Meter, PD Series, E3 A1, S1 and E4 S1 Prior to 2005 Parts List

Size: px
Start display at page:

Download "Meter, PD Series, E3 A1, S1 and E4 S1 Prior to 2005 Parts List"

Transcription

1 Issue/Rev. 0.0 (2/13) Meter, PD Series, E3 A1, S1 and E4 S1 Prior to 2005 Parts List Bulletin PO Pre Pre Note: Angled housing not shown. The Most Trusted Name In Measurement

2 Item Description Qty. Pre Pre 1994 S1 All A S Page 2 PO01001 Issue/Rev. 0.0 (2/13)

3 Item Description Inner Mechanism All Models Qty. Pre Issue/Rev. 0.0 (2/13) PO01001 Page 3

4 Item Description Qty. Pre Adapter, Calibrator Adjusting Stem: Standard Without Adjusting Stem Hole Adapter Bearing, Thrust: Standard All Iron Bolt, Eye Calibrator: Standard W/ ATC (Standard) W/ ATC (Special Temp. or API) xxx xxx Dummy Calibrator Clamp, Oil Tube Coupling, Drive Cover, Assembly: E3 A1: Standard PTFE E3, E4 S1: Standard PTFE Bearing, Packing Gland Pin, Groove,.19 x Shaft, Gear Shaft, Idler Pinion Cover, Assembly, Packing Gland (S1 only) Cover, Knob Cup, Oil Disc, Coupling Flange, Packing Gland Flange, Temperature Well Plug Gasket, Cover Plate @5 Gasket, Packing Gland Gasket, Temperature Well Gear, Calibrator Drive: U.S. Gallons U.S. Gallons, LPG Imperial Gallons Dekalitres Dekalitres, LPG * Bushing: LPG Standard and All Iron Pin: LPG Standard and All Iron Gear, Jack Shaft Idler Assembly: U.S. Gallons, All Imperial Gallons, All Dekalitres, All Pin Gear, Shaft Pin Polytetrafluoroethylene (PTFE). Page 4 PO01001 Issue/Rev. 0.0 (2/13)

5 Item Description Qty. Pre Gland, Packing: A1 Buna-N A1 PTFE A1 Viton S1 Buna-N S1 PTFE S1 Viton Housing, Outer: E3-A E3-S E4-S Nut, 9/ Nut, Eyebolt, 1/2" O-Ring, Cover: Buna-N Viton O-Ring, Packing Gland: PTFE All others Pin, Cotter, 1/16 Dia x 1/2 Long, S.S Pin, Cotter, Jackshaft, 1/16 Dia x 5/8" Pin, Groove, Coupling Disc,.08 x.50": Pre Pin, Groove, Drive Coupling, 1/16 x 5/8" Pin, Groove, Outer Housing, 5/16 x 3/4" Plate, Caution, Calibrator Plate, Cover Plate, Thrust Bearing Plug, Pipe, 1/8 NPT 1010 Thru Plug, Pipe,.75 NPT Plug, Temp. Well (Slug) Plug, Temp. Well,.50 NPT Ring, Snap Screw, 5/16-18 x 1" * Screw, x 1/2" Screw, Adapter, 5/16-18 x 7/8" Screw, Adapter, 5/16-18 x 7/8" (Drilled, Security Function) Screw, Base Plate, x 7/8" Screw, Calibrator, 6-32 x 5/16" Screw, Caution Plate, 1/8" Self Tapping Screw, Cover: A1 9/16-12 x 1" S1 9/16-12 x 1-3/4" S1 3/4-10 x 1-3/4" Screw, Cover Plate, x 3/8" Screw, Housing to Inner Mechanism, 1/2-13 x 2.00" Screw, Knob Cover, x 3/4" Screw, Packing Gland: A1 #10-32 x 1/2" S1 #10-32 x 1/2" S x.62" @5 Shaft, Jack (Upper) Seal, Lead and Wire Shaft, Link Assembly Pin, Groove, 1/8 x 1" Polytetrafluoroethylene (PTFE). Issue/Rev. 0.0 (2/13) PO01001 Page 5

6 Item Description Qty. Pre Shaft, Link Shaft Assembly, Packing Gland (S1 only) Coupling, Drive Shaft Stem, Adjusting Ball, 1/8 Dia Plate, Base Plate, Retainer Spring, Knob Stem, Adjusting Tube, Oil Washer, Jack Shaft Washer, 7/32 ID x 3/4" OD (S1 only) Washer, Pinion Washer, Flat, 17/32 ID x 1-1/16" OD Inner Mechanism Item Description Qty. Part Number Block Body Coupling, Drive Cover, Inner: Standard and All Iron LPG Bushing, Jack Shaft: Standard and All Iron LPG Cover, Pitot Dowel, Locating Arm Gear, Jack Shaft Lug, Lift Nut, 5/ Nut, # Pin, Groove, 3/16" x 3/4" Pin, Groove, 1.08 x Pitot Assembly Plate Plug, Pipe, Hex Head,.50 NPT Ring, Retaining Rotor and Blade Assembly: Standard All Iron LPG Arm, Rotor Shaft Locating Bearing and Clamp: Standard and All Iron LPG Bearing, Rotor Thrust: Standard and All Iron LPG Blade, Lower: Standard All Iron LPG High Viscosity Page 6 PO01001 Issue/Rev. 0.0 (2/13)

7 Item Description Description Qty. Pre 1994 Qty. Part 1994 Number 2005 High Temperature High Viscosity/High Temperature Bearing, Blade: Standard and All Iron LPG Pin, Blade Bearing Pin, Cotter, 3/32 x 1" Blade, Upper: Standard All Iron LPG High Viscosity High Temperature High Viscosity/ High Temperature Bearing, Blade: Standard and All Iron LPG Pin, Blade Bearing Pin, Cotter, 3/32 x 1" Clamp, Roller Collar, Thrust Bearing Key Nut, 5/ Pin, Extension Pin, Roller Pin, Collar Thrust Bearing Plate, Rotor Gear Roller, Cover: LPG All others Rotor, Sub Assembly: Standard High Viscosity LPG Dowel, Rotor Screw, 1/4-20 x 7/8": All Iron (Drilled) All Others Screw, Adjusting Screw, 5/16-18 x 1-1/4" Screw, M-1/4-20 x 1-1/8" LG Shaft and Cam Assembly: Current Style Previous Style Cam: Current Style Previous Style Key, Woodruff Shaft Spacer, Rotor Bearing Spring, Rotor Screw, Pitot: #10-32 x 1-1/4" (Pre-1994) #10-32 x 1-3/8" ( ) Screw, 1/2-13 x 1" Hex HD Screw, 3/8-16 x 1-1/4" Hex HD Issue/Rev. 0.0 (2/13) PO01001 Page 7

