G SERIES METRIC MACHINE SCREW ACTUATOR

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "G SERIES METRIC MACHINE SCREW ACTUATOR"

Transcription

1 G SERIES METRIC MACHINE SCREW ACTUATOR kn to 0kN Duff-Norton metric actuators are manufactured to the same high quality standards and include all the same features and benefits as the standard line of actuators while incorporating the following features. Load Capacities in Tonnes Mounting dimensions in millimeters screw diameters with trapezoidal threads (machine screw actuators) shaft and keyway sizes per ISO recommended standards All metric fasteners on machine screw units bolt centers Other sizes and models available, contact Duff-Norton for more information 78

2 Model Numbering System 1/2 to Tons FL - GKM R Model Prefix Series & Capacity No. Travel R - Reducer F - C-face or B-face Adapter H - Hand Wheel L - Limit Switch E - Encoder J - Rotary Counter G - Base Model Screw End & Configuration T - Threaded End C - M - P - Plain End K - Keyed Screw CC - Double Clevis D - Inverted Rotating U - Upright Rotating Series: kn - 0kN Machine Screw (90xx) Special MS (0xx) 5kN - kn Machine Screw (26, 01, 9002) Special MS (36, 31, 002) Capacities: kn - 0kN: Upright model suffixes end with the capacity number. Inverted model suffixes lower the capacity number by one digit. Rotating model suffixes raise the capacity number by one digit. 5kN -kn: Upright model suffixes lower the capacity number by one digit. Rotating model suffixes raise the capacity number by one digit. 1 mm increment travels are always represented using the exact travel amount. Serialized digits in this position may also be used for other models containing special features Model Suffix B - Boot L - Single End Worm Ext. Left R - Single End Worm Ext. Right 1 - Optional Ratio #1 2 - Optional Ratio #2 X - Supplied without cover pipe, but with guide bushing. 79

3 Performance Specifications Threaded s and s Guide Bushings Reduces lateral movements Machine Screw Actuator Product Specifications Capacity (kn) Lifting Screw Diameter (mm) Lead (mm) Std. 5:1 5:1 6:1 6:1 8:1 8:1 8:1 2/3:1 2/3:1 Worm Gear Ratios Optional No. 1 :1 :1 :1 :1 :1 :1 32:1 32:1 Optional No. 2 12:1 12:1 Std Travel per Worm Turn (mm) Optional No Optional No Std Worm Torque at No Load (N-m) Optional No Optional No Std Maximum Input Power (kw) Optional No Optional No Std Worm Torque at Full Load (N-m) Optional No Optional No Std Efficiency Rating (%) Optional No Optional No Weight with mm Raise (kg) Wt per Additional mm Raise (kg) Key Torque (N-m) Max Worm Speed at Full Load (rpm) Max Load at Max Power and 14 rpm (kn) Type Std Optional No Optional No Std Optional No Optional No *For loads from % to 0% of actuator capacity, torque requirements are approximately proportional to the load. Raises, measured in increments of mm, are available up to 6.1 meters, depending on lifting screw diameter and available bar stock length. Note: Contact customer service for motorized performance.

4 5 kn Capacity 1 R.H. Ext. Clockwise Rotation Raises Load 26 ± h N9 x 1.8 x 18L Mx1.5-6g Trx3 =Stroke Closed Ht R29 Upright: G26 26 ±0.08 Top View: G26 mm Diameter x 3mm Lead Lifting Screw 26.7 Mx1.5-6g =Stroke Inverted: G26 Trx3 Closed Ht. 45 B.C. 4 Holes Ø9 on 42 Circle 26 ±0.08 Trx3 65 G Upright Inverted Travel Upright Rotating: GU Upright 60 Inverted G Travel + 44 Inverted Rotating: GD

5 kn Capacity 1 ±0.08 R.H. Ext. Clockwise Rotation Raises Load 14 h Trx5 M12x1.75-6g R36 5 x 3 x L 88 1 Closed Ht. Upright: G01 = Stroke 127 Top View: G01 ±0.08 mm O.D. 5mm Lead Lifting Screws Trx5 M12x1.75-6g 1 Upright 45 Inverted =Stroke Closed Ht. Ø11 Ø Ø55 G01-6 Ø 4 Holes 11 on 57 Circle 12 k Inverted: G00 Upright Trx5 Travel ± Upright 65 Inverted Upright Rotating: GU02 Ø12 Ø G01-11 Inverted 6 Travel + 44 Inverted Rotating: GD02 82

6 kn Capacity Ø 13.5 Right Hand Extension- Clockwise rotation extends screw. Ø h x5 key Mx2.5 Ø Stroke Upright: G9002 Top View: G9002 mm O.D. 6mm Lead Lifting Screws 48.3 Mx Upright 55 Inverted Stroke Ø 13.5 Ø 0 Ø Ø Ø h9 4 Holes Ø 13.5 on 65 Circle Inverted: G9001 Ø 15 G Ø89 Stroke Upright Inverted Upright Rotating: GU9003 Ø. Ø 38.1 Ø h G Stroke + 74 Inverted Rotating: GD

7 kn Capacity Ø 18 Right Hand Extension- Clockwise rotation Extends screw Ø19 h8 6x6 Key Mx3 60 Ø shim Upright: G9005 Stroke - 2 Top View: G mm O.D. 9mm Lead Lifting Screws Mx3 Ø Upright 65 Inverted Stroke Ø18 Ø85 Ø Ø Ø h9 4 Holes Ø 18 on 85 Circle Inverted: G Ø114.3 Ø55 G Stroke Upright 90 Inverted Upright Rotating: GU9006 Ø 60 Ø.8 Ø h G Stroke + 1 Inverted Rotating: GD

