DEALER MANUAL REV

Transcription

1 DEALER MANUAL REV SANTA CRUZ, CALIFORNIA

2 ROAD CRANKS ZAYANTE CARBON - M30 Carbon arms Direct Mount X-Spider 160/104BCD 165 / 170 / / 175 lengths X-Rings 48/32, 50/34, 52/36, 53/39 Alloy CR Bolts DM 1X 38T, 40T, 42T Wave Tech (other sizes coming soon) M30 alloy spindle Requires Praxis M30 BB 2X = 10/11sp chains 1X = 10/11/12sp chains Approximate weight 615g /- (172.5 with 50/34) Q-Factor 147mm Chainline 43.5 for 2X 45mm for DM1X DM-ZC-165-XXXX DM-ZC-170-XXXX DM-ZC-1725-XXXX DM-ZC-175-XXXX Compatible with both mechanical and electronic 10/11sp shifting systems from Shimano, SRAM and Campagnolo. Also compatible with 3-Bolt Direct Mount spider power meters from Power2Max, SRM and older Quarq. ZAYANTE - M30 Hollow forged arms Direct Mount 110BCD 165 / 170 / / 175 lengths 2X Rings 46/36, 48/32, 50/34, 52/36, 53/39 Alloy CR Bolts DM 1X 38T, 40T, 42T Wave Tech (other sizes coming soon) M30 alloy spindle Requires Praxis M30 BB 2X = 10/11sp chains 1X = 10/11/12sp chains Approximate weight 712g /- (172.5 with 50/34) Q-Factor 147mm Chainline 43.5 for 2X 45mm for DM1X DM-PZ-165-XXXX DM-PZ-170-XXXX DM-PZ-1725-XXXX DM-PZ-175-XXXX Compatible with both mechanical and electronic 10/11sp shifting systems from Shimano, SRAM and Campagnolo. Also compatible with 3-Bolt Direct Mount spider power meters from Power2Max, SRM and older Quarq.

3 ROAD CRANKS ALBA - M30 Solid forged arms Direct Mount 110BCD 165 / 170 / / 175 lengths 2X Rings 46/36, 48/32, 50/34, 52/36 Alloy CR Bolts DM 1X 38T, 40T, 42T Wave Tech (other sizes coming soon) M30 alloy spindle Requires Praxis M30 BB 2X = 10/11sp chains 1X = 10/11/12sp chains Approximate weight 775g /- (172.5 with 50/34) Q-Factor 147mm Chainline 43.5 for 2X 45mm for DM1X DM-A165-XXXX DM-A170-XXXX DM-A1725-XXXX DM-A175-XXXX Compatible with both mechanical and electronic 10/11sp shifting systems from Shimano, SRAM and Campagnolo. Also compatible with 3-Bolt Direct Mount spider power meters from Power2Max, SRM and older Quarq. ALBA - M24 (OEM ONLY PRODUCT) Solid forged arms 110BCD integrated spider 165 / 170 / / 175 lengths 2X Rings 48/32 Steel CR Bolts (Steel inner ring) 110BCD 1X 38T, 40T, 42T Wave Tech M24 cromo spindle Requires Praxis M24 or SRAM GXP BB. 2X = 10/11sp chains 1X = 10/11/12sp chains Approximate weight 786g /- (172.5 with 50/34) Q-Factor 147mm Chainline 43.5 for 2X 45mm for 1X Compatible with both mechanical and electronic 10/11sp shifting systems from Shimano, SRAM and Campagnolo. Note : This is an OEM spec only crank, not an aftermarket crank.

4 MTN CRANKS LYFT CARBON - M30 THRU Carbon arms 3-Bolt Direct Mount 170 / 175 lengths M30 THRU alloy spindle Requires Praxis M30 THRU BB Wave Tech DM ring for 49mm or BOOST 52mm chain line included Works with 10/11/12sp chains Approximate weight 460g /- (175mm with 32T) Q-Factor 172mm Praxis DMA ring = 49mm CL DMB ring = 52mm BOOST CL L170-XXXX L175-XXXX Compatible with both mechanical and electronic shifting systems from Shimano and SRAM. Wave Tech rings compatible with 10/11/12sp chains Also compatible with 3-Bolt Direct Mount spider power meters from Power2Max, SRM and older Quarq. LYFT HD CARBON - M30 THRU Carbon arms 3-Bolt Direct Mount HD robust carbon layup 170 length only Thicker HD M30 THRU spindle Requires Praxis M30 THRU BB Wave Tech DM ring for 49mm or BOOST 52mm chain line included Works with 10/11/12sp chains Approximate weight 548g /- (170mm with 32T) Q-Factor 172mm Praxis DMA ring = 49mm CL DMB ring = 52mm BOOST CL L170-XXXX HD Compatible with both mechanical and electronic shifting systems from Shimano and SRAM. Wave Tech rings compatible with 10/11/12sp chains Also compatible with 3-Bolt Direct Mount spider power meters from Power2Max, SRM and older Quarq.

