FMAC Sine FMAC Sine DCL
|
|
- Amy Shepherd
- 5 years ago
- Views:
Transcription
1 emc Sine Output Filter FMAC Sine FMAC Sine DCL
2 -Phase Filters Sine wave output filter Description - Design corresponding to UL 128, CSA 22.2 No. 8, IEC/EN699 - Standard versions include insulated safety screw terminals - Enhancement of the system efficiency Applications - Optimized for long motor cables (up to 2 m) and operation under full load - Frequency converters in uninterruptible power supplies, elevators, heating-, ventilating- and air conditioning-systems, traction and conveyer systems References Product Information: Weblinks Approvals: RoHS: CHINA-RoHS: Stock-Check: Technical Data Rated Current 4-16 Ta 4 C Rated voltage 5/288 VAC; 5/6 Hz Approval for 4-16 Ta C / 5/288 VAC; 5 Hz Overload Current 1.5 x Ir for 1 minute, per hour Dielectric Strength for 48 VAC 2.5 kvdc between L-L 1.1 kvdc between L-PE Test voltage (2 sec) Weight 9-22 kg Material: Housing Metal Sealing Compound UL 94V-2 Mounting Screw-on mounting on chassis, from top Terminal Screw Clamp Operating Temperature [ C] -25 C to 1 C Climatic Category 25/1/21 acc. to IEC Degree of Protection IP 2 acc. to IEC 6529 Protection Class Suitable for appliances with protection class 1 acc. to IEC 6114
3 FMAC SINE Dimensions Case 2K max. 5 (27) max. 9 (24) (2) (19) (1) ±. max. 15 (19.5) 44±. 4mm 2 ;.5-,6 Nm 1) Inverter 2) Motor Case 2L max. 5 (27) max. 9 (24) (2) (19) (1) ±. max. 18 (19.5) 44±. 4mm 2 ;.5-,6 Nm 1) Inverter 2) Motor
4 -Phase Filters Case 2M max. 5 (27) max. 9 (24) (2) (19) (1) ±. max. 215 (174.5) 4mm 2 ;.5-,6 Nm 44±. 1) Inverter 2) Motor Case 2N max. 295 (26) max. 145 (2) () () ±. max. 19 (149.5) 1mm 2 ; 1.5-1,8 Nm 15 ±. 1) Inverter 2) Motor
5 FMAC SINE Diagrams F1 F2 F A) B) M A) B) U U ) L1 L2 L PE I I 1) Inverter 2) Sine wave output filter ) Motor Variants Rated Current Rated voltage Switching frequency Motor frequency Rated motor power Motor cable lenght DC resistance Total power loss Weight Housing Order Number [A] [VAC] [khz] [khz] [kw] [m] [mω] [W] [kg] 4 5/ m K FMAC-S2K-462-A 8 5/ m L FMAC-S2L-862-A 12 5/ m M FMAC-S2M-1262-A 16 5/ m N FMAC-S2N-1662-A Packaging unit 1 Pcs > Sine Wave Output Filters to Increase Motor Service Life The SCHURTER Sine Wave Filters series FMAC SINE and FMAC SINE DCL are designed to convert output voltage wave forms produced by PWM frequency converters into low distortion sine wave forms for motor drive and power transformation applications. Sine Wave Filters are suited to a wide variety of applications including frequency converters in uninterruptible power supplies, elevators, heating-, ventilating- and air conditioning systems, traction and conveyer systems. The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments.
6 -Phase Filters Sine wave output filter with a voltage dc link Description - Design corresponding to UL 128, CSA 22.2 No. 8, IEC/EN699 - Enhancement of the system efficiency Technical Data Rated Current 4-16 Ta 4 C Rated voltage 5/288 VAC; 5/6 Hz Approval for 4-16 Ta C / 5/288 VAC; 5 Hz Overload Current 1.5 x Ir for 1 minute, per hour Dielectric Strength for 48 VAC 2.5 kvdc between L-L 1.1 kvdc between L-PE Test voltage (2 sec) Weight kg Material: Housing Metal Sealing Compound UL 94V-2 Applications - Optimized for long motor cables (up to 1 m) and operation under full load - Equipped with voltage connection to converter dc link circuit for best results - Frequency converters in uninterruptible power supplies, elevators, heating-, ventilating- and air conditioning-systems, traction and conveyer systems - Cost saving technologie, increase of motor life time, deployment of flexible lightweight unshielded instead of expensive shielded motor cables, reduced fitting work References Product Information: Weblinks Approvals: RoHS: CHINA-RoHS: Stock-Check: Mounting Screw-on mounting on chassis, from top Terminal Screw Clamp Operating Temperature [ C] -25 C to 1 C Climatic Category 25/1/21 acc. to IEC Degree of Protection IP 2 acc. to IEC 6529 Protection Class Suitable for appliances with protection class 1 acc. to IEC 6114
