Deep Linear shoring. E+S Trench shoring systems / Sliding rail systems. Deep Linear shoring
|
|
- Sherman Owens
- 6 years ago
- Views:
Transcription
1 E+S Trench shoring systems / Sliding rail systems Deep Linear shoring Deep Linear shoring Module length Length slide rail Panel height Pipe culvert height m - m variabel 1,32 m / 2,32 m variabel The deep linear shoring is a further development of the known powerful linear shoring where two units of linear trench support are connected with each other. When finally installed, the two supporting modules, the components of which are of the same length, complement each other, dealing independently with the pressure of the soil, while ensuring the required enormous excavation of around 14 m which can be reached using this method. Due to its high performance, this new method constitutes a really big step forward in shoring technology. The scope of application of this new shoring method are deeper building pits for sewer line construction, shafts and press pits up to a depth of 14 m, depending on the surface properties. With extremely poor, cohesive and sticky grounds with great friction forces to be overcome between the individual shoring elements and the ascending ground, application of this newly developed deeper linear shoring can be economic already for depths ranging from 7 to 10 m since, here, deployment of a traditional linear shoring especially its demolition can be exhausting and time-consuming due to the high friction forces involved. E+S Trench shoring systems / Sliding rail systems 1
2 I Linear shoring support II Linear shoring boogie car III Base panel IV Top panel l M Module length l c Pipe culvert length Deep Linear shoring (All dimensions in mm) b A b I b c h c t pl Shoring / trench width (outer rail) Shoring / trench width (inner rail) Inner width Pipe culvert height Thickness 2 E+S Trench shoring systems / Sliding rail systems
3 ,13 7, , , , ,13 7, , , ,0 Linear shoring boogie car Linear shoring boogie car (Deep linear shoring) 2,20 505,0 Base panel -outside- (Height 2,32 m) t p 540,0 670,0 755,0 865,0 985, , , ,0 4,64 6,29 7,31 8,70 9,28 9,86 11,60 1 Top panel -outside- (Height 1,32 m) t p 365,0 450,0 510,0 580,0 640,0 900, , ,0 2,64 3,58 4,16 4,95 5,28 5,61 6,60 8,25 Top panel -outside- (Height 2,30 m) Base panels -inside- (height 2.32 m) , , t p t p 1.700,0 516,0 650,0 730,0 840,0 965, ,0 11,50 4,38 6,03 7,05 8,44 9,02 9,58 E+S Trench shoring systems / Sliding rail systems 3
4 Base panels -inside- (height 2.32 m) (contd.) ,89 t p 1.505, ,0 11,34 14,22 Top panels -inside- (height 1.32 m) ,89 3,04 4,89 t p 355,0 445,0 500,0 570,0 635,0 870, , ,0 2,49 3,43 4,01 4,80 5,13 5,45 6,45 8,09 Top panels -inside- (height 2.30 m) ,89 3,04 t p 530,0 660,0 740,0 845,0 975, ,0 4,35 5,98 6,99 8,37 8,95 9,50 Extension bars for deep Linear shoring roller unit ,140 0,275 0,350 0,375 0,412 0,550 1,100 1,650 2,200 38,0 50,0 55,0 57,0 60,0 70,0 110,0 152,0 192,0 Extension bars , TLV, hydraulically adjustable 0,640 0,412-0,530 75,0 156,0 4 E+S Trench shoring systems / Sliding rail systems
5 Trench widths Length of extension bar without extension bar 0,275 0,550 1,100 1,650 2,200 b c 0,900 1,175 1, ,550 3,100 b I 1,540 1,815 2,090 2,640 3,190 3,740 Other trench widths possible by combining different extension bar lengths. Larger trench widths available on request. b A 2,180 2,455 2,730 3,280 3,830 4,380 Accessories / Spares IA 0150F IA 0210F IB 0470F IB 0614F HE 0050 F HE 0060F Adapter for DKU piling frame, corner shoring, h = 0.50 m KDIV Adapter for DKU piling frame, corner shoring, h = 0.50 m KDVI Adapter for DKU piling frame, corner shoring, h = 1.00 m KDVI Adapter for DKU piling frame, h = 0.50 m KDVI (single slide rail, Adapter for DKU piling frame, h = 1.00 m KDIV (single slide rail, Adapter for DKU piling frame, h = 1.00 m KDVI (single slide rail) Adapter for EGS / DGS (LV) Bearing claw for DKU piling frame element Connector Cover panel for in-situ concrete DG -base panel- Cover plate for in-situ concrete DG -top plate- DKU piling frame guide frame DKU piling frame guide frame Nut M 24 Nut M 36 Pin Pin (for connector) Pin for roller unit (deep Linear shoring) Pin, Linear shoring (double slide rail) Pin, Linear shoring (single slide rail) Pressure beam (boxes, slide rail) Pressure beam (boxes, slide rail) Pressure plate for boogie car Pull adapter double slide rail Pull adapter single slide rail Screw M 24 x 80 Screw M 36 x 80 Spring cotter 6 mm Spring cotter 8 mm Suspension chain KL-13-8 Waling for DKU piling frame, module length 2.84 m (single slide rail, Waling for DKU piling frame, module length 3.88 m (single slide rail, 0,750 1,000 2,27 3, ,300 0,300 4,60 5,80 1,60 2,35 2, ,0 55,0 94,0 45,0 40,0 75,5 105,0 40,0 6,9 7,9 9,9 105,0 175,0 0,1 0,4 1,4 0,8 4,6 3,2 2,5 425,0 525,0 175,5 236,0 271,0 318,0 12,4 43,6 30,8 0,4 1,0 0,03 0,1 25,7 300,0 402,0 d 0,035 0,035 0,05 0,04 0,006 0,008 Standard DIN 934 DIN 934 DIN 933 DIN 933 DIN DIN E+S Trench shoring systems / Sliding rail systems 5
6 Accessories / Spares (contd.) Waling for DKU piling frame, module length 4.13 m (single slide rail, Waling for DKU piling frame, module length 4.38 m (single slide rail, 420,0 445,0 d Standard l b A b I Length Shoring / trench width (outer rail) Shoring / trench width (inner rail) b c G Inner width Weight The details of length of pipe opening l c refer to the rectangular roller unit. 6 E+S Trench shoring systems / Sliding rail systems
Single slide rail system Linear shoring
E+S Trench shoring systems / Sliding rail systems Single slide rail system Linear shoring Single-rail linear shoring with U-type and rectangular roller unit Module length Length slide rail Panel height
More informationUniversal DKU piling frame element
Shoring length Height sheet pile element Pipe culvert length Application depth 2,27 m / 3,81 m 1,00 m max. 3,35 m variable The universal shoring method The DKU piling frame element is a low-deformation,
More informationKS 100. Krings Trench shoring systems / Endsupported compact shoring systems KS 100
Krings Trench shoring systems / Endsupported compact shoring systems KS 100 KS 100 Shoring ength Height ase unit Height top unit Pipe cuvert height Weight m 4,50 m m / m m max. m 1399 kg 2715 kg The KS
More informationProduct Range Trench Shoring.
Materials Services Infrastructure Product Range Trench Shoring. Shoring systems from Emunds+Staudinger KRINGS. 2 Contents Contents 04 10 E+S trench shoring systems KRINGS trench shoring systems 04 Linear
More informationThyssenKrupp Bauservice
Global specialist for trench shoring systems Agenda 1. The company 2. Security in and around the trench 3. Evolution of trench shoring 4. E+S linear shoring system 5. Product development Deep linear shoring
More informationInstructions for use. Edge-supported shoring units Krings.
. Instructions for use Edgesupported shoring units Krings www.esverau.com Tale of contents System overview...3 Occupational safety and general remarks according to DIN EN 133311/2...5 Technical data sheet
More informationInstructions for use. Edge-supported shoring units E+S.
Instructions for use Edgesupported shoring units E+S wwwesveraucom Tale of contents System overview3 Occupational safety and general remarks according to DIN EN 133311/25 Technical data sheet edgesupported
More informationOPERATING MANUAL. SINGLE SLIDE RAIL RS Series 790
OPERATING MANUAL SINGLE SLIDE RAIL RS Series 790 Manufacturer: SBH Tiefbautechnik GmbH Ferdinand-Porsche-Str. 8 D 52525 HEINSBERG Phone: +49 (0) 24 52 / 91 04 0 Fax: +49 (0) 24 52 / 91 04 50 E-mail: info@sbh-tiefbautechnik.com
