Capillaries & 1513N Series

Size: px

Start display at page:

Download "Capillaries & 1513N Series"

Wilfred Watts
6 years ago
Views:

1 1513 & 1513N Series he 1513 series is an excellent general purpose capillary suitable for a wide range of applications on a variety of metalizations. his series employs the double and 8 face angle architecture. he provides maximum downward force for a strong 1st bond with high ball-shear strength and is not prone to cut-stitch on the 2nd bond. he 8 face angle is the most versatile for handling a variety of stitch-bond metalizations. Many different ole and and size combinations are available in the different dash numbers of the 1513 series. (SANDARD) 1513 he 1513N may be specified for a inside chamfer for improved 2nd bond tailing and a more compact ball bond on materials with good bondability. For Angle, Specify 1513N Series Example: GM-20D Note: For ungsten Carbide material, specify 1113 & 1113N series (1/16 in. diameter only). For 1/8 in. diameter ceramic, specify 1213 & 1213N series. 8 DAS NO. * ± / 2.5 ( CONE) (20 CONE) / S / 170 SUGGESED WE DIAMEER to / 170 to / / M / A M S / A 5 / / M 5 / / / / / A 5 / M to to / / 262 to / / / / / 368 to / 406 * For hole sizes through , the tolerance is / For hole sizes greater than , the tolerance is / ighter tolerance available at additional charges. ** If < and/or <, the tolerance is +/ , otherwise tolerance is +/ (if >, tolerance is / ). 28

2 1572 & 1572N Series he 1572 series is an excellent general purpose capillary suitable for a wide range of applications on a variety of metalizations. his series employs the double and 8 face angle architecture. he provides maximum downward force for a strong 1st bond with high ball-shear strength and is not prone to cut-stitch on the 2nd bond. he 8 face angle is the most versatile for handling a variety of stitch-bond metalizations. Many different ole and and size combinations are available in the different dash numbers of the 1572 series. In general, the 1572 series will have smaller feature sizes for a given dash number. (SANDARD) 1572 capillaries he 1572N may be specified for a inside chamfer for improved 2nd bond tailing and a more compact ball bond on materials with good bondability. 8 For Angle, Specify 1572N Series wedges Specify: Series - Dash Number - Length + Finish - Options Example: GM Note: For ungsten Carbide material, specify 1172 & 1172N series (1/16 in. diameter only). For 1/8 in. diameter ceramic, specify 1272 & 1272N series. DAS NO. * ± / 2.5 ( CONE) (20 CONE) / S / 142 SUGGESED WE DIAMEER to / 142 to / / S / / S / / S / / / 23 2 to to to / to / / / 368 to / / / / / / / * For hole sizes through , the tolerance is / For hole sizes greater than , the tolerance is / ighter tolerance available at additional charges. ** If < and/or <, the tolerance is +/ , otherwise tolerance is +/ (if >, tolerance is / ). tab tools die attach other Coorsek, Inc. Gaiser Products Group 4544 McGrath Street Ventura, CA el Fax gaiser@coorstek.com 29

3 1570 & 1570N Series he 1570 series features a very large value outside radius () and double architecture. he oversize performs well with uneven metalizations or in applications where the 2nd bond or stitch-bond surface has problems with flatness or planarity. he allows for a taller, more compact ball bond. An optional may be specified for increased downward force on the ball bond. he 1570N may be specified for a inside chamfer for applications with poor 1st bond bondability. (SANDARD) 1570 For Angle, Specify 1570N Series Example: GM-20D Note: For ungsten Carbide material, specify 1170 & 1170N series (1/16 in. diameter only). For 1/8 in. diameter ceramic, specify 1270 & 1270N series. * *** SUGGESED ( CONE) (20 CONE) WE DIAMEER DAS NO. ± / / / to / to / to to / / 91 2 to / to / / / / / / / / / / / / / / / / / / 914 * For hole sizes through , the tolerance is / For hole sizes greater than , the tolerance is / ** If < and/or <, the tolerance is +/ , otherwise tolerance is +/ (if >, tolerance is / ). *** tolerance ± for less than or equal to ; for greater than, tolerance is ±10%. ighter tolerance available at additional charges. 30

