Mini Channel & Fittings
|
|
|
- Carol Walsh
- 5 years ago
- Views:
Transcription
1 Our mini channels and fittings provide for an economical method of supporting light load requirements on a strut system. Channel Channels are cold formed on our modern rolling mills from 18 Ga. (1.2 mm) low carbon steel strips plain steel (ASTM A ,000 PSI min. yield) and pre-galvanized steel strips, (ASTM A653 33,000 PSI min. yield). A continuous slot with inturned lips provides the ability to make attachments at any point. Channel combinations are made with new state of the art, high-tech welding equipment. Lengths Standard lengths are 10 (3.05 m) and 20 (6.09 m) for series, and 10 (3.05 m) for B72 series. Custom lengths are available. Fittings Mini fittings are formed from hot rolled pickled and oiled strip or sheet steel (ASTM A1011, HSLAS, Grade 50, Class1). The following dimensions apply to all fittings except as noted on the drawings: Hole Size 9 /32 (7.14 mm) Dia. Hole Spacing (10.3 mm) from end and 1 1 /16 (27.0 mm) on center. Width (20.6 mm) Thickness 1 /8 (3.2 mm) Materials & Finishes* *Unless otherwise noted. Finish Code Finish Specification PLN Plain ASTM A1011, HSLAS, Grade 50, Class 1 ZN Electro-Plated Zinc ASTM B633 SC3 Type II GRN DURA-GREEN GLV Pre-Galvanized ASTM A653 33,000 PSI min. yield HDG Hot-Dipped Galvanized ASTM A123 Metric Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters. 242
2 Channel Thickness: 18 Ga. (1.2 mm) Standard lengths: 10 (3.05 m) & 20 (6.09 m) Standard finishes: Plain, DURA GREEN, Pre-Galvanized Weight:.42 Lbs./Ft. (.62 kg/m) 3 /16 (4.7) 3 /16 (4.7) 7 /16 (11.1) 3 /32 (2.4) X Y Y X (8.8).406 A Wt..84 Lbs./Ft. (1.25 kg/m) Section Properties X - X Axis Y - Y Axis Areas of Momentof Section Radius of Moment of Section Radius of Channel Weight Section Inertia (I) Modulus (S) Gyration (r) Inertia (I) Modulus (S) Gyration (r) lbs./ft. kg/m sq. in. cm 2 in. 4 cm 4 in. 3 cm 3 in. cm in. 4 cm 4 in. 3 cm 3 in. cm.420 (.62).123 (.80).0103 (.43).0221 (.36).289 (.73).0134 (.56).0330 (.54).330 (.84) A.839 (1.25).247 (1.59).0500 (2.08).0616 (1.01).450 (1.14).0269 (1.12).0663 (1.09).330 (.84) Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual. Beam Loading Uniform Deflection = Beam Span Channel Uniform Load and Deflection 1/240 Span 1/360 Span In. mm Style Lbs. kn In. mm Lbs. kn Lbs. kn 12 (305) 364 (1.62).027 (.68) 364 (1.62) 364 (1.62) A 420* (1.87).006 (.15) 420* (1.87) 420* (1.87) 24 (609) 182 (0.81).109 (2.77) 167 (0.74) 111 (0.49) A 420* (1.87).051 (1.29) 420* (1.87) 420* (1.87) 36 (914) 121 (0.54).245 (6.22) 74 (0.33) 50 (0.22) A 341 (1.51).141 (3.58) 341 (1.51) 242 (1.07) 48 (1219) 91 (0.40).436 (11.07) 42 (0.18) 28 (0.12) A 256 (1.14).250 (6.35) 204 (0.91) 136 (0.60) 60 (1524) 73 (0.32).681 (17.30) 27 (0.12) 18 (0.08) A 205 (0.91).391 (9.93) 131 (0.58) 87 (0.39) 72 (1829) 61 (0.27).981 (24.92) 19 (0.08) 12 (0.05) A 170 (0.75).563 (14.30) 91 (0.40) 61 (0.27) Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral bracing (see page 12 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear. Column Loading Max. Column Loading K =.80 Max. Column Loading C.G.) Unbraced Channel Loaded@ Loaded@ Height Style C.G. Slot Face K =.65 K = 1.0 K = 1.2 In. mm Lbs. kn Lbs. kn Lbs. kn Lbs. kn Lbs. kn 12 (305) 2052 (9.13) 820 (3.65) 2161 (9.61) 1890 (8.41) 1715 (7.63) A 4666 (20.75) 1449 (6.44) 4710 (20.95) 4593 (20.43) 4503 (20.03) 24 (609) 1350 (6.00) 645 (2.87) 1624 (7.22) 1020 (4.54) 818 (3.64) A 4275 (19.01) 1367 (6.08) 4453 (19.81) 3982 (17.71) 3624 (16.12) 36 (914) 818 (3.64) 471 (2.09) 1053 (4.68) 633 (2.81) 515 (2.29) A 3624 (16.12) 847 (3.77) 4023 (17.89) 2965 (13.19) 2179 (9.69) 48 (1219) 589 (2.62) 369 (1.64) 745 (3.31) 456 (2.03) 365** (1.62) A 2713 (12.06) 504 (2.24) 3421 (15.21) 1765 (7.85) 1225 (5.45) 60 (1524) 456 (2.03) 300 (1.33) 579 (2.57) 347** (1.54) A 1765 (7.85) 323 (1.44) 2647 (11.77) 1129 (5.02) 271** (1.20) 784** (3.49) 72 (1829) 365** (1.62) 248 (1.10) 470 (2.09) 271** (1.20) A 1225 (5.45) 224 (0.99) 1856 (8.25) 784** (3.49) 545** (2.42) **Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration. r 243
