Technical information for hinges
|
|
- Alexander Hall
- 5 years ago
- Views:
Transcription
1 451
2 452
3 Technical information for hinges In the tables on the following pages are listed a large range of hinge variations. Many more variations are possible if hinges with guide tabs are required i.e. when combining aluminium profiles with different slot widths. Guide tabs Many hinges can be supplied on request with guide tabs for the slots of aluminium profiles. They secure the hinge against twisting and make it stronger. The hinges are designed in such a way that the guide tabs can simply be broken out with a screwdriver. without guide tabs Left and right hinge Each lift-off hinge has a left and right version, before ordering it should be known on which side the door or hatch is to be mounted. Left hinge. The left hinge half is fixed. The hatch or door opens from right to left. with guide tabs for aluminium profiles with slot Right hinge. The right hinge half is fixed. The hatch or door opens from left to right. Tip If you want to fit a door or hatch so that it cannot be lifted off, you can still use a left and right lift-off hinge. The two hinges are fitted in the end position and secure each other mutually. Fixed hinge. The hinge is non-liftoff. It is suitable for opening left or right. 453
4 K0434 plastic, lift-off, left D3 D2 H 40 D1 Fibreglass reinforced thermoplastic. Hinge pin stainless steel. Hinge black. Pin bright. B2 B1 K All hinges can be supplied on request with guide tabs for the slots of aluminium profiles (slots 6, 8 and 10). They facilitate mounting, secure the hinge against twisting and make it stronger. KIPP plastic, lift-off, left Order No. B1 B2 D1 D2 D3 H max. max. kn kn 454 K , ,625 0,425 K , , , ,7 0,5 K , , ,7 0,4 K , , , ,8 0,35 K , , ,8 0,325 K , , , ,8 0,32 K , , , ,8 0,24 K , , , ,75 0,45 K ,5 17,5 29,5 29, , ,75 0,5 K , ,5 35, , ,75 0,4 K ,5 22,5 29,5 38, , ,8 0,35 K , ,5 43, , ,8 0,35 K ,5 27,5 29,5 48, , ,8 0,35 K ,5 32,5 29,5 57, , ,8 0,24 K , , ,75 0,4 K ,5 35,5 29, , ,75 0,5 K ,5 35, , ,75 0,4 K ,5 35,5 38, , ,8 0,35 K ,5 43, , ,8 0,35 K ,5 35,5 48, , ,9 0,35 K ,5 35,5 57, , ,8 0,24
5 K0434 plastic, lift-off, left KIPP plastic, lift-off, left Order No. B1 B2 D1 D2 D3 H max. max. kn kn K , , , ,65 0,425 K ,5 17,5 38,5 29, , ,75 0,5 K , ,5 35, , ,75 0,4 K ,5 22,5 38,5 38, , ,8 0,4 K , ,5 43, , ,8 0,35 K ,5 27,5 38,5 48, , ,8 0,35 K ,5 32,5 38,5 57, , ,8 0,24 K , , ,65 0,425 K ,5 43,5 29, , ,75 0,5 K ,5 35, , ,7 0,4 K ,5 43,5 38, , ,8 0,35 K ,5 43, , ,8 0,325 K ,5 43,5 48, , ,8 0,32 K ,5 43,5 57, , ,8 0,24 K , , , ,65 0,425 K ,5 17,5 48,5 29, , ,75 0,5 K , ,5 35, , ,7 0,4 K ,5 22,5 48,5 38, , ,8 0,35 K , ,5 43, , ,8 0,325 K ,5 27,5 48,5 48, , ,8 0,32 K ,5 32,5 48,5 57, , ,8 0,24 K , , , ,65 0,425 K ,5 17,5 57,5 29, , ,75 0,5 K , ,5 35, , ,7 0,4 K ,5 22,5 57,5 38, , ,8 0,35 K , ,5 43, , ,8 0,325 K ,5 27,5 57,5 48, , ,9 0,32 K ,5 32,5 57,5 57, , ,9 0,24 455
6 K0434 plastic, lift-off, right D2 D3 H 40 D1 Fibreglass reinforced thermoplastic. Hinge pin stainless steel. B2 B1 Hinge black. Pin bright. K All hinges can be supplied on request with guide tabs for the slots of aluminium profiles (slots 6, 8 and 10). They facilitate mounting, secure the hinge against twisting and make it stronger. KIPP plastic, lift-off, right Order No. B1 B2 D1 D2 D3 H max. max. kn kn 456 K , ,625 0,425 K , , , ,7 0,5 K , , ,7 0,4 K , , , ,8 0,35 K , , ,8 0,325 K , , , ,8 0,32 K , , , ,8 0,24 K , , , ,75 0,45 K ,5 17,5 29,5 29, , ,75 0,5 K , ,5 35, , ,7 0,4 K ,5 22,5 29,5 38, , ,8 0,35 K , ,5 43, , ,8 0,35 K ,5 27,5 29,5 48, , ,8 0,35 K ,5 32,5 29,5 57, , ,8 0,24 K , , ,7 0,4 K ,5 35,5 29, , ,75 0,5 K ,5 35, , ,75 0,4 K ,5 35,5 38, , ,8 0,35 K ,5 43, , ,8 0,35 K ,5 35,5 48, , ,8 0,35 K ,5 35,5 57, , ,8 0,24 K , , , ,65 0,425 K ,5 17,5 38,5 29, , ,75 0,5 K , ,5 35, , ,75 0,4
7 K0434 plastic, lift-off, right KIPP plastic, lift-off, right Order No. B1 B2 D1 D2 D3 H max. max. kn kn K ,5 22,5 38,5 38, , ,8 0,35 K , ,5 43, , ,8 0,35 K ,5 27,5 38,5 48, , ,8 0,35 K ,5 32,5 38,5 57, , ,8 0,24 K , , ,65 0,425 K ,5 43,5 29, , ,75 0,5 K ,5 35, , ,7 0,4 K ,5 43,5 38, , ,8 0,35 K ,5 43, , ,8 0,325 K ,5 43,5 48, , ,8 0,32 K ,5 43,5 57, , ,8 0,24 K , , , ,65 0,425 K ,5 17,5 48,5 29, , ,75 0,5 K , ,5 35, , ,7 0,4 K ,5 22,5 48,5 38, , ,8 0,35 K , ,5 43, , ,8 0,325 K ,5 27,5 48,5 48, , ,8 0,32 K ,5 32,5 48,5 57, , ,8 0,24 K , , , ,65 0,425 K ,5 17,5 57,5 29, , ,75 0,5 K , ,5 35, , ,7 0,4 K ,5 22,5 57,5 38, , ,8 0,35 K , ,5 43, , ,8 0,325 K ,5 27,5 57,5 48, , ,9 0,32 K ,5 32,5 57,5 57, , ,9 0,24 457
