B104ZN BLTD 4H 90 L Bracket. Features. Material, Color, and Finish. Dimensions and Weight. Long Description
|
|
|
- Lizbeth Riley
- 6 years ago
- Views:
Transcription
1 B104 BLTD 4H 90 L Bracket Cooper B-Line/Cable Tray Catalog Number Manufacturer Description Weight per unit Product Category Features Material Material, Color, and Finish Finish Dimensions and Weight Size Descriptions Description Long Description Product Type B104 Cooper B-Line/Cable Tray Four Hole, Zinc Plated (lbs/each) Channel & Hot Rolled, Pickled and Oiled Plate or Strip Steel ZINC PLATED 3-1/2 In Width X 4-1/8 In Height Manufacturer Information Brand BOLTED FRAMING GTIN Manufacturers Part Number B104 sub brand Bolted Framing UPC BLTD 4H 90 L BRACKET FOUR HOLE CORNER ANGLE, ZINC PLATED Four Hole, Zinc Plated Taxonomies, Classifications, and Categories Category Description MISC FITTINGS Type Four Hole, 90 Deg Packaging Carton 1 Package 25 Weight Per each 0.73 Uses, Certifications, and Standards Application STRUT FITTINGS,BF-FTGS,ANGULAR
2 90 Angle Fittings B One Hole Wt./C 60 Lbs. (27.2 kg) B One Hole Wt./C 85 Lbs. (38.5 kg) B One Hole Wt./C 107 Lbs. (48.5 kg) 3 7 /8 (98.4) 5 7 /8 (149.2) 7 7 /8 (200.0) B One Hole Wt./C 129 Lbs. (58.5 kg) B101 Two Hole, HDG, SS4, AL Wt./C 37 Lbs. (16.8 kg) B230 Two Hole, HDG, SS4, AL Wt./C 37 Lbs. (16.8 kg) 9 7 /8 (250.8) 2 5 /16 (58.7) B231 Two Hole No-Twist, HDG Wt./C 41 Lbs. (18.6 kg) B359 Two Hole Wt./C 48 Lbs. (21.8 kg) B360 Two Hole Wt./C 53 Lbs. (24.0 kg) 2 1 / 3 (76.2) 2 1 / Pre-assembled fitting 4Dimension compatible fitting 77
3 B361 Two Hole Wt./C 60 Lbs. (27.2 kg) B102 Three Hole, HDG, SS4 B103 Three Hole, HDG, SS4 90 Angle Fittings 2 1 / B232 Three Hole, HDG, SS4 B374 Three Hole, HDG B529 Three Hole Wt./C 78 Lbs. (35.4 kg) 1 5 /16 (33.3) 3 (76.2) 4 7 /8 (123.7) 1 5 /16 (33.3) 2 1 /2 (63.5) B104 Four Hole, HDG, SS4, SS6, AL Wt./C 78 Lbs. (35.4 kg) B115 Four Hole, HDG, SS4, AL Wt./C 76 Lbs. (34.5 kg) B558 Four Hole Wt./C 73 Lbs. (33.1 kg) 2 1 / 3 1 / (82.8) Pre-assembled fitting 4Dimension compatible fitting 78
4 90 Angle Fittings B235R Three Hole (Right Hand) Offset from center to center of the holes that are shown with bolt heads Wt./C 53 Lbs. (24.0 kg) B235L Three Hole (Left Hand) Offset from center to center of the holes that are shown with bolt heads Wt./C 53 Lbs. (24.0 kg) B236R Three Hole (Right Hand) Offset Wt./C 65 Lbs. (29.5 kg) 3 1 / (82.8) 3 1 / (82.8) B236L Three Hole (Left Hand) Offset Wt./C 65 Lbs. (29.5 kg) B237 Three Hole Offset Bent Tee Wt./C 71 Lbs. (32.2 kg) B357 Four Hole Offset Bent Tee Wt./C 77 Lbs. (34.9 kg) 4 7 /8 (123.7) 2 (50.8) B238R Four Hole (Right Hand) Offset Bent Tee Wt./C 76 Lbs. (34.5 kg) B238L Four Hole (Left Hand) Offset Bent Tee Wt./C 76 Lbs. (34.5 kg) B239 Five Hole Offset Bent Tee Wt./C 96 Lbs. (43.5 kg) 79
5 B844 Universal Shelf Bracket, HDG, SS4 Wt./C 132 Lbs. (59.9 kg) B844W Universal Shelf Bracket - Welded Wt./C 134 Lbs. (60.8 kg) 90 Angle Fittings B888W Universal Shelf Bracket - Welded Wt./C 197 Lbs. (89.4 kg) 5 13 /16 (147.6) Welded Corner B234R Four Hole (Right Hand), HDG B234L Four Hole (Left Hand), HDG B134R Four Hole (Right Hand) B134L Four Hole (Left Hand) B125 Three Hole Gussetted Shelf Angle Wt./C 67 Lbs. (30.4 kg) B118 Four Hole Gussetted Shelf Angle, HDG Wt./C 102 Lbs. (46.2 kg) 2 5 /16 (58.7) 4Dimension compatible fitting 80
6 90 Angle Fittings B485 Four Hole Gussetted Shelf Angle Wt./C 148 Lbs. (67.1 kg) B533 Five Hole Gussetted Shelf Angle Wt./C 141 Lbs. (63.9 kg) B126 Four Hole Gussetted Three Way Shelf Angle Wt./C 101 Lbs. (45.8 kg) /8 1 /2 2 1 / B127 Five Hole Gussetted Three Way Shelf Angle Wt./C 135 Lbs. (61.2 kg) B503R Six Hole (Right Hand) Gussetted Corner Connection Wt./C 229 Lbs. (103.9 kg) B503L Six Hole (Left Hand) Gussetted Corner Connection Wt./C 229 Lbs. (103.9 kg) B663 Seven Hole Gussetted Corner Connection Wt./C 289 Lbs. (131.1 kg) B371 Wt./C 41 Lbs. (18.6 kg) 2 5 /8 (66.7) 2 (50.8) B372 Wt./C 38 Lbs. (17.2 kg) 9 /16 (14.3) 9 /16 (14.3) 2 5 /8 (66.7) 4Dimension compatible fitting 81
