HyperSecureLink V6.0x User Guide

Size: px
Start display at page:

Download "HyperSecureLink V6.0x User Guide"

Transcription

1 HyperSecureLink V6.0x User Guide Note: This software works with the LS-30 Version (06.0x or later) 1, Hardware Installation: 1-1, Connection Diagram for USB or RS-232 Computer Interface To LS-30 CM1 To PC USB or CM Port CM1 cable USB or RS-232 Adaptor HyperSecureLink Software (Note: For the USB Adaptor, please refer to the USB-3 USB Adapter User Guide in the CD RM.) 1-2, Connection Diagram for Internet Remote Access To LS-30 CM1 Internet CM1 Cable Ethernet Adaptor Router BF-450 or BF-210 HyperSecureLink or CMS polling software (Note: For the Ethernet Adaptor, please refer to the Ethernet Adaptor User Guide in the CD RM.) 1-3, Connection Diagram for Data Communication Module (Dialup Modem) PSTN Tel. line To LS-30 CM1 Tel Line CM1 Cable Data Communication Module HyperSecureLink or CMS polling software (Note: For the Data Communication Module, please refer to the DM-30 Data Communication Module User Guide in the CD RM.)

2 Important Notice, Before running the HyperSecureLink V6.0x, please check the following settings on the Base Unit, 1). Master Mode\ Set CM1 Control\ CM1=N. 2). If the LS-30 CM1 Control - Need Password then a valid password should be set in System & Link and then click the submit button. Different password has different access right to the system. Please refer to the Appendix A. CM1 control with PSW needed/ unneeded and their access right on LS-30

3 2, Software Installation: Copy the whole "HyperSecureLink V6.0x" directory from CD RM to the Disk C. Note: The whole program size is about 100MB, please ensure the Disk C has enough free space for the program. For the user with Windows XP/Vista or later version S 1,pen the directory of HyperSecureLink V6.0x 2, Double click the RUN.BAT For the user with other S. 1, pen the directory of HyperSecureLink V6.0x 2, pen the sub-directory of DB. 3, Remove the READ NLY Attribute of the following 4 files: DB.JDS, db_lga_ , db_lga_anchr, db_temp.jds 4, pen the directory of HyperSecureLink V6.0x 5, Double click the RUN.BAT

4 A DS window will be shown first. Then the peration window follows,

5 3, Select Link 3.1 Using CM1 interface to access the LS-30 ( RS-232 Adaptor or USB-3 Adaptor is needed ). Select RS-232 (Local). The software will scan the RS-232 ports that are available in your PC. Select the correct one to use.

6 3.2 Using Ethernet interface to access the LS-30 (Ethernet adaptor is needed and the router should be set in advance. Please refer to the Ethernet Adaptor User Guide). 1, Select Ethernet (Remote). 2, Enter the IP address or domain name and the Port number of the Ethernet Adaptor that connects to the LS-30 Base Unit and click Add. IP address and port number Domain Name and port number 3, Mark the IP address and click the Target to assign this address as the operation target.

7 You can use any word process software to save the frequently use IP address or domain name into the file of ipaddr.txt as below then the program will load these address automatically when you run the program. This example shows that two IP addresses: :1700 and scientech.dyndns.org:1680 will be listed in the IP:Port box and the current peration Target is scientech.dyndns.org: Use Data Communication Module (Dialup Modem) to access the LS-30. (Please refer to the Data Communication Module User Guide) 1, Select Modem. 2, Select the dial signaling (Tone/ Pulse) of the telephone system that connects to your computer. 3, Select the correct Modem CM port on your computer. 4, Enter the telephone number of the Data Communication Module that connects to the LS-30 Base Unit and click Dial. Note: you can turn on the speaker on your computer to monitor the connection process. 5, At the end of your operation you should click the Disconnect button to disconnect the communication link.

8 4, Database User Name and Password (These two settings are not necessary if you don t use the Device Name Database or the CM1 Control of the LS-30 Base Unit doesn t need password.) Device Database: Please refer to the 6. Device Name Data Base Management. User can assign a device name to each sensor/controller. When the Event Log, Device Status or Special Sensor Reading are recalled, the software will match the Device Type/ Zone Number under in the Data Base and show the corresponding device name on the table. Password: If the setting of the LS-30 Base Unit CM1 Control needs password ( please refer to the LS-30 User Manual (3) Master Mode\ Set CM1 Control) then you should enter one of the passwords of Master, CM1 or CMS2. Please refer to the Appendix A: (CM1 control with PSW needed/ unneeded and their access right on LS-30) Note: Following operations need a suitable password regardless of the setting in the LS-30 system. To read/edit user passwords the Master Password is needed. To change CMS password the corresponding CMS Password is needed. To run the Restore operation the Master Password is needed.

9 5. peration Select the function from the Menus bar. * Click down arrow to select the command. * Update the setting of the LS-30 Base Unit by clicking. * Read the status from the LS-30 Base Unit by clicking. Menus bar Update setting Down arrow Read status * Checking the function and the operation of the command by clicking. What s the meaning of this operation? How to operate this function? This is the answer.

10 *N / FF control of the switches. Select N/FF button and then click. * Read the status from the LS-30 by clicking. The upload time depends on the data transmission speed and how many data do you want to read. After the data transmission is completed, the software needs a little bit time to match the User Data Base and then show the result on the screen. Print to File: Press this button will save the reading results under the directory of HyperSecureLink in html format for your further analysis.

11 * Entering figures and click to update the data/ parameters in the LS-30 Base Unit. * Enroll Device Procedure: All the settings are ok! You want to change settings. 1), Press Enroll Device, select the device type. 2), Press the Press to Start Code Learning button. 3), Press the test button or trigger the device that you want to learn in 60 seconds. 4), When the Base Unit receives the RF signal from the device, the default device settings will be listed on the display and the system will assign a zone number to this device automatically. 5), If the assignment is ok for you, press the K button. therwise press Change Setting and select proper settings then press the Edit Settings then Press to Change.

