WARNING! WARNING! ALWAYS WEAR A TMA APPROVED FALL ARREST SYSTEM WHEN USING ANY TREESTAND

Size: px

Start display at page:

Download "WARNING! WARNING! ALWAYS WEAR A TMA APPROVED FALL ARREST SYSTEM WHEN USING ANY TREESTAND"

Elaine Jenkins
6 years ago
Views:

1 WARNING! You must read and understand all of the following instructions before first use. If you do not, it could result in serious injury up to and including death. Any questions please call WARNING! Make sure you have read and understand all instructions. Practice first at ground level. Always wear TMA approved fall arrest system when using any treestand. Do not use while intoxicated or when taking medications that cause drowsiness. Do not attach to rotten, loose bark or dead trees, metal or utility poles. Avoid use during wet or icy conditions, or during lightning storms. Haul gun or bow up from ground after climbing tree. Platform is designed to hold one person only. Do not jump on platform or seat, nor should you stand on seat. Do not attempt to alter product in any way. Maximum load is 350 pounds, except where noted. Failure to follow these instructions could cause serious injury or death.

2 PRODUCT LINE INSTRUCTIONS MANUAL LONE WOLF PORTABLE TREESTANDS PO Box 62 Edwards, IL Phone: (309) Fax: (309)

3 WARNING! You must read and understand all of the following instructions before first use. If you do not, it could result in serious injury up to and including death. Any questions please call WARNING! Make sure you have read and understand all instructions. Practice first at ground level. Always wear TMA approved fall arrest system when using any treestand. Do not use while intoxicated or when taking medications that cause drowsiness. Do not attach to rotten, loose bark or dead trees, metal or utility poles. Avoid use during wet or icy conditions, or during lightning storms. Haul gun or bow up from ground after climbing tree. Platform is designed to hold one person only. Do not jump on platform or seat, nor should you stand on seat. Do not attempt to alter product in any way. Maximum load is 350 pounds, except where noted. Failure to follow these instructions could cause serious injury or death. 1

General Maintenance Make sure all nuts and bolts are secure before each use. Replace any worn or damaged parts with components from Lone Wolf. All bolts for this product are Grade 8.

) Replace every 5 years or when you observe any of the following: a.) belt has external cracks or tears visible b.) any internal cables are broken c.

4 General Maintenance Make sure all nuts and bolts are secure before each use. Replace any worn or damaged parts with components from Lone Wolf. All bolts for this product are Grade 8. POLYURETHANE TRACTION BELT APPLICABLE TO: Alpha Sit & Climb and Alpha Hand Climber 1.) With a permanent marker write date of 1st use on each belt. 2.) Inspect belt before each use 3.) Replace every 5 years or when you observe any of the following: a.) belt has external cracks or tears visible b.) any internal cables are broken c.) any teeth are offset from normal pitch or are torn or cut CORRECT INCORRECT (dia. 1) (dia. 2) CORRECT INCORRECT (dia. 1a) (dia. 2a) Shown is the proper use of the traction belt for the Lone Wolf Climbers (dia 1). The polyurethane belts are designed to be used on the Lone Wolf products only. Always use your traction in the position that it is shown in dia 1. Never use the belt in this position (dia. 2). Use in this position can cause damage to the traction belt. WARNING: Point of arrow marks the end of the belt (dia. 2a). No part of the arrow should be showing after the cams are engaged (dia. 1a). Any failure to follow the instructions may cause belt to disengage and cam to open. POLYESTER WEB BELTS APPLICABLE TO: Alpha Ladder Stand, Climbing Sticks, Elite Hang on, Alpha Hang On, Assault Hang On, and Assassin Platform, Pro Series Hang On & Climbing Sticks 1.) Inspect belts before each use 2.) Replace every 5 years or every year if left out yearly 3.) Replace belts if you observe any of the following: a.) cut or worn webbing b.) buckles are bent or cam release is binding c.) stitching is loose, cut, or becoming unraveled 4.) With a permanent marker write the date of the 1st use on each belt 3