7 B496 Wt./C 85 Lbs. (38.5 kg) B496-1, HDG Wt./C 58 Lbs. (26.3 kg) 90 Angle Fittings B371-2 Three Hole Adjustable Wt./C 61 Lbs. (27.6 kg) 6 7 /8 (174.6) 2 3 /8 (60.3) 4 7 /8 (123.7) 2 3 /8 (60.3) 1 5 /16 (33.3) 2 5 /8 (66.7) B104SH Three Hole Adjustable Wt./C 68 Lbs. (30.8 kg) B461 Wt./C 87 Lbs. (39.4 kg) 3 7 /8 (98.4) B112 Four Hole Adjustable Wt./C 180 Lbs. (81.6 kg) 13 /32 (10.3) 1 /2 (12.7) 2 1 / (2) 6 5 /8 (168.3) B113 Four Hole Adjustable Wt./C 256 Lbs. (116.1 kg) B109S Two Hole Tapped Wt./C 33 Lbs. (14.9 kg) B521 Two Hole Bus Duct Angle Wt./C 37 Lbs. (16.8 kg) 6 (152.4) 8 5 /8 (219.1) 5 /16-18 Tapped 1 /2 (12.7) 2 (50.8) 4Dimension compatible fitting 82
Mini Channel & Fittings
Our mini channels and fittings provide for an economical method of supporting light load requirements on a strut system. Channel Channels are cold formed on our modern rolling mills from 18 Ga. (1.2 mm)
BKC100 SPRG Clamp For Wire Rope. Dimensions and Weight. Long Description. Manufacturer Information. Taxonomies, Classifications, and Categories
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 BKC100 SPRG Clamp For Wire Rope Cooper B-Line/Cable Tray Manufacturer Description Weight per unit Product Category Dimensions
Uses, Certifications, and Standards FASTENERS,KWIK WIRE,Lighting, Ductwork, Cable Tray
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 BKP10094 SPRG Wire Rope/CLMP Kit Cooper B-Line/Cable Tray Manufacturer Description Weight per unit Product Category Features
CHANNEL & SUPPORT SYSTEMS
Total Cable Management Solutions CHANNEL & SUPPORT SYSTEMS Unitrunk Intelok Channel is a strong, easy to erect support system, ideal for supporting cable trays, cable ladders, pipes and ducting and is
General Information Gravity roller conveyors are available in many sizes and configurations as shown on the following pages. There are many factors to consider when selecting a gravity conveyor. The following
Foundation Products. Poured In Ground Anchor Bolts E1 - E4. Structural Foundations E5 - E12. Copyright 2016 s Industry Inc. SIE-RA-CMP EN
Foundation Products Poured In Ground Anchor Bolts E1 - E4 Structural Foundations E5 - E12 EA EB Poured in Ground Anchor Bolts Layout SIEMENS Anchor Bolts 131702-4X shown for reference purposes only! Actual
Sub-Base Assembly For Type-ML 32 & VR-1 Step Voltage Regulator Single-Phase Liquid-Filled Part # GEK 35171
Transformer Business Department Regulator & Inductive Products Sub-Base Assembly For Type-ML 32 & VR-1 Step Voltage Regulator Single-Phase Liquid-Filled Part # GEK 35171 Last Update 11-19-2013 Tom Dauzat,
5. STRUCTURAL ANALYSIS
5. STRUCTURAL ANALYSIS The skeletal structure of the experiment casing is constructed from UNISTRUT with all experiment equipment mounted by UNISTRUT provided fasteners. All maximum loads for nuts, bolts,
& WIZARD ACCESSORIES
& WIZARD ACCESSORIES 1 Strut Channels 2 Hardware 3 Fittings & Accessories 4 Clamps 5 Inserts & End Caps 6 Slotted Angle & Pipe Supports 7 Engineering Data G-Strut Metal Framing Division 4100 13th Street
SPIRAL PIPE - OVAL SINGLE WALL
SPIRAL PIPE - OVAL SINGLE WALL Duct Direct Pipe and Fittings are manufactured in accordance with 2005 SMACNA Duct Construction Standards (1995 SMACNA Standards on request) OVAL SUBMITTAL Oval Single Wall
Descriptions INCLUDES (2) 1500WC WIRE CLIP; WITH 1/2 INCH, 3/4 INCH CONCENTRIC KNOCKOUT ON BASE
