Two Ferrule Tube Fittings 316 stainless steel ranging from 1/8" to 1" (6mm to 25mm) O.D.
|
|
- Emory McDonald
- 5 years ago
- Views:
Transcription
1 Two errule Tube ittings 316 stainless steel ranging from 1/8" to 1" (6mm to 25mm) valve & fitting
2
3 Introduction Vee-Lok tube fittings are designed to provide a leak-free connection and applied in chemical, petrochemical, oil refineries, shipbuilding, power generation and pulp and papers. The double ferrule design is a mechanism used for sealing and gripping tubing. Through the mechanical advantage and geometry, the tube fitting can overcome the variations in materials, wall thickness and hardness to provide an excellent seal performance. tube fitting The tube fitting consists of four parts: body, front ferrule, back ferrule and nut. The two ferrules separate sealing and tube gripping function and achieve excellent leak-free performance. eatures When the nut is tightened, the back and front ferrules move axially. The axial movement does not allow any torque transfer from the fitting to tubing and the mechanical properties of tubing are maintained. The front ferrule creates a seal against the fitting body and on the tubing outside diameter while the back ferrule axially advances the front ferrule and radially provides an effective tube grip. Material Vee-Lok twin ferrule tube fittings are made of 316 stainless steel and supplied in metric and imperial sizes from 6mm to 25mm and 1/8 to 1 Straight fittings are machined from bar stock conforming to ASTM A276, ASME SA479, ASTM A479 and shaped bodies from forging ASME SA182 and ASTM A182. Easy Reference Heads of tables are differentiated with color below: Identifies fractional size Identifies metric size Pressure Ratings The pressure ratings of the Vee-Lok tube fittings are determined by the wall thicknesses of tubings on which they are installed. The maximum working pressure of tubings are listed in MAWP Table on following page. Note: Material strength and allowable working pressure decrease as the temperature increases Two errule Tube itting 1
4 Temperature Ratings 316 stainless steel: -321 to 1200 (-196 C to 649 C) Tubing In order to ensure reliable and leak-free installation, tubing should be considered as one of fitting components. Tubing Selection Hardness The metal tubing must be softer than the fitting materials. In general, it is recommended a fully annealed 304 or 316 stainless steel tubing meeting ASTM A269 or equivalent with hardness Rockwell HRB80 or less to work properly with VEE-LOK tube fittings. Surface Tubing must have a smooth surface free from dirt, scratches, weld seam and draw mark. Ovality Do not force the tubing into the fitting when tubing is oval or out of roundness. It may damage the fitting sealing mechanism on nut, ferrules and body. Wall thickness Temperature, pressure, vibration and shock conditions must be considered when selecting the wall thickness. A too thin wall may collapse and too thick wall may not be properly deformed by ferrule action. Tubing Handling Tubing ends should be capped to keep from dirts during transportation and storage. Do use correct tube cutter to avoid excessive deformation. Do deburr tube ends prior to installation. Use good quality tubing for the best performance. Gas Application Gases have very small molecules and can escape even the most minute leak path because of surface imperfections. Do not use thin wall tubing for gas applications. Heavier wall tubing resists the ferrule action more than thin wall does. The minimum wall thickness for gas application is shown for reference. ractional Tubing Tubing Example Nominal Min. Wall Thickness Tubing Nominal Min. Wall Thickness 1/ / / / / / / Metric Tubing Tubing Nominal Min. Wall Thickness Tubing Nominal Min. Wall Thickness 6mm 0.8mm 16mm 1.5mm 8mm 1.0mm 18mm 1.5mm 10mm 1.0mm 20mm 1.8mm 12mm 1.0mm 22mm 2.0mm 15mm 1.2mm 25mm 2.2mm Temperature Derating The working pressure varies depending on temperature. The working pressure at various temperatures can be obtained by multiplying the working pressure at ambient temperature (-20 to 100 or -29 C to 37 C) by the temperature derating factor in the table below. Temperature ( ) 316 SS To obtain the working pressure of 316SS 1/4 x wall tube at 800 Working pressure of the above tubing at ambient temperature: 5,100 psi Temperature derating factor at 800 : 0.79 Working pressure at 800 : 4,029 psi (from 5,100 psi multiplied by 0.79) 2 Two errule Tube itting
5 Maximum Allowable Working Pressure Table tube fitting ully annealed austenitic type 304 or 316 seamless tubing ASTM A269 or ASTM A213, or equivalent. Tubing to be free from dirt, scratches, weld seam, draw mark and suitable for bending and flaring. Recommended hardness: 80 HRB or less. Stainless Steel Tube Inch Size Tube (Inches) Tube Wall Thickness in Inches /8 10,900 7,500 1/4 5,100 5,800 10,200 5/16 4,000 4,800 8,000 Working Pressure in psig 3/8 3,300 3,700 6,500 1/2 2,600 2,400 5,100 6,700 3/4 or gas service, applying 2,000 3,300 4,200 the wall thickness only on 7/8 outside of shade boundary 2,800 3, ,400 3,100 Stainless Steel Tube Metric Size Tube (mm) Tube Wall Thickness in Millimeters ,500 7,400 9,400 11,500 12, ,700 5,800 6,800 8,400 9,300 Working Pressure in psig 10 3,700 4,200 5,300 6,500 7, ,000 3,400 4,400 5,300 5,900 6,600 7, ,500 3,200 3,900 4,300 5,300 5, or gas service, applying 2,800 3,400 3,800 4,700 5,000 the wall thickness only on 20 outside of shade boundary 2,500 3,000 3,400 4,200 4, ,300 2,800 3,000 3,800 4, ,000 2,400 2,700 3,300 3,500 Allowable stress of 20,000 psi between -20 and 100 (-29 C and 37 C) based on ultimate tensile strength 75,000 psi Based on minimum wall thickness and maximum allowable by ASTM A269 Note: 1. Pressure calculations are based on maximum and minimum wall thickness without allowance for corrosion and erosion. 2. igures shown are not for design purpose but for reference only. The accuracy of information here is not liability of our company. Two errule Tube itting 3