More informationP R I M A X. The Most Advanced Shoring Devices SAFER - FASTER - DEEPER - CHEAPER THE ULTIMATE SHORING TECHNIQUES ARE NOW ON YOUR HANDS
P R I M A X The Most Advanced Shoring Devices SAFER - FASTER - DEEPER - CHEAPER SLIDE RAIL SHORING ENGINEERING SLIDING STRUT SHORING TRENCH SHIELD SELF PROPELLED SHIELD CONSULTING SHORING DESIGN MANHOLE
More informationASSEMBLY AND OPERATING MANUAL LTW MAXI TRENCH BOX
Manufacturer: LTW Tiefbauvertriebs GmbH Holter Weg 11 D 41836 Hückelhoven-Brachelen Phone: +49 (0) 24 62 / 2009 0 Fax: +49 (0) 24 62 / 2009 15 e-mail: info@ltw-verbau.de homepage: http:\ \ www.ltw-shoring.com
More informationASSEMBLY AND OPERATING MANUAL LTW SHORING BOXES VB 100 & VB 120
Manufacturer: LTW Tiefbauvertriebs GmbH Holter Weg 11 D 41836 Hückelhoven-Brachelen Phone: +49 (0) 24 62 / 2009 0 Fax: +49 (0) 24 62 / 2009 15 e-mail: info@ltw-verbau.de homepage: http:\ \ www.ltw-shoring.com
More informationASSEMBLY AND OPERATING MANUAL LTW SHORING BOXES VB 60
Manufacturer: LTW Tiefbauvertriebs GmbH Holter Weg 11 D 41836 Hückelhoven-Brachelen Phone: +49 (0) 24 62 / 2009 0 Fax: +49 (0) 24 62 / 2009 15 e-mail: info@ ltw-verbau.de homepage: http:\ \ www.ltw-shoring.com
More informationAluminum Sheeting Guide (ASG)
Tabulated Data Aluminum Sheeting Guide (ASG) February 2016 Copyright, U.S.A.,Griswold Machine & Eng., 2016 594 Mendon Road, Union City, MI 49094 (800) 248 2054 Fax: (517) 741 7483 CAUTION EXCAVATION PROCEDURES
More information"STEEL FRAMED" ALUMINUM PANEL SHIELDS
"STEEL FRAMED" ALUMINUM PANEL SHIELDS MANUFACTURE S TABULATED DATA 3330 S. Sam Houston Pkwy Houston, Texas 77047 (713)943-0750 USA Toll Free 1-800-231-6662 Fax (713)943-8483 Www.speedshore.com PRINTED
More informationErsatzteilliste Spare parts list
VIBRO FLEX 00 Ersatzteilliste Spare parts list Liste di pièce de rechange Tab. Spare parts list / VIBRO FLEX 00. Date: 00,0 Fig. Serial no. Part no. Pieces Notes 00 Central frame 0 Frame cpl. VF 000 Frame
More informationSPEED SHORE MANUFACTURER S TABULATED DATA "MHS" MODELS. STEEL MANHOLE SHIELDS 4 Single Wall 4 Double Wall 4 Double Wall with Cut-Outs
SPEED SHORE MANUFACTURER S TABULATED DATA "MHS" MODELS STEEL MANHOLE SHIELDS 4 Single Wall 4 Double Wall 4 Double Wall with Cut-Outs January 01, 2005 3330 S. SAM HOUSTON PKWY E. HOUSTON, TEXAS 77047 Tel:
More informationPlummer Block Housings
Plummer Block Housings TECHNICAL INFORMATION Feature The majority of SLB Plummer Block Housing is made of Gray Cast Iron and is of the models of 'SN', 'SNU' and 'SAF'. Its basic size conforms with 'ISO'
More informationSmith Meter PD Meter Meter, PD Series, F4 S6, S7. Parts List Bulletin PO01012 Issue/Rev 0.0 (7/13)
Smith Meter PD Meter Meter, PD Series, F4 S6, S7 Parts List Bulletin PO01012 Issue/Rev 0.0 (7/13) 17 34 71 71 19 33 21 71 58 35 68 25 26 10 44 60 59 61 24 55 54 57 16 14 29 36 28 42 70 48 27 41 32 6 47
More informationSTEEL TRENCH SHIELDS DW MODELS
STEEL TRENCH SHIELDS DW MODELS 3330 S. SAM HOUSTON PKWY E. HOUSTON, TEXAS 77047 Phone: 713.943.0750 Toll Free: 800.231.6662 Fax: 713. 943.8483 COPYRIGHT, U.S.A., SPEED SHORE CORPORATION, 2009 April 16,
More informationCB 350. Spare parts list. Hydraulic concrete buster. CB 350 s/n DEQ Construction Tools GmbH No
CB 350 Spare parts list Hydraulic concrete buster CB 350 s/n DEQ179000-2018 Construction Tools GmbH No. 3390803501 2018-01-01 General information This spare parts list applies to the following: Part number
More informationSLIDE RAIL INSTALLATION GUIDE MANUFACTURE S TABULATED DATA
SLIDE RAIL INSTALLATION GUIDE MANUFACTURE S TABULATED DATA 3330 S. Sam Houston Pkwy Houston, Texas 77047 (713)943-0750 USA Toll Free 1-800-231-6662 Fax (713)943-8483 Www.speedshore.com PRINTED IN U.S.A.
