SPIRAL PIPE - OVAL SINGLE WALL
|
|
- Emily Lloyd
- 5 years ago
- Views:
Transcription
1 SPIRAL PIPE - OVAL SINGLE WALL Duct Direct Pipe and Fittings are manufactured in accordance with 2005 SMACNA Duct Construction Standards (1995 SMACNA Standards on request) OVAL SUBMITTAL Oval Single Wall Duct is constructed of the following minimum. U.S. standard gauges of Galvanized Steel with a 4-ply seam. MAJOR DIMENSION DUCT WIDTH GAUGE Up to and up 18 STANDARD OVAL PIPE LENGTHS Unless requested Duct Direct spiral lengths will be as MAJOR DIMENSION DUCT WIDTH follows LENGTHS foot lengths 24 and up Cut to length (not to exceed 12 foot) Welded Longitudinal Seam Pipe All sizes supplied in 5 foot lengths OVAL FITTINGS & LONGITUDINAL SEAM PIPE SUBMITTALS Oval Fittings & Longitudinal Seam Pipe are constructed of the following minimum NOMINAL DIAMETER GAUGE *All seams are welded; any Galvanized coating damaged in the welding process will be painted with corrosion resistant paint OVAL ELBOW SUBMITTAL 3 gores and 5 gores respectively are constructed with a centerline radius equal to 1½ times the diameter of the elbow. 2 piece die stamped construction will be used through 10 diameter. ELBOW ANGLE NUMBER OF GORES Up to PIECE MITERED ELBOW VANE SUBMITTAL 2 piece mitered elbows with turning vanes will be used where space is limited NOMINAL DIAMETER NUMBER OF VANES SPACING COUPLINGS Pipe-to-pipe joints to 30 diameter are sleeve coupling. Pipe-to-fitting joints to 30 diameter are slip fit; collar of fitting projecting into pipe. Pipe-topipe and pipe-to-fitting connections 31 and larger, Direct Flanges are recommended DUCT (3828) phone fax website 37
2 OVAL SPIRAL PIPE OVAL SPIRAL PIPE OVAL TRIPLE RIB PIPE SP SP - RIB LONG SEAM PIPE F165-OV DUCT (3828) phone fax website
3 OVAL ELBOWS 90º OVAL ELBOW 45º OVAL ELBOW 60º OVAL ELBOW F52-90-OV 30º OVAL ELBOW F52-45-OV F52-60-OV F52-30-OV DUCT (3828) phone fax website 39
4 OVAL ELBOWS 22.5º OVAL ELBOW OVAL MITERED 90º ELBOW F OV OVAL HEEL-TAPPED 45º ELBOW F130-OV OVAL HEEL-TAPPED 90º ELBOW F52-45TAP-OV F91-OV DUCT (3828) phone fax website
5 OVAL BOOT TEES OVAL BOOT TEE OVAL BOOT TEE W/ REDUCER OVAL BOOT CROSS F124-OV F124R-OV OVAL BOOT CROSS W/ REDUCER F121-OV F121R-OV DUCT (3828) phone fax website 41
6 OVAL CONICAL LATERALS OVAL CONICAL LATERAL OVAL CONICAL LATERAL W/ REDUCER F112-OV OVAL CONICAL LATERAL TEE F112R-OV OVAL CONICAL LATERAL TEE W/ REDUCER F120-OV F120R-OV DUCT (3828) phone fax website
7 OVAL CONICAL TEES OVAL CONICAL TEE OVAL CONICAL TEE W/ REDUCER F111-OV OVAL CONICAL TEE CROSS F187-OV OVAL CONICAL TEE CROSS W/ REDUCER F120-OV F120R-OV DUCT (3828) phone fax website 43
8 OVAL STRAIGHT LATERALS OVAL LATERAL OVAL LATERAL W/ REDUCER OVAL LATERAL CROSS F110-OV OVAL LATERAL CROSS W/ REDUCER F187-OV F118-OV F118R-OV DUCT (3828) phone fax website
9 OVAL STRAIGHT TEES OVAL TEE OVAL TEE W/ REDUCER F109-OV F205-OV OVAL TEE CROSS OVAL TEE CROSS W/ REDUCER F117-OV F209-OV DUCT (3828) phone fax website 45
10 OVAL ROUND FITTINGS C/L RECTANGLE TO OVAL OVAL OFFSET REDUCER OVAL ROUND OFFSET F107-OV OVAL GORED WYE F115-OV F123-OV F125-OV DUCT (3828) phone fax website
11 OVAL ROUND FITTINGS OVAL VARIATION WYE BRANCH OVAL PIPE W/ SQ. ACCESS HOLE F116-OV OVAL REDUCING BULLHEAD TEE W/ 1 HEEL VANE OVAL THREE PIECE WYE F134-OV F255-OV F132-OV DUCT (3828) phone fax website 47
12 OVAL ROUND FITTINGS OVAL REDUCING ELBOW OVAL ROUND TRANSITION F122-OV OVAL REDUCING OFFSET F115-OV OVAL OFFSETTING SQUARE TO ROUND F123-OV F108-OV DUCT (3828) phone fax website