8 K0435 plastic D2 D3 H 40 D1 Fibreglass reinforced thermoplastic. Hinge pin stainless steel. B2 B1 Hinge black. Pin bright. K KIPP plastic Unequal leaf hinges can be mounted left or right. All hinges can be supplied on request with guide tabs for the slots of aluminium profiles (slots 6, 8 and 10). They facilitate mounting, secure the hinge against twisting and make it stronger. Order No. B1 B2 D1 D2 D3 H max. max. kn kn 458 K ,5 11,5 19,5 19, , ,5 0,4 0,2 K , ,625 0,425 K , , , ,7 0,5 K , , ,7 0,4 K , , , ,8 0,35 K , , ,8 0,325 K , , , ,8 0,32 K , , , ,8 0,24 K ,5 17,5 29,5 29, , ,7 0,4 K , ,5 35, , ,7 0,4 K ,5 22,5 29,5 38, , ,75 0,45 K , ,5 43, , ,75 0,45 K ,5 27,5 29,5 48, , ,9 0,425 K ,5 32,5 29,5 57, , ,85 0,2 K ,5 35, , ,7 0,4 K ,5 35,5 38, , ,75 0,45 K ,5 43, , ,75 0,45 K ,5 35,5 48, , ,8 0,425 K ,5 35,5 57, , ,8 0,175 K ,5 22,5 38,5 38, , ,75 0,45 K , ,5 43, , ,75 0,45 K ,5 27,5 38,5 48, , ,8 0,425 K ,5 32,5 38,5 57, , ,85 0,175 K ,5 43, , ,75 0,45 K ,5 43,5 48, , ,8 0,425 K ,5 43,5 57, , ,85 0,2 K ,5 27,5 48,5 48, , ,8 0,425 K ,5 32,5 48,5 57, , ,85 0,2 K ,5 32,5 57,5 57, , ,85 0,175
9 K0436 plastic, with locking lever Hinge and lever fibreglass reinforced thermoplastic. Hinge pin steel. Mechanism steel Ø 6,6 40 Hinge black. Pin galvanized. Locking lever black. Mechanism black galvanized. K ,5 The indexable lever allows the hinge to be locked in any position On request: with guide tabs (slot 6, 8 and 10) for aluminium profiles. Unequal leaf combinations. KIPP plastic with locking lever Order No. max. max. kn kn K ,5 0,38 K ,5 17,5 29,5 29,5 0,7 0,4 K ,7 0,4 K ,5 22,5 38,5 38,5 0,75 0,45 K ,5 43,5 0,75 0,45 K ,5 27,5 48,5 48,5 0,8 0,425 K ,5 32,5 57,5 57,5 0,85 0,
10 K0437 plastic, with elongated holes Fibreglass reinforced thermoplastic. Hinge pin stainless steel ,3 Hinge black. Pin bright K Elongated holes allow easy horizontal adjustment. 6, ,5 65 KIPP Hinge plastic, with elongated holes Order No. max. max. kn kn 460 K ,5 0,3
11 K0438 plastic, lift-off, with guide tabs 15 Fibreglass reinforced thermoplastic. Hinge pin stainless steel. Washer thermoplastic. guide tab for 8 mm slot 32 7,5 Ø 6,4 50 Hinge and washer black. Pin bright. K The guide tabs permit the hinges to be mounted in slots (8 mm) washer KIPP, plastic, lift-off, with guide tabs Order No. Version max. max. kn kn K left hand 0,2 0,1 K right hand 0,2 0,1 461
12 85 K0439 plastic, detent 20 10,5 guide tab for slot 10,2 3 8 Hinge and caps fibreglass reinforced PA thermoplastic. Hinge pin stainless steel. Hinge and caps black. Pin bright. Ø6,4 K These hinges have a detent mechanism. This mechanism holds a door or lid open at three different angles or tightly closed. The hinges are available with or without guide tabs for aluminium profile slots. indexed positions KIPP plastic, detent Order No. Guide tabs max. max. for slot kn kn 462 K ,75 17, ,4 0,35 K ,75 17, ,4 0,35 K ,75 17, ,4 0,35 K ,75 22,75 36,75 36,75-0,6 0,425 K ,75 22,75 36,75 36,75 8 0,6 0,425 K ,75 22,75 36,75 36, ,6 0,425
13 K0440 plastic, with adjustable friction 20 SW 4 10,5 8 Hinge and caps, fibreglass reinforced PA thermoplastic. Metal parts stainless steel. guide tab for slot 3 Hinge and caps black. Metal parts bright. 10,2 K Ø6, These friction hinges allow doors or lids to remain open in any position. A set screw allows the amount of friction to be infinitely adjusted between 0-5 Nm. The hinges are available with or without guide tabs for aluminium profile slots. 90 KIPP plastic, with adjustable friction Order No. Guide tabs max. max. for slot kn kn K ,75 17, ,4 0,325 K ,75 17, ,4 0,325 K ,75 17, ,4 0,325 K ,75 22,75 36,75 36,75-0,6 0,425 K ,75 22,75 36,75 36,75 8 0,6 0,425 K ,75 22,75 36,75 36, ,6 0,
14 K1004 plastic with fastening holes D2 D3 Fibreglass reinforced thermoplastic. Hinge pin steel. D1 H 45 Hinge black. Hinge pin galvanised. K Hinge with fastening holes for countersunk screw DIN 7991/UNI B2 B1 KIPP Plastic hinges with fastening holes Order No. B1 B2 D1 D2 D3 H (N) (N) 464 K , K , , K , K ,5 31, , K ,5 31, ,
15 K1005 plastic with bushing D2 D3 Fibreglass reinforced thermoplastic. Hinge pin steel. Bushes brass. D1 T B2 B1 H 45 Hinge black. Hinge pin galvanised. K KIPP, plastic, with bushing Order No. B1 B2 D1 D2 D3 H T (N) (N) K M , K M , K M K M K ,5 31,5 47,5 47, M K ,5 31,5 47,5 47, M
16 K1006 plastic with fastening screws D3 Fibreglass reinforced thermoplastic. Hinge pin steel. D2 D1 L B2 B1 H 45 Hinge black. Hinge pin galvanised. K KIPP, plastic, with fastening screws Order No. B1 B2 D1 D2 D3 H L (N) (N) 466 K M , K M , K M K M K ,5 31,5 47,5 47, M K ,5 31,5 47,5 47, M
17 K1007 plastic with bushes and fastening screws D2 D3 Fibreglass reinforced thermoplastic. Hinge pin steel. Bushes brass. T D1 D4 L B2 B1 H 45 Hinge black. Hinge pin galvanised. K KIPP plastic with bushes and fastening screws Order No. B1 B2 D1 D2 D3 D4 H L T (N) (N) K M M5 10, K M M6 10, K M M K M M K ,5 31,5 47,5 47, M M K ,5 31,5 47,5 47, M M