6 Identification of Metric Size Metric tube fittings are machined with the stepped shoulders on the body and the hex nut for identification. The metric nut must not be used on fractional body, and vice versa. Installation Instructions VEE-LOK two ferrule tube fittings are supplied finger tight and ready for immediate use. A leak tight and mechanically safe installation is easily made by turning the nut 1.1/4 turns or 3/4 turn for a smaller size in 1/8 Prior to installation, make sure to have tube end cut 90 degree and remove burrs from inside and outside tube ends. Sealing Taper Thread NPT, BSPT (BS21) and ISO7/1 taper threads must use a thread sealant and proper lubrication to provide leak-free connection and prevent from galling that is mostly common in stainless steel. 1. Insert well prepared tubing into VEE-LOK two ferrule tube fittings until tubing end is firmly seated on the body shoulder. ISO Parallel Thread With ISO 228/1, BSPP (BS2779) parallel thread requires a sealing washer. This seal may either be a metal (copper is standard) gasket or a Bonded Seal (elastomer bonded to a metal retaining washer). See 2 different seals below /4 Turn orm A No reverse angle is used. A self centering taper is used at hex which centers a Bonded washer seal ( usually metal and elastomer to seal the surface surrounding the female thread. 1-1/4 Turn 2. Mark the nut at position no.6 for identification of starting point to count the number of turns When holding the fitting body with a wrench to prevent the body from turning, tighten the nut with another wrench 1.1/4 turns to position no.9. orm B A metal gasket (usually copper) gasket performs the sealing between the face of body and the surface surrounding the female threads. Note: It is the responsibility of users to use the products for their specific application and adequately apply sealant and lubrication to system installation. Improper installation or intermixing components of other manufacturers may cause personal injury or property losses. 4 Two errule Tube itting
7 Ordering Information Example 1: Tube to Pipe ends M MC 8-4 BSPT M is prefixed to designate metric VEE-LOK tube fittings. ractional size remains blank. 2 Name of itting (MC=Male Connector) 3 Tube Designator 4 Pipe Thread Designator 5 BSPT or BSPP is to specify thread type. NPT thread remains blank. Example 2: Tube to Tube ends M U M is prefixed to designate metric VEE-LOK tube fittings. 2 Name of itting (U=Union) 3 Tube Designator Example 3: Tee & Cross In tee shown below, 1 and 2 are referred to as run and 3 is referred to as branch. 1 2 Identifier MC BMC ME MRT MBT UT U RU BU UE UC C BC E RT BT R MA A N B P CP tube fitting itting Name Designator Description Male Connector Bulkhead Male Connector Male Elbow Male Run Tee Male Branch Tee Union Tee Union Reducing Union Bulkhead Union Union Elbow Union Cross emale Connector Bulkhead emale Connector emale Elbow emale Run Tee emale Branch Tee Reducer Male Adapter emale Adapter Nut Back errule ront errule Plug Cap 3 In cross shown below, 1 and 2 are referred to as run and 3 and 4 are referred to as branch Tube Designator Inch Identifier Metric Identifier 1/ / / / / / Pipe Thread Designator Nominal Size 1/8 1/4 3/8 1/2 3/4 1 Applicable Specifications NPT ANSI B (NPT) ISO Tapered 2BSPT 4BSPT 6BSPT 8BSPT 12BSPT 16BSPT ISO Parallel 2BSPP 4BSPP 6BSPP 8BSPP 12BSPP 16BSPP BS 21(BSPT), ISO7/1, JIS B0203(PT) BS 2779 (BSPP), DIN ISO 228/1, JIS B0202(P) Two errule Tube itting 5
8 General Information 01~04 Ordering Information 05 Tube to Tube Union Union Tee 19 UT Tube to Male Pipe Union 20 U Male Connector 07~08 MC Bulkhead Male Connector 09 BMC Reducing Union 21 RU Bulkhead Union 22 BU Male Elbow 10~11 ME Union Elbow 23 UE 6 Male Run Tee 12 MRT Male Branch Tee 13 MBT Tube to emale Pipe emale Connector 14 C Bulkhead emale Connector 15 BC emale Elbow 16 E emale Run Tee 17 RT emale Branch Tee 18 BT Two errule Tube itting Union Cross 24 UC Port Connector Reducer 25~26 R Male Adapter 27 MA emale Adapter 28 A Component Nut 29 N Back errule 30 B ront errule 31 Plug Cap 32 P CP
9 MALE CONNECTOR BORE L H MALE PART NO. L H BORE 1/8 1/8 MC / /8 1/4 MC / /8 3/8 MC / /8 1/2 MC / /4 1/8 MC / /4 1/4 MC / /4 3/8 MC / /4 1/2 MC / /4 3/4 MC / /16 1/8 MC / /16 1/4 MC / /16 3/8 MC / /8 1/8 MC / /8 1/4 MC / /8 3/8 MC / /8 1/2 MC / /8 3/4 MC / /2 1/8 MC / /2 1/4 MC / /2 3/8 MC / /2 1/2 MC / /2 3/4 MC / /2 1 MC / /8 3/8 MC / /8 1/2 MC / /8 3/4 MC / /4 1/2 MC / /4 3/4 MC / /4 1 MC / /2 MC / /4 MC / MC / Two errule Tube itting 7
10 MALE CONNECTOR BORE L H MALE PART NO. L H BORE 6 1/8 MMC /4 MMC /8 MMC /2 MMC /8 MMC /4 MMC /8 MMC /2 MMC /8 MMC /4 MMC /8 MMC /2 MMC /4 MMC /4 MMC /8 MMC /2 MMC /4 MMC /4 MMC /8 MMC /2 MMC /2 MMC /8 MMC /2 MMC /4 MMC /2 MMC /4 MMC /2 MMC /4 MMC /4 MMC /2 MMC /4 MMC MMC Two errule Tube itting
