Tools for rotary drilling 4 group
|
|
|
- Marilynn Conley
- 6 years ago
- Views:
Transcription
1 4 group - Tools for hand rotary drilling - Tools for mechanical rotary drilling - Tools for underground drilling gotten sucking off method - arge diameter bits and rods for rotary drilling 1
2 The way of creating the catalogue number rill bits Group of product Bit diameter (mm) Version Connection type Sinter grade mm 0 Basic version 1 9 iffer depends on the fastening type (cotter pin, external thread or internal thread) 2 - B2 4 - B G Example: drill bits with bit diamete 43, fastening on the cotter pin, with sinter grade B2. Screw rods d 2 d 2 d Group of product Bit diameter (mm) Version enght of rod (dcm) iffer depends on the rod type Without flushing hole dcm For group 32 - factory number Example: screw rod with shank 18x55, with diameter 39, without flushing hole, with total length =2,5m. 2
3 arge diameters bits for rotary drilling Group of product Bit diameter (mm) Version Sinter grade Thread type 54 Bits 55 rill bits mm 0 4 iffer depends on the bit type or part of complete bit 2 - Grade B2 4 - Grade B40 For group iffer depends on the conneciton type Example: bits with diameter 115 mm complete, basic version, with sinter grade B40. Hollow rods d 2 d Group of product Bit diameter (mm) Version enght of rod (dcm) mm 0 9 iffer depends on the rod type or connection type dcm Example: hollow rod with extension diameter 76, with 2 3 / 8 WP thread, with effective length = mm. 3
4 The way of creating the catalogue number Rods with thread connections for mechanical drilling S 1 S d d S Group of product Shank type Threat type Threat size enght of rod (dcm) iffer depends on the type and dimension of shank part 1 9 iffer depends on the thread type (metrical, inch, rope) 1 9 iffer depends on the thread size (side d ) Example: Hexagonal rod 22, with hexagonal shank 19 with internal metrical thread, with length =2400mm. 4
5 Tools for hand rotary drilling Way of connecting rill bit BOB /64 21/32 11/16 3/ rill bit CAROX rill bit with wedge-shaped shank 34 11/ Rhombic screw rods R /4 2 1/2 5 7/
6 Tools for hand rotary drilling Rhombic screw rods R37 mm Rd 20 A /4 2 1/ /4 2 1/ Rhombic rods R37 with rhombic shank / Finned screw rods Z39, Z52 Finned rods Z39 with BOB shank 12,
7 Tools for hand rotary drilling Finned screw rods Z39, Z52 mm 13,5 13, /4 2 1/2 5 7/ Rd16x1/ /4 2 1/ mm mm mm Rd16x1/8 Rd16x1/ / ,5 12,8 Rd16x1/ /
8 Tools for mechanical rotary drilling rill bits rill bit with threa/ 28,5 30 1/2 mm inch 1 1/8 1 3/ rill bit with thread 28, /8 1 3/16 1 1/4 1 3/ ,5 1 1/ ,5 1 1/ / rill bit with thread Rd 3Gg/ /
9 Tools for mechanical rotary drilling rill bits mm inch rill bit with thread A / A17 59 A /8 1 1/ rill bit with thread A A /64 1 1/2 1 37/64 1 5/8 1 21/ / rill bit with thread Rd Rd /2 1 37/64 1 5/8 1 21/ / rill bit with thread Rd / Rd rill bit with thread R 25 right / R25 prawy 90 rill bit with thread Cr / Cr rill bit with rope thread 4 o /32 1 3/ o 4 9
10 Tools for mechanical rotary drilling Hex rods R22 right R22 right R22 right R22 right R25 right R25 right R22 right / / 10 1/ /8 10 1/ A17 R22 right Rd20 40 R22 right A /
11 Tools for mechanical rotary drilling Hex rods A A17 R22 right ,5 A17 6 3/ /8 10 1/ /4 10 1/ / A20 A20 A20 R22 right R25 right A A17 A17 R32 right R22 right A20 R32 right A20 A
12 Tools for mechanical rotary drilling Hex rods Rd /4 2 1/ R22 righty R32 right Rd / / /8 2 5/ /8 25/ / / / / / / A / /4 2 2/
13 Tools for mechanical rotary drilling Hex rods Rd / / / R22 right Coupling R 22 right R 22 right mm inch / / Adapters mm M 16 A A Adapters A20 A Rd
14 Tools for underground drilling by gotten sucking off method rill bit kt rill bit s adapter Rod s adapter hex Rod s pipe hex /8 5 1/
15 Tools for underground drilling gotten off method sucking rill bit kt rill bit s adapter Rod s adapter hex Rod s pipe hex /8 5 1/
