Fall Protection / Open Holes & Guardrail

Size: px
Start display at page:

Download "Fall Protection / Open Holes & Guardrail"

Transcription

1 Fall Protection / Open Holes & Guardrail 1. Leading Edges Policy Statement It is GW Communications policy that any worker exposed to a fall 6 or greater, shall be protected from coming into contact with the level below. Only Competent Persons are allowed to conduct elevated work. A. Leading Edges: Leading edges that present a potential fall greater than 6 should be protected with guardrail systems. B. Fall Restraint: Fall restraint systems may be implemented by restricting the worker s approach to a leading edge. C. Fall Arrest: When guardrails and fall restraint systems are found to be impractical, fall arrest systems may be implemented. 2. Holes and Floor Openings A. Types of Protection: All augured holes, manholes, floor and roof openings shall be protected by means of coverings or guardrail systems. B. Securing Covers: The cover must be secured from displacement. Cleats under the cover will not be used. C. Cover Requirements; Covers must display a sign that is clearly and permanently marked OPEN HOLE DO NOT REMOVE. Page 1 of 6

2 D. Strength Requirements.: Covers must be able to withstand 2 times the maximum load it can be subjected to. If equipment or traffic has a potential of being loaded on the cover, steel traffic plates will be used ply board will suffice foot traffic. E. Guardrail: Standard guardrail with toe boards must meet or exceed strength and design requirements for guardrail outlined in this chapter. F. Approaching Unprotected Holes and Floor Openings: Personal fall protection systems shall be used when making an approach to any unprotected hole or floor opening. 3. Excavations A. When to Protect: When an excavation s depth presents a leading edge of 6 or greater, or a slope that is at 40% or steeper, that excavation must be protected by guardrail systems, coverings or barricades. B. Drilled Holes: Fall protection is required within 6 if the hole is 6 or deeper and 2 or more in diameter. C. Barricades: When barricades are used they must form a continuous barrier around the opening and be no closer than 6 to the opening s edge. 4. Guardrail Systems A. Suitable Materials: Wood, metal and cable systems that meet the strength requirements may be used. Cable systems must be secured with a minimum of 3 cable clamps. B. Strength Requirements: All of the components to any guardrail system must be able to withstand 200 lbs. in any direction. If cable system is used, it must have less than 3 of deflection. C. Dimensions: 1. Stantions must be no more than 8 apart. 2. Toprail must be between 42 and Midrail must be half the elevation of the toprail. 4. Toe board must be at least 3 ½ high. Page 2 of 6

3 Fall Protection Fall Restraint Systems A. PPE: A full body harnesses shall be used for fall restraint purposes. B. Anchorage Point: Workers shall be tethered to a substantial object in a manner that will limit the workers approach to the leading edge. 6. Fall Arrest Systems A. Approved Products: Only OSHA and/or ANSI approved products shall be used in fall arrest systems. Components used shall only be manufactured domestically. Fall Arrest systems must be designed by a Qualified Person preferably a PE. B. PPE: A full body harness must be used on fall arrest systems. Only the D ring at the center of the wearers back shall be used for fall arrest purposes. C. Rescue: A means of prompt rescue is required in the event of a fall. D. Inspection: All fall protection components shall be inspected prior to each use. It should also be inspected annually by a qualified person. E. Anchorages: Anchorage points shall have a minimum breaking strength of 5000lbs. per person. F. Tie-Off Points: Tie off points shall be above the workers head when practical. Under any circumstance, the worker shall not come into contact with the level below. G. Self Retracting Lifelines: Self-retracting lifelines shall be used. Lanyards are not be used on GWC unless approved by the LOB Manager or the Safety Manager. Only one device is permitted in the rear D-ring at one time. H. Personal Equipment: Personal Fall Protection shall not be permitted on the Projects. Only equipment supplied by the Project will be used on site. Page 3 of 6

4 7. Horizontal Lifelines A. Design: The design of a Horizontal Lifeline System shall be done by a certified engineer. Tabulated data must be obtainable upon request. If the designer does not meet the certified engineer s criteria, the system shall be tested. Results of the test must be obtainable upon request. Cable must be secured with a minimum of 3 cable clamps. Clamps must be of US or Canadian manufacturer. See Section 5 for allowed materials. B. Components: All components must be manufactured domestic and rated for the required strengths (5000lbs. per person). C. Lifeline Deflection: Under no circumstances shall a worker come into contact with the level below, lifeline deflection must be taken under consideration. D. Testing: 1. Testing is required when: a. The strength of anchorage points is unknown. b. The strength of any of the components is unknown. 2. Testing shall be done by a competent person. 3. The test and its results shall be documented in the Site Specific Fall Protection Plan. It is recommended that the test be photographed and/or video taped. 4. The actual test components may not be revised for fall protection. 8. Vertical Access A. Options & Height Limitations: Wherever practical, utilize access to the work that does not require tieoff, such as 1. Stairways. 2. Stair towers. 3. Inclined ladders up to 30 in height, or vertical ladders up to 20 in height. (Refer to Section 3.12 Ladders) B. Vertical Lifelines: Where ladders are not practical or exceed the height requirements, a vertical lifeline with a ladder climbing device (rope grab) must be used. Page 4 of 6

5 C. Ascending and Descending: While climbing or moving to a work area, use either a rope grab or a double legged lanyard where one of the lanyard legs is secured before the other lanyard is unhooked. 9. Falsework Operations A. Procedure: When assembling or dismantling frames while exposed to a fall of 6 or more, workers should be tied off using standard fall protection equipment. However, if this is not practical, a worker may be permitted to stand on two planks without the benefit of fall protection. This rule only applies when the worker is handling frames and cross braces. While working on top jacks, caps, stringers or similar items, the worker must be tied off. B. Planning: Falsework operation must be thoroughly planned in advance with the intention of minimizing the risk of accidental falls as well as other hazards. Page 5 of 6

