Question 1. Question 2

Size: px
Start display at page:

Download "Question 1. Question 2"

Transcription

1 Survey Invitations Results Filtering Invitations Sent: 0 Invitations Accepted: 0 Untracked Responses: 94 Total Responses Received: 94 invitations & send reminders Select Used >10% CV Adapters Edit Delete Add Filter Question 1 Approximately how many taps did you have during the 2010 sugaring season? Range: (100 to 13000) Average: Median: 1300 Total responses: 53 Mode: 400 Show values Question 2 Where are you from (State or Province)? Text Answers (15) Maine Maine Vermont Vermont Vermont ohio Connecticut West Virginia Maine nh New Hampshire VT

2 ma. New York NY, St Lawrence County Expand >> Question 3 What was your approximate yield in SAP (gallons) per tap this year? gal sap/tap 6 11% gal sap/tap 10 19% gal sap/tap 12 23% gal sap/tap 7 13% gal sap/tap 11 21% gal sap/tap 4 8% 30.0 or more gal sap/tap 3 6% Question 4 How would you describe your sap yield this year? Way less than average 12 23% Less than average 17 32% Average 14 26% More than average 7 13% Way more than average 3 6% Question 5 How would you describe your sap sugar content (Brix) this year? Way lower than average? 6 11% Lower than average? 25 47% Average? 20 38% Higher than average? 2 4% Way higher than average? 0 0%

3 Question 6 How would you describe the amount of sugar sand (niter) this year? Way lower than average? 1 2% Lower than average? 8 15% Average? 31 58% Higher than average? 11 21% Way higher than average? 2 4% Question 7 Do you use Reverse Osmosis? If yes, how high do you concentrate to? Don't use Reverse Osmosis 17 33% Concentrate to 5-7 Brix 5 10% Concentrate to 8-10 Brix 14 27% Concentrate to Brix 11 22% Concentrate to Brix 4 8% Concentrate above 20 Brix 0 0% Question 8* What was the size of the majority of the spouts you used? 7/16" 2 4% 5/16" 45 85% 19/64" 6 11% Other 0 0% Question 9 Were the majority of your spouts

4 Clear-straight-through spouts (CST) 0 0% Metal (stainless) 1 2% One-piece plastic with a 90 deg bend 9 17% Two-piece plastic (Stubby & Adapter) with a 90 deg bend 10 19% Two-piece plastic (Stubby & Adapter) straight through 1 2% 7/16" Spout with a new adapter 0 0% Check-valve spouts 32 60% Question 10 If you use Clear-straight-through spouts or replaceable spout adapters, do you Replace them each year 28 78% Clean them in the woods and reuse them each year 0 0% Bring them out of the woods and clean/reuse them each year 5 14% Replace them after 1-2 years of use 2 6% Replace them after 3-4 yrs of use 1 3% Replace them after 5+ yrs of use 0 0% Not replace them 0 0% Question 11 How old are the majority of your mainlines? New this year 5 9% 1-2 Yrs Old 12 23% 3-5 Yrs Old 19 36% 6-10 Yrs Old 13 25% Over 10 Yrs Old 4 8% Question 12 How old are the majority of your lateral lines?

5 New this year 5 9% 1-2 Yrs Old 12 23% 3-5 Yrs Old 24 45% 6-10 Yrs Old 12 23% Over 10 Yrs Old 0 0% Question 13 How old are the majority of your droplines? New this year 12 23% 1-2 Yrs Old 18 34% 3-5 Yrs Old 16 30% 6-10 Yrs Old 7 13% Over 10 Yrs Old 0 0% Question 14 Did you replace any droplines this year? If so, in what percentage of your operation did you replace droplines? Did not replace any droplines (except some repairs) 20 39% Less than 10% 8 16% 10-25% 6 12% 26-50% 8 16% 51-75% 3 6% % 6 12% Question 15 How old are the majority of your spouts New this year 32 62% 1-2 Yrs Old 10 19%

6 3-5 Yrs Old 6 12% 6-10 Yrs Old 4 8% Over 10 Yrs Old 0 0% Question 16 Gravity or vacuum? Buckets 0 0% Gravity Tubing 5 9% Vacuum - Less than 15" Hg 0 0% Vacuum 15-19" Hg 10 19% Vacuum 20-24" Hg 23 43% Vacuum 25+"Hg 15 28% Question 17 What improvements to your sap collection system do you plan to make for next season? (Check all that apply) Add more taps 32 23% Add vacuum to a system currently without vacuum 9 7% Increase vacuum level above what I had this year 16 12% Reduce # taps on lateral lines (on vacuum system) 13 9% Use new spout adapters 8 6% Use Clear-straight-through spouts 0 0% Use Check-valve spouts 28 20% Replace some old droplines with new droplines 16 12% Replace some old lateral line with new lateral line 13 9% Other 3 2% ID If We fall tapped 10,000 out of 12,000 - starting on Nov 15th last year. We only retapped 7,000 of those. The remaining 3,000 ran well until the 60 degree weather in Mid March - then they shut down significantly. Those were 1/4" CSTs. Our sap yield would've b Survey none converted 5060 taps to CV's this year. Plan to replace 1400 CDL 3 year old spout adapters with

7 Leader check valves in plan to use quick disconnects on all droplines, that way spouts and drops can be taken in and sterilized as i will do with the check valves I can get the money replace remaing defective Leader tubing tighten up latterals, reduce sap standing in lines Bigger vacuum pumps and increase mainline sizes use a new set of check valve adapters Question 18 What is the minimum size tree you tap (diameter in inches)? Range: 11 (5 to 16) Average: 9 Median: 9 Total responses: 52 Mode: 8 Show values Question 19 What is the minimum size tree you put a second tap in (diameter in inches, if you only use one tap, put 0)? Range: 18 (12 to 30) Average: Median: 20 Total responses: 43 Mode: 20 Show values Question 20 Did you ream tapholes this year? If so, did it help? Didn't ream 52 98% Reamed didn't help 0 0% Reamed helped a little 1 2% Reamed helped a lot 0 0%

8 Question 21* Did you try the Leader Check-Valve Spout this season? Yes % No 0 0% Question 22 If you tried the Leader Check-Valve Spouts, what % of your taps did you put these on? Didn't try them 0 0% Just a couple 0 0% 5-10% 0 0% 11-25% 7 13% 26-50% 8 15% 51-75% 9 17% % 29 55% Question 23 If you tried the Leader Check-Valve Spouts, did you put them on new or used drops? Didn't try them 0 0% All on new drops 20 38% All on used drops (1-5 Yrs old) 11 21% All on used drops (6+ Yrs old) 8 15% Some on new some on old drops (drops 1-5 Yrs Old) 10 19% Some on new some on old drops (drops 6+ Yrs Old) 4 8% Question 24 Did you experience any of the following issues with the Leader Check-Valve Spout Adapters?

