Tripod. System. User Instructions. 3M Occupational Health and Environmental Safety. Fall Protection Equipment

Size: px
Start display at page:

Download "Tripod. System. User Instructions. 3M Occupational Health and Environmental Safety. Fall Protection Equipment"

Transcription

1 3M Occupational Health and Environmental Safety Fall Protection Equipment Tripod System User Instructions User Instructions for the 3M TM Tripod System. Important: Keep these User Instructions for reference.

2 GENERAL SAFETY INFORMATION Under Penalty of Law These User Instructions are not to be removed except by the user of this equipment. Current User Instructions must always be available to the user. WARNING 1. Compliant fall protection and emergency rescue systems help prevent serious injury during fall arrest. Users must read and understand the User Instructions provided with the product and be properly trained by their employer prior to use per OSHA 29 CFR and or applicable local standards. Misuse or failure to follow warnings and instructions may result in serious personal injury or death. For proper use, see supervisor, User Instructions, or call Technical Service at Failure to follow all instructions and limitations on the use of the Tripod System may result in serious personal injury or death. 3. Minors, pregnant women and anyone with a history of either back or neck problems should not use this equipment. 4. Not all fall protection components are rated for the same user weight capacity. Only use components rated for the same weight capacity. 5. Before using a personal fall arrest system, employees must be trained in accordance with the requirements of OSHA 29 CFR in the safe use of the system and its components. 6. Personal fall arrest systems, including the Tripod System, must be inspected prior to each use for wear, damage, and other deterioration, and defective components must be immediately removed from service in accordance with the requirements of OSHA 29 CFR and Do not use or install equipment without proper training from a competent person as defined by OSHA 29 CFR (f). 8. The Tripod System is designed for up to two users at one time for emergency rescue applications only. 9. Do not use the 99-M10 Tripod without the safety chain. 10. The 3M 205G 3-Way SRL must not be used in leading edge applications. 11. Only connecting subsystems that limit the fall arrest forces to less than 900 lbf may be used with the Tripod System. 12. Shoulder D-rings of the full body harness are for rescue applications. Always use both shoulder D-rings together simultaneously. 13. Caution must be taken when using the Tripod System near moving machinery, electrical hazards, sharp edges, or abrasive surfaces. Contact with these elements may cause equipment failure, personal injury, or death. 14. Do not expose the Tripod System to chemicals or harsh solutions which may have a harmful effect. Contact 3M Technical Service with any questions. 15. The Tripod System is designed to be used in temperatures ranging from -40ºF to +130ºF (-40 C to +54 C). 16. Store Tripod System in a cool, dry, clean environment, out of direct sunlight when not in use. 17. Any equipment that has been subjected to the forces of arresting a fall or has a deployed load indicator must be immediately removed from service for authorized repairs or disposal. 18. If inspection reveals any defect, inadequate maintenance, or unsafe condition, remove from service for authorized repairs or disposal. 2

3 19. Only 3M, or persons or entities authorized in writing by 3M, shall make repairs or alterations to the equipment. CAUTION 1. At full extension the leg latch located just above the locking pin will engage. Leg latch is only to prevent lower leg from pulling out of upper leg. Locking pin must be used to lock leg into position. 2. Wear proper Personal Protective Equipment when performing Inspection, Cleaning and Maintenance procedures. Safety glasses & gloves are recommended. FALL ARREST SYSTEM COMPONENTS System Components A complete fall arrest system consists of the following components: Anchorage, Body Support, and Connecting Devices. Note: For continuous protection more than one system may be needed. Anchorage An anchorage, as defined by OSHA 29 CFR shall be independent of any anchorage being used to support or suspend platforms and capable of supporting at least 5,000 pounds (22.2 kn) per employee attached, or shall be designed, installed, and used as follows: as part of a complete personal fall arrest system which maintains a safety factor of at least two; and under the supervision of a qualified person. Body Support A body support is the component of a personal fall arrest system that is worn on or around the body. Per OSHA 29 CFR effective January 1, 1998, body belts are not acceptable as part of a personal fall arrest system. Note: The use of a body belt in a positioning device system is acceptable. Full body harnesses must be used for all fall arrest systems. Connecting Devices A connecting device is the link between the body support and anchorage. Connecting devices will vary depending on the application. USE INSTRUCTIONS AND LIMITATIONS Important Before use, the user must read and understand these User Instructions. Keep these User Instructions for reference. Purpose The 3M Tripod System is designed to be used as part of a personal fall arrest, rescue, work positioning, or material handling system. Use Instructions 1. The complete fall protection system must be planned (including all components, calculating fall clearance, and swing fall) before using. 2. Users must have a rescue plan, and the means at hand to implement it, that provides for the prompt rescue of employees in the event of a fall, or assures that employees are able to rescue themselves. 3

4 Use Limitations 1. The Tripod System is for a single user only, and is designed for two users at one time only for emergency rescue applications, with a maximum capacity of 310 pounds (141 kg) including clothing, tools, etc. 2. Only one personal fall arrest system may be in use on the Tripod System. A maximum of two systems (positioning and fall arrest) may be in use at the same time on the 99-M10 Tripod. Only one system may be attached to any one 99-M10 Tripod leg. 3. Only approved 3M components may be used with the Tripod System. ANCHORAGE REQUIREMENTS Anchorages All anchorages on which the Tripod System mounts must meet the requirements of OSHA 29 CFR and ANSI Z OSHA states: Anchorages to which personal fall arrest equipment is attached shall be capable of supporting at least 5,000 pounds (22.2 kn) per employee attached, or shall be designed, installed, and used as part of a complete personal fall arrest system which maintains a safety factor of at least two, under the supervision of a qualifi ed person. ANSI Z states that anchorages in a personal fall arrest system must have a strength capable of sustaining static loads, applied in all permitted directions by the system, of at least: (a) two times the maximum arrest force permitted on the system when certification exists, or (b) 5,000 pounds (22.2 kn) in the absence of certification. The strength in (a) and (b) must be multiplied by the number of personal fall arrest systems attached to the anchorage, when more then one personal fall arrest system is attached to the anchorage. Anchorages used in controlled descent and rescue systems must be capable of supporting loads of 3,100 pounds (13.8 kn) for non-certified anchorages or a 5:1 safety factor for certified anchorages per ANSI Z Anchorages used in work positioning systems must be capable of supporting loads of 3,000 pounds (13.3 kn) for non-certified anchorages or two times the foreseeable force for certified anchorages per ANSI Z Anchorage Connectors Anchorage connectors are components that couple the personal fall arrest system to the anchorage. The anchorage connectors are designed to meet a 5,000 pound tensile load when statically tested in accordance with the requirements of the ANSI Z standard. CONNECTION REQUIREMENTS Compatibility Limitations All connecting subsystems must only be coupled to compatible connectors. OSHA 29 CFR 4

