TECHNICAL DATA OBSOLETE

Size: px
Start display at page:

Download "TECHNICAL DATA OBSOLETE"

Transcription

1 June 1, 2008 Foam 240a 1. DESCRIPTION The Chemguard Bladder Tank is one component in a balanced pressure foam proportioning system. It requires no external power, other than the water pressure to ensure correct operation. The vertical and horizontal bladder tanks are designed and constructed in accordance with the latest revisions to ASME code, Section VIII for unfi red pressure vessels with a working pressure of 175 psi and tested to 1.3 times this pressure. The tank shell is constructed of steel, complying with ASME specifi cations, possessing a tensile strength of not less than 70,000 psi. The circumferential, as well as the longitudinal body seam, are machine welded. The tank interior welds and edges are ground smooth. The tank shell connections are screened to prevent bladder blow out or the entrapment of debris between the tank shell and the bladder. The vertical tank assembly is supported by four legs with access to the bladder drain/fi ll valve and the tank shell drain/fi ll valve. Four feet are provided for anchoring the tank. The 50 to 100 gallon horizontal assemblies are supported by four legs. The gallon horizontal assemblies are supported on two saddles welded to the tank and fi tted with anchoring holes. Features Bladder is manufactured of a vinyl based polymer, or a polyester reinforced copolymer. The bladder material shall have an ASTM D-412 Tensile Strength of at least 3000 psi and an ASTM D-624 Graves Tear Strength of at least 420 lbs./in. Tanks are supplied with permanently mounted bronze trim valves with Teflon seats and stainless steel trim piping. All valves are labeled showing normal working position and function. Lifting lugs are permanently welded to the tank with eyes of approximately 2 diameter. Both the vertical and horizontal tanks contain a perforated PVC center tube that assures maximum agent discharge. All tanks are approximately 10% oversized to allow for any thermal expansion of the foam concentrate. All tanks are supplied with a label, which identifies the type of foam concentrate the system is designed for, the percentage ratio and the tank size. Tanks are painted red enamel on the exterior 2. LISTINGS AND APPROVALS UL Listed FM Approved 3. Specifications: See Table 1 Flange Connections: ANSI Class 150 Flanges come standard. Material Standards: Tank: SA Carbon Steel Flanges & Couplings: SA105 Carbon Steel Trim and Fill Piping: 304 Stainless Steel & SA53B Schedule 40 Trim Valves: Bronze with TFE seals Sight Tube: Clear PVC Exterior Coating: Red Enamel Finish Interior: Unfi nished, Ground Smooth Bladder: Vinyl Base Polymer or Polyester Reinforced Copolymer Ordering Information: Part Numbers: Horizontal Tank - CHBT2-xxxx Vertical Tank - CVBT2-xxxx, where xxxx is Tank Capacity Viking Technical Data may be found on The Viking Corporation s Web site at The Web site may include a more recent edition of this Technical Data Page. Form No. F_ Revised page replaces page 180a-j dated March 21, 2008 (Revised to reflect Chemguard tanks)

2 Foam 240b June 1, INSPECTIONS, TESTS AND MAINTENANCE NOTICE: The owner is responsible for maintaining the fi re protection system and devices in proper operating condition. For minimum maintenance and inspection requirements, refer to recognized standards such as those produced by NFPA, LPC, and VdS which describe care and maintenance of sprinkler systems. In addition, the Authority Having Jurisdiction may have additional maintenance, testing and inspection requirements which must be followed. WARNING: Any system maintenance or testing which involves placing a control valve or detection system out of service may eliminate the Fire Protection of that system. Prior to proceeding, notify all Authorities Having Jurisdiction. Consideration should be given to employment of a Fire Patrol in the affected area. 5. AVAILABILITY Viking Foam Products are available through a network of domestic and international distributors. See the Viking web site for closest distributor or contact The Viking Corporation. 6. GUARANTEE For details of warranty, refer to Viking s current list price schedule or contact Viking directly.