16 arge diameter bits and rods for rotary drilling rill bits rill bit Pilot bit 48 (pilot) cz M24 Rd 84 rill bit Rd poz. mm inch części rill bit /2 cz cz Rd rill bits rill bit gw2.wp rill bit 115 cz gw2.wp
17 arge diameter bits and rods for rotary drilling Milling cutter for drill bits mm inch 4 1/2 cz cz cz cz Pilot bit 65 (pilot) cz Hollow rods Hollow rod with threads Cr Cr32 32 Rod s adapter with threads Cr Cr32 Cr32 32 Cr Hollow rod Cr Cr42 Cr42 42 Rod s adapter with threads Cr Hollow rod with threads Cr Cr51 Cr51 51 Cr42 Cr42 42 M
18 arge diameter bits and rods for rotary drilling Hollow rods Rod s adapter with threads Cr / Cr51 Cr Hollow rod with threads Cr60, Rod s adapter with threads Cr60, Cr60,3 63 Cr60,3 60,3 150 Hollow rod with threads Cr Hollow rod with threads Cr Hollow rod with threads Cr Hollow rod with threads Cr60, Cr60,3 60,3 Hollow rod with threads N N42 N42 Cr51 Cr51 51 Cr42 Cr42 42 Cr32 Cr Hollow rod with threads N51 N51 N /
19 arge diameter bits and rods for rotary drilling Hollow rods mm inch Hollow rod with threads Rd Rd40 x1/6 Rd40 x1/ / Hollow rod with threads Rd40 65 Rd40 x1/6 Rd40 x1/ Hollow rod 60 with threads Rd50 3/ Hollow rod 76 with threads Rd / Hollow rod with threads Rd Rd70x1/4 Hollow rod 76 with threads 2 WP (hand screwing) 2800 gw.2.3/ Hollow rod 76 with threads 2 WP (machine screwing) /8 2 2/ Rd50 76 Rd50 Rd50 60 Rd50 Rd gw.2.wp Rd50 Hollow rod 80 with threads 2 WP /8WP 80 19
20 arge diameter bits and rods for rotary drilling Adapter couplings for rods and hammers connection Adapter coupling 2 WP / int. Rd48x1/ gw. 2.WP Rd 48x1/6 50 Adapter coupling 2 WP / int. 2 WP Adapter coupling Rd50x1/6 / int. 2 WP gw. 2.WP Rd50 x1/ WP 2 WP Broaching bit /16 3/ Coring bits mm inch Thread / / TrW30 TrW Thread Thread / / TrW53 TrW70 TrW Thread /8 4 13/ / /16 15/16 TrW85 TrW107 TrW
21 arge diameter bits and rods for rotary drilling Coring bits mm inch Thread Catalogue no / /64 TrW Thread / /8 TrW52 TrW Thread Thread /8 4 13/ / / /64 1/8 15/32 3/64 TrW84 TrW104 TrW120 TrW
INSTALLATION INSTRUCTIONS: SCTB1600
INSTALLATION INSTRUCTIONS: SCTB1600 DESCRIPTION: BOLLARD, 1600 DWG: INSTALL_SCTB1600 REV: M01 BASE TYPE B1 DIRECT BURIAL - PG. 6: BOLLARD IS PERMANENT, IT IS DIRECTLY BURIED INTO CONCRETE BASE TYPE B2
Operating instruction for the quick-change tap holders type:
type: HF 20 HF 30 Date of edition: 15.07.2008 Stage of alteration: 4 Please keep this for future use! Contents: 1 Application range, safety instructions and technical data... 3 1.1 Application range,
MUELLER A A Non-Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3.
Installation Instructions manual MUELLER table of contents PAGE A-20808 General Information 2 Technical Data 3 Dimensions 4 A-20809 Non-Adjustable Installation 5-6 Parts 7 Maintenance 8 Vertical Indicator
MUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5.
Installation Instructions manual MUELLER table of contents PAGE A-20814 Wall Type General Information 2 Technical Data/ Dimensions Installation 4-5 Maintenance 6 Parts 7 Indicator Post! WARNING: 1. Read
Diamond cutting tools Applications guide
Applications guide KLINGSPOR Diamond Cutting Blades are the logical supplement to the Kronenflex Cutting-Off Wheels programme. These wheels provide economical cutting of mineral materials because of their
MODEL TRIPEX PULLEY SYSTEM
MODEL 922184 TRIPEX PULLEY SYSTEM 1 PARTS LIST FOR TRIPEX PULLEY SYSTEM Note: Check with your architect or a professional contractor for hardware required to attach the unit to the wall and floor in your
MODEL / SINGLE and DUPLEX PULLEY SYSTEMS
MODEL 922181/922182 SINGLE and DUPLEX PULLEY SYSTEMS MODEL 922181 SINGLE PULLEY SYSTEM MODEL 922182 DUPLEX PULLEY SYSTEM 1 PARTS LIST FOR SINGLE/DUPLEX COLUMN PULLEYS Note: Check with your architect or
MUELLER. A A Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3.