3 B72 Channel Thickness: 18 Ga. (1.2 mm) Standard lengths: 10 (3.05 m) & 20 (6.09 m) Standard finishes: Plain, DURA GREEN, Pre-Galvanized Weight:.29 Lbs./Ft. (.43 kg/m) 3 /16 (4.7) 7 /16 (11.1) (4.0) 3 /16 (4.7) 3 /32 (2.4) X Y Y.406 X.406 B72A Wt..58 Lbs./Ft. (.87 kg/m) Section Properties X - X Axis Y - Y Axis Areas of Momentof Section Radius of Moment of Section Radius of Channel Weight Section Inertia (I) Modulus (S) Gyration (r) Inertia (I) Modulus (S) Gyration (r) lbs./ft. kg/m sq. in. cm 2 in. 4 cm 4 in. 3 cm 3 in. cm in. 4 cm 4 in. 3 cm 3 in. cm B (.43).084 (.54).0018 (.07).0073 (.12).146 (.37).0077 (.32).0190 (.31).302 (.77) B72A.574 (.85).169 (1.09).0078 (.32).0192 (.31).215 (.55).0155 (.65).0382 (.63).303 (.77) Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual. Beam Loading Uniform Deflection = Beam Span Channel Uniform Load and Deflection 1/240 Span 1/360 Span In. mm Style Lbs. kn In. mm Lbs. kn Lbs. kn 12 (305) B (0.51).051 (1.29) 113 (0.50) 75 (0.32) B72A 210* (0.93).020 (.51) 210* (0.93) 210* (0.93) 24 (609) B72 58 (0.26).206 (5.23) 28 (0.12) 19 (0.08) B72A 159 (0.71).125 (3.17) 127 (0.56) 85 (0.38) 36 (914) B72 39 (0.17).465 (11.81) 13 (0.06) 8 (0.03) B72A 106 (0.45).281 (7.14) 57 (0.25) 38 (0.17) 36 (1219) B72 29 (0.13).827 (21.00) 7 (0.03) 5 (0.02) B72A 80 (0.35).500 (12.70) 32 (0.14) 21 (0.09) 60 (1524) B72 23 (0.10) (32.81) 5 (0.02) 3 (0.01) B72A 64 (0.28).782 (19.86) 20 (0.09) 14 (0.06) Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral bracing (see page 12 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear. Column Loading Max. Column Loading K =.80 Max. Column Loading C.G.) Unbraced Channel Loaded@ Loaded@ Height Style C.G. Slot Face K =.65 K = 1.0 K = 1.2 In. mm Lbs. kn Lbs. kn Lbs. kn Lbs. kn Lbs. kn 12 (305) B (7.11) 539 (2.40) 1712 (7.61) 1410 (6.27) 1181 (5.25) B72A 3600 (16.01) 986 (4.38) 3700 (16.46) 3433 (15.27) 3229 (14.36) 24 (609) B (3.12) 320 (1.42) 1050 (4.67) 450 (2.00) 313** (1.39) B72A 2710 (12.05) 802 (3.57) 3113 (13.85) 2043 (9.09) 1421 (6.32) 36 (914) B72 313** (1.39) 188 (0.83) 473 (2.10) 201** (0.89) B72A 1421 (6.32) 569 (2.53) 2135 (9.50) 909 (4.04) 631** (2.81) 36 (1219) B72 177** (0.79) 122 (0.54) 267** (1.19) B72A 799 (3.55) 404 (1.80) 1211 (5.39) 512** (2.28) 355** (1.58) 60 (1524) B72 113** (0.50) 85 (0.38) 171** (0.76) B72A 512** (2.28) 298 (1.32) 775 (3.45) 327** (1.45) **Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration. r 244
4 Mini Channel Nuts & Fittings Nuts for, B72 Channel Spring Nut Nut Without Spring Part Number B72 With Without With Without Thread Thickness Wt./C Spring Spring Spring Spring Size In. mm Lbs. kg N621 N621WO N7221 N621WO # (3.81) 1.0 (.45) N622 N622WO N7222 N622WO # (3.81) 1.0 (.45) N627 N627WO N7227 N627WO # (3.81) 1.0 (.45) N624 N624WO N7224 N624WO 1/ (3.81) 1.0 (.45) BMM-3L BMM-3 BMM-3S BMM-3 M3.5 x (3.81) 1.0 (.45) BMM-4L BMM-4 BMM-4S BMM-4 M4 x (3.81) 1.0 (.45) BMM-5L BMM-5 BMM-5S BMM-5 M5 x (3.81) 1.0 (.45) BMM-6L BMM-6 BMM-6S BMM-6 M6 x (3.81) 1.0 (.45) 02 Square Washer Wt./C 2 Lbs. (.9 kg) B6129 Two Hole Splice Plate Wt./C 5 Lbs. (2.2 kg) B6340 Two Hole Splice Plate Wt./C 5 Lbs. (2.2 kg) 9 /32 (7.1) DIA. 245
5 B6141 Three Hole Splice Plate B Three Hole Flat Adapter Plate Wt./C 19 Lbs. (8.6 kg) B6557 Three Hole Splice Plate 4 1 /8 (104.8) 2 7 /16 (61.9) B22 B6341 Four Hole Splice Plate Wt./C 11 Lbs. (5.0 kg) 4 (101.6) B6138 Two Hole Swivel Plate 2 11 /16 (68.2) B6139 Three Hole Swivel Plate Wt./C 10 Lbs. (4.5 kg) 3 3 /4 (95.2) B6504 Four Hole Splice Plate Wt./C 10 Lbs. (4.5 kg) B6140 Three Hole Corner Plate Wt./C 8 Lbs. (3.6 kg) B6143 Four Hole Corner Plate Wt./C 11 Lbs. (5.0 kg) 246
6 B6133 Four Hole Tee Plate Wt./C 11 Lbs. (5.0 kg) B6132 Five Hole Cross Plate Wt./C 13 Lbs. (5.9 kg) B6135 Three Hole Corner Gusset Plate Wt./C 9 Lbs. (4.1 kg) B6142 Four Hole Corner Gusset Plate Wt./C 15 Lbs. (6.8 kg) B6337 Three Hole Tee Gusset Plate Wt./C 10 Lbs. (4.5 kg) B6136 Four Hole Tee Gusset Plate Wt./C 15 Lbs. (6.8 kg) B6532 Five Hole Tee Gusset Plate Wt./C 22 Lbs. (10.0 kg) B6101 Two Hole Corner Angle Wt./C 5 Lbs. (2.2 kg) 30 Two Hole Corner Angle Wt./C 5 Lbs. (2.2 kg) 1 1 /4 (31.7) 1 1 /8 (28.6) 247
7 B6102 Three Hole Corner Angle Wt./C 8 Lbs. (3.6 kg) B6103 Three Hole Corner Angle Wt./C 8 Lbs. (3.6 kg) 32 Three Hole Corner Angle 1 1 /4 (31.7) 2 3 /16 (55.5) B6374 Three Hole Corner Angle 1 1 /8 (28.6) B6104 Four Hole Corner Angle Wt./C 10 Lbs. (4.5 kg) B6558 Four Hole Corner Angle Wt./C 10 Lbs. (4.5 kg) 1 1 /4 (31.7) 2 (50.8) B6357 Four Hole Offset Bent Tee Wt./C 11 Lbs. (5.0 kg) 39 Five Hole Offset Bent Tee Wt./C 14 Lbs. (6.3 kg) B6144R & L Four Hole Shelf Bracket Wt./C 19 Lbs. (8.6 kg) 1 1 /8 (28.6) 1 1 /8 (28.6) (Right shown) 248
