Science + Talent = DuPont materials, the engineering skills of Hendrick Motorsports, and Jeff Gordon s driving prowess put #24 in the winner s circle
|
|
- Peter George
- 5 years ago
- Views:
Transcription
1
2 Science + Talent = Eddie Dickerson makes it sound so simple. Our goal is to build cars with the most power and the least resistance. The team that does it best gets the checkered flag. DuPont materials, the engineering skills of Hendrick Motorsports, and Jeff Gordon s driving prowess put #24 in the winner s circle Dickerson is director of chassis engineering at Hendrick Motorsports (HMS), the powerhouse North Carolina racing organization that is fielding seven teams in 2001 in NASCAR s Winston Cup, Busch Grand National and Craftsman Truck series. Driver Jeff Gordon in the #24 car sponsored by DuPont has seen enough checkered flags to capture three Winston Cup Series championships for HMS. Gordon s 55 th win June 10 in Michigan gave HMS its 100 th Winston Cup victory. Hendrick Motorsports was the first to build its own cars from scratch and is still the only team building the whole car including the engine, Electrical engineer Jim Wall electronically designs and stress-tests engine components before they are machined in Hendrick shops.
3 says Dickerson. Each team needs 15 to 20 cars a year. It takes about a week to build the chassis and another week to hang the sheet metal on it. Then it s off to the wind tunnel to study the car s down force. Even though every #24 car is built the same, each performs differently because it s hand-built. Hendrick Motorsports is leading the way technologically supported by more than a dozen graduate engineers to use the most advanced materials and science to build cars and then Two cars a primary and a back-up are prepared for each NASCAR race. duplicate the things that work. Earlier this year, for instance, Jeff really liked the car he drove at Atlanta, so we digitized it by electronically measuring 15,000 points on the body. Having all this data available should help us build a match. Checkered flags go to the cars that generate the most down force and, more important, make the best use of it. Explains Dickerson: We try to adjust the balance of the car springs, shocks, tire pressure and such as precisely as possible so the car will maintain its grip on the track in corners. This is what TV announcers are talking about when they say a car is loose or tight not enough grip or too much. If the car is balanced frontto-back and side-to-side, the driver can go through corners without letting off the gas significantly. Obviously, the driver who can keep his foot on the gas the most has an advantage. He notes that circumstances are different at short tracks such as Bristol, Martinsville and Richmond where drivers must brake often hard to negotiate corners. Pristine in the shop, hard-working brake assemblies glow fiery orange on short tracks. Car handling isn t all springs and shocks, however. HMS engineers are working on a radiator that will cool more efficiently so they can then reduce the size of the air opening in the front grill. This, in turn, will give the aerodynamic experts more control of the air around the car to generate more down force. Besides building engines, we re intensely involved with GM in engine development, testing parts for durability and performance, says Randy Dorton (right), director of engine development, with Rob Benson, director of dyno operations.
4 As NASCAR racing has become more sophisticated, taking the checkered flag depends more and more on the smallest of details, points out Randy Dorton, director of the HMS engine program. Much of our R&D effort now goes into adapting technology so we can find those elusive hundredths of a second that add up to wins. For example, while we were looking for a new material for engine bearing applications, we learned that DuPont TM Vespel polyimide resin is used to make thrust washers in an Allison transmission that s standard equipment on some GM vehicles. This production use immediately gave us All #24 cars are painted with DuPont ChromaPremier from DuPont Automotive Finishes. confidence to try it in our bearing application. We ve since replaced needle bearings in the rocker area with Vespel parts and trimmed weight in the process. The strength of Vespel allows us to get good pivoting and still use less metal in the rocker area. And because the Vespel needs only slight lubrication, less oil has to be pumped to that part of the engine. That means the horsepower required to pump the oil can be used instead to power the car. Each car starts with a roll cage built to NASCAR specifications. After years of aerodynamic scrutiny of the visible portions of the car, Hendrick Motorsports is testing new underbody configurations to improve handling and gain speed, according to Eddie Dickerson, director of chassis engineering.