5 MTN CRANKS GIRDER CARBON - M30 Carbon arms 3-Bolt Direct Mount 170 / 175 lengths M30 alloy spindle Requires Praxis M30 BB Wave Tech DM ring for 49mm or BOOST 52mm chain line included Works with 10/11/12sp chains Approximate weight 550g /- (175 with 32T) Q-Factor 172mm Praxis DMA ring = 49mm CL DMB ring = 52mm BOOST CL GC170-XXXX GC175-XXXX Compatible with both mechanical and electronic shifting systems from Shimano and SRAM. Wave Tech rings compatible with 10/11/12sp chains Also compatible with 3-Bolt Direct Mount spider power meters from Power2Max, SRM and older Quarq. GIRDER - M30 Hollow forged arms 3-Bolt Direct Mount 170 / 175 lengths M30 alloy spindle Requires Praxis M30 BB Wave Tech DM ring for 49mm or BOOST 52mm chain line included Works with 10/11/12sp chains Approximate weight 605g /- (175 with 32T) Q-Factor 172mm Praxis DMA ring = 49mm CL DMB ring = 52mm BOOST CL PG170-XXXX PG175-XXXX Compatible with both mechanical and electronic shifting systems from Shimano and SRAM. Wave Tech rings compatible with 10/11/12sp chains Also compatible with 3-Bolt Direct Mount spider power meters from Power2Max, SRM and older Quarq.

6 MTN CRANKS CADET - M30 Solid forged arms 3-Bolt Direct Mount 170 / 175 lengths M30 alloy spindle Requires Praxis M30 BB Wave Tech DM ring for 49mm or BOOST 52mm chain line included Works with 10/11/12sp chains Approximate weight 636g /- (175 with 32T) Q-Factor 172mm Praxis DMA ring = 49mm CL DMB ring = 52mm BOOST CL C170-XXXX C175-XXXX Compatible with both mechanical and electronic shifting systems from Shimano and SRAM. Wave Tech rings compatible with 10/11/12sp chains Also compatible with 3-Bolt Direct Mount spider power meters from Power2Max, SRM and older Quarq. CADET - M24 (OEM ONLY PRODUCT) Solid forged arms 3-Bolt Direct Mount 170 / 175 lengths M24 cromo spindle Requires Praxis M24 or SRAM GXP BB. Wave Tech Cromo DM ring for 49mm or BOOST 52mm chain line Works with 10/11/12sp chains Approximate weight 756g /- (175 with 32T cromo ring) Q-Factor 172mm Praxis DMA ring = 49mm CL DMB ring = 52mm BOOST CL Compatible with both mechanical and electronic shifting systems from Shimano and SRAM. Wave Tech rings compatible with 10/11/12sp chains Also compatible with 3-Bolt Direct Mount spider power meters from Power2Max, SRM and older Quarq. Note : This is an OEM spec only crank, not an aftermarket crank.

7 ROAD / TT / CX RINGS ROAD RINGS X-RINGS 160/104BCD 48/32, 50/34, 52/36 and 53/39 BUZZ RINGS 110BCD 46/36, 48/32, 50/34, 52/36 130BCD 53/39 Cold Forged LevaTime shifting technology 7075 T6 Aluminum Buzz rings for 5-arm AND 4-arm w/hidden 5th Buzz rings include a long and a short replaceable threaded chain catch pin Work with 10/11sp chains Great for use with Di2, EPS, or etap shifting systems X-Ring set X-RING RING X /39 160/104BCD X-RING BLK X /36 160/104BCD X-RING BLK X /34 160/104BCD X-RING BLK X /32 160/104BCD X-RING BLK BUZZ RING /39 130BCD BUZZ BLK /36 110BCD BUZZ BLK /34 110BCD BUZZ BLK /32 110BCD BUZZ BLK (Only installs on Praxis road cranks) /36 110BCD CX BLK Buzz ring set All Praxis road sets are compatible with 10/11sp mechanical and electronic shifting systems from Shimano, Campagnolo and SRAM. TT RINGS 56/42 ring set 130BCD 54/42 56/42 LevaTime shifting technology Machined mfg. Hard Anodized 7075-T6 Aluminum Work with 10/11sp chains Great for use with Di2, EPS, or etap shifting systems 56/42 includes a long and a short replaceable threaded chain catch pin as it s made for either 5-arm AND 4-arm cranks w/hidden 5th (like SRAM Exogram) 54/42 is prior generation for traditional 5-Arm crank /42 130BCD TT BLK /42 130BCD TT BLK All Praxis road sets are compatible with 10/11sp mechanical and electronic shifting systems from Shimano, Campagnolo and SRAM. 54/42 ring set

