareness Manual. The course also includes all of the objectives found in A1 Orientation I: Structure and Scope of Carpenter, and A2 Trade Safety Awareness from Carpenter Level 1, from Apprenticeship Manitoba. Goal 1: Describe and apply appropriate health and safety practices. GLO 1.1: Describe and apply appropriate health and safety practices. SLO 12D SLO 12D SLO 12D SLO 12D SLO 12D SLO 12D SLO 12D SLO 12D Demonstrate an understanding of and adherence to health and safety practices. Identify safety and health requirements. (A2.1) Identify electrical safety. (A2.3) Identify fire safety. (A2.4) Identify ergonomics. (A2.5) Identify hazards of confined space entry. (A2.6) Identify first aid/cpr. (A2.7) Identify and control hazards. (A2.9) GLO 1.2: Demonstrate knowledge of the Trade Safety Awareness Manual. SLO 12D Explain the importance of trade safety and health in reducing injuries and fatalities to young employees in Manitoba. (TSA 1) SLO 12D Describe the rights and responsibilities of employees, employers, and supervisors under The Workplace Safety and Health Act. (TSA 2) SLO 12D Describe the steps to use in the Right to Refuse process. (TSA 3) SLO 12D Explain how and where to find information on workplace safety and health. (TSA 4) SLO 12D Demonstrate how to handle a potentially dangerous work situation. (TSA 5) SLO 12D Explain the S.A.F.E. acronym. (TSA 6) 9194: Applied Carpentry (12D) 3
4 SLO 12D Define workplace safety and health hazards. (TSA 7) SLO 12D Give examples of trade-specific workplace safety and health hazards. (TSA 8) SLO 12D Give examples of five types of safety and health hazards. (TSA 9) SLO 12D Define workplace safety and health risk. (TSA 10) SLO 12D Give examples of trade-specific workplace safety and health risks. (TSA 11) SLO 12D Explain the principles of hazard recognition and control as they apply to carpentry. (TSA 12) SLO 12D Explain the Workplace Hazardous Material Information System (WHMIS). (TSA 13) SLO 12D Match the WHMIS hazardous materials symbols and their meanings. (TSA 14) SLO 12D Describe the importance of the Material Safety Data Sheets (MSDS). (TSA 15) SLO 12D Describe the importance of using personal protective equipment (PPE). (TSA 16) SLO 12D Demonstrate the proper selection and use of a variety of personal protective equipment and fall protection systems. (TSA 17) SLO 12D Outline the safety principles for working on and around electrical equipment. (TSA 18) SLO 12D Outline the workplace fire safety principles. (TSA 19) SLO 12D Identify the hazards in confined spaces and the preparation needed to work in a confined space. (TSA 20) Goal 2: Demonstrate the identification, installation, and management of materials. GLO 2.1: Demonstrate the identification, installation, and management of materials. Goal 3: Demonstrate the identification, use, and management of tools, equipment, fasteners, and adhesives. GLO 3.1: Demonstrate the identification, use, and management of tools and equipment. SLO 12D Identify types of gas, diesel, and powder-actuated tools and equipment, and material-handling equipment, and describe their applications and procedures for use. (A3.4) (The remainder of this objective is taught in course #9188.) : Applied Carpentry (12D)
5 SLO 12D Describe the procedures used to inspect, maintain, and store gas, diesel, and powder-actuated tools and equipment, and material-handling equipment. (A3.6) (The remainder of this objective is taught in course #9188.) SLO 12D Demonstrate the use of gas, diesel, and powder-actuated tools and equipment, and material-handling equipment. (A3.8) (The remainder of this objective is taught in course #9188.) SLO 12D Identify types of hoarding and describe their purpose and applications, and the associated equipment and materials used to construct hoarding. (B3.5) SLO 12D Identify types of lifting, rigging, and hoisting equipment and accessories, and describe their applications, limitations, and procedures for use. (B3.6) SLO 12D SLO 12D SLO 12D Identify the considerations and procedures used for installing, securing, dismantling, storing, and maintaining temporary access structures. (B3.7) Identify the methods of communication used during lifting, rigging, and hoisting operations, and describe their associated procedures. (B3.10) Identify the