12 * Using command button to send commands to the LS-30 Base Unit * Send messages to show on the Base Unit LCD display. Key in the message then click to send the words to the LS-30 Base Unit. After receiving the message, the LS-30 will issue Message In voice in every 5 minutes to alert the user and user can read the message by key in Hot Key 5. To stop the Message In alert by key in the Hot Key C (Clear command.)

13 6. Device Name Data Base Management User can assign a device name to each device and zone. When the Event Log, Device Status or Special Sensor Reading are read, the software will match the Device Type, Zone Number and the User Name in the Data Base and show the corresponding device name on the table. For example, if you installed two systems, one in your company (name: scientech) and the other one in your home (name: John), and they both have the Door Magnet Burglar Sensor at Zone The device name of the Burglar Sensor in the office is Front Door. The device name of the Burglar Sensor at your home is Living Room. The software uses different User Name to identify the two different devices although they have the identical Device Type and Zone Number. * Creating the Device Name Data Base: Add Device Name to the Data Base 1, Enter Group Number. 2, Enter Unit Number. 3, Select Device Type. 4, Enter User Name. 5, Enter Device Name. 6, Press Add. * Check Device Name List: Press these title buttons, the sequence of the components in the Data Base will be rearranged. Refresh the Data Base each time after you added a device name.

14 7. Backup&Restore * Backup: User can backup the system settings (not including the passwords) as a.sav file in the Backup directory. The file name can be changed to identify different systems and the time of backup file generated. Name can be changed to identify the system and backup time. * Restore: User can restore the system settings from the backup files. Select one to restore Note: 1, To restore the system settings, user has to enter the Master Password in the System&Link. 2, All the passwords will be reset to the factory default after the restoration. 3, After restoration all the event records will be cleared. 4, All the Remote Controllers have to be enrolled again after restoration. * Don t care the error message shown on the screen when enrolling the Remote Controllers. * Test the Remote Controllers after the enrollment and make sure they can work properly.

15 Appendix A: CM1 control with PSW needed/ unneeded and their access right on LS-30 G/G: Read Good/ Set Good. G/F: Read Good/ Set Fail. F/G: Read Fail/ Set Good F/F: Read Fail/ Set Fail Function CM1 Control PSW needed PSW unneeded PSW using User/Installer Master CMS1 CMS2 Master no Control peration Mode G/G G/F G/F X-10 G/G G/F G/F Hand free Dial G F F Hand free Disconnect G F F Clear Status G F F Device Test G F F Relay Control Close G F F G Relay Control pen G F F Message ut G G G D Partial Arm G/G G/F G/F CM1 Control/ PSW G/G G/F G/F Check Event Log G G G Device Status G G G Telephone Num G G G Date/Time G G G User Password G/G F/F F/F F/F Door Bell G/G G/F G/F Voice Play back F G G G G Special Sensor Reading A G G G Install Timer I L D Date/time Adjust G/G G/F G/F Entry Delay G/G G/F G/F Exit Delay G/G G/F G/F Inner Siren G/F G/F G/F Relay Action Time G/F G/F G/F Sensor Supv. Time G/F G/F G/F Remote Siren Time G/F G/F G/F Telephone Number G/F G/F G/F Dial Mode G/F G/F G/F Auto Answer Ring Count G/F G/F G/F Line Cut Detection G/F G/F G/F Cease Dialing Mode G/F G/F G/F Telephone Ringer G/F G/F G/F Dial Tone Check G/F G/F G/F Sound Record F F F Play back G G G Entry delay beep G/F G/F G/F Alarm Warning G/F G/F G/F Device Enroll Device F F F Change Device Settings G/F G/F G/F Delete Device F F F Remote Registration F F F Wire Sensor Input G/F G/F G/F Siren Inner Siren G/F G/F G/F Mode Change Chirp G/F G/F G/F Tamper Siren In Disarm G/F G/F G/F Set Remote Siren G/F G/F G/F Siren/Relay Test G F F Switch G D

16 CMS Switch Type G/F G/F G/F X-10 House Code Switch Registration G/G G/F G/F G/F G/F G/F G Misc. RF Jamming Warning G/F G/F G/F D Rom Version G G G Reset to Factory Default F F F Emergency Button G/F G/F G/F Assignment Inactivity Function G/F G/F G/F #16 SW Control G/F G/F G/F Modem Ring Count G/F G/F G/F GSM Number G/F G/F G/F F CMS1 A CMS phone/account/gsm G/F F/F I Change Password L F F F F Mode Change Report G/F G/F Auto Link Check Period G/F G G/F Loop back Test F F 2-way Audio G/F G/F G DTMF data length G/F D G/F CMS Report G/F G/F Ethernet Report G/F G/F D GPRS Report G/F G/F IP Report Format G/F G/F CMS2 CMS phone/account/gsm G/F F/F Change Password F F F F Mode Change Report G/F G/F G D Auto Link Check Period G/F G/F Loop back Test F F 2-way Audio G/F G/F DTMF data length G/F G/F Schedule X-10 Switches G/G F/F F/F Auto peration G/G F/F F/F Switch Scene G/G F/F F/F peration Scene G/G F/F F/F Backup & Restore Backup G G G G G Restore G F F G F G D G D G D G D

Race Screen: Figure 2: Race Screen. Figure 3: Race Screen with Top Bulb Lock

Race Screen: Figure 2: Race Screen. Figure 3: Race Screen with Top Bulb Lock Eliminator Competition Stand Alone Mode - Instruction Manual Main Menu: After startup, the Eliminator Competition will enter the Main Menu. Press the right/left arrow buttons to move through the menu.