5 We re always trying to make #24 the slickest car on the track, says crew chief Robbie Loomis. Having DuPont as sponsor of the #24 Monte Carlo puts us in a different relationship with our sponsor than most other teams, says Dickerson. Sponsors candy and burgers and such certainly are good products, but they won t make a car run faster. DuPont, on the other hand, brings us materials and technology. We didn t need to develop Vespel ; it was already there for us. We just needed to learn to apply it. Similarly, HMS mechanics learned to use DuPont TM Krytox performance lubricant to prevent the rubber/silicone boot on spark plug wires from adhering to the plug s ceramic insulator because of the intense heat generated under the hood. When a mechanic tried to remove the wire, Dickerson explains, the wiring assembly pulled apart. We discovered that by applying a small dab of Krytox inside the boot, we eliminated the problem because the Krytox easily stands up to the heat. Now Krytox is used on General Motors production cars to solve this same problem. Each Winston Cup team will use 60 to 80 tires Moving fluids around the #24 are lots of hoses and tubing of DuPont TM Teflon per race, including practice sessions. PTFE. HMS engineers have found that the strong, lightweight material is ideal for the very tight bends necessary to fit all the fluid lines into cramped spaces. The hoses are extruded in a convoluted configuration rather than a smooth bore to prevent collapsing in sharp-radius bends. Developing engine components is no small part of the HMS operation. Each year, the HMS engine department builds more than 700 engines for its own teams and for lease to a number other NASCAR competitors. As important, the engine department is an extension of the GM Motorsports technical program. Most recently, HMS played a key role in the development and testing of the new SB2 engine that powers all GM cars in NASCAR Winston Cup competition. DuPont Motorsports Network sponsors of #24 include Corian, Tyvek, Stainmaster, Nomex, and Sontara. We ve brought together a lot of talent electrical, mechanical, and chemical engineers, as well as specialists in metallurgy and combustion to build engines that are not only powerful, but durable, too, says Jim Wall, engineering group manager for Hendrick Engines. There s a careful balance between power and durability, which is why we re always seeking new materials that will last without sacrificing horsepower.
6 The department currently is working on a new configuration for a cylinder head. Wall and his team heavy users of computer-aided design and manufacturing systems will design, model, and test the part in the computer before any metal is ever shaped. We test stress and thermal loads in the computer so we re very close to the final part design before we make the first prototype. We give the race teams the basic tools, then they put them all together. The drivers do the final testing. It s incredible what drivers like Jeff can sense in a car he can feel a 5-horsepower difference in an engine. He s got extraordinary hand-eye Jeff Gordon s dashboard is set so instruments and track are directly in his field of coordination and a very sharp mind. He takes maximum advantage of the tools we give him. At Hendrick Motorsports, putting all the basic tools together involves the efforts of some 320 employees working in 400,000 square feet of building complex spread over 67 acres near Charlotte, North Carolina. Each of those 320 people is critical to the success of the Hendrick race teams, says Robbie Loomis, crew chief for Gordon. Nothing symbolizes this better than the pit crew on Sundays. They are so in tune with each other, they re almost like one person out there. That s the only way we can have stops of 14 and 15 seconds race after race. HMS was the first organization to field professional pit crews that train four to six hours during the week. Members are selected for their agility, experience playing team sports, and their will to win. And every crew member can use the services of a HMS fitness trainer to assure that they are in shape and race-ready. This reflects Rick Hendrick s attitude toward The #24 air dam is reinforced with Kevlar people, concludes Loomis. He has a knack for for strength without unwanted taking ordinary people and making them give 110 percent. He knows that, ultimately, it s people who win races. To learn more about Hendrick Motorsports and Jeff Gordon, go to or The red-tipped probe digitizes a cylinder head to ensure conformity with specifications.
7
Building and Maintaining A Successful Program
Building and Maintaining A Successful Program OVERVIEW! The Maintenance of:! 1.) An Efficient Assembly Process! 2.) A Beneficial Testing System! 3.) A Logical Transportation Schedule! 4.) All Mechanisms
More informationDINAN Signature Series M
DINAN Signature Series M6 2007-08 Performance Without SACRIFICE 4 Year / 50,000 Mile Warranty Contact a Dinan Representative or visit dinancars.com for information on the most extensive line of M6 products
More information16490 Lone Star Circle East Justin, Texas panozracingschool.com
16490 Lone Star Circle East Justin, Texas 76247 817-430-2102 panozracingschool.com TRACK DAYS @ What is a Track Day? A Track Day allows a licensed driver to bring his/her street car out to Texas Motor
More informationNote that lab reports are always double spaced, allowing the person reviewing your work to have room to write comments.
In this sample lab report, annotation will appear in a comment. The lab report itself will be in black. A version of this report without annotation is also available so you can see what a typical report
More informationSiemens PLM Software solutions enable Hendrick Motorsports to align with longstanding racing principles and support continuous improvement
Automotive and transportation Product Simcenter Business challenges Design, test and build a fleet of cars that conform to NASCAR rules Optimize current parts and assemblies for performance and reliability
More informationDESIGN BEHIND THE BIKE WHEELS
DESIGN BEHIND THE BIKE WHEELS INTRODUCTION Far from being a simple, round, spinning object, the component parts of a wheel combine to affect weight, aerodynamics and the overall performance of a bike.
