POWR-BLOKS Distribution/Splicer Blocks and Covers
|
|
|
- Felicity Rodgers
- 6 years ago
- Views:
Transcription
1 SPECIFICATIONS Voltage : 600V erage: Based on NEC Table , using 75 C copper wire Material: Phenolic rated at 150 C and Thermoplastic rated at 125 C (LD1400 and LS1300 series only) : Standard: Highly conductive aluminum, tin plated Copper: Highly conductive copper, tin plated Flammability : 94V-0 Approvals: UL Recognized (File No. E171395) CSA Certified (File No. LR700111) ORDERING INFORMATION POWR-BLOKS power distribution and splicer blocks offer a safe, convenient way of splicing cables, providing a fixed junction tap-off point, or splitting primary power into secondary circuits. Blocks have one or two primary inputs, with up to twelve secondary outputs per pole. The number of poles available ranges from one to four. APPLICATIONS Typical applications include heating, air conditioning and refrigeration systems, elevator systems, material handling equipment, control panels, motor controls, switchgear, and anywhere power needs to be distributed to more than one load. CONNECTORS Box lug connectors are designed for use with a single, solid or class B or C stranded conductor. Use of more than one conductor per connector opening or use of extra-flexible, fine stranded conductors, such as welding cable, voids the UL Listing, and may cause overheating. Manufacturers of cable terminations can furnish crimp-on sleeves for fine stranded conductors which permit these conductors to be used with box lugs. Distribution Block Covers Power Distribution Block Covers provide protection against accidental shorting between poles caused by loose wires, tools or other conductive material. They also protect personnel from accidentally contacting energized connectors. Distribution Block Example Part No. L D Distribution Block Part LPBC0-2 LPBC0-3 LPBC2-1 LPBC2-2 LPBC2-3 LPBC3-1 LPBC3-2 LPBC3-3 LPBC4-1 LPBC4-2 LPBC4-3 LPBC5-1 LPBC5-2 LPBC5-3 Series No. For use with Power Distribution Block No. LX0XXX-2 LX0XXX-3 LX2XXX-1 LX2XXX-2 LX2XXX-3 LX3XXX-1 LX3XXX-2 LX3XXX-3 LX4XXX-1 LX4XXX-2 LX4XXX-3 LX5XXX-1 LX5XXX-2 LX5XXX-3 Splicer Block Example Part No. L S Splicer Block AMPERE RATINGS The ampere rating per pole for power distribution blocks is based on the line ampacity of 75 C insulated conductors per NEC Table If 60 C insulated conductors are used, load must not exceed the ampacity of 60 C conductors. Use of conductors rated in excess of 75 C is permitted (for example 90 C), however, load must not exceed the ampacity of 75 C conductors. SPECIFICATIONS Material: 0.06 clear plexiglas. FEATURES Two thread-cutting screws are furnished for each cover. Covers are slotted for easy installation. Covers available for all Power Distribution Blocks...see below. Power Distribution/Splicer Block Cover Selection Guide & Dimensions Series No. 111
2 Distribution Block Selection Guide #2 - #14 1 #10 - #18 4 LD LD14001Z #2 - #14 1 #10 - #18 4 LD LD14002Z #2 - #14 1 #10 - #18 4 LD LD14003Z #2 - #14 1 #10 - #18 4 LD LD14004Z /0 - #14 1 #4 - #14 6 LD LD04012Z /0 - #14 1 #4 - #14 6 LD LD04013Z /0 - #14 1 #4 - #14 4 LD LD04022Z /0 - #14 1 #4 - #14 4 LD LD04023Z #4 - #14 6 LD LD04042Z #4 - #14 6 LD LD04043Z /0 - #14 1 #4 - #14 4 LD LD25701Z /0 - #14 1 #4 - #14 4 LD LD25702Z /0 - #14 1 #4 - #14 4 LD LD25703Z /0 - #14 1 #4 - #14 4 LD LD29701Z /0 - #14 1 #4 - #14 4 LD LD29702Z /0 - #14 1 #4 - #14 4 LD LD29703Z mcm - #6 1 #2 - #14 4 LD LD35521Z mcm - #6 1 #2 - #14 4 LD LD35522Z mcm - #6 1 #2 - #14 4 LD LD29703Z mcm - #6 1 #2 - #14 6 LD LD35531Z mcm - #6 1 #2 - #14 6 LD LD35532Z mcm - #6 1 #2 - #14 6 LD LD29733Z /0 - #14 2 #4 - #14 6 LD LD35551Z /0 - #14 2 #4 - #14 6 LD LD35552Z /0 - #14 2 #4 - #14 6 LD LD35553Z #2 - #14 6 LD LD39531Z #2 - #14 6 LD LD39532Z #2 - #14 6 LD LD39533Z /0 - #14 2 #4 - #14 6 LD LD39551Z /0 - #14 2 #4 - #14 6 LD LD39552Z /0 - #14 2 #4 - #14 6 LD LD39553Z #2 - #14 6 LD LD45511Z #2 - #14 6 LD LD45512Z #2 - #14 6 LD LD45513Z mcm - #6 1 #2 - #14 8 LD LD45601Z mcm - #6 1 #2 - #14 8 LD LD45602Z mcm - #6 1 #2 - #14 8 LD LD45603Z #2 - #14 12 LD LD55521Z #2 - #14 12 LD LD55522Z #2 - #14 12 LD LD55523Z /0 - #14 6 LD LD55791Z /0 - #14 6 LD LD55792Z /0 - #14 6 LD LD55793Z mcm - #4 2 2/0 - #14 8 LD LD55861Z mcm - #4 2 2/0 - #14 8 LD LD55862Z mcm - #4 2 2/0 - #14 8 LD LD55863Z /0 - #14 4 LD LD55871Z /0 - #14 4 LD LD55872Z /0 - #14 4 LD LD55873Z 112
3 Distribution Block Selection Guide mcm-#4 2 #4 - #14 12 LD LD55921Z mcm-#4 2 #4 - #14 12 LD LD55922Z mcm-#4 2 #4 - #14 12 LD LD55923Z mcm-#4 1 #2 - #14 8 LD LD55941Z mcm-#4 1 #2 - #14 8 LD LD55942Z mcm-#4 1 #2 - #14 8 LD LD55943Z mcm-#4 2 2/0 - #14 8 LD LD59861Z mcm-#4 2 2/0 - #14 8 LD LD59862Z mcm-#4 2 2/0 - #14 8 LD LD59863Z mcm-#4 2 #2 - #14 12 LD LD59921Z mcm-#4 2 #2 - #14 12 LD LD59922Z mcm-#4 2 #2 - #14 12 LD LD59923Z Splicer Block Selection Guide mcm-# mcm-#6 1 LS LS03032Z mcm-# mcm-#6 1 LS LS03033Z #2 - #14 1 #2 - #14 1 LS LS13001Z #2 - #14 1 #2 - #14 1 LS LS13002Z #2 - #14 1 #2 - #14 1 LS LS13003Z #2 - #14 1 #2 - #14 1 LS LS13004Z /0 - #18 1 1/0 - #18 1 LS LS21211Z /0 - #18 1 1/0 - #18 1 LS LS21212Z /0 - #18 1 1/0 - #18 1 LS LS21213Z #2 - #14 1 #2 - #14 1 LS LS25521Z #2 - #14 1 #2 - #14 1 LS LS25522Z #2 - #14 1 #2 - #14 1 LS LS25523Z /0 - #14 1 2/0 - #14 1 LS LS25721Z /0 - #14 1 2/0 - #14 1 LS LS25722Z /0 - #14 1 2/0 - #14 1 LS LS25723Z mcm-# mcm-#6 1 LS LS31231Z mcm-# mcm-#6 1 LS LS31232Z mcm-# mcm-#6 1 LS LS31233Z mcm-# mcm-#6 1 LS LS31241Z mcm-# mcm-#6 1 LS LS31242Z mcm-# mcm-#6 1 LS LS31243Z mcm-# mcm-#6 1 LS LS31261Z mcm-# mcm-#6 1 LS LS31262Z mcm-# mcm-#6 1 LS LS31263Z mcm-# mcm-#4 1 LS LS45571Z mcm-# mcm-#4 1 LS LS45572Z mcm-# mcm-#4 1 LS LS45573Z mcm-# mcm-#4 2 LS LS51291Z mcm-# mcm-#4 2 LS LS51292Z mcm-# mcm-#4 2 LS LS51293Z mcm-# mcm-#4 2 LS LS53011Z mcm-# mcm-#4 2 LS LS53012Z mcm-# mcm-#4 2 LS LS53013Z 113
4 LX0XXX.07" [1.8].218 x.375" [5.5 x 9.5]SLOT.07" [1.8].218 x.375" [5.5 x 9.5]SLOT 2.90" [73.7] 2.90" [73.7] 1.00" [25.4] 1.00" [25.4] 3.52" [89.3] [85.8] [104.8].65 x.375" [6.7 x 9.5] SLOT 4.73" 4.63" [118] 5.38" [137].265 x.375" [6.7 x 9.5] SLOT [85.8] 2 POLE 3 POLE Figure 1 LX2XXX 1.13" [28.6] 1.94" [49.2].205 [5.2] DIA. HOLE 1.62" [42].63" [16.1] 2.75" [69.9] 1.78" [45.2].62" [16].62" [16] Figure 2 LX3XXX [25] 1.94" [49.3] (25) 3.47" [88.1] 1.53" [38.9] [25] 5.00" [127.0] 1.53" [38.9] 2.61" [66.2] [102] (85.7) [102] (85.7) [85.7] [101.6] Figure 3 114
5 LX4XXX 2.28" [57.9] 4.16" [106] 1.88" [47.8] 6.04" [153] 1.88" 1.88" [47.8] [47.8] 2.92 (74.0) Figure 4 LX5XXX 3.17" [80.4] 5.88" [149] 2.69" [68.2] 8.54" [217] 2.69" [68.2] 2.30" [58.5] 3.12" [79.2] (9.5) [9.5] [9.5] Figure 5 115
powr-bloks POWR-GARD Fuseblocks Distribution/Splicer Blocks and Covers Applications Connectors Description Ampere Ratings Specifications
powr-bloks Applications Typical applications include heating, air conditioning and refrigeration systems, el e va tor systems, material handling equipment, control panels, motor controls, switchgear, and
