PIVOT SHUTTLE Dropper Post Cable Housing Replacement Maintenance Procedure

Size: px
Start display at page:

Download "PIVOT SHUTTLE Dropper Post Cable Housing Replacement Maintenance Procedure"

Transcription

1 PIVOT SHUTTLE Maintenance Procedure This maintenance guide provides detailed instructions to replace the dropper post cable housing on the Pivot Shuttle should something malfuction or break. If these steps are followed, the procedure can be completed without having to remove any of the components associated with the Shimano Steps E8000 E-bike system. All of the necessary steps are outlined below and accompanied with pictures to help explain each step. Maintenance Notes: Doing work on the motor and battery can be performed easier if the bike can be mounted upside down in a work stand. Many of the pictures in this guide will show the bike being worked on in this way. When working on the battery, the battery can be held in the frame by mounting the cover in the frame by the rear bolt with the battery facing outward. Performance. Redefined.

2 1 2 Using a 2mm allen wrench, remove the DS cable port cover at the head tube. Using a 4mm allen wrench, loosen the seat post collar. 3 4 Using a 2mm allen wrench, loosen the pinch bolt at the dropper remote to release the cable end. Cut the cable crimp off the dropper post cable. 5 6 Remove the seat post and unclip the head of the cable from the actuation cradle at the bottom of the seat post. Pull the cable out through the seat tube leaving the housing in the frame. 2

3 7 8 Remove the ferrules from both ends of the dropper post housing. To route the dropper post housing, use the Brake Routing Cable (BRC) from the Park Tool Internal Routing Kit (IR-1.2) Attach the BRC to the free end of the current dropper post housing where it exits the head tube. Pull the dropper post housing and the BRC attached through the frame and out the seat tube, leaving the BRC inside the frame Remove the current dropper post hosing from the BRC and use it to cut new dropper post housing to the correct length. Attach the new dropper post housing to the BRC at the end left hanging out of the seat tube. 3

4 13 14 Route the new dropper post housing through the front triangle by pulling the BRC back through the frame and out through head tube. Remove the BRC from the dropper post housing and put the ferrules on each end of the housing Remove the metal cable bushing from the cable head and feed the new cable through the hole in the bushing. Make sure the bushing is oriented so the cable head will sit in the bushing's counterbore. Feed the new cable through the housing starting from the end sticking out of the seat tube Seat the cable bushing into the actuation cradle and push the housing up to the housing stop on the bottom of the seat post. Grease the seat post. Do not use carbon paste; it can cause the seat post to seize in the seat tube. 4

5 19 20 Before installing the seat post, apply grease to the inside of the seat tube as well. This ensures proper coverage of grease between the seat post and seat tube. Install the seat post. Tighten the seat post collar to 3-5 Nm. Hold the cable and push on the housing to ensure it is properly seated on the base of the seat post Route the cable through dropper remote. Make sure to route the cable through the noodle as well, if you are using a remote that has one. Seat the housing into the remote and pull the cable tight. Tighten the pinch bolt using a 2mm allen wrench to 1.2 Nm Cycle the remote times to remove any slack from the cable. Loosen the pinch bolt and pull the cable tight. Retighten the pinch bolt to 1.2 Nm. Cut the cable to length, leaving 8mm past the pinch bolt. 5

6 25 26 Put a cable crimp on the cable end and tuck the cable end under the remote. Replace the cable port clamp on the head tube with the wire on top of the dropper post housing. Tighten the bolt so the wire and housing are held firmly in place. 27 Make sure there is enough slack in the housing outside the frame to allow the handle bars to turn freely. Loosen the clamp and adjust the slack as needed. 6

PIVOT SHUTTLE Chain Ring Replacement Maintenance Procedure

PIVOT SHUTTLE Chain Ring Replacement Maintenance Procedure PIVOT SHUTTLE Chain Ring Replacement Maintenance Procedure This maintenance guide provides detailed instructions to replace the chain ring of the Shimano Steps E8000 E-bike system should something malfuction

More information

TECH SHEET ORANGE PIVOT TOOL INSTRUCTIONS

TECH SHEET ORANGE PIVOT TOOL INSTRUCTIONS page 1 ORANGE PIVOT TOOL INSTRUCTIONS This is a guide of how to change the pivot bearings on an Orange frame with a bore style pivot axle. 4 8 Bore Type Pivot Axle Horiz-Hold Type Pivot Axle Please read

More information

EXTERNALLY ROUTED DROPPER POST owner S MANUAL

EXTERNALLY ROUTED DROPPER POST owner S MANUAL EXTERNALLY ROUTED DROPPER POST owner S MANUAL Introduction: This adjustable height seat post with internal cable routing allows for micro-adjustments using a remote handlebar mounted lever. The cable actuated

More information

2019 MADONE ASSEMBLY MANUAL

2019 MADONE ASSEMBLY MANUAL 2019 MADONE ASSEMBLY MANUAL 2019 MADONE Rim brakes and Di2 drivetrain Rim brakes and mechanical drivetrain Disc brakes and Di2 drivetrain Disc brakes and mechanical drivetrain TABLE OF CONTENTS Common

More information

UNPACKING AND ASSEMBLING YOUR DIAMONDBACK ROAD BIKE

UNPACKING AND ASSEMBLING YOUR DIAMONDBACK ROAD BIKE EMAIL SIGNUP BIKE REG SEARCH BIKES THE RIDE HEALTH FITNESS SKILLS SHOP MAINTENANCE CYCLING 101 RIDERS LIKE YOU TEAMS SUPPORT UNPACKING AND ASSEMBLING YOUR DIAMONDBACK ROAD BIKE 1. Begin by carefully cutting

