N304-EX. Air Cylinder. NCA1 Series. NFPA Industrial Interchangeable Pneumatic Cylinders Medium Duty 5 to 8 Heavy Duty 1.5 to 14
|
|
|
- Ashlynn Henry
- 5 years ago
- Views:
Transcription
1 Air Cylinder NCA1 Series N304-EX NFPA Industrial Interchangeable Pneumatic Cylinders Medium Duty 5 to 8 Heavy Duty 1.5 to 14
2 PNEUMATIC CYLINDERS SERIES NCA1 - TABLE OF CONTENTS Description Page No Specifications Material / Technical 1 How To Order NCA1 - ø1.5 to ø14 Heavy Duty 2 NCA1 - ø5 to ø8 Medium Duty 3 Dimensions ø1.5 - ø6 MF1 w/front Rectangular Flange 4 ø1.5 - ø6 MF2 w/rear Rectangular Flange 4 ø1.5 - ø6 MF5 w/front Square Flange 5 ø1.5 - ø6 MF6 w/rear Square Flange 5 ø1.5 - ø6 MP1 w/double Rear Clevis 6 ø1.5 - ø6 MP2 w/double Detachable Rear Clevis 6 ø1.5 - ø6 MP3 w/cap Fixed Eye 7 ø1.5 - ø6 MP4 w/single Detachable Rear Clevis 7 ø1.5 - ø6 MS1 w/foot Mount 8 ø1.5 - ø6 MS2 w/side Lug 8 ø1.5 - ø6 MS3 w/centerlug 9 ø1.5 - ø6 MS4 w/side Tapped 9 ø1.5 - ø6 MS7 w/front Lug Mount 10 ø1.5 - ø6 MT1 w/head Trunnion 10 ø1.5 - ø6 MT2 w/rear Trunnion 11 ø1.5 - ø6 MT4 w/center Trunnion 11 ø1.5 - ø6 MX1 w/extended Tie-Rods/Both Ends 12 ø1.5 - ø6 MX2 w/extended Tie-Rods/Cap 12 ø1.5 - ø6 MX3 w/extended Tie-Rods/Head 13 ø8 - ø14 ME3 w/head Square Mount 13 ø8 - ø14 ME4 w/cap Square Mount 14 ø8 - ø14 MP1 w/double Rear Clevis 14 ø8 - ø14 MP2 w/double Detachable Rear Clevis 15 ø8 - ø14 MP3 w/cap Fixed Eye 15 ø8 - ø14 MP4 w/single Detachable Rear Clevis 15 ø8 - ø14 MS1 w/foot Mount 16 ø8 - ø14 MS2 w/side Lug 16 ø8 - ø14 MS3 w/center line Lug 16 ø8 - ø14 MS4 w/side Tapped 17 ø8 - ø14 MS7 w/front Lug Mount 17 ø8 - ø14 MT1 w/head Trunnion 17 ø8 - ø14 MT2 w/rear Trunnion 18 ø8 - ø14 MT4 w/center Trunnion 18 ø8 - ø14 MX1/MX2/MX3 w/extended Tie-Rods 19 ø1.5 - ø6 NCA1-W Double Rod 19 ø8 - ø14 NCA1-W Double Rod 19 Engineering Specifications Push Stroke 20 Pull Stroke 20 Oversize Piston Rods 20 Stroke Factors 21 Stop Tube 21 Options Auto Switch Options 22 Table of Thread Form Codes / XA Options 22 Option XC3 - Port and Cushion Location 23 Construction / Parts List / Seal Kit 23 Accessories Eye Brackets, Clevis Brackets, Rod Clevises, Rod Eyes, Pin, 24 Alignment Couplers, Rod Jam Nut
3 Air Cylinder Air Cylinder Series NCA1-EX M ATERIAL S PECIFICATIONS MEDIUM DUTY XTAT Bore Size Barrel - Aluminum Std Std Std Composite Fiber Opt Opt Opt Head/Cap - Aluminum Std Std N/A Head/Cap - Steel N/A N/A Std Piston - Aluminum Std Std Std Gland Bushing Bronze Material Note Material Specifications for above: Aluminum; 6061-T6, Steel; ASTM A36, Stainless Steel; 316. T ECHNICAL S PECIFICATIONS Fluid Air / Hydraulic* (250psi non-shock) Lubrication Non Lube Max operating Pressure 250 PSI Min Operating Pressure 5 PSI Ambient & Fluid Temp 40~140ºF / 5~60ºC Please note for Hydraulic Service please order the H option as denoted in the How to Order breakdown on pgs 2 & 3 HEAVY DUTY XTST Bore Size 1.5~ Barrel - Steel Std Std Std Std Std Std Std Composite Fiber Opt Opt Opt Opt Opt Opt Opt Head/Cap - Steel Std Std Std Std Std Std Std Piston - Aluminum Std Std Std Std N/A N/A N/A Piston - Steel N/A N/A N/A N/A Std Std Std Gland Bushing Bronze Material Note Material Specifications for above: Aluminum; 6061-T6, Steel; ASTM A36, Stainless Steel; 316, N/A - Not Available; please contact SMC Customer Service OPT - Optional; see How to Order XTSS CORROSION RESISTANT Barrel Stainless Steel Composite Tube Optional Head/Cap Stainless Steel Piston Aluminum Tie Rods Stainless Steel Gland Bushing Delrin Note Material Specifications for above: Aluminum; 6061-T6, Stainless Steel; 316, T IE R OD M ATERIAL 1020 Carbon Steel - Medium Duty: Zinc Coated 1 C USHIONS An industry proven fully adjustable cushion is a standard option. P ISTON PACKINGS Nitrile type U-cups are standard. Bronze filled Teflon wear bands are also standard. G LAND B USHING CYLINDER NOT AS SHOWN Cartridge Type SAE 660 bronze bushing. Removable without dismantling of cylinder for easy replacement of seals. R OD S EALS & WIPERS Rod seals are Nitrile U-cups with Teflon backup rings. Polyurethane wipers are standard. Other wiper materials are available as standard options depending on service application. M OUNTINGS Full range of NFPA accessories. (Please see Page 24) Special mountings available on request. P ISTON R OD High Strength 1045 Carbon Steel, Hard Chrome-Plated and Ground is Standard for the XTST Heavy Duty Series. The Corrosion-Resistant Series (XTSS) comes complete with a 316 Chrome-Plated Stainless Steel Piston Rod.
4 Air Cylinder S ERIES NCA1 HEAVY D UTY P NEUMATIC C YLINDERS B ORE S IZES 1.5 ~ 14 Steel and Stainless Steel Construction Replaceable Rod Gland Design Auto Switch Sensing Option (Stainless and Composite Tube Only) Hydraulic Service / 250PSI Non Shock (H Option) Non Rotating Piston Rod & Through Hole Rod Types Available Full Range of NFPA Interchangeable Mounting Configurations Mounting Dimensions are in accordance with ANSI/(NFPA) T3.6.7 R2-1996, Fluid Power Systems and products - Square Head Industrial Cylinders - Mounting Dimensions. HOW TO O RDER A UTO S WITCH - Standard D Auto Switch capable (Stainless and Composite tube only) S TYLE - Standard Cylinder W Double Rod (Please see Page 19 for Mounting Information) K Non-rotating Piston Rod (5 to 14 ø) M OUNTING / SINGLE R OD O NLY EA ME3 - Head Square Mount (8 to 14 ø) EB ME4 - Cap Square Mount (8 to 14 ø) F MF1 - Front Flange (1.5 to 6 ø) G MF2 - Rear Flange (1.5 to 6 ø) M N X D E C L S O R P U A1 MF5 - Front Flange (1.5 to 6 ø) MF6 - Rear Flange (1.5 to 6 ø) MP1 - Double Rear Clevis (1.5 to 14 ø) MP2 - Double Detachable Rear Clevis/Female (1.5 to 14 ø) MP3 - Cap Fixed Eye (1.5 to 14 ø) MP4 - Single Detachable Rear Clevis/Male (1.5 to 14 ø) MS1 - Foot Mount (1.5 to 14 ø) MS2 - Side Lug (1.5 to 14 ø) MS3 - Centerline Lug (1.5 to 14 ø) MS4 - Side-Tapped (1.5 to 14 ø) MS7 - Front Lug Mount (1.5 to 14 ø) MT1 - Rod End Trunnion (1.5 to 14 ø) J MT2 - Cap Trunnion ( ø) T MT4 - Center Trunnion (1.5 to 14 ø) *See below B MX0 - Basic/No Mount (1.5 to 14 ø) BA MX1 - Extended Tie-Rods; Head/Cap (1.5 to 14 ø) BB MX2 - Extended Tie-Rods; Cap (1.5 to 14 ø) BC MX3 - Extended Tie-Rods; Head (1.5 to 14 ø) B ORE S IZE NC How To Order MT4 With Non Standard XI Dimension NCA1 T - - X46US (XI = Total Inches) T Specify XI Dimension in inches Construction Type S TYLE - Pneumatic H Hydraulic S TD. ROD 5/8 5/8 5/ /8 1-3/8 1-3/ /2 Ø S TD. ROD 7/ / / /4-16 3/4-16 3/ / / /8-12 Up to 32 Bore available Please contact SMC Customer Service R EFER TO PAGE 22 FOR O PTIONAL R OD T HREADS T HREAD S TANDARD S TROKE Inches Example: 04 = 4 Stroke S TROKE Hundredths Of An Inch Example: 25 = 0.25 (1/4) Inch Stroke X R OD B OOT - Without Boot K Neoprene Boot T O PTIONS A Special Rod Thread (See Page 22) B5 Oversized Rod (See Chart below) B6 High Temperature * C3 Port and Cushion Location (see Page 23) C6 Stainless Steel Piston Rod (Std. on XTSS series) C8 Adjustable Stroke Extended Piston Rod * C9 Adjustable Stroke Return Piston Rod * C10 Dual Operation/Double Piston Rod * C11 Dual Operation/Single Piston Rod * C12 Tandem Cylinder* * (Contact SMC Customer Service) N O O F S WITCHES - 2 Pieces S 1 Piece n Number 0f Switches A UTO S WITCH For Switch information for steel tube please contact SMC customer service. See Pg 22 for auto switch options when using composite or stainless steel tube. A IR C USHION -...Both Ends N...None H...Cap End R...Rod End *Note: Non Adjustable Cushions are available on units above 4 Bore Please Consult SMC Customer Service **Note: Cushions not recommended for Strokes below 3 O P T I O N O VERSIZED R OD - XB5 OPTION When ordering an oversized rod, please order the following way to represent the rod size required. XB5 C ONSTRUCTION T YPE (PLEASE SEE PAGE 1 FOR CONSTRUCTION DETAILS) ST Steel Construction (1.5~14 ø) SS All Stainless Steel (1.5~14 ø) SCT Steel w/ Composite Tube ( ø) SSCT... Stainless Steel w/ Composite Tube ( ø) E 1 G 1 3/8 H 1 3/4 J 2 K 2 1/2 L 3 M 3 1/2 Z Please consult SMC Customer Service for larger sizes. 2
