SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
|
|
- Margery York
- 6 years ago
- Views:
Transcription
1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z ACME SCALE COMPANY 1801 Adams Ave San Leandro, CA Barbara Byrd Phone: CALIBRATION Valid To: August 31, 2019 Certificate Number: In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following calibrations 1 : I. Dimensional Parameter/Equipment Range CMC 2, 5 (±) Comments Linear Measurement 1D 3, 5 (0.25 to 6) in in % Caliper (6 to 24) in in % Steel rule II. Mechanical Parameter/Equipment Range CMC 2 (±) Comments Balances Class I and High Precision Scales mg Res mg Res. 0.1 mg Res. 1 mg Res. 2 mg Res. 5 mg Res. 1 mg to 50 g 1 mg to 0.2 kg 1 mg to 0.6 kg 1 mg to 1 kg 2 mg to 2 kg 5 mg to 5 kg mg mg 0.15 mg 0.88 mg 1.8 mg 4.4 mg weights and NIST Handbook 44 (A2LA Cert. No ) 08/10/2017 Page 1 of 6
2 Balances Class I and High Precision Scales 3 (cont) 10 mg Res. 20 mg Res. 50 mg Res. 100 mg Res. 10 mg to 10 kg 20 mg to 20 kg 50 mg to 50 kg 100 mg to 100 kg 8.8 mg 18 mg 44 mg 88 mg weights and NIST Handbook 44 Balances Class II High Precision Scales 3 10 mg Res. 20 mg Res. 50 mg Res. 100 mg Res. 200 mg Res. 500 mg Res mg Res mg Res mg Res mg Res. 10 mg to 1 kg 20 mg to 2 kg 50 mg to 5 kg 100 mg to 10 kg 200 mg to 20 kg 500 mg to 50 kg 1 g to 100 kg 2 g to 100 kg 5 g to 100 kg 10 g to 100 kg g g g g 0.17 g 0.41 g 0.83 g 1.6 g 4.1 g 8.2 g and Class 2 weights and NIST Handbook 44 Scales High Res. Unmarked lb Res lb Res lb Res lb Res lb Res lb Res lb Res lb Res lb Res lb Res lb Res. 0.1 lb Res. 0.2 lb Res. 0.5 lb Res. 1 lb Res. ( to 6) lb ( to 15) lb ( to 30) lb ( to 60) lb ( to 150) lb (0.001 to 300) lb (0.002 to 600) lb (0.005 to 1000) lb (0.01 to 2000) lb (0.02 to 3000) lb (0.05 to 5000) lb (0.1 to ) lb (0.2 to ) lb (0.5 to ) lb (1.0 to ) lb lb lb lb lb lb lb lb lb lb lb lb lb 0.24 lb 0.49 lb 0.91 lb NIST Class F weights and NIST Handbook 44 (A2LA Cert. No ) 08/10/2017 Page 2 of 6
3 Scales Industrial 3, lb Res lb Res lb Res lb Res lb Res lb Res lb Res lb Res. 0.1 lb Res. 0.2 lb Res. 0.5 lb Res. 1.0 lb Res. 2.0 lb Res. 5.0 lb Res lb Res lb Res lb Res lb Res. ( to 3) lb ( to 7.5) lb (0.001 to 15) lb (0.002 to 30) lb (0.005 to 75) lb (0.01 to 150) lb (0.02 to 300) lb (0.05 to 750) lb (0.1 to 1500) lb (0.2 to 3000) lb (0.5 to 5000) lb (1.0 to ) lb (2.0 to ) lb (5.0 to ) lb (10.0 to ) lb (10.0 to ) lb (20.0 to ) lb (20.0 to ) lb lb lb lb lb lb lb lb lb lb 0.17 lb 0.41 lb 0.83 lb 1.7 lb 4.1 lb 8.3 lb 13 lb 17 lb 26 lb NIST Class F weights and NIST Handbook 44 Weights Metric Class F 1 g 2 g 3 g 5 g 10 g 20 g 30 g 50 g 100 g 200 g 300 g 500 g 1 kg 2 kg 3 kg 4 kg 5 kg 10 kg 20 kg 25 kg 30 kg 0.27 mg 0.27 mg 0.29 mg 0.40mg 33 mg 33 mg 34 mg 35 mg 0.19 g weights and AP210s balance and GT 480 balance and PR5002 balance and SM 34K balance (A2LA Cert. No ) 08/10/2017 Page 3 of 6
4 Weights Avoirdupois Class F 1 oz ( g) 2 oz ( g) 4 oz ( g) 8 oz ( g) 0.05 lb ( kg) 0.1 lb ( kg) 0.2 lb ( kg) 0.3 lb ( kg) 0.5 lb ( kg) 1 lb ( kg) 2 lb ( kg) 3 lb ( kg) 5 lb ( kg) 10 lb ( kg) 20 lb ( kg) 25 lb ( kg) 50 lb ( kg) 1.1 mg 0.32 mg 0.45 mg 1.3 mg 0.55 mg 1.0 mg 1.5 mg 2.3 mg 33 mg 34 mg 0.19 g ASTM E617 Class 1 weights Force Measure with Weights 3 Tension and Compression ( to ) lbf Res. ( to 0.625) lbf Res. ( to 0.625) lbf Res. ( to 1.0) lbf Res. (0.001 to 5) lbf Res. (0.002 to 5) lbf Res. (0.005 to 5) lbf Res. (0.01 to 10) lbf Res. (0.01 to 10) lbf Res. (0.05 to 20) lbf Res. (0.1 to 50) lbf Res. (0 to 5) lbf (0 to 10) lbf (0 to 20) lbf (0 to 50) lbf (0 to 100) lbf (0 to 200) lbf (0 to 500) lbf (0 to 1000) lbf (0 to 2000) lbf (0 to 5000) lbf (0 to ) lbf lbf lbf lbf lbf lbf lbf lbf lbf lbf lbf 0.12 lbf ASTM E617 Class 6 weights NIST Class F weights (A2LA Cert. No ) 08/10/2017 Page 4 of 6