More information

Technical Bulletin. Parts and Service News. LPG Lock-Off valve replacement procedures for 4.2 Liter Ford V6

Technical Bulletin. Parts and Service News. LPG Lock-Off valve replacement procedures for 4.2 Liter Ford V6 Equipment Affected Technical Bulletin LPG Lock-Off valve replacement procedures for 4.2 Liter Ford V6 Ford 4.2L V-6 powered tractors with LPG fuel systems. Part Description Discrepancy Fuel Pressure Lock-off

More information

2019 MADONE ASSEMBLY MANUAL

2019 MADONE ASSEMBLY MANUAL 2019 MADONE ASSEMBLY MANUAL 2019 MADONE Rim brakes and Di2 drivetrain Disc brakes and Di2 drivetrain Rim brakes and mechanical drivetrain Disc brakes and mechanical drivetrain TABLE OF CONTENTS Common

More information

ROAD DISC TECHNICAL MANUAL

ROAD DISC TECHNICAL MANUAL ROAD DISC TECHNICAL MANUAL INTRODUCTION Congratulations on purchasing a Felt disc brake equipped road bike. As with all of our bikes and components, our aim is to provide the rider with the best product

More information

Final Assembly Instructions Bikes with Threaded Headsets

Final Assembly Instructions Bikes with Threaded Headsets Final Assembly Instructions Bikes with Threaded Headsets Thank you for buying your new bicycle from L.L.Bean. Read these instructions carefully before beginning the final assembly. Prior to shipping, our

More information

GALLIUM PRO 210A: ASSEMBLY GUIDE

GALLIUM PRO 210A: ASSEMBLY GUIDE GALLIUM PRO 210A: ASSEMBLY GUIDE Revision 5.0-05-23-2017 GALLIUM PRO 210A: Table of contents Assembly overview...2-3 1. Frame inspection...4 2. Headset installation...5 3. Cables & housing installation...6-9

More information

SANTANA STOWAWAY TANDEM WITH AIRLINER SAFECASE AND FTS FOAM TRAY SYSTEM ASSEMBLY AND DISASSEMBLY

SANTANA STOWAWAY TANDEM WITH AIRLINER SAFECASE AND FTS FOAM TRAY SYSTEM ASSEMBLY AND DISASSEMBLY SANTANA STOWAWAY TANDEM WITH AIRLINER SAFECASE AND FTS FOAM TRAY SYSTEM ASSEMBLY AND DISASSEMBLY Congratulations! You are now the proud owner of the world s most travel-ready, performance tandem. The following

More information

Rocky Mountain Element Technical Manual. Rev B

Rocky Mountain Element Technical Manual. Rev B Rocky Mountain Element Technical Manual Rev B 1 Table of Contents Materials Required... 3 Suspension Pivot Torque Guide... 4 Small Parts Torque Guide... 5 Assembly Instructions... 6 1) Bearing Installation...

More information

Final Assembly Instructions Bikes with Quill Stems

Final Assembly Instructions Bikes with Quill Stems Final Assembly Instructions Bikes with Quill Stems Thank you for buying your new bicycle from L.L.Bean. Read these instructions carefully before beginning the final assembly. Prior to shipping, our expert

More information

FRAME FEATURES TABLE OF CONTENTS INTRODUCTION. A guide to your Cervélo C Series frame.

FRAME FEATURES TABLE OF CONTENTS INTRODUCTION. A guide to your Cervélo C Series frame. C SERIES MANUAL TABLE OF CONTENTS Introduction...1 Frame Features...2 Fork Preparation...3 Small Parts...5 Frame Preparation...6 Brake Housing Installation...7 Mechanical Cable Routing...9 Electric Cable

More information

Have questions? Chat with us live at raleighusa.com or call us at , 8am 5pm PST

Have questions? Chat with us live at raleighusa.com or call us at , 8am 5pm PST 1 2 Have questions? Chat with us live at raleighusa.com or call us at 1-800-251-8435, 8am 5pm PST The bicycle you have purchased is a complex piece of equipment that must be properly assembled and maintained

More information

TABLE OF CONTENTS FRAME FEATURES INTRODUCTION

TABLE OF CONTENTS FRAME FEATURES INTRODUCTION S3 DISC MANUAL TABLE OF CONTENTS Introduction...1 Frame Features...2 Fork Preparation...3 Small Parts...5 Frame Preparation...6 Brake Housing Installation...7 Mechanical Cable Routing...9 Electric Cable

More information

SUPPLEMENTARY MANUAL

SUPPLEMENTARY MANUAL SUPPLEMENTARY MANUAL TABLE OF CONTENTS Introduction...1 Features diagram...2 Getting started...3 Fork...3 Derailleur cables...3 Rear brake...9 Replaceable Rear Derailleur mount...10 Using your Cervélo

More information

HoldUp Plus2. Safety Kit included: See additional instructions for installation. REAR WHEEL TRAY. BASE (1x) lock WASHER (1x) KEY (2x) SAFETY CLIP (1x)

HoldUp Plus2. Safety Kit included: See additional instructions for installation. REAR WHEEL TRAY. BASE (1x) lock WASHER (1x) KEY (2x) SAFETY CLIP (1x) HoldUp Plus2 InsTAll This product on 2" hitch version of the HoldUp Front WHEEL TRAY assembly (1x) REAR WHEEL TRAY assembly (1x) wrench (1x) BASE (1x) bolt (8X) Lock WASHER (8X) Washer (8x) KEY (2x) SAFETY