considerations when modifying existing scaffold structures and describe the procedures used. (B3.11) GLO 3.2: Demonstrate the identification, use, and management of fasteners and adhesives. SLO 12D Demonstrate the identification, use, and management of fasteners and adhesives. Goal 4: Demonstrate the basic skills of carpentry. GLO 4.1: Demonstrate the skills related to project drawings and specifications. SLO 12D SLO 12D SLO 12D Identify documentation related to modifications of drawings and specifications, and describe their applications. (B2.6) Explain resolution protocols to follow when a conflict is identified within a set of project documents. (B2.8) Demonstrate the literacy skills required to participate fully in the construction or renovation of a structure. 9194: Applied Carpentry (12D) 5
6 GLO 4.2: Demonstrate the carpentry skills related to layout, measurement, and assembly. SLO 12D Demonstrate the process of assembling projects. SLO 12D Demonstrate the layout, measurement, and assembly skills and knowledge required to participate fully in the construction or renovation of a structure. GLO 4.3: Demonstrate the ability to determine elevations and lay out building lines. GLO 4.4: Demonstrate the knowledge and skills associated with concrete foundations. Goal 5: Follow the ethical and legal standards that pertain to carpentry. GLO 5.1: Demonstrate an awareness of the ethical and legal expectations of carpenters. SLO 12D Discuss instances when carpenters performed their responsibilities unethically, along with the ensuing consequences. Goal 6: Demonstrate employability skills. GLO 6.1: Demonstrate employability skills. SLO 12D SLO 12D SLO 12D SLO 12D SLO 12D SLO 12D Demonstrate regular attendance and punctuality. Demonstrate accountability by taking responsibility for own actions. Demonstrate adaptability and effort. Demonstrate the ability to accept and follow direction and feedback. Demonstrate teamwork skills. Demonstrate the ability to stay on task and use time effectively. GLO 6.2: Demonstrate critical thinking skills. SLO 12D Demonstrate the ability to solve complex, multi-stage problems related to the design, construction, and/or renovation of structures : Applied Carpentry (12D)
7 GLO 6.3: Demonstrate respectful interactions with individuals of different cultures. SLO 12D Demonstrate respectful interactions with individuals of different cultures. Goal 7: Demonstrate an awareness of sustainability as it pertains to carpentry. GLO 7.1: Describe the impact of the construction industry on human sustainability and the health and well-being of carpenters. GLO 7.2: Describe the construction industry s sustainability practices and impact on the environment. Goal 8: Demonstrate an understanding of the structure and scope of carpentry. GLO 8.1: Describe the scope of carpentry. SLO 12D Describe the structure and scope of the modern carpenter trade. (A1.1) GLO 8.2: Describe apprenticeship, post-secondary education, and employment opportunities. SLO 12D Describe the Apprenticeship Manitoba carpenter program. (A1.2) SLO 12D Describe special challenges and opportunities regarding apprenticeship training. (A1.3) SLO 12D Demonstrate an awareness of accommodations for apprentices with disabilities. (A1.4) Goal 9: Demonstrate an understanding of the evolution of carpentry, including its technological progression and emerging trends. GLO 9.1: Demonstrate an understanding of the evolution of carpentry, including its technological progression and emerging trends. 9194: Applied Carpentry (12D) 7
8
A d v a n c e d G M A W ( M I G ) W e l d i n g P r o c e s s e s a n d P r o c e d u r e s ( 1 2 A )
8 4 8 7 A d v a n c e d G M A W ( M I G ) W e l d i n g P r o c e s s e s a n d P r o c e d u r e s ( 1 2 A ) 40S/40E/40M A Welding Technology Course 8 4 8 7 A d v a n c e d G M A W ( M I G ) W e l d
B a s i c G M A W ( M I G ) P r o c e d u r e s ( 1 1 B )
8 4 7 4 B a s i c G M A W ( M I G ) P r o c e d u r e s ( 1 1 B ) 30S/30E/30M A Welding Technology Course 8 4 7 4 B a s i c G M A W ( M I G ) P r o c e d u r e s ( 1 1 B ) 3 0 S / 3 0 E / 3 0 M Course
I n t r o d u c t I o n t o c o l l I s I o n r e p a I r a n d r e f I n I s h I n g t e c h n o l o g y ( 1 0 )