5 Force Measure with Calibrated Load Cells 3 Tension and Compression (0.001 to 0.01) N Res. (0.01 to 0.1) N Res. (0.01 to 0.1) N Res. (1 to 10) N Res. (1 to 10) N Res. (10 to 100) N Res. (10 to 100) N Res. (100) N Res. (50 to 100) N (50 to 100) N (100 to 1000) N (50 to 100) N (100 to 1000) N (1000 to 2000) N (2000 to 5000) N (50 to 1000) N (1000 to 5000) N (50 to 1000) N (1000 to 5000) N (1000 to 5000) N N N N N N 0.41 N 0.81 N 0.96 N 1.2 N 8.7 N 9.0 N 87 N Calibrated load cells III. Time and Frequency Parameter/Equipment Range CMC 2 (±) Comments Elapsed Time 3 (1 to 60) seconds (61 to 600) seconds 0.80 seconds 4.9 seconds Stopwatch 1 This laboratory offers commercial calibration and field calibration services. 2 Calibration and Measurement Capability Uncertainty (CMC) uncertainty is the smallest uncertainty of measurement that a laboratory can achieve within its scope of accreditation when performing more or less routine calibrations of nearly ideal measurement standards or nearly ideal measuring equipment. CMCs represent expanded uncertainties expressed at approximately the 95 % level of confidence, usually using a coverage factor of k = 2. The actual measurement uncertainty of a specific calibration performed by the laboratory may be greater than the CMC uncertainty due to the behavior of the customer s device and to influences from the circumstances of the specific calibration. 3 Field calibration service is available for this calibration and this laboratory meets A2LA R104 General Requirements: Accreditation of Field Testing and Field Calibration Laboratories for these calibrations. Please note the actual measurement uncertainties achievable on a customer's site can normally be expected to be larger than the CMC uncertainty found on the A2LA Scope. Allowance must be made for aspects such as the environment at the place of calibration and for other possible adverse effects such as those caused by transportation of the calibration equipment. The usual allowance for the actual uncertainty introduced by the item being calibrated, (e.g. Res.) must also be considered and this, on its own, could result in the actual measurement uncertainty achievable on a customer s site being larger than the CMC uncertainty. 4 Industrial Scales include Bench Scales, Counting Scales, Portable Scales, Floor Scales, Crane/Hanging Scales, Tank and Hopper Scales, Forklift/Lift Truck Scales and Force Measurement Gauges and Test Stands. (A2LA Cert. No ) 08/10/2017 Page 5 of 6
6 5 In the statement of CMC, percentages are expressed as a percent of the total distance of the given distance test. (A2LA Cert. No ) 08/10/2017 Page 6 of 6
7 Accredited Laboratory A2LA has accredited ACME SCALE COMPANY San Leandro, CA for technical competence in the field of Calibration This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This laboratory also meets ANSI/NCSL Z and R205 Specific Requirements: Calibration Laboratory Accreditation Program. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Presented this 10 th day of August President and CEO For the Accreditation Council Certificate Number Valid to August 31, 2019 For the calibrations to which this accreditation applies, please refer to the laboratory s Calibration Scope of Accreditation.