7 FMAC SINE DCL Dimensions Case 2G max. 5 max. 9 (19) (2) (28) 7±1 4 7±5 2±5 (19.5) 1±5 ) max. 15 (112) max. 9 5) (11) 4) 1.5 mm M4x16; Nm 8) 6.5 ±. 6) 4mm 2 ;.5-,6 Nm 44 ±. 7) (x) 1.5 mm 2 1) Inverter 2) Motor ) Shield 4) Shielded cable 5) Endsleeves 6) Ground 7) Shieldes cable 8) Operation Mode Case IB max. 5 max. 9 (19) (2) (28) 7±1 4 7±5 2±5 1±5 (19.5) ) max. 18 (142) max. 9 5) (11) 4) 1.5 mm M4x16; Nm 8) 8.6 ±. 6) 4mm 2 ;.5-,6 Nm 44 ±. 7) (x) 1.5 mm 2 1) Inverter 2) Motor ) Shield 4) Shielded cable 5) Endsleeves 6) Ground 7) Shieldes cable 8) Operation Mode
8 -Phase Filters Case 2H max. 5 max. 9 (19) (2) (28) 7±1 4 7±5 2±5 1±5 (174.5) ) max. 215 (177) max. 9 5) (11) 4) 1.5 mm M4x16; Nm 8) 8.7 ±. 6) 4mm 2 ;.5-,6 Nm 44 ±. 7) (x) 1.5 mm 2 1) Inverter 2) Motor ) Shield 4) Shielded cable 5) Endsleeves 6) Ground 7) Shieldes cable 8) Operation Mode Case 2I max. 1 max. 14 (8) (2) (45) 7± ±5 2±5 (15) 1±5 (18) ) max. 2 (18) max ) (11) 4) 2.5 mm 2 M4x16; Nm 8) 8.7 ±. 6) 1mm 2 ; Nm 95 ±. 7) (x) 2.5 mm 2 1) Inverter 2) Motor ) Shield 4) Shielded cable 5) Endsleeves 6) Ground 7) Shieldes cable 8) Operation Mode
9 FMAC SINE DCL Diagrams F1 F2 F 1) A) B) M A) B) U U 2) ) 4) 5) L1 L2 L PE I I Note:The inverter switching frequency must lie within the range from 2 to 2kHz. A switching frequency below or above the mentioned range will result in poor performances. Sine wave output filters with dc-link produce leakage currents. These leakage currents could, in combination with certain OEM inverter types, disturb overall system performance, causing a "over current or short to earth" error message on the inverter. For such cases Schurter suggests the following three solutions or a combination of each:1) Increasing the switching frequency of the inverter (drawback: increased power loss in the inverter) 2) Activating the low leakage sine wave output filter operation mode by removing the factory set detachable screw (drawback: light increase of the leakage current in the motor) ) Connecting a ground wire choke type DEH in the inverters earth connection (drawback: additional component) 1) Inverter 2) Ground choke ) DC-Link 4) Sine wave output filter 5) Motor Variants Rated Current Rated voltage Switching frequency Motor frequency Rated motor power Motor cable lenght DC resistance Total power loss Weight Housing Order Number [A] [VAC] [khz] [khz] [kw] [m] [mω] [W] [kg] 8 5/ <= IB FMAC-SIB / <= G FMAC-S2G / <= H FMAC-S2H / <= I FMAC-S2I-1662 Packaging unit 1 Pcs > Best Products Worldwide "Both, now and in the future, our customers are guaranteed the best products world-wide; products which perfectly correspond to their individual needs. SCHURTER is permanently committed to the excellent quality of its products and business practices which are ecologically sound." Hans-Rudolf Schurter, Schurter Holding AG The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments.
10 & Services > EMC Services Applying the optimal EMC solution by eliminating interference in electrical systems and equipment. Our Range of Services Feel free to put our EMC competence to the test. We will perform EMC measurements in order to recommend the changes needed to eliminate interference in your appliance. We will build specific samples and provide you with your individual EMC solution. We will oversee your product s life cycle from R&D to mass production. Partnership Success is our permanent incentive. We are used to being innovative to meet challenges in diverse markets. Our experience has shown that the main savings potential in terms of EMC-compliant appliance cost lies in the materials used. Through ingenious filter design, we will achieve optimal performance at a minimal price. The standard products listed below are specially designed to eliminate interference in electrical equipment. - Power entry modules with filter - Single phase line filters - -phase line filters - Chokes EMC products: New products: Approvals Our products carry all country-specific certification labels such as: UL, CSA, VDE (ENEC1), CCC, Approvals overview: SCHURTER offers a variety of products ensuring clean and safe supply of power and ease of use. Project Competence At SCHURTER, more than 5 engineers are dedicated to developing our products and manufacturing systems, using the latest in design and testing tools and systems.