6 10. Training: Prior to any employee working from heights they must go through training. Training will be documented with the name of the employee, date of training and person conducting the training with their signature as certification of training. If the work scope changes, new hazards arise, the employee violated a safety procedure or a hazardous event occurred the employee must be retrained prior to being allowed to work from heights again. 11. Alternative Fall Protection The use of Fall Protection Systems not mentioned in this Manual must be approved by the Safety Manager prior to installation. This includes but is not limited to Controlled Access Zones, Safety Nets, Safety Monitor and Warning Line Systems. 12. Safety Monitor If a safety monitor system is approved it must be implemented by a competent person who can recognize fall hazards, warn other employees of fall hazards if they are unaware or acting unsafely. The monitor should also be on the same level as the employees and in visual sight with verbal communication. Safety Monitors cannot be assigned any other task while conducting monitor duties. 13. Rescue Each project will develop rescue procedures to ensure a worker that has fallen can be reached within 5 minutes of the fall to, at a minimum, relieve the pressure exerted by the body on the harness. This may be accomplished by using Manlifts, scissor lifts, high angle rescue box, ladders, or self rescue devices. Once initial pressure has been removed, the worker must be rescued within 15 minutes of the fall. The Project Manager has overall responsibility to ensure all personnel are trained and the proper equipment is used on site. In the event of an accident or near miss he will lead the investigation to ensure no reoccurrence of such event. Page 6 of 6

1.0 Scope and Application

1.0 Scope and Application 1.0 Scope and Application This policy contains safety requirements to protect employees from falls of six (6) feet or more when performing elevated work except on ladders and scaffolding (See Ladders and

More information

Competent Person - Fall Protection Presented by Turner Safety- your instructor is Steve Turner

Competent Person - Fall Protection Presented by Turner Safety- your instructor is Steve Turner Competent Person - Fall Protection Presented by Turner Safety- your instructor is Steve Turner 1 Falls in Construction Falls are the leading cause of deaths in the construction industry. Most fatalities

More information

FALL PROTECTION COMPARISON BETWEEN VARIOUS OSHA STANDARDS, NAVY and EM 385 (2008) REQUIREMENTS

FALL PROTECTION COMPARISON BETWEEN VARIOUS OSHA STANDARDS, NAVY and EM 385 (2008) REQUIREMENTS Requirements FALL PROTECTION COMPARISON BETWEEN VARIOUS OSHA STANDARDS, NAVY and EM 385 (2008) REQUIREMENTS Navy FP Chapter 13 of OPNAVINST 5100.23G (2005) and Fall Protection Guide for Ashore Facilities

More information

Risk Control at United Fire Group

Risk Control at United Fire Group In the United States, falls are the leading cause of fatalities on a construction site. Employers and employees need to do the following: Where protection is required, select fall protection systems appropriate

More information

FALL PROTECTION WORK PLAN (Alstom Power Installation Canada)

FALL PROTECTION WORK PLAN (Alstom Power Installation Canada) FALL PROTECTION WORK PLAN (Alstom Power Installation Canada) Location: Unit: Foreman: Task: Supervisors Ensure: Workers must review and sign this fall protection work plan prior to starting work in an

More information

workplace fatalities involving falls to a lower level. Fall related fatalities make up 16% of workplace fatalities

workplace fatalities involving falls to a lower level. Fall related fatalities make up 16% of workplace fatalities 2013 574 workplace fatalities involving falls to a lower level Fall related fatalities make up 16% of workplace fatalities Bureau of Labor Statistics Passive Fall Prevention Fall Arrest Fall Restraint

More information

??????? is committed to providing a safe work environment for its employees and preventing occupational injuries due to falls.

??????? is committed to providing a safe work environment for its employees and preventing occupational injuries due to falls. Intent??????? is committed to providing a safe work environment for its employees and preventing occupational injuries due to falls. Fall Protection is an integral part of our commitment to a safe work

More information

FALL PROTECTION / ELEVATED WORK

FALL PROTECTION / ELEVATED WORK SEPTEMBER CORE REFRESHER HSE TOOL BOX FALL PROTECTION / ELEVATED WORK FALL PROTECTION Falls from elevations are one of the most common causes of death in this industry. OSHA requires fall protection when

More information

FALL PROTECTION GUIDELINE

FALL PROTECTION GUIDELINE FALL PROTECTION GUIDELINE July 2001 Table of Contents INTRODUCTION...3 CONTROL MEASURES...4 SURFACE PROTECTION...4 FIXED BARRIERS...5 EXAMPLES OF GUARDRAIL...6 WARNING BARRIERS...7 HANDRAILS...8 SURFACE

More information

Applying Construction Fall Protection Concepts to General Industry

Applying Construction Fall Protection Concepts to General Industry Applying Construction Fall Protection Concepts to General Industry Applying Construction Fall Protection Concepts to General Industry Michael Tesmer, CSP and David Jewell, CSP Conney Safety Products This

More information

Overview. Identify fall hazardous areas Describing potential fall hazards How appropriate portable and extension ladders are used

Overview. Identify fall hazardous areas Describing potential fall hazards How appropriate portable and extension ladders are used FALL PROTECTION Overview Identify fall hazardous areas Describing potential fall hazards How appropriate portable and extension ladders are used Fall Protection All situations that expose personnel to

More information

ARKANSAS TECH UNIVERSITY FACILITIES MANAGMENT HEALTH AND SAFETY MANUAL

ARKANSAS TECH UNIVERSITY FACILITIES MANAGMENT HEALTH AND SAFETY MANUAL FALL PROTECTION (PERSONAL FALL ARREST SYSTEMS) 15.0 The purpose of this policy is to specify procedures and training for the safety of the employees in the Facilities Management Group while working on

More information

At the end of this presentation you should know the difference between fall prevention, fall restraint, and fall arrest.