POWR-BLOKS GUIDE TO DISTRIBUTION BLOCKS WITH HIGH SHORT-CIRCUIT CURRENT RATINGS (SCCR)
POWR-BLOKS TM GUIDE TO S WITH HIGH SHORT-CIRCUIT CURRENT RATINGS (SCCR) REQUIRED (Kcmil/AWG) (2) CLASS / SERIES / MAX AMP RATING (3) CCMR, KLDR IN RMS SYM AMPS (1) LS1300-1 1 LS1300-2 2 115 (1) 2-14 (1)
C-Line Electrical Connectors
C-Line Electrical Connectors Product Catalog (417) 532-7121 PO Box 908 722 Durham Rd Lebanon, MO 65536 Manufactured by: PO Box 908 722 Durham Rd Lebanon, MO 65536 Company Information C-Line Electrical
PRODUCT SPECIFICATION
MINI-FIT SR. SERIES 1.0 SCOPE This specification covers the 10.00 mm / (.394 in.) centerline tin and gold plated connector series, single and dual row versions in wire to wire and wire to printed circuit
Socket P2RF-05-S P2RF-08-S Clip & Release Lever Nameplate R99-11
Screwless Clamp Terminal Socket P2RF@@S Screwless clamping greatly contributes to reducing wiring time. No over or under tightening of cable connection so better contact reliability is achieved. Double
GENERAL APPLICATION NOTES
GENERAL APPLICATION NOTES There are common considerations when using our connectors. Additional considerations may apply based on the particular connector being used, the application, and conditions in
The accuracy and safety of the connected measuring devices are directly regulated. of the introduced current transformers.
Product family Current transformers Current transformers (CTs) are introduced where it is difficult to access a direct measuring ot network current. Current transformer transforms the high network current
Primary Terminals & Connectors
Primary & Pure electrolytic copper with electro-tin plating for corrosion resistance Deep internal serrations promote firm wire grip for maximum strength Insulation (where applicable) is color coded to
EPIC Rectangular Connectors HBE Series
HBE Series The HBE series inserts are suitable for applications with high voltages and current. The inserts can be terminated in a variety of ways: screw, crimp, or spring cage clamp. TECHNICAL DATA Number
Differential pressure switch / Lube oil protection control MP 54 and MP 55
Data sheet Differential pressure switch / Lube oil protection control MP 54 and MP 55 MP 54 and MP 55 oil differential pressure switches are used as safety switches to protect refrigeration compressors
PAGE INDEX PAGE # CATALOG NUMBER BUS SUPPORTS B 1 AWSTFR BUS SUPPORTS B 2 AWTTFR BUS SUPPORTS B 3 AWTESR BUS SUPPORTS B 4 AWLI BUS SUPPORTS B 6 AACB
PAGE INDEX ABS ABS (2) ATSBS ABR AIWBS AUAB UAS AABS AAS AL ALS ATCF ATCC CL BTCF RS APT ALC AV ALT ALT (N) ATCF U AWCF AW2CF AWTT AWTT 15 AWTT2 AWST DESCRIPTION MULTI RANGE SINGLE CABLE MULTI RANGE DOUBLE
COOPER POWER SERIES. 200 A 15/25 kv class deadbreak straight connector installation instructions. Deadbreak Apparatus Connectors MN650043EN
Deadbreak Apparatus Connectors MN650043EN Effective February 2017 Supersedes October 2004 (S550-12-1) 200 A 15/25 kv class deadbreak straight connector installation instructions COOPER POWER SERIES DISCLAIMER
EPIC Rectangular Connector Inserts. HBE Series. Technical Data Number of Contacts:
HBE Series HBE series inserts provide reliable termination and performance in the vast majority of medium power and control applications. Methods of termination include screw, crimp, and spring cage clamp.
Amphenol. PowerLink Solar Cables. Amphenol 97 Series Connectors are UL recognized and CSA recognized.
