Aluminum Full Cover Fender 06 Chain Guard 15 Grip 19 Quick-Release Adaptor 26 Basket 30 Mirror 34 Accessory Hardware 36

Transcription

1

2

3 For E-Bike

4 4 CONTANTS

5 Aluminum Full Cover Fender 06 Chain Guard 15 Grip 19 Quick-Release Adaptor 26 Basket 30 Mirror 34 Accessory Hardware 36 5

6 ALUMINUM FULL COVER FENDER SW-FA-311 The classic appearance and innovative design of cable storage provide perfect and simple embedding mechanism for the power transmission line system of all E-bikes. SW-FA E1 SIZE WIDTH R A B C D E HANGER TIRE WIDTH 16" N/A 18" " " " "~1.375" 45mm SW-800R-F (1-1/8"~1-3/8") 26" C~35C 650B 700C " "

7 SW-FA E1 SW-FA E1 60 ± 1 SW-FA E1 65 ± 1 SW-FA E1 18 SIZE WIDTH R A B C D E HANGER TIRE WIDTH 16" N/A 18" " " " "~1.6" 50mm SW-800S-A 26" C~40C 650B 700C " " SIZE WIDTH R A B C D E HANGER TIRE WIDTH 16" N/A 18" " " " "~1.75" 55mm SW-800J 26" C~45C 650B 700C " " SIZE WIDTH R A B C D E HANGER TIRE WIDTH 20" " " " "~2" 60mm SW-800D 45C 650B C 28" " SIZE WIDTH R A B C D E HANGER TIRE WIDTH 650B C 65mm 28" " SW-800R-H 1.95"~2.35" 7

8 SW-FA-513 As light as feather! The innovative design of cable storage provides a simple embedding mechanism for the power transmission line system of all E-bikes. Combining with design of light and modern appearance, the fender presents a totally different sensation of technology. SW-FA E1 SIZE WIDTH R A B C D E HANGER TIRE WIDTH 16" N/A 18" " " " "~1.35" 43mm SW-800R-C 26" C~32C 650B 700C " "

9 50 ± 1 SW-FA E1 SIZE WIDTH R A B C D E HANGER TIRE WIDTH 16" N/A 18" " " " "~1.6" 50mm SW-800S-A 26" C~40C 650B 700C " " ± 1 SW-FA E1 SIZE WIDTH R A B C D E HANGER TIRE WIDTH 20" " " " "~1.75" 55mm N/A 650B 38C~45C C 28" " ± 1 SW-FA E1 SIZE WIDTH R A B C D E HANGER TIRE WIDTH 20" " " " "~2" 60mm SW B 45C C 28" "

10 CABLE STORAGE TECH SW-801E1 Patented Cable Tunnel (Fit Cable within ø3mm) (cable length:150cm) Indestructible! As the essence of the product, reinforcement was made to double the supporting strength of the original fender and meet the loading demands of the rear rack thoroughly. 5± 0.5 SW Cable Tunnel Tool Material: Alloy Finish: ED black Fit Cable within ø5mm Single or double cables. 10 Cable SW-808 Fit Cable within ø25mm 3.5± 0.5 SW Cable Tunnel Tool Material: Alloy Finish: ED black Slide-able and easy Snap-in Fit Cable within ø3.5mm Single or double cables. 10 Cable SW Support Rail Material: Stainless Finish: ED black 205mm SW-801E1+SW-807B Cable Tunnel Tool Slide-able and easy Snap-in Fit Cable within ø10mm Stable Single or multiple cables. Patented M SW-804E Washer Material: Stainless Finish: ED black For M5 screw SW SW SW