More information

XC2 Client/Server Installation & Configuration

XC2 Client/Server Installation & Configuration XC2 Client/Server Installation & Configuration File downloads Server Installation Backup Configuration Services Client Installation Backup Recovery Troubleshooting Aug 12 2014 XC2 Software, LLC Page 1

More information

AN-140. Protege WX SALLIS Integration Application Note

AN-140. Protege WX SALLIS Integration Application Note AN-140 Protege WX SALLIS Integration Application Note The specifications and descriptions of products and services contained in this document were correct at the time of printing. Integrated Control Technology

More information

Technology. In the My Files [My Files] submenu you can store all the programs that you have made on the NXT or downloaded from your computer.

Technology. In the My Files [My Files] submenu you can store all the programs that you have made on the NXT or downloaded from your computer. NXT Main Menu My Files Files are automatically placed into the appropriate folders. When you download a program using a Sound file to the NXT, the program will be placed under Software files while the

More information

FireHawk M7 Interface Module Software Instructions OPERATION AND INSTRUCTIONS

FireHawk M7 Interface Module Software Instructions OPERATION AND INSTRUCTIONS FireHawk M7 Interface Module Software Instructions OPERATION AND INSTRUCTIONS WARNING THE WARRANTIES MADE BY MSA WITH RESPECT TO THE PRODUCT ARE VOIDED IF THE PRODUCT IS NOT USED AND MAINTAINED IN ACCORDANCE

More information

uemis CONNECT: Synchronisation of the SDA with myuemis

uemis CONNECT: Synchronisation of the SDA with myuemis uemis CONNECT: Synchronisation of the SDA with myuemis 1 What is myuemis? In myuemis, your private area on the Internet portal www.uemis.com, you can visualise your dives, manage your database and transfer

More information

ELIMINATOR COMPETITION DRAG RACE Program Manual Firm Ver 4.11

ELIMINATOR COMPETITION DRAG RACE Program Manual Firm Ver 4.11 ELIMINATOR COMPETITION DRAG RACE Program Manual Firm Ver 4.11 The Portatree Eliminator Super 2000 Competition Track Timer can be used with an IBM Compatible Personal Computer connected through Com Port

More information

AGW SYSTEMS. Blue Clock W38X

AGW SYSTEMS. Blue Clock W38X AGW SYSTEMS Blue Clock W38X Contents table BLUECLOCKS...3 THE EVOLUTION...4 WHAT S NEW!...5 HARDWARE...6 SOFTWARE...7 MULTI COMPANY...8 INSTANTLY...9 EVEN MORE!...10 WHAT S INSIDE HOW DOES IT WORK...11...12

More information

SVEA II GSM Connector User Manual

SVEA II GSM Connector User Manual www.possio.com SVEA II GSM Connector User Manual 1. Introduction Before using SVEA II please read this manual carefully and keep it for future reference. SVEA II GSM Connector is a device for realization

More information

ALGE DIVE! ALGE. ALGE-TIMING GmbH & Co

ALGE DIVE! ALGE. ALGE-TIMING GmbH & Co ALGE ALGE DIVE! ALGE-TIMING GmbH & Co Rotkreuzstrasse 39 A-6890 Lustenau Telephone: +43 5577-85969 Fax: +43 5577-85969 e-mail: office@alge-timing.com Internet: www.alge-timing.com Table of contents 1.

More information

Instruction Manual. BZ7002 Calibration Software BE

Instruction Manual. BZ7002 Calibration Software BE Instruction Manual BZ7002 Calibration Software BE6034-12 Index _ Index Index... 2 Chapter 1 BZ7002 Calibration Software... 4 1. Introduction... 5 Chapter 2 Installation of the BZ7002... 6 2. Installation

More information

RM-80 respiration monitor

RM-80 respiration monitor RM-80 respiration monitor User Manual September 18, 2015 0025-003M 950 North Hague Avenue Columbus, Ohio 43204-2121 USA Sales: sales@colinst.com Service: service@colinst.com Phone: (614) 276-0861 Fax:

More information

MP15 Jockey Pump Controller

MP15 Jockey Pump Controller Setup and Operating Instructions MP15 Jockey Pump Controller This manual provides general information, installation, operation, maintenance, and system setup information for Metron Model MP15 Jockey Pump

More information

Technology. In the My Files [My Files] submenu you can store all the programs that you have made on the NXT or downloaded from your computer.

Technology. In the My Files [My Files] submenu you can store all the programs that you have made on the NXT or downloaded from your computer. My Files Files are automatically placed into the appropriate folders. When you download a program using a Sound file to the NXT, the program will be placed under Software files while the sound data will

More information

Mapping a Magnetic Field. Evaluation copy. Figure 1: Detecting the magnetic field around a bar magnet

Mapping a Magnetic Field. Evaluation copy. Figure 1: Detecting the magnetic field around a bar magnet Mapping a Magnetic Field Experiment 16 The region around a magnet where magnetic forces can be detected is called a magnetic field. All magnets, no matter what their shape, have two poles labeled north

More information

Fencing Time Version 4.3

Fencing Time Version 4.3 Fencing Time Version 4.3 Upgrading your Fencing Time Server October 2017 Copyright 2017 by Fencing Time, LLC. All rights reserved. Overview Periodically, a new version of Fencing Time is released. In most

More information

HPICAL Operation & Data Logging Procedures. Click spacebar to advance through slides 1

HPICAL Operation & Data Logging Procedures. Click spacebar to advance through slides 1 HPICAL-15000 Operation & Data Logging Procedures Click spacebar to advance through slides 1 WARNING Always wear proper safety equipment when using high pressure equipment. Do not exceed 125 psi air pressure.

More information

DANAGE TIMER System Controller User Manual

DANAGE TIMER System Controller User Manual DANAGE TIMER System Controller User Manual The SCORING System is also part of the concept Rev.: 05.10.2011 DANAGE of Scandinavia - Industrivej 13-6310 Broager - Denmark Tel.: +45 74 44 26 36, Fax: + 45

More information

Wickets Administrator

Wickets Administrator Wickets Administrator Software For Managing Stored Value Wickets 01/08/2008 Product Details And Operating Instructions Overview This page describes each major function of Wickets Administrator in detail.