18 K0441 die-cast zinc, with elongated holes 8,3 8,3 4,5 1, washer Die-cast zinc. Hinge pin stainless steel. Washer thermoplastic. Hinge black powder-coated. Pin bright. Washer black. K Elongated holes allow easy horizontal adjustment KIPP die-cast zinc, with elongated holes Order No. Guide tabs max. max. for slot kn kn 468 K ,2 0,5 K ,2 0,5 K ,2 0,5
19 K0442 die-cast zinc, with locking lever Ø8,2 Hinge die-cast zinc. Hinge pin steel. Lever fibreglass reinforced thermoplastic. Mechanism steel ,5 guide tab for slot 8 Hinge black powder-coated. Pin galvanized. Lever black. Mechanism black galvanized. K ,1 21 The indexable lever allows the hinge to be locked in any position. Available with or without guide tabs for aluminium profile slots. 74 KIPP die-cast zinc, with locking lever Order No. Guide tabs max. max. for slot kn kn K ,5 22,5-1,5 0,65 K ,5 22,5 8 1,5 0,65 K ,5 22,5 10 1,5 0,65 K ,5 25-1,5 0,65 K , ,5 0,65 K , ,5 0,65 K ,5 0,65 K ,5 0,65 K ,5 0,65 469
20 K0579 aluminium, lift-off, left Die-cast aluminium. Hinge pin stainless steel. Ø Hinge matt nickel-plated. Pin bright. Ø 6,6 K for panel elements and aluminium profiles. The hinges can be fitted with a plastic spacer ring on the hinge pin On request: with guide tabs for aluminium profiles (slots 5, 6, 8, 10, 12 and 14). Unequal leaf combinations. KIPP aluminium, lift-off, left Order No. max. max. kn kn 470 K ,41 0,25 K ,5 17,5 29,5 29,5 0,45 0,28 K ,5 0,25 K ,5 22,5 38,5 38,5 0,55 0,2 K ,5 43,5 0,55 0,2 K ,5 27,5 48,5 48,5 0,55 0,175 K ,5 32,5 57,5 57,5 0,575 0,15
21 K0579 aluminium, lift-off, right Die-cast aluminium. Hinge pin stainless steel. Ø Hinge matt nickel-plated. Pin bright. Ø 6,6 K for panel elements and aluminium profiles. The hinges can be fitted with a plastic spacer ring on the hinge pin On request: with guide tabs for aluminium profiles (slots 5, 6, 8, 10, 12 and 14). Unequal leaf combinations. KIPP aluminium, lift-off, right Order No. max. max. kn kn K ,41 0,25 K ,5 17,5 29,5 29,5 0,45 0,28 K ,5 0,25 K ,5 22,5 38,5 38,5 0,55 0,2 K ,5 43,5 0,55 0,2 K ,5 27,5 48,5 48,5 0,55 0,175 K ,5 32,5 57,5 57,5 0,575 0,15 471
22 K0580 aluminium Die-cast aluminium. Hinge pin stainless steel. Ø 6 Ø 14 9 Hinge matt nickel-plated. Pin bright. Ø 6,6 40 K for panel elements and aluminium profiles, non lift-off. The hinges can be fitted with a plastic spacer on the hinge pin On request: with guide tabs for aluminium profiles (slots 5, 6, 8, 10, 12 and 14). Unequal leaf combinations. KIPP aluminium Order No. max. max. kn kn 472 K ,275 0,215 K ,5 17,5 29,5 29,5 0,325 0,225 K ,325 0,225 K ,5 22,5 38,5 38,5 0,4 0,25 K ,5 43,5 0,4 0,25 K ,5 27,5 48,5 48,5 0,4 0,25 K ,5 32,5 57,5 57,5 0,4 0,1
23 K1084 stainless steel Ø 14 15, Ø 6,6 Stainless steel Polished K for panel elements and aluminium profiles. KIPP stainless steel Order No. max. max. kn kn K ,7 0,560 K ,5 17,5 29,5 29,5 0,8 0,575 K ,5 22,5 38,5 38,5 0,9 0,675 K ,5 42,5 0,9 0,675 K ,5 32,5 56,5 56,5 0,9 0,
24 K1085 stainless steel Stainless steel Polished or blasted. H1 H K D1 90 with fixed pin and countersunk holes. A B1 B2 KIPP, stainless steel Order No. Version A B1 B2 D1 H H1 474 K polished 39 12,5 12,5 19,5 19, ,5 4 9 K sand-blasted 39 12,5 12,5 19,5 19, ,5 4 9 K polished , K sand-blasted , K polished , K sand-blasted ,5 8 15
25 K1082 steel or stainless steel plate Steel or stainless steel S Steel galvanized. Stainless steel bright. 1: 90 K B1 B2 D Rolled plate butt hinges. Pins are riveted. Screw holes countersunk. B3 A5 ±1 2: B3 B1 B2 B2 A6 ±2 KIPP, steel or stainless steel plate Order No. Material Version A5 A6 B1 B2 B3 D S K steel 1 8,5 8, ,5 4 1 K steel ,5 7,5 4,5 1,5 K stainless steel 1 8,5 8, ,5 4 1 K stainless steel ,5 1,25 K stainless steel ,5 7,5 4,5 1,5 K stainless steel 2 35,3 35, ,2 1,5 475
26 K0985 weldable stainless steel D L Stainless steel B D1 Bright. K The hinges are made of weldable profile steel. In the lower part of the hinge, the pin is fixed in place. The differing steel qualities of the weld and the beam onto which the hinge is welded must be at least equal to or better than: S235 JR+AR acc. to EN : DIN 8563 part 3 or Fe E 235 acc. to SIA 161 KIPP weldable, stainless steel Order No. D D1 B L 476 K K ,5 80 K K K ,5 150 K ,5 180
27 Notes 477
28 K0984 weldable Form A L Hinge steel. Spacer washer brass. Hinge pin steel or brass. Grease nipple DIN D, galvanized steel. Steel parts, bright. K B D D1 Form B L The hinges are made of weldable profile steel. In the lower part of the hinge, the pin is fixed in place. The differing steel qualities of the weld and the beam onto which the hinge is welded must be at least equal to or better than: S235 JR+AR acc. to EN : DIN 8563 part 3 or Fe E 235 acc. to SIA