More informationPrecision Escalator Products, Inc. O & K ESCALATORS TABLE OF CONTENTS
Precision Escalator Products, Inc. 147 North Michigan Avenue Kenilworth, New Jersey 07033 1-800-233-0838 IN NJ (908) 259-9009 FAX (908) 259-9013 O & K ESCALATORS TABLE OF CONTENTS COMB PLATES PAGE 2 ROLLERS
More informationParts Manual. Versa Hand Arm
Parts Manual Versa Hand Arm Insist Versa Hand To ensure u i our web site at www.labrieplus.com, or contact us at -800-23-277 USA or -877-83-8250 Canada twenty four hours a day. seven days a week. We are
More informationExtension Platform. Base Platform. Crossover. Exit railing. Exit Railing
Base Platform Galvanized With metal grate and two brackets Railing on the long side and a face side Extension Platform Galvanized With metal grate and one bracket Railing on the long side with rail connection
More informationSelf-Aligning Cylindrical Roller Bearings. Plummer Block Housing. Series ACB, sealed on both sides. Series SLG01
Self-Aligning Cylindrical Roller Bearings Series ACB, sealed on both sides Plummer Block Housing Series SLG01 KRW Self-Aligning Cylindrical Roller Bearings sealed on both sides ACB self-aligning cylindrical
More information3. Types of foundation
Foundation Engineering CE 48. Types of foundation & foundation materials Contents Introduction Shallow Foundations Deep Foundations Introduction Why different types of? General types of Introduction Why
More informationa division of Enviro Safety Products
www.minutemanvac.com, a division of Enviro Safety Products.800.637.6606 Chassis 3 4 5 3 4 6 7 8 5 0 0 6 8 0 7 4 3 5 6 7 E 7e www.minutemanvac.com, a division of Enviro Safety Products.800.637.6606 Page
More informationDesign Data 22M. Flotation of Circular Concrete Pipe. w w I = w - x 1000 (3) (SG x 1000)
Design Data M Flotation of Circular Concrete Pipe There are several installation conditions where there is the possibility that concrete pipe may float even though the density of concrete is approximately.4
More informationMeter, PD Series, E3 A1, S1 and E4 S1 Prior to 2005 Parts List
Issue/Rev. 0.0 (2/13) Meter, PD Series, E3 A1, S1 and E4 S1 Prior to 2005 Parts List Bulletin PO01001 33 Pre 1994 39 32 31 21 Pre 1994 45 18 48 44 30 78 57 46 Note: Angled housing not shown. The Most Trusted
More information10.2. Basketball Single Post System
Basketball Basketball Single Post System The single-post basketball stand is made with oval aluminium profiles with a cross-section of 120 x 100 mm. The wall thickness of this robust apparatus is 4 to
More informationOrder No Projection Backboard
Basketball Basketball Single Post System The single-post basketball stand is made with oval aluminium profiles with a cross-section of 120 x 100 mm. The wall thickness of this robust apparatus is 4 to
More informationParts Manual HEAVY DUTY RIGHT HAND ARM
Parts Manual HEAVY DUTY RIGHT HAND ARM Thank you for your purchase of a new Labrie. To ensure maximim reliability, on genuine replacement parts. Labrie Plus replacement parts are designed and manufactured
More informationHYDRAULIC PALLET TRUCKS. MODEL Nos: PT550BC, PT685BC, PT550NC, PT685NC OPERATION & MAINTENANCE INSTRUCTIONS
HYDRAULIC PALLET TRUCKS MODEL Nos: PT550BC, PT685BC, PT550NC, PT685NC OPERATION & MAINTENANCE INSTRUCTIONS 0711 WARNING! PT550NC MAXIMUM LOAD - 2000KG PT685NC MAXIMUM LOAD - 2000KG PT550BC MAXIMUM LOAD
More informationSPEED SHORE MANUFACTURER S TABULATED DATA MANGUARDS. October 31, 2005
SPEED SHORE MANUFACTURER S TABULATED DATA MANGUARDS October 31, 2005 3330 S. SAM HOUSTON PKWY E. HOUSTON, TEXAS 77047 Tel: (713) 943-0750 U.S.A. Toll Free: (800) 231-6662 Fax: (713) 943-8483 COPYRIGHT,
More informationSTEEL TRENCH SHIELDS TUFF-LITE MODELS
STEEL TRENCH SHIELDS TUFF-LITE MODELS 3330 S. SAM HOUSTON PKWY E. HOUSTON, TEXAS 77047 Phone: 713.943.0750 Toll Free: 800.231.6662 Fax: 713. 943.8483 April 16, 2009 TRENCH SHIELDS TUFF-LITE TM Page 2 of
More informationTabulated Data Lite-Shield 20 System
Tabulated Data Lite-Shield 20 System November, 2014 Copyright, U.S.A.,Griswold Machine & Eng., 2012 594 Mendon Road, Union City, MI 49094 (800) 248-2054 Fax: (517) 741-7483 CAUTION EXCAVATION PROCEDURES
More informationATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 1 of 52 A-ARM, FLOOR PANEL, AND BUMPER ASSEMBLY
2004 ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 1 of 52 A-ARM, FLOOR PANEL, AND BUMPER ASSEMBLY 2004 ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 2 of 52 A-ARM, FLOOR PANEL, AND BUMPER
More informationRiver Bridge - Test Shaft-1 Clarke County, MS, 4/2/2012
Page 1 of 9 The enclosed report contains the data and analysis summary for the SoniCaliper shaft caliper, performed at River Bridge (Test Shaft-1), Clarke County, MS on Monday, April 02, 2012 by Dave Jakstis.
More informationKey No. Description Part No.