9 (Multiple responses are allowed for this question) Didn't try them 0 0% Spout adapters broke more than usual when tapping 11 18% Cage broke and ball came out when tapping 20 32% Ball got sucked down lateral line 9 15% Balls found in releaser 1 2% Had to reseat them more than other types of spouts 11 18% Other 10 16% ID If other, please note issue Survey no problems on gravity tubing Issue with stubby falling of CV spout during hard freezes discovered many of my spouts would not seat well in the check valves Ball came out when hammering into tree, 5% reseat cv into stubbie check valves seemed to bend and conform to that bent shape many stuck open with wood chips. Need to clean holes better gumed up so some were not functioning no negative issues We had several stuck in the open position Expand >> Question 25 Compared to other spouts in my woods or neighbors wood, in terms of sap yield, do you feel the Check-Valve Spout Adapter Didn't use 0 0% Yielded a lot less than a regular spout 0 0% Yielded less than a regular spout 1 2% Yielded about the same as a regular spout 6 12% Yielded a little more sap (up to 10%) 11 22% Yielded a good amount more sap (11-25%) 15 30% Yielded a lot more sap (26-50%) 14 28% I was drowning in sap (51%+) 3 6% Question 26

10 Do you feel that the Check-Valve Spout Adapter Didn't use 0 0% Flowed for a lot shorter time than my other spouts or my neighbors spouts 1 2% Flowed for a shorter time than my other spouts or my neighbors spouts 1 2% Flowed about the same amount of time as my other spouts or my neighbors spouts 5 10% Flowed a little longer (1-2 days) than my other spouts or my neighbors spouts 12 23% Flowed a lot longer (3-7 days) than my other spouts or my neighbors spouts 13 25% Flowed after all other spouts had stopped 16 31% They're still running 4 8% Question 27 Next season I'll Not consider trying the Check-Valve Spout 0 0% Try the Check-Valve Spout for the first time 0 0% Stop using Check-Valve Spout Adapters 1 2% Use them in about the same percentage as this year 6 11% Increase the percentage of Check-Valve Spouts in my operation 14 26% Put Check-Valve Spouts throughout my operation 10 19% I had Check-Valve Spouts in all my operation this year and will again next year 22 42% Question 28 This year I tapped Way too early (more than 2 wks before the sap ran) 0 0% Very early (about 2 wks before the sap ran) 3 6% Early (a week before the sap ran) 9 17% Right on time 19 36% A bit late (1-7 days after the sap ran) 19 36% Really late (more than a week after the sap ran) 3 6% Still haven't finished tapping 0 0%

11 Question 29 For me, the advantages of Check-Valve Spouts are I didn't use Check-Valve Spout Adapters 0 0% Allows me to tap earlier without losing yield 19 16% Takes away the uncertainty of when I should tap 19 16% Provides me more sap 32 28% Provides a higher income for same number of trees 25 22% Keeps me from having to change drops or lateral lines 15 13% Other 6 5% ID If "Other", please specify Survey allows me to shut off my vacuum at night or when saps not running and the holes stay clean hard to tell on a short season will try check valve spouts again next year,so far not impressed! Our system is fairly new and tight - and we have liquid ring pumps with VFDs - so they stay on all the time. The advantage we see with CVS are the quick freezes (laterals before trees) and the unforeseen (pump failure, lateral damage due to squirrel, weath Season ended too soon to see full benefits hopeing that sap would not get sucked back into the tree Seemed to keep running longer during an unusally warm season. Would have tapped earlier if I could. Question 30 In terms of sap yield, did you feel you Didn't get your $ worth out of the Check-Valve Adapters 5 9% About broke even 9 17% Got my $ worth 17 32% Got more than what I paid for them 13 25% Got way more than what I paid for them 9 17% Question 31 If a Clear-Straight Through Spout (CST) were available with a Check-Valve, would you

12 Prefer the original version that fits a Stubby 19 36% Prefer a Clear-Straight-Through version Check-Valve 9 17% No preference 25 47% Won't try either type 0 0% Question 32 Would you recommend to your friends who are sugarmakers that they try the Check-Valve Spouts? Yes 51 96% No 2 4% Question 33 Do you have any suggestions for research projects we should consider? Be specific. Text Answers (15) Performance at different vacuum levels. Also turning vacuum on and off during warm period, how will it affect the performance. We are prone to extended periods of warm weather in Ohio. I'd like to know if there are any means to extending early sap runs by doing things like making artificial snow and creating a deep snow pack in a sugar bush. Southern New England does not usually see more than a foot or two on the ground come March so I Test niter levels in red maples vs sugar. maples from same bush Consumer taste test on RO syrup low conc, high conc and no ro syrup -effects of larger diameter tree to tree tubing, that allows sap to break inside line and flow, therefore transferring vacuum to each tap hole more effectively.- get them so they separate from the stubby easier I know there was something I had wished had more research on but I can't recall it at the moment check spouts need work. we had a bad season & had balls sucked down lateral to totally stop flow of sap. Don't know how for how long & how much sap we lost due to plugged laterals. comparison of vacuum pumps. LR, vane, water, oil cooled. See which one maintains high vacuum best as leaks develop. effect of high vacuum on small trees( I would like to see some studies with washing the line with the tap still in the tree on a check valve system and a study on the pressure load of the system by pressurizing the system and seeing at what pressure the check valve or the connection between th 1.Clean vs not clean sap lines. ie: water cleaned lines end up with green algae vs vinegary sap without algae. 2.Effect of tree gases on vacuum. I had low vacuum at end of season with little sap and lots of gas. 3.Reason for low sugar content this year. Found them to be very sharp on your hands when being removed. Need to find a better way of holding ball in adapter. I for one would like to know more about leaving mainline and laterals out in the sugarbush