13 OVAL ROUND FITTINGS OVAL BULLHEAD TEE W/ VANES MITERED SQUARE TO OVAL F131-OV F58-OV DUCT (3828) phone fax website 49
14 MISCELLANEOUS OVAL DUCT COUPLING OVAL END CAP F100-IS-OV OVAL FITTING COUPLINGS OVAL BELL MOUTH (STANDARD RADIUS) (SHORT RADIUS) F142-OV F100-SS-OV BM-OV DUCT (3828) phone fax website
Precision Duct Systems 4570 Commerce Cir SW Atlanta, GA Phone (404)
Project Name: Engineer: Contractor: Section Number: Date Submitted: Date Approved: Pressure Class: Material Type: Connections: 2005 Up to 10 wg 1995 2 wg pos 1995 4 wg pos 1995 10 wg 2005 neg WG: 1995
More informationFLAT OVAL DUCT AND FITTINGS
AND FITTINGS www.eccomfg.com ECCO INDEX FITTINGS Accessories... 136 Crosses... 136 Elbows... 137 Gauge Selection... 135 Laterals... 136 Ordering... 135 Tees... 136 Transitions... 135 GALVANIZED Gauge Chart...
More informationRectangular-k27 Duct and Fittings Dimensions
An enterprise of United McGill Corporation - Founded in 1951 One Mission Park Groveport, Ohio 43125-1149 614/836-9981, Fax: 614/836-9843 E-mail: mcgillairflow@compuserve.com Web site: http://www.mcgillairflow.com
More informationWe reserve the right to make changes without prior notice. Therefore, all designs, specifications, and product features are subject to change without
Flat Oval Catalog We reserve the right to make changes without prior notice. Therefore, all designs, specifications, and product features are subject to change without notice. The company and its products
More informationDUAL WALL ROUND DUCT AND FITTINGS CONSTRUCTION STANDARDS
ir istribution orporation ouble Wall ROUN U W ROUN UT N FITTINGS ONSTRUTION STNRS Outer Shell Positive Pressure Gauge selection for galvanized (STM 653). Fittings are manufactured with standing seam, welded
More informationQuality Plastic Pipe Fittings. Technical Data. Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed
Quality Plastic Pipe Fittings Technical Data Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed Effective April 1, 2002 PIPE DIMENSIONS IPS-IRON PIPE SIZE Minimum
More informationAir Distribution Corporation Spiral Duct and Fittings are manufactured in accordance with applicable SMACNA, ASHRAE and SPIDA standards.
ir istribution orporation Spiral uct and Fittings onstruction Standards ir istribution orporation Spiral uct and Fittings are manufactured in accordance with applicable SMN, SRE and SPI standards. Galvanized
More informationSaf-T Vent EZ Seal Plus
Technical and Dimensional Data Saf-T Vent EZ Seal Plus Single Wall L 29-4 Stainless Steel Special Gas Vent Tested and Listed to UL 1738/UL S636 by Underwriters Laboratories, Inc 5030 orporate Exchange
More informationNominal Wall Thickness Steel Only in. (mm) Outside Diameter With PVC in. (mm)
PVC-Coated Conduit The ultimate in corrosion protection! OCAL-BLUE Conduit Hot-dip galvanized steel or aluminum conduit. Nominal.00 ( mils) blue urethane coating on interior. Hot-dipped galvanized threads
More informationRules for the Installation, Inspection and Testing of Air Reservoirs (Other than on Locomotives)
Rules for the Installation, Inspection and Testing of Air Reservoirs (Other than on Locomotives) December 5, 1994 TM Rules for the Installation, Inspection and Testing of Air Reservoirs (Other than on
More informationDazzling Dragons Play Magical Mini Golf
25 Putt-Putt Holes Putt-Putt Simpson s style: https://www.youtube.com/watch?v=iudkwvgdrag BLUE = Water hazard, not part of the area of the hole RED = Obstacle, part of the area of the hole = Tee box, part
More informationDuct Technical Information TECHNICAL INFORMATION & DIMENSIONS