More informationDuPont Performance Coatings Jeff Gordon Advertising Campaign Records
DuPont Performance Coatings Jeff Gordon Advertising Campaign Records 2293 Finding aid prepared by Jason Sylvestre in August 2006.. Last updated on March 04, 205. Manuscripts and Archives Department 992-2000
More informationFABRICATED PARTS. Wire Cloth. Expanded Metal. Perforated Metal. Sheet Metal. Sintered Wire Cloth. 160 Forenlius Avenue, Clifton, New Jersey
FABRICATED PARTS Expanded Metal Perforated Metal Sheet Metal 160 Forenlius Avenue, Clifton, New Jersey 07104-1844 Sintered Fabricated Parts A Key Player! The Newark Company has been supplying wire cloth
More informationExternally Convoluted. Internal mirror smooth finish. Collar. Swaged G-line fitting
SECTION:// 00:01 G-LINE HOSE & FITTINGS At the cutting edge of motorsport, a fraction of a second is the difference between winning and just taking part. You need the best. At Goodridge we have combined
More informationFlexible Metal Hose Products
Flexible Metal Hose Products Specialty Flexible Hose Solutions of Stainless Steel The AEROCOM Advantage Aerocom offers engineered solutions that address specific flexible piping challenges such as vibration,
More information20 Ton SD Shop Press Operating Instructions
20 Ton SD Shop Press Operating Instructions MODEL NO. 850SD Hazard Symbols Used in the Manuals This manual includes the hazard symbols defined below when the operations or maintenance job involves a potential
More informationUTTARAKHAND BOARD OF TECHNICAL EDUCATION, ROORKEE DATE WISE SCHEME SPECIAL BACK PAPER UPLOAD ON 29 SEP 2018 SUBJECT NAME CODE DATE TIME
DATE OF EXAM: FRIDAY 05 OCTOBER 2018 1 ADVANCE FOOD PRODUCTION OPERATION 373 Friday, 5 October 2018 10:00AM TO 12:30PM 2 ACCOMODATION MANAGEMENT 376 Friday, 5 October 2018 10:00AM TO 12:30PM 3 CHEMICAL
More informationJEFF GORDON BACK IN BAY AREA FOR THE DODGE/SAVE MART 350 AT INFINEON RACEWAY ON SUNDAY, JUNE 22, 2003
JEFF GORDON BACK IN BAY AREA FOR THE DODGE/SAVE MART 350 AT INFINEON RACEWAY ON SUNDAY, JUNE 22, 2003 Vallejo native Jeff Gordon, driver of the No. 24 DuPont Chevrolet on the NASCAR Winston Cup circuit,
More informationFIRST SENSE OF BALANCE FIRST SENSE OF FUN FIRST SENSE OF ADVENTURE
FIRST SENSE OF BALANCE FIRST SENSE OF FUN FIRST SENSE OF ADVENTURE A diligent effort to amalgamate a lightweight frame, functionality, durability, safety and visual allure with a competitive price point
More informationTeam Racing Sponsorship Proposal
2011 Team Racing Sponsorship Proposal Our desire... Becoming a NASCAR team sponsor is a big step for any company, regardless of size or budget. Faith Motorsports takes great pride in making sure each sponsor
More informationFluid Dispensing Systems H O S E R E E L S H O S E S HOSE REELS
Fluid Dispensing Systems H O S E R E E L S H O S E S HOSE REELS HOSE REELS SIGNATURE SERIES H O S E S R E E L S FEATURES & BENEFITS Eight position locking precision die cast latch mechanism, with secure
More informationTHERE IS ONLY ONE FirstBIKE! FIRST SENSE OF BALANCE FIRST SENSE OF FUN FIRST SENSE OF ADVENTURE
THERE IS ONLY ONE FirstBIKE! FIRST SENSE OF BALANCE FIRST SENSE OF FUN FIRST SENSE OF ADVENTURE THE FirstBIKE STORY ONE MAN, ONE MISSION; TWO WHEELS Ralf Coerschulte, an avid German cyclist, product designer,
More informationMichigan Struggles. Team Newsletter. Volume 17. Issue 5. FSAE Michigan Competition Recap. A Letter to Our Sponsors and Supporters
Volume 17 Issue 5 Competition Recap Issue Team Newsletter Michigan Struggles Redeemed in Lincoln A rough FSAE Michigan competition for the Clemson Tigers meant the pressure was on for CUFSAE at their first
More informationBringing Fuel Injection to NASCAR in 2012
Bringing Fuel Injection to NASCAR in 2012 freescale.com About Freescale Semiconductor Freescale Semiconductor is a global leader in embedded processing solutions for the automotive, consumer, industrial
More informationWorkshop Compressors CLASSIC Series
www.kaeser.com Workshop Compressors CLASSIC Series Displacement: 210 to 40 l/min Pressure: 10 bar What do you expect from your Classic workshop compressor? Quality results can be achieved only by using
More informationTotal Pressure Regulator Solutions.