3 June 1, 2008 Foam 240c Figure 1: Horizontal Bladder Tank

4 Foam 240d June 1, 2008 Capacity A B C D G H J K M N Weight 50 Gal. (189) 24" (601) 42" (1067) 13.5" (343) 52.4 (1331) 19 (483) 23 (584) 4.5 (114) 3 (76) 1 (25) 9/ (213) 75 Gal. (284) 24" (601) 57" (1448) 13.5" (343) 52.4 (1331) 27 (686) 23 (584) 4.5 (114) 3 (76) 1 (25) 9/ (272) 100 Gal. (379) 24" (601) 72" (1829) 16" (406) 52.4 (1331) 27 (686) 23 (584) 4.5 (114) 3 (76) 1 (25) 9/ (327) 150 Gal. (568) 36" (914) 55" (1397) 18 (457) 64.4 (1636) 30 (762) 34 (864) 5 (127) 28 (711) 3 (76) 9/ (476) 200 Gal. (757) 36" (914) 69" (1753) 18 (457) 64.4 (1636) 22 (559) 34 (864) 5 (127) 28 (711) 3 (76) 9/ (599) 250 Gal. (946) 36" (914) 82" (2083) 18 (457) 64.4 (1636) 35 (889) 34 (864) 5 (127) 28 (711) 3 (76) 9/ (671) 300 Gal. (1136) 36" (914) 96" (2438) 18 (457) 64.4 (1636) 48 (1219) 34 (864) 5 (127) 28 (711) 3 (76) 9/ (726) 350 Gal. (1325) 36" (914) 109" (2769) 18 (457) 64.4 (1636) 61 (1549) 34 (864) 5 (127) 28 (711) 3 (76) 9/ (816) 400 Gal. (1514) 36" (914) 123" (3124) 18 (457) 64.4 (1636) 74 (1880) 34 (864) 5 (127) 28 (711) 3 (76) 9/ (907) 450 Gal. (1703) 36" (914) 136" (3454) 18 (457) 64.4 (1636) 87 (2210) 34 (864) 5 (127) 28 (711) 3 (76) 9/ (987) 500 Gal. (1893) 48" (1219) 92" (2337) 22 (559) 81.1 (2060) 32 (813) 44 (1118) 6 (152) 38 (965) 3 (76) 11/ (1066) 600 Gal. (2271) 48" (1219) 108" (2743) 22 (559) 81.1 (2060) 40 (1016) 44 (1118) 6 (152) 38 (965) 3 (76) 11/ (1270) 700 Gal. (2650) 48" (1219) 123" (3124) 22 (559) 81.1 (2060) 54 (1372) 44 (1118) 6 (152) 38 (965) 3 (76) 11/ (1383) 800 Gal. (3028) 48" (1219) 138" (3505) 22 (559) 81.1 (2060) 68 (1727) 44 (1118) 6 (152) 38 (965) 3 (76) 11/ (1542) 900 Gal. (3407) 48" (1219) 153" (3886) 22 (559) 81.1 (2060) 82 (2083) 44 (1118) 6 (152) 38 (965) 3 (76) 11/ (1687) 1000 Gal. (3785) 48" (1219) 168" (4267) 22 (559) 81.1 (2060) 96 (2438) 44 (1118) 6 (152) 38 (965) 3 (76) 11/ (1769) 1100 Gal. (4164) 60" (1524) 121" (3073) 24 (610) 93.1 (2365) 60 (1524) 54 (1372) 6 (152) 48 (1219) 3 (76) 11/ (1882) 1200 Gal. (4542) 60" (1524) 130" (3302) 24 (610) 93.1 (2365) 69 (1753) 54 (1372) 6 (152) 48 (1219) 3 (76) 11/ (1982) 1300 Gal. (4921) 60" (1524) 139" (3531) 24 (610) 93.1 (2365) 78 (1981) 54 (1372) 6 (152) 48 (1219) 3 (76) 11/ (2064) 1400 Gal. (5300) 60" (1524) 148" (3759) 24 (610) 93.1 (2365) 87 (2210) 54 (1372) 6 (152) 48 (1219) 3 (76) 11/ (2159) 1500 Gal. (5678) 60" (1524) 158" (4013) 24 (610) 93.1 (2365) 96 (2438) 54 (1372) 6 (152) 48 (1219) 3 (76) 11/ (2241) 1600 Gal. (6057) 72" (1829) 125" (3175) 27 (686) (2670) 51 (1295) 65 (1651) 8 (203) 59 (1499) 3 (76) 13/ (2327) 1700 Gal. (6435) 72" (1829) 131" (3327) 27 (686) (2670) 57 (1448) 65 (1651) 8 (203) 59 (1499) 3 (76) 13/ (2418) 1800 Gal. (6814) 72" (1829) 137" (3480) 27 (686) (2670) 63 (1600) 65 (1651) 8 (203) 59 (1499) 3 (76) 13/ (2499) 1900 Gal. (7192) 72" (1829) 144" (3658) 27 (686) (2670) 69 (1753) 65 (1651) 8 (203) 59 (1499) 3 (76) 13/ (2581) 2000 Gal. (7571) 72" (1829) 150" (3810) 27 (686) (2670) 75 (1905) 65 (1651) 8 (203) 59 (1499) 3 (76) 13/ (2735) 2100 Gal. (7949) 84" (2134) 120" (3048) 30 (762) (2974) 39 (991) 75 (1905) 8 (203) 69 (1753) 3 (76) 13/ (2812) 2200 Gal. (8328) 84" (2134) 124" (3150) 30 (762) (2974) 44 (1118) 75 (1905) 8 (203) 69 (1753) 3 (76) 13/ (2903) 2300 Gal. (8706) 84" (2134) 129" (3277) 30 (762) (2974) 48 (1219) 75 (1905) 8 (203) 69 (1753) 3 (76) 13/ (2998) 2400 Gal. (9085) 84" (2134) 133" (3378) 30 (762) (2974) 54 (1372) 75 (1905) 8 (203) 69 (1753) 3 (76) 13/ (3075) 2500 Gal. (9464) 84" (2134) 138" (3505) 30 (762) (2974) 59 (1499) 75 (1905) 8 (203) 69 (1753) 3 (76) 13/ (3107) 2600 Gal. (9842) 84" (2134) 143" (3632) 30 (762) (2974) 65 (1651) 75 (1905) 10 (254) 67 (1702) 4 (102) 1-1/ (3266) 2700 Gal. (10221) 84" (2134) 147" (3734) 30 (762) (2974) 69 (1753) 75 (1905) 10 (254) 67 (1702) 4 (102) 1-1/ (3334) 2800 Gal. (10599) 84" (2134) 152" (3861) 30 (762) (2974) 74 (1880) 75 (1905) 10 (254) 67 (1702) 4 (102) 1-1/ (3402) 2900 Gal. (10978) 84" (2134) 157" (3988) 30 (762) (2974) 78 (1981) 75 (1905) 10 (254) 67 (1702) 4 (102) 1-1/ (3493) 3000 Gal. (11356) 84" (2134) 161" (4089) 30 (762) (2974) 81 (2057) 75 (1905) 10 (254) 67 (1702) 4 (102) 1-1/ (3583) 3100 Gal. (11735) 84" (2134) 166" (4216) 30 (762) (2974) 87 (2210) 75 (1905) 10 (254) 67 (1702) 4 (102) 1-1/ (3685) 3200 Gal. (12113) 84" (2134) 170" (4318) 30 (762) (2974) 92 (2337) 75 (1905) 10 (254) 67 (1702) 4 (102) 1-1/ (3787) 3300 Gal. (12492) 84" (2134) 175" (4445) 30 (762) (2974) 96 (2438) 75 (1905) 10 (254) 67 (1702) 4 (102) 1-1/ (3890) 3400 Gal. (12870) 84" (2134) 179" (4547) 30 (762) (2974) 101 (2565) 75 (1905) 10 (254) 67 (1702) 4 (102) 1-1/ (3992) 3500 Gal. (13249) 84" (2134) 184" (4674) 30 (762) (2974) 105 (2667) 75 (1905) 10 (254) 67 (1702) 4 (102) 1-1/ (4094) 3600 Gal. (13627) 84" (2134) 189" (4801) 30 (762) (2974) 111 (2819) 75 (1905) 12 (305) 67 (1702) 4 (102) 1-1/ (4196) 3700 Gal. (14006) 84" (2134) 193" (4902) 30 (762) (2974) 115 (2921) 75 (1905) 12 (305) 67 (1702) 4 (102) 1-1/ (4298) 3800 Gal. (14385) 84" (2134) 198" (5029) 30 (762) (2974) 120 (3048) 75 (1905) 12 (305) 67 (1702) 4 (102) 1-1/ (4400) 3900 Gal. (14763) 84" (2134) 202" (5131) 30 (762) (2974) 124 (3150) 75 (1905) 12 (305) 67 (1702) 4 (102) 1-1/ (4502) 4000 Gal. (15142) 84" (2134) 207" (5258) 30 (762) (2974) 129 (3277) 75 (1905) 12 (305) 67 (1702) 4 (102) 1-1/ (4604) 4100 Gal. (15520) 84" (2134) 212" (5385) 30 (762) (2974) 133 (3378) 75 (1905) 12 (305) 67 (1702) 4 (102) 1-1/ (4706) 4200 Gal. (15899) 84" (2134) 217" (5512) 30 (762) (2974) 138 (3505) 75 (1905) 12 (305) 67 (1702) 4 (102) 1-1/ (4763) 4300 Gal. (16277) 84" (2134) 221" (5613) 30 (762) (2974) 142 (3607) 75 (1905) 12 (305) 67 (1702) 4 (102) 1-1/ (4865) 4400 Gal. (16656) 84" (2134) 225" (5715) 30 (762) (2974) 147 (3734) 75 (1905) 12 (305) 67 (1702) 4 (102) 1-1/ (4955) 4500 Gal. (17034) 84" (2134) 230" (5842) 30 (762) (2974) 151 (3835) 75 (1905) 12 (305) 67 (1702) 4 (102) 1-1/ (5080) Table 1: Horizontal Bladder Tank Dimensions