At the end of this presentation you should know the difference between fall prevention, fall restraint, and fall arrest. 0 At the end of this presentation you should know the difference between fall prevention, fall restraint, and fall arrest. We will review the hazards associated with fall protection and how to mitigate

More information

FALL PROTECTION PROGRAM (OHS-0010)

FALL PROTECTION PROGRAM (OHS-0010) () For Issued: December 17, 2007 Revised: 1 st Issue PAGE 1 OF 17 Table of Contents 1.0 Purpose...2 2.0 Document Control...2 2.1 Approvals...2 2.2 Responsibility...2 3.0 Definitions...3 4.0 Objective...7

More information

New Mexico Institute of Mining & Technology. Fall Protection Program

New Mexico Institute of Mining & Technology. Fall Protection Program New Mexico Institute of Mining & Technology Fall Protection Program REGULATORY STANDARDS: OSHA - 29 CFR 1910.66 29 CFR 1910.128, 129, 130, 131, (Proposed) 29 CFR 1926.104 29 CFR 1926.500 BASIS: Approximately

More information

DREW UNIVERSITY FALL PROTECTION PROCEDURE (DRAFT 12/11)

DREW UNIVERSITY FALL PROTECTION PROCEDURE (DRAFT 12/11) PURPOSE The objective of this policy & guideline is to eliminate the potential for injuries and fatalities to employees and contractors resulting from falls from elevated work areas at Drew University

More information

FALL PROTECTION (SAF-SPI-06)

FALL PROTECTION (SAF-SPI-06) 1. PURPOSE To describe the Ontario Operations standard methods for preventing serious injury resulting from fall from heights and to provide a Standard for Fall Protection to safeguard employees who work

More information

Appendix C Fall Protection Hazard Assessment and Rescue Plan

Appendix C Fall Protection Hazard Assessment and Rescue Plan Appendix C Fall Protection Hazard Assessment and Rescue Plan Department: Address: Jobsite Location: Date Prepared/Modified: Plan Prepared by: Signature: Plan Approved By: Signature: Plan Supervised by:

More information

8. Fall Protection Procedures WAC

8. Fall Protection Procedures WAC 1.0 Fall Protection Introduction 8. Fall Protection Procedures WAC 296-155-245 If an employee is exposed to a fall hazard of ten (10) feet or more in height, the employee must use a fall restraint, fall

More information

Doc No: FPP CARDINAL SURVEYS COMPANY. Safety Management System. Initial Revision Date: Version Revision No. 02 FALL PROTECTION

Doc No: FPP CARDINAL SURVEYS COMPANY. Safety Management System. Initial Revision Date: Version Revision No. 02 FALL PROTECTION Revision Preparation: Safety Mgr Authority: President Issuing Dept: Safety Page: Page 1 of 10 Purpose The purpose of this program is to provide fall protection procedures to prevent injury to employees

More information

Subparts D and I Walking-Working Surfaces & Personal Protective Equipment Final Rule

Subparts D and I Walking-Working Surfaces & Personal Protective Equipment Final Rule Subparts D and I Walking-Working Surfaces & Personal Protective Equipment Final Rule OSHA s Mission To Assure So Far as Possible Every Working Man and Woman in the Nation Safe and Healthful Working Conditions...

More information

Fall Protection ABC s

Fall Protection ABC s Fall Protection ABC s Chris Caron American Safety & Supply, Inc. Fall Protection ABC Itinerary Review types of fall arrest systems Review and discuss ladder safety Discuss the various components of fall

More information

CPWR - The Center for Construction Research and Training. Fall Hazard Identification and Control Audit of the Aria Building. City Center Project

CPWR - The Center for Construction Research and Training. Fall Hazard Identification and Control Audit of the Aria Building. City Center Project CPWR - The Center for Construction Research and Training Fall Hazard Identification and Control Audit of the Aria Building City Center Project Las Vegas, Nevada September, 2008 Submitted by Mark Fullen

More information

Title- Fall Protection Effective Date: 03 Jan 14 Revision-0

Title- Fall Protection Effective Date: 03 Jan 14 Revision-0 Whaley Steel Corp Environment, Health & Safety Manual Section-3.0 Title- Fall Protection Effective Date: 03 Jan 14 Revision-0 1.0 PURPOSE 1.1 The purpose of the fall protection program is to: ensure all

More information

CHAPTER 10 FALL PROTECTION

CHAPTER 10 FALL PROTECTION CHAPTER 10 FALL PROTECTION A. INTRODUCTION... 1 B. CHAPTER-SPECIFIC ROLES and RESPONSIBILITIES... 2 C. HAZARD IDENTIFICATION... 3 1. Job Hazard Analysis (Jha).... 3 2. Fall Hazards... 3 D. HAZARD CONTROL...

More information

Fall Protection Introduction

Fall Protection Introduction Fall Protection Introduction Date: District: Site: Time: Department: Manager/Supervisor Name: In 1995, 1,048 construction workers died on the job, with 32 percent, or 335 of them, resulting from falls.