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 APPLIED TEST SYSTEMS 154 East Brook Lane Butler, PA 16002 Rob Carroll Phone: 724 283 1212 CALIBRATION Valid To: March 31, 2018 Certificate
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 APPLIED TEST SYSTEMS 154 East Brook Lane Butler, PA 16002 Rob Carroll Phone: 724 283 1212 CALIBRATION Valid To: February 29, 2020 Certificate
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z CALIBRATION
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 ROBB PRECISION TOOL SERVICES, INC. 2100 196th St SW, Suite 144 Lynnwood, WA 98036 Robert Robb Phone: 425 672
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 LEDFORD GAGE LAB, INC. 227 Industrial Dr. Mulvane, KS 67110 Blaine Johnson Phone: 316 777 9300 CALIBRATION Valid To: December 31, 2019
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CAPSTONE CALIBRATION 7016 Baker Blvd Richland Hills, TX 76118 Jon T. Cappa Phone: 817 284 2707 CALIBRATION Valid To: January 31, 2020
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 THE L.S. STARRETT COMPANY 121 Crescent Street Athol, MA 01331 Harold J. Bacon Phone: 978 249 3551 CALIBRATION Valid To: October 31,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 FLUKE CALIBRATION, PHOENIX PRIMARY PRESSURE AND FLOW LABORATORY 4765 East Beautiful Lane Phoenix, AZ 85044 Mike DiGioia Phone: 602 773
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Antibus Scales & Systems, Inc. 1919 Research
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 ANSI/NCSL Z540-1-1994 ISO-CAL NORTH AMERICA 36610 N 20 th Street Phoenix, AZ 85086 Erik Naranen Phone: 480 336 8133 Fax: 480 336 8737 enaranen@isocalnorthamerica.com
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z TROXLER ELECTRONICS LABORATORIES, INC. James Pratt Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 TROXLER ELECTRONICS LABORATORIES, INC. James Pratt Phone: 919 314 2707 CALIBRATION Valid To: See Footnote 5 Certificate Number: 3260.01
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. PRECISION MEASURING CORP Groesbeck Hwy. Fraser, MI Robert Meyer Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PRECISION MEASURING CORP. 33250 Groesbeck Hwy. Fraser, MI 48026 Robert Meyer Phone: 586 293 4420 CALIBRATION Valid To: September 30, 2019 Certificate Number:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CORPORATE CONSULTING, SERVICE, & INSTRUMENTS, INC. University Park, 221 Beaver Street Akron, OH 44304 Michael Kent Warner Phone: 330 376 3600 CALIBRATION Valid
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 FIRSTENERGY BETA LABORATORY 6670 Beta Drive Mayfield Village, OH 44143 William Coll Phone: 440 604 9889 CALIBRATION Valid To: November
More informationAccredited Laboratory
Accredited Laboratory A2LA has accredited CAL-RITE CORPORATION Naperville, IL for technical competence in the field of Calibration This laboratory is accredited in accordance with the recognized International
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 FLUKE CALIBRATION, PHOENIX PRIMARY PRESSURE AND FLOW LABORATORY 4765 East Beautiful Lane Phoenix, AZ 85044 Mike DiGioia Phone: 602 773
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORYACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Reynosa, Tamaulipas, México CP. 88650 (Hereinafter
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: UNEX/HYTORC, 333 Route 17 North, Mahwah, NJ 07430
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: 12100 West 6 th Avenue, Lakewood, CO 80225 (Hereinafter
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationCALIBRATION CERTIFICATE # 500
CALIBRATION CERTIFICATE # 5 Calibration date : -- Certificate issued : --8 Company name Company address City, Province, Canada CLAS 9- Calibration of Mass flow meter Brooks SLA585S S/N : ABCD QUALITY PROGRAM
More informationTG GUIDELINES CONCERNING CALIBRATION INTERVALS AND RECALIBRATION
GUIDELINES CONCERNING CALIBRATION INTERVALS AND RECALIBRATION Approved By: Senior Manager: Mpho Phaloane Revised By: Field Manager: Neville Tayler Date of Approval: 2015-08-26 Date of Implementation: 2015-08-26
More informationSupersedes: The copy of this document located on Measurement Canada s website is considered to be the controlled copy.