TECNICA INFORATION & DIENSIONS Contact Spears for any Information not found. Due to aterial Cost Variations, Prices Subject to Change. Check On-line Catalog @ www.spearsmfg.com Page 236 Fume & Air Duct
More informationButtweld Fittings ANSI B16.9, ANSI B16.28, MSS-SP-43, MSS-SP-95, MSS-SP-97
uttweld Fittings NSI 16.9, NSI 16.28, SS-SP-43, SS-SP-95, SS-SP-97 90 LR ELOWS 45 LR ELOWS 180 LR ELOWS 90 SR ELOWS oncentric and eccentric reducers, equal and reducing tees, 45 and 90 elbows, buttweld
More informationAn example of systems that are inherently excellent applications for the cupronickel product are:
W&O Supply, founded in 1975, is the leading provider of marine piping solutions in the United States. W&O Supply, through its branch locations, distributes and provides services for valves, pipe, fittings,
More informationTECHNICAL DATA. Notes: For use with Trim Charts on Pages 2-4
Page 1 of 5 Telephone: 29-95-9501 Technical Services: 877-8-5 Fax: 29-8-0 Email: techsvcs@vikingcorp.com Model F Dry Valve with Trim Valve Size Part Number 17PTR 175PTR 17PTR Standard Trim Sets include
More informationSTANDARD SPECIFICATION FOR SPLIT TEES (HOT TAP MATERIAL)
STANDARD SPECIFICATION FOR SPLIT TEES (HOT TAP MATERIAL) TEE (HOT TAPPING MATERIAL) S-04-02-040 Page 1 of 7 1.0 SCOPE This specification covers the basic requirements for the design, manufacture and supply
More informationTUBE SIGN POST PRODUCTS
Western Canada TUBE Products Ltd. SIGN POST PRODUCTS Company Profile With over 100 years of experience on staff and the largest inventory in Western Canada, we have the ability to meet all your sign support
More informationB104ZN BLTD 4H 90 L Bracket. Features. Material, Color, and Finish. Dimensions and Weight. Long Description
B104 BLTD 4H 90 L Bracket Cooper B-Line/Cable Tray Catalog Number Manufacturer Description Weight per unit Product Category Features Material Material, Color, and Finish Finish Dimensions and Weight Size
More informationMini Channel & Fittings
Our mini channels and fittings provide for an economical method of supporting light load requirements on a strut system. Channel Channels are cold formed on our modern rolling mills from 18 Ga. (1.2 mm)
More informationBARRIER OFFSET 0" A 6" 6" A 12" 12" A 26" A 26" 3A OR 4A L OR S * ** L OR S L OR S
ACCEPTABLE (TCB) TYPES AND ANCHORING DETAILS BASED ON UNDERLYING SURFACE TYPE AND BARRIER OFFSET FROM DROP-OFF BARRIER OFFSET UNDERLYING SURFACE 0" A 6" 6" A 12" 12" A 26" A 26" TCB TYPE DETAIL TCB TYPE
More informationMSC Guidelines for Independent Fuel Tanks
References: Contact Information a. 46 CFR 58.50 (Independent Fuel Tanks) b. 46 CFR 119.440 (Independent Fuel Tanks) c. 46 CFR 182.440 (Independent Fuel Tanks) C. J. Robuck, LCDR, Chief, Engineering Division
More informationPSI Compakt - Special Seals
Pipeline Accessories PSI Compakt - Special Seals Compakt - special versions also with KTW/W270 for potable water General Information Selection Guide Order Submittal Sheet Installation Instruction 1 PSI
More informationunittool punch & die company TOOLING for Fabricating & Duplicating Type Machines H&O DIE SUPPLY, INC
CATALOG F&D-91 TOOLING for Fabricating & Duplicating Type Machines INTRODUCING New! 1/2" & 5/8" Drop In Tooling unittool punch & die company TOOLING FOR FABRICATING & DUPLICATING TYPE MACHINES Manufactured
More informationASYBCO 90 O ELBOW LONG RADIUS O.D. I.D.
90 O ELBOW LONG RADIUS Standard weight Extra strong Schedule 160 Double extra strong ASTM A-234 ASME / ANSI B16.9 Carbon and ferritic alloy steel Produced from X-rayed, stress-relieve welded pipe. Welds
More informationInserta Products, Inc.
