Standard Products BRACKETS CONNECTORS ELBOWS FLANGES SPHERES / HEMISPHERES / POST & END CAPS SLIP-ON FITTINGS BIKE RACKS MISCELLANEOUS PRODUCTS

Size: px
Start display at page:

Download "Standard Products BRACKETS CONNECTORS ELBOWS FLANGES SPHERES / HEMISPHERES / POST & END CAPS SLIP-ON FITTINGS BIKE RACKS MISCELLANEOUS PRODUCTS"

Transcription

1 Stndrd Produts BRACKETS CONNECTORS ELBOWS FLANGES SPHERES / HEMISPHERES / POST & END CAPS SLIP-ON FITTINGS BIKE RACKS MISCELLANEOUS PRODUCTS

2 Formed Wll Mount Brkets Formed Wll Mount Brket Aville in Steel, Aluminum, Stinless Steel ( /6" thik) nd Bronze. One, two or three hole mounting options. Snp-On Covers pge re used with these Brkets to over the mounting hrdwre. 2 /2" 2 /2" /8" Bolt Cler Holes for Srews " Formed Wll Mount Brket Round Sddle with One Hole " Mde in MILWAUKEE BRS90R ZINC PLATED GALVANIZED ANODIZED 90R 90R.PL G90R 9R 9R.AN TYPE 04 TYPE 6 BRASS 9R 9R.6 BRS90R Type 04 BRASS C26000 Finish: Steel nd Aluminum Brkets re unfinished. Bronze nd Stinless Steel Brkets re supplied with stin finish. Bright polished, nodized, plted nd glvnized finishes re ville on speil order. 2 /2" 2 /2" /8" Bolt Cler Holes for Srews " Formed Wll Mount Brket Flt Sddle with One Hole " 9F 90F 9F 9F Cler Holes for Bolts Formed Wll Mount Brket Round Sddle with Two Holes 92R 9R 9R Cler Holes for Bolts Formed Wll Mount Brket Flt Sddle with Two Holes 92F 9F 9F Cler Holes for Bolts Cler Holes for Bolts 9R Formed Wll Mount Brket Round Sddle with Three Holes 96R 9R Formed Wll Mount Brket Flt Sddle with Three Holes 96F 9F 9F Note: Imges shown re typil tul prts my vry slightly. View our drwing files t shopwgner.om for tul dimensions. Plese review our qulity expettions sttement on Pge 22. NUMBERS IN BOLD TYPE re typilly in stok. Other items my not e ville for immedite shipment or re mde-to-order requiring minimum quntity nd longer led time. Visit shopwgner.om for vilility. 6 ISO 900:2008 F P T

3 Formed Wll Mount Brkets Formed Brket Universl Sddle, Center Line Universl Sddle Fits Round nd Flt Mterils. Dimensioned to Meet NFPA, ICC, ANSI A. nd 200 ADA. " /2" /8" /8" Bolt Cler Holes for Srews " Cler Holes for Bolts Cler Holes for Bolts ZINC PLATED WITH HOLE WITH HOLE WITH 2 HOLES WITH HOLES WITH HOLE WITH 2 HOLES WITH HOLES WITH HOLE WITH 2 HOLES WITH HOLES PL STANDARD PRODUCTS Formed Brket Round Sddle, " Center Line " 2 /6" Cler Holes for Srews " RAILING SYSTEMS /8" Bolt " 2 /6" /8" Bolt Cler Holes for Srews " " " Cler Holes for Bolts Cler Holes for Bolts Cler Holes for Bolts WITH HOLE WITH 2 HOLES WITH HOLES WITH HOLE WITH 2 HOLES WITH HOLES WITH HOLE WITH 2 HOLES WITH HOLES 98R 940R 944R 99R 94R 94R 99R 99R-2 99R- Formed Brket Flt Sddle, " Center Line Cler Holes for Bolts WITH HOLE WITH 2 HOLES WITH HOLES WITH HOLE WITH 2 HOLES WITH HOLES WITH HOLE WITH 2 HOLES WITH HOLES 98F 940F 944F 99F 94F 94F 99F 99F-2 99F- 99R 99F TRADITIONAL RAILING CUSTOM SERVICES Snp-On Cover For oneled mounting of single hole Formed Brkets shown on pges 6 nd. Two nd Three Hole Brkets must e ountersunk to use these overs. BRASS Style B Filler Use Filler to prevent over tightening of mthing hndril Brket whih my result in rking the drywll. / 4-20 /2" Round Hed Srews inluded. h /8" 49 /8" 49B 2 /8" h Threded Holes for /4-20 Srews (Inluded) /8" Bolt APPENDIX Not ll produts will meet ll ode requirements. Alwys onfirm your lol requirements, produt dimensions nd struturl dt prior to speifying. shopwgner.om

4 Style B /6" Formed Wll Mount Brkets Style B Brket /6" Formed A Wgner Originl Universl Sddle for use with flt or round setions. 2 /8" /8" Bolt Cler Holes for Srews " Type 04 BRASS C26000 BRONZE C28000 (Muntz Metl) Finish: Steel Brkets re unfinished. Bronze nd Stinless Steel Brkets re supplied with stin finish. Bright polished, nodized, plted nd glvnized finishes re ville on speil order. Style B Brket with One Hole GALVANIZED MUNTZ 2 /2" 48 G /2" 48-NSH* " 426 G " 426-NSH* *NSH denotes No Sddle Holes. Cler Holes for Bolts 44 Style B Brket with Two Holes 2 /2" " Cler Holes for Bolts 48 Style B Brket with Three Holes 2 /2" " Redesigned Style B Brket The originl Wgner Style B Formed Hndril Brket hs een redesigned to djust the vertil lerne from the underside of the Hndril to the horizontl rm of the Brket. This Style B Formed Hndril Brket offers /2" horizontl nd vertil lerne to meet ode requirements nd the reommendtions of the 200 ADA Stndrds for Aessile Design (ADASAD). 2 /2" " /2" 9 /6 " Cler Holes for Srews Redesigned Style B Brket with One Hole GALVANIZED MUNTZ 2 /2" 49 G /2" 49-NSH 420-NSH *NSH denotes No Sddle Holes. /8" Bolt 2 49 Note: Imges shown re typil tul prts my vry slightly. View our drwing files t shopwgner.om for tul dimensions. Plese review our qulity expettions sttement on pge 22. NUMBERS IN BOLD TYPE re typilly in stok. Other items my not e ville for immedite shipment or re mde-to-order requiring minimum quntity nd longer led time. Visit shopwgner.om for vilility. 8 ISO 900:2008 F P T

5 Style C Brket /6" Formed For flt wlls or tth to Pipe nd Round Tue Posts with Style H Adpter. Squre nd Retngulr Tue Posts. Limited mounting spe. Universl Sddle for use with flt or round setions. Style C Brket with One Hole Use Style H Adpter to mount to Round Posts. Cler Holes for Srews /8" Bolt Cler Holes for Srews Cler Holes for Bolts /8" /8" /8" /8" 2 /6 " ZINC PLATED 2 /6 " GALVANIZED 2 /2" " 482 PL482 G Style C Brket with Two Holes 2 /2" " Style H Adpter Adpts Style C Brket for use with Pipe or Tue Formed Extruded Style Brket Round Sddle /2" 2 Cler Holes for Srews /8" Bolt /8" Bolt 2" " " THICK /6" THICK 2 2 /8" 90R 990R 2 /2" " 98R 998R Formed Extruded Style Brket Flt Sddle " Cler Holes for Srews /8" Bolt Formed Wll Mount Brkets THICK /6" THICK 2 /8" 2 /8" 90F 990F 2 /8" " 98F 998F /2" Mde in MILWAUKEE 90F Universl Weld Brket Lod dt is ville for these Brkets upon request. 980ST 90R 980SS CUSTOM SERVICES TRADITIONAL RAILING RAILING SYSTEMS STANDARD PRODUCTS OD Pipe Size Pipe OD ZINC PLATED.66" PL /2".90" 40 2" 2.8" 902 Not ll produts will meet ll ode requirements. Alwys onfirm your lol requirements, produt dimensions nd struturl dt prior to speifying. 980ST Style F Filler Use With One Hole Style C Brket. /8" dimeter with one ler hole for /8" Bolt. Use Filler to prevent over tightening of mthing Hndril Brket whih my result in rking the drywll. Depth /8" 4B /8" 4 980SS 4B APPENDIX shopwgner.om 9

6 Trditionl Cst Wll Mount Brkets Trditionl Cst Wll Mount Brkets /6" 2 /8" /8" MALLEABLE IRON Finish: Mllele Iron Brkets re unfinished. Glvnized finishes re ville on speil order. Note: These rkets re eing phsed out nd repled with ode omplint rkets shown on the next pge. r = C'sunk for Srew d Cst Wll Mount Brket Round Sddle with One Hole /8" /8" Bolt 2 6 d MALLEABLE IRON /2" 2 2 /2" /8" 6 2 " /8" 0 Cst Wll Mount Brket Round Sddle with Two Holes Cler Holes for Bolts d MALLEABLE IRON /2" 2 2 /2" /8" 2 " /8" 80 Cst Wll Mount Brket Round Sddle with Three Holes Cler Holes for Bolts - d MALLEABLE IRON /2" 2 2 /2" /8" - 2 " /8" 80- " C'sunk for Srew 2 /2" /2" Cst Wll Mount Brket Flt Sddle with One Hole d 86 d MALLEABLE IRON /2" 2 /6" 2 /2" 4 /6" 86 /2" 2 /6" " 4 /6" 9 /8" /8" Bolt 2 NUMBERS IN BOLD TYPE re typilly in stok. Other items my not e ville for immedite shipment or re mde-to-order requiring minimum quntity nd longer led time. Visit shopwgner.om for vilility. 0 ISO 900:2008 F P T

