Read through all the steps first before working on the camera. Make sure you know what to do.
|
|
- Angelica Jasmin Morrison
- 6 years ago
- Views:
Transcription
1 Step-by-step procedure to fix lack of contact in the end-of-travel switch of a D700 pop-up flash DISCLAIMER: PLEASE UNDERSTAND THAT IF YOU DECIDE TO FOLLOW THE INFORMATION PROVIDED BELOW YOU DO SO AT YOUR OWN RISK! FLASH TUBES OPERATE AT HIGH VOLTAGES AND THERE IS A RISK OF INJURY EVEN IF THE CAMERA HAS BEEN SWITCHED OFF AND THE BATTERIES REMOVED. IT CAN ALSO RESULT IN FAULTY OPERATION OF THE CAMERA BODY AND/OR DAMAGED PARTS AND COMPONENTS THEREOF, LEADING TO FURTHER AND COSTLY REPAIRS. IT WILL ALSO VOID THE MANUFACTURER'S WARRANTY. THE INFORMATION BELOW IS THEREFORE PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED AND FOR EDUCATIONAL PURPOSES ONLY. IN NO EVENT I SHALL BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY ARISING FROM, OUT OF OR IN CONNECTION WITH THE INFORMATION ON THIS PAGE. Now that the legal stuff is out of the way, you will need: Grounding strap, precision Philips screwdriver, precision flat head screwdriver, tweezers, pin/small clip. Read through all the steps first before working on the camera. Make sure you know what to do. Step 0: Switch off the camera body, remove any batteries, put the grounding strap on and connect it to a grounded object or grounding mat [follow the instructions provided with the strap] Step 1: Open the pop-up flash and remove the two screws underneath with a small screwdriver; Step 2: Remove the upper cover of the pop-up flash with care. The flash tube and
2 the wiring are not exposed. Do not touch the flash tube contacts or any exposed contacts, avoid touching the wiring; Step 3: Remove the retaining screw [that is in the position indicated by C (not visible in the picture)] that holds the spring [A] in place. Remove the spring taking care not to bend it out of shape. Remove the screw of both stoppers [B] and unhook them taking notice of proper mounting position for re-assembly later on. The shaft of the position switch is indicated by [C] this is where the spring retaining screw was.
3 Step 4: Carefully! disengage the arm of the lower case unit on the side of the diopter adjustment button by pulling it outwards. If you pull too much you might break the arm of the lower case unit and that will be the end of it! Step 5: Notice! that the shaft of the position switch has a tiny guiding tab near its base that matches the guide on the end of the lower case unit arm [look at the red squares in the picture]. There is only one position where the shaft fits into the end of the arm, if it not in the proper position for reassembly and you force it, the tab will be damaged and you risk damaging the electronics in the SB PCB inside! You have been warned! Step 6: Remove the collar [D, see pict above] with the edge of a plastic card or with an undone clip by pulling outward. The position switch is now free. Grab the shaft [E] with tweezers and slightly move and rotate it until you see the floating contacts on the other side [see Picture in Picture].
4 Step 7: Take the pin and bend the tip on a straight angle. Insert the tip underneath the contacts and pull them slightly towards you but don't bend them permanently. Do this to both contacts. Step 8: Re-assemble in reverse, i.e. place the collar in place first [Step 6] and engage the arm of the lower case unit into position making sure that the guide and tab are properly aligned [Step 5, Step 4]. Step 9: Important! Before putting the spring in place and the retaining screw, check that the opposite arm of the lower case unit has not disengaged from its collar with retaining tabs [see the red circles in the picture]. If it did you have to pull the collar outwards and keep it there while you gently push the end of the arm back into place [use the flat head screwdriver to keep the collar in place]. Check that the retaining tabs protrude from the hole at the end of the arm. This is a very important but time consuming step. It is essential if you don't want a wobbling pop-up flash that is only secured from 1 side.
5 Step 10: Place the string, then the retaining screw, tighten but don't over do it. Hook and re-attach the stoppers [remember the correct position] and place the upper cover making sure that no wiring gets stuck between the lower and upper cover [very important!]. Re-attach the 2 screws from step 1 and you are done. Step 10: Test the pop-up flash. If it works, fine, success. If it still doesn't work, it's better to take the camera to a Nikon repair facility. The steps to access the SB PCB inside [to check the wiring at the soldering points for e.g.] requires a lot more skill and considerable disassembly of the camera body. Have fun! Jorge Santos
MAINTENANCE PROCEDURE FOR X 650
MAINTENANCE PROCEDURE FOR X 650 X 650 25. juli 2005-1/6 MAINTENANCE PROCEDURE FOR X 650 2 ND STAGE WARNING: This maintenance procedure is only for appointed Scubapro technicians that completed a course
More informationThank you for purchasing your new Empire Reloader B Sound-Activated 3-Speed Paintball Hopper!