5 June 1, 2008 Foam 240e Figure 2: Vertical Bladder Tank

6 Foam 240f June 1, 2008 Capacity A B C D E G J L N Weight 25 Gal. (95 ) 24" (610) 36.5 (927) 4 (DN100) 53.4 (1356) 26 (660) 23 (584) 3 (76) 1.16 (29) 9/ lbs. (136) 36 Gal. (136 ) 24" (610) 36.5 (927) 4 (DN100) 59.4 (1509) 30 (762) 23 (584) 3 (76) 1.16 (29) 9/ lbs. (177) 50 Gal. (189 ) 24" (610) 36.5 (927) 4 (DN100) 67.4 (1712) 38 (965) 23 (584) 3 (76) 1.16 (29) 9/ lbs. (213) 75 Gal. (284 ) 24" (610) 36.5 (927) 4 (DN100) 82.4 (2093) 53 (1346) 23 (584) 3 (76) 1.16 (29) 9/ lbs. (272) 100 Gal. (379 ) 24" (610) 36.5 (927) 4 (DN100) 98.4 (2499) 76 (1930) 23 (584) 3 (76) 1.16 (29) 9/ lbs. (327) 150 Gal. (568 ) 36" (914) 48.5 (1232) 6" (DN150) 78.4 (1991) 47 (1194) 34 (864) 4 (102) 1.31 (33) 9/ lbs. (476) 200 Gal. (757 ) 36" (914) 48.5 (1232) 6" (DN150) 92.4 (2347) 61 (1549) 34 (864) 4 (102) 1.31 (33) 9/ lbs. (599) 250 Gal. (946 ) 36" (914) 48.5 (1232) 6" (DN150) (2677) 74 (1880) 34 (864) 4 (102) 1.31 (33) 9/ lbs. (671) 300 Gal. (1136 ) 36" (914) 48.5 (1232) 6" (DN150) (3033) 88 (2235) 34 (864) 4 (102) 1.31 (33) 9/ lbs. (726) 350 Gal. (1325 ) 36" (914) 48.5 (1232) 6" (DN150) (3363) 101 (2565) 34 (864) 4 (102) 1.31 (33) 9/ lbs. (816) 400 Gal. (1514 ) 36" (914) 48.5 (1232) 6" (DN150) (3719) 115 (2921) 34 (864) 4 (102) 1.31 (33) 9/ lbs. (907) 450 Gal. (1703 ) 36" (914) 48.5 (1232) 6" (DN150) (4049) 128 (3251) 34 (864) 4 (102) 1.31 (33) 9/ lbs. (987) 500 Gal. (1893 ) 48" (1219) 60.5 (1537) 6" (DN150) (2931) 80 (2032) 46 (1168) 4.5 (114) 1.5 (38) 9/ lbs. (1066) 600 Gal. (2271 ) 48" (1219) 60.5 (1537) 6" (DN150) (3287) 94 (2388) 46 (1168) 4.5 (114) 1.5 (38) 9/ lbs. (1270) 700 Gal. (2650 ) 48" (1219) 60.5 (1537) 6" (DN150) (3718) 111 (2819) 46 (1168) 4.5 (114) 1.5 (38) 9/ lbs. (1383) 800 Gal. (3028 ) 48" (1219) 60.5 (1537) 6" (DN150) (4100) 126 (3200) 46 (1168) 4.5 (114) 1.5 (38) 9/ lbs. (1542) 900 Gal. (3407 ) 48" (1219) 60.5 (1537) 6" (DN150) (4481) 141 (3581) 46 (1168) 4.5 (114) 1.5 (38) 9/ lbs. (1687) 1000 Gal. (3785 ) 48" (1219) 60.5 (1537) 6" (DN150) (4862) 156 (3962) 46 (1168) 4.5 (114) 1.5 (38) 9/ lbs. (1769) 1100 Gal. (4164 ) 60" (1524) 72.5 (1842) 8 (DN200) (3767) 109 (2769) 56 (1422) 5 (127) 1.16 (29) 9/ lbs. (1882) 1200 Gal. (4542 ) 60" (1524) 72.5 (1842) 8 (DN200) (3995) 118 (2997) 56 (1422) 5 (127) 1.16 (29) 9/ lbs. (1982) 1300 Gal. (4921 ) 60" (1524) 72.5 (1842) 8 (DN200) (4224) 127 (3226) 56 (1422) 5 (127) 1.16 (29) 9/ lbs. (2064) 1400 Gal. (5300 ) 60" (1524) 72.5 (1842) 8 (DN200) (4453) 136 (3454) 56 (1422) 5 (127) 1.16 (29) 9/ lbs. (2159) 1500 Gal. (5678 ) 60" (1524) 72.5 (1842) 8 (DN200) (4707) 146 (3708) 56 (1422) 5 (127) 1.16 (29) 9/ lbs. (2241) 1600 Gal. (6057 ) 72" (1829) 84.5 (2146) 8 (DN200) (3868) 110 (2794) 68 (1727) 5 (127) 1.16 (29) 9/ lbs. (2327) 1700 Gal. (6435 ) 72" (1829) 84.5 (2146) 8 (DN200) (4021) 116 (2946) 68 (1727) 5 (127) 1.16 (29) 9/ lbs. (2418) 1800 Gal. (6814 ) 72" (1829) 84.5 (2146) 8 (DN200) (4173) 122 (3099) 68 (1727) 5 (127) 1.16 (29) 9/ lbs. (2499) 1900 Gal. (7192 ) 72" (1829) 84.5 (2146) 8 (DN200) (4351) 129 (3277) 68 (1727) 5 (127) 1.16 (29) 9/ lbs. (2581) 2000 Gal. (7571 ) 72" (1829) 84.5 (2146) 8 (DN200) (4503) 135 (3429) 68 (1727) 5 (127) 1.16 (29) 9/ lbs. (2735) 2100 Gal. (7949 ) 84" (2134) 96.5 (2451) 10 (DN250) (3741) 102 (2591) 78 (1981) 7 (179) 1.41 (36) 9/ lbs. (2812) 2200 Gal. (8328 ) 84" (2134) 96.5 (2451) 10 (DN250) (3843) 106 (2692) 78 (1981) 7 (179) 1.41 (36) 9/ lbs. (2903) 2300 Gal. (8706 ) 84" (2134) 96.5 (2451) 10 (DN250) (3970) 111 (2819) 78 (1981) 7 (179) 1.41 (36) 9/ lbs. (2998) 2400 Gal. (9085 ) 84" (2134) 96.5 (2451) 10 (DN250) (4072) 115 (2921) 78 (1981) 7 (179) 1.41 (36) 9/ lbs. (3075) 2500 Gal. (9464 ) 84" (2134) 96.5 (2451) 10 (DN250) (4199) 120 (3048) 78 (1981) 7 (179) 1.41 (36) 9/ lbs. (3107) 2600 Gal. (9842 ) 84" (2134) 96.5 (2451) 10 (DN250) (4326) 125 (3175) 78 (1981) 7 (179) 1.41 (36) 9/ lbs. (3266) 2700 Gal. (10221 ) 84" (2134) 96.5 (2451) 10 (DN250) (4427) 129 (3175) 78 (1981) 7 (179) 1.41 (36) 9/ lbs. (3334) 2800 Gal. (10599 ) 84" (2134) 96.5 (2451) 10 (DN250) (4554) 134 (3404) 78 (1981) 7 (179) 1.41 (36) 9/ lbs. (3402) 2900 Gal. (10978 ) 84" (2134) 96.5 (2451) 10 (DN250) (4681) 139 (3531) 78 (1981) 7 (179) 1.41 (36) 9/ lbs. (3493) 3000 Gal. (11356 ) 84" (2134) 96.5 (2451) 10 (DN250) (4783) 143 (3632) 78 (1981) 7 (179) 1.41 (36) 9/ lbs. (3583) 3100 Gal. (11735 ) 84" (2134) 96.5 (2451) 10 (DN250) (4910) 148 (3759) 78 (1981) 7 (179) 1.41 (36) 9/ lbs. (3685) 3200 Gal. (12113 ) 84" (2134) 96.5 (2451) 10 (DN250) (5011) 152 (3861) 78 (1981) 7 (179) 1.41 (36) 9/ lbs. (3787) 3300 Gal. (12492 ) 84" (2134) 96.5 (2451) 10 (DN250) (5138) 157 (3988) 78 (1981) 7 (179) 1.41 (36) 9/ lbs. (3890) 3400 Gal. (12870 ) 84" (2134) 96.5 (2451) 10 (DN250) (5240) 161 (4089) 78 (1981) 7 (179) 1.41 (36) 9/ lbs. (3992) 3500 Gal. (13249 ) 84" (2134) 96.5 (2451) 10 (DN250) (5367) 166 (4216) 78 (1981) 7 (179) 1.41 (36) 9/ lbs. (4094) 3600 Gal. (13627 ) 84" (2134) 96.5 (2451) 10 (DN250) (5494) 171 (4343) 78 (1981) 7 (179) 1.41 (36) 9/ lbs. (4196) 3700 Gal. (14006 ) 84" (2134) 96.5 (2451) 10 (DN250) (5596) 175 (4445) 78 (1981) 7 (179) 1.41 (36) 9/ lbs. (4298) 3800 Gal. (14385 ) 84" (2134) 96.5 (2451) 10 (DN250) (5723) 180 (4572) 78 (1981) 7 (179) 1.41 (36) 9/ lbs. (4400) 3900 Gal. (14763 ) 84" (2134) 96.5 (2451) 10 (DN250) (5826) 184 (4674) 78 (1981) 8 (203) 1.91 (49) 11/ lbs. (4502) 4000 Gal. (15142 ) 84" (2134) 96.5 (2451) 10 (DN250) (5951) 189 (4801) 78 (1981) 8 (203) 1.91 (49) 11/ lbs. (4604) 4100 Gal. (15520 ) 84" (2134) 96.5 (2451) 10 (DN250) (6078) 194 (4928) 78 (1981) 8 (203) 1.91 (49) 11/ lbs. (4706) 4200 Gal. (15899 ) 84" (2134) 96.5 (2451) 10 (DN250) (6205) 199 (5055) 78 (1981) 8 (203) 1.91 (49) 11/ lbs. (4763) 4300 Gal. (16277 ) 84" (2134) 96.5 (2451) 10 (DN250) (6307) 203 (5156) 78 (1981) 8 (203) 1.91 (49) 11/ lbs. (4865) 4400 Gal. (16656 ) 84" (2134) 96.5 (2451) 10 (DN250) (6408) 207 (5258) 78 (1981) 8 (203) 1.91 (49) 11/ lbs. (4955) 4500 Gal. (17034 ) 84" (2134) 96.5 (2451) 10 (DN250) (6535) 212 (5385) 78 (1981) 8 (203) 1.91 (49) 11/ lbs. (5080) Table 2: Vertical Bladder Tank Dimensions