8 B6134R & L Four Hole Corner Gusset Wt./C 15 Lbs. (6.8 kg) 34R & L Four Hole Corner Gusset Wt./C 15 Lbs. (6.8 kg) B6118 Four Hole Gussetted Shelf Angle Wt./C 15 Lbs. (6.8 kg) (Left shown) 2 3 /16 (55.5) (Left shown) B6533 Five Hole Gussetted Shelf Angle Wt./C 22 Lbs. (10.0 kg) B6126 Four Hole Gussetted Three Way Shelf Angle Wt./C 15 Lbs. (6.8 kg) 1 1 /4 (31.7) B6127 Five Hole Gussetted Three Way Shelf Angle Wt./C 18 Lbs. (8.1 kg) B6112 Four Hole Adjustable Corner Angle Wt./C 32Lbs. (14.5 kg) B Two Hole 90 Adapter Angle Wt./C 11 Lbs. (5.0 kg) 9 /32 (7.1) x 3 /4 (19.0) Slots 2 7 /16 (61.9) 4 (101.6) 2 3 /16 (55.5) B /32 (38.9) 249
9 B6147-B6152 Two Hole Open Angle B C B6154 Two Hole Open Angle Wt./C 8 Lbs. (3.6 kg) B C Wt./C Part No. A In. mm In. mm Lbs. kg B /2 2 1 /32 (51.6) 27 /32 (21.4) B /32 (51.6) 27 /32 (21.4) B /2 2 (50.8) /8 (22.2) B /32 (50.0) 1 5 / (3.6) B /2 1 1 /16 (27.0) B /2 2 (50.8) 29 /32 (23.0) 1 23 /32 (43.6) 1 3 /16 45 (30.1) B6162-B6165 Two Hole Open Angle 1 1 /32 (26.2) Wt./C Part No. A Lbs. kg B B /2 8.0 (3.6) B B /2 A B6155 Two Hole Closed Angle Wt./C 8 Lbs. (3.6 kg) /16 (39.7) B6156-B6161 Two Hole Closed Angle A B B Wt./C Part No. A In. mm Lbs. kg B /2 1 9 /32 (32.5) B /16 (33.3) B /2 1 3 /8 (34.9) B (35.7) 8.0 (3.6) B / /32 (37.3) B / /32 (42.0) 250
10 B Two Hole 45 Adapter Angle Wt./C 14 Lbs. (6.3 kg) B6167 Four Hole Splice Clevis for B72 Wt./C 24 Lbs. (10.9 kg) B6172 Four Hole Splice Clevis for Wt./C 36 Lbs. (16.3 kg) 1 13 /64 (30.5) 45 B22 B72 4 (101.6) 4 (101.6) B7116 Three Hole U-Support Wt./C 10 Lbs. (4.5 kg) B6107 Three Hole U-Support Wt./C 12 Lbs. (5.4 kg) 2 31 /32 (75.4) 2 31 /32 (75.4) B A Three Hole U-Support Wt./C 16 Lbs. (7.2 kg) B6594 Five Hole U-Support Wt./C 13 Lbs. (5.9 kg) 2 21 /32 (75.4) 2 31 /32 (75.4) 3 17 /32 (89.7) 251
11 B6173 Four Hole Clevis Wt./C 9 Lbs. (4.1 kg) B6526 Two Hole Offset Z-Support Wt./C 5 Lbs. (2.2 kg) B6105 Two Hole Offset Z-Support for 1 21 /32 (42.0) 1 /8 (3.2) 1 3 /4 (44.1) B7105 Two Hole Offset Z-Support for B72 B6110 Two Hole Offset Z-Support for A Wt./C 9 Lbs. (4.1 kg) 1 3 /4 (44.1) 1 3 /4 (44.1) B6108 Two Hole Offset Z-Support B Two Hole Z-Adapter Plate Wt./C 28 Lbs. (12.7 kg) 1 3 /4 (44.1) 2 3 /4 (69.8) B22 252
12 05 End Cap for Material: ASTM A1008 SS Gr. 33 Type 1 Wt./C 3 Lbs. (1.3 kg) B7205 End Cap for B72 Material: ASTM A1008 SS Gr. 33 Type 1 Wt./C 1 Lb. (.4 kg) 11 Z-Beam Clamp 5 /16-18 Setscrew included Max. Flange Thickness Material: ASTM A36 Wt./C 13 Lbs. (5.9 kg) 3 /4 (19.0) 1 /4 (6.3) B6409-6, 9 Bracket Safety Factor of 2 Uniform Design Load 40 Lbs. (.18 kn) A Wt./C Part No. In. mm Lbs. kg B (152.4) 28.0 (12.7) B (228.6) 35.0 (15.8) B2308-B2315 One Hole Tubing Strap Material: Sizes 1 /4-1 /2, ASTM A611 Gr. C 5 /8-1, ASTM A1008 SS Gr. 33 Type 1 A B2350-B2355 One Hole Double Tubing Strap Material: ASTM A1008 SS Gr. 33 Type 1 C 9 /32 (7.1) Dia. B O.D. Size O.D.Size Wt./C A B C Part No. In. mm In. mm In. mm Lbs. kg B2350 1/4 (6.3) 1/4 (6.3) 3/4 (19.0) 1.2 (.5) B2351 3/8 (9.5) 3/8 (9.5) 1 (25.4) 2.0 (.9) B2352 1/2 (12.7) 1/2 (12.7) 1 1 /4 (31.7) 2.9 (1.3) B2353 1/4 (6.3) 3/8 (9.5) 7/8 (22.2) 1.6 (.7) B2354 1/4 (6.3) 1/2 (12.7) 1 (25.4) 2.1 (.9) B2355 3/8 (9.5) 1/2 (12.7) 1 1 /8 (28.6) 2.5 (1.1) A O.D. Size A B C Wt./C Part No. In. mm In. mm In. mm Lbs. kg B /4 (6.3) 1 1 /32 (26.2).048 (1.2) 1.2 (.5) B /16 (7.9) 1 3 /32 (27.8).048 (1.2) 1.4 (.6) B /8 (9.5) 1 3 /16 (30.1).048 (1.2) 1.6 (.7) B /2 (12.7) 1 21 /64 (33.7).048 (1.2) 1.9 (.8) B /8 (15.9) 1 25 /64 (35.3).062 (1.6) 2.7 (1.2) B /4 (19.0) 1 39 /64 (40.9).075 (1.9) 4.3 (1.9) B /8 (22.2) 1 51 /64 (45.6).075 (1.9) 4.9 (2.2) B (25.4) 2 1 /32 (51.6).075 (1.9) 5.2 (2.3) 9 /32 (7.1) Dia. C B A 253
B104ZN BLTD 4H 90 L Bracket. Features. Material, Color, and Finish. Dimensions and Weight. Long Description
B104 BLTD 4H 90 L Bracket Cooper B-Line/Cable Tray Catalog Number Manufacturer Description Weight per unit Product Category Features Material Material, Color, and Finish Finish Dimensions and Weight Size
TAZGO DIVISION. Available Services: Shearing, Plate Burning, Saw Cutting, Drilling