29 K0984 weldable KIPP weldable Order No. Form Material D D1 L B K A hinge pin steel ,7 K A hinge pin steel ,7 K A hinge pin steel ,7 K A hinge pin steel K A hinge pin steel ,5 K A hinge pin steel K A hinge pin steel K A hinge pin steel K A hinge pin steel K A hinge pin steel K A hinge pin steel ,5 K A hinge pin brass ,7 K A hinge pin brass ,7 K A hinge pin brass ,7 K A hinge pin brass K A hinge pin brass ,5 K A hinge pin brass K A hinge pin brass K A hinge pin brass K A hinge pin brass K A hinge pin brass K A hinge pin brass ,5 K B hinge pin steel K B hinge pin steel K B hinge pin steel K B hinge pin steel ,5 K B hinge pin steel ,5 K B hinge pin steel K B hinge pin steel
30 480
K13.12 FACE FIXED PANIC EXIT DEVICE K13 DOORS
K13 DOORS K13.12 FACE FIXED PANIC EXIT DEVICE 01.03.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Base set n
More informationTapped Hole (.375) Tapped hole 15 (.594) (.391±.004) Frame 19±0.2 (.750±.008) 12.7±0.2 (.500±.008) 19±0.2 (.750±.008) R S 4 x Ø 5.4 (.
434 Lift-off In-line Zinc can also be 31.5 19.1 (.750) For Lift-Off For on Lift-Off 1300 (300 lbf) 2200 (500 lbf) 56 T.P.I. (2.21) 31.5 19.1 (.750) Tapped hole Ø 9.5 (.375) ultimate 3300 (750 lbf) 9300
More informationOCEAN - Wellness Line
147 Modern and functional: The range for shower and sauna doors. CONTENTS Technical details 1-151 Materials and surface finishes 152 Product information Shower hinges 153 Connectors and shower door knobs
More informationSELF DRILLING/TAPPING SCREWS
Teks Self Drilling Screws A premium range of high performance self drilling fasteners from the originators of the Teks brand, these screws are available with full technical and after sales support. Consisting
More informationAccessories. Finger Guards 134. Filter Guards grille 139. Accessories 140. Technology. DC Axial Fans. DC Radial Fans. Specials.
13 Technology Finger Guards 134 Filter Guards grille 139 140 Specials DC Axial Fans DC Radial Fans Everything that you need for your fan. ebm-papst provides an extensive range of accessories for optimum
More informationPCB accessories. PCB handle C. PCB retainer C. Order Information. Note. Order Information
PCB accessories PCB handle C PCB accessoriesmain CataloguePart number in bold face type: ready for despatch within 2 working dayspart number in normal type: ready for despatch within 0 working days For
More informationDICTATOR "DIREKT" Gate Closer
DICTATOR "DIREKT" Gate Closer For Access Gates in Boundary Fences The DICTATOR gate closer DIREKT is the economic solution for the reliable and controlled closing of outside gates, such as admission gates
More informationCFSW. Hinges with built-in safety multiple switch
CFSW. Hinges with built-in safety multiple switch ELESA Original design Elesa Standards Main dimensions Fitting Weight Code Description L B f ±0.2 f 1 ±0.2 H h 1 h 2 d 3 d 4 C [Nm]# g 426601 CFSW.110-6-2NO+2NC-C-A
More informationBike holder with three-point-support for mounting stand
Bike holder with three-point-support for mounting stand Ref.no. 589 4726 Translation of the original manual Issued: 07 / 2010 Keep this manual for future reference! Manufacturer: Weilnhammer Maschinenbau
More informationK0709 Quick-fit couplings
Joints 1067 K0709 Quick-fit couplings with radial offset compensation external thread D1 SW SW1 application example: X max. D D 3 4 internal thread SW 3 4 2 SW1 D D Coupling part and claw in steel. Nut
More informationbuilt build to TRENCHLINING DOWN A CAISSON
uilt build to TRENCHLINING DOWN A CAISSON TRENCHLINING Trenchlining_DOWN A CAISSON DOWN A CAISSON CHARACTERISTICS Base panel 315x230 (815 kg) and 415x230 (1018 kg). Super-elevation panel 315x120 (511
More informationPRODUCT CARD WALL MOUNTED FIXED BASKETBALL CONSTRUCTION PROJECTION: FROM 1,00 TO 2,25 M
PRODUCT CARD WALL MOUNTED FIXED BASKETBALL CONSTRUCTION PROJECTION: FROM 1,00 TO 2,25 M I. List of components... 2 II. Complimentary products... 2 III. Product description... 3 IV. Product Purpose... 3
More informationenclosures to ATEX and enclosures for special custom design (EEx p and NEMA cabinets)
enclosures to ATEX and enclosures for special custom design (EEx p and NEMA cabinets) Stainless steel and plastic enclosures for use in potentially explosive environments R Rittal system partners Perfect
More informationPRODUCT CARD WALL MOUNTED SIDE FOLDED BASKETBALL CONSTRUCTION PROJECTION: FROM 1,2 TO 2,45 M
PRODUCT CARD WALL MOUNTED SIDE FOLDED BASKETBALL CONSTRUCTION PROJECTION: FROM 1,2 TO 2,45 M I. List of components... 2 II. Complimentary products... 2 III. Product description... 3 IV. Product Purpose...