7 June 1, 2008 Foam 240g Figure 3 - Discharge Detail

8 Foam 240h June 1, 2008 Figure 4 - Bladder Tank Leg Detail Form No. F_ Revised page replaces page 180a-j dated March 21, 2008 (Revised to reflect Chemguard tanks)

SABERINDO PACIF SABERINDO PACIFIC CIFIC SABERINDO PA. A Tyco International Company

SABERINDO PACIF SABERINDO PACIFIC CIFIC SABERINDO PA. A Tyco International Company CIF A Tyco International Company 1 Foam Concentrate CIF 3% AFFF -UL Listed -UL Canada Listed 6% AFFF 6 parts AFFF concentrate to 94 parts water -UL Listed- Foam Liquid -UL Canada Listed 3% FLUOROPROTEIN

More information

Vertical and Horizontal Bladder Tanks

Vertical and Horizontal Bladder Tanks DATA SHEET Vertical and Horizontal Tanks Application The ANSUL bladder tank is one component in a balanced pressure proportioning system. Its operation requires no external power other than a pressurized

More information

OBSOLETE. Wet pipe low flow manifold system

OBSOLETE. Wet pipe low flow manifold system June 1, 2008 Foam 15a 1. Description Multiple risers can be supplied from a single proportioning device. A riser manifold is installed with various riser types and sizes that are to supply foam solution

More information

Horizontal Bladder Tanks

Horizontal Bladder Tanks DATA SHEET Horizontal Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)

More information

Vertical Bladder Tanks

Vertical Bladder Tanks DATA SHEET Vertical Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)

More information

FM Approved - Automatic Water Control Valve as standard deluge valve. No formal approval available for coating. Foam Concentrate

FM Approved - Automatic Water Control Valve as standard deluge valve. No formal approval available for coating. Foam Concentrate December 6, 2010 Foam 21a 1. Description With Multiple Foam/Water Deluge Systems Supplied by a Bladder Tank, multiple deluge foam risers can be supplied from a single foam concentrate source. Where a bladder

More information

Model MTB-ASME Horizontal Bladder Tanks

Model MTB-ASME Horizontal Bladder Tanks DATA SHEET Model MTB-ASME Horizontal Bladder Tanks Features n UL Listed and FM Approved for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure

More information

Model MTB-ASME Vertical Bladder Tanks

Model MTB-ASME Vertical Bladder Tanks DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)

More information

FM Approved - Automatic Water Control Valve as standard deluge valve. No formal approval available for coating. Foam Concentrate

FM Approved - Automatic Water Control Valve as standard deluge valve. No formal approval available for coating. Foam Concentrate December 6, 2010 Foam 31a 1. Description With Multiple Pilot Pressure Regulating Foam/Water Deluge Systems Supplied by a Bladder Tank, multiple pilot pressure regulating foam risers can be supplied from

More information

Model MTB-ASME Vertical Bladder Tanks

Model MTB-ASME Vertical Bladder Tanks DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)

More information

TECHNICAL DATA NOTICE

TECHNICAL DATA NOTICE Page 1 of 5 1. DESCRIPTION FomTec BFZ Inductors are used to mix foam concentrate with water when the foam concentrate is supplied from a tank at atmospheric pressure. The BFZ inductor can be installed

More information

VERTICAL BLADDER TANK

VERTICAL BLADDER TANK Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Tight Spaces UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure

More information

HORIZONTAL BLADDER TANK

HORIZONTAL BLADDER TANK Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Low Ceilings UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure

More information

Wet pipe low flow foam/water system

Wet pipe low flow foam/water system December 6, 2010 Foam 14a 1. The Viking Low Flow Foam/Water proportioning system, is a UL Listed and FM Approved system, for use with Viking supplied foam concentrates. This system consists of a standard

More information

TECHNICAL DATA Q= C. Table 1 - Specifications

TECHNICAL DATA Q= C. Table 1 - Specifications September 25, 2013 Pressure Regulation 537a 1. Description The Model B-3 Pilot Operated Pressure Control Valve is a factory assembled unit. The unit consists of a Model J-2 Halar coated Flow Control Valve,

More information

TECHNICAL DATA OBSOLETE

TECHNICAL DATA OBSOLETE August 2, 2006 Foam 70a 1. DESCRIPTION A Hi-Expansion Foam System is a standard deluge system capable of discharging a foam/water solution automatically through open Hi-Ex Generators. A Hi-Expansion Foam

More information

FOAM TANK (1/2) DATA SHEET

FOAM TANK (1/2) DATA SHEET FIRE FIGHTING EQUIPMENT DATA SHEET FOAM TANK (1/2) DATA SHEET JOB NO. : RFQ. NO. : ISSUE : SHEET OF 01 CUSTOMER : ITEM NO. : 02 PROJECT : QUANTITY : 03 LOCATION : SERVICE : FOAM SYSTEM 04 05 CODE & STANDARDS

More information

TECHNICAL DATA. Q = C v P S

TECHNICAL DATA. Q = C v P S Preaction 346a 1. Description The 6 Model G-6000P Electric Release Preaction System Riser Assembly can be used as a Single Interlock Preaction System with Electric Release, or as a Double Interlock Preaction

More information

TECHNICAL DATA. Q = C v P S

TECHNICAL DATA. Q = C v P S January 6, 2012 Preaction 347a 1. Description Viking supervised Double-Interlocked Electric/Pneumatic Release Preaction Systems utilize the Viking G-6000P Valve. The small profile, lightweight, pilot operated

More information

TECHNICAL DATA. Trimpac 244a. September 16, 2013

TECHNICAL DATA. Trimpac 244a. September 16, 2013 September 16, 2013 Trimpac 244a 1. DEsCrIpTION DESCRIPTION TRIMPAC Model B-1 and B-1B is a factory-assembled trim package with an electric release module in a metal enclosure. The standard trim normally

More information

TECHNICAL DATA. Table 1 - Specifications

TECHNICAL DATA. Table 1 - Specifications Page 1 of 6 1. DESCRIPTION Model A-3 Pilot Operated Pressure Control Valves are factory assembled units. Each unit consists of a Model H-2 Halar coated Flow Control Valve, a Speed Control Valve, a Model

More information

BLADDER TANK PROPORTIONING SYSTEM PRE-PIPED

BLADDER TANK PROPORTIONING SYSTEM PRE-PIPED BLADDER TANK PROPORTIONING SYSTEM PRE-PIPED HD FIRE PROTECT TECHNICAL DATA TANK MOUNTING Vertical or Horizontal TYPE COENTRATE For Vertical Tank 140 liters STORAGE CAPACITY to7500 liters (36 TO 2000 Gallon