Installation Instructions manual MUELLER table of contents PAGE A-20806 A-20807 Adjustable General Information 2 Technical Data 3 Dimensions 4 Installation 5-6 Parts 7 Maintenance 8 Vertical Indicator
Mfg. No: Grass Catcher, Single Bag (Export)
Parts Manual Mfg. No: 7600237 Grass Catcher, Single Bag (Export) Copyright Briggs and Stratton. All Rights reserved 01-Apr-2019 Model Components Table Of Contents Page Single Catcher........................................................................................
dumont Minute Man Broaches
Catalog K dumont Minute Man Broaches Standard and Special Broaches Keyway Broaches and Sets Internal Hole and Surface Broaches The dumont Company, Greenfield, Massachusetts www.dumont.com The dumont Company
MODEL CHEST PULLEY SYSTEM
MODEL 9180 CHEST PULLEY SYSTEM 1 PARTS LIST FOR CHEST PULLEY Note: Check with your architect or a professional contractor for hardware required to attach the unit to the wall and floor in your facility.
New Drilling Tools for Hard Rock Nordic Geotechnical Meeting 2012, Copenhagen
Nordic Geotechnical Meeting 2012, Copenhagen Gordian Ulrich Product Management Nordic Geotechnical Meeting 2012, Copenhagen 1. Commonly used tools for rock 2. Introduction of the Multi Hammer Tool (MHD)
SHUR-LOK CORPORATION TECHNICAL SALES BULLETIN
Page 1 of 11 1. SCOPE: 1.1. This provides the minimum design, port preparation, and installation and removal requirements for SLAS5103 plugs and is applicable when specified on engineering drawings. These
Adjustable Broaching Head 3. Fixed Braoching Heads 4. Broaching Bits Hexagonal 5. Broaching Bits Square 6. Broaching Bits Torx 7
Rotary Broaching Heads & Accessories The Broaching Toolholder is a device that enables the processing of regular shapes (hexagons, squares etc.) in through and blind holes. The Broaching Tool is inclined
Highbond anchor FHB II-A S
Highbond anchor FHB II-A S The best performance in cracked concrete with the least installation effort VERSIONS APPROVALS zinc-plated steel stainless steel high corrosion-resistant steel ADVANTAGES BUILDING
G SERIES METRIC MACHINE SCREW ACTUATOR
G SERIES METRIC MACHINE SCREW ACTUATOR kn to 0kN Duff-Norton metric actuators are manufactured to the same high quality standards and include all the same features and benefits as the standard line of
SHUR-LOK CORPORATION TECHNICAL SALES BULLETIN
Page 1 of 9 1. SCOPE: 1.1. This provides the minimum design, port preparation and installation and removal requirements for SLAS4383-XX-XX, SLF2002-XX-XX and SLF3004-XX-XX adapter reducer and is applicable
SpeciÞcations. Engine Dimensions Dimensions in millimeters. Inch equivalents shown in [].
![SpeciÞcations. Engine Dimensions Dimensions in millimeters. Inch equivalents shown in [].](/thumbs/77/75006228.jpg "SpeciÞcations. Engine Dimensions Dimensions in millimeters. Inch equivalents shown in [].")
SpeciÞcations Engine Dimensions Dimensions in millimeters. Inch equivalents shown in []. Ê ßÔ Ê ÛÝ Ñ Ê Û ÎÊ Û É 5 ENGINE IDENTIFICATION NUMBERS Kohler engine identiþcation numbers (model, speciþcation
New Product. featuring an exclusive dual directional head* Innovative Fastening Technologies. From the makers of. * Patent-pending design.