4 1574 & 1574N Series he 1574 series utilizes a flat-face design combined with double architecture. his series can be configured for making relatively smaller ball bonds by specifying the dash numbers with the smaller sizes and adjusting the free-air ball accordingly. his series is designed for applications with good overall bondability, equivalent to the old series. he 1574N may be specified for a inside chamfer for surfaces with poor 1st bond bondability. (SANDARD) 1574 capillaries For Angle, Specify 1574N Series Example: GM-20D wedges Note: For ungsten Carbide material, specify 1174 & 1174N series (1/16 in. diameter only). For 1/8 in. diameter ceramic, specify 1274 & 1274N series. DAS NO. * ± / 2.5 *** ±0.0003/8 ( CONE) (20 CONE) SUGGESED WE DIAMEER / / / 174 to / / / 174 to / / / / 174 to S / / / S / 5 / / / M 5 / S / / / M 5 / / M / 9 to to / 211 to / S to / / / * For hole sizes through , the tolerance is / For hole sizes greater than , the tolerance is / ** If < and/or <, the tolerance is +/ , otherwise tolerance is +/ (if >, tolerance is / ). *** tolerance ± for less than or equal to ; for greater than, tolerance is ±10%. ighter tolerance available at additional charges. tab tools die attach other Coorsek, Inc. Gaiser Products Group 4544 McGrath Street Ventura, CA el Fax gaiser@coorstek.com 31

5 1548 & 1548N Series he 1548 series utilizes a flat-face design combined with double architecture. his series is the equivalent to the old series and is suitable for applications with good bondability. An optional may be specified for increased downward force on the ball bond. (SANDARD) he 1548N may be specified for a inside chamfer for applications with poor 1st bond bondability For Angle, Specify 1548N Series Example: P Note: For ungsten Carbide material, specify 1148 & 1148N series (1/16 in. diameter only). For 1/8 in. diameter ceramic, specify 1248 & 1248N series. DAS NO. * ± / 2.5 *** ( CONE) (20 CONE) SUGGESED WE DIAMEER to / / to / / 160 to / / / / / / / / / / 239 to to / / / / / / 442 to / / / 493 * For hole sizes through , the tolerance is / For hole sizes greater than , the tolerance is / ** If < and/or <, the tolerance is +/ , otherwise tolerance is +/ (if >, tolerance is / ). *** tolerance ± for less than or equal to ; for greater than, tolerance is ±10%. ighter tolerance available at additional charges. 32

6 1573 & 1573N Series he 1573 series is the original fine-pitch, small- capillary, designed before the 100µm barrier had been broken and before the angle bottleneck feature became commonplace for fine-pitch bonds. his series is typically equipped with a 15 or 20 cone and is designed for pitches above 100µm. he size is configured for making a small ball bond as well as having a radiused inside chamfer design for good looping characteristics in an automatic bonder. For bond pad pitches below 100um, refer to the fine pitch section of the catalog. (SANDARD) 1573 capillaries he 1573N may be specified for a radiused inside chamfer for a more compact ball bond on materials with good bondability. 8 For radiused inside chamfer, Specify 1573N Series wedges Example: GM-20D DAS NO. * ± / 2.5 *** Note: For ungsten Carbide material, specify 1173 & 1173N series (1/16 in. diameter only). For 1/8 in. diameter ceramic, specify 1273 & 1273N series. ( CONE) (20 CONE) SUGGESED WE DIAMEER / / to to / / to / / / / to / / / / 28 to / / / / 160 to tab tools die attach * For hole sizes through , the tolerance is / For hole sizes greater than , the tolerance is / ** If < and/or <, the tolerance is +/ , otherwise tolerance is +/ (if >, tolerance is / ). *** tolerance ± for less than or equal to ; for greater than, tolerance is ±10%. ighter tolerance available at additional charges. other Coorsek, Inc. Gaiser Products Group 4544 McGrath Street Ventura, CA el Fax gaiser@coorstek.com 33