TAZGO DIVISION STEEL~STAINLESS~ALUMINUM Beams ~ Channel ~ Flat bar ~ HR Rounds ~ CR Rounds Angle ~ Square Tube ~ Rectangle Tube Pipe~ DOM~ Plate~ HR sheets ~ CR sheets~ Galvanized Sheets ~ Cross Members
for Cold-Formed Steel Framing Products
Technical Guide for Cold-Formed Steel Framing Products Technical Data in this publication is applicable to the following SFIA Member Company: For a complete directory of SFIA Members who are certified
Channel Nuts & Hardware
Channel Nuts Channel nuts are one of the main components of our strut system. It is designed to provide essential gripping power and ease during installation. Channel nuts are press formed, machined and
CHANNEL & SUPPORT SYSTEMS
Total Cable Management Solutions CHANNEL & SUPPORT SYSTEMS Unitrunk Intelok Channel is a strong, easy to erect support system, ideal for supporting cable trays, cable ladders, pipes and ducting and is
for Cold-Formed Steel Framing Products
Technical Guide for Cold-Formed Steel Framing Products The data in this guide is based upon the 2007 American Iron and Steel Institute s S00-07 North American Specification for the Design of Cold-Formed
Now with SUPREME FRAMING SYSTEM! PRODUCT TECHNICAL GUIDE. Steel Stud Manufacturers Association
Now with SUPREME FRAMING SYSTEM! PRODUCT TECHNICAL GUIDE Steel Stud Manufacturers Association 2507 3064P Product Identification "S" and "SFS" - C-STUD/JOIST S and SFS-SECTIONS* * For "S" and "SFS" members,
TABLE OF CONTENTS PRODUCTS & INFORMATION
SHORING CATALO G TABLE OF CONTENTS PRODUCTS & INFORMATION PAGE HL SHORING FRAMES (10k/leg)...3 STEEL SHORING ACCESSORIES... 4 SHORING TOWER... 5 SHORING JACK... 6 SHORING FRAME ALLOWABLE WORKING LOADS...7
INTRODUCTION. Disclaimer
3 INTRODUCTION The Steel Framing Industry Association (SFIA) was formed with the objective of assisting companies having interests in the cold-formed steel framing industry to be more successful by unifying
Ring-Loc System Technical Manual
FORMWORK & SCAFFOLDING Ring-Loc System Technical Manual Canada: CAN/CSA S269.2 M87 USA: ANSI/ASSE A10.8-2001 Ring-Loc System Technical Manual 2015 United Scaffold Supply Company Inc info@unitedscaffold.ca
Product Identification
Product Identification All SCAFCO products have a four part identification code which identifies the size (both depth and flange width), style, and material thickness of each member. Example: Member Depth:
& WIZARD ACCESSORIES
& WIZARD ACCESSORIES 1 Strut Channels 2 Hardware 3 Fittings & Accessories 4 Clamps 5 Inserts & End Caps 6 Slotted Angle & Pipe Supports 7 Engineering Data G-Strut Metal Framing Division 4100 13th Street
l DESCRIPTION l FEATURES l LIMITATIONS l TYPICAL APPLICATIONS l MATERIAL SPECIFICATIONS TECHNICAL MANUAL SECTION 2.3 PAGE 1 / 6
www.ucanfast.com TECHNICAL MANUAL SECTION 2.3 PAGE 1 / 6 l DESCRIPTION The UCAN WAG anchor is a fully threaded torque controlled expansion anchor assembled with a three segment expansion clip. All parts
REPORT HOLDER: FRAMECAD LICENSING LTD. POST OFFICE BOX 1292 AUCKLAND 1140 NEW ZEALAND EVALUATION SUBJECT: COLD FORMED STEEL C SHAPES AND TRACKS
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2361 Reissued 05/2017 This report is subject to renewal 05/2019. DIVISION: 05 00
General Information Gravity roller conveyors are available in many sizes and configurations as shown on the following pages. There are many factors to consider when selecting a gravity conveyor. The following
Anchor Component Material Standard Mechanical Properties
SECTION 4.1 PAGE 1 / 5 l description The UCAN sleeve anchor is a light-medium duty anchor ideal for applications in concrete, hollow block and brick. It is a mechanical expansion anchor assembled with
5. STRUCTURAL ANALYSIS
5. STRUCTURAL ANALYSIS The skeletal structure of the experiment casing is constructed from UNISTRUT with all experiment equipment mounted by UNISTRUT provided fasteners. All maximum loads for nuts, bolts,
BARRIER OFFSET 0" A 6" 6" A 12" 12" A 26" A 26" 3A OR 4A L OR S * ** L OR S L OR S
ACCEPTABLE (TCB) TYPES AND ANCHORING DETAILS BASED ON UNDERLYING SURFACE TYPE AND BARRIER OFFSET FROM DROP-OFF BARRIER OFFSET UNDERLYING SURFACE 0" A 6" 6" A 12" 12" A 26" A 26" TCB TYPE DETAIL TCB TYPE
THREADED ROD & ACCESSORIES. Superior strength, maximum versatility.