5 Air Cylinder SERIES NCA1 MEDIUM DUTY LARGE BORE PNEUMATIC CYLINDERS B ORE S IZES 5 ~ 8 Aluminum Construction Replaceable Rod Gland Design Auto Switch Capable Hydraulic Service / 250PSI Non-Shock (H Option) Full Range of NFPA Interchangeable Mounting Configurations Mounting Dimensions are in accordance with ANSI/(NFPA) T3.6.7 R2-1996, Fluid Power Systems and products - Square Head Industrial Cylinders - Mounting Dimension HOW TO O RDER A UTO S WITCH - Standard D Auto Switch capable NC M OUNTING / SINGLE R OD O NLY EA EB F G M N X D E C L S O R P U J T B BA BB BC A1 S TYLE - Standard W Double Rod (Please see Page 19 for Mounting Information) K Non-Rotating Piston Rod ME3 - Head Square Mount (8 only) ME4 - Cap Square Mount (8 only) MF1 - Front Flange (5 to 6 ø) MF2 - Rear Flange (5 to 6 ø) MF5 - Front Flange (5 to 6 ø) MF6 - Rear Flange (5 to 6 ø) MP1 - Double Rear Clevis (5 to 8 ø) MP2 - Double Detachable Rear Clevis/Female (5 to 8 ø) MP3 - Cap Fixed Eye (8 ø only) MP4 - Single Detachable Rear Clevis/Male (5 to 8 ø) MS1 - Foot Mount (5 to 8 ø) MS2 - Side Lug (8 only) MS3 - Centerline Lug (8 only) MS4 - Side-Tapped (5 to 8 ø) MS7 - Front Lug Mount (5 to 8 ø) MT1 - Head Trunnion (5 to 8 ø) MT2 - Cap Trunnion (5 to 8 ø) MT4 - Center Trunnion (5 to 8 ø) *See below MX0 - Basic / No Mount (5 to 8 ø) MX1 - Extended Tie-Rods; Head/Cap (5 to 8 ø) MX2 - Extended Tie-Rods; Cap (5 to 8 ø) MX3 - Extended Tie-Rods; Head (5 to 8 ø) How To Order MT4 With Non Standard XI Dimension NCA1 T - - X46US (XI = Total Inches) T Specify XI Dimension in inches Construction Type S TROKE R OD B OOT - Without Boot K Neoprene Boot A IR C USHION -...Both Ends N...None H...Cap End R...Rod End Hundredths Of An Inch Example: 25 = 0.25 (1/4) Inch Stroke X T C ONSTRUCTION T YPE (PLEASE SEE PAGE 1 FOR CONSTRUCTION DETAILS) AT Aluminum Tube (5~8 ø) ACT Composite tube (5~8 ø) O PTIONS A Special Rod Thread (Please see Page 22) B5 Oversized Rod (See Chart below for Bore Sizes above 4 ) B6 High Temperature * C3 Port and Cushion Location (see Page 23) C6 Stainless Steel Piston Rod C8 Adjustable Stroke Extended Piston Rod * C9 Adjustable Stroke Return Piston Rod * C10 Dual Operation/Double Piston Rod * C11 Dual Operation/Single Piston Rod * C12 Tandem Cylinder* * Contact SMC Customer Service N O O F S WITCHES - 2 Pieces S 1 Piece n Number of Switches A UTO S WITCH See Page 22 for Auto Switch Options *Note: Non Adjustable Cushions are available Please Consult SMC Customer Service **Note: Cushions not recommended for Strokes below 3 3 B ORE S IZE S TYLE - Pneumatic H Hydraulic S TD.ROD 1 1-3/8 1-3/8 R EFER TO PAGE 22 FOR O PTIONAL R OD T HREADS Ø S TD.ROD T HREAD 3/ S TANDARD S TROKE Inches Example: 04 = 4 Stroke O P T I O N O VERSIZED R OD - XB5 OPTION When ordering an oversized rod, please order the following way to represent the rod size required. XB5 G 1 3/8 H 1 3/4 J 2 K 2 1/2 L 3 M 3 1/2 Z Please contact SMC Customer Service for larger sizes
6 MF1 ø1.5 ~ 6 WITH FRONT RECTANGULAR FLANGE ØMM SM LB P 1 1/2 5/8 7/ / /4 5/8 1 15/ /4 1 1/2 1 3/ / / / /4 2 5/8 7/ / /4 5/8 1 15/ / / / / / / / /8 2 5/8 1 1/4 2 9/ /4 2 1/2 5/8 7/ / /4 5/8 1 15/16 4 1/8 2 3/8 2 1/2 1 3/ / / /16 4 1/8 2 3/8 2 1/2 1 3/ /8 2 5/8 1 1/4 2 9/16 4 1/8 2 3/8 3 1/4 1 3/ / /4 3/4 2 3/8 4 7/8 2 5/8 3 1/4 1 3/ /8 2 3/ /8 4 7/8 2 5/ / / /4 3/4 2 3/8 4 7/8 2 5/ / /8 2 3/ /8 4 7/8 2 5/ / / /4 3/4 2 5/16 5 1/8 2 7/ / /8 2 3/ /16 5 1/8 2 7/ /4 1 1/ /2 1 1/4 2 13/16 5 1/8 2 7/ / /8 2 1/4 7/8 2 13/16 5 3/4 3 1/ /4 1 1/ /8 1 1/8 3 1/16 5 3/4 3 1/ / / /8 1 1/4 3 3/16 5 3/4 3 1/8 BORE E EE(NPT) F FB G J K R TF UF 1 1/2 2 3/8 3/8 5/ / /4 3 3/ /2 3/8 3/8 3/ / /8 4 1/8 2 1/2 3 3/8 3/8 3/ /8 5/ /8 4 5/8 3 1/4 3 3/4 1/2 5/8 7/16 2 1/4 1 1/4 3/ /16 5 1/ /2 1/2 5/8 7/16 2 1/4 1 1/4 3/ /16 6 1/ /2 1/2 5/8 9/16 2 1/4 1 1/2 7/ /8 7 5/ /2 3/4 3/4 9/16 2 3/4 1 5/8 7/ /8 8 5/8 MF2 ø1.5 ~ 6 WITH REAR RECTANGULAR FLANGE ØMM SM LB P 1 1/2 5/8 7/ / /4 5/8 1 15/ /4 1 1/2 1 3/ / / / /4 2 5/8 7/ / /4 5/8 1 15/ / / / / / / / /8 2 5/8 1 1/4 2 9/ /4 2 1/2 5/8 7/ / /4 5/8 1 15/16 4 1/8 2 3/8 2 1/2 1 3/ / / /16 4 1/8 2 3/8 2 1/2 1 3/ /8 2 5/8 1 1/4 2 9/16 4 1/8 2 3/8 3 1/4 1 3/ / /4 3/4 2 3/8 4 7/8 2 5/8 3 1/4 1 3/ /8 2 3/ /8 4 7/8 2 5/ / / /4 3/4 2 3/8 4 7/8 2 5/ / /8 2 3/ /8 4 7/8 2 5/ / / /4 3/4 2 5/16 5 1/8 2 7/ / /8 2 3/ /16 5 1/8 2 7/ /4 1 1/ /2 1 1/4 2 13/16 5 1/8 2 7/ / /8 2 1/4 7/8 2 13/16 5 3/4 3 1/ /4 1 1/ /8 1 1/8 3 1/16 5 3/4 3 1/ / / /8 1 1/4 3 3/16 5 3/4 3 1/8 BORE E EE(NPT) F FB G J K R TF UF 1 1/2 2 3/8 3/8 5/ / /4 3 3/ /2 3/8 3/8 3/ / /8 4 1/8 2 1/2 3 3/8 3/8 3/ /8 5/ /8 4 5/8 3 1/4 3 3/4 1/2 5/8 7/16 2 1/4 1 1/4 3/ /16 5 1/ /2 1/2 5/8 7/16 2 1/4 1 1/4 3/ /16 6 1/ /2 1/2 5/8 9/16 2 1/4 1 1/2 7/ /8 7 5/ /2 3/4 3/4 9/16 2 3/4 1 5/8 7/ /8 8 5/8 4
7 MF5 ø1.5 ~ 6 WITH FRONT SQUARE FLANGE ØMM SM LB P 1 1/2 5/8 7/ / /4 5/8 1 15/ /4 1 1/2 1 3/ / / / /4 2 5/8 7/ / /4 5/8 1 15/ / / / / / / / /8 2 5/8 1 1/4 2 9/ /4 2 1/2 5/8 7/ / /4 5/8 1 15/16 4 1/8 2 3/8 2 1/2 1 3/ / / /16 4 1/8 2 3/8 2 1/2 1 3/ /8 2 5/8 1 1/4 2 9/16 4 1/8 2 3/8 3 1/4 1 3/ / /4 3/4 2 3/8 4 7/8 2 5/8 3 1/4 1 3/ /8 2 3/ /8 4 7/8 2 5/ / / /4 3/4 2 3/8 4 7/8 2 5/ / /8 2 3/ /8 4 7/8 2 5/ / / /4 3/4 2 5/16 5 1/8 2 7/ / /8 2 3/ /16 5 1/8 2 7/ /4 1 1/ /2 1 1/4 2 13/16 5 1/8 2 7/ / /8 2 1/4 7/8 2 13/16 5 3/4 3 1/ /4 1 1/ /8 1 1/8 3 1/16 5 3/4 3 1/ / / /8 1 1/4 3 3/16 5 3/4 3 1/8 BORE E EE(NPT) F FB G J K R TF UF 1 1/2 2 3/8 3/8 5/ / /4 3 3/ /2 3/8 3/8 3/ / /8 4 1/8 2 1/2 3 3/8 3/8 3/ /8 5/ /8 4 5/8 3 1/4 3 3/4 1/2 5/8 7/16 2 1/4 1 1/4 3/ /16 5 1/ /2 1/2 5/8 7/16 2 1/4 1 1/4 3/ /16 6 1/ /2 1/2 5/8 9/16 2 1/4 1 1/2 7/ /8 7 5/ /2 3/4 3/4 9/16 2 3/4 1 5/8 7/ /8 8 5/8 MF6 ø1.5 ~ 6 WITH REAR SQUARE FLANGE ØMM SM LB P 1 1/2 5/8 7/ / /4 5/8 1 15/ /4 1 1/2 1 3/ / / / /4 2 5/8 7/ / /4 5/8 1 15/ / / / / / / / /8 2 5/8 1 1/4 2 9/ /4 2 1/2 5/8 7/ / /4 5/8 1 15/16 4 1/8 2 3/8 2 1/2 1 3/ / / /16 4 1/8 2 3/8 2 1/2 1 3/ /8 2 5/8 1 1/4 2 9/16 4 1/8 2 3/8 3 1/4 1 3/ / /4 3/4 2 3/8 4 7/8 2 5/8 3 1/4 1 3/ /8 2 3/ /8 4 7/8 2 5/ / / /4 3/4 2 3/8 4 7/8 2 5/ / /8 2 3/ /8 4 7/8 2 5/ / / /4 3/4 2 5/16 5 1/8 2 7/ / /8 2 3/ /16 5 1/8 2 7/ /4 1 1/ /2 1 1/4 2 13/16 5 1/8 2 7/ / /8 2 1/4 7/8 2 13/16 5 3/4 3 1/ /4 1 1/ /8 1 1/8 3 1/16 5 3/4 3 1/ / / /8 1 1/4 3 3/16 5 3/4 3 1/8 BORE E EE(NPT) F FB G J K R TF UF 1 1/2 2 3/8 3/8 5/ / /4 3 3/ /2 3/8 3/8 3/ / /8 4 1/8 2 1/2 3 3/8 3/8 3/ /8 5/ /8 4 5/8 3 1/4 3 3/4 1/2 5/8 7/16 2 1/4 1 1/4 3/ /16 5 1/ /2 1/2 5/8 7/16 2 1/4 1 1/4 3/ /16 6 1/ /2 1/2 5/8 9/16 2 1/4 1 1/2 7/ /8 7 5/ /2 3/4 3/4 9/16 2 3/4 1 5/8 7/ /8 8 5/8 5
8 MP1 ø1.5 ~ 6 WITH DOUBLE REAR CLEVIS ØMM SM LB P XC 1 1/2 5/8 7/ / /4 5/8 1 15/ /4 5 3/8 1 1/2 1 3/ / / / /4 5 3/4 2 5/8 7/ / /4 5/8 1 15/ /4 5 3/ / / / / /4 5 3/ / /8 2 5/8 1 1/4 2 9/ / /2 5/8 7/ / /4 5/8 1 15/16 4 1/8 2 3/8 5 1/2 2 1/2 1 3/ / / /16 4 1/8 2 3/8 5 7/8 2 1/2 1 3/ /8 2 5/8 1 1/4 2 9/16 4 1/8 2 3/8 6 1/8 3 1/4 1 3/ / /4 3/4 2 3/8 4 7/8 2 5/8 6 7/8 3 1/4 1 3/ /8 2 3/ /8 4 7/8 2 5/8 7 1/ / / /4 3/4 2 3/8 4 7/8 2 5/8 6 7/ / /8 2 3/ /8 4 7/8 2 5/8 7 1/ / / /4 3/4 2 5/16 5 1/8 2 7/8 7 1/ / /8 2 3/ /16 5 1/8 2 7/8 7 3/ /4 1 1/ /2 1 1/4 2 13/16 5 1/8 2 7/8 7 5/ / /8 2 1/4 7/8 2 13/16 5 3/4 3 1/8 8 1/ /4 1 1/ /8 1 1/8 3 1/16 5 3/4 3 1/8 8 3/ / / /8 1 1/4 3 3/16 5 3/4 3 1/8 8 1/2 HEAVY DUTY Bore CB CD CW E EE(NPT) F 1 1/2 3/4 1/2 1/2 2 3/8 3/8 2 3/4 1/2 1/2 2 1/2 3/8 3/8 2 1/2 3/4 1/2 1/2 3 3/8 3/8 3 1/4 1 1/4 3/4 5/8 3 3/4 1/2 5/ /4 3/4 5/8 4 1/2 1/2 5/ /4 3/4 5/8 5 1/2 1/2 5/ /2 1 3/4 6 1/2 3/4 3/4 BORE G J K L LR MR 1 1/ /4 3/4 3/4 5/ /16 3/4 3/4 5/8 2 1/ /8 5/16 3/4 3/4 5/8 3 1/4 2 1/4 1 1/4 3/8 1 1/4 1 1/4 7/ /4 1 1/4 3/8 1 1/4 1 1/4 7/ /4 1 1/2 7/16 1 1/4 1 1/4 7/ /4 1 5/8 7/16 1 1/2 1 1/2 1 1/4 MEDIUM DUTY MP2 ø1.5 ~ 6 WITH DOUBLE DETACHABLE REAR CLEVIS / FEMALE Bore Rod KK A B V W Y Add Stroke ømm SM LB P XD 1 1/2 5/8 7/ / /4 5/8 1 15/ /4 5 3/4 1 1/2 1 3/ / / / /4 6 1/8 2 5/8 7/ / /4 5/8 1 15/ /4 5 3/ / / / / /4 6 1/ / /8 2 5/8 1 1/4 2 9/ /4 6 3/8 2 1/2 5/8 7/ / /4 5/8 1 15/16 4 1/8 2 3/8 5 7/8 2 1/2 1 3/ / / /16 4 1/8 2 3/8 6 1/4 2 1/2 1 3/ /8 2 5/8 1 1/4 2 9/16 4 1/8 2 3/8 6 1/2 3 1/4 1 3/ / /4 3/4 2 3/8 4 7/8 2 5/8 7 1/2 3 1/4 1 3/ /8 2 3/ /8 4 7/8 2 5/8 7 3/ / / /4 3/4 2 3/8 4 7/8 2 5/8 7 1/ / /8 2 3/ /8 4 7/8 2 5/8 7 3/ / / /4 3/4 2 5/16 5 1/8 2 7/8 7 3/ / /8 2 3/ /16 5 1/8 2 7/ /4 1 1/ /2 1 1/4 2 13/16 5 1/8 2 7/8 8 1/ / /8 2 1/4 7/8 2 13/16 5 3/4 3 1/8 8 7/ /4 1 1/ /8 1 1/8 3 1/16 5 3/4 3 1/8 9 1/ / / /8 1 1/4 3 3/16 5 3/4 3 1/8 9 1/4 Bore CB CD CW E EE(NPT) F 1 1/2 3/4 1/2 1/2 2 3/8 3/8 2 3/4 1/2 1/2 2 1/2 3/8 3/8 2 1/2 3/4 1/2 1/2 3 3/8 3/8 3 1/4 1 1/4 3/4 5/8 3 3/4 1/2 5/ /4 3/4 5/8 4 1/2 1/2 5/ /4 3/4 5/8 5 1/2 1/2 5/ /2 1 3/4 6 1/2 3/4 3/4 BORE G J K L LR MR 1 1/2 3/8 2 11/4 3/4 3/4 5/ /16 3/4 3/4 5/8 2 1/ /8 5/16 3/4 3/4 5/8 3 1/4 2 1/4 1 1/4 3/8 1 1/4 1 1/4 7/ /4 1 1/4 3/8 1 1/4 1 1/4 7/ /4 1 1/2 7/16 1 1/4 1 1/4 7/ /4 1 5/8 7/16 1 1/2 1 1/2 1 1/4 6
9 MP3 ø1.5 ~ 6 WITH CAP FIXED EYE ØMM SM LB P XC 1 1/2 5/8 7/ / /4 5/8 1 15/ /4 5 3/8 1 1/2 1 3/ / / / /4 5 3/4 2 5/8 7/ / /4 5/8 1 15/ /4 5 3/ / / / / /4 5 3/ / /8 2 5/8 1 1/4 2 9/ / /2 5/8 7/ / /4 5/8 1 15/16 4 1/8 2 3/8 5 1/2 2 1/2 1 3/ / / /16 4 1/8 2 3/8 5 7/8 2 1/2 1 3/ /8 2 5/8 1 1/4 2 9/16 4 1/8 2 3/8 6 1/8 3 1/4 1 3/ / /4 3/4 2 3/8 4 7/8 2 5/8 6 7/8 3 1/4 1 3/ /8 2 3/ /8 4 7/8 2 5/8 7 1/ / / /4 3/4 2 3/8 4 7/8 2 5/8 6 7/ / /8 2 3/ /8 4 7/8 2 5/8 7 1/ / / /4 3/4 2 5/16 5 1/8 2 7/8 7 1/ / /8 2 3/ /16 5 1/8 2 7/8 7 3/ /4 1 1/ /2 1 1/4 2 13/16 5 1/8 2 7/8 7 5/ / /8 2 1/4 7/8 2 13/16 5 3/4 3 1/8 8 1/ /4 1 1/ /8 1 1/8 3 1/16 5 3/4 3 1/8 8 3/ / / /8 1 1/4 3 3/16 5 3/4 3 1/8 8 1/2 BORE CB CD E EE(NPT) F 1 1/2 3/4 1/2 2 3/8 3/8 2 3/4 1/2 2 1/2 3/8 3/8 2 1/2 3/4 1/2 3 3/8 3/8 3 1/4 1 1/4 3/4 3 3/4 1/2 5/ /4 3/4 4 1/2 1/2 5/ /4 3/4 5 1/2 1/2 5/ / /2 3/4 3/4 BORE G J K L LR MR 1 1/ /4 3/4 3/4 5/ /16 3/4 3/4 5/8 2 1/ /8 5/16 3/4 3/4 5/8 3 1/4 2 1/4 1 1/4 3/8 1 1/4 1 1/4 7/ /4 1 1/4 3/8 1 1/4 1 1/4 7/ /4 1 1/2 7/16 1 1/4 1 1/4 7/ /4 1 5/8 7/16 1 1/2 1 1/2 1 1/4 MP4 ø1.5 ~ 6 WITH SINGLE DETACHABLE REAR CLEVIS / MALE ØMM SM LB P XD 1 1/2 5/8 7/ / /4 5/8 1 15/ /4 5 3/4 1 1/2 1 3/ / / / /4 6 1/8 2 5/8 7/ / /4 5/8 1 15/ /4 5 3/ / / / / /4 6 1/ / /8 2 5/8 1 1/4 2 9/ /4 6 3/8 2 1/2 5/8 7/ / /4 5/8 1 15/16 4 1/8 2 3/8 5 7/8 2 1/2 1 3/ / / /16 4 1/8 2 3/8 6 1/4 2 1/2 1 3/ /8 2 5/8 1 1/4 2 9/16 4 1/8 2 3/8 6 1/2 3 1/4 1 3/ / /4 3/4 2 3/8 4 7/8 2 5/8 7 1/2 3 1/4 1 3/ /8 2 3/ /8 4 7/8 2 5/8 7 3/ / / /4 3/4 2 3/8 4 7/8 2 5/8 7 1/ / /8 2 3/ /8 4 7/8 2 5/8 7 3/ / / /4 3/4 2 5/16 5 1/8 2 7/8 7 3/ / /8 2 3/ /16 5 1/8 2 7/ /4 1 1/ /2 1 1/4 2 13/16 5 1/8 2 7/8 8 1/ / /8 2 1/4 7/8 2 13/16 5 3/4 3 1/8 8 7/ /4 1 1/ /8 1 1/8 3 1/16 5 3/4 3 1/8 9 1/ / / /8 1 1/4 3 3/16 5 3/4 3 1/8 9 1/4 BORE CB CD E EE(NPT) F 1 1/2 3/4 1/2 2 3/8 3/8 2 3/4 1/2 2 1/2 3/8 3/8 2 1/2 3/4 1/2 3 3/8 3/8 3 1/4 1 1/4 3/4 3 3/4 1/2 5/ /4 3/4 4 1/2 1/2 5/ /4 3/4 5 1/2 1/2 5/ / /2 3/4 3/4 BORE G J K L LR MR 1 1/ /4 3/4 3/4 5/ /16 3/4 3/4 5/8 2 1/ /8 5/16 3/4 3/4 5/8 3 1/4 2 1/4 1 1/4 3/8 1 1/4 1 1/4 7/ /4 1 1/4 3/8 1 1/4 1 1/4 7/ /4 1 1/2 7/16 1 1/4 1 1/4 7/ /4 1 5/8 7/16 1 1/2 1 1/2 1 1/4 7