More informationBourdon tube pressure gauges for chemical applications EN 837-1
Application For aggressive gaseous and liquid media which are not highly viscous and do not crystallize. Suitable for use in corrosive atmospheres.! When measuring gas or vapour, the instruments must be
More informationBourdon tube pressure gauges with glycerine filling, for chemical applications EN 837-1
Application For aggressive gaseous and liquid media which are not highly viscous and do not crystallize. Suitable for use in corrosive atmospheres. For measurement in areas subject to high vibration levels
More informationDICTATOR "DIREKT" Gate Closer
DICTATOR "DIREKT" Gate Closer For Access Gates in Boundary Fences The DICTATOR gate closer DIREKT is the economic solution for the controlled closing of outside gates, such as admission gates to kinder
More informationForestay fittings and halyard routing
Festay fittings and halyard routing Cutter stay on masthead rigs On fractional rigs the festay fitting is either fitted directly on to the mast combined with the halyard box (Seldén combi boxes). The festay
More information10.2. Basketball Single Post System
Basketball Basketball Single Post System The single-post basketball stand is made with oval aluminium profiles with a cross-section of 120 x 100 mm. The wall thickness of this robust apparatus is 4 to
More informationOrder No Projection Backboard
Basketball Basketball Single Post System The single-post basketball stand is made with oval aluminium profiles with a cross-section of 120 x 100 mm. The wall thickness of this robust apparatus is 4 to
More informationIt allows you to. is the Best Option. More information at
Document - 17AIO Launch and Retrieve by yourself without getting your partner wet Copyright C Release & Retrieve Boat Latch Pty Ltd, 2016 and "L-&-R" is a Trademark of Release & Retrieve Boat Latch Pty
More informationCFSW. Hinges with built-in safety multiple switch
CFSW. Hinges with built-in safety multiple switch ELESA Original design technical informations Material - Hinge body: self-extinguish high-rigidity SUPER-technopolymer, black colour. Resistant to solvents,
More informationType 4708 Supply Pressure Regulator
Type 478 Pressure Regulator Application pressure regulators used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to. bar ( to 4 psi). to bar (8 to 9 psi)
More informationDirectional Control Valves Series VA13 and VA15 3- and 5-port valves, G1/8
Directional Control Valves Series VA13 and VA15 3- and 5-port valves, G1/8 Catalogue 9127003472GB-ul VA13 and VA15 Directional Control Valves Robust 3- and 5-port valves with brass bodies and stainless
More informationParts Manual. Scraper Hitches PH:
Parts Manual Scraper Hitches 12-18 1 Table of Contents A123299 Swivel Hitch 3 A1063527 Super Swivel Hitch 4 A125056 Yoke Hitch 5 A125057 Super Capacity Hitch 6 A125223 MDU Hitch 7 A123224 360 Swivel Hitch
More informationenclosures to ATEX and enclosures for special custom design (EEx p and NEMA cabinets)
lri030784900.eps lri031083400.eps enclosures to ATEX and enclosures for special custom design (EEx p and NEMA cabinets) fri040466500.eps Stainless steel and plastic enclosures for use in potentially explosive
More informationType 4708 Supply Pressure Regulator
Type 478 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to.6 bar ( to 4 psi) or. to 6 bar (8 to
More informationWELL COMPLETION & PROTECTION. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD
WELL COMPLETION & PROTECTION MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com WELL COMPLETION & PROTECTION TABLE OF CONTENTS TABLE OF CONTENTS (FLUSHMOUNTS)... 2-5 MONITORING
More informationRTA Series 1 4 Poles Coded Rotary Switches
1 4 Poles oded Switches Features/Benefits PB or hand soldering versions Bushing mounting Multiple poles Decimal and hexadecimal codes Screwdriver slot or extended actuator RoHS ompliant Typical Applications
More informationExtension Platform. Base Platform. Crossover. Exit railing. Exit Railing
Base Platform Galvanized With metal grate and two brackets Railing on the long side and a face side Extension Platform Galvanized With metal grate and one bracket Railing on the long side with rail connection
More informationRTA Series 1 4 Poles Coded Rotary Switches
1 4 Poles oded Switches Features/Benefits PB or hand soldering versions Bushing mounting Multiple poles Decimal and hexadecimal codes Screwdriver slot or extended actuator RoHS ompliant Typical Applications
More informationDescription Pressure range Connection thread Device Page
Pressure Regulator Pressure range onnection thread Device Page max. 22 l/min miniature -850 0 mbar 1 8 NPT V800.02 max. 22 l/min miniature -850 0 mbar 10-32 and flange V900.02 max. 0 l/min precise -1 +0,.4
More informationIntroduction. P r otective Seals Panel seal for One Hole Mounting (OHM) O-Ring seals for panel mounting Switch boots
SECTION F Introduction ACCESSORIES Switch Guar d s Prevent accidental operation of switches Switch operation limited to selected functions Adaptable to one, two and four pole config u r a t i o n s One
More informationHoisting Equipment Cable puller & Accessories
Yale hoists and trolleys are not ed for Cable puller model Yaletrac Pulling force 800-3200 It has a light weight, compact, high tensile aluminium alloy housing with a large flat bottom surface for increased
More informationSSV-Actuator HON 673 (K 1a, K 2a)
SSVActuator HON 673 ( 1a, 2a) 673.20 OPERATING AND MAINTENANCE INSTRUCTIONS/ SPARE PARTS EDITION 01/2017 Serving the Gas Industry orldwide 1. General Our leaflet 720.00 gives full information with technical
More informationType 4708 Supply Pressure Regulator
Type 708 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point range 0.5 to bar (8 to 90 psi) The pressure regulator
More informationHELM Hinging facility according to EN 795:2012 Typ D. Sliding hardware
HELM Hinging facility according to EN 795:2012 Typ D Sliding hardware Contents General Information General Information Page 3 Certification Page 4 Technical Information HELM Track profile Page 7 HELM Bends