Total Pressure Regulator Solutions www.pressure-tech.com Working with customers to support their exact needs A pressure regulator is a critical component in any fluid control system. At Pressure Tech,
More informationA hose layline contains important information for specifying the replacement assembly: manufacturer, hose trade name, working pressure and hose ID.
CONTENTS Introduction Pressure Pressure Drop Temperature Rating Bend Radius Conclusion Additional Information SIDEBAR: Understanding Hydraulic Hose Reinforcement INTRODUCTION Hydraulic hose has a finite
More informationBrian Escobar Us or Visit our Website: Bobby Dezarov Richard Birkofer
Brian Escobar 760.641.0920 Email Us or Visit our Website: Bobby Dezarov 760.333.2334 BSetSponsorships@Gmail.com Richard Birkofer 760.567.1670 www.bsetsponsorships.com ASA racing is one of the fastest growing
More informationcatalyst The Art of Progress
catalyst v2 The Art of Progress i n s p i r e d b y n a t u r e / / d r i v e n b y t h e e l e m e n t s The Art of Progress The Catalyst V1 has been a great success but the Ozone design team is never
More informationPERFORMANCE FREERIDE INSPIRED BY NATURE // DRIVEN BY THE ELEMENTS
PERFORMANCE FREERIDE code V1 performance freeride range of use All Round Free Ride Performance 0 Medium Rocker and Medium Flex Progressive Outline with Amazing Control Intermediate to Advanced Free Riders
More informationFood Service Industry Hose
Food Service Industry Hose Intro... -2 Clearforce - NR... -3 Clearforce - R... -4 Aquaforce... -5 rey Food Transfer... -6 Lion Food Transfer... -7 Dry Bulk Food Discharge... -8 EATON Industrial Hose and
More informationPNEU-THANE K5090, K5094, K5096 Series
REINFORCED AIR & WATER HOSE An extremely lightweight, tough, flexible pneumatic air tool hose that is suitable for a wide range of industrial and construction applications. Tube Clear ether-based polyurethane.
More informationThe pinnacle of car racing is Formula One, and Red Bull
Success in Formula One requires an enormous amount of coordination. Collaboration between engineering, IT and manufacturing allows the team to innovate rapidly, introducing new updates between every race.
More informationBREATHING AIR FOR LIFE. DRÄGER COMPRESSORS. Cra 28 No. 71b - 25 / / /
BREATHING AIR FOR LIFE. DRÄGER COMPRESSORS DETECTION PERSONAL PROTECTION DIVING TECHNOLOGY SYSTEM TECHNOLOGY SERVICES Dräger Safety compressors a breath of fresh air. BREATHING IS LIFE. FOR MORE THAN A
More informationSPH 4C Unit 4 Hydraulics and Pneumatic Systems
SPH 4C Unit 4 Hydraulics and Pneumatic Systems Properties of Fluids and Pressure Learning Goal: I can explain the properties of fluids and identify associated units. Definitions: Fluid: A substance that
More informationOVERVIEW H Y D R A U L I C 18
H Y D R A U L I C 18 H O S E F R O M G O O D Y E A R ONE SOURCE SYSTEM SOLUTION ONE source Goodyear carries its commitment of quality, precision-engineered, industrial hose assembly products and crimp
More informationFACTORY TOUR EXPERIENCE
FACTORY TOUR EXPERIENCE 2017 WELCOME TO OUR HOME A Formula One Factory is a technological marvel. It sets performance benchmarks not just for motorsport but for industry at large. And we d like to invite
More informationScience 8 Chapter 9 Section 1
Science 8 Chapter 9 Section 1 Forces and Buoyancy (pp. 334-347) Forces Force: anything that causes a change in the motion of an object; a push or pull on an object balanced forces: the condition in which
More information75 Ton SD Shop Press Operating Instructions
75 Ton SD Shop Press Operating Instructions MODEL NO. 856SD Hazard Symbols Used in the Manuals This manual includes the hazard symbols defined below when the operations or maintenance job involves a potential
More information2018 Jeepspeed Outlaws. Modified Class 3700 Rules. * Plus new Jeepspeed Trophy Open Class 4700 Rules.
