SBN Pendant Pushbutton Station. Technical Manual. Part Number: R2 January Magnetek Material Handling
|
|
- Chrystal Gaines
- 6 years ago
- Views:
Transcription
1 SBN Pendant Pushbutton Station Technical Manual Part Number: R Magnetek Material Handling
2 Table of Contents Service Contact Information... 3 Preface and Safety... 4 Product Safety Information... 4 Product Warranty Information... 4 DANGER, WARNING, CAUTION, and NOTE Statements... 5 Product Technical Specifications... 6 Features... 6 Pendant Electrical Rating... 6 Pendant Environmental Rating... 6 Durability... 6 Agency Approvals... 6 Cable Specifications for Pendant... 6 Wired Pendant Cable Specifications... 6 Standard Pendant Station Information... 7 Catalog Numbers... 7 Standard Configuration Labeling Enclosure Dimensions and Weights Pendant Cables Catalog Numbers Spare Parts and Accessories Catalog Numbers Enclosures and Top Matrix Label Sheets Actual Label Sheets Image Reference Numbers Switch Information Appendices Appendix 1: Switch Schematics Appendix 2: Switch Compatibility Matrix Appendix 3: Switch Travel and Forces Power Switches Motion Switches Appendix 4: Configured Pendant Sheet Page 2 of 23
3 Service Contact Information For questions regarding service or technical information contact: MAG-SERV ( ) Magnetek Material Handling N49 W13650 Campbell Drive Menomonee Falls, WI Telephone: Website: Fax Numbers: Main: Sales: Service: Magnetek, Inc. has additional satellite locations for Canada and the United States. For more information, please visit MAGNETEK All rights reserved. This notice applies to all copyrighted materials included with this product, including, but not limited to, this manual and software embodied within the product. This manual is intended for the sole use of the person(s) to whom it was provided, and any unauthorized distribution of the manual or dispersal of its contents is strictly forbidden. This manual may not be reproduced in whole or in part by any means whatsoever without the expressed written permission of MAGNETEK. Page 3 of 23
4 Preface and Safety 2016 MAGNETEK All rights reserved. This notice applies to all copyrighted materials included with this product, including, but not limited to, this manual. This manual is intended for the sole use of the persons to whom it was provided, and any unauthorized distribution of the manual or dispersal of its contents is strictly forbidden. This manual may not be reproduced in whole or in part by any means whatsoever without the expressed written permission of Magnetek. Product Safety Information Magnetek, Inc. (Magnetek) offers a broad range of radio remote control products, control products and adjustable frequency drives, industrial braking systems, and power delivery products for material handling applications. This manual has been prepared by Magnetek to provide information and recommendations for the installation, use, operation and service of Magnetek s material handling products and systems (Magnetek Products). Anyone who uses, operates, maintains, services, installs or owns Magnetek Products should know, understand and follow the instructions and safety recommendations in this manual for Magnetek Products. The recommendations in this manual do not take precedence over any of the following requirements relating to cranes, hoists, lifting devices or other equipment which use or include Magnetek Products: Instructions, manuals, and safety warnings of the manufacturers of the equipment where the Magnetek Products are used, Plant safety rules and procedures of the employers and the owners of the facilities where the Magnetek Products are being used, Regulations issued by the Occupational Health and Safety Administration (OSHA), Applicable local, state, provincial, or federal codes, ordinances, standards and requirements, or Safety standards and practices for the industries in which Magnetek Products are used. This manual does not include or address the specific instructions and safety warnings of these manufacturers or any of the other requirements listed above. It is the responsibility of the owners, users and operators of the Magnetek Products to know, understand and follow all of these requirements. It is the responsibility of the employer to make its employees aware of all of the above listed requirements and to make certain that all operators are properly trained. No one should use Magnetek Products prior to becoming familiar with and being trained in these requirements and the instructions and safety recommendations for this manual. Product Warranty Information Magnetek, hereafter referred to as Company, assumes no responsibility for improper programming of a device (such as a drive or radio) by untrained personnel. A device should only be programmed by a trained technician who has read and understands the contents of the relevant manual(s). Improper programming of a device can lead to unexpected, undesirable, or unsafe operation or performance of the device. This may result in damage to equipment or personal injury. Company shall not be liable for economic loss, property damage, or other consequential damages or physical injury sustained by the purchaser or by any third party as a result of such programming. Company neither assumes nor authorizes any other person to assume for Company any other liability in connection with the sale or use of this product. For information on Magnetek s product warranties by product type, please visit Page 4 of 23