More information

Final Assembly Instructions Bikes with Threaded Headsets

Final Assembly Instructions Bikes with Threaded Headsets Final Assembly Instructions Bikes with Threaded Headsets Thank you for buying your new bicycle from L.L.Bean. Read these instructions carefully before beginning the final assembly. Prior to shipping, our

More information

GALLIUM PRO: ASSEMBLY GUIDE

GALLIUM PRO: ASSEMBLY GUIDE GALLIUM PRO: ASSEMBLY GUIDE Revision 2.0-04-08-2016 GALLIUM PRO : Table of contents Assembly overview..........................2-3 1. Frame inspection........................4 2. Headset installation.......................5

More information

Rocky Mountain Instinct / Pipeline Alloy Frame Assembly Guide. Date: April 7, 2017

Rocky Mountain Instinct / Pipeline Alloy Frame Assembly Guide. Date: April 7, 2017 Rocky Mountain Instinct / Pipeline Alloy Frame Assembly Guide Date: April 7, 2017 1 Table of Contents Front Triangle Preparation... 4 Parts Needed... 4 Instructions... 4 Chain Stay Preparation... 6 Parts

More information

Shimano Di2 Installation on S5

Shimano Di2 Installation on S5 Installing Shimano Dura Ace Di2 Shifting Systems Note these instructions and pictures are for assembling the Shimano Dura Ace Di2 system (Internal Spec) on the Cervélo S5 frame. The Shimano Ultegra Di2

More information

VERSA BIKE RACK INSTRUCTIONS

VERSA BIKE RACK INSTRUCTIONS VERSA BIKE RACK INSTRUCTIONS Models #8, 8 Important This rack is designed for use with a or. receiver hitch. The rack is designed to hold a maximum of two bicycles. Do not use it for anything other than

More information

Have questions? Chat with us live at raleighusa.com or call us at , 8am 5pm PST

Have questions? Chat with us live at raleighusa.com or call us at , 8am 5pm PST 1 2 Have questions? Chat with us live at raleighusa.com or call us at 1-800-251-8435, 8am 5pm PST The bicycle you have purchased is a complex piece of equipment that must be properly assembled and maintained

More information

Rock. ky Altit. ude. Rev B

Rock. ky Altit. ude. Rev B Rock ky Mountain Altit ude Technical Manual Date: August 17 th, 2016 Rev B 1 Table of Contents Materials Required... 3 Suspension Pivot Torque Guide... 4 Small Parts Torque Guide... 5 Assembly Instructions...

More information

Parts: Included in the parts box: Inner Rear Tire Tray. Inner Front Tire Tray. Trail Doc Clamp. Pivot Assembly. Trail Doc Post.

Parts: Included in the parts box: Inner Rear Tire Tray. Inner Front Tire Tray. Trail Doc Clamp. Pivot Assembly. Trail Doc Post. NV 2.0 2 Parts: Outer Front Tire Tray Inner Front Tire Tray Outer Rear Tire Tray Inner Rear Tire Tray Pivot Assembly Trail Doc Clamp Trail Doc Post Included in the parts box: 6mm Allen Wrench M6 Lock Washer

More information

EZee Glider Manual. Tools needed for Assembly: Wrench (included) Philips Screwdriver (not included) Assembly Instructions

EZee Glider Manual. Tools needed for Assembly: Wrench (included) Philips Screwdriver (not included) Assembly Instructions EZee Glider Manual Congratulations on your purchase of the EZee Glider! Your glider is designed for years of nearly carefree use by your child. These instructions include how to set up your glider and

More information

SANTA CRUZ BICYCLES Cable Routing Procedure MY17

SANTA CRUZ BICYCLES Cable Routing Procedure MY17 SANTA CRUZ BICYCLES Cable Routing Procedure MY17 Copyright Santa Cruz Bicycles 2017 TABLE OF CONTENTS SAFETY INSTRUCTIONS... 3 CABLE ROUTING... 3 INTRODUCTION...3 TOOLS AND SUPPLIES...3 REAR DERAILLEUR

More information

GALLIUM PRO 259A & 259B: ASSEMBLY GUIDE

GALLIUM PRO 259A & 259B: ASSEMBLY GUIDE GALLIUM PRO 259A & 259B: ASSEMBLY GUIDE GALLIUM PRO 259A & 259B: Table of Contents 1. Tools Needed and First Aid Kit... 3 2. Sizing Chart... 4 3. Trouble-shooting / Tips... 5 4. Seat Post Collar Assembly...

More information

HEIGHT ADJUSTABLE SEATPOST USER MANUAL

HEIGHT ADJUSTABLE SEATPOST USER MANUAL HEIGHT ADJUSTABLE SEATPOST USER MANUAL This user manual covers the following models: Supernatural, Supernatural Remote, Supernatural Beam, Supernatural 272, Supernatural 272 Remote, Dropzone, Dropzone

More information

1 Electronic Wiring. Felt IA Owner s Manual. CalPac / AeroPac Installation... Pg Note:

1 Electronic Wiring. Felt IA Owner s Manual. CalPac / AeroPac Installation... Pg Note: Felt IA Owner s Manual 1 2 3 4 5 6 7 8 Introduction................. Pg. 3 Fit Chart................... Pg. 4 Electronic Wiring.............. Pg. 5-15 Mechanical Cabling............. Pg. 16-24 Fork Installation...............