2018 Jeepspeed Outlaws. Modified Class 3700 Rules. * Plus new Jeepspeed Trophy Open Class 4700 Rules. Jeepspeed is a registered trademark. Auto racing is a dangerous sport and may result in injury, or
More informationINSTRUCTIONS & MAINTENANCE SHEET PORTABLE HYDRAULIC PUNCHING HEAD PH045
INSTRUCTIONS & MAINTENANCE SHEET PORTABLE HYDRAULIC PUNCHING HEAD PH045 V05.2013 DECLARATION OF CONFORMITY 2 1. TECHNICAL CHARACTERISTICS Maximum punching capacity: Min / Max. hole diameter: Max. yield
More informationINSTRUMENTATION TUBING
INSTRUMENTATION TUBING Design & Installation ISSUE 2013.1 TUNGUM TUBING DESIGN & INSTALLATION Introduction Design & installation advice: Tube bore size for hydraulic circuits Calculating tube wall thickness
More informationA force can be measured using an instrument called a force meter (sometimes called a newton meter or spring balance)
Forces A force is any kind of PUSH or PULL. The unit of force is the newton (N). A force can be measured using an instrument called a force meter (sometimes called a newton meter or spring balance) Using
More informationTRACTION CONTROL: BY BOB APPLEGET
Bob Appleget TRACTION CONTROL: I n the March 2005 issue of Dirt Late Model Magazine, we ran a cover story entitled Traction Control What is the big deal with this little thing? The story was very popular
More informationSwivel, harness, PVC, bearing, tow strap, bungee (0.6lbs)
Testing Proof 1. Weight (The total weight of the device should be less than 70lbs) A bathroom scale has been used to measure the weight of the device. A.J. was weighed on the scale (134.8lbs) before holding
More information**INJURY OR DEATH MAY OCCUR IF THESE INSTRUCTIONS ARE NOT FOLLOWED**
**INJURY OR DEATH MAY OCCUR IF THESE INSTRUCTIONS ARE NOT FOLLOWED** 4 MIN STERNUM STRAP MUST SIT AT LEAST 4 BELOW YOUR NECKLINE. ALL LATCHES MUST BE SECURE. HARNESS, SHOULDER AND LAP STRAPS MUST BE TIGHTENED
More informationElectric and Natural Gas Safety Trainer s Guide
Worker Safety Electric and Natural Gas Safety Trainer s Guide Contents INTRODUCTION... 2 SECTION ONE: KNOW YOUR AUDIENCE... 2 SECTION TWO: UTILITY BASICS... 2 What Is Electricity?... 2 The Electricity
More informationCylinder Tilt Saddle Instruction Manual
Cylinder Tilt Saddle Instruction Manual MODELS: SDT05, SDT10, SDT15, SDT25 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 - Fax: 816-448-2142 E-mail: sales@bvahydraulics.com
More informationMix and Flow of Matter Grade 8 Unit 1 Test
Mix and Flow of Matter Grade 8 Unit 1 Test Student Class 1. All fluids flow and can be observed by many of the characteristics below. Which of these characteristics would you use to observe a gas flowing?
More informationTEAM GRAPHICS CORPORATE BRANDING FORTUNE 500 CLIENTS ORIGINAL ART CUSTOM GUITARS SPECIAL PROMOTIONS SPEAKING ENGAGEMENTS HOSPITALITY APPEARANCES
AWARD-WINNING DESIGNS CORPORATE BRANDING FORTUNE 500 CLIENTS ORIGINAL ART CUSTOM GUITARS TEAM GRAPHICS SPECIAL PROMOTIONS SPEAKING ENGAGEMENTS HOSPITALITY APPEARANCES Sam Bass, the first Officially Licensed
More informationPress Release. Friction Stir Welding: Grenzebach extends its portfolio
Friction Stir Welding: Grenzebach extends its portfolio Higher dynamics, higher welding speeds, lower process forces and even higher quality welding seams and welding surfaces: at the Düsseldorf Schweissen
More informationKAITE HOSE Rev.01. High pressure hygienic hose for the food industry. spray nozzle experts for the processing industry
KAITE HOSE Rev.01 High pressure hygienic hose for the food industry. spray nozzle experts for the processing industry KAITE LTD for the life of your plant 2 KAITE HOSE KAITE HOSE is specifically designed
More informationDesign. Pompetravaini-NSB API SB Liquid Ring Compressor for Gas Processing. Working Principle
SB Pompetravaini-NSB API SB Liquid Ring Compressor for Gas Processing A family of API liquid ring compressors has been developed and has been in the market for nearly a decade, they are specifically made
More informationLEVEL 1 SKILL DEVELOPMENT MANUAL
LEVEL 1 SKILL DEVELOPMENT MANUAL Program Overview A Publication Of The USA Hockey Coaching Education Program The USA Hockey Coaching Education Program is Presented By Table of Contents Foreword...2 Introduction...3