8 0 kn Capacity Ø22 60 h8 M36 x mm Shim Upright: G90 Stroke + 4 Top View: G90 52mm O.D. x 12mm Lead Lifting Screws M36 x 4 0 Upright Inverted Stroke Ø22 Ø 1 Inverted: G9009 Ø1 42 Ø65 Øh9 4 Holes Ø22 on 1 Circle 76.2 Ø G90-6 Stroke + 0 Ø Ø22 5 Upright 1 Inverted Upright Rotating: GU9011 Ø65 Ø h G Stroke + 1 Inverted Rotating: GD

9 1 kn Capacity CCW ROTATION EXTENDS LIFTING SCREW 7x8x32 KEY (TYP) 46 MX3 THREAD 70 Øh L.H. EXT. R.H. EXT R typ Ø 26 HOLE Ø43 SPOTFACE (4 PLACES) 8 1 Upright: G9015 STROKE Top View: G mm O.D. x 12mm Lead Lifting Screws Ø26 HOLE (4 PLACES ON Ø115 B.C.) STROKE 1 8 Ø Ø 70 8 UPRIGHT 8 INVERTED BASE OF ACTUATOR Ø Inverted: G Ø22 HOLE (4 PLACES ON 1 B.C.) G Ø Ø75 3 UPRIGHT 1 INVERTED BASE OF ACTUATOR Ø90 Ø STROKE Upright Rotating: GU90 Ø CLEVIS END (OPTIONAL) G90-11 G STROKE + 2 Inverted Rotating: GD

10 0 kn Capacity CCW ROTATION EXTENDS LIFTING SCREW 8x7x KEY (TYP) 48 M48X5 THREAD 85 Ø28 h8 TYP Ø L.H. EXT. R.H EXT R29 TYP Ø26 HOLE (4 PLACES) STROKE -1 Upright: G90 Top View: G90 65mm O.D. x 12mm Lead Lifting Screws Ø89 Ø26 HOLE (4 PLACES ON Ø1 B.C.) Ø Ø UPRIGHT 95 INVERTED G90-6 Ø BASE OF ACTUATOR Ø45 65 STROKE Inverted: G9019 Ø90 Ø STROKE + 0 Ø26 HOLE (4 PLACES ON 1 B.C.) Upright Rotating: GU9021 Ø Ø75 3 UPRIGHT 1 INVERTED BASE OF ACTUATOR Ø89 Ø45 G STROKE + 0 Inverted Rotating: GD

ASM. Asynchronous Spindle Motors. SEM Limited Faraday Way Orpington, Kent BR5 3QT United Kingdom

ASM. Asynchronous Spindle Motors. SEM Limited Faraday Way Orpington, Kent BR5 3QT United Kingdom NE ASM Asynchronous Spindle Motors SEM Limited Faraday Way Orpington, Kent BR 3QT United Kingdom Tel: +44 ()189 8847 Fax: +44 ()189 884884 Email: sales@sem.co.uk Web: www.sem.co.uk Version 4 August 2 Asynchronous

More information

Cost effective. Smooth. Reliable. LOG Internal Hole Gripper

Cost effective. Smooth. Reliable. LOG Internal Hole Gripper LOG Cost effective. Smooth. Reliable. LOG Internal Hole Gripper Light gripper made of very resistant polyamide with closed diaphragm system Field of Application Particularly suited to highly dynamic applications

More information

Directional Controls

Directional Controls Vickers Directional Controls Directional Control Valves DG3V-3-*-60 Hydraulic Operated DG17V-3-*-60 Lever Operated DG18V-3-*-60 Air Operated DG20V-3-*-60 Cam Operated DG21V-3-*-60 Plunger Operated CETOP

More information

E Series Piston Pumps Variable Displacement Series for Mobile Applications Technical Catalog PVE012 PVE19 PVE21

E Series Piston Pumps Variable Displacement Series for Mobile Applications Technical Catalog PVE012 PVE19 PVE21 E Series Piston Pumps Variable Displacement Series for Mobile Applications Technical Catalog PVE012 PVE19 PVE21 Table of Contents Introduction......................................................................................................

More information

VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES 10

VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES 10 / ED VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES OPERATING PRINCIPLE The VPPL are variable displacement axial-piston pumps with variable swash plate, suitable for applications

More information

Mate ULTRA IMT Multi Tool Assembly Tooling Installation Instructions

Mate ULTRA IMT Multi Tool Assembly Tooling Installation Instructions Installation and assembly instructions for Mate ULTRA IMT Multi Tool Punch and Die Holder assemblies. 8-Station is shown. 3-Station uses the same procedure. Lubrication Port Keep top lubricated (for machine

More information

Fixed Displacement Motor A4FM

Fixed Displacement Motor A4FM Industrial Hydraulics Electric Drives and Controls Linear Motion and ssembly echnologies Pneumatics Service utomation Mobile Hydraulics Fixed Displacement Motor 4FM RE 91 12/4. replaces: 3.95 and RE 91

More information

Installation, Operation and Maintenance Manual for Back Pressure Regulator

Installation, Operation and Maintenance Manual for Back Pressure Regulator Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN

More information

Digital relief valves D-CG

Digital relief valves D-CG Digital relief valves D-G unctional Symbols D-G- Specifications Size Maximum working pressure Rated flow Maximum flow Maximum adjustable pressure Ma Minimum control pressure Hysteresis Repeatability emperature

More information

Superwinch DC Electric & Hydraulic Winches Each winch data sheet comprises of two pages. HUSKY PRO 12v & 24v

Superwinch DC Electric & Hydraulic Winches Each winch data sheet comprises of two pages. HUSKY PRO 12v & 24v TM TM Superwinch DC Electric & Winches Each winch data sheet comprises of two pages 12v & 24v DC Electric Winches HUSKY PRO 12v & 24v 2.5 Tonne Winches - 2.5 Tonne to 6 Tonne H9W 2.5 Tonne H8 & H10 3.56