11 BULKHEAD MALE CONNECTOR BORE L H MALE PART NO. L H Panel Hole Size Max. Panel Thick. 1/8 1/8 BMC /2 21/ /4 1/8 BMC /8 29/ /4 1/4 BMC /8 29/ /8 1/4 BMC /4 37/ /8 3/8 BMC /4 37/ /8 1/2 BMC /8 37/ /2 3/8 BMC /16 49/ /2 1/2 BMC /16 49/ /4 3/4 BMC /16 1-1/ BMC /8 1-21/ BORE MALE PART NO. L H Panel Hole Size Max. Panel Thick. 6 1/8 MBMC /4 MBMC /8 MBMC /4 MBMC /4 MBMC /8 MBMC /2 MBMC /4 MBMC /8 MBMC /2 MBMC BORE Two errule Tube itting 9
12 MALE ELBOW H L2 MALE PART NO. L2 H BORE BORE 1/8 1/8 ME / /8 1/4 ME / /4 1/8 ME / /4 1/4 ME / /4 3/8 ME / /4 1/2 ME / /16 1/8 ME / /16 1/4 ME / /8 1/8 ME / /8 1/4 ME / /8 3/8 ME / /8 1/2 ME / /8 3/4 ME /2 1/4 ME / /2 3/8 ME / /2 1/2 ME / /2 3/4 ME /8 3/8 ME /8 1/2 ME /8 3/4 ME /4 1/2 ME /4 3/4 ME /4 ME / ME / Two errule Tube itting
13 MALE ELBOW H L2 MALE BORE PART NO. L2 H BORE 6 1/8 MME / /4 MME / /8 MME / /2 MME / /8 MME / /4 MME / /8 MME / /2 MME / /8 MME / /4 MME / /8 MME / /2 MME / /4 MME / /8 MME / /2 MME / /4 MME /2 MME /8 MME /2 MME /4 MME /2 MME /4 MME /2 MME / /4 MME / /4 MME / /4 MME / MME / Two errule Tube itting 11
14 MALE RUN TEE L2 H BORE MALE PART NO. L2 H BORE 1/8 1/8 MRT / /8 1/4 MRT / /4 1/8 MRT / /4 1/4 MRT / /16 1/8 MRT / /8 1/4 MRT / /8 3/8 MRT / /2 3/8 MRT / /2 1/2 MRT / /8 1/2 MRT /4 3/4 MRT /4 MRT / MRT / MALE PART NO. L2 H BORE 6 1/8 MMRT / /4 MMRT / /8 MMRT / /4 MMRT / /4 MMRT / /2 MMRT / /4 MMRT / /8 MMRT / /2 MMRT / MMRT / Two errule Tube itting
15 MALE BRANCH TEE L H L2 BORE MALE PART NO. L L2 H BORE 1/8 1/8 MBT / /8 1/4 MBT / /4 1/8 MBT / /4 1/4 MBT / /16 1/8 MBT / /8 1/4 MBT / /8 3/8 MBT / /2 3/8 MBT / /2 1/2 MBT / /8 1/2 MBT /4 3/4 MBT MALE PART NO. L L2 H BORE 6 1/8 MMBT / /4 MMBT / /8 MMBT / /4 MMBT / /4 MMBT / /8 MMBT / /4 MMBT / /8 MMBT / /2 MMBT / /2 MMBT Two errule Tube itting 13
16 EMALE CONNECTOR EMALE PART NO. L BORE 1/8 1/8 C / /8 1/4 C / /4 1/8 C / /4 1/4 C / /4 3/8 C / /4 1/2 C / /16 1/8 C / /16 1/4 C / /8 1/8 C / /8 1/4 C / /8 3/8 C / /8 1/2 C / /8 3/4 C / /2 1/4 C / /2 3/8 C / /2 1/2 C / /2 3/4 C / /8 3/8 C / /8 1/2 C / /8 3/4 C / /4 1/2 C / /4 3/4 C / /4 C / C / EMALE PART NO. L BORE 6 1/8 MC /4 MC /8 MC /2 MC /8 MC /4 MC /8 MC /4 MC /8 MC /2 MC /4 MC /8 MC /2 MC /8 MC /2 MC /2 MC /4 MC /4 MC /4 MC MC L 14 Two errule Tube itting
17 BULKHEAD EMALE CONNECTOR L EMALE PART NO. L Panel Hole Size Max. Panel Thick. 1/8 1/8 BC /16 21/ /4 1/8 BC /8 29/ /4 1/4 BC /4 29/ /8 1/4 BC /4 37/ /2 3/8 BC /16 49/ /2 1/2 BC /16 49/ BORE EMALE PART NO. L Panel Hole Size Max. Panel Thick. 6 1/8 MBC /4 MBC /8 MBC /4 MBC /8 MBC /2 MBC BORE Two errule Tube itting 15
18 EMALE ELBOW L2 EMALE PART NO. L2 BORE 1/8 1/8 E / /8 1/4 E / /4 1/8 E / /4 1/4 E / /4 3/8 E / /4 1/2 E /16 1/8 E / /16 1/4 E / /8 1/8 E / /8 1/4 E / /8 3/8 E / /8 1/2 E /2 1/4 E / /2 3/8 E / /2 1/2 E /8 3/8 E /8 1/2 E /4 1/2 E /4 3/4 E / /4 E / EMALE PART NO. L2 BORE 6 1/8 ME / /4 ME / /4 ME / /4 ME / /8 ME / /2 ME /4 ME / /8 ME / /2 ME /2 ME Two errule Tube itting
19 EMALE RUN TEE L2 EMALE PART NO. L2 BORE 1/8 1/8 RT / /4 1/8 RT / /4 1/4 RT / /8 1/4 RT / /2 3/8 RT /8" /2 1/2 RT /4 3/4 RT / /4 RT / EMALE PART NO. L2 BORE 6 1/8 MRT / /4 MRT / /8 MRT / /4 MRT / /4 MRT / /8 MRT /8" /2 MRT /2 MRT Two errule Tube itting 17
20 EMALE BRANCH TEE L L2 EMALE PART NO. L L2 BORE 1/8 1/8 BT / /4 1/8 BT / /4 1/4 BT / /8 1/4 BT / /2 1/4 BT / /2 3/8 BT /8" /2 1/2 BT /8 1/2 BT /4 3/4 BT / /4 BT / EMALE PART NO. L L2 BORE 6 1/8 MBT / /4 MBT / /8 MBT / /4 MBT / /4 MBT / /8 MBT /8" /2 MBT /2 MBT Two errule Tube itting
21 UNION TEE L PART NO. L BORE 1/8 UT / /4 UT / /16 UT / /8 UT / /2 UT / /8 UT /4 UT UT / PART NO. L BORE 6 MUT / MUT / MUT / MUT / MUT MUT MUT MUT MUT / MUT / MUT / Two errule Tube itting 19
22 UNION L PART NO. L BORE 1/8 U / /4 U / /16 U / /8 U / /2 U / /8 U / /4 U / U / PART NO. L BORE 6 MU MU MU MU MU MU MU MU MU MU MU Two errule Tube itting
23 REDUCING UNION T TX L2 T TX PART NO. L L2 BORE 1/4 1/8 RU / /16 1/8 RU / /16 1/4 RU / /8 1/8 RU / /8 1/4 RU / /8 5/16 RU / /2 1/8 RU / /2 1/4 RU / /2 3/8 RU / /8 3/8 RU / /8 1/2 RU / /4 1/4 RU / /4 3/8 RU / /4 1/2 RU / /4 5/8 RU / /2 RU / /4 RU / L T TX PART NO. L L2 BORE 8 6 MMRU MMRU MMRU MMRU MMRU MMRU MMRU MMRU MMRU MMRU MMRU Two errule Tube itting 21
24 BULKHEAD UNION L2 L PART NO. L L2 Panel Hole Size Max. Panel Thick. 1/8 BU /2 21/64 1/ /4 BU /8 29/64 17/ /16 BU /16 33/64 9/ /8 BU /4 37/64 9/ /2 BU /16 49/64 19/ /8 BU /16 57/64 19/ /4 BU /16 1-1/64 25/ BU /8 1-21/64 15/ BORE PART NO. L L2 Panel Hole Size Max. Panel Thick. 6 MBU MBU MBU MBU BORE 15 MBU MBU MBU MBU MBU Two errule Tube itting
25 UNION ELBOW PART NO. BORE 1/8 UE / /4 UE / /16 UE / /8 UE / /2 UE / /8 UE /4 UE UE / PART NO. BORE 6 MUE / MUE / MUE / MUE / MUE MUE MUE MUE MUE / MUE / MUE / Two errule Tube itting 23
26 UNION CROSS L PART NO. L BORE 1/8 UC / /4 UC / /8 UC / /2 UC / PART NO. L BORE 6 MUC / MUC / MUC / MUC / Two errule Tube itting
27 REDUCER T TX L2 L T TX PART NO. L L2 BORE 1/8 1/8 R / /8 1/4 R / /4 1/8 R / /4 1/4 R / /4 3/8 R / /4 1/2 R / /8 1/4 R / /8 3/8 R / /8 1/2 R / /2 1/4 R / /2 3/8 R / /2 3/4 R / /4 1/2 R / Two errule Tube itting 25
28 REDUCER T TX L2 L T TX PART NO. L L2 BORE 6 8 MR MR MR MR MR MR MR MR MR MR MR MR MR MR MR MR MR MR MR MR MR MR MR MR MR MR Two errule Tube itting
29 MALE ADAPTER VEE-LOK BORE L2 L MALE PART NO. L L2 A BORE 1/8 1/8 MA / /8 1/4 MA / /4 1/8 MA / /4 1/4 MA / /4 3/8 MA / /4 1/2 MA / /16 1/8 MA / /16 1/4 MA / /8 1/8 MA / /8 1/4 MA / /8 3/8 MA / /8 1/2 MA / /2 1/4 MA / /2 3/8 MA / /2 1/2 MA / /8 1/2 MA / /4 1/2 MA / /4 3/4 MA / /4 MA / MA / MALE PART NO. L L2 A BORE 6 1/8 MMA /4 MMA /4 MMA /8 MMA /4 MMA /8 MMA /2 MMA /4 MMA /2 MMA /2 MMA /2 MMA /4 MMA /4 MMA MMA Two errule Tube itting 27