11 Mass Production SCHURTER guarantees consistently high quality and absolute reliability in each and every one of its products. Our state-of-the-art manufacturing facilities as well as our up-to-date know-how make sure we can fulfill our motto: Clean & Safe Power Ease of Use. Our expertise encompasses injection molding, metalworking, electroplating, assembly with automated manufacturing systems, casing system design and manufacturing, PCB assembly as well as EMC product assembly. Competence: Measurement Competence SCHURTER will perform all necessary preliminary tests concerning immunity and interference in your electrical systems or equipment. Our EMC competence center is equipped with all the measurement tools necessary and an EMC chamber for measuring line-bound interference. Measurements on Site Upon request we will conduct testing to eliminate interference in electrical equipment using our mobile measurement tools directly on site. SCHURTER offers a mobile measurement service equipped with all necessary tools for line-bound measurements (IEC und IEC ), allowing various systems or equipment conformity tests to be performed directly at the manufacturer s or user s site. EMC service: Measurement Report for CE Conformity The measurement results will be compiled in an EMC measurement report. This report will serve as proof of CE conformity for line-bound interference. Household, Lighting and Telecom Residential, commercial and light industrial Emission IEC (EN 581-1) EN 5514 Household Applications and tools EN 5522 ITE (Information technology equipment) Harmonics (IEC 61--2) Voltage fluctuations (IEC 61--) Immunity IEC (EN 582-1) IEC ESD IEC HF field IEC Burst IEC Surge IEC Voltage variations Industrial Applications (ISM) Industrial, scientific and medical, high-frequency appliances Emission IEC (EN 581-2) EN 5511 Harmonics (IEC 61--2) Voltage fluctuations (IEC 61--) Immunity IEC (EN 582-2) IEC ESD IEC HF field (casing) IEC HF field (lines) IEC Burst IEC Surge IEC NF magnetic field (only for appliances sensitive to magnetic fields) Sample Service Individual interference problems require the development of special filter solutions. In cooperation with customers, SCHURTER will prepare samples including documentation within an 8 business day turnaround time. Contact Please don t hesitate to contact us, should you need further information. We will gladly make your problems our challenges. SCHURTER endeavors to provide you with the most optimal EMC solution. Contact: SCHURTER AG Arjan van der Marel Product Manager EMC Phone: arjan.vandermarel@schurter.ch
12 COMPONENTS Switzerland SCHURTER AG phone: contact@schurter.ch Brazil SCHURTER + OKW do Brasil Componentes Eletronicos Ltda. Tel.: info@sob-brasil.com China SCHURTER Electronics Shenzhen Ltd. phone: info@schurter.com.cn CHI LICK-SCHURTER Ltd. Hong Kong SAR phone: fuse@chilickschurter.com Czech Republic SCHURTER spol. s.r.o. phone: firma@schurter.cz Germany SCHURTER GmbH phone: info@schurter.de France SCHURTER SA phone: contact@schurter.fr India SCHURTER Electronics (India) Pvt. Ltd. phone: /4 info@schurter.co.in Italy KEVIN-SCHURTER S.p.a phone: info@kevin.it Japan SCHURTER K. K. phone: info@schurter.co.jp Singapore SCHURTER (S) Pte. Ltd. (APAC HQs) phone: info@schurter.com.sg Slovakia SCHURTER (SK) s.r.o. phone: Sweden SCHURTER Nordic AB phone: info@schurter.se UK SCHURTER Ltd. phone: sales@schurter.co.uk USA SCHURTER Inc. phone: info@schurterinc.com INPUT SYSTEMS Germany SCHURTER GmbH phone: info@schurter.de Switzerland SCHURTER Input Systems AG phone: info@meierhofer.ch EMS ELECTRONIC MANUFACTURING SERVICES Romania INTERELEKTRONIC SRL phone: info@interelektronic.ro Switzerland TICOMEL SA phone: contact@ticomel.ch fuses connectors circuit breakers input systems emc products /.1 / UD
Efficient EMC Solutions
www.schurter.com/emc EMC Products & Services Efficient EMC Solutions > EMC-Competence 02 03 www.schurter.com SCHURTER has the capabilities and expertise to ensure electromagnetic compliance (EMC), in order
More informationPower Quality Increased Reliability. Components
Increased Reliability Components schaffner Group Schaffner quoted on the Swiss stock exchange since 1998 is the international leader in electromagnetic compatibility (EMC) and power quality, focusing on
More informationVLT 2000 Series. How to size your VLT
Selection of frequency converter Usually the size of frequency converter is chosen on the basis of the shaft output, as this may be the only value known. However, if the data are known for both the application,
More informationHigh-performance submersible pressure transmitter For level measurement Model LH-10
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-10 WIKA data sheet PE 81.09 Applications Level measurement in rivers and lakes Deep well
More informationPrewired position switches FA series
2 Prewired position switches FA series Selection diagram 01 08 10 11 1 15 1 02 external rubber gasket external rubber gasket 1 51 52 54 55 56 5 ACTUATORS adjustable lever safety adjustable lever 41 45
More informationGas density monitor With integrated transmitter Model GDM-100-TI
SF 6 gas solutions Gas density monitor With integrated transmitter Model GDM-100-TI grid Products WIKA data sheet SP 60.05 for further approvals see page 5 Applications Gas density monitoring of closed
More informationPosition switches FP series
A Position switches FP series Selection diagram 0 08 8 9 0 0 0 Ø 8 mm Ø, mm external rubber stainless steel stainless steel fiber glass rod gasket sphere sphere adjustable lever safety adjustable lever
More informationHigh-performance submersible pressure transmitter For level measurement Model LH-10
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-10 WIKA data sheet PE 81.09 Applications Level measurement in rivers and lakes Deep well
More informationTeSys protection components
Presentation, description -pole thermal overload relays TeSys D Presentation TeSys D thermal overload relays are designed to protect a.c. circuits and motors against: b overloads, b phase failure, b excessively
More informationWAGO-I/O-SYSTEM 750 XTR Taking it to the extreme The Standard for 750 XTR
WAGO-I/O-SYSTEM 750 XTR Taking it to the extreme The Standard for 750 XTR TAKING IT TO THE extreme The Standard for 750 XTR extreme temperatures extreme isolation extreme vibrations from 40 C to +70 C
More informationWatts. xppower.com. Input. General. Environmental. Output. EMC & Safety. Output Voltages from 2.5 V to 48 V. Non-standard Outputs Available
-0 Watts AEH Series s from. V to 8 V xppower.com Non-standard s Available Universal Input Single & Multiple Versions 0 C to +60 C Operating Temperature Efficiency up to 80% Non-standard Connectors Available
More informationPressure Measurement Single-range transmitters for general applications
Siemens A 207 Overview Application The SITRANS P Compact pressure transmitter is designed for the special requirements of the food, pharmaceutical and biotechnology industries. The use of high-grade materials
More informationApplications. What moves your world
Digital Control Proportional Valves Series D92 High-performance pressure control valve with high dynamics and the ability to easily and exactly tune the pressure controller gain The pq-proportional valves
More informationbetter measurement Simply a question of SCHMIDT Flow Sensor SS The cost-effective alternative in pressurised systems up to 10 bars.