13 year after year, it seems when a complete new system is installed, the first year is pristine, its all "down hill " from there the sap quality gets worse no matter h Just keep doing what your doing. If there is a way to make the check valve spouts cheaper and better that would be great. We had a bit of an issue with a few spouts cracking and breaking, but percentage wise it would be a fraction of a percent. Perhaps y A better locking system for the CV and stubby. I am hoping research was done with cv's on gravity so I can compare my results. Expand >> Question 34 Do you have any other comments? Text Answers (15) The CVA's preformed as represented. Especially the last week of March, when we had a very good run. However, this was a very short season. I will be watching how they perform over a long season. Also we had to change vacuum pumps half way through the seaso This is a bad year to judge the check valve adapters, at least here in Connecticut. The season started out frozen longer than usual then it turned incredible warm for too long and we had too few freezing nights. I made only 9 gallons of syrup on 400 taps I usually tap the 1st week in Feb. Due to deep snow that wasn't possible. I can not wait to see how CV's will work when I have a normal start time and whether they will run over six weeks. My guess is that they will run beyond 6 weeks and that is just what Keep up the great work Dr. Perkins! Used 3700 check valves on 5-10 yr tubing " vac. tapped those trees last. sap flow decreased significantly 1 week earlier than other 8000 taps. turned pump off one day earlier than other 8000 taps. Yeild on CV spouts.33 gal/ tap. (same average we hav overall happy, but they did gum up. You add a lot of knowledge to this site We will try check vavle spouts 1 more year, then decide weather they are worth the time, so far not! check valves need a little tweaking in how they fit with the new Leader stubbies. Separated difficulty during cleaning. I really appreciate all info posted by Dr Perkins and proctor research center. I am extremely interested in new high sap yielding technology such as cv adapters and any other new technology. The ball in the cv adapter does seem to get stuck in the multifit it was really hard to rate the cvs this year. reasons 1 i have 50 taps on buckets and never got a good run all season 2 if i had not had vac i would not have made any syrup at all Please if its not too much trouble publish the results of this survey on your website and announce the publication on mapletrader.com Like the idea however the season was short and warm and we left our vacuum on for longer then normal each day or didn't shut it off for over a week at a time. I don't see much advantage for the check valve if you leave your vacuum on all season. yes, this was not a very good year at all to test or try anything new, so some of my answers were not very accurate, we only made about 25% of our normal goal, so it was not a very fair test of the check valves. I don't measure sap volumes. I back calculated using my syrup production and assuming 2% sugar content. I produced about 1.2L/tap of syrup. Producers near me, mile radius, were talking L/tap (buckets, tubing with no vacuum and vacuum tubing Expand >>

14 Question 35 a Problem (C) Kwik Surveys Contact support

Question 1. Question 2

Question 1. Question 2 Survey Invitations Results Filtering Invitations Sent: 0 Invitations Accepted: 0 Untracked Responses: 94 Total Responses Received: 94 Select No Filtering Add Filter invitations & send reminders Question

More information

5/16 MAXFLOW SPOUTS 17/64 MAXFLOW SPOUTS. 5/16 black spout with barbs $0.25 $ /64 white spout without barbs. 5/16 white spout without barbs

5/16 MAXFLOW SPOUTS 17/64 MAXFLOW SPOUTS. 5/16 black spout with barbs $0.25 $ /64 white spout without barbs. 5/16 white spout without barbs FITTINGS The new line of 5/16" Maxflow fittings was specifically designed and developed for maple producers wanting to operate over 25 in-hg (high vacuum). These fittings enable a perfect seal with a vacuum

More information

News Release Northeastern Regional Field Office 4050 Crums Mill Road, Suite 203 Harrisburg, PA

News Release Northeastern Regional Field Office 4050 Crums Mill Road, Suite 203 Harrisburg, PA United Department of Agriculture National Agricultural Statistics Service News Release Northeastern Regional Field Office 4050 Crums Mill Road, Suite 203 Harrisburg, PA 17112-2875 Results of a recent survey

More information

A HISTORY OF THE GOOSENECK: THE BROWER SAP PIPING SYSTEM AND THE CARY MAPLE SUGAR COMPANY

A HISTORY OF THE GOOSENECK: THE BROWER SAP PIPING SYSTEM AND THE CARY MAPLE SUGAR COMPANY A HISTORY OF THE GOOSENECK: THE BROWER SAP PIPING SYSTEM AND THE CARY MAPLE SUGAR COMPANY By Matthew M. Thomas The initial application of plastic tubing for gathering maple sap in the 1950s was indisputably

More information

Pure Water Power Purification System 4-Stage RODI Operations Manual

Pure Water Power Purification System 4-Stage RODI Operations Manual Pure Water Power Purification System 4-Stage RODI Operations Manual Flush Valve Lever Quick Disconnect for RO Water Testing Water Supply In Drain Hose Pure Water Out to Waterfed Pole New Machine Setup

More information

INSTALLATION, OPERATION AND MAINTENANCE MANUAL ZERO WASTE REVERSE OSMOSIS SYSTEM

INSTALLATION, OPERATION AND MAINTENANCE MANUAL ZERO WASTE REVERSE OSMOSIS SYSTEM INSTALLATION, OPERATION AND MAINTENANCE MANUAL Warning Please read carefully before proceeding with installation. Your failure to follow a attached instructions or operating parameters may lead to the

More information

Owner s Manual AMERICAN. LiquaGen 5 Stage (RO/DI) Aquarium Reef System. YEAR Y 1

Owner s Manual AMERICAN. LiquaGen 5 Stage (RO/DI) Aquarium Reef System.   YEAR Y 1 Owner s Manual A NT HENTI AMERICAN Y 1 UT C WARR AR A 1-Y E LiquaGen 5 Stage (RO/DI) Aquarium Reef System YEAR MANUFACTURER WARRANTY Welcome to the LiquaGen experience and thank you for purchasing our

More information

Natural Gas to L.P. Gas Conversion Kit

Natural Gas to L.P. Gas Conversion Kit Natural Gas to L.P. Gas Conversion Kit For Bosch 96% AFUE Gas Furnace, BGH96 Model Installation Instructions 3124627 2 Natural Gas to L.P. Gas Conversion Kit Installation Instructions Data subject to change

More information

Installation & Instruction Manual For Portable Series R.O. units:

Installation & Instruction Manual For Portable Series R.O. units: Installation & Instruction Manual For Portable Series R.O. units: Please read carefully before proceeding with installation *System components and appearance may vary from above image. REPLACEMENT AND

More information

DURRIDGE STAINLESS STEEL SOIL GAS PROBE

DURRIDGE STAINLESS STEEL SOIL GAS PROBE DURRIDGE STAINLESS STEEL SOIL GAS PROBE CONTENTS 1. Introduction... 3 2. Placement... 3 3. Connection... 4 4 Measurement... 4 4.1 GRAB Protocol... 5 4.2 Continuous Monitoring... 6 4.3 Thoron Protocol...