More information

comfort without compromising on performance and to fit your various needs on touring,

comfort without compromising on performance and to fit your various needs on touring, Congratulations on your purchase of Goal-26X. Goal-26X is made to enhance comfort without compromising on performance and to fit your various needs on touring, shopping and communicating. Let s have fun

More information

KRYPTON X ROAD : ASSEMBLY GUIDE

KRYPTON X ROAD : ASSEMBLY GUIDE KRYPTON X ROAD : ASSEMBLY GUIDE Revision 3.0-06-01-2016 KRYPTON X ROAD : Table of contents Assembly overview.........................2 1. Frame inspection........................3 2. Headset installation.......................4

More information

Mini Glider Manual. Your Glider comes partially assembled. The front wheel and the handlebars require assembly.

Mini Glider Manual. Your Glider comes partially assembled. The front wheel and the handlebars require assembly. Mini Glider Manual Congratulations on your purchase of the Mini Glider! Your glider is designed for years of nearly carefree use by your child. These instructions include how to set up your glider and

More information

E-116 Assembly Guide

E-116 Assembly Guide E-116 Assembly Guide Table of Contents Overview of the assembly.... 2 1. Cable housing installation.... 3 2. Front brake installation.... 4 3. Rear brake installation... 5-6 4. Seatpost installation....

More information

CRUZBIKE Quest 2.0 Assembly

CRUZBIKE Quest 2.0 Assembly CRUZBIKE Quest 2.0 Assembly CRUZBIKE Quest 2.0 Assembly... 1 General notes on assembly... 2 Un box and evaluate the frame and major parts... 2 Unfold the rear swing arm and arrange the frame... 3 Rear

More information

Rocky Mountain Instinct / Pipeline Frame Assembly Guide. Date: March 31, 2017

Rocky Mountain Instinct / Pipeline Frame Assembly Guide. Date: March 31, 2017 Rocky Mountain Instinct / Pipeline Frame Assembly Guide Date: March 31, 2017 1 Table of Contents Front Triangle Preparation... 4 Parts Needed... 4 Instructions... 4 Chain Stay Preparation... 6 Parts Needed...

More information

FACTORBIKES.COM. Assembly Manual V2.20

FACTORBIKES.COM. Assembly Manual V2.20 FACTORBIKES.COM V2.20 Introduction I Limited Lifetime Warranty On Bicycles And Framesets I Necessary Tools 01 Instructions 01 1 Seatpost 01 2 Di2 Cable Routing 03 3 Fork - Headset Barstem 05 4 Cutting

More information

ST Shimano Total Integration. Technical Service Instructions. General Safety Information SI-6CT0B

ST Shimano Total Integration. Technical Service Instructions. General Safety Information SI-6CT0B Technical Service Instructions SI-6CT0B t ST-4400 Shimano Total Integration Shimano Total Integration Features The Shimano Total Integration TIAGRA series features a dual action control lever which actuates

More information

RADON 237A: ASSEMBLY GUIDE. Revision Valid for MY2017 Radon

RADON 237A: ASSEMBLY GUIDE. Revision Valid for MY2017 Radon RADON 237A: ASSEMBLY GUIDE Revision 3.0-05-29-2017 - Valid for MY2017 Radon RADON 237A: Table of Contents 1. Tools Needed and First Aid Kit... 3 2. Sizing Chart... 4 3. Seat Post Collar Assembly... 5 4.

More information

To save this document, scroll up and select the download icon

To save this document, scroll up and select the download icon Thank you for purchasing a RustySpokes Softcruise. We know you are going to enjoy the bike, but if you had it shipped to you, there are a few things you need to do to assemble the bike. The seat, pedals

More information

I.H.S INSTALLATION INSTRUCTIONS

I.H.S INSTALLATION INSTRUCTIONS I.H.S INSTALLATION INSTRUCTIONS TOOLS REQUIRED The following tools will be required for installation of your I.H.S. system. Item Qty Needed 9/16 Open End Wrench 2 3/4 Open End Wrench 1 1/2 Open End Wrench

More information

Assembly Tools. Assembly will take 1-2 hours

Assembly Tools. Assembly will take 1-2 hours Assembly Tools Included in your parts box: Pedals Quick release skewer Reflectors (if not already installed) Toolkit (4+5mm combo Allen wrench, 13+15mm combo open-end wrench) Helpful Tools: Scissors (for

More information

R5 RIM MANUAL EN. Version 1 I

R5 RIM MANUAL EN. Version 1 I R5 RIM MANUAL EN Version 1 I 28.04.2017 TABLE OF CONTENTS Introduction...1 Frame Features...2 Fork Preparation...3 Small Parts...5 Frame Preparation...6 Mechanical Cable Routing...7 Electric Cable Routing...9

More information

NITROGEN DISC 286A: ASSEMBLY GUIDE

NITROGEN DISC 286A: ASSEMBLY GUIDE NITROGEN DISC 286A: ASSEMBLY GUIDE Valid for MY2019 Nitrogen Disc 286A Revision 1.0-07-26-2018 NITROGEN DISC 286A: Table of Contents 1. Tools Needed and First Aid Kit...3 2. Frameset inspection...4 3.