Innovative Fastening Technologies New Product featuring an exclusive dual directional head* Light-Gauge * Patent-pending design Wood From the makers of Concrete High Performance in Threaded Anchoring The
Drop-In Internally Threaded Anchor (DIAB) Mechanical Anchors. Key features. Material: Carbon steel. Coating: Zinc plated
Drop-In Internally Threaded Anchor (DIAB) Expansion shell anchors for use in solid base materials Simpson Strong-Tie introduces a new, redesigned Drop-In Anchor (DIAB) that provides easier installation
Confer Plastics Inc. - Installation Manuals CONFER PLASTICS, INC. CONFER PLASTICS, INC. POOL ENTRY SYSTEM FOR ABOVE-GROUND POOLS
Page 1 of 6 Other Installation Manuals CONFER PLASTICS, INC. CONFER PLASTICS, INC. POOL ENTRY SYSTEM FOR ABOVE-GROUND POOLS Adjusts to fit most above-ground pools with flat or slightly dished bottoms PARTS
Instruction Manual. PE-25/32/37 Tapping Machines. POLYTAPP Valves
Instruction Manual PE-25/32/37 Tapping Machines & POLYTAPP Valves Nov 2016, Revision 2 Document Number 3000111 2 M.T. Deason Company, Inc. PO Box 101807 Birmingham, AL 35210 Phone: 205 956 2266 Fax: 205
Hydraulic and Electrical Service Loop Pins
Product Bulletin # TDS-164 Hydraulic and Electrical Service Loop Pins Affected Units All Canrig top drive models with a hydraulic and electrical service loop installed. Service Loop Pins The ends of the
Digital directional & flow control valves D-DF(R)G
Digital directional & flow control valves D-DF(R)G Functional Symbols Model Code D-DFG- D-DFG-~ D-DFRG-/ D-DFG--C--- Digital directional & flow control valve Size Spool type (neutral position) : ll ports
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
4400 TwinHybrid Gas Seal
4400 TwinHybrid Gas Seal EQUIPMENT PREPARATION MECHANICAL SEAL INSTALLATION INSTRUCTIONS 1 2 200.005" 0,13 mm 125 µ" 3,2 µm R a 3 4 32 µ" 0,8 µm R a 1000 ±.002" 0,05mm CAUTIONS These instructions are general
THREAD/SCREW - Drill & Tap Chart
Machine Screw THREAD/SCREW Drill & Tap Chart Threads Per Inch Min Dia Alum, Brass, & Plasitcs 75% Thread Tap Drills Stainless Steel, Steels & Iron 50% Thread Clearance Hole Drills Close Fit All Materials
ECP Series Explosionproof Enclosures for OEM Applications. Optimized design, extensive sizes, and fast lead times.
ECP Series Explosionproof Enclosures for OEM Applications Optimized design, extensive sizes, and fast lead times. ECP Series Explosionproof Enclosures, the latest addition to our portfolio of electrical
Below are the instructions to build a roller-furling unit for under $10. Read the entire process before beginning the project.
Greg Cowens' $10 PVC Roller Reefing for CP-16's by Greg Cowen Below are the instructions to build a roller-furling unit for under $10. Read the entire process before beginning the project. Materials: 2
Bridge Plugs, Ball Drop & Caged Ball Plugs For Zone Isolation
Bridge Plugs, Ball Drop & Caged Ball Plugs For Zone Isolation ADVANTAGE composite bridge plug, caged ball and ball drop (flow thru) frac plug provide a means to isolate multiple zones during high pressure
All Purpose Wooden Crate
All Purpose Wooden Crate I built a wooden crate to carry supplies in, such as, propane, ammo, fake explosives, tape and whatever else will fit in it. I would like to say right off the start that this does
Stand-N-Fish FULL DETAIL INSTALLATION INSTRUCTIONS
1 Stand-N-Fish FULL DETAIL INSTALLATION INSTRUCTIONS Thank you for purchasing the incredible new Stand-N-Fish Kayak Fishing System. Once installed on your kayak the Stand-N-Fish will take your kayak fishing
GASKET CUTTER SYSTEMS
Product Catalog No. 0503 New Metric Sizes Included GASKET CUTTER SYSTEMS The Leader In Gasket Cutting Tools for Over 75 Years EXTENSION GASKET CUTTERS Now you can cut accurate gaskets quickly and efficiently
Typical Strength of Glued Connection. Typical Strength of Screwed Connection
Rodder Introduction DCD offers one of the most comprehensive range of Rodders available anywhere in the world - from the smallest 1/8 dia. Fish Tapes to the rugged 1/2 Rodders. The Rod DCD rods are manufactured
TECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. TD0101, TD0101F Description Impact Driver L PRODUCT P 1/ 14 CONCEPT AND MAIN APPLICATIONS Models TD0101 and TD0101F are cost-competitive 100N.m-class impact driver developed
Hardened Steel Washers
USS (Type A Wide) Flat Washers Hardened Steel Washers Grade 8 S.A.E. Dimensions American Standard Lbs. Per No./Pcs. Gauge M Pcs. Per Lb. 3/16 9/16 1/4 18 (3/64) 2.8 361 1/4 3/4 5/16 16 (1/16) 6.7 149 5/16
Router Bits with Replaceable Knives
Router Bits with Replaceable Single Flute Straight Bits 100 Straight Bits with Plunging 101 Pattern Bits 102 ouble Flute Flush Trim Bits 102 ouble Flute Chamfer Bits 103 ouble Flute Roundover Bits 103
A Low Cost Digital Angle Gage, version 3
A Low Cost Digital Angle Gage, version 3 By R. G. Sparber Copyleft protects this document. 1 Sometimes re-inventing the wheel has advantages. What you see here is just a variation on a sine bar. The accuracy
Dimensions & Specifications
Dimensions & Specifications These pages illustrate our commonly used punches, dies and related tooling for Mubea Ironworkers. Refer to our Cross Reference Catalog for the proper tooling to fit your machine.