More information

DIVE MEET SCORING INSTRUCTIONS. Day before meet

DIVE MEET SCORING INSTRUCTIONS. Day before meet DIVE MEET SCORING INSTRUCTIONS Day before meet Physical set up Set up registration/scoring table #1 on 1 meter side and scoring table #2 on 3 meter side of diving well, judges chairs, and award stand as

More information

AIR FLOW ANEMOMETER INSTRUCTION MANUAL

AIR FLOW ANEMOMETER INSTRUCTION MANUAL AIR FLOW ANEMOMETER INSTRUCTION MANUAL Thank you for purchasing our company Air Flow Anemometer. This manual provides relative information on how to use the Air Anemometer and warning in operation Please

More information

Using the Lego NXT with Labview.

Using the Lego NXT with Labview. Using the Lego NXT with Labview http://www.legoengineering.com/component/content/article/105 The Lego NXT 32-bit ARM microcontroller - an Atmel AT91SAM7S256. Flash memory/file system (256 kb), RAM (64

More information

Soft Systems. Log Flume - 1. Enter Specification. Activity One ACTIVITIES. Help. for Logicator

Soft Systems. Log Flume - 1. Enter Specification. Activity One ACTIVITIES. Help. for Logicator Log Flume - 1 ACTIVITIES These sheets present a series of activities for building your own programs to control the Log Flume Soft System. Together, they build into a complete control system for the log

More information

Drag racing system HL190 User Manual and installation guide

Drag racing system HL190 User Manual and installation guide Drag racing system HL190 User Manual and installation guide Version 10/2015 TAG Heuer Timing Page 1 / 14 1. Global This software controls the whole Drag racing installation HL190. Combined with the Chronelec

More information

Product Overview. Product Description CHAPTER

Product Overview. Product Description CHAPTER CHAPTER 1 This chapter provides a functional overview of the Cisco Redundant Power System 2300 and covers these topics: Product Description, page 1-1 Features, page 1-3 Supported Devices, page 1-4 Deployment

More information

Inspection User Manual

Inspection User Manual 2016 TABLE OF CONTENTS Inspection User Manual This application allows you to easily inspect equipment located in Onix Work. Onix AS Version 1.0.15.0 03.06.2016 0 P a g e TABLE OF CONTENTS TABLE OF CONTENTS

More information

[CROSS COUNTRY SCORING]

[CROSS COUNTRY SCORING] 2015 The Race Director Guide [CROSS COUNTRY SCORING] This document describes the setup and scoring processes employed when scoring a cross country race with Race Director. Contents Intro... 3 Division

More information

Operating Manual. SUPREMA Calibration. Software for Fire and Gas Warning Units. Order No.: /01. MSAsafety.com

Operating Manual. SUPREMA Calibration. Software for Fire and Gas Warning Units. Order No.: /01. MSAsafety.com Operating Manual Software for Fire and Gas Warning Units Order No.: 10154656/01 MSAsafety.com MSA Europe GmbH Schlüsselstrasse 12 8645 Rapperswil-Jona Switzerland info.ch@msasafety.com www.msasafety.com

More information

STAND alone & p.c. VERSION

STAND alone & p.c. VERSION STAND alone & p.c. VERSION ECONOMY TRACK SYSTEMS 1/4 & 1/8 Mile Asphalt Track Dirt / Sand Track Mud Track Snowmobile Track R/C Car Track Custom Track Systems Timing to.001 Accuracy Time Slip Printer Optional

More information

Technology. Using Bluetooth

Technology. Using Bluetooth Bluetooth is a communication technology that makes it possible to send and receive data without using wires. Using the Bluetooth features, you can set up a wireless connection between your NXT and other

More information

Boyle s Law: Pressure-Volume Relationship in Gases

Boyle s Law: Pressure-Volume Relationship in Gases Boyle s Law: Pressure-Volume Relationship in Gases The primary objective of this experiment is to determine the relationship between the pressure and volume of a confined gas. The gas we will use is air,

More information

SWIM MEET MANAGER 5.0 NEW FEATURES

SWIM MEET MANAGER 5.0 NEW FEATURES SWIM MEET MANAGER 5.0 NEW FEATURES Updated January 24, 2014 1 ABOUT SWIMMING MEET MANAGER 5.0 MEET MANAGER 5.0 for ming (SWMM) is HY-TEK's 6th generation of Meet Management software. Provides the very

More information

System 6 Water Polo. For the System 6 Sports Timer Software User Guide. F872 Rev

System 6 Water Polo. For the System 6 Sports Timer Software User Guide. F872 Rev System 6 Water Polo For the System 6 Sports Timer Software User Guide F872 Rev. 20171114 Customer Service Department www.coloradotime.com Email: customerservice@coloradotime.com Phone: 970-667-1000 Toll

More information

SHIMADZU LC-10/20 PUMP

SHIMADZU LC-10/20 PUMP SHIMADZU LC-10/20 PUMP Clarity Control Module ENG Code/Rev.: M091/70C Date: 24.10.2017 Phone: +420 251 013 400 DataApex Ltd. Fax: +420 251 013 401 Petrzilkova 2583/13 clarity@dataapex.com 158 00 Prague

More information

TYPE DOSAODOR-D SOFTWARE FOR CONFIGURATION OF TYPE DOSAODOR-D ODORANT INJECTION SYSTEM

TYPE DOSAODOR-D SOFTWARE FOR CONFIGURATION OF TYPE DOSAODOR-D ODORANT INJECTION SYSTEM User Manual Type Dosaodor-D November 2009 TYPE DOSAODOR-D SOFTWARE FOR CONFIGURATION OF TYPE DOSAODOR-D ODORANT INJECTION SYSTEM Figure 1. ROCLINK 800 Odorizer System Software D103117X012 O.M.T. www.emersonprocess.com/regulators