More information

1000/13.02 KOBSERT. Thread inserts for metals

1000/13.02 KOBSERT. Thread inserts for metals 1000/13.02 KOBSERT Thread inserts for metals Contents KOBSERT Thread inserts for metals Page The principle 3 The benefits 3 Product types 3 Applications in the Automotive and General industry 4 Technical

More information

Rp [ ] Sv min. [ ] C215QP-B 15 1/ C215QP-D 15 1/ C220QP-F 20 3/ [ ]

Rp [ ] Sv min. [ ] C215QP-B 15 1/ C215QP-D 15 1/ C220QP-F 20 3/ [ ] Technical data sheet C2..QP-.. For closed cold and warm water systems For modulating control of airhandling and heating systems on the water side Snap-assembly of the actuator overview DN [ ] Vnom [ l/h]

More information

Vickers. Flow Controls. Flow Controls FN, F(C)G, FRG. Released 6/94

Vickers. Flow Controls. Flow Controls FN, F(C)G, FRG. Released 6/94 Vickers Flow Controls Flow Controls FN, F(C)G, FRG Released 6/94 685 Table of Contents FN03/06/10 Model Series Application Data...............................................................................

More information

VSL MINING & TUNNELING SYSTEMS VSL. mining and tunneling

VSL MINING & TUNNELING SYSTEMS VSL. mining and tunneling VSL MINING & TUNNELING SYSTEMS VSL mining and tunneling VSL Mining & Tunneling Bolt systems VSL offers three type of bolting system for the mining & Tunnelling industry VSL-S Solid Threaded bolts. Continuous

More information

P2* MODULAR SUBPLATES FOR ISO (CETOP 03) VALVES

P2* MODULAR SUBPLATES FOR ISO (CETOP 03) VALVES 52 000/110 ED This series of modular subplates has been designed to make hydraulic circuits and can be used directly on power packs or on any other section of the machine. The subplates are assembled by

More information

GRUNDFOS alldos product information. Vaccuperm 111 / 113. Vacuum gas dosing systems for chlorine gas, ammonia, sulphur dioxide and carbon dioxide

GRUNDFOS alldos product information. Vaccuperm 111 / 113. Vacuum gas dosing systems for chlorine gas, ammonia, sulphur dioxide and carbon dioxide GRUNDFOS alldos product information Vacuum gas dosing systems for chlorine gas, ammonia, sulphur dioxide and carbon dioxide Construction and function Modular system Vacuum regulator for direct mounting

More information

Air Operated Hydraulic Pumping Systems to 50,000 psi

Air Operated Hydraulic Pumping Systems to 50,000 psi High Pressure Equipment Air Operated Hydraulic Pumping Systems to 50,000 psi PS-10: 10,000 psi PS-20: 20,000 psi PS-30: 30,000 psi PS-40: 40,000 psi PS-50: 50,000 psi PS-90: 90,000 psi High Pressure air

More information

3 & 4-Way Mixing & Diverting Valves

3 & 4-Way Mixing & Diverting Valves Applications: 3-Way Valve The ESBE VRG series of 3 & 4-way valves are designed to mix water to the appropriate temperature to meet the zone or system requirements within heating and cooling systems. The

More information

G R I P P E R S English edition 10/2012

G R I P P E R S English edition 10/2012 GRIPPERS English edition 10/2012 76 GRIPPERS CONTENTS PRECISION PARALLEL GRIPPERS 78-93 PRECISION PARALLEL MINI GRIPPERS 96 109 UNIVERSAL PARALLEL GRIPPERS 112 121 LONG-STROKE GRIPPERS 122 131 77 UNIVERSAL

More information

DIRECT DRIVE DIXIE DOUBLE SEAMER Model 25D

DIRECT DRIVE DIXIE DOUBLE SEAMER Model 25D OPERATOR'S MANUAL DIRECT DRIVE DIXIE DOUBLE SEAMER Model 25D LUBRICATE DAILY: A. Gears inside gear housing at chuck shaft (1) Oil B. Seam rolls and cam rolls (4) - Oil C. Seam roll levers through gear

More information

Reproduction. Not for 27" & 29" TWO STAGE INTERMEDIATE SNOWTHROWERS Parts Manual for M1227E M1227EX M1529E

Reproduction. Not for 27 & 29 TWO STAGE INTERMEDIATE SNOWTHROWERS Parts Manual for M1227E M1227EX M1529E Parts Manual for 27" & 29" TWO STAGE INTERMEDIATE SNOWTHROWERS 2011 Model No. Description 1696001 M1227E 1696002 M1227EX 1696003 M1529E Briggs & Stratton Yard Power Products Group 535 Macon Road McDonough,

More information

Air Grinders - Angle

Air Grinders - Angle Screwdriving technology Automation Air motors Air tools Air Grinders - Angle without gearing /// with gearing with vane/turbine motor For grinding wheels Ø 100, 115, 125, 150, 180, 230 mm Power output:

More information

Position switches FP series

Position switches FP series A Position switches FP series Selection diagram 0 08 8 9 0 0 0 Ø 8 mm Ø, mm external rubber stainless steel stainless steel fiber glass rod gasket sphere sphere adjustable lever safety adjustable lever

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL INFORMATION Models No. TD0101, TD0101F Description Impact Driver L PRODUCT P 1/ 14 CONCEPT AND MAIN APPLICATIONS Models TD0101 and TD0101F are cost-competitive 100N.m-class impact driver developed

More information

User Guide for. UTR Turbo Air Lappers Pneumatic Air Grinders & Lappers UTR-30, UTR-70, UR , ,

User Guide for. UTR Turbo Air Lappers Pneumatic Air Grinders & Lappers UTR-30, UTR-70, UR , , User Guide for UTR Turbo Air Lappers Pneumatic Air Grinders & Lappers UTR-30, UTR-70, UR-120 8502250, 8502245, 8502251 We thank you for choosing our products. This guide provides information on general