5 prohibits snaphooks from being engaged to certain objects unless two requirements are met: snaphook must be a locking type and must be designed for making such a connection. Designed for means that the manufacturer of the snaphook specifically designed the snaphook to be used to connect to the equipment in question. The following connections must be avoided, because they can result in rollout* when a nonlocking snaphook is used: Direct connection of a snaphook to horizontal lifeline. Two (or more) snaphooks connected to one D-ring. Two snaphooks connected to each other. A snaphook connected back on its integral lanyard. A snaphook connected to a webbing loop or webbing lanyard. Improper dimensions of the D-ring, rebar, or other connection point in relation to the snaphook dimensions that would allow the snaphook keeper to be depressed by a turning motion of the snaphook. *Rollout: A process by which a snaphook or carabiner unintentionally disengages from another connector or object to which it is coupled. (ANSI Z ) Snaphooks and Carabiners Snaphooks and carabiners used in the Tripod System marked with the ANSI Z or ANSI Z standard, are self-locking with a minimal tensile break strength of 5,000 pounds, and a 3,600 pound gate rating. Snaphooks and carabiners marked to the ANSI Z and/or CSA Z standards, are self-locking with a minimal tensile break strength of 5,000 pounds, a minimum gate rating of 220 pound, and a minimum side load gate rating of 350 pounds. SYSTEM COMPONENTS Compatibility Limitations All components and subsystems used with the Tripod System have been tested as part of a complete fall arrest system. Only 3M approved components and subsystems are to be used with the Tripod System. Anchorage Connectors 99-M10 Tripod The aluminum 99-M10 Tripod extends from 57 inches (1.4 m) to 95 inches (2.4 m) for installation over opening with minimum diameter of 39 inches (0.9 m) to a maximum diameter of 61 inches (1.5 m). The cast aluminum head includes two 5 8 inch forged steel eyebolts. The Center Bolt is for ANSI Z and ANSI Z direct connection of fall arrest and rescue subsystems. The Side Bolt is for an OSHA connection for fall arrest and rescue subsystems. A Carabiner and Pulley come with the 99-M10 Tripod. The cast aluminum feet have rubber skid pads, and a safety chain to help prevent the legs from spreading apart. 5

6 Max Height: 95 in (2.4 m) Transport Length: 59 in (1.5 m) Min Height: 57 in (1.4 m) Max: 90 in (2.3 m) Center Bolt Min: 52 in (1.3 m) Side Bolt Maximum Installation Diameter: 61 in (1.5 m) Minimum Installation Diameter: 39 in (0.9 m) M10B-1 Mounting Bracket The cast aluminum M10B-1 Mounting Bracket attaches to any leg of the tripod as an OSHA attachment point. The M10B-1 is universally designed to fit the 3M 205G 3-Way Self Retracting Lanyards with Rescue Capability (205G-50, 205G-75, 205G-100) Pulley The Pulley is constructed of zinc plated steel for up to a 3 16 inch (5 mm) diameter steel cable. The Pulley meets the 5,000 pound tensile breaking strength when statically tested in accordance with the requirements of the ANSI Z standard. Connecting Devices 205G Series 3-Way Self Retracting Lanyards with Rescue Capability The 205G 3-Way Self Retracting Lanyards with Rescue Capability are designed for a single user with a capacity up to 310 pounds (140 kg) including clothing, tools, etc, and comes in 50 feet (205G-50), 75 feet (205G-75) and 100 feet (205G-100) lengths. The 205G 3-Way Self Retracting Lanyards with Rescue Capability have an aluminum alloy housing, and utilize a 3 16 inch (4.8 mm) diameter (7x19) galvanized or stainless steel cable. When dynamically tested in accordance with the requirements of the ANSI Z standard the 205G 3-Way Self Retracting Lanyards with Rescue Capability have a maximum arrest force of 900 pounds (4 kn) and a maximum elongation of 42 inches (1067 mm). 142G Material Winch The 142G Material Winch is capable of raising and lowering loads of 550 poundss and has 65 feet (20 m) of galvanized steel cable. The 142G Material Winch comes complete with hardware pre-attached for mounting onto the 99-M10 Tripod. 6

7 Hardware Snaphooks and carabiners used in the Tripod System marked with the ANSI Z or ANSI Z standard, are self-locking with a minimal tensile break strength of 5,000 pounds and a 3,600 pound gate rating. Snaphooks and carabiners marked to the ANSI Z and/or CSA Z standards, are self-locking with a minimal tensile break strength of 5,000 pounds, a minimum gate rating of 220 pounds, and a minimum side load gate rating of 350 pounds. INSTALLATION Before Each Use Users of personal fall arrest systems must have a rescue plan in place, if the user cannot rescue themselves, as well as the means to carry out the rescue. The user must read and understand these User Instructions, as well as the User Instructions for every component/subsystem of the personal fall arrest system. The entire Tripod System system, and its subsystems, must be inspected prior to each use. All snaphooks and carabiners must be able to self-close and lock. Check the operation of self retracting lanyards by pulling smoothly on the lifeline, then pull sharply on the lifeline to engage the locking mechanism. Cable must be inspected for kinks, broken strands, corrosion, abrasion, or other signs of wear and damage. Swaged terminations should be secure with the thimble tight and not visibly damaged. The crank handle on the 142G Material Winch must turn smoothly and the brake pawl must lock. No load indicators shall be deployed. Damaged and other deteriorated and defective components must be immediately removed from service, in accordance with the requirements of OSHA 29 CFR and The Tripod System must be mounted on stable level surface for each leg, and positioned over an opening that is within the Installation Diameter specified on page 6. Multiple Systems Multiple systems may be attached to the 99-M10 Tripod; however, the 99-M10 Tripod is for a single user only. Warning: The Tripod System is designed for up to two users at one time for emergency rescue applications only. A maximum of two systems may be attached to one 99-M10 Tripod. A maximum of one system may be attached to any one Tripod leg. Step 1. Assemble 99-M10 Tripod Lift 99-M10 Tripod to upright position. Press locking pin above each leg in the head and pull leg 7

8 away from center point until locking pin locks into place. Repeat with remaining legs. Remove locking pin above foot of 99-M10 Tripod leg. Extend leg to desired length and lock in place with locking pin. Repeat with remaining legs. Caution: At full extension the leg latch located just above the locking pin will engage. Leg latch is only to prevent lower leg from pulling out of upper leg. Locking pin must be used to lock leg into position. Remove excess slack in the safety chain by adjusting the position of the twist link. Warning: Do not use the 99-M10 Tripod without the safety chain. Step 2. Attach the M10B-1 Mounting Bracket The M10B-1 Mounting Bracket attaches to the upper leg of the 99-M10 Tripod. Remove two lock nuts and spacers from bolts on the bottom of the M10B-1 Mounting Bracket, and place on upper leg of the 99-M10 Tripod, orientated so the flange of the M10B-1 Mounting Bracket is on the external right. Place bolts through holes on the bottom of the M10B-1 Mounting Bracket, capturing upper leg of the tripod and passing through spacers. Nut must fasten on the left side of the M10B-1 Mounting Bracket and torqued to 30 ft-lb. Step 3. Mount 205G 3-Way SRL Remove locking pin from flange of the mounting bracket. Orient 205G 3-Way SRL so cable is facing the top of the 99-M10 Tripod and the crank is to the right. Mount 205G 3-Way SRL to the right side of the 99-M10 Mounting Bracket flange and slide large washer on the 205G 3-Way SRL into the slot on the flange. The handle of 205G 3-Way SRL should lay in between the M10B-1 Mounting Bracket flange and locking pin plate. Pass locking pin through flange of the M10B-1 Mounting Bracket through hole in the handle of 3-Way SRL and finally through the locking pin plate. Note: The M10B-1 Mounting Bracket is designed to accept any size 3M 205G 3-Way SRL. The locking pin plate on the flange of the M10B-1 Mounting Bracket may need to be adjusted to the hole on the handle of the 3-Way SRL. 3a. Attach 142G Material Winch The 142G Material Winch attaches to the upper leg of the 99-M10 Tripod. Remove two lock nuts and spacers from bolts on the bottom of the 142G Material Winch. Place 142G Material Winch on the upper leg of the 99-M10 Tripod, orientated so the Drum of the 142G Material Winch is towards the top of the 99-M10 Tripod. Place bolts through holes on the bottom of the 142G Material Winch, capturing upper leg of the 99-M10 Tripod and passing through spacers and torqued to 30ft-lb. Step 4. Turn Cable over Pulley Remove Pulley from the head of the 99-M10 Tripod by disconnecting from carabiner. Twist both sides of the Pulley open to allow insertion of cable. Insert the cable of 205G 3-Way SRL or 142G Material Winch and twist both sides to original position. Lock both sides together by attaching back to the carabiner on the head of the 99-M10 Tripod. 8