More information

TECHNICAL DATA. Q = C v P S

TECHNICAL DATA. Q = C v P S January 6, 2012 Preaction 348a 1. Description Viking supervised Surefire Preaction Systems utilize the Viking G-6000P Valve. The small profile, lightweight, pilot operated Viking G-6000P Valve comes complete

More information

TECHNICAL DATA. Q = C v P S

TECHNICAL DATA. Q = C v P S January 6, 2012 Preaction 333a 1. Description Viking supervised Surefire Preaction Systems Utilize the Viking G-3000P Valve. The small profile, lightweight, pilot-operated Viking G-3000P Valve comes complete

More information

TECHNICAL DATA OBSOLETE

TECHNICAL DATA OBSOLETE April 9, 2009 Preaction 326a 1. DESCRIPTION Viking supervised Double-Interlocked Electric/Pneumatic Release Preaction Systems utilizing the Viking G-4000P Deluge Valve. The small profi le, lightweight,

More information

TECHNICAL DATA. TRIMPAC Model B-5 & B-5B

TECHNICAL DATA. TRIMPAC Model B-5 & B-5B September 16, 2013 Trimpac 250a 1. DESCRIPTION DEsCRIPTIoN is a factory assembled trim package for a ed an electric/pneumatic release module in a metal enclosure. The standard trim normally required on

More information

Pipe Thread Connection 1/2 inch NPT. Friction Loss Refer to Figure 3

Pipe Thread Connection 1/2 inch NPT. Friction Loss Refer to Figure 3 Worldwide Contacts www.tyco-fire.com Model B-1 Pipe Line Strainer General Description The Model B-1 Pipe Line Strainers (Ref. Figures 1 and 2) are designed for installation in the water supply connection

More information

Speed control assembly model A-1

Speed control assembly model A-1 Pressure Regulation 533a 1. DESCRIPTION The Viking Speed Control Assembly provides adjustment of the opening speed of Viking Deluge Valves, and adjustment of both the opening and closing speed of Viking

More information

TECHNICAL DATA. Trimpac 251a. Spetember 16, 2013

TECHNICAL DATA. Trimpac 251a. Spetember 16, 2013 Spetember 16, 2013 Trimpac 251a 1. DEsCrIpTION DESCRIPTION TRIMPAC Model B-6 and B-6B is a factory assembled trim package for a double interlocked preaction system with an electric/pneu-lectric release

More information

Bladder Tank Installation & System Design Information

Bladder Tank Installation & System Design Information Bladder Tank Installation & System Design Information The Chemguard Bladder Tank is one component in a balanced pressure foam proportioning fire protection system. It requires no external power other than

More information

TECHNICAL DATA. Q = C v P S

TECHNICAL DATA. Q = C v P S January 6, 2012 Preaction 331a 1. Description Viking supervised Double-Interlocked Electric/Pneumatic Release Preaction Systems utilize the Viking G-3000P Valve. The small profile, lightweight, pilot-operated

More information

TECHNICAL DATA. Low-Flow Foam Preaction System with Hydraulically Actuated Concentrate Control Valve.

TECHNICAL DATA. Low-Flow Foam Preaction System with Hydraulically Actuated Concentrate Control Valve. Foam 302 a 1. DESCRIPTION (Refer to Figure 1 on page 302 e.) The Viking Low-Flow Foam/Water Proportioning System is a UL Listed and FM Approved system, for use with 3M and Viking brand foam concentrate.

More information

TECHNICAL DATA. than the water inlet pressure to the concentrate

TECHNICAL DATA. than the water inlet pressure to the concentrate Foam102a 1. DESCRIPTION The Viking Low Flow Foam/Water proportioning system, is a UL Listed and FM Approved system, for use with 3M foam concentrates. This system consists of a standard wet pipe sprinkler

More information

FOAM TANK (1/2) DATA SHEET

FOAM TANK (1/2) DATA SHEET FIRE FIGHTING EQUIPMENT DATA SHEET FOAM TANK (1/) DATA SHEET JOB NO. : RFQ. NO. : ISSUE : SHEET OF 01 CUSTOMER : ITEM NO. : 0 PROJECT : QUANTITY : 0 LOCATION : SERVICE : FOAM SYSTEM 0 05 CODE & STANDARDS

More information

TECHNICAL DATA. Dry 132a. October 1, 2008

TECHNICAL DATA. Dry 132a. October 1, 2008 October 1, 2008 Dry 132a 1. Description Viking High Pressure (HP) Dry Systems utilize a Viking Model E or Model F Deluge Valve to control the water supply to system piping equipped with closed sprinklers.

More information

TECHNICAL DATA. Pressure Regulation 531a. April 24, 2009

TECHNICAL DATA. Pressure Regulation 531a. April 24, 2009 April 24, 29 Pressure Regulation 531a 1. DESCRIPTION The Viking Regulating Valve is a direct-acting, single-seated, spring-loaded diaphragm valve. When installed as a pilot regulating valve on a Viking

More information

TECHNICAL DATA. the Viking Pilot Pressure Regulating Valve 1 Model A-1 Speed Control Assembly: OBSOLETE. the Viking Speed Control Assembly 1

TECHNICAL DATA. the Viking Pilot Pressure Regulating Valve 1 Model A-1 Speed Control Assembly: OBSOLETE. the Viking Speed Control Assembly 1 November 30, 1994 534 a 1. PRODUCT NAME VIKING 2" (50mm), 3" (75mm), 4" (100mm), 6" (150mm) 2. MANUFACTURER THE VIKING CORPORATION 210 N. Industrial Park Road Hastings, Michigan 49058 U.S.A. Telephone:

More information

TECHNICAL DATA. Q = C v P S

TECHNICAL DATA. Q = C v P S Page 1 of 13 1. DESCRIPTION The Viking 6 Model G-6000 Dry Valve Riser Assembly consists of a small profile, light weight, pilot operated valve that is used to separate the water supply from the dry sprinkler

More information

TECHNICAL DATA. Trimpac 257a. September 16, 2013

TECHNICAL DATA. Trimpac 257a. September 16, 2013 September 16, 2013 Trimpac 257a 1. DESCrIpTION DESCRIPTION The Viking Double SUREFIRE SIngle Interlock Preaction TRIMPAC Model D-2 and D-2B used with either a Model E or F Deluge Valve (A.1), a Viking

More information

Anti-flood device Model B-1

Anti-flood device Model B-1 December 4, 2009 Dry Systems 123a 1. DESCRIPTION The Anti-flood Device is required when Viking accelerators are installed on dry systems according to Viking Model E-1 Accelerator Trim Charts. In the SET

More information

TECHNICAL DATA. Trimpac 256a. October 31, 2013

TECHNICAL DATA. Trimpac 256a. October 31, 2013 October 31, 2013 Trimpac 256a 1. DESCRIPTION The Viking SUREFIRE SIngle Interlock Preaction TRIMPAC Model D-1 and D- 1B used with either a Model E or F Deluge Valve (A.1), a Viking Easy Riser check valve

More information

TECHNICAL DATA 3 MODEL G-3000 DRY VALVE RISER ASSEMBLY

TECHNICAL DATA 3 MODEL G-3000 DRY VALVE RISER ASSEMBLY Page 1 of 13 1. DESCRIPTION The Viking 3 Model G-3000 Dry Valve Riser Assembly is equipped with a small profile, light weight, pilot operated valve that is used to separate the water supply from the dry

More information

TECHNICAL DATA ANTI-FLOOD DEVICE MODEL B-1 1. DESCRIPTION

TECHNICAL DATA ANTI-FLOOD DEVICE MODEL B-1 1. DESCRIPTION Page 1 of 6 1. DESCRIPTION The Model B-1 Anti-flood Device is required when Viking accelerators are installed on dry systems according to Viking Model E-1 Accelerator Trim Charts. In the SET condition,

More information

TECHNICAL DATA. Page 1 of 12

TECHNICAL DATA. Page 1 of 12 Page 1 of 12 1. DESCRIPTION The Viking Regulating Valve is a direct-acting, single-seated, spring-loaded diaphragm valve. When installed as a pilot regulating valve on a Viking Model H or J Flow Control