5 DANGER, WARNING, CAUTION, and NOTE Statements Read and understand this manual before installing, operating, or servicing this product. Install the product according to this manual and local codes. The following conventions indicate safety messages in this manual. Failure to heed these messages could cause fatal injury or damage products and related equipment and systems. DANGER DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. This signal word is to be limited to the most extreme situations. WARNING WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION CAUTION indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury. It may also be used to alert against unsafe practices. NOTE: A NOTE statement is used to notify people of installation, operation, programming, or maintenance information that is important, but not hazard-related. Page 5 of 23
6 Product Technical Specifications Features Light weight and slim enclosures Variable composition stations Removable button caps and mark plates Pendant Electrical Rating General Use: Power rating: 3A, 250VAC, 50/60 Hz Heavy Duty: A300/AC-15 o Rating codes for a-c control-circuit contacts at 50/60 Hz: Make 60A, Break 6A at 120V Make 30A, Break 3A at 240V Pendant Environmental Rating Ambient Air Temperature: Min. of -5 C (no freezing); Max. of 40 C Durability Enclosure o Material: Polycarbonate o Color: Yellow (Munsell 2.5Y8/12) o UV rated outdoor application Agency Approvals UL508 CSA C22.2 No. 14 Cable Specifications for Pendant Applicable Wire: AWG ( mm 2 ) Wired Pendant Cable Specifications AWG 16, 65/34 bare copper PVC yellow insulation Diameter for strain relief: 1/16 diameter, 7x7 galvanized aircraft cable UL VW-1, 600V CSA FT-1, 600V Temperature: -40 C to 90 C Page 6 of 23
7 Standard Pendant Station Information Catalog Numbers 2-Button 2-Button - Momentary On/Off SBN-2-WB 2-Button - Maintained On/Off SBN-2-WH 2-Button - All Single-Speed SBN-2-WA 2-Button - All Two-Speed SBN-2-WS 2-Button - All Three-Speed SBN-2-WT 3-Button 3-Button - Single-Speed with Emergency Stop (Rotate to Release) SBN-3-WE 3-Button - Two-Speed with Emergency Stop (Rotate to Release) SBN-3-WES 3-Button - Three-Speed with Emergency Stop (Rotate to Release) SBN-3-WET 4-Button 4-Button - (2) Single-Speed with Momentary On/Off SBN-4-WB 4-Button - (2) Two-Speed with Momentary On/Off SBN-4-WBS 4-Button - (2) Three-Speed with Momentary On/Off SBN-4-WBT 4-Button - (2) Single-Speed with Maintained On/Off SBN-4-WH 4-Button - (2) Two-Speed with Maintained On/Off SBN-4-WHS 4-Button - (2) Three-Speed with Maintained On/Off SBN-4-WHT 4-Button - All Single-Speed SBN-4-WA 4-Button - All Two-Speed SBN-4-WS 4-Button - All Three-Speed SBN-4-WT 5-Button 5-Button - (2) Single-Speed with Emergency Stop (Rotate to Release) SBN-5-WE 5-Button - (2) Two-Speed with Emergency Stop (Rotate to Release) SBN-5-WES 5-Button - (2) Three-Speed with Emergency Stop (Rotate to Release) SBN-5-WET 6-Button 6-Button - (4) Single-Speed with Momentary On/Off SBN-6-WB 6-Button - (4) Two-Speed with Momentary On/Off SBN-6-WBS 6-Button - (4) Three-Speed with Momentary On/Off SBN-6-WBT 6-Button - (4) Single-Speed with Maintained On/Off SBN-6-WH 6-Button - (4) Two-Speed with Maintained On/Off SBN-6-WHS 6-Button - (4) Three-Speed with Maintained On/Off SBN-6-WHT 6-Button - All Single-Speed SBN-6-WA 6-Button - All Two-Speed SBN-6-WS 6-Button - All Three-Speed SBN-6-WT Page 7 of 23
8 7-Button 7-Button - (3) Single-Speed with Emergency Stop (Rotate to Release) SBN-7-WE 7-Button - (3) Two-Speed with Emergency Stop (Rotate to Release) SBN-7-WES 7-Button - (3) Three-Speed with Emergency Stop (Rotate to Release) SBN-7-WET 8-Button 8-Button - (6) Single-Speed with Momentary On/Off SBN-8-WB 8-Button - (6) Two-Speed with Momentary On/Off SBN-8-WBS 8-Button - (6) Three-Speed with Momentary On/Off SBI-8-WBT 8-Button - (6) Single-Speed with Maintained On/Off SBN-8-WH 8-Button - (6) Two-Speed with Maintained On/Off SBN-8-WHS 8-Button - (6) Three-Speed with Maintained On/Off SBI-8-WHT 8-Button - All Single-Speed SBN-8-WA 8-Button - All Two-Speed SBN-8-WS 8-Button - All Three-Speed SBI-8-WT 8-Button 8-Button Tandem - (6) Single-Speed with Momentary On/Off SBIT-8-WB Tandem 8-Button Tandem - (6) Two-Speed with Momentary On/Off SBIT-8-WBS 8-Button Tandem - (6) Three-Speed with Momentary On/Off SBIT-8-WBT 8-Button Tandem - (6) Single-Speed with Maintained On/Off SBIT-8-WH 8-Button Tandem - (6) Two-Speed with Maintained On/Off SBIT-8-WHS 8-Button Tandem - (6) Three-Speed with Maintained On/Off SBIT-8-WHT 8-Button Tandem - All Single-Speed SBIT-8-WA 8-Button Tandem - All Two-Speed SBIT-8-WS 8-Button Tandem - All Three-Speed SBIT-8-WT 10-Button 10-Button - (8) Single-Speed with Momentary On/Off SBN-10-WB 10-Button - (8) Two-Speed with Momentary On/Off SBN-10-WBS 10-Button - (8) Three-Speed with Momentary On/Off SBN-10-WBT 10-Button - (8) Single-Speed with Maintained On/Off SBN-10-WH 10-Button - (8) Two-Speed with Maintained On/Off SBN-10-WHS 10-Button - (8) Three-Speed with Maintained On/Off SBN-10-WHT 10-Button - All Single-Speed SBN-10-WA 10-Button - All Two-Speed SBN-10-WS 10-Button - All Three-Speed SBN-10-WT Page 8 of 23
9 12-Button 12-Button - (10) Single-Speed with Momentary On/Off SBN-12-WB 12-Button - (10) Two-Speed with Momentary On/Off SBN-12-WBS 12-Button - (10) Three-Speed with Momentary On/Off SBN-12-WBT 12-Button - (10) Single-Speed with Maintained On/Off SBN-12-WH 12-Button - (10) Two-Speed with Maintained On/Off SBN-12-WHS 12-Button - (10) Three-Speed with Maintained On/Off SBN-12-WHT 12-Button - All Single-Speed SBN-12-WA 12-Button - All Two-Speed SBN-12-WS 12-Button - All Three-Speed SBN-12-WT Page 9 of 23
10 Standard Configuration Labeling Page 10 of 23