9 CONNECTION Number of Users The Tripod System is for a single user only, and is designed for two users at one time only for emergency rescue applications, with a maximum capacity of 310 pounds (141 kg) including clothing, tools, etc. Warning: The 205G 3-Way SRL must not be used in leading edge applications. 205G 3-Way SRL for Fall Arrest Applications The 205G 3-Way SRL must only be connected to the dorsal D-ring of the full body harness for a fall arrest application. 205G 3-Way SRL for Rescue Applications The 205G 3-Way SRL may be connected in multiple ways for rescue applications. 205G 3-Way SRL s connected to the dorsal D-ring of the full body harness for fall arrest may be used for rescue. The 205G 3-Way SRL may attach to the Class D front D-ring of the full body harness on the user in need of rescue. See full body harness User Instructions for more information. 205G 3-Way SRL s may attach to the D-ring of the 3M M30-SBA Spreader Bar Assembly for rescue applications. The M30-SBA Spreader Bar Assembly connects to the shoulder D-rings of the full body harness of the user in need of rescue. Warning: Shoulder D-rings of the full body harness are for rescue applications. Always use both shoulder D-rings together simultaneously. 205G 3-Way SRL for Positioning Applications 205G 3-Way SRL s may attach to the D-ring of the 3M 4670 Bosun Chair for positioning applications. Users must secure to the 4670 Bosun Chair using the belt on the chair. A separate personal fall arrest system connected to the dorsal D-ring of the full body harness is required with the use of the 4670 Bosun Chair. The 205G 3-Way SRL may attach to the dorsal D-ring of the full body harness for positioning applications only when there are no other means (stairs or a ladder) to enter or exit the confined space. 205G 3-Way SRL s may attach to the D-ring of the 3M M30-SBA Spreader Bar Assembly for positioning applications. The M30-SBA Spreader Bar Assembly connects to the shoulder D-rings of the full body harness of the user being positioned. A separate personal fall arrest system connected to the dorsal D-ring of the full body harness is required in this application. Warning: Shoulder D-rings are for rescue applications. Always use both shoulder D-rings together simultaneously. 9

10 Self Retracting Lanyards Only Self Retracting Lanyards that limit the maximum arrest force to 900 pounds or less, may be used with the Tripod System. Attach the housing connector of the Self Retracting Lanyard to the eyebolt in the head of the Tripod System. The opposing end is connected to the primary dorsal D-ring of the full body harness. Never attach an additional energy absorbing lanyard, or Self Retracting Lanyard, to lengthen the lifeline. See user instructions supplied with the Self Retracting Lanyard. Warning: Never use combinations of components or subsystems that may affect, or interfere with the safe function of each other Vertical Lifelines with 123, 124, 129 Fall Arresters Only 3M 0221 Vertical Lifelines with 3M 123, 124, 129 Fall Arresters with self trailing capabilities are to be used with the Tripod System. Attach the 0221 Vertical Lifeline to the eyebolt in the head of the Tripod System. Ensure the 0221 Vertical Lifeline hangs freely without twists or knots in the lifeline. See user instructions supplied with the 0221 Vertical Lifeline. With the arrow on the body of the Fall Arrester pointing up, pull the security latch handle up to release the rope chamber. Unscrew thumbscrew knob until the chamber opens. Insert the 0221 Vertical Lifeline rope into the chamber. The arrow on the body of the Fall Arrester must point up towards the head of the 99-M10 Tripod. Position the back half of the chamber around the rope and close. Screw thumbscrew into the receiving nut until the thumbscrew is tight. Secure the chamber by grasping the small knob on the security latch moving it into position in the notch. The Fall Arrester must only be used with a personal energy absorber or energy absorbing lanyard of 36 inches or less. See user instructions supplied with the Fall Arrester. Energy Absorbing Lanyards must be connected with the energy absorbing end of the lanyard connected to the dorsal D-ring of the full body harness. The opposing end of the lanyard is to be connected to the Fall Arrester. See user instructions supplied with the Energy Absorbing Lanyard. INSPECTION Frequency All components of the Tripod System must be inspected prior to each use, and annually by an OSHA defined competent person other than the user. Criteria Warning: If inspection reveals any defect, inadequate maintenance, or unsafe condition, remove from service for authorized repairs or disposal. Warning: Any equipment that has been subjected to the forces of arresting a fall or has a deployed load indicator must be immediately removed from service for authorized repairs or disposal. 10

11 All components and subsystems of the Tripod System must be inspected. See user instructions supplied with component for inspection criteria. All markings must be legible and attached to the product. Each leg must be able to lock into place at the head of the 99-M10 Tripod. Each leg must be straight and able to lock into place when extended. The foot on each leg must pivot freely and have the rubber skid pads attached. The head of the 99-M10 Tripod including the eyebolts and the safety chain must be free of damage. All components must be free of corrosion, chemical attack, alteration, excessive heating or wear. All snaphooks and carabiners must be able to self-close and lock. All hardware must be free of cracks, sharp edges, deformation, corrosion, or any evidence of defect. CLEANING, MAINTENANCE, STORAGE Caution: Wear proper Personal Protective Equipment when performing Inspection, Cleaning and Maintenance procedures. Safety glasses & gloves are recommended. Cleaning The Tripod System can wiped down with a mild detergent and clean water solution, and rinsed with a dampened clean cloth to remove detergent. The hardware can also be wiped down to remove grease, or dirt with a clean dry cloth. Maintenance Any Tripod System components requiring maintenance must be tagged unusable and removed from service. Warning: Only 3M, or persons or entities authorized in writing by 3M, shall make repairs or alterations to the equipment. Cleaning maintenance may be performed by the user. Storage The Tripod System should be stored in a cool, dry place out of direct sunlight when not in use. Do not store in areas where damage from environmental factors such as heat, light, excessive moisture, oil, chemicals and their vapors, or other degrading elements may be present. Do not store damaged equipment or equipment in need of maintenance in the same area as product approved for use. Equipment that has been stored for an extended period must be inspected as defined in these User Instructions prior to use. 11