More information

OVERVIEW pg 3. Major Points to Consider pg 3 Minor Points to Consider pg 3. INSTRUCTIONS pg 4

OVERVIEW pg 3. Major Points to Consider pg 3 Minor Points to Consider pg 3. INSTRUCTIONS pg 4 TABLE OF CONTENTS OVERVIEW pg 3 Major Points to Consider pg 3 Minor Points to Consider pg 3 INSTRUCTIONS pg 4 How Does Nordic Freeze Work pg 4 How Long Will the Ice Plug Take to Form pg 4 How Do I Know

More information

OPERATION MANUAL RTI RHS650 RTI TECHNOLOGIES, INC East Market Street York, PA Manual P/N

OPERATION MANUAL RTI RHS650 RTI TECHNOLOGIES, INC East Market Street York, PA Manual P/N OPERATION MANUAL RTI RHS650 RTI TECHNOLOGIES, INC. 4075 East Market Street York, PA 17402 Manual P/N 035-80589-02 Table of Contents Components... 2 Test... 4 Recovery/Recycling... 5 Evacuation... 7 Charging...

More information

Natural Gas to L.P. Gas Conversion Kit

Natural Gas to L.P. Gas Conversion Kit Natural Gas to L.P. Gas Conversion Kit For Bosch 80% AFUE Gas Furnace, BGS80 Model Installation Instructions 3124627 2 Natural Gas to L.P. Gas Conversion Kit Installation Instructions Data subject to change

More information

Medical Gas Control Panel

Medical Gas Control Panel Medical Gas Control Panel INSTALLATION & MAINTENANCE MANUAL 255105 (Rev. 6) 2018-04 2 255105 (Rev. 6) 2018-04 1.0 User Responsibilities The information contained in this installation and operation maintenance

More information

Density of Granular Material by Modified Sand-Cone Method for Thin Layers

Density of Granular Material by Modified Sand-Cone Method for Thin Layers Density of Granular Material by Modified Sand-Cone Method for Thin Layers 1. Scope: This test is for determining in-place density of granular materials that have a total thickness of 3 or less. 2. Apparatus:

More information

QUIK-jet Micro-Injection System

QUIK-jet Micro-Injection System QUIK-jet Micro-Injection System Training Manual Revision Date: 11/12/07 Table of Contents Subject Headings Pages Introduction 3 Parts of the QUIK-jet Kit 4 QUIK-jet Assembly and Setup 5-6 3 Easy Steps

More information

SASK-A-POLE OWNERS AND USERS MANUAL

SASK-A-POLE OWNERS AND USERS MANUAL SASK-A-POLE OWNERS AND USERS MANUAL GENERAL INFORMATION The Saskatchewan Abilities Council s Sask-a-Pole accessibility and transfer aid is designed to help provide safe and easy access to chairs, beds,

More information

VACUUM TESTING PRECAST CONCRETE MANHOLES

VACUUM TESTING PRECAST CONCRETE MANHOLES 1 OF 5 testing is a quick, safe and practical way to validate manhole system integrity. Manhole sections can be tested at the precast concrete plant prior to delivery or on site prior to backfilling. Here

More information

Oxygen Contamination

Oxygen Contamination MPMS Application Note 1014-210 Oxygen Contamination This application note describes potential sources for oxygen contamination in the sample chamber and discusses its possible effects. Molecular oxygen,

More information

Technical Data Sheet T 2025

Technical Data Sheet T 2025 Self-operated emperature Regulators emperature Regulator ype 4 Valve closes when the temperature rises. emperature Regulator ype 4u Valve opens when the temperature rises. Balanced single-seated globe

More information

Water Weir Flow Controller. Introduction. Safety Precautions. Mounting the Hardware

Water Weir Flow Controller. Introduction. Safety Precautions. Mounting the Hardware 57007-88 Introduction Safety Precautions This instruction sheet describes how to set up and use the Hach (Figure 1). A water weir is a device that raises or diverts water to regulate the flow. Hach s water

More information

PARTS, SERVICE & REPAIR BULLETIN

PARTS, SERVICE & REPAIR BULLETIN WH4C PARTS, SERVICE & REPAIR BULLETIN 400 SERIES HEAVY DUTY WELDING HANDLE Manual No: 0056-3763 Issue Date: October 07, 03 Revision: AA VictorTechnologies.com Table of Contents SECTION : GENERAL SAFETY

More information

G7S Hand Pump Owner s Manual

G7S Hand Pump Owner s Manual G7S Hand Pump Owner s Manual Copyright Air Venturi 2018 Version 4-18 Specifications 24.80 inches long closed 43.31 inches long extended 4500 psi/310 bar max pressure Features Integral manometer (pressure

More information

AMANDA HERRINGTON: Coming into this week, a place that you've had success as a playoff event, what is it about TPC Boston?

AMANDA HERRINGTON: Coming into this week, a place that you've had success as a playoff event, what is it about TPC Boston? PRE-TOURNAMENT INTERVIEW: August 31, 2016 SEAN O HAIR AMANDA HERRINGTON: We'll go ahead and get started. We would like to welcome Sean O'Hair into the interview room here at the Deutsche Bank Championship.

More information

Engineered solutions for complex pressure situations

Engineered solutions for complex pressure situations SPECIAL SERVICES Engineered solutions for complex pressure situations Cudd Energy Services (CES) delivers custom engineered solutions to resolve complex pressure situations resulting from equipment failure

More information

The Making of the Inexpensive Brake Pressure Bleeder

The Making of the Inexpensive Brake Pressure Bleeder Page 1 of 8 The Making of the Inexpensive Brake Pressure Bleeder Back in early 1999 I mentioned on the Digest(s) that my own personal brake pressure bleeder was made from a pump-up garden sprayer and some

More information

The next Saturday I decided to 'do the fix'. I figured it would take about an hour. Like usual I figured wrong. Murphy hangs out at my house a lot.

The next Saturday I decided to 'do the fix'. I figured it would take about an hour. Like usual I figured wrong. Murphy hangs out at my house a lot. Fixing The 4th Gear Problem: Another Version The Problem: I have an '01 LC which developed a nasty habit of jumping out of 4th gear when the bike was under a heavy load such as being in 4th gear, full

More information

Pneumatic Conveying Principles BSH&E SEMINAR

Pneumatic Conveying Principles BSH&E SEMINAR Pneumatic Conveying Principles Definition What is Pneumatic Conveying? A method for conveying bulk material using gas (usually air) The material can be blown (pressure systems) or sucked (vacuum systems)

More information

BS2000 MOTOR ELECTRONICS, INC. PROTECTION INSTRUCTION MANUAL. (407) Phone: Website:

BS2000 MOTOR ELECTRONICS, INC. PROTECTION INSTRUCTION MANUAL. (407) Phone: Website: BS2000 INSTRUCTION MANUAL MOTOR PROTECTION ELECTRONICS, INC. 2464 Vulcan Road Apopka, Florida 32703 Phone: Website: (407) 299-3825 www.mpelectronics.com Revision Date: 6-23-14 RECOMMENDED REPLACEMENT