Simply a question of better measurement SCHMIDT Flow Sensor SS 20.261 The cost-effective alternative in pressurised systems up to 10 bars. Compressed air technology Industrial processes A cost analysis
More information2-Phase Filters(Direct IEC Connector) RoHS. 250V AC 50/60Hz 1,2,3,6,10A KC, UL, CSA, VDE+ENEC, TÜV, CQC, 25 / 85 / 21
2-Phase Filters(Direct IEC Connector) IG IM IL IX ID Rated Voltage/ Frequency 1,2,3,6,10A KC, UL, CSA, VDE+ENEC, TÜV, CQC, Climatic Category IG, IX, ID : IM, IL : Plastic Case IG, IX, ID : Screw and PCB
More informationDifferenz-Drucktransmitter Differential pressure transmitter Transmetteur de pression différentielle bar
692 Differenz-Drucktransmitter Differential pressure transmitter Transmetteur de pression différentielle 0 0.1 25 bar E Technical overview The differential pressure transmitter of type series 692 with
More informationX2 Metallized Polypropylene Film Capacitor JFV
FEATURES: Non-inductive, (UL940V-0) plastic case sealed with epoxy resin. Provides interference suppression with VDE, ENEC and UL approvals. SPECIFICATIONS: Operating Temperature -40 ~ +110 Voltage Rating
More informationConsumer Products Services Germany GmbH Türkheim Germany
Report reference number... : TEST REPORT Nota de interpretación técnica de la equivalencia de la separación galvanica de la conexión de instalaciones Generadoras en baja tension Sobre conexión de instalaciones
More informationGuidelines to the standard IEC60601
EUROPEAN POWER SUPPLY MANUFACTURERS ASSOCIATION (Visit the EPSMA website at www.epsma.org) Medical Approvals for Power Supplies Guidelines to the standard IEC60601 Revision Date: 2009-09-12 This document
More informationAMS 2710 PCB pressure sensor module with V output
FEATURES Universal pressure sensor module with 0.. 10 V voltage output Fully calibrated and temperature compensated sensor module Variants for (bidirectional) differential, gage, absolute and barometric
More informationDMK 458. Pressure Transmitter for Marine and Offshore. Ceramic Sensor. accuracy according to IEC 60770: standard: 0.25 % FSO option: 0.