More information

FALL PROTECTION LADDERS ACCESSWAYS

FALL PROTECTION LADDERS ACCESSWAYS FALL PROTECTION LADDERS ACCESSWAYS PORTABLE LADDERS Max. Height 20 Step Ladder For small hand tool use only Must have non-slip feet Top step is not to be stood on Wood ladders not to be painted See COE

More information

Fall Protection 4/7/16

Fall Protection 4/7/16 Fall Protection 4/7/16 Passive Fall Prevention Fall Restraint Fall Arrest Inspection/Maintenance 1910.23 Guarding Floor and Wall Openings and Holes 1910.66 Powered Platforms, Manlifts and Vehicle Mounted

More information

EXHIBIT A FALL PROTECTION POLICY

EXHIBIT A FALL PROTECTION POLICY EXHIBIT A FALL PROTECTION POLICY Table of Contents I. Statement of Company Policy... 3 II. Fall Protection Systems to Be Used on This Project... 4 Safety Monitoring System... 5 Control Zone System... 5

More information

VERSION 1.0 FEBRUARY 1, 2017 FALL PROTECTION AND ELEVATED WORK UNC CHARLOTTE 9201 UNIVERSITY CITY BLVD., CHARLOTTE, NC 28223

VERSION 1.0 FEBRUARY 1, 2017 FALL PROTECTION AND ELEVATED WORK UNC CHARLOTTE 9201 UNIVERSITY CITY BLVD., CHARLOTTE, NC 28223 VERSION 1.0 FEBRUARY 1, 2017 FALL PROTECTION AND ELEVATED WORK UNC CHARLOTTE 9201 UNIVERSITY CITY BLVD., CHARLOTTE, NC 28223 Table of Contents I. Purpose... 3 II. Scope... 3 III. Program Responsibilities...

More information

Walking-Working Surfaces and Fall Protection Standards Update. OSHA General Industry

Walking-Working Surfaces and Fall Protection Standards Update. OSHA General Industry Walking-Working Surfaces and Fall Protection Standards Update OSHA General Industry Background Slips, trips, and falls account for a majority of all general industry injury incidents. Caused 849 workplace

More information

Progressive Safety Services LLC

Progressive Safety Services LLC 1910.23 Guarding Floor and Wall Openings and Holes 1910.66 Powered Platforms, Manlifts and Vehicle Mounted Work Platforms. 1926.500 Fall Protection 1926.501 Duty to Have Fall Protection 1926.502 Fall Protection

More information

11.4 FALL-ARREST SYSTEM AND EQUIPMENT CHECKLIST (Must answer yes to all applicable questions)

11.4 FALL-ARREST SYSTEM AND EQUIPMENT CHECKLIST (Must answer yes to all applicable questions) 11.4 FALL-ARREST SYSTEM AND EQUIPMENT CHECKLIST (Must answer yes to all applicable questions) This checklist shall be completed either by the Competent Person or a person trained and designated by the

More information

ROOFING FALL PROTECTION 27.I

ROOFING FALL PROTECTION 27.I ROOFING FALL PROTECTION 27.I Prior to the start of work, a structural analysis of the roof shall be conducted by a Qualified Person to assure that the load capacity of the roof deck will not be exceed.

More information

FALL PROTECTION PLAN July 2012

FALL PROTECTION PLAN July 2012 FALL PROTECTION PLAN July 2012 Office of Police and Safety (423)323.0255 Introduction In the construction industry in the United States, falls are the leading cause of worker fatalities. Each year, on

More information

Centennial Fall Protection Work Plan _CP_11_20_en_A1

Centennial Fall Protection Work Plan _CP_11_20_en_A1 Centennial Fall Protection Work Plan 0206500_CP_11_20_en_A1 Project Title: Contract and Task Order Number: Project Location (be specific, include Bldg. # / Floor / grid / etc.): PSO/SSHO Name: Complete

More information

Fall Protection Checklist. Guardrail System

Fall Protection Checklist. Guardrail System Fall Protection Checklist Location/Department: Date of Inspection: Inspectors: Corrective Actions: Work order/memos were issued: Yes No Date issued: In accordance with the MIOSHA and OSHA standards the

More information

SECTION FACILITY FALL PROTECTION PART I - GENERAL

SECTION FACILITY FALL PROTECTION PART I - GENERAL SECTION 11 24 29 - FACILITY FALL PROTECTION PART I - GENERAL 1.1 The Illinois Department of Labor (IDOL) regulates fall protection for general industry and construction in the public sector under the Illinois

More information

2.2. Anchorage Point A secure point of attachment for Lifelines, lanyards or deceleration devices.

2.2. Anchorage Point A secure point of attachment for Lifelines, lanyards or deceleration devices. Title: Elevated Walking/Working Surfaces (Fall Protection) Site Function: Safety Procedure No.: MC032.122 Page: 1 of 16 McIntosh Site Reviewed: 02/2013 Effective: 03/2013 Supersedes: 08/2012 Preparer:

More information

Why Update. OSHA updated Walking Working Standard. Who & What it Covers. Housekeeping (a) 6/25/ nd Leading cause of Workplace fatalities

Why Update. OSHA updated Walking Working Standard. Who & What it Covers. Housekeeping (a) 6/25/ nd Leading cause of Workplace fatalities OSHA updated Walking Working Standard Why Update 2nd Leading cause of Workplace fatalities $70 Billion Workers Comp Cost - US 100+ Million lost workdays/year - US Cari Gray, CSP Safety Consultant Ohio

