Meter, PD Series H8-S1, S3, S5, S6, & S7 Parts List

Transcription

1 Meter, PD Series H8-S1, S3, S5, S6, & S7 Parts List Issue/Rev. 0.0 (1/14) Bulletin PO01010 S1 S3, S5, S6, S7 The Most Trusted Name In Measurement

2 Inner Mechanism Page 2 PO01010 Issue/Rev. 0.0 (1/14)

3 Item Description Qty. H8-S1 H8-S3, S5 H8-S6, S7 1 Adapter Adapter, Calibrator Adjusting Stem Blank Calibrator: Dummy Standard Temperature Corrected, Standard Temperature Corrected, Special Temp. or API xxx xxx xxx 5 Cap: Standard NACE Clamp, Oil Tube Coupling, Drive Coupling, Drive: S S Coupling, Input Coupling, Jackshaft Cover Assembly, Outer: S7 Only All Others, Standard NACE Bushing Pin, Groove, 3/16 x 3/8" Shaft, Calibrator Drive Gear Shaft, Idler Pinion Gear Cover, Knob Eyebolt Flange, Packing Gland Flange, Temperature Well Plug (Previous Design) Gasket, Temperature Well (Previous Design) Gasket, Cover Plate Gasket, Packing Gland Gear, Calibrator Drive: U.S. Barrels, Standard and All Iron U.S. Barrels, LPG Hectolitres, Standard and All Iron Hectolitres, LPG Bushing: Standard and All Iron LPG Pin Gear, Intermediate Pinion: U.S. Barrels, Standard and All Iron U.S. Barrels, LPG Hectolitres, Standard and All Iron Hectolitres, LPG Bushing, LPG Only Pin Gear, Jackshaft Pinion: Standard and All Iron (All) LPG (All) Bushing, LPG Only * Pin @3 Gland, Packing: Buna-N Viton PTFE Polytetrafluoroethylene (PTFE). Issue/Rev. 0.0 (1/14) PO01010 Page 3

4 Item Description Qty. H8-S1 H8-S3, S5 H8-S6, S7 NACE Housing, Gear: Standard and All Iron LPG Bushing: Standard and All Iron LPG Dowel Housing, Outer: S1, S3, S6 (Standard) S5, S7 (Standard) S1, S3 NACE Lubrication Assembly Fitting, Grease Nipple Nut: S1, S S3, S S O-Ring, Cover: Buna-N, S7 Only Buna-N, All Others Viton, S7 Only Viton, All Others PTFE O-Ring, Packing Gland: Buna-N Viton Oiler Pin, Cotter Pin, Counter Drive Coupling, 1/16" x 5/8" Pin, Groove, 1/16 x 1/2" Pin, Groove, 5/64 x 5/8" Pin, Groove, 3/16 x 3/8" Pin, Input, Coupling Pin, Outer Cover: S7 Only All Others Plate, Caution Plate, Cover Plate, Thrust Bearing (See Item #90 for LPG Trim) Plug, Pipe: 1/8" NPT, Standard /8" NPT, NACE /4" NPT, Standard Plug, Pipe: 3/4" NPT, Standard /4" NPT, NACE " NPT, Standard Plug, Pipe, 1/2" NPT: Standard NACE Plug, Temperature Well (Previous Design) Retainer, Ball (Not Used With LPG Trim) Ring, Snap Screw, Adapter, #6-32 x 5/16" Screw, Adapter to Cover, Drilled Polytetrafluoroethylene (PTFE). Page 4 PO01010 Issue/Rev. 0.0 (1/14)

5 Item Description Qty. H8-S1 H8-S3, S5 H8-S6, S7 62 Screw, Base Plate, #10-32 x 7/8" Screw, Cap; Body to Housing: S1, S3, S5 Standard, 3/4-10 x 2" S1, S3, S5 NACE S6, S7 Standard, 3/4-10 x 2-1/2" Screw, Cap; Cover to Housing: S6 Only, 1-8 x 6" S1, S3, S5, 3/4-10 x 3" Screw, Cover Plate, #10-32 x 3/8" Screw, Drive, Caution Plate Screw, Gear Housing, 5/16-18 x 5/8" Screw, Knob Cover, #10-24 x 3/4", Drilled Screw, Packing Gland: S1, #10-32 x 1/2" S3, S5, 5/16-18 x 1-1/4" S6, S7, 7/16-14 x 1-1/2" * Screw, Set, #10-32 x 1/4" Screw, Temperature Well Seal, Lead and Wire Shaft, Calibrator Drive Gear Shaft, Jack-Upper Shaft, Link Assembly Pin, Groove, 1/8 x 1" Stem Assembly, Adjusting Ball Plate, Base Plate, Retainer Spring, Knob Stem, Adjusting Stud, S7 Only, 1-1/4-8 x 9-1/2" Stud, Gear Shaft Tube, Oil Washer Washer Washer, Pinion Shaft Washer, Jackshaft Washer, Thrust - Jackshaft, LPG Only Inner Mechanism Item Description Qty. Part Number 91 Block: Standard Hi-Viscosity - For 2,000 SSU to 10,000 SSU Body Coupling, Drive Cover, Inner: Standard and All Iron LPG Bushing, Jackshaft: Standard and All Iron LPG Dowel, Locating Arm Lug, Lift Nut, Stem, 7/16" Nut, Inner Cover Pin, Groove, 1/4 x 1" Pin, Roll, Stem, 5/32 x 1" Issue/Rev. 0.0 (1/14) PO01010 Page 5

