Daily coverage of the 2010 National Aeromodeling Championships July 22, 2010 Ron Barr. Sandy Frank photo. AMA s Flight Support Team.

Transcription

1 Inside: NatsNews Daily coverage of the 2010 National Aeromodeling Championships July 22, 2010 Thursday RC Aerobatics Saturday-Saturday RC Sailplane Ron Barr. Sandy Frank photo. Academy of Model Aeronautics International Aeromodeling Center, Muncie IN; Web site: e- mail: Copyright Academy of Model Aeronautics 2010 Editors: Liz Helms, Ashley Rauen, and Jennifer Orebaugh Staff Contributors: Michael Ramsey and Jay Smith A special thank-you to members of AMA s Flight Support Team. Our community partners recognize that AMA onsite events bring thousands of visitors during the flying season who spend dollars in our community. Their generous donations help AMA continue to host the many competition events held annually, and in turn, AMA promotes and encourages our members to look for and support members of the Flight Support Team.

2 RC precision aerobatics The third day: For the FAI pilots, the third day gets more intense. The field is pared down somewhat from days one and two and a new sequence, the F sequence, is flown. They are now flying in front of five judges, not the three they had on days one and two. Today will set the stage for the finals tomorrow. If the pilots have had anything in reserve from the four rounds of P-11, today is the time to go the extra distance. Half of today s pilots will not be flying tomorrow. Midairs: Our special thoughts are with the four pilots involved in midairs on Wednesday. It is a tribute to all of the Nats pilots watching how willing so many were to share when other pilots had a need for another airplane, offering even their own airplanes so the midaired pilots could still fly in the finals. You guys are great! Score 10s! Jim Quinn Thursday morning s flightline. Sandy Frank photo. Getting the last day of RC Precision Aerobatics started. Frank photo. Frank photo. 2

3 My first rc airplane my first rc airplane Take special notice of how young many of these pilots were when they started flying and how uninformed many were about aerobatic flying when they entered their first contests. Andrew Jesky: I was seven when I started flying RC with a Sig Senior three-channel airplane. I landed on my first flight without ever looking at the airplane. It was about 10 flights later when my instructor finally told me to look at the airplane. He thought I d get too scared if I looked at the airplane at first. Some years later Bob Kane asked if he could take me to a contest in Kentucky. I was flying a 4 Star 40. Although I didn t do all that great at that contest, I was hooked. My first Nats was in 2000 with my brother, Joseph s, USA Star. I came back the next two years with a Prophecy and won Advanced then Masters and you know the rest of the story. Photos by Jim Quinn. Danny Landis: I was five when I started flying RC with an Ugly Stick. It had a Rossi 61 with a tuned pipe. I sat on my dad s lap and my thumbs were on top of his, then on the sticks with his guidance, and finally I could fly on my own. I entered my first contest the next year in Shirley, Long Island, New York, and won. It was natural for me to fly since my dad, Richard, and his dad, Harvey, were also great RC pilots. I also fly the family Cessna 182 in which I soloed on my 16th birthday and got my ticket on my 17th birthday. I am currently a commercial and instrument rated pilot. I am a CFI and I have a seaplane rating. In RC I fly anything from my ½-ounce Playmate to a 40% Extra with a four-cylinder engine. When I am not flying my Passport or my Visa, I am flying UAVs for our military. I do the take offs and landings and someone else somewhere else actually does the bulk of the flying. Tony Frackowiak: I started with a Junior Falcon and a Golden Bee.049 engine. For $27.88 I purchased a Futaba system including the escapement! That first flight was most successful for the airplane; it flew perfectly. The radio, on the other hand, was a different story. I knew I should be pushing the button once for right and twice for left turns, but nothing happened. That first airplane never responded to even one radio command. It could still be flying some place, I never saw it again. My first successful flight was with a Falcon 56. I finished building a World Engines semi-kit, installed a K&B35 green head, and actually had control of this airplane so much so that I landed on my first flight and the engine was still running. In 1975 I went to a contest in Lockport, New York. I slept in the back of my pickup and woke up the next morning at the field, but there was no one there from that club. Finally another guy and I decided we d start flying ourselves about 9:00 when one of the club members came racing into the facility and promptly announced that no flying goes on here until 11:00. I did finish second at that contest. One of my all-time favorite aerobatic airplanes was my 1989 Fyg-Leaf biplane designed by Ken Bonnema. I won the Nats that year and went on to fly in the World Championships with that same airplane. I am very grateful for all I ve seen and all the places I ve been able to visit thanks to RC Aerobatics. I am so pleased to watch the development of the F3A airplanes. 3