11 Enclosure Dimensions and Weights Enclosure (Model) 2 Button (SBN-2-W) 3 Button (SBN-3-W) 4 Button (SBN-4-W) 5 Button (SBN-5-W) 6 Button (SBN-6-W) 7 Button (SBN-7-W) 8 Button (SBN-8-W) 10 Button (SBN-10-W) 12 Button (SBN-12-W) 8 Button Tandem (SBIT-8-W) Dimensions Weight H1 H2 W1 W2 D1 D2 0.7 lb. 0.8 lb. 1.0 lb. 1.1 lb. 1.4 lb. 1.5 lb. 1.6 lb. 2.0 lb. 2.4 lb. 1.6 lb mm (5.30") 167.5mm 90.5mm (6.59") (3.56") 198.5mm (7.81") 229.5mm (9.04") 100.5mm 285.5mm (3.96") (11.24") 315.5mm (12.42") 345.5mm 110.5mm (13.60") (4.35") 405.5mm (15.96") 470.5mm (18.52") 215.5mm (8.48 ) 120.5mm (4.74") 110.5mm (4.35 ) 69mm (2.72") 110.5mm (4.35") 76mm (2.99") 119mm (4.69 ) 77mm (3.03") 38mm (1.50") 51mm (2.01") 81mm (3.19") 51.5mm (2.03") 84mm (3.31") 131mm (5.16 ) 41mm (1.61 ) 55.5mm (2.19 ) Cable size diameter 8-17mm (0.315" ") 13-22mm (0.512" ") mm (0.591" ") mm (0.669" ") mm ( ) Page 11 of 23
12 Pendant Cables Catalog Numbers Description Catalog Number 16 Awg 8 Conductor with External Strain Relief R-16/8SR 16 Awg 12 Conductor with External Strain Relief R-16/12SR 16 Awg 16 Conductor with External Strain Relief R-16/16SR 16 Awg 24 Conductor with External Strain Relief R-16/24SR 16 Awg 8 Conductor without Strain Relief R-16/8 16 Awg 12 Conductor without Strain Relief R-16/12 16 Awg 16 Conductor without Strain Relief R-16/16 16 Awg 24 Conductor without Strain Relief R-16/24 Page 12 of 23
13 Spare Parts and Accessories Catalog Numbers Description Single-Speed 2-Button Switch (NO per button)* Single-Speed 2-Button Switch (2 NO per button)* Single-Speed 2-Button Switch (NO/NC per button)* Single-Speed 2-Button Switch (NO+NO/NC+NC per button)* Two-Speed 2-Button Switch* Three-Speed 2-Button Switch* Momentary On/Off 2-Button Switch* Maintained On/Off 2-Button Switch (NO)* Maintained On/Off 2-Button Switch (NO/NC)* Single-Speed 1-Button Switch (NO)* Single-Speed 1-Button Switch (NO/NC)* Catalog Number SBU-A-B SBU-2A-B SBU-AB-B SBIU-2A2B-B SBU-S-B SBIU-T2-B SBU-B-B SBU-H2-B SBU-H3-B SBIU-A1-B SBIU-AB1-B 2-Position Key Switch* 4-Position Key Switch* 2-Position Selector Switch* 3-Position Selector Switch (NC in Center Position)* 3-Position Selector Switch (NO in Center Position)* Mushroom Head Emergency Stop Device (Rotate to Release)* Buzzer Switch (Mounts in Upper Left)* Red Pilot Light (Mounts in Upper Left)* Green Pilot Light (Mounts in Upper Left)* Yellow (Orange) Pilot Light (Mounts in Upper Left)* Transparent Pilot Light (Mounts in Upper Left)* SBIU-KS2-B SBIU-KS4-B SBIU-L2-B SBIU-L3-B SBIU-L3B-B SBIU-E-B SBU-BzS-B PLH-120R PLH-120G PLH-120Y PLH-120T Buzzer Switch (Mounts in Standard hole)* Red Pilot Light (Mounts in Standard hole)* Green Pilot Light (Mounts in Standard hole)* Yellow (Orange) Pilot Light (Mounts in Standard hole)* Transparent Pilot Light (Mounts in Standard hole)* SBU-BzSX-B PLX-120R PLX-120G PLX-120Y PLX-120T 2-Button Enclosure front & back with gasket and hardware 3-Button Enclosure front & back with gasket and hardware 4-Button Enclosure front & back with gasket and hardware 5-Button Enclosure front & back with gasket and hardware 6-Button Enclosure front & back with gasket and hardware *see Appendix 1: Switch Schematics for more information. SBN-AE2 SBN-AE3 SBN-AE4 SBN-AE5 SBN-AE6 Page 13 of 23
14 Description 7-Button Enclosure front & back with gasket and hardware 8-Button Enclosure front & back with gasket and hardware 8-Button Tandem Enclosure front & back with gasket and hardware 10-Button Enclosure front & back with gasket and hardware 12-Button Enclosure front & back with gasket and hardware Catalog Number SBN-AE7 SBN-AE8 SBIT-AE8 SBN-AE10 SBN-AE12 Enclosure Top Assembly fits 2-6 Button pendants & mm Cables Enclosure Top Assembly fits 2-6 Button pendants & mm Cables Enclosure Top Assembly fits 7, 8, and 10 Button pendants & mm Cables Enclosure Top Assembly fits 12 Button pendants & mm Cables SBN-ATOPA SBN-ATOPB SBN-ATOPC SBN-ATOPD Cable Armor only, fits 2-6 Button pendants & mm Cables Cable Armor only, fits 2-6 Button pendants & mm Cables Cable Armor only, fits 7, 8, and 10 Button pendants & mm Cables Cable Armor only, fits 12 Button pendants & mm Cables SBN-PARMA SBN-PARMB SBN-PARMC SBN-PARMD Button Cap Assembly Red Button Cap Assembly Green Button Cap Assembly Black Clear Acrylic Marker Plate with Standard Legend Sheet** WC-RS WC-GS WC-BS LENS-CA Auxiliary Cable Armor 8-13mm Auxiliary Cable Armor 13-17mm Auxiliary Cable Armor mm HAI-7 HAI-12 HAI-16 Key Ring Dog Clip Thimble Pendant Warning Label *see Appendix 1: Switch Schematics for more information. **see Label Sheet Images for more information. Page 14 of 23
15 Enclosures and Top Matrix # of Holes Model Enclosure Catalog # 2 SBN-2-W #SBN-AE2 3 SBN-3-W #SBN-AE3 4 SBN-4-W #SBN-AE4 5 SBN-5-W #SBN-AE5 6 SBN-6-W #SBN-AE6 7 SBN-7-W #SBN-AE7 SBN-8-W #SBN-AE8 SBIT-8-W #SBIT-AE8 10 SBN-10-W #SBN-AE10 12 SBN-12-W #SBN-AE12 8 ENC TYPE STD TOP & AUX, SP #SBN-ATOPA #SBN-ATOPB STD w AUX TANDEM STD w AUX #SBN-ATOPC #SBN-ATOPD Label Sheets Actual Label Sheets Page 15 of 23
16 Image Reference Numbers Page 16 of 23
17 Switch Information SP/CAT# Rating Description Switch Button Mounting Mounting # of ref. Hood Screw Type Screw Qty Conductors #SBIU-E-B E-STOP, TURN TO RELEASE, N.O. & N.C. (1a+1b) E NO M4x #SBIU-A1-B MOMENTARY, 1 HOLE, N.O. (1a) A1 YES M4x #SBIU-AB1-B MOMENTARY, 1 HOLE, N.O. & N.C. (1a+1b) AB1 YES M4x #SBU-B-B MOMENTARY, 2 HOLE, N.O., N.C. (1a, 1b) B YES M4x #SBU-H2-B MAINTAINED, 2 HOLE, N.O., -- (1a, --) H2 YES M4x #SBU-H3-B MAINTAINED, 2 HOLE, N.O., N.C. (1a, 1b) H3 YES M4x #SBU-A-B 1 SPEED, 2 HOLE, N.O., N.O. (1a, 1a) A YES M4x #SBU-AB-B 1 SPEED, 2 HOLE, N.O. + N.C., N.O. + N.C. (1a+1b, 1a+1b) AB YES M4x #SBU-2A-B 1 SPEED, 2 HOLE, 2N.O., 2N.O. (2a, 2a) 2A YES M4x #SBIU-2A2B-B 3 Amps 250 VAC 1 SPEED, 2 HOLE, 2N.O.+2N.C., 2N.O.+2N.C. (2a+2b, 2a+2b) 2A2B YES M4x #SBU-S-B 2 SPEED, 2 HOLE, N.O.+N.O., N.O.+N.O. (1a+1a, 1a+1a) S YES M4x #SBIU-T2-B 3 SPEED, 2 HOLE, N.O. + N.O. + N.O., N.O. + N.O. + N.O. (1a+1a+1a, 1a+1a+1a) T YES M4x #SBIU-KS2-B SELECTOR, KEYED, 2 POSITIONS KS2 NO M4x #SBIU-KS4-B SELECTOR, KEYED, 4 POSITIONS KS4 NO M4x #SBIU-L2-B SELECTOR, 2 POSITIONS L2 NO M4x #SBIU-L3-B SELECTOR, 3 POSITIONS, N.C. ON CENTER L3 NO M4x #SBIU-L3B-B SELECTOR, 3 POSITIONS, N.O. ON CENTER L3B NO M4x #SBU-BzS-B AUX, MOMENTARY BUTTON BZS NO Nut M14XP #SBU-BzSX-B STD HOLE, MOMENTARY BUTTON BZX NO M4x #PLH-120R AUX, PILOT LIGHT (120V), RED RP NO Nut M14XP #PLH-120G AUX, PILOT LIGHT (120V), GREEN GP NO Nut M14XP #PLH-120Y AUX, PILOT LIGHT (120V), ORANGE YP NO Nut M14XP #PLH-120T AUX, PILOT LIGHT (120V), CLEAR TP NO Nut M14XP VAC #PLX-120R STD HOLE, PILOT LIGHT (120V), RED RPX NO M4x #PLX-120G STD HOLE, PILOT LIGHT (120V), GREEN GPX NO M4x #PLX-120Y STD HOLE, PILOT LIGHT (120V), ORANGE YPX NO M4x #PLX-120T STD HOLE, PILOT LIGHT (120V), CLEAR TPX NO M4x #WPI-Y STD HOLE, PLASTIC RIGID BLANK Y NO M4x N/A #WC-M STD HOLE, BLACK SILICONE RUBBER BLANK M NO M4x Page 17 of 23