12 Product Warranty, Limited Remedy, and Limitation of Liability WARRANTY: THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Equipment offered by 3M is warranted against factory defects in workmanship and materials for a period of one year from date of installation or first use by the original owner. LIMITED REMEDY: Upon notice in writing, 3M will repair or replace all defective items at 3M s sole discretion. 3M reserves the right to require that the defective item be returned to its plant for inspection before determining the appropriate course of action. Warranty does not cover equipment damage resulting from wear, abuse, damage in transit, failure to maintain the product or other damage beyond the control of 3M. 3M shall be the sole judge of product condition and warranty options. This warranty applies only to original purchaser and is the only warranty applicable to this product. Please contact 3M technical service department at for assistance. LIMITATION OF LIABILITY: IN NO EVENT WILL 3M BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES INCLUDING, BUT NOT LIMITED TO LOSS OF PROFITS, IN ANY WAY RELATED TO THE PRODUCTS REGARDLESS OF THE LEGAL THEORY ASSERTED. 3M Occupational Health and Environmental Safety Division 3M Center Building 235-2W-70 Saint Paul, MN USA Technical Assistance: in U.S in Canada ISO 9001 FM Please recycle. Printed in USA. 3M M is trademark of 3M Company, used under license in Canada. All rights reserved. IM-0020 ( ) 12

Vertical Lifeline. Ladder Climb. User Instructions. 3M Occupational Health and Environmental Safety. Fall Protection Equipment

Vertical Lifeline. Ladder Climb. User Instructions. 3M Occupational Health and Environmental Safety. Fall Protection Equipment 3M Occupational Health and Environmental Safety Fall Protection Equipment Ladder Climb Vertical Lifeline User Instructions User Instructions for the 3M TM Ladder Climb Vertical Lifeline System. Important:

More information

USER INSTRUCTIONS. Complies with ANSI Z359.1, ANSI Z359.4 standards and OSHA 29 CFR 1910 and 1926 regulations.

USER INSTRUCTIONS. Complies with ANSI Z359.1, ANSI Z359.4 standards and OSHA 29 CFR 1910 and 1926 regulations. FALL PROTECTION USER INSTRUCTIONS TRIPOD SYSTEM Complies with ANSI Z359.1, ANSI Z359.4 standards and OSHA 29 CFR 1910 and 1926 regulations. Models: T100009, T210030B, T210060B, T210100B, T510000B, T510045,

More information

Retractable. Dual Leg. User Instructions. 3M Occupational Health and Environmental Safety. Fall Protection Equipment

Retractable. Dual Leg. User Instructions. 3M Occupational Health and Environmental Safety. Fall Protection Equipment 3M Occupational Health and Environmental Safety Fall Protection Equipment Dual Leg Retractable User Instructions User Instructions for the 3M TM Dual Leg Retractable Important: Keep these User Instructions

More information

OPERATION AND INSTRUCTION MANUAL ROLLER SLING Model: IN106.3FT & IN106.2FT

OPERATION AND INSTRUCTION MANUAL ROLLER SLING Model: IN106.3FT & IN106.2FT OPERATION AND INSTRUCTION MANUAL ROLLER SLING Model: IN106.3FT & IN106.2FT IMPORTANT!!! ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS

More information

OPERATION AND INSTRUCTION MANUAL Beam Trolley Model: BTA012N

OPERATION AND INSTRUCTION MANUAL Beam Trolley Model: BTA012N OPERATION AND INSTRUCTION MANUAL Beam Trolley Model: BTA012N WARNING: ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH.

More information

Rescue Ladder Model: CTB LDR-RSC 18ft (5.48m)

Rescue Ladder Model: CTB LDR-RSC 18ft (5.48m) Rescue Ladder Model: CTB LDR-RSC 18ft (5.48m) IMPORTANT!!! ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH. USERS SHOULD

More information

SUPER SLIDER BEAM ANCHOR ADJUSTABLE FROM Model # BWA030N

SUPER SLIDER BEAM ANCHOR ADJUSTABLE FROM Model # BWA030N SUPER SLIDER BEAM ANCHOR ADJUSTABLE FROM 12-30 Model # BWA030N IMPORTANT!!! ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR

More information

Rescue Ladder Basic Kit Model: LDR-BAS-CTS 18ft (5.48m)

Rescue Ladder Basic Kit Model: LDR-BAS-CTS 18ft (5.48m) Rescue Ladder Basic Kit Model: LDR-BAS-CTS 18ft (5.48m) Patent # US 9,677,333 WARNING: ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS

More information

OPERATION AND INSTRUCTION MANUAL Swivel Anchor Model: SWY100N

OPERATION AND INSTRUCTION MANUAL Swivel Anchor Model: SWY100N OPERATION AND INSTRUCTION MANUAL Swivel Anchor Model: SWY100N IMPORTANT!!! ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH.

More information

OPERATION AND INSTRUCTION MANUAL

OPERATION AND INSTRUCTION MANUAL OPERATION AND INSTRUCTION MANUAL Swivel Anchor Model: SWS100N-316-CTS Patent US # 8,424,638 WARNING: ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT

More information

Rescue Ladder Basic Kit Model: FS-EX243 18ft (5.48m)

Rescue Ladder Basic Kit Model: FS-EX243 18ft (5.48m) Rescue Ladder Basic Kit Model: FS-EX243 18ft (5.48m) IMPORTANT!!! ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH. USERS

More information

OPERATION AND INSTRUCTION MANUAL Flat Roof Anchor Model: FRA250L-10X-CTS

OPERATION AND INSTRUCTION MANUAL Flat Roof Anchor Model: FRA250L-10X-CTS OPERATION AND INSTRUCTION MANUAL Flat Roof Anchor Model: FRA250L-10X-CTS (Patent Pending) WARNING: ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT

More information

Rescue Ladder Model: KT ft (5.48m)

Rescue Ladder Model: KT ft (5.48m) Rescue Ladder Model: KT36164 18ft (5.48m) IMPORTANT!!! ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH. USERS SHOULD BE

More information

OPERATION AND INSTRUCTION MANUAL Swivel Anchor Model: HD26248

OPERATION AND INSTRUCTION MANUAL Swivel Anchor Model: HD26248 OPERATION AND INSTRUCTION MANUAL Swivel Anchor Model: HD26248 IMPORTANT!!! ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH.

More information

VERTICAL / FIXED BEAM CLAMP I-BEAM ANCHOR ADJUSTABLE FROM 4-14 Model # VBC014N

VERTICAL / FIXED BEAM CLAMP I-BEAM ANCHOR ADJUSTABLE FROM 4-14 Model # VBC014N VERTICAL / FIXED BEAM CLAMP I-BEAM ANCHOR ADJUSTABLE FROM 4-14 Model # VBC014N WARNING: ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS

More information

INSTRUCTIONS FOR USE

INSTRUCTIONS FOR USE INSTRUCTIONS FOR USE 7100 Series Lanyards Complies with the current ANSI Z359.1-2007 and all applicable OSHA regulations and requirements. Reliance Industries P.O. Box 2046 Deer Park, TX 77536 Phone :

More information

BANTAM BEAMER ADJUSTABLE FROM Model # BWA014K-BLU-CTS

BANTAM BEAMER ADJUSTABLE FROM Model # BWA014K-BLU-CTS BANTAM BEAMER ADJUSTABLE FROM 3.5-14 Model # BWA014K-BLU-CTS WARNING: ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH.