11 FENDER STAY MOUNTING (FIXED) ø3.2mm ø4.0mm SELECTIVE STAY THICKNESS SELECTIVE STAY EYELET DIAMETER All fender stay are avaliable in ø3.2mm and ø4.0mm thickness to meet different needs. Material: 204 / 304 Stainless Steel: ø3.2 and ø4.0mm MSA UPPER-MOUNTED FENDER STAY Fender stay mounted to the exterior of fenders with choice of stainless / chromed steel upper bracket. ø5mm +0.3 ø6mm +0.3 ø8mm +0.3 ø10mm MSB UNDER-MOUNTED FENDER STAY Fender stay mounted to the interior of fenders with bolt and screw only. MSI SINGLE-STAY + MOUNTED BRACKET Single fender stay mounted to both sides of fenders with stainless steel under bracket. MSV V-STAY + MOUNTED BRACKET V-style fender stay mounted to both sides of fenders with stainless steel under bracket. * Recommendable for FRONT & REAR fenders. Glossy Silver Glossy Black SW-FV-513 Patented CURVED ALUMINUM FENDER STAY FASTENER (FOR Ø3.2 MM FENDER-STAY ONLY) FENDER STAY / SEAT STAY HARDWARE SP-009 (FRONT FORK CLAMP) ø39mm Suitable for straight suspension fork. FORK SP-011 ONE-PIECE-MADE QUICK RELEASE STAY BRACKET Easy installation with elastic rubber strap. Double strap to fit tapered / straight fork. FORK FORK 11

12 STAY / DROPOUT HARDWARE TYPE 1 FIX-LENGTH STAY WITH 1/4 END Fixs on dropout or fork end eyelets. Length customizable. ø5 / ø6mm TYPE 2 FIX-LENGTH STAY WITH 5/16 END Fixs on front or rear hub axle. Length customizable. ø8.5mm~ø10mm TYPE 3 FIX-LENGTH STAY WITH 3/8 END Fixs on front or rear hub axle. Length customizable. ø10mm TYPE 4 MICRO-ADJUSTABLE STAY WITH U-SHAPE1/4 END Fixs on dropout or fork end eyelets with M5/M6 screw. Length customizable. ø5mm TYPE 5 MICRO ADJUSTABLE Stay length adjustable by fix SW-804 clips to dropout or fork end eyelets. 804J 804J-1 12mm Fender stay: ø4.0mm Fender stay: ø3.2mm 10mm 804M SLIDE SHIM Slidable shim gives the possibility with 10mm length adjustment to fender stay. TYPE 6 (PATENTED) 37mm MICRO ADJUSTABLE SW-804H Longer stay length adjustable by fix SW-804H clips to dropout or fork end eyelets. Length: 37mm 804H Fender stay: ø4.0mm 804H-1 Fender stay: ø5.0mm SEAT STAY FENDER STAY PATTERN STAMPING Prevent rotation θ CUSTOM ANGLE BENDING 12

13 FENDER STAY SAFETY POP-OFF STAY SAFETY DESCRPTION FIT STAY FUNCTION FV-515 Patented (FOR Ø3.2 / Ø4 MM FENDER-STAY) FENDER STAY SAFETY POP-OFF Applicable to MSA / MSB / MSI / MSV fender-stays to pop-off when jammed. MSA MSB MSI MSV FENDER FIXTURES ANTI NOISE SHIM Fix between fender and hanger for noise reduction purpose. Customization available width : 50mm / 65mm STAINLESS STEEL SELF-BEND HANGER Material: Stainless Steel SW-805B PRE-BENT CARRIER TYPE HANGER Connects between carrier & fender when fastener is not used. Pre-bent to fit selected fender and cutout ready to fit reflector. Material: Steel Finishing: ED BK SCBM-1 STANDARD FENDER-CHAINSTAY BRIDGE MOUNT (FOR FENDER WIDTH WITHIN 55MM.) Bolt fixs between fender and chainstay bridge. SW-805E SELF-BEND CARRIER TYPE HANGER Connects between carrier & fender when fastener is not used. Pre-bent to fit selected fender and cutout ready to fit reflector. Material: Steel Finishing: ED BKFinishing: ED BK SCBM-2 STANDARD FENDER-CHAINSTAY BRIDGE MOUNT (FOR FENDER WIDTH ABOVE 60MM.) Bolt fixs between fender and chainstay bridge. SW-804B QUICK CLIP FENDER-CHAINSTAY BRIDGE MOUNT Material: Steel Finishing: ED BK For chain stay ø15mm Clip-in between fender and chainstay bridge (no tool required) SW-802A HANGER-BRIDGE WASHER Material: PP R7mm recessed to fit bridge tube. R7 4.3 SW-802B HANGER-FORK WASHER Material: PP R14.5mm recessed to fit fork sleeve tube. R