More information

Fall Protection. 29 CFR Appendix C 29 CFR 1926 Subpart M

Fall Protection. 29 CFR Appendix C 29 CFR 1926 Subpart M Fall Protection 29 CFR 1910.66 Appendix C 29 CFR 1926 Subpart M Duty to Have Fall Protection Provide fall protection systems which meet the criteria of 1926 and 1910 Make fall protection an integral part

More information

Reviewed: New Effective: 5/18/12 Supersedes: New Preparer: Owner: Approver: Team Member, Occupational Safety Industrial Hygiene

Reviewed: New Effective: 5/18/12 Supersedes: New Preparer: Owner: Approver: Team Member, Occupational Safety Industrial Hygiene Procedure No.: BC032.027 Page: 1 of 15 Preparer: Owner: Approver: Team Member, Occupational Safety Industrial Hygiene Manager, Occupational Safety Industrial Hygiene Vice President, Ecology & Safety (Signature

More information

Signature: Director of Environmental Health & Safety. Fall Protection

Signature: Director of Environmental Health & Safety. Fall Protection North Carolina Agricultural and Technical State University OFFICE OF ENVIRONMENTAL HEALTH & SAFETY Safety Manual Subject: Fall Protection Number: 9-1 Date: August 1, 2017 Amends: None Supersedes: Page

More information

Fall Protection Refresher Orientation. Fall Protection Refresher Orientation 1

Fall Protection Refresher Orientation. Fall Protection Refresher Orientation 1 Fall Protection Refresher Orientation Fall Protection Refresher Orientation 1 Course Objectives! Understand the definitions of fall prevention, fall restraint, and fall arrest.! Understand the requirements

More information

Fall Protection Program

Fall Protection Program Page 1 of 13 Sect: 1.0 Purpose The purpose of the fall protection program is to: o Ensure all work areas are free from uncontrolled fall hazards. o Ensure all employees are properly trained in fall prevention

More information

Walking-Working Surfaces Fall Protection Program

Walking-Working Surfaces Fall Protection Program Purpose Walking-Working Surfaces Fall Protection Program The purpose of this program is to provide procedures to eliminate, prevent, and control hazards from falls from heights. Scope This program is applicable

More information

1.3 LIMITATIONS: The following application limitations must be recognized and considered before using this product:

1.3 LIMITATIONS: The following application limitations must be recognized and considered before using this product: 3965 Pepin Avenue Red Wing, MN 55066-1837 Toll Free: (800) 328-6146 Phone: (651) 388-8282 Fax: (651) 388-5065 www.protecta.com User Instruction Manual AJ720A Concrete Anchor This manual is intended to

More information

Fall Protection. Fall Protection

Fall Protection. Fall Protection Fall Protection Purpose The purpose of this section is to establish protective controls for personnel working at elevated heights which will prevent or minimize injury or death resulting from falls. Scope

More information

FALL PROTECTION PLAN INSTRUCTIONS

FALL PROTECTION PLAN INSTRUCTIONS Sonic Drilling Ltd. FALL PROTECTION PLAN INSTRUCTIONS Each employer must ensure that a fall protection system is used when work is done at a place from which a fall of 3 m (10 ft) or more may occur, or

More information

Fall Protection Resource Guide P AGE 1

Fall Protection Resource Guide P AGE 1 Fall Protection Resource Guide P AGE 1 As a Home Builder, we do not self-perform any work. This section is a resource guide only and is not intended to put any requirements on the company. All subcontractors,

More information

Safety Tips from the WorkSafe People

Safety Tips from the WorkSafe People Fall Protection Fall Protection Requirements Fall Hazard Locations Fall Prevention Personal Fall Arrest System 1 F AL5000(11/02) Fall Protection Any construction activity that exposes an employee to a

More information

Safe Work Practices (SWP) SWP (6) FALL PROTECTION PROGRAM

Safe Work Practices (SWP) SWP (6) FALL PROTECTION PROGRAM SWP (6) FALL PROTECTION PROGRAM The following information on Fall Protection has been based around the BC OHS Regulations, standards, policies and guidelines. Prior to starting work outside of BC, the

More information

To remind workers that falling from heights can result in serious injury. Enter your name and the training date on the Training Sign-In Sheet.

To remind workers that falling from heights can result in serious injury. Enter your name and the training date on the Training Sign-In Sheet. Safety Training Topic Purpose of Meeting To remind workers that falling from heights can result in serious injury. To educate workers about fall prevention. To consider ways to prevent injuries cause by

More information

Fall Protection- Part 1

Fall Protection- Part 1 Optional Information Name of School: Date of Inspection: Vocational Program/Course/Room: Signature of Inspector: Fall Protection- Part 1 Self Inspection Checklist Instructions: This checklist covers some

More information

Health, Safety, Security and Environment

Health, Safety, Security and Environment Document owner and change code Document Owner Aaron Perronne Title HSSE Manager Mark X Change Code Description X N/A First Issue A Typographical/Grammatical correction; formatting change; text clarification-no

More information

Section 16B. Fall Protection. Falls are the second leading cause of death in the workplace. Factors contributing to falling incidents:

Section 16B. Fall Protection. Falls are the second leading cause of death in the workplace. Factors contributing to falling incidents: Section 16B. Fall Protection Falls are the second leading cause of death in the workplace. Factors contributing to falling incidents: 1. Personal factors Lack of concentration. Use of medication. Poor

More information

Fall Protection and Elevated Work

Fall Protection and Elevated Work Program No: SP-010 Page 1 1.0 PURPOSE AND INTRODUCTION Fall Protection and Elevated Work To establish fall protection safety procedures for Pitt County Schools employees engaged in any of the following