CODE 6 & 6 -BOLT SPLIT TYPE The INSERTA CODE 6 and CODE 6 -Bolt, Split Flange Type, Modular Connectors, are used in integrated hydraulic systems in place of welded and threaded pipe fittings. These are
More informationPro-Form Direct Vent System
The Pro-Form direct vent system has best in industry features that provide ease of installation, extreme durability and superior performance. The Pro-Form direct vent system is fully tested and listed
More informationPVC DWV FITTINGS PVC-0312 MARCH 2012 SUPERCEDES PVC-0112 ASTM D2665
PVC DWV FITTINGS PVC-0312 MARCH 2012 SUPERCEDES PVC-0112 ASTM D2665 COUPLING (Hub x Hub) 434043 1 1/4 50 10200 9.04 431130 1 1/2 100 10800 2.04 431148 2 75 5400 2.66 431155 3 50 1500 9.16 431163 4 35
More informationLiquefied gas cargo tanks and process pressure vessels
.1 -.3 Liquefied gas cargo tanks and process pressure vessels.1 General.1.1 The present texts give the general principles which are applied by Classification Societies for approval and survey of the relevant
More informationAMADA TYPE TOOLING 2"(C)STATION 2-WAY CONCAVE. Add 3,000. Add 4,000. Add 5,000. Add 6,000 (UNIT JPY)
AMADA TYPE TOOLING Punch Press Tools Standard Specifications And Options STANDARD SHAPES RO SQ RE OB SD WD PUNCHES DIES STANDARD KEY POSITION SETTINGS (TOP VIEW) 1/2"(A)STATION 1-1/4"(B)STATION 2"(C)STATION
More informationAVK SERIES 601, 602, 603 & 605 UNIVERSAL COUPLINGS, ADAPTORS & END CAPS INSTALLATION, OPERATION & MAINTENANCE MANUAL
Instruction for use Thank you for selecting an AVK product. With correct use, the product is guaranteed to deliver a long and reliable service. This manual has been prepared to assist you with the installation,
More informationOrifice plate, model FLC-OP Orifice flange, model FLC-FL Annular chamber, model FLC-AC
Flow measurement Orifice plate, model FLC-OP Orifice flange, model FLC-FL Annular chamber, model FLC-AC WIKA data sheet FL 10.01 Applications Power generation Oil production and refining Water treatment
More information- Written price quotations are valid for 30 days from the date of the quote unless otherwise noted.
SPECIFICATIONS - All material is solid brass with a #8 mirror finish unless otherwise noted. - All material sold by length is priced in one foot increments. ORDERING PROCEDURE - Use a Purchase Order number.
More informationPVC Electrical Fittings & Accessories Price List
PVC Electrical Fittings & Accessories Price List Effective August 26, 2002 Electrical Products PVC Electrical Fittings & Accessories Price List PVC Electrical Standards 2 Schedule 40 Fittings: Couplings,
More informationNominal O.D. SERIES 110FW. 64mm 89mm 114mm 168mm 222mm 276mm 330mm 391mm 445mm 498mm 552mm
(DN25) 1.5" (DN40) (DN100) (DN150) (DN200) (DN250) (DN300) 1 (DN350) (DN400) 1 (DN450) (DN500) 2 (DN600) 3 (DN900) 4 (DN1200) 5 (DN1350) O.D. 2.50" 10.8 15.3 43.3 64mm 1 C 2 2 2 L Minimum L 0.7 1.0 1.3
More informationSIZING AND CAPACITIES OF GAS PIPING
SIZING AND CAPACITIES OF GAS PIPING A.1 General piping considerations. The first goal of determining the pipe sizing for a fuel gas piping system is to make sure that there is sufficient gas pressure at
More informationFord Service Saddles and Tapping Sleeves
Section AA 5/2001 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487
More informationPAGE INDEX PAGE # CATALOG NUMBER BUS SUPPORTS B 1 AWSTFR BUS SUPPORTS B 2 AWTTFR BUS SUPPORTS B 3 AWTESR BUS SUPPORTS B 4 AWLI BUS SUPPORTS B 6 AACB
PAGE INDEX ABS ABS (2) ATSBS ABR AIWBS AUAB UAS AABS AAS AL ALS ATCF ATCC CL BTCF RS APT ALC AV ALT ALT (N) ATCF U AWCF AW2CF AWTT AWTT 15 AWTT2 AWST DESCRIPTION MULTI RANGE SINGLE CABLE MULTI RANGE DOUBLE
More informationVertical and Horizontal Bladder Tanks
DATA SHEET Vertical and Horizontal Tanks Application The ANSUL bladder tank is one component in a balanced pressure proportioning system. Its operation requires no external power other than a pressurized
More informationEPOXY FITTINGS DIMENSIONS
Bulletin No. A150 May 1, 2004 EPOXY FITTINGS DIMENSIONS 2"-16" GREEN THREAD fittings may be used with GREEN THREAD and RED THREAD II piping. Refer to Chemical Resistance Guide, Bulletin No. E5615, for
More informationGeneral Information Gravity roller conveyors are available in many sizes and configurations as shown on the following pages. There are many factors to consider when selecting a gravity conveyor. The following
More informationCHAIN LINK FENCE GATE
WALCOOM Walcoom Corporation CHAIN LINK FENCE GATE Chain link fence gate is a versatile product in many aspects, here, Walcoom provides buyers with sufficient strength and durability chain link fence gate
More information300lb MALLEABLE FITTINGS
NIPPLES & FITTINGS MLLEBLE FITTINGS MLLEBLE FITTINGS MLLEBLE FITTINGS ISO 9002 - CERTIFICTE OF QULITY - UL/ LISTED ND PPROVED T 300 PSI Our quality fittings are made with care and attention to detail.