More informationNew Ford Technical Support Center to Increase Vehicle Performance On- and Off-Track
FORD MEDIA CENTER New Ford Technical Support Center to Increase Vehicle Performance On- and Off-Track Ford reinforces commitment to racing and performance car development with announcement of new Ford
More informationCryogenic Liquid Ultimate Liquid Cylinder Hose
Cryogenic Liquid Ultimate Liquid Cylinder Hose Flexible Components brand liquid cylinder hose is considered the highest quality liquid cylinder hose on the market. It effectively transfers cryogenic liquids
More informationowner s manual 2012 yeti arc
owner s manual 2012 yeti arc YETI CYCLES 600 Corporate Circle, Unit D Golden, CO 80401 888.576.9384 www.yeticycles.com Table of Contents Brand Overview 06 Frame Features 08 Geometery 10 Maintenance Schedule
More informationICE PROTECTION - PROPELLER
ICE PROTECTION - PROPELLER. DESCRIPTION This section describes the portion of the Ice Protection System pertaining to the propeller. This includes the slinger ring and the de-icing propeller boots. Grooved
More informationSanta Fe Cycles Assembly Guide Introduction
Santa Fe Cycles Assembly Guide Introduction Congratulations on your purchase of your new Santa Fe bicycle. You have purchased a bicycle that has many features and qualities. Please take a few minutes and
More informationL-708 / L-708LD Bore Alignment System
L-708 / L-708LD Bore Alignment System Aligning Bores is Now Faster and Easier Than Ever Geometric Alignment Laser Systems L-708 / L-708LD Laser Bore Alignment System The Leader in Laser Bore Alignment
More informationI N N O V A T I O N C O N T I N U E S... International Patent Filed in 45 Leading Countries
I N N O V A T I O N C O N T I N U E S... Quick Check International Patent Filed in 45 Leading Countries World's First Single Piece Multi-Function Check Standard for Calibration or Verification of Various
More informationWheels lie at the heart of nearly every material handling
W HEELS lie at the heart of nearly every material handling system. Improperly specified or poor quality wheels can wreak havoc on the simplest task or a highly complicated system. Fast paced technology
More informationTire Inflation Cage Kit For servicing only single piece automotive, and most light truck tire/wheel assemblies
Tire Inflation Cage Kit 85608214 For servicing only single piece automotive, and most light truck tire/wheel assemblies This is a supplement to your operating manual and covers the setup and use of the
More informationSANTANA STOWAWAY TANDEM WITH AIRLINER SAFECASE AND FTS FOAM TRAY SYSTEM ASSEMBLY AND DISASSEMBLY
SANTANA STOWAWAY TANDEM WITH AIRLINER SAFECASE AND FTS FOAM TRAY SYSTEM ASSEMBLY AND DISASSEMBLY Congratulations! You are now the proud owner of the world s most travel-ready, performance tandem. The following
More informationRoger Williams Racing 32
2011 Motorsports Marketing Williams Racing 5365 N. Co. Rd. 700 W. St Paul, Indiana 47272 765-525-4825 wpespeedshop@tds.net Introduction My name is Roger Williams. I own and operate a performance race engine
More informationWorkshop Compressors CLASSIC Series
www.kaeser.com Workshop Compressors CLASSIC Series Displacement: 210 to 40 l/min Pressure: 10 bar What do you expect from your CLASSIC workshop compressor? Quality results can be achieved only by using
More informationSTEWART-HAAS RACING Stewart-Haas Racing is the title-winning NASCAR Sprint Cup Series team co-owned by three-time Sprint Cup champion Tony Stewart
STEWART-HAAS RACING Stewart-Haas Racing is the title-winning NASCAR Sprint Cup Series team co-owned by three-time Sprint Cup champion Tony Stewart and Gene Haas. The team fields three entries in the elite
More informationCut Protection and Abrasion Sleeves
52 02.4 Cut Protection and Cut Protection Sleeves 54-65 secutex 56-59 NoCut sleeve 58-61 62-63 Buffer Products 64-65 53 02.4 CUT PROTECTION AND ABRASION SLEEVES Cut Protection Sleeves secutex NoCut sleeve
More informationHow To: Install a 1 Body Lift using Hockey Pucks A CFans Members Mod Project by grandmastrblastr
How To: Install a 1 Body Lift using Hockey Pucks A CFans Members Mod Project by grandmastrblastr Skill Level: Easy Disclaimer: Please use caution and seek professional assistance when necessary. ColoradoFans.com,
More informationTHE BRAND THAT STARTED IT ALL.