More information

Technology. Using Bluetooth

Technology. Using Bluetooth Bluetooth is a communication technology that makes it possible to send and receive data without using wires. Using the Bluetooth features, you can set up a wireless connection between your NXT and other

More information

SCIENTIFIC DATA SYSTEMS, INC. Depth Tension Line Speed Panel. DTLS Manual

SCIENTIFIC DATA SYSTEMS, INC. Depth Tension Line Speed Panel. DTLS Manual SCIENTIFIC DATA SYSTEMS, INC. Depth Tension Line Speed Panel DTLS Manual This document contains proprietary information. Copyright 2015 Scientific Data Systems, Inc. All rights reserved. 1 Depth Tension

More information

OMNISPORT 2000 SWIMMING QUICK REFERENCE

OMNISPORT 2000 SWIMMING QUICK REFERENCE Before During After OMNISPORT 2000 SWIMMING QUICK REFERENCE 1. Confirm that the timer is reset. 2. Set the timer to the correct event and heat. The right LCD, line 2 displays E:(event) H:(heat) R:(round)

More information

[XACT INTEGRATION] The Race Director. Xact Integration

[XACT INTEGRATION] The Race Director. Xact Integration 2018 The Race Director Xact Integration [XACT INTEGRATION] This document describes the steps in using the direct integration that has been built between Race Director and Xact. There are three primary

More information

Inspection User Manual This application allows you to easily inspect equipment located in Onix Work.

Inspection User Manual This application allows you to easily inspect equipment located in Onix Work. 2016 TABLE OF CONTENTS Inspection User Manual This application allows you to easily inspect equipment located in Onix Work. Onix AS Version 1.0.15.0 03.06.2016 0 P a g e TABLE OF CONTENTS TABLE OF CONTENTS

More information

CONSOLE-320 ENGLISH. 230A: CONSOLE-320 with cable data output Item 230B: CONSOLE-320 with cable + wireless radio data output

CONSOLE-320 ENGLISH. 230A: CONSOLE-320 with cable data output Item 230B: CONSOLE-320 with cable + wireless radio data output CONSOLE-320 Item 230A: CONSOLE-320 with cable data output Item 230B: CONSOLE-320 with cable + wireless radio data output Table of contents 1. INTRODUCTION...2 1.1 Power supply...2 1.2 Connections...2 1.3

More information

CUSTOMER INFORMATION

CUSTOMER INFORMATION CUSTOMER INFORMATION COMPANY NAME & ADDRESS: CONTACT: PHONE: FAX: NOTES: DATE ENTERED: DATE MODIFIED: 05/2/28 11:10 A 11/5/2010 11:17 A COMMENTS 1: COMMENTS 2: Vista20P-9(IP) PROGRAMMING FORM Local programming

More information

Rcvr-Acct#: Date: May 3, :31 AM

Rcvr-Acct#: Date: May 3, :31 AM 32P1-5 PROGRAMMING FORM Local programming requires the use of a 2-line Alpha keypad connected to partition 1 keypad terminals on the control. NOTE: For UL installations, the system may be configured as

More information

Quick Start Guide. A. Hardware installation B. Software installation C. Start the software for the first time D. Do your first measurement

Quick Start Guide. A. Hardware installation B. Software installation C. Start the software for the first time D. Do your first measurement Quick Start Guide This Quick Start Guide describes the hardware and software installation process and the Measurement feature in a simple way. Please follow the sequence of the steps to avoid problems

More information

AX5000 Operational Manual

AX5000 Operational Manual MIYACHI AMERICA CORPORATION The World Leader in Hermetic Sealing Systems AX5000 Operational Manual 0 Document #107-00092-001 Dec, 2013 AX5000 Operational Manual Miyachi America Corporation 1820 S. Myrtle

More information

User Manual. Heads-Up Display (HUD) DiveCAN. Mechanical Button Version

User Manual. Heads-Up Display (HUD) DiveCAN. Mechanical Button Version User Manual Heads-Up Display (HUD) Mechanical Button Version DiveCAN Table of Contents 1. Introduction...4 1.1 Features...4 2. Physical Description...5 3. Reading the PPO2...6 3.1 Modified Smither s Code...7

More information

SDM-2012 Docking Station Standalone Configuration Operator s Manual

SDM-2012 Docking Station Standalone Configuration Operator s Manual SDM-2012 Docking Station Standalone Configuration Operator s Manual Part Number: 71-0254RK Revision: P5 Released: 10/5/12 www.rkiinstruments.com Warranty RKI Instruments, Inc. warrants gas alarm equipment

More information

Microsoft Windows Software Manual for FITstep Stream Version 4

Microsoft Windows Software Manual for FITstep Stream Version 4 Thank you for purchasing this product from Gopher. If you are not satisfied with any Gopher purchase for any reason at any time, contact us and we will replace the product, credit your account, or refund

More information

[CROSS COUNTRY SCORING]

[CROSS COUNTRY SCORING] 2018 The Race Director Guide [CROSS COUNTRY SCORING] This document describes the setup and scoring processes employed when scoring a cross country race with Race Director. Contents Intro... 3 Division

More information

Helium Level Measurement Unit

Helium Level Measurement Unit Helium Level Measurement Unit HLMU User Manual Version 002 The information in this manual may be altered without notice. BRUKER BIOSPIN accepts no responsibility for actions taken as a result of use of

More information

USER MANUAL. Intelligent Diagnostic Controller IDC24-A IDC24-AF IDC24-AFL IDC24-F IDP24-A * IDP24-AF * IDP24-AFL * IDP24-F * 1/73