30 EMALE ADAPTER VEE-LOK BORE L EMALE PART NO. L A BORE 1/8 1/8 A / /8 1/4 A / /4 1/8 A / /4 1/4 A / /4 3/8 A / /4 1/2 A / /16 1/4 A / /8 1/8 A / /8 1/4 A / /8 3/8 A / /8 1/2 A / /2 1/4 A / /2 3/8 A / /2 1/2 A / /8 1/2 A / /4 1/2 A / /4 3/4 A / /4 1 A / /4 A / A / EMALE PART NO. L A BORE 6 1/8 MA /4 MA /4 MA /4 MA /8 MA /2 MA /4 MA /8 MA /2 MA /2 MA /4 MA /2 MA /4 MA MA Two errule Tube itting
31 NUT L Two errule Tube itting 29
32 BACK ERRULE 30 Two errule Tube itting
33 RONT ERRULE Two errule Tube itting 31
34 PLUG CAP 32 Two errule Tube itting
35
36 Vertex Co., Ltd. 3, No.3, Lane 551, Sec. 1, Wanshou Rd., Gueishan Township, Taoyuan County 33351, Taiwan Tel: ax: vertex.jo@msa.hinet.net
COMPRESSION TUBE FITTINGS
COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM LET-LOK TUBE FITTINGS DESCRIPTION The HAM-LET GROUP has produced high quality tube and pipe LET-LOK HOW DOES IT WORK? A HAM-LET has gained an
More informationCOMPRESSION TUBE FITTINGS
COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM LET-LOK TUBE FITTINGS DESCRIPTION The HAM-LET GROUP has produced high quality tube and pipe fittings in various materials for high pressure applications
More informationCOMPRESSION TUBE FITTINGS 1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC
1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC LET-LOK TUBE FITTINGS DESCRIPTION HAM-LET LET-LOK HOW DOES IT WORK? HAM-LET LET-LOK LET-LOK LET-LOK HAM-LET LET-LOK 1 4 3 2 4 Tube 1 2 3 1 2 3 4 6 LET-LOK
More informationFITTING IDENTIFICATION AMERICANT THREAD TYPES APPENDIX ALFAGOMMA // APPENDIX. Dash numers. NPTF (National Pipe Tapered Fuel)
// FITTINGS GUIDelines FITTING IDENTIFICATION numers Most fluid piping system sizes are measured by dash numbers. These are universally used abbreviations for the size of component expressed as the numerator
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More information// ADapters GUIDelines
// ADapters GUIDelines ADAPTER SELECTION Selection of an appropriate ALFAGOMMA adapter for a given application depends on the fluid system operating parameters listed below and the tube material and wall
More informationTorque Specifications
SENR3130-10 Torque Specifications All Caterpillar Products S/N From the library of Barrington Diesel Club CONTENT General Information 01/07/2005 Introduction to Torque 01/07/2005 Torque-Turn 01/07/2005
More informationFittings, Materials and Tubing Guide. Instrumentation Products
Fittings, Materials and Tubing Guide Fittings, Materials and Tubing Guide Instrumentation Products MPI Medium Fittings Introduction Hannifin Fittings are engineered and manufactured to provide secure,
More informationHigh Pressure Equipment Taper Seal Valves, Fittings and Tubing
igh quipment Taper Seal Valves, ittings and Tubing 0,000 and,000 psi service igh quipment Company has developed the Taper Seal line of products to assure safe and easy plumbing through,000 psi. These needle
More informationWorld Area Differences Technical Information
World Area Differences Technical Information DMISC2047X02 This document is to give more information about the following: Porting & Threads Cleaning Procedures Conversion Tables PORTING & THREADS NPT (National
More informationHigh Pressure Equipment Medium Pressure Valves, Fittings and Tubing
igh Pressure quipment Medium Pressure Valves, ittings and Tubing service igh Pressure quipment Company has developed a line of Medium Pressure products to assure safe and easy plumbing through. These needle
More informationContinental Industries TRANSITION FITTINGS or FAX Visit
Continental Industries TRANSITION FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
More informationHigh Pressure Equipment Medium Pressure Valves, Fittings and Tubing
igh Pressure quipment Medium Pressure Valves, ittings and Tubing service igh Pressure quipment Company has developed a line of Medium Pressure products to assure safe and easy plumbing through. These needle
More informationFITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI
Jetstream offers a wide variety of fittings with various connection types to fit your 20,000 psi application needs. The standard connection types, Type M, MP, and MP Tube lance, are available in standard
More informationGAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS
GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS CONTINENTAL INDUSTRIES, INC. The Ultimate Connection CONTINENTAL INDUSTRIES, INC. ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, Inc.,
More informationTHREAD/SCREW - Drill & Tap Chart
Machine Screw THREAD/SCREW Drill & Tap Chart Threads Per Inch Min Dia Alum, Brass, & Plasitcs 75% Thread Tap Drills Stainless Steel, Steels & Iron 50% Thread Clearance Hole Drills Close Fit All Materials
More informationvalve & fitting Optimize Your Costs
valve & fitting Optimize Your Costs www.veelok.com Create Your Best Value We, Vertex Co., Ltd., is a manufacturer of instrumentation valves and fittings for oil & gas, shipbuilding, chemical, petrochemical
More informationptfe and stainless steel hoses
ptfe and stainless steel hoses 3 table of contents Description P.004 Description of FX01 hoses P.004 Description of FX02 hoses P.004 Description of FX03 hoses P.005 Description of FX06 hoses P.005 DESCRIPTION
More informationPhastite Tube Connectors. Catalog 4235-PH March 2007
Phastite Tube Connectors Catalog 4235-PH March 2007 M10 Style Phastite Tube Connectors Contents Page 3 Phastite : The Concept Page 4/5 Phastite : The Benefits Page 6 Value Proposition Page 7/8 Design &