THE BRAND THAT STARTED IT ALL. AUSTIN DILLON JEFF GORDON TY DILLON DELIVERING EVERYTHING THAT THE SPORT HAS TO OFFER. PRODUCT HIGHLIGHTS NEW FOR 2014: ONE on-card autograph and one memorabilia card in
More informationINSTRUCTION MANUAL. Demountable Ice Bath Pools
INSTRUCTION MANUAL Demountable Ice Bath Pools Your icool Demountable Ice Bath Pool is designed to compliment and enhance the many scientifically proven benefits of regular use of the icool Ice Bath Therapy
More informationHOSE & FLEXIBLE TUBING
http://southwest.swagelok.com HOSE & FLEXIBLE TUBING PROVIDED BY SWAGELOK SOUTHWEST SWAGELOK SOUTHWEST Swagelok Hose and Flexible Tubing Metal Hose & Tubing FX Series Metal Hose FM Series Metal Hose FJ
More informationReady-To-Race. 1/16 Scale Brushless Officially Licensed Race Replica. Battery Pack and Charger Included
1/16 Scale Brushless Officially Licensed Race Replica * Velineon Brushless Power System Powerful High-Output 2.4GHz Radio System with Traxxas Link Battery Pack and Charger Included *with optional pinion
More informationPersonal Protective Equipment Policy
Summary of the Legal requirements: Personal Protective Equipment Policy Personal Protective Equipment should only be used as a last resort or as a short term emergency measure where other control measures
More informationINTERLOCKED METAL HOSE
INTERLOCKED METAL HOSE HOSE FUNDAMENTALS Penflex interlocked metal hoses are made for a variety of specialized industrial applications and are available in a wide range of metals, styles and sizes. Interlocked
More informationDECREE TECH FEATURES FELT LONG, LOW, SLACK GEOMETRY
TECH FEATURES FELT DECREE In October 2015, Felt Bicycles introduced an entirely new trail bike into its family: the Decree. Through many iterations of development and design, plus demanding testing and
More informationHow to Replace Ball Joints
How to Replace Ball Joints This is a big write up with a lot of pictures but I thought it would help some people. I know a lot of people have been having problems with ball joints so when I did mine I
More informationVacuum Bagging Wings Instruction Manual Purdue University
Vacuum Bagging Wings Instruction Manual Purdue University Note: Do not leave the vacuum pump running unattended! Revision: Original Release 10/31/15 Vacuum bagged wings are quick to build, light weight,
More information"HAND, WRIST AND FINGER SAFETY"
PRESENTER'S GUIDE "HAND, WRIST AND FINGER SAFETY" Part of the "SAFETY MEETING KIT" Series Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM POINTS OUTLINE OF MAJOR PROGRAM
More informationNOW IS THE PERFECT TIME TO BE AN IRWIN CYCLING AUTHORIZED DISTRIBUTOR. FIND OUT WHY!
NOW IS THE PERFECT TIME TO BE AN IRWIN CYCLING AUTHORIZED DISTRIBUTOR. FIND OUT WHY! EXPERIENCE REAL INNOVATION WELCOME TO IRWIN CYCLING It has always been IRWIN Cycling s mission to deliver technologically
More informationFLEXIBLE SHAFTING (Wet & Dry)
TM-5 April 5, 2004 Elliott offers a complete line of precision tube tools, including: tube expanders Boiler Expanders Heat Exchanger Expanders Condenser Expanders Refinery Expanders tube rolling motors
More informationADVENTURES WITH. Both of my grandfathers fished, my dad fished, and. creating unique handles for custom rods. 22 RodMaker
From RodMaker Magazine Volume 7 Issue #4 WOOD creating unique handles for custom rods ADVENTURES WITH story by Ray Jergensen photos by Les Jergensen 22 RodMaker Both of my grandfathers fished, my dad fished,
More informationCo-Motion Co-Pilot Bicycles for travel
Revised October 2014 Co-Motion Co-Pilot Bicycles for travel Packing and travel instructions Eugene Oregon USA Toll free 1-866-282-6336 www.co-motion.com Congratulations! A Co-Motion Co-Pilot is a great
More informationWet, hot, and cold conditions
The issue of foot protection in the workplace can be a frustrating one, with unique needs for different environments, and an overwhelmingly large selection of footwear on the market. To make things even
More informationMASTER TRUING STAND TS-3. Optional Dial indicator set with brackets Dial indicator bracket set only
MASTER TRUING STAND TS-3 3 2 1 3 8 9 4 10 7 6 5 12 13 Optional 1555-1 Dial indicator set with brackets 1556-1 Dial indicator bracket set only 49 11 16 14 15 48 32 31 37 38 20 19 17 18 34 39 21 36 22 33
More informationRebuilding & Tuning the Olds 455/403
Rebuilding & Tuning the Olds 455/403 Improved Power, Torque and Reliability Joe Mondello Mondello Technical Center Mondello Performance Products Outline Introduction Advantages of Rebuilding Usual rebuilding
More informationJEFFREY EARNHARDT. Terry Blount, ESPN
JEFFREY EARNHARDT It s In The Genes! With Earnhardt Nation Waiting, It Will Be In The Best Interest Of All NASCAR Fans To Remember The Name Jeffrey Earnhardt. Terry Blount, ESPN FAST FACTS Jeffrey Earnhardt
More informationQUATRO INTERNATIONAL 2010
QUATRO INTERNATIONAL 2010 This new and unique 2010 Quatro line offers our latest in leading edge designs for ultimate performance. We have the freedom to offer a versatile set of boards that perform in
More informationSession Topics. Industrial Hygiene from an OSHA Perspective. Health Hazards in Shops. Labeling Example 1/27/2014. Shop Safety: Health & Ventilation
Session Topics Shop Safety: Health & Ventilation UW Extension Webinar January 28, 2014 Mary Bauer CIH, CSP Compliance Assistance Specialist Eau Claire, WI 54701 715-832-9019 1. Organization walk paths,
More informationA SPONSORSHIP PROPOSAL
SEEGER RACING A SPONSORSHIP PROPOSAL Thank you for taking the time to review our proposal and for considering our race team for sponsorship. I know you have many options in many markets when it comes to
More informationAIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES
Series AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES Standard Air Chucks 374 Flow-Thru Air Chucks 375 Standard Pencil Tire Gauges 376 Dual Foot Tire Gauges 377 Dial Tire Gauges 378 Digital Tire Gauges 379
More informationToppe Dominates Opening Round at Sebring
Toppe Dominates Opening Round at Sebring SEBRING, Fla. (March 17, 2016) Clark Toppe is the leading returning driver in the Mazda Prototype Lites Presented by Cooper Tires series this season, and he reinforced
More informationDiscover why Zamboni is the overwhelming choice for ice rink operators throughout the world.