ENGINE ASSEMBLY 45 319042 10 (SEE ENGINE MANUAL) ENGINE 12 SCREW, 5/16 18 710024 13 WASHER 120638 41 GUIDE, ROD BELT 3949 42 PLASTIC WASHER 6711 43 WASHER 120638 44 SCREW, 5/16 24X 1.00 910828 45 SPACER
More informationMeter, PD Series, E3 S1 and E4 S to Present Parts List
Issue/Rev. 0.0 (2/13) Meter, PD Series, E3 S1 and E4 S1 2005 to Present Parts List Bulletin PO01002 9 35 3 39 53 55 57 56 52 54 26 32 37 25 68 48 38 The Most Trusted Name In Measurement 5 31 7 44 42 16
More informationData Distribution Cabinets. Exclusive CD edition March 2006
Exclusive CD edition March 2006 Introduction: The development of distribution cabinets is the practical reply from KRONE to the ever increasing demands on the data, telephone, and network technology. Cost-effective,
More informationRemeha Quinta Cascade guide
Technical information Remeha Quinta Cascade guide Cascade guide Cascade systems 2 Remeha Quinta Cascade guide TABLE OF CONTENTS FOREWORD 4 1 GENERAL DESCRIPTION OF CASCADE SYSTEMS 4 1.1 Optimum number
More informationCHAIN LINK FENCE GATE
WALCOOM Walcoom Corporation CHAIN LINK FENCE GATE Chain link fence gate is a versatile product in many aspects, here, Walcoom provides buyers with sufficient strength and durability chain link fence gate
More informationSpecial square punch with flattened corners
Special square punch with flattened corners Mild steel (St37), plastic and aluminium to 2.0 Punching of burr-free openings 12.7 dia pilot drill 503102 Punch including punch, die, draw stud, counter nut
More informationbuilt build to TRENCHLINING DOWN A CAISSON
uilt build to TRENCHLINING DOWN A CAISSON TRENCHLINING Trenchlining_DOWN A CAISSON DOWN A CAISSON CHARACTERISTICS Base panel 315x230 (815 kg) and 415x230 (1018 kg). Super-elevation panel 315x120 (511
More informationSBU 220. Spare parts list. Hydraulic breakers. SBU 220 s/n BES Construction Tools PC AB No
SBU 220 Spare parts list Hydraulic breakers SBU 220 s/n BES090753 2018 Construction Tools PC AB No. 9800097101 2018-01 General information This spare parts list applies to the following: Part number Description
More informationSlide 1 / What is the density of an aluminum block with a mass of 4050 kg and volume of 1.5 m 3?
Slide 1 / 68 1 What is the density of an aluminum block with a mass of 4050 kg and volume of 1.5 m 3? Slide 2 / 68 2 What is the mass of a rectangular shaped ice block with dimensions of 0.04m x 0.05m
More informationSB 102. Spare parts list. Hydraulic breakers. SB 102 s/n BES Construction Tools PC AB No h
SB 102 Spare parts list Hydraulic breakers SB 102 s/n BES043603 2018 Construction Tools PC AB No. 9800064201h 2018-01 General information This spare parts list applies to the following: Part number 8460030030
More informationTYPES OF FOUNDATION. Superstructure. Substructure. Foundation
TYPES OF FOUNDATION Introduction: The lowest artificially built part of a structure which transmits the load of the structure to the soil lying underneath is called foundation. The supporting part of a
More informationInflatable Packer Single & Double. Single & Double Packer Dimension. Wireline Packer. Water Testing Packer (WTP) Packer
Inflatable Packer Single & Double Single & Double Packer Dimension Wireline Packer Water Testing Packer (WTP) Packer Packer Working Pressure & Depth Chart Packer Water Hand Pump Packer Air Driven Pump
More informationConstruction OS&H Working at or below ground level
Construction OS&H Working at or below ground level Summary Common hazards with working at or below ground level Common excavations Shafts and headings Demolition and contaminated sites Confined spaces
More informationDP Spare parts list. Demolition pulverizer. DP 2800 s/n DEQ Construction Tools GmbH No
DP 2800 Spare parts list Demolition pulverizer DP 2800 s/n DEQ139266-2018 Construction Tools GmbH No. 3390719501 2018-01-01 General information This spare parts list applies to the following: Part number
More informationUsing Dividing Plates with the Rotary Table
The premier source of parts and accessories for mini lathes and mini mills. Using Dividing Plates with the Rotary Table Dividing plates allow you to precisely divide a circle into a number of divisions