4 Chip Hyde: For my fourth birthday my dad bought me a Lanier Slow Comet. In about a month I was able to take that airplane off with a World Engines single stick transmitter and an O.S..35 giving it the power. My dad would not let me fly on my own for a whole year until I turned five. That year I entered my first two contests and took first place in both. One of my all-time favorite airplanes after the Visa, of course was the Dalotal. It had one of the first soft mounts. I won the F3A Nats with that airplane in Jason Shulman: I started flying when I was seven and entered my first contest that same year. My first landing at that contest was probably a half-mile away. I had thousands of flights on that Top Flight Head Master. Of course, my dad taught me to fly RC, even though his earliest success came as a Control Line pilot. I was lucky that my grandfather was working for Top Flight at the time because it seemed like we would go through box after box of those wooden props. My dad finally decided it was time I learned to change my own props, which actually helped me learn how to land better and not break so many. Arch Stafford: I was four-and-a-half when I flew my Ace Alpha, a three-channel airplane with a Cox.09 and an Ace Silver Seven singlestick radio. My dad taught me and since there was no buddy box back then, he had to kneel behind me for assistance. I flew my first contest with a Great Planes Cherokee when I was 10. I came in sixth out of 15 in Novice. I have another Cherokee now and my son will fly his first contest using the new ARF version of the Cherokee. Later I was flying a Viper with a 1.20 powerhouse. My first Nats was in 1998, but I was plagued by radio problems, especially when I lost an elevator servo. I had over 2,200 flights on my Black Magic VF3 when I recently retired it. It had to be one of my best and favorite airplanes of all time. Brett Wickizer: I started at the age of nine with an LT 40 that my dad built. It crashed so often that the fuselage looked like it came out of a pretzel factory. I never actually got to solo that LT 40. I finally soloed on an Advanced 40. One of my favorite airplanes in those years was the Balsa Nove 40. I flew some 3-D and some big airplanes, but I always knew I needed to be in Pattern if my flying was to improve. Thanks to people like Don Ramsey I was inspired to try F3A Precision Aerobatics and knew I was where I belonged. Brett s dad, Mike, is his biggest supporter. Mike likened it to, If I owned a race horse I d need to find a jockey. If you ve ever seen Brett fly you know Mike found the right jockey! 4