Pressure Transmitter for Marine and Offshore Ceramic Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0. % FSO Nominal pressure from 0... 40 mbar up to 0... 0 bar Output signals -wire:
More informationHigh-performance submersible pressure transmitter For level measurement in hazardous areas Model LH-20
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement in hazardous areas Model LH-20 WIKA data sheet PE 81.56 Applications Deep well and borehole measurements
More informationTABLE OF CONTENTS 2 TALAS DRYER 4 TALAS MEASURER 7 TALAS PORTABLE DRYER 9 TALAS LEAKER 11 TALAS STARTER 14 TALAS AUXILIARY 17 APPENDICES
TABLE OF CONTENTS 2 TALAS DRYER 4 TALAS MEASURER 7 TALAS PORTABLE DRYER 9 TALAS LEAKER 11 TALAS STARTER 14 TALAS AUXILIARY 17 APPENDICES ALL PICTURES SHOWN ARE FOR REFERENCE ONLY ACTUAL PRODUCT MAY VARY
More informationSolenoid gas valve. The solenoid gas valve is also applicable as a main gas valve Pilot gas valve for forced draft burners
7 634 VGS1... with AGA67 connector VGS2... with AGA67 connector Solenoid gas valve VGS The solenoid gas valve is also applicable as a main gas valve Pilot gas valve for forced draft burners The VGS and
More informationHigh-performance submersible pressure transmitter For level measurement Model LH-20
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-20 WIKA data sheet PE 81.56 Applications Deep well and borehole measurements Groundwater
More informationDifferential pressure controls, Type MP 54, 55 and 55A
MAKING MODERN LIVING POSSIBLE Technical brochure Differential pressure controls, Type MP 54, 55 and 55A MP 54 and oil pressure controls are used as safety switches to protect refrigeration compressors
More informationRelative pressure transmitter type 520
Relative pressure transmitter type 520 Pressure range -1... 9 bar / 0... 2.5 1000 bar The compact type 520 pressure transmitter is based upon the Huba Control developed thick film technology where the
More informationHigh-performance submersible pressure transmitter For level measurement Model LH-20
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-20 WIKA data sheet PE 81.56 Applications Deep well and borehole measurements Groundwater
More informationSENSORS Pressure CALDARO
SENSORS Standards Specials THE MMI & MMF SPECIALIST The Caldaro Way From the very beginning Caldaro has managed to establish itself as a highly reputable OEM supplier of tailored controller and sensor
More informationLimit switches OsiSense XC Special For material handling applications, type XC1 AC
Presentation For material handling applications, type XC C b XC C with slow break contacts v With head for linear movement () 00_ 00_ 000_ Page / 00_ 00_ XCC XCC Page / XCC XCC / General characteristics
More informationSITRANS P measuring instruments for pressure
SITRANS P measuring instruments for pressure Z series for gage pressure Siemens AG 008 Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and
More informationCertificate of compliance
Bureau Veritas Consumer Products Services Germany GmbH Businesspark A96 86842 Türkheim Germany + 49 (0) 40 740 41 0 cps-tuerkheim@de.bureauveritas.com Certification body of BV CPS GmbH Accredited according
More informationX2 Metallized Polypropylene Film Capacitor JFV
FEATURES: Non-inductive, (UL940V-0) plastic case sealed with epoxy resin. Provides interference suppression with VDE, ENEC and UL approvals. SPECIFICATIONS: Operating Temperature -40 ~ +110 Maximum Continuous
More informationPIKO IQ 4.2, Plenticore plus 4.2 Rating: 10,0kW 8,5kW 7,0kW 5,5kW 4,2kW Rated voltage: PIKO IQ 8.5, Plenticore plus 8.5
Applicant: Product: Certificate of conformity Generating unit, NS-protection KOSTAL Solar Electric GmbH Hanferstraße 6 79108 Freiburg i. Br. Germany Photovoltaic Inverter with integrated NS-protection
More informationUL TEST REPORT AND PROCEDURE
Issue Date: 2015-01-30 Page 1 of 24 Report Reference # E186249-A270-UL UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: Product: Model: Rating: UL 60950-1, 2nd Edition, 2014-10-14 (Information
More informationLTB013EN. Operating Instruction Trimod Besta Level Switch types XA 5, XB 5 for use in potentially explosive atmospheres acc.
LTB013EN Operating Instruction Trimod Besta Level Switch types XA 5, XB 5 for use in potentially explosive atmospheres acc. to IECEx scheme Subject to technical modification Bachofen AG Ackerstrasse 42
More informationMeta-MEC Manual Motor Starters
www.lsis.biz Meta-MEC Manual Motor Starters LS Meta-MEC Manual Motor Starters provide completed ranges up to 100A 45 mm 55 mm 32AF 2 45 mm 70 mm 63AF 100AF 3 LS Meta-MEC Manual Motor Starters deliver more
More informationDifferential Pressure Control Types MP 54, MP 55 and MP 55A
MAKING MODERN LIVING POSSIBLE Data sheet Differential Pressure Control Types MP 54, MP 55 and MP 55A MP 54 and MP 55 oil differential pressure controls are used as safety switches to protect refrigeration
More informationReferences 6 k thermal overload relays, adjustable from 0.11 to 16 A
s 6 k thermal overload relays, adjustable from 0.11 to 16 A 3-pole relays with screw clamp terminals These overload relays are designed for the protection of motors. They are compensated and phase failure
More informationPrewired position switches FA series
Prewired position switches Technical data Housing Made of metal, coated with baked epoxy powder 2 m wired cable with 5x0,5 mm 2 wires marked SEV and IMQ Protection degree: IP6 General data Ambient temperature:
More informationE2K-L. Liquid Level Sensor That Is Unaffected by the Color of the Pipe or Liquid. Liquid Level Sensor. Ordering Information
Liquid Level EK-L CSM_EK-L_DS_E 3 Liquid Level That Is Unaffected by the Color of the or Liquid Mount to bypass pipes. Fit a wide range of pipe diameters: 8 to mm or to mm Built-in Amplifiers to save space.
More informationEX-RECESSED CEILING LIGHT FITTINGS
EX-RECESSED CEILING LIGHT FITTINGS RLF/RLF-INOX 250 18-58 W / RLF/RLF-INOX 250... N 18-36 W Metallic design for Zone 1 and Zone 21 The RLF... explosion-protected recessed ceiling light fittings with electronic
More informationQuick Reference Guide Power Series Switches
Quick Reference Guide The Power Series employs a Quick-make/Quick-break wiping action contact mechanism. This highspeed movement reduces the teasing of the contact surfaces reducing pitting due to arcing.