9 0 2 9 I n t r o d u c t I o n t o c o l l I s I o n r e p a I r a n d r e f I n I s h I n g t e c h n o l o g y ( 1 0 ) 20S/20E/20M A Collision Repair and Refinishing Technology Course 9 0 2 9 : I n
B a s i c S M A W ( A R C ) P r o c e d u r e s ( 1 1 C )
8 4 8 6 B a s i c S M A W ( A R C ) P r o c e d u r e s ( 1 1 C ) 30S/30E/30M A Welding Technology Course 8 4 8 6 B a s i c S M A W ( A R C ) P r o c e d u r e s ( 1 1 C ) 3 0 S / 3 0 E / 3 0 M Course
I n t r o d u c t i o n t o H e a v y D u t y E q u i p m e n t T e c h n o l o g y ( 1 0 )
8 6 7 3 I n t r o d u c t i o n t o H e a v y D u t y E q u i p m e n t T e c h n o l o g y ( 1 0 ) 20S/20E/20M A Heavy Duty Equipment Technician Course 8 6 7 3 : I n t r o d u c t i o n t o H e a v y
A u t o m o t i v e E l e c t r i c a l S y s t e m s ( 1 2 A )
8 7 0 0 A u t o m o t i v e E l e c t r i c a l S y s t e m s ( 1 2 A ) 40S/40E/40M An Automotive Technology Course 8 7 0 0 : A u t o m o t i v e E l e c t r i c a l S y s t e m s ( 1 2 A ) 4 0 S / 4
M e t a l D e s i g n / F a b r i c a t i o n & O x y - A c e t y l e n e P r o c e d u r e s ( 1 1 A )
8 4 1 4 M e t a l D e s i g n / F a b r i c a t i o n & O x y - A c e t y l e n e P r o c e d u r e s ( 1 1 A ) 30S/30E/30M A Welding Technology Course 8 4 1 4 M e t a l D e s i g n / F a b r i c a t
A u t o m o t i v e m e t A l s A n d W e l d i n g ( 1 1 B )
9 0 3 1 A u t o m o t i v e m e t A l s A n d W e l d i n g ( 1 1 B ) 30S/30E/30M A Collision Repair and Refinishing Technology Course 9 0 3 1 : A u t o m o t i v e m e t A l s A n d W e l d i n g ( 1
G r a d e 1 2 D A d v a n c e d M i l l w o r k
G r a d e 1 2 D A d v a n c e d M i l l w o r k G r a d e 1 2 D : A d v a n c e d M i l l w o r k Course Description Carpentry 12D: Advanced Millwork is intended for students transitioning from the carpentry
D a m a g e a n a l y s i s a n D s t r u c t u r a l r e p a i r s ( 1 2 a )
9 0 3 3 D a m a g e a n a l y s i s a n D s t r u c t u r a l r e p a i r s ( 1 2 a ) 40S/40E/40M A Collision Repair and Refinishing Technology Course 9 0 3 3 : D a m a g e a n a l y s i s a n D s t r
W e l d - O n a n d B O l t - O n P a n e l R e P l a c e m e n t ( 1 2 B )
9 0 3 4 W e l d - O n a n d B O l t - O n P a n e l R e P l a c e m e n t ( 1 2 B ) 40S/40E/40M A Collision Repair and Refinishing Technology Course 9 0 3 4 : W e l d - O n a n d B O l t - O n P a n e
A p p l i e d H e a v y D u t y E q u i p m e n t T e c h n o l o g y ( 1 2 D )
8 7 0 4 A p p l i e d H e a v y D u t y E q u i p m e n t T e c h n o l o g y ( 1 2 D ) 40S/40E/40M A Heavy Duty Equipment Technician Course 8 7 0 4 : A p p l i e d H e a v y D u t y E q u i p m e n t
M i l l i n g O p e r a t i o n s I ( 1 1 C )
8 8 5 4 M i l l i n g O p e r a t i o n s I ( 1 1 C ) 30S/30E/30M A Machining Technology Course 8 8 5 4 : M i l l i n g O p e r a t i o n s I ( 1 1 C ) 3 0 S / 3 0 E / 3 0 M Course Description Students
F u n d a m e n t a l s o f G r a p h i c D e s i g n
9 1 3 6 F u n d a m e n t a l s o f G r a p h i c D e s i g n 20S/20E/20M A Graphic Design Course 9 1 3 6 : F u n d a m e n t a l s o f G r a p h i c D e s i g n 2 0 S / 2 0 E / 2 0 M Course Description
C N C M a c h i n i n g ( 1 2 D )
8 8 5 8 C N C M a c h i n i n g ( 1 2 D ) 40S/40E/40M A Machining Technology Course 8 8 5 8 : C N C M a c h i n i n g ( 1 2 D ) 4 0 S / 4 0 E / 4 0 M Course Description Students develop skills and knowledge
B a s i c H a i r c u t t i n g a n d T h e r m a l S t y l i n g ( 1 0 C )
8 3 1 4 B a s i c H a i r c u t t i n g a n d T h e r m a l S t y l i n g ( 1 0 C ) 20S/20E/20M A Hairstyling Course 8 3 1 4 : B a s i c H a i r c u t t i n g a n d T h e r m a l S t y l i n g ( 1 0 C
C o d i n g f o r i n t e r a C t i v e d i g i t a l M e d i a
9 0 9 7 C o d i n g f o r i n t e r a C t i v e d i g i t a l M e d i a 30S/30E/30M An Interactive Digital Media Course 9 0 9 7 : C o d i n g f o r i n t e r a C t i v e d i g i t a l M e d i a 3 0 S
P r o j e c t M a n a g e M e n t f o r I n t e r a c t I v e D I g I t a l M e D I a
9 1 0 0 P r o j e c t M a n a g e M e n t f o r I n t e r a c t I v e D I g I t a l M e D I a 40S/40E/40M An Interactive Digital Media Course 9 1 0 0 : P r o j e c t M a n a g e M e n t f o r I n t e
I n t e r m e d i a t e H a i r c u t t i n g ( 1 1 A ) 30S/30E/30M. a n d B a r b e r i n g T e c h n i q u e s. A Hairstyling Course