7 Custom User-Specified Dimensions Series 1551, 1520, 1553, & 1554 Series he 1551 series allows the user to specify all dimensions of the capillary within the part number and should be used when an existing catalog series will not meet the requirements of an application. his series comes standard with a double inside chamfer, but may be specified with a or other chamfer angles. (SANDARD) 1551 For angle, specify x120d in part number. Other angle options also apply. For single angle, specify as 1553 series. Standard angle is unless otherwise specified. FACE ANGLE Example: GM-60(3x120D-8D-10) GM-80(3x70D-8D-15) GM-55(4x100D-4D-12) he 1520 series also allows the user to specify all dimensions of the capillary but is designed with a standard full radiused inside chamfer. his design is optimized for use in high-speed, automated bonders and provides improved looping and wire control. he 1520 series helps to reduce sagging and wavy-wire problems making the 1520 ideal for long-loop and low-loop bonding. (SANDARD) 1520 For smaller sizes, consider the 1553 and 1554 single series. Specify: Series - - Length+Finish - ( - Face Angle - )Options Example: GM-60(3-8D-10)20D GM-60(3-8D-10) GM-60(3-F-10)20D-A10x12-L FACE ANGLE Note: A flat face 1551 or 1520 may be specified by a -F or by the actual numerical value in the part number. A mathematical relationship exists between the various dimensions at the capillary tip. When designing a part number or when simply changing the cone angle, you may wish to contact a Gaiser Sales Engineer. If a radiused inside chamfer is desired in a 1551, specify -L at the end of the part number. If a radiused inside chamfer is desired in a 1551, use the 1520 series. For the 1553 series, a radiused inside chamfer is not available. 34

8 Custom User-Specified Dimensions Series 1551, 1520, 1553, & 1554 Series SERIES ARCIECURE ARCIECURE DEFINIIONS 1551 Double Architecture /50 Standard /80 and other angles optional 1551 Series utilizes the Gaiser Double architecture. /50 Double is standard unless otherwise specified. capillaries with L unless otherwise specified 1551 With L (lended Inside Chamfer) RADIUSED INSIDE CAMFER N/A (see 1520) L adds a Radiused/lended Inside Chamfer to Double and other 1551 capillaries. For L, use 1520 Series. wedges Double architecture with L 1520 Full Radius Series ( lended Inside Chamfer) N/A (see 1551 with L) RADIUSED INSIDE CAMFER 1520 Series utilizes the Gaiser Double architecture with Radiused/lended Inside Chamfer. For angle other than, use L. tab tools 1553 Single Architecture 1553 Series utilizes the basic Single angle design. Consider specifying when size is t oo small for Double. die attach 1554 Single Architecture with lend Edge LEND EDGE LEND EDGE 1554 Series is the same as the 1553 Single Series except that a very tiny edge break is applied to the transition from angle to the ole. other Coorsek, Inc. Gaiser Products Group 4544 McGrath Street Ventura, CA el Fax gaiser@coorstek.com 35

9 1590 & 1591 Series he 1590 and 1591 series are designed for pitches of 100µm and above. he angle bottleneck design provides clearance for adjacent loops and the is configured for making a small ball bond. he 1590 and 1591 series utilize full radius architecture for maximum downward force on the ball bond for the highest ball shear and for good looping. For a taller more compact ball bond, the 1592 & 1593 series utilize radiused inside chamfer architecture. oth 8 and 4 face angles are available R µm µm *Optional 20 Cone Available 10 Example: E-437GM-20D Note: A 10 by in. (305µm) high angle bottleneck is standard in the 1590/1591 series. Other angle bottleneck configurations may be specified at the end of the part number. 4 DAS NO. * ± / 2.5 ( CONE) (10 ANK) 159X-15C / X-15D / X-15E 2 159X-15F 159X-15G / X-17C X-17D X-17E 2 159X-17F 159X-17G / X / X-17J / X-18D / X-18E / X-18F / X-18G / X / X-18J / 216 SUGGESED WE DIAMEER to * For hole sizes through , the tolerance is / For hole sizes greater than , the tolerance is / ighter tolerance available at additional charges. ** If < and/or <, the tolerance is +/ , otherwise tolerance is +/ (if >, tolerance is / ). 36