7 Code Complint Trditionl Cst Wll Mount Brkets ADA nd Code Complint Cst Wll Mount Hndril Brkets MALLEABLE IRON Type 04, ASTM A Alloy B8.2 ASTM B 26 BRONZE C8600 Finish: Mllele Iron Brkets re unfinished. Aluminum, Bronze nd Stinless Steel Brkets re supplied with stin finish. Aluminum stin ler nodized finish is AA-M2-C22-A. A right polished finish is ville on speil order. Round Sddle with One Hole MALLEABLE IRON Flt Sddle* with One Hole ANODIZED BRONZE /2" 2 /6" 2 /2" AN 8 8 /2" 2 /6" AN ANODIZED BRONZE /2" 2 /6" 2 /2" 80F 80FAN 8F 8F /2" 2 /6" 806F 806FAN 86F 84F 80 Round Sddle 80F Flt Sddle /8" Bolt C'sunk for Srew 2 /2" 2 RAILING SYSTEMS STANDARD PRODUCTS Round Sddle with Two Holes MALLEABLE IRON ANODIZED /2" 2 /6" 2 /2" AN 8-2 /2" 2 /6" AN 86-2 Flt Sddle* with Two Holes /2" 2 /6" 2 /2" 80F-2 8F-2 /2" 2 /6" 806F-2 86F-2 Round Sddle with Three Holes MALLEABLE IRON ANODIZED /2" 2 /6" 2 /2" AN 8- /2" 2 /6" AN Round Sddle 80- Round Sddle 80F-2 Flt Sddle Cler Holes for Bolts CUSTOM SERVICES TRADITIONAL RAILING Flt Sddle* with Three Holes /2" 2 /6" 2 /2" 80F- 8F- /2" 2 /6" 806F- 86F- 80F- Flt Sddle Cler Holes for Bolts APPENDIX * Aluminum, Bronze, nd Stinless Steel Flt Sddle Brkets re produed y grinding Round Sddle Brket of mthing dimensions. Note: Porosity is norml ttriute of st produts. Every effort is mde to minimize the pperne of porosity. However, minor pitting nnot e voided nd is to e expeted. Not ll produts will meet ll ode requirements. Alwys onfirm your lol requirements, produt dimensions nd struturl dt prior to speifying. shopwgner.om

8 Cst Wll Mount Hndril Brkets Style D Cst Hndril Brket These Brkets hve een newly designed to meet the requirements for vertil lerne etween the underside of the Hndril nd the Brket rm of /2" DUCTILE/MALLEABLE IRON ASTM A 4 Type 04, ASTM A Alloy B.2 ASTM B 26 BRONZE C8600 BRASS Yellow Brss, C2000 Finish: Dutile nd Mllele Iron Brkets re unfinished. Aluminum, Bronze nd Stinless Steel Brkets re supplied with stin finish. Stin ler nodized finish is AA M2 C22 A2. Bright polished, nodized, plted nd glvnized finishes re ville on speil order. " 2 /2" /6" /2" Universl Sddle Fits Round nd Flt Mterils with One / 8-6 Tpped Hole Sddle Holes Are Cler For Srews. /8-6 Tpped Hole /8" MALLEABLE IRON ANODIZED BRONZE 2 /2" AN AN 486 /6" /2" " 2 /8" Universl Sddle Fits Round nd Flt Mterils with Three Holes Cler for Srews Sddle Holes Are Cler For Srews. /8" 492- MALLEABLE IRON ANODIZED BRONZE 2 /2" AN AN /8" Cst Wll Brket for Tue Sddle fits.0" or 2.00" OD Stinless nd Brss Tue. 2 /2" 2 /8" Countersunk Holes 4 POLISHED POLISHED BRASS Tue OD.0" 2 /2" " 2 /8" " " 2 /8" 4204 /8" /6" Cst Wll Brket for Tue Sddle fits.0" or 2.00" OD Brss Tue. Supplied with polished finish. /6" Hnger Bolt is inluded. /6" Tpped Hole 2 /2" 4 Tue OD POLISHED BRASS.0" 2 /2" " Note: Porosity is norml ttriute of st produts. Every effort is mde to minimize the pperne of porosity, ut minor pitting n not e voided nd is to e expeted. NUMBERS IN BOLD TYPE re typilly in stok. Other items my not e ville for immedite shipment or re mde-to-order requiring minimum quntity nd longer led time. Visit shopwgner.om for vilility. 2 ISO 900:2008 F P T

9 Cst Wll Mount Hndril Brkets Style U Cst Brket with Universl Sddle " 2" /2" /8" 2 2 Countersunk for Srews 0 Universl Sddle Fits Round nd Flt Mterils with One / 8-6 Tpped Hole DUCTILE IRON Stin Aluminum ANODIZED Stin Anodized Aluminum 2 /2" AN 29-2 " 0 AN 29 Typil Filler Use /8-6 Tpped Hole STANDARD PRODUCTS Universl Sddle Fits Round nd Flt Mterils with Two Holes DUCTILE IRON ANODIZED 2 /2" AN -2 " 0 AN Cler Holes for Bolts Typil Anhor Plte Use 0 RAILING SYSTEMS Universl Sddle Fits Round nd Flt Mterils with Three Holes 2 /8" h DUCTILE IRON Threded Holes for /4-20 Srews (Inluded) /8" Bolt ANODIZED 2 /2" AN -2 " 0 9 9AN Brket Wll Filler These optionl Fillers prevent over tightening of mthing Hndril Brkets whih my result in rking the plster or drywll. Use plted Steel Fillers with Aluminum nd Bronze Brkets ll for vilility or emil rfq@milwgner.om. Style B Filler Aville with one ler enter hole for /8" Bolt or three tpped ler holes for Bolts. These Fillers re used with Style D Cst Hndril Brkets. / 4-20 /2" Round Hed Srews inluded. h /8" 49 /8" 49B /6" Cler Holes for Bolts /4-20 Tpped Hole Anhor Plte For use with Style U Brkets only. Six tpped holes nd /6" enter hole with Round Hed Bolts. Center Hole /6" B46 Filler For use with one hole or three hole Style U Brkets only. 2 Filler hs one /6" dimeter /6" enter hole, nd three untpped holes. For use with /8" drywll. 22 Filler hs one /6" dimeter enter hole, nd three tpped holes with mthing /8" Round Hed Srews. For use with /8" /8" drywll. Use Filler to prevent over tightening of mthing Hndril Brket whih my result in rking the drywll. Center Hole For Use In /6" 2 Plster /6" 22 Drywll 0 TRADITIONAL RAILING CUSTOM SERVICES APPENDIX shopwgner.om

10 Extruded Wll Mount Hndril Brkets Extruded Hndril Brkets 2" 2" /2" Holes for #0 FHMS 2 /8" /2" Holes for #0 FHMS 2 /8" 2 /8" /6" /8" Bolt /8" 2 /2" /6" /8" Bolt " ER804 Extruded Hndril Brket, Squre Bse BURNISHED* ANODIZED 2 /2" ER80 ER80A ER800 ER800A Extruded Hndril Brket, Round Bse BURNISHED* 2 /2" ER804 ER8004 * A Burnished Finish is tumled, ut not polished. This removes urrs nd retes "mtte" finish..90".66" BER80 Long Length Shpe The Extruded Hndril Brket shown ove is lso ville in ' lengths without holes. Use to rete Brkets for your speifi requirements. Also ville in lengths up to 0' requires shipment y truk. l/ft length 2 /2" 2.0 ' BER ' BER800 2 /2" /2" /8" Bolt 2 /8" " Extruded Wll Mount Slip-Fit Brket ER8004SF 2 /2" ER804SF ER8004SF BUILDING CODE ISSUES Chek with your lol ode uthorities prior to speifying ny riling system. The following re the most ommon requirements in ommeril nd residentil pplitions: Hndril is required on stirs nd rmps. Height: 4 to 8 inhes ove stir nosings nd rmp surfes. Lod Requirements: 0 ls/ft uniform lod or 200 ls. onentrted lod Clerne: Between wll nd Hndril: /2" minimum Exeptions: NFPA 0: 2 minimum 99 ADAAG: /2" etween the wll nd Hndril (Updted to /2" minimum for 200 ADASAD) Between underside of Hndril nd horizontl Brket Arm: /2" minimum Exeptions: For eh /2" of dditionl Hndril perimeter dimension ove, the vertil lerne dimension of /2" shll e redued y /8". Sutrt From Underside of Riling Clerne From Underside of Riling Riling Dimeter Perimeter.2".92" 0 /2".0" 4." - /8" /8".66".2" -.90".9" - /2" " 2.00" 6.28" - /2" " Refer to Pge 229 for other ode relted informtion. While the 99 ADAAG stted tht the distne etween the wll nd Hndril hd to e /2", ll susequently pulished model odes inluding the 200 ADASAD now stte this to e minimum requirement. Be wre however tht NFPA 0 notes minimum wll lerne of 2 etween the wll nd Hndril. Alwys onfirm requirements with the lol uthority hving jurisdition prior to speifying ny Riling produts. Not ll Brkets will meet ll ode requirements. Confirm your lol requirements nd the Brket dimensions prior to speifying. NUMBERS IN BOLD TYPE re typilly in stok. Other items my not e ville for immedite shipment or re mde-to-order requiring minimum quntity nd longer led time. Visit shopwgner.om for vilility. 4 ISO 900:2008 F P T

11 Wll Mount Hndril Brkets Wll Mount Hndril Brket Rottes To Any Angle. Single Tpped / 8-6 Hole. Brkets re shipped s kits nd re not ssemled. /8" /8" /8" 2 /6" /4 " " BRASS 2 /8" MB22W MB42W 2 /8" MB20W MB40W Set Srew 2 /6" /4 " " 2 /6" /4 " " 2 /8" MB2W 2 /8" MB0W BRASS 2 /8" MB222W MB422W /2" MB202W MB402W " to /8" Tpped Hole /8" Di. Set Srew Set Srew 2 /6" /4 " " Wll Mount Hndril Brket Brket Arm is provided to llow " to to enter of Hndril. Cut s needed for shorter enterline projetions. Rottes To Any Angle. Single Tpped / 8-6 Hole. BRASS GB480 GB482 GB484 Set Srew 2 /6" /4 ".90" Wll Mount Brket With Vertil nd Horizontl Adjustment. GB482 WR900W 2 /8" to /2" /2" to 2" WR900W View Slip-Fit Brkets on Pge 2 CUSTOM SERVICES TRADITIONAL RAILING RAILING SYSTEMS STANDARD PRODUCTS /8" 2 /6" /4 " APPENDIX Set Srew " 2 MB20W /2" MB00W shopwgner.om

12 Wll Mount Hndril Brkets Assemled Br Brkets These Brkets re ssemled from the Components shown on pge. Provided with three ountersunk holes for Srews. Custom designs re lso ville to meet your speifi requirements. Contt Wgner with your requirements. 2 /6" /4 " 2 /6" /4 ".8" 2.40".8" 2.40" RB02.4 Wll Mount Hndril Brket MILL FINISH BRASS 2 /2" RB402 RB02.4 RB602.4 RB400 RB00.4 RB600.4 " RB42.4 Wll Mount Hndril Brket MILL FINISH /8" Tpped Hole " BRASS 2 /2" RB42 RB242 RB42.4 RB442.4 RB40 RB240 RB40.4 RB440.4 Note: Steel nd Stinless Sddles re welded in ple. Brss Sddle is srewed in ple. 2 /6" /4 " /8" Building Code Issues LU20 Inner Sleeve /4 " Snp-On Cover Flnge Wll Mount Brket Stin ler nodized finish is AA M2 C22 A2. " Mount to Wll Using /8" Bolt (y Others) ANODIZED LU20 LU20.AN LU206 VA0W Chek with your lol ode uthorities prior to speifying ny riling system. The following re the most ommon requirements in ommeril nd residentil pplitions: Hndril is required on stirs nd rmps. Height: 4 to 8 inhes ove stir nosings nd rmp surfes. Lod Requirements: 0 ls/ft uniform lod or 200 ls. onentrted lod Clerne: Between wll nd Hndril: /2" minimum Exeptions: NFPA 0: 2 minimum 99 ADAAG: /2" etween the wll nd Hndril (Updted to /2" minimum for 200 ADASAD) Between underside of Hndril nd horizontl Brket Arm: /2" minimum Exeptions: For eh /2" of dditionl Hndril perimeter dimension ove, the vertil lerne dimension of /2" shll e redued y /8". Mount Outer Sleeve To Vertil Riling Set Srew Riling Vertil Mount Stnd-Off Useful for elevtor pplitions. Adpters sold seprtely. Also ville without Wll Flnge see pge 9. Stin finish. BRASS VA0W VS0W VB0W Sutrt From Underside of Riling Clerne From Underside of Riling Riling Dimeter Perimeter.2".92" 0 /2".0" 4." - /8" /8".66".2" -.90".9" - /2" " 2.00" 6.28" - /2" " Refer to pge 229 for other ode relted informtion. NUMBERS IN BOLD TYPE re typilly in stok. Other items my not e ville for immedite shipment or re mde-to-order requiring minimum quntity nd longer led time. Visit shopwgner.om for vilility. 6 ISO 900:2008 F P T