3804 South Street 75964-7263, TX acogdoches Phone: 936-569-7941 Fax: 936-560-4685 1542D STL Junction Box 1500 Wiremold/Legrand Catalog umber Manufacturer Description Weight per unit Product Category Features
Precision Duct Systems 4570 Commerce Cir SW Atlanta, GA Phone (404)
Project Name: Engineer: Contractor: Section Number: Date Submitted: Date Approved: Pressure Class: Material Type: Connections: 2005 Up to 10 wg 1995 2 wg pos 1995 4 wg pos 1995 10 wg 2005 neg WG: 1995
TECHNICAL HANDBOOK nvent CADDY Speed Link Manual. SLS Locking Device
TECHNICAL HANDBOOK nvent CADDY Speed Link Manual SLS Locking Device Contents 1. WIRE ROPE SUPPORT OVERVIEW 3 A. Using Wire Rope 3 B. The nvent CADDY Speed Link Manual 3 C. SLS Features 4 D. SLS Mechanism
SafidDampers. Class 1A & Class 1 Low Leakage Volume Control Damper ( Flange Type ) SPK Standard Construction. Description SPK
( Flange Type ) SPK 30 400 Standard Construction FRAME: 60mm x 30mm x.5mm (6 Ga.) galvanized steel formed channel for flange connection. BLADES: 00mm, 5mm and 50mm wide airfoil shaped blades extruded aluminum.
Taxonomies, Classifications, and Categories Wire/Plug Strips, Surf Raceways, Power Pole, Walkerduct, & Plugmolds ADAPTER FITTING
804 South Street 75964-726, TX acogdoches Phone: 96-569-7941 Fax: 96-560-4685 V1517B STL dpt'g 1500 vory Wiremold/Legrand Catalog umber Manufacturer Description Weight per unit Product Category Features
Table Bases. Stainless Steel, Aluminum and Cast Iron Designs
Table Bases Stainless Steel, Aluminum and Cast Iron Designs Features: Our Table Bases are available in Table and Bar heights and most can be cut to any custom height. These bases are strong and durable,
Cooper B-Line Replacements for Discontinued TOLCO Figure Numbers. Pipe Hangers/Pipe Supports...1. TOLCO Figure Numbers with Continued Availability...
Product Transition Guide March 2012 Table of Contents In October 2011, announced the acquisition of. The addition of s seismic bracing and fire protection solutions builds upon s broad solution portfolio
Parts & Installation Instructions SV & SV 2 8.5, 9.5 & 10.5 and SVLD 7.5 Snow Plow
Form -0 R September 0 Parts & Installation Instructions SV & SV.,. &. and SVLD. Snow Plow Item Part No. Part No. Part No. Part No. Part No. Part No. Qty. Description SVLD. SV. SV. SV. SV. SV. Moldboard
SLEEVED PLUG VALVES 2-WAY
Specialty Valves 2-WAY ANSI/ASME CLASS 150 LBS Dimensions to ANSI B16.5 & B16.10 1 Six (6) top holes * 2 1/2 valves are made from 3 casting, but flanges are machined to 2 1/2 dimensions 1/2 4.25 108.00
SLEEVED PLUG VALVES 2-WAY
Specialty Valves 2-WAY ANSI/ASME CLASS 150 LBS Dimensions to ANSI B16.5 & B16.10 1 Six (6) top holes * 2 1/2 valves are made from 3 casting, but flanges are machined to 2 1/2 dimensions 1/2 4.25 108.00
STOL CH rd Edition Drawings, dated April 16, 2012 Summary of changes from Edition 2 Revision 1 to Edition 3.
STOL CH 750 3 rd Edition Drawings, dated April 16, 2012 Summary of changes from Edition 2 Revision 1 to Edition 3. Page Date Drawing Title 75-G-0 04/12 Three View Drawing 1. Edition 3 75-G-1 04/12 Drawings
OCEAN - Wellness Line
147 Modern and functional: The range for shower and sauna doors. CONTENTS Technical details 1-151 Materials and surface finishes 152 Product information Shower hinges 153 Connectors and shower door knobs
CLEANROOM GEL GRID CEILING SYSTEM PRODUCT DATA Division
5023 HAZEL JONES ROAD, BOSSIER CITY, LA 71111 888.315.1561 800.877.8746 FAX SALES@GORDONCLEANROOM.COM GORDONCLEANROOM.COM AN EMPLOYEE OWNED COMPANY CLEANROOM GEL GRID CEILING SYSTEM PRODUCT DATA Division
Borais Petroleum Investment Co. SLOT RECOVERY SERVICE General Procedures
Borais Petroleum Investment Co. SLOT RECOVERY SERVICE General Procedures Slot Recovery Procedures: Slot Recovery Running Procedures 1. Cut And Retrieve Operation: Borais s cut and retrieve equipment: 1.