More informationMODULAR ALUMINUM PANEL SHIELDS MAPS
MODULAR ALUMINUM PANEL SHIELDS MAPS 3330 S. SAM HOUSTON PKWY E. HOUSTON, TEXAS 77047 Phone: 713.943.0750 Toll Free: 800.231.6662 Fax: 713. 943.8483 April 16, 2009 MODULAR ALUMINUM PANEL SHIELDS Page 2
More informationMeter, PD Series, E3 S6, S7 All Parts List
Issue/Rev. 0.0 (3/13) Meter, PD Series, E3 S6, S7 All Parts List Bulletin PO01005 32 68 29 17 68 16 14 19 15 68 20 54 22 18 24 58 23 10 59 41 31 56 55 57 47 52 25 27 34 34 26 40 67 44 39 The Most Trusted
More informationT Y P E V S A B M S E W A G E P U M P
Pe r fo r m a n ce C h a r t s 11 1 D R Y P I T S B U L L E T I N 2 3 9 8 7 6 5 4 3 2 1 12 11 1 / 4 1 1 / 2 9 3 / 4 9 5% 3 HP 5 HP 7 1/2 HP 1 HP 76% 5% C u r v e P a g e V S A B M - 4 1 1 5 R P M M O D
More informationMANUAL SEALLESS STEEL STRAPPING TOOL MODEL A
OPERATION MANUAL / SPARE PARTS LIST MANUAL SEALLESS STEEL STRAPPING TOOL MODEL A337.0001 13.1912.01 13191201.en/MAS/ 10.02 INDEX PAGE 1 SAFETY INSTRUCTIONS 2 2 WARRANTY CONDITIONS AND LIABILITY 4 3 APPROPRIATE
More informationITEM 400 STRUCTURAL EXCAVATION AND BACKFILL
AFTER MARCH 1, 2012 ITEM 400 STRUCTURAL EXCAVATION AND BACKFILL 400.1 Description. This item shall govern for all excavation required for the construction of all structures, except pipe or box sewers for
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description RP2300FC, RP2301FC Router CONCEPT AND MAIN APPLICATIONS Models RP2300FC and RP2301FC are upgraded sister tools of our current plunge-type electronic router Model
More informationDeveloped by Engineers Alex Klinger and Shelby Vrem November 2015
TRENCH RESCUE (1.1) Developed by Engineers Alex Klinger and Shelby Vrem November 2015 TASK SKILL DESCRIPTION AND DETAILS Task: To safely and effectively rescue a patient out of a trench environment. Mode
More informationIMPORTANT: RECEIVING INSTRUCTIONS:
Instruction Sheet Sidewinder Mechanical Bender IMPORTANT: RECEIVING INSTRUCTIONS: Visually inspect all components for shipping damage. If any shipping damage is found, notify carrier at once.shipping damage
More informationSB 152. Spare parts list. Hydraulic breakers. SB 152 s/n BES Construction Tools PC AB No
SB 152 Spare parts list Hydraulic breakers SB 152 s/n BES043707 2018 Construction Tools PC AB No. 9800041001 2018-01 General information This spare parts list applies to the following: Part number 8460030040
More informationQUICK START GUIDE CB-450 DATA BUOY PLATFORM
What s Included (1) Buoy hull with data well, 450 lb buoyancy (1) Buoy tower (3) 10W Solar panels (1) Data well lid (isic-cb or pass-through) (3) Top-side lifting eyes (3) Bottom-side mooring eyes (1)
More informationSB 452. Spare parts list. Hydraulic breakers. SB 452 s/n BES Construction Tools PC AB No h
SB 452 Spare parts list Hydraulic breakers SB 452 s/n BES043603 2018 Construction Tools PC AB No. 9800088701h 2018-01 General information This spare parts list applies to the following: Part number 8460030070
More informationF Fittings with 24 cone as per DIN EN ISO Fitting accessories, plug-type connectors, hydraulic pipes, pipe clamps, pressure gauges
Fittings with 24 cone as per DIN EN ISO 8434-1 Fitting accessories, plug-type connectors, hydraulic pipes, pipe clamps, pressure gauges Issue 8-17 E F 9.300 Advantages NNWorldwide spread high-pressure
More informationPACIFIC SHORING, LLC ALUMINUM SHORING PRODUCTS HEAVY DUTY HYDRAULIC WALER RAIL SYSTEM. TABULATED DATA Effective August 25, 2015
1 HEAVY DUTY HYDRAULIC WALER RAIL SYSTEM Effective August 25, 2015 PSH 265 Roberts Avenue Santa Rosa, Ca. 95407 (707) 575-9014 Construction Engineering Resource 1837 Wright Street Santa Rosa, Ca. 95404
More informationPACIFIC SHORING, LLC ALUMINUM SHORING PRODUCTS PSH HEAVY DUTY HYDRAULIC WALER RAIL SYSTEM. TABULATED DATA Effective December 10, 2013
1 HEAVY DUTY HYDRAULIC WALER RAIL SYSTEM Effective December 10, 2013 PSH 265 Roberts Avenue Santa Rosa, Ca. 95407 (707) 575-9014 Construction Engineering Resource 1837 Wright Street Santa Rosa, Ca. 95404
More information1.5 m. 2.4 m. Fig the pressure exerted by the oil on the base of the tank, the force exerted by the oil on the base of the tank.
