Meter, PD Model T-11 and T-11NF Parts List

Transcription

1 Form No. P Meter, PD Model T-11 and T-11NF Parts List Issue/Rev. 1.1 (9/11) Bulletin P The Most Trusted Name In Measurement

2 Item G Description Calibrator Version Qty. Part Number Item Description Qty. Part Number 1 Adapter, Calibrator Adjusting Stem Adapter, G Calibrator Bearing, Rotor Block: Standard and All Iron Standard and All Iron, 2,000 SSU to 10,000 SSU Non-Ferrous Bushing, Cover Bushing, Jackshaft: Standard and All Iron Non-Ferrous Calibrator: Manual (Standard) Model G Temperature Corrected, Standard Range... 1 Temperature Corrected, Special Temperature or Gravity xxx 8 Clamp, Oil Tube Collar, Adjusting Collar, Adjusting: G Calibrator Versions All Others Coupling, Drive Cover: Standard and All Iron Non-Ferrous Non-Ferrous, G Calibrator Cover, G Calibrator Cover, Knob Flange, Inlet-Outlet Flange, Packing Gland Page 2 P Issue/Rev. 1.1 (9/11)

3 Item Description Qty. Part Number 17 + Gasket, Drain Plug (Prior Design): Standard and All Iron Non-Ferrous Gasket, G Calibrator Gasket, Inlet-Outlet Gasket, Packing Gland Gear, Calibrator Drive: U.S. Gallons and Litres U.S. Gallons, G Calibrator Imperial Gallons Dekalitres Dekalitres, G Calibrator Gear, Jackshaft: Standard and All Iron Non-Ferrous Gear, Idler Pinion: U.S. Gallons U.S. Gallons, G Calibrator Imperial Gallons Dekalitres Dekalitres, G Calibrator Litres Gear, Jackshaft Pinion: U.S. and Imperial Gallons and Dekalitres Litres Gland, Packing: Buna-N Viton PTFE Brass/Viton, For Non-Ferrous Use Housing Assembly: Standard and All Iron Non-Ferrous Standard and All Iron Non-Ferrous Dowel, Cam Plug, Pipe, 1/2" NPT: Standard and All Iron Non-Ferrous Screw: Standard and All Iron, #10-32 x 1/2" Non-Ferrous, #10-32 x 5/8" Stud Lug, Lifting Nut, Flange, 7/16"-14, UNC-2B O-Ring, Cover: Buna-N Viton Oiler Pin, Adjusting Collar Key Pin, Cotter, 1/16 x 3/8" Pin, Groove, 5/64 x 1/2" Pin, Groove, 1/16 x 5/8" Plate, Thrust Bearing Polytetrafluoroethylene (PTFE). Issue/Rev. 1.1 (9/11) P Page 3

4 Item Description Qty. Part Number 41 Plug, Drain (Current Design): Standard and All Iron Non-Ferrous Plug, Drain (Prior Design): Standard and All Iron Non-Ferrous Retainer and Balls, Thrust Bearing: Standard All Iron Rotor and Blade Assembly: Standard All Iron R Non-Ferrous Blade, Lower: Standard Standard, 2,000 SSU to 10,000 SSU Standard, 200 F Max Standard, 2,000 to 10,000 SSU & 200 F Max Non-Ferrous All Iron All Iron, 2,000 SSU to 10,000 SSU Pin, Cotter: All Iron Standard Pin, Roller, All Versions Roller, Blade: Standard and Non-Ferrous All Iron Blade, Upper: Standard Standard, 2,000 SSU to 10,000 SSU Standard, 200 F Max Standard, 2,000 to 10,000 SSU & 200 F Max Non-Ferrous All Iron All Iron, 2,000 SSU to 10,000 SSU Pin, Cotter: Standard All Iron Pin, Roller, All Versions Roller, Blade: Standard and Non-Ferrous All Iron Block, Blade Clamp, Blade Block Rotor, Sub Assembly: Standard and All Iron Non-Ferrous Screw: Standard and Non-Ferrous, #10-32 x 1/2" All Iron, #10-32 x 5/8" Screw, 1/4-20 x 1/2", Drilled, G Calibrator Screw, 1/4-20 x 1/2", G Calibrator Screw, #10-24 x 3/4" Screw, #10-32 x 1/2" Screw, #10-32 x 7/8" Page 4 P Issue/Rev. 1.1 (9/11)

5 Item Description Qty. Part Number 62 Screw, #6-32 x 5/16" Screw, Cap: Standard and All Iron, 5/16-18 x 5/8" Non-Ferrous, 5/16-18 x 3/4" Screw, Cap, 3/8-16 x 1" Screw, Cap, 5/16-24 x 1-1/4": Standard, All Iron and Non-Ferrous Seal, Lead and Wire Spacer, Cam Spider Spring, Rotor Stem Assembly, Adjusting Ball, Steel Plate, Base Plate, Retainer Spring, Knob Stem, Adjusting Stud, Idler Tube, Oil Washer, Drive Washer, Idler Pinion Recommended Previous design block (stick style), Part No , has been replaced by design See Form No. PO01028 for component When ordering, include temperature range, API, or specific gravity, API Table used and meter Standard gearing called out. For special combinations, see Gear Train Bulletin Due to a Cam design change made in May 1993, any standard or All Iron meters manufactured after that time will require a cam and a spacer (Item #62, P/N: ). This part number ( ) is a kit which includes the cam and the spacer. Issue/Rev. 1.1 (9/11) P Page 5

6 Editorial Change: 11/13: Item 25 - material reference changed to PTFE. Headquarters: 500 North Sam Houston Parkway West, Suite 100, Houston, TX USA Phone: +1 (281) Fax: +1 (281) Operations: Measurement Products and Equipment: Ellerbek, Germany +49 (4101) 3040 Erie, PA USA +1 (814) Integrated Measurement Systems: Corpus Christi, TX USA +1 (361) Kongsberg, Norway +47 (32) The specifications contained herein are subject to change without notice and any user of said specifications should verify from the manufacturer that the specifications are currently in effect. Otherwise, the manufacturer assumes no responsibility for the use of specifications which may have been changed and are no longer in effect. Contact information is subject to change. For the most current contact information, visit our website at and click on the Contact Us link in the left-hand column. Printed in U.S.A. 9/11 FMC Technologies Measurement Solutions, Inc. All rights reserved. P Issue/Rev. 1.1 (9/11)