10 MS1 ø1.5 ~ 6 WITH FOOT MOUNT ØMM SM LB P SA 1 1/2 5/8 7/ / /4 5/8 1 15/ / /2 1 3/ / / / / /8 7/ / /4 5/8 1 15/ / / / / / / / /8 2 5/8 1 1/4 2 9/ / /2 5/8 7/ / /4 5/8 1 15/16 4 1/8 2 3/8 6 1/8 2 1/2 1 3/ / / /16 4 1/8 2 3/8 6 1/8 2 1/2 1 3/ /8 2 5/8 1 1/4 2 9/16 4 1/8 2 3/8 6 1/8 3 1/4 1 3/ / /4 3/4 2 3/8 4 7/8 2 5/8 7 3/8 3 1/4 1 3/ /8 2 3/ /8 4 7/8 2 5/8 7 3/ / / /4 3/4 2 3/8 4 7/8 2 5/8 7 3/ / /8 2 3/ /8 4 7/8 2 5/8 7 3/ / / /4 3/4 2 5/16 5 1/8 2 7/8 7 7/ / /8 2 3/ /16 5 1/8 2 7/8 7 7/ /4 1 1/ /2 1 1/4 2 13/16 5 1/8 2 7/8 7 7/ / /8 2 1/4 7/8 2 13/16 5 3/4 3 1/8 8 1/ /4 1 1/ /8 1 1/8 3 1/16 5 3/4 3 1/8 8 1/ / / /8 1 1/4 3 3/16 5 3/4 3 1/8 8 1/2 BORE AB AH AL AO AT 1 1/2 7/16 1 3/16 1 3/8 1/8 2 7/16 1 7/16 1 3/8 1/8 2 1/2 7/16 1 5/8 1 3/8 1/8 3 1/4 9/ /16 1 1/4 1/2 1/8 4 9/16 2 1/4 1 1/4 1/2 1/8 5 11/16 2 3/4 1 3/8 5/8 3/ /16 3 1/4 1 3/8 5/8 3/16 BORE E EE(NPT) F G J K S 1 1/2 2 3/8 3/ /4 1 1/ /2 3/8 3/ /16 1 3/4 2 1/2 3 3/8 3/ /8 5/16 2 1/4 3 1/4 3 3/4 1/2 5/8 2 1/4 1 1/4 5/16 2 3/ /2 1/2 5/8 2 1/4 1 1/4 3/8 3 1/ /2 1/2 5/8 2 1/4 1 1/2 7/16 4 1/ /2 3/4 3/4 2 3/4 1 5/8 7/16 5 1/4 MS2 ø1.5 ~ 6 WITH SIDE LUG BORE ROD KK A B V W XS Y ADD STROKE ØMM SM LB P SS 1 1/2 5/8 7/ / /4 5/8 1 3/8 1 15/ /4 2 7/8 1 1/2 1 3/ / / /4 2 5/ /4 2 7/8 2 5/8 7/ / /4 5/8 1 15/ / /4 2 7/ / / / /16 2 5/ /4 2 7/ / /8 2 5/8 1 1/ / /4 2 7/8 2 1/2 5/8 7/ / /4 5/8 1 3/8 1 15/16 4 1/8 2 3/ /2 1 3/ / / /4 2 5/16 4 1/8 2 3/ /2 1 3/ /8 2 5/8 1 1/ /16 4 1/8 2 3/ /4 1 3/ / /4 3/4 1 7/8 2 3/8 4 7/8 2 5/8 3 1/4 3 1/4 1 3/ /8 2 3/ /8 2 5/8 4 7/8 2 5/8 3 1/ / / /4 3/4 1 7/8 2 3/8 4 7/8 2 5/8 3 1/ / /8 2 3/ /8 2 5/8 4 7/8 2 5/8 3 1/ / / /4 3/4 2 1/16 2 5/16 5 1/8 2 7/8 3 1/ / /8 2 3/ /16 2 9/16 5 1/8 2 7/8 3 1/ /4 1 1/ /2 1 1/4 2 9/ /16 5 1/8 2 7/8 3 1/ / /8 2 1/4 7/8 2 5/ /16 5 3/4 3 1/8 3 5/ /4 1 1/ /8 1 1/8 2 9/16 3 1/16 5 3/4 3 1/8 3 5/ / / /8 1 1/4 2 11/16 3 3/16 5 3/4 3 1/8 3 5/8 BORE E EE(NPT) F G J K 1 1/2 2 3/8 3/ / /2 3/8 3/ /16 2 1/2 3 3/8 3/ /8 5/16 3 1/4 3 3/4 1/2 5/8 2 1/4 1 1/4 3/ /2 1/2 5/8 2 1/4 1 1/4 3/ /2 1/2 5/8 2 1/4 1 1/2 7/ /2 3/4 3/4 2 3/4 1 5/8 7/16 BORE SB ST SU SW TS 1 1/2 7/16 1/2 15/16 3/8 2 3/4 2 7/16 1/2 15/16 3/8 3 1/4 2 1/2 7/16 1/2 15/16 3/8 3 3/4 3 1/4 9/16 3/4 1 1/4 1/2 4 3/4 4 9/16 3/4 1 1/4 1/2 5 1/2 5 13/ /16 11/16 6 7/8 6 13/ /16 11/16 7 7/8 8
11 MS3 ø1.5 ~ 6 WITH CENTERLINE LUG BORE ROD KK A B V W XS Y ADD STROKE ØMM SM LB P SS 1 1/2 5/8 7/ / /4 5/8 1 3/8 1 15/ /4 2 7/8 1 1/2 1 3/ / / /4 2 5/ /4 2 7/8 2 5/8 7/ / /4 5/8 1 15/ / /4 2 7/ / / / /16 2 5/ /4 2 7/ / /8 2 5/8 1 1/ / /4 2 7/8 2 1/2 5/8 7/ / /4 5/8 1 3/8 1 15/16 4 1/8 2 3/ /2 1 3/ / / /4 2 5/16 4 1/8 2 3/ /2 1 3/ /8 2 5/8 1 1/ /16 4 1/8 2 3/ /4 1 3/ / /4 3/4 1 7/8 2 3/8 4 7/8 2 5/8 3 1/4 3 1/4 1 3/ /8 2 3/ /8 2 5/8 4 7/8 2 5/8 3 1/ / / /4 3/4 1 7/8 2 3/8 4 7/8 2 5/8 3 1/ / /8 2 3/ /8 2 5/8 4 7/8 2 5/8 3 1/ / / /4 3/4 2 1/16 2 5/16 5 1/8 2 7/8 3 1/ / /8 2 3/ /16 2 9/16 5 1/8 2 7/8 3 1/ /4 1 1/ /2 1 1/4 2 9/ /16 5 1/8 2 7/8 3 1/ / /8 2 1/4 7/8 2 5/ /16 5 3/4 3 1/8 3 5/ /4 1 1/ /8 1 1/8 2 9/16 3 1/16 5 3/4 3 1/8 3 5/ / / /8 1 1/4 2 11/16 3 3/16 5 3/4 3 1/8 3 5/8 BORE E EE(NPT) F G J K 1 1/2 2 3/8 3/ / /2 3/8 3/ /16 2 1/2 3 3/8 3/ /8 5/16 3 1/4 3 3/4 1/2 5/8 2 1/4 1 1/4 3/ /2 1/2 5/8 2 1/4 1 1/4 3/ /2 1/2 5/8 2 1/4 1 1/2 7/ /2 3/4 3/4 2 3/4 1 5/8 7/16 BORE SB ST SU SW TS 1 1/2 7/16 1/2 15/16 3/8 2 3/4 2 7/16 1/2 15/16 3/8 3 1/4 2 1/2 7/16 1/2 15/16 3/8 3 3/4 3 1/4 9/16 3/4 1 1/4 1/2 4 3/4 4 9/16 3/4 1 1/4 1/2 5 1/2 5 13/ /16 11/16 6 7/8 6 13/ /16 11/16 7 7/8 MS4 ø1.5 ~ 6 SIDE TAPPED IM ØMM SM LB P SN XT 1 1/2 5/8 7/ / /4 5/8 1 15/ /4 2 1/4 1 15/16 1 1/2 1 3/ / / / /4 2 1/4 2 5/16 2 5/8 7/ / /4 5/8 1 15/ /4 2 1/4 1 15/ / / / / /4 2 1/4 2 5/ / /8 2 5/8 1 1/4 2 9/ /4 2 1/4 2 9/16 2 1/2 5/8 7/ / /4 5/8 1 15/16 4 1/8 2 3/8 2 3/8 1 15/16 2 1/2 1 3/ / / /16 4 1/8 2 3/8 2 3/8 2 5/16 2 1/2 1 3/ /8 2 5/8 1 1/4 2 9/16 4 1/8 2 3/8 2 3/8 2 9/16 3 1/4 1 3/ / /4 3/4 2 3/8 4 7/8 2 5/8 2 5/8 2 7/16 3 1/4 1 3/ /8 2 3/ /8 4 7/8 2 5/8 2 5/8 2 11/ / / /4 3/4 2 3/8 4 7/8 2 5/8 2 5/8 2 7/ / /8 2 3/ /8 4 7/8 2 5/8 2 5/8 2 11/ / / /4 3/4 2 5/16 5 1/8 2 7/8 2 7/8 2 7/ / /8 2 3/ /16 5 1/8 2 7/8 2 7/8 2 11/ /4 1 1/ /2 1 1/4 2 13/16 5 1/8 2 7/8 2 7/8 2 15/ / /8 2 1/4 7/8 2 13/16 5 3/4 3 1/8 3 1/8 2 13/ /4 1 1/ /8 1 1/8 3 1/16 5 3/4 3 1/8 3 1/8 3 1/ / / /8 1 1/4 3 3/16 5 3/4 3 1/8 3 1/8 3 3/16 BORE E EE(NPT) F G J K NT TN 1 1/2 2 3/8 3/ /4 1/4-20 5/ /2 3/8 3/ /16 5/ /8 2 1/2 3 3/8 3/ /8 5/16 3/ /4 3 1/4 3 3/4 1/2 5/8 2 1/4 1 1/4 3/8 1/ / /2 1/2 5/8 2 1/4 1 1/4 3/8 1/ / /2 1/2 5/8 2 1/4 1 1/2 7/16 5/ / /2 3/4 3/4 2 3/4 1 5/8 7/16 3/ /4 9
12 MS7 ø1.5 ~ 6 WITH FRONT LUG MOUNT ØMM SM LB P SE 1 1/2 5/8 7/ / /4 5/8 1 15/ /4 5 1/2 1 1/2 1 3/ / / / /4 5 1/2 2 5/8 7/ / /4 5/8 1 15/ /4 5 7/ / / / / /4 5 7/ / /8 2 5/8 1 1/4 2 9/ /4 5 7/8 2 1/2 5/8 7/ / /4 5/8 1 15/16 4 1/8 2 3/8 6 1/4 2 1/2 1 3/ / / /16 4 1/8 2 3/8 6 1/4 2 1/2 1 3/ /8 2 5/8 1 1/4 2 9/16 4 1/8 2 3/8 6 1/4 3 1/4 1 3/ / /4 3/4 2 3/8 4 7/8 2 5/8 6 5/8 3 1/4 1 3/ /8 2 3/ /8 4 7/8 2 5/8 6 5/ / / /4 3/4 2 3/8 4 7/8 2 5/8 6 7/ / /8 2 3/ /8 4 7/8 2 5/8 6 7/ / / /4 3/4 2 5/16 5 1/8 2 7/8 7 1/ / /8 2 3/ /16 5 1/8 2 7/8 7 1/ /4 1 1/ /2 1 1/4 2 13/16 5 1/8 2 7/8 7 1/ / /8 2 1/4 7/8 2 13/16 5 3/4 3 1/8 7 3/ /4 1 1/ /8 1 1/8 3 1/16 5 3/4 3 1/8 7 3/ / / /8 1 1/4 3 3/16 5 3/4 3 1/8 7 3/4 BORE E EB EE(NPT) EL EO ES ET F G J K R 1 1/2 2 5/16 3/8 3/4 1/4 9/16 17/32 3/ / /2 3/8 3/8 15/16 5/16 5/8 5/8 3/ / /2 3 3/8 3/8 1 1/16 5/16 13/16 25/32 3/ /8 5/ /4 3 3/4 7/16 1/2 7/8 3/8 1 15/16 5/8 2 1/4 1 1/4 3/ /2 7/16 1/2 1 3/8 1 1/4 1 5/32 5/8 2 1/4 1 1/4 3/ /2 9/16 1/2 1 1/16 1/2 1 3/8 1 3/8 5/8 2 1/4 1 1/2 7/ /2 9/16 3/4 1 1/2 1 3/4 1 19/32 3/4 2 3/4 1 5/8 7/ MT1 ø1.5 ~ 6 WITH HEAD TRUNNION BORE ROD KK A B V W XG Y ADD STROKE ØMM SM LB P 1 1/2 5/8 7/ / /4 5/8 1 3/4 1 15/ /4 1 1/2 1 3/ / / /8 2 5/ /4 2 5/8 7/ / /4 5/8 1 3/4 1 15/ / / / / /8 2 5/ / / /8 2 5/8 1 1/4 2 3/8 2 9/ /4 2 1/2 5/8 7/ / /4 5/8 1 3/4 1 15/16 4 1/8 2 3/8 2 1/2 1 3/ / / /8 2 5/16 4 1/8 2 3/8 2 1/2 1 3/ /8 2 5/8 1 1/4 2 3/8 2 9/16 4 1/8 2 3/8 3 1/4 1 3/ / /4 3/4 2 1/4 2 3/8 4 7/8 2 5/8 3 1/4 1 3/ /8 2 3/ /2 2 5/8 4 7/8 2 5/ / / /4 3/4 2 1/4 2 3/8 4 7/8 2 5/ / /8 2 3/ /2 2 5/8 4 7/8 2 5/ / / /4 3/4 2 1/4 2 5/16 5 1/8 2 7/ / /8 2 3/ /2 2 9/16 5 1/8 2 7/ /4 1 1/ /2 1 1/4 2 3/4 2 13/16 5 1/8 2 7/ / /8 2 1/4 7/8 2 5/8 2 13/16 5 3/4 3 1/ /4 1 1/ /8 1 1/8 2 7/8 3 1/16 5 3/4 3 1/ / / /8 1 1/ /16 5 3/4 3 1/8 BORE E EE(NPT) F G J K TD TL UT 1 1/2 2 3/8 3/ / /2 3/8 3/ / /2 2 1/2 3 3/8 3/ /8 5/ /4 3 3/4 1/2 5/8 2 1/4 1 1/4 3/ / /2 1/2 5/8 2 1/4 1 1/4 3/ / /2 1/2 5/8 2 1/4 1 1/2 7/ / /2 3/4 3/4 2 3/4 1 5/8 7/16 1 3/8 1 3/8 9 1/4 10
13 MT2 ø1.5 ~ 6 WITH REAR TRUNNION ØMM SM LB P XJ 1 1/2 5/8 7/ / /4 5/8 1 15/ /4 4 1/8 1 1/2 1 3/ / / / /4 4 1/2 2 5/8 7/ / /4 5/8 1 15/ /4 4 1/ / / / / /4 4 1/ / /8 2 5/8 1 1/4 2 9/ /4 4 3/4 2 1/2 5/8 7/ / /4 5/8 1 15/16 4 1/8 2 3/8 4 1/4 2 1/2 1 3/ / / /16 4 1/8 2 3/8 4 5/8 2 1/2 1 3/ /8 2 5/8 1 1/4 2 9/16 4 1/8 2 3/8 4 7/8 3 1/4 1 3/ / /4 3/4 2 3/8 4 7/8 2 5/ /4 1 3/ /8 2 3/ /8 4 7/8 2 5/8 5 1/ / / /4 3/4 2 3/8 4 7/8 2 5/ / /8 2 3/ /8 4 7/8 2 5/8 5 1/ / / /4 3/4 2 5/16 5 1/8 2 7/8 5 1/ / /8 2 3/ /16 5 1/8 2 7/8 5 1/ /4 1 1/ /2 1 1/4 2 13/16 5 1/8 2 7/8 5 3/ / /8 2 1/4 7/8 2 13/16 5 3/4 3 1/8 5 7/ /4 1 1/ /8 1 1/8 3 1/16 5 3/4 3 1/8 6 1/ / / /8 1 1/4 3 3/16 5 3/4 3 1/8 6 1/4 BORE E EE(NPT) F G J K 1 1/2 2 3/8 3/ / /2 3/8 3/ /16 2 1/2 3 3/8 3/ /8 5/16 3 1/4 3 3/4 1/2 5/8 2 1/4 1 1/4 3/ /2 1/2 5/8 2 1/4 1 1/4 3/ /2 1/2 5/8 2 1/4 1 1/2 7/ /2 3/4 3/4 2 3/4 1 5/8 7/16 BORE TD TL UT 1 1/ /2 2 1/ / / / / /8 1 3/8 9 1/4 MT4 ø1.5 ~ 6 WITH CENTER TRUNNION ADD STROKE/2 ØMM SM LB P XI 1 1/2 5/8 7/ / /4 5/8 1 15/ / /2 1 3/ / / / / /8 7/ / /4 5/8 1 15/ / / / / / / / /8 2 5/8 1 1/4 2 9/ / /2 5/8 7/ / /4 5/8 1 15/16 4 1/8 2 3/ /2 1 3/ / / /16 4 1/8 2 3/ /2 1 3/ /8 2 5/8 1 1/4 2 9/16 4 1/8 2 3/ /4 1 3/ / /4 3/4 2 3/8 4 7/8 2 5/ /4 1 3/ /8 2 3/ /8 4 7/8 2 5/ / / /4 3/4 2 3/8 4 7/8 2 5/ / /8 2 3/ /8 4 7/8 2 5/ / / /4 3/4 2 5/16 5 1/8 2 7/ / /8 2 3/ /16 5 1/8 2 7/ /4 1 1/ /2 1 1/4 2 13/16 5 1/8 2 7/ / /8 2 1/4 7/8 2 13/16 5 3/4 3 1/ /4 1 1/ /8 1 1/8 3 1/16 5 3/4 3 1/ / / /8 1 1/4 3 3/16 5 3/4 3 1/ BORE BD E EE(NPT) F G J K 1 1/2 1 1/4 2 3/8 3/ / /4 2 1/2 3/8 3/ /16 2 1/2 1 1/4 3 3/8 3/ /8 5/16 3 1/4 1 1/2 3 3/4 1/2 5/8 2 1/4 1 1/4 3/ /2 4 1/2 1/2 5/8 2 1/4 1 1/4 3/ /2 5 1/2 1/2 5/8 2 1/4 1 1/2 7/ /4 6 1/2 3/4 3/4 2 3/4 1 5/8 7/16 BORE TD TL TM UM UW 1 1/ /2 4 1/2 2 1/ / /2 5 1/2 3 1/2 3 1/ /2 6 1/2 4 1/ /4 7 1/4 5 1/ /4 8 1/4 6 1/ /8 1 3/8 7 5/8 10 3/8 7 5/8 11