More informationWELL COMPLETION & PROTECTION. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD
WELL COMPLETION & PROTECTION MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com WELL COMPLETION & PROTECTION TABLE OF CONTENTS TABLE OF CONTENTS (FLUSHMOUNTS)... 2-5 MONITORING
More informationTapped Hole (.375) Tapped hole 15 (.594) (.391±.004) Frame 19±0.2 (.750±.008) 12.7±0.2 (.500±.008) 19±0.2 (.750±.008) R S 4 x Ø 5.4 (.
434 Lift-off In-line Zinc can also be 31.5 19.1 (.750) For Lift-Off For on Lift-Off 1300 (300 lbf) 2200 (500 lbf) 56 T.P.I. (2.21) 31.5 19.1 (.750) Tapped hole Ø 9.5 (.375) ultimate 3300 (750 lbf) 9300
More informationSprocket Selection Guidelines
Sprocket Selection Guidelines Table 1 Information Necessary to Order Sprockets 1. Chain Size Number, type, or drawing number of the chain to be used on the sprocket. (The suitability of a sprocket depends
More informationTAZGO DIVISION. Available Services: Shearing, Plate Burning, Saw Cutting, Drilling
TAZGO DIVISION STEEL~STAINLESS~ALUMINUM Beams ~ Channel ~ Flat bar ~ HR Rounds ~ CR Rounds Angle ~ Square Tube ~ Rectangle Tube Pipe~ DOM~ Plate~ HR sheets ~ CR sheets~ Galvanized Sheets ~ Cross Members
More informationABS DWV FITTINGS BOW INDUSTRIAL CORPORATION
JANUARY 31, 2011 SUPERCEDES ABS-0111 ASTM D2661 BOW INDUSTRIAL CORPORATION CHAMPLAIN, NY USA TEL: 800.852.8527 info@bow-group.com FAX: 800.526.5668 www.bow-group.com JANUARY 31, 2011 Page 1 COUPLING (Hub
More informationSection 7 AMERICAN. Specials
Section 7 AMERICAN Specials AMERICAN Specials The principal standards relating to AMERICAN Specials are ANSI/AWWA C110/A21.10, C151/A21.51, and C153/A21.53. These and other standards are referenced throughout
More informationSIZING AND CAPACITIES OF GAS PIPING
APPENDIX A (IFGS) SIZING AND CAPACITIES OF GAS PIPING (This appendix is informative and is not part of the code. This appendix is an excerpt from the 2003 International Fuel Gas Code, coordinated with
More informationRevisions to the Regulations for Agility Trials
Revisions to the Regulations for Agility Trials Effective January 2, 2018 Equipment changes may be done prior to January 2, 2018, but must be completed by January 2, 2018 This insert is issued as a supplement
More informationMoai Bike Rack Heavy Duty Submittal Sheet. Materials: 2.0 Schedule 40 Pipe (2.375 OD) Finishes: Capacity: Mount Options: Setbacks: 2 Bikes
Submittal Sheet Materials: 2.0 Schedule 40 Pipe (2.375 OD) Finishes: Galvanized An after fabrication hot dipped galvanized finish is available. Powder Coat Our powder coat finish assures a high level of
More informationGAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS
GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS CONTINENTAL INDUSTRIES, INC. The Ultimate Connection CONTINENTAL INDUSTRIES, INC. ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, Inc.,
More informationAPG001. Application Guide for Gas. T: F: E:
APG001 Application Guide for Gas T: 01480 442600 F: 01480 458829 E: customerservice@gpsuk.com www.gpsuk.com Application Guide for Gas Introduction 3-4 Range Overview 5-6 PE80 Yellow Pipe 7-9 Excel Yellow
More informationCoils Designed to Fit Your Requirements. Temtrol Manufacturing OEM & Replacement Coils Since 1955
Temtrol Manufacturing OEM & Replacement Coils Since 1955 Coils Designed to Fit Your Requirements Chilled & Hot Water Direct Expansion Steam Distributing Condenser Standard Steam Quick Ship Program with
More informationSIZING AND CAPACITIES OF GAS PIPING
APPENDIX A (IFGS) SIZING AND CAPACITIES OF GAS PIPING (This appendix is adopted as part of the code.) A.1 General. To determine the size of piping used in a gas piping system, the following factors must
More informationA REVIEW OF THE 2000 REVISIONS TO ANSI 2530/API MPMS 14.3/AGA REPORT NO. 3 - PART2 Paul J. LaNasa CPL & Associates
A REVIEW OF THE 2000 REVISIONS TO ANSI 2530/API MPMS 143/AGA REPORT NO 3 - PART2 Paul J LaNasa CPL & Associates PO Box 801304, Houston, TX 77280-1304 ABSTRACT Periodically, natural gas measurement standards