8 3 1 6 I n t e r m e d i a t e H a i r c u t t i n g a n d B a r b e r i n g T e c h n i q u e s ( 1 1 A ) 30S/30E/30M A Hairstyling Course 8 3 1 6 : I n t e r m e d i a t e H a i r c u t t i n g a n
P a t i s s e r i e a n d B a k i n g ( 1 1 B )
8 7 9 3 P a t i s s e r i e a n d B a k i n g ( 1 1 B ) 30S/30E/30M A Culinary Arts Course 8 7 9 3 : P a t i s s e r i e a n d B a k i n g ( 1 1 B ) 3 0 S / 3 0 E / 3 0 M Course Description This course
V e g e t a b l e s, F u n g i, S t a r c h e s, a n d F a r i n a c e o u s P r o d u c t s ( 1 1 C )
8 7 9 4 V e g e t a b l e s, F u n g i, S t a r c h e s, a n d F a r i n a c e o u s P r o d u c t s ( 1 1 C ) 30S/30E/30M A Culinary Arts Course 8 7 9 4 : V e g e t a b l e s, F u n g i, S t a r c h
Grades 9 to 12 Heavy Duty Equipment Technician. Manitoba Technical-Vocational Curriculum Framework of Outcomes
Grades 9 to 12 Heavy Duty Equipment Technician Manitoba Technical-Vocational Curriculum Framework of Outcomes G r a d e s 9 t o 1 2 H e a v y D u t y E q u i p m e n t T e c h n i c i a n Manitoba Technical-Vocational
B r e a k f a s t a n d D a i r y ( 1 2 B )
8 7 9 6 B r e a k f a s t a n d D a i r y ( 1 2 B ) 40S/40E/40M A Culinary Arts Course 8 7 9 6 : B r e a k f a s t a n d D a i r y ( 1 2 B ) 4 0 S / 4 0 E / 4 0 M Course Description This course is intended
F o r m a l W e a r D e s i g n a n d C o n s t r u c t i o n ( 1 2 B )
9 1 3 1 F o r m a l W e a r D e s i g n a n d C o n s t r u c t i o n ( 1 2 B ) 40S/40E/40M A Fashion Design and Technology Course 9 1 3 1 : F o r m a l W e a r D e s i g n a n d C o n s t r u c t i o
K n i t w e a r D e s i g n a n d C o n s t r u c t i o n ( 1 1 A )
9 1 2 6 K n i t w e a r D e s i g n a n d C o n s t r u c t i o n ( 1 1 A ) 30S/30E/30M A Fashion Design and Technology Course 9 1 2 6 : K n i t w e a r D e s i g n a n d C o n s t r u c t i o n 3 0 S
R e l a t e d S a l o n S e r v i c e s ( 1 0 D )
8 3 1 5 R e l a t e d S a l o n S e r v i c e s ( 1 0 D ) 20S/20E/20M A Hairstyling Course 8 3 1 5 : R e l a t e d S a l o n S e r v i c e s ( 1 0 D ) 2 0 S / 2 0 E / 2 0 M Course Description Curriculum
S p a S e r v i c e s ( 1 2 D )
9 0 7 8 S p a S e r v i c e s ( 1 2 D ) 40S/40E/40M An Esthetics Course 9 0 7 8 : S p a S e r v i c e s (1 2 D) 4 0 S / 4 0 E / 4 0 M Course Description The emphasis in this course is on aromatherapy,
E x p l o r a t i o n o f J e w e l l e r y / M e t a l s m i t h i n g ( 9 )
8 7 6 8 E x p l o r a t i o n o f J e w e l l e r y / M e t a l s m i t h i n g ( 9 ) 15S/15E/15M 10S/10E/10M A Jewellery/Metalsmithing Course 8 7 6 8 : E x p l o r a t i o n o f J e w e l l e r y / M
M o d e r n a n d C l a s s i c D e s s e r t s, a n d P l a t i n g T e c h n i q u e s ( 1 2 B )
8 3 7 4 M o d e r n a n d C l a s s i c D e s s e r t s, a n d P l a t i n g T e c h n i q u e s ( 1 2 B ) 40S/40E/40M A Baking and Pastry Arts Course 8 3 7 4 : M o d e r n a n d C l a s s i c D e s s
Module: Permit to work System
Module: Permit to work System Aim: To know about best practice of PTW. It is a procedure designed to ensure that work is carried out in the safest possible way by considering the potential hazards and
E x p l o r a t i o n o f B a k i n g a n d P a s t r y A r t s ( 9 )
8 2 3 1 E x p l o r a t i o n o f B a k i n g a n d P a s t r y A r t s ( 9 ) 15S/15E/15M 10S/10E/10M A Baking and Pastry Arts Course 8 2 3 1: E x p l o r a t i o n o f B a k i n g a n d P a s t r y A
Contractor/Visitor Safety Orientation UNBC
Contractor/Visitor Safety Orientation UNBC 3333 University Way, Prince George, BC V2N 4Z9 Revised: October 2015 For All Emergencies call Security 250-960-7058 ***DO NOT DIAL 911*** Important UNBC Telephone
Y e a s t - D o u g h P r o d u c t s ( 1 1 B )
8 3 3 9 Y e a s t - D o u g h P r o d u c t s ( 1 1 B ) 30S/30E/30M A Baking and Pastry Arts Course 8 3 3 9 : Y e a s t - D o u g h P r o d u c t s ( 1 1 B ) 3 0 S / 3 0 E / 3 0 M Course Description This
C a k e s, F i l l i n g s, I c i n g s,
8 3 5 8 C a k e s, F i l l i n g s, I c i n g s, a n d D e c o r a t i o n s ( 1 1 C ) 30S/30E/30M A Baking and Pastry Arts Course 8 3 5 8 : C a k e s, F i l l i n g s, I c i n g s, a n d D e c o r a
The content of this resource has been generously provided by the AGC Houston, the Associated General Contractors of America.