13 Hndril Brket Components Br Brket Components These omponents provide the prts neessry to frite Brkets for your unique requirements. Weld the Brket Arm diretly to your Post or tth to Brket Bse to mke Wll Mount Hndril Brket. Trim the Brket Arm s needed to mth your projetion requirements. When longer Brket Arms re lled for, Wgner n mnufture Br Bends speifi for your jo. Be wre tht longer Brket Arms will inrese stress t the wll onnetion. Reduing Brket sping will strengthen the ril in suh ses. Consult with struturl engineer in extreme situtions. Contt rfq@milwgner.om. Mde in MILWAUKEE Snp-On Cover Bse or Brket Bse Brket Sddle Brket Arm Snp-On Cover Flnge STANDARD PRODUCTS Brket Arm Inside Rdius = Br Dimeter.0". Ends Untrimmed, No Holes; " Legs. Mill Finish. Contt Wgner for finish nd hole options. Br Dimeter C6000 BRASS C800 BRONZE /2" R0 R240 R20 R0 R20 /8" R40 R20 R0 R60 R220 R0 R260 R80 R90 R20 Brket Bse " Dimeter Thik. With or Without Holes. Mill Finish. Contt Wgner for finish nd other hole onfigurtion options Snp-On Cover Flnge Bse.80" Thik.." Dimeter. Three holes Cler For Bolts. Refer to pge 9 For Additionl Sizes. Center Hole 0 04 /2" 202B 2022B 202B /8" 20B 202B 20B 204B 2042B 204B Snp-On Cover Flnge Mill Finish. Contt Wgner for Other Options. 8 G. Dimeter /2" High Refer to pge 9 for Additionl Sizes. D4C6 C26000 BRASS R60 C28000 BRONZE Hole Size No Hole D4 D44 D4 D46 D46M /2" D4C D44C D4C D46C D46MC /8" D4C6 D44C6 D4C6 D46C6 D46MC6 D4C D44C D4C D46C 202 Hole 0 04 /2" /8" Brket Sddle 2 /2" Long " Wide 2 Guge. With Two Holes Cler for Srews. One /8" Center Hole. For.0" to 2.00" Dimeter Mteril. Mill finish exept s noted Round Sddle C6000 C800 BRASS BRONZE S0 S02 S0 S0.4 S0.6 S04 S0 Flt Sddle C6000 C800 BRASS BRONZE S0F S02F S0F S04F S0F Glss Mount Adpter Kits Most of the Glss Mount Brkets shown on pge 20 nd 2 use these Glss Mount Adpter Kits. Aluminum nd Brss Brkets use Disk with ountersunk hole nd Bolt. Stinless Steel Brkets use Disk with Welded Stud. Kit ontining Disk with ountersunk hole, 2 Gskets, Sper nd Bolt. Glss Thikness Disk Dimeter * BRONZE /2".00" GB48K GB48K.00" GB48K. /2".90" GB486K /2".2" GB2000K GB4000K.2" GB4000K. * Note: A Stinless Steel Bolt is provided with the Aluminum kit. Kit ontins Disk with Welded Stud, 2 Gskets, nd Sper. Glss Thikness Disk Dimeter /2".00" GB48K.00" GB48K. /2".90" GB48K.90" GB48K. /2".2" GB000K.2" GB000K. S02 APPENDIX CUSTOM SERVICES TRADITIONAL RAILING RAILING SYSTEMS shopwgner.om

14 /8" Post Mount Hndril Brkets Post Mount Hndril Brkets Squre or Retngulr Posts. Pipe nd Round Tue Posts using Adpters (pge 24) purhse seprtely. Rotte to ny ngle. Single tpped /8-6 hole. Brkets re shipped s kits nd re not ssemled. 2 /6" /4 " ¼" Bolt ¼" Set Srew Set Srew 2 /6" Post Mount Brket With Vertil nd Horizontl Adjustment. Ptent No.,8,89 Use AS90 Adpter for use with /2" Pipe Post see pge /8" to /2" to 2" WR900P ¾" ½ /4 " /8" BRASS 2 /8" MB22P MB42P 2 /8" MB20P MB40P 2 /6" /4 " 44 Style C Brket /6" Formed Use Style H Adpter to Mount to Round Posts. See Aove. 2 /2" 44 " 482 Holes /8" Bolt /8" /8" 2 /6" 2 /2" MB2P MB0P Style H Adpter Adpts Style C Brket for use with Pipe or Tue. 2 /6 " Pipe Size Pipe OD.66" /2".90" 40 2" 2.8" 902 OD /8" 2 /2" 9 /6 " Set Srew /4 " BRASS 2 /8" MB222P MB422P MB202P MB402P C sunk for Srews Cp Srew Threded Rivet (provided) 2" 2 /2" /8" 2 /6" /4 " Set Srew 2 /2" MB20P MB00P Cst Post Brket Mounts to Post with Cp Srew nd Threded Rivet whih re provided. Rottes to ny ngle. Provides for /2" lerne etween Hndril nd post s required y ADA nd uilding odes. CLEAR ANODIZED TUMBLED MILL FINISH 2 /2" IR8KA IR8KM-8 NUMBERS IN BOLD TYPE re typilly in stok. Other items my not e ville for immedite shipment or re mde-to-order requiring minimum quntity nd longer led time. Visit shopwgner.om for vilility. 8 ISO 900:2008 F P T

15 Post Mount Hndril Brkets Adjustle Post Mount Brket For use with Stinless Steel Posts. Sddle djusts to stir or rmp ngle s needed. Adjustle Brket 0 to 6 degree rnge. Pipe Size Dimeter Shedule Wll.2".0".20" LU29.".66" 40.40" LU28.60" /2".90" 40. LU2 Adjustle Post Mount Brket For use with Stinless Steel Posts. Vertil nd ngle re oth djustle. 0 to 6 degree rnge. /8" 2 /8" 9 /6 " 2." LU2 Drill nd Tp Post for /4-20 Set Srew 2 /8" 9 /6 " STANDARD PRODUCTS Pipe Dimeter Sh. Wll.2".0".20" 2-4 /8" WR00AA.".66" " 2-4 /8" WR660AA.60" /2".90" /8" WR900AA Vertil Mount Hndril Brket Stnd-Off Useful for elevtor orridor riling pplitions. /2 " WR900AA Inner Sleeve Mount to Wll Using /8" Bolt (y Others) RAILING SYSTEMS BRASS VA0 VS0 VB0 Mount Outer Sleeve To Vertil Riling Set Srew Riling Squre & Retngulr Post Fittings These fittings permit the mounting of pipe rilings diretly to squre or retngulr post mteril. They re ville for olt on or weld pplitions. VA0 TRADITIONAL RAILING Weld Thik Metl Weld Type With Yoke Thik. Pipe Size WITH /2" HOLE WITH OUT HOLE /8" /8" 2 /8" 09 09NH CUSTOM SERVICES Newel Post Weld Thik Metl Weld Type Without Yoke Thik. APPENDIX Pipe Size WITH /2" HOLE WITH OUT HOLE /8" /8" 2 /8" NH Dimensions shown re for referene only. Downlod imge file t shopwgner.om to onfirm dimensions prior to speifying. shopwgner.om 9

16 Glss Mount Hndril Brkets Glss Mount Brkets In stirwy, gurd pplition 42" high odes will generlly require tht Hndril e provided t height etween nd 8". With Glss Riling systems refer to pge 02 Glss Brkets permit tthment of diretly to or etween tempered glss struturl lustrdes. Provide hole for /2" glss; /6" hole for glss. Refer to tle on pge 22 for minimum hole requirements. Hole Spes for Glss If hole is to e drilled in the glss, it must e done prior to tempering. Attempts to drill holes or grind the glss fter tempering will most likely use rekge. For dditionl informtion, see pge 22. Note: Stinless Steel rkets use disk with welded stud. Aluminum nd rss rkets use disk with ountersunk hole nd olt. See photos on pge. Brkets re shipped s kits nd re not ssemled. 2 /6" /4 " 2 /6" /4 " /8" /8" OD Nylon Sper " /8" OD Nylon Sper 2 /6" /4 " 2 /6" /4 " /8" /8" Set Srew Set Srew /8" OD Nylon Sper " /8" OD Nylon Sper " " to 2 /6" /4 " 2 to " 2 /6" /4 " /8" /8" /8" " glss BRASS 2 /8" /2" - GB22 GB42 2 /8" /2" - GB20 GB40 glss 2 /8" /2" - GB2 2 /8" /2" - GB0 GB20 glss BRASS 2 /8" /2" - GB222 GB422 /2" /2" - GB202 GB402 2 GB20 /2" GB00 Di. Set Srew /8" OD Nylon Sper " GB48 Di. Set Srew /8" OD Nylon Sper.8" GB486 Brket rm is provided to llow " to to enter of Hndril. Cut s needed for shorter enterline projetions. glss BRASS /2" GB48 GB48 GB48 GB4 GB4 GB4 Brket rm is provided to llow 2 to " to enter of Hndril. Cut s needed for shorter enterline projetions. glss BRASS /2" GB486 GB48 GB488 GB46 GB4 GB48 NUMBERS IN BOLD TYPE re typilly in stok. Other items my not e ville for immedite shipment or re mde-to-order requiring minimum quntity nd longer led time. Visit shopwgner.om for vilility. 20 ISO 900:2008 F P T