Thank you for purchasing your new Empire Reloader B Sound-Activated 3-Speed Paintball Hopper! Should you require any technical assistance on the use of this product, or if your product needs servicing,
More informationWritten By: Matt Newsom
PSP 300xc UMD Door Replacement Replace the UMD door for a PSP 300xc Written By: Matt Newsom ifixit CC BY-NC-SA www.ifixit.com Page 1 of 13 INTRODUCTION Has the UMD door on your PSP 3000c seen better days?
More informationPanasonic SA-PM17 CD Tray Cover Replacement
Panasonic SA-PM17 CD Tray Cover Replacement When the CD Tray Cover breaks, it's actually not necessary to replace for the device to work properly. But if you desire to do so for aesthetic reasons, this
More informationCHAPTER 5 REWIND STARTERS
GENERAL INFORMATION CHAPTER 5 REWIND S Rewind starters used on vertical shaft Tecumseh engines are top mount horizontal pull style or side mount vertical pull style. Horizontal shaft engines use side mounted
More informationWritten By: Matt Newsom
PSP 300xc Power Switch Board Replacement Replacing the power switch board for a PSP 300xc. Written By: Matt Newsom ifixit CC BY-NC-SA www.ifixit.com Page 1 of 11 INTRODUCTION Has the power switch broken
More informationCompact Triple Cabinet Outlet Station Model Installation and Operating Instructions
Compact Triple Cabinet Outlet Station Model 6258-1 Installation and Operating Instructions The Porter Compact Triple Outlet Station (6258-1) provides a quick, safe, and reliable method of connection to
More informationCompact Triple Cabinet Outlet Station Model B Installation and Operating Instructions
PORTER Parker Hannifin Corporation Porter Instrument Division 245 Township Line Rd. P.O. Box 907 Hatfield, PA 19440-0907 USA (215) 723-4000 / fax (215) 723-5106 Compact Triple Cabinet Outlet Station Model
More informationRemanufacturing Instructions HP 1320 Toner cartridge
HP 1320 Toner cartridge For, please call (800) 322-8992 OEM Reference Information OEM Product #: Q5949X OEM Yield: 6,000 pages @ 5% Coverage Fig. 1 1. To separate the cartridge sections, first remove the
More information3 Scotch-Weld Polyurethane Reactive Adhesive Applicator Replacement Part Installation Guide
3 Scotch-Weld Polyurethane Reactive Adhesive Applicator Replacement Part Installation Guide Description: AIR SUPPLY LINE KIT Product ID/Stock No.: 62-9895-0005-3 For use with: 3M Scotch-Weld Polyurethane
More informationUnderwater Housing for Canon G7X Mark II
Underwater Housing for Canon G7X Mark II Product Number 6146.08 Product Registration Please register your product at ikelite.com within 15 days of purchase. Our product registration database is the best
More informationORRA SPINNING REEL INSTRUCTION MANUAL (DRAFT)
ORRA SPINNING REEL INSTRUCTION MANUAL (DRAFT) a. Congratulations b. Pictures of Components c. Family Info d. How to Fill the Spool with Line e. Handle Assembly f. Anti-Reverse g. Drag Adjustment h. Reel
More informationCARDINAL SPINNING REEL INSTRUCTION MANUAL
CARDINAL SPINNING REEL INSTRUCTION MANUAL a. Congratulations b. Pictures of Components c. Family Info d. How to Fill the Spool with Line e. Handle Assembly f. Anti-Reverse g. Drag Adjustment h. Reel Function
More informationDISASSEMBLING & REASSEMBLING CARTRIDGE INSTALLING SEATPOST ON BIKE
INTRODUCTION BILL OF MATERIALS SPECIFICATIONS & TOOLS PROCEDURES DISASSEMBLING & REASSEMBLING CARTRIDGE INSTALLING SEATPOST ON BIKE OPERATION OF SEATPOST GIANT LIMITED WARRANTY 1 INTRODUCTION Congratulations
More informationRepairing Vizio VHT 510 Sound Bar Volume
Repairing Vizio VHT 510 Sound Bar Volume Indicator LED This is how I was able to repair a common issue where the blue led's for the volume indicator stop working. Written By: Johnny ifixit CC BY-NC-SA
More informationShimano Di2 Installation on S5
Installing Shimano Dura Ace Di2 Shifting Systems Note these instructions and pictures are for assembling the Shimano Dura Ace Di2 system (Internal Spec) on the Cervélo S5 frame. The Shimano Ultegra Di2
More informationPlease Do Not Return This Product To The Store!