More information

Permanent Roof Anchors

Permanent Roof Anchors User Instruction Manual Permanent Roof Anchors Part Number: RL-02(A) ISO 9001: 2008 Registered Manual 103-0062 General Safety Information Under Penalty of Law This User Instruction Manual is not to be

More information

BANTAM BEAMER ADJUSTABLE FROM Model # BWA014K

BANTAM BEAMER ADJUSTABLE FROM Model # BWA014K BANTAM BEAMER ADJUSTABLE FROM 3.5-14 Model # BWA014K WARNING: ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH. USERS SHOULD

More information

WARNING! DO NOT THROW AWAY THESE INSTRUCTIONS! READ AND UNDERSTAND BEFORE USING EQUIPMENT!

WARNING! DO NOT THROW AWAY THESE INSTRUCTIONS! READ AND UNDERSTAND BEFORE USING EQUIPMENT! Guardian Fall Protection Kent, WA 800-466-6385 www.guardianfall.com GENERAL SYSTEM SELECTION CRITERIA: Selection of fall protection shall be made by a Competent Person. All fall protection equipment shall

More information

User Instruction Manual Tripod Anchorage Connectors

User Instruction Manual Tripod Anchorage Connectors User Instruction Manual Tripod Anchorage Connectors This manual is intended to meet the Manufacturer's Instructions as required by ANSI Z359.1 and ANSI A10.14, and should be used as part of an employee

More information

User Instructions 1789 Parapet Wall Anchor

User Instructions 1789 Parapet Wall Anchor User Instructions 1789 Parapet Wall Anchor This manual is intended to meet the Manufacturer Instructions as required by ANSI Z359.1 and should be used as part of an employee training program as required

More information

WARNING! DO NOT THROW AWAY THESE INSTRUCTIONS! READ AND UNDERSTAND BEFORE USING EQUIPMENT!

WARNING! DO NOT THROW AWAY THESE INSTRUCTIONS! READ AND UNDERSTAND BEFORE USING EQUIPMENT! Guardian Fall Protection Kent, WA 800-466-6385 www.guardianfall.com GENERAL SYSTEM SELECTION CRITERIA: Selection of fall protection shall be made by a Competent Person. All fall protection equipment shall

More information

INSTRUCTIONS FOR USE

INSTRUCTIONS FOR USE Rebar Chain Assembly INSTRUCTIONS FOR USE 7260XX Rebar Chain Assembly Complies with the current ANSI Z359.1-2007 and all applicable OSHA regulations and requirements. Reliance Industries P.O. Box 2046

More information

A N C H O R T A B S N O R T H W E S T ANCHOR TAB VF. Patented. User Instructions

A N C H O R T A B S N O R T H W E S T   ANCHOR TAB VF. Patented. User Instructions A N C H O R T A B S N O R T H W E S T www.anchortabs.com ANCHOR TAB VF Patented User Instructions National standards, and state, provincial, and federal laws, require installer/user of this product to

More information

User Instruction Manual Fixed Beam Anchor

User Instruction Manual Fixed Beam Anchor User Instruction Manual Fixed Beam Anchor This manual is intended to meet the Manufacturer s Instructions as required by ANSI Z359.1 and ANSI A10.14, and should be used as part of an employee training

More information

OPERATION AND INSTRUCTION MANUAL Swivel Anchor Model: SWY100N

OPERATION AND INSTRUCTION MANUAL Swivel Anchor Model: SWY100N OPERATION AND INSTRUCTION MANUAL Swivel Anchor Model: SWY100N Patent # US 8,424,638 WARNING: ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS

More information

OPERATION AND INSTRUCTION MANUAL

OPERATION AND INSTRUCTION MANUAL OPERATION AND INSTRUCTION MANUAL Dual Extension Swivel Anchor Model: SWD100N-036 WARNING: ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS

More information

User Instructions 1790 Rail Anchor

User Instructions 1790 Rail Anchor User Instructions 1790 Rail Anchor This document is intended to meet the Manufacturer s Instruction requirements as stated by ANSI Z359.1, and should be used as part of an employee training program as

More information

1.2 LIMITATIONS: Consider the following application limitations before using this equipment:

1.2 LIMITATIONS: Consider the following application limitations before using this equipment: User Instruction Manual Standing Seam Roof Anchor This manual is intended to meet the Manufacturer s Instructions, and should be used as part of an employee training program as required by OSHA. Figure

More information

USER INSTRUCTIONS LARGE HOOK & STRAP ANCHORAGE CONNECTOR ! WARNING

USER INSTRUCTIONS LARGE HOOK & STRAP ANCHORAGE CONNECTOR ! WARNING ROSE MODEL NUMBER USER INSTRUCTIONS LARGE HOOK & STRAP ANCHORAGE CONNECTOR! WARNING National standards and state, provincial and federal laws require the user to be trained before using this product. Use

More information

IMPORTANT: Record the product identification information from the ID label in the inspection and maintenance log in section 9.0 of this manual.

IMPORTANT: Record the product identification information from the ID label in the inspection and maintenance log in section 9.0 of this manual. Instructions for the following series products: Vacuum Anchor HLL System (See back page for specific model numbers.) User Instruction Manual Vacuum Anchor Horizontal Lifeline System This manual is intended

More information

1.3 LIMITATIONS: The following application limitations must be recognized and considered before using this product:

1.3 LIMITATIONS: The following application limitations must be recognized and considered before using this product: 3965 Pepin Avenue Red Wing, MN 55066-1837 Toll Free: (800) 328-6146 Phone: (651) 388-8282 Fax: (651) 388-5065 www.protecta.com User Instruction Manual AJ720A Concrete Anchor This manual is intended to

More information

User Instruction Manual Fixed Beam Anchor

User Instruction Manual Fixed Beam Anchor Instructions for the following series products: FIXED BEAM ANCHOR Model Numbers: The Ultimate in Fall Protection 2108406 2108407 2108408 2108409 2108410 2108411 User Instruction Manual Fixed Beam Anchor

More information

DBI SALA Confined Space Rescue Davit System

DBI SALA Confined Space Rescue Davit System Instructions for the following series products: Rescue Davit System (See back page for specific model numbers.) User Instruction Manual For Davit Rescue System This manual should be used as part of an

More information

USER INSTRUCTION MANUAL CONCRETE BOLT ANCHORAGE CONNECTOR

USER INSTRUCTION MANUAL CONCRETE BOLT ANCHORAGE CONNECTOR Instructions for the following series products: Concrete Bolt Connector Models: 2100041, 2100066, 2104560, 2104561, 2104562 USER INSTRUCTION MANUAL CONCRETE BOLT ANCHORAGE CONNECTOR This manual is intended

More information

Figure 1 - Parts Identification. Copyright 2002, DB Industries, Inc.