1 Fig. 3.1 shows an oil tank that has a rectangular base of dimensions 2.4 m by 1.5 m. oil depth of oil 1.5 m 2.4 m Fig. 3.1 1.5 m The tank is filled with oil of density 850 kg / m 3 to a depth of 1.5
More informationU.S. TSUBAKI BS/DIN ROLLER CHAIN
TSUBAKI BS/DIN ROLLER CHAIN BS/DIN Roller Chain These chains are manufactured to International Standards Organization metric dimensions (ISO 606), British Standard (BS 228), and DIN 8187. They are available
More informationTR-AUGER. Section C INDEX BOOT / HOPPER
INDEX Section C TR-AUGER BOOT / HOPPER Description Page TR80 / TR100 x 51' basic auger... C2-3 TR80 / TR100 x 61' basic auger... C4-5 TR80 / TR100 x 71' basic auger... C6-7 TR Swing hopper... C8-9 TR-Boot
More informationTEPZZ A_T EP A1 (19) (11) EP A1 (12) EUROPEAN PATENT APPLICATION
(19) TEPZZ 55475 A_T (11) EP 2 554 752 A1 (12) EUROPEAN PATENT APPLICATION (43) Date of publication: 06.02.2013 Bulletin 2013/06 (21) Application number: 11176100.3 (51) Int Cl.: E02D 7/06 (2006.01) E02D
More informationQUICK START GUIDE CB-150 DATA BUOY PLATFORM
What s Included (1) Buoy hull with data well, 150 lb buoyancy (1) Buoy tower (3) 6W Solar panels (1) Data well lid (isic-cb or pass-through) (3) Top-side lifting eyes (3) Bottom-side mooring eyes Common
More informationI Illustrated Parts List 650 CRT B. Tiller. Repair Parts Manual
Illustrated Parts List 2001-11 I0102042 650 CRT B 954328030 Repair Parts Manual Tiller HANDLE ASSEMBLY 1 532 18 06-34 Control, Throttle 2 532 00 92-66 Grip, Handle 4 532 15 92-28 Bar Assembly, Control
More informationCAISSON SHAFT SYSTEM
CAISSON SHAFT SYSTEM Installation Guide INSTALLATION GUIDE FOR DN2000 TO DN3660 UNITS PLATE JOINTING SYSTEM This guide is to be used for the Installation of CPM Group Ltd caisson shaft units which use
More informationSpare parts list ( ) Spare parts list HD 4.0/36 P
Spare parts list (5.970-479.0) Spare parts list HD 4.0/36 P 13.04.2015 www.kaercher.com EN Table of contents Spare parts list HD 4.0/36 P (5.970-479.0)... 6 10 Frame... 7 20 Pump set... 9 21 Cylinder head...
More informationSpare parts list ( ) Spare parts list HD 1030 B
Spare parts list (5.958-299.0) Spare parts list HD 1030 B 03.09.2012 www.kaercher.com EN Page 2 Page 3 Page 4 Table of contents Spare parts list HD 1030 B (5.958-299.0)... 6 10 Individual parts (0.102-307.0)...
More informationB-Too Drilling and Tapping Machine
Material Specifications Powered by hand or with Ridgid 690 (TM-29) High strength, modular aluminum and steel components Inserts any 3 /4" to 1" corporation stop under pressure Extracts threaded corporation
More informationBike holder with three-point-support for mounting stand
Bike holder with three-point-support for mounting stand Ref.no. 589 4726 Translation of the original manual Issued: 07 / 2010 Keep this manual for future reference! Manufacturer: Weilnhammer Maschinenbau
More informationInstant Garage 20' x 12' 3" x 8' 3"
Instant Garage 20' x 12' 3" x 8' 3" Assembly Instructions Description Model # Instant Garage 20' x 12' 3" x 8' 3" - Grey CIG 1220 3503502 Recommended Tools OR THIS IS A TEMPORARY STRUCTURE AND NOT RECOMMENDED
More informationTrench Cable Rollers - Straight Pulling Application
Trench Cable Rollers - Straight Pulling Application Straight Cable Roller Straight Cable Roller - Heavy Duty Two Casing Supports, Roller body made of Precision Steel Tube. German Bearings protected against
More informationSB 202. Spare parts list Hydraulic breakers. SB 202 s/n BES Construction Tools PC AB No
SB 202 Spare parts list Hydraulic breakers SB 202 s/n BES051618 2018 Construction Tools PC AB No. 9800172001 2018-01 General information This spare parts list applies to the following: Part number 8460030050
More informationInstructions for use Installation recommendations
G A L A X Y P O O L O V A L S H A P E I n s t a l l a t i o n r e c o m m e n d a t i o n s a n d i n s t r u c t i o n s f o r u s e Instructions for use Installation recommendations 2 Installation recommendations
More informationSET OF EUROLEAGUE BACKSTOP UNITS (Reference PK120)
SET OF EUROLEAGUE BACKSTOP UNITS (Reference PK120) DESCRIPTION The EUROLEAGUE backstop unit is mainly designed for multi-sports pavilions and installations where the highest-level basketball competitions
More informationPNEUMATIC SEALER MODEL A