More informationP9000 DESCRIPTION. For parts requiring RoHS compliance, please contact factory. P February /6
P9000 High accuracy through digital compensation High thermal stability Rugged stainless steel construction Ideal for test stands High burst pressure limit DESCRIPTION The P9000 Series is a range of advanced,
More informationMeta-MEC Manual Motor Starters
Leader in Electrics & Automation Meta-MEC Manual Motor Starters Electric Equipment LG Meta-MEC Manual Motor Starters provide completed ranges up to 100A 45 mm 55 mm 32AF 2 45 mm 70 mm 63AF 100AF 3 LG Meta-MEC
More informationJunction Boxes Series 8118
> Enclosure in glass fibre reinforced polyester resin > 3 different sizes available with 4, 5 or as a junction box with integrated miniature fuse: 3 terminals and 1 miniature fuse 7 terminals and 1 miniature
More informationPressure switches for air and water CS
Data sheet Pressure switches for air and water CS CS pressure switches have a built-in pressure operated, three-pole switch. The contact position of which depends on the pressure in the connector and the
More information2 Overview. SITRANS P measuring instruments for pressure. Transmitters for gage and absolute pressure. Z series for gage pressure
Z series for gage pressure Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and electronics plate Process connection Electrical connection
More information1 Overview. Pressure Measurement Single-range transmitters for general applications. 1/22 Siemens FI
Siemens AG 06 SITRANS LH00 Transmitter for hydrostatic level Overview Function U const. p U I EM The pressure transmitter SITRANS LH00 is a submersible sensor for hydrostatic level measurement. The pressure
More informationHigh-performance submersible pressure transmitter For level measurement Model LH-20
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-20 WIKA data sheet PE 81.56 Applications Deep well and borehole measurements Groundwater
More informationSupplementary Operator s Manual 42/24-14 EN Rev. 3
Advance Optima Continuous Gas Analyzers AO2000 Series with Uras26, Magnos206, Caldos25, Caldos27 Designed per Category 3G for Measurement of Flammable Gases ( Safety Concept ) and Non-flammable Gases Supplementary
More informationSingle and double acting, magnetic, self-centering Bores: ø 16, 20, 25, 32, 40 mm
> Series CGPT self-centering parallel grippers with T-guide Series CGPT self-centering parallel grippers with T-guide Single and double acting, magnetic, self-centering Bores: ø 6, 20, 25, 32, 40 mm New
More informationDifferential pressure switch MP 54, MP 55 and MP 55A
Data sheet Differential pressure switch MP 54, MP 55 and MP 55A MP 54 and MP 55 oil differential pressure switches are used as safety switches to protect refrigeration compressors against low lubricating
More informationInput Systems. schurter.com/input-systems. Touchscreen Lösungen solutions Kapazitive Capacitive Schaltelemente Folientastaturen.
schurter.com/input-systems Integrierte Integrated Lösungen solutions Touchscreen Lösungen solutions Kapazitive Capacitive Schaltelemente switch solutions Folientastaturen Membrane switches Gehäuse Housing
More informationOperating instructions Safety Rope Emergency Stop Switches ZB0052 / ZB0053 ZB0072 / ZB0073
Operating instructions Safety Rope Emergency Stop Switches UK ZB0052 / ZB0053 ZB0072 / ZB0073 7390878 / 02 03 / 2011 Contents 1 Safety instructions...3 2 Installation / set-up...4 2.1 Applications...4
More informationibridge and ibridge Ultra
2.00 mm Board to Cable Connectors ED. 06 10.2016 Catalog EA IB001 erni.com erni.cn TABLE OF CONTENTS OVERVIEW General 03 Technical Details 04 Features 05 Electrical and Mechanical Characteristics 10 Ordering
More informationO.K. Safety first. Table of Contents. Approvals. Attention IFGC CSA UL ANSI NFPA CDN USA
HPSV 10020/604 High Pressure Safety Shutoff Valve Installation Instructions USA CDN Table of Contents Table of Contents...Page 1 Approvals...Page 1 Attention...Page 1 Specification...Page 2 Installation
More informationJUMO dtrans p30 Pressure Transmitter
609 Fulda, Germany Postal address: 605 Fulda, Germany Phone: +49 661 600-0 Fax: +49 661 600-607 Phone: +44 179 6 55 Data Sheet 40466 Page 1/6 JUMO dtrans p0 Pressure Transmitter General application Pressure
More informationThe Limit Switch with Better Seal, Shock Resistance, and Strength. General-purpose Limit Switch. Model Number Structure
General-purpose Limit Switch CSM_DA-_N_DS_E The Limit Switch with Better Seal, Shock Resistance, and Strength A double seal on the head, a complete gasket cover, and other features ensure a better seal
More informationOPTIBAR P 1010 C Technical Datasheet
Technical Datasheet Pressure transmitter with recessed diaphragm for general applications Wide variety thanks to modular design Measuring ranges up to 250 bar / 3750 psi High overload and temperature stability
More informationInstallation and Operation Manual
Manual Static pressure transducer with controller Differential static pressure transducer with analog output and optional PI control mode Large diaphragm element with differential transformer Transducer
More information1 Overview. Pressure Measurement Transmitters for basic requirements. 1/16 Siemens FI SITRANS P220 for gauge pressure
Siemens AG 204 Overview The pressure transmitter SITRANS P220 measures the gauge pressure of liquids, gases and vapors. Stainless steel measuring cell, fully welded Measuring ranges 2.5 to 600 bar (36.3
More informationMonitoring device NTS 30
P R O D U C T I N F O R M A T I O N Electronic level- and temperature monitoring device Monitoring device NTS 30 Contents Description Description... 2 Operating... 3 Design and electrical data... 4 Circuit
More informationHyDefinition HD4070. Plasma Arc Cutting / Marking System. Product Configuration Manual Revision
HyDefinition HD4070 Plasma Arc Cutting / Marking System Product Configuration Manual 803770 Revision 1 4070.97 HD4070 Product Configuration Manual (P/N 803770) Revision 1 December, 2002 Hypertherm, Inc.