Steel Wire Cable Tray. Fabrication Guide
Steel Wire Cable Tray Fabrication Guide call +44 (0) 148 75 77 visit www.marcocm.com email marcosales@atkore.com Fabrication Guide Introduction Available in Electro-Zinc, Pre-Galvanised, Powder-Coated,
Model Copyright 2012 by General Machine Products (KT), LLC
LIGHTWEIGHT CAPSTAN WINCH OPERATION & MAINTENANCE MANUAL Model 70627 Copyright 2012 by All rights reserved. No part of this publication may be copied, reproduced or transmitted in any form whatsoever without
DICTATOR "DIREKT" Gate Closer
DICTATOR "DIREKT" Gate Closer For Access Gates in Boundary Fences The DICTATOR gate closer DIREKT is the economic solution for the controlled closing of outside gates, such as admission gates to kinder
24 HOUR CUSTOMER SERVICE
24 HOUR ER SERVICE (888) 464-4821 fax (410) 628-6557 sales@rollingdoorsinc.com WEATHER SEAL PRODUCTS Most of the items in this catalog ship in one day. (888) 464-4821 Fax (410) 628-6557 sales@rollingdoorsinc.com
Channel Bracket Support Cable Bracket Bearer Locking Pin Foundation Bolt Iron Anchor Step Manhole Sump Grill PVC/Steel Ladder Ladder Support & Hook
Manhole Accessories Channel Bracket Support Cable Bracket Bearer Locking Pin Foundation Bolt Iron Anchor Step Manhole Sump Grill PVC/Steel Ladder Ladder Support & Hook Manhole Guard Lifter Manhole Ventilator
- Written price quotations are valid for 30 days from the date of the quote unless otherwise noted.
SPECIFICATIONS - All material is solid brass with a #8 mirror finish unless otherwise noted. - All material sold by length is priced in one foot increments. ORDERING PROCEDURE - Use a Purchase Order number.
W A L D M A N U F A C T U R I N G C O M P A N Y, I N C.
A Axle & Nut Assemblies 22 Axle Sets 22 Axles 22 B Bars, Handle 12,13 Basket Fittings 10 Baskets 7,8,9,10 Bolts, Binder 15 Bolts, Expander 15 Bolts, Fork Crown 17 Bolts & Nuts, Assorted 21 Bolts & Nuts,
ALTERNATOR RACKS 135, 170 & 190 INSTRUCTIONS
Figure A Item # Description Quantity 1 Alternator Rack 1 1 3 4 11 5 10 8 2 Lower Mount Kit (see detail) 2 3 16mm M5 Swivel-Mount Bolt 2 4 M7 Washer 2 5 M6 Lock Nut 2 6 Lock Washer 2 7 Swivel Mount 2 8
Channel Nuts & Hardware
Channel Nuts Channel nuts are one of the main components of our strut system. It is designed to provide essential gripping power and ease during installation. Channel nuts are press formed, machined and
FULL HEX RIVET NUT INSERT
Fastening Systems Engineered For Performance FULL HEX RIVET NUT INSERT THE NEW STANDARD IN RIVET NUTS AS9100, ISO 9001:2008 AND ISO/TS 16949:2009 CERTIFIED FEATURES AND BENEFITS Proven to meet Class 8
INSTRUCTIONS 360 Y-DROP HAGIE STS 2015
INSTRUCTIONS 60 Y-DROP HAGIE STS 05 INSTRUCTIONS 60 Y-DROP HAGIE STS 05 INTRODUCTION Before beginning, it s important to know where each mounting bracket fits relative to the row spacing involved. The
steel wire cable tray system accessories
accessories Marco Cable Management has further enhanced its reputation, by the continued growth in innovative products and supportive accessories. Marco has also invested heavily in new state of the art
GUARD RAIL HEIGHT 42" STANDARD FIN. FLR. 12" MAX ANCHOR SPACING WILL DEPEND ON MOUNTING SUBSTRATE AND REGION OF PROJECT
FIN. FLR. STANDARD 8" TO 60" STD. PANEL WIDTH CRL SURFACE MOUNT TYPICAL GLASS RAILING ELEVATION VIEW - 8" TO 60" STD. PANEL WIDTH 1 MAX HORIZONTAL CAP RAIL TYPICAL BUTT JOINTS BETWEEN GLASS PANELS ANCHOR
Intermediate Angle, 0-25, Drilling detail. Angle 26-50, Baulk Plates, Pole Details. Termination Poles, ABC Details
Part 7 LVABC Overhead Drawing Register Number A1 A2 A3 A4 A5 A6 A8 A9 Description Intermediate Angle, 0-25, Drilling detail Angle 26-50, Baulk Plates, Pole Details Termination Poles, ABC Details Inline
DICTATOR "DIREKT" Gate Closer
DICTATOR "DIREKT" Gate Closer For Access Gates in Boundary Fences The DICTATOR gate closer DIREKT is the economic solution for the reliable and controlled closing of outside gates, such as admission gates
180 Series Rotary Shear Directional Control Valve
180 Series Rotary Shear Directional Control Valve Up to l 38 lpm, 10 US gpm l 700 bar, 10,000 psi Milwaukee, WI 53235, US el: +1 (414) 769-6400 sales-us@webtec.com St. Ives, Cambs. E27 3LZ, UK el: +44