Figure 1 - Parts Identification. Copyright 2002, DB Industries, Inc. User Instruction Manual Zorbit Energy Absorber Kits for Horizontal Lifeline Systems This manual is provided as the Maunfacturer s Instructions, and should be used as part of an employee training program

More information

User Instruction Manual For Davit Rescue System

User Instruction Manual For Davit Rescue System Instructions for the following series products: Rescue Davit System Model numbers 8004000 and 8302500 User Instruction Manual For Davit Rescue System This manual should be used as part of an employee training

More information

RollGliss Rescue Emergency Descent Device. This manual is intended to be used as part of an employee training program as required by OSHA.

RollGliss Rescue Emergency Descent Device. This manual is intended to be used as part of an employee training program as required by OSHA. User Instruction Manual for: RollGliss Rescue Emergency Descent Device with Auto-Retract (Model Numbers: See Figure 1) User Instruction Manual RollGliss Rescue Emergency Descent Device with auto-retract

More information

Figure 1 - Parts Identification

Figure 1 - Parts Identification Instructions for the following series products: Zorbit Energy Absorber Kits (See back page for specific model numbers.) User Instruction Manual Zorbit Energy Absorber Kits for Horizontal Lifeline Systems

More information

User Instruction Manual. Fixed Beam Anchor

User Instruction Manual. Fixed Beam Anchor Instructions for the following series products: Fixed Beam Anchor (See back page for specific model numbers.) User Instruction Manual Fixed Beam Anchor This manual is intended to meet the Manufacturer

More information

IMPORTANT: If you have questions on the use, care, application, or suitability of this equipment contact DBI/SALA.

IMPORTANT: If you have questions on the use, care, application, or suitability of this equipment contact DBI/SALA. Model Numbers: (See back cover for model numbers) User Instruction Manual Body Belts for Personal Restraint Applications This manual ishould be used as part of an employee training program as required

More information

Rescue ladder System. User Instruction Manual

Rescue ladder System. User Instruction Manual User Instruction Manual for: Rescue Ladder System (Model Numbers: Ladder - 8516294, Hanging Plate Bracket - 8516316) User Instruction Manual Rescue ladder System This manual is intended to meet the Manufacturer

More information

User Manual 1792 Standing Seam Metal Roof Retractable Swivel Anchor

User Manual 1792 Standing Seam Metal Roof Retractable Swivel Anchor 1 User Manual 1792 Standing Seam Metal Roof Retractable Swivel Anchor This manual is intended to meet the Manufacturer Instructions as required by ANSI Z359.1 and should be used as part of an employee

More information

Instructions for the following series products:

Instructions for the following series products: Instructions for the following series products: U-Bolt Roof Anchors (See back page for specific model numbers.) User Instruction Manual U-bolt Roof Anchor This manual is intended to be used as part of

More information

Figure 1 - Cable Grip Horizontal Lifeline Termination ZORBIT ENERGY ABSORBER RELEASE TAB

Figure 1 - Cable Grip Horizontal Lifeline Termination ZORBIT ENERGY ABSORBER RELEASE TAB Instructions for the following series products: Cable Grip (See back pages for specific model numbers.) User Instruction Manual Cable Grip Kit for Horizontal Lifeline Systems This manual is provided as

More information

Instructions for the following series products:

Instructions for the following series products: Instructions for the following series products: EZ-Line Horizontal Lifeline System Model Number 7605060 User Instruction Manual EZ-Line Horizontal Lifeline System This manual is intended to meet the Manufacturer

More information

IMPORTANT: If you have questions on the use, care, or suitability of this equipment for your application, contact DBI/SALA.

IMPORTANT: If you have questions on the use, care, or suitability of this equipment for your application, contact DBI/SALA. User Instruction Manual Precast Concrete Beam Horizontal Lifeline System This manual is provided as the Manufacturer s Instructions, and should be used as part of an employee training program as required

More information

USER INSTRUCTION MANUAL 100% TIE-OFF TALON SELF RETRACTING LIFELINES

USER INSTRUCTION MANUAL 100% TIE-OFF TALON SELF RETRACTING LIFELINES Instructions for the following series products: 100% Tie-off SRL Model Numbers: (see inside back cover) USER INSTRUCTION MANUAL 100% TIE-OFF TALON SELF RETRACTING LIFELINES This manual is intended to meet

More information

Operating instructions. Skyline Beam Clamp

Operating instructions. Skyline Beam Clamp Operating instructions for Skyline Beam Clamp Model # 3093 Reliance Industries, LLC PO Box 140008 Denver, CO 80214 Ph. (800) 488-5751 Ph. (303) 424-8650 Fax (303) 424-8670 User Instructions 3093 Skyline

More information

User Instruction Manual Roof Anchor and / Sayfline Horizontal Lifeline System

User Instruction Manual Roof Anchor and / Sayfline Horizontal Lifeline System Instructions for the following series products: Roof Anchor (See back page for specific model numbers.) User Instruction Manual 2103673 Roof Anchor and 76002001/7600202 Sayfline Horizontal Lifeline System

More information

Important: If you have questions on the use, care, or suitability of this equipment for your application contact Capital Safety.

Important: If you have questions on the use, care, or suitability of this equipment for your application contact Capital Safety. User Instruction Manual for: Saflok Toggle Anchor (Model Number: 2100101) User Instruction Manual Saflok Toggle Anchor This manual is intended to meet the Manufacturer s Instructions as required by ANSI

More information

Figure 1 - Snap Hooks and Carabiners PART NUMBER MANUFACTURER S ID YEAR OF MANUFACTURE PART NUMBER MANUFACTURER S ID YEAR OF MANUFACTURE

Figure 1 - Snap Hooks and Carabiners PART NUMBER MANUFACTURER S ID YEAR OF MANUFACTURE PART NUMBER MANUFACTURER S ID YEAR OF MANUFACTURE Instructions for the following series products: SNAP HOOKS AND CARABINERS (See back page for specific model numbers.) User Instruction Manual Snap Hooks and Carabiners This manual is intended to meet the

More information

Arco Pod. Guardian Fall Protection Kent WA WARNING!

Arco Pod. Guardian Fall Protection Kent WA WARNING! Guardian Fall Protection Kent WA 98032 800.466.6385 www.guardianfall.com GENERAL SYSTEM SELECTION CRITERIA: Selection of fall protection shall be made by a Competent Person. All fall protection equipment

More information

fall arrest. Contact your distributor or Guardian about policies regarding replacement of Guardian components involved in a fall.

fall arrest. Contact your distributor or Guardian about policies regarding replacement of Guardian components involved in a fall. Guardian Fall Protection Kent, WA 800-466-6385 www.guardianfall.com GENERAL SYSTEM SELECTION CRITERIA: Selection of fall protection shall be made by a Competent Person. All fall protection equipment shall

More information

Product Name: Internal Shock Lanyard

Product Name: Internal Shock Lanyard Product Name: Internal Shock Lanyard Part #: 11200; 11201; 11202; 11203; 21215; 01295; 01296; 01297; 01298; 11211; 11212; 11213; 11260; 11261 Instruction Manual Do not throw away these instructions! Read

More information

Product Name: Hold Me Rope Anchor

Product Name: Hold Me Rope Anchor Product Name: Hold Me Rope Anchor Part #: 01300 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction 1 Applicable Safety

More information

Saflok Concrete Wedge Anchor

Saflok Concrete Wedge Anchor User Instruction Manual for: Saflok Concrete Wedge Anchor (Model Numbers: 2100085, 2100085C) User Instruction Manual Saflok Concrete Wedge Anchor This manual is intended to meet the Manufacturer s Instructions