6 Item Description Qty. Part Number 102 Pin, Roll, Drive Coupling, 5/64 x 5/8" Pitot Plate, Shaft Cover Ring, Retaining Rotor and Blade Assembly: Standard All Iron LPG Arm, Locating Bar, Adjusting Bearing, Lower Rotor: Standard and All Iron LPG Bearing, Upper Rotor: Standard and All Iron LPG Bearing, Thrust: Standard and All Iron LPG Blade, Lower: Standard All Iron LPG Std. - Modified for 2,000 SSU to 10,000 SSU Std. - Modified for 200 F Max Std. - Modified for 2,000 SSU to 10,000 SSU and 200 F Max A.I. - Modified for 2,000 SSU to 10,000 SSU Bearing, Blade: Standard and All Current Design Previous Design Current Design Previous Design Bushing (Previous Design Bearing Only) Pin, Cotter, 3/32 x 1" Shaft, Bearing Spacer (Current Design Bearing Only) Blade, Upper: Standard All Iron LPG Std. - Modified for 2,000 SSU to 10,000 SSU Std. - Modified for 200 F Max Std. - Modified for 2,000 SSU to 10,000 SSU and 200 F Max A.I. - Modified for 2,000 SSU to 10,000 SSU Bearing, Blade: Standard and All Current Design Previous Design Current Design Previous Design Bushing (Previous Design Bearing Only) Pin, Cotter, 3/32 x 1" Shaft, Bearing Spacer (Current Design Bearing Only) Clamp, Rotor Cover Roller Page 6 PO01010 Issue/Rev. 0.0 (1/14)

7 Item Description Description Qty. H8-S1 H8-S3, Qty. S5 Part Number H8-S6, S7 125 Collar, Adjusting Pin, Adjusting Collar Key, Locating Arm Pin, Rotor Cover Roller Plate, Rotor Bearing Plate, Rotor Gear Roller Rotor: Standard Hi-Viscosity - For 2,000 SSU to 10,000 SSU * Dowel Screw, Cap, 5/16-18 x 1-1/2": Standard and LPG All Iron Sleeve, Rotor Screw, Locating Arm, 5/16-24 x 1-1/4" Screw, Rotor Gear Plate, 5/16-18 x 1" Shaft and Cam Assembly Cam Key, Cam and Shaft Shaft Screw, Cap-Block, 1/2-13 x 1-1/2" Screw, Cap-Inner Cover, 5/16-18 x 2" Screw, Inner Cover, 1/4-20 x 1/2" Screw, Inner Cover to Body, 3/8-16 x 1-1/4" Screw, Lower Bearing Plate, 5/16-18 x 3/4" Screw, Nylock, 1/2-13 x 1-1/2" Screw, Pitot, #10-32 x 1/4" Shaft, Jack and Gear Stem, Rotor Adjusting Washer Washer Washer, Shakeproof * Not illustrated. + Recommended stock. R Inner Mechanism General Assemblies Standard All Iron LPG Indicates change since last Note 1: When ordering, include temperature range, specific API Gravity, and API table Note 2: Only standard gearing is listed. For additional gearing combinations, see Gear Train Bulletin Note 3: See Form No. PO01042 for Note 4: Use of current design bearing eliminates the need to use bushing (Item 114 and 120) which was required with the previous design bearing; however, it requires the use of a spacer (Item 117 and 123) on the side of and between the Note 5: Item 146 screw and Item 151 washer were incorporated into the meter in These items are not included in meters manufactured prior to Issue/Rev. 0.0 (1/14) PO01010 Page 7

8 Revisions included in PO01010 Issue/Rev. 0.0 (1/14): Replaced publication number P which has been OBSOLETE. Transition from P to PO01010 is a total revision. Items 32 and 41 - material reference changed to PTFE. Headquarters: 500 North Sam Houston Parkway West, Suite 100, Houston, TX USA Phone: +1 (281) Fax: +1 (281) Operations: Measurement Products and Equipment: Ellerbek, Germany +49 (4101) 3040 Erie, PA USA +1 (814) Integrated Measurement Systems: Corpus Christi, TX USA +1 (361) Kongsberg, Norway +47 (32) The specifications contained herein are subject to change without notice and any user of said specifications should verify from the manufacturer that the specifications are currently in effect. Otherwise, the manufacturer assumes no responsibility for the use of specifications which may have been changed and are no longer in effect. Contact information is subject to change. For the most current contact information, visit our website at and click on the Contact Us link in the left-hand column. Printed in U.S.A. 1/14 FMC Technologies Measurement Solutions, Inc. All rights reserved. PO01010 Issue/Rev. 0.0 (1/14)