14 FENDER TAILS FIX & MATERIAL FRONT TAIL REAR TAIL MODEL FIT FENDER SW-503F1 FA E1 SW-503G1 FA E1 SW-503H1 FA E1 SW-503I1 FA E1 CLIP FIX SW-503J1 FA E1 (PP) SW-503K1 FA E1 SW-503L1 FA E1 SW-503M1 FA E1 SW-503N1 FA E1 COLOR: BLACK/ BLACK TRANSPARENT APPEARANCE TECHNICAL & FIXTURE TAILS SHAPE DESIGN CONCAVE Design for fender stay mounting POLYESTER NAMEPLATE COLOR & SURFACE TREATMENT CHART Customizable anodize and painting treatment. Customizable fender color and length. 14 AF-Z01 AF-M01 AF-S01 AF-P01 AF-C01 AF-R02 AF-D02 AF-D01 AF-D03 Black Matt Black Sandblasted Black Polished Black Coated Red Reflective Printed on Design Design on Strap-Centre Coated Surface Heat Transfer Printing

15 CHAIN GUARD BRACKET SYNOPSIS E-BIKE (SHIMANO) E-BIKE (BAFANG) E-BIKE (BOSCH) 71K2 71K5 71I0 71J0 71I3 71J3 71K4 71K0 71I1 71J1 71I4 71J4 71K3 71K1 71I2 71J2 Type Chain Case Bracket Type Chain Case Bracket Type Chain Case Bracket DU-E6 series E8 series SW-CG-173A SW-CG-173B SW-CG-117 SW-CG-173A SW-CG-173B SW-CG K2 71K4 71K0 71K3 71K5 71K1 MM G MM G SW-CG-173A SW-CG-173B SW-CG-113 SW-7802, SW-7422 SW-CG I0 71I1 71I2 71I3 71I4 Active Line Active Line Plus SW-CG-173A SW-CG-173B SW-CG-113 SW-7802, SW-7422 SW-CG J0 71J1 71J2 71J3 71J4 15

16 CG-173D CG-173B CG-173E CHAIN GUARD The characteristics from PC materials completely escalate the product features and quality. SW-CG-173A Material: PC Finish: Gloss Duotone design 38T 502 CG-173A ø ø60 ø60.5 ø SW-CG-173B Material: PC Finish: Gloss Duotone design 44T ø44 ø60 ø ø SW-71K2 for SHIMANO DU-E6 series drive unit SW-71K3 for SHIMANO E8 series drive unit SW-71I0 for BAFANG MMG / MM G drive unit SW-71J0 for BOSCH MY18 Active Line / MY18 Active Line Plus 16 SW-71K4 for SHIMANO DU-E6 series drive unit SW-71K5 for SHIMANO E8 series drive unit SW-71I1 for BAFANG MM G / MM G drive unit W-71J1 for BOSCH MY18 Active Line / MY18 Active Line Plus

17 ø61 ø61 SW-7802 ø102 38T 380 Material: PC Finish: Gloss (SW-7802) or Etched (SW-7802A) ø SW-7422 ø T 431 Material: PC Finish: Gloss Duotone design ø SW-71I3 for BAFANG MM G / MM G drive unit SW-71J3 for BOSCH MY18 Active Line / MY18 Active Line Plus SW-71I3 for BAFANG MM G / MM G drive unit SW-71J3 for BOSCH MY18 Active Line / MY18 Active Line Plus 17

18 CHAIN GUARD SW-CG-113 ø T 445 Material: PC Finish: Gloss Color customizable window plate ø60.5 ø SW-CG-117 ø102 38T SW-CG R Material: PC Finish: Gloss Chain-stay clamp SW-CG R ø44 ø60 ø SW-71I2 for BAFANG MM G / MM G drive unit SW-71J2 for BOSCH MY18 Active Line / MY18 Active Line Plus ø61 18 SW-71K0 for SHIMANO DU-E60 STEPS drive unit SW-71K1 for SHIMANO E8 series drive unit SW-71I4 for BAFANG MMG / MM G drive unit SW-71J4 for BOSCH MY18 Active Line / MY18 Active Line Plus