More information

New Walking-Working Surfaces and PPE (Fall Protection) Rule. Purpose of the New Rule

New Walking-Working Surfaces and PPE (Fall Protection) Rule. Purpose of the New Rule New Walking-Working Surfaces and PPE (Fall Protection) Rule John Olaechea Compliance Assistance Specialist OSHA Region VIII 1244 Speer Blvd Suite 551 Denver, CO 80204 720-264-6586 olaechea.john@dol.gov

More information

FACILITIES MANAGEMENT OFFICE OF ENVIRONMENTAL HEALTH AND SAFETY Fall Protection Policy 11/21/14 Last Revision

FACILITIES MANAGEMENT OFFICE OF ENVIRONMENTAL HEALTH AND SAFETY Fall Protection Policy 11/21/14 Last Revision FACILITIES MANAGEMENT OFFICE OF ENVIRONMENTAL HEALTH AND SAFETY Fall Protection Policy 11/21/14 Last Revision INTENT To provide written procedures and guidelines for all University at Albany employees

More information

Walking-Working Surfaces

Walking-Working Surfaces Walking-Working Surfaces 29 CFR 1910, Subpart D Presented by: Chesapeake Region Safety Council Rod Markley, CSP, CHST, CET Subpart D - Walking-Working Surface Topics we will cover: Background of rule Overview

More information

FALL PROTECTION

FALL PROTECTION 115500 FALL PROTECTION PART 1 GENERAL 1.01 General A. Cornell University seeks to prevent exposures to fall hazards whenever possible and protect personnel that may be exposed to fall hazards. Therefore,

More information

Written Program. For. Fall Protection. <<Company Name>> <<911 Address>> <<City, state, zip code>>

Written Program. For. Fall Protection. <<Company Name>> <<911 Address>> <<City, state, zip code>> Written Program For Fall Protection Table of Contents Purpose.. Page 1 Policy.. Page 1 Definitions. Page 1 Fall Protection Program Responsibilities

More information

The purpose of this training is to give field technicians awareness training and guidelines on potential hazards they may encounter in the field.

The purpose of this training is to give field technicians awareness training and guidelines on potential hazards they may encounter in the field. Purpose The purpose of this training is to give field technicians awareness training and guidelines on potential hazards they may encounter in the field. Fall Protection and Prevention JELD-WEN Field Employees

More information

29 CFR 1926, Subpart M. Fall Protection Program Table of Contents

29 CFR 1926, Subpart M. Fall Protection Program Table of Contents I. Objective II. Policy III. Assignment of Responsibility IV. Training V. Controlled Access Zones VI. Excavations VII. Fall Protection Systems A. Covers B. Guardrail Systems C. Personal Fall Arrest Systems

More information

OSHA 29CFR 1910 Subpart D Walking-Working Surfaces Content

OSHA 29CFR 1910 Subpart D Walking-Working Surfaces Content OSHA 29CFR 1910 Subpart D Walking-Working Surfaces Content 1910.28 Duty to have Fall Protection and Falling Object Protection 1910.29 Fall Protection Systems and Falling Object Protection Criteria and

More information

A. Employer Provide fall protection to effected employees Ensure that all employees understand and adhere to the procedures of this plan

A. Employer Provide fall protection to effected employees Ensure that all employees understand and adhere to the procedures of this plan SECTION 10: FALL PROTECTION PROGRAM Fisher Auto Parts is committed to promoting a safe and healthy environment for all employees and customers. Protection from accidental loss of any resources, especially

More information

REGULATIONS & COMPLIANCE. Riggers Safety LLC. 267 Winfield Cr. Corona, CA

REGULATIONS & COMPLIANCE. Riggers Safety LLC. 267 Winfield Cr. Corona, CA ANSI Z359 REGULATIONS & COMPLIANCE Riggers Safety LLC. 267 Winfield Cr. Corona, CA 92880. 951 371 8685. www.riggerssafety.com General Industry: ANSI/ASSE Z359 Fall Protection Code Package Version 3.0 ANSI/ASSE

More information

The content of this resource has been generously provided by the AGC Houston, the Associated General Contractors of America.

The content of this resource has been generously provided by the AGC Houston, the Associated General Contractors of America. Construction & Utilities Division Planning Tools The content of this resource has been generously provided by the AGC Houston, the Associated General Contractors of America. Guidelines for Creation of

More information

FALL PROTECTION PLAN FALL PROTECTION PROGRAM

FALL PROTECTION PLAN FALL PROTECTION PROGRAM FALL PROTECTION PLAN IMPORTANT: This document is intended to provide guidance only for developing site-specific fall protection plans for working at heights. FALL PROTECTION PLAN IMPORTANT: This document

More information

Safety Manual Page 1 of 15

Safety Manual Page 1 of 15 Safety Manual Page 1 of 15 1. Purpose The purpose of this policy is to establish the minimum requirements to safely work at heights on USPL premises or worksites. Additionally this program is written to

More information

Fall Protection. OSHA Office of Training & Education

Fall Protection. OSHA Office of Training & Education Fall Protection 1 Falls in Construction Falls are the leading cause of deaths in the construction industry. Most fatalities occur when employees fall from opensided floors and through floor openings. Falls

More information

FALL PROTECTION AND RESCUE PLAN NS-MAYPORT BLDG RENOVATION PROJECT. (Revised Copy 11/19/2010)