More information

TECHNICAL DATA. Q= Cv S

TECHNICAL DATA. Q= Cv S Page 1 of 13 1. DESCRIPTION The Viking 4 inch Model G-4000 Dry Valve Riser Assembly consists of a small profile, light weight, pilot operated valve that is used to separate the water supply from the dry

More information

TECHNICAL DATA Q = C. v P S. 2 Model G-2000 Dry valve. Page 1 of 13

TECHNICAL DATA Q = C. v P S. 2 Model G-2000 Dry valve. Page 1 of 13 Page 1 of 13 1. Description The Viking 2 Model G-2000 Dry Valve Riser Assembly consists of a small profile, light weight, pilot operated valve that is used to separate the water supply from the dry sprinkler

More information

DESIGN DATA A WET PIPE BLADDER TANK FOAM/WATER SYSTEM WITH HYDRAULICALLY ACTUATED DELUGE CONCENTRATE CONTROL VALVE

DESIGN DATA A WET PIPE BLADDER TANK FOAM/WATER SYSTEM WITH HYDRAULICALLY ACTUATED DELUGE CONCENTRATE CONTROL VALVE February 9, 1998 Foam 101a A BLADDER TANK WITH 1. DESCRIPTION A Wet Pipe Bladder Tank Foam/Water System is a standard wet pipe automatic sprinkler system capable of discharging a foam/water solution automatically

More information

DESIGN DATA OBSOLETE. C. Inspections - It is imperative that the system be inspected and tested on a regular basis. See Inspection

DESIGN DATA OBSOLETE. C. Inspections - It is imperative that the system be inspected and tested on a regular basis. See Inspection February 9, 1998 Foam 201a 1. DESCRIPTION A Deluge Bladder Tank Foam/Water System is a standard deluge system capable of discharging a foam/water solution automatically through open sprinklers, spray nozzles,

More information

94270 Vapor Guard Tank Blanketing Valve Vapor Guard Tank Blanketing Valve What is Tank Blanketing? Features How does it work?

94270 Vapor Guard Tank Blanketing Valve Vapor Guard Tank Blanketing Valve What is Tank Blanketing? Features How does it work? 94270 What is Tank Blanketing? blanketing systems are used to prevent the escape of liquid vapors into the atmosphere or to prevent moisture from entering a tank and contaminating its contents. A tank

More information

End Connection. Thread x Thread N/A N/A N/A N/A Flange x Flange N/A

End Connection. Thread x Thread N/A N/A N/A N/A Flange x Flange N/A Worldwide Contacts www.tyco-fire.com Model RV-1 Pressure Relief Valve, Pilot-Operated, Globe and Angle Body Styles General Description Valves, through inch (DN50 through DN00), are factory assembled and

More information

TECHNICAL DATA CAUTION

TECHNICAL DATA CAUTION Page 1 of 12 1. DESCRIPTION The Viking Model C-2 Pilot Pressure Regulating Valve is a direct-acting, single-seated, spring-loaded diaphragm valve. When installed as a pilot regulating valve on a Viking

More information

BALANCED PRESSURE PROPORTIONERS

BALANCED PRESSURE PROPORTIONERS Balanced Pressure Proportioners BALANCED PRESSURE PROPORTIONERS INSTALLATION, OPERATION, AND MAINTENANCE MANUAL 004293_2016 One Stanton Street / Marinette, WI 54143-2542, USA / +1-715-735-7411 / www.ansul.com

More information

TECHNICAL DATA MAINTENANCE AIR COMPRESSOR MODEL G-1

TECHNICAL DATA MAINTENANCE AIR COMPRESSOR MODEL G-1 Dry 131h 1. DESCRIPTION The Viking Model G-1 Maintenance Air Compressor is an electric motor-driven, aircooled, single-stage, oil-less compressor. The unit is equipped with a check valve and provides a

More information

Model B-1 Pipe Line Strainer 3, 4, 6 & 8 Inch (DN80, DN100, DN150 & DN200) 175 psi (12,1 bar) General Description. Technical Data

Model B-1 Pipe Line Strainer 3, 4, 6 & 8 Inch (DN80, DN100, DN150 & DN200) 175 psi (12,1 bar) General Description. Technical Data Technical Services: Tel: (800) 381-312 / Fax: (800) 71-5500 Customer Service/Sales: Tel: (215) 362-0700 / (800) 523-6512 Fax: (215) 362-5385 Model B-1 Pipe Line Strainer 3,, 6 & 8 Inch (DN80, DN100, DN150

More information

TECHNICAL DATA. Deluge Valves 211a. November 30, 2007 DELUGE VALVE MODEL E-1 ANGLE STYLE 3 (DN80), 4 (DN100) & 6 (DN150)

TECHNICAL DATA. Deluge Valves 211a. November 30, 2007 DELUGE VALVE MODEL E-1 ANGLE STYLE 3 (DN80), 4 (DN100) & 6 (DN150) November 30, 2007 Deluge Valves 211a DESCRIPTION The Viking Model E-1 Deluge Valve is a quick-opening, differential diaphragm, fl ood valve with one moving mechanism. The deluge valve is used to control

More information

TECHNICAL DATA PILOT PRESSURE REGULATED DELUGE SYSTEM CONTROLLED BY PNEUMATIC RELEASE. 1. DESCRIPTION (Refer to Figures 1, 2 or 3.

TECHNICAL DATA PILOT PRESSURE REGULATED DELUGE SYSTEM CONTROLLED BY PNEUMATIC RELEASE. 1. DESCRIPTION (Refer to Figures 1, 2 or 3. Page 1 of 8 1. DESCRIPTION A Viking Pilot Pressure Regulated Deluge System utilizes a Viking Flow Control Valve to control water flow into the deluge system. The flow control valve must be installed with

More information

AIR FOAM CHAMBER DATA SHEET

AIR FOAM CHAMBER DATA SHEET FIRE FIGHTING EQUIPMENT DATA SHEET AIR FOAM CHAMBER DATA SHEET JOB NO. : RFQ. NO. : ISSUE : SHEET OF 01 CUSTOMER : ITEM NO. : 02 PROJECT : QUANTITY : 03 LOCATION : SERVICE : FOAM SYSTEM 04 05 CODE & STANDARDS

More information

TECHNICAL DATA PILOT PRESSURE REGULATED DELUGE SYSTEM CONTROLLED BY ELECTRIC RELEASE 1. DESCRIPTION 2. LISTINGS AND APPROVALS 3.

TECHNICAL DATA PILOT PRESSURE REGULATED DELUGE SYSTEM CONTROLLED BY ELECTRIC RELEASE 1. DESCRIPTION 2. LISTINGS AND APPROVALS 3. Page 1 of 8 1. DESCRIPTION A Viking Pilot Pressure Regulated Deluge System utilizes a Viking flow control valve to control water flow into the deluge system. The flow control valve must be installed with

More information

SECTION BUTTERFLY VALVES

SECTION BUTTERFLY VALVES SECTION 15112 BUTTERFLY VALVES PART 1 GENERAL 1.01 SUMMARY A. All butterfly valves shall be of the tight closing, rubber seated type and fully comply with the latest revision of AWWA Standard C504, Class

More information

The Shand & Jurs Model Vapor Guard Tank Blanketing Valve

The Shand & Jurs Model Vapor Guard Tank Blanketing Valve Lower maintenance due to fewer parts Occupies less space, less stress to tank Teflon is inert to most chemicals; extends service life Simplifies and lowers maintenance cost Optimizes flow of blanketing

More information

TECHNICAL DATA ACCELERATOR MODEL E-1

TECHNICAL DATA ACCELERATOR MODEL E-1 Page 1 of 10 1. PRODUCT DESCRIPTION The Viking Model E-1 Accelerator is a quick-opening device. When installed with the required external Anti-flood Device, the assembly is designed to increase the operating