19 GRIPS

20 TPR For riders that hate sticky feeling on the grips, our product will provide whole new experience. Even if the bicycles are parked outdoor under direct sunlight always, our grip ranges are committed to stay clean and comfortable to hold onto within a year. SILICON Due to difference in crafting techniques, there are two options on the silicon grips: For OEM requirement, product made with 100% silicon materials can be selected. For ASM, grips produced with silicon foam can be selected to enhance quality and velvet touch of the grips. EVA The light weight of EVA has always been known by the public. However, when you personally experience the sensation on grips made from EVA, you will be astonished by the extreme comfort and anti-slip design. SW-GC-111 Material: TPR Length: 131mm Design for ø22.2mm handlebar 20

21 SW-GC-115 Material: TPR Length: 127mm Design for ø22.2mm handlebar SW-GC-117 Material: TPR / PP Horn-shape bar end for better safety Length: 130mm Design for ø22.2mm handlebar SW-GC-119 Material: TPR Horn-shape bar end for better safety Length: 110mm Design for ø22.2mm handlebar 21

22 SW-GC-131 Material: TPR Exclusively designed for handlebar with Derailleur lever. Length: 90mm Design for ø22.2mm handlebar SW-GC-135 Material: TPR Length: 140mm Design for ø22.2mm handlebar SW-GC-151 Material: TPR Length: 90 / 140mm Design for ø22.2mm handlebar 22

23 SW-GC-159 Material: TPR (SW-GC-159B) / TPR & PP (SW-GC-159A) Length: 138mm Design for ø22.2mm handlebar SW-GC-159A SW-GC-159B PP Inner Tube SW-GC-171 Material: TPR (SW-GC-171B) / TPR & PP (SW-GC-171A) Length: 138mm Design for ø22.2mm handlebar Duotone colour design SW-GC-171A SW-GC-171B PP Inner Tube 23

24 FL-GC g Material: TPR Grip / Aluminum Bar-end Length: 135mm Design for ø22.2mm handlebar FL-GC g Material: TPR Grip / Aluminum Bar-end Length: 135mm Design for ø22.2mm handlebar FL-GC g Material: EVA Foam & Rubber (FL-GC-115A) / EVA Foam (FL-GC-115B) Use: Mountain, City Length: 133mm (FL-GC-115A) / 132mm (FL-GC-115B) Design for ø22.2mm handlebar FL-GC-115A 24 FL-GC-115B

25 FL-GC g Material: EVA Foam & Rubber (FL-GC-117A) / EVA Foam (FL-GC-117B) Use: City, Touring Length: 133mm (FL-GC-117A) / 132mm (FL-GC-117B) Design for ø22.2mm handlebar FL-GC-117A FL-GC-117B FL-GC-119C 137 g Material: Silicone Foam & Rubber Weight: 137g Use: City, Touring Length: 132mm Design for ø22.2mm handlebar FL-GC-119A 209 g FL-GC-119B 190 g FL-GC-119D 192 g Material: Silicone & Rubber Weight: 209g Length: 132mm Design for ø22.2mm handlebar Material: Silicone & Rubber Weight: 190g Length: 132 / 100mm Design for ø22.2mm handlebar Material: Silicone Weight: 192g Length: 132 / 100mm Design for ø22.2mm handlebar 25

26 QUICK-RELEASE ADAPTOR

27 SW-QA-1111 series Quick-releae system design for e-bike to installed with basket and bag. Colour Choice: Sandblasted Silver / Sandblasted Black Customized laser logo available Angle-Adjustable SW-QA-111D1 SW-QA-111D2 SW-QA-111D3 Material: Aluminum / PA6 Fit ø22.2~31.8mm handlebars Width: 75mm Material: Aluminum / PA6 Fit ø22.2~31.8mm handlebars Width: 95mm Material: Aluminum / PA6 Fit ø22.2~31.8mm handlebars Width: 120mm 27

28 SW-QA-113 series Quick-release arm bracket downwards design to avoid the front light to be hided by basket. Max Load: 5kgs Colour Choice: Sandblasted Silver / Sandblasted Black Customized laser logo available Angle-Adjustable SW-QA-113D1 SW-QA-113D2 SW-QA-113D3 Material: Aluminum / PA6 Fit ø22.2~31.8mm handlebars Width: 75mm Material: Aluminum / PA6 Fit ø mm handlebars Width: 95mm Material: Aluminum / PA6 Fit ø22.2~31.8mm handlebars Width: 120mm 28

29 SW-CH-117 The mounting system for bottle holder attached onto round tubes SW-CH-117A Handlebar Mount Material: PA6 Angle adjustable. Fit ø22.2~ø35mm handlebars SW-CH-117B Handlebar Mount Material: PA6 Fit ø22.2~ø35mm handlebars 29

30 BASKET With the plastic basket that is much better than plastic bags, our product allows the user possibility of loading more objects!