Superior strength, maximum versatility. GRTRBRO 12/2013 Threaded rod is used for general purpose fastening and installation. Used in any place that a long bolt is required, threaded rod can be cut to the
WEDGE-ALL Wedge Anchors
WEDGE-ALL Wedge Anchors The Wedge-All wedge anchors are a non-bottom bearing, wedge-style expansion anchor for use in solid concrete or grout-fi lled masonry. A one-piece clip ensures uniform holding capacity
Full Service Warehouse
DIRECT FAX (320) 235-1816 110 19th Street NW P.O. Box 1178 Willmar, Minnesota 56201 (320) 235-4070 1-800-992-8853 1-800-328-8994 Full Service Warehouse 3-D LASER SHEARING BREAKING FLAME CUTTING PLASMA
FULL HEX RIVET NUT INSERT
Fastening Systems Engineered For Performance FULL HEX RIVET NUT INSERT THE NEW STANDARD IN RIVET NUTS AS9100, ISO 9001:2008 AND ISO/TS 16949:2009 CERTIFIED FEATURES AND BENEFITS Proven to meet Class 8
Continental Industries STEEL SERVICE TEES or FAX Visit
Continental Industries STEEL SERVICE TEES 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
Operations and Instruction Manual Might Swivel Model # Concrete and Steel Anchorage Connector ANSI Z ,000 lbs / 44kn
Operations and Instruction Manual Might Swivel Model # 00238 Concrete and Steel Anchorage Connector ANSI Z359.1 10,000 lbs / 44kn Description: Zinc plated forged heat treated steel, Special design gives
Submittal / Substitution Request
Submittal / Substitution Request SUBMITTED TO: To: Firm: Project: Submitted Product: SIMPSON STRONG-TIE WEDGE-ALL WEDGE ANCHOR Specified Product: Section: Page: Detail/Sheet No.: Description of Application:
Mechanical Anchoring Systems HDA Undercut Anchor Product description. HDA-P Undercut Anchor Pre-Set Type
Mechanical Anchoring Systems 3.3 3.3.1 HDA Undercut Anchor 3.3.1.1 Product description The Hilti HDA undercut anchor is a heavy-duty mechanical anchor with carbide-tipped undercut segments used to perform
New MacLean-Dixie 4-1/2 Strength Squared Pipe Piles/Anchors (Patent Pending) for Compression and Tension Applications
Page: 1 of 6 New MacLean-Dixie 4-1/2 Strength Squared Pipe Piles/Anchors (Patent Pending) for Compression and Tension Applications P45 Series 4-1/2 (O.D.) Schedule 40 Pipe Pile Torque Capacity (ft-lbs)
Football Equipment. 5 9/16" Gooseneck Goalposts
5 9/16" Gooseneck Goalposts Football Equipment FB55CG 5 9/16" Gooseneck College Goalposts Applies also to FB55CG-SY and FB55CG-WT Goalposts shall meet all NCAA rules. Goalposts shall be of the single bent
Parts Manual. Scraper Hitches PH:
Parts Manual Scraper Hitches 12-18 1 Table of Contents A123299 Swivel Hitch 3 A1063527 Super Swivel Hitch 4 A125056 Yoke Hitch 5 A125057 Super Capacity Hitch 6 A125223 MDU Hitch 7 A123224 360 Swivel Hitch
ASYBCO 90 O ELBOW LONG RADIUS O.D. I.D.
90 O ELBOW LONG RADIUS Standard weight Extra strong Schedule 160 Double extra strong ASTM A-234 ASME / ANSI B16.9 Carbon and ferritic alloy steel Produced from X-rayed, stress-relieve welded pipe. Welds
Foundation Products. Poured In Ground Anchor Bolts E1 - E4. Structural Foundations E5 - E12. Copyright 2016 s Industry Inc. SIE-RA-CMP EN
Foundation Products Poured In Ground Anchor Bolts E1 - E4 Structural Foundations E5 - E12 EA EB Poured in Ground Anchor Bolts Layout SIEMENS Anchor Bolts 131702-4X shown for reference purposes only! Actual
New MacLean-Dixie 3-1/2 Strength Squared Pipe Piles/Anchors (Patent Pending) for Compression and Tension Applications
Page: 1 of 6 New MacLean-Dixie 3-1/2 Strength Squared Pipe Piles/Anchors (Patent Pending) for Compression and Tension Applications ICC AC358 Acceptance Criteria for Foundation Systems and Devices APPLICATION
TorqBolt Wedge Anchors Torque Controlled Expansion Anchor
TorqBolt Wedge Anchors Torque Controlled Expansion Anchor Product Description The Torqbolt wedge anchor is a torque-controlled, wedge expansion anchor for heavy duty fastening applications where high pull
Continental Industries TRANSITION FITTINGS or FAX Visit
Continental Industries TRANSITION FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
TZ WEDGE ANCHOR FOR CRACKED AND UNCRACKED CONCRETE
www.ucanfast.com TECHNICAL MANUAL SECTION 2.2 PAGE 1 / 10 ä DESCRIPTION UCAN TZ torque controlled mechanical expansion wedge anchors have a Category 1 classification. They are used to resist static, wind
COMPFIRE CCFT-FP_550_55_ September 2010 Fin Plate Connection to Circular Concrete-Filled Tube Test Result
Reaction Frame Macalloy Bars Camera 3 Support Beam α Oven Bar Camera 2 Link Bar Camera 1 Tested Connection Jack Bar Electrical Furnace Reaction Frame Load Jack v2_5 April 2011 1 Oven Bar Link Bar View
6.0 ENGINEERING. Build Anything Better. REPRINTED 2017
6.0 ENGINEERING TABLE OF CONTENTS 6.1 U.S. ENGINEERING ANALYSIS REPORT... P. 6-3 BELOW-GRADE WALL REINFORCEMENT TABLES... P. 6-5 ABOVE-GRADE WALL REINFORCEMENT TABLES.. P. 6-21 LINTEL REINFORCEMENT TABLES...P.