TRAVSMART permanent single-cable horizontal lifeline system
The Travsmart single-line system provides a smooth travel. It allows the traveler to move freely over the intermediate anchors, minimizing wear and eliminating user assistance. The user s hands remain
Divider Systems. Rear Tire Divider (RTD) Section 4. Model Years Model Years Model Years
Divider Systems Rear Tire Divider (RTD) Section 4 Model Years 1988 1993... 2-3 Model Years 1994 1996... 4-5 Model Years 1997 2010... 6-7 Model Years 2011 Present, Upper... 8-9 Model Years 2011 Present,
Backboard and Rim Owners Manual
REQUIRED TOOLS AND MATERIALS: Two (2) Capable Adults Tape Measure Backboard and Rim Owners Manual Customer Service Center N53 W24700 South Corporate Circle Sussex, WI 53089 U.S.A. Step Ladder - 8ft. (2.4
D-Sub Vertical Surface Mount Connectors RoHS compliant Economical Interface Solution for SMT Applications
D-Sub Vertical Surface Mount Connectors RoHS compliant Economical Interface Solution for SMT Applications General In the manufacture of assemblies, the trend toward using SMT components is unbroken. Whereas
LANDING LEG HARDWARE Chassis & Trailers: Dry & Reefer Van / Flatbed / Auto.
Chassis & Trailers: Dry & Reefer Van / Flatbed / Auto 904.696.0010 www.buffersusa.com Sand Shoes (Low- & High-Profile) Low-Profile Sand Shoes Fab. Steel / Finish Buffers Part # Size Gusset Patch Sides
A photo gallery of jump construction can be found at;-
The Heirisson Island Tournament Water Ski Club jump is situated on the Swan River, in the heart of Perth. The jump was wholly constructed by volunteer members of the Heirisson Island Tournament Water Ski
Installation Instructions
116-3027, 116-3017 X-Pando Adjustable Steel Protector Installation Instructions 1404 N. Marshall Ave. El Cajon CA. 92020 For technical support call us at (800) 368-3075 NB 6/28/10 607-0112 Step 1. Mounting
NOAH RS. frame passport
frame passport Type: 7DB last update: 21/08/2015 INDEX 0. UPDATES... 3 1. GENERAL... 3 1.1. Description... 3 1.2. Part codes... 3 2. MATERIAL... 3 3. WEIGHT... 3 3.1. Frame... 3 3.2. Fork... 3 4. GEOMETRY...
Flex Series. Series Specifications & Description... Laminate Table Top & Base Chart... Product by Category. Sample Table Layouts... Bases...
Flex Series This is a metric series (imperial sizing available). Please refer to page INDEX-1 for details Series Specifications & Description... FLX-1 Laminate Table Top & Base Chart... Product by Category
EXPLORE FLIP AND NEST COLLABORATIVE TABLE
When a Learning Environments must be adaptable, the flip and nest table provides the solution. Use as a hard working multi-purpose work table then, as needs change, flip the table surface, nest the tables
Extension Platform. Base Platform. Crossover. Exit railing. Exit Railing
Base Platform Galvanized With metal grate and two brackets Railing on the long side and a face side Extension Platform Galvanized With metal grate and one bracket Railing on the long side with rail connection
Corrugated Hose Loop Calculations
Corrugated Hose Loop Calculations The loop installation is one of the most common application for metal hoses. It allows the flexible hose assembly to work properly. Care must always be exercised to ensure
YOUR TOOLS WILL DROOL.
2017 CATALOGUE Durable Finish All cabinets are powder coated with a gloss textured finish that resists fingerprints and scuffing. Strength Our cabinets are manufactured using 16 gauge high quality Canadian
Table of Contents. Benefits 3. Applications 4. Cable Locks 5-6. Cable & End Fixings Kits Accessories Internal Components 16
Table of Contents Benefits 3 Applications 4 Cable Locks 5-6 Cable & End Fixings 7-10 Kits 11-13 Accessories 14-15 Internal Components 16 Testing 16 Installation Instructions 17 Warnings 18 Effects of Hanging
JEEP CHEROKEE XJ DIY FRONT BUMPER ASSEMBLY INSTRUCTIONS
JEEP CHEROKEE XJ DIY FRONT BUMPER ASSEMBLY INSTRUCTIONS Please read the mounting instructions below carefully before attempting to install. Thank you for purchasing your new DIY Bumper from JcrOffroad!