MODEL NUMBER: GM000W - GAMEMAKER TORCH O W N E R ' S M A N U A L PLEASE READ AND FOLLOW THIS MANUAL IN ITS ENTIRETY BEFORE USE. DOING SO WILL PROVIDE HELPFUL HINTS THAT WILL AID IN GETTING MAXIMUM USE
More informationiphone 6 Full Display Assembly Replacement
iphone 6 Full Display Assembly Replacement INTRODUCTION Use this guide along with the Werx Repair Mat to replace the cracked or broken screen on your iphone 6. Follow Werx Repair Mat Steps 1,2,4 to disassemble.
More information600 / 600FC OWNER'S MANUAL
PROGRESSION 600 / 600FC OWNER'S MANUAL Issue 2 / Version E - Dec. 10, 1997 Copyright 1997 GAMMA Sports - All Rights Reserved PROGRESSION 600 / 600FC OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY
More informationQRPGuys Single Lever Mini Paddle
QRPGuys Single Lever Mini Paddle First, familiarize yourself with the parts and check for all the components. If a part is missing, please contact us and we will send one. You must use qrpguys.parts@gmail.com
More informationBMW Motorrad. Installation Instructions. BMW Motorrad Communications System for Schuberth C3
BMW Motorrad Installation Instructions BMW Motorrad Communications System for Schuberth C3 Order No. 01 29 2 219 831 BMW Motorrad 05/2011 Be sure to read these instructions carefully and completely before
More informationUnderwater Housing for Panasonic Lumix DMC-ZS60, DMC-TZ80
Underwater Housing for Panasonic Lumix DMC-ZS60, DMC-TZ80 Product Number 6170.60 Product Registration Please register your product at ikelite.com within 15 days of purchase. Our product registration database
More information602 STRINGING MACHINE OWNER'S MANUAL
PROGRESSION 602 STRINGING MACHINE OWNER'S MANUAL AL Issue 1- April 2000 Copyright 2000 GAMMA Sports - All Rights Reserved PROGRESSION 602 STRINGING MACHINE TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2...
More informationASG-SD2500 ASG-SD2500
ASG-SD2500 ASG-SD2500 Series Screwdrivers User s Guide Version 1.0.1 October, 2010 Page 1 ASG Precision Fastening ASG-SD2500 Series Screwdrivers User s Guide Version 1.0.1 Major Revision: October, 2010
More informationCZ52 Detail Strip, Disassembly, and Assembly Instructions Lonestar Fabrication & Design
CZ52 Detail Strip, Disassembly, and Assembly Instructions 2008 Lonestar Fabrication & Design These instructions may be freely distributed and copied providing this page is included, and providing they
More informationWritten By: pepe32290
PSP 2000 UMD Drive Replacement Written By: pepe32290 ifixit CC BY-NC-SA www.ifixit.com Page 1 of 12 INTRODUCTION Having trouble reading discs? This guide is for you! TOOLS: Phillips #00 Screwdriver (1)
More informationFT500GF Dat e Code: 2 - FT500GF - - MW Purchase Date: PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE. All Rights Reserved
We strive to ensure that our products are of the highest quality and free of manufacturing defects or missing parts. However, if you have any problems with your new product, D O NOT RETURN IT TO THE STORE,
More informationSyringe, Distribution Valve and Infusion Pump Removal/Replacement ATTENTION SYRINGE REPLACEMENT
ATTENTION SYRINGE REPLACEMENT Please read through the document completely before starting any repairs. Refer to the proper section in the service manual for complete removal and replacement procedures.