14 MX1 ø1.5 ~ 6 WITH EXTENDED TIE-RODS / BOTH ENDS ØMM SM LB P 1 1/2 5/8 7/ / /4 5/8 1 15/ /4 1 1/2 1 3/ / / / /4 2 5/8 7/ / /4 5/8 1 15/ / / / / / / / /8 2 5/8 1 1/4 2 9/ /4 2 1/2 5/8 7/ / /4 5/8 1 15/16 4 1/8 2 3/8 2 1/2 1 3/ / / /16 4 1/8 2 3/8 2 1/2 1 3/ /8 2 5/8 1 1/4 2 9/16 4 1/8 2 3/8 3 1/4 1 3/ / /4 3/4 2 3/8 4 7/8 2 5/8 3 1/4 1 3/ /8 2 3/ /8 4 7/8 2 5/ / / /4 3/4 2 3/8 4 7/8 2 5/ / /8 2 3/ /8 4 7/8 2 5/ / / /4 3/4 2 5/16 5 1/8 2 7/ / /8 2 3/ /16 5 1/8 2 7/ /4 1 1/ /2 1 1/4 2 13/16 5 1/8 2 7/ / /8 2 1/4 7/8 2 13/16 5 3/4 3 1/ /4 1 1/ /8 1 1/8 3 1/16 5 3/4 3 1/ / / /8 1 1/4 3 3/16 5 3/4 3 1/8 BORE AA BB DD E EE(NPT) F G J K R 1 1/ / /8 3/ / /8 5/ /2 3/8 3/ / / /8 5/ /8 3/ /8 5/ / /8 3/ /4 1/2 5/8 2 1/4 1 1/4 3/ /8 3/ /2 1/2 5/8 2 1/4 1 1/4 3/ /16 1/ /2 1/2 5/8 2 1/4 1 1/2 7/ /16 1/ /2 3/4 3/4 2 3/4 1 5/8 7/ MX2 ø1.5 ~ 6 WITH EXTENDED TIE-RODS / CAP ØMM SM LB P 1 1/2 5/8 7/ / /4 5/8 1 15/ /4 1 1/2 1 3/ / / / /4 2 5/8 7/ / /4 5/8 1 15/ / / / / / / / /8 2 5/8 1 1/4 2 9/ /4 2 1/2 5/8 7/ / /4 5/8 1 15/16 4 1/8 2 3/8 2 1/2 1 3/ / / /16 4 1/8 2 3/8 2 1/2 1 3/ /8 2 5/8 1 1/4 2 9/16 4 1/8 2 3/8 3 1/4 1 3/ / /4 3/4 2 3/8 4 7/8 2 5/8 3 1/4 1 3/ /8 2 3/ /8 4 7/8 2 5/ / / /4 3/4 2 3/8 4 7/8 2 5/ / /8 2 3/ /8 4 7/8 2 5/ / / /4 3/4 2 5/16 5 1/8 2 7/ / /8 2 3/ /16 5 1/8 2 7/ /4 1 1/ /2 1 1/4 2 13/16 5 1/8 2 7/ / /8 2 1/4 7/8 2 13/16 5 3/4 3 1/ /4 1 1/ /8 1 1/8 3 1/16 5 3/4 3 1/ / / /8 1 1/4 3 3/16 5 3/4 3 1/8 BORE AA BB DD E EE(NPT) F G J K R 1 1/ / /8 3/ / /8 5/ /2 3/8 3/ / / /8 5/ /8 3/ /8 5/ / /8 3/ /4 1/2 5/8 2 1/4 1 1/4 3/ /8 3/ /2 1/2 5/8 2 1/4 1 1/4 3/ /16 1/ /2 1/2 5/8 2 1/4 1 1/2 7/ /16 1/ /2 3/4 3/4 2 3/4 1 5/8 7/
15 MX3 ø1.5 ~ 6 WITH EXTENDED TIE-RODS / HEAD ØMM SM LB P 1 1/2 5/8 7/ / /4 5/8 1 15/ /4 1 1/2 1 3/ / / / /4 2 5/8 7/ / /4 5/8 1 15/ / / / / / / / /8 2 5/8 1 1/4 2 9/ /4 2 1/2 5/8 7/ / /4 5/8 1 15/16 4 1/8 2 3/8 2 1/2 1 3/ / / /16 4 1/8 2 3/8 2 1/2 1 3/ /8 2 5/8 1 1/4 2 9/16 4 1/8 2 3/8 3 1/4 1 3/ / /4 3/4 2 3/8 4 7/8 2 5/8 3 1/4 1 3/ /8 2 3/ /8 4 7/8 2 5/ / / /4 3/4 2 3/8 4 7/8 2 5/ / /8 2 3/ /8 4 7/8 2 5/ / / /4 3/4 2 5/16 5 1/8 2 7/ / /8 2 3/ /16 5 1/8 2 7/ /4 1 1/ /2 1 1/4 2 13/16 5 1/8 2 7/ / /8 2 1/4 7/8 2 13/16 5 3/4 3 1/ /4 1 1/ /8 1 1/8 3 1/16 5 3/4 3 1/ / / /8 1 1/4 3 3/16 5 3/4 3 1/8 BORE AA BB DD E EE(NPT) F G J K R 1 1/ / /8 3/ / /8 5/ /2 3/8 3/ / / /8 5/ /8 3/ /8 5/ / /8 3/ /4 1/2 5/8 2 1/4 1 1/4 3/ /8 3/ /2 1/2 5/8 2 1/4 1 1/4 3/ /16 1/ /2 1/2 5/8 2 1/4 1 1/2 7/ /16 1/ /2 3/4 3/4 2 3/4 1 5/8 7/ ME3 ø8 ~ 14 WITH HEAD SQUARE MOUNT BORE ROD KK A B V W Y ØMM SM 8 1 3/ /8 2 1/4 7/8 2 13/ /4 1 1/ /8 1 1/8 3 1/ / / /8 1 1/4 3 3/ /2 1 7/ /2 1 1/2 3 7/ /4 1 1/ /8 1 1/8 3 1/ / / /8 1 1/4 3 1/ /2 1 7/ /2 1 1/2 3 1/ / / /8 1 1/4 3 1/ /2 1 7/ /2 1 1/2 3 1/ / / /2 1 1/2 3 1/ /2 1 7/ /2 1 1/2 3 13/ / / /2 1 1/2 3 13/ /2 2 1/ / /2 1 1/2 3 13/16 BORE E EE(NPT) EB F G J K RD TE ADD STROKE LB P 8 8 1/2 3/4 11/16 3/ /2 9/16 4 1/ /8 3 1/ /8 1 13/16 3/4 2 1/4 2 11/16 4 1/ /8 4 1/ /4 1 13/16 3/4 2 1/4 2 11/16 5 1/ /8 4 5/ /4 1 1/4 15/16 3/4 2 3/4 2 1/4 3/ /8 5 1/2 13
16 ME4 ø8 ~ 14 WITH CAP SQUARE MOUNT BORE ROD KK A B V W Y ØMM SM 8 1 3/ /8 2 1/4 7/8 2 13/ /4 1 1/ /8 1 1/8 3 1/ / / /8 1 1/4 3 3/ /2 1 7/ /2 1 1/2 3 7/ /4 1 1/ /8 1 1/8 3 1/ / / /8 1 1/4 3 1/ /2 1 7/ /2 1 1/2 3 1/ / / /8 1 1/4 3 1/ /2 1 7/ /2 1 1/2 3 1/ / / /2 1 1/2 3 1/ /2 1 7/ /2 1 1/2 3 13/ / / /2 1 1/2 3 13/ /2 2 1/ / /2 1 1/2 3 13/16 BORE E EE(NPT) EB F G 8 8 1/2 3/4 11/16 3/ /8 1 13/16 3/4 2 1/ /4 1 13/16 3/4 2 1/ /4 1 1/4 15/16 3/4 2 3/4 BORE J K TE ADD STROKE LB P 8 1 1/2 9/ /8 3 1/ / /8 4 1/ / /8 4 5/ /4 3/ /8 5 1/2 MP1 ø8 ~ 14 WITH DOUBLE REAR CLEVIS ØMM SM LB P XC 8 1 3/ /8 2 1/4 7/8 2 13/16 5 7/8 3 1/4 8 1/ /4 1 1/ /8 1 1/8 3 1/16 5 7/8 3 1/4 8 1/ / / /8 1 1/4 3 3/16 5 7/8 3 1/4 8 5/ /2 1 7/ /2 1 1/2 3 7/16 5 7/8 3 1/4 8 7/ /4 1 1/ /8 1 1/8 3 1/8 7 1/8 4 1/8 10 3/ / / /8 1 1/4 3 1/4 7 1/8 4 1/8 10 1/ /2 1 7/ /2 1 1/2 3 1/2 7 1/8 4 1/8 10 3/ / / /8 1 1/4 3 1/4 7 5/8 4 5/8 11 1/ /2 1 7/ /2 1 1/2 3 1/2 7 5/8 4 5/8 11 3/ / / /2 1 1/2 3 1/2 7 5/8 4 5/8 11 3/ /2 1 7/ /2 1 1/2 3 13/16 8 7/8 5 1/2 12 7/ / / /2 1 1/2 3 13/16 8 7/8 5 1/2 12 7/ /2 2 1/ / /2 1 1/2 3 13/16 8 7/8 5 1/2 12 7/8 BORE CB CD CW E EE(NPT) 8 1 1/ /4 8 1/2 3/ / / /4 12 3/ / /4 14 3/4 1 1/4 BORE F G J K L MR 8 3/ /2 9/16 1 1/2 1 3/ /4 2 1/4 2 11/16 2 1/8 1 5/8 12 3/4 2 1/4 2 11/16 2 1/4 2 1/8 14 3/4 2 3/4 2 1/4 3/4 2 1/2 2 3/8 14
17 MP2 ø8 ~ 14 WITH DOUBLE DETACHABLE REAR CLEVIS ØMM SM LB P XD 8 1 3/ /8 2 1/4 7/8 2 13/16 5 7/8 3 1/ /4 1 1/ /8 1 1/8 3 1/16 5 7/8 3 1/4 9 1/ / / /8 1 1/4 3 3/16 5 7/8 3 1/4 9 3/ /2 1 7/ /2 1 1/2 3 7/16 5 7/8 3 1/4 9 5/ /4 1 1/ /8 1 1/8 3 1/8 7 1/8 4 1/8 11 1/ / / /8 1 1/4 3 1/4 7 1/8 4 1/8 11 1/ /2 1 7/ /2 1 1/2 3 1/2 7 1/8 4 1/8 11 1/ / / /8 1 1/4 3 1/4 7 5/8 4 5/8 11 7/ /2 1 7/ /2 1 1/2 3 1/2 7 5/8 4 5/8 12 1/ / / /2 1 1/2 3 1/2 7 5/8 4 5/8 12 1/ /2 1 7/ /2 1 1/2 3 13/16 8 7/8 5 1/2 13 5/ / / /2 1 1/2 3 13/16 8 7/8 5 1/2 13 5/ /2 2 1/ / /2 1 1/2 3 13/16 8 7/8 5 1/2 13 5/8 BORE CB CD CW E EE(NPT) 8 1 1/ /4 8 1/2 3/ / / /4 12 3/ / /4 14 3/4 1 1/4 F G J K MR 3/ /2 9/16 1 3/16 3/4 2 1/4 2 11/16 1 5/8 3/4 2 1/4 2 11/16 2 1/8 3/4 2 3/4 2 1/4 3/4 2 3/8 MP3 ø8 ~ 14 WITH CAP FIXED EYE ØMM SM LB P XC 8 1 3/ /8 2 1/4 7/8 2 13/16 5 7/8 3 1/4 8 1/ /4 1 1/ /8 1 1/8 3 1/16 5 7/8 3 1/4 8 1/ / / /8 1 1/4 3 3/16 5 7/8 3 1/4 8 5/ /2 1 7/ /2 1 1/2 3 7/16 5 7/8 3 1/4 8 7/ /4 1 1/ /8 1 1/8 3 1/8 7 1/8 4 1/8 10 3/ / / /8 1 1/4 3 1/4 7 1/8 4 1/8 10 1/ /2 1 7/ /2 1 1/2 3 1/2 7 1/8 4 1/8 10 3/ / / /8 1 1/4 3 1/4 7 5/8 4 5/8 11 1/ /2 1 7/ /2 1 1/2 3 1/2 7 5/8 4 5/8 11 3/ / / /2 1 1/2 3 1/2 7 5/8 4 5/8 11 3/ /2 1 7/ /2 1 1/2 3 13/16 8 7/8 5 1/2 12 7/ / / /2 1 1/2 3 13/16 8 7/8 5 1/2 12 7/ /2 2 1/ / /2 1 1/2 3 13/16 8 7/8 5 1/2 12 7/8 BORE CB CD E EE(NPT) 8 1 1/ /2 3/ / / / / /4 1 1/4 F G J K L MR 3/ /2 9/16 1 1/2 1 3/16 3/4 2 1/4 2 11/16 2 1/8 1 5/8 3/4 2 1/4 2 11/16 2 1/4 2 1/8 3/4 2 3/4 2 1/4 3/4 2 1/2 2 3/8 MP4 ø8 ~ 14 WITH SINGLE DETACHABLE REAR CLEVIS ØMM SM LB P XD 8 1 3/ /8 2 1/4 7/8 2 13/16 5 7/8 3 1/ /4 1 1/ /8 1 1/8 3 1/16 5 7/8 3 1/4 9 1/ / / /8 1 1/4 3 3/16 5 7/8 3 1/4 9 3/ /2 1 7/ /2 1 1/2 3 7/16 5 7/8 3 1/4 9 5/ /4 1 1/ /8 1 1/8 3 1/8 7 1/8 4 1/8 11 1/ / / /8 1 1/4 3 1/4 7 1/8 4 1/8 11 1/ /2 1 7/ /2 1 1/2 3 1/2 7 1/8 4 1/8 11 1/ / / /8 1 1/4 3 1/4 7 5/8 4 5/8 11 7/ /2 1 7/ /2 1 1/2 3 1/2 7 5/8 4 5/8 12 1/ / / /2 1 1/2 3 1/2 7 5/8 4 5/8 12 1/ /2 1 7/ /2 1 1/2 3 13/16 8 7/8 5 1/2 13 5/ / / /2 1 1/2 3 13/16 8 7/8 5 1/2 13 5/ /2 2 1/ / /2 1 1/2 3 13/16 8 7/8 5 1/2 13 5/8 BORE CB CD E EE(NPT) 8 1 1/ /2 3/ / / / / /4 1 1/4 F G J K MR 3/ /2 9/16 1 3/16 3/4 2 1/4 2 11/16 1 5/8 3/4 2 1/4 2 11/16 2 1/8 3/4 2 3/4 2 1/4 3/4 2 3/8 15
18 MS1 ø8 ~ 14 WITH FOOT MOUNT BORE ROD KK A B V W Y ØMM SM 8 1 3/ /8 2 1/4 7/8 2 13/ /4 1 1/ /8 1 1/8 3 1/ / / /8 1 1/4 3 3/ /2 1 7/ /2 1 1/2 3 7/ /4 1 1/ /8 1 1/8 3 1/ / / /8 1 1/4 3 1/ /2 1 7/ /2 1 1/2 3 1/ / / /8 1 1/4 3 1/ /2 1 7/ /2 1 1/2 3 1/ / / /2 1 1/2 3 1/ /2 1 7/ /2 1 1/2 3 13/ / / /2 1 1/2 3 13/ /2 2 1/ / /2 1 1/2 3 13/16 BORE AB AH AL AO AT E EE(NPT) F G J K S ADD STROKE LB P SA 8 13/16 4 1/4 1 13/16 11/16 1/4 8 1/2 3/4 3/ /2 9/16 7 1/8 5 7/8 3 1/4 8 3/ /16 5 5/16 2 1/8 7/8 1/4 10 5/8 1 3/4 2 1/4 2 11/16 8 7/8 7 1/8 4 1/8 10 5/ /16 6 3/8 2 1/8 7/8 3/8 12 3/4 1 3/4 2 1/4 2 11/ /8 4 5/8 11 1/ /16 7 3/8 2 7/16 2 7/16 3/8 14 3/4 1 1/4 3/4 2 3/4 2 1/4 3/4 12 5/8 8 7/8 5 1/2 13 MS2 ø8 ~ 14 WITH SIDE LUG BORE ROD KK A B V W XS Y (MM) SM 8 1 3/ /8 2 1/4 7/8 2 5/ / /4 1 1/ /8 1 1/8 2 9/16 3 1/ / / /8 1 1/4 2 11/16 3 3/ /2 1 7/ /2 1 1/2 2 15/18 3 7/ /4 1 1/ /8 1 1/8 2 3/4 3 1/ / / /8 1 1/4 2 7/8 3 1/ /2 1 7/ /2 1 1/2 3 1/8 3 1/ / / /8 1 1/4 2 7/8 3 1/ /2 1 7/ /2 1 1/2 3 1/8 3 1/ / / /2 1 1/2 3 1/8 3 1/ /2 1 7/ /2 1 1/2 3 3/8 3 13/ / / /2 1 1/2 3 3/8 3 13/ /2 2 1/ / /2 1 1/2 3 3/8 3 13/16 BORE E EE(NPT) F G J K SB ST TS US ADD STROKE LB P SS 8 8 1/2 3/4 3/ /2 9/16 13/ /8 11 1/4 5 7/8 3 1/4 3 3/ /8 1 3/4 2 1/4 2 11/16 1 1/16 1 1/4 12 3/8 14 1/8 7 1/8 4 1/8 4 5/ /4 1 3/4 2 1/4 2 11/16 11/16 1 1/4 14 1/2 16 1/4 7 5/8 4 5/8 5 1/ /4 1 1/4 3/4 2 3/4 2 1/4 3/4 1 5/16 1 1/ /4 8 7/8 5 1/2 5 7/8 MS3 ø8 ~ 14 WITH CENTERLINE LUG BORE ROD KK A B V W XS Y (MM) SM 8 1 3/ /8 2 1/4 7/8 2 5/ / /4 1 1/ /8 1 1/8 2 9/16 3 1/ / / /8 1 1/4 2 11/16 3 3/ /2 1 7/ /2 1 1/2 2 15/18 3 7/ /4 1 1/ /8 1 1/8 2 3/4 3 1/ / / /8 1 1/4 2 7/8 3 1/ /2 1 7/ /2 1 1/2 3 1/8 3 1/ / / /8 1 1/4 2 7/8 3 1/ /2 1 7/ /2 1 1/2 3 1/8 3 1/ / / /2 1 1/2 3 1/8 3 1/ /2 1 7/ /2 1 1/2 3 3/8 3 13/ / / /2 1 1/2 3 3/8 3 13/ /2 2 1/ / /2 1 1/2 3 3/8 3 13/16 BORE E EE(NPT) F G J 8 8 1/2 3/4 3/ / /8 1 3/4 2 1/ /4 1 3/4 2 1/ /4 1 1/4 3/4 2 3/4 2 1/4 K SB ST TS US 9/16 13/ /8 11 1/4 11/16 1 1/16 1 1/4 12 3/8 14 1/8 11/16 11/16 1 1/4 14 1/2 16 1/4 3/4 1 5/16 1 1/ /4 ADD STROKE LB P SS 5 7/8 3 1/4 3 3/4 7 1/8 4 1/8 4 5/8 7 5/8 4 5/8 5 1/8 8 7/8 5 1/2 5 7/8 16