More informationFull Service Warehouse
DIRECT FAX (320) 235-1816 110 19th Street NW P.O. Box 1178 Willmar, Minnesota 56201 (320) 235-4070 1-800-992-8853 1-800-328-8994 Full Service Warehouse 3-D LASER SHEARING BREAKING FLAME CUTTING PLASMA
More informationMade in U.S.A. Narrow-U Bike Rack Heavy Duty Submittal Sheet. Materials: Finishes: Mount Options: Setbacks:
Submittal Sheet Materials: 2 Schedule 40 Steel Pipe (2.375 OD) Finishes: Galvanized An after fabrication hot dipped galvanized finish is available Powder Coat Our powder coat finish assures a high level
More informationAWWA C504 COMPLIANT VALVES FROM 3 THRU 108
AWWA C504 COMPLIANT VALVES FROM 3 THRU 108 PO Box 411 Berwick PA 18603 800-247-VALV www.crispinvalve.com 500 SERIES: Sizes 3-20 Available The K-Flo 500 Series is a heavy-duty resilient seated butterfly
More informationBicycle Management Products From Columbia Cascade Company
SM CycLoops Twist Bicycle Management Products From Columbia Cascade Company 12 93 13 12 93 14 Artful CycLoops (3) 2178-83-E-C 2178-52-E-C < Original CycLoops CycLoops Arch Super CycLoops 2175-8-P-S Perforated
More informationSIZING AND CAPACITIES OF GAS PIPING Reserved
APPENDIX A (IFGS) SIZING AND CAPACITIES OF GAS PIPING Reserved 2003 INTERNATIONAL RESIDENTIAL CODE 529R APPENDIX A SIZING AND CAPACITIES OF GAS PIPING This page left intentionally blank. 530R 2003 INTERNATIONAL
More informationGalvanized Rigid Conduit
Galvanized Rigid Conduit Conforms To: C80.1 - UL 6 ANSI C-80.1 UL Min. WGT. Per 100 Feet in LBS. INCL. CP. O.D. I.D. Thickness Threads Per Inch Feet Per Lift Color Code Thread Protector 1/2" 79.840.632.104
More informationFootball Equipment. 5 9/16" Gooseneck Goalposts
5 9/16" Gooseneck Goalposts Football Equipment FB55CG 5 9/16" Gooseneck College Goalposts Applies also to FB55CG-SY and FB55CG-WT Goalposts shall meet all NCAA rules. Goalposts shall be of the single bent
More information61R2 STANDARD REGULATOR COMPACT REGULATOR. Phone Fax
6R STANDARD REGULATOR COMPACT REGULATOR 496 Phone 7.63.888 Fax 7.63.690 6R AND 496 REGULATORS General Information The Model 6R and 496 Compact Regulator (CR) are designed to deliver reliable and safe regulation
More informationVK/VP SERIES : Sealless Vertical Pump. Assembling Instructions 2010
VK/VP SERIES : Sealless Vertical Pump Assembling Instructions 2010 20610 Manhattan Place Suite 116 Torrance, CA 90501 Phone: 310-328-9114 Fax: 310-328-9441 1. Motor Shaft and Pump Base (1) (2) Place a
More informationHDPE. Dredging Pipeline
HDPE Dredging Pipeline R Ace Flowtech Co., Ltd Office address: No.2, 2-1601, Rongyuan Road, Huayuan Industrial Park, Tianjin Binhai Hi- Tech Area, Tianjin City, China, 300384 Factory address: No.51 Lutai
More informationHardened Steel Washers
USS (Type A Wide) Flat Washers Hardened Steel Washers Grade 8 S.A.E. Dimensions American Standard Lbs. Per No./Pcs. Gauge M Pcs. Per Lb. 3/16 9/16 1/4 18 (3/64) 2.8 361 1/4 3/4 5/16 16 (1/16) 6.7 149 5/16
More informationContinental Industries TRANSITION FITTINGS or FAX Visit
Continental Industries TRANSITION FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
More informationTOLL FREE: SIZING ( )
Headquarters 915 Oberlin Rd. SW P.O. Box 810 Massillon, OH 44648 Tel: 330-837-4203 Southern Facility 7560 Industrial Highway P.O. Box 10157 Macon, GA 31297 Tel: 478-781-8725 WWW.MIDWESTERNIND.COM TOLL
More informationA COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32
A COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32 Component Flat Washers Component Flat Washers The Largest Selection in the World! Steel, Stainless Steel and Brass The standard Flatwasher
More informationProcess Industry Practices Pipeline Systems
September 2013 Process Industry Practices Pipeline Systems PIP PLX03CS5S01 Pipeline Systems, ASME B31.8 Material Specification Inside Production, Well Site Facility, Class 300, Carbon Steel, 0.03125" (1/32
More informationFluid Dispensing Systems H O S E R E E L S H O S E S HOSE REELS