18 Appendices Appendix 1: Switch Schematics Model: SBU-B-B Model: SBU-H2-B Model: SBU-H3-B Model: SBU-A-B Model: SBU-AB-B Model: SBU-2A-B Model: SBIU-2A2B-B Page 18 of 23
19 Model: SBU-S-B Model: SBIU-T2-B Model: SBIU-A1-B Model: SBIU-AB1-B Model: SBIU-KS2-B Model: SBIU-KS4-B Model: SBIU-L2-B Model: SBIU-L3-B Page 19 of 23
20 Model: SBIU-L3B-B Model: SBIU-E-B Model: SBU-BzS-B Model: PLH-120 Pilot Light with Blank Plug Models: WC-M and WPI-Y WC-M Blind Cover WPI-Y Blank Plug with O-Ring Seal Page 20 of 23
21 Appendix 2: Switch Compatibility Matrix Contact Configuration SBN SBP Momentary 1 N.O. 1 N.C. #SBU-B-B not mechanically intern locked 1 N.O. 1 N.C. #SBPU-B 1 N.O. - #SBU-H2-B Maintained on/off 1 N.O. - #SBPU-H2 1 N.O. 1 N.C. #SBU-H3-B 1 N.O. 1 N.C. #SBPU-H3 1 N.O. 1 N.O. #SBU-A-B 1 N.O. 1 N.O. #SBPU-A2 1 N.O. + 1 N.C. 1 N.O. + 1 N.C. #SBU-AB-B Momentary 1 N.O. + 1 N.C. 1 N.O. + 1 N.C. #SBPU-AB Single Speed 2 N.O. 2 N.O. #SBU-2A-B 2 N.O. 2 N.O. #SBPU-D2 2 N.O.+ 2 N.C. 2 N.O.+ 2 N.C. #SBIU-2A2B-B - Momentary Two Speed 1 N.O. (1 N.O.) 1 N.O. (1 N.O.) #SBU-S-B #SBPU-S Momentary Three Speed 1 N.O. (1 N.O.) [1 N.O.] 1 N.O. (1 N.O.) [1 N.O.] #SBIU-T2-B #SBPU-T E-Stop Rotate to Release 1 N.O. + 1 N.C. - #SBIU-E-B #SBPU-SMMH Key Switch 1 N.O. - #SBIU-KS2-B #SBPU-KS2 1 N.O. + 1 N.C. - #SBIU-KS4-B #SBPU-KS4 1 N.O. - #SBIU-L2-B #SBPU-L2 Selector Switch 1 N.O. + 1 N.O. - #SBIU-L3-B #SBPU-L3 1 N.O. + 1 N.O. - #SBIU-L3B-B #SBPU-L3B Momentary 1 N.O. - #SBIU-A1-B - Single hole 1 N.O. + 1 N.C. - #SBIU-AB1-B - Horn 1 N.O. - #SBU-BzS-B #SBPU-BZS 1 N.O. - #SBU-BzSX-B #SBPU-ABZS Pilot 120V - #PLH-120_ #SBPU-PL-_ Lights 120V - #PLX-120_ #SBPU-PLX-_ - - #WPI-Y #SBPU-BLNK Blank - - #WPI-X #WC-M - Lens - - #LENS-CA #LENS - - #LEGEND Legend - - #LGD-STD Sheet - - #LGD-SYBL Page 21 of 23
22 Appendix 3: Switch Travel and Forces Power Switches SBU-B-B SBU-H2-B SBU-H3-B SBIU-E-B Power Switches ON (ozf / in) ON (ozf / in) Operating Force Operating Distance Operating Force Operating Distance Operating Force Operating Distance Operating Force - 86 Operating Distance Total Travel (in) Motion Switches Motion Switches SPEED 1 (Break) (ozf / in) SPEED 1 (Make) (ozf / in) SPEED 2 (ozf / in) SPEED 3 (ozf / in) Total Travel (in) SBU-A-B SBU-2A-B SBU-AB-B SBIU-2A2B SBU-S-B SBIU-T2-B SBIU-A1 SBIU-AB1 Operating Force Operating Distance Operating Force Operating Distance Operating Force Operating Distance Operating Force Operating Distance Operating Force Operating Distance Operating Force Operating Distance Operating Force Operating Distance Operating Force Operating Distance Page 22 of 23
23 Appendix 4: Configured Pendant Sheet Page 23 of 23
WARNING Δ! WARNING PB-14 SUPERSEDES PB-10. Copyright 2014 by Duct-O-Wire Co PRINTED IN U.SA.
Δ! WARNING Δ! WARNING FOR STOP-SWITCH/EMERGENCY-STOP AND FAILSAFE CIRCUIT REQUIREMENTS, REFER TO OSHA 29 CFR, 1910.6 AND CMAA SPECIFICATIONS 70 AND 74. PB-14 SUPERSEDES PB-10 c Copyright 2014 by Duct-O-Wire
More informationCOOPER POWER SERIES. D-73P3 bypass switches installation instructions. Switches MN008005EN. Effective April 2016 Supersedes S June 2013
Switches MN008005EN Effective April 2016 Supersedes S328-120-1 June 2013 D-73P3 bypass switches installation instructions COOPER POWER SERIES DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY The information,
More informationActuating elements for ComEx
Description A large number of variants and versions of actuating elements are available for the ComEx control and indicator units. All actuating elements are made of high-quality thermoplastic and conform
More informationCOOPER POWER SERIES. Manual or Hostick Operable, Padlockable 150 A Tap-Changer Switch Installation Instructions. Tap-Changer Switch MN800015EN
Tap-Changer Switch MN800015EN Effective December 2017 Supersedes February 1987 (S800-58) COOPER POWER SERIES Manual or Hostick Operable, Padlockable 150 A Tap-Changer Switch Installation Instructions DISCLAIMER
More informationCOOPER POWER SERIES. UltraSIL Polymer-Housed Distribution-Class MOV Surge Arrester Installation Instructions. Surge Arresters MN235006EN
Surge Arresters MN235006EN Effective August 2016 Supersedes June 2014 (S235-35-1) COOPER POWER SERIES UltraSIL Polymer-Housed Distribution-Class MOV Surge Arrester Installation Instructions DISCLAIMER
More informationMODELS (2 foot Version) (4 foot Version)
INSTALLATION AND MAINTENANCE MANUAL DUROSITE LED LINEAR FIXTURE Document No: 9100-127-2571-99 Rev A April, 2016 MODELS (2 foot Version) (4 foot Version) ALL LAE ALL LBE These instructions contain important
More informationS Surge Arresters
Surge Arresters UltraSIL Polymer-Housed VariSTAR Type US, UH, and UX Station-Class Surge Arresters Installation and Maintenance Instructions Service Information S235-88-1 Contents Product Information...........................1
More informationOperation Manual Air Saver Unit ASV5000 Series
9IM-V066-b Operation Manual Air Saver Unit ASV5000 Series Thank you for your choice of Kuroda Pneumatics LTDs product on this time. Please read this operation manual carefully and use the product correctly.