17 /8" Glss Mount Hndril Brkets 2 /6" /4 " 2 /6" /4 " /8" /8" OD Nylon Sper /4 " glss BRASS 2 /8" /2" GB22 GB42 2 /8" /2" - GB20 GB40 2 /8" GB229 GB429 /8" OD Nylon Sper /4 " glss 2 /8" /2" GB2 2 /8" /2" - GB0 2 /8" GB29 STANDARD PRODUCTS 2 /6 " /4 " 2 /6" /4 " /8" Set Srew /8" OD Nylon Sper /4 " glss BRASS 2 /8" /2" - GB224 GB424 /2" - GB204 GB404 Set Srew /8" OD Nylon Sper Set Srew 2 /6" /4 ".90" Glss Mount Brket With Vertil nd Horizontl Adjustment. For use with /2" or glss. 2 /8" to /2" /2" to 2" GR900 2 /6" /4 " /8" Set Srew /8" OD Nylon Sper 2 2 /2" 2 /2" 2 /4 " GB20 glss 2 /2" /2" GB20 /2" GB0 2 /2" GB2 GB 99 Glss Mount Hndril Brket No struturl test dt is ville for these Brkets. This Brket uses ountersunk Srew. Tue OD POLISHED.0" " 99-2 RAILING SYSTEMS TRADITIONAL RAILING CUSTOM SERVICES.8" 2.40" /8" Tpped Hole /8" OD Nylon Sper Glss Mount Hndril Brket Note: Stinless Sddles re welded in ple. Brss nd Aluminum Sddles re srewed in ple. BRASS 2 /8" GB42.4 GB442.4 /2" GB40.4 GB440.4 " GB42.4 Not ll produts will meet ll ode requirements. Alwys onfirm your lol requirements, produt dimensions nd struturl dt prior to speifying. APPENDIX shopwgner.om 2

18 Wgner Slip-Fit Wll Mount Hndril Brkets.90" Mde in MILWAUKEE US Pt. 866 S teel , Zin Plted. S tinless Steel Type 04, Stin Finish. Aluminum 606, Mill Finish. For use with Shedule, 0 or 40 Pipe (.66" OD with.062" to.40" wll thikness). 2/2" 2/8" /2".66" /8" Bolt " Slip-Fit Brkets ER8004SF Extruded Wll Mount Slip-Fit Brket.90".90".90" ER804SF ER8004SF 2/2" /8" /2" /8" /2" 2 /2" 2/2" " /8" Bolt " 92SF /8" Bolt /8" Bolt " 9RSF " Formed Wll Mount Slip-Fit Brket Dimensioned to Meet NFPA, ICC, ANSI A. nd 200 ADA. ZINC PLATED ZINC PLATED 929SF.PL.90" Formed Wll Mount Slip-Fit Brket 92SF 9RSF Slip-Fit Brkets 90RSF.PL 2. I NSERT PIPE into eh side of Brket rrel.. T IGHTEN SCREWS lternting etween Srews until oth re tight. Repet for other Brkets. 2/2" No Welding No Unsightly Gpping t Butt Joints " Quik nd Esy to Instll. LOOSEN SCREWS until there is enough room etween strip lmp nd rrel to insert Pipe. Mde in MILWAUKEE 2/2" / " I finished 6 ofbolt the rooms " in two dys, totl of hours x men. My originl estimte ws 0 dys x men. 8 Whoever designed Slip-Fit is deserving of promotion. Leon Burgess, Preision Metls Jo: University of Florid, Ginesville, FL Frited nd Instlled y Preision Metls, In., Alhu, FL NUMBERS IN BOLD TYPE re typilly in stok. Other items my not e ville for immedite shipment or re mde-to-order requiring minimum quntity nd longer led time. Visit shopwgner.om for vilility. 22 ISO 900:2008 F P T

19 Wgner Slip-Fit Hndril Brkets Slip-Fit Hndril Brkets US Pt ".66" /4 " Bolt Set Srew Set Srew Clmp Srew Post Mount Slip-Fit Brket With Vertil nd Horizontl Adjustment. Use with.66" OD Hndril only with wll thikness etween.09" to.40". Use AS90 Adpter for use with /2" Pipe Post see pge 24. /2" to 2" 2 /8" to WR66SFP /2".66" /8" Tpped Hole.90" Set Srew Set Srew Clmp Srew.90" Wll Mount Slip-Fit Brket With Vertil nd Horizontl Adjustment. Use with.66" OD Hndril only with wll thikness etween.09" to.40". /2" to 2" 2 /8" to WR66SFW.66" STANDARD PRODUCTS RAILING SYSTEMS.90" Set Srew Set Srew /8" Nylon Sper Clmp Srew.90" Glss Mount Slip-Fit Brket With Vertil nd Horizontl Adjustment. Use with.66" OD Hndril only with wll thikness etween.09" to.40". For use with /2" or glss. /2" to 2" 2 /8" to GR66SF Quik Assemly No Welding.66".90" Post Top Slip-Fit Brket Use with.90" OD Posts With.09" to.40" Wll Thikness. Use with.66" OD Hndril only with wll thikness etween.09" to.40". 2 to 4 /8" WR909SFA Stinless Steel Pipe Type 04, Stin Finish Pipe Size Sh. OD t 6' LENGTH OD 8' LENGTH.66".09" P6.4-6 P ".09" P P ".40" P P92.4 t APPENDIX TRADITIONAL RAILING CUSTOM SERVICES Loosen Set Srew. Remove vertil rm nd rrel ssemly. Loosen Bolt to relese lmp. Insert Tue. Tighten Bolt to lok Hndril in ple. Ressemle Brket nd tighten Set Srew. shopwgner.om 2

20 Brket Wll Fillers nd Adpters Brket Wll Fillers These optionl Fillers re for plster wlls or wll ord. The fillers prevent over tightening of mthing Hndril Brkets whih my result in rking the drywll. Aville with one ler enter hole for /8" Bolt, or one enter hole nd three tpped ler holes for Bolts. These Fillers re used with Style B nd Formed Hndril Brkets shown on pges 4 -. Use Plted Steel Fillers with Aluminum nd Bronze Brkets. Cll for vilility. h /6" Cler Holes Typil Filler Use Style A Filler For use with one hole Brket. /6" 2 /8" /8" Bolt h /8" 2B /8" 2 Bolt not inluded. /8" Filler For use with one hole or three hole Style U Brkets only. 2 Filler hs one /6" dimeter enter hole, nd three untpped holes. For use with /8" drywll. 22 Filler hs one /6" dimeter enter hole, nd three tpped holes with mthing /8" Round Hed Srews. For use with /8" drywll. Center Hole ZINC PLATED FOR USE IN /6" 2 PL2 Plster /6" 22 PL22 Drywll 2 /8" h Threded Holes for /4-20 Srews (Inluded) /8" Bolt Style B Filler For use with three hole Brket. Inludes three /8" Round Hed Srews. h /8" 49B /8" 49 Bolt not inluded. Typil Anhor Plte Use /6" /4-20 Tpped Hole B46 Anhor Plte For use with Style U Brkets only. Six tpped holes nd /6" enter hole with Round Hed Bolts. Center Hole /6" B46 AA90 AA904 Adpter Permits the Vertil Mount nd Post Mount Brkets to e used with Pipe nd Tuing. Stin finish. Hole For OD BRASS /6".0" AA0 AS0 AB0 /6".66" AS60 /6".90" AA90 AS90 AB90 /6" 2.00" AA200 AS200 AB200 /6".90" /2" AS90 NUMBERS IN BOLD TYPE re typilly in stok. Other items my not e ville for immedite shipment or re mde-to-order requiring minimum quntity nd longer led time. Visit shopwgner.om for vilility. 24 ISO 900:2008 F P T

21 Typil Hndril Brkets Atthment Typil Hndril Brket Atthments Due to struturl requirements for Hndril Brkets s noted elow proper tthment is ritil to ssure sfety. There re other methods of tthment. Chek with your Fstener supplier regrding Epoxy Anhors nd Anhors for hollow lok. In hollow wll pplitions, Hndril Brkets must e fstened to wood studs or pproprite loking must e provided for struturl tthment. Cst Brket with Tpped Hole Formed Brket with Three Holes Mhined Brket with Tpped Hole STANDARD PRODUCTS Hnger Bolt with Lg Srew Expnsion Shield Mhine Srews olted to Filler Hnger Bolt with Lg Srew Expnsion Shield Cst Brket with One Hole Extruded Brket with One Hole Cst Brket with Tpped Hole RAILING SYSTEMS Through Bolt with Bking Plte Lg Srew into wood stud or loking BUILDING CODE ISSUES Chek with your lol ode uthorities prior to speifying ny riling system. The following re the most ommon requirements in ommeril nd residentil pplitions: Hndril is required on stirs nd rmps. Height: 4 to 8 inhes ove stir nosings nd rmp surfes. Lod Requirements: 0 ls/ft uniform lod or 200 ls. onentrted lod Clerne: Between wll nd Hndril: /2" minimum Exeptions: NFPA 0: 2 minimum 99 ADAAG: /2" etween the wll nd Hndril (Updted to /2" minimum for 200 ADASAD) Between underside of Hndril nd horizontl Brket Arm: /2" minimum Exeptions: For eh /2" of dditionl Hndril perimeter dimension ove, the vertil lerne dimension of /2" shll e redued y /8". Sutrt From Underside of Riling Clerne From Underside of Riling Riling Dimeter Perimeter.2".92" 0 /2".0" 4." - /8" /8".66".2" -.90".9" - /2" " 2.00" 6.28" - /2" " Refer to pge 229 for other ode relted informtion. Typil Assemly nd Glss Detils Set Srew Button Hed Bolt Srew Sddle Cst Sddle Hnger Bolt into wood stud or loking Glss Set Srew Glss Srew Sddle Gsket Glss Gsket Gsket Stud Welded Bking Disk Nylon Sper Nylon Sper Nylon Sper Countersunk Bking Disk With Srew Stud Welded Bking Disk TRADITIONAL RAILING CUSTOM SERVICES APPENDIX shopwgner.om 2

10mm SHOWER PANEL SIZES 1000 & 1200 SIZES 500, 600, 700, 800 & 900 SIZES 1000 & 1200 OPTION 1 - PAGES 2-4 OPTION 2 - PAGES 2-5 OPTION 3 - PAGES 6-7

10mm SHOWER PANEL SIZES 1000 & 1200 SIZES 500, 600, 700, 800 & 900 SIZES 1000 & 1200 OPTION 1 - PAGES 2-4 OPTION 2 - PAGES 2-5 OPTION 3 - PAGES 6-7 SHOWER PANEL 785 / Issue / 5 SIZES 5, 6, 7, 8 & 9 SIZES & SIZES & OPTION - PAGES - OPTION - PAGES - 5 OPTION 3 - PAGES 6-7 Plese red these instrutions refully nd keep for future referene. Inorret fitting