More informationPN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12
PN LINE PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN
More informationIntru-lok Flareless Bite Type Fittings
Intru-lok Flareless Bite Type Fittings 4300 atalog Flareless Bite Type Fittings Nuts, Ferrules, Inserts BIP Knurled Nut BI2 Nut BTI2 Nut and Ferrule TI2 Ferrule TIP Expander / Insert T23UI Insert HBI2
More informationProportional Relief Valves
www.swagelok.com Proportional Relief Valves R Series Liquid or gas service Set pressures from 10 to 6000 psig (0.68 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections 2 Proportional Relief Valves
More informationCalibration Fittings and Hoses
Calibration ittings and Hoses QH, QT, HQH and HQT Series ITOK Group ITOK GmbH (Headquarter) Sprendlinger andstr. 5, 63069 Offenbach am Main, Germany Tel.: +49 69 8900 4498 ax: +49 69 8900 4495 ITOK, Inc.
More informationprecision pipe fittings
Precision Pipe Fittings 1 8 to 1 sizes 316 stainless steel, brass, and exotic materials NPT threads HOKE PO Box 4866 Spartanburg, SC 29305-4866 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com Sales-hoke@circor.com
More informationSTC. Push-In Fittings & Polyurethane Tubing. Fine Quality. Precision Engineered Advanced Design. Excellent Prices
Precision Engineered Advanced Design Push-In Fittings & Polyurethane Tubing Catalog: PUB 2012 PUB 07 FIT STC Push-In Fittings & Polyurethane Tubing Fine Quality Excellent Prices A 1 connects fluid power
More informationBSI BSI 5200 THE NEW CAST 60 FITTINGS AN EASY ASSEMBLY A KNOWN PRODUCT, SAFE AND RELIABLE AVAILABLE IN CARBON AND STAINLESS STEEL
THE NEW CAST 60 FITTINGS AN EASY ASSEMBLY A KNOWN PRODUCT, SAFE AND RELIABLE AVAILABLE IN CARBON AND STAINLESS STEEL 55 THEORY OF OPERATION The CAST S.p.A. fitting according to the norms, is a mechanical
More informationCompression Fittings
Advantages o flaring, soldering or other preparation of tubing necessary to assemble. This economical fitting is readily available in a broad selection of styles. anufactured from CA 360, CA 35 or CA 377
More informationPropor tional Re lief Valve s
www.swagelok.com Propor tional Re lief Valve s R Series Liquid or gas service Set pressures from 10 to 6000 psig (0.68 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections Proportional Relief Valves
More informationContinental Industries STEEL SERVICE TEES or FAX Visit
Continental Industries STEEL SERVICE TEES 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
More informationshutoff valves 900 Series psig Manual Shutoff Valves
0 6000 psig Manual Shutoff Valves Features Zero leakage Protected o-ring Full flow passages Freedom from wire drawing Panel mount standard Hand wheel or toggle handle How it Works Closed O-ring seal on
More informationGeneral page Straight unions page Angle unions page Tee and L-unions page Gauge connection unions page 42
C 2610-00 Table of contents General page 3-13 DILO unions for pressure ranges from 100 320 bar Straight unions page 14-25 Weld-on tube unions page 14-16 Screw-in tube unions page 17-25 with metric / Whitworth-
More informationConnection Thread M, R(PT), Rc(PT) How to Order. Applicable tube O.D. Thread. 8 ø8. ø10. ø12. ø16. Tube (Rod)
One-touch Fittings Applicable etric Size Series K2 ow to Order Connection,, Rc(PT) Symbol 2 Body White Black Color Release button ight gray Blue Accessory Name Nipple K2N Different dia. nipple Adapter
More informationHow to Order. Applicable tube O.D. Thread. 8 ø8. ø10. ø12. ø16. Tube (Rod) Straight union. T Different dia. straight. F Female connector TX Male elbow
One-touch Fittings Applicable etric Size Series K2 ow to Order Connection,, Rc(PT) Symbol 2 Body White Black Color Release button ight gray Blue Accessory Name Nipple K2N Different dia. nipple Adapter
More informationINDUSTRIAL EXCESS ESS FLOW VALVES
INDUSTRIAL EXCESS ESS FLOW VALVES H-911 SERIES FEATURES n Stainless Steel Construction n MAWP 6000 psi (413 bar) n MAWT 400 F (204 C) n Variable connection sizes (1/8 to 1/2'' & 6 to 12mm) n Cv = 0.5 ;
More informationENGINEERING TECHNICAL REPORT
SSP DUOLOK FITTINGS ON 1.000 x 0.139 WALL 316SS TUBING ENGINEERING TECHNICAL REPORT SSP 8250 Boyle Parkway Twinsburg, Ohio 44087 U.S.A. mysspusa.com 1.330.425.4250 1 TABLE OF CONTENTS 1.0 Introduction
More informationLOKRING Stainless Steel (SS40) and Carbon Steel (CS) Pipe Fittings Table of Contents
38376 APOLLO PARKWAY WILLOUGHBY, OHIO USA 44094 www.lokring.com LOKRING Stainless Steel (40) and Carbon Steel (CS) s Table of Contents Information Page 2.. Design Page 3-4.. Pressure and Temperature Ratings
More informationPrestolok PLM Metal Push-to-Connect Fittings
Prestolok PM Metal Push-to-Connect ittings To meet your technical and environment requirements, Parker s Prestlok PM fittings offers the robustness, reliability and resistance to industrial fluids for
More informationPrestolok PLS Stainless Steel Push-to-Connect Fittings
Prestolok PS Stainless Steel Push-to-Connect ittings Parker s Prestolok PS fittings are ideal for conveying corrosive fluids in aggressive environments. Prestolok PS fittings provide corrosion resistance
More informationFlexible Metal Hose Products
Flexible Metal Hose Products Specialty Flexible Hose Solutions of Stainless Steel The AEROCOM Advantage Aerocom offers engineered solutions that address specific flexible piping challenges such as vibration,
More informationASYBCO 90 O ELBOW LONG RADIUS O.D. I.D.