More informationCOOPER POWER SERIES. 50 A 2:1 series multiple (dual voltage) switch cap/wrench, lever or hotstick operable handles installation instructions
Voltage Regulators MN800013EN Effective February 2016 Supersedes S800-70-1 August 2012 COOPER POWER SERIES 50 A 2:1 series multiple (dual voltage) switch cap/wrench, lever or hotstick operable handles
More informationCOOPER POWER SERIES. EL Bay-O-Net Current-Limiting Fuse Installation Instructions. Fusing Equipment MN132023EN
Fusing Equipment MN132023EN Effective November 2016 Supersedes June 2010 (S240-70-1) EL Bay-O-Net Current-Limiting Fuse Installation Instructions COOPER POWER SERIES DISCLAIMER OF WARRANTIES AND LIMITATION
More informationPushbuttons, Indicating Light, and Rotary Switch Stations Series 4975
Series 4975 Series 4975 Pushbutton Stations are designed for shipboard control applications requiring heavy duty watertight master switches. Stations are available with one, two or three elements equipped
More informationCOOPER POWER SERIES. 200 A 15/25 kv class deadbreak straight connector installation instructions. Deadbreak Apparatus Connectors MN650043EN
Deadbreak Apparatus Connectors MN650043EN Effective February 2017 Supersedes October 2004 (S550-12-1) 200 A 15/25 kv class deadbreak straight connector installation instructions COOPER POWER SERIES DISCLAIMER
More information2000 lb manual winch
2000 lb manual winch Model 41694 Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA 93011
More informationCOOPER POWER SERIES. 200 A 15, 25, and 35 kv class portable feedthru installation instructions. Loadbreak Apparatus Connectors MN650037EN
Loadbreak Apparatus Connectors MN650037EN Effective November 2016 Supersedes October 2013 (S500-14-1) 200 A 15, 25, and 35 kv class portable feedthru installation instructions COOPER POWER SERIES DISCLAIMER
More informationDT400/436 Tee Connector Installation Instructions
Connectors Lorem ipsum and dolor Splices sit Amat Effective September 2014 Supersedes IS550-30-1 March 2011 MN650001EN DT400/436 Tee Connector Installation Instructions DISCLAIMER OF WARRANTIES AND LIMITATION
More informationRIX COMPRESSORS. MICROBOOST Owner s Manual CONFIGURATION A MB-115 MB-230. November 21, 2002 APPLICABILITY [ A]
RIX COMPRESSORS MICROBOOST Owner s Manual CONFIGURATION A MB-115 MB-230 November 21, 2002 APPLICABILITY [ A] INTRODUCTION Safety This electromechanical equipment is designed to produce high pressure gas.
More informationF series Foot Switches
F series Foot Switches ITC presents a complete line of foot switches from Bernstein, designed to respond to the most stringent requirements for machine control and safety applications. The F series includes
More informationVL 2K LIFT D-L WINCH INSTRUCTIONS (Applies to P/Ns , , , , , )
VL 2K LIFT D-L WINCH INSTRUCTIONS (Applies to P/Ns 3714022, 3714028, 3714034, 3714040, 3714043, 3714046) REIMANN & GEORGER CORPORATION MARINE PRODUCTS BUFFALO, NY P/N 6112103 04/09/18 1 SAFETY 1.1 INTRODUCTION
More informationArbor Terminator Press Operation Manual For IDT Connectors Order No Engineering No: AM
Arbor Terminator Press Operation Manual For IDT Connectors Order No. 11-20-0815 Engineering No: AM7223-140 Description Operation Maintenance Order No: TM-011200815 Release Date: 03-08-12 UNCONTROLLED COPY
More informationCOOPER POWER SERIES. 200 A 15, 25, and 35 KV class insulated standoff bushing installation instructions. Loadbreak Apparatus Connectors MN650039EN
Loadbreak Apparatus Connectors MN650039EN Effective November 2016 Supersedes October 2013 (S500-22-1) COOPER POWER 200 A 15, 25, and 35 KV class insulated standoff bushing installation instructions SERIES
More informationSpectrum AquaLight (SAL ) Color Underwater Light Owner s Manual
Spectrum AquaLight (SAL ) Color Underwater Light Owner s Manual IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS Table of Contents Section I. Installing Light Fixture
More informationMODEL SWH10 1,000 LB CAPACITY SWIVEL HOIST
MODEL SWH10 1,000 LB CAPACITY SWIVEL HOIST PARTS BREAKDOWN AND OPERATING MANUAL Copyright 2007, Arcan Professional Tools Rev: 05/15/07 This operating manual contains important safety information. Read
More informationINSTRUCTION MANUAL Pressure Relief Device LPT
INSTRUCTION MANUAL Pressure Relief Device LPT 5COV475800 LPT REV00 CONTENT: 1 SAFETY 1.1 Safety instructions 2 1.2 Specified applications 2 1.3 Safety notes on the equipment operation 2 2 PRESSURE RELIEF
More informationData sheet Pressure switch type CS December 2001 DKACT.PD.P10.A B1119
Pressure switch type CS December 2001 DKACT.PD.P10.A2.02 520B1119 Introduction Pressure switch type CS is part of the Danfoss pressure control range. All CS pressure switches have a built-in pressure-operated,
More informationINSTALLATION AND OPERATING INSTRUCTIONS. T10219-AD Deckboat 40 with AutoDeploy and Wireless Remote Control
INSTALLATION AND OPERATING INSTRUCTIONS ANCHOR WINCH T10219-AD Deckboat 40 with AutoDeploy and Wireless Remote Control If you have any questions or difficulty installing this product, we are here to help!