TZ WEDGE ANCHOR FOR CRACKED AND UNCRACKED CONCRETE
www.ucanfast.com TECHNICAL MANUAL SECTION 2.2 PAGE 1 / 10 ä DESCRIPTION UCAN TZ torque controlled mechanical expansion wedge anchors have a Category 1 classification. They are used to resist static, wind
Armatures for analytical probes
Armatures for analytical probes For many different types of installations and applications Large range of probe holders General purpose, water treatment, food & beverage, pharmaceutical applications Type
TOPSLOT End Mill and Modular Type Expansion
1/10 TOPSOT End Mill and Modular Type Expansion 2/10 TOPSOT End Mill and Modular Type Expansion FEATURES Insert features ➊ Robust insert design for tangential slotting by 4 corner cutting edges (2 right/
IMPORTANT: RECEIVING INSTRUCTIONS:
Instruction Sheet Sidewinder Mechanical Bender IMPORTANT: RECEIVING INSTRUCTIONS: Visually inspect all components for shipping damage. If any shipping damage is found, notify carrier at once.shipping damage
COPROD drill strings. for SmartROC C50 and SmartROC CL
COPROD drill strings for SmartROC C50 and SmartROC CL COPROD drill strings the best of both worlds COPROD is a unique, patented rock drilling system from Epiroc. It combines the high penetration rate and
Bull s-eye Levels and Screw-On Levels
Bull s-eye Levels and Screw-On Levels Technical information Definition of terms A spirit level is a hollow body filled with a fluid and a gas bubble which is used to check the horizontal position of an
LJ1-25 LouieJRtm Tapping Machine
1/21/08 WARNING: Before using this product, read owners manual and follow all Safety Rules and Operating Instructions. LJ1-25 LouieJRtm Tapping Machine OPERATIONS MANUAL & OPERATING INSTRUCTIONS 30230
R152SVH. Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar
SERVICE I0700098 IPL, R152 SVH, 2007-03, 544 39 00-02 96141013300 R152SVH Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar 544 39 00-02 2 4 3 1 532 19 05-82 Handle, Grassbag,
SERIES 2 RAMP OWNER S MANUAL TOOLS REQUIRED: BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup.
SERIES 2 RAMP OWNER S MANUAL BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup. Use caution and care for your back when lifting, pushing, pulling, folding or unfolding
Mounting and Operating Instructions EB 8546 EN. Type 4708 Supply Pressure Regulators. Translation of original instructions. Type Type
Type 4708 Supply Pressure Regulators Translation of original instructions Type 4708-53 Type 4708-64 Type 4708-12 Mounting and Operating Instructions Edition March 2018 Note on these mounting and operating
IECEx Certificate of Conformity Annexe
for Certificate No.: IECEx TSA 09.004X Issue No.: 1 Equipment description pertaining to Issue 0 of this Certificate: A range of electrical power distribution, control, protection and monitoring equipment
Hoist Ring Forged Hoist Ring Machined Hoist Ring (Metric) Hoist Ring Swivel Shoulder Eyebolts JD Weld-On Alloy Lifting
Hoist Ring Forged........................... 94 Hoist Ring Machined........................ 95 Hoist Ring (Metric).......................... 96 Hoist Ring Swivel........................... 97 Shoulder
Low Wind High Yields Series
Low Wind High Yields Series Wind Turbines USER S MANUAL Introduction Low Wind High Yields Series rotor blades apply the latest advanced thermoplastic engineering and are manufactured by precision injection
Torque Specifications
SENR3130-10 Torque Specifications All Caterpillar Products S/N From the library of Barrington Diesel Club CONTENT General Information 01/07/2005 Introduction to Torque 01/07/2005 Torque-Turn 01/07/2005
L.Ph. Bolander & Sons 1355 Evans Ave. 800/
L.Ph. Bolander & Sons 1355 Evans Ave. 800/434-5611 San Francisco, Ca. 94124 Fax 415/648-0402 GOUNDSET ALUMINUM FLAGPOLE INSTALLATION INSTRUCTIONS STEP 1: DIG THE HOLE TO THE DIMENSIONS LISTED BELOW STEP
Pressure reducing valve, direct operated
Electric Drives and Controls Table of contents Hydraulics Pressure reducing valve, direct operated Model ZDR 6 D Nominal size 6 Series 4X Maximum operating pressure 20 bar (3050 PSI) Maximum flow 50 L/min
THOR 10 HAMMER CAGE INSTRUCTIONS
75 " 7m 78 4" m 6" 8.8m 45 ".70m 4.9deg 6 4" 6m 44 4".67m 75 " 7m 9 4" 0m 44".m 497 4".64m The 70, Thor Hammer Cage, consists of four heavy duty aluminum net poles. The unique pole structure reduces the
Special Note: Single Pawl Spacer is required when using a Ratchet Pawl Assembly.