More information

Over-center valves type LHT with oscillation damping, zero leakage

Over-center valves type LHT with oscillation damping, zero leakage Over-center valves type LHT with oscillation damping, zero leakage Flow rate Q max = 250 lpm Operation pressure p max = 450 bar See also: o Over-center valve type LHK acc. to D 7100 o Over-center valve

More information

Orbital Motors OMS, OMT and OMV

Orbital Motors OMS, OMT and OMV MKING MODERN LIVING POSSIBLE Technical Information Orbital Motors OMS, OMT and OMV powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev February 216 Corrected Hardening specification

More information

a division of Enviro Safety Products

a division of Enviro Safety Products www.minutemanvac.com, a division of Enviro Safety Products.800.637.6606 Chassis 3 4 5 3 4 6 7 8 5 0 0 6 8 0 7 4 3 5 6 7 E 7e www.minutemanvac.com, a division of Enviro Safety Products.800.637.6606 Page

More information

Chuck quick-change ROTA FSW

Chuck quick-change ROTA FSW Translation of Original Operating Manual Chuck quick-change ROTA FSW Assembly and Operating Manual Superior Clamping and Gripping Imprint Imprint Copyright: This manual remains the copyrighted property

More information

Components for air preparation and pressure adjustment. OUT port position ( ) connected Rear side. of IN port. Air tank. directly.

Components for air preparation and pressure adjustment. OUT port position ( ) connected Rear side. of IN port. Air tank. directly. Components preparation and pressure adjustment ABP Overview ABP is a component that enables boosting by s only up to twice primary pressure (.0MPa max.) in combination with using air tank but not using

More information

WELDING POSITIONER MODEL NO:

WELDING POSITIONER MODEL NO: WELDING POSITIONER WP-250 13-3/4 Diameter Table 0 to 5.5 RPM Rotation Speed Manual Tilt Adjustment 0 to 90 Tilting Angle Standard w/foot Control Switch Shipping Weight 113 lbs. Designed for rotation of

More information

Livestock Equipment Bale Movers/ Bale Spears. Tractor Linkage. Grade 5 & 8 Hitch Pins. Tractor Linkage

Livestock Equipment Bale Movers/ Bale Spears. Tractor Linkage. Grade 5 & 8 Hitch Pins. Tractor Linkage Hooking a piece of equipment to your tractor? Our selection of hitch pins, locking pins, lift arm/top link parts, PTO adapters will keep things connected. Make sure you have an SMV sign to keep everyone

More information

SLEEVED PLUG VALVES 2-WAY

SLEEVED PLUG VALVES 2-WAY Specialty Valves 2-WAY ANSI/ASME CLASS 150 LBS Dimensions to ANSI B16.5 & B16.10 1 Six (6) top holes * 2 1/2 valves are made from 3 casting, but flanges are machined to 2 1/2 dimensions 1/2 4.25 108.00

More information

HOLLISTER-WHITNEY ROPE GRIPPER

HOLLISTER-WHITNEY ROPE GRIPPER HOLLISTER-WHITNEY ROPE GRIPPER Instructions for Model #620GA1, 620GA2 (US PATENT 8,511,437) WARNING: KEEP HANDS CLEAR OF ROPE GRIPPER. FORCES CREATED CAN CRUSH FINGERS. Figure 1 ROPE GRIPPER TM MOUNTING

More information

Chain Drives ELEMEN MESIN II

Chain Drives ELEMEN MESIN II Chain Drives ELEMEN MESIN II Introduction Belt and rope drives slipping may occur To avoid slipping Chains The chains are made up of number of rigid links which are hinged together by pin joints in order

More information

Process Solutions. Electronic Turbine Meter TERZ 94 PROVEN TECHNOLOGY. SUPERIOR PERFORMANCE.

Process Solutions. Electronic Turbine Meter TERZ 94 PROVEN TECHNOLOGY. SUPERIOR PERFORMANCE. Process Solutions Electronic Turbine Meter TERZ 9 PROVEN TEHNOOGY. SUPERIOR PERFORMNE. Electronic Turbine Meter TERZ 9 Method of Operation The TERZ 9 electronic turbine meter is a flow meter which directly

More information

EPOXY FITTINGS DIMENSIONS

EPOXY FITTINGS DIMENSIONS Bulletin No. A150 May 1, 2004 EPOXY FITTINGS DIMENSIONS 2"-16" GREEN THREAD fittings may be used with GREEN THREAD and RED THREAD II piping. Refer to Chemical Resistance Guide, Bulletin No. E5615, for

More information

Chain Drives. Chain Drives 759 C H A P T E R

Chain Drives. Chain Drives 759 C H A P T E R Chain Drives 759 C H A P T E R 21 Chain Drives 1. Introduction. 2. Advantages and Disadvantages of Chain Drive over Belt or Rope Drive. 3. Terms Used in Chain Drive. 4. Relation Between Pitch and Pitch

More information

PFH. Application example. Pneumatic 2-Finger Parallel Gripper Long-stroke Gripper. Weight 2.65 kg 12.6 kg. Gripping force 630 N 2950 N

PFH. Application example. Pneumatic 2-Finger Parallel Gripper Long-stroke Gripper.  Weight 2.65 kg 12.6 kg. Gripping force 630 N 2950 N PFH www.comoso.com Sizes 30 50 Weight 2.65 kg 12.6 kg Gripping force 630 N 2950 N Stroke per finger 30 mm 100 mm Workpiece weight 3.15 kg 13 kg Application example Assembly unit for intermediate sleeves

More information

Orbital Motors Type VMP. Technical Information

Orbital Motors Type VMP. Technical Information Orbital Motors Type VMP Technical Information A Wide Range of Orbital Motors Revision View Date Page Changed Revision May 213 All First edition AA F31 245 A Wide Range of Orbital Motors Sauer-Danfoss is