8 MTN DM RINGS 1X Wave Tech - MTN Direct Mount 30-36T 3-Bolt Direct Mount 7075-T6 Two chainlines offered : DM-A or DM-B Wave Tech tooth profile 10/11/12sp Shimano/KMC/SRAM Machined manufacturing with hard black anodizing for durability REAR DER- Must use a CLUTCH type rear derailleur. Example Shimano Shadow or SRAM Type 2 In rough terrain, or just for security, we still recommend use of an upper guide DMA DMA DMA DMA DMB DMB DMB DMB 30T DM-A 32T DM-A 34T DM-A 36T DM-A 30T DM-B 32T DM-B 34T DM-B 36T DM-B All Praxis 1X Wave Tech are compatible with 10/11/12sp chains **NOTE - IF INSTALLING ON SRAM CRANK, SEE GUIDE ON BACK PAGE

9 ROAD / GRAVEL / CX RINGS 1X Wave Tech - 110BCD 38T, 40T, 42T 110BCD 7075-T6 Wave Tech tooth profile 10/11/12sp Shimano/KMC/SRAM Stamped and machined manufacturing with hard black anodizing for durability REAR DER- Must use a CLUTCH type rear derailleur. Example Shimano Shadow or SRAM Type 2 In rough terrain, or just for security, we still recommend use of an upper guide T 110BCD BLK T 110BCD BLK T 110BCD BLK All Praxis 1X Wave Tech are compatible with 10/11/12sp chains 1X Wave Tech - Road Direct Mount 38T, 40T, 42T 3-Bolt Direct Mount 7075-T6 Wave Tech tooth profile 10/11/12sp Shimano/KMC/SRAM Stamped and machined manufacturing with hard black anodizing for durability REAR DER- Must use a CLUTCH type rear derailleur. Example Shimano Shadow or SRAM Type 2 In rough terrain, or just for security, we still recommend use of an upper guide 45mm chainline T DIRECT MOUNT BLK T DIRECT MOUNT BLK T DIRECT MOUNT BLK All Praxis 1X Wave Tech are compatible with 10/11/12sp chains

10 MTN RINGS 1X Wave Tech - 104BCD 104 BCD 30, 32, 34, 36T 7075-T6 Wave Tech tooth profile 10/11/12sp Shimano/KMC/SRAM Machined manufacturing with hard black anodizing for durability 30T NOTE: is threaded and needs M8 bolt with min 7.5mm length threads REAR DER- Must use a CLUTCH type rear derailleur. Example Shimano Shadow or SRAM Type 2 In rough terrain, or just for security, we still recommend use of an upper guide T 104BCD BLK T 104BCD BLK T 104BCD BLK T 104BCD BLK All Praxis 1X Wave Tech are compatible with 10/11/12sp chains 1X Wave Tech - 94BCD 94 BCD 30T 7075-T6 Wave Tech tooth profile 10/11/12sp Shimano/KMC/SRAM Machined manufacturing with hard black anodizing for durability REAR DER- Must use a CLUTCH type rear derailleur. Example Shimano Shadow or SRAM Type 2 In very rough terrain, or just for pure security, we still recommend use of an upper guide T 94BCD BLK All Praxis 1X Wave Tech are compatible with 10/11/12sp chains

11 GUIDES / CASSETTE CHAINGUIDES ISCG 05 ISCG 05 HIGH DM BRAZE-ON Alloy Booms Inject mold guide heads ISCG 05 offers a tall or short version Short 26T-32T Tall 26T-38T Braze-On - For Road/CX use with sizes 38T-46T (frame Braze-on can limit) 4mm Allen wrench adjusts the vertical, lateral, and guide head angle High DM ISCG-2632 ISCG Short Guide ISCG-2638 ISCG Tall Guide CG-HDM2638 High Direct Mount Guide CG-Braze Braze-on Guide Braze-On 10sp Wide Range Cassette 10sp MTB are steel and are hard anodized 7075-T6 Al For 10spd Shimano/SRAM Mid or Long cage MTB derailleurs only For 1X10 or 2 10 MTB drivetrains only (adjust chain length accordingly) Weight 322g /- Created as a no sacrifice, no compromise Wide-Range 10sp MTB cassette that you can use an unmodified 10sp rear derailleur with gearing allows this all while using your existing 10sp wheels. No modifications, No adaptors CS-1140 SHIMANO & SRAM Must be MID or LONG cage 10sp rear derailleur. Always use new 10sp chain of your choice, and set the length depending on if you are riding 1X or 2X drivetrain. Chain length is also a preference for your personal setup. Adjust the rear derailleur B-Tension screw down so the upper pulley clears the 40T cog.

