Ford VOSS Rail Slides

Size: px
Start display at page:

Download "Ford VOSS Rail Slides"

Transcription

1 Ford VOSS Rail Slides To request CAD files, use the worksheet below and to or fax to (248) Company Phone Number Contact Contact Address City State/Zip Project Description Date needed S M 1 T Cylinder Selection/Load Bore, Narrow Carriage Bore, Wide Carriage Bore, Narrow Carriage Bore, Wide Carriage A mm B mm C mm D mm E mm F mm 080 Must be within range of i.e. for 80mm stroke, use Base "A" Switch Location (Lockout assembly located on opposite side) B Switch LH Side 1401 Piedmont, Troy, MI (248) or (800) Rev.3 6/11/14

2 1" DIA SAFETY LOCKOUT WITH TURCK # TRU LOCK #SP25Y100T X CROWNED HARD STOP W/ NAAMS ASP350 GRIND SPACER 2X THK BRAND SHS35 SERIES RAILS CUT TO STANDARD LENGTHS STANDARD WIDTH CARRIAGES E OPTION SIDE LUBE & PLUG 2X ENERTROLS SHOCKS CASE HARDENED STOP BAR NAAMS SHOCK/STOP BRACKET #AHM141 KEYED DRIVE BLOCK NC9 CLEVIS W/ LOCKNUT & ROD LOCK ALUMINIZED KEVLAR BELLOWS 3 4" BORE, 1 4 " DIA ROD NC9 TRUNNION CYL WITH ROD BOOT & EXTRA LONG MALE THREAD NAAMS TRUNNION BLOCKS KEYED TRUNNION MOUNT 1" DIA LOCKOUT RECEIVER W/ KEYED MOUNT CUT OUTS FOR CLEVIS ACCESS IN BOTH EXTEND & RETRACT POSITIONS 2X 40mm CUBE SWITCH W/ NAAMS SWITCH MOUNTING ASM5050, ASA6040, ASA9000 & UNISTRUT P3000 WELDED STEEL CUSTOM BASE FORD 4" BORE NC9 WIDE 35 RAIL SLIDE REF WELKER #S01416

3 OPTIONAL LOCKOUT ASSY 1"DIA LOCKOUT PIN W/ TURCK # LOCATED ON SIDE OPPOSITE THE SWITCH [14.96] STROKE [4.33] [3.94] [12.303] [11.319] ORDERING INFORMATION S A A M 1 T 4X M12x1.75 TAP THRU NAAMS SHOCK BRACKET RELOCATED TO MATCH USER STROKE [4.72] [9.843] 0.00 [0.000] A mm B mm C mm D mm E mm F mm 080 Must be within range of i.e. for 80mm stroke, use Base "A" 2X n10.0 P.F. THRU 12.0 [0.47] K'WAY CARRIAGE 4X n12.0 S.F. THRU 10X n13.0 DRILL THRU Switch Location (Lockout assy located on opposite side) B Switch LH Side (shown) [9.843] [11.319] [12.303] [6.89] BASE [13.780] [7.480] (BASE/2) ( SHOWN) [12.795] TYP [12.795] TYP 35 SERIES THK SHS RAILS ALUMINIZED KEVLAR BELLOWS SLIDE SHOWN IN EXTENDED POSITON BASE "A" FOR STROKES 5-100mm = [35.43] BASE "B" FOR STROKES mm = [38.58] BASE "C" FOR STROKES mm = [41.73] BASE "D" FOR STROKES mm = [44.88] BASE "E" FOR STROKES mm = [48.03] BASE "F" FOR STROKES mm = [51.18] LOCKOUT HOLES FOR n1" PIN EXTEND & RETRACT POSITION 2X ENERTROLS SHOCK 2X 40mm CUBE SWITCH TURCK # X 1 2" NPT PORTS PORTS ALWAYS LOCATED ON SIDE OPPOSITE SWITCH. FRONT HEAD PORT ACCESS THRU BURNOUT 4" BORE TRUNNION MOUNTED NC9 CYLINDER W/ CLEVIS & ROD BOOT CYLINDER STICKOUT: FOR STROKES 5-100mm = 0.0 [0.00] FOR STROKES mm = 76.0 [3.00] FOR STROKES mm = [6.22] FOR STROKES mm = [9.49] FOR STROKES mm = [12.48] FOR STROKES mm = [15.47] 52.0 [2.05] UNITS ARE MILLIMETERS (i.e.x.xxmm [x.xxx"]) DO NOT SCALE DRAWING DATE STATUS 4/30/2012 Released [25.00] [25.59] TOOL NAME BEARING COMPANY FORD 4" BORE NC9 WIDE 35 RAIL SLIDE TEMPLATE DRAWN BY DATE CHK'D BY DJH 2/9/2012 BAR FILE SCALE N/A NAME ENG S01416L [8.86]

4 ORDERING INFORMATION FOR mm STROKE [5.91] STROKE [3.94] S G A M 1 T G mm H mm J mm K mm L mm M mm N mm 580 Must be within range of i.e. for 580mm stroke, use Base "G" Switch Location (Lockout assy located on opposite side) B Switch LH Side (shown) SLIDE SHOWN IN EXTENDED POSITION FOR ALL OTHER PRODUCT AND DIMENSIONAL INFORMATION, SEE 5-500mm STROKE TEMPLATE BASE "G" FOR STROKES mm = [57.48] BASE "H" FOR STROKES mm = [60.63] BASE "J" FOR STROKES mm = [63.78] BASE "K" FOR STROKES mm = [66.93] BASE "L" FOR STROKES mm = [70.08] BASE "M" FOR STROKES mm = [73.23] BASE "N" FOR STROKES mm = [76.38] CYLINDER STICKOUT: FOR STROKES mm =482.0 [18.98] FOR STROKES mm = [21.969] FOR STROKES mm = [25.236] FOR STROKES mm = [28.228] FOR STROKES mm = [31.496] FOR STROKES mm = [34.488] FOR STROKES mm = [37.992] UNITS ARE MILLIMETERS (i.e.x.xxmm [x.xxx"]) DO NOT SCALE DRAWING DATE STATUS 4/30/2012 Released TOOL NAME BEARING COMPANY FORD 4" BORE NC9 WIDE 35 RAIL SLIDE TEMPLATE DRAWN BY DATE CHK'D BY DJH 2/9/2012 BAR FILE SCALE N/A NAME ENG S01416L02

5 2X CROWNED HARD STOP W/ NAAMS ASP350 GRIND SPACER 1" DIA SAFETY LOCKOUT WITH TURCK # TRU LOCK #SP25Y100T RAIL ALIGNMENT DOWELS 2X THK BRAND SHS35 SERIES RAILS CUT TO STANDARD LENGTHS STANDARD WIDTH CARRIAGES E OPTION SIDE LUBE & PLUG 2X ENERTROLS SHOCKS NAAMS SHOCK/STOP BRACKET #AHM141 CASE HARDENED STOP BAR KEYED DRIVE BLOCK NC9 CLEVIS W/ LOCKNUT & ROD LOCK ALUMINIZED KEVLAR BELLOWS NAAMS TRUNNION BLOCKS 6" BORE, 2" DIA ROD NC9 TRUNNION CYL WITH ROD BOOT & EXTRA LONG MALE THREAD KEYED TRUNNION MOUNT 1" DIA LOCKOUT RECEIVER W/ KEYED MOUNT CUT OUTS FOR CLEVIS ACCESS IN BOTH EXTEND & RETRACT POSITIONS 2X 40mm CUBE SWITCH W/ NAAMS SWITCH MOUNTING ASM5050, ASA6040, ASA9000 & UNISTRUT P3000 WELDED STEEL CUSTOM BASE FORD 6" BORE NC9 NARROW 35 RAIL SLIDE REF WELKER #S01417