More informationF13.11 PARALLEL HINGES F13 PROJECT-OUT WINDOWS AND TOP HUNG WINDOWS
F13 PROJECT-OUT WINDOWS AND TOP HUNG WINDOWS F13.11 01.06.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General...F13.11.03
More informationWindow Replacement Hardware
Casement and Awning Tracks Hand 750-1361414 Shown 750-1361415 Opposite 38-53 Steel 38-53CG CoastGard 38-55 Steel 38-55SS Stainless Steel 38-59 Steel 38-65 Steel 38-54 Aluminum Dorchester 38-51ST Dorchester
More informationINSTRUCTION MANUAL Pressure Relief Device LPT
INSTRUCTION MANUAL Pressure Relief Device LPT 5COV475800 LPT REV00 CONTENT: 1 SAFETY 1.1 Safety instructions 2 1.2 Specified applications 2 1.3 Safety notes on the equipment operation 2 2 PRESSURE RELIEF
More informationQRPGuys Single Lever Mini Paddle
QRPGuys Single Lever Mini Paddle First, familiarize yourself with the parts and check for all the components. If a part is missing, please contact us and we will send one. You must use qrpguys.parts@gmail.com
More informationFloat valves Types SV 4, SV 5 and SV 6
Data sheet Float valves Types SV 4, SV 5 and SV 6 SV 4-6 are for use on the low pressure side as modulating liquid level regulators in refrigeration, freezing and air conditioning systems with ammonia
More informationInstructions for Use. Plug connection for medical gas and vacuum acc. to DIN / 2004 DIN EN ISO
Instructions for Use Plug connection for medical gas and vacuum acc. to DIN 13260-2 / 2004 DIN EN ISO 9170-1 Table of Contents Page 1. MANUFACTURER S DATA... 3 2. INTRODUCTION... 4 3. APPLICATION... 5
More information10.2. Basketball Single Post System
Basketball Basketball Single Post System The basketball single post is made from special aluminium profiles. The structure is supported by one post in the ground. The post measures a cross section of 120
More informationHLS 9000 Swing Door Handle Edition 4
HLS 9000 Swing Door Handle Edition 4 Dallas Series Straight, modern lines. Clean, contemporary appearance. Dallas Series has rapidly grown to one of the most popular styles in our product range. See page
More informationRev J Terminator Parts Book Page 1 of 15 Top End
1181387 Rev J.2016.03.22 Terminator Parts Book Page 1 of 15 Top End 1181387 Rev J.2016.03.22 Terminator Parts Book Page 2 of 15 Top End (800) 532-8677 (727) 522-8677 fax: (727) 522-1007 Terminator: Frame
More information44 CE RANGE WATERTIGHT SURFACE-MOUNTING JUNCTION BOXES
WALL BOXES IN GWPLAST 75 - GWT 650 C GWT 650 C TP 85 C WALLS WITH CABLE GLAND - IP44 AND IP55 GW44001 JUNCTION BOXES WITH PLAIN PRESS-ON LID - IP44 - GREY RAL 7035 LxHxD (mm) No. holes / Ø GW 44 001 Ø
More informationTelescopic winch handle Speedfriend"
Winch handles, jib furlers JIB FURLERS - WINCH HANDLES - SPREADER COVERS 57 Floating winch handles Floating universal size winch handles Fitted with "Lock In" winch system; universal size for any winch;
More informationManual. for Installation. and Maintenance. of Vertical Guide-Rails. Söll-GlideLoc fall arrest system
Manual for Installation and Maintenance of Vertical Guide-Rails Söll-GlideLoc fall arrest system Anodised Aluminium Hot Dip Galvanized Steel Pickled Stainless Steel Part No. FS-SAL Part No. FS-SST Part
More informationMounting and Operating Instructions EB 8546 EN. Supply Pressure Regulator Type Fig. 1 Supply pressure regulators
Supply Pressure Regulator Type 4708 Type 4708-5352 on Type 3730 Positioner Type 4708-52 with filter receptacle Type 4708-6252 on Type 3372 ctuator Fig. Supply pressure regulators Mounting and Operating
More information1-125 Quarter-Turn with Combination Lock Pr20.1 L18
1-125 Quarter-Turn with Combination Lock Pr20.1 L18 Quarter-Turn with Combination Lock RH or LH application. A pre-assembled Quarter-Turn can be installed in the cutout. O-Ring on handle improves grip.
More informationSmart tips! These are the important things with stairs and bridging steps!
Smart tips! These are the important things with stairs and bridging steps! Smart tip 1 Large stepping and standing surfaces: Safe, comfortable and fatigue-free working also with tools and for a longer
More informationManual. for the Installation, Use and Maintenance. Söll-GlideLoc fall arrest system. Rotary-Exit-Section
Manual for the Installation, Use and Maintenance Söll-GlideLoc fall arrest system of Rotary-Exit-Section without footrest Part No. 21814 with footrest Part No. 10558 in conjunction with aluminium Y-spar
More informationSection 12. Chassis Equipment
AUSTRALIAN Section 12 S-12 Chassis Equipment Jockey Wheels & Stands U Bolts Jockey Wheel Receivers Brake Kits Bearings Axles Springs Adjustable Legs Permanent Fixed Steps Ladders Jerry Can Holders Jerry
More informationpneumatic power clamps
pneumatic power clamps Features Király Trading KFT H-1151 Budapest Mogyoród útja 12-14 E-mail:_agi@kiralytrading.hu Your requirements Power element of machines, tools and devices for the following applications:
More informationINSTRUCTIONS & MAINTENANCE SHEET PORTABLE HYDRAULIC PUNCHING HEAD PH045
INSTRUCTIONS & MAINTENANCE SHEET PORTABLE HYDRAULIC PUNCHING HEAD PH045 V05.2013 DECLARATION OF CONFORMITY 2 1. TECHNICAL CHARACTERISTICS Maximum punching capacity: Min / Max. hole diameter: Max. yield
More informationSlide and Turn System SF25
Profile system Frameless all-glass slide and turn system Option of flush or weathered bottom track Optionally with lateral aluminium panel profiles to close the ventilation gap The flush bottom track is
More informationDescription Supply pressure Pressure range Connection Device Page max. bar bar thread
Pressure Regulators Supply pressure Pressure range onnection Device Page max. bar bar thread Maxi -Series, robust, interlockable 1 0. 1.8 / 17 G¼ - G1 R0, R1.0 made of plastic, also for liquids 1,5 0 4
More information3/2-way valve, Series CD07 Qn= 1400 l/min pipe connection compressed air connection output: G 1/4 - M14x1,5 suitable for ATEX
/-way valve, Series CD07 Version Spool valve, zero overlap Sealing principle soft sealing Working pressure min./max. -0.95 bar / 0 bar Ambient temperature min./max. -5 C / +80 C Medium temperature min./max.