More information

LITERIDER 2&3 IMPORTANT WARNING. 2Bike (1x) Bolt (1x) Nut (1x) Small Hex Wrench (1x)

LITERIDER 2&3 IMPORTANT WARNING. 2Bike (1x) Bolt (1x) Nut (1x) Small Hex Wrench (1x) LITERIDER 2&3 3 Bike (1x) Bolt (1x) Flat Washer (2x) Nut (1x) Large Hex Wrench (1x) 2Bike (1x) wrench (1x) Small Hex Wrench (1x) keys (2x) Long Strap (1x) 2-Zip Strips (6x) 3-Zip Strips (9x) Wheel strap

More information

Final Assembly Instructions Bikes with 16 Wheel Size

Final Assembly Instructions Bikes with 16 Wheel Size Final Assembly Instructions Bikes with 16 Wheel Size Thank you for buying your new bicycle from L.L.Bean. Read these instructions carefully before beginning the final assembly. Prior to shipping, our expert

More information

WINCH MOUNT KIT OWNER S MANUAL

WINCH MOUNT KIT OWNER S MANUAL WINCH MOUNT KIT For KAWASAKI ATVs OWNER S MANUAL MODEL NUMBER: 25-2150 CUSTOMER MUST RECEIVE A COPY OF THIS OWNER S MANUAL AT TIME OF SALE 2005 Cycle Country Accessories Corp. 4/10/12 MAN0097 9 Please

More information

R5 DISC MANUAL EN. Version 1 I

R5 DISC MANUAL EN. Version 1 I R5 DISC MANUAL EN Version 1 I 30.04.2017 TABLE OF CONTENTS Introduction...1 Frame Features...2 Fork Preparation...3 Small Parts...5 Frame Preparation...6 Brake Housing Installation...7 Mechanical Cable

More information

ASSEMBLY GUIDE TRUE GRIT. LaufCycling.com

ASSEMBLY GUIDE TRUE GRIT. LaufCycling.com ASSEMBLY GUIDE TRUE GRIT LaufCycling.com Congratulations on your True Grit! We understand you are in a hurry to go riding a.s.a.p. - but please take a deep breath and read this installation guide first.

More information

Santa Fe Cycles Assembly Guide Introduction

Santa Fe Cycles Assembly Guide Introduction Santa Fe Cycles Assembly Guide Introduction Congratulations on your purchase of your new Santa Fe bicycle. You have purchased a bicycle that has many features and qualities. Please take a few minutes and

More information

HOME ASSEMBLY INSTRUCTIONS

HOME ASSEMBLY INSTRUCTIONS HOME ASSEMBLY INSTRUCTIONS This Papillionaire Bicycle now belongs to you. It will take you to work, wait patiently outside your local cafe, and carry your groceries home. This is the start of your long-term

More information

Lectric Cycles Mid-Drive Electric Motor Installation

Lectric Cycles Mid-Drive Electric Motor Installation Lectric Cycles Mid-Drive Electric Motor Installation This write-up describes the installation of a Lectric Cycles electric motor. The model is the e-rad Mid-Drive 750 Watt conversion kit, installed on

More information

GALLIUM PRO : ASSEMBLY GUIDE

GALLIUM PRO : ASSEMBLY GUIDE GALLIUM PRO : ASSEMBLY GUIDE GALLIUM PRO : Table of contents Assembly overview..........................2-3 1. Frame inspection........................4 2. Headset installation.......................5

More information

#59114 Rola 2-Bike Rack Carrier (Shown Assembled) (A) (C) (B)

#59114 Rola 2-Bike Rack Carrier (Shown Assembled) (A) (C) (B) Use for Parts: #59114 Rola -Bike Rack System #59115 Rola 1-Bike Add-On TOOLS REQUIRED 10mm or 13/3 Socket & Wrench #59114 Rola -Bike Rack Carrier (Shown Assembled) Tray Attachment Hardware: (3) Plastic

More information

TABLE OF CONTENTS INTRODUCTION

TABLE OF CONTENTS INTRODUCTION R3 DISC MANUAL TABLE OF CONTENTS Introduction... 1 Frame Features... 2 Fork Preparation... 3 Small Parts... 5 Frame Preparation... 6 Brake Housing Installation... 7 Mechanical Cable Routing... 9 Electric

More information

KRYPTON X ROAD : ASSEMBLY GUIDE

KRYPTON X ROAD : ASSEMBLY GUIDE KRYPTON X ROAD : ASSEMBLY GUIDE KRYPTON X ROAD : Table of contents Assembly overview.........................2 1. Frame inspection........................3 2. Headset installation.......................4

More information

Preparation/Maintenance Manual

Preparation/Maintenance Manual Preparation/Maintenance Manual It is essential that you read this manual in its entirety before riding your bike for the first time to ensure that your bike is properly assembled and safe to ride. It is

More information

R3 RIM MANUAL EN. Version 1 I

R3 RIM MANUAL EN. Version 1 I R3 RIM MANUAL EN Version 1 I 07.02.2017 TABLE OF CONTENTS Introduction...1 Frame Features...2 Fork Preparation...3 Small Parts...5 Frame Preparation...6 Mechanical Cable Routing...7 Electric Cable Routing...9

More information

SECTION 1 UNPACKING INSTRUCTIONS

SECTION 1 UNPACKING INSTRUCTIONS ANDEAN USER GUIDE SECTION 1 UNPACKING INSTRUCTIONS 2 REMOVE PART BOX, ACCESSORY BOX AND SADDLE AND SEATPOST. SET ACCESORIES AND SEAT ASIDE FOR FINAL. PARTS BOX ACCESORY BOX 3 UNSTRAP WHEEL BLOCKS AND HANDLEBAR

More information

LEAP ASSEMBLY MANUAL. Rev 1A

LEAP ASSEMBLY MANUAL. Rev 1A LEAP ASSEMBLY MANUAL Rev 1A in the box BE MOVED Congratulations on purchasing an Xtracycle Leap DIY Cargo Bike Kit, and being one of the visionaries using the Leap to create your dream cargo- or passenger