230 kv Aluminum Welded Terminal Connectors
230 kv luminum 230 kv luminum Welded TYPE 15950, 15960 Flexible Rope Lay ssemblies luminum flexible rope lay assemblies are designed to connect to aluminum or copper pads. Pads conform to NEM standards.
SECTION 23iS/U: SIDE SKINS
SECTION 23iS/U: SIDE SKINS F-1203G-R BULKHEAD SIDE CHANNEL F-01248-R-1 ARM REST F-01205D SEAT BACK ADJUSTMENT GUIDE, 4 PLACES F-01205B-1 ROLL BAR ATTACH PLATE, F-01248B-1 FUSELAGE PIN LATCH, F-01204J BULKHEAD
RIGID FRAMES / 1-3/8 MEGA-TUBE
RIGID FRAMES / 1-3/8 MEGA-TUBE * Crafted from beefy 1-3/8 diameter DOM steel tubing, the rigid frames that follow represent KRAFT/TECH s commitment to mating sound engineering with design excellence and
HANGERS & SUPPORTS CLIP-IT CLIP-IT STUD STRAPS BAR JOIST CLIP CONDUIT HANGERS CLIP-IT
62 hangers & supports Innovation. It s what Madison is all about. Check out our Madison Strap, the product that started it all. Invented in 1929 by our founder Earl Adkinson, Madison has been on the cutting
Football Equipment. 5 9/16" Gooseneck Goalposts
5 9/16" Gooseneck Goalposts Football Equipment FB55CG 5 9/16" Gooseneck College Goalposts Applies also to FB55CG-SY and FB55CG-WT Goalposts shall meet all NCAA rules. Goalposts shall be of the single bent
#59114 Rola 2-Bike Rack Carrier (Shown Assembled) (A) (C) (B)
Use for Parts: #59114 Rola -Bike Rack System #59115 Rola 1-Bike Add-On TOOLS REQUIRED 10mm or 13/3 Socket & Wrench #59114 Rola -Bike Rack Carrier (Shown Assembled) Tray Attachment Hardware: (3) Plastic
Reservoir End Covers Type EC
Other Reservoir ccessories imensions / Technical ata / Order odes Reservoir End overs Type E H Ø2 Ø1 7 Gauge Steel haracteristics Materials End cover made of 7 Grade Steel (pickled and oiled); Stainless
X-night. frame passport UCI APPROVED TYPE: 7DE LAST UPDATE: 10/12/2015
X-night frame passport TYPE: 7DE LAST UPDATE: 0//05 UCI APPROVED INDEX 0. UPDATES...3. GENERAL...3.. PART CODES...3.. UCI...3. MATERIAL...3 3. WEIGHT...3 3.. FRAME...3 3.. FORK...3 4. GEOMETRY...4 5. CABLE
Refurbishing TR6 Window Slides. Chuck Hobbs 27 Feb 2017
Refurbishing TR6 Window Slides Chuck Hobbs 27 Feb 2017 Why Refurbish your Window Slides? Original slides are 40+ years old and are usually rusty, have no felt left on the runners and often the windows
Product Catalog and Pricing
2015 Prices effective December 1, 201 www.greenebinstairs.com Product Catalog and Pricing 177 Main Street; PO Box 191 All Galvanized Material East Lynn IL 60932 F.O.B. East Lynn IL 60932 217-375-2; FAX
MicroMetl ISOLATION CURB CATALOG. for York DH,DM,BP 180; BCH 180; DCG 180; DEE 180; DEG 180; DCE
MicroMetl ISOLATION CURB CATALOG for York DH,DM,BP 180; BCH 180; DCG 180; DEE 180; DEG 180; DCE Built-in seismic / earthquake restraints are pre-approved by State of California. for 0402-622A Isolation
TUBE SIGN POST PRODUCTS
Western Canada TUBE Products Ltd. SIGN POST PRODUCTS Company Profile With over 100 years of experience on staff and the largest inventory in Western Canada, we have the ability to meet all your sign support
REVIEW ALL INSTALLATION NOTES PRIOR TO INSTALLATION!
Page 1 of 7 HD NON-PENETRATING ROOF MOUNT ASSEMBLY INSTRUCTIONS REVIEW ALL INSTALLATION NOTES PRIOR TO INSTALLATION! INSTALLATION NOTES General 1) These general structural notes are intended to augment
INSTRUCTION MANUAL Pressure Relief Device LPT
INSTRUCTION MANUAL Pressure Relief Device LPT 5COV475800 LPT REV00 CONTENT: 1 SAFETY 1.1 Safety instructions 2 1.2 Specified applications 2 1.3 Safety notes on the equipment operation 2 2 PRESSURE RELIEF
O P E R ATING INSTRUCTIONS FOR MODEL SPR-45 Automatic Screen and Stencil Printer
O P E R ATING INSTRUCTIONS FOR MODEL SPR-45 Automatic Screen and Stencil Printer TABLE OF CONTENTS I. SPECIFICATIONS...3. II. SAFETY INSTRUCTIONS...4. III. INSTALLATION...5. IV. SET-UP...6. V. SYSTEM OPERATION...9.