Bulletin Category: GAS Bulletin: G-23 Page: 1 of 7 The copy of this document located on Measurement Canada s website is considered to be the controlled copy. Recognition of data from specialty gas suppliers
More informationSpecific Accreditation Criteria Calibration ISO IEC Annex. Mass and related quantities
Specific Accreditation Criteria Calibration ISO IEC 17025 Annex Mass and related quantities January 2018 Copyright National Association of Testing Authorities, Australia 2014 This publication is protected
More informationGUIDANCE FOR THE APPLICATION OF EQUIPMENT CALIBRATION AND TRACEABILITY OF MEASUREMENTS ON INSPECTION BODIES
GUIDANCE FOR THE APPLICATION OF EQUIPMENT CALIBRATION AND TRACEABILITY OF MEASUREMENTS ON INSPECTION BODIES ESYD G-DIAKRIB/01/01/26-03-2015 1/6 ESYD G-DIAKRIB Issue: 01 Revision: 01 Issue Date: 28-11-2007
More informationKENYA ACCREDITATION SERVICE
KENAS-GUD-016 01 16/03/2013 16 / 04/2013 GUD Page 1 of 18 Approval and Authorisation Completion of the following signature blocks signifies the review and approval of this Document. Name Job Title / Role
More informationCRITERIA FOR LABORATORY ACCREDITATION IN MASS METROLOGY
CRITERIA FOR LABORATORY ACCREDITATION IN MASS METROLOGY Prepared by: SADCAS Advisory Committee CLAP Approved by: SADCAS CEO. Approval Date: 2018-03-19 Effective Date: 2018-04-01 Table of Contents Page
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CHESAPEAKE TESTING SERVICES INC. 1 4603B Compass Point Rd. Belcamp, MD 21017 Chris Schueler Phone: 410 297 8154 chris.schueler@chesapeaketesing.com www.chesapeaketesting.com
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CHESAPEAKE TESTING SERVICES INC. 1 4603B Compass Point Rd. Belcamp, MD 21017 Chris Schueler Phone: 410 297 8154 chris.schueler@chesapeaketesing.com www.chesapeaketesting.com
More informationENGINEERING TECHNICAL REPORT
SSP DUOLOK FITTINGS ON 1.000 x 0.139 WALL 316SS TUBING ENGINEERING TECHNICAL REPORT SSP 8250 Boyle Parkway Twinsburg, Ohio 44087 U.S.A. mysspusa.com 1.330.425.4250 1 TABLE OF CONTENTS 1.0 Introduction
More informationCertified Accuracy. Ring Force Gauge. Models and Capacities Available. Design and Principle of Operation
Certified Accuracy Ring Force Gauge The accurate measurement of mechanical forces is required in hundreds of applications from a simple weighing procedure to the calibration of testing machines and load
More informationRecommended Practices for Calibration Laboratories
Recommended Practices for Calibration Laboratories May 1999 General This document recommends environmental practices and documentary and operational protocols for calibration laboratories that provide
More informationPerformance Overview calibration Laboratory EP Instruments Messtechnik und Kalibrierung GmbH
Performance Overview calibration Laboratory EP Instruments Messtechnik und Kalibrierung GmbH 1 D-K-15143-01-00 Services around the measurement technology in Germanys most accurate DAkkS laboratory*. Whether
More informationBeamex. Calibration White Paper. Weighing scale calibration - How to calibrate weighing instruments
Beamex Calibration White Paper info@beamex.com Weighing scale calibration - How to calibrate weighing instruments Weighing scale calibration - How to calibrate weighing instruments Weighing scales, weighing
More informationCRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF PRESSURE METROLOGY
CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF PRESSURE METROLOGY Approved By: Chief Executive Officer: Ron Josias Senior Manager: Mpho Phaloane Revised By: Specialist Technical Committee Date of
More informationDFX II Series. Digital Force Gauge
DFX II Series Digital Force Gauge Functions and Features Simple Operation User friendly four button operation for; Peak, Units, Zero and Info. PEAK- change from Normal to Peak mode UNITS- select desired
More informationCRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF MASS METROLOGY
CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF MASS METROLOGY Approved By: Chief Executive Officer: Ron Josias Senior Manager: Mpho Phaloane Revised By: Specialist Technical Committee Members Date
More informationGas mixtures. Individual solutions specifically for your application
Gas mixtures Individual solutions specifically for your application For many applications besides pure gases also defined gas mixtures are required. For many routine applications, from operating gases
More informationDate of Shipment: Xxxxx 00, 20xx 3402c National Institute of Advanced Industrial Science and Technology National Metrology Institute of
Date of Shipment: Xxxxx 00, 20xx 3402c01151112-170831 National Metrology Institute of Japan Reference Material Certificate NMIJ CRM 3402-c01 Sulfur Dioxide This certified reference material (CRM) was produced
More informationFPG8601 Force Balanced Piston Gauge
FPG8601 Force Balanced Piston Gauge Reference Level Calibration System for very low pressure Pressure range: 0 to 15 kpa gauge, absolute and absolute differential Standard resolution: 0.010 Pa, high resolution
More informationAccreditation for In-Service Inspection of Transportable Pressure Receptacles (TPRs)
RG 3 Edition 4 December 2018 Accreditation for In-Service Inspection of Transportable Pressure Receptacles (TPRs) RG 3 / Edition: 4 Page 1 of 8 Contents 1. Introduction 2 2. Scope - Inspection Services
More informationGMC-I Service GmbH Calibration Center
2016 GMC-I Service GmbH Calibration Center DAkkS, ISO & Factorycalibration www.gmci-service.com From spare parts, reparation, rental service, maintenance of industrial health and safety standards, calibration
More informationGeneral Accreditation Guidance. User checks and maintenance of laboratory balances
General Accreditation Guidance User checks and maintenance of laboratory balances January 2018 Copyright National Association of Testing Authorities, Australia 2010 All intellectual property rights in
More informationKeeping It Simple. Gas Mixtures for Stack Emissions Monitoring.