8 Item Description Qty. Part Number 132 Screw, 5/16-18 x 1-3/4" Hex HD Screw, 5/16-18 x 1" Hex HD Washer, Flat,.75 OD,.265 ID,.010 Thick Washer, Flat, 11/16 OD 11/32 ID Washer, Lock Inner Mechanism General Assembly Numbers Standard All Iron LPG * Not illustrated. + Recommended stock. R Indicates change since last When ordering, include temperature range, specific or API gravity, API table used, and meter Only standard gearing is listed. For additional gearing combinations, see Gear Train Bulletin See Form No. PO01042 for component In 1976, a change in design was made to the block and cam of the 3" meter. To ensure proper operation, a current style block must be used with a current style cam. Either current or previous style block can be used with the previous style cam. The shaded area below represents the dimensions of the previous Excludes 1994 to 2005 S1. Revisions included in publication PO01001 rev 0.0 (2/13): PO01001 replaces publications P and P , both of which have been made obsolete. Total Revision. Editorial Change: 11/13: Items 8, 29, 34 - material reference changed to PTFE. Headquarters: 500 North Sam Houston Parkway West, Suite 100, Houston, TX USA Phone: +1 (281) Fax: +1 (281) Operations: Measurement Products and Equipment: Ellerbek, Germany +49 (4101) 3040 Erie, PA USA +1 (814) Integrated Measurement Systems: Corpus Christi, TX USA +1 (361) Kongsberg, Norway +47 (32) The specifications contained herein are subject to change without notice and any user of said specifications should verify from the manufacturer that the specifications are currently in effect. Otherwise, the manufacturer assumes no responsibility for the use of specifications which may have been changed and are no longer in effect. Contact information is subject to change. For the most current contact information, visit our website at and click on the Contact Us link in the left-hand column. Printed in U.S.A. 2/13 FMC Technologies Measurement Solutions, Inc. All rights reserved. PO01001 Issue/Rev. 0.0 (2/13)

Meter, PD Series, E3 S1 and E4 S to Present Parts List

Meter, PD Series, E3 S1 and E4 S to Present Parts List Issue/Rev. 0.0 (2/13) Meter, PD Series, E3 S1 and E4 S1 2005 to Present Parts List Bulletin PO01002 9 35 3 39 53 55 57 56 52 54 26 32 37 25 68 48 38 The Most Trusted Name In Measurement 5 31 7 44 42 16

More information

Meter, PD Series, E3 S6, S7 All Parts List

Meter, PD Series, E3 S6, S7 All Parts List Issue/Rev. 0.0 (3/13) Meter, PD Series, E3 S6, S7 All Parts List Bulletin PO01005 32 68 29 17 68 16 14 19 15 68 20 54 22 18 24 58 23 10 59 41 31 56 55 57 47 52 25 27 34 34 26 40 67 44 39 The Most Trusted

More information

Smith Meter PD Meter Meter, PD Series, F4 S6, S7. Parts List Bulletin PO01012 Issue/Rev 0.0 (7/13)

Smith Meter PD Meter Meter, PD Series, F4 S6, S7. Parts List Bulletin PO01012 Issue/Rev 0.0 (7/13) Smith Meter PD Meter Meter, PD Series, F4 S6, S7 Parts List Bulletin PO01012 Issue/Rev 0.0 (7/13) 17 34 71 71 19 33 21 71 58 35 68 25 26 10 44 60 59 61 24 55 54 57 16 14 29 36 28 42 70 48 27 41 32 6 47

More information

Meter, PD Series H8-S1, S3, S5, S6, & S7 Parts List

Meter, PD Series H8-S1, S3, S5, S6, & S7 Parts List Meter, PD Series H8-S1, S3, S5, S6, & S7 Parts List Issue/Rev. 0.0 (1/14) Bulletin PO01010 S1 S3, S5, S6, S7 The Most Trusted Name In Measurement Inner Mechanism Page 2 PO01010 Issue/Rev. 0.0 (1/14) Item

More information

Meter, PD Model T-11 and T-11NF Parts List

Meter, PD Model T-11 and T-11NF Parts List Form No. P0565.11 Meter, PD Model T-11 and T-11NF Parts List Issue/Rev. 1.1 (9/11) Bulletin P0565.11 The Most Trusted Name In Measurement Item G Description Calibrator Version Qty. Part Number Item Description

More information

Form No. P Meter, PD Series H8-S3 Flat Plate Cover Parts List

Form No. P Meter, PD Series H8-S3 Flat Plate Cover Parts List Form No. P0550.50 Meter, PD Series H8-S3 Flat Plate Cover Parts List Issue/Rev. 0.0 (10/04) Bulletin P0550.50 The Most Trusted Name In Measurement Inner Mechanism Page P0550.50 Issue/Rev. 0.0 (10/04) Item

More information

K Page 1 of 48 Air Intake - Pg. 17

K Page 1 of 48 Air Intake - Pg. 17 K532-53168 Page 1 of 48 Air Intake - Pg. 17 Ref # Part Number Qty Description 24 25 041 06-S 1 Gasket, elbow 25 48 054 09 1 Elbow, air cleaner Discontinued not available at Kohler Co. 35 277116-S 1 Brace,

More information

Parts List for Type S Flowmeters

Parts List for Type S Flowmeters P101 Rev. C Type S Flowmeter Parts List: 5/8" 2" Type S Flowmeters Parts List for Type S Flowmeters 5/8" and 3/4" Type S Flowmeters with 100 and 600 Series Register and Internal Gear Train 28 3.0, 3.1

More information

Replaces Lesco 300 & 500 Parts

Replaces Lesco 300 & 500 Parts Replaces Lesco 300 & 500 Parts ItemNo R&R PartNo PartNo Description Req. Qty Price R&R Reels Available, Lifetime Guaranteed 1 R502871 020800 R&R Reel, 9 Blade, Fits 300 1 32,100 1 R502871H R&R Only R&R

More information

Key No. Description Part No.