Line Overview The automatic spring-fed knives feature of this tool prevents excessive strain from being applied from the rig floor that could cause the knives to burn or break before the cut is completed.
1305 Series Pressure Reducing Regulators
Instruction Manual Form 1095 1305 Series October 2009 1305 Series Pressure Reducing Regulators! Warning Fisher regulators must be installed, operated, and maintained in accordance with federal, state,
Anchor Component Material Standard Mechanical Properties
SECTION 4.1 PAGE 1 / 5 l description The UCAN sleeve anchor is a light-medium duty anchor ideal for applications in concrete, hollow block and brick. It is a mechanical expansion anchor assembled with
Float Equipment TYPE 925/926
Type 925 Float Collar Plunger Valve Float Equipment For less demanding well conditions, such as shallower depths or lower pressures, Top- Co offers economical float equipment certified to API RP 10F category
B-Too Drilling and Tapping Machine
Material Specifications Powered by hand or with Ridgid 690 (TM-29) High strength, modular aluminum and steel components Inserts any 3 /4" to 1" corporation stop under pressure Extracts threaded corporation
MUELLER. Mega-Lite Drilling Machine. Reliable Connections. table of contents PAGE. Equipment 2. Operating Instructions 3-4. Parts Information 5
operating Instructions manual MUELLER Mega-Lite Drilling Machine table of contents PAGE Equipment 2 Operating Instructions 3-4 Parts Information 5 Travel Charts 6-11! WARNING: 1. Read and follow instructions
Moai Bike Rack Heavy Duty Submittal Sheet. Materials: 2.0 Schedule 40 Pipe (2.375 OD) Finishes: Capacity: Mount Options: Setbacks: 2 Bikes
Submittal Sheet Materials: 2.0 Schedule 40 Pipe (2.375 OD) Finishes: Galvanized An after fabrication hot dipped galvanized finish is available. Powder Coat Our powder coat finish assures a high level of
North American sealing solutions Bridge Plug Ball Drop Frac Plug Caged Ball Frac Plug
North American sealing solutions Bridge Plug Ball Drop Frac Plug Caged Ball Frac Plug The North American Sealing Solutions composite bridge plug, caged ball and ball drop (flow thru) frac plug provide
MANUFACTURING TECHNOLOGY
MANUFACTURING TECHNOLOGY UNIT V Machine Tools BASIC PRINCIPLES OF BROACHING Broaching is a machining process for removal of a layer of material of desired width and depth usually in one stroke by a slender
VSL MINING & TUNNELING SYSTEMS VSL. mining and tunneling
VSL MINING & TUNNELING SYSTEMS VSL mining and tunneling VSL Mining & Tunneling Bolt systems VSL offers three type of bolting system for the mining & Tunnelling industry VSL-S Solid Threaded bolts. Continuous
FLEXIBLE SHAFTING (Wet & Dry)
TM-5 April 5, 2004 Elliott offers a complete line of precision tube tools, including: tube expanders Boiler Expanders Heat Exchanger Expanders Condenser Expanders Refinery Expanders tube rolling motors
GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS
GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS CONTINENTAL INDUSTRIES, INC. The Ultimate Connection CONTINENTAL INDUSTRIES, INC. ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, Inc.,
SCOUT DECK ANCHOR 3 1/4" BONDING SCREW
SCOUT DECK ANCHOR 16" 16" 1" X 4" ANCHOR BOLT (4) 10" 3 1/8" 5" 6" MIN COPPER WIRE TO ATTACH TO BONDING GRID 3 1/4" BONDING SCREW CONCRETE DECK SPECIFICATIONS: THE AQUA CREEK PRODUCTS' SCOUT DECK ANCHOR
VK/VP SERIES : Sealless Vertical Pump. Assembling Instructions 2010
VK/VP SERIES : Sealless Vertical Pump Assembling Instructions 2010 20610 Manhattan Place Suite 116 Torrance, CA 90501 Phone: 310-328-9114 Fax: 310-328-9441 1. Motor Shaft and Pump Base (1) (2) Place a
Thread Gages Tolerances
Class X Thread Gage s on Half-Angle of Thread ± N NN' on Major or Minor Diameter on Pitch Diameter Above Above /2 Dia. 4 Dia. Through Through 4 Dia. 8 Dia. s Above 8 Dia. Through 2 Dia. Threads per Inch
High Feed Indexable Milling Program Tools