Fluid Dispensing Systems H O S E R E E L S H O S E S HOSE REELS HOSE REELS SIGNATURE SERIES H O S E S R E E L S FEATURES & BENEFITS Eight position locking precision die cast latch mechanism, with secure
More informationINSERT PRESSURE FITTINGS PRODUCTS PRICE LIST PRICE GROUP DISCOUNT MULTIPLIER DESCRIPTION 05 PVC INSERT FITTINGS
PRICE GROUP DESCRIPTION 05 PVC INSERT FITTINGS DISCOUNT MULTIPLIER Phone: (315) 451-1100 or (800) 776-2266 Fax: (800) 729-3299 7652 Morgan Road Liverpool, New York 13090 PRODUCTS INSERT PRESSURE FITTINGS
More informationSERIES A24 RAISED RIB
SERIES A24 RAISED RIB Eurobelt Series A24 Raised Rib conveyor belt has been designed mainly to be used with finger plates. It has ribs that, sticking out 6 mm above the module, provide a greater resistance
More informationBrass Tubular. P-Traps. Item # Description Qty
B r a s s T u b u l a r P-Traps 1 1-1/4 17 ga CP P-Trap 1B with brass nuts 1D with box flange 1BD with box flange and brass nuts 115 with 15 wall bend 1B15 with 15 wall bend and brass nuts 1D15 with 15
More informationCHANNEL & SUPPORT SYSTEMS
Total Cable Management Solutions CHANNEL & SUPPORT SYSTEMS Unitrunk Intelok Channel is a strong, easy to erect support system, ideal for supporting cable trays, cable ladders, pipes and ducting and is
More informationOriginally Issued: 10/08/2010 Revised: 10/27/2017 Valid Through: 10/31/2018
ITW BUILDING COMPONENTS GROUP INC. ITW ALPINE HANGERS AND ANCHORS CSI Section: 06 05 23 Wood, Plastic and Composite Fastenings 1.0 RECOGNITION ITW Alpine Hangers and Anchors recognized in this report has
More informationInflatable Packer Single & Double. Single & Double Packer Dimension. Wireline Packer. Water Testing Packer (WTP) Packer
Inflatable Packer Single & Double Single & Double Packer Dimension Wireline Packer Water Testing Packer (WTP) Packer Packer Working Pressure & Depth Chart Packer Water Hand Pump Packer Air Driven Pump
More informationRoughneck TM Mesh Slings
Roughneck TM Slings ROUGHNECK WIRE MESH SLINGS Widely used in metalworking shops and steel warehouses where loads are abrasive, hot or tend to cut web slings Features and Benefits Promotes Safety Steel
More informationWHOLESALE PRICING. GLASS THICKNESS 1/8" 3/16" 1/4" 3/8" 1/2" 1/4" Lami
WHOLESALE PRICING CUSTOM GLASS & MIRROR 1/4" Lami Clear $1.76 $2.44 $2.52 $5.05 $6.43 $6.60 Bronze Grey $4.00 $4.12 $5.00 Greylite 14/Midnight CALL Clear Mirror $3.16 $3.65 $3.65 Bronze or Grey Mirror
More information1800C and 1800C-HC Service Regulators
SB 855.9 800C and 800C-HC Service Regulators Maximum Pressure 5 Table of Contents 800C Regulator Information...................... 800C-HC Regulator Information.................. 800C and 8C Service Regulators...............
More information15000 Series Exhausting Arm - Wall Mount Models: 15076/15106/15146
Operation and Maintenance Manual 15000 Series Exhausting Arm - Wall Mount Models: 15076/15106/15146 MONOXIVENT - SOURCE CAPTURE SYSTEMS - info@ Oct. - 2015 Receiving Assembly Information 15000 Series Exhausting
More informationHuat Siang Hardware Sdn. Bhd. Wire Mesh. Steel Sheet Piles. 1 of 33
Huat Siang Hardware Sdn. Bhd. Wire Mesh Steel Sheet Piles 1 of 33 2 of 33 Rails Purlins 3 of 33 4 of 33 Plates Plates 5 of 33 Hollow Sections HOLLOW SECTIONS SUPPLIER IN MALAYSIA - Huat Siang Hardware
More informationNAVIGATOR PROP BUILDING INSTRUCTIONS & PHOTOS
NAVIGATOR PROP BUILDING INSTRUCTIONS & PHOTOS Science under the ice Ice sheet At regional competitions the ice is simulated by 8 ft x 4 ft ½-inch foam sheeting (Home Depot part #703990 [in store only],
More informationNEW TYPE M PRESSURE RELIEF DEVICE
NEW TYPE M PRESSURE RELIEF DEVICE M PRESSURE RELIEF DEVICE ACCORDING TO EN 50216-5/A2 PATENTED 2 PRESSURE RELIEF DEVICE TYPE 50 M Section A-A 170 139 Transformer tank F 41.5 3 ø48.3 ø166 A P.R.D. TAG A
More informationPIPE, VALVE & FITTING
1. 2. 3. 4. Steel Pipe 1.1. Sch. 40 Black T&C 1.2. Sch. 40 Black PE 1.3. Sch. 80 Black PE 1.4. Sch. 40 Galvanized PE Threaded Steel Fittings 2.1. Sch. 40 Black Fittings 2.2. Sch. 80 Black Fittings 2.3.