More informationSAFETY RULES WARNING: READ THESE SAFETY RULES & OPERATORS MANUAL BEFORE HANDLING YOUR FIREARM
SAFETY RULES WARNING: READ THESE SAFETY RULES & OPERATORS MANUAL BEFORE HANDLING YOUR FIREARM Never point a firearm at anyone and always keep the muzzle pointed in a safe direction. Always treat all firearms
More informationEZee Glider Manual. Tools needed for Assembly: Wrench (included) Philips Screwdriver (not included) Assembly Instructions
EZee Glider Manual Congratulations on your purchase of the EZee Glider! Your glider is designed for years of nearly carefree use by your child. These instructions include how to set up your glider and
More informationUser Instruction Manual
User Instruction Manual 4500 psi Air Compressor Ver 2, 1.18 Contents Parts Included...3 Assembly Instructions...3-5 Operation Instructions...6-7 Oil Change Intervals...8 Air Filter Replacement...9 Setting
More informationWritten By: Evan Noronha
Replace the home button, including the Touch ID fingerprint reader in an ipad Pro 12.9". Written By: Evan Noronha ifixit CC BY-NC-SA www.ifixit.com Page 1 of 27 INTRODUCTION Use this guide to replace the
More informationINSTALLING THE BOLT-IN-PLACE FOOTPLATE KIT (FIGURE 1)
Bolt-In-Place/Spring Button Assembly and Installation Instructions Kits No. 1110266 and 1121271 SAVE THESE INSTRUCTIONS NOTE: Check ALL parts for shipping damage. In case of shipping damage, DO NOT use.
More informationRepair instructions. Pivot bushing replacement. XL-AS10001RM-en-DE Rev B
Repair instructions Pivot bushing replacement XL-AS10001RM-en-DE Rev B Table of contents Table of contents 1 General information... 3 1.1 Safety information...3 1.2 Legal information...4 1.3 Order and
More informationLSA-BAWMBL. Wall-Mounted Boom Arm INSTRUCTIONS
LSA-BAWMBL Wall-Mounted Boom Arm INSTRUCTIONS 1 Precautions Do not exceed the maximum load capacity. Always engage safety locks and devices where applicable. Product should be used between -22 F and 140
More informationLectric Cycles Mid-Drive Electric Motor Installation
Lectric Cycles Mid-Drive Electric Motor Installation This write-up describes the installation of a Lectric Cycles electric motor. The model is the e-rad Mid-Drive 750 Watt conversion kit, installed on
More informationRevolution Gurney Attachment
Revolution Gurney Attachment PART NUMBER: F-30RSA-S2 (2nd SERIES) WEIGHT CAPACITY: 350 POUNDS - STANDARD REVOLUTION 300 POUNDS - DEEP DRAFT REVOLUTION MANDATORY LEAVE THIS MANUAL WITH LIFT OWNER Read &
More informationBefore you start! Is iwalk 2.0 right for you?
Before you start! Is iwalk 2.0 right for you? Physical Abilities Requirements 1. Stair Test Before your injury, could you easily walk up and down stairs at normal speed, without using the hand rail? 2.
More informationOWNER'S MANUAL. Copyright 2003 GAMMA - All Rights Reserved
OWNER'S MANUAL AL Issue 1 - December 2003 Copyright 2003 GAMMA - All Rights Reserved OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2... ASSEMBLY INSTRUCTIONS PAGE 4... MOUNTING THE RACQUET PAGE
More informationOPERATION MANUAL Please read this Operation Manual carefully before use, and file for future reference.
English Lubrication Free Air Turbine Handpiece with Water Spray OPERATION MANUAL Please read this Operation Manual carefully before use, and file for future reference. OM-T0286E 001 Thank you for purchasing
More informationOWNER'S MANUAL. Copyright 1999 ATS - All Rights Reserved
OWNER'S MANUAL AL Issue 2 - August 19, 1999 Copyright 1999 ATS - All Rights Reserved OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2... ASSEMBLY INSTRUCTIONS PAGE 4... MOUNTING THE RACQUET PAGE
More informationOWNERS MANUAL. Model Shown with optional Primary Mooring Cleats. Portable Mooring System SAFETY OPERATION MAINTENANCE PARTS
OWNERS MANUAL Model 2400 Shown with optional Primary Mooring Cleats. Portable Mooring System SAFETY OPERATION MAINTENANCE PARTS CAUTION: Before using your new Pier Tender, read rules for Safety, Operation,
More informationBasketball Instructions
Quality Family Games Basketball Instructions Model 752.69 Product Registration 752.69 08/14/14 Visit www.carrom.com to register your product to receive the latest product updates, special offers, and other
More informationASSEMBLY INSTRUCTIONS FOR THE SHOOTOUT HOOPS GAME
1 ASSEMBLY INSTRUCTIONS FOR THE SHOOTOUT HOOPS GAME Please keep these instructions for future reference. Adult assembly required. Tools / Parts required This product requires 3x AA batteries (not included).