More information

SECTION 5 CONVEY LINE & CONVEY LINE ACCESSORIES Tubing and Pipe

SECTION 5 CONVEY LINE & CONVEY LINE ACCESSORIES Tubing and Pipe SETION 5 ONVEY LINE & ONVEY LINE ESSORIES Tubing and Pipe TUING ND PIPE STRIGHT LENGTHS vailable in cut-to-length; 20-ft to 40-ft random lengths vailable in: galvanized steel MTERIL FORM ITEM NUMER DESRIPTION

More information

400 Series Flat Panel Monitor Arm Rotate Mount Double Pivot P/L

400 Series Flat Panel Monitor Arm Rotate Mount Double Pivot P/L User's Guide 400 Series Flt Pnel Monitor Arm Rotte Mount Doule Pivot P/L < 23ls. (10.44 kg) For the ltest User Instlltion Guide plese visit: www.ergotron.om 1 of 10 Hzrd Symols Review These symols lert

More information

Workrite Sierra HX & HXL Assembly Instructions for 3-leg Electric Workcenters

Workrite Sierra HX & HXL Assembly Instructions for 3-leg Electric Workcenters Workrite ierr HX & HXL Assemly Instrutions for 3-leg Eletri Workenters #1500216- Rev Workrite ierr HX & HXL Eletri Workenters - Assemly Instrutions for 3-leg les Rer Leg rket* Qty: 2 List of rts, grouped

More information

* SEE ANCHOR SCHEDULE SHEET 7

* SEE ANCHOR SCHEDULE SHEET 7 "-20 MLE PNELMTE W/ WINGNUT -1/2" O.C. "-20 X 1/2" MCHINE OLT & NUT -1/2" O.C 04/0/15 JH UPDTE TO 5TH EDITION (2014) FC 8/14/1 Y DTE SPCING ERROR OR MSONRY POWERS CLK-IN W/ "-20 SIDEWLK OLT -1/2" O.C.

More information

Lesson 2 PRACTICE PROBLEMS Using Trigonometry in Any Triangle

Lesson 2 PRACTICE PROBLEMS Using Trigonometry in Any Triangle Nme: Unit 6 Trigonometri Methods Lesson 2 PRTIE PROLEMS Using Trigonometry in ny Tringle I n utilize the Lw of Sines nd the Lw of osines to solve prolems involving indiret mesurement in non-right tringles.

More information

Connectors according to DIN / IEC

Connectors according to DIN / IEC E L E C T R O N I C C O N N E C T O R S Connetors ording to DIN 41612 / IEC 60603-2 56 ept GmH I Tel. +49 (0) 88 61 / 25 01 0 I Fx +49 (0) 88 61 / 55 07 I E-Mil sles@ept.de I www.ept.de Contents Introdution

More information

HD CONDUIT MIN. 10% FALL CHAMBER MONITORING SYSTEM HD CONDUIT REFER NOTE 13 SECTION C-C DETAILS OF BENCHING

HD CONDUIT MIN. 10% FALL CHAMBER MONITORING SYSTEM HD CONDUIT REFER NOTE 13 SECTION C-C DETAILS OF BENCHING FLOT SWITH DN50 upv PRESSURE FOR SENSOR TUING ( OVER) REFER TO 4 ND FLOT SWITH (50%) DN80 upv SUTION (600 OVER) GRVITY SEWER MINS FLL TOWRDS SUMP REFER TO NOTE 9 PLN (OVERS REMOVED) SLIDE GTE VLVE ± HMER

More information

JOHNSTON COUNTY DEPARTMENT OF UTILITIES DUCHESS DOWNS FORCE MAIN IMPROVMENTS OCTOBER 2017

JOHNSTON COUNTY DEPARTMENT OF UTILITIES DUCHESS DOWNS FORCE MAIN IMPROVMENTS OCTOBER 2017 DEPRTMENT OF UTILITIES FORE MIN IMPROVMENTS OTOER 2017 Owner: Johnston ounty ORD OF OMMISSIRS Jeffrey P. arver - hairman Ted G. Godwin - Vice hairman ookie Pope llen L. Mims, Jr. had M. Stewart Keith ranch

More information

6 TRIGONOMETRY TASK 6.1 TASK 6.2. hypotenuse. opposite. adjacent. opposite. hypotenuse 34. adjacent. opposite. a f

6 TRIGONOMETRY TASK 6.1 TASK 6.2. hypotenuse. opposite. adjacent. opposite. hypotenuse 34. adjacent. opposite. a f 1 6 TIGONOMETY TK 6.1 In eh tringle elow, note the ngle given nd stte whether the identified side is in the orret position or not. 1. 4. opposite 41 2. djent 3. 58 63 djent 32 hypotenuse 5. 68 djent 6.

More information

1 Measurement. What you will learn. World s largest cylindrical aquarium. Australian Curriculum Measurement and Geometry Using units of measurement

1 Measurement. What you will learn. World s largest cylindrical aquarium. Australian Curriculum Measurement and Geometry Using units of measurement Austrlin Curriulum Mesurement nd Geometry Using units of mesurement hpter 1 Mesurement Wht you will lern 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 Conversion of units Perimeter Cirumferene Are Are of irle Surfe

More information

Fino Installation Instructions

Fino Installation Instructions Fino nstlltion nstrutions #1500154- Rev C Fino nstlltion nstrutions A Light Fixture Trnsformer Qty: 0 or 1 1 C Prts Rotting Mgneti Mounts Qty: 3 or 6 2 D Fixe Mgneti Mounts Qty: 4 or 8 2 E Rotting Woo

More information

Hybrid Relief Valves

Hybrid Relief Valves Hyrid Relief Vlves Crtridge Type Pge Diret Ating Relief, Before Chek 7 Diret Ating Relief, After Chek 7 Pilot Operted, Blned Piston, Ventle, Relief, Before Chek 7 T-8A Pilot Operted, Blned Piston, Ventle,

More information

SGP-20S SGP-25S SGP-32S SGP-40S. Price $ $ $ $ Filtered compressed air, lubricated or non-lubricated

SGP-20S SGP-25S SGP-32S SGP-40S. Price $ $ $ $ Filtered compressed air, lubricated or non-lubricated SGP-S -JW SELF-ENTERING PRLLEL PNEUMTI GRIPPER (SERIES SGP-S) Double-ting. Ptented bklsh djusting system. High performne in ompt size. The rugged onstrution ensures trouble-free long life nd relibility

More information

Our all-rounder stands out for its superb precision and durability. Central clamping of workpiece for conventional clamping and clamping of

Our all-rounder stands out for its superb precision and durability. Central clamping of workpiece for conventional clamping and clamping of 124 Allmti CENTRO GRIPP FOR CENTRAL GRIPPING Our ll-rounder stnds out for its super preision nd durility. Centrl lmping of workpiee for onventionl lmping nd lmping of unmined prts. Idel for 5-sided mining.

More information

S5 HAB/HAD SEAT Abductor / Adductor

S5 HAB/HAD SEAT Abductor / Adductor Number S3-S5/QTY. DESRIPTION SF615 1 NITRO H SET FRME M635 1 LEFT MOVEMENT RM LK639 1 S3 H RNGE SELETOR LEVER S602 1 S3H SET K M634 1 RIGHT MOVEMENT RM LK635 1 S3H IDLER LINKGE SSY LK634 1 S3H SELETOR

More information

AT200 INSTALLATION MANUAL

AT200 INSTALLATION MANUAL ENGLISH AT200 INSTALLATION MANUAL D29020CS416-XXX - SEAT & BOWL COMBINATION-CWH D23020CS11S-XXX - BOWL-CWH D28000AS416-XXX - SEAT / BODY UNIT-CWH Cnvs White (415) Tle of Contents 1. Oserve Listed Preutions

More information

Apply the Pythagorean Theorem

Apply the Pythagorean Theorem 8. Apply the Pythgoren Theorem The Pythgoren theorem is nmed fter the Greek philosopher nd mthemtiin Pythgors (580500 B.C.E.). Although nient texts indite tht different iviliztions understood this property

More information

INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS Non-Refrigerated Universal Bi-Level AquaAccess Barrier Free, Wall Mounted Water Cooler

INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS Non-Refrigerated Universal Bi-Level AquaAccess Barrier Free, Wall Mounted Water Cooler INSTLLTION, OPERTION ND MINTENNCE INSTRUCTIONS Non-Refrigerated Universal i-level quaccess arrier Free, Wall Mounted Water Cooler OR lternate Configuration Standard Configuration 112100F-UL / 112100-UL

More information

AN Wireless Tower Assembly Instructions

AN Wireless Tower Assembly Instructions N Wireless Tower ssembly Instructions RED THOROUGHLY EFORE SSEMLY ND ERETION Thank you for your purchase of an N Wireless Self Supporting Tower. N Wireless Towers are designed and fabricated to be high-strength,

More information

So Chic Dollhouse. Assembly Instructions Item #65078

So Chic Dollhouse. Assembly Instructions Item #65078 Please retain this information for future reference So hic Dollhouse ssembly Instructions Item #65078 To order replacement parts, please visit UTION: dult assembly required. Hardware contains small screws

More information

7.2 Assess Your Understanding

7.2 Assess Your Understanding 538 HPTER 7 pplitions of Trigonometri Funtions 7. ssess Your Understnding re You Prepred? nswers re given t the end of these exerises. If you get wrong nswer, red the pges listed in red. 1. The differene

More information

In any right-angle triangle the side opposite to the right angle is called the Label the Hypotenuse in each diagram above.

In any right-angle triangle the side opposite to the right angle is called the Label the Hypotenuse in each diagram above. 9 Ademi Mth Dte: Pythgoren Theorem RIGHT ANGLE TRIANGLE - A right tringle is tringle with one 90 0 ngle. For exmple: In ny right-ngle tringle the side opposite to the right ngle is lled the Lbel the Hypotenuse

More information

Plant Growth Regulators in Spring Wheat. Anne Kirk, Craig Linde, and Pam de Rocquigny. Manitoba Agriculture

Plant Growth Regulators in Spring Wheat. Anne Kirk, Craig Linde, and Pam de Rocquigny. Manitoba Agriculture Plnt Growth Regultors in Spring Whet Anne Kirk, Crig Linde, nd Pm de Roquigny Mnito Agriulture Lodging is mjor rop prodution issue, espeilly in high yielding environments. Yield losses n rnge from 5 to

More information

PENTAIR/PAC FAB HI-FLOW, 2" PENTAIR/PAC FAB 2" PVC SLIDE VALVE

PENTAIR/PAC FAB HI-FLOW, 2 PENTAIR/PAC FAB 2 PVC SLIDE VALVE PENTIR/PC F HI-FLOW, " MODELS 0, 00, E-0 COMPLETE HI FLOW VLVE, 0 NO PLUMING -0 COMPLETE VLVE W/ PLUMING 00 SND FILTER VERSION 00- COMPLETE VLVE W/ PLUMING DE -0 HNDLE, VLVE 0-0 SCREW, HNDLE S.S 0-0 WSHER,