6 OPTIONAL LOCKOUT ASSY 1"DIA LOCKOUT PIN W/ TURCK # LOCATED ON SIDE OPPOSITE THE SWITCH 4X M16x2 TAP THRU [24.41] 2X n12.0 P.F. THRU STROKE 10X n13.0 DRILL THRU [12.303] ORDERING INFORMATION S A A M 1 T [11.319] NAAMS SHOCK BRACKET RELOCATED TO MATCH USER STROKE [4.72] [9.843] 4X n12.0 S.F. THRU A mm B mm C mm D mm E mm F mm 0.00 [0.000] 080 Must be within range of i.e. for 80mm stroke, use Base "A" 12.0 [0.47] K'WAY CARRIAGE Switch Location (Lockout assy located on opposite side) B Switch LH Side (shown) [9.843] [11.319] [6.69] ALUMINIZED KEVLAR BELLOWS [12.20] [12.795] TYP 35 SERIES THK SHS RAILS [23.228] [11.614] TYP BASE (BASE/2) ( SHOWN) SLIDE SHOWN IN EXTENDED POSITON [12.795] TYP LOCKOUT HOLES FOR n1" PIN EXTEND & RETRACT POSITION [12.303] 2X ENERTROLS SHOCK APPROVED: AS NOTED: BY: DATE: 2X 40mm CUBE SWITCH TURCK # X 3 4" NPT PORTS PORTS ALWAYS LOCATED ON SIDE OPPOSITE SWITCH. FRONT HEAD PORT ACCESS THRU BURNOUT [25.00] [11.02] 6" BORE TRUNNION MOUNTED NC9 CYLINDER W/ CLEVIS & ROD BOOT BASE "A" FOR STROKES 5-100mm = [43.31] BASE "B" FOR STROKES mm = [38.58] BASE "C" FOR STROKES mm = [41.73] BASE "D" FOR STROKES mm = [44.88] BASE "E" FOR STROKES mm = [48.03] BASE "F" FOR STROKES mm = [51.18] 52.0 [2.05] CYLINDER STICKOUT: FOR STROKES 5-100mm = 6.0 [0.24] FOR STROKES mm = 82.0 [3.23] FOR STROKES mm = [6.46] FOR STROKES mm = [9.72] FOR STROKES mm = [12.72] FOR STROKES mm = [15.71] UNITS ARE MILLIMETERS (i.e.x.xxmm [x.xxx"]) DO NOT SCALE DRAWING DATE STATUS 2/9/2012 Released [25.59] TOOL NAME BEARING COMPANY FORD 6" BORE NC9 NARROW 35 RAIL SLIDE TEMPLATE DRAWN BY DATE CHK'D BY DJH 2/9/2012 BAR FILE SCALE 1:5 NAME ENG S01417L01

7 1" DIA SAFETY LOCKOUT WITH TURCK # TRU LOCK #SP25Y100T X CROWNED HARD STOP W/ NAAMS ASP350 GRIND SPACER 2X THK BRAND SHS35 SERIES RAILS CUT TO STANDARD LENGTHS STANDARD WIDTH CARRIAGES E OPTION SIDE LUBE & PLUG 2X ENERTROLS SHOCKS CASE HARDENED STOP BAR NAAMS SHOCK/STOP BRACKET #AHM141 KEYED DRIVE BLOCK NC9 CLEVIS W/ LOCKNUT & ROD LOCK ALUMINIZED KEVLAR BELLOWS NAAMS TRUNNION BLOCKS 6" BORE, 2" DIA ROD NC9 TRUNNION CYL WITH ROD BOOT & EXTRA LONG MALE THREAD KEYED TRUNNION MOUNT 1" DIA LOCKOUT RECEIVER W/ KEYED MOUNT CUT OUTS FOR CLEVIS ACCESS IN BOTH EXTEND & RETRACT POSITIONS WELDED STEEL CUSTOM BASE 2X 40mm CUBE SWITCH W/ NAAMS SWITCH MOUNTING ASM5050, ASA6040, ASA9000 & UNISTRUT P3000 FORD 6" BORE NC9 WIDE 35 RAIL SLIDE REF WELKER #S01418

8 OPTION LOCKOUT ASSY 1"DIA LOCKOUT PIN W/ TURCK # LOCATED ON SIDE OPPOSITE THE SWITCH 4X M16x2 TAP THRU 2X n12.0 P.F. THRU 10X n13.0 DRILL THRU [24.41] STROKE 4X n12.0 S.F. THRU [16.240] [15.256] [13.780] ORDERING INFORMATION S A A M 1 T NAAMS SHOCK BRACKET RELOCATED TO MATCH USER STROKE [4.72] 0.00 [0.000] A mm B mm C mm D mm E mm F mm 080 Must be within range of i.e. for 80mm stroke, use Base "A" 12.0 [0.47] K'WAY [11.614] TYP CARRIAGE SLIDE SHOWN IN EXTENDED POSITON [13.780] [15.256] [16.240] Switch Location (Lockout assy located on opposite side) B Switch LH Side (shown) APPROVED: AS NOTED: BY: DATE: [6.69] ALUMINIZED KEVLAR BELLOWS [12.20] [12.795] 35 SERIES THK SHS RAILS [23.228] BASE (BASE/2) ( SHOWN) [12.795] 2X ENERTROLS SHOCK 2X 40mm CUBE SWITCH TURCK # [32.87] [11.02] 2X 3 4" NPT PORTS PORTS ALWAYS LOCATED ON SIDE OPPOSITE SWITCH. FRONT HEAD PORT ACCESS THRU BURNOUT 6" BORE TRUNNION MOUNTED NC9 CYLINDER W/ CLEVIS & ROD BOOT BASE "A" FOR STROKES 5-100mm = [43.31] BASE "B" FOR STROKES mm = [38.58] BASE "C" FOR STROKES mm = [41.73] BASE "D" FOR STROKES mm = [44.88] BASE "E" FOR STROKES mm = [48.03] BASE "F" FOR STROKES mm = [51.18] LOCKOUT HOLES FOR n1" PIN EXTEND & RETRACT POSITION 52.0 [2.05] CYLINDER STICKOUT: FOR STROKES 5-100mm = 6.0 [0.24] FOR STROKES mm = 82.0 [3.23] FOR STROKES mm = [6.46] FOR STROKES mm = [9.72] FOR STROKES mm = [12.72] FOR STROKES mm = [15.71] UNITS ARE MILLIMETERS (i.e.x.xxmm [x.xxx"]) DO NOT SCALE DRAWING DATE STATUS 2/9/2012 Released [33.46] TOOL NAME BEARING COMPANY FORD 6" BORE NC9 WIDE 35 RAIL SLIDE TEMPLATE DRAWN BY DATE CHK'D BY DJH 2/9/2012 BAR FILE SCALE N/A NAME ENG S01418L01

9 RAIL ALIGNMENT DOWELS 2X CROWNED HARD STOP W/ NAAMS ASP350 GRIND SPACER 1" DIA SAFETY LOCKOUT WITH TURCK # TRU LOCK #SP25Y100T HARDENED STOP BLOCK 2X ENERTROLS SHOCKS 2X THK BRAND SHS35 SERIES RAILS CUT TO STANDARD LENGTHS STANDARD WIDTH CARRIAGES E OPTION SIDE LUBE & PLUG NAAMS SHOCK/STOP BRACKET #AHM141 CASE HARDENED STOP BAR KEYED DRIVE BLOCK NC9 CLEVIS W/ LOCKNUT & ROD LOCK ALUMINIZED KEVLAR BELLOWS 3 4" BORE, 1 4 " DIA ROD NC9 TRUNNION CYL WITH ROD BOOT & EXTRA LONG MALE THREAD NAAMS TRUNNION BLOCKS KEYED TRUNNION MOUNT 1" DIA LOCKOUT RECEIVER W/ KEYED MOUNT CUT OUTS FOR CLEVIS ACCESS IN BOTH EXTEND & RETRACT POSITIONS 2X 40mm CUBE SWITCH W/ NAAMS SWITCH MOUNTING ASM5050, ASA6040, ASA9000 & UNISTRUT P3000 WELDED STEEL CUSTOM BASE FORD 4" BORE NC9 NARROW 35 RAIL SLIDE REF WELKER #S01430