More information

Product Name: Non-Shock Lanyard

Product Name: Non-Shock Lanyard Product Name: Non-Shock Lanyard Part #: 01121, 01122; 01280, 01250, 01255, 01260, 01265, 01251, 01261, 01265, 01270, 01271 Instruction Manual Do not throw away these instructions! Read and understand these

More information

Product Name: Edge Series Web SRL

Product Name: Edge Series Web SRL Product Name: Edge Series Web SRL Part #: 10900; 10901, 10909, 20900 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction

More information

Reliance Industries, LLC Operating instructions for the / Bolt-on D-Ring Anchorage. Model # 3071

Reliance Industries, LLC Operating instructions for the / Bolt-on D-Ring Anchorage. Model # 3071 Reliance Industries, LLC Operating instructions for the 3071-1 / 3071-2 Bolt-on D-Ring Anchorage Model # 3071 Reliance Industries, LLC PO Box 140008 Denver, CO 80214 Ph. (800) 488-5751 Ph. (303) 424-8650

More information

SELF-RETRACTING LIFELINES - INSTRUCTION MANUAL

SELF-RETRACTING LIFELINES - INSTRUCTION MANUAL SRD Instruction Manual SELF-RETRACTING S - INSTRUCTION MANUAL THESE INSTUCTIONS APPLY TO THE FOLLOWING MODEL(S): C7000 C7001 C7002 C7003 C7004 C7005 C7020 C7021 C7100 C7201 C7202 C8000 C8001 MaltaDynamics.com,

More information

Product Name: Concrete Anchor Strap

Product Name: Concrete Anchor Strap Product Name: Concrete Anchor Strap Part #: 10705; 10710; 10715 ; 10717; 10720 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Table

More information

Product Name: Angel Anchor

Product Name: Angel Anchor Product Name: Angel Anchor Part #: 00260 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction 1 Applicable Safety Standards

More information

Self Retracting Device User Instruction Manual

Self Retracting Device User Instruction Manual 6.3 INSPECTION AND MAINTENANCE LOG CONTINUED: Model: Serial #: Date of Mfg: Class: SRL SRL-R SRL-LE INSPECTION DATE INSPECTION ITEMS NOTED CORRECTIVE ACTION MAINTENANCE PERFORMED Web Devices Fall Arrest

More information

GEMTOR. ... when your life is on the line OWNER'S MANUAL. FLW Series Self-Retracting Lanyard/Fall Limiter

GEMTOR. ... when your life is on the line OWNER'S MANUAL. FLW Series Self-Retracting Lanyard/Fall Limiter GEMTOR TM... when your life is on the line OWNER'S MANUAL FLW Series Self-Retracting Lanyard/Fall Limiter Installation, Operating, Inspection and Maintenance Instructions Warning You must read and fully

More information

INSTRUCTIONS FOR USE

INSTRUCTIONS FOR USE INSTRUCTIONS FOR USE 88004X Series D-Ring Extender 5000 lb Rated Connector Complies with ANSI Z359.1-1998, ANSI 10.14 and OSHA 1926 regulations and requirements. Reliance Industries P.O. Box 2046 Deer

More information

ROOF ANCHOR / D-RING ANCHOR PLATE

ROOF ANCHOR / D-RING ANCHOR PLATE RIGGERS SAFETY Riggers Safety LLC. 267 Winfield Cr. Corona, CA 92880. 951 371 8586. www.riggerssafety.com Use and Safety Manual ROOF ANCHOR / D-RING ANCHOR PLATE Table of Contents WARNINGS 3 Definitions

More information

Product Name: Rope Grab

Product Name: Rope Grab Product Name: Rope Grab Part #: 01500; 01503; 01505; 01506; 01507; 01511 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction

More information

USER S INSTRUCTION MANUAL FOR THE INSTALLATION, OPERATION & MAINTENANCE OF THE GUARDIAN TEMPORARY HORIZONTAL LIFELINE SYSTEM

USER S INSTRUCTION MANUAL FOR THE INSTALLATION, OPERATION & MAINTENANCE OF THE GUARDIAN TEMPORARY HORIZONTAL LIFELINE SYSTEM USER S INSTRUCTION MANUAL FOR THE INSTALLATION, OPERATION & MAINTENANCE OF THE GUARDIAN 04630 TEMPORARY HORIZONTAL LIFELINE SYSTEM 1 WARNING This is a design compatible component for a comprehensive Guardian

More information

Product Name: Edge Angel SRL

Product Name: Edge Angel SRL Product Name: Edge Angel SRL Part #: 10920; 10922; 10925 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction 1 Applicable

More information

Product Name: Bull Ring Anchor

Product Name: Bull Ring Anchor Product Name: Bull Ring Anchor Part #: 00484 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction 1 Applicable Safety Standards

More information

7 Web Retractable Series

7 Web Retractable Series Web Retractable Series O18-5000 Web Single Leg Retractable This unit is lightweight with a durable translucent housing that not only looks unique, but also makes for easy viewing of internal components

More information

Fall Protection Checklist. Guardrail System

Fall Protection Checklist. Guardrail System Fall Protection Checklist Location/Department: Date of Inspection: Inspectors: Corrective Actions: Work order/memos were issued: Yes No Date issued: In accordance with the MIOSHA and OSHA standards the

More information

WrapBax 2 Lanyards With Integral Energy Absorbers

WrapBax 2 Lanyards With Integral Energy Absorbers Instructions for the following series products: WrapBax 2 Lanyards (See back page for specific model numbers.) User Instruction Manual WrapBax 2 Lanyards With Integral Energy Absorbers This manual is intended

More information

Metal/Wood Swiveling Roof Anchor

Metal/Wood Swiveling Roof Anchor User Instruction Manual Swiveling Roof Anchor Model Number: 2190011, 2190013 User Instruction Manual Metal/Wood Swiveling Roof Anchor This manual is intended to meet the Manufacturer s Instructions as

More information

Part #: 42000; 42001; 42002; 42003; 42004; 42005; 42006; 42008

Part #: 42000; 42001; 42002; 42003; 42004; 42005; 42006; 42008 Product Name: Velocity SRL Part #: 42000; 42001; 42002; 42003; 42004; 42005; 42006; 42008 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment!

More information

Serial Number: Lot Number: Purchase Date: General Factors Accepted / Rejected Supportive Details or Comments. Accepted Rejected.

Serial Number: Lot Number: Purchase Date: General Factors Accepted / Rejected Supportive Details or Comments. Accepted Rejected. Full Body Harness Harness Model: General Factors / Supportive Details or Comments 1.) Hardware: (includes D-rings, buckles, keepers, and back pads) Inspect for damage, distortion, sharp edges, burrs, cracks

More information

Product Name: 2-Way Standing Seam Roof Clamp

Product Name: 2-Way Standing Seam Roof Clamp Product Name: 2-Way Standing Seam Roof Clamp Part #: 10600 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction 1 Applicable

More information

Operating instructions. Bolt-on Bar Joist Anchorage

Operating instructions. Bolt-on Bar Joist Anchorage Reliance Industries, LLC Operating instructions for the Bolt-on Bar Joist Anchorage Model # 3072 Reliance Industries, LLC PO Box 140008 Denver, CO 80214 Ph. (800) 488-5751 Ph. (303) 424-8650 Fax (303)

More information

Visit for the latest user instruction manual based upon date of manufacture.