More information

Eurostyle Terminal Blocks Focus Product Stock List

Eurostyle Terminal Blocks Focus Product Stock List Eurostyle Terminal Blocks Focus Product Stock List Introduction Table of Contents In an ongoing effort to better serve the Industrial Machinery, Commercial, and HVAC markets, Tyco Electronics is pleased

More information

ModelsEZU-15 & EZU-15-R. BISHAMON INDUSTRIES CORPORATION 5651 East Francis Street Ontario, California 91761, USA (909) (800)

ModelsEZU-15 & EZU-15-R. BISHAMON INDUSTRIES CORPORATION 5651 East Francis Street Ontario, California 91761, USA (909) (800) UP P n e u m a t i c ModelsEZU-15 & EZU-15-R BISHAMON INDUSTRIES CORPORATION 5651 East Francis Street Ontario, California 91761, USA (909) 390-0055 (800) 231-3187 Table of Contents GETTING STARTED......................................

More information

Operating manual for the pressure transducer unit CCS 1000

Operating manual for the pressure transducer unit CCS 1000 Operating manual for the pressure transducer unit CCS 1000 Please read the operating manual before using the device. 1 Content: 1. General description 2. Technical data 3. Operation 4. Scope of supply

More information

Min. Metered Flow Capacity L/min. Max. Oper. Pressure Kgf/cm (0.04)* F- FC G N -11 H01. Max. Metered Flow Capacity L/min.

Min. Metered Flow Capacity L/min. Max. Oper. Pressure Kgf/cm (0.04)* F- FC G N -11 H01. Max. Metered Flow Capacity L/min. Flow Control These are pressure and temperature compensating type valves and maintain a constant flow rate independent of change in system pressure (load) and temperature (Viscosity of the fluid). They

More information

Design Guide MSW from M20 to M70. Original version of the design guide

Design Guide MSW from M20 to M70. Original version of the design guide Page 1 of 11 Original version of the design guide For Series Components Spieth locknuts (precision locknuts) MSW 20.28 MSW 20.40 MSW 25.28 MSW 25.40 MSW 30.28 MSW 30.44 MSW 35.28 MSW 35.44 MSW 40.28 MSW

More information

MUELLER. A A Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3.

MUELLER. A A Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3. Installation Instructions manual MUELLER table of contents PAGE A-20806 A-20807 Adjustable General Information 2 Technical Data 3 Dimensions 4 Installation 5-6 Parts 7 Maintenance 8 Vertical Indicator

More information

Bridge Plugs, Ball Drop & Caged Ball Plugs For Zone Isolation

Bridge Plugs, Ball Drop & Caged Ball Plugs For Zone Isolation Bridge Plugs, Ball Drop & Caged Ball Plugs For Zone Isolation ADVANTAGE composite bridge plug, caged ball and ball drop (flow thru) frac plug provide a means to isolate multiple zones during high pressure

More information

Priority (Swing) Motors Data and Specifications

Priority (Swing) Motors Data and Specifications s Data and Specifications Specifications HMF 55 HMF 75 HMF 105 cm 3/rev in 3/rev 55 3.36 75 4.57 105 6.40 Pressure Ratings Nominal 5000 PSIG Maximum 6090 PSIG Peak 7250 PSIG Operating Speed Maximum 4100

More information

OMS, OMT and OMV Orbital Motors. Technical Information

OMS, OMT and OMV Orbital Motors. Technical Information OMS, OMT and OMV Orbital Motors Technical Information OMS, OMT and OMV A Wide Range of Orbital Motors F300540.eps F300030.TIF A wide range of orbital motors Sauer-Danfoss is a world leader within production

More information

IN-PLANT VALVES. Serving the Water & Waste Water Industry Since Clow Valve is a division of McWane, Inc.

IN-PLANT VALVES. Serving the Water & Waste Water Industry Since Clow Valve is a division of McWane, Inc. Serving the Water & Waste Water Industry Since 1878 IN-PLANT VALVES Clow Valve is a division of McWane, Inc. www.clowvalve.com AUTOMATION MORIN ACTUATOR DESCRIPTION: The Morin Actuator is a heavy-duty,

More information

Mounting and Operating Instructions EB 3007 EN. Self-operated Pressure Regulators. Differential Pressure Regulators (opening) Type Type 42-25

Mounting and Operating Instructions EB 3007 EN. Self-operated Pressure Regulators. Differential Pressure Regulators (opening) Type Type 42-25 Self-operated Pressure Regulators Differential Pressure Regulators (opening) Type 42-20 Type 42-25 Type 42-20 Differential Pressure Regulator Type 42-25 Differential Pressure Regulator Mounting and Operating

More information

SI-F971A. 9-speed super narrow chain such as CN-7700 / CN-HG92 8- / 7- / 6-speed narrow chain such as CN-HG50 / CN-IG51

SI-F971A. 9-speed super narrow chain such as CN-7700 / CN-HG92 8- / 7- / 6-speed narrow chain such as CN-HG50 / CN-IG51 SERVICE INSTRUCTIONS SI-F971A Front Drive System Before use, read these instructions carefully, and follow them for correct use. WARNING Use neutral detergent to clean the chain. Do not use alkali-based

More information

Motion Controls Valve locator

Motion Controls Valve locator Motion Controls Valve locator unctional Symbol C C Model Cavity low Rating Typical Pressure Page OCV standard L/min (USgpm) bar (psi) CE A9 (5) 7 (4) - CE A66 (8) 7 (4) - CEH A66 (8) 5 (5) - CE9 A6 9 ()

More information

Hand lever valves VHER

Hand lever valves VHER Hand lever valves VHER Hand lever valves VHER Key features Powerful Flexible Practical -M- Flow 170 3800 l/min 4/3-way valve mid-position closed mid-position exhausted mid-position pressurised Connections:

More information

Full Range Pressure Compensating Variable Flow Control

Full Range Pressure Compensating Variable Flow Control Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. Rated for 3000 psi (207 bar). Weighs 7- ¾ lbs. (3.52 kg). 30-Micron Filtration Recommended. Torque to turn side lever

More information

ENGINEERING DESIGN GUIDE. D-M-E Hydraulic Unscrewing Device

ENGINEERING DESIGN GUIDE. D-M-E Hydraulic Unscrewing Device ENGINEERING DESIGN GUIDE D-M-E Hydraulic Unscrewing Device ENGINEERING DESIGN GUIDE D-M-E Hydraulic Unscrewing Device Hydraulic Unscrewing Device Without guiding thread with cam Safety Considerations Mold

More information

Operating instruction

Operating instruction Operating instruction MV, XV, HG, HP, RKO, D2G, TV, BV, WB & SLV 1 Introduction 2 2 Stafsjö s knife gate valves 2 3 Technical information 2 3.1 Pressure test 2 3.2 Labelling 2 4 Storage 3 5 Transportation

More information

Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW. Tel +44 (0)

Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW. Tel +44 (0) Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW Tel +44 (0)1254 615100 www.allspeeds.co.uk WIRE ROPE GRIPPER WGO135 (without manifold and intensifier) PRODUCT

More information

Installation, Operation & Maintenance Manual

Installation, Operation & Maintenance Manual Original Instructions Installation, Operation & Maintenance Manual Sentry VREL Control Valve Pressure Conditioning S-SW-IOM-00277-15 1-17 Table of Contents Safety Information... 3 General Safety Precautions...

More information

(1) Name of tube (2) Tube dia. (O.D./I.D.) (3) Tube length. (4) Tube color. Model UD0425. UD1290 O.D. I.D. (mm) UD1075 UD0860 UD

(1) Name of tube (2) Tube dia. (O.D./I.D.) (3) Tube length. (4) Tube color. Model UD0425. UD1290 O.D. I.D. (mm) UD1075 UD0860 UD The polyurethane tube, featuring excellent flexiblity, helps compact piping requiring small bending radius. The useful cut marks at 500mm interval are printed on the tube. Model UD0425 UD0640 UD0860 UD1075

More information

MEDICAL GAS OUTLETS & PROBES

MEDICAL GAS OUTLETS & PROBES MEDICAL GAS OUTLETS & PROBES Quick-connect medical gas outlets for operative connection of the medical equipment to medical gas supply systems TECHNICAL DATA Maximum inlet pressure to 10 bar Vacuum rarefaction

More information

KTM 50 (DN ) Installation, maintenance and operating instructions

KTM 50 (DN ) Installation, maintenance and operating instructions 52 762-306 09.2014 KTM 50 (DN 100-200) Installation, maintenance and operating instructions General High-performing and compact, these pressure-independent control valves for variable flow heating and

More information

OPERATOR S MANUAL FOR AirVANTAGE 10,000 OPM 3 x 4 in. (75 x 110 mm) ORBITAL SANDERS

OPERATOR S MANUAL FOR AirVANTAGE 10,000 OPM 3 x 4 in. (75 x 110 mm) ORBITAL SANDERS OPERATOR S MANUAL FOR AirVANTAGE 10,000 OPM 3 x 4 in. (75 x 110 mm) ORBITAL SANDERS Declaration of conformity AirVANTAGE Tools 10018 Lower Azusa Road, Unit #C; El Monte, California 91731 USA declare on

More information

REPAIR PARTS HYDRO GEAR TRANSAXLE - MODEL NUMBER

REPAIR PARTS HYDRO GEAR TRANSAXLE - MODEL NUMBER REPAIR PARTS HYDRO GEAR TRANSAXLE - MODEL NUMBER 319-0650 REPAIR PARTS HYDRO GEAR TRANSAXLE MODEL NUMBER 319-0650 NO. NO DESCRIPTION 1 532 14 29-30 Housing, Lower 2 532 14 29-31 Assembly, Upper Housing

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL INFORMATION Model No. Description RP2300FC, RP2301FC Router CONCEPT AND MAIN APPLICATIONS Models RP2300FC and RP2301FC are upgraded sister tools of our current plunge-type electronic router Model

More information

Keel-stepped and deck-stepped masts,

Keel-stepped and deck-stepped masts, Keel-stepped and deck-stepped masts, C-sections and F-sections The T-base and deck ring systems are made to fit both Seldén s conventional mast sections and their matching furling sections. They are also

More information

MDC Series. Marine Grade 4-Way Directional Control Valve With Or Without Flow Control MDCF16TH304H MDC16TH404HB

MDC Series. Marine Grade 4-Way Directional Control Valve With Or Without Flow Control MDCF16TH304H MDC16TH404HB Engineering & Manufacturing Solutions Specifications: MDC rated for -4 gpm (-151 lpm) MDCF rated for -3 gpm (-114 lpm) Rate for 3 PSI (27 bar) Port Sizes #16 SAE (1-5/16-12) all ports Weighs 16 lbs. (7.3

More information

Installation and operating manual. Pneumatic control station LK product no: PCS 1-10

Installation and operating manual. Pneumatic control station LK product no: PCS 1-10 LK product no: PCS 1-10 Article no: 74503 Revision:8 Article no: 74503 Revision: 8 2 (23) Contents 1. General information... 5 2. Safety precautions... 5 2.1 Significance of symbols... 5 2.2 Explanatory

More information

STAD. Balancing valves DN (MD60, MD61, MD62)

STAD. Balancing valves DN (MD60, MD61, MD62) STAD Balancing valves DN 15-50 (MD60, MD61, MD62) IMI TA / Balancing valves / STAD STAD The STAD balancing valve delivers accurate hydronic performance in an impressive range of applications. Ideally suited

More information

Please note: specifications are subject to change for improvement without notice. Apr by Shimano Inc. XBC IZM Printed in Japan

Please note: specifications are subject to change for improvement without notice. Apr by Shimano Inc. XBC IZM Printed in Japan One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003 These service instructions are printed on recycled paper. Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222 3-77

More information

Fisher Lever-Lock Handlever Actuators for POSI-SEAL A81 Rotary Valves

Fisher Lever-Lock Handlever Actuators for POSI-SEAL A81 Rotary Valves Instruction Manual D103319X012 Lever-Lock Handlever Actuator Fisher Lever-Lock Handlever Actuators for POSI-SEAL A81 Rotary Valves Contents Introduction................................. 1 Scope of Manual.........................