More informationK16.10 EDGE DOOR HANDLES K16 DOORS
K16 DOORS K16.10 01.03.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics... K16.10.03 1.1.
More informationCHANNEL & SUPPORT SYSTEMS
Total Cable Management Solutions CHANNEL & SUPPORT SYSTEMS Unitrunk Intelok Channel is a strong, easy to erect support system, ideal for supporting cable trays, cable ladders, pipes and ducting and is
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Cast iron EN GJL 250 body. Reinforced lug for DN200 :
Reinforced lug for DN200 : Size : Ends : Min Temperature : Max Temperature : DN 50 to 200 mm Between flanges ISO PN10/16 ( PN10 for DN200 ) - 10 C + 110 C Max Pressure : 10 Bars Specifications : Long neck
More informationHEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The (SER.22) model knife gate is a bi-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The completely new
More informationrugby rugby Millennium Posts Aluminium Posts No.1 Posts No.2a Posts No.3 Posts Heavy Duty Posts Post Protectors Rucking Pads
rugby 87 Millennium Posts Aluminium Posts No.1 Posts No.2a Posts No.3 Posts Heavy Duty Posts Post Protectors Rucking Pads Tackle Bags rugby setting the standard - leading the field Suppliers of Rugby posts
More informationMANUAL SEALLESS STEEL STRAPPING TOOL MODEL A
OPERATION MANUAL / SPARE PARTS LIST MANUAL SEALLESS STEEL STRAPPING TOOL MODEL A337.0001 13.1912.01 13191201.en/MAS/ 10.02 INDEX PAGE 1 SAFETY INSTRUCTIONS 2 2 WARRANTY CONDITIONS AND LIABILITY 4 3 APPROPRIATE
More informationSalice 4100 Tower Bolt
Salice 4100 Tower Bolt 4100 Rod - 600, 900mm 4100A - (400mm X 49mm) 4100B - (350mm X 49mm) 4100C - (300mm X 49mm) 4100D - (250mm X 49mm) - Brass - POV, AO/POV Tower Bolts Salice 4199 Tower Bolt 4199/D
More informationPrecision Pressure Regulators
hapter - Pressure Regulators Pressure range onnection thread Device Page 3 mm, high precision 0.0 2 / 8 bar G 1 8 RI.02 highly sensitive, max. 3 bar supply pressure 0.002 0.12 / 31 bar ¼"NPT R40.03 without
More information3/8" Dr. Air Butterfly Impact Wrench
8192106 3/8" Dr. Air Butterfly Impact Wrench Owner s Manual Read and understand all instructions before use. Retain this manual for future reference. Specifications Construction: Polished aluminum and
More informationOPERATING INSTRUCTIONS (Translation) Rope winch Type KWE 250 KWV 300 KWE 650 KWV 650 KWE 1000 KWV 1250
1. User groups Duties Operator Operation, visual inspection Specialist personnel Assembly, disassembly, repair, maintenance Tests OPERATING INSTRUCTIONS (Translation) Rope winch Type KWE 250 KWV 300 KWE
More informationKeel-stepped and deck-stepped masts,
Keel-stepped and deck-stepped masts, C-sections and F-sections The T-base and deck ring systems are made to fit both Seldén s conventional mast sections and their matching furling sections. They are also
More information08/2017. No Instructions for assembly and use for fixed ladders
08/2017 No 291331 en Instructions for assembly and use for fixed ladders English... English... A ( Assembly) 2 English Instructions for assembly and use for fixed ladders Contents Information on this manual...4
More informationALUMINIUM TANK AND COMPENSATOR - SERIES 09
ALUMINIUM TANK AND Series 09 has been extended with the addition of an air/oil compensator. The Ø100 air/oil compensator consists of two aluminium flanges and an anodized jacket with an ISO profile, all
More informationA COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32
A COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32 Component Flat Washers Component Flat Washers The Largest Selection in the World! Steel, Stainless Steel and Brass The standard Flatwasher
More informationMounting and Operating Instructions EB 8546 EN. Type 4708 Supply Pressure Regulators. Translation of original instructions. Type Type
Type 4708 Supply Pressure Regulators Translation of original instructions Type 4708-53 Type 4708-64 Type 4708-12 Mounting and Operating Instructions Edition March 2018 Note on these mounting and operating
More informationNew Product Update - September 2017
New Product Update September 2017 Series 1 Ball Bearing Utility Blocks Available Now With a sheave diameter of 1mm these are the smallest and lightest ball bearing blocks available! The single block delivers
More informationSPINNAKER POLE TRACK AND GUIDE CONSOLE
1(5) SPINNAKER POLE TRACK AND GUIDE CONSOLE General Assembly single tracks Cut-out for spreader bracket Fitting single guide console Assembly single tracks with bedding Cut-out for spreader bracket Fitting
More informationDICTATOR Spring Rope Pulleys for the Closing of Sliding Doors
DICTATOR for the Closing of Sliding Doors Spring rope pulleys are a simple, efficient and cost-effective closing device for sliding doors. During the opening of the door the internal spring is tensioned
More informationPlummer Block Housings
Plummer Block Housings TECHNICAL INFORMATION Feature The majority of SLB Plummer Block Housing is made of Gray Cast Iron and is of the models of 'SN', 'SNU' and 'SAF'. Its basic size conforms with 'ISO'
More informationPoolLock Easy Pool Cover
PoolLock Easy Pool Cover INSTALLATION MANUAL The packaging of the PoolLock Easy Cover contains: 1. PoolLock Easy cover (rolled up) 2. One or two manual cranks (according to the pool size) Plastic bag contains:
More informationRudder Kit Assembly Instructions for Quest 13
Rudder Kit Assembly Instructions for Quest 13 Revised 4/2/2015 78501 Rudder System The Hobie Quest is designed for the addition of an optional rudder system. Rudder systems in boats like this allow you
More informationSeptember 2016 File:- Maintenance-3
Page 1 September 2016 File:- Maintenance-3 Maintenance - Alignment Page 2 Latch Grease & Assembly.. Page 4 Adjusting Latch Relative to the Snare.. Page 4 Product Numbers & Bar Codes..Page 6 Latch Spare
More informationNEW TYPE M PRESSURE RELIEF DEVICE
NEW TYPE M PRESSURE RELIEF DEVICE M PRESSURE RELIEF DEVICE ACCORDING TO EN 50216-5/A2 PATENTED 2 PRESSURE RELIEF DEVICE TYPE 50 M Section A-A 170 139 Transformer tank F 41.5 3 ø48.3 ø166 A P.R.D. TAG A
More informationFreshware have a comprehensive range of products for window
NEXT GENERATION HARDWARE September 2 0 1 8 N E W S L E T T E R Toll Free Phone: 1300 361 718 Toll Free Fax: 1300 650 692 Email: sales@freshware.com.au Freshware have a comprehensive range of products for
More informationPlumbing Products FLOOR DRAIN CLEANOUT GATE VALVE BALL VALVE.