31 SW-KA Material: PP Fit 24"~26" city bikes L 389 x W 297 x H 260mm SW-KA-117R 1160 Material: PP Fix to rear carrier L 440 x W370 x H250mm 31

32 SW Material: PP Suitable for 26 / 700c bikes Avaliable with / without handle L 380 x W265 x H270mm SW-RBK-ST Material: PP Rear carrier fixation Exclusive distribution: Japan by BRIDGESTONE L455x W345 x H260mm 32

33 SW-KC kg All objects (i.e., keys, books, notebook computers and any other items you can think of) can be placed into our unique storage compartment. Because of the pivot design, the top cover of storage compartment can be opened to any angle of choice, which adds another unique feature to the storage compartment. Material: ABS Capacity: 12L Optional Laptop holder avaliable (Fit Laptop size: L280~320 x W200~250mm) L485 x W315 x H190mm SW Simple clip lock and top tightening design allows saving on use of plastic bags when shopping. The idea originated from environmental friendliness and love towards Mother Earth. We wish to leave the next generation with a pleasant environment. 345mm Material: Steel / Vynil Suitable for 26" / 700C bikes. Easy-install and disassemble basket cover included Basket cover included to prevent loads from falling out. Quick-release hardware avaliable. Optional upgraded handle (BKG-11) to select 250mm Upgraded Handle (BKG-11) 255mm 33

34 MIRROR SW-BM-111 Material: ABS+Coating / PA / Glass Fit ø14.5~ø19.5mm handlebar-end Multi-angle adjustable Convex mirror Avaliable in single item (BM-111R / BM-111L) or a set Color: Black / White / Yellow 54 mm 93 mm Mirror Size

35 SW-BM-113 Material: ABS+Coating / PA / Glass Fit ø14.5~ø19.5mm handlebar-end Multi-angle adjustable Convex mirror Avaliable in single item (BM-113R / BM-113L) or a set Color: Black / White / Yellow 63 mm 81 mm Mirror Size SW-BM-115 Material: ABS+Coating / PA / Glass Fit ø18~ø21mm Inner Diameter bar-end Multi-angle adjustable Convex mirror Avaliable in single item (BM-115R / BM-115L) Color: Black / White / Yellow / Red 38mm 53 mm Mirror Size 35

36 ASSCESSORY HARDWARE

37 SW-PT02 Easy control to go forward straightly anytime Front-wheel Alignment Gear Material: PP / SUS304 Fit on built-in bracket of downtube to aligh front wheel straight Spring Length 112mm SW-PT03 Easy control to go forward straightly anytime Front-wheel Alignment Gear Material: PP / SUS304 Fit on built-in bracket of downtube to aligh front wheel straight Spring Length 85mm 37

38 SW-AC-511A Coffe to go ~ Material: Aluminum Costomizable colors. Fit ø22.2~ø35mm handlebar Weight: 80g SW-BH-111 The water bottle cage is designed for use by both left-handed and right-handed riders. Material: PC / ABS Fit ø72~ø80mm bottle 38

39 SW-BH-113 Multiple designed bottle holder for stainless bottle and plastic bottle, the width can be adjusted at ease without the need to use any tools. Material: PC / ABS / Aluminum Fit ø72~ø80mm PET bottle For ø72.5~ø81mm Stainless Water Bottle (18oz Classic and insulated bottle) 13mm SW-BH-113L Perfect functionalities! With our water bottle cage, the height and width can be adjusted at ease without the need to use any tools to meet dimensional requirements of various metal and plastic water bottles. Material: PC / ABS / Aluminum Fit ø72~ø80mm PET bottle For ø72.5~ø81mm Stainless Water Bottle (27oz Classic and insulated bottle) 25mm MAX: 207mm 13mm MAX: 81mm 39

40