More information

R152SVBBC. Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar I S E R V I C E

R152SVBBC. Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar I S E R V I C E S E R V I C E 5 I0500103 IPL, R152SVBBC, 2005-04, 544 08 36-01 95417024202 R152SVBBC Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar 544 08 36-01 2 NO. NO. DESCRIPTION

More information

Channel Nuts & Hardware

Channel Nuts & Hardware Channel Nuts Channel nuts are one of the main components of our strut system. It is designed to provide essential gripping power and ease during installation. Channel nuts are press formed, machined and

More information

Orbital Motors OMSW with brake nose

Orbital Motors OMSW with brake nose MAKING MODERN LIVING POSSIBLE Technical Information Orbital Motors OMSW with brake nose powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev October 214 Changed to Danfoss layout

More information

INSTRUCTION MANUAL Pressure Relief Device LPT

INSTRUCTION MANUAL Pressure Relief Device LPT INSTRUCTION MANUAL Pressure Relief Device LPT 5COV475800 LPT REV00 CONTENT: 1 SAFETY 1.1 Safety instructions 2 1.2 Specified applications 2 1.3 Safety notes on the equipment operation 2 2 PRESSURE RELIEF

More information

Tools for rotary drilling 4 group

Tools for rotary drilling 4 group 4 group - Tools for hand rotary drilling - Tools for mechanical rotary drilling - Tools for underground drilling gotten sucking off method - arge diameter bits and rods for rotary drilling 1 The way of

More information

REPAIR PARTS MANUAL MODEL NUMBER BH55Y21RHA. Rotary Lawn Mower Rev BY Printed in U.S.A.

REPAIR PARTS MANUAL MODEL NUMBER BH55Y21RHA. Rotary Lawn Mower Rev BY Printed in U.S.A. REPAIR PARTS MANUAL MODEL NUMBER BH55Y21RHA Rotary Lawn Mower 532 18 92-21 Rev. 1 02.11.04 BY Printed in U.S.A. 2 ROTARY LAWN MOWER - - MODEL NO. BH55Y21RH (BH55Y21RHA) - PRODUCT NO. 964 77 46-01 ROTARY

More information

SKP Series SKP25 U.. Pressure Regulating Gas Valve Actuator with Safety Shut-off Function

SKP Series SKP25 U.. Pressure Regulating Gas Valve Actuator with Safety Shut-off Function SKP Series SKP25 U.. Pressure Regulating Gas Valve Actuator with Safety Shut-off Function Technical Instructions Document No. 155-752 SKP25 U.. Description Only when assembled to Series VG Gas valves SKP25

More information

Gas Pressure Regulator HON 300

Gas Pressure Regulator HON 300 Product information serving the gas industry worldwide Applications, characteristics, technical data Applications direct acting gas pressure regulator, for systems in accordance with DVGW working instruction

More information

Technical Diving Equipment

Technical Diving Equipment POMMEC LARS SYSTEM EASILY CONVERTED TO WET BELL SYSTEM POMMEC 2 DIVER LAUNCH AND RECOVERY SYSTEM WITH DIVING BASKET This Launch and Recovery System is specifically designed to provide a compact option

More information

Harmony. Pressure Independent Balancing and Control Valve

Harmony. Pressure Independent Balancing and Control Valve Harmony Pressure Independent Balancing and Control Valve IMI FLOW DESIGN / Pressure Independent / F376.0 Harmony HARMONY The Harmony delivers a complete hydronic balancing and control solution that optimizes

More information

TEKS Lesson 6.8E: Machines

TEKS Lesson 6.8E: Machines 6.8E Investigate how inclined planes and pulleys can be used to change the amount of force to move an object. : Machines What is a machine? A machine is a device that allows you to do work in a way that

More information

Operating instructions Safety Rope Emergency Stop Switches ZB0052 / ZB0053 ZB0072 / ZB0073

Operating instructions Safety Rope Emergency Stop Switches ZB0052 / ZB0053 ZB0072 / ZB0073 Operating instructions Safety Rope Emergency Stop Switches UK ZB0052 / ZB0053 ZB0072 / ZB0073 7390878 / 02 03 / 2011 Contents 1 Safety instructions...3 2 Installation / set-up...4 2.1 Applications...4

More information

Model 700 Torque Limiter

Model 700 Torque Limiter Model 700 Torque Limiter INSTALLATION, MAINTENANCE AND PARTS MANUAL to view the video "Setting a Torque Limiter" https://youtu.be/qyz94tc1zfg For additional copies of this manual, please visit our website

More information

420 Mobile Piston Pump Design Code B

420 Mobile Piston Pump Design Code B 42 Mobile Piston Pump Design Code B ADU41 ADU49 ADU62 ADU8 Introduction 42 Series Mobile Piston Pump Eaton s 42 Series mobile pumps are open circuit, axial piston designs with displacements of 41cc, 49cc,

More information

Air tappers. Air drills and tappers. Tapping capacity: from Ø 6 to 18 mm. For stud bolts and inserts. Type of grip: straight and pistol models

Air tappers. Air drills and tappers. Tapping capacity: from Ø 6 to 18 mm. For stud bolts and inserts. Type of grip: straight and pistol models Air drills and tappers Air tappers Tapping capacity: from Ø to 1 mm (on mild steel) For stud bolts and inserts Type of grip: straight and pistol models INDUSTRIAL AIR TOOLS Choosing the right air tapper

More information

6000SLX HYDRAULIC CRAWLER CRANE

6000SLX HYDRAULIC CRAWLER CRANE HYDRAULIC CRAWLER CRANE HYDRAULIC CRAWLER CRANE Contents Specifications 3-4 Symbols 4 Outline Winch Assingment 5 Dimensions & Main Specifications : Liftcrane 6 Dimensions & Main Specifications : Luffing

More information

MUELLER A A Non-Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3.