Amphenol PowerLink Solar Cables www.amphenol-industrial.com Amphenol 97 Series Connectors are UL recognized and CSA recognized. PowerLink Solar Cables Amphenol s single conductor PowerLink Solar Cables
Miniature controls. Contactors. Overload relays. Starters. Control relays
Contactors Overload relays Starters Control relays Description General features Wiring terminations available include plugon connectors, wire pins for PC board mounting and solder connections Low power
The Limit Switch with Better Seal, Shock Resistance, and Strength. General-purpose Limit Switch. Model Number Structure
General-purpose Limit Switch CSM_DA-_N_DS_E The Limit Switch with Better Seal, Shock Resistance, and Strength A double seal on the head, a complete gasket cover, and other features ensure a better seal
Safe Schools: A Health and Safety Check
Name of School: Optional Information Date of Inspection: Vocational Program/Course/Room: Signature of Inspector: Use of Electrical Equipment Self-Inspection Checklist Guidelines: This checklist covers
OTL Universal terminals
OTL Universal terminals 2019 Universal terminals OTL Universal terminals OTL 1000 V AC/DC Bimetal (AL/CU) Class A Certified according to standards EN 612381 and EN 6094771 2 Universal terminals OTL Universal
M8, M12, M18, M30 Cube 40 x 40 mm. 2 mm 15 mm 2 mm 15 mm 20 mm 40 mm
Bulletin 872C, 871TM, 871FM, 871C, 871P Product Line Overview Proximity Sensors (872C, 871TM, 871FM) 6 / 2011 Features Bulletin 872C 871TM 871P Size Sensing Range Standard Sensing Range Extended Sensing
Differential Pressure Control Types MP 54, MP 55 and MP 55A
MAKING MODERN LIVING POSSIBLE Data sheet Differential Pressure Control Types MP 54, MP 55 and MP 55A MP 54 and MP 55 oil differential pressure controls are used as safety switches to protect refrigeration
DT400/436 Tee Connector Installation Instructions
Connectors Lorem ipsum and dolor Splices sit Amat Effective September 2014 Supersedes IS550-30-1 March 2011 MN650001EN DT400/436 Tee Connector Installation Instructions DISCLAIMER OF WARRANTIES AND LIMITATION
Florida Building Code 6 th Edition (2017) Residential. Broward County Edition Loose-leaf Supplement
Board of Rules and Appeals FBC 6 th Edition (2017)- Residential - Supplement No. 1 January 1, 2018 Florida Building Code 6 th Edition (2017) Residential File removed pages for reference. Broward County
Differential pressure switch MP 54, MP 55 and MP 55A
Data sheet Differential pressure switch MP 54, MP 55 and MP 55A MP 54 and MP 55 oil differential pressure switches are used as safety switches to protect refrigeration compressors against low lubricating
Check with local zoning official for property line distance requirements.
RESIDENTIAL POOL PLAN SUBMITTAL GUIDELINES The following guidelines are intended to assist municipal residents with the permit acquisition process with regard to pools, spas and hot tubs for single family
Operating Instructions
Operating Instructions Ex d Enclosures in Light Metal / Flameproof Encapsulation > 8265/0 Empty Enclosure > 8265/4 controller, installed in Ex e enclosure > 8265/5 controller Contents 1 Contents 1 Contents...2
![[Instruments for vacuum measurement, checking and adjustment] 3](/thumbs/94/121874202.jpg "[Instruments for vacuum measurement, checking and adjustment] 3")
Operating Instructions
Operating Instructions Light-metal Ex d enclosures / flameproof enclosure > 8265/0 Empty enclosure > 8265/4 Control panel, integrated in Ex e enclosure > 8265/5 Control panel Table of Contents 1 Table
Differential pressure controls, Type MP 54, 55 and 55A
MAKING MODERN LIVING POSSIBLE Technical brochure Differential pressure controls, Type MP 54, 55 and 55A MP 54 and oil pressure controls are used as safety switches to protect refrigeration compressors
QPEO2/037N Credit Value: 15 QCF Level: 2 GLH: 68 Maintaining electrical equipment/systems
Performing Engineering Operations QPEO2/037N Credit Value: 15 QCF Level: 2 GLH: 68 Maintaining electrical equipment/systems Learner Name: 2013 Excellence, Achievement & Learning Ltd EAL Assessment Route
Electrical Contractor s. Labor Units Manual
Electrical Contractor s Labor Units Manual EMT CONDUIT & CONNECTORS EMT THINWALL CONDUIT 1/2" 2.75 3.25 3.75 4.13 4.54 C 3/4" 3.00 3.50 4.00 4.40 4.84 C 1" 3.50 4.00 4.50 4.95 5.45 C 1 1/4" 4.00 4.50 5.00
DEH Instructions. Three-Phase, Platform-Mounted Distribution Transformers
g DEH 40050 Instructions Three-Phase, Platform-Mounted Distribution Transformers Introduction The equipment covered by these instructions should be operated and serviced only by competent technicians familiar
Preferred Instruments Danbury, CT USA
Tank Level Sensor Model TG-EL-WF-xx Installation & Operation Instructions SDI-TG-EL-WF March 6, 2006 Preferred Instruments Danbury, CT USA www.preferredinstruments.com CONTENTS Installation Pg. 2 Calibration
Electrical. OSHA Office of Training and Education 1
Electrical OSHA Office of Training and Education 1 Introduction An average of one worker is electrocuted on the job every day There are four main types of electrical injuries: Electrocution (death due
Monitoring device NTS 30
P R O D U C T I N F O R M A T I O N Electronic level- and temperature monitoring device Monitoring device NTS 30 Contents Description Description... 2 Operating... 3 Design and electrical data... 4 Circuit
MaxSB - Low Voltage Switchboard
BU 3101 Low Voltage Systems, March 2009 Low Voltage Systems MaxSB - Low Voltage Switchboard May 5, 2009 Slide 1 MaxSB Product Overview Description Value Rated Main bus current 1600A, 2000A, 3000A, 3200A,
Position switches FP series
A Position switches FP series Selection diagram 0 08 8 9 0 0 0 Ø 8 mm Ø, mm external rubber stainless steel stainless steel fiber glass rod gasket sphere sphere adjustable lever safety adjustable lever
CABLE CONNECTORS CABLE CONNECTORS
Terminal blocks Terminal blocks E-loks... 4 Multipolar terminal strips... 49 Protected distribution terminals E-Rail... 50 Preinsulated terminals Preinsulated copper terminals... 53 Preinsulated end-sleeve
Selection of Electrical PPE Tables
Selection of Electrical PPE Tables Instructions Table 1 - Starting with Table 1, select the task you plan to do (right-hand column) and the condition of the equipment you will be working on, (center column).