12 WHEELS / RIMS C32 WHEEL & RIM WHEEL SET - TRAIL / All Mountain 27.5 or 29 CARBON RIM 32mm Int. Width 38mm Ext. Width 3mm offset Asymmetrical spoke bed for even spoke tension BOOST DT350 Front /DTSwiss 350 Rear Shimano Freehub or XD Driver DT Star Ratchet mechanism Tubeless ready with bead lock Rim strip, valve stem included. Easy to mount tubeless tires with floor pump J-Bend spokes / External Alloy nipples for easy service Pressure-Do not exceed tire manufacturer s recommended pressure. Approx Weight- 29 set: 1766g 27.5 set: 1758g (with rim strips/valve) RIM ONLY - TRAIL / All Mountain 32 Hole 27.5 or 29 Approx Weight 27.5 : 424g 29 : 475g WL-C32-29SH BOOST SET WL-C32-29XD BOOST SET WL-C32-27SH BOOST SET WL-C32-27XD BOOST SET C32-29 RIM C32-27 RIM AL32 WHEEL & RIM WHEEL SET - TRAIL / All Mountain 27.5 or 29 ALLOY RIM 32mm Int. Width 38mm Ext. Width 3mm offset Asymmetrical spoke bed for even spoke tension BOOST DT370 Front /DTSwiss 370 Rear Shimano Freehub or XD Driver DT Pawl mechanism Tubeless ready with bead lock Rim strip, valve stem included. Easy to mount tubeless tires with floor pump J-Bend spokes / External Alloy nipples for easy service Pressure-Do not exceed tire manufacturer s recommended pressure. Approx Weight- 29 set: 1914g 27.5 set: 1830g (with rim strips & valve) RIM ONLY - TRAIL / All Mountain 32 Hole 27.5 or 29 Approx Weight 29 : 518g 27.5 : 490g 19mm WL-AL32-29SH BOOST SET WL-AL32-29XD BOOST SET WL-AL32-27SH BOOST SET WL-AL32-27XD BOOST SET AL32-29 RIM AL32-27 RIM

13 WHEELS / RIMS RC21 WHEEL & RIM WHEEL SET - CX / Gravel / Road 700C DISC ONLY CARBON RIM 21mm Int. Width 27mm Ext. Width Praxis by DTSwiss 350 Front and Rear 32H Shimano Freehub or XD Driver DT Star Ratchet mechanism Front 15mm Thru Axle Rear 142/12mm Thru Axle Tubeless ready with bead lock Rim strip, valve stem included. Easy to mount tubeless tires with floor pump J-Bend spokes / External Alloy nipples for easy service 1524g pair w/out Thru-axles Pressure-Do not exceed tire manufacturer s recommended pressure. RIM ONLY - CX / Gravel / Road 700C DISC ONLY Approx Weight 374g WL-RC21-700SHIM SET WL-RC21-700XD SET RC21 RIM

14 M30 BOTTOM BRACKETS B M30 BSA B M30 BSA Ceramic M30 - BSA ENGLISH THREADED For Praxis M30 spindle cranks installing on a BSA/Eng. threaded frame 68mm Road version / 68/73mm MTB setup 30mm Drive bearing / 28mm NonDrive bearing cartridge bearings Wave washer on drive-side for bearing preload Ceramic version is Grade 5 / ABEC 5 rating Forged & machined heat-treated AL Cups Praxis M30 BB tools required for installation Sold separately B M30 BB86/90/92 M30 - BB86 BB90 BB92 For Praxis M30 spindle cranks installing on: BB86 ROAD/BMX BB90/BB92 MTN 30mm Drive bearing / 28mm NonDrive bearing Steel cartridge bearings Wave washer on drive-side for bearing preload Unique design in which the bearing outer race is also the outer press fit surface M30 T47 M30 - T47 THREADED (External Bearing) For Praxis M30 spindle cranks installing on a T47 threaded 68/73mm frame 68mm Road version / 68/73mm MTB setup 30mm Drive bearing / 28mm NonDrive bearing cartridge bearings Wave washer on drive-side for bearing preload Ceramic version is Grade 5 / ABEC 5 rating Forged & machined heat-treated AL Cups Praxis M30 BB tools required for installation Sold separately M30 386EVO M30 386EVO Ceramic M30-386EVO For Praxis M30 spindle cranks installing on 386EVO road bikes 30mm Drive bearing / 28mm NonDrive bearing Steel cartridge bearings Wave washer on drive-side for bearing preload Ceramic version is Grade 5 / ABEC 5 rating Inject molded cups for press fit 386EVO R M30 BB/PF30 68MM ROAD R M30 BB/PF30 68MM ROAD CERAMIC (For older SBC Carbon OSBB 61.5mm road bikes, add TP-3002) R M30 BB/PF30 73MM MTN R M30 BB/PF30 68MM MTN CERAMIC M30 - BB30 & PF30 New updated design with rubber expanding collet. For Praxis M30 spindle cranks installing on a BB30 or PF30 frame 68mm Road version / 73mm MTB setup (68mm cannot be used for MTN!) 30mm Drive bearing / 28mm NonDrive bearing cartridge bearings Wave washer on drive-side for bearing preload Ceramic version is Grade 5 / ABEC 5 rating Forged & machined heat-treated AL Cups Praxis M30 BB tools required for installation Sold separately R M30 BBRight R M30 BBRight Ceramic M30 - BBRight New updated design with rubber expanding collet. For Praxis M30 spindle cranks installing on a BBRight frame 30mm Drive bearing / 28mm NonDrive bearing cartridge bearings Wave washer on drive-side for bearing preload Ceramic version is Grade 5 / ABEC 5 rating Forged & machined heat-treated AL Cups Praxis M30 BB tools required for installation Sold separately