Key No. Description Part No. ENGINE ASSEMBLY 45 319042 10 (SEE ENGINE MANUAL) ENGINE 12 SCREW, 5/16 18 710024 13 WASHER 120638 41 GUIDE, ROD BELT 3949 42 PLASTIC WASHER 6711 43 WASHER 120638 44 SCREW, 5/16 24X 1.00 910828 45 SPACER

More information

Reproduction. Not for 27" & 29" TWO STAGE INTERMEDIATE SNOWTHROWERS Parts Manual for M1227E M1227EX M1529E

Reproduction. Not for 27 & 29 TWO STAGE INTERMEDIATE SNOWTHROWERS Parts Manual for M1227E M1227EX M1529E Parts Manual for 27" & 29" TWO STAGE INTERMEDIATE SNOWTHROWERS 2011 Model No. Description 1696001 M1227E 1696002 M1227EX 1696003 M1529E Briggs & Stratton Yard Power Products Group 535 Macon Road McDonough,

More information

Replaces Lesco 300 & 500 Parts Cutting Unit

Replaces Lesco 300 & 500 Parts Cutting Unit Replaces Lesco 300 & 500 Parts 3A 11 10 10 11 17 3 1 15 2 13 1 20 1 20 1 21 2 2 22 1B 30 1A 10 14 31 25 23 24 10 4 27 23 25 26 14 24 10 13A 5 5A 4A 16 0 R&R Reels Available, Lifetime Guaranteed 1 R50271

More information

Parts Manual STRIKER Striker 2840 Parts List - PN Printed in USA 03/18/08

Parts Manual STRIKER Striker 2840 Parts List - PN Printed in USA 03/18/08 Parts Manual STRIKER 2840 Striker 2840 Parts List - PN 238155 - Printed in USA 03/18/08 Standard Parts Recommended General Wear Parts Ref No Part Description Qty Part No 1 Squeegee Hose Assembly

More information

a division of Enviro Safety Products

a division of Enviro Safety Products www.minutemanvac.com, a division of Enviro Safety Products.800.637.6606 Chassis 3 4 5 3 4 6 7 8 5 0 0 6 8 0 7 4 3 5 6 7 E 7e www.minutemanvac.com, a division of Enviro Safety Products.800.637.6606 Page

More information

ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 1 of 52 A-ARM, FLOOR PANEL, AND BUMPER ASSEMBLY

ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 1 of 52 A-ARM, FLOOR PANEL, AND BUMPER ASSEMBLY 2004 ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 1 of 52 A-ARM, FLOOR PANEL, AND BUMPER ASSEMBLY 2004 ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 2 of 52 A-ARM, FLOOR PANEL, AND BUMPER

More information

APAS - 72 Parts Manual

APAS - 72 Parts Manual VERSION HISTORY The table below summarizes the history of this document as it is published onto the company website(s). It identifies the version, date of issue and revisions and changes. VERSION DATE

More information

REPAIR PARTS HYDRO GEAR TRANSAXLE - MODEL NUMBER

REPAIR PARTS HYDRO GEAR TRANSAXLE - MODEL NUMBER REPAIR PARTS HYDRO GEAR TRANSAXLE - MODEL NUMBER 319-0650 REPAIR PARTS HYDRO GEAR TRANSAXLE MODEL NUMBER 319-0650 NO. NO DESCRIPTION 1 532 14 29-30 Housing, Lower 2 532 14 29-31 Assembly, Upper Housing

More information

1650EXLT, ,

1650EXLT, , 1650EXLT, 96193008901, 2012-10 "CHASSIS, ENGINE & PULLEYS" - 000 00 00-00 W/O DESCRIPTION 1 B&S 21M307-0135-F1 FOR SERVICE & PARTS 1-800-233-3723 1 532 42 92-03 FRAME 1 2 532 15 04-06 BOLT 1 3 532 42 88-67

More information

REPAIR PART NUMBER NUMBER DESCRIPTION 0137 ELE 0136 ELE 12 VOLT SOLENOID

REPAIR PART NUMBER NUMBER DESCRIPTION 0137 ELE 0136 ELE 12 VOLT SOLENOID PART REPAIR PART NUMBER NUMBER DESCRIPTION 0137 ELE 0136 ELE 12 VOLT SOLENOID 0203 WHL 0250 WHL WHEEL HUB 0251 WHL AXLE 0252 WHL DUST CAPS 0253 WHL TIRE - 210 SP 0204 WHL 0211 WHL TIRE & WHEEL - SP 0250

More information

ELECTRIC TOOL PARTS LIST

ELECTRIC TOOL PARTS LIST Hitachi Power Tools LIST E933 ELECTRIC TOOL PARTS LIST SLIDE COMPOUND SAW Model 2004 2 13 (E2) 1 2 3 4 5 6 7 40 41 601 8 9 10 11 12 26 27 28 29 30 29 602 618 602 10 9 42 603 604 605 606 607 608 14 43 13

More information

REPLACEMENT PARTS LIST FOR MODELS:

REPLACEMENT PARTS LIST FOR MODELS: Your Peace of Mind is Our Top Priority Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. MAIL TO: P.O. BOX 16347

More information

6146XX-X OPEN STYLE HOSE REELS

6146XX-X OPEN STYLE HOSE REELS OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION & MAINTENANCE 6146XX-XXX OPEN STYLE HOSE REELS LOW, MEDIUM & HIGH PRESSURE (FOR AIR, WATER & PETROLEUM PRODUCTS) 6146XX-X RELEASED: 2-5-90 REVISED:

More information

LIST NO.E078 ENGINE. ENGINE BRUSH CUTTER Model CG 27EAS (E1)

LIST NO.E078 ENGINE. ENGINE BRUSH CUTTER Model CG 27EAS (E1) LIST E078 (E1) ENGINE ENGINE BRUSH CUTTER Model 2010 7 16 A B 1 2 1 3 4 5 6 7 16 15 17 13 8 9 10 11 12 13 14 15 18 19 20 11 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

More information

MUELLER. Mega-Lite Drilling Machine. Reliable Connections. table of contents PAGE. Equipment 2. Operating Instructions 3-4. Parts Information 5