More information

RELIEF VALVES. General Description

RELIEF VALVES. General Description RELIEF VALVES FOR CONDENSER SERVICE General Description Graham Viking Valves are produced in three basic designs: Horizontal, Vertical and Angle. The Horizontal and Angle valves are available with various

More information

OBSOLETE DESIGN DATA. Foam 301a. February 9, 1998

OBSOLETE DESIGN DATA. Foam 301a. February 9, 1998 February 9, 1998 Foam 301a A BLADDE TANK WITH HYDAULICALLY ACTUATED DELUGE CONCENTATE CONTOL VALVE 1. DESCIPTION A Preaction Bladder Tank Foam/Water System is a standard preaction system capable of discharging

More information

TECHNICAL DATA. Inlet Type Outlet Type OBSOLETE. 4. TECHNICAL DATA Approvals:

TECHNICAL DATA. Inlet Type Outlet Type OBSOLETE. 4. TECHNICAL DATA Approvals: February 11, 2005 Deluge Valves 218 a 1. PRODUCT NAME Viking Model F-1 Deluge Valve 8" - Manufactured since 2002 4" & 6" - Manufactured since 2003 2-1/2" & 3" - Manufactured since 2004 2. MANUFACTURER

More information

AWWA C504 COMPLIANT VALVES FROM 3 THRU 108

AWWA C504 COMPLIANT VALVES FROM 3 THRU 108 AWWA C504 COMPLIANT VALVES FROM 3 THRU 108 PO Box 411 Berwick PA 18603 800-247-VALV www.crispinvalve.com 500 SERIES: Sizes 3-20 Available The K-Flo 500 Series is a heavy-duty resilient seated butterfly

More information

TECHNICAL DATA 36 GALLON FOAM BLADDER TANK FOAM HOSE STATION 1. GENERAL DESCRIPTION 2. LISTINGS AND APPROVALS

TECHNICAL DATA 36 GALLON FOAM BLADDER TANK FOAM HOSE STATION 1. GENERAL DESCRIPTION 2. LISTINGS AND APPROVALS Page 1 of 8 1. GENERAL DESCRIPTION The Bladder Tank Foam Hose Station is an effective and compact method of supplying a supplementary hose line as required by NFPA 409. It is particularly useful for applications

More information

TECHNICAL DATA. Page 1 of 8. model f /2 (dn40) & 2 (dn50)

TECHNICAL DATA. Page 1 of 8. model f /2 (dn40) & 2 (dn50) Page 1 of 8 1. DESCRIPTION The Viking Model F-1 Deluge Valve is a quick opening, differential diaphragm, flood valve with one moving mechanism. The Deluge Valve is used to control water flow in Deluge

More information

TECHNICAL DATA DELUGE VALVE, MODEL F-1 STRAIGHT THROUGH STYLE

TECHNICAL DATA DELUGE VALVE, MODEL F-1 STRAIGHT THROUGH STYLE Page 1 of 10 1. DESCRIPTION The Viking Model F-1 Deluge Valve is a quick opening, differential diaphragm and flood valve with one moving mechanism. The Deluge Valve is used to control water flow in Deluge

More information

TECHNICAL DATA. Deluge Valves 218a. November 30, 2007 DELUGE VALVE MODEL F-1 STRAIGHT THROUGH STYLE 2-1/2 (DN65) - 8 (DN200)

TECHNICAL DATA. Deluge Valves 218a. November 30, 2007 DELUGE VALVE MODEL F-1 STRAIGHT THROUGH STYLE 2-1/2 (DN65) - 8 (DN200) November 30, 2007 Deluge Valves 218a DESCRIPTION The Viking Model F-1 Deluge Valve is a quick opening, differential diaphragm and fl ood valve with one moving mechanism. The Deluge Valve is used to control

More information

Model C Pipe Line Strainer 6, 8 & 10 Inch (DN150, DN200 & DN250) 250 psi (17,2) General Description. Technical Data. Page of 6 MAY, 2006 TFP1644

Model C Pipe Line Strainer 6, 8 & 10 Inch (DN150, DN200 & DN250) 250 psi (17,2) General Description. Technical Data. Page of 6 MAY, 2006 TFP1644 Technical Services: Tel: (00) 31-9312 / Fax: (00) 791-5500 Model C Pipe Line Strainer 6, & 10 Inch (150, & 250) 250 psi (17,2) General Description The welded steel body Model C Pipe Line Strainers (Ref.

More information

Rules for the Installation, Inspection and Testing of Air Reservoirs (Other than on Locomotives)

Rules for the Installation, Inspection and Testing of Air Reservoirs (Other than on Locomotives) Rules for the Installation, Inspection and Testing of Air Reservoirs (Other than on Locomotives) December 5, 1994 TM Rules for the Installation, Inspection and Testing of Air Reservoirs (Other than on

More information

PTF4 Pivotrol Pump (patented) version Dual Mechanism - Pressure Powered Pump

PTF4 Pivotrol Pump (patented) version Dual Mechanism - Pressure Powered Pump Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

TECHNICAL DATA. Trimpac 247a_Euro. September 16, 2013

TECHNICAL DATA. Trimpac 247a_Euro. September 16, 2013 September 16, 2013 Trimpac 247a_Euro 1. DESCRIPTION DEsCrIpTIoN TRIMPAC Model B-11 LPCB Type 1 is a factory assembled trim package for a single interlocked electric release module in a metal enclosure.

More information

Technical Data. Approvals UL and C-UL Listed FM Approved. Maximum Working Pressure 250 psi (7,2 bar) Friction Loss Refer to Graphs A and B

Technical Data. Approvals UL and C-UL Listed FM Approved. Maximum Working Pressure 250 psi (7,2 bar) Friction Loss Refer to Graphs A and B Worldwide ontacts www.tyco-fire.com Model Pipe Line Strainer General Description The welded steel body Model Pipe Line Strainers (Ref. Figures 1 and 2) are designed for installation in the water supply

More information

Foam Chamber Model-FC

Foam Chamber Model-FC Tel: 00-44-8450751042 Fax: 00-44-8450751043 Email: info@fireguard-uk.com 2nd FLOOR 145-157 ST.JOHNS STREET LONDON EC1V 4PY UNITED KINGDOM Foam Chamber Model-FC TECHNICAL DATA : MODEL SIZE inlet WORKING

More information

CLEAN AGENT FIRE EXTINGUISHING SYSTEM MX 1230 Extinguishing Agent Cylinders

CLEAN AGENT FIRE EXTINGUISHING SYSTEM MX 1230 Extinguishing Agent Cylinders The technical data described herein is for components of the Minimax Fire Products MX 30 Clean Agent System. For design, installation, and operation instructions, refer to the latest edition of the original

More information

MSC Guidelines for Independent Fuel Tanks

MSC Guidelines for Independent Fuel Tanks References: Contact Information a. 46 CFR 58.50 (Independent Fuel Tanks) b. 46 CFR 119.440 (Independent Fuel Tanks) c. 46 CFR 182.440 (Independent Fuel Tanks) C. J. Robuck, LCDR, Chief, Engineering Division

More information

TECHNICAL DATA SINGLE INTERLOCKED PREACTION SYSTEM WITH PNEUMATIC RELEASE

TECHNICAL DATA SINGLE INTERLOCKED PREACTION SYSTEM WITH PNEUMATIC RELEASE 1 of 10 1. DESCRIPTION (Refer to Figures 1-3.) Viking supervised Single Interlocked Preaction Systems utilize a Viking Deluge Valve and a pneumatically pressurized automatic sprinkler system. The system

More information

CERTIFICATION OF COMPLIANCE OF THE USER S DESIGN SPECIFICATION

CERTIFICATION OF COMPLIANCE OF THE USER S DESIGN SPECIFICATION CERTIFICATION OF COMPLIANCE OF THE USER S DESIGN SPECIFICATION I, the undersigned, being experienced and competent in the applicable field of design related to pressure vessel requirements relative to