More information

UNITY 2. Uni-DAAMS Manual. Version 1.3 (Changes to Section 1.1) March 2010

UNITY 2. Uni-DAAMS Manual. Version 1.3 (Changes to Section 1.1) March 2010 UNITY 2 Uni-DAAMS Manual Version 1.3 (Changes to Section 1.1) March 2010 1. Introduction...2 1.1. Installing the DAAMS tube ovens...2 1.2. Swapping between tube types...5 1.3. Changing tube oven o-rings...6

More information

CSA Sample Draw Aspirator Adapter Operator s Manual

CSA Sample Draw Aspirator Adapter Operator s Manual 30-0951-CSA Sample Draw Aspirator Adapter Operator s Manual Part Number: 71-0367 Revision: 0 Released: 4/30/15 www.rkiinstruments.com WARNING Read and understand this instruction manual before operating

More information

5600 ACID FILTER SERVICING INSTRUCTIONS

5600 ACID FILTER SERVICING INSTRUCTIONS 5600 ACID FILTER SERVICING INSTRUCTIONS Service to be done every 6 months. If you need further information, call Metro Water Filter of the South. PRELIMINARY NOTES Ø This operation should take approximately

More information

Operating Instructions Model and Hydrostatic Test Pump

Operating Instructions Model and Hydrostatic Test Pump Operating Instructions Model 29200 and 2920 Hydrostatic Test Pump Dimension Weight Pump Pressure for 29200 Pump Pressure for 2920 Gauge for 29200 Gauge for 2920 Inlet Connection Outlet Connection Hose

More information

200 PSI HIGH-FLOW AIR SOURCE KIT

200 PSI HIGH-FLOW AIR SOURCE KIT 200 PSI HIGH-FLOW AIR SOURCE KIT 50% Duty Compressor on 2.0 Gallon Air Tank PART NO. 20008 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of

More information

Rain Barrels. Did You Know?

Rain Barrels. Did You Know? Rain Barrels Rain barrels are water storage units designed to collect water from impermeable surfaces like roofs. The most common type of rain barrel collects runoff from roofs by connecting to gutter

More information

MANUAL BE SERIES Test Benches

MANUAL BE SERIES Test Benches The CustomCrimp Manual BE Series Test Benches are designed with features that make proof and burst testing of hydraulic hose assemblies a quick and easy procedure. CUSTOMIZED AND SPECIAL DESIGN BENCHES

More information

Flammability Chart. Gas Formula Ignition

Flammability Chart. Gas Formula Ignition Leak Detection 101 Investigating a leak is simplified if you know the basics. By J. Scott Kleppe Sensit (J and N Enterprises, Inc.) Every day new gas services are added to provide economical energy to

More information

Gas Lines. Technical Manual. Sumitomo (SHI) Cryogenics of America, Inc Vultee Street Allentown, PA U.S.A.

Gas Lines. Technical Manual. Sumitomo (SHI) Cryogenics of America, Inc Vultee Street Allentown, PA U.S.A. Gas Lines Technical Manual Sumitomo (SHI) Cryogenics of America, Inc. 1833 Vultee Street Allentown, PA 18103-4783 U.S.A. Revision F: April 2008 261320A TABLE OF CONTENTS Page DESCRIPTION...1 SPECIFICATIONS...2

More information

UltRo Dual Flow Reverse Osmosis Water System

UltRo Dual Flow Reverse Osmosis Water System UltRo Dual Flow Reverse Osmosis Water System Congratulations on this great investment to your health. **IMPORTANT NOTE BEFORE YOU BEGIN** We recommend you call your local friendly plumber to ensure proper

More information

INSTALLATION AND SERVICE MANUAL FOR LANCER DISPENSING TOWERS

INSTALLATION AND SERVICE MANUAL FOR LANCER DISPENSING TOWERS Please refer to the Lancer web site (www.lancercorp.com) for information relating to Lancer Installation and Service Manuals, Instruction Sheets, Technical Bulletins, Service Bulletins, etc. INSTALLATION

More information

LRS(H)4 USER MANUAL. Read the complete manual before installing and using the regulator.

LRS(H)4 USER MANUAL. Read the complete manual before installing and using the regulator. LRS(H)4 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to the

More information

RK-IR Sample Draw Aspirator Adapter Operator s Manual

RK-IR Sample Draw Aspirator Adapter Operator s Manual 30-0951RK-IR Sample Draw Aspirator Adapter Operator s Manual Part Number: 71-0018RK Revision: A Released: 6/2/10 www.rkiinstruments.com Product Warranty RKI Instruments, Inc. warrants gas alarm equipment

More information

AcornVac Vacuum Plumbing Systems - Trouble Shooting Guide

AcornVac Vacuum Plumbing Systems - Trouble Shooting Guide AcornVac Vacuum Plumbing Systems - Trouble Shooting Guide 1. Accumulators Problem Accumulator is overflowing If Accumulator continues to overflow Correction 1. Push and hold the manual activation button

More information

Instructions for Assembly, Installation, and Operation of the Gas Addition Kit Accessory with the CEM Discover Systems

Instructions for Assembly, Installation, and Operation of the Gas Addition Kit Accessory with the CEM Discover Systems Corporation Issued: 5/09 P/N: 600104 Rev. 2 Instructions for Assembly, Installation, and Operation of the Gas Addition Kit Accessory with the CEM Discover Systems The Gas Addition Accessory permits the

More information

accidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS

accidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS 18 GAUGE 2 INCH BRAD NAILER Model: 7555 CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry.

More information

Mounting and operating instructions EB 2530 EN. Self-operated Pressure Regulator. Pressure Reducing Valve Type M 44-2

Mounting and operating instructions EB 2530 EN. Self-operated Pressure Regulator. Pressure Reducing Valve Type M 44-2 Self-operated Pressure Regulator Pressure Reducing Valve Type M 44-2 Type M 44-2, connection G 1 4, K VS = 0.15 Type M 44-2, connection G 1, K VS = 6 Fig. 1 Type M 44-2 Pressure Reducing Valve Mounting

More information

Jerry Martin s Co 2 Snow Apparatus

Jerry Martin s Co 2 Snow Apparatus Introduction: Jerry Martin fashioned this Co 2 snow optics cleaning device similar to the ones that he built at McDonald Observatory. We made changes to fit our particular needs and I believe improved

More information

Operation and Maintenance Instructions

Operation and Maintenance Instructions Hydratight Limited Bentley Road South Darlaston West Midlands WS10 8LQ United Kingdom Tel: +44 121 50 50 600 Fax: +44 121 50 50 800 E-mail: enquiry@hydratight.com Website: www.hydratight.com TOP COLLAR

More information

accidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS

accidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS 18 GAUGE 1-1/4 INCH BRAD NAILER Model: 7611 CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry.