MUELLER. Mega-Lite Drilling Machine. Reliable Connections. table of contents PAGE. Equipment 2. Operating Instructions 3-4. Parts Information 5 operating Instructions manual MUELLER Mega-Lite Drilling Machine table of contents PAGE Equipment 2 Operating Instructions 3-4 Parts Information 5 Travel Charts 6-11! WARNING: 1. Read and follow instructions

More information

Model DE-1, VDE-1 and DE-2 Air Release Heads

Model DE-1, VDE-1 and DE-2 Air Release Heads SPECIFICATIONS Model DE-1, VDE-1 and DE-2 Air Release Heads Bulletin SS03030 Issue/Rev. 0.7 (8/17) Smith Meter Air Eliminator The Smith Meter Model DE Air Release Heads are dual-electric float switch devices

More information

Dean Pump Self-Priming Chemical Process Pumps

Dean Pump Self-Priming Chemical Process Pumps Bulletin C 1.2.34.7 Dean Pump Self-Priming Chemical Process Pumps php Series HEAD CAPACITY RANGE CHARTS php Self Primer - 2 Pole 3500 RPM 500 CAPACITY M 3 /HR 2900 RPM 50 HERTZ 25 50 75 125 150 400 TOTAL

More information

R152SVBBC. Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar I S E R V I C E

R152SVBBC. Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar I S E R V I C E S E R V I C E 5 I0500103 IPL, R152SVBBC, 2005-04, 544 08 36-01 95417024202 R152SVBBC Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar 544 08 36-01 2 NO. NO. DESCRIPTION

More information

GT20 String Trimmer UT Page 1 of 16 Accessories

GT20 String Trimmer UT Page 1 of 16 Accessories GT20 String Trimmer UT-26037 Page 1 of 16 Accessories GT20 String Trimmer UT-26037 Page 2 of 16 Accessories Ref # Part Number Qty S/P/F Description 1 PS01443 1 TOOL KIT 2 DG07819 1 /P STRAP 3 G07830 1

More information

B-Too Drilling and Tapping Machine

B-Too Drilling and Tapping Machine Material Specifications Powered by hand or with Ridgid 690 (TM-29) High strength, modular aluminum and steel components Inserts any 3 /4" to 1" corporation stop under pressure Extracts threaded corporation

More information

I Illustrated Parts List 650 CRT B. Tiller. Repair Parts Manual

I Illustrated Parts List 650 CRT B. Tiller. Repair Parts Manual Illustrated Parts List 2001-11 I0102042 650 CRT B 954328030 Repair Parts Manual Tiller HANDLE ASSEMBLY 1 532 18 06-34 Control, Throttle 2 532 00 92-66 Grip, Handle 4 532 15 92-28 Bar Assembly, Control

More information

TR-AUGER. Section C INDEX BOOT / HOPPER

TR-AUGER. Section C INDEX BOOT / HOPPER INDEX Section C TR-AUGER BOOT / HOPPER Description Page TR80 / TR100 x 51' basic auger... C2-3 TR80 / TR100 x 61' basic auger... C4-5 TR80 / TR100 x 71' basic auger... C6-7 TR Swing hopper... C8-9 TR-Boot

More information

Mini-Mac Applicator Specification Sheet Part No (Replaces )

Mini-Mac Applicator Specification Sheet Part No (Replaces ) Mini-Mac Applicator Specification Sheet Part No. 63801-2900 (Replaces 19814-1000) FEATURES ΠQuick set-up time; plus the crimp height, track and feed adjustments can be preset in applicator ΠConductor

More information

REPLACEMENT PARTS LIST FOR MODELS:

REPLACEMENT PARTS LIST FOR MODELS: Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. MAIL TO: P.O. BOX 16347 Louisville, KY 406-0347 SHIP TO: 3649

More information

Post Hole Digger AP-SA PK Parts Manual. Copyright 2018 Printed 07/11/18

Post Hole Digger AP-SA PK Parts Manual. Copyright 2018 Printed 07/11/18 Post Hole Digger AP-SA20 37692 317-215PK Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your

More information

GT21 String Trimmer UT Page 1 of 16 Accessories

GT21 String Trimmer UT Page 1 of 16 Accessories GT21 String Trimmer UT-26038 Page 1 of 16 Accessories GT21 String Trimmer UT-26038 Page 2 of 16 Accessories Ref # Part Number Qty S/P/F Description 1 PS01443 1 TOOL KIT 2 DG07819 1 /P STRAP 3 G07830 1

More information

GX200 QX2 ENGINE, JPN, VIN# GCAE Page 1 of 34 AIR CLEANER (DUAL)

GX200 QX2 ENGINE, JPN, VIN# GCAE Page 1 of 34 AIR CLEANER (DUAL) GX200 QX2 ENGINE, JPN, VIN# GCAE-1000001 Page 1 of 34 AIR CLEANER (DUAL) GX200 QX2 ENGINE, JPN, VIN# GCAE-1000001 Page 2 of 34 Ref # Part Number Qty Description AIR CLEANER (DUAL) 1 16271-ZE1-000 1 GASKET,

More information

CB 350. Spare parts list. Hydraulic concrete buster. CB 350 s/n DEQ Construction Tools GmbH No

CB 350. Spare parts list. Hydraulic concrete buster. CB 350 s/n DEQ Construction Tools GmbH No CB 350 Spare parts list Hydraulic concrete buster CB 350 s/n DEQ179000-2018 Construction Tools GmbH No. 3390803501 2018-01-01 General information This spare parts list applies to the following: Part number

More information

Post Hole Digger SA P Parts Manual. Copyright 2018 Printed 01/29/18

Post Hole Digger SA P Parts Manual. Copyright 2018 Printed 01/29/18 Post Hole Digger SA20 37305 317-215P Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life

More information

Installation, Operation and Maintenance Manual for Back Pressure Regulator

Installation, Operation and Maintenance Manual for Back Pressure Regulator Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN

More information

Parts Manual. Scraper Hitches PH:

Parts Manual. Scraper Hitches PH: Parts Manual Scraper Hitches 12-18 1 Table of Contents A123299 Swivel Hitch 3 A1063527 Super Swivel Hitch 4 A125056 Yoke Hitch 5 A125057 Super Capacity Hitch 6 A125223 MDU Hitch 7 A123224 360 Swivel Hitch