More information

BRAND OVERVIEW 06 FRAME FEATURES 08 GEOMETRY 10 MAINTENANCE SCHEDULE 12 SETUP OVERVIEW 12 DERAILLEUR HANGER INSTALL 16 CABLE/LINE SETUP 18 TECHNICAL

BRAND OVERVIEW 06 FRAME FEATURES 08 GEOMETRY 10 MAINTENANCE SCHEDULE 12 SETUP OVERVIEW 12 DERAILLEUR HANGER INSTALL 16 CABLE/LINE SETUP 18 TECHNICAL BRAND OVERVIEW 06 FRAME FEATURES 08 GEOMETRY 10 MAINTENANCE SCHEDULE 12 SETUP OVERVIEW 12 DERAILLEUR HANGER INSTALL 16 CABLE/LINE SETUP 18 TECHNICAL ASSEMBLY OVERVIEW 22 EXPLODED VIEWS 30 REBUILD KITS

More information

GALLIUM: ASSEMBLY GUIDE

GALLIUM: ASSEMBLY GUIDE GALLIUM: ASSEMBLY GUIDE Revision 2.0-04-08-206 GALLIUM: Table of contents Assembly overview..........................2. Frame inspection........................3 2. Headset installation.......................4

More information

222 Schwinn Recumbent Exercise Bike Parts List Full Size Hardware Chart Product Illustration Assembly Instructions

222 Schwinn Recumbent Exercise Bike Parts List Full Size Hardware Chart Product Illustration Assembly Instructions 222 Schwinn Recumbent Exercise Bike Parts List Full Size Hardware Chart Product Illustration Assembly Instructions FITNESS SAFEGUARDS AND WARNINGS Before starting any exercise program, consult with your

More information

This is the Quick Start Guide for the Optibike Pioneer Allroad electric bicycle. The Guide provides for basic information required to ride the

This is the Quick Start Guide for the Optibike Pioneer Allroad electric bicycle. The Guide provides for basic information required to ride the This is the Quick Start Guide for the Optibike Pioneer Allroad electric bicycle. The Guide provides for basic information required to ride the Allroad. It is not intended to be an extensive manual. It

More information

FRONT DERAILLEUR 10/11x3

FRONT DERAILLEUR 10/11x3 FRONT DERAILLEUR 10/11x3 1 - TECHNICAL SPECIFICATIONS 52 52 2 - COMPATIBILITY WARNING! Different combinations from those included in the table could cause the malfunction of the drivetrain and result in

More information

FRAME FEATURES TABLE OF CONTENTS INTRODUCTION

FRAME FEATURES TABLE OF CONTENTS INTRODUCTION R3 MANUAL TABLE OF CONTENTS Introduction...1 Frame Features...2 Fork Preparation...3 Small Parts...5 Frame Preparation...6 Mechanical Cable Routing...7 Electric Cable Routing...9 Seatpost Assembly & Installation...11

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS KIT CONTENTS: PART NUMBER: DESCRIPTION: E361SXA300 ROOF MOUNT BICYCLE CARRIER B9 TRIBECA Short Carriage Bolt Long Carriage Bolt 3x Over-Molded Wrench Button Head Screw 2x Washer

More information

Front derailleur. Dealer's Manual DURA-ACE FD-R9100 ULTEGRA FD-R FD ROAD MTB Trekking. City Touring/ Comfort Bike DM-RAFD001-03

Front derailleur. Dealer's Manual DURA-ACE FD-R9100 ULTEGRA FD-R FD ROAD MTB Trekking. City Touring/ Comfort Bike DM-RAFD001-03 (English) DM-RAFD001-03 Dealer's Manual ROAD MTB Trekking City Touring/ Comfort Bike URBAN SPORT E-BIKE Front derailleur DURA-ACE FD-R9100 ULTEGRA FD-R8000 105 FD-5801 Procedures for cable tension adjustment

More information

USER S MANUAL QUESTIONS? CAUTION. Model No. FMEX Serial No. Write the serial number in the space above for reference. Serial Number Decal

USER S MANUAL QUESTIONS? CAUTION. Model No. FMEX Serial No. Write the serial number in the space above for reference. Serial Number Decal Model No. FMEX81110.0 Serial No. Write the serial number in the space above for reference. USER S MANUAL Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, please

More information

Thank you for purchasing a WIKE BOX BIKE!

Thank you for purchasing a WIKE BOX BIKE! Thank you for purchasing a WIKE BOX BIKE! Contents Safety.....3 Front wheel.4 Kickstand..5 Handle Bar & Box 6 Seat post and Saddle 7 Final pre-ride check 8 Tools needed to assemble Bike: -High table or

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS KIT CONTENTS: INSTALLATION INSTRUCTIONS PART NUMBER: DESCRIPTION: E361SXA302 roof MOUNT BICycle CARRIER SINGLE Short Carriage Bolt 1x Long Carriage Bolt 3x Over-Molded Wrench 1x Button Head Screw 2x Washer

More information

Have questions? Chat with us live at raleighusa.com or call us at , 8am 5pm PST

Have questions? Chat with us live at raleighusa.com or call us at , 8am 5pm PST 1 2 Have questions? Chat with us live at raleighusa.com or call us at 1-800-251-8435, 8am 5pm PST The bicycle you have purchased is a complex piece of equipment that must be properly assembled and maintained

More information

1. General Safety Information. Silvio V2.2 Assembly Instructions Assembly. Adjust to the rider.

1. General Safety Information. Silvio V2.2 Assembly Instructions Assembly. Adjust to the rider. Silvio V. Assembly Instructions support@cruzbike.com. General Safety Information WARNING to avoid serious injuries:. If you are unsure about fitting, testing and adjusting brakes or gearing on a bicycle,