19 MS4 ø8 ~ 14 SIDE-TAPPED BORE ROD KK A B V W XT Y (MM) SM 8 1 3/ /8 2 1/4 7/8 2 13/ / /4 1 1/ /8 1 1/8 3 1/16 3 1/ / / /8 1 1/4 3 3/16 3 3/ /2 1 7/ /2 1 1/2 3 7/16 3 7/ /4 1 1/ /8 1 1/8 3 1/8 3 1/ / / /8 1 1/4 3 1/4 3 1/ /2 1 7/ /2 1 1/2 3 1/2 3 1/ / / /8 1 1/4 3 1/4 3 1/ /2 1 7/ /2 1 1/2 3 1/2 3 1/ / / /2 1 1/2 3 1/2 3 1/ /2 1 7/ /2 1 1/2 3 13/ / / / /2 1 1/2 3 13/ / /2 2 1/ / /2 1 1/2 3 13/ /16 BORE E EE(NPT) F G J K ND NT TN 8 8 1/2 3/4 3/ /2 9/16 1 1/8 3/ / /8 1 3/4 2 1/4 2 11/16 1 1/ / /4 1 3/4 2 1/4 2 11/16 1 1/ / /4 1 1/4 3/4 2 3/4 2 1/4 3/4 1 7/8 1 1/ /8 ADD STROKE LB P SN 5 7/8 3 1/4 3 1/4 7 1/8 4 1/8 4 1/8 7 5/8 4 5/8 4 5/8 8 7/8 5 1/2 5 1/2 MS7 ø8 ~ 14 WITH FRONT LUG MOUNT BORE ROD KK A B V W Y (MM) SM 8 1 3/ /8 2 1/4 7/8 2 13/ /4 1 1/ /8 1 1/8 3 1/ / / /8 1 1/4 3 3/ /2 1 7/ /2 1 1/2 3 7/ /4 1 1/ /8 1 1/8 3 1/ / / /8 1 1/4 3 1/ /2 1 7/ /2 1 1/2 3 1/ / / /8 1 1/4 3 1/ /2 1 7/ /2 1 1/2 3 1/ / / /2 1 1/2 3 1/ /2 1 7/ /2 1 1/2 3 13/ / / /2 1 1/2 3 13/ /2 2 1/ / /2 1 1/2 3 13/16 BORE E EB EE(NPT) EL EO ES 8 8 1/2 11/16 3/4 1 1/8 5/8 2 1/ /8 13/ /16 5/8 2 3/ /4 13/ /16 5/8 3 1/ /4 15/16 1 1/4 1 1/2 3/4 4 ET F G J K 2 1/32 3/ /2 9/ /16 3/4 2 1/4 2 11/16 3 5/16 3/4 2 1/4 2 11/ /16 3/4 2 3/4 2 1/4 3/4 R ADD STROKE LB P SE /8 3 1/4 7 3/ /8 4 1/ /8 4 5/8 9 1/ /8 5 1/2 11 1/8 MT1 ø8 ~ 14 WITH HEAD TRUNNION BORE ROD KK A B V W XG Y (MM) SM 8 1 3/ /8 2 1/4 7/8 2 5/8 2 13/ /4 1 1/ /8 1 1/8 2 7/8 3 1/ / / /8 1 1/ / /2 1 7/ /2 1 1/2 3 1/4 3 7/ /4 1 1/ /8 1 1/ / / / /8 1 1/4 3 1/8 3 1/ /2 1 7/ /2 1 1/2 3 3/8 3 1/ / / /8 1 1/4 3 1/8 3 1/ /2 1 7/ /2 1 1/2 3 3/8 3 1/ / / /2 1 1/2 3 3/8 3 1/ /2 1 7/ /2 1 1/2 3 5/8 3 13/ / / /2 1 1/2 3 5/8 3 13/ /2 2 1/ / /2 1 1/2 3 5/8 3 13/16 BORE E EE(NPT) F G J 8 8 1/2 3/4 3/ / /8 1 3/4 2 1/ /4 1 3/4 2 1/ /4 1 1/4 3/4 2 3/4 2 1/4 K TD TL UT 9/ /8 11 1/4 11/ /4 14 1/8 11/ /4 16 1/4 3/ /4 ADD STROKE LB P 5 7/8 3 1/4 7 1/8 4 1/8 7 5/8 4 5/8 8 7/8 5 1/2 17
20 MT2 ø8 ~ 14 WITH REAR TRUNNION BORE E EE(NPT) F G J 8 8 1/2 3/4 3/ / /8 1 3/4 2 1/ /4 1 3/4 2 1/ /4 1 1/4 3/4 2 3/4 2 1/4 BORE K TD TL UT 8 9/ /8 11 1/ / /4 14 1/ / /4 16 1/4 14 3/ /4 (MM) SM LB P XJ 8 1 3/ /8 2 1/4 7/8 2 13/16 5 7/8 3 1/ /4 1 1/ /8 1 1/8 3 1/16 5 7/8 3 1/4 6 1/ / / /8 1 1/4 3 3/16 5 7/8 3 1/4 6 3/ /2 1 7/ /2 1 1/2 3 7/16 5 7/8 3 1/4 6 5/ /4 1 1/ /8 1 1/8 3 1/8 7 1/8 4 1/8 7 1/ / / /8 1 1/4 3 1/4 7 1/8 4 1/8 7 3/ /2 1 7/ /2 1 1/2 3 1/2 7 1/8 41/8 7 5/ / / /8 1 1/4 3 1/4 7 5/8 4 5/8 7 7/ /2 1 7/ /2 1 1/2 3 1/2 7 5/8 4 5/8 8 1/ / / /2 1 1/2 3 1/2 7 5/8 4 5/8 8 1/ /2 1 7/ /2 1 1/2 3 13/16 8 7/8 5 1/2 9 1/ / / /2 1 1/2 3 13/16 8 7/8 5 1/2 9 1/ /2 2 1/ / /2 1 1/2 3 13/16 8 7/8 5 1/2 9 1/4 MT4 ø8 ~ 14 WITH CENTER TRUNNION /2 (MM) SM XI 8 1 3/ /8 2 1/4 7/8 2 13/ /4 1 1/ /8 1 1/8 3 1/ / / /8 1 1/4 3 3/ /2 1 7/ /2 1 1/2 3 7/ /4 1 1/ /8 1 1/8 3 1/ / / /8 1 1/4 3 1/ /2 1 7/ /2 1 1/2 3 1/ / / /8 1 1/4 3 1/ /2 1 7/ /2 1 1/2 3 1/ / / /2 1 1/2 3 1/ /2 1 7/ /2 1 1/2 3 13/ / / /2 1 1/2 3 13/ /2 2 1/ / /2 1 1/2 3 13/ BORE BD E EE(NPT) F G 8 2 1/2 8 1/2 3/4 3/ /8 1 3/4 2 1/ /4 1 3/4 2 1/ /2 14 3/4 1 1/4 3/4 2 3/4 BORE J K TD TL TM 8 1 1/2 9/ /8 9 3/ / / / / /4 3/ /4 BORE UM UV ADD STROKE LB P /2 9 1/2 5 7/8 3 1/ /2 11 3/4 7 1/8 4 1/ /2 13 3/4 7 5/8 4 5/ / /8 5 1/2 18
21 MX1/MX2/MX3 ø8 ~ 14 WITH EXTENDED TIE-RODS BORE ROD KK A B V W Y (MM) SM 8 1 3/ /8 2 1/4 7/8 2 13/ /4 1 1/ /8 1 1/8 3 1/ / / /8 1 1/4 3 3/ /2 1 7/ /2 1 1/2 3 7/ /4 1 1/ /8 1 1/8 3 1/ / / /8 1 1/4 3 1/ /2 1 7/ /2 1 1/2 3 1/ / / /8 1 1/4 3 1/ /2 1 7/ /2 1 1/2 3 1/ / / /2 1 1/2 3 1/ /2 1 7/ /2 1 1/2 3 13/ / / /2 1 1/2 3 13/ /2 2 1/ / /2 1 1/2 3 13/16 BORE AA BB DD E EE(NPT) /16 5/ /2 3/ /16 3/ / /16 3/ / /16 7/ /4 1 1/4 F G J K R 3/ /2 9/ /4 2 1/4 11/ /4 2 1/4 2 11/ /4 2 3/4 2 1/4 3/ ADD STROKE LB P 5 7/8 3 1/4 7 1/8 4 1/8 7 5/8 4 5/8 8 7/8 5 1/2 NCA1W ø1.5 ~ 6 DOUBLE ROD ØMM SM LD P 1 1/2 5/8 7/ / /4 5/8 1 15/ /8 1 1/2 1 3/ / / / /8 2 5/8 7/ / /4 5/8 1 15/ / / / / / / / /8 2 5/8 1 1/4 2 9/ /8 2 1/2 5/8 7/ / /4 5/8 1 15/ /8 2 1/2 1 3/ / / / /8 2 1/2 1 3/ /8 2 5/8 1 1/4 2 9/ /8 3 1/4 1 3/ / /4 3/4 2 3/8 5 7/8 2 5/8 3 1/4 1 3/ /8 2 3/ /8 5 7/8 2 5/ / / /4 3/4 2 3/8 5 7/8 2 5/ / /8 2 3/ /8 5 7/8 2 5/ / / /4 3/4 2 5/16 5 7/8 2 3/ / /8 2 3/ /16 5 7/8 2 3/ /4 1 1/ /2 1 1/4 2 13/16 5 7/8 2 3/ / /8 2 1/4 7/8 2 13/16 6 7/ /4 1 1/ /8 1 1/8 3 1/16 6 7/ / / /8 1 1/4 3 3/16 6 7/8 3 BORE E EE(NPT) F G J K 1 1/2 2 3/8 3/ / /2 3/8 3/ /16 2 1/2 3 3/8 3/ /8 5/16 3 1/4 3 3/4 1/2 5/8 2 1/4 1 1/4 3/ /2 1/2 5/8 2 1/4 1 1/4 3/ /2 1/2 5/8 2 1/4 1 1/2 7/ /2 3/4 3/4 2 3/4 1 5/8 7/16 NCA1W ø8 ~ 14 DOUBLE ROD BORE ROD KK A B V W Y (MM) SM 8 1 3/ /8 2 1/4 7/8 2 13/ /4 1 1/ /8 1 1/8 3 1/ / / /8 1 1/4 3 3/ /2 1 7/ /2 1 1/2 3 7/ /4 1 1/ /8 1 1/8 3 1/ / / /8 1 1/4 3 1/ /2 1 7/ /2 1 1/2 3 1/ / / /8 1 1/4 3 1/ /2 1 7/ /2 1 1/2 3 1/ / / /2 1 1/2 3 1/ /2 1 7/ /2 1 1/2 3 13/ / / /2 1 1/2 3 13/ /2 2 1/ / /2 1 1/2 3 13/16 19 BORE E EE(NPT) F G J K ADD STROKE LD P 8 8 1/2 3/4 3/ /2 9/16 7 1/8 3 1/ /8 1 3/4 2 1/4 2 11/16 8 1/8 4 1/ /4 1 3/4 2 1/4 2 11/16 8 5/8 4 5/ /4 1 1/4 3/4 2 3/4 2 1/4 3/4 10 1/8 5 1/2
22 Air Cylinder TECHNICAL SPECIFICATIONS CYLINDER BORES AND FORCES: PUSH STROKE Bore Piston Area Forces (lbs); Push Stroke (in) (in) Operating medium Pressure (PSI) To calculate thrust forces not shown in the table, multiply operating pressure by piston area. HOW TO USE THIS TABLE 1 Locate column with desired operating pressure. 2 Move down that column and locate the thrust value which is equal (or the next larger to the force to be delivered by the cylinder.) 3 On that same line, locate in the first (left) column the bore size recommended for your application. Note: These are guide lines only which must be substantiated using additional data specific to your application. CYLINDER BORES AND FORCES: PULL STROKE Piston Piston Forces (lbs); Pull Stroke (Deduct the listed thrusts corresponding Rod Rod to the rod size from push stroke pressure) Diameter Area Operating medium Pressure (PSI) (in) (in) To calculate pull forces not shown in the table, use the following formula: Pull Force = (Piston Area-Rod Area) x Working Pressure HOW TO USE THIS TABLE 1 To find the force on the pull stroke, locate the required piston rod diameter in the left most column. 2 Moving to the right, locate the required working pressure 3 Deduct the value shown at the intersection from the push stroke force value determined from the Push Stroke table. The resultant is the available pull stroke table. OVERSIZE PISTON RODS - Selection Table - Thrust In Piston Rod Diameter lbs 5/ /8 1 3/ / / Oversized Piston Rods In applications where extra column strength is required, or for long push stroke cylinders, oversized piston rods may be required. It must be noted, however, that oversized piston rods transmit more side load than is the case with more flexible smaller rods; therefore, the use of oversized rods should not be considered a remedy against excessive side loads. HOW TO USE THIS TABLE 1 From Stroke Factors Table (see Table 1 on page 21), determine the value of L. 2 In the left table, locate the previously determined thrust value. 3 Moving across the table, locate dimension L (If the exact length is not shown, select the next larger value) 20
23 Technical Specifications STROKE FACTORS FOR VARIOUS MOUNTING STYLES TABLE 1 Cylinder Mounting Rod End Connection Stroke Factor Side-Tapped, Head or Cap Flange, Tie-Rod, Center or Side Lug Side-Tapped, Head or Cap Flange, Tie-Rod, Center or Side Lug Side-Tapped, Head or Cap Flange, Tie-Rod, Center or Side Lug Side-Tapped, Head or Cap Flange, Tie-Rod, Center or Side Lug Fixed and Rigidly Guided Pivot and Rigidly Guided Supported but not Rigidly Guided None STOP TUBE REQUIREMENTS / TABLE 2 L (in) Tube Length (in) Head Trunnion Center Trunnion Cap Trunnion or Clevis Pivoted and Rigidly Guided Pivoted and Rigidly Guided Pivoted and Rigidly Guided Stop Tubes are used for reducing piston and bearing loads on to prevent buckling and jack-knifing of horizontally installed long push stroke cylinders when the piston rod is fully extended. How to use this table 1 Multiply Cylinder Stroke by Stroke Factor for appropriate mounting style to obtain Effective Length L. 2 If Cylinder has extra rod extension, add length of extension to stroke length prior to obtaining Effective Length L. Example: NCDA1L XTATCDN 8 Bore 60 Stroke MS1 Mount Supported but not rigidly guided 1) From Table 1, determine Stroke Factor (SF) ~ Stroke Factor 2.0 2) Determine Effective Length L L = Stroke x Stroke Factor = 60 x 2.0 = 120 inches 3) From Table 2, determine Stop Tube Requirements ~ Find L length and note Stop Tube length Stop Tube Length = 8 21