Construction & Utilities Division Planning Tools The content of this resource has been generously provided by the AGC Houston, the Associated General Contractors of America. Guidelines for Creation of
SAFE WORK METHOD STATEMENT CARPENTER
HOST EMPLOYER DECLARATION I declare the worker/s named on this work authority have been provided with a site specific safety induction that complies with the requirements of the Workplace Health & Safety
CURRICULUM ASSESSMENT CHECKLIST: MOTOR VEHICLE BODY REPAIRER - LEVEL 1
CURRICULUM ASSESSMENT CHECKLIST: MOTOR VEHICLE BODY REPAIRER - LEVEL 1 Apprenticeship Manitoba prescribes time and content specific curriculum standards for technical training in the trade of Motor Vehicle
Safety is a priority at Vault Pipelines.
Safety is a priority at Vault Pipelines. At Vault Pipelines we believe that every incident is preventable and that every task can be completed safely and efficiently. We will achieve this through our cultural
SAFETY AND OSHA GUIDELINE CURRICULUM
SAFETY AND OSHA GUIDELINE CURRICULUM CertiLearn - Non-Industrial OSHA Safety Guidelines These courses are ideal for any small business or non-industrial environment Safety Basics In this course you will
SPECIALIZED ONLINE TRAINING COURSE LIST
SPECIALIZED ONLINE TRAINING COURSE LIST Grainger Online Safety Manager provides you with access to online training courses covering today's most relevant safety topics. The training content is designed
B S Glass Ltd Safety procedures- outsourced Workplaces
B S Glass Ltd Jan 17 B S Glass Ltd Safety procedures- outsourced Workplaces Index - - - - - - - - Page No On Site safety - - - - - - - - - - - - - - - - - - - Content 3. 1.00 Health and Safety Mission
LIGHTHOUSE SAFETY TRAINING 2018
Specialists in Fall Protection, Rescue and Confined Spaces tele (262) 790.1155 fax (262) 783-6211 www.lighthousesafety.com csr@lighthousesafety.com 3620 North 126th Street Brookfield, WI 53005 LIGHTHOUSE
Competency type. positions. All workers (including contractors), higher degree students and volunteers
Appendix A Training Required for Work Health & Safety Training WHS general and/or site/work specific induction of the emergency procedures and assembly areas Local first aid provisions. of hazards and
CONTRACTOR SAFETY INDUCTION HANDBOOK
CONTRACTOR SAFETY INDUCTION HANDBOOK As a valued contractor for Total Group we would ask that you read and carefully consider the details included in this document. Total Group carry out work for a number
New Hire Safety Orientation. Welcome to Flexicrew, our number one priority is you and your safety.
New Hire Safety Orientation Welcome to Flexicrew, our number one priority is you and your safety. 1 New Employee Responsibilities As a contract worker with Flexicrew Staffing, I understand by signing this
Safety Services Guidance. Guidance on: The Provision and Use of Work Equipment Regulations 1998 (PUWER)
Guidance on: The Provision and Use of Work Equipment Regulations 1998 (PUWER) Key word(s) : Work equipment. Using, maintaining and repairing. Information, instruction and supervision. Risk Assessment.