More informationBooster Pump PB4-60 Replacement Kits
Booster Pump PB4-60 Replacement Kits FOR YOUR SAFETY - This product must be installed and serviced by a contractor who is licensed and qualified in pool equipment by the jurisdiction in which the product
More informationRemington 700. Disclaimer Limited Warranty Satisfaction Guarantee Installation Instructions
Remington 700 Disclaimer Limited Warranty Satisfaction Guarantee Installation Instructions WARNING: Failure to properly install your trigger and ensure proper safety functionality could result in an unsafe
More informationSterling Shotguns. Field and Target Models. Owner s Manual
Sterling Shotguns Field and Target Models Owner s Manual If you have any questions about the safe use of a Big Horn Armory firearm, call us at 307-586-3700 or write us at P.O. Box 940, Cody Wyoming 82414.
More informationA. TO PREPARE THE MACHINE FOR USE.
INSTRUCTION MANUAL FOR THE ML120 STRINGING MACHINE. CONTENTS: A. TO PREPARE THE MACHINE FOR USE. 1. The assembly of frame with console and tooltray. 2. Fixing the lever of the tension unit. 3. Putting
More informationASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS Ballpark Classics Baseball Game MLB Edition Figure B Read the instructions completely before beginning g assembly. You will need a Phillips screwdriver. 1. Remove the game from the
More informationChapter 2 Rigging. Cutting Wire Rope. Anchoring Wire Rope to Drum. Winding Wire Rope Onto Drum
Chapter 2 Rigging Cutting Wire Rope The wire rope must be tightly seized on both sides of the point where the wire rope will be cut, as shown in Figure 2-1. Seize the wire rope with either seizing wire
More informationUsing Dividing Plates with the Rotary Table
The premier source of parts and accessories for mini lathes and mini mills. Using Dividing Plates with the Rotary Table Dividing plates allow you to precisely divide a circle into a number of divisions
More informationInstallation Instructions
Installation Instructions COLONY SOFT 7.0 Single Control Lavatory Faucet with Speed Connect Drain Congratulations on purchasing your American Standard faucet with the Speed Connect drain, a feature found
More informationStandard. Standard. Venepuncture Arm. Light. Part No: Brown. Part No: Black. Part No: 00332
Setup Guide Standard Standard Light. Part No: 000 Brown. Part No: 00 Black. Part No: 00 Part No: 065-964 Issue, June 0 0 Limbs & Things For more skills training products visit limbsandthings.com Limbs
More informationSERVICE INSTRUCTIONS
SERVICE INSTRUCTIONS GEMINI BREATHABLE INFLATOR SR9000 INTRODUCTION The instructions set forth in this document are intended to guide the experienced scuba equipment repair technician through the standard
More informationRead Instructions carefully before use. Rollator is designed for indoor & outdoor use. Do NOT use as a wheelchair or as a transport chair.
Charcoal Red Seat Height 500-10191 500-10195 19 500-10211 500-10215 21 500-10241 500-10245 24 User Manual Read Instructions carefully before use. Rollator is designed for indoor & outdoor use. Do NOT use
More informationECHO INSTRUCTION GUIDE WARNING STATEMENT & INSTRUCTIONS Thank you for your purchase of the Echo Trigger. This product should be used only after
ECHO INSTRUCTION GUIDE WARNING STATEMENT & INSTRUCTIONS Thank you for your purchase of the Echo Trigger. This product should be used only after reading and understanding these warnings and the instructions
More informationINFERNO 20-IN-1 MULTI-GAME TABLE ASSEMBLY INSTRUCTIONS
INFERNO 20-IN-1 MULTI-GAME TABLE ASSEMBLY INSTRUCTIONS NG1017M3 THANK YOU! Thank you for purchasing this product. We work around the clock and around the globe to ensure that our products maintain the
More informationDM-MARD (English) Dealer's Manual. ROAD MTB Trekking. City Touring/ Comfort Bike REAR DERAILLEUR XTR RD-M9100 RD-M9120
(English) DM-MARD001-00 Dealer's Manual ROAD MTB Trekking City Touring/ Comfort Bike URBAN SPORT E-BIKE REAR DERAILLEUR XTR RD-M9100 RD-M9120 CONTENTS CONTENTS...2 IMPORTANT NOTICE...3 TO ENSURE SAFETY...4
More informationOwner s Manual. Model H4685
Owner s Manual Model H4685 TABLE OF CONTENTS Important Information.................................... 3 Parts.................................................. 4 Battery Installation......................................