More information

1'-0" [0.305 m] WALL TYPICAL U.N.O. OPP. HAND C S3.3 S3.3 TW 99'-8 OPP. HAND TW 99'-8 TF 95'-6 B S3.2

1'-0 [0.305 m] WALL TYPICAL U.N.O. OPP. HAND C S3.3 S3.3 TW 99'-8 OPP. HAND TW 99'-8 TF 95'-6 B S3.2 FOUNDTION PLN NOTES 1. T.W. INDITES TOP OF ON. WLL ELEV.. T.F. INDITES TOP OF ON. FOOTING ELEV.. T.L. TOP OF LEDGE 4. INDITES FOOTING STEP 5. INDITES TOP OF ONRETE WLL STEP HND '-6" [0.76 m] FTG. TYPIL

More information

Cooling System. Table of Contents. Section 6A - All Models. All Models

Cooling System. Table of Contents. Section 6A - All Models. All Models Cooling System All Models Tle of Contents Setion 6A - All Models Flow Speifitions...6A-3 Sewter Inlet Speifitions...6A-4 Generl Informtion...6A-4 Sewter Pump Identifition...6A-4 Sewter Inlet Hose...6A-5

More information

Instructions for Continued Airworthiness

Instructions for Continued Airworthiness Instructions for ontinued irworthiness Grizzly law Ski rag ocument No. F00I ircraft Serial Number: ST Number: S0K These Instructions for ontinued irworthiness shall be included in the airplane Maintenance

More information

Right Triangle Trigonometry

Right Triangle Trigonometry ONDENSED LESSON 1.1 Right Tringle Trigonometr In this lesson ou will lern out the trigonometri rtios ssoited with right tringle use trigonometri rtios to find unknown side lengths in right tringle use

More information

REQUEST FOR COMMENTS

REQUEST FOR COMMENTS REQUEST FOR COMMENTS NEW UNIFORM STNDRD DRWING NUMER 217.S2, "RESIDENTIL CUR ND GUTTER R-TYPE"; MODIFICTIONS TO STNDRD DRWING NUMERS 223, 224, 226.S1, ND 227.S1 The Specifications Subcommittee of the Regional

More information

Hook-up Checklist for the Ranger PM7000 (EU)

Hook-up Checklist for the Ranger PM7000 (EU) Rnger Hook-up Cheklist for the Rnger (EU) Reserh Limited Reserh Limited Step 1. Estlish type of instlltion (e.g. no. of phses). Step 2. Estlish type of trnsduers (PTs, CTs et.). Step 3. Choose one of the

More information

Robot Control User Manual /0718-V01

Robot Control User Manual /0718-V01 Root Control User Mnul 0021919/0718-V01 2 CONTENT 1. INTRODUCTION... 4 2. PROGRAM DESCRIPTION... 4 3. SKR CONNECTION... 5 4. PROGRAM INSTALLATION... 6 5. DRIVER INSTALLATION... 6 6. MAIN SCREEN... 7 7.

More information

Energy saving ventilation Air handling units (Catalogue no. 2) Industrial and commercial ventilation. (Catalogue no. 1)

Energy saving ventilation Air handling units (Catalogue no. 2) Industrial and commercial ventilation. (Catalogue no. 1) Industril nd ommeril ventiltion (Ctlogue no. 1) Industril nd ommeril ventiltion omponents - fns for round nd retngulr duts, sound-insulted, xil nd roof fns, ir hndling units with het reovery, ir heting

More information

NON-TRAP PARASITIC ELEMENTS ELEMENT P-10 10M Reflector 39 10m Rear Driver 28 10M Front Driver 28 10M Director 24

NON-TRAP PARASITIC ELEMENTS ELEMENT P-10 10M Reflector 39 10m Rear Driver 28 10M Front Driver 28 10M Director 24 C B REINFORCEMENT TYPE P (SEE DWG. 140009) 36" P-10 COMPONENTS, DIMENSIONS: PRSITIC ELEMENTS REINFORCEMENT TYPE BE (SEE DWG.) B REINFORCEMENT TYPE BC SSY 140019 COMPONENTS, TRP SSEMBLY SLOT WITH SINGLE

More information

Workfit -SR, Dual Monitor Short Surface

Workfit -SR, Dual Monitor Short Surface User's Guide Workfit -SR, Dul Monitor Short Surfce Do not throw wy! Crdord locks needed for instlltion. Visit http://www.ergotron.com/workfi t-sr-instll for instlltion instructionl video. NOTE: 10 feet

More information

LOT 2 PEDRICK-ECKERD FILING NO. 3

LOT 2 PEDRICK-ECKERD FILING NO. 3 SITE WG NO. RWING TITLE LOT PERIK-EKER FILING NO. 67 SEURITY LV OLORO SPRINGS, O 809 OF TITLE SHEET OF EVELOPMENT PLN OF EVELOPMENT ETILS OF PRELIMINRY UTILITY N PULI FILITY PLN OF PRELIMINRY GRING PLN

More information

pge 2 Owner's Mnul for Thern 4WS nd 4HS Series Power Winhes Two-Yer Limited Wrrnty Plese reord the following: Dte Purhsed: Model No.: Seril No.: This

pge 2 Owner's Mnul for Thern 4WS nd 4HS Series Power Winhes Two-Yer Limited Wrrnty Plese reord the following: Dte Purhsed: Model No.: Seril No.: This Red this Own er s Mn u l thor ough ly e fore op er t ing the equip ment. Keep it with the equip ment t ll times. Re ple ments re vil le from Thern, In. IMPORTANT: Plese reord produt informtion on pge 2.

More information

Reef stainless steel channels

Reef stainless steel channels Reef stainless steel channels RETE EUTIFUL RRIER FREE THROOMS. designer stainless steel channels NEW TEHNOLOGY! Reef NNO RRIER NEW! REEFHNNEL.OM.U USTRLIN MDE THE REEF PROMISE: WITH OVER 30 YERS OF MNUFTURING

More information

TYPICAL CARRIAGEWAY SCALE - A3 SIZE

TYPICAL CARRIAGEWAY SCALE - A3 SIZE EXISNG SURFE LEVEL SURFE LEVEL m TYPIL. UP TO.m DEPENDENT ON WETHERING DEPTH OF PKIRI FORMON m TYPIL. UP TO 5.m DEPENDENT ON WETHERING DEPTH OF PKIRI FORMON TYPIL UT SEON REFER TO DEL R TYPIL FILL SEON

More information

POWER COMBICON feed-through plugs mm pitch DFK-PC 16/...-ST(F)-10,16

POWER COMBICON feed-through plugs mm pitch DFK-PC 16/...-ST(F)-10,16 feed-through plugs 0.6 mm pitch DFK-PC 6/...-ST(F)-0,6 If 6 mm conductor is used, the new feed-through plug connector offers the possibility to trnsfer current of 76 A from inside the device to outside

More information

Name Class Date SAMPLE. Complete the missing numbers in the sequences below. 753, ,982. The area of the shape is approximately cm 2

Name Class Date SAMPLE. Complete the missing numbers in the sequences below. 753, ,982. The area of the shape is approximately cm 2 End of term: TEST A You will need penil. Yer 5 Nme Clss Dte 1 2 Complete the missing numers in the sequenes elow. 200 3926 4926 400 500 700 7926 753,982 553,982 Estimte the re of the shpe elow. The re

More information

SAMPLE EVALUATION ONLY

SAMPLE EVALUATION ONLY mesurement nd geometry topic 15 Pythgors theorem 15.1 Overview Why lern this? Pythgors ws fmous mthemtiin who lived out 2500 yers go. He is redited with eing the fi rst person to prove tht in ny rightngled

More information

Bypass Compensator Cartridge, Size 16

Bypass Compensator Cartridge, Size 16 Bypss Compenstor Crtridge, Size 6 Q mx = 5 l/min, p mx = 42 br Direct cting, djustble compenstor spring Description These direct-cting bypss pressure-compenstor (hydrostt) crtridges, series DWDP-2B -6,

More information

ANATOMY OF A TRIPOD: Friction Lock (column) 8 Boots / Footwear. Friction Lock (Leg)

ANATOMY OF A TRIPOD: Friction Lock (column) 8 Boots / Footwear. Friction Lock (Leg) IMPORTANT DO NOT USE YOUR TRIPOD UNTIL YOU HAVE READ THESE INSTRUCTIONS. NO WARRANTY CLAIM WILL BE ENTERED INTO FOR THE MISUSE OR INCORRECT USE OF THESE PRODUCTS. ANATOMY OF A TRIPOD: We offer the three

More information

Factory-Built Grease Duct Systems. More Choices Best Value Code Compliant. June 2013 Edition. Design Manual

Factory-Built Grease Duct Systems. More Choices Best Value Code Compliant. June 2013 Edition. Design Manual Factory-uilt Grease Duct Systems 3G NEW NE ER L O ZER More hoices est Value ode ompliant June 2013 Edition Design Manual Making The Right DESRIPTION INSTLLED SPE REQUIREMENTS 12" X 12" SQURE DUTS - 144

More information

TL VISUAL LEVEL C/C DISTANCE MM

TL VISUAL LEVEL C/C DISTANCE MM VISUL LEVEL The visual level gauges allow the liquid level to be checked in a clear and precise way at any time, in addition to the possibility of having electric signals. 8 TL VISUL LEVEL / DISTNE 76-27-254

More information

Apply the Law of Sines. You solved right triangles. You will solve triangles that have no right angle.

Apply the Law of Sines. You solved right triangles. You will solve triangles that have no right angle. 13.5 pply te Lw of Sines TEKS.1,.4, 2.4.; P.3.E efore Now You solved rigt tringles. You will solve tringles tt ve no rigt ngle. Wy? So you n find te distne etween frwy ojets, s in Ex. 44. Key Voulry lw

More information

HORIZONTAL SLIDER - NON-IMPACT

HORIZONTAL SLIDER - NON-IMPACT 73 /" 72" MX. UNIT 7 7/8" MX. SSH /" GLSS LO HORIZONTL SLIER - NON-IMPT 3" MX. SSH WITH /" GLSS LO X 75 /" WITH 7" MX. UNIT WITH O 3" MX. SSH WITH /" GLSS LO 75 /" WITH 7" MX. UNIT WITH GENERL NOTES:.