24 Engineering Specifications O P T I O N S M OUNTING B RACKETS FOR S WITCHES O P T I O N S A UTO S WITCHES - REED T YPE MODEL OPERATING MAX CURRENT OR INDICATOR O P T I O N S A UTO S WITCHES - SOLID S TATE T YPE MODEL OPERATING MAX CURRENT OR INDICATOR MODEL BT-12 BT-18A BORE SIZE 500 (5 Bore) 600 (6 Bore) 800 (8 Bore) NUMBER VOLTAGE OPERATING CURRENT LIGHT / WIRE RANGE (MA) OUTPUT D-A53 24VDC 5~20MA YES 24VDC 5~20MA NUMBER VOLTAGE OPERATING CURRENT LIGHT / WIRE RANGE (MA) OUTPUT D-F59 28VDC OR LESS 150MA 3 WIRE (NPN) D-F5P - 100MA 3 WIRE (PNP) BT (10 Bore) 1200 (12 Bore) D-A54 100VAC 5~25MA YES 200VAC 5~12.5MA D-A56 4~8VDC 20MA YES D-J59 24VDC 5~150MA 2 WIRE (10~28VDC) D-F59W 28VDC 80MA 3 WIRE (NPN) D-A59W 24VDC 5~40MA YES 24VAC/DC 50MA D-A64 100VAC 25MA - 200VAC 12.5MA D-A67 24VDC 30MA - D-F59PW - 80MA 3 WIRE (PNP) D-J59W 24VDC 5~40MA 2 WIRE (10~28VDC) D-F5BAL 24VDC 5~40MA 2 WIRE (NPN) (10~28VDC) D-F59F 28VDC 40MA 4 WIRE (NPN) D-F5NTL 28VDC 80MA 3 WIRE (NPN) THREAD FORM CODE S PECIAL R OD T HREAD - XA O PTION IMPERIAL Code : Thread Form 00 : None (No reduction in piston rod diameter) 01 : : : : : : : : : : : : : 1/ : 1/ : 5/ : 5/ : 3/ : 3/ : 7/ : 7/ : 1/ : 1/ : 9/ : 9/ : 5/ : 5/8-18 NCA1 Mounting Stroke Suffix Auto Switch XA 27 M Code : Thread Form 27 : 3/ : 3/ : 7/ : 7/ : : : 1 1/ : 1 1/ : 1 1/ : 1 1/ : 1 3/ : 1 3/ : : 1 1/ : 1 1/ : : 3/ : 2 1/ : : 2 1/ : 1 7/ : 2 3/ : : 3 1/ : 3 1/ : 1 3/ : 1 3/ :1 7/8-12 Bore - - METRIC Code : Thread Form 60 : M3 x : M3 x : M4 x : M4 x : M5 x : M5 x : M6 x : M6 x : M8 x : M8 x : M10 x : M10 x : M12 x : M12 x : M14 x : M14 x : M16 x : M16 x : M18 x : M18 x : M20 x : M20 x : M22 x : M22 x : M24 x : M24 x : M26 x : M30 x 1.5 Thread Form Code M... Male Rod End F... Female Rod End METRIC Code B... No Thread : Thread Form 88 : M14 x : M20 x : M12 x : M42 x : M24 x : M30 x : M36 x : M16 x : M36 x : M36 x 2.0 This chart represents all current thread codes and are not all applicable to NCA1 due to rod size limitations. Male threads cannot be specified equal to, but not, greater than the rod diameters as standard. FEMALE ROD DIAMETER BORE (INCH) 150 (1.5 ) 200 (2 ) 250 (2.5 ) 325 (3.25 ) 400 (4 ) MM 5/8 5/8 5/8 1 1 KK 7/ / / /4-20 3/4-20 A 3/4 3/4 3/4 1 1/8 1 1/8 B 1 1/8 1 1/8 1 1/8 1 1/2 1 1/2 C 3/8 3/8 3/8 1/2 1/2 WF /8 1 3/8 22
25 Air Cylinder PARTS BREAKDOWN Extended Series NCA1 O P T I O N S S ERIES NCA1 - XC3 OPTION NCDA1L XC3 A B E F TAT Head Cover Port Location A, B, C or D Head Cover Cushion Location A, B, C or D (Port Location Standard) A H E (Port Location Standard) CAP END F (Cushion Location Standard) Cap Cover Port Location E, F, G or H Cap Cover Cushion Location E, F, G or H D G HEAD END C B (Cushion Location Standard) CHART 1 Spare Parts and Repair Kit Item Quantity Description 11 1 Head 12 1 Cap 13 1 Barrel 14* 2 Barrel Seal 15 4 Tie Rods 16 4 Tie Rod Nuts 21 1 Piston (See Note1) 22 1 Piston Rod (See Note1) 24* 2 Piston Packings 26A 1 Piston Rod Assembly (See Note1) 28 1 Wear Band 31 1 Gland Bushing 32* 1 Gland Packing 33* 1 Gland Packing Backup 34* 1 Gland Seal 35* 1 Gland Seal Backup 41* 1 Rod Wiper 44 1 Magnet 51* 2 Cushion Packing 52 2 Cushion Backup 53 2 Cushion Spring 54 2 Cushion Retainer 55* 2 Adjustable Cushion Assembly 67 1 Cushion Seat 87 1 Head Flange * Denotes Included in Service Kit Note 1) Piston Rod and Piston are not sold separately. Please order Item No 26A Piston Rod Assembly. H O W T O O R D E R S ERIES NCA1 SEAL K IT NCA PS - S TYLE - Single Rod W Double Rod For information on Bore Size, Rod ø and Rod Thread ø, please see How To Order Series NCA1 Replacement Parts. O PTIONS ( IF APPLICABLE) XB5 _ G 1 3/8 H 1 3/4 J 2 K 2 1/2 L 3 M 3 1/2 XB6 HIGH T EMPERATURE H O W T O O R D E R S ERIES NCA1 REPLACEMENT PARTS NC D A M AGNET (if applicable) M OUNTING S TYLE Item No from CHART 1 to reference Part required B ORE S IZE R OD Ø R OD T HREAD Ø /8 7/ /8 7/ /8 7/ / / / / / / /2 1 1/ / /8-12 R EFER TO PAGE 22 FOR O PTIONAL R OD T HREADS CONSTRUCTION DETAILS XTAT Aluminum Tube XTST Steel Tube Construction XTSS Stainless Steel Construction XTSCT.. Steel w/ composite tube XTACT...Composite tube XTSSCT...Stainless steel w/ composite tube S TROKE Only necessary for Item No 13, 15 and 26A 23
HEAVY DUTY PNEUMATIC
HEAVY DUTY PNEUMATIC Series A4 MEDIUM DUTY HYDRAULIC Series H4 PERMANENTLY LUBRICATED HEAVY DUTY PNEUMATIC Series L4 586.778.7680 SERIES A4/L4/H4 39 A4/L4/H4 FEATURES 1 1 9 9 12 8 7 5 12 3 13 4 10 2 11
FULL COLOR TAB #8 RS, SS, SS-MS
FULL COLOR TAB #8 RS, SS, SS-MS 128 RS - How to Order REPAIRABLE STAINLESS STEEL RS : CONSTRUCTION RS - Base RS - Mount OPTIONAL: MPR MAGNETIC PISTON RS - 1 2 3 4 5 6 USDA APPROVAL OPTION U - EQUIPMENT
AT SERIES. Dart Valve Actuator. Thrusts up to 55,000 lbs SIL-3 Capable GT3 Triple Seal Gland for Severe Service Applications
Actuation Solutions and Systems for the World s Most Challenging Environments AT SERIES Dart Valve Actuator Durable, Accurate, Compact, Modular Thrusts up to 55,000 lbs SIL-3 Capable GT3 Triple Seal Gland
NZ Series Heavy Duty NFPA Tie Rod Cylinders. Series NZ Cylinder NFPA Interchangeable Nominal Pressure: 3000 Psi [210 Bar]
![NZ Series Heavy Duty NFPA Tie Rod Cylinders. Series NZ Cylinder NFPA Interchangeable Nominal Pressure: 3000 Psi [210 Bar]](/thumbs/76/73428061.jpg "NZ Series Heavy Duty NFPA Tie Rod Cylinders. Series NZ Cylinder NFPA Interchangeable Nominal Pressure: 3000 Psi [210 Bar]")
NZ Series Heavy Duty NFPA Tie Rod ylinders Series NZ ylinder NFPA Interchangeable Nominal Pressure: 3000 Psi [210 ar] Disclaimer and Warning USR RSPONSIILITY - IMPROPR SLTION, US OR MAINTNAN OF TH SYSTM,
NZ Series Heavy Duty NFPA Tie Rod Cylinders Catalog. Series NZ
NZ Series Heavy Duty NFPA Tie Rod ylinders atalog Series NZ Disclaimer and Warning USR RSPONSIILITY - IMPROPR SLTION, US OR MAINTNAN OF TH SYSTM, PRODUTS OR OMPONNTS DSRID IN THIS ATALOG MAY AUS OR RSULT
JIS Standard Hydraulic Cylinder
IS Standard ydraulic ylinder E/// Series Q E Series N M S Nominal pressure: 3.5 elated MPa D- :,,,,, Series Nominal pressure: MPa :,,,,, / Series Nominal pressure: MPa :,,,,, 3.5 MPa MPa MPa IS Standard
HEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The (SER.22) model knife gate is a bi-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The completely new
Pilot Check Valve: Metal Body Type
INFORMATION Pilot Check Valve: Metal Body Type The use of a metal body improves strength and environmental resistance. Temporary intermediate stops are possible. *1 *1 Precise intermediate stops are not
REPAIR PART NUMBER NUMBER DESCRIPTION 0137 ELE 0136 ELE 12 VOLT SOLENOID
PART REPAIR PART NUMBER NUMBER DESCRIPTION 0137 ELE 0136 ELE 12 VOLT SOLENOID 0203 WHL 0250 WHL WHEEL HUB 0251 WHL AXLE 0252 WHL DUST CAPS 0253 WHL TIRE - 210 SP 0204 WHL 0211 WHL TIRE & WHEEL - SP 0250
Air Operated Hydraulic Pumping Systems to 50,000 psi
High Pressure Equipment Air Operated Hydraulic Pumping Systems to 50,000 psi PS-10: 10,000 psi PS-20: 20,000 psi PS-30: 30,000 psi PS-40: 40,000 psi PS-50: 50,000 psi PS-90: 90,000 psi High Pressure air
shutoff valves 900 Series psig Manual Shutoff Valves
0 6000 psig Manual Shutoff Valves Features Zero leakage Protected o-ring Full flow passages Freedom from wire drawing Panel mount standard Hand wheel or toggle handle How it Works Closed O-ring seal on
Air Saving Valve reduction in 40% air consumption 40% air consumption Air consumption reduction ratio (%) Flow valve Flow valv
CAT.ES-173 A Air Saving Valve % reduction in air consumption Cuts air consumption by operating the return stroke at a reduced pressure. valve Pressure Air consumption reduction ratio (%) 3 1.1.1...3 pressure
SDM to 8 sections monoblock valve D1WWDA02A
SDM 1 SDM1 1 to 8 sections monoblock valve D1WWDA2A SDM1 Additional information This folder shows the product in the most standard configurations. Please contact Sales Dpt. for more detailed information
M9N. Nil. s n. Type of auto switch. Refer to the table below for auto switch part numbers.
eries XP/XP ir slide table ø, ø1, ø12, ø1 ow to Order lean series 11 acuum suction type 11 XP 12 1 9N 22 XP 12 1 9N opper, fluorine and silicon-free + low particle generation 22 acuum suction type ore
New Models! UX.1600 UX.20000
atalog No. 07105 Ultra Force Extended UX eries New Models! UX.1600 UX.000 Patent pending Reduce die construction costs ong stroke lengths Directly upgrade IO 750-10000 models Variety of attachable and
Bores: ø 10, 16, 20, 25, 32 mm
> Series CGLN wide opening parallel grippers CATALOGUE > Release 8.8 Series CGLN wide opening parallel grippers New version Bores: ø 0, 6, 20, 25, 32 mm»» High installation versatility»» Rack and pinion
Related Products: Auto Drain Valve. Model/Specifications. Model
Related Products: Auto Drain Valve /600 Drainage is automatically discharged in a reliable manner, without requiring human operators. Highly resistant to dust and corrosion, operates reliably, and a bowl
Inline Swivels Switch Your Swivel!
Inline Swivels Switch Your Swivel! HOW TO ORDER BODY OPTIONS 9 SS 8 FP 50 X FP 50 Z - V SS-SINGLE PLANE DP- DUAL PLANE SERIES ( ) THREAD SIZE MULTIPLES OF 100 FOR N.P.T.F. MULTIPLES OF 16 FOR J.I.C., O.R.B.
SITRANS P measuring instruments for pressure
SITRANS P measuring instruments for pressure Z series for gage pressure Siemens AG 008 Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and
4/2 way Pneumatic Solenoid Valve
4/2 way Pneumatic Solenoid Valve Compact design Push-over solenoid coil Exhaust air can be regulated Tube, threaded and sub-base connections Type combined with Seat valve version Type 2508 Type 2510/11