Rhino-Rack Mountain Trail Bike Carrier (RBC035)
Important: Please read these instructions carefully prior to installation. Please refer to your fitting instruction to ensure that the bike rack is installed in the correct locations. Check the contents
TAZGO DIVISION. Available Services: Shearing, Plate Burning, Saw Cutting, Drilling
TAZGO DIVISION STEEL~STAINLESS~ALUMINUM Beams ~ Channel ~ Flat bar ~ HR Rounds ~ CR Rounds Angle ~ Square Tube ~ Rectangle Tube Pipe~ DOM~ Plate~ HR sheets ~ CR sheets~ Galvanized Sheets ~ Cross Members
Baying and lifting. Whitepaper
Baying and lifting Whitepaper Table of contents Introduction... 4 Enclosures baying... 6 Floor standing enclosures... 8 Side to side baying... 8 Internal baying brackets CCI06... 8 External baying brackets
Beauty-Line Windows (1957 to 1979)
Beauty-Line Windows (1957 to 1979) Parts Catalog Main Menu Section TOC Search What s in This Section Standard Windows................................................ Page 3 Parts Illustration...........................................................
OSKRG Research/Restoration Bulletin # K & XL Frame Model Year Determination Flow Chart
OSKRG Research/Restoration Bulletin #1 52-72 K & XL Frame Model Year Determination Flow Chart This research and restoration bulleting was created with input and assistance from members of the OSKRG. The
INDUSTRIAL SHOP SERIES
INDUSTRIAL SHOP SERIES The Shop Series offers all the components needed of an individual work area or a complete work station complex. Perfect for the garage or shop this series provides the standard &
DLE7.5CN V/50Hz 1~
dle75cn_102h4856_r290_2v_50hz_06-18_ds.xlsx Sales code: 102H4856 DLE7.5CN 2-240V/50Hz 1~ design Oil type Polyolester Refrigerant(s) R290 Oil viscosity 32cSt Displacement 7,48cm³ / 0,46cu.in Oil quantity
X-NIGHT DISC. frame passport
X-NIGHT DISC frame passport Type: 7DE last update: 7/06/017 INDEX 0. UPDATES... 3 1. GENERAL... 3 1.1. Part codes... 3 1.. Uci... 3. MATERIAL... 3 3. WEIGHT... 3 3.1. Frame... 3 3.. Fork... 3 4. GEOMETRY...
Stage Decks. Decks. Legs. Handrails. Trolleys. Stairs I Driveway. Tribunes. Accessories
Stage Decks Decks Legs Handrails Trolleys Stairs I Driveway Tribunes Accessories Decks 200x100cm Black Hexa anti-slip Plywood Stage of the art DECKS New deck 200x100cm is only 29 kg. Two longitudinal beams
WARNING Δ! WARNING PB-14 SUPERSEDES PB-10. Copyright 2014 by Duct-O-Wire Co PRINTED IN U.SA.
Δ! WARNING Δ! WARNING FOR STOP-SWITCH/EMERGENCY-STOP AND FAILSAFE CIRCUIT REQUIREMENTS, REFER TO OSHA 29 CFR, 1910.6 AND CMAA SPECIFICATIONS 70 AND 74. PB-14 SUPERSEDES PB-10 c Copyright 2014 by Duct-O-Wire
EPOXY FITTINGS DIMENSIONS
Bulletin No. A150 May 1, 2004 EPOXY FITTINGS DIMENSIONS 2"-16" GREEN THREAD fittings may be used with GREEN THREAD and RED THREAD II piping. Refer to Chemical Resistance Guide, Bulletin No. E5615, for
ECP Series Explosionproof Enclosures for OEM Applications. Optimized design, extensive sizes, and fast lead times.
ECP Series Explosionproof Enclosures for OEM Applications Optimized design, extensive sizes, and fast lead times. ECP Series Explosionproof Enclosures, the latest addition to our portfolio of electrical
Instructions MANUAL. Folding kayak NERIS-2 (tandem)
Instructions MANUAL Folding kayak NERIS-2 (tandem) 1. General descrition NERIS-2 is a touring folding kayak ideal for flat water trips on rivers, lakes and water reservoirs. It is also suitable for sea
3/8" Safety Cable Systems
3/8" Safety Cable Systems Ladder-Mount 3/8" Cable System (No Slider) Kits include appropriate length of aircraft cable, top and bottom support brackets, 12" tensioning turnbuckle, tension spring, and all
PARTS LIST. GF Sentry Series Infra-Red Salamander Broiler GFIR36C GFIR36 GFIR48 GFIR60. models. Parts & Service.