More information

Bridge Plugs, Ball Drop & Caged Ball Plugs For Zone Isolation

Bridge Plugs, Ball Drop & Caged Ball Plugs For Zone Isolation Bridge Plugs, Ball Drop & Caged Ball Plugs For Zone Isolation ADVANTAGE composite bridge plug, caged ball and ball drop (flow thru) frac plug provide a means to isolate multiple zones during high pressure

More information

2003 WJTA American Waterjet Conference August 17-19, 2003 Houston, Texas Paper PIPE THREADS-WHAT IS THE LIMIT?

2003 WJTA American Waterjet Conference August 17-19, 2003 Houston, Texas Paper PIPE THREADS-WHAT IS THE LIMIT? 23 WJTA American Waterjet Conference August 17-19, 23 Houston, Texas Paper PIPE THREADS-WHAT IS THE LIMIT? D. Wright, J. Wolgamott, G. Zink StoneAge, Inc. Durango, Colorado, U.S.A. ABSTRACT At present

More information

Oak Hill Country Club ~ Rochester, NY JAY HAAS

Oak Hill Country Club ~ Rochester, NY JAY HAAS Oak Hill Country Club ~ Rochester, NY Hole # 1 2 3 4 5 6 7 8 9 Out 10 11 12 13 14 15 16 17 18 Out Total Yardage 452 401 214 570 428 170 461 428 418 3,542 429 188 372 598 323 181 439 460 469 3,459 7,001

More information

Macro-Infusion Guide

Macro-Infusion Guide 115v and 12v System Macro-Infusion Guide Macro-Infusion rapidly introduces a large volume of solution directly into a tree s vascular system. Macro-infusion delivers complete and even distribution of solution

More information

History - Tryout Procedure - Details of the Match. Brief History:

History - Tryout Procedure - Details of the Match. Brief History: MINI-PALMA TEAM History - Tryout Procedure - Details of the Match Brief History: The "Mini-Palma Match" is a friendly international long range prone competition between the New England States and the Maritime

More information

2 I All-Flo Pump Co.

2 I All-Flo Pump Co. 2 I All-Flo Pump Co. 3I All-Flo Pump Co. Model Designation Matrix Pump Dimensions A B C D F H I J K L P300 18.90" 22.83" 31.50" 3.94" 15.28" 27.17" 1.57" 2.95" 15.55" 19.49" (480 mm) (580 mm) (800 mm)

More information

2 I All-Flo Pump Co.

2 I All-Flo Pump Co. 2 I All-Flo Pump Co. 3I All-Flo Pump Co. Model Designation Matrix PRODUCT SERIES PUMP SIZE FLUID CONNECTI INTERM INNER CHAM ON TYPE FLUID C HAMBER MANIFOLDS EDI A TE/ BER O-RINGS VAL VE SEAT VALVE/BAL

More information

ACCESSORY KIT INSTALLATION INSTRUCTIONS

ACCESSORY KIT INSTALLATION INSTRUCTIONS ACCESSORY KIT INSTALLATION INSTRUCTIONS 1NP0680 - PROPANE CONVERSION FOR USE WITH MODELS: PM8, PC8, PM9, PC9, FL9M, FL9C, FC9M, FC9C This conversion kit is to be installed by a qualified service agency

More information

MANUAL: Jumbo Gate Valve

MANUAL: Jumbo Gate Valve MANUAL: Jumbo Gate Valve INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE Read instruction manual before use. Operation of this device without understanding the manual and receiving proper training is a

More information

Operator: Save these instructions for future use!

Operator: Save these instructions for future use! WHITE-RODGERS Type 36C04, 36C14 Step-Opening Combination Gas Control (24 Volt, 120 Volt & 750 mv Models) INSTALLATI INSTRUCTIS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW

More information

Operation and Maintenance Manual for GENTEC Model 881VR Continuous/Intermittent Digital Suction Regulators

Operation and Maintenance Manual for GENTEC Model 881VR Continuous/Intermittent Digital Suction Regulators Operation and Maintenance Manual for GENTEC Model 881VR Continuous/Intermittent Digital Suction Regulators Genstar Technologies Co., Inc. 4525 Edison Avenue Chino, CA 91710 USA TEL 909-0-272 FAX 909-0-485

More information

THE INNER WORKINGS OF A SIPHON Jacques Chaurette p. eng. January 2003

THE INNER WORKINGS OF A SIPHON Jacques Chaurette p. eng.  January 2003 THE INNER WORKINGS OF A SIPHON Jacques Chaurette p. eng. www.lightmypump.com January 2003 Synopsis The objective of this article is to explain how a siphon works. The difference between low pressure, atmospheric

More information

REVERSE OSMOSIS WATER FILTRATION SYSTEM MODEL EWR 4075 INSTRUCTION MANUAL

REVERSE OSMOSIS WATER FILTRATION SYSTEM MODEL EWR 4075 INSTRUCTION MANUAL REVERSE OSMOSIS WATER FILTRATION SYSTEM MODEL EWR 4075 INSTRUCTION MANUAL Excalibur Water Systems 142 Commerce Park Drive, Unit M & N Barrie, Ontario L4N 8W8 CANADA www.excaliburwater.com 2013.05.7446

More information

REVERSE OSMOSIS INSTALLATION Watermark 4 Stage

REVERSE OSMOSIS INSTALLATION Watermark 4 Stage REVERSE OSMOSIS INSTALLATION Watermark 4 Stage BRIEF TECHNICAL ASPECT OF THE WATER TREATMENT SYSTEM The Filter Systems Australia Water Treatment System utilizes a process called reverse osmosis (RO). As

More information

Natural Gas High-Altitude Conversion Kit For Installations in the United States (2,001 10,000 Feet)

Natural Gas High-Altitude Conversion Kit For Installations in the United States (2,001 10,000 Feet) Natural Gas High-Altitude Conversion Kit For Installations in the United States (2,001 10,000 Feet) INSTALLATION INSTRUCTIONS For R7 Series Light Commercial Packaged Gas Electric Units IIMPORTANT: Please

More information

North American sealing solutions Bridge Plug Ball Drop Frac Plug Caged Ball Frac Plug

North American sealing solutions Bridge Plug Ball Drop Frac Plug Caged Ball Frac Plug North American sealing solutions Bridge Plug Ball Drop Frac Plug Caged Ball Frac Plug The North American Sealing Solutions composite bridge plug, caged ball and ball drop (flow thru) frac plug provide

More information

200 PSI FAST-FILL AIR SOURCE KIT

200 PSI FAST-FILL AIR SOURCE KIT 200 PSI FAST-FILL AIR SOURCE KIT 55% Duty Compressor on 2.0 Gallon Air Tank PART NO. 20007 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of

More information

Mass Spec will not Autotune

Mass Spec will not Autotune Mass Spec will not Autotune Applies to 5973A/N MSD What could be the problem? There could be several things that would cause your Mass Spec not to Autotune. The most common, easily corrected Autotune problems

More information

W I L D W E L L C O N T R O L PRESSURE BASICS AND CONCEPTS

W I L D W E L L C O N T R O L PRESSURE BASICS AND CONCEPTS PRESSURE BASICS AND CONCEPTS Pressure Basics and Concepts Learning Objectives You will be familiarized with the following basic pressure concepts: Defining pressure Hydrostatic pressure Pressure gradient

More information

Operator: Save these instructions for future use!