More information

GT22 Trimmer/Brushcutter UT Page 1 of 16 Accessories

GT22 Trimmer/Brushcutter UT Page 1 of 16 Accessories GT22 Trimmer/Brushcutter UT-26039 Page 1 of 16 Accessories GT22 Trimmer/Brushcutter UT-26039 Page 2 of 16 Accessories Ref # Part Number Qty S/P/F Description 1 UP00578 1 TOOL KIT 2 DG07819 1 /P STRAP 3

More information

HAXL-TEC-11.2 D170 AND D190 GENUINE SPICER OUTPUT SHAFT BEARING RACE PARTS CHANGE - REVISED

HAXL-TEC-11.2 D170 AND D190 GENUINE SPICER OUTPUT SHAFT BEARING RACE PARTS CHANGE - REVISED HAXL-TEC-11.2 D170 AND D190 GENUINE SPICER OUTPUT SHAFT BEARING RACE PARTS CHANGE - REVISED DATE: May 17, 2013 SERVICE/TECHNICAL TO: All Dana Spicer Parts Heavy Axle Customers Affected Models: All D170,

More information

Spare parts list ( ) Spare parts list HD 1090 WS *

Spare parts list ( ) Spare parts list HD 1090 WS * Spare parts list (5.955-706.0) Spare parts list HD 1090 WS * 26.01.2015 www.kaercher.com EN Table of contents Spare parts list HD 1090 WS * (5.955-706.0)... 6 10 Individual parts... 7 11 Individual parts...

More information

LIST NO. E948 SLIDE COMPOUND SAW. Model C 8FSE (E1)

LIST NO. E948 SLIDE COMPOUND SAW. Model C 8FSE (E1) Model C FSE SLIDE COMPOUND SAW LIST E94 (E1) 42 A A 1 2 3 4 10 5 6 9 11 14 15 12 16 1 1 19 20 21 23 26 25 24 29 30 2 2 33 31 32 53 4 4 49 46 34 36 3 39 40 35 3 45 42 50 54 56 5 5 52 13 22 41 51 612 613

More information

30cc STRING TRIMMERS 30cc BRUSHCUTTERS REPAIR SHEET MODEL NUMBERS RY30020B, RY30040B, RY30060B

30cc STRING TRIMMERS 30cc BRUSHCUTTERS REPAIR SHEET MODEL NUMBERS RY30020B, RY30040B, RY30060B 30cc STRING TRIMMERS 30cc BRUSHCUTTERS REPAIR SHEET MODEL NUMBERS RY30020B, RY30040B, RY30060B 6 9 8 10 1 7 15 19 13 16 18 4 17 3 2 11 12 5 20 26 30 22 27 25 13 24 21 23 29 28 31 2 FIGURE A PARTS LIST

More information

KTM OM-2 SPLIT BODY FLOATING BALL VALVES INSTALLATION AND MAINTENANCE INSTRUCTIONS

KTM OM-2 SPLIT BODY FLOATING BALL VALVES INSTALLATION AND MAINTENANCE INSTRUCTIONS Before installation these instructions must be fully read and understood SECTION 1 - STORAGE 1.1 Preparation and preservation for storage All valves should be properly packed in order to protect the parts

More information

Installing a Christie One Mount/Christie One Mount Plus

Installing a Christie One Mount/Christie One Mount Plus Installing a Christie One Mount/Christie One Mount Plus This document provides instructions for installing the Christie One Mount or Christie One Mount Plus and optional accessories to mount Christie projectors

More information

90AETO 04 (6H16) 1C6H1-664E1

90AETO 04 (6H16) 1C6H1-664E1 ETO 04 (6H16) 1C6H1-664E1 ( ) FOREWORD This Parts Catalogue is related to the parts for the model(s) on the cover page. When you are ordering replacement parts, please refer to this Parts Catalogue and

More information

MODEL 6000SA STAMP AFFIXER Parts Manual. Postmatic, Inc.

MODEL 6000SA STAMP AFFIXER Parts Manual. Postmatic, Inc. POSTMATIC, INC. MODEL 6000SA STAMP AFFIXER Parts Manual Postmatic, Inc. 9405 Holly Street Ste D Minneapolis, MN 55433 Phone 763-784-6046 Toll Free 888-784-6046 Fax 763-784-9433 Table of Contents Assembly

More information

REPLACEMENT PARTS LIST FOR MODELS: Consult factory for all other models

REPLACEMENT PARTS LIST FOR MODELS: Consult factory for all other models Your Peace of Mind is Our Top Priority Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. MAIL TO: P.O. BOX 134 Louisville,

More information

55DEHD 07 (63S5) 1F63S-561E1

55DEHD 07 (63S5) 1F63S-561E1 55DEHD 07 () 1F63S-561E1 ( ) 55DEHD PARTS CATALOGUE 2006 by Yamaha Motor Co., Ltd. 1st edition, November 2006 All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha

More information

VK/VP SERIES : Sealless Vertical Pump. Assembling Instructions 2010

VK/VP SERIES : Sealless Vertical Pump. Assembling Instructions 2010 VK/VP SERIES : Sealless Vertical Pump Assembling Instructions 2010 20610 Manhattan Place Suite 116 Torrance, CA 90501 Phone: 310-328-9114 Fax: 310-328-9441 1. Motor Shaft and Pump Base (1) (2) Place a

More information

DP Spare parts list. Demolition pulverizer. DP 2800 s/n DEQ Construction Tools GmbH No

DP Spare parts list. Demolition pulverizer. DP 2800 s/n DEQ Construction Tools GmbH No DP 2800 Spare parts list Demolition pulverizer DP 2800 s/n DEQ139266-2018 Construction Tools GmbH No. 3390719501 2018-01-01 General information This spare parts list applies to the following: Part number

More information

Copyright MAY, 2008 By Grizzly Industrial, Inc. Warning: No portion of this manual may be reproduced in any shape or form without the written

Copyright MAY, 2008 By Grizzly Industrial, Inc. Warning: No portion of this manual may be reproduced in any shape or form without the written MODEL G5791/G5792 17-PIECE 1 2" IMPACT WRENCH & RATCHET KIT INSTRUCTION MANUAL Copyright MAY, 2008 By Grizzly Industrial, Inc. Warning: No portion of this manual may be reproduced in any shape or form

More information

Parts. Ultra 395/495/595t Ultra Max II 490/495/595t S. Korean patent VAC psi (228 bar, 22.8 MPa) Maximum Working Pressure