15 M30 THRU BOTTOM BRACKETS M30 THRU BSA M30 THRU - BSA ENGLISH THREADED For installing Praxis LYFT crank into BSA threaded frames Also good for RaceFace/Easton Cinch cranks or Rotor Rex/3D cranks 68mm Road version / 68/73mm MTB setup 30mm Drive bearing / 30mm NonDrive bearing Steel cartridge bearings Forged & machined heat-treated AL Cups Praxis M30 BB tool required for installation Sold separately M30 THRU BB86/90/92 M30 THRU - BB86 BB90 BB92 For installing Praxis LYFT crank into BB90 or BB92 MTN frames Also good for RaceFace/Easton Cinch cranks or Rotor Rex/3D cranks BB90 or BB92 MTN BB86 ROAD 30mm Drive bearing / 30mm NonDrive bearing Steel cartridge bearings R M30 THRU BB/PF30 73MM MTN M30 THRU - BB30 & PF30 New updated design with rubber expanding collet. For installing Praxis LYFT crank into BB30 or PF30 MTN frames Also good for RaceFace/Easton Cinch cranks or Rotor Rex/3D cranks 73mm MTN setup 30mm Drive bearing / 30mm NonDrive bearing Steel cartridge bearings Forged & machined heat-treated AL Cups Praxis M30 BB tools required for installation Sold separately M24 BOTTOM BRACKETS M24 BSA M24 - BSA ENGLISH THREADED For steel spindle Praxis M24, Oval Concepts M24, and SRAM Gxp cranks 68/73mm for Road or MTN 24mm Drive bearing / 22mm NonDrive bearing Steel cartridge bearings Wave washer on drive-side for bearing preload M24 BB86/90/92 M24 - BB86 BB90 BB92 For steel spindle Praxis M24, Oval Concepts M24, and SRAM Gxp cranks BB86 Road BB90 & BB92 MTN 24mm Drive bearing / 22mm NonDrive bearing Steel cartridge bearings Wave washer on drive-side for bearing preload Pressfit Delrin Cups

16 CONVERSION BOTTOM BRACKETS SHIMANO TO BB30/PF30 - CONVERSION BB New updated design with rubber expanding collet. This version for Shimano Hollowtech II steel spindle cranks only. Designed precisely to Shimano bearing stance & chain line spec. Forged & machined heat-treated 7075 T6 Aluminum 68MM is for Road bikes only 73mm is for MTN bikes only. Steel version : Enduro 2437 Ceramic Version : Enduro 2437 Angular contact, Grade5 balls, ABEC5 Assembly 68mm version cannot be used for MTN Cranks! R ROAD 68mm BB30/PF30 SHIMANO R ROAD 68mm OSBB SHIMANO ( 14/earlier SBC road) R ROAD 68mm BB30/PF30 SHIMANO CERAMIC R MTN 73mm BB30/PF30 SHIMANO R MTN 73mm BB30/PF30 SHIMANO CERAMIC SRAM GXP/M24 TO BB30/PF30 - CONVERSION BB New updated design with rubber expanding collet. For steel spindle Praxis M24, Oval Concepts M24, and SRAM Gxp cranks 68MM is for Road bikes only 73mm is for MTN bikes only. Designed precisely to SRAM GXP bearing stance & chain line spec. Forged & machined heat-treated 7075 T6 Aluminum Enduro 2437 Drive /2237ER Non-Drive steel bearings 68mm version cannot be used for MTB Cranks! R ROAD 68mm BB30/PF30 SRAM GXP/M R MTN 68mm BB30/PF30 SRAM GXP/M24 (For older SBC Carbon OSBB 61.5mm road bikes, add TP-3002) CAMPAGNOLO ULT TO BB30/PF30 - CONVERSION BB For Campagnolo / Fulcrum UltraTorque cranks only Designed precisely to Campy ULT bearing stance & chain line spec. Forged & machined heat-treated 7075 T6 Aluminum For 68mm Road BB30, PF30 Non drive wavy washer and drive side outer clip included Bearings not included as they are pressed on your Campy ULT crank ROAD 68mm BB30/PF30 CAMPAGNOLO ULT (For older SBC Carbon OSBB 61.5mm road bikes, add TP-3002)

17 Shimano Threaded BOTTOM BRACKETS SHIMANO - BSA THREADED Machined Aluminum cups For installing Shimano Hollowtech II cranks into BSA threaded frames Cartridge Enduro 2437 steel with high grade grease and fill 68mm version for Road / 68/73mm version for MTN mm ROAD BSA THREADED SHIMANO ROAD /73mm MTN BSA THREADED SHIMANO MTN SHIMANO - T47 THREADED (External Bearing) Machined Aluminum cups For installing Shimano Hollowtech II cranks into T47 threaded frames Cartridge Enduro 2437 steel with high grade grease and fill 68/73mm version for both Road and MTN /73mm T47 ROAD/MTN SHIMANO