References 6 k thermal overload relays, adjustable from 0.11 to 16 A
s 6 k thermal overload relays, adjustable from 0.11 to 16 A 3-pole relays with screw clamp terminals These overload relays are designed for the protection of motors. They are compensated and phase failure
Wire Buddy Manual IOpath Software
Wire Buddy Manual IOpath Software Wire Buddy is a calculation reference tool for Electricians and Maintenance personnel. Wire Buddy was created for the Maintenance Electrician. There are many occasions
AMTEC SUPPORT GRIPS STANDARD, HEAVY DUTY & CONDUIT GRIPS
AMTEC SUPPORT GRIPS STANDARD, HEAVY DUTY & CONDUIT GRIPS DESIGNED TO HOLD THE WEIGHT FOR ELECTRICAL CABLE AS IT HANGS IN VERTICAL, SLOPING OR HORIZONTAL POSITIONS. EASILY INSTALLED AND REMOVED USING NO
Differential pressure controls/ Lube oil protection controls MP 54 and MP 55 REFRIGERATION AND AIR CONDITIONING. Technical leafl et
Differential pressure controls/ Lube oil protection controls MP 54 and MP 55 REFRIGERATION AND AIR CONDITIONING Technical leafl et Contents Page Introduction... 3 Features... 3 Approvals... 3 Materials
Maintaining electrical equipment/systems
Unit 037 Maintaining electrical equipment/systems Level: 2 Credit value: 15 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover
I.H.S INSTALLATION INSTRUCTIONS
I.H.S INSTALLATION INSTRUCTIONS TOOLS REQUIRED The following tools will be required for installation of your I.H.S. system. Item Qty Needed 9/16 Open End Wrench 2 3/4 Open End Wrench 1 1/2 Open End Wrench
PANDUIT Copper Compression Metric Lugs and Splices
Compression etric ugs and Splices Optimum reliability and safety With etric s Worldwide availability RoHS compliant Class 2R rigid stranded conductor sizes 4mm 2 630mm 2 Key Features and enefits Two-Hole
ACCESSORIES. Standard packing
ACCESSORIES HC RELAYS (Sockets and Terminal ) FEATURES. HC Relay Sockets In the table below, the suitable for each type of HC relay is indicated by a black dot. ) Plug-in type, type, and wrapping type
S Surge Arresters
Surge Arresters UltraSIL Polymer-Housed VariSTAR Type US, UH, and UX Station-Class Surge Arresters Installation and Maintenance Instructions Service Information S235-88-1 Contents Product Information...........................1
How to terminate an F/UTP CAT 6 cable with the LP-LRJ458P8CC6FS21 Plug.