Wide opening parallel grippers Series CGLN
CATALOGUE > s 202 Wide opening parallel grippers Series CGLN > Grippers Series CGLN Magnetic Sizes: ø 0-6 - 20-25 - 32 mm» High flexibility during mounting» High grip force» Rack and pinion synchronized
42 Series. Pneumatic. Lever / Pedal Valves 4-Way, 5-Port, 2 & 3-Position. Section Q. Pneumatic
42 eries Lever / edal Valves 4-Way, -ort, 2 & -osition ection asic Valve unctions...2 42 eries asic Valve eatures... ommon art Numbers...4 odel Number Index... tacking anifold ystems...6 imensions Lever
UCA2 Series. Bore size: 10, 16, 25, 32. UCA2 UCA2-L (with switch) Double acting Compressed air to 60 (no freezing)
SCP* CMK CM SC CKV C/OV CT MDC SMD JSK/M U STR SRL SM RCC Specifications Descriptions Bore size mm ctuation Working fluid Max. working pressure MPa Min. working pressure MPa Withstanding pressure MPa mbient
SATURNSERIES INTERCHANGE > ISO (for the couplings)
Saturn Block INTERCHANGE > ISO 16028 (for the couplings) PATENTED ISO 16028 TECHNICAL FEATURES AND OPTIONS Interchange ISO 16028 (for the couplings) Sealing description Nitrile NBR Connection system Push
Air Saving Valve. Pressure Valve Flow Valve
Air Saving Valve Series Series Pressure Valve Flow Valve % reduction in air consumption Cuts air consumption by operating the return stroke at a reduced pressure. valve Pressure Air consumption reduction
Gas powered stop valves, type GPLX REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Gas powered stop valves, type GPLX 80-150 REFRIGERATION AND AIR CONDITIONING Technical leaflet Technical leaflet Gas powered stop valves, type GPLX 80-150 Contents Page Introduction........................................................................................3
Data Sheet B-Series Switches Pressure, Differential Pressure & Hydraulic
Data Sheet FEATURES Adjustable setpoints 15-100% of range Fixed or limited adjustable deadband Wide selection of switch elements Explosion proof enclosure provides uncompromising protection Special designs
Technical Data Sheet T 2025
Self-operated emperature Regulators emperature Regulator ype 4 Valve closes when the temperature rises. emperature Regulator ype 4u Valve opens when the temperature rises. Balanced single-seated globe
Data Sheet B-Series Switches Pressure, Differential Pressure & Hydraulic
FEATURES Adjustable setpoints 15-100% of range Fixed or limited adjustable deadband Wide selection of switch elements Explosion proof enclosure provides uncompromising protection Special designs for NACE
Directional Valves. Hydraulic Operated Directional Valves
Service Data Vickers Directional Valves Hydraulic Operated Directional Valves (F*) DG3V 8 (B) ** (L) (X) (*) (*) 10 (EN**) Released 04/96 5007.03/EN/0496/S DG3V-8-*(C) - (X) - 10 Spring Centered 473726
DI-DRO ADVANCED FORMING SYSTEMS
DI-DRO ADVANCED FORMING SYSTEMS WE PARTNER WITH YOU We partner with you to provide force-generating products and solutions to lower your costs and increase your productivity in the forming of manufactured
Air Saving Valve. Series ASQ. Series ASR. Pressure Valve. Flow valve TMH ASD AS AS-FG AS-FP AS-FM ASP ASN AQ ASV AK VCHC ASS. r r AS-FE KE 10 0.
Air Saving Valve Series R Pressure Valve Series Q Flow Valve P r.9.7 2..3.1 D -FE KE -FG -FP -FM.1.2.2.3 pressure (MPa) -D -T P ow valve Fl N AQ V e n by o i t p nsum n stroke o c r i r a Cuts g the retu
DICTATOR "DIREKT" Gate Closer
DICTATOR "DIREKT" Gate Closer For Access Gates in Boundary Fences The DICTATOR gate closer DIREKT is the economic solution for the controlled closing of outside gates, such as admission gates to kinder
KEYSTONE. A C E C O E n v i r o n m e n t a l C o m p a n y. Bulletin 10-B
KEYSTONE Filtration Solutions A C E C O E n v i r o n m e n t a l C o m p a n y Bulletin 10-B Standard Housings The 11N, 21N and 23N filter housings are tested and certified by NSF International under
Inline & 90 Swivels. Hydraulic Live Swivels. Heavy Duty Ball Bearing, Rebuildable Design
Hydraulic Live Swivels Available In BSPP Inline & 90 Swivels Heavy Duty Ball Bearing, Rebuildable Design www.superswivels.com 763-784-5531 Email: sales@superswivels.com Fax: 763-784-7423 M1606.1711 Thousands
Technical Information Ball valves for high pressure applications
Technical Information Ball valves for high pressure applications General Please ensure that the maximum pressure is in complicance with all connexions in the system. Ball valves generally should not be
Inflatable Packer Single & Double. Single & Double Packer Dimension. Wireline Packer. Water Testing Packer (WTP) Packer
Inflatable Packer Single & Double Single & Double Packer Dimension Wireline Packer Water Testing Packer (WTP) Packer Packer Working Pressure & Depth Chart Packer Water Hand Pump Packer Air Driven Pump
Schroeder Check Test Point System
Perforated polyamide / kevlar hose, 2 mm ID, 5 mm OD, plastic dust cap. L in (mm) P (max) psi (bar) 6 (150) 10,000 (680) 12 (300) 10,000 (680) 24 (610) 10,000 (680) 36 (915) 10,000 (680) 48 (1220) 10,000
VP-PSERIES INTERCHANGE > Stucchi profile
VSERES NERHANE > Stucchi profile EHNAL EAURES AN OONS nterchange Stucchi profile Sealing description Nitrile NR onnection system Screw SUH SOLUONS Available sizes from /4 to Material /treatment arbon steel
Rectangular (RPS) Square (SPS) Step Cut (SCP) Material SCP - Step Cut CI - Cast Iron
Ring Materials: Temp. Range 15% Glass filled PTFE -268 to 288 40% ronze filled PTFE -268 to 288 40% Glass Reinforced Nylon -240 to 149 15% Graphite Filled PTFE -72 to 232 15% Glass, 5% Moly Filled PTFE
Up to 7.4 tons of force on contact UltraPak cartridge for long life Operates self-contained or linked
atalog No. 10111 High Force Nitrogen Gas prings UH eries Up to 7.4 tons of force on contact UltraPak cartridge for long life Operates self-contained or linked UH eries Nitrogen Gas prings Introduction
FIK In-Tank Filters FIK. Max Flow: 170 gpm (643 lpm) Working Pressures to: Rated Static Burst to: Flow Range to:
LOW PRESSURE FILTERS Max Flow: gpm ( lpm) In-Tank Filters Working Pressures to: Rated Static Burst to: psi kpa bar psi kpa bar Flow Range to: gpm lpm Features STYLE C STYLE D STYLE E in-tank filters are
VERTICAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Tight Spaces UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
PED 97/23/EC COMPLIANT. Up to 7.4 tons of force on contact UltraPak cartridge for long life Operates self-contained or linked
atalog No. 10111A High Force Nitrogen Gas prings UH eries Up to 7.4 tons of force on contact UltraPak cartridge for long life Operates self-contained or linked PED 97/23/E OMPIANT UH eries Nitrogen Gas
SAILTEC, INC CONGER COURT, OSHKOSH, WI USA
OK to make this valve hand tight. Pin Mount Style Integral lies 4-5 Degrees above Horizontal. If you store your Hunter "bow down" you will get air-lock in the Integral. Slot Mount Style Pump Body "Down"
1/2 to 2-1/2 NPT; 0 to 230 PSI Advantages / Benefits
/-Way Angle-Seat Valve Type 000 to - NPT; 0 to 30 Advantages / Benefits Spring return closed or open, double-acting Materials: bronze, stainless steel High flow rate Self-adjusting packing glands with
Installation Instructions, Pressure Regulator Series
Installation Instructions, Pressure Regulator 20517 Series Manual Model: 20517, L20517 Air motor Operated: F20517, LF20517 Hydraulic Motor Operated: G20517, LG20517 1. GENERAL ------------------------------------------------------------------------------
PNEUMATIC PRESSURE CONTROLLERS
PNEUMATIC PRESSURE CONTROLLERS VARIABLE VOLUME PRESSURE CONTROLLER MODELS: V-1 R AND V-2R The 3D Variable Volume Pressure Controller is available for requirements of 0-1,000 psi and 0-6,000 psi in absolute
Stock Lifters IDEAL FOR IMPROVED PART HANDLING THROUGH GUIDED LIFTING SYSTEMS
tock Lifters IDEAL FOR IMPROVED PART HANDLING THROUGH GUIDED LIFTING YTEM Introduction tock Lifters 2 tock Lifters Introduction IDEAL FOR IMPROVED PART HANDLING THROUGH GUIDED LIFTING YTEM Table of Contents...Page
PVQ 13 A2 R SE 1 S 20 C-11 D
PVQ - Variable Displacement Piston Pump PVQ 13 A2 R SE 1 S 2 C-11 D 1 2 3 4 6 7 8 9 1 1 Model Series PVQ Inline Piston Pump Variable Volume Quiet Series 4 Rotation Viewed from shaft end R Right hand, standard
Pressure Sensing Valve - Model 4023
Pressure Sensing Valve - Model 4023 Overview AMOT Model 4023 can be used as a 2 or 3-way capacity, pressure sensing valve. This valve is ideal for applications that require compressor suction and discharge
L125 SERIES POST-COMPENSATED SECTIONAL LOAD SENSE VALVE
L15 SERIES POST-COMPENSATED SECTIONAL LOAD SENSE VALVE TAKE CONTROL Take control with Muncie Power Products L15 directional control valve. The L15 is constructed with high-grade, iron castings and nickel-plated
HORIZONTAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Low Ceilings UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
One-touch Fittings Manifold. Porting. One-touch fitting. One-touch fitting. One-touch fitting. One-touch fitting. One-touch fitting.