10 OPTIONAL LOCKOUT ASSY 1"DIA LOCKOUT PIN W/ TURCK # LOCATED ON SIDE OPPOSITE THE SWITCH 4X M12x1.75 TAP THRU [14.96] 2X n10.0 P.F. THRU [4.33] [3.94] STROKE 10X n13.0 DRILL THRU 4X n12.0 S.F. THRU ORDERING INFORMATION FOR 5-500mm STROKE S A A M 1 T [8.366] NAAMS SHOCK BRACKET RELOCATED TO MATCH USER STROKE 12.0 [0.47] K'WAY [4.72] [7.382] [5.906] 0.00 [0.000] A mm B mm C mm D mm E mm F mm 080 Must be within range of i.e. for 80mm stroke, use Base "A" Switch Location (Lockout assy located on opposite side) B Switch LH Side (shown) CARRIAGE [5.906] [7.382] [8.366] ALUMINIZED KEVLAR BELLOWS [12.795] TYP 35 SERIES THK SHS RAILS [6.89] [13.780] BASE [7.480] SLIDE SHOWN IN EXTENDED POSITON (BASE/2) ( SHOWN) [12.795] TYP LOCKOUT HOLES FOR n1" PIN EXTEND & RETRACT POSITION 2X ENERTROLS SHOCK 2X 40mm CUBE SWITCH TURCK # [17.13] 2X 1 2" NPT PORTS PORTS ALWAYS LOCATED ON SIDE OPPOSITE SWITCH. FRONT HEAD PORT ACCESS THRU BURNOUT 4" BORE TRUNNION MOUNTED NC9 CYLINDER W/ CLEVIS & ROD BOOT 47.0 [1.85] [8.86] BASE "A" FOR STROKES 5-100mm = [35.43] BASE "B" FOR STROKES mm = [38.58] BASE "C" FOR STROKES mm = [41.73] BASE "D" FOR STROKES mm = [44.88] BASE "E" FOR STROKES mm = [48.03] BASE "F" FOR STROKES mm = [51.18] CYLINDER STICKOUT: FOR STROKES 5-100mm = 0.0 [0.00] FOR STROKES mm = 76.0 [3.00] FOR STROKES mm = [6.22] FOR STROKES mm = [9.49] FOR STROKES mm = [12.48] FOR STROKES mm = [15.47] UNITS ARE MILLIMETERS (i.e.x.xxmm [x.xxx"]) DO NOT SCALE DRAWING DATE STATUS 4/30/2012 Released [17.72] TOOL NAME BEARING COMPANY FORD 4" BORE NC9 NARROW 35 RAIL SLIDE TEMPLATE DRAWN BY DATE CHK'D BY DJH 2/9/2012 BAR FILE SCALE 1:5 NAME ENG S01430L01

11 150.0 [5.91] STROKE [3.94] G mm H mm J mm K mm L mm M mm N mm ORDERING INFORMATION FOR mm STROKE S G A M 1 T 580 Must be within range of i.e. for 580mm stroke, use Base "G" SLIDE SHOWN IN EXTENDED POSITION Switch Location (Lockout assy located on opposite side) B Switch LH Side (shown) FOR ALL OTHER PRODUCT AND DIMENSIONAL INFORMATION, SEE 5-500mm STROKE TEMPLATE BASE "G" FOR STROKES mm = [57.48] BASE "H" FOR STROKES mm = [60.63] BASE "J" FOR STROKES mm = [63.78] BASE "K" FOR STROKES mm = [66.93] BASE "L" FOR STROKES mm = [70.08] BASE "M" FOR STROKES mm = [73.23] BASE "N" FOR STROKES mm = [76.38] CYLINDER STICKOUT: FOR STROKES mm = [18.98] FOR STROKES mm = [21.969] FOR STROKES mm = [25.236] FOR STROKES mm = [28.228] FOR STROKES mm = [31.496] FOR STROKES mm = [34.488] FOR STROKES mm = [37.992] UNITS ARE MILLIMETERS (i.e.x.xxmm [x.xxx"]) DO NOT SCALE DRAWING DATE STATUS 4/30/2012 Released TOOL NAME BEARING COMPANY FORD 4" BORE NC9 NARROW 35 RAIL SLIDE TEMPLATE DRAWN BY DATE CHK'D BY DJH 2/9/2012 BAR FILE SCALE 1:5 NAME ENG S01430L02

12

HEAVY DUTY PNEUMATIC

HEAVY DUTY PNEUMATIC HEAVY DUTY PNEUMATIC Series A4 MEDIUM DUTY HYDRAULIC Series H4 PERMANENTLY LUBRICATED HEAVY DUTY PNEUMATIC Series L4 586.778.7680 SERIES A4/L4/H4 39 A4/L4/H4 FEATURES 1 1 9 9 12 8 7 5 12 3 13 4 10 2 11

More information

SAILTEC, INC CONGER COURT, OSHKOSH, WI USA

SAILTEC, INC CONGER COURT, OSHKOSH, WI USA OK to make this valve hand tight. Pin Mount Style Integral lies 4-5 Degrees above Horizontal. If you store your Hunter "bow down" you will get air-lock in the Integral. Slot Mount Style Pump Body "Down"

More information

Assembly Instructions for the Rolling Harrow and Reel Turbo-Till 6/26/03

Assembly Instructions for the Rolling Harrow and Reel Turbo-Till 6/26/03 Assembly Instructions for the Rolling Harrow and Reel Turbo-Till 6/26/03 Your initial action is to locate the correct drag frame [(61) 589-107H through 589-116H]. Bolt the drag frame to the rear drag plates

More information

Assembly Instructions for the Rolling Harrow and Board Turbo-Till 6/26/03

Assembly Instructions for the Rolling Harrow and Board Turbo-Till 6/26/03 Assembly Instructions for the Rolling Harrow and Board Turbo-Till 6/26/03 Your initial action is to locate the correct drag frame [(61) 589-107H through 589-116H]. Bolt the drag frame to the rear drag

More information

HL Slides. Transfer and Lift Systems HYDRO-LINE, INC.

HL Slides. Transfer and Lift Systems HYDRO-LINE, INC. ROCKFORD, IL HL Slides Transfer and Lift Systems HYDRO-LINE, INC. PATENTS PENDING OR PATENTED 5263402 5255591 All Rights Reserved. Table of Contents Thank you for using Hydro-Line... We would like to take

More information

Fairlane & Meteor Instruction Package RC-114K. Rear Coilover Suspension Kit NOTE...

Fairlane & Meteor Instruction Package RC-114K. Rear Coilover Suspension Kit NOTE... ROD & CUSTOM Motorsports INCORPORATED 1962-1965 Fairlane & Meteor Instruction Package RC-114K Rear Coilover Suspension Kit NOTE... PLEASE READ ALL INSTRUCTIONS INCLUDED WITHIN THIS PACKAGE. IF AFTER READING

More information

REPAIR PART NUMBER NUMBER DESCRIPTION 0137 ELE 0136 ELE 12 VOLT SOLENOID

REPAIR PART NUMBER NUMBER DESCRIPTION 0137 ELE 0136 ELE 12 VOLT SOLENOID PART REPAIR PART NUMBER NUMBER DESCRIPTION 0137 ELE 0136 ELE 12 VOLT SOLENOID 0203 WHL 0250 WHL WHEEL HUB 0251 WHL AXLE 0252 WHL DUST CAPS 0253 WHL TIRE - 210 SP 0204 WHL 0211 WHL TIRE & WHEEL - SP 0250

More information

AutoDrill s OUTSTANDING FEATURES

AutoDrill s OUTSTANDING FEATURES PRODUCTION DRILLING & TAPPING SOLUTIONS Reduce Your Costs and Increase Your Production The Affordable, Powerful, Compact Solution AutoDrill s OUTSTANDING FEATURES Self Feeding with Air or Oil Thrust Capacity

More information

Installation Guide, MPower Echelon Console

Installation Guide, MPower Echelon Console Installation Guide, MPower Echelon Console AC Performance, AC Sport and AC Performance Plus Schwinn Echelon Console (External Routing) 1. Install batteries to console. Mount the console to the bike. 2.