USER MANUAL. Intelligent Diagnostic Controller IDC24-A IDC24-AF IDC24-AFL IDC24-F IDP24-A * IDP24-AF * IDP24-AFL * IDP24-F * 1/73 USER MANUAL Intelligent Diagnostic Controller IDC24-A IDC24-AF IDC24-AFL IDC24-F IDP24-A * IDP24-AF * IDP24-AFL * IDP24-F * *) Require software ID: DID-SW-001 1/73 Table of contents 1 General... 3 1.1

More information

APA software instruction manual

APA software instruction manual 1. Starting the program In order to start the control software for the APA device press APAxx shortcut located on the desktop of the supplied computer. XX corresponds to the current software version. When

More information

BUBBLER CONTROL SYSTEM

BUBBLER CONTROL SYSTEM BUBBLER CONTROL SYSTEM Description: The HDBCS is a fully automatic bubbler system, which does liquid level measurements in water and wastewater applications. It is a dual air compressor system with, air

More information

Oxygen Meter User Manual

Oxygen Meter User Manual Oxygen Meter User Manual Monday, July 23, 2007 1. Outline...2 2. Program...3 2.1. Environment for program execution...3 2.2. Installation...3 2.3. Un installation...3 2.4. USB driver installation...3 2.5.

More information

WF STEUERUNGSTECHNIK GMBH. INFORMATION and TECNICAL DESCRIPTION

WF STEUERUNGSTECHNIK GMBH. INFORMATION and TECNICAL DESCRIPTION 1 INFORMATION and TECNICAL DESCRIPTION 14 2 AIRLEADER Professional Compressor Management + Compressed Air Visualisation + Alarm Service Management + AIRLEADER - has been the effective answer for compressed

More information

Software Manual for FITstep Pro Version 2

Software Manual for FITstep Pro Version 2 Thank you for purchasing this product from Gopher. If you are not satisfied with any Gopher purchase for any reason at any time, contact us and we will replace the product, credit your account, or refund

More information

EasySas. The most advanced airlock electronics on the market. Recyclable product. Eco-design. Energy savings

EasySas. The most advanced airlock electronics on the market. Recyclable product. Eco-design. Energy savings EasySas The most advanced airlock electronics on the market Eco-design Energy savings Recyclable product ELECTRONIC AIRLOCK MANAGEMENT SkySas range UniSas range CompacSas range An electronic management

More information

FRDS GEN II SIMULATOR WORKBOOK

FRDS GEN II SIMULATOR WORKBOOK FRDS GEN II SIMULATOR WORKBOOK Trotter Control Inc 2015 Document# Revision Revised 9001-0038 FRDS GEN II Simulator Workbook E 02/15/2015 by DC FRDS GEN II Simulator Workbook This workbook is a follow-on

More information

Mac Software Manual for FITstep Pro Version 2

Mac Software Manual for FITstep Pro Version 2 Thank you for purchasing this product from Gopher. If you are not satisfied with any Gopher purchase for any reason at any time, contact us and we will replace the product, credit your account, or refund

More information

Access will be via the same Player Registration tab via the Player Registrations Officer role section.

Access will be via the same Player Registration tab via the Player Registrations Officer role section. The process for registering a player via the Whole Game System Portal requires input from the club, player, league, and in some instances the County FA. Once the league has confirmed the set-up process

More information

USER GUIDE USER GUIDE

USER GUIDE USER GUIDE 1 TABLE OF CONTENTS GETTING STARTED 2 Included in the box 2 Compatible smartphones 2 Accessories: 2 Download Mobitee and PIQ application 2 GET STARTED WITH MOBITEE AND PIQ 3 Create your Account and Login

More information

SENSAPHONE APPLICATION NOTE. Functions: C Programming, Pump Control, Data Logging

SENSAPHONE APPLICATION NOTE. Functions: C Programming, Pump Control, Data Logging SENSAPHONE APPLICATION NOTE Application: Pump Station Volumetric Flow Calculation Functions: C Programming, Pump Control, Data Logging Sensaphone Model: SCADA 3000 Who needs to perform Volumetric Flow

More information

Burner Management System DEMO Operating instructions

Burner Management System DEMO Operating instructions Burner Management System DEMO Operating instructions Burner Management System DEMO Operating Instructions Startup Summary - Normal startup is accomplished in four basic steps: 1. Leak Test a. Safety Valve

More information

LEGO Engineering Conferences ROBOLAB and MINDSTORMS Education Version 4.5 March 2008

LEGO Engineering Conferences ROBOLAB and MINDSTORMS Education Version 4.5 March 2008 LEGO Engineering Conferences ROBOLAB and MINDSTORMS Education Version 4.5 March 2008 NXT-G Program Book II: Intermediate Robotics Activities for use with the NXT 2008 Tufts Center for Engineering Education

More information

Previous Release Notes

Previous Release Notes Release Notes Shearwater Desktop 3.1.5 Support for NERD 2. Previous Release Notes Version 3.1.4 Improved Bluetooth Reliability with the initial connection. Bug Notes: dded software workaround to allow

More information

The ICC Duckworth-Lewis-Stern calculator. DLS Edition 2016

The ICC Duckworth-Lewis-Stern calculator. DLS Edition 2016 The ICC Duckworth-Lewis-Stern calculator DLS Edition 2016 (DLS2-2016) Installation and operating instructions Queries about program operation should be sent to: Steven.Stern@qut.edu.au 2016 International

More information

Setting Up the Ingenico isc250 Pinpad via USB

Setting Up the Ingenico isc250 Pinpad via USB One Blue Hill Plaza, 16 th Floor, PO Box 1546 Pearl River, NY 10965 1-800-PC-AMERICA, 1-800-722-6374 (Voice) 845-920-0800 (Fax) 845-920-0880 Setting Up the Ingenico isc250 Pinpad via USB The following

More information

In Response to a Planned Power Outage: PPMS EverCool II Shut Down and Re-start Procedure