More information

Chapter 31 Pythagoras theorem and trigonometry (2)

Chapter 31 Pythagoras theorem and trigonometry (2) HPTR 31 86 3 The lengths of the two shortest sides of right-ngled tringle re m nd ( 3) m respetively. The length of the hypotenuse is 15 m. Show tht 2 3 108 Solve the eqution 2 3 108 Write down the lengths

More information

Coroutines in Propeller Assembly Language

Coroutines in Propeller Assembly Language www.prllxsemiondutor.om sles@prllxsemiondutor.om support@prllxsemiondutor.om phone: 916 632 4664 fx:916 624 8003 pplition Note oroutines in Propeller ssemly Lnguge strt: The multiore P8X32 does not require

More information

NMSU PROJ #3077 STORAGE FACILITY - PHASE 3 BUILDING C (384)

NMSU PROJ #3077 STORAGE FACILITY - PHASE 3 BUILDING C (384) 2 SEPT 26, WG PROJET NO: OWNER: NEW MEXIO STTE UNIVERSITY NMSU PROJ #3077 STORGE FILITY - PHSE 3 UILING (384) RWING INEX: GENERL G00 OVER SHEET NMSU STORGES PHSE 3 RESERH R. LS RUES, NM 8800 780 E UNIVERSITY

More information

Hot-Air Blowers 12 / / Hot-Air Blowers

Hot-Air Blowers 12 / / Hot-Air Blowers Hot-Air Blowers MISTRAL HOTWIND PREMIUM / HOTWIND SYSTEM MISTRAL Accessories HOTWIND Accessories VULCAN SYSTEM VULCAN SYSTEM Accessories IGNITER BM4/BR4 IGNITER BM4/BR4 Accessories 12 / 13 14 / 15 16 17

More information

Geometry. Trigonometry of Right Triangles. Slide 2 / 240. Slide 1 / 240. Slide 4 / 240. Slide 3 / 240. Slide 6 / 240.

Geometry. Trigonometry of Right Triangles. Slide 2 / 240. Slide 1 / 240. Slide 4 / 240. Slide 3 / 240. Slide 6 / 240. Slide 1 / 240 New Jersey enter for Tehing nd Lerning Progressive Mthemtis Inititive This mteril is mde freely ville t www.njtl.org nd is intended for the non-ommeril use of students nd tehers. These mterils

More information

16" SS CABLE TEE POST 1) STAINLESS STEEL* (STANDARD) *ALL SS IS #6 SATIN FINISH (#8 MIRROR FINISH UPON REQUEST) 2) PVD COATING

16 SS CABLE TEE POST 1) STAINLESS STEEL* (STANDARD) *ALL SS IS #6 SATIN FINISH (#8 MIRROR FINISH UPON REQUEST) 2) PVD COATING RILING OPTIONS ) Ø 2" or 2" SS* 2) Ø 2" WOOD CHERRY RED OK WHITE OK MPLE 3) Ø 2" LED iril 6" SS CBLE 4" MX 3'6" TEE POST ) STINLESS STEEL* (STNDRD) *LL SS IS #6 STIN FINISH (#8 MIRROR FINISH UPON REQUEST)

More information

Saf-T Vent EZ Seal Plus

Saf-T Vent EZ Seal Plus Technical and Dimensional Data Saf-T Vent EZ Seal Plus Single Wall L 29-4 Stainless Steel Special Gas Vent Tested and Listed to UL 1738/UL S636 by Underwriters Laboratories, Inc 5030 orporate Exchange

More information

CENTRIFUGAL AERATION FANS

CENTRIFUGAL AERATION FANS CENTRIFUGL ERTION S LIFTING LUGS OR RINGS ON LL SIZES. NOTES: 1. LL DIMENSIONS RE IN INCHES. 2. ROTTIONS RE CW (CLOCKWISE) OR CCW (COUNTER CLOCKWISE). 3. OUTLET CN BE POSITIONED S UP-BLST, DOWN-BLST, TOP-HORIZ.,

More information

RECTANGULAR CONNECTORS

RECTANGULAR CONNECTORS RETNGULR ONNETORS FN360 Series FN-365P FN-365J FN-364P FN-364P FN-364J FN-364J FN-365P FN-365J FN-364P FN-364J FN-362J FN-363J FN-365P FN-367J FN-365P FN-364P FN-361P With type cover FN-365J FN-364P With

More information

MATHEMATICAL PRACTICES In the Solve It, you used what you know about triangles to find missing lengths. Key Concept Law of Sines

MATHEMATICAL PRACTICES In the Solve It, you used what you know about triangles to find missing lengths. Key Concept Law of Sines 8-5 -20-5 Lw of Sines ontent Stndrds G.SRT.11 Understnd nd ppl the Lw of Sines... to find unknown mesurements in right nd non-right tringles... lso G.SRT.10 Ojetives To ppl the Lw of Sines 66 ft 35 135

More information

VENTS SERIES DOMESTIC ELECTRIC FANS. User s Manual

VENTS SERIES DOMESTIC ELECTRIC FANS. User s Manual VENTS SERIES OMESTIC ELECTRIC FANS User s Mnul 008 ESIGNATION BASIC SPECIFICATIONS "VENTS" fns re designed for ventiltion of domesti nd similr premises (prtments, offies, stores, grges, kithens, throoms,

More information

THERMOFLO FLUID PUMPS& SYSTEMS THERMOFLO FOR HEATING, COOLING AND WATER SUPPLY APPLICATIONS TO BS7074 SEALED SYSTEMS EXPANSION VESSELS PRESSURIZERS

THERMOFLO FLUID PUMPS& SYSTEMS THERMOFLO FOR HEATING, COOLING AND WATER SUPPLY APPLICATIONS TO BS7074 SEALED SYSTEMS EXPANSION VESSELS PRESSURIZERS THERMOFLO S E A L E D S Y S T E M S THERMOFLO SEALED SYSTEMS FOR HEATING, COOLING AND WATER SUPPLY APPLICATIONS TO BS7074 EXPANSION VESSELS PRESSURIZERS PUMPS& SYSTEMS WALL OR BASE MOUNTING PRESSURIZERS

More information

S110 Steel Level Panel Installation Instructions

S110 Steel Level Panel Installation Instructions S110 Steel Level Panel Installation Instructions NOTE: Fairway Architectural Railing Solutions will not be held liable for incorrect or unsafe installations by installer. It is the installer s resposibility

More information

CLEANROOM GEL GRID CEILING SYSTEM PRODUCT DATA Division

CLEANROOM GEL GRID CEILING SYSTEM PRODUCT DATA Division 5023 HAZEL JONES ROAD, BOSSIER CITY, LA 71111 888.315.1561 800.877.8746 FAX SALES@GORDONCLEANROOM.COM GORDONCLEANROOM.COM AN EMPLOYEE OWNED COMPANY CLEANROOM GEL GRID CEILING SYSTEM PRODUCT DATA Division

More information

300lb MALLEABLE FITTINGS

300lb MALLEABLE FITTINGS NIPPLES & FITTINGS MLLEBLE FITTINGS MLLEBLE FITTINGS MLLEBLE FITTINGS ISO 9002 - CERTIFICTE OF QULITY - UL/ LISTED ND PPROVED T 300 PSI Our quality fittings are made with care and attention to detail.

More information

Factory-Built Grease Duct Systems. More Choices Best Value Code Compliant. June 2013 Edition. Design Manual

Factory-Built Grease Duct Systems. More Choices Best Value Code Compliant. June 2013 Edition. Design Manual GRESE DUT Submittal no. This document has been reviewed for general conformance with contract documents. This review does not relieve the subcontractor or supplier of responsibility for adherence to the

More information

Lesson 8: Application Technology

Lesson 8: Application Technology The type of ppliction equipment used must suit the type of ppliction. In this module, you ll lern the prts of the most common types of ppliction equipment used by ssistnt pplictors, s well s how to properly

More information

LK4420BFFR - FTN, 4420BFFR - FTN. Owners Manual

LK4420BFFR - FTN, 4420BFFR - FTN. Owners Manual Owners Manual 4420 Bottle Filler Freeze Resistant Tubular Fountain with 98837C or 98838C Dual Valve Control ssembly MODEL 4420BF1LFR MODEL 4420BF1UFR MODEL 4420BF2FR ITLLER 4420BFFR Fountains are among

More information

HCI Examination Please answer in Swedish or English

HCI Examination Please answer in Swedish or English HCI Exmintion 02.06.04 8.45-12.45 Plese nswer in Swedish or English PLEASE HAND IN FIRST PAGE OF EXAMINATION SHEET (TES) IF YOU ANSWER MULITPLE CHOICE HERE PART I: NECESSARY FOR PASS (GODKÄNT) 1. Multiple

More information

Inverted POWER COMBICON feed-through plugs mm pitch DFK-IPC 16/...-ST(F)-10,16

Inverted POWER COMBICON feed-through plugs mm pitch DFK-IPC 16/...-ST(F)-10,16 .6 mm pitch DFK-IPC 6/...-ST(F)-,6 In the inverted versions of the DFK-IPC 6 feed-through connectors, the screw connection on the device side is designed with femle insted of mle contcts.this gives touch-proof

More information

The Pythagorean Theorem and Its Converse Is That Right?

The Pythagorean Theorem and Its Converse Is That Right? The Pythgoren Theorem nd Its Converse Is Tht Right? SUGGESTED LEARNING STRATEGIES: Activting Prior Knowledge, Mrking the Text, Shred Reding, Summrize/Prphrse/Retell ACTIVITY 3.6 How did Pythgors get theorem

More information

ALLMATIC CENTRO GRIPP FOR CENTRAL GRIPPING

ALLMATIC CENTRO GRIPP FOR CENTRAL GRIPPING 186 186 ALLMATIC CENTRO GRIPP FOR CENTRAL GRIPPING Our ll-rouner stns out for its super preision n urility. Centrl lmping of workpiee for onventionl lmping n lmping of unmine prts. Iel for five-sie mining.

More information

Dual Monitor Desk Mount

Dual Monitor Desk Mount Dul Mnitr Desk Munt Instructin Mnul SKU: STAND-V002 Scn the QR cde with yur mbile device r llw the link r helpul vides nd speciictins relted t this prduct. https://viv-us.cm/prducts/stnd-v002 help@viv-us.cm

More information

Owner s Manual For 5122 Series Portable Davit Cranes ORIGINAL TEXT

Owner s Manual For 5122 Series Portable Davit Cranes ORIGINAL TEXT Red this Owner s Mnul thoroughly efore operting the equipment. Keep it with the equipment t ll times. Replcements re ville from Thern, Inc., PO Box 347, Winon, MN 55987, 507-454-2996. www.thern.com IMPORTANT:

More information

MISSISSIPPI RIVER SPILLWAY PLAN (2013 FLOOD RECOVERY) MISSISSIPPI RIVER SPILLWAY PROFILE (2013 FLOOD RECOVERY) C-200 PROJECT BOUNDARY

MISSISSIPPI RIVER SPILLWAY PLAN (2013 FLOOD RECOVERY) MISSISSIPPI RIVER SPILLWAY PROFILE (2013 FLOOD RECOVERY) C-200 PROJECT BOUNDARY c:\pw_working\mvr\b5eddlh\d032060\_-200xxx.dgn $TE$ 5E 9:6:5 M N 37+00 372+00 373+00 37+00 PO N 3397.37 E 23639.0 535.90 537.6 535.8 535.27 535.2 535.07 H:V 50H:V 375+00 5H:V 376+00 5H:V H:V 3H:V PROJET