High Feed Indexable Milling Program Tools With new five- and six-axis CNC grinding technology, Millstar has been able to create some of the most sophisticated and complex geometries in use today. With
IMPACT RING BIT SYSTEM Care & Maintenance Instructions
IMPACT RING BIT SYSTEM Care & Maintenance Instructions 646 Thompson Road Thompson, CT 06277 USA Phone: +1 (860) 923-9551 Fax: +1 (860) 923-2617 E-mail: numa@numahammers.com www.numahammers.com 2010 Numa
l DESCRIPTION l FEATURES l LIMITATIONS l TYPICAL APPLICATIONS l MATERIAL SPECIFICATIONS TECHNICAL MANUAL SECTION 2.3 PAGE 1 / 6
www.ucanfast.com TECHNICAL MANUAL SECTION 2.3 PAGE 1 / 6 l DESCRIPTION The UCAN WAG anchor is a fully threaded torque controlled expansion anchor assembled with a three segment expansion clip. All parts
Made in U.S.A. Narrow-U Bike Rack Heavy Duty Submittal Sheet. Materials: Finishes: Mount Options: Setbacks:
Submittal Sheet Materials: 2 Schedule 40 Steel Pipe (2.375 OD) Finishes: Galvanized An after fabrication hot dipped galvanized finish is available Powder Coat Our powder coat finish assures a high level
High-performance products. Designed for you! Airline Accessories
High-performance products. Designed for you! Airline Accessories Airline Accessories For over a century the name Chicago Pneumatic stands for innovative, highperformance tools and equipment, designed for
Injection mortar FIS VL
Injection mortar FIS VL The solid injection mortar for standard applications in cracked concrete and masonry High-bay warehouses BUILDING MATERIALS Approved for anchorings in: Concrete C20/25 to C50/60,
COMPFIRE CCFT-FP_550_55_ September 2010 Fin Plate Connection to Circular Concrete-Filled Tube Test Result
Reaction Frame Macalloy Bars Camera 3 Support Beam α Oven Bar Camera 2 Link Bar Camera 1 Tested Connection Jack Bar Electrical Furnace Reaction Frame Load Jack v2_5 April 2011 1 Oven Bar Link Bar View
Tripod Setup Guide (M-TPx)
Items needed: 1/2 inch wrench, mast level (M-MLA), medium size wire cutters, crescent wrench, all-purpose grease, tape measure, tie wraps, redi-mix cement (optional), shovel (optional), sledge hammer (for
Only. Gives You the TechLock. System Advantage ASSEMBLY, DISASSEMBLY AND TROUBLESHOOTING INSTRUCTIONS FOR 3000 SERIES FONTAINE
April 00 Only Gives You the TechLock System Advantage ASSEMBLY, DISASSEMBLY AND TROUBLESHOOTING INSTRUCTIONS FOR 000 SERIES FONTAINE C o n n e c t y o u r b u s i n e s s w i t h F O N T A I N E April
Cabinet Free Cover Rest Instructions
PART LIST 2 @ Cabinet Free Lifter Bracket 4 @ 1 5/16 Coupler Tube 2 @ 1-1/8 Bent Arm w/o Foam 2 @ 1-1/8 Bent Arm w/ Foam 2 @ 3/5 Black Tek Screw 2 @ Nylon Pivot Strap 1 @ Cover Saver Package 42 @ Black
BARRIER OFFSET 0" A 6" 6" A 12" 12" A 26" A 26" 3A OR 4A L OR S * ** L OR S L OR S
ACCEPTABLE (TCB) TYPES AND ANCHORING DETAILS BASED ON UNDERLYING SURFACE TYPE AND BARRIER OFFSET FROM DROP-OFF BARRIER OFFSET UNDERLYING SURFACE 0" A 6" 6" A 12" 12" A 26" A 26" TCB TYPE DETAIL TCB TYPE
Poppetted Coaxial Drop Tube Assembly for use with Auto Limiter II. Installation Instructions
Poppetted Coaxial Drop Tube Assembly for use with Auto Limiter II Installation Instructions Franklin Fueling Systems 3760 Marsh Rd. Madison, WI 53718 USA Tel: +1 608 838 8786 800 225 9787 Fax: +1 608 838
Type 967 Diamond Broaching Type 968 Sidewinder reamer shoe
Type 965 float collar Type 966 float shoe 1. GENERAL INFORMATION & RECOMMENDATIONS Type 967 Diamond Broaching Type 968 Sidewinder reamer shoe Type 969 Sidewinder reamer shoe Float Equipment Top-Co Float
TorqBolt Wedge Anchors Torque Controlled Expansion Anchor
TorqBolt Wedge Anchors Torque Controlled Expansion Anchor Product Description The Torqbolt wedge anchor is a torque-controlled, wedge expansion anchor for heavy duty fastening applications where high pull
5. STRUCTURAL ANALYSIS
5. STRUCTURAL ANALYSIS The skeletal structure of the experiment casing is constructed from UNISTRUT with all experiment equipment mounted by UNISTRUT provided fasteners. All maximum loads for nuts, bolts,
INDUSTRIAL FASTENERS. Only available in Australia at time of printing.