More information

Front derailleur. Dealer's Manual SORA FD-R3000 FD-R3030 CLARIS FD-R2000 FD-R2030. ROAD MTB Trekking. City Touring/ Comfort Bike DM-RBFD001-01

Front derailleur. Dealer's Manual SORA FD-R3000 FD-R3030 CLARIS FD-R2000 FD-R2030. ROAD MTB Trekking. City Touring/ Comfort Bike DM-RBFD001-01 (English) DM-RBFD001-01 Dealer's Manual ROAD MTB Trekking City Touring/ Comfort Bike URBAN SPORT E-BIKE Front derailleur SORA FD-R3000 FD-R3030 CLARIS FD-R2000 FD-R2030 CONTENTS IMPORTANT NOTICE... 3 TO

More information

CANYON WORKSHOP: CORRECT PACKAGING FOR TRANSPORT

CANYON WORKSHOP: CORRECT PACKAGING FOR TRANSPORT Whether you're travelling or sending your bike in for a service, the Canyon BikeGuard is sturdy and can be used several times. It is of course necessary that you retain all the packaging material delivered

More information

Mounting Instructions 2010 Wolfman Expedition Dry Saddlebags or Teton Saddlebags to another brand of Rectangular Side Rack.

Mounting Instructions 2010 Wolfman Expedition Dry Saddlebags or Teton Saddlebags to another brand of Rectangular Side Rack. Mounting Instructions OTHER 2010 Wolfman Expedition Dry Saddlebags or Teton Saddlebags to another brand of Rectangular Side Rack. Thank You for purchasing our new 2010 Wolfman Products Please Note: The

More information

Road Chain Catcher Installation Instructions (K13-001, K13-006, K SL1, K SL2)

Road Chain Catcher Installation Instructions (K13-001, K13-006, K SL1, K SL2) Road Chain Catcher Installation Instructions (K13-001, K13-006, K13-001-SL1, K13-001-SL2) Description: The K-Edge Road Chain Catcher series is designed to eliminate chain drop on the lowest chainring due

More information

FACTORBIKES.COM. Assembly Manual DISC V1.05

FACTORBIKES.COM. Assembly Manual DISC V1.05 FACTORBIKES.COM V1.05 Introduction I Limited Lifetime Warranty On Bicycles And Framesets I Necessary Tools 01 Instructions 01 1 Seatpost 01 2 Cut the cable housing to the correct length 03 3 Di2 Cable

More information

FIRESTORM. Assembly Instructions. Electric Upgrade Kit for the Autococker. Designed & Manufactured by PGI

FIRESTORM. Assembly Instructions. Electric Upgrade Kit for the Autococker. Designed & Manufactured by PGI FIRESTORM Electric Upgrade Kit for the Autococker Assembly Instructions Designed & Manufactured by PGI Table of Contents Introduction 1 Safety 1 Parts Diagram 2 Parts Diagram Listing 2 Getting Started

More information

GALLIUM CS 281A: ASSEMBLY GUIDE. Revision Valid for MY2019 Gallium CS

GALLIUM CS 281A: ASSEMBLY GUIDE. Revision Valid for MY2019 Gallium CS GALLIUM CS 281A: ASSEMBLY GUIDE Revision 0.0-2018-05-04 - Valid for MY2019 Gallium CS GALLIUM CS 281B: ASSEMBLY GUIDE Revision 0.0-2018-05-04 - Valid for MY2019 Gallium CS GALLIUM CS 281A / 281B: Table

More information

REPLACING THE FRONT RIM OF CROSSMAX SLR DISC, CROSSMAX SL DISC 07 AND CROSSMAX ST DISC WHEELS

REPLACING THE FRONT RIM OF CROSSMAX SLR DISC, CROSSMAX SL DISC 07 AND CROSSMAX ST DISC WHEELS 022 TECHNICALMANUAL07 WHEEL BUILDING REPLACING THE FRONT RIM OF CROSSMAX SLR DISC, CROSSMAX SL DISC 07 AND CROSSMAX ST DISC WHEELS 1 spoke wrench M40652 1 spoke wrench for aerodynamic spokes M40567 (for

More information

BackCountry ebikes 2019 MULE Assembly

BackCountry ebikes 2019 MULE Assembly BackCountry ebikes 2019 MULE Assembly Required Tools: Cutting Pliers (to cut box poly strapping and heavy bike banding) Scissors (to remove bubble wrap) Allen wrenches (3mm, 4mm, 5mm, 6mm) Wrenches (10mm,

More information

Item N o.: Item N am e:40cm Boys Rival Bike

Item N o.: Item N am e:40cm Boys Rival Bike Item N o.:42272892 Item N am e:40cm Boys Rival Bike 9 bell 8 grip 30 crash pad 10 brake lever 26 wheel reflector 22 saddle 23 seat post 25 rear reflector 24 quick release 6 handle bar 7 stem 2 top tube

More information

Quattrocycle BV. Quattrocycle. User Manual. Last update February Quattrocycle BV Bremkant EJ Middelbeers. User Manual Quattrocycle 1

Quattrocycle BV. Quattrocycle. User Manual. Last update February Quattrocycle BV Bremkant EJ Middelbeers. User Manual Quattrocycle 1 Quattrocycle User Manual Last update February 2010 Quattrocycle BV Bremkant 6 5091 EJ Middelbeers User Manual Quattrocycle 1 Table of Contents Page Chapter 1: Introduction 3 Chapter 2: Instructions for