18 SPARE PARTS / TOOLS M30 TOOL - SOCKET SET (2pk) FOR PRAXIS M30/M30 THRU BOTTOM BRACKETS ONLY This is NOT the tool for our Shimano/SRAM/Campy Conversion BB For the Praxis M30 BB s and the new M30 THRU BB30/PF30 BB s Sold as a 2pack of M30 BB tool. Tool interface is for 3/8 drive socket *2 tools are required for installation/removal of Rubber Collet version BB s TP-0030 M30 SOCKET TOOL (2PK) M30 TOOL - WRENCH (single) FOR PRAXIS M30/M30 THRU BOTTOM BRACKETS ONLY This is NOT a tool for our Shimano/SRAM/Campy Conversion BB Only for use with Praxis M30/M30 THRU BSA, M30 BB30/PF30 TP-0030 M30 WRENCH (SINGLE) PF SLEEVES - PF30 or OSBB Replacement delrin PF30 sleeve for Praxis Conversion BB s / Collet BB s Great if you move Conv/Collet BB from one type of frame to another Choose 68mm if you have a 68mm Road Conversion Choose 73mm if you have a 73mm MTB Conversion Choose OSBB if you have a 68mm Road Conversion and installing the BB on a 2014 or earlier Specialized Road frame TP mm PF30 SLEEVE TP mm PF30 SLEEVE TP mm OSBB SLEEVE (2014 or earlier Specialized Road frame) CONV BB - O-RING (single) Replacement width tolerance O-Ring for Non-Drive side of your original BB Must be installed on the Non-Drive side cup For the Non-Drive cup to compensate for frame shell width discrepancies CONV BB O-RING

19 SPARE PARTS / TOOLS SHIMANO SEAL KIT Replacement pair of seals for our Praxis BB s for Shimano cranks. Used on BSA, T47 and Conversion BB for Shimano. Pair of Orange Seals TP-3001 SHIMANO SEAL KIT M24/GXP SEAL KIT Replacement seal kit for our Praxis M24 bottom brackets. Pair of seals and wave washer TP-3003 M24/GXP SEAL KIT M30 BB DUST COVER KIT Replacement alloy dust covers/spacers for Praxis M30/M30 THRU BB s. Kit includes all covers/parts for all versions M30 & M30 THRU TP-3030 M30 DUST COVERS KIT CHAINRING BOLTS - ROAD Praxis road chainring bolts - Black Aluminum 5 & 6mm Allen Torque to 10Nm M8.5 x 0.75 spec TP-0001

20 2mm M30 BB90 ( B) 2mm M30 BB92 ( B) M30 73mm PF30/BB30 ( R) M30 68/73mm T47 ( ) M30 68/73mm BSA ( B) NDS COVER (28mm ID) BB Model (Praxis Part Number) 104 or 94BCD M30 MTB Models - CADET / GIRDER 5mm 2mm M30 BB90 ( B) 2mm 2mm Preload Ring M30 THRU BB90 ( ) 2mm 2mm M30 BB92 ( B) 1mm M30 THRU BB92 ( ) 2mm M30 73mm PF30/BB30 ( R) 1mm M30 THRU 73mm PF30/BB30 ( R) 2mm M30 68/73mm T47 ( ) 1mm Crank Preload Ring acts as M30 THRU 68/73mm T47 ( ) 2mm M30 68/73mm BSA ( B) 1mm M30 THRU 68/73mm BSA ( ) DS COVER (30mm ID) NDS COVER (28mm ID) BB Model (Praxis Part Number) DS COVER (30mm ID) NDS COVER (30mm ID) BB Model (Praxis Part Number) Direct Mount Direct Mount M30 MTB DIRECT MOUNT Models - CADET DM / GIRDER DM / GIRDER CARBON M30 THRU MTB Models - LYFT/LYFT HD Praxis Works, LLC 207 MCPHERSON ST. SUITE E. SANTA CRUZ, CA DUST COVER SETUP CHART DS COVER (30mm ID) 2mm 2mm 2mm 1mm 2mm

21 2mm NDS COVER (28mm ID) 110 or 130BCD M30 386EVO ( ) 2mm M30 386EVO ( ) 1mm M30 BB86 ( B) 2mm 2mm M30 BB86 ( B) 1mm M30 BBRight ( ) ( R) ( R) 2mm M30 BBRight ( ) 1mm M30 68mm PF30/BB30 ( R) 2mm M30 68mm PF30/BB30 ( R) 1mm M30 68/73mm T47 ( ) 2mm M30 68/73mm T47 ( ) 1mm M30 68mm BSA ( B) 2mm M30 68mm BSA ( B) 1mm BB Model (Praxis Part Number) DS COVER (30mm ID) NDS COVER (28mm ID) BB Model (Praxis Part Number) DS COVER (30mm ID) Direct Mount M30 ROAD Models - ALBA / ZAYANTE M30 ROAD DIRECT MOUNT Models - ALBA DM / ZAYANTE DM / ZAYANTE CARBON Praxis Works, LLC 207 MCPHERSON ST. SUITE E. SANTA CRUZ, CA DUST COVER SETUP CHART

