Extension Platform. Base Platform. Crossover. Exit railing. Exit Railing

Size: px

Start display at page:

Download "Extension Platform. Base Platform. Crossover. Exit railing. Exit Railing"

Walter Tucker
5 years ago
Views:

Base Platform Galvanized With metal grate and two brackets Railing on the long side and a face side Extension

extension platforms can be screwed together Normally the base platform should be the finishing element by assembly

800 1000 x 1000 Ca. weight in kg 40,0 46,0 814050 814067 Height mm 400 x 800 800 x 800 500 x 1000 1000 x 1000 Ca.

grating 800 mm deep Descending ladder 980 mm Cutting of to length Recommendation: Use wall anchors or foot plates at

1 Base Platform Galvanized With metal grate and two brackets Railing on the long side and a face side Extension Platform Galvanized With metal grate and one bracket Railing on the long side with rail connection Any number of extension platforms can be screwed together Normally the base platform should be the finishing element by assembly Base Platform Extension Platform Base Platform Extension Platform Height mm 800 x x 1000 Ca. weight in kg 40,0 46, Height mm 400 x x x x 1000 Ca. weight in kg 16,0 34,5 21,0 47, Crossover Exit railing Exit Railing Steel-galvanized grating 800 mm deep Descending ladder 980 mm Cutting of to length Recommendation: Use wall anchors or foot plates at the end of the descend Length 500 mm With base angles Single stile extension Angled Ladder with exit rails and two pcs Abb. Two pcs. Art.- No with ladder Aluminum, anodized Aluminum, natural Aluminum, anodized Aluminum, natural Aluminum, anodized Aluminum, natural

Accessories Exit Step Made of perforated plate The top

fall protection and rest platform 150 520 814234 814289

to the floor 120 x 120 mm Bore hole diameter: Ø 14 mm

access barrier on upper end Can be locked with padlock

2 Accessories Exit Step Made of perforated plate The top rung may be enlarged to a convenient standing area measuring ca. 150 x 520 mm Platform, foldable Suitable for use as fall protection and rest platform Foot Plate Access Ladder For mounting the ladder to the floor 120 x 120 mm Bore hole diameter: Ø 14 mm 150 Rung ladder Can be hooked Can be locked Ladder length 2.50 m Security Door With access barrier on upper end Can be locked with padlock (not supplied, must be provided by customer) Emergency Exit Ladder Rung ladder Automatical ladder release from the top Length to floor 2.50 m

Accessories Wall Anchor, rigid Other sizes available on request 230 150 200 mm

100 16 420 200 275 mm 814333 814340 200-275 0 Hand Rail With screwing plates Wall

400 600 814401 814418 Safety Barrier Self-locking With red shrinking tube Can be

mounted between the railing of the base or the extension platform and the climbing

Connecting Brace To strengthen the ladder parts if the distance of the wall anchors

3 Accessories Wall Anchor, rigid Other sizes available on request mm mm x mm Hand Rail With screwing plates Wall Anchor, Rigid Wall clearance 500 mm Length in mm Length in mm Safety Barrier Self-locking With red shrinking tube Can be screwed to ladder rails or to exit side rail Length Connecting Brace To be mounted between the railing of the base or the extension platform and the climbing ladder in order to close the gap Length 600 mm, brace must be cut on site Connecting Brace To strengthen the ladder parts if the distance of the wall anchors on site is less than the prescribed 2 meters 1000 mm length, two pieces per ladder are required

Access aids In accordance with DIN 19 572 (holding devices for shafts) and BGV C5 (waste water systems), step iron ladders must have a holding device at their exit point in order to ensure safe entry

4 Access aids In accordance with DIN (holding devices for shafts) and BGV C5 (waste water systems), step iron ladders must have a holding device at their exit point in order to ensure safe entry and exit, e.g. hand bars or hand rails. The products listed below are in compliance with the specifications of DIN Holding Bar with two handles Made of stainless V4A (1.4571), pickled and passivated Highly economical due to mobile use: Only the sleeve remains fixed in the shaft. Insert Sleeve Made of stainless V4A (1.4571), pickled and passivated (round model) or galvanized (square model). Suitable for access aid, Art. No Length in m 1,60 Weight kg 3, Weight kg 1,1 1, , Holding Bar with one handle Made of stainless V4A (1.4571), pickled and passivated or galvanized Can be lowered for wall attachment Complete with insert sleeve Holding Bar with one handle Made of stainless V4A (1.4571), pickled and passivated or galvanized Can be lowered for attachment to the ladder rails, sizes 50x20 to 60x25 mm (not suitable for glassfibre reinforced shaft ladders) Complete with insert sleeve Length in m 1,50 1,50 Weight kg 4,5 4, Length in m 1,50 1,50 Weight kg 5,0 5, Holding Frame Made of stainless V4A (1.4571), pickled and passivated or galvanized Can be lowered, complete with fittings for ladder rail 50x20 mm, for ladder outer width of 340 mm and 440 mm Ladder width mm Length m 1,10 1, Ladder width mm Length m 1,10 1, Accessories Express Anchor To attach the sleeves to the shaft wall, we recommend express anchors (approved by building authorities); minimum concrete thickness is 220 mm 8111 For current product information, please refer to the various country-specific websites under

Fall Protection Systems Fall Protection Rail with connecting

8166 8173 Länge m 1,40 1,96 2,80 Aluminium 8180 8197 816603 or

to the top rail 816719 Rail Lock Execution Rigid Detachable

horizontal to vertical position For lateral attachment Rail size

without any sharp corners and edges Stainless- tongue Material

5 Fall Protection Systems Fall Protection Rail with connecting link Plug-In Rail Device 1,96 2, ,96 2, Länge m 1,40 1,96 2,80 Aluminium or ladder rungs For the attachment of fall protection rails to ladders Attachment distance 1.68 m; for shorter ladders, at least 4 attachment points are required Material Steel, galv. Stainl. V4A for ladder rail For access aids, to be screwed to the top rail Rail Lock Execution Rigid Detachable Rail Shunt For lateral exit and changing from horizontal to vertical position For lateral attachment Rail size mm 50 x x Rail size mm 50 x x 25 Stainl. V4A for stirrup For rung distances of more or less than 280 mm Material Steel, galv. Stainl. V4A Safety Runner With snap hook Smooth operation without any sharp corners and edges Stainless- tongue Material Steel, galv. Stainl. V4A Access Aid Plug-in, can be rotated with handles and equipped with rotation lock Safety Belt In accordance with EN 361 Made of tear-resistant nylon straps Stainl. V4A

Security and confidence at height.

A Security and confidence at height. Vertical Systems DISTRIBUTED BY M DBI-SALA Vertical Systems are designed to complement your ability to work while meeting all applicable OSHA and ANSI standards. Vertical