More information

FLAT BAR ERGOPOWER 1 - TECHNICAL SPECIFICATIONS 2 - COMPATIBILITY WARNING! COMPATIBILITY

FLAT BAR ERGOPOWER 1 - TECHNICAL SPECIFICATIONS 2 - COMPATIBILITY WARNING! COMPATIBILITY ERGOPOWER FLT R 1 - TECHNICL SPECIFICTIONS 2 - COMPTIILITY WRNING! COMPTIILITY These controls were conceived, sized and created solely for use on roads. They are therefore not suited to other purposes

More information

Service Information. Speed Concept Note about performing mechanical work on bicycles:

Service Information. Speed Concept Note about performing mechanical work on bicycles: Service Information Speed Concept 2011 The Trek Speed Concept bike is the fastest frameset we have ever made. To accomplish this, we have used shaped tubes, hidden front and rear brakes, and very thin-walled

More information

model - CYPRESS DX W

model - CYPRESS DX W Contents model - CYPRESS DX W Maintenenace manual Read and Save these instructions Welcome Contents 1 Preparing Nothing makes us happier than seeing people out riding bikes. For over thirty years Giant

More information

Thank you for purchasing a Porta-Dock product! *Please read and follow these instructions step by step*

Thank you for purchasing a Porta-Dock product! *Please read and follow these instructions step by step* PG 1 OF 9 PORTA-DOCK, INC. 74A ABL/APW 1056 & 44A FLB APW 1056 PORTA-LIFT Thank you for purchasing a Porta-Dock product! *Please read and follow these instructions step by step* STEP 1. Separate and group

More information

DISASSEMBLING & REASSEMBLING CARTRIDGE INSTALLING SEATPOST ON BIKE

DISASSEMBLING & REASSEMBLING CARTRIDGE INSTALLING SEATPOST ON BIKE INTRODUCTION BILL OF MATERIALS SPECIFICATIONS & TOOLS PROCEDURES DISASSEMBLING & REASSEMBLING CARTRIDGE INSTALLING SEATPOST ON BIKE OPERATION OF SEATPOST GIANT LIMITED WARRANTY 1 INTRODUCTION Congratulations

More information

Trilogy Theory of Operation

Trilogy Theory of Operation INSTALLATION & OVERVIEW... 2 Load Height... 2 Approach Angle... 2 Footprint... 3 Protrusion... 3 Mounting the... 4 General Torque Specs... 4 OPERATION OF BIKE RACK... 5 Loading Bikes... 5 Unloading Bikes...

More information

Assembly Tools. Assembly will take about an hour

Assembly Tools. Assembly will take about an hour Assembly Guide Assembly Tools Included in your parts box: Pedals Toolkit (4+5mm combo Allen wrench, 13+15mm combo open-end wrench) Touch-up paint Spare fuses (for battery) Assembly will take about an hour

More information

Installation Guide, MPower Echelon Console

Installation Guide, MPower Echelon Console Installation Guide, MPower Echelon Console AC Performance, AC Sport and AC Performance Plus Schwinn Echelon Console (External Routing) 1. Install batteries to console. Mount the console to the bike. 2.

More information

Helios Separable Tandem Manual

Helios Separable Tandem Manual Helios Separable Tandem Manual This manual accompanies the Helios owners manual Introduction The separable kit fitted to your Helios tandem allows for even greater flexibility in the way you can enjoy

More information

Good Day. This is the manual of your new Cruzer, inside you should find various items, this guide is going to help you set up your bike properly.

Good Day. This is the manual of your new Cruzer, inside you should find various items, this guide is going to help you set up your bike properly. Good Day This is the manual of your new Cruzer, inside you should find various items, this guide is going to help you set up your bike properly. 0 You will find all the tools you need inside the Rayvoltbike

More information

ASSEMBLY GUIDE: Izip & Ezip Electric Bicycles with Rack-Top Mounted Batteries ( RTMB Bicycles )

ASSEMBLY GUIDE: Izip & Ezip Electric Bicycles with Rack-Top Mounted Batteries ( RTMB Bicycles ) ASSEMBLY GUIDE: Izip & Ezip Electric Bicycles with Rack-Top Mounted Batteries ( RTMB Bicycles ) Please Refer to your Owner s Manual for Detailed Setup Instructions Technical & Customer Service: 1-800-377-4532

More information

Troubleshooting Guide

Troubleshooting Guide Troubleshooting Guide This troubleshooting guide outlines quick fixes to the most common technical questions about the ElliptiGO. If the problem persists or you feel uncomfortable performing these actions,

More information

2016 Road Electronic Frame Fit Specifications This document is intended to communicate general frame fit guidelines for SRAM electronic products.

2016 Road Electronic Frame Fit Specifications This document is intended to communicate general frame fit guidelines for SRAM electronic products. 206 Road Electronic Frame Fit Specifications This document is intended to communicate general frame fit guidelines for SRAM electronic products. For additional information, please contact your SRAM representative.

More information

Drive Belt Instructions

Drive Belt Instructions Drive Belt Safety Do not roll, pry, twist, invert or bend the belt back on itself. Do not zip tie the belt. The acceptable temperature range for your belt drive is -53 C to 85 C. Do not lubricate the belt

More information

VR SERIES TECHNICAL MANUAL

VR SERIES TECHNICAL MANUAL VR SERIES TECHNICAL MANUAL INTRODUCTION CONTENTS VR SERIES Congratulations on purchasing a VR Series. As with all of our bikes and components, our aim is to provide the rider with the best product and

More information