5 Jerry Budd: I was living in a small town of 900 in Nebraska when I was 13. All I could do was to read about radio control in magazines and dream about it. Finally, I got an Ace RC Dick s Dream. It started with a PeeWee.020, but as it gained weight from less graceful landings, I finally changed the engine to a Golden Bee.049. I would play a round of golf and then fly the RC airplane at that same golf course. We formed an RC club with three people and our local grocery story became a Sig dealer with one shelf of his store dedicated to RC modeling. I had a Sig Cadet and a Cougar with a.45 and a tuned pipe. The 1979 Nats was in Lincoln, Nebraska, so I went. I had never seen a contest before, nor had I ever seen a Pattern airplane. I built a Skyglass Vertigo II with an O.S..60 and Goldbeg retracts. That plane took off, climbed to altitude, leveled off, and continued straight. It was perfectly trimmed and so it could have flown for miles. I never saw it again. I was so excited to see the actual people whom I had only seen before in pictures in magazines. At the pilots meeting at that Nats I asked Dave Brown the question about rolling first or starting high to do an outside loop. Dave said it was rolling first, according to the rule book. As a college student at the time, I had memorized the rule book and so I told Dave it was not in the rule book. A discussion ensued until no one could find any mention o how to start the outside loop in the rule book anywhere. Since I didn t have the maneuvers memorized, one of the other pilots asked if I would like him to stand behind me and call the maneuvers loudly enough for the judges to hear. Normally the pilot would do this himself. I said I would like the help and that started a two-year discussion as to whether or not a pilot can have a caller. I started building soft mounts in 1988 to fill a need in the RC community. That next year I sold more than $4,000 worth of material in Toledo and later Sullivan bought me out. With the advent of the Internet I have been able to get back onto offering a few products online to customers all over the world. George Asteris: I was in my 30s when I started to fly. My first RC airplane was a Falcon 56. I had to teach myself how to fly since there was no one around who knew any more than I did about flying RC. Needless to say there were a few crashes in those early days. Finally, there was a place for RC pilots to fly, but it was over an hour away from my house. It was there that I met the young, 18-year-old Andre Bouchard. It only took that first four point roll that he did so well to get me hooked. I built and flew a Kaos and then a Dirty Birdie, but by the 1980s I was designing and building my own airplanes. There are still some Omens that I designed flying today. One great flying day I was having such a good time flying my Falcon 56 I forgot about the time and it ran out of fuel. It was also down wind at the time (where else?) and so it landed away from the school yard where I was flying. I finally found it in someone s back yard next to a lawn mower. As I began to retrieve my airplane a man came out of the house and ordered me not to touch the airplane because it almost hit him. He was going back inside to call the police. As he went inside, I grabbed that airplane and ran as fast as I could. Wednesday s judges hard at work. 5

6 Stephen Byrd: I attended my first Nats when I was six weeks old. I can t tell you much about that year. I started flying when I was four. During a fight I would see something else that interested me so I would put the transmitter down and walk away. One of my older brothers or my dad would have to scramble to get the transmitter and recover the airplane while I wandered off on some new adventure. I still own that Cadet Senior and intend to start teaching my son to fly using the same airplane. Luckily for me my dad owned a hobby shop in Fort Worth, Texas, for more than 15 years. My first Pattern airplane was a Kaos. I flew at Todd Blose s contest in Waco when I was 10. The Shazham remains one of my favorite airplanes of all time. My first Nats was in 2002 where I flew Intermediate. David Snow: I was 10 and the airplane was a Falcon 56 with ailerons. I learned to land first and take off second. My dad and I were learning together, but my dad was a little ahead of me. So he would take off my airplane and then go fly his own. When it was time for me to land he would land first and then come and help me land. I went to my first contest in 1980, but had a crash due to a radio failure. I flew a Typo in the 1985 Nats in Westover, Massachusetts. I came in first in my first Nats. I won Masters in I have Nats trophies ranging from first to sixth. I was a judge for the 1989 team selection when one of the pilots was Tony Frackoviak. Riley Kissenberth: It took me a long time to save $500 but I was able to by my first RC airplane at the age of 10. It was a complete package including transmitter and receiver. I landed on that first flight, but only took off for the first time on my second flight. I was flying an Extreme Flight Yak 50cc which got me hooked on Aerobatics. I wanted something more precise so my dad and I settled on an Integral. I just got a Spark, but need more time to grove it in before I start flying it at contests. I am also very interested in F3P. I ve flown in the last two Electric Tournament of Champions contests. I really want to excel in flying. I also have a glider solo and I am flying a Cessna 172. I hope to be a commercial pilot and fly for some company like Fed Ex. Joseph Szczur: I started when I was 5 with an Alpha 40. I did more flying on the simulator and then my dad taught me using a buddy cord. I was flying at the Farm Club contest when the wings folded on that Alpha and we never found the fuselage. I flew in the 2008 Nats in Intermediate. In 2009 I flew FAI with an Angel S and this year I am flying Advanced with my dad s Passport. 6

7 Scores and Standings Please note: Scores are unofficial until tabulation is confirmed. 7

8 Sandy Frank photo.