More informationVACUUM REGULATORS CONTENTS
CAD drawing data catalog is available. ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS CONTENTS Small Regulators Features 759 Specifications, Order Codes, Flow Rate
More informationS Vacuum Switches. Contents. Type VCS-1 Single-Phase Vacuum Capacitor Switch Installation and Operation Instructions
Vacuum Switches Type VCS-1 Single-Phase Vacuum Capacitor Switch Installation and Operation Instructions Service Information S260-15-1 Figure 1 Type VCS-1 Vacuum Capacitor Switch 010065KM Contents Safety
More informationNorrsken Family Booklet
Section 1: Introduction Low Energy Designs produce efficient and effective LED based lighting products for commercial, retail and industry purposes. Each product may contain specific details on its operation
More information200 A, 15 and 25 kv class loadbreak bushing insert installation instructions
Loadbreak Apparatus Connectors Effective October 2013 Supersedes March 2011 200 A, 15 and 25 kv class loadbreak bushing insert installation instructions S500-12-1 DISCLAIMER OF WARRANTIES AND LIMITATION
More informationCOOPER POWER SERIES. UltraSIL polymer-housed VariSTAR surge arrester IEC for MV systems to 36 kv installation instructions
Surge Arresters MN235005EN Lorem ipsum dolor sit Amat Effective February 2016 Supersedes IS235-35-1 June 2014 COOPER POWER SERIES UltraSIL polymer-housed VariSTAR surge arrester IEC 60099-4 for MV systems
More informationOperating instructions Safety Rope Emergency Stop Switches ZB0052 / ZB0053 ZB0072 / ZB0073
Operating instructions Safety Rope Emergency Stop Switches UK ZB0052 / ZB0053 ZB0072 / ZB0073 7390878 / 02 03 / 2011 Contents 1 Safety instructions...3 2 Installation / set-up...4 2.1 Applications...4
More informationCOOPER POWER SERIES. 600 A 15, 25, and 35 kv class PUSH-OP bushing adapter cap installation instructions. Deadbreak Apparatus Connectors MN650050EN
Deadbreak Apparatus Connectors MN650050EN Effective May 2017 Supersedes January 2010 (S600-19-1) COOPER POWER 600 A 15, 25, and 35 kv class PUSH-OP bushing adapter cap installation instructions SERIES
More informationSPECIFICATIONS ATTENTION
VPS 504 S06 Installation Manual - P/N 80122 - Ed. 01/09 VPS 504 S06 and S05 Valve Proving System Installation Instructions VPS 1 6 Gases Natural gas, air and other inert gases. NOT suitable for butane
More informationService Instructions. Syntron Jogger Model: Mini-CheckMate TM
Service Instructions Syntron Jogger Model: Mini-CheckMate TM Service Manual Syntron Jogger Model: Mini-CheckMate TM 1 Table of Contents Page Safety Instructions 3 Introduction 4 Installation 4 Operation
More informationComEx Actuating elements
ComEx Actuating elements for Zone and 2 ComEx Actuating elements Features Easy installation Certified for Zone and 2 High IP degree of protection A large number of variants and versions of actuating elements
More informationT i m i n g S y s t e m s. RACEAMERICA, Inc. P.O. Box 3469 Santa Clara, CA (408)
RACEAMERICA T i m i n g S y s t e m s Demo Tree Controller Owner s Manual Models 3204D, 3204DW & 3204DX Rev D RACEAMERICA, Inc. P.O. Box 3469 Santa Clara, CA 95055-3469 (408) 988-6188 http://www.raceamerica.com
More informationLockout / Tag out Program
Lockout / Tag out Program Presented by DOSHTI www.doshti.com You will learn Purpose of Lockout- Tag out Requirements for LOTO Types of Hazardous Energy Procedures for LOTO The OSHA Standard for the Control
More informationFor Models: 55A00-2 (HAI UPB 1500W Wall Switch Dimmer) 55A00-3 (HAI UPB 2400W Wall Switch Dimmer) 37A00-1 (HAI Auxiliary Switch)
HAI UPB High Power Wall Switch Dimmer and HAI Auxiliary Switch Installation and Operating Instructions For Models: 55A00-2 (HAI UPB 1500W Wall Switch Dimmer) 55A00-3 (HAI UPB 2400W Wall Switch Dimmer)
More informationWelcome to the World of In-Home Gardening! Simple Steps to Get Your AeroGarden Up and Growing (No Tools Required)
Quick Setup Guide Welcome to the World of In-Home Gardening! Simple Steps to Get Your AeroGarden Up and Growing (No Tools Required) Harvest Model number: 100690-BLK / GRY / WHT / RED Harvest 360 Model
More informationOPERATION and MAINTENANCE Guide
Catalog No. AIR1000 Winch and Hoist OPERATION and MAINTENANCE Guide Cat. No. AIR1000 1250 Lb. Single Line Pull READ THIS BEFORE OPERATING UNIT INSTALLATION: Mount on clean, flat surface. Use 1/2" mounting
More informationSAFETY & OPERATING INSTRUCTIONS
SAFETY & OPERATING INSTRUCTIONS UV KNIFE SANITIZER, Model KSUV-18 READ AND UNDERSTAND THIS MANUAL AND ALL INSTRUCTIONS BEFORE OPERATING THIS SANITIZER. FOR MODEL UVKR-18 INCLUDED KNIFE RACK 159 Industrial
More informationVL PONTOON/TRITOON DECK BRACKET 13 INSTRUCTIONS
VL PONTOON/TRITOON DECK BRACKET 13 INSTRUCTIONS REIMANN & GEORGER CORPORATION MARINE PRODUCTS BUFFALO, NY P/N 6112--- 01/08/14 TABLE OF CONTENTS CHAPTER TITLE PAGE 1 SAFETY... 1 1.1 Introduction... 1 1.2
More informationCOMPACT METAL bender 99826
COMPACT METAL bender 99826 Set up And Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com
More informationCOOPER POWER SERIES. QD8 Quik-Drive tap-changer VR or VL reversing switch stationary contact assembly kit number A48 installation instructions
Voltage Regulators MN225037EN Effective June 2016 New Issue COOPER POWER SERIES QD8 Quik-Drive tap-changer VR or VL reversing switch stationary contact assembly kit number 5791646A48 installation instructions
More informationCOOPER POWER SERIES. 600 A 15, 25 and 35 kv class bushing adapter installation instructions. Deadbreak Apparatus Connectors MN650058EN
Deadbreak Apparatus Connectors MN650058EN Effective May 2017 Supersedes July 2009 (S600-59-1) 600 A 15, 25 and 35 kv class bushing adapter installation instructions COOPER POWER SERIES DISCLAIMER OF WARRANTIES
More information200 PSI COMPRESSORS - MODEL NUMBERS
200 PSI COMPRESSORS - MODEL NUMBERS 380C AIR COMPRESSOR KIT PART NO. 38033 480C AIR COMPRESSOR KIT PART NO. 48043 380C 480C IMPORTANT: It is essential that you and any other operator of this product read
More informationInstructions for High Altitude Conversion
6304 38 0/ US/CA For heating engineers Instructions for High Altitude Conversion Logano G334 X gas-fired boiler This conversion kit and the accompanying instructions are for conversion of G334 X gas-fired
More informationIndex Table. Model 794. Installation, Operating and Maintenance Instructions
CLOCKWISE MANUAL MAKING INTO CCW TABLE Index Table Model 794 Installation, Operating and Maintenance Instructions Black & Webster Products Division 545 Hupp Ave. P.O. Box 831, Jackson, Michigan 49204 2009
More informationModel PSI Compressor with 3-Gallon Air Tank 12VDC
Model 6350 150 PSI Compressor with 3-Gallon Air Tank 12VDC IMPORTANT: It is essential that you and any other operator of this product read and understandd the contents of this manual before installing
More information420C AIR COMPRESSOR KIT PART NO C AIR COMPRESSOR KIT PART NO
420C AIR COMPRESSOR KIT PART NO. 42042 460C AIR COMPRESSOR KIT PART NO. 46043 420C 460C IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this
More informationReferences 6 k thermal overload relays, adjustable from 0.11 to 16 A
s 6 k thermal overload relays, adjustable from 0.11 to 16 A 3-pole relays with screw clamp terminals These overload relays are designed for the protection of motors. They are compensated and phase failure
More informationConductor Bushings Series 8174
> Current lead-in for Ex d enclosures > 1 to 72 conductors combined in one current lead-in > Series screw-in plug-in > For voltages up to max. 1 V > For size conductor up to 7 mm 2 www.stahl.de 3163E The
More informationCOOPER POWER SERIES. Under-oil arrester disconnector installation/operation instructions. OEM Equipment MN800010EN
OEM Equipment MN800010EN Effective February 2016 Supersedes S800-51-1 August 2012 COOPER POWER SERIES Under-oil arrester disconnector installation/operation instructions DISCLAIMER OF WARRANTIES AND LIMITATION
More informationA17W23_MASE_MUS_EN MANUAL
A1W2_MASE_MUS_EN MANUAL CONTENTS 1 Identification 1.1 Manufacturer 1.2 Product name 1. Year of manufacture 1. Area of use 2 Technical specification 2.1 Design 2.2 Function 2. Technical data 2. Security
More informationPushbuttons and Indicating Lights
Pushbuttons and Indicating Lights Pushbuttons Indicating Lights Emergency Stops Selector Switches.5 Product Overview.............................................. 2 Product Selection Guide.........................................