525 Discover why Zamboni is the overwhelming choice for ice rink operators throughout the world. The 525 is simple to drive and very easy to operate. The ergonomically designed operator s compartment has
More informationCanadian Tire Motorsport Park July 6-9, 2017 Rounds 7-8 and 9
F4 US EVENT SCHEDULE Wednesday, July 5, 2017 1:00 pm 5:00 pm F4US Competitor Load-in 1:00 pm 4:00 pm F4US Registration Main Gate Registration Building 5:15 pm 6:45 PM Track Walk Walk and Bicycles Only
More informationG l e a s o n I n t e r n a t i o n a l R a c e w a y O v e r a l l R u l e s & R e g u l a t i o n s
All decisions made by track officials are final. G l e a s o n I n t e r n a t i o n a l R a c e w a y O v e r a l l R u l e s & R e g u l a t i o n s Entries will be accepted until one hour before the
More informationRules for races 2017
Rules for races 2017 1. RULES INTERPRETATION An official designated by the federation is the person to apply these rules. In case of a disagreement, the committee in charge of complaints will make the
More informationCongratulations on your purchase of a JC Series Performer trike! The Performer JC Series is designed for everything from touring to commuting and
Congratulations on your purchase of a JC Series Performer trike! The Performer JC Series is designed for everything from touring to commuting and shopping in the city. The JC Series frames are made of
More informationSponsorship Opportunities. NASCAR Camping World Truck Series
Sponsorship Opportunities NASCAR Camping World Truck Series 2013 Overview Who are we? How can you benefit from marketing with us? Market Demographics Event Details Media Coverage Event Sponsors Available
More informationDIT UNIVERSITY. Dehradun
DIT UNIVERSITY Dehradun COURSE STRUCTURE OF B.TECH. Mechanical Engineering with specialization in Automobile Engineering Batch 2016 20 Year: 1 st L T P Group A Class Assign Quizzes Record Vivavoce I Test
More informationLOW DOLLAR WHEELER Ian and Chris show you how to get the most bang for your off-road Jeep buck.
12 LOW DOLLAR WHEELER Ian and Chris show you how to get the most bang for your off-road Jeep buck. 20... MyPowerBlock PowerBlock readers show-off their favorite rides. 32... PowerBlock Calendar Keep track
More information[Title of the course]
As with non-metallic raceway, Hubbell metal raceway is available in a variety of styles. There are 13 metal raceway profiles 8 painted and 5 aluminum for customers to choose from! ALL Hubbell painted metal
More informationMotorola Industrial Products-The Benchmark of Ruggedness
Motorola Industrial Products-The Benchmark of Ruggedness Passive Tags Passive tags use energy supplied by the reader and do not require battery power to maintain memory. These tags provide 40 user bits
More informationGrader Note: It is recommended that you read the Supporting Information page before you read this factsheet.
Grader Note: It is recommended that you read the Supporting Information page before you read this factsheet. Preparation for work (Preparation) Graders are part of a group of specialist machines that are
More informationSection 2 Safety, Tools and Equipment, Shop Practices Unit 4 General Safety Practices. Unit Objectives. Pressure Vessels and Piping (1 of 2)
Section 2 Safety, Tools and Equipment, Shop Practices Unit 4 General Safety Practices Unit Objectives After studying this chapter, you should be able to: Describe proper procedures for working with pressurized
More informationPush-Lok 801/804/821/836 Hose and Fittings
Push-Lok 801/804/821/836 Hose and Fittings Parker Push-Lok The Most Complete Line of Premium-Quality, Low-Pressure Hose and Fittings Push-Lok Plus 801 hose provides the quick and easy assembly/ disassembly
More information