Operator: Save these instructions for future use! INLET PRESS TAP WHITE-RODGERS 36E93-304 Delay-Opening Combination Gas Valve INSTALLATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY

More information

Installation Instructions WARNING: WARNING: WARNING: LP AND HIGH ALTITUDE LP GAS CONVERSION KIT FOR UNITED STATES INSTALLATIONS

Installation Instructions WARNING: WARNING: WARNING: LP AND HIGH ALTITUDE LP GAS CONVERSION KIT FOR UNITED STATES INSTALLATIONS LP AND HIGH ALTITUDE LP GAS CONVERSION KIT FOR UNITED STATES INSTALLATIONS Installation Instructions For Model Series *G7/*GC2 Furnaces and Appliances Using Honeywell Gas Valves. BEFORE THE CONVERSION

More information

I i Clear Juice ' Brix Syrup

I i Clear Juice ' Brix Syrup 70 BNOINEERINO SECTION Mr. G. P. Bhargava presented the following paper. Paper AN INVESTIGATION INTO THE CAUSES OF EVAPORATOR TUBE FAILURE G. P. BHARGAVA AND R. C. SHARMA National Sugar Institute, Kanpur,

More information

5 Gallon Pressure Pot with HVLP Spray Gun and Hose

5 Gallon Pressure Pot with HVLP Spray Gun and Hose California Air Tools 5 Gallon Pressure Pot with HVLP Spray Gun and Hose Model No. 365 Technical Data Type of feed.pressure Maximum pressure in the tank... 0,413Mpa (60PSI) Working pressure in the tank.0,

More information

Operating Procedures for GripTight 15.5 SDR & IPS Test Plugs

Operating Procedures for GripTight 15.5 SDR & IPS Test Plugs EST Group DC2518 08/01 REV 3 12/12 Page 1 of 6 Operating Procedures for GripTight SDR & IPS Test Plugs WARNING For proper operation, GripTight plugs must be assembled as shown in Figure 1. Pressure testing

More information

GETZ MANUFACTURING VACUFILL SYSTEMS INSTRUCTION MANUAL

GETZ MANUFACTURING VACUFILL SYSTEMS INSTRUCTION MANUAL GETZ MANUFACTURING VACUFILL SYSTEMS INSTRUCTION MANUAL GETZ VACUFILL SYSTEMS TABLE OF CONTENTS PAGE # 1... INTRODUCTION & OPERATING REQUIREMENTS 2-4... ASSEMBLY INSTRUCTIONS 5-6... PARTS LIST 7... 586O8

More information

Cautions : 1. Be careful when you release the Stop Fitting with some internal pressure

Cautions : 1. Be careful when you release the Stop Fitting with some internal pressure The flow-shut mechanism will operate to stop the air flow when the tube is disconnected and will allow air flow when the tube is connected. The double-passage structure facilitates easy connection and

More information

Standard Operating and Maintenance Instructions for Pumping System Model PS-90

Standard Operating and Maintenance Instructions for Pumping System Model PS-90 Standard Operating and Maintenance Instructions for Pumping System Model PS-90 High Pressure Equipment Company 2955 West 17th Street, Suite 6 PO Box 8248 Erie, PA 16505 USA 814-838-2028 (phone) 814-838-6075

More information

FlashGARD HP Reverse Osmosis Filtration System Model Number FSTMO75 Part Number

FlashGARD HP Reverse Osmosis Filtration System Model Number FSTMO75 Part Number 3M Water Filtration Products FlashGARD HP Reverse Osmosis Filtration System Model Number FSTMO75 Part Number 56123-06 Installer: Please leave this manual with owner/operator. End User: Please retain for

More information

STREAMLINE SHOP SERIES MODEL 30040V OPERATION & PARTS MANUAL

STREAMLINE SHOP SERIES MODEL 30040V OPERATION & PARTS MANUAL STREAMLINE SHOP SERIES MODEL 30040V OPERATION & PARTS MANUAL Sage Oil Vac 360 North Lakeside Drive Amarillo, TX 79118 phone: 806.372.7559 fax: 806.372.7565 1 2 1.1 WARRANTY SERVICE OR RETURNS Call 1-877-645-8227

More information

Brandt, if we can just get some opening comments on the round and what keyed you to the 59.

Brandt, if we can just get some opening comments on the round and what keyed you to the 59. ROUND 1 INTERVIEW August 16, 2018 BRANDT SNEDEKER ( -11) JACK RYAN: We're joined by Brandt Snedeker -- BRANDT SNEDEKER: Say it, please say it. JACK RYAN: -- after an opening 59 -- BRANDT SNEDEKER: Thank

More information

GM Series Dual-Block Multi-Function Gas Control Valves

GM Series Dual-Block Multi-Function Gas Control Valves Installation Sheets Manual 121 Gas Combustion Combination Controls and Systems Section G Technical Bulletin GM Issue Date 0297 GM Series Dual-Block Multi-Function Gas Control Valves Figure 1: GM Series

More information

CUT OFF TOOL MODEL: CAT113

CUT OFF TOOL MODEL: CAT113 CUT OFF TOOL MODEL: CAT113 Part No: 3120135 ASSEMBLY & INSTRUCTION MANUAL LS0309 INTRODUCTION Thank you for purchasing this CLARKE product Before attempting to use the product, it is essential that you

More information

An irrigation system serves as the veins

An irrigation system serves as the veins An irrigation system serves as the veins and arteries that deliver life-sustaining water to golf courses. Superintendents must maintain that system properly to avoid turf-quality problems on fairways,

More information

Instruction Manual Dräger MSI P7 and MSI P7 plus

Instruction Manual Dräger MSI P7 and MSI P7 plus Dräger MSI GmbH Rohrstraße 32 58093 Hagen Tel.: +49-2331 / 9584-0 Fax: +49-2331 / 9584-29 e-mail: info@draeger-msi.de D 923; Edition 2011-01-01 Content 1. General Hints Page 4 2. The Instrument 2.1 Front

More information

Installation Instructions

Installation Instructions 48011HW NATURAL GAS TO PROPANE CONVERSION KIT 58HDX, 359AAV, PG9YAB, PG9YAA Installation Instructions SAFETY REQUIREMENTS Installing and servicing heating equipment can be hazardous due to gas and electrical

More information

Customer Support Troublshooting

Customer Support Troublshooting PB-TLRO4H50T - 4 Stage Reverse Osmosis Water Filtration System 1 of 6 Customer Support Troublshooting The number one, essential, tool to good customer service is your SMILE. Even if your customer can t

More information

Please Keep this Instruction Manual for future reference TABLE OF CONTENT

Please Keep this Instruction Manual for future reference TABLE OF CONTENT Please Keep this Instruction Manual for future reference It contains important information on how to maintain and care for your LiquaGen water filter system Warning : Using a qualified installer is recommended.