More information12" 8A Electric Snow Shovel
12" 8A Electric Snow Shovel 2600802 Owner s Manual TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757) Read all safety rules and instructions carefully before operating this tool. CONTENTS Contents... 2...
More informationIMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS CAUTION - To reduce risk of electrical shock: - Do not disassemble. Do not attempt repairs or modifications. Refer to qualified service agencies for all service and repairs.
More informationPRODUCT SUPPORT MANUAL YACHT BEAM 6M Searchlight Remote Control System with Joystick Remote Control Panel
PRODUCT SUPPORT MANUAL YACHT BEAM 6M Searchlight Remote Control System with Joystick Remote Control Panel The Yacht Group - 4545 Ponce de Leon Blvd. Coral Gables FL 33146 Tel. 305.667.5811 - Fax. 305.663.5551
More informationSanitary RTD Temperature sensor TH17. Measuring System Sanitary RTD assembly with connection head TH17 for food and dairy applications.
Sanitary RTD Temperature sensor TH17 Compact Instructions Measuring System Sanitary RTD assembly with connection head TH17 for food and dairy applications. The single element RTD is specifi cally designed
More informationMODEL 9875 STADIUM BASEBALL SCOREBOARD. Instruction Manual
UNITEC MANUFACTURING DIVISION MODEL 9875 STADIUM BASEBALL SCOREBOARD (WITH INNING BY INNING SCORING) Instruction Manual Mailing Address: PO Box 260, Yorkville, NY 13495-0260 Plant Address: 34 Main Street,
More informationACCESSORY KIT INSTALLATION INSTRUCTIONS
ACCESSORY KIT INSTALLATION INSTRUCTIONS 1NP0680 - PROPANE CONVERSION FOR USE WITH MODELS: PM8, PC8, PM9, PC9, FL9M, FL9C, FC9M, FC9C This conversion kit is to be installed by a qualified service agency
More informationBudget Range Operators Handbook
Budget Range Operators Handbook BAMBI AIR COMPRESSORS LTD 152 Thimble Mill Lane Heartlands Birmingham B7 5HT United Kingdom Tel: 0121 322 2299 Fax: 0121 322 2297 Email: sales@bambi-air.co.uk www.bambi-air.co.uk
More informationFor ELECTRIC ANCHOR WINCH Models: T Pontoon 35 T sw Salt Water Series Coastal 35
INSTALLATION AND OPERATING INSTRUCTIONS ANCHOR WINCHES For ELECTRIC ANCHOR WINCH Models: T10109-35 Pontoon 35 T10102-35sw Salt Water Series Coastal 35 If you have any questions or difficulty installing
More informationFor use with select HPC Fire Pits ONLY- refer to product catalog or website. 100K BTU Maximum WARNING: FOR OUTDOOR USE ONLY
For use with select HPC Fire Pits ONLY- refer to product catalog or website. 100K BTU Maximum : FOR OUTDOOR USE ONLY Small Tank LP Kit (STLPK) Installation & Operation Instructions Installation We suggest
More informationFurther technical information is available on
1 of 5 Manufacture address : Bartec Technor AS Dusavikveien 39 4007 Stavanger Norway Further technical information is available on www.bartec-technor.no Note on instructions When working in hazardous areas,
More informationCOOPER POWER. SERIES VariSTAR type composite light-duty under-oil (CLU) MOV arrester installation instructions. Surge Arresters MN235023EN
Surge Arresters MN235023EN Effective November 2016 Supersedes October 2006 (S235-95-1) COOPER POWER SERIES VariSTAR type composite light-duty under-oil (CLU) MOV arrester installation instructions HIGH
More informationOEM Manual MODEL 2305 ECONOMICAL DIGITAL SINGLE CYLINDER SCALE
OEM Manual MODEL 2305 ECONOMICAL DIGITAL SINGLE CYLINDER SCALE 1 These instructions generally describe the installation, operation, and maintenance of subject equipment. The manufacturer reserves the right
More informationFor ANCHOR WINCH Model: T Big Water 45 T sw Salt Water Series Big Water 45
INSTALLATION AND OPERATING INSTRUCTIONS ANCHOR WINCHES For ANCHOR WINCH Model: T10110-45 Big Water 45 T10103-45sw Salt Water Series Big Water 45 If you have any questions or difficulty installing this
More information100C Air Compressor Kit
10010 100C Air Compressor (standard mounting bracket, CE Spec) 10014 100C Air Compressor (no leader hose or check valve, CE Spec) 10016 100C Air Compressor (with Omega Bracket, CE Spec) IMPORTANT: It is
More informationPressure Measurement Single-range transmitters for general applications
Siemens AG 07 Overview Function U const. p U I EM Sensor Connection for auxiliary power supply Vent pipe with humidity filter Protective conductor connection/ Equipotential bonding Diaphragm The pressure
More informationPropane Conversion Kit Instructions
604 8 0/ US/CA For heating engineers Propane Conversion Kit Instructions Logano G4 X gas-fired boiler This conversion kit and the accompanying instructions are for conversion of G4 X gas-fired boilers
More informationEffective March 2015 Supersedes S August 2002
Reclosers MN280009EN Effective March 2015 Supersedes S280-40-11 August 2002 COOPER POWER SERIES Type R, RE, W, WE reclosers closing solenoid contactor replacement kit KA852R installation instructions DISCLAIMER
More informationInstallation and Service Manual
An Actuant Company Installation and Service Manual Heavy Duty Hydraulic Stabilization Legs CONTENTS Part # 3010003129 REV 0D Section Page 1.0 Receiving Instructions 2 2.0 Safety Issues 2 3.0 Hydraulic
More informationHydraulic Punch Drivers
INSTRUCTION MANUAL 7804SB / 7806SB Quick Draw 7704SB / 7706SB Quick Draw Flex 7904SB / 7906SB Quick Draw 90 Quick Draw Hydraulic Punch Drivers Serial Codes AHJ, YZ, and ZA Read and understand all of the
More informationCOOPER POWER SERIES. VariSTAR Storm Trapper high energy MOV arrester installation instructions. Surge Arresters MN235017EN
Surge Arresters MN235017EN Effective October 2016 Supersedes S235-16-1 November 2009 COOPER POWER VariSTAR Storm Trapper high energy MOV arrester installation instructions SERIES DISCLAIMER OF WARRANTIES
More informationHand lever valves VHER
Hand lever valves VHER Hand lever valves VHER Key features Powerful Flexible Practical -M- Flow 170 3800 l/min 4/3-way valve mid-position closed mid-position exhausted mid-position pressurised Connections:
More informationNOTE: Parts are no longer available for this tool. The manual will continue on the next page.