More information3M Liqui-Cel EXF-4x13 and 4x28 Series Membrane Contactors
Membrane Contactors 3M Liqui-Cel EXF-4x13 and 4x28 Series Membrane Contactors Assembly and Disassembly Instructions 3M.com/Liqui-Cel TABLE OF CONTENTS I. Safety and Warning 3 II. Assembly Parts 4 III.
More informationTrampoline Installation Instructions
Congratulations on purchasing an Oz Trampolines Product. Following are detailed setup instructions for your trampoline. Please ensure all boxes and parts are present before continuing. Setting Up Your
More informationSECTION 2 RING MOUNT
SECTION 2 RING MOUNT Rotax aircraft engines are manufactured and supported by Rotax GmbH of Austria. Read and understand the Rotax manuals completely before starting with the engine installation, as they
More informationItem # in1 Rotating Table. Inch BILLIARDS AIR HOCKEY TABLE TENNIS
Item # 45-6066 3-in1 Rotating Table 3 BILLIARDS AIR HOCKEY TABLE TENNIS 84 Inch ! WARNING: Rotating game should be done under adult supervision. Rotating table may cause a pinching hazard for young children
More informationGRAVITY BIKE RACK ASSEMBLY & OPERATING INSTRUCTIONS
GRAVITY BIKE RACK 94479 ASSEMBLY & OPERATING INSTRUCTIONS Due to continuing improvement, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA 93011
More informationAdapter Kit 5WAR RA NT Y. For use with EZ-Up Gravity Boots and select Teeter Inversion Tables* NEW! Assembly Instructions FULL YEAR
NEW! Follow along with your smartphone to make assembly even easier! Adapter Kit For use with EZ-Up Gravity Boots and select Teeter Inversion Tables* Assembly Instructions FULL YEAR 5WAR RA NT Y Specifications
More informationL-23 Super Blanik Rigging (assembly/disassembly) Guide Maj Carl Kerns
L-23 Super Blanik Rigging (assembly/disassembly) Guide Maj Carl Kerns The L-23 Blanik is a difficult Sailplane to rig (assemble). The wings are heavy and are secured via a single
More informationSCUBAPRO Repair Guide. S600-S550 Second Stages
SCUBAPRO Repair Guide S600-S550 Second Stages S600 Configuration A S600 Configuration B USE THIS GUIDE AS A REFERENCE WHEN SERVICING THE S600 AND S550 SECOND STAGES S550 P/N 41-047-000 FOR REPAIR OF S600-S550
More informationFalcon 3 145, 170, 195 and Tandem Owner / Service Manual
Falcon 3 145, 170, 195 and Tandem Owner / Service Manual January 2007 - Second Edition Removing The Sail From The Airframe And Short Packing The Glider Many maintenance and repair procedures will require
More informationTWIST-IN STEPPER SF-S0636 USER MANUAL
TWIST-IN STEPPER SF-S0636 USER MANUAL IMPORTANT! Please retain owner s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE
More informationStick Up Cam Battery
Stick Up Cam Battery 1. Charge and insert the battery. Remove the battery cover. Twist the battery cover counterclockwise to unlock, then remove it from your Stick Up Cam. Charge the provided battery.
More informationFinal Assembly Instructions Bikes with Threaded Headsets
Final Assembly Instructions Bikes with Threaded Headsets Thank you for buying your new bicycle from L.L.Bean. Read these instructions carefully before beginning the final assembly. Prior to shipping, our
More informationTECHNICAL DATA ZTR Model 312
DIXON INDUSTRIES. INC. A BLOUNT COMPANY AIRPORT INDUSTRIAL PARK PO BOX 1569 COFFEYVILLE KS 67337 0945 316 251 2000 FAX 316 251 4117 TECHNICAL DATA ZTR Model 312 IMPORTANT - READ OPERATOR'S MANUAL BEFORE
More informationMaintenance and Repair. AirHawk II Air Mask. Second Stage Regulator. Order No.: /02 Prnt. Spec (I) MSAsafety.