Keeping It Simple Gas Mixtures for Stack Emissions Monitoring www.uk.airliquide.com Stack Emissions Monitoring The Stack Emissions Monitoring market has undergone substantial legislative and quality changes
More informationPrecision pressure sensor Basic version Model CPT6020
Calibration Precision pressure sensor Basic version Model CPT6020 WIKA data sheet CT 25.13 Applications Calibration technology High-accuracy pressure monitoring Pressure sensing in critical applications
More informationTest pumps. Pressure sources. Good reasons for proper and reliable calibration
Test pumps Pressure is one of the most commonly measured quantities in engineering, which is why exact and reliable pressure measurement is especially important. However, the characteristics of the even
More informationUKAS calibration laboratory 8809 Temperature, pressure and electrical signals calibration guide
ABB MEASUREMENT & ANALYTICS PRODUCT GUIDE PG/SMD140 EN REV. B UKAS calibration laboratory 8809 Temperature, pressure and electrical signals calibration guide Measurement made easy UKAS calibration laboratory
More informationB ADDENDUM # 1
B0001572 ADDENDUM # 1 FROM: Kim Sowell Campus Box 12 Ph: 316-978-3784 Fax: 316-978-3528 TO: All Bidders DATE: 1/3/2019 NEW CLOSING DATE AND TIME: 1/15/2019 @ 2:00 PM SUBJECT: B0001572 Addendum Load Cells,
More informationInspection and Acceptance of Asphalt Mix Design Laboratories
Supplemental Technical Specification for Inspection and Acceptance of Asphalt Mix Design Laboratories SCDOT Designation: SC-M-405 (05/1/14) 1. SCOPE 1.1 This specification covers the process for inspection
More informationPressure is our Business
Pressure is our Business Count on gauges and calibrators that perform Wherever you work Reduce Measurement Error Protect against diminished accuracy from environmental conditions, accidental damage, and
More information2014 Programme of Training Courses in Measurement & Calibration
2014 Programme of Training Courses in Measurement & Calibration NSAI National Metrology Laboratory offers public courses to help individuals gain the skills that they require in the field of Measurement
More informationInterlaboratory comparison in the pressure range from 0 to 2 MPa for accredited calibration laboratories
Int. J. Metrol. Qual. Eng. 6, 307 (2015) c EDP Sciences 2015 DOI: 10.1051/ijmqe/2015021 Interlaboratory comparison in the pressure range from 0 to 2 MPa for accredited calibration laboratories Lovorka
More informationPneumatic High-Speed Pressure Controller Model CPC3000
Calibration Technology Pneumatic High-Speed Pressure Controller Model CPC3 Applications Industry (laboratory, workshop and production) Pressure transmitter manufacture Calibration service companies Research
More informationEN ISO/IEC Technical Requirements
EN ISO/IEC 17025 - Technical Requirements Wolfgang Garche Environmental Protection Agency Department Air Quality Monitoring, Information, Assessment 1 What means accreditation in accordance to EN ISO/IEC
More informationUnique mounting features for Thermal Mass Flow Meters. By Martin Raab in cooperation with CaTeC b.v.