Cabling Systems - Copper Solutions How to terminate an F/UTP CAT 6 cable with the LP-LRJ458P8CC6FS21 Plug. LPLRJ458P8CC6FS21_M123_ENB01W How to terminate an F/UTP CAT 6 cable with the LP-LRJ458P8CC6FS21
Ground Fault Circuit Interrupter(GFCI) Policy
NewStar Netronics, LLC American Products for the World Ground Fault Circuit Interrupter(GFCI) Policy 3926 East 3 rd Street Tulsa, OK 74112 Phone (918)894-5006 Fax (918)836-9909 tech@newstarnetronics.com
Type MMV Medium Power Cable
7-05 Type MMV Medium Power Cable Single Conductor: 5kV 5kV, 00% & % Insulation Levels. Rated 90 C Multi-Conductor: 5kV 5kV, 00% & % Insulation Levels. Rated 90 C Conductors Soft annealed flexible stranded
THE BEST SELECTION OF QUALITY TWIST-ON WIRE CONNECTORS UNDER ONE BRAND
THE BEST SELECTION OF QUALITY TWIST-ON WIRE CONNECTORS UNDER ONE BRAND History since 1914 2 Packaging Choices 3 NE W 833 Wide Range / Ergonomic Compact Design 4 Marrette XTP 6 Marrette Type II Winged 8
COOPER POWER SERIES. 200 A 15/25 kv class elbow installation instructions. Deadbreak Apparatus Connectors MN650042EN
Deadbreak Apparatus Connectors MN650042EN Effective February 2017 Supersedes December 2009 (S550-10-1) 200 A 15/25 kv class elbow installation instructions COOPER POWER SERIES DISCLAIMER OF WARRANTIES
Instructions for Installing and Operating Clark Reliance EA101 Series Levalarm
Instructions for Installing and Operating Clark Reliance EA101 Series Levalarm This manual covers the following model numbers: EA101D, EA101S, and EA101SW STORAGE and HANDLING All units should be inspected
ServicePlus S21R & S27R Series 2 Installation Instructions
ServicePlus S21R & S27R Series 2 Installation Instructions Horstmann Controls ServicePlus two channel service interval programmers have been developed to facilitate compliance with the Gas Safety (Installation
SPECIFICATIONS ATTENTION
VPS 504 S06 Installation Manual - P/N 80122 - Ed. 01/09 VPS 504 S06 and S05 Valve Proving System Installation Instructions VPS 1 6 Gases Natural gas, air and other inert gases. NOT suitable for butane
*NOTE: 75 OHM SERIES CONNECTORS ARE NOT INTERMATEABLE WITH THE 50 OHM SERIES.
The Connex N connectors with screw coupling are fully interchangeable with N connectors made to the MIL-C-39012 specification. Designed for use in all systems where very good R.F. and mechanical performance
will not support combustion
Strain Relief Grips Operating Temperatures Material Temperature Range Aluminum 40 C to +149 C ( 40 F to +300 F) Aluminum deluxe cord grips 34 C to +115 C ( 30 F to +240 F) Non-metallic deluxe cord grips
COOPER POWER SERIES. 600 A 35 kv class PUSH-OP deadbreak connector installation instructions. Deadbreak Apparatus Connectors MN650052EN
Deadbreak Apparatus Connectors MN650052EN Effective May 2017 Supersedes May 2014 (S600-53-3) 600 A 35 kv class PUSH-OP deadbreak connector installation instructions COOPER POWER SERIES DISCLAIMER OF WARRANTIES
Pressure switch KP-E. Data sheet
Data sheet Pressure switch KP-E KP-E pressure switches for use in refrigeration and air conditioning systems are equipped with SPDT gold plated contacts and stainless steel bellows. The high pressure switches
General Requirements of the NEC Advanced Course. Building Officials and Inspectors Educational Association
General Requirements of the NEC Advanced Course Building Officials and Inspectors Educational Association General Requirements -NEC Course Outcome Explain general requirements found in Article 110 of the
A28 Series Two-Stage Temperature Controls with NEMA 1 Enclosure
Master Catalog 125 Temperature Controls Section A Product Bulletin A28 Issue Date 0618 A28 Series Two-Stage Temperature Controls with NEMA 1 Enclosure Application These two-stage controls are designed
600 A 35 kv class PUSH-OP deadbreak connector installation instructions
Deadbreak Apparatus Connectors Effective May 2014 Supersedes January 2014 600 A 35 kv class PUSH-OP deadbreak connector installation instructions S600-53-3 DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY
COOPER POWER SERIES. DE250 deadbreak elbow connector installation instructions interface A. Screened Separable Connectors MN650025EN
Screened Separable Connectors MN650025EN Effective November 2016 Supersedes September 2013 (IS550-10-1) DE250 deadbreak elbow connector installation instructions interface A COOPER POWER SERIES DISCLAIMER
Ground Fault Protection for Electrical Tools
Hanover Risk Solutions Ground Fault Protection for Electrical Tools Effective electrical tool and equipment grounding are extremely important on construction sites. Injuries and deaths can result from
Welding With Arc Welding Equipment
Optional Information Name of School: Date of Inspection: Vocational Program/Course/Room: Signature of Inspector: Welding With Arc Welding Equipment Self Inspection Checklist Guidelines: This checklist
REMKE STYLE PowR-TECK CONNECTORS
REMKE STYLE PowR-TECK CONNECTORS CONNECTORS FOR JACKETED TECK CABLE Your LEAD BRAND in the changing market EXPERIENCE THE POWR OF A ONE PIECE DESIGN COMPRESSION RING Downward pressure ensures uniform compression
Introduction. P r otective Seals Panel seal for One Hole Mounting (OHM) O-Ring seals for panel mounting Switch boots
SECTION F Introduction ACCESSORIES Switch Guar d s Prevent accidental operation of switches Switch operation limited to selected functions Adaptable to one, two and four pole config u r a t i o n s One
YSLY-JZ YSLY-OZ. Low voltage - Energy, cabling, signalling and control
Low voltage - Energy, cabling, signalling and control YSLY-JZ YSLY-OZ Construction: VDE Reg. n 7509 according to VDE 0281 Teil 13 according to DIN EN 50525-2-51 Flame propagation: DIN EN 60332-1-2 Low
Operating Instructions
LPL Series LED Pendant Lighting Operating Instructions IM0102 COOPER Electronic Technologies (Shanghai) Co., Ltd. No. 955 Shengli Road, East Area of Zhangjiang High-Tech Park, Shanghai 201201 China 1.