Structurals Rationalised sizes of Beams/Joists, Channels and Angles
Structurals Rationalised sizes of Beams/Joists, Channels and Angles Section Dimensions Sectional Weight Length mm kg/m m Beams/Joists Beams Durgapur Steel Plant 175 x 85 x 5.8 19.6 Std length 200 x 100
Precision Duct Systems 4570 Commerce Cir SW Atlanta, GA Phone (404)
Project Name: Engineer: Contractor: Section Number: Date Submitted: Date Approved: Pressure Class: Material Type: Connections: 2005 Up to 10 wg 1995 2 wg pos 1995 4 wg pos 1995 10 wg 2005 neg WG: 1995
Cooper B-Line Replacements for Discontinued TOLCO Figure Numbers. Pipe Hangers/Pipe Supports...1. TOLCO Figure Numbers with Continued Availability...
Product Transition Guide March 2012 Table of Contents In October 2011, announced the acquisition of. The addition of s seismic bracing and fire protection solutions builds upon s broad solution portfolio
NEW FEDERAL RULES BREAKAWAY SIGN SUPPORTS ARE REQUIRED
NEW FEDERAL RULES BREAKAWAY SIGN SUPPORTS ARE REQUIRED The Manual on Uniform Traffic Control Devices (MUTCD), which is the national standard used for all roads open to public travel, states that roadside
TUBE SIGN POST PRODUCTS
Western Canada TUBE Products Ltd. SIGN POST PRODUCTS Company Profile With over 100 years of experience on staff and the largest inventory in Western Canada, we have the ability to meet all your sign support
Glass Steel, Inc. Fiberglass Composite Troughs
Glass Steel, Inc. Fiberglass Composite Troughs El Mira, CA Flat Bottom Curved Troughs Glass Steel, Inc. FIBERGLASS COMPOSITE TROUGHS Glass-Steel, Inc. manufactures a proprietary system of composite effluent
Quality Plastic Pipe Fittings. Technical Data. Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed
Quality Plastic Pipe Fittings Technical Data Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed Effective April 1, 2002 PIPE DIMENSIONS IPS-IRON PIPE SIZE Minimum
Ford Service Saddles and Tapping Sleeves
Section AA 5/2001 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487
GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS
GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS CONTINENTAL INDUSTRIES, INC. The Ultimate Connection CONTINENTAL INDUSTRIES, INC. ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, Inc.,
INSTRUCTIONS 360 Y-DROP HAGIE STS 2015
INSTRUCTIONS 60 Y-DROP HAGIE STS 05 INSTRUCTIONS 60 Y-DROP HAGIE STS 05 INTRODUCTION Before beginning, it s important to know where each mounting bracket fits relative to the row spacing involved. The
SPIRAL PIPE - OVAL SINGLE WALL
SPIRAL PIPE - OVAL SINGLE WALL Duct Direct Pipe and Fittings are manufactured in accordance with 2005 SMACNA Duct Construction Standards (1995 SMACNA Standards on request) OVAL SUBMITTAL Oval Single Wall
OPERATION AND INSTRUCTION MANUAL Swivel Anchor Model: SWY100N
OPERATION AND INSTRUCTION MANUAL Swivel Anchor Model: SWY100N IMPORTANT!!! ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH.
CHEMICAL. Straight cut rod is provided in the materials listed below and includes nuts / washers.
161 STRAIGHT CUT ROD Straight cut rod is provided in the materials listed below and includes nuts / washers. Straight Rod 22-1/2 Bent Rod A 307 THREADED ANCHOR ROD, ZINC PLATED (ASTM B633, CLEAR CHROMATE)
Drop-In Internally Threaded Anchor (DIAB) Mechanical Anchors. Key features. Material: Carbon steel. Coating: Zinc plated
Drop-In Internally Threaded Anchor (DIAB) Expansion shell anchors for use in solid base materials Simpson Strong-Tie introduces a new, redesigned Drop-In Anchor (DIAB) that provides easier installation
OPERATION AND INSTRUCTION MANUAL Swivel Anchor Model: HD26248
OPERATION AND INSTRUCTION MANUAL Swivel Anchor Model: HD26248 IMPORTANT!!! ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH.
threaded rod Keystock Diamond Case Linear Shafting strapping seals tools
threaded rod Keystock Diamond Case Linear Shafting strapping seals tools THREADED STEEL ROD... 19-2 KEY STOCK... 19-2 STEEL STRAPPING... 19-3 DIAMOND CASE SHAFTING Carbon (1060) Standard Sizes... 19-4
RSL TOWER KITS RSLL-01-A1 RSL GENERAL NOTES
SECTION P/N R10H R9H R8H R7 R6 R5 R4 R3 R R1 LENGTH RSLL-1 RSLL- RSLL-3 RSLL-4 RSLL-5 RSLL-6 RSLL-7 RSLL-8 U 3/4" X 1/4" (U 70 X 6.4 mm) RSLL-9 U 3/4" X 1/4" (U 70 X 6.4 mm) RSLL-10 U 3/4" X 1/4" (U 70
HANGERS & SUPPORTS CLIP-IT CLIP-IT STUD STRAPS BAR JOIST CLIP CONDUIT HANGERS CLIP-IT
62 hangers & supports Innovation. It s what Madison is all about. Check out our Madison Strap, the product that started it all. Invented in 1929 by our founder Earl Adkinson, Madison has been on the cutting
Thank you for purchasing a Porta-Dock product! *Please read and follow these instructions step by step*
PG 1 OF 9 PORTA-DOCK, INC. 74A ABL/APW 1056 & 44A FLB APW 1056 PORTA-LIFT Thank you for purchasing a Porta-Dock product! *Please read and follow these instructions step by step* STEP 1. Separate and group
Superstrut. Metal Framing. Surface Raceway and Lighting Systems
Material Superstrut electrical raceway, fixture hanging channel, closure strip and accessories are manufactured from hot rolled strip steel. Standard finish for the accessories is GoldGalv. Design Data
Code Compliance Research Report CCRR-0145
Code Compliance Research Report CCRR-0145 Issue Date: 11-16-2009 Revision Date: 11-29-2018 Renewal Date: 11-18-2019 DIVISION: 05 - Metals Section: 05 50 00 Metal Fabrications Marshall Stamping Company
IBS, INCORPORATED Index Washers W A S H E R S. Washers, Lock Alloy C-8 External Tooth C-10. Internal Tooth C-10
IB, INCOPOTD Index ashers ssortments Flat asher Copper C-11 Fender asher C-9 eavy Duty C-5 Lock asher Internal & xternal tar asher C-10 ur-lock Vibration-esistant ashers C-7 Back-Up ashers luminum ound
Tower Accessories & Hardware
Safety-Climb Cable System for Climbing Ladder These Safety-Climb Cable products clamp to climbing ladder rungs up to 1-1/4" (32 mm) in diameter. The products meet or exceed OSH requirements for climbing
SERIES 2 RAMP OWNER S MANUAL TOOLS REQUIRED: BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup.