More information

City of Rio Rancho Department of Public Works

City of Rio Rancho Department of Public Works P -E L P -C L P -H L C P -B L C MULTIPLE CHNNELS ORIENTTION MULTIPLE CHNNELS ORIENTTION 2 MULTIPLE CHNNELS ORIENTTION 1 P -B L P -E L P L -C P L -H P - L B B SINGLE CHNNEL ORIENTTION SINGLE CHNNEL ORIENTTION

More information

ENGINE/ PUMP ADAPTERS

ENGINE/ PUMP ADAPTERS ENGINE/ PUMP PTERS Hayes Manufacturing, Inc. Fife Lake, MI 9633 Phone: 23-879-3372 Fax: 23-879-330 TRNSMISSION PROUTS Fife Lake, MI 9633 Phone: 23-879-3372 Fax: 23-879-330 Table Of ontents Engine/ Mount

More information

Grand Espresso Corner Kitchen

Grand Espresso Corner Kitchen Please retain this information for future reference PRTS LIST To order replacement parts, please visit 1 2 3 4 6 5 7 8 9 10 11 12 13 19 22 16 17 18 20 23 24 25 14 15 21 26 28 30 31 32 33 29 34 36 37 27

More information

How To Demonstrate Guide E24 & E26

How To Demonstrate Guide E24 & E26 Pre-Demonstrtion Checklist Clen the entire mchine Chrge tteries Check squeegee ldes Bring proper rushes nd/or pds Clening cost nlysis Prepre quottion with lese pyments E24 & E26 literture nd fct sheet

More information

Ford Service Saddles and Tapping Sleeves

Ford Service Saddles and Tapping Sleeves Section AA 5/2001 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487

More information

1. Attach beams to different parts of the playset.

1. Attach beams to different parts of the playset. MORE WAYS + Prt No.: To uild different set-ups: Plese keep these instrutions for future referene s they ontin importnt informtion. Atth ems to different prts of the plyset. A A # olors: Pper Stok: Pper

More information

TeeJay Publishers Homework for Level C book Ch 12 - Length & Area

TeeJay Publishers Homework for Level C book Ch 12 - Length & Area Chpter 12 Exerise Perentges 1 Length & Are 1. Would you use ruler, tpe mesure or r odometer to mesure : your tehers height the length of 5 note the length of your edroom d the distne from Glsgow to Crlisle?

More information

FREESTANDING WOOD FIRES

FREESTANDING WOOD FIRES FREESTNDING WOOD FIRES F12000HW - USTRLI 2013 Item No. MRKET FUEL TYPE FINISH YER FN 995957 Charcoal VHT Paint U HRDWOOD SEP-2013 Yes 995958 Matt Black Enamel IPL No. : 999173 Issue: Date: Page: 1 of 11

More information

ARIAKON OWNER S MANUAL READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS IN THIS MANUAL BEFORE USING THIS PAINTBALL MARKER.

ARIAKON OWNER S MANUAL READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS IN THIS MANUAL BEFORE USING THIS PAINTBALL MARKER. RIKON Thank You for choosing RIKON SIM-5 SERIES.68 CLIER PINTLL MRKER (SIM-5. SIM-5 PRO, SIM-5 PRO ELITE) RIKON 2794 LOKER VE WEST SUITE 107 CRLSD C 92010 1-877-4-RIKON 760-268-0735 FX 760-268-0736 On

More information

Instructions. Electronic Aquarium Water Change System. Replenishing Water. Extracting Water. Includes instructions for:

Instructions. Electronic Aquarium Water Change System. Replenishing Water. Extracting Water. Includes instructions for: Instructions Electronic Aqurium Wter Chnge System Includes instructions for: Replenishing Wter Extrcting Wter INTRODUCTION WHAT S INCLUDED The Aquplenish Wter Chnger conditions, monitors nd replenishes

More information

St Ac Ex Sp TOPICS (Text and Practice Books) 4.1 Triangles and Squares Pythagoras' Theorem - -

St Ac Ex Sp TOPICS (Text and Practice Books) 4.1 Triangles and Squares Pythagoras' Theorem - - MEP: Demonstrtion Projet UNIT 4 Trigonometry N: Shpe, Spe nd Mesures e,f St Ex Sp TOPIS (Text nd Prtie ooks) 4.1 Tringles nd Squres - - - 4. Pythgors' Theorem - - 4.3 Extending Pythgors' Theorem - - 4.4

More information

* LANDING ROLLED CURB SIDEWALK RAMP TYPE R (ROLLED SIDES) * LANDING ** RAMP FULL CURB HEIGHT MAY BE REDUCED TO ACCOMMODATE MAXIMUM SIDE FLARE SLOPE

* LANDING ROLLED CURB SIDEWALK RAMP TYPE R (ROLLED SIDES) * LANDING ** RAMP FULL CURB HEIGHT MAY BE REDUCED TO ACCOMMODATE MAXIMUM SIDE FLARE SLOPE * MXIMUM LNDING IS 2.0% IN ECH DIRECTION OF TRVEL. LNDING MINIMUM DIMENSIONS 5' x 5'. ** MXIMUM RMP CROSS IS 2.0%, RUNNING 5% - 7% (8.3% MXIMUM). "NON-WLKING" RE * LNDING 24" CROSS FULL WIDTH PERMNENT

More information

5.5 The Law of Sines

5.5 The Law of Sines 434 HPTER 5 nlyti Trigonometry 5.5 Te Lw of Sines Wt you ll lern out Deriving te Lw of Sines Solving Tringles (S, S) Te miguous se (SS) pplitions... nd wy Te Lw of Sines is powerful extension of te tringle

More information

Welded Terminal to Three NEMA Pads Pipe ending going to three NEMA pads. Part is designed to be corona free for 345 kv and 500 kv service.

Welded Terminal to Three NEMA Pads Pipe ending going to three NEMA pads. Part is designed to be corona free for 345 kv and 500 kv service. ouplers ouplers YPE WRP3-8-V- Welded erminal to hree NEM Pads Pipe ending going to three NEM pads. Part is designed to be corona free for 345 kv and 500 kv service. luminum lloy 11 2 7 3/8 30 USOMER PIPE

More information

FairwayRailing.com

FairwayRailing.com FairwayRailing.com 1-800-598-5245 CONTENTS CELLULAR PVC RAILING pages 6-7 product line color code ALUMINUM RAILING pages 8-9 product line color codes COMPOSITE RAILING pages 10-11 product line color code

More information

INVESTIGATION 2. What s the Angle?

INVESTIGATION 2. What s the Angle? INVESTIGATION 2 Wht s the Angle? In the previous investigtion, you lerned tht when the rigidity property of tringles is comined with the ility to djust the length of side, the opportunities for useful

More information

- Written price quotations are valid for 30 days from the date of the quote unless otherwise noted.

- Written price quotations are valid for 30 days from the date of the quote unless otherwise noted. SPECIFICATIONS - All material is solid brass with a #8 mirror finish unless otherwise noted. - All material sold by length is priced in one foot increments. ORDERING PROCEDURE - Use a Purchase Order number.

More information

Football Equipment. 5 9/16" Gooseneck Goalposts

Football Equipment. 5 9/16 Gooseneck Goalposts 5 9/16" Gooseneck Goalposts Football Equipment FB55CG 5 9/16" Gooseneck College Goalposts Applies also to FB55CG-SY and FB55CG-WT Goalposts shall meet all NCAA rules. Goalposts shall be of the single bent

More information

A COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32

A COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32 A COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32 Component Flat Washers Component Flat Washers The Largest Selection in the World! Steel, Stainless Steel and Brass The standard Flatwasher

More information

The TYCO Model PRV-1 Pressure. Reducing Valves described herein must be installed and maintained in compliance with this document and with the

The TYCO Model PRV-1 Pressure. Reducing Valves described herein must be installed and maintained in compliance with this document and with the Worldwide www.tyco-fire.com Contacts Model PRV-1 Pressure Reducing Valve Pilot Operated, Globe and ngle ody Styles General Description The TYCO Model PRV-1 Pressure Reducing Valves, 2 through Inch (DN5

More information

diaphragm In-line service One pilot valve sub-assembly provides for any outlet set pressure, that is, 80 to 225 psi (5,5 to 15,5 bar)

diaphragm In-line service One pilot valve sub-assembly provides for any outlet set pressure, that is, 80 to 225 psi (5,5 to 15,5 bar) Worldwide www.tyco-fire.com Contacts Model PRV-1 Pressure Reducing Valve Pilot Operated, Globe and ngle ody Styles General Description The TYCO Model PRV-1 Pressure Reducing Valves, 2 through in. (DN5

More information

Preferred Instruments Danbury, CT USA

Preferred Instruments Danbury, CT USA Tank Level Sensor Model TG-EL-WF-xx Installation & Operation Instructions SDI-TG-EL-WF March 6, 2006 Preferred Instruments Danbury, CT USA www.preferredinstruments.com CONTENTS Installation Pg. 2 Calibration

More information

Extension Platform. Base Platform. Crossover. Exit railing. Exit Railing

Extension Platform. Base Platform. Crossover. Exit railing. Exit Railing Base Platform Galvanized With metal grate and two brackets Railing on the long side and a face side Extension Platform Galvanized With metal grate and one bracket Railing on the long side with rail connection

More information

SO 9001 I ACCESSORIES

SO 9001 I ACCESSORIES ISO 9001 ESSORIES ESSORIES INDEX Page In-Line Mounted Flow ontrol Valves 3 In-Line Mounted heck Valves 3 Quick Exhaust, heck and Shuttle Valves In-Line Ported Lockout Valves 5 Mufflers 6 Fittings 7-9 2

More information

MANUAL ROLLER SHADE MANUAL ROLLER SHADES SHADE SIZES & WEIGHTS: BRACKET PROJECTIONS:

MANUAL ROLLER SHADE MANUAL ROLLER SHADES SHADE SIZES & WEIGHTS: BRACKET PROJECTIONS: MNUL ROLLER SHDE MNUL ROLLER SHDES (R, R & G0) (R, R & G0) STNDRD OMPONENTS:. Fabric. Roller Tube Dimensions: R.............. /" Diameter R............ /" Diameter R............... " Diameter G0...........

More information

Stettler Shop and Office

Stettler Shop and Office 0 00 00 GENERL REQUIREMENTS. THIS PROJET IS EING ONSTRED UNDER THE DESIGN/UILD PROJET DELIVERY.. FOR THE PURPOSES OF THE OTIONL HELTH ND SFETY T, THE PRIME ONTRTOR FOR THE WORK SITE WILL E THE DESIGN/UILDER

More information

SERIES 2 RAMP OWNER S MANUAL TOOLS REQUIRED: BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup.

SERIES 2 RAMP OWNER S MANUAL TOOLS REQUIRED: BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup. SERIES 2 RAMP OWNER S MANUAL BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup. Use caution and care for your back when lifting, pushing, pulling, folding or unfolding

More information