Maintenance and Repair Second Stage Regulator Order No.: 10104241/02 Prnt. Spec. 10000005389(I) MSAsafety.com WARNING! Read this manual carefully before servicing the device. The device will perform as
More information200 STRINGING MACHINE
200 STRINGING MACHINE OWNER S MANUAL Issue 1 - July 2010 Provided by www.gssalliance.com 200 OWNER S MANUAL TABLE OF CONTENTS WARRANTY...PAGE 2 FEATURES...PAGE 3 ASSEMBLY INSTRUCTIONS...PAGE 4 MOUNTING
More informationCOMPACT TRIPLE WALL OUTLET STATION MODEL INSTALLATION AND OPERATING INSTRUCTIONS
COMPACT TRIPLE WALL OUTLET STATION MODEL 6255-1 INSTALLATION AND OPERATING INSTRUCTIONS To assure safe operation and conformation to local fire codes, all Porter Outlet Stations are designed to be used
More informationUser Guide. Tripod. flowtech 75 / 100 Tripod. Part No. S S
User Guide flowtech 75 / 100 Tripod Tripod Part No. S2051-0001 S2052-0001 EN www.sachtler.com TM Copyright 2018 All rights reserved. Original Instructions: English All rights reserved throughout the world.
More informationHolden Grip-Lock TM Chock Inspection and Repair Standards: Procedure and Examples (April 2016)
Holden Grip-Lock TM Chock Inspection and Repair Standards: Procedure and Examples (April 2016) This document is the property of IL, LLC, and should only be used in connection with the Holden Grip-Lock
More information3M Liqui-Cel EXF-10x28 Series Membrane Contactor with ANSI or JIS Connections with Integrated End Caps
Membrane Contactors 3M Liqui-Cel EXF-10x28 Series Membrane Contactor with ANSI or JIS Connections with Integrated End Caps Assembly and Disassembly Instructions 3M.com/Liqui-Cel TABLE OF CONTENTS I. Safety
More information22-17 Partner. Owner s Manual. 624 Old Pacific Hwy SE Olympia, WA Tel (800) Fax (360) Available Rifle Kit
Available Rifle Kit Complete Upper Receiver Kit 624 Old Pacific Hwy SE Olympia, WA 98513 Tel (800) 228-3471 Fax (360) 491-3447 Owner s Manual 22-17 Partner Warnings & Operation Do not attempt to fire the
More informationFinal Assembly Instructions Bikes with Threaded Headsets
Final Assembly Instructions Bikes with Threaded Headsets Thank you for buying your new bicycle from L.L.Bean. Read these instructions carefully before beginning the final assembly. Prior to shipping, our
More informationOn the Go Swing System Instruction Manual
On the Go Swing System Instruction Manual WARNING READ ENTIRE MANUAL BEFORE USE. THIS SWING IS NOT A TOY. THIS SWING IS ONLY TO BE USED BY TRAINED PERSONNEL, SUCH AS AN OCCUPATIONAL THERAPIST, PHYSICAL
More informationNot a toy. Adult supervision required. Misuse or careless use may cause serious injury or death. May be dangerous up to 500 yards (457 meters).
Owner s manual www.umarex-usa.com CO2 repeater rifle cal..177 (4.5mm) pellet cal..22 (5.5mm) pellet Not a toy. Adult supervision required. Misuse or careless use may cause serious injury or death. May
More information9A5N Solid State CW Paddle
9A5N Solid State CW Paddle User manual Table of contents: 1. General description 2. Before you begin 3. Finger piece and/or battery installation 4. Interconnection 5. Lever(s) sensitivity adjustment 6.