In Response to a Planned Power Outage: PPMS EverCool II Shut Down and Re-start Procedure PPMS Service Note 1099-412 In Response to a Planned Power Outage: PPMS EverCool II Shut Down and Re-start Procedure Introduction: Loss of electricity to the PPMS EverCool II should not cause damage to

More information

PRODUCT MANUAL. Diver-Mobile for Android

PRODUCT MANUAL. Diver-Mobile for Android PRODUCT MANUAL Diver-Mobile for Android Contact details: Van Essen Instruments B.V. Van Essen Instruments - Canada Delftechpark 20 630 Riverbend Drive, Suite 100 2628 XH Delft Kitchener, ON, The Netherlands

More information

IBU3 Manual Addendum 1

IBU3 Manual Addendum 1 This addendum covers the follow items. Connection of airsoft micro switch Connection of Taigen airsoft recoil units Selecting airsoft mode Settings for clutch style gearboxes Motor enable selection Confirmation

More information

Center Command Version 3. Operations Manual

Center Command Version 3. Operations Manual Center Command Version 3 Operations Manual Version: July 26, 2010 Table of Contents OVERVIEW... 2 OVERVIEW OF COMPUTER SCORE CENTER COMMAND... 2 MAIN MENU FUNCTIONS (IF MODULES INSTALLED)... 3 CENTER

More information

*24 RF HOUSE ID CODE [00] 00 = Disable all wireless touchpad usage = using 5827 or 5827BD touchpad

*24 RF HOUSE ID CODE [00] 00 = Disable all wireless touchpad usage = using 5827 or 5827BD touchpad PROGRAMMING FORM Local programming requires the use of a 2-line Alpha keypad connected to partition 1 keypad terminals on the control. NOTE: For UL installations, the system may be configured as a single

More information

Panther 5 Acute Care Ventilator

Panther 5 Acute Care Ventilator 1 HIGHLIGHTS High performance and advanced features target the ICU environment Utilizes an internal blower with a specially designed flow control valve removing the need for using compressed air without

More information

Callaway upro Golf GPS. User Guide (v1.3) 2009 Callaway Golf Company

Callaway upro Golf GPS. User Guide (v1.3) 2009 Callaway Golf Company Callaway upro Golf GPS User Guide (v1.3) 2009 Callaway Golf Company Table of Contents 1 GETTING STARTED WITH THE CALLAWAY UPRO...3 1.1 UPRO OVERVIEW...3 1.2 SYSTEM REQUIREMENTS...5 1.3 CHARGING THE UPRO...6

More information

A4s Operation Manual

A4s Operation Manual A4s Operation Manual Safety Instruction Please read this manual carefully, also with related manual for the machinery before use the controller. For installing and operating the controller properly and

More information

Using the Sailwave Results Programme April 2016

Using the Sailwave Results Programme April 2016 Using the Sailwave Results Programme April 2016 Background In 2016 the club decide to move their results service to a programme called Sailwave. This is a very simple little piece of free software (you

More information

Getting Started with the LabVIEW Toolkit for LEGO MINDSTORMS NXT

Getting Started with the LabVIEW Toolkit for LEGO MINDSTORMS NXT Getting Started with the LabVIEW Toolkit for LEGO MINDSTORMS NXT Contents Overview...2 Mass Compiling...2 Building a LabVIEW VI that Runs on the NXT...3 Running a LabVIEW VI on the NXT...4 Building a LabVIEW

More information

Hydro-Control V User Guide

Hydro-Control V User Guide Hydro-Control V User Guide Hydronix Part no: HD0193 Version 2.3.0 Revision date: July 2006 1 COPYRIGHT Neither the whole or any part of the information contained in nor the product described in this documentation

More information

BVIS Beach Volleyball Information System

BVIS Beach Volleyball Information System BVIS Beach Volleyball Information System Developments in computer science over the past few years, together with technological innovation, has in turn stimulated the development of tailored software solutions

More information

KIV-SACS Safe automatic calibration system:

KIV-SACS Safe automatic calibration system: KIV-SACS Safe automatic calibration system: LOK: g:\prosjekter\calibration_system\kiv safe calibration system.doc Page: 1 of 14 Parts description:... 4 Wash extractors:... 6 Tunnel washers:... 5 Test valve:...

More information

SWS Option: Well Pressures. SWS Option: Stretch Correction (Corrected depth) SWS Option: MMD (Magnetic Marks Detection) ASEP Products

SWS Option: Well Pressures. SWS Option: Stretch Correction (Corrected depth) SWS Option: MMD (Magnetic Marks Detection) ASEP Products SWS Option: Well Pressures PART NUMBER L-8531039779 The SmartMonitor can simultaneously measure, display and record depth and up to four different well pressures (for example, Control Line Pressure, Tubing

More information

Roller AC Servo System

Roller AC Servo System Safely Instruction Roller AC Servo System HMI-15 User Manual Please read this manual carefully, also with related manual for the machinery before use the controller. For installing and operating the controller

More information

LX Compass module 3 Electronic compass device User manual

LX Compass module 3 Electronic compass device User manual LX Compass module 3 Electronic compass device User manual LX navigation d.o.o., Tkalska 10 SLO 3000 Celje, tel: + 386 3 490 46 70, fax: + 386 3 490 46 71 info@lxnavigation.si, http://www.lxnavigation.com

More information

Steltronic StelPad User Guide

Steltronic StelPad User Guide StelPad User Guide Steltronic StelPad User Guide Contents Contents... 1 About StelPad and its Features... 3 StelPad System Elements... 3 StelPad Computer Integration with Focus... 4 Enable Custom Graphic

More information

There are three types of station hunting in IPedge/VIPedge:

There are three types of station hunting in IPedge/VIPedge: IPedge/VIPedge Feature Desc. 10/4/12 OVERVIEW There are three types of station hunting in IPedge/VIPedge: 1. Serial 2. Circular 3. Distributed Serial hunting and circular hunting may optionally have a