Visit   for the latest user instruction manual based upon date of manufacture. Visit www.maltadynamics.com for the latest user instruction manual based upon date of manufacture. Razorback Rescue System INSTRUCTION MANUAL These instructions apply to the following model(s): R0003 -

More information

Product Name: Beamer Instruction Manual. Part #: 00110

Product Name: Beamer Instruction Manual. Part #: 00110 Product Name: Beamer 12-1 Part #: 00110 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Guardian Fall Protection 6305 S. 231st St.,

More information

PHOENIX, AZ USA

PHOENIX, AZ USA 1-800-850-5914 PHOENIX, AZ USA Approved for LEADING EDGE and foot level drops. 3rd party certified by an ISO 17025 accredited test laboratory. Lengths up to 210. USER INSTRUCTION MANUAL DESCRIPTION: SAFETY

More information

rooftop anchor Standing Seam Metal Roofs

rooftop anchor Standing Seam Metal Roofs The Ultimate in Fall Protection INSTRUCTION MANUAL ANSI Z359.1 OSHA This manual is intended to meet the Manufacturer s Instructions as required by ANSI Z359.1 and should be used as part of an employee

More information

RIGGERS SAFETY SAFETY IS IN THE DETAILS FULL LINE CATALOG

RIGGERS SAFETY SAFETY IS IN THE DETAILS FULL LINE CATALOG RIGGERS SAFETY SAFETY IS IN THE DETAILS FULL LINE CATALOG Riggers Safety is a California-based manufacturer of Personal Fall Arrest Systems (PFAS) and Fall Prevention Products. Our automated manufacturing

More information

User Installation and Instruction Manual for Connect Safe Portable Truss Anchor

User Installation and Instruction Manual for Connect Safe Portable Truss Anchor 24400 Sperry Drive Cleveland, OH 44145 1-800-504-4016 info@fallprotect.com www.fallprotect.com User Installation and Instruction Manual for Connect Safe Portable Truss Anchor This manual shall be used

More information

User Instruction Manual Metal/Wood Swiveling Roof Anchor

User Instruction Manual Metal/Wood Swiveling Roof Anchor User Instruction Manual Metal/Wood Swiveling Roof Anchor This manual is provided as the Manufacturer s Instructions, and should be used as part of an employee training program as required by OSHA. DESCRIPTION

More information

Product Name: 2-Way Standing Seam Roof Clamp. Instruction Manual. Part #: 10600

Product Name: 2-Way Standing Seam Roof Clamp. Instruction Manual. Part #: 10600 Product Name: 2-Way Standing Seam Roof Clamp Part #: 10600 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Table of Contents Introduction

More information

Product Name: O-Torque Beamer

Product Name: O-Torque Beamer Product Name: O-Torque Beamer Part #: 00141 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction 1 Applicable Safety Standards

More information

D-Ring Anchorage Connector

D-Ring Anchorage Connector The Ultimate in Fall Protection User Instruction Manual D-Ring Models: 2101630, 2101632, 2101633, 2101634, 2101636, 2101638, 2109870 This manual is intended to meet the Manufacturer s Instructions as required

More information

sealed self retracting lifeline

sealed self retracting lifeline Supplemental Instruction to: Sealed Self Retracting Lifeline (See back page for specific model numbers.) Supplemental Instruction User Instruction Manual sealed self retracting lifeline Use this Supplemental

More information

Instructions for the following series products: Sealed SRL (See back page for specific model numbers.)

Instructions for the following series products: Sealed SRL (See back page for specific model numbers.) Instructions for the following series products: Sealed SRL (See back page for specific model numbers.) User Instruction Manual Sealed Self Retracting Lifelines This manual is intended to meet the Manufacturer

More information

This manual is intended to meet the Manufacturer s Instructions and should be used as part of an employee training program.

This manual is intended to meet the Manufacturer s Instructions and should be used as part of an employee training program. Instructions for the following series products: User Instruction Manual Anchorage D-Bolt Anchorage D-Bolt Model Numbers: AN112A, 9504766 This manual is intended to meet the Manufacturer s Instructions

More information

RIGGERS SAFETY SAFETY IS IN THE DETAILS FULL LINE CATALOG

RIGGERS SAFETY SAFETY IS IN THE DETAILS FULL LINE CATALOG RIGGERS SAFETY SAFETY IS IN THE DETAILS FULL LINE CATALOG Riggers Safety is a California-based manufacturer of Personal Fall Arrest Systems (PFAS) and Fall Prevention Products. Our automated manufacturing

More information

Instructions for The Rose Crossover Style Full Body Harness For Women

Instructions for The Rose Crossover Style Full Body Harness For Women P.O. Box 3026 Sherwood Park Alberta T8H 2T1 Phone: (780) 464-7139 Fax: (780) 464-7652 e-mail: inquiries@ safetydirect.ca Web site: www.safetydirect.ca Instructions for The Rose Crossover Style Full Body

More information

DO NOT THROW AWAY THESE INSTRUCTIONS! READ AND UNDERSTAND BEFORE USING EQUIPMENT!

DO NOT THROW AWAY THESE INSTRUCTIONS! READ AND UNDERSTAND BEFORE USING EQUIPMENT! Guardian C-Slab Grabber Part #: 15500 USER S MANUAL DO NOT THROW AWAY THESE INSTRUCTIONS! READ AND UNDERSTAND BEFORE USING EQUIPMENT! TABLE OF CONTENTS: INTRODUCTION... Page 2 USER INFORMATION... Page

More information

1 SafeClaw Anchorage Connectors

1 SafeClaw Anchorage Connectors Operations and Instruction Manual Model #4077 Portable Concrete Anchorage Connector ANSI Z359.1 10,000 lbs / 44kn OHSA 1910.66 & 1926.502 Effective: 01/2012 Expires: 01/2022 IM-0050 REVA 1 SafeClaw Anchorage

More information

Part #: 15158; 15159; 15188; 61027; 61029; 61140; 61141

Part #: 15158; 15159; 15188; 61027; 61029; 61140; 61141 Product Name: Guardrail Receivers Part #: 15158; 15159; 15188; 61027; 61029; 61140; 61141 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment!

More information

11.4 FALL-ARREST SYSTEM AND EQUIPMENT CHECKLIST (Must answer yes to all applicable questions)

11.4 FALL-ARREST SYSTEM AND EQUIPMENT CHECKLIST (Must answer yes to all applicable questions) 11.4 FALL-ARREST SYSTEM AND EQUIPMENT CHECKLIST (Must answer yes to all applicable questions) This checklist shall be completed either by the Competent Person or a person trained and designated by the

More information

3/4 SafeClaw Anchorage Connectors

3/4 SafeClaw Anchorage Connectors Operations and Instruction Manual Model #4075 Portable Concrete Anchorage Connector ANSI Z359.1-07 5,000 lbs / 22kn OHSA 1910.66 & 1926.502 Effective: 01/2012 Expires: 01/2022 IM-0049 REVA 3/4 SafeClaw

More information