More information

FUEL PUMP UPGRADE KIT INSTALLATION INSTRUCTIONS PART NUMBER R

FUEL PUMP UPGRADE KIT INSTALLATION INSTRUCTIONS PART NUMBER R FUEL PUMP UPGRADE KIT INSTALLATION INSTRUCTIONS PART NUMBER R420-0001 APPLICATION: 2014-16 F22 228i & xdrive coupe 2015-16 F23 228i & xdrive convertible 2012-16 F30 328i & xdrive sedan 2014-16 F31 328i

More information

RS(H)10,15 USER MANUAL. Read the complete manual before installing and using the regulator.

RS(H)10,15 USER MANUAL. Read the complete manual before installing and using the regulator. RS(H)10,15 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to

More information

Met One E-BAM Particulate Monitor

Met One E-BAM Particulate Monitor STANDARD OPERATING PROCEDURES Met One E-BAM Particulate Monitor AMBIENT AIR MONITORING PROGRAM for the 130 LIBERTY STREET DECONSTRUCTION PROJECT LOWER MANHATTAN DEVELOPMENT CORPORATION 1 Liberty Plaza

More information

15ME-014 INSTRUCTION MANUAL OF STERN TUBE SEALING TYPE EVK2RV. URL

15ME-014 INSTRUCTION MANUAL OF STERN TUBE SEALING TYPE EVK2RV. URL 15ME-014 E INSTRUCTION MANUAL OF STERN TUBE SEALING TYPE EVK2RV URL http://www.kemel.com CONTENTS [A] Installation [B] Piping [C] Inspection [D] Handling [E] Parts replacement intervals [F] Handling check

More information

Grow to Pro Basketball

Grow to Pro Basketball 7208c-0920.qrk /2/02 : PM Page 1 Grow to Pro Basketball Model Number: 7208 Product features and decoration may vary from the photograph above. Please keep this instruction sheet for future reference, as

More information

Operating Instructions Models and Hydrostatic Test Pumps

Operating Instructions Models and Hydrostatic Test Pumps Operating Instructions Models 33100 and 33101 Hydrostatic Test Pumps 33100 DIMENSIONS: WEIGHT: PUMP: MOTOR: CONTROL: GAUGE: DISCHARGE HOSE: 16 (40cm) L x 22 (55cm) W x 18 (45cm) H 87 lbs., 39.5 kg Triplex

More information

STREAMLINE SHOP SERIES MODEL OPERATION & PARTS MANUAL

STREAMLINE SHOP SERIES MODEL OPERATION & PARTS MANUAL STREAMLINE SHOP SERIES MODEL 30080 OPERATION & PARTS MANUAL 1.1 WARRANTY SERVICE OR RETURNS Call 1-877-645-8227 and select option 1 between the hours of 8am to 5pm CST. 1.2 ORDER PARTS Call 1-877-645-8227

More information

Installation Instructions

Installation Instructions LP and High Altitude LP Gas Conversion Kit For United States Installations Installation Instructions For Model Series *G6/PGF1 Furnaces, *L1/PGC1 Furnaces, and *R4/PPG1 Gas/Electric Appliances using Honeywell

More information

P5513. Users Manual. Pneumatic Comparison Test Pump. Test Equipment Depot Washington Street Melrose, MA TestEquipmentDepot.

P5513. Users Manual. Pneumatic Comparison Test Pump. Test Equipment Depot Washington Street Melrose, MA TestEquipmentDepot. Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 TestEquipmentDepot.com P5513 Pneumatic Comparison Test Pump Users Manual PN 3963372 November 2010 2010 Fluke Corporation. All

More information

36C/36D HSI, DSI Proven Pilot Gas Valves INSTALLATION INSTRUCTIONS

36C/36D HSI, DSI Proven Pilot Gas Valves INSTALLATION INSTRUCTIONS 36C/36D HSI, DSI Proven Pilot Gas Valves INSTALLATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING

More information

SAILTEC, INC CONGER COURT, OSHKOSH, WI USA

SAILTEC, INC CONGER COURT, OSHKOSH, WI USA OK to make this valve hand tight. Pin Mount Style Integral lies 4-5 Degrees above Horizontal. If you store your Hunter "bow down" you will get air-lock in the Integral. Slot Mount Style Pump Body "Down"

More information

MARK WILLIAMS: We would like to welcome Tony Romo to the interview room at the Corales Puntacana Resort & Club Championship.

MARK WILLIAMS: We would like to welcome Tony Romo to the interview room at the Corales Puntacana Resort & Club Championship. PRE-TOURNAMENT INTERVIEW March 20, 2018 TONY ROMO MARK WILLIAMS: We would like to welcome Tony Romo to the interview room at the Corales Puntacana Resort & Club Championship. Tony, welcome. It's kind of

More information

INSTRUCTIONS FOR CONVERTING CONDENSING GAS MOBILE HOME FURNACES MODEL SERIES: CMA3*, CMC1*, VMA3*, VMC1*

INSTRUCTIONS FOR CONVERTING CONDENSING GAS MOBILE HOME FURNACES MODEL SERIES: CMA3*, CMC1*, VMA3*, VMC1* INSTRUCTIONS FOR CONVERTING CONDENSING GAS MOBILE HOME FURNACES MODEL SERIES: CMA3*, CMC1*, VMA3*, VMC1* THIS KIT CONTAINS: AOPS7741 (NATURAL TO PROPANE CONVERSION PARTS FOR MODEL SIZE, 50) AOPS7742(NATURAL

More information

Torque Specifications

Torque Specifications SENR3130-10 Torque Specifications All Caterpillar Products S/N From the library of Barrington Diesel Club CONTENT General Information 01/07/2005 Introduction to Torque 01/07/2005 Torque-Turn 01/07/2005

More information