Plumbing Products FLOOR DRAIN CLEANOUT GATE VALVE BALL VALVE www.wilsontaylor.co INTRODUCTION Wilson Taylor Asia Pacific, headquartered in Singapore with a subsidiary based in Hong Kong and a representative
More informationTENSOREX C+ TENSOREX C+
Installation instruction TENSOREX C+ TENSOREX C+ is a new spring automatic tensioning device for tramway, light and heavy railways Overhead Contact Lines ( OCL ). TENSOREX Products are only by PFISTERER
More informationHand lever valves VHER
Hand lever valves VHER Hand lever valves VHER Key features Powerful Flexible Practical -M- Flow 170 3800 l/min 4/3-way valve mid-position closed mid-position exhausted mid-position pressurised Connections:
More informationHERZ-Motorised flow controler
HERZ-Motorised flow controler Control and regulating valve Data sheet 46, Issue 214 Dimensions in mm 4 close dimension 9,35 M DN G H1 H2 H2 + Actuator B1 B2 1 2 M 1 46 11 15 3/4 G 66 59 73 134 49 63 48
More informationROLLER SLIDE BALL BEARING
ROLLER SLIDE BALL BEARING ROLLER SLIDE SYSTEM BALL BEARING SLIDE SYSTEM Standard slides and ball bearing slides offering a variety of top quality movement systems. www.grassusa.com Roller slides: Tried-and-tested
More informationList of Material Rope Courses FLEXIBLE PFEIFER SEIL- UND HEBETECHNIK GMBH
09/2014 R O T FLEXILE S U SEIL- UND HEETECHNIK GMH List of Material Rope Courses DR.-KARL-LENZ-STRASSE 66 D-87700 MEMMINGEN TELEPHONE +49 (0) 83 31-937-267 TELEFAX +49 (0) 83 31-937-341 E-MAIL wireropes@pfeifer.de
More informationGas Pressure Regulator HON 300
Gas Pressure Regulator HON 300 OPERATING AND MAINTENANCE INSTRUCTIONS/ SPARE PARTS Serving the Gas Industry Worldwide 300.20 EDITION 01/2017 1. General The "General description 300.00" for the gas pressure
More informationSlide and Turn System SF35
Profile system Framed slide and turn system Non-thermally insulated aluminum profiles with insulated glass Option of flush or weathered bottom track The flush bottom track is particularly suitable for
More informationAdvantage Lockers & Bike
Advantage Lockers & Bike Advantage Bike Racks & Lockers Inc. is the #1 supplier of Storage Lockers and Bike Racks to the Lower Mainland s residential construction industry. With 25+ years of experience
More information3190A NEO-ANGLE DOOR INSTALLATION INSTRUCTIONS. Series MODEL NO
NEO-ANGLE DOOR INSTALLATION INSTRUCTIONS Series 30A Please read these instructions carefully to familiarize yourself with the required tools, materials, and installation sequences. The Exploded Diagram
More informationSimple, handleless, good: Push to open for hinges
Simple, handleless, good: Push to open for hinges Push to open for hinges Simple, handleless, good: Push to open for hinges A gentle press on the door is all it takes for the Push to open piston to move
More informationHoist Ring Forged Hoist Ring Machined Hoist Ring (Metric) Hoist Ring Swivel Shoulder Eyebolts JD Weld-On Alloy Lifting
Hoist Ring Forged........................... 94 Hoist Ring Machined........................ 95 Hoist Ring (Metric).......................... 96 Hoist Ring Swivel........................... 97 Shoulder
More information3M Telecommunications Solutions for Networks. Quante QSA (= LSA plus) System Catalogue. Innovation
3M Telecommunications Solutions for Networks Quante QSA (= LSA plus) System Catalogue Innovation IDC Modules Overview 3M Quante Cross Connect System QSA QSA Series 1 Connection modules for screw fixing
More informationHand winch MANIBOX GR
Hand spurgear winch Hand winch MANIBOX GR Instruction manual UK 34-331.09/9 PRODUCT DEVELOPED AND MANUFACTURED ACCORDING TO STANDARD NF EN 13157 In an endeavour to improve its products, HUCHEZ reserves
More informationLivestock Equipment Bale Movers/ Bale Spears. Tractor Linkage. Grade 5 & 8 Hitch Pins. Tractor Linkage
Hooking a piece of equipment to your tractor? Our selection of hitch pins, locking pins, lift arm/top link parts, PTO adapters will keep things connected. Make sure you have an SMV sign to keep everyone
More informationpneumatic rack and pinion actuators
pneumatic rack and pinion actuators actuator features actuator features Nominal Values: Pressure rating of psig ( barg). Standard temperature range is -4 F to 5 F (- C to 5 C). High temperature range is
More information