NOTE: Parts are no longer available for this tool. The manual will continue on the next page. Form Z455 Date 12-97/D Page 1 of 6 INSTRUCTIONS & PARTS LIST FOR SIOUX 8200 POLISHER GENERAL SAFTEY RULES READ
More informationSIDE 16 Sidemount System User Manual
SIDE 16 Sidemount System User Manual Version 1.1, April 15, 2014 Disclaimer This document is proprietary to Scubatech Sp. z o. o. ("Scubatech") and no ownership rights are hereby transferred. No part of
More informationDK ton, Double-acting, Die-type Crimping Tool
INSTRUCTION MANUAL DK6040 60-ton, Double-acting, Die-type Crimping Tool Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register
More informationVS18/26 with PROFINET and EtherNet/IP Interface. ATEX Installation Instructions
VS18/26 with PROFINET and EtherNet/IP Interface ATEX Installation Instructions INDEX 1. INTENDED USAGE 3 2. OPERATING MANUAL ATEX 4 2.1 General conditions 4 2.2 Installation 5 2.3 Operating 5 2.4 Failures
More informationRTD Temperature sensor TH11
RTD Temperature sensor TH11 Compact Instructions Measuring System General purpose RTD with connection head TH11 for process and laboratory applications. The single element RTD is specifi cally designed
More informationInstruction Manual LIMITED 1 YEAR WARRANTY. Hydraulic Punch Driver Read this material before using this product.
Instruction Manual Hydraulic Punch Driver 902-483 LIMITED 1 YEAR WARRANTY We make every effort to assure that its products meet high quality and durability standards, and warrant to the original purchaser
More information1 Overview. Pressure Measurement Single-range transmitters for general applications. 1/22 Siemens FI
Siemens AG 06 SITRANS LH00 Transmitter for hydrostatic level Overview Function U const. p U I EM The pressure transmitter SITRANS LH00 is a submersible sensor for hydrostatic level measurement. The pressure
More informationSKP Series SKP25 U.. Pressure Regulating Gas Valve Actuator with Safety Shut-off Function
SKP Series SKP25 U.. Pressure Regulating Gas Valve Actuator with Safety Shut-off Function Technical Instructions Document No. 155-752 SKP25 U.. Description Only when assembled to Series VG Gas valves SKP25
More informationPushbuttons and Pilot Lights
Pushbuttons and Pilot Lights Pushbuttons and Pilot Lights - CSW Series (Ø 22mm) Nº Description 1 Double Pushbutton 2 Protection Cover for Double Pushbutton 3 Flush lluminated Pushbutton 4 Flush Pushbutton
More informationFENCER Under Cabinet LED Light Fixture
1.877.817.6028 www.diodeled.com FENCER Under Cabinet LED Light SABER Traditional design FOIL Modern slim design The FENCER fixture represents a new generation of under cabinet lighting for kitchens and
More information1 Overview. Pressure Measurement Single-range transmitters for general applications. 1/22 Siemens FI US Edition
Siemens AG 07 SITRANS LH00 Transmitter for hydrostatic level Overview Function U const. p U I EM The pressure transmitter SITRANS LH00 is a submersible sensor for hydrostatic level measurement. The pressure
More informationAIR/OVER HYDRAULIC JACK 20 TON
AIR/OVER HYDRAULIC JACK 0 TON 4487 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 999 by Harbor Freight Tools.
More informationdeluxe toilet safety support
deluxe toilet safety support Model 97388 Cleaning, Assembly, And Operation Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ
More informationYoke Block Instruction Manual
Yoke Block Instruction Manual ! WARNING IMPORTANT: READ MANUAL COMPLETELY BEFORE OPERATING THIS DEVICE This manual contains instructions on periodically required checks to be performed by the user. These
More information1.3 LIMITATIONS: The following application limitations must be recognized and considered before using this product:
3965 Pepin Avenue Red Wing, MN 55066-1837 Toll Free: (800) 328-6146 Phone: (651) 388-8282 Fax: (651) 388-5065 www.protecta.com User Instruction Manual AJ720A Concrete Anchor This manual is intended to
More informationWATER HEATER THERMAL EXPANSION TANKS Owner s Manual. Safety Instructions Installation Maintenance Warranty. Models: 2-5 Gallon Capacity
WATER HEATER THERMAL EXPANSION TANKS Owner s Manual Safety Instructions Installation Maintenance Warranty Models: 2-5 Gallon Capacity Thank You for purchasing this Thermal Expansion Tank. Properly installed
More informationLDO II AQ 2/2014, Edition 1.5
9623800 LDO II AQ 2/2014, Edition 1.5 USER MANUAL Table of Contents Specifications on page 2 General information on page 3 Product overview on page 4 Installation on page 5 Operation on page 7 Maintenance
More informationDual Solenoid Gas Valve Installation
Installation IMPORTANT: These instructions are intended as a guide for qualified personnel installing or servicing FLYNN Gas Products. Carefully follow all instructions in this bulletin and all instructions
More informationHeavy-Duty Hot Knife
Heavy-Duty Hot Knife Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More information3M Telecommunications Solutions for Networks. Quante QSA (= LSA plus) System Catalogue. Innovation
3M Telecommunications Solutions for Networks Quante QSA (= LSA plus) System Catalogue Innovation IDC Modules Overview 3M Quante Cross Connect System QSA QSA Series 1 Connection modules for screw fixing
More informationT EK-SUB 4800C 19 mm Submersible Level Transmitter
Technology Solutions T EK-SUB 4800C 19 mm Submersible Level Transmitter Instruction Manual Document Number: IM-4800C www.tek-trol.com Table of Contents 1 Safety Instructions... 2 1.1 Intended Use... 2
More informationSunbrite LTC Large Underwater Pool Lights
Sunbrite LTC Large Underwater Pool Lights O W N E R S M A N U A L 3050 0997 ASB INSTALLATION, OPERATION & PARTS This manual should be furnished to the end user of this light; its use will reduce service
More informationPosition switches FP series
A Position switches FP series Selection diagram 0 08 8 9 0 0 0 Ø 8 mm Ø, mm external rubber stainless steel stainless steel fiber glass rod gasket sphere sphere adjustable lever safety adjustable lever
More informationCOOPER POWER SERIES. DE250 deadbreak elbow connector installation instructions interface A. Screened Separable Connectors MN650025EN
Screened Separable Connectors MN650025EN Effective November 2016 Supersedes September 2013 (IS550-10-1) DE250 deadbreak elbow connector installation instructions interface A COOPER POWER SERIES DISCLAIMER
More information