90 O ELBOW LONG RADIUS Standard weight Extra strong Schedule 160 Double extra strong ASTM A-234 ASME / ANSI B16.9 Carbon and ferritic alloy steel Produced from X-rayed, stress-relieve welded pipe. Welds
More informationOperating Procedures for 10 through 24 GripTight MAX High Pressure Test Plug
EST Group DC2562 06/16 REV 2 03/18 Page 1 of 11 Operating Procedures for 10 through 24 GripTight MAX High Pressure Test Plug Curtiss Wright Proprietary This document is the property of and contains information
More informationHuat Siang Hardware Sdn. Bhd. Wire Mesh. Steel Sheet Piles. 1 of 33
Huat Siang Hardware Sdn. Bhd. Wire Mesh Steel Sheet Piles 1 of 33 2 of 33 Rails Purlins 3 of 33 4 of 33 Plates Plates 5 of 33 Hollow Sections HOLLOW SECTIONS SUPPLIER IN MALAYSIA - Huat Siang Hardware
More informationInstallation Instructions For Flat Seated Bolted Type RAH Series Disk Holders
Installation Instructions For Flat Seated Bolted Type RAH Series Disk Holders RA Series Rupture Disks 1. WARNING a) Read the complete instructions before attempting to install the rupture disk and holder
More informationAdapters and Tube Fittings Index
dapters and Tube Fittings Index lphabetical Index PRESSURE HOSE HIGH PRESSURE HOSE HOSE FITTINGS TUBE FITTINGS DESCRIPTION PGES DESCRIPTION PGES DESCRIPTION PGES DESCRIPTION PGES dapters 196 Braze and
More informationPVC FASTTAP SADDLES for IPS Mains. Main Size OUTLET 1 FPT 3/4 CTS (7/8 OD) COMPRESSION 1 CTS (1 1/8 OD) COMPRESSION 3/4 IPS COMPRESSION
PVC FASTTAP SADDLES PVC FASTTAP SADDLES for IPS Mains THE ULTIMATE CONNECTION OUTLET 3/4 IPS FEMALE SLIP OR 1 IPS MALE SLIP SOLVENT WELD 1 IPS FEMALE SLIP SOLVENT WELD 3/4 MPT 1 MPT 3/4 FPT MAIN 13/16
More informationTechnifit. Union Bulkhead Flow Controller. Fractional & Metric. Push-to-Connect Fittings. March 2006
Technifit TM Push-to-Connect Fittings March 2006 Male Female Elbow Tee Union Bulkhead Flow Controller Fractional & Metric PO Box 335 12740 State Route 4 Milford Center, Ohio 43045-0335 USA Phone: 937.349.4055
More informationTOTALINE BRASS FITTINGS
LONG NUT SHORT NUT & SHORTER NUT TO CAP NUT MALE CONNECTOR WT. PER LONG NUT 1/8 1.20 4000 25 P806-N2-2 3/16 1.70 2500 25 P806-N2-3 1/4 3.44 1400 50 P806-N2-4 5/16 4.60 900 25 P806-N2-5 3/8 7.90 550 50
More informationPressure Gauge Series
Pressure Gauge Series Compact Design. Connection type In line Plug in Panel mount Threaded Model Designation (Example) GP C 15 U10 U 1 Type Pressure Gauge 1 Type 2 Series 4 Wrench size 3 Thread size/ Tube
More informationInstallation, Operation and Maintenance Manual for Back Pressure Regulator
Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN
More informationPressure Dump Valve Service Kit for Series 3000 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 000 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00, 400, 500, and 700 applicator
More informationSimple to install connection fails. The Talbot Pushfit fitting is pressure rated PN 16.
Talbot Pushfit Talbot Pushfit - Fittings for Water Pipe Talbot Grippa Universal Service Connector The Talbot Pushfit connection is a tried and tested method of connecting low, The Talbot Grippa is a universal
More informationAutomotive Stainless Steel Industrial Utility
Automotive Stainless Steel Industrial Utility Industrial Automotive Transportation & Automotive Fittings Eldon James Industrial & utility fittings Biofuels Compatible Fittings Kits: Kynar Fittings - resistant
More informationCONNECTION > Super-rapid fittings Series 6000 GENERAL DATA. Fitting with connecting tube. Sprint
Super-rapid fittings for plastic tubes Series 6000 Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3, M5, M6, M7), BSP (G1/8, G1/, G3/8, G1/2, G3/), BSPT (R1/8,
More informationV46 Series 2-Way Pressure-Actuated Water-Regulating Valves With Union Fittings
Installation Instructions V46 Issue Date 11//1 V46 Series -Way Pressure-Actuated Water-Regulating Valves With Union Fittings Application IMPORTANT: The V46 Series -Way Pressure-Actuated Water-Regulating
More informationDual Solenoid Gas Valve Installation
Installation IMPORTANT: These instructions are intended as a guide for qualified personnel installing or servicing FLYNN Gas Products. Carefully follow all instructions in this bulletin and all instructions
More informationVCO O-ring Face Se al Fit tings
www.swagelok.com O-ring Face Se al Fit tings /8 to sizes 36 or 36L stainless steel, NPT, S thread, and weld connections 2 O-ring Face Seal Fittings ontents Features........................................