A i r c r a f t E l e c t r i c a l S y s t e m s ( 1 2 B )
8 5 4 9 A i r c r a f t E l e c t r i c a l S y s t e m s ( 1 2 B ) 40S/40E/40M An Aviation and Aerospace Technologies Course 8 5 4 9 : A i r c r a f t E l e c t r i c a l S y s t e m s ( 1 2 B ) 4 0
Course outline: 111 WH&S E101A UEENEEE101A - Occupational Health and Safety regulations, codes and practices in the workplace
RTO Code 41319 Course outline: 111 WH&S E101A UEENEEE101A - Occupational Health and Safety regulations, codes and practices in the workplace Qualification: Applicable to: Unit of competency: Related policies:
C l o t h i n g a n d T e x t i l e s ( 7 ) A Middle Years Human Ecology Course
0 4 8 6 C l o t h i n g a n d T e x t i l e s ( 7 ) A Middle Years Human Ecology Course Human Ecology Clothing & Clothing & Textiles Family Family Studies Studies the progression of Home Economics & Food
ONLINE SAFETY TRAINING PROGRAM SUMMARY
Act First Safety provides best-in-class online/e-learning opportunities for employers and workers. With a selection of 17 programs, including eight (8) programs in French. Choosing Act First Safety is
This subject outlines procedures to prevent accidents or injuries to you and others from inappropriate selection and use of fall protection equipment.
Page 1 of 7 REFERENCES Personal Protective Equipment Standards 1.31 PURPOSE This subject outlines procedures to prevent accidents or injuries to you and others from inappropriate selection and use of fall
Work at height Policy
Work at Policy Introduction This policy procedure outlines the Forces responsibility to provide guidance to all police officers and staff when working at. Many serious incidents involving working at occur
7 Hazard assessment 8 Worker participation 9 Hazard elimination and control
This document is a guideline only. Employers have a responsibility of assessing all applicable occupational health and safety legislation, for the tasks they are performing. Businesses in this industry
London Organising Committee of the Olympic Games and Paralympic Games. 14 June 2010
London Organising Committee of the Olympic Games and Paralympic Games 14 June 2010 London 2012 Olympic and Paralympic Games Volunteer Protocol Title This document shall be known as the London 2012 Olympic
ESSENTIAL SAFETY RESOURCES
ESSENTIAL SAFETY RESOURCES GS-3018 HAZARD IDENTIFICATION AND RISK ASSESSMENT Originator: Safety Advisor s Signature: Type Name Approval: HSE Manager s Signature: Type Name Approval: Operations Manager
Formwork Labourer Initial work capacity form
Purpose of this form Formwork Labourer This form is designed to be completed by injured workers and their supervisors and/or the return to work coordinator, if applicable; to determine the tasks the worker
Unit Title: Health and Safety in a Construction Environment
Unit Credit Value: 4 Unit Level: One Unit Guided Learning Hours: 40 Ofqual Unit Reference Number: K/505/1933 Unit Review Date: 30/04/2018 Unit Sector: 5.2 Building and Construction Unit Summary This unit
SOUTH AFRICAN QUALIFICATIONS AUTHORITY REGISTERED UNIT STANDARD: Conduct coaching for beginners in wrestling PRE-2009 NQF LEVEL
SOUTH AFRICAN QUALIFICATIONS AUTHORITY REGISTERED UNIT STANDARD: Conduct coaching for beginners in wrestling SAQA US ID UNIT STANDARD TITLE 264734 Conduct coaching for beginners in wrestling ORIGINATOR
Control of Hazardous Energy Lockout / Tagout Program
Control of Hazardous Energy Lockout / Tagout Program August 2016 Table of Contents Purpose... 1 Scope and Application... 1 Responsibilities... 1 Environmental Health and Safety Personnel (EH&S)... 1 Directors
A MESSAGE FROM THE MD
A MESSAGE FROM THE MD The Life Saving Rules set out clear and simple dos and don ts covering activities with the highest potential safety risk and apply to all employees and contractors. The best-performing
Safe Work Method Statement
TE CONTROLLED COPY OF TIS DOCUMENT IS ON TE COMPUTER NETWORK PRINTED COPIES ARE ONLY CURRENT FOR TE DATE AT TE BOTTOM OF TE PAGE. Title Working at eight SWMS No. 16 Authorized and email Signed by the (Managing
Lifting Operation & Lifting Equipment Procedure
SRSS Lifting Equipment Procedure 1. DOCUMENT CONTROL Management System Element Title SRSS SMS PROCEDURE Lifting Operation & Lifting Equipment Procedure SMS_HS_PR_033_ Version # & V1 10/08/2016 Lifting
C l o t h i n g a n d T e x t i l e s ( 8 ) A Middle Years Human Ecology Course
0 4 8 6 C l o t h i n g a n d T e x t i l e s ( 8 ) A Middle Years Human Ecology Course Human Ecology Clothing & Clothing & Textiles Family Family Studies Studies the progression of Home Economics & Food
Effective Workplace Inspections
Effective Workplace Inspections Why are workplace inspections important? 3600-Safety Inspections-General Information Workplace inspections help prevent injuries and illnesses. Through critical examination
Preventive Maintenance
A Health and Safety Guideline for Your Workplace Why? Preventive maintenance is predetermined work performed to a schedule with the aim of preventing the wear and tear or sudden failure of equipment components.