SERIES 2 RAMP OWNER S MANUAL BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup. Use caution and care for your back when lifting, pushing, pulling, folding or unfolding
ORNAMENTAL CANTILEVER GATE INSTRUCTIONS
U.S.A. Patent Number 5,36,83 ORNAMENTAL CANTILEVER GATE INSTRUCTIONS *NOTICE: Ornamental Cantilever Gates are supplied with rolls of 2 mesh safety screening in sufficient quantities to cover the entire
PTRE Series Track Roller Assembly Plain/Cylindrical Stud Type Eccentric Ball & Tapered Roller Bearings
PTRE Series Assembly A B C D ED EL EO F FL H SD SL T -.001 Width Dia -.002 Offset Hex Shld Width + PTRE-1.00 1.000 0.75 0.437 1.00 0.625 0.48 0.03 7/16-20 0.52 3/16 0.7 0.03 0.78 PTRE-1.125 1.125 0.75
pvc well casing & drop pipe
C e r t a i nte e d pvc well casing & drop pipe P V C We l l P r o d u c t s Sure Fit PVC well casing and drop pipe have gained broad acceptance since their introduction almost 40 years ago. Today, due
OWNERS MANUAL. Foldable Topside Creeper Model ATD-8116F
OWNERS MANUAL Foldable Topside Creeper Model ATD-8116F Please read and understand all safety advisories and operating instruction in this manual to ensure safe and productive operation of your new Topside
Superstrut. Metal Framing. Surface Raceway and Lighting Systems. Material. Design Data. Electrical Raceway
Material Superstrut electrical raceway, fixture hanging channel, closure strip and accessories are manufactured from hot rolled strip steel. Standard finish for the accessories is GoldGalv. Design Data
Residential Fence Tubing
Residential Fence Tubing RESIDENTIAL FENCE TUBING Approximate Pieces Price Per Foot Size O.D. Item# Gauge Weight Per Foot Per Lift Cut Less Lift Lift 1 3/8 PE 20100-18.67 91 1.30 1.13 1 3/8 Swedge 20200-18.67
A COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32
A COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32 Component Flat Washers Component Flat Washers The Largest Selection in the World! Steel, Stainless Steel and Brass The standard Flatwasher
DOUG GARDEI S TITAN MISSILE
DOUG GARDEI S TITAN MISSILE Titan AE - Top Fin set - Custom, Material: Balsa Page 1 of 1 Titan AE - Main - Custom, Material: Balsa Page 1 of 1 Titan AE - Fin set - Custom, Material: Balsa Page 1 of 1 Titan
pneumatic power clamps
pneumatic power clamps Features Király Trading KFT H-1151 Budapest Mogyoród útja 12-14 E-mail:_agi@kiralytrading.hu Your requirements Power element of machines, tools and devices for the following applications:
steel wire cable tray system accessories
accessories Marco Cable Management has further enhanced its reputation, by the continued growth in innovative products and supportive accessories. Marco has also invested heavily in new state of the art
PTR Series Track Roller Assembly Plain/Cylindrical Stud Type Concentric Ball & Tapered Roller Bearings
PTR Series Assembly A B C D F FL H SD SL T Width Hex Width + PTR-1.00 1.000 0.75 0.437 1.00 7/16-20 0.50 3/16 0.5 0.03 0.78 PTR-1.125 1.125 0.75 0.437 1.00 7/16-20 0.50 3/16 0.5 0.03 0.78 PTR-1.25 1.250
DICTATOR "DIREKT" Gate Closer
DICTATOR "DIREKT" Gate Closer For Access Gates in Boundary Fences The DICTATOR gate closer DIREKT is the economic solution for the controlled closing of outside gates, such as admission gates to kinder
FTR Series Track Roller Assembly Flanged Stud Type Concentric Ball & Tapered Roller Bearings
FTR Series Track Assembly d Type Concentric Ball & Tapered Bearings Type Track A B C D F FL H L M SD SL T Hex Dia + FTR-1.00 1.000 0.75 0.437 1.00 7/16-20 0.50 3/16 1.38 0.22 0.5 0.03 0.78 FTR-1.125 1.125
Stainless Steel Straps
Stainless Steel s Stainless Steel s Nuts Nuts for use with alloy steel s New S SH Nut Code Old S SH escription AN365 self-locking, cadmium-plated steel with non-metallic insert AN363 self-locking high-temperature,
Livestock Equipment Bale Movers/ Bale Spears. Tractor Linkage. Grade 5 & 8 Hitch Pins. Tractor Linkage
Hooking a piece of equipment to your tractor? Our selection of hitch pins, locking pins, lift arm/top link parts, PTO adapters will keep things connected. Make sure you have an SMV sign to keep everyone
STRONGER THAN STEEL SṂ
ProSTUD product catalog STRONGER THAN STEEL SṂ DRYWALL FRAMING SYSTEM ProSTUD D R Y W A L L FRAMING SYSTEM ClarkDietrich. WHERE INNOVATION TAKES FORM. 3 The ProSTUD Drywall Framing System can be called
- Written price quotations are valid for 30 days from the date of the quote unless otherwise noted.
SPECIFICATIONS - All material is solid brass with a #8 mirror finish unless otherwise noted. - All material sold by length is priced in one foot increments. ORDERING PROCEDURE - Use a Purchase Order number.
OPERATION AND INSTRUCTION MANUAL
OPERATION AND INSTRUCTION MANUAL Dual Extension Swivel Anchor Model: SWD100N-036 WARNING: ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS
SLEEVE AND COLLAR MOUNT FREESTALLS
SLEEVE AND COLLAR MOUNT FREESTALLS FREESTALLS-1 FEATURES Hot dipped galvanized or pre-galvanized loop option. Heavy galvanized 3 1/2 post Easy installation Adjustable height Cow friendly loop profile to
Use equation for the cylindrical section and equation or for the ends.