One-touch Fittings Manifold Series KM RoHS Compact piping possible. Manifold piping possible. Many varieties (0 types) are available. s give the most efficient operation. KM1 KM1 orting Rc female thread
Micro grippers HGPM/HGWM
HGPM/HGWM Miniaturised and optimised for assembly tasks Versatile 2004/10 Subject to change Products 2004/2005 1 / 1 HGPM/HGWM Key features HGWM HGPM 1 2 3 4 1 2 3 4 System product for handling and assembly
SB 102. Spare parts list. Hydraulic breakers. SB 102 s/n BES Construction Tools PC AB No h
SB 102 Spare parts list Hydraulic breakers SB 102 s/n BES043603 2018 Construction Tools PC AB No. 9800064201h 2018-01 General information This spare parts list applies to the following: Part number 8460030030
VEP-PSERIES INTERCHANGE > Stucchi VEP profile
VPPSRIS INRHAN > Stucchi VP profile HNIAL AURS AN OPIONS Interchange Stucchi VP profile Sealing description Nitrile NR onnection system Screw SUHI SOLUIONS Available sizes Material /treatment Available
Pressure regulators Manually operated Fine setting valves. Brochure
Pressure regulators Manually operated s Brochure Pressure regulators Manually operated s Qn = 9 l/min Actuating element: Push button Internal thread Poppet valve Qn = 9 l/min Actuating element: Push button
Suggested Installation & Operating Instructions for Sidewinder Pumps
Model 164 C P.O. Box 80769 Lafayette, LA 70598-0769 (337) 235-9838 FAX (337) 235-9852 www.sidewinderpumps.com Pneumatic Powered - Plunger Pump Suggested Installation & Operating Instructions for Sidewinder
Technical Datasheet. D Series SMART Pressure Transmitter Model: DPC D-Series. Key Features. Series Overview. Product applications
Technical Datasheet D Series SMART Pressure Transmitter Model: DPC-2000 Key Features ATEX - Flameproof and Intrinsically Safe IECEx - Flameproof and Intrinsically Safe SIL 2 certificate Compliant to NAMUR
Load Controls Screw In Cartridge Valves Pressures to 350 bar (5000 psi) Flows to 190 l/min (50 USgpm)
Vickers Cartridge Valves Load Controls Screw In Cartridge Valves Pressures to 50 bar (5000 psi) Flows to 90 l/min (50 USgpm) Rev. 2/99 722 Contents MODEL DESCRIPTION TYP. APPLICATION PRESSURE bar (psi)
Sae 4 Bolt Flange Port Dimensions
We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with sae 4 bolt flange port
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS 136 137 TECHNICAL SPECIFICATIONS GROUPSETS 138 SUPER 141 144 CHORUS 146 ATHENA 148 CENTAUR 10 veloce 12 pista 13 TIME TRIAL 14 COMP TRIPLE 1 CX WHEELS 16 Low / High-Profile 18
Directional Control Valves Series VA13 and VA15 3- and 5-port valves, G1/8
Directional Control Valves Series VA13 and VA15 3- and 5-port valves, G1/8 Catalogue 9127003472GB-ul VA13 and VA15 Directional Control Valves Robust 3- and 5-port valves with brass bodies and stainless
2 Overview. SITRANS P measuring instruments for pressure. Transmitters for gage and absolute pressure. Z series for gage pressure
Z series for gage pressure Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and electronics plate Process connection Electrical connection
Flow and check valves Logic valves series 551. Brochure
Flow and check valves Logic valves series 551 Brochure 2 Flow and check valves Logic valves series 551 3/2-directional valve, low pressure operated Qn = 2-120 l/min 3 3/2-directional valve, Qn = 120 l/min
Dean Pump Self-Priming Chemical Process Pumps
Bulletin C 1.2.34.7 Dean Pump Self-Priming Chemical Process Pumps php Series HEAD CAPACITY RANGE CHARTS php Self Primer - 2 Pole 3500 RPM 500 CAPACITY M 3 /HR 2900 RPM 50 HERTZ 25 50 75 125 150 400 TOTAL
Index Table. Model 794. Installation, Operating and Maintenance Instructions
CLOCKWISE MANUAL MAKING INTO CCW TABLE Index Table Model 794 Installation, Operating and Maintenance Instructions Black & Webster Products Division 545 Hupp Ave. P.O. Box 831, Jackson, Michigan 49204 2009
DICTATOR "DIREKT" Gate Closer
DICTATOR "DIREKT" Gate Closer For Access Gates in Boundary Fences The DICTATOR gate closer DIREKT is the economic solution for the reliable and controlled closing of outside gates, such as admission gates
Hand lever valves VHER
Hand lever valves VHER Hand lever valves VHER Key features Powerful Flexible Practical -M- Flow 170 3800 l/min 4/3-way valve mid-position closed mid-position exhausted mid-position pressurised Connections:
Invacare Top End Parts Catalog
Invacare Top End Parts Catalog T Titanium Top End Frames / Standard Parts Pre- July 2009 20 22 0 2 Pre- July 2009 9 2 2 Pre- July 2009 9 2 Titanium Head Tube Assembly see Casters / Forks on pg. 4 4 4 see
MODEL 200 KNIFE GATE VALVES INSTALLATION & MAINTENANCE MANUAL
MODEL 200 KNIFE GATE VALVES INSTALLATION & MAINTENANCE MANUAL Index 1. List of components / General arrangement 2. Description 3. Handling 4. Installation 5. Actuators / Operation 6. Maintenance a. Changing
HL Slides. Transfer and Lift Systems HYDRO-LINE, INC.
ROCKFORD, IL HL Slides Transfer and Lift Systems HYDRO-LINE, INC. PATENTS PENDING OR PATENTED 5263402 5255591 All Rights Reserved. Table of Contents Thank you for using Hydro-Line... We would like to take
Livestock Equipment Bale Movers/ Bale Spears. Tractor Linkage. Grade 5 & 8 Hitch Pins. Tractor Linkage
Hooking a piece of equipment to your tractor? Our selection of hitch pins, locking pins, lift arm/top link parts, PTO adapters will keep things connected. Make sure you have an SMV sign to keep everyone
Calibrated or locked versions available. TREATMENT > Series MD regulators GENERAL DATA. New
> Series MD regulators Series MD pressure regulators New Ports with interchangeable cartridges: threaded (1/8, 1/4, /8) or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm Versions: single,
Clean Speed Controller with One-touch Fitting
Clean Speed Controller with One-touch Fitting Series -FPQ/-FPG -FPG Series -FPQ Series Speed controllers for clean room use S R -FPQ: (electroless nickel plated) and -FPG: are now available as a series.
K0709 Quick-fit couplings
Joints 1067 K0709 Quick-fit couplings with radial offset compensation external thread D1 SW SW1 application example: X max. D D 3 4 internal thread SW 3 4 2 SW1 D D Coupling part and claw in steel. Nut
SB 152. Spare parts list. Hydraulic breakers. SB 152 s/n BES Construction Tools PC AB No
SB 152 Spare parts list Hydraulic breakers SB 152 s/n BES043707 2018 Construction Tools PC AB No. 9800041001 2018-01 General information This spare parts list applies to the following: Part number 8460030040
TONS! powerteam.com HEAVY LIFT CYLINDERS
NEW DESIGNS TONS! powerteam.com HEAVY LIFT CYLINDERS THE Precise MOST Positioning COMPREHENSIVE & ControlRANGE OF HIGH in a Responsive PRESSURE Package HEAVY LIFT CYLINDERS R_G SINGLE & DOUBLE ACTING,
Specifications. Construction. 2 port valve/series VHK2 3 port valve/series VHK3. Component Parts. Standard style. Standard style
Finger Valve eriesvhk Large effective area: to mm 2 mall knob operating force: 0.43 to 1.4 kgfcm Poppet valve construction with few seal defects The series begins with the min. tube O.D. of. election from
Dorsey Standard Bore Gages
Dorsey Standard Bore Gages A time proven design made better by Dorsey This design of rugged production line bore gages has been an industry standard for more than 75 years. Dorsey offers precise replacement
Materials: Rigid PVC body, PVC end plugs, PVC reinforcement cuff, Stainless steel cuff bands
PVC PRESSURE VESSELS AMI.5 DIAMETER, 00 PSI, U-PIN STYLE Attractive.5 PVC pressure vessels available for 14, 1 & 40 length membranes. This style is designed for direct connection to /Applied Membranes
BUTTERFLY VALVES. Toll Free (877) - ICFLUID -2-
BUTTERFLY VALVES 1. General HyrdoWer is a globally recognized manufacturer of power unit accessories. They have become specialists in the design of Butterfly Valves and Hydraulic Compensators. The shut
Pilot Operated Check Valves Catalog Quick Reference
Quick Reference Pilot to Open Model No. Description Flow* Pressure Page RPC NCS/3 Pilot Operated Check Valve, Pilot to Open.5 l/min [5. US gal/min] RPC NCS/3 35 l/min [9.3 US gal/min] CP5- SDC-3 3 l/min
Multiple Connection Manifolds
ultiple onnection anifolds PNUAYN, IN. atalog 2400 Phone 763-559-0177 ax 763-559-0547 eatures l 2 to 10 stations l Inline anifolds, 90 anifolds, ual Air, unction locks and Terminal locks l ustom designs
Series ZFC. Air Suction Filter In-line Type with One-touch Fittings
CAT.E832- A Air Suction Filter In-line Type with One-touch Fittings Series ZFC An in-line type air suction filter that prevents trouble in vacuum equipment due to contaminants in the air IN/OUT straight
Rev J Terminator Parts Book Page 1 of 15 Top End
1181387 Rev J.2016.03.22 Terminator Parts Book Page 1 of 15 Top End 1181387 Rev J.2016.03.22 Terminator Parts Book Page 2 of 15 Top End (800) 532-8677 (727) 522-8677 fax: (727) 522-1007 Terminator: Frame
P-Series, Lightweight Hand Pumps. Exclusively from Enerpac. 70
-eries, ightweight and umps umps shown, from top to bottom: -802, -842, -202, -142 xclusively from nerpac ylinder Matching hart For help in selecting the correct hand pump for your application, please
SB 452. Spare parts list. Hydraulic breakers. SB 452 s/n BES Construction Tools PC AB No h
SB 452 Spare parts list Hydraulic breakers SB 452 s/n BES043603 2018 Construction Tools PC AB No. 9800088701h 2018-01 General information This spare parts list applies to the following: Part number 8460030070
Check Valves. Pilot Operated Check Valves. Vickers. 4CG-10, 20 Series 4CS-03, 20 Series 4CT-06/10, 20 Series. Basic Characteristics.
Vickers heck Valves Operated heck Valves 4G-10, 20 Series, 20 Series 4T-06/10, 20 Series Typical Section 4T1-06-D*-20-U, illustrating external drain and decompression features asic haracteristics Maximum
![[Instruments for vacuum measurement, checking and adjustment] 3](/thumbs/94/121874202.jpg "[Instruments for vacuum measurement, checking and adjustment] 3")
Pneumatic Powered - Plunger Pumps
Models 42/62/82 D Series P.O. Box 80769 Lafayette, LA 70598-0769 (337) 235-9838 FAX (337) 235-9852 www.sidewinderpumps.com Pneumatic Powered - Plunger Pumps Suggested Installation & Operating Instructions
SIX R (P ) AND SEVEN R (P ) POSITION CYLINDERS Service Information
SIX R431006322 (P -063892-00001) AND SEVEN R431006321 (P -063981--00002) POSITION CYLINDERS Service Information The six and seven position cylinders are medium duty pneumatic positioning devices that operate
Ford Service Saddles and Tapping Sleeves
Section AA 5/2001 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487
Stock Lifters SLME 170 SLMT 170 SLM 300 SPC 800
Product eries ifters tock ifters ME 170 MT 170 M 300 PC 800 Would you like to order this product? All available information at kaller.com FEATURE AND BENEFIT tock ifters KAER tock ifters ME 170, MT 170
Pneumatic Hand Pumps with no Gauge Connection (scissor handle) AP0V (300 psi / 20 bar)
Pneumatic Hand Pumps with no Gauge Connection (scissor handle) AP0V (300 psi / 20 bar) The quickest and most economical way to perform pneumatic field pressure calibrations on pressure transmitters, switches
PN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12
PN LINE PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN
Directional Controls
Vickers Directional Controls Lever Operator Directional Control Valves DG17S-8-**-10 DG17S4-10 **-50 NF D08/D10, ISO-4401-08/10 Released 5/94 681 able of Contents General Information..................................................................................
GS - Parallel Gripper
11: Double acting Patented backlash adjusting system. Long life and reliability, maintenance free. Different options for fastening. Optional magnetic sensors available on page 517. Spring closed (-NC)
Specifications. JIS Symbol 2 port valve 3 port valve (A) 2 (A) 2. Construction. 2 port valve/series VHK2 3 port valve/series VHK3.
Finger Valve eriesvhk Large effective area:.0 to 7.5 mm mall knob operating force: 0. to. kgfcm Poppet valve construction with few seal defects The series begins with the min. tube O.D. of. election from