GF Sentry Series Infra-Red Salamander Broiler models GFIR36C GFIR36 GFIR8 GFIR60 PARTS LIST Parts & Service T (USA & Canada): 800 7 6668 F (USA & Canada): 800 36 775 www.garland-group.com Garland Commercial
INDEX. Specifications 1. Important Safety Precautions 2. Operating Instructions 3, 4. Optional Extras (Meal Tray & Footrest) 5.
INDEX Specifications 1 Important Safety Precautions 2 Operating Instructions 3, 4 Optional Extras (Meal Tray & Footrest) 5 Air System 6 Service & Maintenance 7 Warranty / Service Contract 8 SPECIFICATIONS
V-PLOW. ACCUFLO Conveyor Belt Cleaning System MAX SYSTEMS GUIDE. Engineering. LIB-CP-SYS-01-E Rev.9. Page 1
ACCUFLO Conveyor Belt Cleaning System Page 1 Conveyor Belt Cleaning System - System Nomenclature CATGORY MAINFRAM INFORMATION BLAD INFORMATION CP=CONVYOR PRODUCTS CP - PA - 36 M - G 83 SYSTM TYP BLT WIDTH
TRANSIT TOUGH BIKE RACKS
TRANSIT TOUGH BIKE RACKS WHY SPORTWORKS? Sportworks began designing and manufacturing the Bike-Rack-for-Buses over 23 years ago. Since then, we ve learned a lot about making these racks, safe, secure,
Landing Gear Accessories
RIGHT QUALITY RIGHT PRICE RIGHT AWAY Landing Gear Accessories www.goldlinequalityparts.com Edition 2016-02 powered by Introduction, Warranty and Contact Information... 1 Crank Handles 7/8" Dia. Shaft Crank
ASSEMBLY INSTRUCTIONES
ASSEMBLY INSTRUCTIONES www.quebecbillard.com PARTS IDENTIFIER 1 2 3 4 5 Side Apron-A Side Apron-B Playfield Center Support Left Leg 6 7 8 9 10 11 Right Leg End Apron Leg End Panel Leg Side Panel 12 13
steel wire cable tray system accessories
Marco Cable Management has further enhanced its reputation, by the continued growth in innovative products and supportive. Marco has also invested heavily in new state of the art equipment to enhance its
Horizontal Bladder Tanks
DATA SHEET Horizontal Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
RAI-M series RUDDER ANGLE INDICATOR SYSTEM
RUDDER ANGLE INDICATOR SYSTEM RAI-M series SEAFIRST ENGINEERING CO 45-16, Ga Um Dong, Chang Won, Kyong Nam Korea Tel : 82 55 267 1645 Fax ; 82 55 266 1646 http://www.seafirst.co.kr GENERAL Seafirst Rudder
RACKS SERIES. Racks revolutionized. BUILT TO CARRY QUICK RELEASE RACKS RACKS
220 BUILT TO CARRY Technologies & Features www.topeak.com Racks revolutionized. Our BeamRack series and Roadie Rack series are awesome ways to secure your carry-ons. And with our QuickTrack technology,
THOR 10 HAMMER CAGE INSTRUCTIONS
75 " 7m 78 4" m 6" 8.8m 45 ".70m 4.9deg 6 4" 6m 44 4".67m 75 " 7m 9 4" 0m 44".m 497 4".64m The 70, Thor Hammer Cage, consists of four heavy duty aluminum net poles. The unique pole structure reduces the
PULLTARP INSTALLATION & OPERATORS MANUAL
PULLTARP INSTALLATION & OPERATORS MANUAL Step 1. Mounting Positions Determine the mounting position for your truck Fig. 1 - Fig. 7. Fig. 1 Fig. 2 Fig. 3 A Mount Top Or Bottom Roll B Mount Top Or Bottom
Agilent 1220 Infinity II LC Mobile Upgrade Kit
Agilent 1220 Infinity II LC Mobile Upgrade Kit Note 1220 Infinity II LC Mobile Upgrade Kit This note describes the procedures to install an Mobile Upgrade kit to an existing Agilent 1220 Infinity II LC.
SERVCENTER, SERVCENTER II, SERVCENTER RACK
2005. All rights reserved. Black Box Corporation. Black Box Corporation 1000 Park Drive Lawrence, PA 15055-1018 Tech Support: 724-746-5500 www.blackbox.com e-mail: info@blackbox.com SERVCENTER, SERVCENTER
ROLLER SLIDE BALL BEARING
ROLLER SLIDE BALL BEARING ROLLER SLIDE SYSTEM BALL BEARING SLIDE SYSTEM Standard slides and ball bearing slides offering a variety of top quality movement systems. www.grassusa.com Roller slides: Tried-and-tested
Trench Cable Rollers - Straight Pulling Application
Trench Cable Rollers - Straight Pulling Application Straight Cable Roller Straight Cable Roller - Heavy Duty Two Casing Supports, Roller body made of Precision Steel Tube. German Bearings protected against