10 1592 & 1593 Series he 1592 and 1593 series are designed for pitches of 90µm and above. he angle-bottleneck design provides clearance for adjacent loops and the is configured for making a small ball bond. he 1592 and 1593 series utilize radiused inside chamfer architecture for small ball bond size and improved looping. oth 8 and 4 face angles are available. For bond pad pitches less than 90µm, see the Process 1800 series capillaries 1593 R µm µm *Optional 20 Cone Available DAS NO. * ±0.0001/ ±0.0003/8 ( CONE) Example: E-437GM-20D Note: A 10 by in. (305µm) high angle bottleneck is standard in the 1592/1593 series. Other angle bottleneck configurations may be specified at the end of the part number. (10 ANK) 159X-15A / X / / / X-15C / X-15D / X-15E 2 159X-15F 159X-15G / X-17C X-17D X-17E 2 159X-17F 159X-17G / X / X-17J / X-18D / X-18E / X-18F / X-18G / X / X-18J / 216 SUGGESED WE DIAMEER 4 to * For hole sizes through , the tolerance is / For hole sizes greater than , the tolerance is / ighter tolerance available at additional charges. ** If < and/or <, the tolerance is +/ , otherwise tolerance is +/ (if >, tolerance is / ). other die attach tab tools wedges Coorsek, Inc. Gaiser Products Group 4544 McGrath Street Ventura, CA el Fax gaiser@coorstek.com 37

11 all umping Capillaries 1732 & 1733 Series he 1732 and 1733 series capillaries are designed for applications where only a ball bond is required. he user-friendly part number allows the hole and the dimensions to be specified for various wire diameters, bond pad sizes, and bond pad pitches. he dimension is automatically minimized for fine pitch applications unless otherwise specified. A flat and polished tool face is standard. oth the 1732 and 1733 are made of ceramic material unless otherwise specified as ungsten Carbide ( -WC in the part number). Note: For hole sizes through , the tolerance is / For hole sizes greater than , the tolerance is / ighter tolerance available at additional charges. * If < and/or <, the tolerance is +/ , otherwise tolerance is +/ (if >, tolerance is / ). ALL OND P CLEARANCE ALE MAXIMUM RECOMMENDED "" DIMENSION See Note* / / / / / / / / / / / / / / / / µm (REF) CALCULAED IN CLEARANCE ALE OND PAD P 38

12 all umping Capillaries 1732 & 1733 Series 1732 Series Features: he double inside chamfer forms a tall, compact ball bond on surfaces with good to fair bondability. Specify: Series ool Length - Options (SANDARD) 1732 capillaries Example: D-WC =90 Note: Optional dimension must be greater than 1.5 x dimension RADIUS EDGE (REF) * ** = 1.5 x wedges 1733 Series Features: (SANDARD) he double inside provides maximum downward force on the ball bond for use on surfaces with difficult bondability. he 1733 series tool will form a shorter, wider ball bond than the tab tools Specify: Series ool Length - Options Example: A10x12 Note: Optional dimension must be greater than 1.5 x dimension RADIUS EDGE (REF) * ** = 1.5 x die attach Dimensions are specified as follows: -XX = 0.00XX inch -18 = inch * For hole sizes through , the tolerance is / For hole sizes greater than , the tolerance is / ighter tolerance available at additional charges. ** If < and/or <, the tolerance is +/ , otherwise tolerance is +/ (if >, tolerance is / ). other Coorsek, Inc. Gaiser Products Group 4544 McGrath Street Ventura, CA el Fax gaiser@coorstek.com 39

13 Optional Radiused Inside Chamfers he standard and double inside chamfer capillaries are also available with an optional radiused inside chamfer at a moderate additional cost. he inside radius enhances wire control and looping characteristics. he inside radius also helps to alleviate sagging and wavy wires in long-loop, low-loop, high-speed-automated, and fine-pitch bonding applications. his is the same radiused inside chamfer design featured in the 1520 and 1590 finepitch series. SANDARD DOULE INSIDE CAMFER RADIUSED INSIDE CAMFER SANDARD SERIES INSIDE RADIUS () EQUIVALENS 1513N 1572N N 1522N SANDARD DOULE INSIDE CAMFER RADIUSED INSIDE CAMFER SANDARD SERIES INSIDE RADIUS () EQUIVALENS N 1570N N 1521N 40

TABLE 4 TABLE 5. Design Recommendations. for Conductive Elastomers. Fillers. Profiles

TABLE 4 TABLE 5. Design Recommendations. for Conductive Elastomers. Fillers. Profiles Design Recommendations for Conductive Elastomers Fillers Leader Tech Inc. is currently offering six different fillers that can be mixed with the polymers. These fillers are Pure Silver, Silver Plated Copper,