More information

ANDERSON GREENWOOD SERIES 9000 POSRV INSTALLATION AND MAINTENANCE INSTRUCTIONS

ANDERSON GREENWOOD SERIES 9000 POSRV INSTALLATION AND MAINTENANCE INSTRUCTIONS Procedure-assembly-functional test and performance requirements 1 SCOPE 1.1 This document establishes the general procedure for assembly, functional testing and normal performance requirements of low Series

More information

American Society of Sanitary Engineering PRODUCT (SEAL) LISTING PROGRAM

American Society of Sanitary Engineering PRODUCT (SEAL) LISTING PROGRAM American Society of Sanitary Engineering PRODUCT (SEAL) LISTING PROGRAM ASSE STANDARD #1048 - REVISED: 2009 Double Check Detector Fire Protection Backflow Prevention Assemblies Separate, complete laboratory

More information

Bermad Pressure Reducing. Model: 42T

Bermad Pressure Reducing. Model: 42T Bermad Pressure Reducing Pilot Operated Pressure Control Valve Model: 42T Installation Operation Maintenance Manual (IOM) REV. 27.7.17 Page 1 of 12 Safety First BERMAD believes that the safety of personnel

More information

Model TB 3-16 TECHNICAL BULLETIN. Secure-Gard Pilot Operated Vent Valve (POVV) BENEFITS TYPICAL APPLICATIONS FEATURES

Model TB 3-16 TECHNICAL BULLETIN. Secure-Gard Pilot Operated Vent Valve (POVV) BENEFITS TYPICAL APPLICATIONS FEATURES TECHNICAL BULLETIN 1049 - TB 3-16 Model 1049 Secure-Gard Pilot Operated Vent Valve (POVV) ISO Registered Company The Model 1049 is a pilot operated vent valve specifically designed for low-pressure storage

More information

Ford Service Saddles and Tapping Sleeves

Ford Service Saddles and Tapping Sleeves Section AA 5/2001 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487

More information

TECHNICAL DATA CAUTION

TECHNICAL DATA CAUTION Page 1 of 6 1. DESCRIPTION The Viking Model D-2 Accelerator is a quick-opening device, with an integral anti-flood assembly, used to increase the operating speed of a differential type dry pipe valve.

More information

TECHNICAL DATA. System water supply pressure enters the priming chamber of the deluge valve (A.1) through the 1/4 (8 mm) priming line, which

TECHNICAL DATA. System water supply pressure enters the priming chamber of the deluge valve (A.1) through the 1/4 (8 mm) priming line, which January 27, 2012 307a 1. (Refer to Figures 1-3.) A Viking Non-Interlocked Preaction system utilizes a Viking Deluge Valve to control water flow into system piping equipped with closed sprinklers. Under

More information

Homestead Series 820 AWWA Butterfly Valves

Homestead Series 820 AWWA Butterfly Valves Homestead Series 820 AWWA Butterfly Valves Dependable Valves for Water & Wastewater Service BODY: The ductile iron body meets or exceeds the design strength requirements of the AWWA C504 standards. Flange

More information

SCA Series Inverted Bucket Steam Traps

SCA Series Inverted Bucket Steam Traps 0770050/5 IM-P077-06 ST Issue 5 SCA Series Inverted Bucket Steam Traps Installation and Maintenance Instructions 1. General safety information 2. General product information 3. Installation 4. Commissioning

More information

TECHNICAL DATA OBSOLETE

TECHNICAL DATA OBSOLETE January 11, 2007 Dry 122a PRODUCT DESCRIPTION The Viking Model E-1 Accelerator is a quick-opening device. When installed with the required external Anti-fl ood Device, the assembly is designed to increase

More information

LARGE R/W GATE VALVES

LARGE R/W GATE VALVES The original, and the definitive standard. LARGE R/W GATE VALVES 24 THROUGH 54 STYLE 7000 AWWA C515 250 PSI NSF 61 Certified Fusion Bond Epoxy Coated 10 Year Limited Warranty M&H Valve is a division of

More information

PRESSURE TANKS HANDLING & INSTALLATION INSTRUCTIONS INSTALLATION MANUAL CONTROL VALVES

PRESSURE TANKS HANDLING & INSTALLATION INSTRUCTIONS INSTALLATION MANUAL CONTROL VALVES PRESSURE TANKS HANDLING & INSTALLATION INSTRUCTIONS CONTROL VALVES INSTALLATION MANUAL TABLE OF CONTENTS Receiving & Handling 3 Basic Handling Continued 4 Approved Lifting Methods 5 Installing Pressure

More information

Mark 958 Series Sanitary Gas Back Pressure Regulators

Mark 958 Series Sanitary Gas Back Pressure Regulators Mark 958 Series Sanitary Gas Back Pressure Regulators (3/4" - 1") The Mark 958 Sanitary Gas Back Pressure Regulator is the ideal valve for low back pressure gas regulation for blanketing, motive force,

More information

MSC Guidelines for Pressure Vessels

MSC Guidelines for Pressure Vessels References: a. 46 CFR Part 54 Pressure Vessels S. T. Brady, CDR, Chief, Engineering Division b. ASME Boiler and Pressure Vessel Code (BPVC), Section VIII, Division 1, (1998 Edition) c. Navigation and Inspection

More information

Team Insert Valve Sample Specification The Insert Valve shall conform to the following:

Team Insert Valve Sample Specification The Insert Valve shall conform to the following: Team Insert Valve Sample Specification The Insert Valve shall conform to the following: The Ductile Iron 250 p.s.i.g. Insert Valve shall be a Resilient Wedge Gate Valve designed for use in potable water,

More information

VIKING OBSOLETE CONCENTRATE CONTROL SYSTEM OPERATING, MAINTENANCE, AND FILLING MANUAL. Vertical And Horizontal Bladder Tanks

VIKING OBSOLETE CONCENTRATE CONTROL SYSTEM OPERATING, MAINTENANCE, AND FILLING MANUAL. Vertical And Horizontal Bladder Tanks VIKING CONCENTRATE CONTROL SYSTEM OPERATING, MAINTENANCE, AND FILLING MANUAL Vertical And Horizontal Bladder Tanks Form F_030498 New pages issued March 4, 1998 March 4, 1998 i DESIGN DATA TABLE OF CONTENTS

More information

Section GATE VALVES

Section GATE VALVES Section 02521 PART 1 GENERAL 1.01 SUMMARY This Section includes the furnishing and installation of gate valves for isolation and dead-end service as shown on Plans and as specified herein. 1.02 MEASUREMENT

More information

FXT. FXT Cooling Tower RIGGING & ASSEMBLY INSTRUCTIONS

FXT. FXT Cooling Tower RIGGING & ASSEMBLY INSTRUCTIONS FXT FXT Cooling Tower RIGGING & ASSEMBLY INSTRUCTIONS FXT Cooling Towers should be rigged and assembled as outlined in this bulletin. These procedures should be thoroughly reviewed prior to the actual

More information

Blowdown vessels Meeting the requirements of HSE PM60

Blowdown vessels Meeting the requirements of HSE PM60 Blowdown vessels Meeting the requirements of HSE PM60 BDV60 blowdown vessels A complete range of equipment for the safe disposal of boiler blowdown Boiler blowdown Steam boilers must be blown down to remove

More information

SECTION SHOWER AND BATH ENCLOSURES. Display hidden notes to specifier by using Tools / Options / View / Hidden Text.

SECTION SHOWER AND BATH ENCLOSURES. Display hidden notes to specifier by using Tools / Options / View / Hidden Text. SECTION 10185 SHOWER AND BATH ENCLOSURES Display hidden notes to specifier by using Tools / Options / View / Hidden Text. PART 1 GENERAL 1.1 SECTION INCLUDES A. Bathtub wall enclosures. B. Shower wall

More information

Installation, Operation and Maintenance Manual for Back Pressure Regulator

Installation, Operation and Maintenance Manual for Back Pressure Regulator Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN

More information