More information

INSTALLATION INSTRUCTIONS: SCTB1600

INSTALLATION INSTRUCTIONS: SCTB1600 INSTALLATION INSTRUCTIONS: SCTB1600 DESCRIPTION: BOLLARD, 1600 DWG: INSTALL_SCTB1600 REV: M01 BASE TYPE B1 DIRECT BURIAL - PG. 6: BOLLARD IS PERMANENT, IT IS DIRECTLY BURIED INTO CONCRETE BASE TYPE B2

More information

Hydraulic and Electrical Service Loop Pins

Hydraulic and Electrical Service Loop Pins Product Bulletin # TDS-164 Hydraulic and Electrical Service Loop Pins Affected Units All Canrig top drive models with a hydraulic and electrical service loop installed. Service Loop Pins The ends of the

More information

Key No. Description Part No.

Key No. Description Part No. ENGINE ASSEMBLY 45 319042 10 (SEE ENGINE MANUAL) ENGINE 12 SCREW, 5/16 18 710024 13 WASHER 120638 41 GUIDE, ROD BELT 3949 42 PLASTIC WASHER 6711 43 WASHER 120638 44 SCREW, 5/16 24X 1.00 910828 45 SPACER

More information

Index Table. Model 794. Installation, Operating and Maintenance Instructions

Index Table. Model 794. Installation, Operating and Maintenance Instructions CLOCKWISE MANUAL MAKING INTO CCW TABLE Index Table Model 794 Installation, Operating and Maintenance Instructions Black & Webster Products Division 545 Hupp Ave. P.O. Box 831, Jackson, Michigan 49204 2009

More information

Parts Manual. Scraper Hitches PH:

Parts Manual. Scraper Hitches PH: Parts Manual Scraper Hitches 12-18 1 Table of Contents A123299 Swivel Hitch 3 A1063527 Super Swivel Hitch 4 A125056 Yoke Hitch 5 A125057 Super Capacity Hitch 6 A125223 MDU Hitch 7 A123224 360 Swivel Hitch

More information

GROUP 9 BOOM 1144 EXTENDO PARTS MANUAL

GROUP 9 BOOM 1144 EXTENDO PARTS MANUAL GROUP 9 BOOM BOOM PIVOT/LIFT CYLINDER INSTALLATION, FL-13035... 9-2 BOOM ASSEMBLY, FL-13614... 9-4 LARGE BOOM ASSEMBLY, FL-13626... 9-8 LARGE BOOM W/BUSHINGS, FL-13627... 9-12 MIDDLE BOOM ASSY, FL-11025...

More information

a division of Enviro Safety Products

a division of Enviro Safety Products www.minutemanvac.com, a division of Enviro Safety Products.800.637.6606 Chassis 3 4 5 3 4 6 7 8 5 0 0 6 8 0 7 4 3 5 6 7 E 7e www.minutemanvac.com, a division of Enviro Safety Products.800.637.6606 Page

More information

E Manual Self tacking system 30

E Manual Self tacking system 30 597-205-E 2015-12-09 Manual Self tacking system 30 1 Self tacking system 30, 443-200-10 A self-tacking jib makes life on board a lot easier, in particular for shorthanded crews. The jib sheet is led to

More information

1650EXLT, ,

1650EXLT, , 1650EXLT, 96193008901, 2012-10 "CHASSIS, ENGINE & PULLEYS" - 000 00 00-00 W/O DESCRIPTION 1 B&S 21M307-0135-F1 FOR SERVICE & PARTS 1-800-233-3723 1 532 42 92-03 FRAME 1 2 532 15 04-06 BOLT 1 3 532 42 88-67

More information

RZR 900 Hitch Mount Plate

RZR 900 Hitch Mount Plate RZR 900 Hitch Mount Plate Polaris RZR 900 2015+ Part #: 5801119 Rev. 031017 491 W. Garfield Ave., Coldwater, MI 49036. Phone: 517-278-7768 E-mail: sales-rtpro@sporttruckusainc.com SAFETY WARNING RT Pro

More information

ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 1 of 52 A-ARM, FLOOR PANEL, AND BUMPER ASSEMBLY

ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 1 of 52 A-ARM, FLOOR PANEL, AND BUMPER ASSEMBLY 2004 ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 1 of 52 A-ARM, FLOOR PANEL, AND BUMPER ASSEMBLY 2004 ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 2 of 52 A-ARM, FLOOR PANEL, AND BUMPER

More information

! CAUTION! ! WARNING! General Information

! CAUTION! ! WARNING! General Information Great Plains Mfg., Inc. Installation Instructions Used with: 2SF24, 24-Foot Two-Section Drill General Information Two-Section, Hydraulic Folding Marker 2SF30, 30-Foot Two-Section Drill 2SBM30, 30-Foot

More information

2.4M Viking Swing Basket Swing

2.4M Viking Swing Basket Swing .M Viking Swing Basket Swing PROD. CODE SIZE AGE RANGE F/ FALL HEIGHT HEAVIEST PART TOTAL WEIGHT 75x75x150 5 to Adult 1.5 Metres Approx 6Kg Approx 198Kg SPECIFICATION Solid steel components to EN 10087:1998

More information

Replaces Lesco 300 & 500 Parts

Replaces Lesco 300 & 500 Parts Replaces Lesco 300 & 500 Parts ItemNo R&R PartNo PartNo Description Req. Qty Price R&R Reels Available, Lifetime Guaranteed 1 R502871 020800 R&R Reel, 9 Blade, Fits 300 1 32,100 1 R502871H R&R Only R&R

More information

PVQ 13 A2 R SE 1 S 20 C-11 D

PVQ 13 A2 R SE 1 S 20 C-11 D PVQ - Variable Displacement Piston Pump PVQ 13 A2 R SE 1 S 2 C-11 D 1 2 3 4 6 7 8 9 1 1 Model Series PVQ Inline Piston Pump Variable Volume Quiet Series 4 Rotation Viewed from shaft end R Right hand, standard

More information

Bearing Size (A11) Lock Washer (A9) Lock Nut (A10) SCREW NUMBER Part S1 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 Number

Bearing Size (A11) Lock Washer (A9) Lock Nut (A10) SCREW NUMBER Part S1 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 Number BMR BARNG S The BMR series bearing mounts are SMPL RADAL supports utilizing shielded Radial ball bearings for supporting radial load components. These bearing mounts are NOT intended to support axial load

More information

MASTER TRUING STAND TS-3. Optional Dial indicator set with brackets Dial indicator bracket set only

MASTER TRUING STAND TS-3. Optional Dial indicator set with brackets Dial indicator bracket set only MASTER TRUING STAND TS-3 3 2 1 3 8 9 4 10 7 6 5 12 13 Optional 1555-1 Dial indicator set with brackets 1556-1 Dial indicator bracket set only 49 11 16 14 15 48 32 31 37 38 20 19 17 18 34 39 21 36 22 33

More information

PTR Series Track Roller Assembly Plain/Cylindrical Stud Type Concentric Ball & Tapered Roller Bearings

PTR Series Track Roller Assembly Plain/Cylindrical Stud Type Concentric Ball & Tapered Roller Bearings PTR Series Assembly A B C D F FL H SD SL T Width Hex Width + PTR-1.00 1.000 0.75 0.437 1.00 7/16-20 0.50 3/16 0.5 0.03 0.78 PTR-1.125 1.125 0.75 0.437 1.00 7/16-20 0.50 3/16 0.5 0.03 0.78 PTR-1.25 1.250