Parts. Ultra 395/495/595t Ultra Max II 490/495/595t S. Korean patent VAC psi (228 bar, 22.8 MPa) Maximum Working Pressure Parts Ultra 395/495/595t Ultra Max II 490/495/595t Korean patent 10--0579681 309675S EN 3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure 0 VAC Type Stand Series Lo-boy Series Hi-boy Series Ultra 395t

More information

Reproduction. Not for. Parts Manual. VCS404 16" Walk Behind Mower. Models

Reproduction. Not for. Parts Manual. VCS404 16 Walk Behind Mower. Models Parts Manual Models Mfg. No. Description VCS404-BA Vantage 16" Walk Behind Mower VCS404-BB Vantage 16" Walk Behind Mower VCS404-BC Vantage 16" Walk Behind Mower VCS404 16" Walk Behind Mower Manual Part

More information

S E R V I C E I IPL, LR10 36, LR Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar

S E R V I C E I IPL, LR10 36, LR Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar S E R V I C E I9400033 IPL, LR10 36, 1994-01 LR10 36 Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar 1 874 76 04-12 Bolt Fin Hex 1/4-20 x 3/4 8 873 68 04-00 Locknot W/lnsert

More information

Operator s/parts Manual

Operator s/parts Manual Operator s/parts Manual 24 & 30 Folding No-Till Drill Harrow Manufacturing, Inc. P.O. Box 5060 Salina, Kansas 67402-5060! Read the Operator s manual entirely. When you see this symbol, the subsequent instructions

More information

MUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5.

MUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5. Installation Instructions manual MUELLER table of contents PAGE A-20814 Wall Type General Information 2 Technical Data/ Dimensions Installation 4-5 Maintenance 6 Parts 7 Indicator Post! WARNING: 1. Read

More information

MID-CUT AND FRONT CUT UNITS

MID-CUT AND FRONT CUT UNITS MID-CUT AND FRONT CUT UNITS Instructional / Parts Manual Part Number: January 00 08 ( 0 & 0 ) & Adapter Kits ( 07, 08, 09, 060, 06 & 06) Table of Contents PROWLER GRASS CATCHER TWO PACKAGED ITEMS LIST

More information

R152SVH. Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar

R152SVH. Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar SERVICE I0700098 IPL, R152 SVH, 2007-03, 544 39 00-02 96141013300 R152SVH Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar 544 39 00-02 2 4 3 1 532 19 05-82 Handle, Grassbag,

More information

ILLUSTRATED PARTS LIST MFG. ID NO CUSTOMER CATALOG NO. MRT6 PRODUCT NO

ILLUSTRATED PARTS LIST MFG. ID NO CUSTOMER CATALOG NO. MRT6 PRODUCT NO ILLUSTRATED PARTS LIST MFG. ID NO. 600020 CUSTOMER CATALOG NO. MRT6 PRODUCT NO. 60 00-2 532 44 6-04 HANDLE ASSEMBLY 6 44 43 2 42 4 2 3 0 42 27 42 45 5 2 6 20 handle_assy_06 532 8 4-82 Control, Throttle

More information

GEN20AD-GEN20AL-GEN18AN

GEN20AD-GEN20AL-GEN18AN AD-- Parts List 02-August-16 This parts list is current as of the above revision date. See http://www.rheempartslists.net/92-42800-ad--.pdf for the current revision. Standby Generators Table of Contents

More information

Part No (Low Changeover) Part No (High Changeover) Part No (High Changeover)

Part No (Low Changeover) Part No (High Changeover) Part No (High Changeover) ELX-S TM UNIT 60% 665020 (Low Changeover) 305274 (High Changeover) 305305 (High Changeover) IMPORTANT: This catalog is published as an aid in identifying the detail parts that make up this complete device.

More information

WELL COMPLETION & PROTECTION. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD

WELL COMPLETION & PROTECTION. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD WELL COMPLETION & PROTECTION MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com WELL COMPLETION & PROTECTION TABLE OF CONTENTS TABLE OF CONTENTS (FLUSHMOUNTS)... 2-5 MONITORING

More information

KEY PART KEY PART NO. NO. DESCRIPTION NO. NO. DESCRIPTION

KEY PART KEY PART NO. NO. DESCRIPTION NO. NO. DESCRIPTION 1 874 78 04-10 Bolt, Fin Hex 1/4-20 x 5/8 12 532 13 09-86 Lens, LH 3 532 12 84-45 Bracket, Pivot Hood LH 13 532 13 09-84 Grille 4 819 09 10-16 Washer, Flat 1/4 21 532 12 69-38 Bumper, Hood 5 817 49 05-12

More information

SPARE PARTS LIST. CHAIN SAWS 450, from

SPARE PARTS LIST. CHAIN SAWS 450, from SPARE PARTS LIST CHAIN SAWS 450, from 2011-09 - ACCESSORIES 450, from 2011-09 - ACCESSORIES 450, from 2011-09 - Ref Part No Description Remark QTY KIT 1 503 55 85-04 TOOL 1 CARBURETOR 450, from 2011-09

More information

REPLACEMENT PARTS LIST FOR GRINDER MODELS:

REPLACEMENT PARTS LIST FOR GRINDER MODELS: Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. 50/0Hz FM2_Ec 1117 Supersedes 091 MAIL TO: P.O. BOX 17 Louisville,

More information

Replaces Ransomes 250 Parts Models & Cutting Unit

Replaces Ransomes 250 Parts Models & Cutting Unit Replaces Ransomes 50 Parts Models 60000 & 6000 6 4 5 5 5 6 6 0 0 0 6 56 4 066 R&R Reels Available, Lifetime Guaranteed R0600 0600 Use R456 R456 456 R&R Reel, Blade, with Splined Insert R0604 0604 R&R Reel,

More information

CM MBC & CM MBC PARTS LIST

CM MBC & CM MBC PARTS LIST 8650 Enterprise Drive, Peosta IA 52068 319-556-7484 / Fax 319-556-1235 CM-1500-0MBC & CM-1503-1MBC Engine Oil Grade: Engine Oil Capacity: Pump Oil Grade: Pump Oil Capacity: Nozzle Size: PARTS LIST (After