OPERATION MANUAL / SPARE PARTS LIST PNEUMATIC SEALER MODEL A461.0002 13.4510.01-13.4511.01 CE Declaration of conformity 13451001.en/MAS/ 02.04 13451101.en We declare that the machine A461 is in conformity
More informationShort-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 606 Fourth edition 2015-08-15 Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets Chaînes de
More informationMeter, PD Series H8-S1, S3, S5, S6, & S7 Parts List
Meter, PD Series H8-S1, S3, S5, S6, & S7 Parts List Issue/Rev. 0.0 (1/14) Bulletin PO01010 S1 S3, S5, S6, S7 The Most Trusted Name In Measurement Inner Mechanism Page 2 PO01010 Issue/Rev. 0.0 (1/14) Item
More informationPNEUMATIC SEALER MODEL A
OPERATION MANUAL / SPARE PARTS LIST PNEUMATIC SEALER MODEL A461.0002 13.4512.01-13.4513.01 13451201.en/MAS/ 02.04 13451301.en CE Declaration of conformity We declare that the machine A461 is in conformity
More informationUSER MANUAL. Beach volleyball posts BEACH CHAMP ID:
USER MANUAL Beach volleyball posts BEACH CHAMP ID: 111203 INDEX USER MANUAL FOR BEACH VOLLEYBALL POSTS BEACH CHAMP General information Overview Overview: Floor mounting options City Beach - for a freestanding
More informationSpare parts list ( ) Spare parts list high-pressure 9/20-4M *
Spare parts list (5.971-969.0) Spare parts list high-pressure 9/20-4M * 05.05.2015 www.kaercher.com EN Page 2 Page 3 Page 4 Table of contents Spare parts list high-pressure 9/20-4M * (5.971-969.0)... 6
More informationSpare parts list ( ) Spare parts list HD 2.3/14 C Ed Food
Spare parts list (5.972-564.0) Spare parts list HD 2.3/14 C Ed Food 05.08.2013 www.kaercher.com EN Page 2 Page 3 Page 4 Table of contents Spare parts list HD 2.3/14 C Ed Food (5.972-564.0)... 6 10 Housing
More informationGT22 Trimmer/Brushcutter UT Page 1 of 16 Accessories
GT22 Trimmer/Brushcutter UT-26039 Page 1 of 16 Accessories GT22 Trimmer/Brushcutter UT-26039 Page 2 of 16 Accessories Ref # Part Number Qty S/P/F Description 1 UP00578 1 TOOL KIT 2 DG07819 1 /P STRAP 3
More informationEdit this text for your title
Edit this text for your title MEK 4450 Marine Operations 1-3 Edit this text for your sub-title Presenter name, location, date etc. Kværner ASA / DNV, Fall 2014 Installation of flexibles and cables Typical
More informationReinstatement of sub-base and base (roadbase) in non-bituminous materials
This unit covers the requirements that you must meet when reinstating sub-base and base (roadbase) in. You must ensure that you act in accordance with all current specifications and procedures and that
More informationTRENCH AND EXCAVATION COLLAPSE
TRENCH AND EXCAVATION COLLAPSE A. GENERAL This guideline provides operational guidance at rescue incidents that involve the location, disentanglement and removal of victims from sub-surface trench and
More informationSizes Weight Gripping force Stroke per finger Workpiece weight Pieces : kg N mm kg
MPG-plus Sizes Weight Gripping force Stroke per finger Workpiece weight Pieces : 7 0.06.. 0.63 kg 25.. 350 N 1.5.. 10 mm 0.19.. 1.25 kg Application example Pneumatically driven, dual-axis pick-andplace
More informationBasketball system mobile
Basketball system mobile DIN-EN 1270 class C, TÜV-GS-APPROVED Completely made of aluminium Base frame and arm welded in one piece Holding fixture for counterweights in the base frame for stability and
More informationDead Centers FN / FNC
Dead Centers FN / FNC Type FN with morse taperl Rotating and fixed tailstock spindle sleeve. Designed for employment in turning, grinding and other production machines. made of full-hardened tool steel
More information10.2. Basketball Single Post System
Basketball Basketball Single Post System The basketball single post is made from special aluminium profiles. The structure is supported by one post in the ground. The post measures a cross section of 120
More informationILLUSTRATED PARTS LIST MFG. ID NO CUSTOMER CATALOG NO. MRT6 PRODUCT NO
ILLUSTRATED PARTS LIST MFG. ID NO. 600020 CUSTOMER CATALOG NO. MRT6 PRODUCT NO. 60 00-2 532 44 6-04 HANDLE ASSEMBLY 6 44 43 2 42 4 2 3 0 42 27 42 45 5 2 6 20 handle_assy_06 532 8 4-82 Control, Throttle
More informationHand lever valves VHER
Hand lever valves VHER Hand lever valves VHER Key features Powerful Flexible Practical -M- Flow 170 3800 l/min 4/3-way valve mid-position closed mid-position exhausted mid-position pressurised Connections:
More information