Unique mounting features for Thermal Mass Flow Meters By Martin Raab in cooperation with CaTeC b.v. Development and production of sensors and transmitters for: humidity dew point CO2 O2 air velocity mass
More informationCALIBRATION SERVICES HUMIDITY DEW POINT AIR VELOCITY MASS FLOW TEMPERATURE CO 2 PRESSURE. (+34)
CALIBRATION SERVICES HUMIDITY DEW POINT AIR VELOCITY MASS FLOW TEMPERATURE CO 2 PRESSURE (+34) 968 162 005 www.sensovant.com comercial@sensovant.com www.epluse.com CALIBRATION AT THE HIGHEST LEVEL The
More informationMET-101 Introduction to Metrology
Pasig city Tel: 654-13-42 MET-101 Introduction to Metrology This 2-day course offers a basic introduction into Metrology, meant for people who are working in calibration and testing labs, maintenance services
More informationK V A L I F I K. Our accreditation number: NAH /2015. Valid to:
KVALIFIK Ltd. has founded in 1991. In 1993 our calibration laboratory has get the accredited status and we have calibrated standards for the generally used physical parameters. Our standards are traceable
More informationCertification of AMS acc. EN 15267, Part 3 - Overview and First Experience -
Certification of AMS acc. EN 15267, Part 3 - Overview and First Experience - Dr. Wolfgang Jockel, Martin Schneider, TÜV Rheinland Group, D-51105 Cologne / Germany 1. Introduction A new basis for the certification
More informationInspection and Approval of Asphalt Mix Design Laboratories
Supplemental Technical Specification for Inspection and Approval of Asphalt Mix Design Laboratories SCDOT Designation: SC-M-405 (06/07) 1. SCOPE 1.1 This method covers the process for inspection and approval
More informationTechnical Datasheet ZHA Series Gear Flow Meters Aluminum Version with ball bearing for lubricating media
www.kem-kueppers.com Technical Datasheet ZHA Series Gear Flow Meters Aluminum Version with ball bearing for lubricating media Certified zertifiziert according gemäß to DIN DIN EN EN ISO ISO 9001 9001 2
More informationCompiled by: B Beard. Approved by: SH Carstens. Description of requirements and procedures for compact provers to be used as verification standards.
1. Scope Description of requirements and procedures for compact provers to be used as verification standards. 2. Reference documents Trade Metrology Act SANS1698 3. Policy A. BASIC REQUIREMENTS Compact
More information20. Technical Equipment. Archived. This section applies to all equipment used in forensic examinations, such as
Instruments and Equipment Introduction 5.5. Authorization to use technical equipment 5.5.3 Use of instruments and equipment Instruction and maintenance manuals 5.4. 5.5.3 Use of nonlaboratory equipment
More informationHigh-speed pressure sensor Model CPT6140
Calibration technology High-speed pressure sensor Model CPT6140 WIKA data sheet CT 25.11 Applications Testing technology Calibration technology Laboratories and maintenance shops Leak and burst applications
More informationVaisala Pressure, RH & Temp. Transmitter. The instrument was operational upon receipt. The instrument was adjusted and calibrated.
Asset #: 123 Calibration - Certificate No: 2083.01 Customer: Condition: Action Taken: Sample Inc. 123 Sample Rd. Sample, MA 01234 The instrument was operational upon receipt. The instrument was adjusted
More informationIt s not like other pressure gauges
It s not like other pressure gauges Stronger. Tougher. Better. Dropped, Submerged, Over-Pressurized and it still reads accurately! Submersible: Sealed against dust and water. IP67 certified for 30 minutes
More informationLow Profile Load Cells
Low Profile Load Cells World Leading Performance With Improved Linearity, Hysteresis, Creep & Thermal Performance Introducing Interface s Enhanced Low Profile Load Cell Interface Inc. pioneered the first
More informationLight Lab. Reliable Measurements through Regular Calibration. DAkkS
Light Lab Reliable Measurements through Regular Calibration QM DAkkS ARS 85 EYREIENCEG QM EXP Benefits of Calibration PERFECTION THROUGH CALIBRATION RIN EASU HT M OLOGY IG L IN ECHN T LEGAL CERTAINTY Avoidance
More informationZHM ST Series. Technical Datasheet. Gear Flow Meters for lubricating, non lubricating, abrasive and corrosive fluids