FALL PROTECTION AND RESCUE PLAN NS-MAYPORT BLDG RENOVATION PROJECT. (Revised Copy 11/19/2010) FALL PROTECTION AND RESCUE PLAN NS-MAYPORT BLDG. 1553 RENOVATION PROJECT (Revised Copy 11/19/2010) 1 TABLE OF CONTENTS 1.0 SCOPE AND PERSONNEL RESPONSIBLE FOR THE PLAN 2.0 STATEMENT OF COMPANY POLICY 3.0

More information

This information has been developed by an OSHA Compliance Assistance Specialist and is intended to assist employers, workers, and others as they

This information has been developed by an OSHA Compliance Assistance Specialist and is intended to assist employers, workers, and others as they New Walking-Working Surfaces and PPE (Fall Protection) Rule Disclaimer This information has been developed by an OSHA Compliance Assistance Specialist and is intended to assist employers, workers, and

More information

1 of 15. Policy Number 61. Last Update: March 21, Effective Date: 11/22/11 Resolution No Title: Fall Protection Policy POLICY STATEMENT

1 of 15. Policy Number 61. Last Update: March 21, Effective Date: 11/22/11 Resolution No Title: Fall Protection Policy POLICY STATEMENT Policy Number 61 Effective Date: 11/22/11 Resolution No. 476-11 Title: Fall Protection Policy Last Update: March 21, 2011 POLICY STATEMENT The objective of the Cayuga County (County) Fall Protection Policy

More information

Update 29 CFR Subparts D & I

Update 29 CFR Subparts D & I Because every life has a purpose Update 29 CFR 1910.30 Subparts D & I 1 OSHA & This Regulation OSHA has created regulations to protect workers from various hazards, including falls. OSHA has separate regulations

More information

Sample Fall Rescue Plan for Bridge Work

Sample Fall Rescue Plan for Bridge Work This document is intended to provide guidance for developing fall rescue plans for bridge contractors. The Occupational Safety and Health Administration s (OSHA) regulation 29 CFR 1926.502(d)(20) states:

More information

Occupational Protective Equipment

Occupational Protective Equipment Introduction One of the leading occupational dangers in today s workforce is the risk of death or injury due to falls. Falls from ladders, scaffolds, buildings, or other elevations have become the second

More information

Know Your ABCs FALL PROTECTION GUIDE

Know Your ABCs FALL PROTECTION GUIDE Know Your ABCs FALL PROTECTION GUIDE PEAKWORKS ABCs of Fall Arrest KNOW YOUR ABCs Fall arrest systems are the collection of equipment components that are configured to arrest a fall. There are several

More information

Department of Facilities Management. Occupational Health and Safety. Fall Protection Program

Department of Facilities Management. Occupational Health and Safety. Fall Protection Program Department of Facilities Management Occupational Health and Safety Fall Protection Program October 2016 1 1.0 INTRODUCTION This program has been developed to provide guidance to those managers and supervisors

More information

Fall Protection Program

Fall Protection Program Fall Protection Program Prepared by: The Ohio State University Environmental Health and Safety Occupational Safety & Industrial Hygiene 1314 Kinnear Road Columbus, OH 43212-1168 614-292-1284 Phone 614-292-6404

More information

Fall Protection University Facilities Internal Procedure: July 1, 2013 Effective date: July 1, 2013 Last Modified: April 2013 Approved by: Bob Wells

Fall Protection University Facilities Internal Procedure: July 1, 2013 Effective date: July 1, 2013 Last Modified: April 2013 Approved by: Bob Wells Fall Protection University Facilities Internal Procedure: July 1, 2013 Effective date: July 1, 2013 Last Modified: April 2013 Approved by: Bob Wells 1.0 Program Objective UF has adopted this policy to

More information

Environmental Health & Safety Programs

Environmental Health & Safety Programs 1.0 Introduction It is the goal of Radford University to protect all faculty, staff, and students from injuries caused by falls on campus. With this in mind, Environmental Health and Safety (EHS) developed

More information

Title: Fall Protection Effective Date: 5/20/2006 Control Number: THG_0003 Revision Number: 1 Date: 10/10/2015 Annual Review Completed: 5/13/2015

Title: Fall Protection Effective Date: 5/20/2006 Control Number: THG_0003 Revision Number: 1 Date: 10/10/2015 Annual Review Completed: 5/13/2015 Title: Fall Protection Effective Date: 5/20/2006 Control Number: THG_0003 Revision Number: 1 Date: 10/10/2015 Annual Review Completed: 5/13/2015 Fall Protection CONTENTS I. INTRODUCTION II. PURPOSE III.

More information

You may order this publication from WCB Publications and Videos, Please quote ordering number BK60.

You may order this publication from WCB Publications and Videos,  Please quote ordering number BK60. The following material is the property of the Workers Compensation Board of British Columbia and may not be reproduced by those outside of B.C. For those within British Columbia, this material may only

More information

FALL PROTECTION SAFETY PROGRAM

FALL PROTECTION SAFETY PROGRAM FALL PROTECTION SAFETY PROGRAM REGULATORY STANDARD: OSHA - 29 CFR 1910.66-29 CFR 1910.128, 129, 130, 131, (Proposed) - 29 CFR 1926.104-29 CFR 1926.500-503 BASIS: Approximately 300,000 disabling injuries

More information

Safety Tips from the WorkSafe People

Safety Tips from the WorkSafe People Fall Protection Glossary A Anchorage: A secure point of attachment for lifelines, lanyards or deceleration devices. B Body belt: A strap with means both for securing it about the waist and for attaching

More information

Fall Protection Training

Fall Protection Training Fall Protection Training Reference: OSHA 29CFR 1910 OSHA 29CFR 1926 ANSI Z359.1-1992 (R1999) Introduction Deaths occurring from falls during 1996 increased five percent over 1995 figures. This accounts