22 1.7mm C-Clip Cover 1.7mm C-Clip Cover 1.7mm C-Clip Cover 1.7mm C-Clip Cover NDS COVER (22mm ID) 104 or 94BCD M24 BB92 ( ) 3.7mm Cover 1.7mm C-Clip Cover M24 BB92 ( ) 2.0mm Cover M24 BB90 ( ) 6.8mm Cover 1.7mm C-Clip Cover M24 BB90 ( ) 3.7mm Cover M24 73mm PF30/BB30 ( R) ( R) ( R) 3.7mm Cover 1.7mm C-Clip Cover M24 73mm PF30/BB30 ( R) 2.0mm Cover M24 68/73mm BSA ( ) 3.7mm Cover 1.7mm C-Clip Cover M24 68/73mm BSA ( ) 2.0mm Cover BB Model (Praxis Part Number) DS COVER (24mm ID) NDS COVER (22mm ID) BB Model (Praxis Part Number) DS COVER (24mm ID) Direct Mount M24 MTB Models - CADET M24 MTB DIRECT MOUNT Models - CADET DM / GIRDER DM Praxis Works, LLC 207 MCPHERSON ST. SUITE E. SANTA CRUZ, CA DUST COVER SETUP CHART

23 1.7mm C-Clip Cover 1.7mm C-Clip Cover 1.7mm C-Clip Cover NDS COVER (28mm ID) 110 or 130BCD M24 BB86 ( ) 2.0mm Cover 2mm M24 BB86 ( ) 2.0mm Cover M24 68mm PF30/BB30 ( ) ( R) ( R) 2.0mm Cover M24 68mm PF30/BB30 ( ) 2.0mm Cover M24 68mm BSA ( ) 2.0mm Cover M24 68mm BSA ( ) 2.0mm Cover BB Model (Praxis Part Number) DS COVER (30mm ID) NDS COVER (28mm ID) BB Model (Praxis Part Number) DS COVER (30mm ID) Direct Mount M24 ROAD Models - ALBA / ZAYANTE M24 ROAD DIRECT MOUNT Models - ALBA DM Praxis Works, LLC 207 MCPHERSON ST. SUITE E. SANTA CRUZ, CA DUST COVER SETUP CHART

24 Apr 2018 Rev C Praxis BB Compatibility Guide BB/Frame Standard PRAXIS M30 PRAXIS M30 THRU PRAXIS M24/ SRAM GXP Praxis Road Praxis MTN Praxis Road Praxis MTN Praxis Road Praxis MTN BB30 68mm Road M30 68mm PF30/BB30 ( R) M24 68mm PF30/BB30 ( R) 73mm MTN M30 73mm PF30/BB30 ( R) M30 THRU 73mm PF30/BB30 ( R) M24 73mm PF30/BB30 ( R) PF30 68mm Road M30 68mm PF30/BB30 ( R) M24 68mm PF30/BB30 ( R) 73mm MTN M30 73mm PF30/BB30 ( R) M30 THRU 73mm PF30/BB30 ( R) M24 73mm PF30/BB30 ( R) Older OSBB Specialized Road 2014 and older M30 68mm PF30/BB30 ( R) TP-3002 M24 68mm PF30/BB30 ( R) TP or 73 Centered BSA M30 68/73mm BSA ( B) M30 68/73mm BSA ( B) M30 THRU 68/73mm BSA ( ) M30 THRU 68/73mm BSA ( ) M24 68/73mm BSA ( ) M24 68/73mm BSA ( ) BB86 (Road) 86.5 M30 BB86/90/92 ( B) M30 THRU BB86/90/92 ( ) M24 BB86/90/92 ( ) BB90 (MTN) M30 BB86/90/92 ( B) M30 THRU BB86/90/92 ( ) M24 BB86/90/92 ( ) BB92 (MTN) M30 BB86/90/92 ( B) M30 THRU BB86/90/92 ( ) M24 BB86/90/92 ( ) 386 EVO M30 386EVO ( ) 68 or 73 Centered T47 (External Bearing) M47 x 1.0 Threaded M30 68/73mm T47 ( ) M30 68/73mm T47 ( ) BBRight M30 BBRight ( R) BB Images are for reference only. Please see the BB instructions included with your BB for your specific setup. PRAXIS M30 Spindle PRAXIS M30 THRU Spindle PRAXIS M24/SRAM GXP Spindle 24mm RH Drive Side (RH) Spindle Diameter Non-Drive Side (LH) Spindle Diameter 22mm LH 30mm RH Drive Side (RH) Spindle Diameter Non-Drive Side (LH) Spindle Diameter 30mm LH 30mm RH Drive Side (RH) Spindle Diameter Non-Drive Side (LH) Spindle Diameter 28mm LH