Product Safety and the use of EMC techniques to evaluate the 30 Amp Ground continuity test
Product Safety and the use of EMC techniques to evaluate the 30 Amp Ground continuity test Ron Duffy Product Safety Engineer Agilent Technologies, Inc ron_duffy@agilent.com Richard Georgerian Product Compliance
Copper Bonded Ground Rod / Grounding Rods / Copper Bonded Earth Rod / Earthing rods
Copper Bonded Ground Rod / Grounding Rods / Copper Bonded Earth Rod / Earthing rods Copper bonded earth rods are made from low carbon Steel. Earth Rods are molecularly bonded with 99.9% pure electrolytic
Conductor Bushings Series 8174
> Current lead-in for Ex d enclosures > 1 to 72 conductors combined in one current lead-in > Series screw-in plug-in > For voltages up to max. 1 V > For size conductor up to 7 mm 2 www.stahl.de 3163E The
Size Selection & Installation of QSZH-125
Product Installation Procedure (PIP) No: PIP-101 Revision: 2 Dated: January 2012 Title:- Size Selection & Installation of QSZH-125 Prepared By: Name: Clive Benning Date: January 2012 Reviewed & Approved
Aluminum Mechanical Lugs Dual Rated - One Conductor
Dual Rated - One Conductor TA Chamfered wire entry Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 TA-6-S 1 4-14 1/4 17/64 11/16 1-1/16 1/4 1/2 3/32 1/2 41/64 S TA-2 1 One: 2-14 1/4 17/64 11/16 1-5/32 5/16 1/2
TeSys protection components
Presentation, description -pole thermal overload relays TeSys D Presentation TeSys D thermal overload relays are designed to protect a.c. circuits and motors against: b overloads, b phase failure, b excessively
CS10 # Network Safety Performance Objectives (2016)
CS10 #4384287 Network Safety Performance Objectives (2016) Context & Purpose The Horizon Power Network Safety Objectives (2016) (Objective Statement) has been prepared for each of network safety performance
UBEC 1AT. AUTO TANK Fill System Installation, Operation, & Setup Instructions
Document Number: XE-ATA5PM-R1A UBEC 1AT AUTO TANK Fill System 08899155 Installation, Operation, & Setup Instructions Rev170906-EB-FRC PHYSICAL: 1302 WEST BEARDSLEY AVE ELKHART, IN 46514 WWW.ELKHARTBRASS.COM
Electrical TP-21 November 2017 ELECTRICAL TECHNICAL PAPER 21 VISUAL AIR NAVIGATION FACILITIES: AIR FACILITY EQUIPMENT INSPECTION AND TESTING
ELECTRICAL TECHNICAL PAPER 21 VISUAL AIR NAVIGATION FACILITIES: AIR FACILITY EQUIPMENT INSPECTION AND TESTING Information in this technical paper was excerpted from previous versions of UFC 3-535-01. This
PART I. GENERAL REQUIREMENTS FOR PERMANENTLY INSTALLED POOLS, STORABLE POOLS, OUTDOOR SPAS, OUTDOOR HOT TUBS, OR FOUNTAINS
The overriding concern of Article 680 is to keep people and electricity separated. Some ways in which Article 680 accomplishes this include: References to other articles. Equipment Requirements. Any equipment
UHF/Mini-UHF Coaxial Connectors
UHF/MiniUHF Coaxial Connectors The Amphenol UHF/MINIUHF connectors are popular and economical, used when impedance mating is not required. General purpose units are designed to operate satisfactorily op
Evaluation of Ground Ring vs. Equipotential Mat at a Swimming Pool in Buford, Georgia
Evaluation of Ground Ring vs. Equipotential Mat at a Swimming Pool in Buford, Georgia NEETRAC Project -132 August, 2 A Research Center of the Georgia Institute of Technology Requested by: Reuben Clark
COOPER POWER SERIES. DS250 deadbreak straight connector installation instructions interface A. Connectors MN650027EN
Connectors MN650027EN Effective November 2016 Supersedes January 2014 (IS550-11-1) DS250 deadbreak straight connector installation instructions interface A COOPER POWER SERIES DISCLAIMER OF WARRANTIES
Installation, operating and maintenance Instructions for Seemag bypass level indicator
Issue: S Date: 05-09-14 Type G35 General information The Seetru bypass magnetic level indicator, abbreviate SEEMAG, serves to show the filling level of fluids in tanks, basins, tubes etc. The Seemag operates
Med Aire Alternating Pressure Pump and Pad System
User Manual Med Aire Alternating Pressure Pump and Pad System 14002E 14001E Symbols & Statements NOTE Indicates some tips or some information users should be aware of. CAUTION Indicates correct operating
PUR cable. PUR cable. The harmonised version H05BQ-F/H07BQ-F can be used at building construction areas and where HAR-approval is required in Europe.
