ECHO INSTRUCTION GUIDE WARNING STATEMENT & INSTRUCTIONS Thank you for your purchase of the Echo Trigger. This product should be used only after

Transcription

1 ECHO INSTRUCTION GUIDE WARNING STATEMENT & INSTRUCTIONS Thank you for your purchase of the Echo Trigger. This product should be used only after reading and understanding these warnings and the instructions accompanying this product. The Echo Trigger should not be used in conjunction with bump fire stocks. Installation of this product in a firearm will enable the firearm to fire on the pull of the trigger and fire on the release of the trigger when the safety selector is switched to the Echo Mode. When the safety selector is in the semi automatic position, the firearm will fire on the pull of the trigger. This trigger when used in either of these positions could result in injury or death to the user or another person. Upon installation of any Echo Trigger, you (defined as the purchaser, possessor or user) are agreeing with this warning, the liability statement below, and the use instructions set forth herein or online. If you do not agree, you must present the product back to your dealer for a refund (restocking fee may apply) within 7 days of purchase so long as the product has not been used or opened. Firearms are the inherently dangerous. Complete safety is essential in possessing, handling, and operating any firearm on which this product is installed. By purchasing, possessing or using this product, you confirm your understanding and agreement to follow all applicable local, state, and federal laws and regulations, and take full responsibility for your own actions, both intentional and unintentional. Never use this product while under the influence of alcohol or drug (prescription or non-prescription). It is your responsibility to assure that the firearm on which this product is installed is safely handled, fired, and stored at all times. You acknowledge that you are solely accountable for your own actions relating to the handling, firing, and storing of the firearm and this product. FosTecH specifically disclaims all responsibility for any death, injury, or damage that may occur because of, or as a result of modification and/or the use or attempted use, of any FosTecH product in conjunction with any firearm. Children are attracted to and can operate firearms that can cause severe injuries or death. Prevent child access by always keeping guns locked and away and unloaded when not in use. If you keep a loaded firearm where a child obtains and improperly uses it, you may be fined or sent to prison in certain states. FosTecH will not repair any damage to product due to your modification, attempted modification, use or attempted use of the product in conjunction with any firearm other than the specific model and caliber for which the product is specifically intended. FosTecH products are carefully engineered with your safety in mind any actual or attempted modifications could result in a fatal accident. FosTecH expressly disclaims any implied warranties, including the implied warranties of merchantability and/or fitness for use. Under no circumstances will FosTecH, or any of its parents, affiliates or vendors (or any officers, directors, employees or agents of the parties, or its parents, affiliates or vendors) be liable for any indirect, incidental, consequential, special or exemplary damages (however or whenever arising), including, without limitation, death, damages for lost revenue, lost profits, anticipated profits, lost business or personal injury. By purchasing, handling, possessing, installing, and or operating, this product, you agree that you have read and understand these warnings and instructions, and expressly and unequivocally agree to these terms and conditions of use for this FosTecH product. If you find any of these terms unacceptable, you must return this product unused for a refund within 7 days of purchase. (May be subject to a restocking fee) The Echo Trigger is an engineering breakthrough that incorporates several different technologies. The Echo Trigger utilizes HIPERFIRE technology and FosTecH licenses this technology from HIPERFIRE US Patent (HIPERFIRE toggle spring system). HIPERFIRE is a registered trademark of High Performance Firearms, LLC The Echo Trigger is also protected under several patents and patent pending patents from FosTecH. These patents include but are not limited to US Patent ,

2 The Echo Trigger includes the following items: INSTALLATION A. Echo Trigger Main Housing B. Trigger Lock C. Trigger Lock Spring D. Detent Cap E. Selector Cam F. Selector Cam Screw G. Selector Lever H. Stripped Carrier With Gas Key A. Echo Trigger Main Housing B. Trigger Lock C. Trigger Lock Spring D. Detent Cap E. Selector Cam F. Selector Cam Screw G. Selector Lever (Short) H. Stripped Carrier with Gas Key

3 Assembly of Trigger Lock #2 #1 #3 Pay close attention to place the detent inside the (B.) trigger lock. Bottom of (B.) trigger lock rests on lower part of (A.) main trigger housing 1. Place (C.) Trigger Lock Spring into (B.) Trigger lock. 2. Squeeze on rocker arm so that you can place the (B.) Trigger lock into the appropriate position.

4 #2 #1 #3 # Align flat edge of detent cap to selector cam #4 #6 Place completed Echo Trigger into your AR-15 receiver Insert trigger pins into their appropriate positions Insert safety selector cam Pay attention to the flat edge of the detent cap and align it correct to selector cam. Insert detent cap onto the selector cam. Use the selector cam screw to attach the selector lever (short) and tighten down. You can now use your safety detent and grip (not included) to finish your assembly. ****Make sure and insert your trigger pins from the left hand side of the rifle. This is the side of the rifle that is pictured in #3 above.****

5 The Echo Trigger comes standard with a stripped bolt carrier. The schematic below shows the process of moving your parts to the Echo carrier to complete your bolt carrier group (BCG). 1. From your BCG remove #2(firing pin retain pin). You can then remove your firing pin 2. Rotate and lift out #3(cam pin) and then remove your bolt assembly. 3. Using you re the stripped carrier that came with your Echo trigger reassemble in reverse order. If you have any questions please do not hesitate to contact FosTecH at FOSTECH sales@fostech.us