Solution 13.1 See section 13.3.4, equations 13.7 to 13.18 Solution 13.2 Use equation 13.34. (a) rigid constant C = 0.43 (b) free to rotate, C = 0.56 Solution 13.3 See section 13.5.1 Use equation 13.39
Pier Port single sided 12' x 18' full set (including adapter post AP1, nic dock brackets)
Pier Port 600 Series Pier Port 500 Series Pier Port S100 Series Pier Port single sided 12' x 18' full set $3,990 Pier Port single sided 12' x 21' full set $4,390 Pier Port single sided 12' x 24' full set
Rig Fittings. PW 8c Turn Buckle 2.5mm, 3mm or 4ba chromed brass wire type. (3mm suits 1m or M, 4ba for 10r and RA class). 3.05
26 PW 8c Turn Buckle 2.5mm, 3mm or 4ba chromed brass wire type. (3mm suits 1m or M, 4ba for 10r and RA class). 3.05 pw8c PW 8d Turn Buckle 4ba alloy black anod. wire type, less than 1/2 weight of chromed
CHAINLESS ANCHORING SYSTEM USER MANUAL
CHAINLESS ANCHORING SYSTEM USER MANUAL Introduction..................................................... 1 Setting up the Chainless Anchoring System............................ 4 Set up Procedure............................................
Made in the USA. For Fall Protection Only. SafeLok Part Description
Operations and Instruction Manual SafeLok Anchorage - Model # 4011 IM-0051 REV A Portable Concrete and Steel Anchorage Connector ANSI Z359.1-07 5,000 lbs / 22kn Made in the USA The 3/4 Fall Protection
Expanding Your Solutions. Viper-X Product Catalog. Interior Non-Load Bearing Wall Framing
Expanding Your Solutions Viper-X Product Catalog Interior Non-Load Bearing Wall Framing Effective 04/26/2018 Viper-X is the solution you ve been waiting for: BIGGER, BETTER, STRONGER! YOU demand a better
INTRODUCTION TABLE OF CONTENTS
2 INTRODUCTION Thank you for choosing Servometer to design and manufacture your unique, new electrodeposited bellows for your particular application. The definitions, formulas and design parameters inside
VTRE Series Track Roller Assembly V-Grooved Stud Type Eccentric Ball & Tapered Roller Bearings
VTRE Series Track Assembly V-Grooved Type entric Ball & Tapered Bearings VTRE-3.50E A B C D ED EL EO F FL G H P SD SL T Type Track Width Dia -.002 Offset Groove Center Hex Point Shoulder Shoulder Width
Operator s/parts Manual
Operator s/parts Manual 24 & 30 Folding No-Till Drill Harrow Manufacturing, Inc. P.O. Box 5060 Salina, Kansas 67402-5060! Read the Operator s manual entirely. When you see this symbol, the subsequent instructions
TECHNICAL MANUAL. COPRA Anchoring Coupler. For Smart Bolted Connections
TECHNICAL MANUAL Anchoring Coupler For Smart Bolted Connections Version: PEIKKO GROUP 03/2017 Anchoring Coupler For bolted connections Multi-purpose anchoring system for all bolted connections Simplifi
! CAUTION! ! WARNING! General Information
Great Plains Mfg., Inc. Installation Instructions Used with: 2SF24, 24-Foot Two-Section Drill General Information Two-Section, Hydraulic Folding Marker 2SF30, 30-Foot Two-Section Drill 2SBM30, 30-Foot
Code Compliance Research Report CCRR-0145
Code Compliance Research Report CCRR-0145 Issued: 11-16-2009 Renewal Due: 11-18-2018 Revised: 11-28-2017 DIVISION: 05 - Metals Section: 05 50 00 Metal Fabrications MARSHALL STAMPING COMPANY 355 Glade Mills
STRONGER THAN STEEL SṂ
ProSTUD product catalog STRONGER THAN STEEL SṂ DRYWALL FRAMING SYSTEM ProSTUD D R Y W A L L FRAMING SYSTEM ClarkDietrich. WHERE INNOVATION TAKES FORM. The ProSTUD Drywall Framing System can be called many
Nominal Wall Thickness Steel Only in. (mm) Outside Diameter With PVC in. (mm)
PVC-Coated Conduit The ultimate in corrosion protection! OCAL-BLUE Conduit Hot-dip galvanized steel or aluminum conduit. Nominal.00 ( mils) blue urethane coating on interior. Hot-dipped galvanized threads
Practical Steel Connection Software Design Using AISC 2010 Standard
Practical Steel Connection Software Design Using AISC 2010 Standard Including: Practical Advice for Reviewing Software Generated Connection Designs Steve Ashton, P.E., SECB Limit States that Changed 2
OPERATION AND INSTRUCTION MANUAL Swivel Anchor Model: SWY100N
OPERATION AND INSTRUCTION MANUAL Swivel Anchor Model: SWY100N Patent # US 8,424,638 WARNING: ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS
GUARD RAIL HEIGHT 42" STANDARD FIN. FLR. 12" MAX ANCHOR SPACING WILL DEPEND ON MOUNTING SUBSTRATE AND REGION OF PROJECT
FIN. FLR. STANDARD 8" TO 60" STD. PANEL WIDTH CRL SURFACE MOUNT TYPICAL GLASS RAILING ELEVATION VIEW - 8" TO 60" STD. PANEL WIDTH 1 MAX HORIZONTAL CAP RAIL TYPICAL BUTT JOINTS BETWEEN GLASS PANELS ANCHOR
Other Si min/max. Cr min/max. 0.4/ / / / Bal.
178.46 Specification 3AL seamless aluminum cylinders. (a) Size and service pressure. A DOT 3AL cylinder is a seamless aluminum cylinder with a imum water capacity of 1000 pounds and minimum service pressure
THOR 10 HAMMER CAGE INSTRUCTIONS
75 " 7m 78 4" m 6" 8.8m 45 ".70m 4.9deg 6 4" 6m 44 4".67m 75 " 7m 9 4" 0m 44".m 497 4".64m The 70, Thor Hammer Cage, consists of four heavy duty aluminum net poles. The unique pole structure reduces the
Assembly Instructions. -Cantilever Boat Lifts
Assembly Instructions -Cantilever Boat Lifts Winch Instruction Page Safety Information 1. The winch is built for the multipurpose of hauling and lifting operations. It is not to be used as a hoist for