More informationEVALUATION SUBJECT: SPUNSTRAND STANDARD AND INSULATED UNDERSLAB DUCTS
ICC-ES Report ESR-1681 Reissued 12/2017 This report is subject to renewal 12/2018 EVALUATION SUBJECT: SPUNSTRAND STANDARD AND INSULATED UNDERSLAB DUCTS DIVISION: 23 00 00 HEATING, VENTILATING AND AIR CONDITIONING
More informationINSTALLATION & OPERATION MANUAL AORCS ATLAS OPERATING ROOM CEILING SYSTEM. Redefine your comfort zone.
INSTALLATION & OPERATION MANUAL AORCS ATLAS OPERATING ROOM CEILING SYSTEM IOM AORCS ATLAS OPERATING ROOM CEILING SYSTEM Table of Contents Inspection...3 Examination...3 Preparation...3 Installation...4
More informationTorque Specifications
SENR3130-10 Torque Specifications All Caterpillar Products S/N From the library of Barrington Diesel Club CONTENT General Information 01/07/2005 Introduction to Torque 01/07/2005 Torque-Turn 01/07/2005
More informationUSG Ceiling Solutions. LOGIX Integrated Ceiling Systems INSTALLATION GUIDE
USG Ceiling Solutions LOGIX Integrated Ceiling Systems INSTALLATION GUIDE LOGIX Integrated Ceiling Systems INSTALLATION GUIDE Logix Brand Integrated Ceiling Systems integrated ceiling systems from USG
More informationFoundation Products. Poured In Ground Anchor Bolts E1 - E4. Structural Foundations E5 - E12. Copyright 2016 s Industry Inc. SIE-RA-CMP EN
Foundation Products Poured In Ground Anchor Bolts E1 - E4 Structural Foundations E5 - E12 EA EB Poured in Ground Anchor Bolts Layout SIEMENS Anchor Bolts 131702-4X shown for reference purposes only! Actual
More informationKlassikDrain Section K200/K300 ACO DRAIN. Introduction Pgs 1-13 Selecting the right product
AO DRAIN Introduction Pgs - Selecting the right product KlassikDrain Pgs 4-, 54-6 General purpose trench drain Part - K00, K50 & Bricklslot KlassikDrain Pgs 4-5 General purpose trench drain Part - K00/K00
More information& WIZARD ACCESSORIES
& WIZARD ACCESSORIES 1 Strut Channels 2 Hardware 3 Fittings & Accessories 4 Clamps 5 Inserts & End Caps 6 Slotted Angle & Pipe Supports 7 Engineering Data G-Strut Metal Framing Division 4100 13th Street
More informationHorizontal Bladder Tanks
DATA SHEET Horizontal Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationTerminology. 2 MESH WIRE CLOTH (count from center to center of wires) 1/2 INCH OPENING WIRE CLOTH (clear space between wires)
CALENDERING - A rolling operation which flattens the knuckles of wire cloth giving it a smoother surface. CRIMP - Undulations in warp and fill wires which hold each other in place. FILL WIRE - aka SHUTE
More informationMeasuring the Training Rig
TRADE OF Industrial Insulation PHASE 2 Module 6 Insulation & Cladding The Training Rig UNIT: 1 Produced by In cooperation with subject matter expert: Michael Kelly SOLAS 2014 Table of Contents Introduction...
More informationZODIAC 601 XL. Position the main spar parallel to the edge of the workbench. Raise the wing skeleton on steel beams or spacers.
Check: Sight down the rear channel 6W7-1 and the spar, check that they are straight. The aft edge of the channel is the reference to position the Rear skins. Position the main spar parallel to the edge
More informationSae 4 Bolt Flange Port Dimensions
We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with sae 4 bolt flange port
More informationRANGER PROP BUILDING INSTRUCTIONS & PHOTOS
RANGER PROP BUILDING INSTRUCTIONS & PHOTOS Science under the ice Ice sheet At the international competition, the science under the ice product demonstration will take place under an actual sheet of ice.
More informationSERIES E30 RAISED RIB
SERIES E30 RAISED RIB Eurobelt Series E30 Raised Rib conveyor belt has been designed mainly for making product transfers by using finger plates. Due to its smooth surface of projecting ribs, it is recommended
More information