Section J. How to develop safety elements for project safety management system. How to develop safety elements for project SMS
Section J How to develop safety elements for project safety management system 1. Once the project management has developed or adopted a safety policy, it needs to develop safety elements to meet the objectives
??????? is committed to providing a safe work environment for its employees and preventing occupational injuries due to falls.
Intent??????? is committed to providing a safe work environment for its employees and preventing occupational injuries due to falls. Fall Protection is an integral part of our commitment to a safe work
P h o t o g r a p h i c L i g h t i n g ( 1 1 B )
9 1 5 9 P h o t o g r a p h i c L i g h t i g ( 1 1 B ) 30S/30E/30M A Photography Course 9 1 5 9 : P h o t o g r a p h i c L i g h t i g ( 1 1 B ) 3 0 S / 3 0 E / 3 0 M Course Descriptio This course focuses
ARKANSAS TECH UNIVERSITY FACILITIES MANAGMENT HEALTH AND SAFETY MANUAL
FALL PROTECTION (PERSONAL FALL ARREST SYSTEMS) 15.0 The purpose of this policy is to specify procedures and training for the safety of the employees in the Facilities Management Group while working on
We live by the Life Saving Rules so that everyone goes home safe, every day.
We live by the Life Saving Rules so that everyone goes home safe, every day. OUR COMMITMENT STATEMENT: As a TransCanada employee or contractor performing work on behalf of TransCanada, I will adhere to
There is one Fact Sheet for each module presented in the course. They are easily printed either singly or collectively.
OSHA 10 GENERAL INDUSTRY FACT SHEETS The following Fact Sheets are provided to assist the student in identifying content and learning objectives for each module presented in the training course. There
S31 Opening Statement Working at Height
S31 Opening Statement Working at Height Falls from height are by far the most common cause of workplace deaths and one of the main causes of major injury in the workplace. Latest figures reveal that 46
Manual Handling Procedure
Manual Handling Procedure Table of Contents 1 Purpose... 3 2 Scope... 3 3 Definitions... 3 4 Responsibilities... 3 4.1 Managers And Supervisors... 3 4.2 Workers (Employees, Contractors And Visitors)...
PLANT AND EQUIPMENT SAFETY
PLANT AND EQUIPMENT SAFETY RCG013 (E) -v1-01/2017 Page 1 2017 Royal & Sun Alliance Insurance plc Contents Introduction... 3 Abrasive Wheels... 3 Fork Lift Trucks & Transport... 4 Fitness Equipment Safety...
EHS Workplace Inspection Checklist (Ref. SOP QMS-080; EHS-010)
(Ref. SOP QMS-080; EHS-010) Form-445 Inspected by: Date of inspection Date of Report Report # Pages Area Manager: Area Inspected: General This EHS Workplace Inspection was conducted by: Scope of the Inspection:
Hazard Recognition. Leader s Guide and Quiz
Hazard Recognition Leader s Guide and Quiz 4831 INTRODUCTION TO THE PROGRAM Structure and Organization Information in this program is presented in a definite order so that employees will see the relationships
Chief Operating Officer Approved by. Responsible Officer. Vice-Chancellor Approved and commenced 25 September, 2017 Review by September, 2020
Work Health and Safety Policy Responsible Officer Chief Operating Officer Approved by Vice-Chancellor Approved and commenced 25 September, 2017 Review by September, 2020 Relevant Legislation, University
LO/TO LOCKOUT/TAGOUT PROGRAM
LO/TO LOCKOUT/TAGOUT PROGRAM April 2017 CONTENTS Section 1: Introduction...1 Section 2: Purpose... 1 Section 3: Application... 1 Section 4: Definitions... 2 Section 5: Roles and Responsibilities... 4 Section
Hazardous Energy Control
Lockout Tagout This program has been prepared to provide assistance in compliance with USA OSHA standards and/or Best Management Practices. It should not be used without consideration of the unique conditions
Safe Work Method Statement (SWMS)
Safe Work Method Statement (SWMS) Organisation Details : Organisation Name Northern Plumbing Contact ABN 17 15 41 4 Position Director Address 47 Thomas Street Edgeworth 85 Phone Number 0411 10 4 Project
Z5160 Load adapter Mounting instructions (1.2 EN)
Z560 Load adapter Mounting instructions (. EN) WARNING! CAUTION! IMPORTANT! Note: References in the manual This refers to a potentially dangerous situation which may lead to personal injury. This refers
WORKING ALONE PROGRAM
WORKING ALONE PROGRAM PURPOSE The purpose of UFV s Working Alone Program is to provide for measures to protect the health and safety of, and minimize risk to, any employees and students who work alone
New Employee Safety Orientation. Session Objectives. Session Objectives (cont.)