More information

Constant Pressure Crude Oil Container Model CPCCP

Constant Pressure Crude Oil Container Model CPCCP Installation, Operations, and Maintenance Manual Constant Pressure Crude Oil Container Model CPCCP The information in this manual has been carefully checked for accuracy and is intended to be used as a

More information

WHEATLEY Series 500 Swing Check Valve

WHEATLEY Series 500 Swing Check Valve Document Number: TC003001-13 Revision: 02 WHEATLEY Series 500 Swing Check Valve Installation, Operation, and Maintenance Manual TABLE OF CONTENTS BILL OF MATERIALS...3 SCOPE...5 INSTALLATION AND OPERATION

More information

Index Table. Model 794. Installation, Operating and Maintenance Instructions

Index Table. Model 794. Installation, Operating and Maintenance Instructions CLOCKWISE MANUAL MAKING INTO CCW TABLE Index Table Model 794 Installation, Operating and Maintenance Instructions Black & Webster Products Division 545 Hupp Ave. P.O. Box 831, Jackson, Michigan 49204 2009

More information

Threaded Closures Installation, Operation & Maintenance

Threaded Closures Installation, Operation & Maintenance Howard Street Bulletin TT Louisville, KY 0 USA Revised Jan 0 Phone 0--0 Fax 0--00 Threaded Closures Installation, Operation & Maintenance Caution: Operating a closure can be a hazardous activity and certain

More information

Crosby style JCE Safety Valve Installation, Maintenance and Adjustment Instructions CROSBY

Crosby style JCE Safety Valve Installation, Maintenance and Adjustment Instructions CROSBY CROSBY Table of contents 1. Installation 1 1.1. Drainage 1 1.2. Discharge pipework 1 1.3. Preparation for installation 1 2. Pressure adjustment 1 3. Maintenance 1 4. Dismantling 1 4.1. All valve types

More information

1004D3/1005E3 API Bottom Loading Coupler. Installation, Operation & Maintenance (IOM) Manual

1004D3/1005E3 API Bottom Loading Coupler. Installation, Operation & Maintenance (IOM) Manual Document No. H32094PA, Rev. 0 Issue Date: September 4, 2014 Supersedes: March 1, 2013 1004D3/1005E3 API Bottom Loading Coupler Installation, Operation & Maintenance (IOM) Manual 2726 Henkle Drive Lebanon,

More information

DIRECT DRIVE DIXIE DOUBLE SEAMER Model 25D

DIRECT DRIVE DIXIE DOUBLE SEAMER Model 25D OPERATOR'S MANUAL DIRECT DRIVE DIXIE DOUBLE SEAMER Model 25D LUBRICATE DAILY: A. Gears inside gear housing at chuck shaft (1) Oil B. Seam rolls and cam rolls (4) - Oil C. Seam roll levers through gear

More information

Lock-N-Load. Bullet Feeder

Lock-N-Load. Bullet Feeder Lock-N-Load Bullet Feeder table of contents steps Overview... 2 List of required hand tools... 2 1: Mounting the Bullet Feeder to the Bench... 3 2: Mounting the Bullet Feed Hopper... 4 3: Bullet Feed Hopper

More information

SpeciÞcations. Engine Dimensions Dimensions in millimeters. Inch equivalents shown in [].

SpeciÞcations. Engine Dimensions Dimensions in millimeters. Inch equivalents shown in []. SpeciÞcations Engine Dimensions Dimensions in millimeters. Inch equivalents shown in []. Ê ßÔ Ê ÛÝ Ñ Ê Û ÎÊ Û É 5 ENGINE IDENTIFICATION NUMBERS Kohler engine identiþcation numbers (model, speciþcation

More information

Using Dividing Plates with the Rotary Table

Using Dividing Plates with the Rotary Table The premier source of parts and accessories for mini lathes and mini mills. Using Dividing Plates with the Rotary Table Dividing plates allow you to precisely divide a circle into a number of divisions

More information

High Pressure Equipment Taper Seal Valves, Fittings and Tubing

High Pressure Equipment Taper Seal Valves, Fittings and Tubing igh quipment Taper Seal Valves, ittings and Tubing 0,000 and,000 psi service igh quipment Company has developed the Taper Seal line of products to assure safe and easy plumbing through,000 psi. These needle

More information

Divider Systems. Rear Tire Divider (RTD) Section 4. Model Years Model Years Model Years

Divider Systems. Rear Tire Divider (RTD) Section 4. Model Years Model Years Model Years Divider Systems Rear Tire Divider (RTD) Section 4 Model Years 1988 1993... 2-3 Model Years 1994 1996... 4-5 Model Years 1997 2010... 6-7 Model Years 2011 Present, Upper... 8-9 Model Years 2011 Present,

More information

Landing Gear Accessories

Landing Gear Accessories RIGHT QUALITY RIGHT PRICE RIGHT AWAY Landing Gear Accessories www.goldlinequalityparts.com Edition 2016-02 powered by Introduction, Warranty and Contact Information... 1 Crank Handles 7/8" Dia. Shaft Crank

More information

Y:\Machine Manuals & Spare Parts Lists\PARTS BREAKDOWN\Commercial CW Gas\HD850WS Page 1

Y:\Machine Manuals & Spare Parts Lists\PARTS BREAKDOWN\Commercial CW Gas\HD850WS Page 1 1.0 PIECE PARTS - parts listing 1 5311-0710 Nut 1 2 5443-2820 Hose Stem 1 3 6362-3950 O-Ring Seal 14.0x1.78 1 4 6414-2820 Strainer 1 5 6313-0030 Spring 2 6 5321-1980 Handhold 1 7 5066-2120 Cover 1 8 5363-1350

More information

Operating Instructions Models and Hydrostatic Test Pumps

Operating Instructions Models and Hydrostatic Test Pumps Operating Instructions Models 46453 and 464530 Hydrostatic Test Pumps 46453 DIMENSIONS: 27 (67.5cm) L x 22 (55cm) W x 34 (85cm) H WEIGHT: 160 lbs. 73 kg PUMP: Twin piston: Positive displacement type Inlet

More information

Operating Instructions Models and Hydrostatic Test Pumps

Operating Instructions Models and Hydrostatic Test Pumps Operating Instructions Models 33100 and 33101 Hydrostatic Test Pumps 33100 DIMENSIONS: WEIGHT: PUMP: MOTOR: CONTROL: GAUGE: DISCHARGE HOSE: 16 (40cm) L x 22 (55cm) W x 18 (45cm) H 87 lbs., 39.5 kg Triplex