More informationPRESSURE REGULATORS UPSTREAM DIFFERENTIAL PRESSURE. APPLICATION: For maintaining a constant differential pressure across meter.
PRESSURE REGULATORS UPSTREAM DIFFERENTIAL PRESSURE APPLICATION: For maintaining a constant differential pressure across meter. PRESSURE RANGE: Steel: 10 psig to 300 psig CAPACITY: Refer to Table of Contents.
More informationHIGH-PRESSURE RELIEF VALVES
HIGH-PRESSURE RELIEF VALVES H-9HP SERIES FEATURES n St.St. 316 Construction n MAWT up to 6 psi n Set Pressure from 5 psig to 6 psig ( 3.5 to 4 bar) n Identifying colored springs for each pressure range
More informationThread Gages Tolerances
Class X Thread Gage s on Half-Angle of Thread ± N NN' on Major or Minor Diameter on Pitch Diameter Above Above /2 Dia. 4 Dia. Through Through 4 Dia. 8 Dia. s Above 8 Dia. Through 2 Dia. Threads per Inch
More information(1) Type (2) Thread size (T) (3) Wrench size specification : inch spec. (NPT, UNF) : mm spec. (M, R)
This exhaust needle valve, which comes with silencer, controls the exhaust flow rate. The valve can be attached directly to a solenoid valve where a cylinder or like mechanism has no sufficient space around
More informationInstallation Instructions and valve Maintenance Rev. 0 of 21/09/15
ASSEMBLING PROCEDURE AND VALVE MAINTENANCE 1.0.... Safety Information 2.0.. INTRODUCTION 3.0 VARIATIONS 4.0..ASSEMBLING PROCEDURE FOR THE STEM 5.0 ASSEMBLING PROCEDURE FOR OUTLET CONNECTIONS 6.0 PROCEDURE
More informationV48 Series 3-Way Pressure-Actuated Water-Regulating Valves With Union Fittings
Installation Instructions V48 Issue Date 08/30/01 V48 Series 3-Way Pressure-Actuated Water-Regulating Valves With Union Fittings Application IMPORTANT: The V48 Series 3-Way Pressure-Actuated Water-Regulating
More informationQuality Plastic Pipe Fittings. Technical Data. Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed
Quality Plastic Pipe Fittings Technical Data Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed Effective April 1, 2002 PIPE DIMENSIONS IPS-IRON PIPE SIZE Minimum
More informationTank Blanketing Pressure Regulators RHPS Series
www.swagelok.com Tank Blanketing Pressure Regulators RHPS Series Types: pressure reducing and vapor recovery 16L stainless steel construction 1/2, 1, and 2 in. end connections Working pressures up to 22
More informationTEK-M ANIFOLD 7500A. Manifolds. Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys ACCESSORIES
Technology Solutions TEK-M ANIFOLD 7500A Manifolds ACCESSORIES www.tek-trol.com Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys Introduction Tek-Trol s Tek-Manifold 7500A is available
More informationCautions : 1. Clogging of the element raises resistance to exhaust, thus lowering the
The Silencer, connected to the exhaust port of a device, suppresses the exhaust noise. The Silencer displays an excellent noise suppression effect. Three types are available for your selection. The element
More informationPush-In Fitting Type with Stop Valve
http://www.pisco.co.jp Push-In Fitting Type with Stop Valve 278 Push-In Fitting Type with Stop Valve for General Pneumatic Piping. Air Stop by Tube Disconnection. Easy Insertion and Disconnection by Double-passage
More informationCoiling Tube with Twist-Proof Fitting
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Anti-Twisting Coiling Tube for Air Tool Coiling Tube with Twist-Proof Fitting 306 Avoid Twisted Tube Problem
More informationCatalog No. C09118A. Nitrogen Gas Spring Linked System Components
Catalog No. C09118A Nitrogen Gas Spring Linked System Components Everything You Need to Construct a Linked System Linked Systems Introduction Numerous Piping Options Many customers recognize the benefits
More informationPressure Dump Valve Service Kit for Series 2300 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit
More informationGM-7000 Series CE Approved Gas Control Valve
Installation Instructions GM-7000 Issue Date November 9, 2012 GM-7000 Series CE Approved Gas Control Valve Installation IMPORTANT: These instructions are intended as a guide for qualified personnel installing
More informationCryogenic Liquid Ultimate Liquid Cylinder Hose
Cryogenic Liquid Ultimate Liquid Cylinder Hose Flexible Components brand liquid cylinder hose is considered the highest quality liquid cylinder hose on the market. It effectively transfers cryogenic liquids
More informationAutomatic Non-freeze Valve NF6
172-65134MA-03 (NF6) 30 March 2015 ISO 9001/ ISO 14001 Manufacturer Kakogawa, Japan is approved by LRQA LTD. to ISO 9001/14001 Automatic Non-freeze Valve NF6 Copyright 2015 by TLV CO., LTD. All rights
More informationIAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC PURPOSE
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC 157-20067 1 PURPOSE 1.1 The purpose of this standard is to establish an acceptable standard
More informationINSTALLATION, OPERATION AND MAINTENANCE GUIDE
INSTALLATION, OPERATION AND Placement in Pipeline System When installing Process Development & Control s ElastoTITE Elastomer-Hinged Check Valves in a pipeline, a minimum of five pipe diameters should
More informationInstruments AQDC. Aluminium Quick Disconnects. Light-weight, quick and reliable method a making a number of pneumatic connections.
AQDC Aluminium Quick Disconnects Instruments Light-weight, quick and reliable method a making a number of pneumatic connections. 8, 16, 24 and 32 port stainless steel quick disconnects. Available with
More informationBarbed Fittings. The World Standard. Dubl-Barb Fittings. Hose Barb Fittings. Compact One-piece Economical Reusable Use with Polyethylene Tubing
Barbed Fittings zfc05 ubl-barb Fittings Compact One-piece Economical Reusable Use with Polyethylene Tubing Hose Barb Fittings All Brass Construction Straight and etric Threads Beaded & Standard Hose Barbs
More informationInstallation Operating Instructions for Simple Duplex Manual Manifolds PX-TSD Series
Introduction Powerex manifolds are cleaned, tested and prepared for the indicated gas service and are built in accordance with the Compressed Gas Association guidelines. The manifold consists of a regulator
More informationFlange Bolt Torquing. for Resistoflex Plastic-Lined Piping Products. Torquing. Retorquing. Hydrotesting. Annual retorquing
Flange Bolt Torquing for Resistoflex Plastic-Lined Piping Products Torquing When assembling flange connections, always use a full complement of clean, new high strength A193-B7 bolting. If using stainless
More informationHardened Steel Washers
USS (Type A Wide) Flat Washers Hardened Steel Washers Grade 8 S.A.E. Dimensions American Standard Lbs. Per No./Pcs. Gauge M Pcs. Per Lb. 3/16 9/16 1/4 18 (3/64) 2.8 361 1/4 3/4 5/16 16 (1/16) 6.7 149 5/16
More informationCautions : 1. The gauge orientation on the GPU and GPM types can be changed by using
The compact-size pressure gauge can be installed in small spaces. With the built-in tube fitting type, tube connection is the only necessary step before pressure indication. Fluid medium Indicated pressure
More informationTHE HF-210 SERIES. Operating and Service Manual. Series includes all variants of HF-210/211. Issue A October 2014 *Section 6.