MUELLER A A Non-Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3. Installation Instructions manual MUELLER table of contents PAGE A-20808 General Information 2 Technical Data 3 Dimensions 4 A-20809 Non-Adjustable Installation 5-6 Parts 7 Maintenance 8 Vertical Indicator

More information

Technical Data Sheet TI-F50 Locking Units series KFH

Technical Data Sheet TI-F50 Locking Units series KFH English translation of German original Locking Units series KF Further important practical advice is given in Operating Manual BA-F50., Rod diameter 18 mm 50 mm øz 8 L 2 6 x 6 0 min. 4x30 KF 18 to KF 32,

More information

CABLE REPAIR PROCEDURE 2100 Series, 2000 Series & Eventer

CABLE REPAIR PROCEDURE 2100 Series, 2000 Series & Eventer August 2005 CABLE REPAIR PROCEDURE 2100 Series, 2000 Series & Eventer 2000 SERIES 2100 SERIES EVENTER 7514 Alabonson Rd. Houston, Texas 77088 281-999-6900 281-999-6966 (fax) 51A Caldari Rd., #16 Concord,

More information

MTS Restan. Automatic System for Residual Stress Measurement by Hole-Drilling

MTS Restan. Automatic System for Residual Stress Measurement by Hole-Drilling Automatic System for Residual Stress The MTS3000 - Restan system for measuring residual stresses Fully automatic drilling and acquisition process ensuring high repeatability High speed drilling (400,000

More information

Gears Ratios and Speed / Problem Solving

Gears Ratios and Speed / Problem Solving Teacher Mechanics Note to the teacher On this page, students will learn about the relationship between gear ratio, gear rotational speed, wheel radius, diameter, circumference, revolutions and distance.

More information

OWNER'S MANUAL LOCK-N-LOAD BULLET FEEDER (PISTOL)

OWNER'S MANUAL LOCK-N-LOAD BULLET FEEDER (PISTOL) OWNER'S MANUAL LOCK-N-LOAD BULLET FEEDER (PISTOL) Table of Contents ASSEMBLY ASSEMBLY Pistol Bullet Feeder... Page 3 CHANGE-OVERS The Hornady Lock-N-Load Pistol Bullet Feeder is capable of feeding most

More information

INTERNATIONAL OIML R 32 RECOMMENDATION. Rotary piston gas meters and turbine gas meters ORGANISATION INTERNATIONALE INTERNATIONAL ORGANIZATION

INTERNATIONAL OIML R 32 RECOMMENDATION. Rotary piston gas meters and turbine gas meters ORGANISATION INTERNATIONALE INTERNATIONAL ORGANIZATION INTERNATIONAL OIML R 32 RECOMMENDATION Edition 1989 (E) Rotary piston gas meters and turbine gas meters Compteurs de volume de gaz à pistons rotatifs et compteurs de volume de gaz à turbine OIML R 32 Edition

More information

Pure-Flo Handwheel Operated Valves (903, 913, 963) Instruction Manual

Pure-Flo Handwheel Operated Valves (903, 913, 963) Instruction Manual PFMM-08 Pure-Flo Handwheel Operated Valves (903, 913, 963) Instruction Manual This manual provides installation, operation and maintenance instructions for Pure-Flo Diaphragm Valves (with 903, 913, 963

More information

Products no longer available

Products no longer available Technical data sheet R2.. Characterized control valves, 2-way, with internal thread for open and closed cold and warm water systems for modulating control on the water side of air-handling and heating

More information

Parts Manual. Fairway and T-Plex Cutting Units WARNING G (rev. 0)

Parts Manual. Fairway and T-Plex Cutting Units WARNING G (rev. 0) A Textron Company Parts Manual Fairway and T-Plex Cutting Units Series: AA - (JMAB336/479/431/482) T-Plex 185 Series ZX 26 5K Floating Head Cutting Unit AB - (JMAB429/480) T-Plex 185 Series ZX 26 7K Floating

More information

PRODUCTS. Where is the Best? AIR INDEX CYLINDER...MD MECHANICAL MULTIPOINT STOP UNIT...MSP MICRO-INDEX CYLINCER...MMD. Air Index Table...

PRODUCTS. Where is the Best? AIR INDEX CYLINDER...MD MECHANICAL MULTIPOINT STOP UNIT...MSP MICRO-INDEX CYLINCER...MMD. Air Index Table... Air motive power PRODUCTS Stagehand of Smoothly Operating System Where is the Best? To express movement, a designer selects actuators. The actuators and peripheral equipment selected according to conventional

More information

Liquid ring compressors

Liquid ring compressors Liquid ring compressors KPH 85220, KPH 85227 Compression pressures: Suction volume flow: 2 to 7 bar 940 to 1450 m³/h CONSTRUCTION TYPE Sterling SIHI liquid ring compressors are displacement compressors

More information

safety Shut-Off Valve HON 721

safety Shut-Off Valve HON 721 safety Shut-Off Valve HON 7 product information serving the gas industry worldwide safety shut-off valve HON 7 safety shut-off valve HON 7 Application, Characteristics, Technical Data Application safety

More information