More information

S E R V I C E I IPL, LR10 36, LR Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar

S E R V I C E I IPL, LR10 36, LR Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar S E R V I C E I9400033 IPL, LR10 36, 1994-01 LR10 36 Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar 1 874 76 04-12 Bolt Fin Hex 1/4-20 x 3/4 8 873 68 04-00 Locknot W/lnsert

More information

WORLD CHAMPION. SMALL BORE RIFLE.22 l.r. MANUAL. Technical Innovations

WORLD CHAMPION. SMALL BORE RIFLE.22 l.r. MANUAL. Technical Innovations SMALL BORE RIFLE.22 l.r. MANUAL Technical Innovations Technical Innovations -General information Page 2 -Bedding Page 3 -Three locking lugs Page 4 -Safety / dry fire switch Page 4 -Firing pin Page 4 -Firing

More information

Parts & Installation Instructions SV & SV 2 8.5, 9.5 & 10.5 and SVLD 7.5 Snow Plow

Parts & Installation Instructions SV & SV 2 8.5, 9.5 & 10.5 and SVLD 7.5 Snow Plow Form -0 R September 0 Parts & Installation Instructions SV & SV.,. &. and SVLD. Snow Plow Item Part No. Part No. Part No. Part No. Part No. Part No. Qty. Description SVLD. SV. SV. SV. SV. SV. Moldboard

More information

K0709 Quick-fit couplings

K0709 Quick-fit couplings Joints 1067 K0709 Quick-fit couplings with radial offset compensation external thread D1 SW SW1 application example: X max. D D 3 4 internal thread SW 3 4 2 SW1 D D Coupling part and claw in steel. Nut

More information

Invacare Top End Parts Catalog

Invacare Top End Parts Catalog Invacare Top End Parts Catalog T Titanium Top End Frames / Standard Parts Pre- July 2009 20 22 0 2 Pre- July 2009 9 2 2 Pre- July 2009 9 2 Titanium Head Tube Assembly see Casters / Forks on pg. 4 4 4 see

More information

Rev M XLT Pro and XLT Jr Parts Book Page 1 of 6 Top End

Rev M XLT Pro and XLT Jr Parts Book Page 1 of 6 Top End 17 1181381 Rev M. 2017.02.21 XLT Pro and XLT Jr Parts Book Page 1 of 6 Top End (800) 532-8677 (727) 522-8677 fax: (727) 522-1007 XLT & XLT Jr: Fork Assembly Date: PO#: SO#: ITEM PER BIKE DESCRIPTION 1

More information

APAS - 72 Parts Manual

APAS - 72 Parts Manual VERSION HISTORY The table below summarizes the history of this document as it is published onto the company website(s). It identifies the version, date of issue and revisions and changes. VERSION DATE

More information

Installation Instructions - Electric Steel Drive Systems for Arm Sets to ,

Installation Instructions - Electric Steel Drive Systems for Arm Sets to , Installation Instructions - Electric Steel Drive Systems for Arm Sets to 22 208-025, 209-025 NB /0/ 607-0029 404 N. Marshall Ave. El Cajon CA. 92020 For technical support call us at (800) 368-3075 Step.

More information

Replaces Lesco 300 & 500 Parts Cutting Unit

Replaces Lesco 300 & 500 Parts Cutting Unit Replaces Lesco 300 & 500 Parts 3A 11 10 10 11 17 3 1 15 2 13 1 20 1 20 1 21 2 2 22 1B 30 1A 10 14 31 25 23 24 10 4 27 23 25 26 14 24 10 13A 5 5A 4A 16 0 R&R Reels Available, Lifetime Guaranteed 1 R50271

More information

Reproduction. Not for 27" & 29" TWO STAGE INTERMEDIATE SNOWTHROWERS Parts Manual for M1227E M1227EX M1529E

Reproduction. Not for 27 & 29 TWO STAGE INTERMEDIATE SNOWTHROWERS Parts Manual for M1227E M1227EX M1529E Parts Manual for 27" & 29" TWO STAGE INTERMEDIATE SNOWTHROWERS 2011 Model No. Description 1696001 M1227E 1696002 M1227EX 1696003 M1529E Briggs & Stratton Yard Power Products Group 535 Macon Road McDonough,

More information

Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW. Tel +44 (0)

Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW. Tel +44 (0) Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW Tel +44 (0)1254 615100 www.allspeeds.co.uk HOSE/UMBILICAL CUTTER HCV100 PRODUCT CODE No. 980292 INSTRUCTIONS

More information

Rev S Terminator Parts Book Page 1 of 14 Top E nd

Rev S Terminator Parts Book Page 1 of 14 Top E nd 1181387 Rev S.2017.01.17 Terminator Parts Book Page 1 of 14 Top E nd 1181387 Rev S.2017.01.17 Terminator Parts Book Page 2 of 14 Top E nd Terminator: Frame Assembly PER CHAIR Frame Only: Aluminum for Folding

More information

Foos 300 Assembly Instructions

Foos 300 Assembly Instructions Foos 300 Assembly Instructions Thank you for purchasing a Shelti product. All of us at Shelti want you to be completely satisfied with your Foos game, so feel free to contact us for help with the assembly

More information

ZIPP VUMAQUAD INSTALLATION INSTRUCTIONS

ZIPP VUMAQUAD INSTALLATION INSTRUCTIONS ZIPP VUMAQUAD INSTALLATION INSTRUCTIONS CAUTION All Zipp Crank and BB products should be installed by a professional bicycle mechanic using the appropriate tools. Zipp assumes no responsibility for damages

More information

UCA2 Series. Bore size: 10, 16, 25, 32. UCA2 UCA2-L (with switch) Double acting Compressed air to 60 (no freezing)

UCA2 Series. Bore size: 10, 16, 25, 32. UCA2 UCA2-L (with switch) Double acting Compressed air to 60 (no freezing) SCP* CMK CM SC CKV C/OV CT MDC SMD JSK/M U STR SRL SM RCC Specifications Descriptions Bore size mm ctuation Working fluid Max. working pressure MPa Min. working pressure MPa Withstanding pressure MPa mbient

More information

Detroit Speed, Inc. Rear Coilover Conversion Kit Camaro/Firebird P/N: &

Detroit Speed, Inc. Rear Coilover Conversion Kit Camaro/Firebird P/N: & Detroit Speed, Inc. Rear Coilover Conversion Kit 1982-02 Camaro/Firebird P/N: 042440 & 042441 The Detroit Speed Inc., Rear Coilover Conversion Kit allows the latest in coilover spring/shock technology

More information

How to order: Please prefix the mbo part number or description with R239- example: R /014

How to order: Please prefix the mbo part number or description with R239- example: R /014 Clevis joints similar to DIN 71751, with folding spring bolt mbo stard AFKB Clevis joint mbo stard AFKB assembled, Clevis mbo stard 02 03_01/page 23 03_02/page 24) Folding spring bolt mbo stard 01 02_01/page

More information

MID-CUT AND FRONT CUT UNITS

MID-CUT AND FRONT CUT UNITS MID-CUT AND FRONT CUT UNITS Instructional / Parts Manual Part Number: January 00 08 ( 0 & 0 ) & Adapter Kits ( 07, 08, 09, 060, 06 & 06) Table of Contents PROWLER GRASS CATCHER TWO PACKAGED ITEMS LIST

More information

A photo gallery of jump construction can be found at;-

A photo gallery of jump construction can be found at;- The Heirisson Island Tournament Water Ski Club jump is situated on the Swan River, in the heart of Perth. The jump was wholly constructed by volunteer members of the Heirisson Island Tournament Water Ski

More information

Rocky Mountain Instinct / Pipeline Alloy Frame Assembly Guide. Date: April 7, 2017