THREADED ROD 84 Sign up today for Konnect s new online store KonnectShop Available 24 hours a day, 7 days a week Buy online at any time via the easy to use Shopping Cart facility Browse & choose products
Cost effective. Smooth. Reliable. LOG Internal Hole Gripper
LOG Cost effective. Smooth. Reliable. LOG Internal Hole Gripper Light gripper made of very resistant polyamide with closed diaphragm system Field of Application Particularly suited to highly dynamic applications
AVIATION MAINTENANCE TECHNOLOGY REQUIRED TOOL LIST
AVIATION MAINTENANCE TECHNOLOGY REQUIRED TOOL LIST REVISED 9/1/17 (per AVM Student Handbook) Tools are not needed the first day of class but are required by the second semester of class. TOOLS Under our
T H E G E O R G E W H A L L E Y C O M P A N Y w w w. c o o l a n t f e d t o o l i n g. c o m
Solid Steel Stop Screw Note: When coolant-thru-the-tool is not necessary, these screws can also be used as a standard Backup or Adjusting Screw no. 101-001 855-001 3/4-16 L.H. 101-002 855-002 13/16-16
Ball valve HKSF-W100. Ball valve HKSF-W100. RMA Kehl GmbH & Co. KG Oststrasse 17 D Kehl / Germany
Ball valve HKSF-W100 RMA Kehl GmbH & Co. KG Oststrasse 17 D-77694 Kehl / Germany info@rma-kehl.de www.rma-armaturen.de 1 Design Features: RMA-ball valves type HKSF-W are fully welded and completely maintenance-free
SLIDING RAIL SYSTEM 208-580-1904 www.fishfighterproducts.com FFP sliding Rail system The FFP Sliding Rail system will allow you to easily adjust the location of your rod holders, tackle trays, or just
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW. Tel +44 (0)
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW Tel +44 (0)1254 615100 www.allspeeds.co.uk WIRE ROPE CUTTER RCO40LP PRODUCT CODE No. 980503 INSTRUCTIONS FOR
CIA-EA Technical Data Sheet
Description Our CIA-EA Epoxy Acrylate adhesive anchor system has been specially formulated as a high-performance, two component adhesive anchor system for threaded bars in uncracked concrete. Base Material
8-GUN CORVETTE ASSEMBLY INSTRUCTIONS
8-GUN CORVETTE ASSEMBLY INSTRUCTIONS THE HULL STEP 1 Fasten the Deck to the Hull. Find the hull. This is a large, pink, ship-shaped piece of insulating foam board. This will form the base of your model
Submittal / Substitution Request
Submittal / Substitution Request SUBMITTED TO: To: Firm: Project: Submitted Product: SIMPSON STRONG-TIE WEDGE-ALL WEDGE ANCHOR Specified Product: Section: Page: Detail/Sheet No.: Description of Application:
REPAIR PARTS MANUAL MODEL NO. EDITION 1 MFG. ID. NO Rotary Lawn Mower
REPAIR PARTS MANUAL MODEL NO. EDITION 1 MFG. ID. NO. 96141011700 Rotary Lawn Mower 532 40 27-08 Rev. 1 01.06.06 BY Printed in U.S.A. ROTARY LAWN MOWER - - MODEL NO. EDITION 1 (96141011700) - PRODUCT NO.
This document will provide detailed specifications, a bill of materials (BOM), and assembly instructions for the Official Competition Field.
This document will provide detailed specifications, a bill of materials (BOM), and assembly instructions for the Official Competition Field. Please note that this field utilizes the VEX IQ Challenge Field
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW. Tel +44 (0)
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW Tel +44 (0)1254 615100 www.allspeeds.co.uk WIRE ROPE CUTTER RCO40 PRODUCT CODE No. 980502 INSTRUCTIONS FOR INSTALLATION,
Plumbing Products FLOOR DRAIN CLEANOUT GATE VALVE BALL VALVE.
Plumbing Products FLOOR DRAIN CLEANOUT GATE VALVE BALL VALVE www.wilsontaylor.co INTRODUCTION Wilson Taylor Asia Pacific, headquartered in Singapore with a subsidiary based in Hong Kong and a representative