More information

Fall Protection Guidelines. Individual Unit Function: Safety Procedure No.: SOP-0111 Page: 1 of 13. Preparer: Owner: Approver: Safety Safety Safety

Fall Protection Guidelines. Individual Unit Function: Safety Procedure No.: SOP-0111 Page: 1 of 13. Preparer: Owner: Approver: Safety Safety Safety Procedure No.: SOP-0111 Page: 1 of 13 MIDGA Reviewed: 09/187/1 Effective: 09/17/17 Supersedes: Ver. 1.0 7 1. PURPOSE These guidelines are to provide minimum standards for work on corrugated roofing, structural

More information

1 AIM 2 4 REASONS FOR INCLUSION 3 6 PLANT AND EQUIPMENT REQUIREMENTS 4 7 SYSTEM AND PROCEDURAL REQUIREMENTS 4 8 PEOPLE REQUIREMENTS 6

1 AIM 2 4 REASONS FOR INCLUSION 3 6 PLANT AND EQUIPMENT REQUIREMENTS 4 7 SYSTEM AND PROCEDURAL REQUIREMENTS 4 8 PEOPLE REQUIREMENTS 6 CONTENTS PAGE 1 AIM 2 2 APPLICATION 2 3 DEFINITIONS 2 4 REASONS FOR INCLUSION 3 5 REQUIREMENTS 3 6 PLANT AND EQUIPMENT REQUIREMENTS 4 7 SYSTEM AND PROCEDURAL REQUIREMENTS 4 8 PEOPLE REQUIREMENTS 6 APPENDIX

More information

American National Standards Institute, ANSI Z359 Fall Protection Code Update

American National Standards Institute, ANSI Z359 Fall Protection Code Update NAVFAC SOUTHEAST American National Standards Institute, ANSI Z359 Fall Protection Code Update John Davis, SSM Prepared by: Basil Tominna, P.E. September 2010 29 June 2012 Introduction ANSI approved several

More information

User Instructions 1789 Parapet Wall Anchor

User Instructions 1789 Parapet Wall Anchor User Instructions 1789 Parapet Wall Anchor This manual is intended to meet the Manufacturer Instructions as required by ANSI Z359.1 and should be used as part of an employee training program as required

More information

Instructions for the following series products:

Instructions for the following series products: Instructions for the following series products: U-Bolt Roof Anchors (See back page for specific model numbers.) User Instruction Manual U-bolt Roof Anchor This manual is intended to be used as part of

More information

Reliance Industries, LLC Operating instructions for the / Bolt-on D-Ring Anchorage. Model # 3071

Reliance Industries, LLC Operating instructions for the / Bolt-on D-Ring Anchorage. Model # 3071 Reliance Industries, LLC Operating instructions for the 3071-1 / 3071-2 Bolt-on D-Ring Anchorage Model # 3071 Reliance Industries, LLC PO Box 140008 Denver, CO 80214 Ph. (800) 488-5751 Ph. (303) 424-8650

More information

Fall Protection PPT-SM-FALLPROT V.A.0.0

Fall Protection PPT-SM-FALLPROT V.A.0.0 Fall Protection 1 Introduction to Fall Protection Falls account for 13% of fatal injuries 11% of these fatal falls were to a lower level Workers may be required to perform tasks at great heights which

More information

LIGHTHOUSE SAFETY TRAINING 2018

LIGHTHOUSE SAFETY TRAINING 2018 Specialists in Fall Protection, Rescue and Confined Spaces tele (262) 790.1155 fax (262) 783-6211 www.lighthousesafety.com csr@lighthousesafety.com 3620 North 126th Street Brookfield, WI 53005 LIGHTHOUSE

More information

F a l l P r o t e c t i o n E x p e r t s. Subject: Use of Rope Grabs in Flat or Sloped Roof Applications

F a l l P r o t e c t i o n E x p e r t s. Subject: Use of Rope Grabs in Flat or Sloped Roof Applications No. RG001, Rev. B Subject: Use of Rope Grabs in Flat or Sloped Roof Applications The use of DBI/SALA Rope Grabs (model 5001441, 5001442) on flat or sloped roofs are acceptable as a means of fall protection

More information

Fall Protection Plan Environmental Health & Safety Office September 2017

Fall Protection Plan Environmental Health & Safety Office September 2017 September 2017 Table of Contents Tables and Figures... iii Foreword... v Document History... v 1.0 Introduction... 1 1.1 Purpose... 1 1.2 Scope... 1 1.3 Exceptions... 1 2.0 Roles and Responsibilities...

More information

Loss Control Alert. Preventing Falls in the Construction Industry

Loss Control Alert. Preventing Falls in the Construction Industry Loss Control Alert Preventing Falls in the Construction Industry Falls from heights are the leading cause of fatalities among construction workers. The Occupational Safety and Health Administration (OSHA)

More information

Fall Hazards, Anchor Points and Fall Clearances OSH-2 August 7, 0900

Fall Hazards, Anchor Points and Fall Clearances OSH-2 August 7, 0900 Fall Hazards, Anchor Points and Fall Clearances OSH-2 August 7, 2017 @ 0900 Phil Fincher, CIH, CSP Overview ANSI & OSHA Fall Protection Standards Definitions, Roles, & Responsibilities of Authorized, Competent,

More information

Fall Protection- Part 2

Fall Protection- Part 2 Optional Information Name of School: Date of Inspection: Vocational Program/Course/Room: Signature of Inspector: Fall Protection- Part 2 Self Inspection Checklist Instructions: This checklist covers fall

More information