More information

AHE58/59 AC Servo System

AHE58/59 AC Servo System AHE58/59 AC Servo System HMI-12 User Manual Safely INstruction Please read this manual carefully, also with related manual for the machine head before use. For perfect operation and safety, installing

More information

GN21 Frequently Asked Questions For Golfers

GN21 Frequently Asked Questions For Golfers Posting Scores (My Score Center) 1. Click on the Enter Score button to enter an adjusted gross score or click on the Enter Hole-By-Hole Score button to enter your score hole-by-hole. NOTE: to use the Game

More information

WELCOME TO THE REVOLUTION

WELCOME TO THE REVOLUTION USER GUIDE WELCOME TO THE REVOLUTION THANK YOU FOR CHOOSING THE GCQUAD We listened to what you wanted - and created the most accurate, versatile and game-enhancing ball and club analysis solution available

More information

D-Opto Dissolved Oxygen Sensor Operation Manual

D-Opto Dissolved Oxygen Sensor Operation Manual D-Opto Dissolved Oxygen Sensor Operation Manual Software version 2.6 Contents 1. Introduction..... 1 Optical Sensor Technology.... 1 Features...... 1 2. D-Opto Specifications. 2 Specifications... 2 3.

More information

Temperature Controller CC24-7 ULTRA USER S MANUAL Legion Dr. Mason, MI USA October 2010 Ph. (517) Fax (517)

Temperature Controller CC24-7 ULTRA USER S MANUAL Legion Dr. Mason, MI USA October 2010 Ph. (517) Fax (517) Temperature Controller USER S MANUAL Aerotech, Inc. FORM: QM1387 4215 Legion Dr. Mason, MI 48854-1036 USA October 2010 Ph. (517) 676-7070 Fax (517) 676-7078 FOR CUSTOMER USE Enter the serial number located

More information

FOOD INTAKE MONITOR. Hardware and Software User s Manual DOC-047 Rev 3.0. Copyright 2009 All Rights Reserved

FOOD INTAKE MONITOR. Hardware and Software User s Manual DOC-047 Rev 3.0. Copyright 2009 All Rights Reserved Hardware and Software User s Manual DOC-047 Rev 3.0 Copyright 2009 All Rights Reserved MED Associates, Inc. P.O. Box 319 St. Albans, Vermont 05478 www.med-associates.com - ii - TABLE OF CONTENTS Chapter

More information

A4 Operation Manual. Fig.1-1 Controller Socket Diagram

A4 Operation Manual. Fig.1-1 Controller Socket Diagram A4 Operation Manual Safety Instruction Please read this manual carefully, also with related manual for the machinery before use the controller. For installing and operating the controller properly and

More information

PLASMA ENHANCED CHEMICAL VAPOR DEPOSITION (PECVD) SOP OXFORD PLASMALAB SYSTEM 100

PLASMA ENHANCED CHEMICAL VAPOR DEPOSITION (PECVD) SOP OXFORD PLASMALAB SYSTEM 100 PLASMA ENHANCED CHEMICAL VAPOR DEPOSITION (PECVD) SOP OXFORD PLASMALAB SYSTEM 100 June 2013 Interface Overview. The Oxford software is divided into 5 main screens. 1) Pump Control page 2) Recipe page 3)

More information

Specifications and information are subject to change without notice. Up-to-date address information is available on our website.

Specifications and information are subject to change without notice. Up-to-date address information is available on our website. www.smar.com Specifications and information are subject to change without notice. Up-to-date address information is available on our website. web: www.smar.com/contactus.asp LD302 - AssetView HMI LD302

More information

KEM Scientific, Inc. Instruments for Science from Scientists

KEM Scientific, Inc. Instruments for Science from Scientists KEM Scientific, Inc. Instruments for Science from Scientists J-KEM Scientific, Inc. 6970 Olive Blvd. St. Louis, MO 63130 (314) 863-5536 Fax (314) 863-6070 E-Mail: jkem911@jkem.com Precision Vacuum Controller,

More information

A GUIDE TO THE LOOSE ENDS HOCKEY LEAGUE WEBSITE PAGE

A GUIDE TO THE LOOSE ENDS HOCKEY LEAGUE WEBSITE PAGE A GUIDE TO THE LOOSE ENDS HOCKEY LEAGUE WEBSITE PAGE 1 What Can Be Done Using The League Website: MAIN PAGE: From the main page, click on the man with the newspaper beneath the label News and Archives

More information

Introduction WELCOME TO LEGO MINDSTORMS EDUCATION

Introduction WELCOME TO LEGO MINDSTORMS EDUCATION NXT User Guide Introduction WELCOME TO LEGO MINDSTORMS EDUCATION LEGO MINDSTORMS Education is the next generation in educational robotics, enabling students to discover Science, Technology, Engineering

More information

Chapter 6. Gas Analyser Interface. Hanatech Co., Ltd.

Chapter 6. Gas Analyser Interface. Hanatech Co., Ltd. Gas Analyser Interface The interface between the scanner and the gas analyser is available between Gas analyzer and ULTRASCAN P1 scanner. HOST-PRO PC interface program is also necessary to add the real-time

More information

Inventory User Guide

Inventory User Guide Inventory User Guide User Guide ~ Table of Contents ~ Sign On/Select Facility Rates & Inventory Update Tee Times Load Tee Times AutoLoad Schedule Rate Fences Dashboards Revenue At Risk, Rounds & Revenue,

More information

UNITY 2 TM. Air Server Series 2 Operators Manual. Version 1.0. February 2008

UNITY 2 TM. Air Server Series 2 Operators Manual. Version 1.0. February 2008 UNITY 2 TM Air Server Series 2 Operators Manual Version 1.0 February 2008 1. Introduction to the Air Server Accessory for UNITY 2...2 1.1. Summary of Operation...2 2. Developing a UNITY 2-Air Server method

More information