More information

Pressure Dump Valve Service Kit for Series 2300 Units

Pressure Dump Valve Service Kit for Series 2300 Units Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit

More information

PVQ 13 A2 R SE 1 S 20 C-11 D

PVQ 13 A2 R SE 1 S 20 C-11 D PVQ - Variable Displacement Piston Pump PVQ 13 A2 R SE 1 S 2 C-11 D 1 2 3 4 6 7 8 9 1 1 Model Series PVQ Inline Piston Pump Variable Volume Quiet Series 4 Rotation Viewed from shaft end R Right hand, standard

More information

REPAIR PARTS MANUAL MODEL NO. BH55Y21RH MFG. ID. NO Rotary Lawn Mower

REPAIR PARTS MANUAL MODEL NO. BH55Y21RH MFG. ID. NO Rotary Lawn Mower REPAIR PARTS MANUAL MODEL NO. BH55Y21RH MFG. ID. NO. 96141000100 Rotary Lawn Mower 532 19 53-42 Rev. 1 12.08.04 BY Printed in U.S.A. ROTARY LAWN MOWER - - MODEL NO. BH55Y21RH (96141000100) - PRODUCT NO.

More information

BARNES PROSSER CROWN SERVICE PARTS

BARNES PROSSER CROWN SERVICE PARTS MODEL PART NO. SGV3002L 084798 SGV3022L 084799 SGV3062L 084800 SGV3032L 084801 SGV3042L 084802 SGV3052L 088861 SGV5002L 084803 SGV5022L 084804 SGV5062L 084805 SGV5032L 084806 SGV5042L 084807 SGV5052L 088862

More information

This Manual contains standard Production Product Identification Numbers. Special Engineered Options not Included. 100D MS Standard Mast

This Manual contains standard Production Product Identification Numbers. Special Engineered Options not Included. 100D MS Standard Mast P ARTS MANUAL This Manual contains standard Production Product Identification Numbers. Special Engineered Options not Included 100D MS Standard Mast For PIDs 100D-MS-001 THROUGH PRESENT FOR PARTS AND SERVICE:

More information

Spare parts list ( ) Spare parts list HDS 990

Spare parts list ( ) Spare parts list HDS 990 Spare parts list (5.952-855.0) Spare parts list HDS 990 13.10.2014 www.kaercher.com EN Page 2 Page 3 Page 4 Table of contents Spare parts list HDS 990 (5.952-855.0)... 6 10 Individual parts... 7 49 Spare

More information

REPAIR PARTS MANUAL MODEL NUMBER BH55Y21RHA. Rotary Lawn Mower Rev BY Printed in U.S.A.

REPAIR PARTS MANUAL MODEL NUMBER BH55Y21RHA. Rotary Lawn Mower Rev BY Printed in U.S.A. REPAIR PARTS MANUAL MODEL NUMBER BH55Y21RHA Rotary Lawn Mower 532 18 92-21 Rev. 1 02.11.04 BY Printed in U.S.A. 2 ROTARY LAWN MOWER - - MODEL NO. BH55Y21RH (BH55Y21RHA) - PRODUCT NO. 964 77 46-01 ROTARY

More information

MUELLER A A Non-Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3.

MUELLER A A Non-Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3. Installation Instructions manual MUELLER table of contents PAGE A-20808 General Information 2 Technical Data 3 Dimensions 4 A-20809 Non-Adjustable Installation 5-6 Parts 7 Maintenance 8 Vertical Indicator

More information

Installation Instructions MODEL VSTI-A020 Tank Indicator Installation Model: VSTI-A020, Stainless Reverse Read System Versa Steel Inc. Guide Cables No

Installation Instructions MODEL VSTI-A020 Tank Indicator Installation Model: VSTI-A020, Stainless Reverse Read System Versa Steel Inc. Guide Cables No Tank Indicator Installation Model: VSTI-A020, Stainless Reverse Read System Guide Cables No Guide Cables 1 August 4, 2011 Assembly Instructions: (Shown with a 2 board, 12 ft kit) ITEM NO. PART NUMBER DESCRIPTION

More information

Quincy QSG Gasends 225, 430, 580, 730 & 850

Quincy QSG Gasends 225, 430, 580, 730 & 850 Quincy QSG Gasends 225, 430, 580, 730 & 850 Parts Manual This publication contains important safety information and should be made available to all personnel who operate and/or maintain this product. Carefully

More information

7 FORAGE AND HARVESTING

7 FORAGE AND HARVESTING Sickle Assemblies 4560R2 Sickle section, 3" x 3-1/4" underserrated. X-Hvy gauge, Chrome finish. Uses rivet RIV101. 142669H L. FT, SECTION NUMBER 141198, TYPE UND 14260 STEEL HEAT THREADED HEADS. Section

More information

ELC7. Bobcat 7 Pin CanBus Electric Control System. Model Number ELC7. Phone: ELC7 08/10/15

ELC7. Bobcat 7 Pin CanBus Electric Control System. Model Number ELC7. Phone: ELC7 08/10/15 ELC7 Bobcat 7 Pin CanBus Electric Control System Model Number ELC7. Phone: 320-393-7080 08/0/5 ELC7 Features of Virnig Mfg. Inc. ELC7 Bobcat 7 Pin CanBus Electric Control System include: Works with Standard

More information

FTR Series Track Roller Assembly Flanged Stud Type Concentric Ball & Tapered Roller Bearings

FTR Series Track Roller Assembly Flanged Stud Type Concentric Ball & Tapered Roller Bearings FTR Series Track Assembly d Type Concentric Ball & Tapered Bearings Type Track A B C D F FL H L M SD SL T Hex Dia + FTR-1.00 1.000 0.75 0.437 1.00 7/16-20 0.50 3/16 1.38 0.22 0.5 0.03 0.78 FTR-1.125 1.125

More information

Wellhead Mast. Installation and Operation Guide. Nanometrics Inc. Kanata, Ontario Canada

Wellhead Mast. Installation and Operation Guide. Nanometrics Inc. Kanata, Ontario Canada Installation and Operation Guide Nanometrics Inc. Kanata, Ontario Canada 2001 2005 Nanometrics Inc. All Rights Reserved. Installation and Operation Guide The information in this document has been carefully

More information