More informationTERMINAL BLOCK SUMMARY
TERMINAL BLOCK SUMMARY TERMINAL BLOCK SUMMARY TERMINAL BLOCK SUMMARY FEEDTHROUGH TERMINALS FUSE TERMINALS DISCONNECT TERMINALS MICRO TERMINALS CIRCUIT BREAKERS PRODUCT INFORMATION Feedthrough Terminals
More informationMiniature controls. Contactors. Overload relays. Starters. Control relays
Contactors Overload relays Starters Control relays Description General features Wiring terminations available include plugon connectors, wire pins for PC board mounting and solder connections Low power
More informationEPRB-2 Pressure Transducer
Small size with amplified output Any liquid or gas media compatible with stainless steel Operating temperature up to 150 C (300 F) Variety of pressure ports Available as gage and absolute CE approved DESCRIPTION
More informationMounting instructions. Strain transducer SLB-700A. B 26.SLB700A.10 e
Mounting instructions Strain transducer SLB-700A B 26.SLB700A.10 e SLB700A 3 Contents Page Safety instructions.............................................. 4 1 Applications..................................................
More informationPrecision pressure sensor Basic version Model CPT6020
Calibration Precision pressure sensor Basic version Model CPT6020 WIKA data sheet CT 25.13 Applications Calibration technology High-accuracy pressure monitoring Pressure sensing in critical applications
More information* * Data Sheet and Operating Manual. Digital manometer ME01 ## # 87 # HL S#### Dust explosion protection Zone 22.
*09005087* DB_BA_EN_ME01_S Rev.A 12/16 *09005087* d e v e l o p i n g s o l u t i o n s Data Sheet and Operating Manual ME01 Digital manometer Table of Contents ME01 ## # 87 # HL S#### Dust explosion protection
More informationProportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
More informationOTL Universal terminals
OTL Universal terminals 2019 Universal terminals OTL Universal terminals OTL 1000 V AC/DC Bimetal (AL/CU) Class A Certified according to standards EN 612381 and EN 6094771 2 Universal terminals OTL Universal
More informationTURQUOISE SWITCHES ABJ (BJ) SWITCHES
Ultra-miniature Size Sealed Switches TURQUOISE SWITCHES ABJ (BJ) SWITCHES Terminal type Mounting hole 2.3 mm type FEATURES Ultra-miniature size, High sealing performance sealed switches Elastomer double
More informationElectropneumatic Positioner and Pneumatic Positioner Type 3760 JIS
Electropneumatic Positioner and Pneumatic Positioner Type 3760 Application Single-acting positioners for direct attachment to pneumatic control valves. Supplied with an electric input signal of 4 to 20
More informationXMPA12B2142 pressure sensor XMP - 12 bar - G 1/4 female - 2 NC - without control type
Characteristics pressure sensor XMP - 12 bar - G 1/4 female - 2 NC - without control type Main Range of product Pressure sensor type Pressure sensor name Pressure sensor size OsiSense XM Electromechanical
More informationElectropneumatic Positioner and Pneumatic Positioner Type 3760 JIS
Electropneumatic Positioner and Pneumatic Positioner Type 3760 Application Single-acting positioners for direct attachment to pneumatic control valves. An electric standardized signal of 4 to 20 ma or
More informationTolerance code. Lead space
FEATURES Non-inductive construction. Self-healing. Flame-retardant plastic case and epoxy resin (compliance with UL 94V-0). High moisture-resistance. Good solderability (plated with 100% Matte Sn). APPLICATIONS
More information1 Overview. Pressure Measurement Single-range transmitters for general applications. 1/16 Siemens FI US Edition
Siemens AG 206 Overview Design Device structure without explosion protection The pressure transmitter consists of a piezoresistive measuring cell with a diaphragm installed in a stainless steel enclosure.