New Employee Safety Orientation Session Objectives Understand your role in safety and security Get safety information Identify and report safety hazards Prevent and respond to fires Respond to accidents
List 4 Example Of How Manual Handling Risks Can Be Reduced
List 4 Example Of How Manual Handling Risks Can Be Reduced Risk assessment for reduced handling capacity (staff) So for example a possible risk (2) of a medium severity injury requiring 3 days away from
Carpenter Initial work capacity form
Purpose of this form Carpenter This form is designed to be completed by injured workers and their supervisors and/or the return to work coordinator, if applicable; to determine the tasks the worker may
Recognition, Evaluation, and Control of Hazards
Recognition, Evaluation, and Control of Hazards Latest revised date: October 26, 2011 Page 1 of 8 1.0 Introduction Memorial University has established a system for the recognition, evaluation, and control
National Wireless Training Standard
Skills Based Training Subcommittee In Collaboration with Wireless Industry Safety Task Force and National Association of Tower Erectors (NATE) 2014 Contents Contents Definition of Job Classifications...1
Accident/Incident Reporting and Investigation Procedures
Accident/Incident Reporting and Investigation Procedures Policy reference Workplace Health and Safety Policy Procedure reference Workplace Health and Safety Risk Assessment Procedures Procedure It is imperative
Safe Work Practices (SWP) SWP (6) FALL PROTECTION PROGRAM
SWP (6) FALL PROTECTION PROGRAM The following information on Fall Protection has been based around the BC OHS Regulations, standards, policies and guidelines. Prior to starting work outside of BC, the
Principles of health and safety [SAMPLE] Test duration: 45 minutes
![Principles of health and safety [SAMPLE] Test duration: 45 minutes](/thumbs/78/77689686.jpg "Principles of health and safety [SAMPLE] Test duration: 45 minutes")
Unit 301 [SAMPLE] Principles of health and safety Test duration: 45 minutes Read the following notes before you answer any questions: Attempt all questions If you find a question difficult, leave it and
Staffing Services Client Evaluation Form
Staffing Services Client Evaluation Form Client Name: Location: Contact(s): Completed By: A Safety Performance Experience Modification Factor? OSHA 300 Logs Available? # Of Injuries/Illnesses? Types of
HAZARD RECOGNITION EVALUATION and CONTROL
What is a hazard? HAZARD RECOGNITION EVALUATION and CONTROL Hazard - a dangerous object, event, behaviour or condition (in the workplace) which has the potential to cause injury, illness or property damage.
Industrial Rope Access
Industrial Rope Access About Tai Poutini Polytechnic 1 Pathways 2 Programmes Certificate in Industrial Rope Access (Elementary) Level 3 2 Certificate in Industrial Rope Access (Working on Ropes) Level
Ticketing and Administrative Penalties
OHS Ticketing and Administrative Penalties Page 1 Ticketing and Administrative Penalties Administrative Penalties Occupational Health and Safety (OHS) administrative penalties can be imposed against any
FEDERATION OF PILING SPECIALISTS CODE OF INDUSTRY BEST PRACTICE LIFTING OPERATIONS AND LIFTING EQUIPMENT REGULATIONS 1998
FEDERATION OF PILING SPECIALISTS CODE OF INDUSTRY BEST PRACTICE LIFTING OPERATIONS AND LIFTING EQUIPMENT REGULATIONS 1998 CONTENTS 1. Introduction 2. Definitions and Statements 3. LOLER Considerations
Lifesaving Society National Lifeguard Instructor Candidate Self-Assessment
Lifesaving Society National Lifeguard Instructor Candidate Self-Assessment This self-assessment presents the learning outcomes that instructor candidates must achieve in order to pass the Lifesaving Society
Occupational Health & Safety
Personal Development Level 3 Occupational Health & Safety Any injury particularly workplace injury is a major cause of concern for all involved in Occupational Health and Safety (OHS). The factors which
SAFETY MANUAL. Ensuring we ALL get home safely. Printed Manual # Prepared by:
SAFETY MANUAL Ensuring we ALL get home safely Printed Manual # Prepared by: Document Control Document Control Acknowledgement This Manual has been issued to: I acknowledge receipt of Printed Manual #:
QUALIFICATION DETAILS
Outcome Statement QUALIFICATION DETAILS Qualification Title New Zealand Certificate in Industrial Rope Access (Level 3) Version 1 Qualification type Certificate Level 3 Credits 59 NZSCED DAS Classification
RESCUE TRAINING and SERVICES CONFINED SPACE HIGH ANGLE SURFACE MINES EXCAVATION/TRENCH ADVANCED RIGGING. Winter, D2000 Safety: Key Facts
TM RESCUE TRAINING and SERVICES CONFINED SPACE HIGH ANGLE D2000 Safety: Key Facts SURFACE MINES EXCAVATION/TRENCH Safety Confined Space Fall Protection Excavation Forklift Scaffolds See Back Cover Winter,