THE HF-210 SERIES Operating and Service Manual Series includes all variants of HF-210/211 Issue A October 2014 *Section 6.1 in development 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3.
More informationCautions : 1. Be careful when you release the Stop Fitting with some internal pressure
The flow-shut mechanism will operate to stop the air flow when the tube is disconnected and will allow air flow when the tube is connected. The double-passage structure facilitates easy connection and
More informationStatic dissipative Resin (Surface Resistivity : 10 4 ~10 7 Ω).
http://www.pisco.co.jp TUBE MAKE-TO-ORDER PRODUCTS for Anti-Static Environment Anti-Static 650 ESD Static dissipative Resin (Surface Resistivity : 10 4 ~10 7 Ω). Classification of conductivity region UE
More information4400 TwinHybrid Gas Seal
4400 TwinHybrid Gas Seal EQUIPMENT PREPARATION MECHANICAL SEAL INSTALLATION INSTRUCTIONS 1 2 200.005" 0,13 mm 125 µ" 3,2 µm R a 3 4 32 µ" 0,8 µm R a 1000 ±.002" 0,05mm CAUTIONS These instructions are general
More informationINSERT FITTINGS INSERT FITTINGS
Insert Tee Insert x Female Tee Insert Elbow Insert x Male Elbow Insert Coupling Insert x Male Adapter Insert x Female Adapter Insert Plug POLY and NYLON FITTINGS For use with Poly Tubing Fitting 1/2 3/4
More informationAll DZR stopvalve (BS1010). copper x copper. Gunmetal body. All parts in contact with water are made from material resistant to dezincification.
All DZR stopvalve (BS1010). copper x copper. Gunmetal body. All parts in contact with water are made from material resistant to dezincification. K551DZR Size Pattern No. Pack 1 Qty Pack 2 Qty Code Barcode
More informationPreparation and Installation of the Sanitary BDI-FLX Sensor and Connection to the BDI-FLX Interface Cable
GEP-6075 Rev. B 101574 Ref. I.D.: 16973 Preparation and Installation of the Sanitary BDI-FLX Sensor and Connection to the BDI-FLX Interface Cable WARNING USER SHOULD READ AND THOROUGHLY UNDERSTAND THESE
More informationcompression tube fittings
compression tube fittings table of contents roduct range overview.004 Technology overview.006 selecting the right fitting.008 -- Materials.008 -- Thread & nd Connections.009 -- Visual Identification.010
More informationAnderson Greenwood Series 93 Positive Pressure POSRV Installation and Maintenance Instructions
Before installation these instructions must be fully read and understood Installation and maintenance instructions for Series 93 Positive Pressure Pilot Operated Safety Relief Valves (POSRV). The intent
More informationHigh Pressure Tube Unions
High Pressure Tube Unions DILO. Sustainably tight. Made in Germany I am totally convinced by the high safety level even under extreme pressure. Christian Komm, Siemens AG, Power Generation DILO High pressure
More informationV146 Series 2-Way Pressure-Actuated Water-Regulating Valves
roduct/technical Bulletin V146 Issue Date November 20, 2002 V146 Series 2-Way ressure-actuated Water-Regulating s The V146 Series 2-Way ressure-actuated Water-Regulating s regulate water flow and control
More informationINSTRUMENTATION VALVES
INSTRUMENTATION VALVES INSTRUMENTATION BALL VALVES INTEGRAL-BONNET NEEDLE VALVES TOGGLE VALVES (TG Series) CHECK VALVES (CHV Series: For General Industry) RELIEF VALVES (RVL/RVH Series) INSTRUMENTATION
More informationPressure Reducing Valve DMV 755
Pressure Reducing Valve DMV 755 Nominal size DN 10 50 Nominal size 3/8 2 Nominal pressure PN 10 bar Features pressure setting range 1 to 9 bar control valve for reliable reduction of system pressures to
More information-Proline Polypropylene Single Wall Piping
EFFECTIVE: 6/01/11 Industrial Piping Systems Dimensional Guide #PDIM Proline Super Proline Single Chemical Wall Grade Piping PVDF System -Proline Single Wall Piping s 3 r z s www.asahi-america.com Dimensions
More informationPlok. Rapid Mating Multi-Pin Industrial Connector. Amphenol Industrial Sine Systems * Pyle Connectors Corporation
- Plok Rapid Mating Multi-Pin Industrial onnector mphenol Industrial Sine Systems * Pyle onnectors orporation eatures and enefits Rapid mate spring loaded, push to mate, pull to unmate coupling system
More informationACCESSORY KIT INSTALLATION INSTRUCTIONS
ACCESSORY KIT INSTALLATION INSTRUCTIONS 1NP0680 - PROPANE CONVERSION FOR USE WITH MODELS: PM8, PC8, PM9, PC9, FL9M, FL9C, FC9M, FC9C This conversion kit is to be installed by a qualified service agency
More information3/8" Dr. Air Butterfly Impact Wrench
8192106 3/8" Dr. Air Butterfly Impact Wrench Owner s Manual Read and understand all instructions before use. Retain this manual for future reference. Specifications Construction: Polished aluminum and
More information(1) Type (2) Cylinder dia. (3) Gripper action : Single-acting closing gripper (normally open) (4) Holder type
These are air finger models featuring light weight and miniature size. Blank fingers are available for the K type fingers as option. R-guide leaves no possibility of misalignment. The blank finger can
More informationMulti Core Tube for General Pneumatic Piping
http://www.pisco.co.jp TUBE MAKE-TO-ORDER PRODUCTS Multi Core for General Pneumatic Piping 616 Fine Flexibility. Simple Piping for Plural Actuators. Identification Line printed on Black Two-Core to Prevent
More information