More informationCircuit breakers PR 60
Circuit breakers PR series are mechanical switching devices able to switch, conduct and switch-off the current under normal conditions and able to switch, conduct and automatically switch-off the current
More informationInstallation, use and maintenance instructions. Gas burner (5)
Installation, use and maintenance instructions Gas burner MODEL GAS 4 TYPE 516 T80 291 (5) TECHNICAL FEATURES Thermal output 180-470 kw 154.800-404.200 kcal/h Fuel Natural gas Pci 8-10 kwh/m 3 = 7000-8600
More informationx act i Precision- Pressure Transmitter for Food Industry, Pharmacy and Biotechnology Stainless Steel Sensor
Precision- Pressure Transmitter for Food ndustry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to EC 60770: 0. % FSO Nominal pressure from 0... 400 mbar up to 0... 40 bar Output
More information2/2- and 3/2-way Rocker Solenoid Valve - bistable (impulse) version
2/2- and 3/2-way Rocker Solenoid Valve - bistable (impulse) version Type 6624 Impulse can be combined with... 10mm width orifice DN 0.8 to 1.2 with pressure range vacuum to 5bar medium separation, for
More informationPressure Measurement Single-range transmitters for general applications
Siemens AG 206 Overview Design Device structure without explosion protection The pressure transmitter consists of a piezoresistive measuring cell with a diaphragm installed in a stainless steel enclosure.
More informationSPECIFICATION FOR APPROVAL
RoHS Compliant SPECIFICATION FOR APPROVAL File No.: Q/FRK 0.GS.E.-F03 Product Name Product Type Safety class S3(P2) Metallized polypropylene film AC motor capacitor(box-type) [CBB61-S3(P2)] Product Code
More informationx act i Precision Pressure Transmitter for Food Industry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to IEC 60770: 0.
Precision Pressure Transmitter for Food ndustry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to EC 60770: 0. % FSO Nominal pressure from 0... 400 mbar up to 0... 40 bar Output
More informationRoHS. WS Series Snap Action Switch. Specifications. Part Number Configurator
Applications / Markets HVAC Electrical Housewares Floor Care Appliances Specifications White Goods Vending Machines Features & Benefits Medical Equipment RoHS Contact Rating: 0.5A @ 42VDC 1A @ 24VDC 2A
More informationRelative pressure switch type 521
Relative pressure switch type 521 Pressure range 0... 2.5 600 bar The compact type 521 pressure switch is based upon the Huba Control developed thick film technology where the pressure measuring cell is
More informationManual Power relay SR853
Manual Power relay SR853 Rev. 0 SR853 manual page2 Safety Guidelines for explosion proof devices Application and Standards This instruction manual applies to explosion protected control systems of protection
More informationTightness controls TC 1 3 and TC 4
Tightness controls TC 1 3 and TC 4 Test of both safety valves Short test period thanks to logical decision-making in the program sequence Adjustable test period which can be adapted to different systems
More information3-phase Line Reactor to reduce mains disturbances
DATASHEET AC Line Reactors RWK 3062 3-phase Line Reactor to reduce mains disturbances 2% 3-phase line reactor for 690 V network Reducing harmonics on the mains side Reducing commutation notches Limiting
More informationChromaLit Extruded Linear
ChromaLit Extruded Linear CL-XXX-LIN0-PC0 Series Product Overview Intematix Remote Phosphor light source will change the way you approach solid-state lighting design. ChromaLit offers beautiful light quality
More informationRELAY PRODUCT GUIDE CONTENTS
RELAY PRODUCT GUIDE CONTENTS 1.0 ABOUT FUJITSU COMPONENTS 1.1 Who we are Page 2 2.0 PRODUCT LINE-UP 2.1 Automotive relays Page 3 2.2 Power relays Page 8 2.3 Signal relays Page 16 2.4 High frequency relays
More informationVMR VMR-OTN VMR 6 bar
VMR VMR-OTN VMR 6 bar Safety solenoid valves for gas Fast opening and fast closing type DN8 DN150 delta-elektrogas.com EE161-03/17 VMR VMR-OTN VMR 6 bar Safety solenoid valves for gas Fast opening and
More informationLMP 307. Stainless Steel Probe. Stainless Steel Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % / 0.
LMP 07 Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % / 0. % FSO Nominal pressure from 0... mho up to 0... 50 mho Output signals -wire: 4... 0 ma -wire: 0...
More informationKey Comparison of Safety Requirements in Europe, North America and Australia for Electronic Products
Key Comparison of Safety Requirements in Europe, North America and Australia for Electronic Products Mr. K.F. Siu 15 April, 2010 www.intertek.com 1 Presentation Agenda Standards For Audio/Video Product
More informationVersatile Filtered Power Entry Module
DATASHEET IEC Inlet Filters FN 390 Versatile Filtered Power Entry Module Rated currents up to 10 A For one or two fuses Fuses Ø6.3 x 32 mm or Ø5 x 20 mm 2-pole rocker switch Voltage selector Optional earth
More informationUNIK 5600/5700 Marine Certified Pressure Sensing Platform
GE Measurement & Control UNIK 5600/5700 Marine Certified Pressure Sensing Platform The new UNIK 5600/5700 carries marine certification for most zones on-board ship, as well as Intrinsically Safe certifications.
More informationElectronic gas volume corrector model DGVC-04
Electronic gas volume corrector model DGVC-04 1. Introduction The following user s manual gives information about the installation, configuration, usage and storage of the electronic gas volume corrector
More informationConductor Bushings Series 8174
> Current lead-in for Ex d enclosures > 1 to 72 conductors combined in one current lead-in > Series screw-in plug-in > For voltages up to max. 1 V > For size conductor up to 7 mm 2 www.stahl.de 3163E The
More information