More informationGrip-Lock Chock Repair Decision Instructions: Procedure and Examples (June 2013)
Grip-Lock Chock Repair Decision Instructions: Procedure and Examples (June 2013) A. Upperside Components All major plastic chock components, namely the Base, Platform, Flip-Face, Cover, Operating Lever
More informationSASK-A-POLE OWNERS AND USERS MANUAL
SASK-A-POLE OWNERS AND USERS MANUAL GENERAL INFORMATION The Saskatchewan Abilities Council s Sask-a-Pole accessibility and transfer aid is designed to help provide safe and easy access to chairs, beds,
More informationHATFIELD. Continuing the Tradition SEMI-AUTOMATIC SHOTGUN INSTRUCTION MANUAL
HATFIELD Continuing the Tradition SEMI-AUTOMATIC SHOTGUN INSTRUCTION MANUAL READ THE INSTRUCTIONS AND WARNINGS IN THIS MANUAL CAREFULLY BEFORE USING THIS FIREARM SAFETY HANDLING RULES 1.Always keep the
More informationPILOT PEDAL DRIVE INSTRUCTIONS
PILOT PEDAL DRIVE INSTRUCTIONS TABLE OF CONTENTS 1. INTRODUCTION 2. IMPORTANT SAFETY AND OPERATING INFORMATION 3. EQUIPMENT 3.1 Items Supplied 3.2 Tools Required 4. ASSEMBLY OF THE PEDAL DRIVE 4.1 Installing
More informationINSTALLATION INSTRUCTIONS
EDGEMERE CENTERSET LAVATORY FAUCET INSTALLATION INSTRUCTIONS 708.0 Thank you for selecting American Standard... the benchmark of fine quality for over 00 years. To ensure that your installation proceeds
More informationStandard. Bag & Stand Advanced Venepuncture Arm. Light. Part No: Brown. Part No: Black. Part No: 00442
Setup Guide Bag & Stand Advanced Standard Light. Part No: 00440 Brown. Part No: 0044 Black. Part No: 0044 Part No: 065-0 Issue, May 0 0 Limbs & Things For more skills training products visit limbsandthings.com
More informationAirPort Extreme A1521 Logic Board Replacement
AirPort Extreme A1521 Logic Board Replacement This guide shows how to remove the logic board from the internal structure and replace it. Written By: Keith Yu ifixit CC BY-NC-SA www.ifixit.com Page 1 of
More informationFinal Assembly Instructions Bikes with Quill Stems
Final Assembly Instructions Bikes with Quill Stems Thank you for buying your new bicycle from L.L.Bean. Read these instructions carefully before beginning the final assembly. Prior to shipping, our expert
More informationSPM INDOOR TRAINING CYCLE ASSEMBLY MANUAL MODEL: SPM
SPM INDOOR TRAINING CYCLE ASSEMBLY MANUAL MODEL: SPM Questions? As a quality exercise equipment supplier we are committed to your complete satisfaction. If you have questions, or find missing or damaged
More informationRS Important Notes. Contact. Bicycle Maintenance Stand instructions manual. Warranty Period : 1 year (from the date of your purchase)
Warranty Period : 1 year (from the date of your purchase) RS-1700 Bicycle Maintenance Stand instructions manual (ver.1.2 2016/12) For more details, read the attached "Minoura Limited Warranty Policy" card.
More informationM3-LED. Operator s Manual. Operator s Manual MADE IN THE USA USA
M3-LED Operator s Manual Operator s Manual MADE IN THE USA USA Section TABLE OF CONTENTS Page Warnings and Cautions... 1 M3-LED Parts Diagram... 4 Mounting... 6 Dismounting... 8 Switch Operation... 10
More informationUser s Manual. Model SWTC800. CAUTION: Adult Assembly Required
User s Manual Model SWTC800 CAUTION: Adult Assembly Required Model SWTC800...3...4...4...5...6.........8...9...10-11 Part Identification Chart... 12 Exploded Drawing and Parts List...13-14 Ordering Replacement
More informationCocoa Patio Pond with Lit Spillway
Cocoa Patio Pond with Lit Spillway REMINDER CALL 1-888-755-5641 BEFORE RETURNING TO STORE. PACKAGE CONTENTS ITEM # GQSPPB/GQSPPW Questions, problems, missing parts? Before returning to your retailer, call
More informationProduct Information News September 26, 2003
Product Information News September 26, 2003 LEVER HEIGHT INSPECTION FOR FIREHAWK MMR MSA is announcing a revision to the instructions for the Firehawk MMR Second Stage Regulator as they relate to the air
More informationAssembly Instructions. -Cantilever Boat Lifts
Assembly Instructions -Cantilever Boat Lifts Winch Instruction Page Safety Information 1. The winch is built for the multipurpose of hauling and lifting operations. It is not to be used as a hoist for
More informationVERSA BIKE RACK INSTRUCTIONS
VERSA BIKE RACK INSTRUCTIONS Models #8, 8 Important This rack is designed for use with a or. receiver hitch. The rack is designed to hold a maximum of two bicycles. Do not use it for anything other than
More informationZEV// SINGLE STAGE RIFLE TRIGGER (SSR)
NON FACTORY INSTALLATION INSTRUCTIONS WARNING Zero liability is expressed or implied for damage, injury, or death resulting from the improper installation or use/misuse of this product. It is strongly
More information