Rocky Mountain Instinct / Pipeline Alloy Frame Assembly Guide. Date: April 7, 2017 Rocky Mountain Instinct / Pipeline Alloy Frame Assembly Guide Date: April 7, 2017 1 Table of Contents Front Triangle Preparation... 4 Parts Needed... 4 Instructions... 4 Chain Stay Preparation... 6 Parts

More information

Parts Manual STRIKER Striker 2840 Parts List - PN Printed in USA 03/18/08

Parts Manual STRIKER Striker 2840 Parts List - PN Printed in USA 03/18/08 Parts Manual STRIKER 2840 Striker 2840 Parts List - PN 238155 - Printed in USA 03/18/08 Standard Parts Recommended General Wear Parts Ref No Part Description Qty Part No 1 Squeegee Hose Assembly

More information

Tread Brake Assembly Instructions

Tread Brake Assembly Instructions reated: 9/06/202, Revision: 2/20/204 Tread rake ssembly Instructions Table of ontents: Lower rake omponents..2-4 able rake ssembly: rake Handle omponents..5-7 able ssembly....8 Tee Handle rake ssembly...9-0

More information

Rev J Terminator Parts Book Page 1 of 15 Top End

Rev J Terminator Parts Book Page 1 of 15 Top End 1181387 Rev J.2016.03.22 Terminator Parts Book Page 1 of 15 Top End 1181387 Rev J.2016.03.22 Terminator Parts Book Page 2 of 15 Top End (800) 532-8677 (727) 522-8677 fax: (727) 522-1007 Terminator: Frame

More information

SLICER KNIVES and STONE SETS

SLICER KNIVES and STONE SETS 146 SLICER KNIVES and STONE SETS BERKEL KNIVES and MATCHING STONE SETS BIZERBA KNIVES and MATCHING STONE SETS FITS: SLICER KNIFE STONE SET FITS: SLICER KNIFE STONE SET 807 808 817 818 909 919 2340 2350

More information

SpeciÞcations. Engine Dimensions Dimensions in millimeters. Inch equivalents shown in [].

SpeciÞcations. Engine Dimensions Dimensions in millimeters. Inch equivalents shown in []. SpeciÞcations Engine Dimensions Dimensions in millimeters. Inch equivalents shown in []. Ê ßÔ Ê ÛÝ Ñ Ê Û ÎÊ Û É 5 ENGINE IDENTIFICATION NUMBERS Kohler engine identiþcation numbers (model, speciþcation

More information

ROLLER SLIDE BALL BEARING

ROLLER SLIDE BALL BEARING ROLLER SLIDE BALL BEARING ROLLER SLIDE SYSTEM BALL BEARING SLIDE SYSTEM Standard slides and ball bearing slides offering a variety of top quality movement systems. www.grassusa.com Roller slides: Tried-and-tested

More information

DI-DRO ADVANCED FORMING SYSTEMS

DI-DRO ADVANCED FORMING SYSTEMS DI-DRO ADVANCED FORMING SYSTEMS WE PARTNER WITH YOU We partner with you to provide force-generating products and solutions to lower your costs and increase your productivity in the forming of manufactured

More information

PTRE Series Track Roller Assembly Plain/Cylindrical Stud Type Eccentric Ball & Tapered Roller Bearings

PTRE Series Track Roller Assembly Plain/Cylindrical Stud Type Eccentric Ball & Tapered Roller Bearings PTRE Series Assembly A B C D ED EL EO F FL H SD SL T -.001 Width Dia -.002 Offset Hex Shld Width + PTRE-1.00 1.000 0.75 0.437 1.00 0.625 0.48 0.03 7/16-20 0.52 3/16 0.7 0.03 0.78 PTRE-1.125 1.125 0.75

More information

Part No (Low Changeover) Part No (High Changeover) Part No (High Changeover)

Part No (Low Changeover) Part No (High Changeover) Part No (High Changeover) ELX-S TM UNIT 60% 665020 (Low Changeover) 305274 (High Changeover) 305305 (High Changeover) IMPORTANT: This catalog is published as an aid in identifying the detail parts that make up this complete device.

More information

Replaces Ryan Sod Cutter Parts

Replaces Ryan Sod Cutter Parts Replaces Ryan Sod Cutter Parts O.E.M 1 R250356 R&R Only R&R 12" Sod Cutter Blade, 1/4" x 2 1/2" 5,900 1 R250359 R&R Only R&R 15" Sod Cutter Blade, 1/4" x 2 1/2" 5,900 1 R250358 R&R Only R&R 16" Sod Cutter

More information

Rev. F, July 2014 Page 1 of 6 Top End

Rev. F, July 2014 Page 1 of 6 Top End 17 Rev. F, July 2014 Page 1 of 6 Top End (800) 532-8677 (727) 522-8677 fax: (727) 522-1007 XLT & XLT Jr: Fork Assembly Date: PO#: SO#: 1 1054197 1 Fork, XLT 1056850 1 Fork, XLT Jr 2 1054195 1 Footrest,

More information

I Illustrated Parts List 650 CRT B. Tiller. Repair Parts Manual

I Illustrated Parts List 650 CRT B. Tiller. Repair Parts Manual Illustrated Parts List 2001-11 I0102042 650 CRT B 954328030 Repair Parts Manual Tiller HANDLE ASSEMBLY 1 532 18 06-34 Control, Throttle 2 532 00 92-66 Grip, Handle 4 532 15 92-28 Bar Assembly, Control

More information

Air Saving Valve. Pressure Valve Flow Valve

Air Saving Valve. Pressure Valve Flow Valve Air Saving Valve Series Series Pressure Valve Flow Valve % reduction in air consumption Cuts air consumption by operating the return stroke at a reduced pressure. valve Pressure Air consumption reduction

More information

SKI SPECIFICATIONS INSTALLATION, MAINTENANCE, SERVICE INSTRUCTIONS & ILLUSTRATED PARTS LIST

SKI SPECIFICATIONS INSTALLATION, MAINTENANCE, SERVICE INSTRUCTIONS & ILLUSTRATED PARTS LIST SKI SPECIFICATIONS INSTALLATION, MAINTENANCE, SERVICE INSTRUCTIONS & ILLUSTRATED PARTS LIST AIRGLAS MANUAL NO. L 44000-105 FOR SKI SERIAL NO. S 1 THRU 1000 AIRGLAS MODEL L 44000-11 FSN 1630-912-3166 SKI

More information

Assembly Instructions

Assembly Instructions CS-B-FM Assembly Instructions Thank you for purchasing a Shelti product. All of us at Shelti want you to be completely satisfied with your Pro Foos game, so feel free to contact us for help with the assembly

More information

Important Note: Tighten lock nuts so the support tubes still swing freely see figure 2. There must be 1 2 threads of bolt past end of lock nuts.

Important Note: Tighten lock nuts so the support tubes still swing freely see figure 2. There must be 1 2 threads of bolt past end of lock nuts. Kit Contents: DESCRIPTION QTY. DESCRIPTION QTY. 2 Shank Assembly 1 Support Tube Assembly 1 Side Tube - Short 2 1-1/4 Shank 1 Center Tube - Long 1 3/8-16 x 2.0 Carriage Bolt 2 5/16-18 x 2.25 Carriage Bolt

More information

BARRIER OFFSET 0" A 6" 6" A 12" 12" A 26" A 26" 3A OR 4A L OR S * ** L OR S L OR S

BARRIER OFFSET 0 A 6 6 A 12 12 A 26 A 26 3A OR 4A L OR S * ** L OR S L OR S ACCEPTABLE (TCB) TYPES AND ANCHORING DETAILS BASED ON UNDERLYING SURFACE TYPE AND BARRIER OFFSET FROM DROP-OFF BARRIER OFFSET UNDERLYING SURFACE 0" A 6" 6" A 12" 12" A 26" A 26" TCB TYPE DETAIL TCB TYPE

More information

OUTER RACE SHIM SPACERS METRIC OUTER RACE SHIM SPACERS. All Dimensions in Millimeters. Material:300 Series Stainless Steel