5 WARNING! Make sure you have read and understand all instructions. Practice first at ground level. Always wear TMA approved fall arrest system when using any treestand. Do not use while intoxicated or when taking medications that cause drowsiness. Do not attach to rotten, loose bark or dead trees, metal or utility poles. Avoid use during wet or icy conditions, or during lightning storms. Haul gun or bow up from ground after climbing tree. Platform is designed to hold one person only. Do not jump on platform or seat, nor should you stand on seat. Do not attempt to alter product in any way. Maximum load is 350 pounds, except where noted. Failure to follow these instructions could cause serious injury or death. GENERAL MAINTENANCE Make sure all nuts and bolts are secure before each use. Replace any worn or damaged parts with components from Lone Wolf. All bolts for this product are Grade 8. POLYESTER WEB BELT Replace every 5 years or every 2 years if left out yearly. Inspect belts before each use. Replace belts when you observe any of the following: a.) Cut or worn webbing. b.) Buckles are bent or cam release is binding. c.) Stitching is loose, cut or becoming unraveled. d.) With permanent markers write date of first use on each belt. 15

an open position, center the offset bracket against the tree.

6 continued ASSAULT HANG ON (HOSAT) ALPHA HANG-ON (HOSSH) ELITE HANG ON (EHOS) SYSTEM 1: Offset Bracket (NOT to be used with EZ Hang Hook System) Step 1: While holding the stand in an open position, center the offset bracket against the tree. With the buckle in hand, wrap the belt around the tree and place the loop over the top versa button and pull the belt tight. 16

continued SYSTEM 1: Offset Bracket continued (NOT to be

up and pull the belt tight again to take up any additional

Pushing down on the rear of the seat at this time will

7 continued SYSTEM 1: Offset Bracket continued (NOT to be used with EZ Hang Hook System) Step 2: Lift the platform up and pull the belt tight again to take up any additional slack in the belt. Pushing down on the rear of the seat at this time will help to ensure a solid set. Step 3: Lower the platform. Your additional strap can be added at this time. 17

downward from your climbing sticks into the center of the platform.

8 continued SYSTEM 1: Offset Bracket continued (NOT to be used with EZ Hang Hook System) Step 4: Hold the seat and the tree with your hands. Your treestand should be positioned so that you are stepping downward from your climbing sticks into the center of the platform. SYSTEM 2: EZ Hang Hook (NOT to be used with Offset Bracket) Step 1: Fasten the belt hook assembly to the tree. Pull the belt tight. 18

Place the sewn loop over the top versa button and pull tight. You must use the belt on the top versa button when using the easy hang hook.

9 continued SYSTEM 2: EZ Hang Hook continued (NOT to be used with Offset Bracket) Step 2: Hang the stand onto the hook. Please NOTE: make sure to visually check that the hook is in the receiver. Step 3: Wrap the main belt around the tree. Place the sewn loop over the top versa button and pull tight. You must use the belt on the top versa button when using the easy hang hook. Center the platform against the tree and lower the platform. Step 4: Hold the seat and tree with your hands while stepping downward into the center of the platform. PLEASE NOTE: Your treestand should always be positioned so that you are always stepping downward from your climbing sticks into the center of your platform. 19

In order to level your platform, loosen both

Next, place the bar in the selected slot for a

Once that position is selected, re-tighten the

10 SYSTEM 3: Platform Leveler Shown is the platform leveling device. In order to level your platform, loosen both knobs. Next, place the bar in the selected slot for a level platform. Once that position is selected, re-tighten the knobs. continued SYSTEM 3: Seat Leveler The seat leveler can be adjusted by slightly screwing the leveling bolt in or out for your desired position. 20

See the latest from Lone Wolf at www.lonewolfstands.

11 See the latest from Lone Wolf at The Wolf Pack Lone Wolf Quiver and Quiver Stand Mount Wolf Jaws Combo Silent Tote For written and video instructions please visit 62

WARNING! WARNING! ALWAYS WEAR A TMA APPROVED FALL ARREST SYSTEM WHEN USING ANY TREESTAND

WARNING! WARNING! ALWAYS WEAR A TMA APPROVED FALL ARREST SYSTEM WHEN USING ANY TREESTAND WARNING! You must read and understand all of the following instructions before first use. If you do not, it could result in serious injury up to and including death. Any questions please call 309-691-9653.