25 46 Apr 2018 Rev C Praxis BB Compatibility Guide BB/Frame Standard SRAM GXP CRANKS RACE FACE / EASTON / ROTOR CRANKS SHIMANO CRANKS Road MTN Road MTN Road MTN BB30 68mm Road M24 68mm PF30/BB30 ( R) Shimano 68mm PF30/BB30 ( R) 73mm MTN M24 73mm PF30/BB30 ( R) M30 THRU 73mm PF30/BB30 ( R) Shimano 73mm PF30/BB30 ( R) PF30 68mm Road M24 68mm PF30/BB30 ( R) Shimano 68mm PF30/BB30 ( R) 73mm MTN M24 73mm PF30/BB30 ( R) M30 THRU 73mm PF30/BB30 ( R) Shimano 73mm PF30/BB30 ( R) Older OSBB Specialized Road 2014 and older M24 68mm PF30/BB30 ( R) TP-3002 Shimano 68mm PF30/BB30 ( R) ( R) TP or 73 Centered BSA M24 68/73mm BSA ( ) M24 68/73mm BSA ( ) M30 THRU 68/73mm BSA ( ) M30 THRU 68/73mm BSA ( ) Shimano Road 68mm BSA ( ) Shimano MTN 68/73mm BSA ( ) BB86 (Road) 86.5 M24 BB86/90/92 ( ) M30 THRU BB86/90/92 ( ) BB90 (MTN) M24 BB86/90/92 ( ) M30 THRU BB86/90/92 ( ) BB92 (MTN) M24 BB86/90/92 ( ) M30 THRU BB86/90/92 ( ) 68 or 73 Centered T47 (External Bearing) M47 x 1.0 Threaded Shimano 68/73mm T47 ( ) Shimano 68/73mm T47 ( ) BB Images are for reference only. Please see the BB instructions included with your BB for your specific setup. DMR Cranks DMR Cranks use a proprietary version of the M30 BB that is available through DMR OVAL Concepts OVAL Concepts cranks use the Praxis M24 or M30 BB system BOX BOX uses Praxis M30 and BOX M35 BBs. Please contact BOX directly for a replacement M35 BB. INFOCRANK Infocrank Cranks from Verve utilize the Praxis M30 BB system Campagnolo Campagnolo Ultra Torque cranks use the the Praxis ULT-BB30/ PF30 BB

26 Apr 2018 Rev C Praxis BB Standards Guide BSA Threads Road 68mm BSA BSA Threads Road 68mm PF Road 68mm BB Road 386EVO BSA Threads BSA Threads M47x1.0mm BSA Threads Threaded MTN 73mm BSA MTN 73mm PF MTN 73mm BB T47 68/73mm 68 or 39 73mm 68 Centered BSA Threads Road BB MTN BB MTN BB Road BBRight

27 BB30/PF30 VIP NOTES * YOU MUST VISUALLY INSPECT YOUR BB30/PF30 FRAME FOR OBSTRUCTIONS * BB30 frames must have removable C-clips for Conversion BB to be able to press in. Frame shell cannot have any inner shell obstructions that prevent BB from installing. DO NOT Modify! If you are unsure of your specific frame shell, please contact your frame manufacturer. EXAMPLE OF POTENTIAL OBSTRUCTIONS... These will prevent Praxis unit from being installed. Non-Removable Machined lip Non-Removable Carbon lip Cable guide poking up through e-wiring NOTES

28 BICYCLE COMPONENTS CHAIN RING INSTALLATION GUIDE TRADITIONAL 5-ARM MOUNT 4-ARM WITH HIDDEN 5TH MOUNT 4-ARM PRAXIS X-SPIDER (Clover and Buzz Rings) (Buzz Rings Only) (X Rings Only) CHAIN RING INSTALLATION The Praxis Works chain rings are matched sets and smooth shifting will not be possible if the chain rings are incorrectly installed. Be sure to install the chain rings in the correct positions as the graphics above show. CROSS GEARING SMALL/SMALL When the chain is in the position shown at the right, the chain may contact the front chain rings or front derailleur and make noise. If the noise is a problem, shift the chain onto the next-larger rear sprocket or the one after. CROSS GEARING

29 SRAM - REFERENCE PHOTO Check your crank spindle as SRAM has different length versions SRAM CENTERLINE CENTERLINE 52mm 49mm Note - Do NOT install DM-A ring on short spindle SRAM cranks. DM-A RING = 52mm BOOST DM-B RING = 49mm NON-BOOST SRAM LONG SPINDLE SRAM SHORT SPINDLE INSTALLED ON A SRAM LONG SPINDLE MTN CRANK INSTALLED ON A SRAM SHORT SPINDLE MTN CRANK CENTERLINE CENTERLINE 49mm 52mm DM-A RING = 49mm NON-BOOST DM-B RING = 52mm BOOST INSTALLED ON A PRAXIS MTN CRANK INSTALLED ON A PRAXIS MTN CRANK TECH GUIDE PRAXIS MTN DM-A DIRECT and DM-B MOUNT MTN RINGS CHAINLINE GUIDE REV A.

30