OUTER RACE SHIM SPACERS METRIC OUTER RACE SHIM SPACERS. All Dimensions in Millimeters. Material:300 Series Stainless Steel OUTER RACE SHIM SPACERS Material:300 Series Stainless Steel METRIC OUTER RACE SHIM SPACERS All Dimensions in Millimeters Material:300 Series Stainless Steel 6-16 INNER RACE SHAFT SPACERS 3 /32" To 1 /2"

More information

OWNER'S MANUAL LOCK-N-LOAD BULLET FEEDER (PISTOL)

OWNER'S MANUAL LOCK-N-LOAD BULLET FEEDER (PISTOL) OWNER'S MANUAL LOCK-N-LOAD BULLET FEEDER (PISTOL) Table of Contents ASSEMBLY ASSEMBLY Pistol Bullet Feeder... Page 3 CHANGE-OVERS The Hornady Lock-N-Load Pistol Bullet Feeder is capable of feeding most

More information

6146XX-X OPEN STYLE HOSE REELS

6146XX-X OPEN STYLE HOSE REELS OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION & MAINTENANCE 6146XX-XXX OPEN STYLE HOSE REELS LOW, MEDIUM & HIGH PRESSURE (FOR AIR, WATER & PETROLEUM PRODUCTS) 6146XX-X RELEASED: 2-5-90 REVISED:

More information

Quad Cuff Handle kit (Pr) - Delrin Only-

Quad Cuff Handle kit (Pr) - Delrin Only- Quad Cuff Handle kit (Pr) - Delrin Only- Page 2 = Fork Assembly, XLT & XLT Jr. Page 3 = Fork Assembly, XLT Pro Page 4 = Frame Assembly Page 5 = Wheels Assembly, XLT & XLT Jr. Page 6 = Accessories Rev E.

More information

Peck Drills Accessories

Peck Drills Accessories Fixed Aircraft Nosepieces for HT1, HT2 and HT3 Nosepiece part number includes Guard and F571 (.125 ) NPT) Plug.125 NPT Length Type Stroke Length Guard TB Series Tool Mount 537259 Fluid Inducer (Alum.)

More information

G SERIES METRIC MACHINE SCREW ACTUATOR

G SERIES METRIC MACHINE SCREW ACTUATOR G SERIES METRIC MACHINE SCREW ACTUATOR kn to 0kN Duff-Norton metric actuators are manufactured to the same high quality standards and include all the same features and benefits as the standard line of

More information

TONS! powerteam.com HEAVY LIFT CYLINDERS

TONS! powerteam.com HEAVY LIFT CYLINDERS NEW DESIGNS TONS! powerteam.com HEAVY LIFT CYLINDERS THE Precise MOST Positioning COMPREHENSIVE & ControlRANGE OF HIGH in a Responsive PRESSURE Package HEAVY LIFT CYLINDERS R_G SINGLE & DOUBLE ACTING,

More information

Specifications Testing & Adjusting Disassembly & Assembly

Specifications Testing & Adjusting Disassembly & Assembly SB4191E00 Jul. 2005 Specifications Testing & Adjusting Supplement for Quad Lift Mast D20/25/30/32/33S-3 G/GC20/25/30/32P-3 G/GC20/25/30/32E-3 Important Safety Information Most accidents involving product

More information

FTR Series Track Roller Assembly Flanged Stud Type Concentric Ball & Tapered Roller Bearings

FTR Series Track Roller Assembly Flanged Stud Type Concentric Ball & Tapered Roller Bearings FTR Series Track Assembly d Type Concentric Ball & Tapered Bearings Type Track A B C D F FL H L M SD SL T Hex Dia + FTR-1.00 1.000 0.75 0.437 1.00 7/16-20 0.50 3/16 1.38 0.22 0.5 0.03 0.78 FTR-1.125 1.125

More information

Installation Instructions - Steel 4 Spring Arm Kits , , , ,

Installation Instructions - Steel 4 Spring Arm Kits , , , , Installation Instructions - Steel Spring Arm Kits 50-0709, 50-079, 50-0750, 50-075, 50-078 GR 8// 07-00 0 N. Marshall Ave. El Cajon CA. 900 For technical support call us at (800) 8-075 Step. Determining

More information

Installation Instructions

Installation Instructions 116-3027, 116-3017 X-Pando Adjustable Steel Protector Installation Instructions 1404 N. Marshall Ave. El Cajon CA. 92020 For technical support call us at (800) 368-3075 NB 6/28/10 607-0112 Step 1. Mounting

More information

Installation, Operation & Maintenance Manual

Installation, Operation & Maintenance Manual Original Instructions Installation, Operation & Maintenance Manual Sentry VREL Control Valve Pressure Conditioning S-SW-IOM-00277-15 1-17 Table of Contents Safety Information... 3 General Safety Precautions...

More information

WELDING POSITIONER MODEL NO:

WELDING POSITIONER MODEL NO: WELDING POSITIONER WP-250 13-3/4 Diameter Table 0 to 5.5 RPM Rotation Speed Manual Tilt Adjustment 0 to 90 Tilting Angle Standard w/foot Control Switch Shipping Weight 113 lbs. Designed for rotation of

More information

Ball Valves Subsea Series

Ball Valves Subsea Series Ball Valves Subsea Series Internal Pressures to 20,000 psi (1379 bar) Water Depths to 12,500 ft (3810 meters) Autoclave Engineers subsea ball valves have been designed to fulfill the ever growing demand

More information

TR-AUGER. Section C INDEX BOOT / HOPPER

TR-AUGER. Section C INDEX BOOT / HOPPER INDEX Section C TR-AUGER BOOT / HOPPER Description Page TR80 / TR100 x 51' basic auger... C2-3 TR80 / TR100 x 61' basic auger... C4-5 TR80 / TR100 x 71' basic auger... C6-7 TR Swing hopper... C8-9 TR-Boot

More information

KEY PART KEY PART NO. NO. DESCRIPTION NO. NO. DESCRIPTION

KEY PART KEY PART NO. NO. DESCRIPTION NO. NO. DESCRIPTION 1 874 78 04-10 Bolt, Fin Hex 1/4-20 x 5/8 12 532 13 09-86 Lens, LH 3 532 12 84-45 Bracket, Pivot Hood LH 13 532 13 09-84 Grille 4 819 09 10-16 Washer, Flat 1/4 21 532 12 69-38 Bumper, Hood 5 817 49 05-12

More information

64203 w/5 Spring External Pivots & Single Stage Tower Single Stage Tower, External Pivots, Up To 24 of Tarp

64203 w/5 Spring External Pivots & Single Stage Tower Single Stage Tower, External Pivots, Up To 24 of Tarp Roll Off Hook Lift System 64203 w/5 Spring External Pivots & Single Stage Tower Single Stage Tower, External Pivots, Up To 24 of Tarp 2014 Roll Rite, LLC, All Rights Reserved Welcome to Roll Rite Automated

More information

Constitution Instructions

Constitution Instructions Constitution Instructions This kit will build a 1:48 scale hull for the USS Constitution frigate. The kit contains the following parts. 1/8 deck with laser etched deck lines 1/8 railing Ribs Center keel

More information

N304-EX. Air Cylinder. NCA1 Series. NFPA Industrial Interchangeable Pneumatic Cylinders Medium Duty 5 to 8 Heavy Duty 1.5 to 14

N304-EX. Air Cylinder. NCA1 Series. NFPA Industrial Interchangeable Pneumatic Cylinders Medium Duty 5 to 8 Heavy Duty 1.5 to 14 Air Cylinder NCA1 Series N304-EX NFPA Industrial Interchangeable Pneumatic Cylinders Medium Duty 5 to 8 Heavy Duty 1.5 to 14 PNEUMATIC CYLINDERS SERIES NCA1 - TABLE OF CONTENTS Description Page No Specifications