Polyurethan (PUR) cables are suitable as control cables, for fl exible use where high mechanical stress occurs. The PUR outer jacket has very good resistance against mineral oils and different chemical
SWIMMING POOLS CHAPTER 41
CHAPTER 41 SWIMMING POOLS SECTION E4101 GENERAL E4101.1 Scope. The provisions of this chapter shall apply to the construction and installation of electric wiring and equipment associated with all swimming
MODELS (2 foot Version) (4 foot Version)
INSTALLATION AND MAINTENANCE MANUAL DUROSITE LED LINEAR FIXTURE Document No: 9100-127-2571-99 Rev A April, 2016 MODELS (2 foot Version) (4 foot Version) ALL LAE ALL LBE These instructions contain important
RTA Series 1 4 Poles Coded Rotary Switches
1 4 Poles oded Switches Features/Benefits PB or hand soldering versions Bushing mounting Multiple poles Decimal and hexadecimal codes Screwdriver slot or extended actuator RoHS ompliant Typical Applications
GFCIs and Swimming Pools A Natural Fit
GFCIs and Swimming Pools A Natural Fit Swimming Pool Triangle Most of us have seen or read something about the figure commonly known as the fire triangle (oxygen, heat, and fuel), which is a working model
MV-105 MEDIUM VOLTAGE CABLE. 5kV, 8kV, 15kV, 25kV & 35kV
MV-05 MEDIUM VOLTAGE CABLE 5kV, 8kV, 5kV, 5kV & 5kV MV-05 MEDIUM VOLTAGE POWER CABLE 5kV % INSULATION LEVEL 8kV 00% INSULATION LEVEL Conductor conforming to ASTM B and Class B Compact stranded in accordance
Zelio Relays RSL Slim Interface Plug-In Relays
Zelio Relays RSL Slim Interface Plug-In Relays Catalog 8501CT0901 2009 Class 8501 CONTENTS Description............................................. Page Introduction.................................................3
Nonmetallic T&B Surface Raceway
Nonmetallic Two-Piece System Office White The T&B Two-Piece system is designed to contain everything from THHN conductors to coaxial cable. Made of UL listed 94V-0 PVC, T&B Nonmetallic Surface Raceway
Definitions for swimming pools, fountains, and similar installations in article 680
Definitions for swimming pools, fountains, and similar installations in article 680 Dry-Niche Luminaire. A luminaire intended for installation in the floor or wall of a pool, spa, or fountain in a niche
Item No.: /
mounting types; for parallel or perpendicular mounting; pin spacing mm / 0197 in; 4-pole - Item No: 769- Male connector; with CAGE CLAMP connection and fixing flanges; for screw or similar mounting types;
ELECTRICAL (COMPREHENSIVE) SAFETY PROGRAM REGULATORY STANDARD: OSHA - 29 CFR CFR , ,
ELECTRICAL (COMPREHENSIVE) SAFETY PROGRAM REGULATORY STANDARD: OSHA - 29 CFR 1910.331 335-29 CFR 1926.302, 1926.416, 1926.417 BASIS: The National Safety Council estimates that there are at least 300 deaths
Smart JVA Module WARNING. For use with AquaLink RS systems with rev R firmware or newer.
INstallation and OPERATION Manual Smart JVA Module For use with AquaLink RS systems with rev R firmware or newer. H0370200 Rev C FOR YOUR SAFETY - This product must be installed and serviced by a contractor
G92 Series BASOTROL Automatic Pilot Gas Valve
Installation Instructions Issue Date September 17, 2008 G92 Series BASOTROL Automatic Pilot Gas Valve Installation IMPORTANT: Only qualified personnel should install or service BASO Gas Products. These
Cycling Device Training Manual
NRG POWER, INC. Industrial Electrical Contractors NRG POWER, INC. Phone: 714.424.6484 Industrial Electrical Contractors Fax: 714.424.6477 3011 South Shannon Street email: nrgpower@yahoo.com Santa Ana,
Weatherproof Products
Red ot Iberville arlon Weatherproof Products S oxes and overs pplications : S boxes are S approved for wet locations S device boxes are installed in applications that require a rugged unit to accept wiring
Junction Boxes Series 8118
> Enclosure in glass fibre reinforced polyester resin > 3 different sizes available with 4, 5 or as a junction box with integrated miniature fuse: 3 terminals and 1 miniature fuse 7 terminals and 1 miniature