www.kem-kueppers.com Technical Datasheet ZHM ST Series Gear Flow Meters for lubricating, non lubricating, abrasive and corrosive fluids Certified zertifiziert according gemäß to DIN DIN EN EN ISO ISO 9001
More information7250 Sys. Ruska Multi-Range Pressure Calibration System. GE Sensing & Inspection Technologies. Features. Applications
GE Sensing & Inspection Technologies 7250 Sys Ruska Multi-Range Pressure Calibration System Features Fully integrated multi-range pressure test and calibration systems Select either an eight range or the
More informationMTS Restan. Automatic System for Residual Stress Measurement by Hole-Drilling
Automatic System for Residual Stress The MTS3000 - Restan system for measuring residual stresses Fully automatic drilling and acquisition process ensuring high repeatability High speed drilling (400,000
More informationCalibrating a Micropipette
Calibrating a Micropipette Martin de Groot Kelvin Training This paper discusses the calibration of pipette, with particular attention to the type that is used and calibrated most frequently. This is the
More informationJOS 15 JOS 25 JOS 40. Manual and semiautomatic test benches from DN 25 to DN 40. Characteristics. Basic characteristics. Test bench using balances
TEST BENCHES JOS 15 JOS 25 JOS 40 Manual and semiautomatic test benches from DN 25 to DN 40 02 Characteristics Compact test benches - all in one room Designation - for residential and apartment meters
More informationTechnical Information Conducal CLY421
TI00496C/07/EN/01.12 71142150 Products Solutions Services Technical Information Conducal CLY421 Conductivity calibration set for ultrapure water applications Factory calibrated measurement box Certified
More informationDeadweight Tester / Pressure Balance High pressure up to 5,000 bar / 70,000 psi CPB5000-HP. Applications. Special features. Description. Rel.
High up to 5,000 bar / 70,000 psi CPB5000-HP Rel. 20150206 Applications Primary standard for defining the scale in a range up to 5,000 bar Reference instrument for testing, adjusting and calibrating measuring
More informationOXFORD CALIBRATION WEIGHTS CLASS E1, E2, F1
OXFORD CALIBRATION WEIGHTS CLASS E1,, and TECHNICAL INFORMATION EuroCal Calibration Services - Balance service and calibration - Weight calibration - Pipette service and calibration GENERAL SPECIFICATION
More informationJCSS accredited laboratory Endress+Hauser Japan
JCSS accredited laboratory Endress+Hauser Japan ISO 17025 Global flow calibration Slide 1 Contents Overview of Endress+Hauser Global calibration concept Calibration service in Japan Slide 2 Overview of
More informationHow to evaluate pressure measurement specifications
How to evaluate pressure measurement specifications Application Note There are thousands of different pressure measuring devices out there. How do you decide which instruments to invest in to calibrate
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LAWRENCE FACTOR, INC. X-ZAM LAB SERVICES 4740 NW 157 th Street Miami Lakes, FL 33014 Lawrence Kaplan Phone: 305 430 0550 CHEMICAL Valid To: July 31, 2018 Certificate
More informationGuide No. 2/2009. Design, training and equipment Martin Firlus. Physikalisch Technische Bundesanstalt Braunschweig und Berlin
Guide No. 2/2009 THE ROAD TO a mass laboratory Design, training and equipment Martin Firlus Physikalisch Technische Bundesanstalt Braunschweig und Berlin Imprint Published by: Responsible: Text: Layout:
More informationGas flow calibrations performed at the National Metrology Institute of South Africa (NMISA)
Int. J. Metrol. Qual. Eng. 5, 303 (2014) c EDP Sciences 2014 DOI: 10.1051/ijmqe/2014012 Gas flow calibrations performed at the National Metrology Institute of South Africa (NMISA) D. Jonker and E.P. Tarnow
More informationH&D Fitzgerald Pressure Pyknometry System Mark 5
Setting the standard in density H&D Fitzgerald Pressure Pyknometry System Mark 5 Simple Portable Traceable Remember! Your density meter is only as good as its last calibration! A fundamental calibration
More informationENVIRONMENTAL LABORATORY APPROVAL PROGRAM CERTIFICATION MANUAL
1 of 7 The quality assurance plan as presented in the Quality Manual should assure that constant and consistent test conditions are met and verified and should be tailored to the laboratory s activities.