More information

MICHIGAN DEPARTMENT OF TRANSPORTATION 6" X 8" (NOMINAL POST) 3-1/2" DIA. 2 HOLES TAPERED HARD WOOD WEDGES (HARDWOOD WEDGE

MICHIGAN DEPARTMENT OF TRANSPORTATION 6 X 8 (NOMINAL POST) 3-1/2 DIA. 2 HOLES TAPERED HARD WOOD WEDGES (HARDWOOD WEDGE X (NOMINAL POST) 1-1/ DIA. 2 HOLES X 8" (NOMINAL POST) 3-1/ DIA. 2 HOLES TAPERED HARD WOOD WEDGES (HARDWOOD WEDGE TO BE OAK, MAPLE OR OTHER APPROVED DENSE HARDWOODS) TO HOLD POST IN A STABLE POSITION AFTER

More information

Keel-stepped and deck-stepped masts,

Keel-stepped and deck-stepped masts, Keel-stepped and deck-stepped masts, C-sections and F-sections The T-base and deck ring systems are made to fit both Seldén s conventional mast sections and their matching furling sections. They are also

More information

Rev B, 03/2012 Page 1 of 8

Rev B, 03/2012 Page 1 of 8 Rev B, 03/2012 Page 1 of 8 www.topendwheelchair.com (800) 532-8677 (727) 522-8677 fax: (727) 522-1007 Force X: Fork Assembly 1 (Page 3) 1 Fork Weldment, Force X 2 1166337 1 Brake Caliper Set (Front & Rear)

More information

310 SERIES TILT-TO-LOAD ROTATOR. The Specialist In Drum Handling Equipment

310 SERIES TILT-TO-LOAD ROTATOR. The Specialist In Drum Handling Equipment OPERATOR S MANUAL FOR MORSE TILT-TO-LOAD DRUM ROTATOR SAFETY INFORMATION: While Morse Manufacturing Co. drum handling equipment is engineered for safety and efficiency, a high degree of responsibility

More information

Parts Manual. Prestige / 1800 / 2800 Series Garden Tractors & Mower Decks RMO

Parts Manual. Prestige / 1800 / 2800 Series Garden Tractors & Mower Decks RMO Parts Manual Prestige / 1800 / 2800 Series Garden Tractors & Mower Decks RMO 25HP Product Mfg. No. Description 1695100 Prestige, 25HP Kohler Hydro w/ps RMO 1695101 1825H, 25HP Kohler Hydro w/ps RMO 1695102

More information

SEADUCER BOATS GAS MONO COME VISIT US ON THE WEB AT

SEADUCER BOATS GAS MONO COME VISIT US ON THE WEB AT SEADUCER BOATS GAS MONO COME VISIT US ON THE WEB AT WWW.SEADUCERBOATS.COM 1 - Pkg. Of 440 push rod ends 1 - Pkg. of solder-on rod ends 2 -water outlet fitting 1-1/4" prop nut 1 -.250" x 24" flex shaft

More information

Ideal 6000 Parts Manual

Ideal 6000 Parts Manual Ideal 6000 Parts Manual SIP Corporation 2006-2008 All Rights Reserved Part Number 20040-8303 SN 60501-60509 Contents Contents...2 Introduction...2 Door...3 Table...4 Front Grinding Head...6 Top Grinding

More information

Mfg. No: Grass Catcher, Single Bag (Export)

Mfg. No: Grass Catcher, Single Bag (Export) Parts Manual Mfg. No: 7600237 Grass Catcher, Single Bag (Export) Copyright Briggs and Stratton. All Rights reserved 01-Apr-2019 Model Components Table Of Contents Page Single Catcher........................................................................................

More information

830 SureFlo Soap Systems Installation Instructions. Foam Soap Cabinet... Pages 2-9 Liquid Soap Cabinet... Pages 10-19

830 SureFlo Soap Systems Installation Instructions. Foam Soap Cabinet... Pages 2-9 Liquid Soap Cabinet... Pages 10-19 830 SureFlo Soap Systems Installation Instructions Foam Soap Cabinet... Pages 2-9 Liquid Soap Cabinet... Pages 10-19 INSTALLATION INSTRUCTIONS SureFlo SOAP DISPENSING SYSTEM FOAM VERSION ONLY B-830 Foam

More information

VTRE Series Track Roller Assembly V-Grooved Stud Type Eccentric Ball & Tapered Roller Bearings

VTRE Series Track Roller Assembly V-Grooved Stud Type Eccentric Ball & Tapered Roller Bearings VTRE Series Track Assembly V-Grooved Type entric Ball & Tapered Bearings VTRE-3.50E A B C D ED EL EO F FL G H P SD SL T Type Track Width Dia -.002 Offset Groove Center Hex Point Shoulder Shoulder Width

More information

THREAD PROTECTORS POLYURETHANE THREAD PROTECTORS LIGHT DUTY PROTECTORS HEAVY DUTY PROTECTORS MISCELLANEOUS PROTECTORS UNION PROTECTORS POLYURETHANE TH

THREAD PROTECTORS POLYURETHANE THREAD PROTECTORS LIGHT DUTY PROTECTORS HEAVY DUTY PROTECTORS MISCELLANEOUS PROTECTORS UNION PROTECTORS POLYURETHANE TH POLYURETHANE LIGHT DUTY PROTECTORS HEAVY DUTY PROTECTORS MISCELLANEOUS PROTECTORS UNION PROTECTORS POLYURETHANE ACR Polyurethane Thread Protectors give your connections total protection. Because of the

More information

DH-9downhill nine. TECHNICAL guide. Table of Contents. Assembly Instructions. Exploded Views

DH-9downhill nine. TECHNICAL guide. Table of Contents. Assembly Instructions. Exploded Views DH-9downhill nine TECHNICAL guide Table of Contents Assembly Instructions Exploded Views 2 5 TOOLS of thetrade yeti style > DEAD BLOW HAMMER > ADJUSTABLE WRENCH > 5MM T HANDLE > 4MM T HANDLE > 6MM ALLEN

More information

SLIDING RAIL SYSTEM 208-580-1904 www.fishfighterproducts.com FFP sliding Rail system The FFP Sliding Rail system will allow you to easily adjust the location of your rod holders, tackle trays, or just

More information

Rocky Mountain Instinct / Pipeline Frame Assembly Guide. Date: March 31, 2017

Rocky Mountain Instinct / Pipeline Frame Assembly Guide. Date: March 31, 2017 Rocky Mountain Instinct / Pipeline Frame Assembly Guide Date: March 31, 2017 1 Table of Contents Front Triangle Preparation... 4 Parts Needed... 4 Instructions... 4 Chain Stay Preparation... 6 Parts Needed...

More information

Filtered compressed air, lubricated or non-lubricated. Maximum torque on each jaw on opening at 87 psi 3.1 in-lbf 10.6 in-lbf 20.

Filtered compressed air, lubricated or non-lubricated. Maximum torque on each jaw on opening at 87 psi 3.1 in-lbf 10.6 in-lbf 20. 2-JAW SELF-CENTERING RADIAL PNEUMATIC GRIPPER (SERIES ) Double-acting. High gripping force at the end of the stroke. Maintenance-free long life and reliability. Various options for fastening. Optional

More information

PINS & BUSHINGS METRIC

PINS & BUSHINGS METRIC PINS & BUSHINGS METRIC PINS & BUSHINGS METRIC CONTENTS PAGE NUMBER General Information 1 Plain & Ball Bearing Guide Posts Press Fit Guide Posts 2 Demountable Guide Posts 4 Automotive Straight Guide Posts

More information

COMPACT NITROGEN DIE SYSTEMS

COMPACT NITROGEN DIE SYSTEMS COMPACT NITROGEN DIE SYSTEMS CONTENTSENTS 3 2 Compact Die Systems Fundamentals 3 Spring rates and scales 45 Standard cylinders Type CDS (3.3 100 kn) 6 Pad mounted cylinders Type CDSP (3.3 200 kn) 7 Low

More information