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26055-2 SOUTH AFRICAN NATIONAL STANDARD Transportable pressure receptacles for compressed, dissolved and liquefied gases Basic design, manufacture, use and maintenance Published by SABS
More informationPredicted Dispense Volume vs. Gravimetric Measurement for the MICROLAB 600. November 2010
Predicted Dispense Volume vs. Gravimetric Measurement for the MICROLAB 600 November 2010 Table of Contents ``Abstract...3 ``Introduction...4 ``Methods & Results...6 ``Data Analysis...9 ``Conclusion...12
More informationHUMOR 20. High Accuracy Humidity Calibrator. Water T, p1 HUMOR 20 V1.0
High Accuracy Humidity Calibrator The role of humidity calibrations that are accurate, reproducible, and documentable is becoming more and more important. ISO quality guidelines and regulations according
More informationUser-Calibration of Mettler AT200 Analytical Balance
UCRL-ID- 132292 User-Calibration of Mettler AT200 Analytical Balance J. Estill July 2,1996 This is an informal report intended primarily for internal or limited external distribution. The opinions and
More informationProcedia Engineering Procedia Engineering 2 (2010)
Available online at www.sciencedirect.com Procedia Engineering Procedia Engineering 2 (2010) 002681 2686 (2009) 000 000 Procedia Engineering www.elsevier.com/locate/procedia 8 th Conference of the International
More informationAccreditation for In-Service Inspection of Pressure Systems/Equipment
RG 2 Edition 5 November 2018 - Draft for consultation Accreditation for In-Service Inspection of Pressure Systems/Equipment RG 2 / Edition: 5 Page 1 of 10 Contents 1. Introduction 2 2. Scope - Inspection
More informationGas Flow Calibration Basics
Basics - May, 2012 Gas Flow Calibration Basics Gas Flow Calibration Basics - May, 2012 Prepared By: Edward Morrell VP of Engineering - Bios Gas & Flow & Calibration Flow is the Quantity of material transported
More informationTESTING BENCHES for watermeters
TESTING BENCHES for watermeters +372 6 480 235 Haljas tee 25, 12012 TALLINN Fax +372 6 480 125 Testing benches are designed by Tepso Ltd. for using in calibration laboratories and also in watermeter production
More informationPressure calibration equipment
Pressure calibration equipment Contents Introduction 2 Oil operated deadweight testers DOS0015 (accuracy 0.015% of reading) 5 DOS0015 Dual Piston (accuracy 0.015% of reading) 6 DOS001 (accuracy 0.01% of
More informationSTANDARD OPERATING PROCEDURE FORCE DIAL FDN 100
Table of Contents 1. Scope 2 2. Objective 2 3. Definitions 2 4. Responsibility 2 5. Procedure 3 6. Precautions 5 7. References 5 8. Appendices 5 9. Revision History 5 Page Original Authorised Copy for:
More informationSeries Ruska Digital Pressure Indicator. GE Sensing & Inspection Technologies. Features
GE Sensing & Inspection Technologies Series 7050 Ruska Digital Pressure Indicator Features Pressure ranges from 0 to 10 inh2o and 0 to 1500 psi (0 to 25 mbar and 0 to 100 bar) Choose from three models:
More informationSpeciality Gases Practice 4. Our quality, your safety. Accredited Test and Calibration Laboratory Speciality Gases Centre in Hörstel.
Speciality Gases Practice 4 Our quality, your safety. Accredited Test and Calibration Laboratory Speciality Gases Centre in Hörstel. Accredited Westfalen quality. Speciality Gases Centre in Hörstel. They
More informationCertified Reference Materials FOR REFRACTOMETERS AND POLARIMETERS
Certified Reference Materials FOR REFRACTOMETERS AND POLARIMETERS Regular verification of laboratory instrumentation is of primary importance in a modern manufacturing facility, not only for reasons of
More informationPROTOCOL FOR COMPRESSED AIR PROFICIENCY TESTING (CAPT) PROGRAM SAMPLE ANALYSIS
Contact Information: PROTOCOL FOR COMPRESSED AIR PROFICIENCY TESTING (CAPT) PROGRAM SAMPLE ANALYSIS No formal enrollment is required to participate in the CAPT program. To get added to the email notifications
More informationNMISA NEW GAS FLOW CALIBRATION FACILITY. Deona Jonker 7 October 2013
NMISA NEW GAS FLOW CALIBRATION FACILITY Deona Jonker 7 October 2013 Introduction Flow the total volume of a fluid that flows past a fixed point in a given time Flow measurements used in industry as a means
More informationEclipse Precision & Analytical Balances
4 Eclipse Precision & Analytical Balances Designed for advanced scientists and researchers, the Eclipse occupies minimal space on the laboratory work bench, yet maintains optimal performance. Its elegant
More informationSeries 7250 Ruska High-Speed Digital Pressure Controller. GE Sensing. Features
Features Pressure ranges from 0 to 5 and 0 to 3000 psi (0 to 400 mbar and 0 to 210 bar) xi and 7250i provide advanced precision of 0.005% of reading provides 0.003% of full scale precision Stability: 0.0075%
More information